Catia Lab Manual

October 7, 2018 | Author: Rameez Farouk | Category: Icon (Computing), Computer Aided Design, 3 D Modeling, Technology, Computing
Share Embed Donate


Short Description

This manual consists of drawing and the procedure for drawing it using Catia tool....

Description

ANNA UNIVERSITY OF TECHNOLOGY TIRUNELVELI TIRUNELVELI-627 007

CAD LABORATORY RECORD NOTE BOOK

NAME

:………………………………………………..

REG NO

:………………………………………………..

SEMESTER

:………………………………………………..

DEGREE

:………………………………………………...

SUBJECT

:…………………………………………………

DEPARTMENT

: …………………………………………………

ANNA UNIVERSITY OF TECHNOLOGY TIRUNELVELI TIRUNELVELI - 627 007

BONAFIDE CERTIFICATE Name

:

Programme

:

Roll No

:

Subject

:

Department

:

Branch

:

Semester

:

REGISTER NO

:

Certified to the bonafide record of practical work done by Mr/Ms…………………………………………………………………………… in the …………………………………………..laboratory during the period ……………………………….. 2010 - 2011. DATE:

Signature of faculty-in-charge

signature of H O D

Submitted for the practical examination held on …………………………...

Internal Examiner

External Examiner

INDEX S.NO

DATE

EX.NO

1

DESCRPTION

PAGE NO

Introduction

1

2

EX.NO.01

Isometric view-1

12

3

EX.NO.02

Isometric view-2

16

4

EX.NO.03

Isometric view-3

20

5

EX.NO.04

Isometric view-4

24

6

EX.NO.05

Isometric view-5

28

7

EX.NO.06

Isometric view-6

32

8

EX.NO.07

Isometric view-7

36

9

EX.NO.08

Isometric view-8

40

10

EX.NO.09

Isometric view-9

44

11

EX.NO.10

Isometric view-10

48

12

EX.NO.11

Assembly Of Sleeve and Cotter joint

52

13

EX.NO.12

Assembly Of Gib and Cotter joint

56

14

EX.NO.13

Assembly Of Knuckle joint

60

15

EX.NO.14

Assembly Of Flanged Coupling

64

16

EX.NO.15

Assembly Of Universal Coupling

68

17

EX.NO.16

Assembly Of Plummer Block

72

18

EX.NO.17

Assembly Of Simple Ecentric

76

19

EX.NO.18

Assembly Of Screw Jack

80

20

EX.NO.19

Assembly Of Stuffing Box

84

21

EX.NO.20

Assembly Of Bushed Bearing

88

SIGNATURE

INTRODUCTION In cad laboratory we are going to study about how to create a model of engineering objects and also how to create an assembly of modeled objects. The modeling softwares like catia, pro e, unigraphics are generally used in mechanical engineering field for the modeling. In this lab catia-v5r18 software is used to do the exercises. CATIA (Computer Aided Three-dimensional Interactive Application) is a multi-platform CAD/CAM/CAE. It is written in the C++ programming language. Commonly referred to as a 3D Product Lifecycle Management software suite, CATIA supports multiple stages of product development (CAx), from conceptualization, design (CAD), manufacturing (CAM), and engineering (CAE).CATIA can be customized via application programming interfaces (API). V4 can be adapted in the Fortran and C Programming languages under an API called CAA (Component Application Architecture). V5 can be adapted via the Visual Basic and C++ programming languages, an API called CAA2 or CAA V5 that is a component object model (COM)-like interface. Although later versions of CATIA V4 implemented NURBS, V4 principally used piecewise polynomial surfaces. 1.1 AN OVERVIEW OF CATIA DESIGN SOFTWARE 1.1.1 Optimal Sharing. Catia V6 users will get access to a unique, collaborative 3 dimensional environment that can be access by an unlimited number of people online. This allows people from across the globe to collaborate in a virtual environment. It has been designed to not only allow for online cooperation, but also makes offline sharing and designing easy to integrate as well. 1.1.2. Simplified Product Development. Creating a new product can be a long and complex process. It encompasses multiple design phases including the initial design, overall development, and manufacturing. Catia V6 decreases the complexity and length of the entire project because it integrates various stages of the development process so that they can be controlled and modified on a single platform. It does this by using an approach to systems engineering known as RFLP. This allows you to create several versions of the same product using different sets of requirements. This gives you a comprehensive look at what the final product could be. 1

1.1.3. Seamless Transitioning. Every version of the Catia design software is designed to allow for seamless integration with previous versions. This makes upgrading a simple process and can be completed without losing any of the information that has already been stored. Catia design software has found its way into more and more industries with each passing year. Traditionally, it gained notoriety through 3 main industries; however every industry that is involved in engineering has found it useful. Catia has become a leader in product development software and may be exactly what is needed to overcome the shortcomings of CAD software. 1.2 Tool Bars Many standard toolbars are used in the different modes like sketcher mode operational mode etc, In catia software. Here we discuss about the tool bars used in sketcher with some examples. 1.2.1 Sketcher Work Bench Tool Bars There are three standard tool bars found in the Sketcher Work Bench. The three tool bars are shown below. The individual tools found in each of the three tools are labeled to the right of the tool icon. Some tools have an arrow located at the bottom right of the tool icon. The arrow is an indication that there is more than one variation of that particular type of tool. The tools that have more than one option that are listed to the right of the default tool. To display the other tool options you must select and hold the left mouse button on the arrow as shown in Figure1.1. This will bring up the optional tools Select arrow Optional tools.

Fig 1.1 2

THE OPERATION TOOL BAR

THE PROFILE TOOL BAR

Fig 1.2

THE CONSTRAINTS TOOL BAR

Fig 1.3 3

Fig 1.4

1.3 Specify A Working Plane

The next step is to create a 2 dimensional profile of the part. The Sketcher Work Bench is a two dimensional (planar) work area. To use the Sketcher Work Bench, you must specify which plane the profile is to be created on. Specifying, the plane can be done several different ways.

ZX plane

Fig 1.5 4

1.4 MODIFYING THE PROFILE USING CHAMFER

The Chamfer icon is also located in the Operations tool bar. This procedure assumes you know what a chamfer is. The steps required to create a chamfer are almost identical to creating a corner. Select the Chamfer icon. The command prompt at the bottom left hand of the screen , will prompt you with the following: “Select the first curve, or a common point”. For this exercise select line 5. The next command prompt will ask you to “Select the second curve”.

Fig 1.6 1.5 Constraint This tool allows you to create individual constraints, one at time. You have already applied a constraint and may not even know it. The Anchor icon is a constraint. The values attached to the Chamfer and Corner are constraints. To apply Dimensional Constraints complete the following steps: 1. Select the Constraint icon. 2. Select the line and/or Sketcher element to be constrained. 3. The Sketcher element will turn green (constraint symbol) along with the appropriate dimension and box with the value in it .To re-locate the constraint value, select the value box and drag the mouse to the desired location.

5

4. If the initial location of the constraint is not satisfactory re-select the dimension and drag and drop it at the new location. 5. To edit the value of the constraint double click on the value box. This will bring up the Constraint Definition pop up window shown in. This window shows the existing value forthe Sketcher element. This value can be edited by typing the newvalue over the existing value. Then select OK or hit the Enter key. The entities linked to the constraint will automatically be updated to the new value.

6. If the constraint is between two different entities, such as lines, select the first line and then the second line.CATIA V5 will constrain the distance between the two entities. The constraint value will appear near the constraint. To move the constraint value. For this lesson constrain your “L Shaped Extrusion” similar to the one shown in Figure

Fig 1.7

1.6 Practice Exercises: Now that your CATIA V5 tool box has some tools in it, put them to use on the following practice exercises. The shapes are simple and can be completed in one sketch. The dimensions represent the constraints you are to use in the Sketcher Work Bench. The first practice exercise has the suggested steps to completing the task along with some helpful hints.

6

Each subsequent practice exercise contains less suggested steps and helpful hints. By the last practice exercise you will be on your own. Using the Sketcher Work Bench and create the following profile and extrude to the dimensions shown below. When completed save as CAT Part”.

Fig 1.8 Suggested Steps: 1. Select the XY plane (the plane the profile will be sketched on).Reference Step 3 for information on selecting planes. 2. Enter the Sketcher Work Bench. Reference Step 4. 3. Sketch the profile of the part. Hint: use the Profile tool. 4. Anchor the lower left hand corner of the sketch. For anchoring a profile. 5. Constrain the profile to match the dimensions shown above. Reference Step 18 for constraining a profile. 6. Exit the Sketcher Work Bench, return to the Part Design Work Bench (the 3D environment). Reference Step 21 for exciting the Sketcher Work Bench and entering the Part Design Work Bench. 7. Once in the Part Design Work Bench extrude the profile to the dimension shown (2”). Reference Step 22 for extruding a profile. 8. Save the part as told in “Reference Step23for saving a file. 7

This part (profile) should be straightforward. This would be a good exerciseto try different methods of constraining and testing the results. Save the shape as mensioned. Exercise 2.CAT Part”.

Fig 1.9 To help make it easier to sketch this part set the grid Primary Spacing to 1and the Graduations to 4. This will put the grid lines in the Sketcher screen to a .25 inch spacing. With that spacing all you have to do is snap to the intersections of the grid to sketch the part.

This practice exercise is a little bit more challenging, lets see what you can down with it. Save this CAT Part as Exercise 3.CATPart”.

Fig 1.10

8

It is not as complicated as it looks. If your grid Graduations is set to 10 just snap to the intersections for the beginning and ending points of your lines. To set the constraint for the angles select the angled lines and the angle constraint will appear. Reference Step 19 for modifying the angle value. If the profile gets over constrained delete the Parallel constraint. Save the file as “ Exercise 3.CATPart”. This practice exercise should challenge you. For this part use radius values, not angles. Save this CAT Part as “Exercise 4.CATPart”.

Fig 1.11

This part can be done using the radius option in the profile command. Before starting, set the grid Primary Spacing to 1 and the Graduations to 4.

SKETCHING WITH THE PROFILE ICON (RADIUS OPTION) 1. Starting at the bottom left corner of the part. 2. Select the Profile icon from the right menu bar. 3. Sketch the vertical 1.50 inch line that defines the left edge of the part.

9

4. Now sketch the first arc along the top of the part. To do this hold down the left mouse button and drag it in the direction you want the arc to go then release the mouse button. The arc will appear and allow you to drag and place it where you want. Place it on the grid intersection 2 inches above the bottom of the part and a half-inch to the right. This will only create half of the arc needed, so the process will have to be repeated to sketch the other half of the arc. 5. Finish sketching the rest of the part. When you reach the inside .25 radius, 6. When the sketch is done constrain it to double check that all the dimensions match the part shown above. Make the necessary changes if needed.

This will give you more practice using the line and corner icons. Save this CAT Part as Exercise 5.CAT Part”

Fig 1.12

Use the Line or Profile icon first to sketch the profile using sharp corners (no radius). Once it is constrained to the dimensions above, go back and add in the radiuses using the Corner icon. *******

10

11

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 1

EX.NO 1 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing etc.,

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

12

13

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT: Thus t he given 3D model as pe r t he dr awing is modelled us ing CATIA V5.18 software.

14

15

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 2

EX.NO 2 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

16

17

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

18

19

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 3

EX.NO 3 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

20

21

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

22

23

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW -4

EX.NO 4 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

24

25

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

26

27

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 5

EX.NO 5 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

28

29

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

30

31

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 6

EX.NO 6 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing, chamber

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed

8.

Select the define edges to be chamfered and the final model is created.

32

33

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

34

35

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 7

EX.NO 7 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

36

37

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

38

39

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 8

EX.NO 8 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

40

41

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

42

43

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW - 9

EX.NO 9 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

44

45

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

46

47

NAME : REG.NO : CLASS : M.E CAD I YEAR

ISOMETRIC VIEW -10

EX.NO 10 DATE:

AIM: Preparation of 3D model using CATIA V5.18 software

TOOLS USED: Pad, Pocketing

PROCEDURE: 1.

Click the Sketcher icon to start the Sketcher workbench.

2.

Select XY, YZ, ZX plane to define the sketch plane, now the Sketcher workbench is displayed, it contains the tools needed for sketching any profile.

3.

Select the profile and draw the part which is given in the model.

4.

Using Constraint command the dimensions are modified as per the given model.

5.

Exit the Sketcher workbench, click Pad and give the thickness for the part.

6.

Select the face to define the work plane and draw the second element.

7.

Using Pocket command material is removed and the final model is created.

48

49

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D model as per the drawing is modelled using CATIA V5.18 software.

50

51

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF SLEEVE AND COTTER JOINT

EX.NO 11 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were the required part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then the parts are assembled in the following order Sleeve, Rod, Cotter by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

52

53

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT: Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

54

55

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF GIB AND COTTER JOINT

EX.NO 12 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then the parts are assembled in the following order Fork, Block, Gib, Cotter by adopting above methods

6.

Select t he u pdate icon for a ssembly t o b e upd ated, all a ssembly de sign m odels a re ensured that it is in constraints condition before the models are finished.

56

57

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT: Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

58

59

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF KNUCKLE JOINT

EX.NO 13 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then t he pa rts a re a ssembled i n t he f ollowing or der Fork end, Eye end. Pin, Collar, Taper pin by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

60

61

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT: Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

62

63

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF FLANGED COUPLING

EX.NO 14 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then t he p arts are a ssembled i n the f ollowing or der Flange(Male), Flange(Female), Shaft, Key by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

64

65

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

66

67

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF UNIVERSAL COUPLING

EX.NO 15 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then the parts are assembled in the following order Flange, Centre block, collar, Taper pin by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly design m odels a re ensured that it is in constraints condition before the models are finished.

68

69

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT: Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

70

71

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF PLUMMER BLOCK

EX.NO 16 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then the pa rts ar e a ssembled in the following or der Body, Brass, Cap, Bolt & Nuts, Lock Nuts by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

72

73

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

CATIA V5.18 software.

Thus the given 3D assembly model as per the drawing is modelled using

74

75

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF SIMPLE ECENTRIC

EX.NO 17 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then the parts are assembled in the following order Straps, Sheave, Shim, Headed bolt, Nuts, Lock Nuts by adopting above methods

6.

Select t he update icon for a ssembly t o b e upd ated, all a ssembly de sign m odels a re ensured that it is in constraints condition before the models are finished.

76

77

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

78

79

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF SCREW JACK

EX.NO 18 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then t he pa rts a re a ssembled i n t he f ollowing or der Body, Screw spindle, Nuts, Cup, Tommy bar, Sunk screw, washer by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

80

81

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT:

Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

82

83

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF STUFFING BOX

EX.NO 19 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then the parts are assembled in the following order Body, Neck bush, gland bush, gland Shaft by adopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

84

85

NAME : REG.NO : CLASS : M.E CAD I YEAR

RESULT: Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

86

87

NAME : REG.NO : CLASS : M.E CAD I YEAR

ASSEMBLY OF BUSHED BEARING

EX.NO 20 DATE:

AIM: Preparation of 3D Assembly model using CATIA V5.18 software

TOOLS USED: Existing Component icon, Smart move, Constraining etc., PROCEDURE: 1.

Assembly Design command is activated to launch the required workbench.

2.

The commands for assembling parts are available in the toolbar on the right side of the application window.

3.

Click the Existing Component icon in the Product Structure toolbar, then the File Selection dialog box is displayed were required the part model is selected.

4.

To constrain a model for positioning parts correctly is carried using the various constraints tools like Constraining and Manipulating and Select the fix component icon, to Fix a part in the space.

5.

Then t he pa rts are a ssembled i n the f ollowing or der Body, Bush, Shaft by a dopting above methods

6.

Select t he u pdate icon for assem bly to be upd ated, all ass embly de sign models ar e ensured that it is in constraints condition before the models are finished.

88

89

RESULT:

Thus the given 3D assembly model as per the drawing is modelled using CATIA V5.18 software.

90

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF