CCNP-RS

Routing Switching Tigers Forum Join

CCNP R&S Renewed experience and content with

Ingenious 69 practice LABs Daily Morning: 08:00am to 10:30am Daily Evening: 05:00pm to 07:30pm Sunday Only Afternoon: 02:30am to 6:30pm Fast Track Daily Afternoon: 01:00pm to 05:30pm

fees refund if you are not an expert Mentor: Vagish Dwivedi Vinod: 9819059899, 9167224466, 9820611290. www.rstforum.net

www.rstforum.net

RSTFORUM AT GLANCE FOR YOU CONNECTING YOUR BUSINESS TO THE TECHNOLOGY SKILLS YOU NEED Every year, RSTForum provides training to thousands of students worldwide and imparts the skills needed to build, design, and maintain, networks and IT infrastructure—improving their career prospects while filling the global demand for networking professionals. With 5 academies in India and operations being setup in Dubai and Kenya Africa, RST Forum helps individuals

prepare for industry-recognized certifications and IT and communication technology careers in virtually every type of industry. Students develop foundational skills in information & communication technology while acquiring vital 21st-century career skills in problem solving, collaboration, and critical thinking. RST Forum runs one of the world’s largest class room with about 250-300 students studying professional courses together at a location. Candidates’ complete hands-on learning activities and simulations to develop practical skills to fill a growing need for IT professionals globally

flexible solutions for your training needs

GLOBAL CHALLENGE The growth of networks and absorption of technology has created a shortage of skilled people to build, design and

IT TRAINING SOLUTIONS

maintain the infrastructure needed to communicate and do

• Cisco certifications • Microsoft certifications • Redhat Linux certifications • HP Unix & Networking • Datacenter & Storage • Cloud & Virtual computing • 3G / 4G / Telco solutions • Security & Ethical Hacking • Voice solutions • MPLS & SP solutions • Wireless & Microwave.

business. This shortage exists worldwide, particularly in emerging countries where infrastructures are being built to aid in economic development and growth. Likewise, people need access to more and better job opportunities and training that will prepare them for the global, technologydriven economy. RST Forum helps meet the growing global demand for Infrastructure and communications technology professionals and improves career prospects for IT&C professionals.

www.rstforum.net

SUCCESSFUL CAREER RSTForum has trained more than 60000 students to date. Many students have gone on to successful careers in a variety of industries, while others have harnessed the entrepreneurial spirit and knowledge they acquired in RST Forum to start their own businesses and create new jobs.

GLOBAL PARTNERSHIP RSTForum with its deep rooted industry connection has helped students in placements. RSTForum collaborates with companies to understand their staffing requirements and

works with potential candidates to enhance their skills and make them ready for companies’ requirement. authorized training partners of Cisco, Microsoft, Redhat and many educational institutions, non profits organizations. RST Forum also provides online curricula, teacher training, and professional development for instructors. RST Forum helps students prepare to assume information & communication technology jobs, pursue additional training or education, and learn globally recognized certification so they can maintain IT Infrastructure and networks that form the core of today's -and tomorrow's global economy. Courses are offered in multiple languages through a blended learning model that combines classroom instruction with online curricula blended learning model that combines classroom instruction with online curricula, interactive tools and hands-on activities

IT STAFFING SOLUTIONS RSTForum with its deep rooted industry connection has helped students in placements. RSTForum collaborates with companies to understand their staffing requirements and works with potential candidates to enhance their skills and make them ready for companies’ requirement.

LABS ON CLOUD RSTForum uses Cloud computing to efficiently provide “Platform As A Service” (PAAS) to its students enabling them to quickly access Technology Racks over the internet and practice lab exercise from home These Racks are populated with latest equipment's required for practical exercises'.

WEB FORUM RST Forum’s web based forum allows its users to ask, hundreds of technical experts about their technology and certification problem. RST forum is a tight knit community of working professionals that provide timely help on technical, certification and design related queries.

www.rstforum.net



DURATION 9 10 WEEKS (SUNDAY ONLY) MORNING 2:30 – 06:30 (4hrs.) 9 21 DAYS (MON- FRI) MORNING 08:00AM (3hrs.) EVENING 05:00PM (3hrs.)

CCNP R&S For network engineers who need to increase their value to employers and stay current with advances in networking knowledge and skills, the cisco CCNP routing and switching certification program provides the education and training

required for installing, monitoring, and troubleshooting network infrastructure products designed by the industry leader in IP networking.

9 CRASH COURSE AVAILABLE

PRACTICAL SESSION 9 HANDS-ON PRACTICALS ON ROUTER AND SWITCHES 9 LABS ON CLOUD AVAILABLE FOR PRACTICE FROM HOME

HIGHLIGHTS 9 INDUSTRY EXPERIENCED CERTIFIED INSTRUCTORS 9 LIFE TIME CCNP RACK ACCESS FOR EXTRA PRACTICAL SESSIONS

9 LIFETIME REPEATING OF LECTURES ALLOWED INVESTMENT PROTECTION FROM FUTURE UPGRADES. 9 FEES REFUND IF YOU ARE NOT AN EXPERT

The CCNP R&S certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks. CCNP certified professionals have the knowledge and skills to make connections to remote sites via a WAN, and mitigate basic security threats. Cisco CCNP Routing and Switching certification validates the ability to plan, implement, verify, and troubleshoot local- and wide-area enterprise networks. CCNP certified professionals can also work collaboratively with specialists on advanced security, voice, wireless, and video solutions

For network engineers who aspire to plan, implement, verify and troubleshoot local and wide-area enterprise networks, the Cisco CCNP Routing and Switching certification program provides the education and training required to develop hands-on skills and best-practices. This job-role-focused program utilizes lab-based learning and allows you to maximize your investment in your education and increase the value of your enterprise network..

www.rstforum.net



DURATION 9 10 WEEKS (SUNDAY ONLY) MORNING 2:30 – 06:30 (4hrs.) 9 21 DAYS (MON- FRI) MORNING 08:00AM (3hrs.) EVENING 05:00PM (3hrs.) 9 CRASH COURSE AVAILABLE

CCNP R&S training covers (but is not limited to) the use of these topics:The Implementing Cisco IP Routing (ROUTE 300101) is a qualifying exam for the Cisco Certified Network Professional CCNP®, Cisco Certified Internetwork Professional CCIP®, and Cisco Certified Design Professional CCDP® certifications. The ROUTE 300-101 exam will certify that the successful candidate has the knowledge and skills necessary to use advanced IP addressing and routing in implementing scalable and secure Cisco ISR routers connected to LANs and

WANs. The exam certifies the routing knowledge and skills of successful candidates. They are certified in using advanced IP addressing and routing in implementing scalable and highly secure Cisco routers that are connected to LANs, WANs, and IPv6. The exam also covers configuration of secure routing solutions.

PRACTICAL SESSION 9 HANDS-ON PRACTICALS ON ROUTER AND SWITCHES 9 LABS ON CLOUD AVAILABLE FOR PRACTICE FROM HOME

HIGHLIGHTS 9 INDUSTRY EXPERIENCED CERTIFIED INSTRUCTORS 9 LIFE TIME CCNP RACK ACCESS FOR EXTRA PRACTICAL SESSIONS

9 LIFETIME REPEATING OF LECTURES ALLOWED INVESTMENT PROTECTION FROM FUTURE UPGRADES. 9 FEES REFUND IF YOU ARE NOT AN EXPERT

Implementing Cisco IP Switched Networks (SWITCH 642-813) is a qualifying exam for the Cisco Certified Network Professional CCNP®, and Cisco Certified Design Professional . CCDP® certifications. The SWITCH 642-813 exam will certify that the successful candidate has important knowledge and skills necessary to plan, configure and verify the implementation of complex enterprise switching solutions using Cisco’s Campus Enterprise Architecture. The SWITCH exam also covers secure integration of VLANs, WLANs, voice and video into campus networks. Troubleshooting and Maintaining Cisco IP Switched Networks (TSHOOT 642-832) is a qualifying exam for the Cisco Certified Network Professional CCNP® certification. The TSHOOT 642832 exam will certify that the successful candidate has important knowledge and skills necessary to (1) plan and perform regular maintenance on complex enterprise routed and switched networks and (2) use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting.

www.rstforum.net

COURSE HIGHLIGHTS This 21 day per module (Weekdays – 2.5hrs.) OR 10-week per module (Sunday/Saturday) instructor led CCNP course is designed to provide professionals with extensive networking knowledge to accomplish their day to day job and CCNP certifications. The key to a high success rate is based on the program’s objectives as follows:

• Assigned project manager will manage this program. This person will drive the program from its registration stage to monitoring and tracking of the candidates’ performance. • Curriculum is based on course outlines defined by principle company • The Instructor-led certified courses is designed for the candidates with an aim to build theoretical knowledge supplemented by ample hands-on lab exercises • 10 week / module or 21 days / module, of intensive training + labs design. • Courseware includes course kits and other reference material to enable students to prepare for certification exams • Optimal balance of theory classes and practical labs every week to ensure maximum absorption of technology by participants • Customized tests at the end of course to be attempted by every participant • Stringent passing standards with progress report of each participant • Facility of Lab on cloud available.(based on booking) • Repeating of lectures allowed (based on seat availability) • Boot camp includes intensive CCNP-lab workshop to improve time-management & troubleshooting skills • Regular evaluation. • LABs on cloud available for practice from home • Project manager will track Progress and performance of the candidates for CCIE Labs

www.rstforum.net

CCNP R&S COURSE TOPIC . . Following Topics will be covered in CCNP 300-101 Course.

UNDERSTAND NETWORK TECHNOLOGIES AND CONNECTING REMOTE LOCATIONS: • Connectivity Overview • Routing across MPLS VPN • Routing over a GRE Tunnel • Dynamic Multipoint Virtual Private Network • Multipoint GRE • NHRP • IPSEC NETWORK FUNDAMENTALS: • Connectivity Overview • FIB • Asymmetric routing • Describe IP operations • ICMP Unreachable and Redirects • IPv4 and IPv6 fragmentation

• • • • • • • •

TTL Recognize proposed changes to the network Changes to routing protocol parameters Routing protocol migration Explain Frame Relay Operations Point-to-point Multipoint

CONFIGURE AND VERIFY BASIC ROUTING: • • • •

Configure and verify default routing Evaluate routing protocol types Distance vector Link state

www.rstforum.net

• Path vector

• • • • • • • •

Describe administrative distance Troubleshoot passive interfaces Configure and verify filtering with any protocol Configure and verify redistribution between any routing protocols or routing sources Configure and verify manual and auto-summarization with any routing protocol Configure and verify policy-based routing Identify suboptimal routing Explain ROUTE maps

CONFIGURE AND VERIFY LOOP PREVENTION MECHANISMS: • Route tagging and filtering • Split-horizon • Route poisoning IMPLEMENTING RIPNG: • Configuring RIP • Verification and investigation of RIP Database

• Summary IMPLEMENT AN EIGRP BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS: • • • • •

Determine network resources needed for implementing EIGRP in a network Create an EIGRP implementation plan Create an EIGRP verification plan Configure EIGRP routing Verify an EIGRP solution using show and debug commands

• Document the verification results for an EIGRP implementation IMPLEMENT AN EBGP BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS: • Determine network resources needed for implementing eBGP on a network • Create an eBGP implementation plan • Create an eBGP verification plan • Configure eBGP routing • Verify eBGP solution was implemented properly using show and debug commands • Document verification results for an eBGP implementation plan

www.rstforum.net

IMPLEMENT AN IPV6 BASED SOLUTION, GIVEN A NETWORK DESIGN AND REQUIREMENTS: • Determine network resources needed for implementing IPv6 on a network • Create an IPv6 implementation plan

• • • • •

Create an IPv6 verification plan Configure IPv6 routing Configure IPv6 interoperation with IPv4 Verify IPv6 solution was implemented properly using show and debug commands Document verification results for an IPv6 implementation plan

IMPLEMENT AN IPV4 OR IPV6 BASED REDISTRIBUTION SOLUTION: • Create a redistribution implementation plan based upon the results from a redistribution analysis • Create a redistribution verification plan • • • •

Configure a redistribution solution Verify that a redistribution was implemented Document results of a redistribution implementation and verification plan Identify the differences between an IPv4 and IPv6 redistribution solution

IMPLEMENT A MULTI-AREA OSPF NETWORK, GIVEN A NETWORK DESIGN AND REQUIREMENTS:

• • • • • •

Determine network resources needed for implementing OSPF on a network Create an OSPF implementation plan Create an OSPF verification plan Configure OSPF routing Verify OSPF solution was implemented properly using show and debug commands Document the verification results for an OSPF implementation plan

IMPLEMENT LAYER 3 PATH CONTROL SOLUTION: • Create a Layer 3 path control implementation plan based upon the results of the redistribution analysis • Create a Layer 3 path control verification plan • Configure Layer 3 path control • Verify that a Layer 3 path control was implemented • Document results of a Layer 3 path control implementation and verification plan • Implement basic teleworker and branch services • Describe broadband technologies

www.rstforum.net

• Configure basic broadband connections • IP SLA

Following Topics will be covered in CCNP 300-115 Course. IMPLEMENT VLAN BASED SOLUTION, GIVEN A NETWORK DESIGN AND A SET OF REQUIREMENTS: • Determine resources needed for implementing a VLAN based solution on a network • Create a VLAN based implementation plan • Create a VLAN based verification plan • Configure switch-to-switch connectivity for the VLAN based solution • Configure loop prevention for the VLAN based solution • Configure Access Ports for the VLAN based solution • Verify the VLAN based solution using show and debug commands • Document the verification after implementing a VLAN solution CONFIGURE SWITCH ADMINISTRATION : • Configure and verify switch administration • SDM templates • Managing MAC address table • Troubleshoot Err-disable recovery

• • • •

Configure and verify Layer 2 protocols CDP, LLDP UDLD Normal, extended VLAN, voice VLAN

CONFIGURE AND VERIFY TRUNKING: • VTPv1, VTPv2, VTPv3, VTP pruning • Dot1Q • Native VLAN • Manual pruning CONFIGURE AND VERIFY ETHERCHANNELS: • LACP, PAgP, manual • Layer 2, Layer 3 • Load balancing • EtherChannel misconfiguration guard

www.rstforum.net

CONFIGURE AND VERIFY SPANNING TREE:

• • • •

PVST+, RPVST+, MST Switch priority, port priority, path cost, STP timers PortFast, BPDUguard, BPDUfilter Loopguard and Rootguard

CONFIGURE AND VERIFY OTHER LAN SWITCHING TECHNOLOGIES: • SPAN, RSPAN • Describe chassis virtualization and aggregation technologies

• Stackwise INFRASTRUCTURE SECURITY: • Configure and verify switch security features • DHCP snooping • IP Source Guard • Dynamic ARP inspection • Port security • Private VLAN

• Storm control CONFIGURE AND VERIFY VLANS: • Access ports • VLAN database DESCRIBE DEVICE SECURITY USING CISCO IOS AAA WITH TACACS+ AND RADIUS: • AAA with TACACS+ and RADIUS

• Local privilege authorization fallback IMPLEMENT A SECURITY EXTENSION OF A LAYER 2 SOLUTION, GIVEN A NETWORK DESIGN AND A SET OF REQUIREMENTS: • • • • •

Determine network resources needed for implementing a Security solution Create a implementation plan for the Security solution Create a verification plan for the Security solution Configure port security features Configure general switch security features

• Configure private VLANs

www.rstforum.net

• Configure VACL and PACL

• Verify the Security based solution using show and debug commands • Document the verification results after implementing a Security solution IMPLEMENT SWITCH BASED LAYER 3 SERVICES, GIVEN A NETWORK DESIGN AND A SET OF REQUIREMENTS: • Determine network resources needed for implementing a Switch based L3 solution • Create an implementation plan for the Switch based Layer 3 solution • Create a verification plan for the Switch based Layer 3 solution

• • • •

Configure routing interfaces Configure Layer 3 Security Verify the Switch based Layer 3 using show and debug commands Document the verification results after implementing a Switch based Layer 3 solution

IMPLEMENT HIGH AVAILABILITY, GIVEN A NETWORK DESIGN AND A SET OF REQUIREMENTS: • Determine network resources needed for implementing High Availability on a network • Create a High Availability implementation plan • Create a High Availability verification plan

• • • •

Implement first hop redundancy protocols Implement switch supervisor redundancy Verify High Availability solution using show and debug commands Document results of High Availability implementation and verification

HIGH AVAILABILITY NETWORKS: • Configuring NTP • NTP Modes

• Securing NTP • SNTP IMPLEMENTING SNMPV3: • SNMP Overview • SNMP Configurations • SNMP Verification IMPLEMENTING CISCO IOS IP SLA: • IPSLA Introduction

www.rstforum.net

• IPSLA Configuration IMPLEMENTING PORT MIRRORING AND MONITORING SUPPORT:

• SPAN and RSPAN Introduction • Configuration and Verification of SPAN and RSPAN VERIFYING SWITCH VIRTUALIZATION : • Introduction to Cisco StackWise Solution • Verify StackWise • Redundant Switch Supervisor • Supervisor Redundancy Modes • VSS • Verify VSS FIRST HOP REDUNDANCY PROTOCOL IMPLEMENTATION : • Configuring L3 Redundancy with HSRP • FHRP • HSRP Load Sharing • HSRP Tracking • HSRP Authentication

• • • • • • • •

VRRP Configuring VRRP Tracking VRRP VRRP Interface Configuration GLBP Configuring GLBP GLBP Load Balancing HSRP GLBP for IPv6

Following Topics will be covered in CCNP 300-135 Course. MAINTAIN AND MONITOR NETWORK PERFORMANCE: • Develop a plan to monitor and manage a network • Perform network monitoring using IOS tools • Perform routine IOS device maintenance • Isolate sub-optimal internetwork operation at the correctly defined OSI Model layer

www.rstforum.net

NETWORK PRINCIPLES: • Use Cisco IOS troubleshooting tools • Debug, conditional debug

• Ping and trace route with extended options • Apply troubleshooting methodologies • Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause) • Design and implement valid solutions • Verify and monitor resolution LAYER 2 TECHNOLOGIES: • Troubleshoot switch administration • SDM templates • Managing MAC address table • • • • •

Troubleshoot Err-disable recovery Troubleshoot Layer 2 protocols CDP, LLDP UDLD Troubleshoot VLANs

• Access ports

• • • • • • • • • • • • • • • •

VLAN database Normal, extended VLAN, voice VLAN Troubleshoot trunking VTPv1, VTPv2, VTPv3, VTP pruning dot1Q Native VLAN Manual pruning Troubleshoot EtherChannels LACP, PAgP, manual Layer 2, Layer 3 Load balancing therChannel misconfiguration guard Troubleshoot spanning tree PVST+, RPVST +, MST Switch priority, port priority, path cost, STP timers PortFast, BPDUguard, BPDUfilter

www.rstforum.net

• Loopguard, Rootguard • Troubleshoot other LAN switching technologies • SPAN, RSPAN

• Troubleshoot chassis virtualization and aggregation technologies • Stackwise LAYER 3 TECHNOLOGIES: • Troubleshoot IPv4 addressing and subnetting • Address types (Unicast, broadcast, multicast, and VLSM) • ARP • DHCP relay and server • DHCP protocol operations • Troubleshoot IPv6 addressing and subnetting • Unicast • EUI-64 • ND, RS/RA • Autoconfig (SLAAC) • DHCP relay and server • DHCP protocol operations • Troubleshoot static routing

• • • • • • • • • • • • • • • •

Troubleshoot default routing Troubleshoot administrative distance Troubleshoot passive interfaces Troubleshoot VRF lite Troubleshoot filtering with any protocol Troubleshoot between any routing protocols or routing sources Troubleshoot manual and autosummarization with any routing protocol Troubleshoot policy-based routing Troubleshoot suboptimal routing Troubleshoot loop prevention mechanisms Route tagging, filtering Split-horizon Route poisoning Troubleshoot RIPv2 Troubleshoot EIGRP neighbor relationship and authentication Troubleshoot loop free path selection

www.rstforum.net

• RD, FD, FC, successor, feasible successor • Troubleshoot EIGPR operations • Stuck in active

• • • • • • • • • • • • • • • • • • • • • • •

Troubleshoot EIGRP stubs Troubleshoot EIGRP load balancing Equal cost Unequal cost Troubleshoot EIGRP metrics Troubleshoot EIGRP for IPv6 Troubleshoot OSPF neighbor relationship and authentication Troubleshoot network types, area types, and router types Point-to-point, multipoint, broadcast, nonbroadcast LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub Internal router, backbone router, ABR, ASBR Virtual link Troubleshoot OSPF path preference Troubleshoot OSPF operations Troubleshoot OSPF for IPv6 Troubleshoot BGP peer relationships and authentication Peer group Active, passive States and timers Troubleshoot eBGP eBGP 4-byte AS number Private AS

VPN TECHNOLOGIES: • Troubleshoot GRE • • • •

Infrastructure Security Troubleshoot IOS AAA using local database Troubleshoot device access control Lines (VTY, AUX, console)

• Management plane protection • Password encryption • Troubleshoot router security features

www.rstforum.net

• IPv4 access control lists (standard, extended, time-based) • IPv6 traffic filter • Unicast reverse path forwarding INFRASTRUCTURE SERVICES: • Troubleshoot device management • Console and VTY • Telnet, HTTP, HTTPS, SSH, SCP • (T)FTP • Troubleshoot SNMP • v2 • v3 • Troubleshoot logging • Local logging, syslog, debugs, conditional debugs • Timestamps • • • • •

Troubleshoot Network Time Protocol (NTP) NTP master, client, version 3, version 4 NTP authentication Troubleshoot IPv4 and IPv6 DHCP DHCP client, IOS DHCP server, DHCP relay

• • • • • • •

DHCP options (describe) Troubleshoot IPv4 Network Address Translation (NAT) Static NAT, Dynamic NAT, PAT Troubleshoot SLA architecture Troubleshoot tracking objects Tracking objects Tracking different entities (for example, interfaces, IPSLA results)

TROUBLESHOOT MULTI-PROTOCOL SYSTEM NETWORKS: • • • •

Troubleshoot EIGRP Troubleshoot OSPF Troubleshoot eBGP Troubleshoot routing redistribution solution

• Troubleshoot a DHCP client and server solution • Troubleshoot NAT • Troubleshoot first hop redundancy protocols

www.rstforum.net

• Troubleshoot IPv6 routing • Troubleshoot IPv6 and IPv4 interoperability • Troubleshoot switch-to-switch connectivity for the VLAN based solution

• • • • • • • • • • • • • •

Troubleshoot loop prevention for the VLAN based solution Troubleshoot Access Ports for the VLAN based solution Troubleshoot private VLANS Troubleshoot port security Troubleshoot general switch security Troubleshoot VACLs and PACLs Troubleshoot switch virtual interfaces (SVIs) Troubleshoot switch supervisor redundancy Troubleshoot switch support of advanced services (i.e., Wireless, VOIP and Video) Troubleshoot a VoIP support solution Troubleshoot a video support solution Troubleshoot Layer 3 Security Troubleshoot issues related to ACLs used to secure access to Cisco routers Troubleshoot configuration issues related to accessing the AAA server for authentication purposes • Troubleshoot security issues related to IOS services (finger, NTP, HTTP, FTP, RCP)

www.rstforum.net

CCNP LAB TOPICS . . . . . . . . . Following hands-on labs sessions will be provided to CCNP students.

RIPv2 & RIPng: Lab 1. Configuring RIPv2 for IPv4 Task 1: Configure interface IP addresses Task 2: Enable IPv4 routing Task 3: Create RIPv2 process for IPv4 Task 4: Configure network command Task 4: Verify IP protocols and its details Task 5: Verify routing table and RIP route entries Task 6: Analyze outputs of debug command Lab 2. RIPv2 Passive-interface and neighbor Task 1: Configure passive-interface command in RIP Process Task 2: Verify protocols and its details Task 3: Verify using debug command Task 4: Configure neighbor command Task 5: Verify protocols and its details Task 6: Verify routing table and RIP routes Lab 3. RIPv2 Authentication Task 1: Create key chain and assign key Task 2: Select encryption mode Task 3: Enable RIPv2 authentication Task 4: Verification of authentication Task 5: Analysis of debug IP RIP Task 6: Verify routing table Lab 4. RIPv2 Default Network Task 1: Configure default route towards ISP Task 2: Configure RIPv2 Task 3: Configure default information originate command Task 4: Verify default route propagation Task 5: Verify using ping Lab 5. RIPv2 Summarization Task 1: Configure block of 4 networks in sequence Task 2: Verify routes on neighbor router routing table

www.rstforum.net

Task 3: Summarize RIP routes on outgoing interfaces Task 4: Verify receipt of summary route in neighbors routing table Lab 6. Configuring RIPng for IPv6 Task 1: Configure Interface IPv6 address Task 2: Enable IPv6 routing Task 3: Create RIPng Process for IPv6 and provide routing process name Task 4: Enable RIPng on interfaces Task 5: Verify IPv6 protocols and its details Task 6: Verify IPv6 routing table and RIP route entries Task 7: Analyze outputs of debug command Lab 7. IPv6 RIPng Passive-interface: Task 1: Configure passive-interface command in RIPng Process

Task 2: Verify protocols and its details Task 3: Verify using debug command Task 4: Verify IPv6 protocols and its details Task 5: Verify IPv6 routing table and RIP routes Lab 8. IPv6 RIPng Authentication Task 1: Create key chain and assign key Task 2: Select encryption mode Task 3: Enable RIPng authentication Task 4: Verification of authentication Task 5: Analysis of debug command for IPv6 Task 6: Verify IPv6 routing table Lab 9. IPv6 RIPng Default Network Task 1: Configure default route towards ISP Task 2: Configure RIPng Task 3: Configure default information originate command Task 4: Verify default route propagation Task 5: Verify using IPv6 ping Lab 10.IPv6 RIPng Summarization Task 1: Configure IPv6 block of 4 networks in sequence Task 2: Verify routes on neighbor router IPv6 routing table Task 3: Summarize RIP routes on outgoing interfaces Task 4: Verify receipt of summary route in neighbors IPv6 routing table

www.rstforum.net

EIGRP: Lab 11.Configuring EIGRP for IPv4 Task 1: Configure IPv4 EIGRP process for Autonomous Task 2: Configure network command Task 3: Verify IP protocols and its details Task 4: Verify EIGRP updates are sent on relevant interfaces Task 5: Verify EIGRP neighborship Task 6: Verify EIGRP topology table

Task 7: Verify routing table and EIGRP route entries Task 8: Analyze outputs of debug command Lab 12. Configuring EIGRP for IPv4 using named configuration Task 1: Configure IPv4 EIGRP process with a name Task 2: Enable address-family IPv4 for your AS Task 3: Enter topology base mode for manipulation set: Task 4: Configure network command Task 5: Verify IP protocols and its details Task 6: Verify EIGRP updates are sent on relevant interfaces Task 7: Verify EIGRP neighborship Task 8: Verify EIGRP topology table Task 9: Verify routing table and EIGRP route entries Lab 13.EIGRP Passive-interface Task 1: Configure IPv4 EIGRP Process Task 2: Configure to send updates on all interfaces using network 0.0.0.0 command. Task 3: Suppress EIGRP updates using “passive-interface default” command Task 4: Un-suppress EIGRP updates using “no passive-interface” command Task 5: Verify EIGRP neighborship Task 6: Verify routing table and EIGRP routes Lab 14.EIGRP Passive-interface using named configuration Task 1: Configure IPv4 EIGRP Process with a name Task 2: Enable address-family IPv4 for your AS Task 3: Configure to send updates on all interfaces using network 0.0.0.0 command. Task 4: Enter address-family default interface configuration mode (af-interface default) Task 5: Suppress EIGRP updates using “passive-interface” command Task 6: Exit address-family default interface configuration mode

www.rstforum.net

Task 7: Enter address-family interface serial 2/0 mode Task 8: Un-suppress EIGRP updates using “no passive-interface” command Task 9: Verify EIGRP neighborship Lab 15. EIGRP Authentication Task 1: Configure IPv4 EIGRP Process with a name Task 2: Enable address-family IPv4 for your AS Task 3: Create key chain and assign key

Task 4: Select encryption mode Task 5: Enable EIGRP authentication on both neighbors Task 6: Verification of authentication Task 7: Verify EIGRP neighborship Lab 16. EIGRP Authentication using named configuration Task 1: Create key chain and assign key Task 2: Select encryption mode Task 3: Enter IPv4 EIGRP Process with a name Task 4: Enter address-family IPv4 for your AS Task 5: Enter address-family interface mode Task 6: Enable EIGRP authentication on both neighbors Task 7: Verification of authentication Task 8: Verify EIGRP neighborship Lab 17. EIGRP Summarization Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Disable auto-summarization in EIGRP Process Task 3: Verify routes on neighbor router routing table

Task 4: Summarize EIGRP routes on outgoing interfaces Task 5: Verify receipt of summary route in neighbors routing table Task 6: Verify creation of null interface in routing table Task 7: Analyze administrative distance of summary Lab 17. EIGRP Summarization Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Disable auto-summarization in EIGRP Process Task 3: Verify routes on neighbor router routing table

Task 4: Summarize EIGRP routes on outgoing interfaces Task 5: Verify receipt of summary route in neighbors routing table Task 6: Verify creation of null interface in routing table Task 7: Analyze administrative distance of summary

www.rstforum.net

Lab 18. EIGRP Summarization using named configuration Task 1: Enter IPv4 EIGRP Process with a name Task 2: Enter address-family IPv4 for your AS Task 3: Enter address-family interface mode Task 4: Summarize EIGRP routes on outgoing interfaces Task 5: Verify receipt of summary route in neighbors routing table Task 6: Verify creation of null interface in routing table Lab 19. EIGRP redistribution Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Redistribute these connected networks in EIGRP process Task 3: Verify routes on neighbor router routing table Task 4: Analyze administrative distance of redistributed route in neighbor router

Task 5: Analyze network type as “D ex” in neighbor router routing table Lab 20. EIGRP redistribution using named configuration Task 1: Enter IPv4 EIGRP Process with a name Task 2: Enter address-family IPv4 for your AS Task 3: Enter topology base configuration mode Task 4: Redistribute these connected networks in EIGRP process Task 5: Verify routes on neighbor router routing table Task 6: Analyze administrative distance of redistributed route in neighbor router Task 7: Analyze network type as “D ex” in neighbor router routing table Lab 21. EIGRP Stub Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure EIGRP stub with connected option Task 3: Configure EIGRP stub with connected static option Task 4: Configure EIGRP stub with receive only option Task 5: Verify routes on neighbor router routing table Task 6: Configure no auto summary Task 7: Verify routes on neighbor router routing table Lab 22. EIGRP Stub using named configuration Task 1: Enter IPv4 EIGRP Process with a name Task 2: Enter address-family IPv4 for your AS Task 3: Configure EIGRP stub with connected option Task 4: Configure EIGRP stub with connected static option Task 5: Configure EIGRP stub with receive only option Task 6: Verify routes on neighbor router routing table

www.rstforum.net

Task 7: Configure no auto summary Task 8: Verify routes on neighbor router routing table Lab 23. EIGRP Tweaks Task 1: Change K – Values in EIGRP Process using metric weight commands Task 2: Verify neighborship using show ip eigrp neighbor command Task 3: Change Maximum path for load-balancing, default is 4 Task 4: Verify using show ip protocols command Task 5: Change EIGRP maximum hopcount, default is 100 Task 6: Verify using show ip protocols command Lab 24. EIGRP Tweaks using named configuration Task 1: Change K – Values in EIGRP Process using metric weight commands Task 2: Verify neighborship using show ip eigrp neighbor command

Task 3: Change Maximum path for load-balancing, default is 4 Task 4: Verify using show ip protocols command Task 5: Change EIGRP maximum hopcount, default is 100 Task 6: Verify using show ip protocols command Lab 25. Configuring RIPng for IPv6 Task 1: Configure Interface IPv6 address Task 2: Enable IPv6 routing Task 3: Create RIPng Process for IPv6 and provide routing process name

Task 4: Enable RIPng on interfaces Task 5: Verify IPv6 protocols and its details Task 6: Verify IPv6 routing table and RIP route entries Task 7: Analyze outputs of debug command Lab 26. IPv6 RIPng Passive-interface Task 1: Configure passive-interface command in RIPng Process Task 2: Verify protocols and its details Task 3: Verify using debug command Task 4: Verify IPv6 protocols and its details Task 5: Verify IPv6 routing table and RIP routes Lab 27. IPv6 RIPng Authentication Task 1: Create key chain and assign key Task 2: Select encryption mode Task 3: Enable RIPng authentication Task 4: Verification of authentication Task 5: Analysis of debug command for IPv6 Task 6: Verify IPv6 routing table

www.rstforum.net

Lab 28. IPv6 RIPng Default Network Task 1: Configure default route towards ISP Task 2: Configure RIPng Task 3: Configure default information originate command Task 4: Verify default route propagation Task 5: Verify using IPv6 ping Lab 29. IPv6 RIPng Summarization Task 1: Configure IPv6 block of 4 networks in sequence Task 2: Verify routes on neighbor router IPv6 routing table Task 3: Summarize RIP routes on outgoing interfaces Task 4: Verify receipt of summary route in neighbors IPv6 routing table OSPF: Lab 30. Configuring OSPF for IPv4 Task 1: Configure IPv4 OSPF process for Autonomous Task 2: Configure network command Task 3: Verify IP protocols and its details Task 4: Verify OSPF updates are sent on relevant interfaces Task 5: Verify OSPF neighborship Task 6: Verify OSPF topology table Task 7: Verify routing table and OSPF route entries Task 8: Analyze outputs of debug command

Lab 31. OSPF Authentication Task 1: Configure IPv4 OSPF Process with a name Task 2: Enable address-family IPv4 for your AS Task 3: Create key chain and assign key Task 4: Select encryption mode Task 5: Enable OSPF authentication on both neighbors Task 6: Verification of authentication Task 7: Verify OSPF neighborship Lab 32. OSPF Summarization Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Disable auto-summarization in OSPF Process Task 3: Verify routes on neighbor router routing table Task 4: Summarize OSPF routes on outgoing interfaces Task 5: Verify receipt of summary route in neighbors routing table Task 6: Verify creation of null interface in routing table Task 7: Analyze administrative distance of summary Lab 33. OSPF redistribution Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Redistribute these connected networks in OSPF process Task 3: Verify routes on neighbor router routing table

www.rstforum.net

Task 4: Analyze administrative distance of redistributed route in neighbor router Task 5: Analyze network type as “D ex” in neighbor router routing table Lab 34. OSPF Stub Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure OSPF stub with connected option Task 3: Configure OSPF stub with connected static option Task 4: Configure OSPF stub with receive only option Task 5: Verify routes on neighbor router routing table Task 6: Configure no auto summary Task 7: Verify routes on neighbor router routing table Lab 35. OSPF Totally Stubby Area Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure OSPF totally stub area with “stub no-summary” command

Task 3: Verify routes on router routing table Lab 36. OSPF Not So Stubby Area (NSSA) Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure OSPF not so stubby area with “nssa” command Task 3: Verify routes on router routing table Lab 37. OSPF Virtual Link Task 1: Configure IPv4 OSPF Process with Area2 is not connected to backbone area Task 2: Verify routes on router routing table Task 3: Configure IPv4 OSPF virtual link Task 4: Verify virtual link is up Task 5: Verify routes on router routing table Lab 38. Configuring OSPF for IPv6 Task 1: Configure IPv6 OSPF process for Autonomous Task 2: Configure network command Task 3: Verify IPv6 protocols and its details Task 4: Verify IPv6 OSPF updates are sent on relevant interfaces Task 5: Verify IPv6 OSPF neighborship Task 6: Verify IPv6 OSPF topology table Task 7: Verify routing table and IPv6 OSPF route entries Task 8: Analyze outputs of debug command Lab 39. OSPF Authentication for IPv6 Task 1: Configure IPv6 OSPF Process with a name Task 2: Enable address-family IPv6 for your AS Task 3: Create key chain and assign key Task 4: Select encryption mode Task 5: Enable IPv6 OSPF authentication on both neighbors Task 6: Verification of authentication for IPv6 Task 7: Verify IPv6 OSPF neighborship

www.rstforum.net

Lab 40. OSPF Summarization for IPv6 Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Disable auto-summarization in IPvc6 OSPF Process Task 3: Verify IPv6 routes on neighbor router routing table Task 4: Summarize IPv6 OSPF routes on outgoing interfaces Task 5: Verify IPv6 receipt of summary route in neighbors routing table Task 6: Verify IPv6 creation of null interface in routing table Task 7: Analyze IPv6 administrative distance of summary Lab 41. OSPF redistribution for IPv6 Task 1: Configure 4 loopbacks with network addresses in sequence Task 2: Redistribute these connected networks in IPv6 OSPF process Task 3: Verify IPv6 routes on neighbor router routing table Task 4: Analyze administrative distance of redistributed route in neighbor router

Task 5: Analyze network type as “D ex” in neighbor router routing table Lab 42. OSPF Stub for IPv6 Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure IPv6 OSPF stub with connected option Task 3: Configure IPv6 OSPF stub with connected static option Task 4: Configure IPv6 OSPF stub with receive only option Task 5: Verify IPv6 routes on neighbor router routing table Task 6: Configure no auto summary Task 7: Verify IPv6 routes on neighbor router routing table Lab 43. OSPF Totally Stubby Area for IPv6 Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure IPv6 OSPF totally stub area with “stub no-summary” command Task 3: Verify IPv6 routes on router routing table Lab 44. OSPF Not So Stubby Area (NSSA) for IPv6 Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure IPv6 OSPF not so stubby area with “nssa” command Task 3: Verify IPv6 routes on router routing table Lab 45. OSPF Virtual Link for IPv6 Task 1: Configure IPv6 OSPF Process with Area2 is not connected to backbone area Task 2: Verify routes on router routing table Task 3: Configure IPv6 OSPF virtual link Task 4: Verify virtual link is up Task 5: Verify IPv6 routes on router routing table BGP Lab 46. Configuring BGP for IPv4 Task 1: Configure IPv4 BGP process for Autonomous Task 2: Configure neighbor command Task 3: Configure IPv4 OSPF Process Task 4: Enable address-family IPv4 for your AS

www.rstforum.net

Task 5: Announce the network in BGP Process Task 6: Verify routing table and BGP route entries Task 7: Verify BGP neighborship Task 8: Verify routes entries in BGP table Lab 47. Configure BGP AS-PATH Attribute Task 1: Configure loopback and configure in IPv4 OSPF with network command Task 2: Announce loopback in BGP process Task 3: Verify routes entries in BGP table Task 4: Prepend AS for as-path manipulation with route-map policy Task 5: Verification of as-path manipulation in BGP table Lab 48. Configure BGP Local Preference Attribute Task 1: Configure loopback and configure in IPv4 OSPF with network command Task 2: Announce loopback in BGP process Task 3: Verify routes entries in BGP table Task 4: Configure local preference manipulation with route-map policy Task 5: Verification of local preference manipulation in BGP table Lab 49. Configure BGP MED Attribute Task 1: Configure multiple interface to reach single AS Task 2: Configure interfaces in IPv4 OSPF process with network command Task 3: Announce interfaces in BGP Process Task 4: Verify routes entries in BGP table Task 5: Configure selective route manipulation using MED with route-map policy Task 6: Verification of selective route manipulation in BGP table

Lab 50. BGP Summarization Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure summarization with “aggregate-address” command Task 3: Verify receipt of summary route in neighbors BGP table Task 4: Configure summarization with “summary-only” command Task 5: Verify receipt of summary route in neighbors BGP table Task 6: Configure summarization with “as-set” command Task 7: Verify receipt of summary route in neighbors BGP table Lab 51. BGP Summarization with Prefix List Task 1: Summarize with BGP routes in router mode with Pre-fix Address Task 2: Verify receipt of summary route received in neighbor router’s bgp table Lab 52. BGP Community String Task 1: Configure community string attribute with “send-community” command Task 2: Verify community string on neighbor router Task 3: Configure community string manipulation on neighbor router Task 4: Verify routes entries in BGP table Lab 53. BGP Route Reflector Task 1: Configure IPv4 BGP Process for Autonomous Task 2: Configure neighbor command Task 3: Configure IPv4 OSPF Process

www.rstforum.net

Task 4: Announce the network in BGP Process Task 5: Verify routing table and BGP route entries Task 6: Verify BGP neighborship Task 7: Verify routes entries in BGP table Task 8: Configure BGP Route Reflector Task 9: Verify IPv4 BGP routes Lab 54. Configuring BGP for IPv6 Task 1: Configure IPv6 BGP process for Autonomous Task 2: Configure neighbor command Task 3: Enable address-family IPv6 for your AS Task 4: Activate neighbor Task 5: Configure IPv6 OSPF Process Task 6: Enable address-family IPv6 for your AS Task 7: Announce the network in BGP Process Task 8: Verify IPv6 routing table and IPv6 BGP routes entries Task 9: Verify IPv6 BGP neighborship Task 10: Verify routes entries in IPv6 BGP table Lab 55. Configure IPv6 BGP AS-PATH Attribute Task 1: Configure loopback and configure in IPv6 OSPF with network command Task 2:Announce loopback in IPv6 BGP process Task 3: Verify routes entries in IPv6 BGP table Task 4: Prepend AS for as-path manipulation with route-map policy Task 5: Verification of as-path manipulation in IPv6 BGP table Lab 56. Configure BGP Local Preference Attribute Task 1:Configure loopback and configure in IPv6 OSPF with network command Task 2: Announce loopback in IPv6 PBGP process Task 3: Verify routes entries in IPv6 BGP table Task 4: Configure local preference manipulation with route-map policy Task 5: Verification of local preference manipulation in IPv6 BGP table Lab 57. Configure IPv6 BGP MED Attribute Task 1: Configure multiple interface to reach single AS Task 2: Configure interfaces in IPv6 OSPF process with network command Task 3: Announce interfaces in IPv6 BGP Process Task 4: Verify routes entries in IPv6 BGP table Task 5: Configure selective route manipulation using MED with route-map policy Task 6: Verification of selective route manipulation in IPv6 BGP table Lab 58. BGP Summarization for IPv6 Task 1: Configure loopbacks with network addresses in sequence Task 2: Configure summarization with “aggregate-address” command Task 3: Verify receipt of summary route in neighbors IPv6 BGP table Task 4: Configure summarization with “summary-only” command Task 5: Verify receipt of summary route in neighbors IPv6 BGP table Task 6: Configure summarization with “as-set” command Task 7: Verify receipt of summary route in neighbors IPv6 BGP table

www.rstforum.net

Lab 59. BGP Summarization with Prefix List Task 1: Summarize with BGP routes in router mode with Pre-fix Address Task 2: Verify receipt of summary route received in neighbor router’s bgp table Lab 60. Configure IPv6 BGP Community String Attribute

Task 1:Configure community string attribute with “send-community” command Task 2: Verify community string on neighbor router Task 3: Configure community string manipulation on neighbor router Task 4: Verify routes entries in IPv6 BGP table Lab 56. BGP Route Reflector Task 1: Configure IPv6 BGP process for Autonomous Task 2: Configure neighbor command Task 3: Enable address-family IPv6 for your AS Task 4: Activate neighbor Task 5: Configure IPv6 OSPF Process Task 6: Enable address-family IPv6 for your AS Task 7: Announce the network in BGP Process Task 8: Verify IPv6 routing table and IPv6 BGP routes entries Task 9: Verify IPv6 BGP neighborship Task 10: Verify routes entries in IPv6 BGP table Task 11: Configure BGP Route Reflector Task 12: Verify IPv6 BGP routes

www.rstforum.net

VIRTUAL CLASSROOM INSTRUCTOR LED ONLINE TRAINING IS AN IDEAL VEHICLE FOR DELIVERING TRAINING TO INDIVIDUALS ANYWHERE IN THE WORLD AT ANY TIME. THIS INNOVATIVE APPROACH PRESENTS LIVE CONTENT WITH INSTRUCTOR DELIVERING THE TRAINING ONLINE. CANDIDATES WILL BE PERFORMING LABS REMOTELY ON OUR LABS ON CLOUD IN PRESENCE OF AN ONLINE INSTRUCTOR. RSTFORUM USES MICROSOFT LYNC ENGINE TO DELIVER INSTRUCTOR LED ONLINE TRAINING.

ADVANCES IN COMPUTER NETWORK TECHNOLOGY, IMPROVEMENTS IN BANDWIDTH, INTERACTIONS, CHAT AND CONFERENCING, AND REALTIME AUDIO AND VIDEO OFFERS UNPARALLELED TRAINING OPPORTUNITIES. INSTRUCTOR LED ONLINE TRAINING CAN HELPS TODAY’S BUSY PROFESSIONALS TO PERFORM THEIR JOBS AND UPGRADE KNOWLEDGE BY INTEGRATING SELF-PACED INSTRUCTOR LED ONLINE TRAINING IN THEIR DAILY ROUTINES.

LAB EQUIPMENT AT RSTFORUM • Cisco Switch 2950 (Multiple) • Cisco Switch 3550 (Multiple) • Cisco Switch 3560 (Multiple)

• • • • • • • • • • • • • • • • • • • • •

Cisco Switch 3750 (Multiple) Cisco Nexus 5K and 7K Cisco Router 6509 SUP 720 Cisco Router 2800 (Multiple) Cisco Router 2600 (Multiple) Cisco Router 3600 (Multiple) Cisco Router 7206 VXR (Multiple) Cisco Router 7609 SUP 720 Cisco Router 2511 (Multiple) Cisco Router 1750 (Multiple) Cisco MCS Server Call Manager (Multiple) Cisco IP Phone 7900 (Multiple) Cisco ASA/PIX Firewall (Multiple) Cisco IDS/IPS (Multiple) CCIE R&S v5.0 Rack CCIE SP Rack CCIE Security Rack CCIE Voice Rack Servers (Multiple) Relevant cables and modules Terminal Servers

www.rstforum.net

MISCELLANEOUS: •

Minimum batch size required for batch is 10 participants in the CCNP.

• •

The RST Forum reserves the right to cancel/postpone the class. Course schedule will be provided before commencement of the course.

• •

Certificate of participation will be awarded to participants with a minimum 90% attendance All attendees are to observe the Copyright Law on intellectual properties such as software

and courseware from respective vendors • The RST Forum reserves the right to include external participants in the program either for the entire CCNP or individual courses • The RST Forum reserves the right to change/alter the sequence of courses. • RST FORUM published Book would be given at 50% discounted rate to the forum students

GENERAL TERMS & CONDITIONS : • Fees refund if you are not satisfied with training provided. • Fees Refund Policy: • Students with minimum 90% attendance are eligible for fees refund. • Fees Refund will not be provided to students wanting to leave course midway • Students that are not satisfied with the training provided will be advised to repeat the course and RSTForum Will take all possible efforts to make sure that candidate achieves excellence in that subject. • Processing fees of Rs.1500/- and a service tax of 12.36% will be deducted from refund amount. • The RST Forum reserves the right to amend/ modify Fees refund policy.

• Fees Refund claim will not be entertained after last lecture of the enrolled course.

EXAM VOUCHER AND COURSEWARE: • Exam vouchers and cisco courseware will be charged extra at actuals. • Reference materials: Many reference materials are available on returnable basis

www.rstforum.net

TRAINING - CONSULTING - STAFFING – SUPPORT www.rstforum.net Established in 1997, RST Forum is one of the most popular training organizations for professional courses and technology learning. RST Forum founded by infrastructure and communication technology industry professionals to exchange information, share experience, create expertise and establish professional connections. Forum was built on the idea that no expert knows all solutions as does the group of professionals and strongly believes that the best way to learn is by asking others and learning from experience The goal of this forum is to encourage greater co-operation and collaboration amongst group of infrastructure and communications professionals by sharing information, resources, and experiences. To achieve its goal forum conducts technology workshops, technology update sessions, trainings for industry certification, technology advisory meet, professionals meet for emerging technology and innovations discussions, etc. RST Forum's prime collaboration mechanism is providing comprehensive trainings on industry certifications from Cisco, Microsoft, Redhat and others. These trainings are conducted by industry acclaimed, experienced working professionals who have extensive hands-on experience in designing and deploying solutions. These thorough hands-on trainings are provided with an aim to create skilled professional with real understanding of technology and

its application. These certified instructors and CCIE professionals make participants practice on exercises and case studies that reflect real-world situations, so skills developed by these training are immediately useable on the job. Forum’s Lab hosts high end devices and equipment. Lab facilities are also available on cloud for our students to practice at their ease. This substantiates forum’s belief that "all taught in class should be proved, demonstrated and practiced by all participants."

CONTACT Mumbai: 401, Telang Road, above Nalli showroom, Matunga East (C.R.), Mumbai-400019. Tel: (022) 24034949; (022) 24105262; (022) 65653338; (022) 65653339; (91) 9167224466; (91) 9819059899; (91) 9820611290. Pune: 36A, Shrinath Plaza, Dyneshwar Paduka Chowk, Fergusson College Road, Shivajinagar, Pune 411005. Tel: (020) 4120 0959.

www.rstforum.net