Cat hose and fitting guide
January 20, 2017 | Author: gre294 | Category: N/A
Short Description
Download Cat hose and fitting guide...
Description
Hose Products and Tooling Guide 6th Edition
CAT, CATERPILLAR, their respective logos, and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Caterpillar. The difference counts.™ PECP5030-05
© 2006 Caterpillar
Printed in USA
All Rights Reserved
Introduction ®
Cat Hose Products . . . Designed to Meet User Needs In just about every application, all around the world, Caterpillar ® hose and couplings are setting the standard for performance and reliability. Caterpillar has been developing and delivering the highest quality hose products for more than three decades. We’ve always been committed to excellence, and that commitment is evident in the way we design, manufacture, test and support our hose products. Whether you own Cat equipment or another brand, you need to keep it operating at peak performance and at the lowest possible cost. Cat’s broad line of high pressure, low and medium pressure, and special application hoses and couplings – and our dedicated support – help you do that.
Superior performance – Cat XT™ ES Hoses, for example, feature an exclusive cover formulated and manufactured by Caterpillar to provide up to 20 times more abrasion resistance than other standard rubber covered hoses. These hoses also work at half the SAE bend radius, allowing tighter routing in a wide variety of applications.
Introduction
Superior reliability – Cat hose products undergo testing that far exceeds industry requirements. For example, when industry hoses have completed the required 500,000 cycles of impulse testing for an SAE 100R12 standard, our XT-3™ ES Hose must go another 500,000 cycles to meet the Caterpillar standard. This and our other rigorous testing means you can count on Cat hose products to provide long, reliable performance even in the most extreme operating conditions.
Lower cost per hour – Cat’s exclusive XT Hose Reusable Couplings feature a unique two-piece design that prevents you from purchasing new couplings every time you replace a worn hose. These couplings save you an average of 30% off the cost of assemblies with permanent couplings.
Convenience – We offer a broad selection of couplings to meet customer needs for virtually all brands of mobile equipment – plus many industrial applications.
Introduction
Cat Hose Support . . . Your One Safe Source Just as all hose products are not designed and manufactured equally, all replacement hoses are not assembled equally. We’re committed to building hoses right, clean and fast!
Built right – Tooling can make all the difference in the world when it comes to crimp accuracy. Computerized hose assembly machines designed by Caterpillar take the guesswork out of crimp measurements, helping ensure Cat hose customers get the full life from replacement assemblies.
Built clean – The assembly process can leave many contaminant particles inside a hose. We use state-of-the-art tooling to remove contaminants faster and more effectively than traditional cleaning methods. We also cap and plug the hose ends to help keep assemblies clean prior to installation.
Built fast – Whether you call ahead or take advantage of our while-you-wait service, you can count on our skilled technicians to keep your downtime to a minimum.
All this is backed by Cat’s worldwide dealer network and a parts system that’s second to none! See your Caterpillar Dealer for details on how we can help you manage and service your hose and coupling needs – including setting you up to build hoses yourself. You can also visit our website at www.cat.com.
Table of Contents Section
Page
Hose Identification.......................................................................................................................................................3 Coupling Identification.............................................................................................................................................. 19 Caterpillar High Pressure Hose Products............................................................................................................... 25 XT-6™ ES Hose (2836/4136) and Couplings.......................................................................................................... 29 XT-5™ ES Hose (1036/4199) and Couplings.......................................................................................................... 43 XT-3™ ES Hose (736/4135) and Couplings............................................................................................................ 57 DIN Four-Wire Spiral Hose (1956) and Couplings................................................................................................... 89 Caterpillar Low and Medium Pressure Hose Products........................................................................................ 101 Hydraulic and Suction Hose (716, 294, 844) and Couplings................................................................................. 103 Caterpillar Special Application Hose Products.................................................................................................... 131 Thermoplastic Hose (1028) and Couplings............................................................................................................ 133 Reduced O.D. Thermoplastic Hose (2760) and Couplings.................................................................................... 141 Engine & Air Brake Hose (556, 1130) and Couplings............................................................................................ 151 Air Conditioning Hose (1543J) and Couplings....................................................................................................... 159 Specialty Hose....................................................................................................................................................... 167 Adapters................................................................................................................................................................... 171 NPTF Adapters...................................................................................................................................................... 172 JIC Adapters.......................................................................................................................................................... 182 ORFS Adapters...................................................................................................................................................... 204 Metric Adapters...................................................................................................................................................... 231 NPSM Adapters..................................................................................................................................................... 242 Miscellaneous Adapters......................................................................................................................................... 248 Swivel and Bulkhead Nuts..................................................................................................................................... 254 Caps / Plugs............................................................................................................................................................. 257 Protective Caps and Plugs..................................................................................................................................... 258 Metal Caps and Plugs............................................................................................................................................ 262 Seals......................................................................................................................................................................... 267 Seal Application Charts.......................................................................................................................................... 268 Seals...................................................................................................................................................................... 269 Seal Kits................................................................................................................................................................. 273 Flanges / Hardware.................................................................................................................................................. 277 Split Flanges and Hardware................................................................................................................................... 278 Pre-Install Flanges................................................................................................................................................. 283 Hose Accessories.................................................................................................................................................... 285 Hose Clamps, Clips and Screw Types................................................................................................................... 286 Armor Guard.......................................................................................................................................................... 288 Tooling...................................................................................................................................................................... 291 Reference Material................................................................................................................................................... 366 Part Number Index................................................................................................................................................... 369
2006-02-28 16:22:25.0
1
2
2006-02-28 16:22:25.0
Hose Identification
Hose Identification
Hose, Coupling & Hose Assembly Procedure Checklist........................................................ 4 Flow Capacity Nomograph..................................................................................................... 6 Hose Industry Standard Comparison (SAE / DIN / JIS)......................................................... 7 Hose Working Pressure....................................................................................................... 16 Hose Fluid Compatibility...................................................................................................... 17
3
Hose, Coupling & Hose Assembly Procedure Checklist Step 1 - Identify Hose Assembly to be Made
Hose Identification
(1) Measure the total hose assembly length (sealing surface to sealing surface) and record. Angle of Orientation and/or Bent Stem Hose Assembly
Straight Hose Assembly OVERALL ASSEMBLY LENGTH MINUS ASSEMBLED LENGTH OF ADAPTER AND CUT-OFF FACTORS EQUALS LENGTH OF BULK HOSE REQUIRED
OVERALL ASSEMBLY LENGTH MINUS CUT-OFF FACTORS EQUALS LENGTH OF BULK HOSE REQUIRED
(2) If applicable, measure angle of orientation and record. • The angle between the center lines of two bent couplings measured in a clockwise direction from the back coupling to the front coupling.
Angle of Orientation
Step 2 - Identify Coupling Style & Type Refer to Coupling Identification Tables (1) Look for markings/part numbers to cross reference. (2) Compare the physical characteristics of coupling head to the illustrations in the Coupling Identification Tables and determine coupling possibilities. (3) Measure the coupling’s dimensions in the Coupling Identification Tables to determine coupling head type. Coupling Dimensions (A) Head Diameter & Thickness or Thread Diameter & Pitch (B) Stem Assembly Length (C) Cut-Off Factor (D) Drop Length (E) Degree of Angle (F) Hose Inside Diameter
C E F D + A
B
(4) Use the part number charts in the product sections to select the Cat coupling that closely matches the measured coupling dimensions.
4
Hose, Coupling & Hose Assembly Procedure Checklist Step 3 - Identify What Kind of Hose is to be Replaced Refer to Hose Selection, Industry Comparison, Working Pressure and Fluid Compatibility
✓ ✓ ✓ ✓ ✓
Size: Hose Inside Diameter Temperature Range Application: Machine Type, Machine Origin and Field Work Material being Conveyed: Fluid Type and Flow Pressure: Machine Max Working Pressure
(3) Cut old hose to determine construction layers and type.
Hose Identification
(1) Look at the layline, if legible, for hose type information and/or part number. Hose inner tube (2) Investigate hose application requirements: ID = 1/2" = 8/16"
Inside Diameter Measurement
(4) Measure hose inside diameter. (5) Compare construction layers to Cat Hose Construction Data Sections, and select Cat hose.
Step 4 - Build Hose Assembly Refer to Hose Assembly & Coupling Recovery: Training Video - PEVN3808 (1) Determine the coupling cut-off factor. (2) Determine the length of bulk hose required by subtracting the combined cut-off factor from the overall assembly length. Total Assembly Length - Coupling 1 Cut-off Factor - Coupling 2 Cut-off Factor Hose Cut Length
(3) Cut the hose to the appropriate length. (4) Skive the cover of the hose, if required. (5) Using the Cat Hose Cleaner Group, select appropriate projectile and clean hose once at each end. (6) If permanent couplings, select the correct dies from the Die Selection Chart. (7) Make sure the die group is lubricated. (8) Crimp the couplings. If reusable coupling, reassemble after proper reclamation process. ✓ Measure Permanent Couplings Crimp Diameter with Caliper Measurement Tool (Consult the crimp diameter chart NEEG2746) ✓ Check the Length of the Assembly ✓ Check the Angle of Orientation
(9) Clean the hose assembly with the proper projectile from the Hose Cleaner Group. (10) Tag the hose assembly with an identification tag using the appropriate part number. (11) Cap and/or plug the couplings.
5
Flow Capacity Nomograph
Hose Identification
Flow Capacities of Caterpillar Hose at Recommended Flow Velocities The chart below is designed and provided as an aid in the determination of the correct hose size. 1. determine flow and velocity of system; 2. find them on indexes below; 3. connect line with straight edge to determine correct hose size. AREA (IN2) =
FLOW (GPM) X .3208 VELOCITY (FT/SEC)
6
Recommended Maximum Velocity for Pressure Lines
Velocity, Feet Per Second
Inside Diameter of Hose, Inches
Flow, Gallons per Minute (gpm)
Recommended Maximum Velocity for Suction Lines
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE 100R15 vs XT-6™ ES Hose (2836) WORKING PRESSURE*
IMPULSE TESTING MAX. WORK. PRESS (kPa) 100R15 XT-6 ES
-3
0.188
4.8
—
—
—
—
—
—
-4 -5
0.250 0.313
6.4 7.9
— —
— —
— —
— —
— —
— —
-6
0.375
9.5
6000
6000
414
414
42,000 42,000
-8 -10
0.500 0.625
12.7 15.9
6000 —
6000 6000
414 —
414 414
42,000 42,000 — 42,000
-12 -16 -20 -24 -32
0.750 1.000 1.250 1.500 2.000
19.1 25.4 31.8 38.1 50.8
6000 6000 6000 6000 —
6000 6000 6000 6000 6000
414 414 414 414 414
414 414 414 414 —
42,000 42,000 42,000 42,000 —
42,000 42,000 42,000 42,000 42,000
TEST PRESSURE
TEST TEMPERATURE
NUMBER OF CYCLES
Hose Identification
HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) SIZE (in) (mm) 100R15 XT-6 ES 100R15 XT-6 ES
100R15
All Sizes 120% of W.P. +250°F (+121°C) 500,000 XT-6 ES
All Sizes 120% of W.P. +250°F (+121°C) 1,000,000 TEMPERATURE CAPABILITIES 100R15: XT-6 ES:
-40°F to +250°F (-40°C to +121°C) -40°F to +250°F (-40°C to +121°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar hose and SAE Standard hose. #For this test, XT-6 ES hose is aged at +250°F (+121°C) for 150 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks. W.P. = Working Pressure.
SAE 100R13 vs XT-5™ ES Hose (1036) WORKING PRESSURE*
IMPULSE TESTING
HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) (kPa) SIZE (in) (mm) 100R13 XT-5 ES 100R13 XT-5 ES 100R13 XT-5 ES
-3 -4 -5 -6
0.188 0.250 0.313 0.375
4.8 6.4 7.9 9.5
— — — —
— — — —
— — — —
— — — —
— — — —
— — — —
-8 -10 -12
0.500 0.625 0.750
12.7 15.9 19.1
— — 5000
— — 5000
— — 345
— — 345
— — 35,000
— — 35,000
-16 -20 -24
1.000 1.250 1.500
25.4 31.8 38.1
5000 5000 5000
5000 5000 5000
345 345 345
345 345 345
35,000 35,000 35,000
35,000 35,000 35,000
-32
2.000
50.8
—
5000
—
345
—
35,000
TEST PRESSURE
TEST TEMPERATURE
NUMBER OF CYCLES
100R13
All Sizes 120% of W.P.
+250°F (+121°C) 500,000
XT-5 ES
All Sizes 120% of W.P.
+250°F (+121°C) 1,000,000
TEMPERATURE CAPABILITIES 100R13: XT-5 ES:
-40°F to +250°F (-40°C to +121°C) -40°F to +250°F (-40°C to +121°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, XT-5 ES hose is aged at +250°F (+121°C) for 150 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks. W.P. = Working Pressure
7
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE 100R12 vs XT-3™ ES Hose (736)
Hose Identification
WORKING PRESSURE*
IMPULSE TESTING
HOSE INNER INNER MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) SIZE (in) (mm) 100R12 XT-3 ES
MAX. WORK. PRESS. (BAR) 100R12 XT-3 ES
MAX. WORK. PRESS. (kPa) 100R12 XT-3 ES
TEST PRESSURE
TEST TEMPERATURE
NUMBER OF CYCLES
100R12
-3
0.188
4.8
—
—
—
—
—
—
-4
0.250
6.4
—
—
—
—
—
—
-5 -6
0.313 0.375
7.9 9.5
— 4000
— 4000
— 280
— 280
— 28,000
— 28,000
All Sizes 133% of W.P.
All Sizes 133% of W.P.
+250°F (+121°C) 500,000
XT-3 ES
+250°F (+121°C) 1,000,000
-8
0.500
12.7
4000
4000
280
280
28,000
28,000
TEMPERATURE CAPABILITIES
-10 -12
0.625 0.750
15.9 19.1
— 4000
4000 4000
— 280
280 280
— 28,000
28,000 28,000
100R12: XT-3 ES:
-16 -20 -24 -32
1.000 1.250 1.500 2.000
25.4 31.8 38.1 50.8
4000 3000 2500 2500
4000 3000 2500 2500
280 210 175 175
280 210 175 175
28,000 21,000 17,500 17,500
28,000 21,000 17,500 17,500
-40°F to +250°F (-40°C to +121°C) -40°F to +250°F (-40°C to +121°C)
BEND RADIUS SAE 1/2 SAE
100R12: XT-3 ES:
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, XT-3 ES hose is aged at +250°F (+121°C) for 150 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks. W.P. = Working Pressure
DIN 20023 4SP vs Cat DIN Four-Wire Spiral Hose (1956) WORKING PRESSURE* HOSE INNER INNER DASH DIAMETER DIAMETER SIZE (in) (mm)
IMPULSE TESTING MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. (psi) (BAR) (kPa) 20023 4SP 1956 20023 4SP 1956 20023 4SP 1956
-3 -4 -5 -6 -8 -10 -12 -16 -20
0.188 0.250 0.313 0.375 0.500 0.625 0.750 1.000 1.250
4.8 6.4 7.9 9.5 12.7 15.9 19.1 25.4 31.8
— — — 6453 6018 5075 5075 4060 3045
— — — 6453 6018 5075 5075 4060 3045
— — — 445 415 350 350 280 210
— — — 445 415 350 350 280 210
— — — 44,500 41,500 35,000 35,000 28,000 21,000
-24 -32
1.500 2.000
38.1 50.8
2683 2393
2683 2393
185 165
185 165
18,500 18,500 16,500 16,500
*Minimum burst pressure will always be 4X the maximum working pressure for Caterpillar hose. W.P. = Working Pressure
8
— — — 44,500 41,500 35,000 35,000 28,000 21,000
TEST PRESSURE DIN 20023 4SP
All Sizes 133% of W.P. 1956 All Sizes 133% of W.P.
NUMBER TEST OF TEMPERATURE CYCLES
+212°F (+100°C) 400,000 +212°F (+100°C) 400,000
TEMPERATURE CAPABILITIES DIN 20023 4SP: -40°F to +212°F (-40°C to +100°C)
1956:
-40°F to +212°F (-40°C to +100°C)
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE 100R1AT vs Cat One-Wire Braid Hose (716) IMPULSE TESTING
WORKING PRESSURE*
-3
TEST PRESSURE
3000 2750
— 2750
207 190
— 190
20,700 19,000
— 19,000
100R1
2500 2250 2000
— 2250 2000
172 155 138
— 155 138
17,200 15,500 13,800
— 15,500 13,800
716
31.8 38.1
1500 1250 1000 625 500
1500 1250 1000 625 500
103 86 69 43 34
103 86 69 43 34
10,300 8600 6900 4300 3400
10,300 8600 6900 4300 3400
50.8
375
375
26
26
2600
2600
-4 -5
0.188 0.250 0.313
4.8 6.4 7.9
-6 -8
0.375 0.500
9.5 12.7
-10 -12 -16
0.625 0.750 1.000
15.9 19.1 25.4
-20 -24
1.250 1.500
-32
2.000
TEST TEMPERATURE
NUMBER OF CYCLES
Hose Identification
HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) (kPa) SIZE (in) (mm) 100R1 716 100R1 716 100R1 716
-3 to -16 125% of W.P.◆ +212°F (+100°C) 150,000 -20 to -32 100% of W.P. +212°F (+100°C) 150,000 All Sizes 100% of W.P.◆ +275°F (+135°C) 250,000 -3 to -16 125% of W.P. +212°F (+100°C) 150,000 -20 to -32 100% of W.P. +212°F (+100°C) 150,000 TEMPERATURE CAPABILITIES 100R1: 716:
-40°F to +212°F -40°F to +275°F
(-40°C to +100°C) (-40°C to +135°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, 716 hose is aged at +300°F (+150°C) for 200 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks.
◆ W.P. = Working Pressure
DIN 20022 1SN vs Cat One-Wire Braid Hose (716) WORKING PRESSURE* DIN DN SIZE
IMPULSE TESTING
INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. DIAMETER DIAMETER (psi) (BAR) (in) (mm) 20022 1SN 716 20022 1SN 716
MAX. WORK. PRESS. (kPa) 20022 1SN 716
5
0.188
4.8
3625
—
250
—
25,000
—
6 8
0.250 0.313
6.4 7.9
3263 3118
3263 —
225 215
225 —
22,500 21,500
22,500 —
10 12 16 20 25
0.375 0.500 0.625 0.750 1.000
9.5 12.7 15.9 19.1 25.4
2610 2320 1885 1523 1276
2610 2320 1885 1523 1276
180 160 130 105 88
180 160 130 105 88
18,000 16,000 13,000 10,500 8800
18,000 16,000 13,000 10,500 8800
32 40 50
1.250 1.500 2.000
31.8 38.1 50.8
914 725 580
914 725 580
63 50 40
63 50 40
6300 5000 4000
6300 5000 4000
TEST PRESSURE DIN 20022 1SN
TEST TEMPERATURE
NUMBER OF CYCLES
-5 to -25 125% of W.P.◆ +212°F (+100°C) 150,000 -32 to -50 100% of W.P. +212°F (+100°C) 150,000 716
-5 to -25 125% of W.P. -32 to -50 100% of W.P.
+212°F (+100°C) 150,000 +212°F (+100°C) 150,000
TEMPERATURE CAPABILITIES DIN 20022 1SN: -40°F to +212°F 716: -40°F to +275°F
(-40°C to +100°C) (-40°C to +100°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, 716 hose was tested against the DIN 20022 1SN specifications for use in DIN applications.
◆ W.P. = Working Pressure
9
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE 100R2AT◊ vs Cat Two-Wire Braid Hose (294) IMPULSE TESTING
Hose Identification
WORKING PRESSURE* HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) SIZE (in) (mm) 100R2 294 100R2 294
-3
MAX. WORK. PRESS. (kPa) 100R2 294
TEST PRESSURE
5000 5000
— 5000
345 345
— 345
34,500 34,500
— 34,500
100R2
4250 4000 3500
4250 4000 3500
293 276 241
293 276 241
29,300 27,600 24,100
29,300 27,600 24,100
All Sizes 133% of W.P.
2750 2250
2750 2250
190 155
190 155
19,000 15,500
19,000 15,500
100R2: 294:
31.8 38.1
2000 1625 1250
2000 1625 1250
138 112 86
138 112 86
13,800 11,200 8600
13,800 11,200 8600
50.8 63.5
1125 —
1125 400
78 —
78 28
7800
7800 2758
-4 -5
0.188 0.250 0.313
4.8 6.4 7.9
-6 -8
0.375 0.500
9.5 12.7
-10 -12 -16
0.625 0.750 1.000
15.9 19.1 25.4
-20 -24
1.250 1.500
-32 -40
2.000 2.500
All Sizes 133% of W.P.◆
TEST TEMPERATURE
NUMBER OF CYCLES
+212°F (+100°C) 200,000
294
+212°F (+100°C) 500,000
TEMPERATURE CAPABILITIES -40°F to +212°F (-40°C to +100°C) -40°F to +212°F (-40°C to +100°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, 294 hose is aged at +225°F (+107°C) for 150 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks.
◆W.P. = Working Pressure ◊AT designates the thinner cover used on no-skive hose.
DIN 20022 2SN vs Cat Two-Wire Braid Hose (294) WORKING PRESSURE* DIN DN SIZE
IMPULSE TESTING
INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. DIAMETER DIAMETER (psi) (BAR) (in) (mm) 20022 2SN 294 20022 2SN 294
MAX. WORK. PRESS. (kPa) 20022 2SN 294
TEST PRESSURE DIN 20022 2SN
TEST TEMPERATURE
5 6
0.188 0.250
4.8 6.4
6018 5800
— 5800
415 400
— 400
41,500 40,000
— 40,000
8 10
0.313 0.375
7.9 9.5
5075 4785
5075 4785
350 330
350 330
35,000 33,000
35,000 33,000
All Sizes 133% of W.P.
12 16 20
0.500 0.625 0.750
12.7 15.9 19.1
3988 3625 3118
3988 3625 3118
275 250 215
275 250 215
27,500 25,000 21,500
27,500 25,000 21,500
TEMPERATURE CAPABILITIES
25 32
1.000 1.250
25.4 31.8
2393 1813
2393 1813
165 125
165 125
16,500 12,500
16,500 12,500
40 50
1.500 2.000
38.1 50.8
1305 1160
1305 1160
90 80
90 80
9000 8000
9000 8000
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, 294 hose was tested against the DIN 20022 2SN specifications for use in DIN applications.
◆W.P. = Working Pressure
10
NUMBER OF CYCLES
All Sizes 133% of W.P.◆ +212°F (+100°C) 200,000 294
+212°F (+100°C) 200,000
DIN 20022 2SN: -40°F to +212°F (-40°C to +100°C) 294: -40°F to +212°F (-40°C to +100°C)
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE 100R4 vs Cat Hydraulic Suction Hose (844) IMPULSE TESTING
WORKING PRESSURE*
-3 -4
0.188 0.250
4.8 6.4
— —
— —
— —
— —
— —
— —
-5 -6
0.313 0.375
7.9 9.5
— —
— —
— —
— —
— —
— —
-8 -10
0.500 0.625
12.7 15.9
— —
— —
— —
— —
— —
— —
-12 -16 -20
0.750 1.000 1.250
19.1 25.4 31.8
300 250 200
300 250 200
21 17 14
21 17 14
2100 1700 1400
2100 1700 1400
-24 -32
1.500 2.000
38.1 50.8
150 100
150 100
10 7
10 7
1000 700
1000 700
-40 -48 -56
2.500 3.000 3.500
63.5 76.2 88.9
— — —
200 200 200
— — —
14 14 14
— — —
1379 1379 1379
TEST PRESSURE
TEST TEMPERATURE
NUMBER OF CYCLES
100R4
All Sizes NO IMPULSE TESTING PERFORMED 844
All Sizes NO IMPULSE TESTING PERFORMED TEMPERATURE CAPABILITIES 100R4: 844:
-40°F to +212°F -40°F to +275°F
(-40°C to +100°C) (-40°C to +135°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose.
SAE 100R7 vs Cat Thermoplastic Hose (1028) WORKING PRESSURE*
IMPULSE TESTING
HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) (kPa) SIZE (in) (mm) 100R7 1028 100R7 1028 100R7 1028
TEST PRESSURE
-3 -4
0.188 0.250
4.8 6.4
3000 2750
3000 2750
207 190
207 190
20,700 19,000
20,700 19,000
100R7
-5 -6 -8
0.313 0.375 0.500
7.9 9.5 12.7
2500 2250 2000
2500 2250 2000
172 155 138
172 155 138
17,200 15,500 13,800
17,200 15,500 13,800
All Sizes 100% of W.P. OR 133% of W.P.
-10 -12 -16 -20 -24
0.625 0.750 1.000 1.250 1.500
15.9 19.1 25.4 31.8 38.1
1500 1250 1000 — —
— 1250 — — —
103 86 69 — —
— 86 — — —
10,300 8,600 6,900 — —
— 8,600 — — —
-32
2.000
50.8
—
—
—
—
—
—
TEST TEMPERATURE
All Sizes 125% of W.P.◆ +200°F (+93°C)
NUMBER OF CYCLES
150,000
1028
+200°F (+93°C) +200°F (+93°C)
1,000,000 150,000#
TEMPERATURE CAPABILITIES 100R7: 1028:
-40°F to +200°F (-40°C to +93°C) -70°F to +200°F (-56°C to +93°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, 1028 hose is aged at +200°F (+93°C) for 150 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks.
◆W.P. = Working Pressure
11
Hose Identification
HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) (kPa) SIZE (in) (mm) 100R4 844 100R4 844 100R4 844
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE 100R5 vs Cat One-Wire Braid Hose - Fabric Covered (556) IMPULSE TESTING
Hose Identification
WORKING PRESSURE* HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) (kPa) SIZE (in) (mm) 100R5 556 100R5 556 100R5 556
TEST PRESSURE
-4 -5
0.188 0.250
4.8 6.4
3000 3000
3000 3000
207 207
207 207
20,700 20,700
20,700 20,700
100R5
-6 -8
0.313 0.406
7.9 10.3
2250 2000
2250 2000
155 138
155 138
15,500 13,800
15,500 13,800
556
-10 -12
0.500 0.625
12.7 15.9
1750 1500
1750 1500
121 103
121 103
12,100 10,300
12,100 10,300
-16 -20 -24
0.875 1.125 1.375
22.2 28.6 34.9
800 625 500
800 625 500
55 43 34
55 43 34
5500 4300 3400
5500 4300 3400
-32
1.813
46.0
350
—
24
—
2400
—
TEST TEMPERATURE
NUMBER OF CYCLES
-4 to -16 125% of W.P.◆ +212°F (+100°C) 150,000 -20 to -32 100% of W.P. +212°F (+100°C) 100,000 -4 to -16 125% of W.P. -20 to -32 100% of W.P.
+250°F (+120°C) 150,000# +250°F (+120°C) 100,000#
TEMPERATURE CAPABILITIES 100R5: 556:
-40°F to +212°F (-40°C to +100°C) -40°F to +250°F (-40°C to +121°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #For this test, 556 hose is aged at +275°F (+135°C) for 200 hours and -25°F (-32°C) for 18 hours prior to impulse testing. In addition, in the middle and at the end of each impulse test, no leaks are allowed after the oil cools to room temperature and the test machine is restarted. SAE does not require aged samples or room temperature leak checks.
◆W.P. = Working Pressure
SAE J1402 vs Cat Engine and Air Brake Hose (1130) WORKING PRESSURE*
IMPULSE TESTING
HOSE INNER INNER MAX. WORK. PRESS. MAX. WORK. PRESS. MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) (BAR) (kPa) SIZE (in) (mm) J1402 1130 J1402 1130 J1402 1130
-4 -5 -6 -8 -10 -12 -16 -20
0.188 0.250 0.313 0.406 0.500 0.625 0.875 1.125
4.8 6.4 7.9 10.3 12.7 15.9 22.2 28.6
225 225 225 225 225 225 — —
2000 1500 1500 1250 1000 750 400 300
16 16 16 16 16 16 — —
138 103 103 86 69 52 28 21
1600 1600 1600 1600 1600 1600 — —
13,800 10,300 10,300 8,600 6,900 5,200 2,800 2,100
-24 -32
1.375 1.813
34.9 46.0
— —
250 —
— —
17 —
— —
1,700 —
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #Cat 1130 hose passes a severe hot oil circulation test that exposes the hose liner to +300°F oil for 750 hours with no cracking or leakage permitted; SAE J1402 requires no such test.
12
TEST PRESSURE
TEST TEMPERATURE
NUMBER OF CYCLES
J1402
All Sizes
NO IMPULSE TESTING PERFORMED
1130
All Sizes
NO IMPULSE TESTING PERFORMED
TEMPERATURE CAPABILITIES J1402: 1130:
-40°F to +200°F (-40°C to + 93°C) -40°F to +275°F (-40°C to +135°C)
Hose Industry Standard Comparison (SAE / DIN / JIS) SAE J51 Type D vs Cat Air Conditioning Hose (1543) WORKING PRESSURE*
IMPULSE TESTING
-4 -5 -6 -8 -10 -12 -16 -20 -24 -32
0.188 0.250 0.313 0.406 0.500 0.625 0.875 1.125 1.375 1.813
4.8 6.4 7.9 10.3 12.7 15.9 22.2 28.6 34.9 46.0
— — 450 450 450 300 — — — —
MAX. WORK. PRESS. (BAR) J51-D 1543
— — 500 500 — 500 — — — —
— — 31 31 31 31 — — — —
— — 34 34 — 34 — — — —
MAX. WORK. PRESS. (kPa) J51-D 1543
— — 3100 3100 3100 3100 — — — —
— — 3400 3400 — 3400 — — — —
TEST PRESSURE
TEST TEMPERATURE
NUMBER OF CYCLES
Hose Identification
HOSE INNER INNER MAX. WORK. PRESS. DASH DIAMETER DIAMETER (psi) SIZE (in) (mm) J51-D 1543
J51-D
All Sizes
NO IMPULSE TESTING PERFORMED
1543
All Sizes
NO IMPULSE TESTING PERFORMED
TEMPERATURE CAPABILITIES J51-D: 1543:
-22°F to +248°F (-30°C to +120°C) -22°F to +257°F (-30°C to +125°C)
*Minimum burst pressure will always be 4X the maximum working pressure for both Caterpillar and SAE standard hose. #1543 meets SAE standards for type-D hose concerning Freon permeation and moisture ingression. 1543 has a maximum Freon permeation of 5 lbs/ft2 per year at +300°F (+150°C). 1543 has a maximum moisture ingression of 16 g/100 in2 per year. This hose can be used with SAE J2064 R134A refrigerant. Maximum permeation rate is 2 lbs/ft2 per year at +176°F (+80°C).
Recommended Caterpillar Hose Replacements for SAE Specification Hoses CATERPILLAR HOSE REPLACEMENTS for the indicated dash size SAE SPECIFICATION
100R1 100R2 100R3 100R4 100R5 100R6 100R7 100R8 100R9 100R10 100R11 100R12 100R13 100R14 100R15
HOSE CONSTRUCTION
Dash
1 wire braid 2 wire braid 2 fiber braid Helical wire 1 wire braid 1 fiber braid Thermoplastic fiber braid Thermoplastic fiber braid 4 spiral wire 4 spiral wire 6 spiral wire 4 spiral wire 4 or 6 spiral wire Teflon® lined 4 or 6 spiral wire
-3
-4
** ** ** * * ** 1028 ** * ** ** * * ** **
716 294 716 * 556 716 1028 ** * ** ** * * ** **
-5
-6
-8
294 716 716 294 294 294 294 716 716 * * * 556 556 556 294 716 716 1028 1028 1028 * ** 294 * ** XT-3™ ES * ** ** * ** ** * XT-3 ES XT-3 ES * * * * ** ** ** XT-6™ ES XT-6 ES
-10
716 294 716 * 556 716 ** 294 * * * * * * **
-12
-16
716 716 294 294 716 716 844 844 556 556 * * 1028 ** 294 294 XT-3 ES XT-3 ES XT-5™ ESXT-5 ES ** XT-5 ES XT-3 ES XT-3 ES XT-5 ES XT-5 ES ** ** XT-6 ES XT-6 ES
-20
-24
-32
716 294 716 844 556 * * * XT-3 ES XT-5 ES XT-5 ES XT-3 ES XT-5 ES * XT-6 ES
716 294 * 844 556 * * * XT-3 ES XT-5 ES XT-5 ES XT-3 ES XT-5 ES * **
716 294 * 844 ** * * * XT-3 ES XT-5 ES XT-5 ES XT-3 ES XT-5 ES * **
* No SAE specification in this size ** No Caterpillar replacement hose available
Recommended Caterpillar Hose Replacements for DIN Specification Hoses DIN SPECIFICATION
20021 20021 20021 20022 20022 20023 20023
HOSE CONSTRUCTION
1TE 2TE 3TE 1ST, 1SN 2ST, 2SN 4SP 4SH 4
1 fiber braid 2 fiber braid 2 fiber braid 1 wire braid 2 wire braid 4 spiral wire or 6 spiral wire
DN Dash
5 -3
6 -4
1028 1028 1028 ** ** * *
716 716 716 716 294 ** *
CATERPILLAR HOSE REPLACEMENTS for the indicated DN size/dash size 8 10 12 16 20 25 32 40 -5 -6 -8 -10 -12 -16 -20 -24
294 294 294 294 294 * *
716 716 716 716 294 1956 *
716 716 716 716 294 1956 *
50 -32
716 * * * * * 716 716 716 * * * 716 716 716 716 XT-3 ES XT-3 ES 716 716 716 716 716 716 294 294 294 294 294 294 1956 1956 1956 1956 1956 1956 * XT-6 ES XT-6 ES XT-5 ES XT-5 ES XT-5 ES
* No DIN specification in this size ** No Caterpillar replacement hose available
13
Hose Industry Standard Comparison (SAE / DIN / JIS) DIN 20021, 20022, and 20023 Specifications: Maximum Working Pressure (bar/psi) Hose Identification
DIN SPECIFICATION
HOSE CONSTRUCTION
20021 1TE
1 fiber braid
20021 2TE
2 fiber braid
20021 3TE
2 fiber braid
20022 1ST, 1SN
1 wire braid
20022 2ST, 2SN
2 wire braid
20023 4SP
4 spiral wire
20023 4SH
4 or 6 spiral wire
UNITS
DN Dash
bar psi bar psi bar psi bar psi bar psi bar psi bar psi
MAXIMUM WORKING PRESSURE (bar/psi) for the indicated DN size/dash size 8 10 12 16 20 25 32 40 -5 -6 -8 -10 -12 -16 -20 -24
5 -3
6 -4
25 363 80 1160 160 2320 250 3625 415 6018 * * * *
25 363 75 1088 145 2103 225 3263 400 5800 450 6522 * *
20 290 68 986 130 1885 215 3118 350 5075 * * * *
20 290 63 914 110 1595 180 2610 330 4785 445 6453 * *
16 232 58 841 93 1349 160 2320 275 3988 415 6018 * *
16 232 50 725 80 1160 130 1885 250 3625 350 5075 * *
* * 45 653 70 1015 105 1523 215 3118 350 5075 420 6090
* * 40 580 55 798 88 1276 165 2393 280 4060 380 5510
50 -32
* * * * * * * * 45 40 653 580 63 50 914 725 125 90 1813 1305 210 185 3045 2683 325 290 4713 4205
* * * * 33 479 40 580 80 1160 165 2393 250 3625
* No DIN specification in this size
JIS K6349 Specifications: Hose Construction HOSE CLASS
-3
-5
35 kg/cm2 500 psi 70 kg/cm2 1000 psi 105 kg/cm2 1500 psi 140 kg/cm2 2000 psi
*
1 fb
*
1 fb
1 fb
*
1 fb
*
1 wb
*
1 wb
1 wb
1 wb
*
1 wb
*
1 wb
1 wb
*
1 wb
*
1 wb
175
175 kg/cm2 2500 psi
*
1 wb
*
210
210 kg/cm2 3000 psi 250 kg/cm2 3500 psi 280 kg/cm2 4000 psi 320 kg/cm2 4500 psi 350 kg/cm2 5000 psi
*
1 wb
*
70 105 140
250 280 320 350
NOM Dash
HOSE CONSTRUCTION for the indicated hose classes 9 12 15 19 25 -6 -8 -10 -12 -16
6 -4
35
MAXIMUM WORKING PRESSURE
32 -20
38 -24
50 -32
1 fb
1 wb
1 wb
1 wb
1 wb
1 wb
2 wb
2 wb
2 wb
1 wb
1 wb
2 wb
2 wb
1 wb
2 wb
2 wb
2 wb
2 wb
2 wb
2 wb
2 wb
2 or 3 wb
*
*
*
*
2 wb
2 wb
2 or 3 wb
3 wb
3 wb
4 sw
4 sw
6 sw
2 wb
*
2 wb
2 or 3 wb
3 wb
3 wb
4 sw
6 sw
6 sw
6 sw
*
2 wb
*
3 wb
3 wb
4 sw
4 sw
4 sw
6 sw
6 sw
6 sw
*
*
*
*
4 sw
4 sw
4 sw
6 sw
6 sw
6 sw
6 sw
*
2 wb
*
4 sw
4 sw
4 sw
4 sw
6 sw
6 sw
6 sw
6 sw
* No JIS specification this size Construction nomenclature: number = layers of reinforcement, f = fiber, w = wire, b = braid, s = spiral Example: 1 wb hose has 1 layer of wire braided reinforcement
14
1 wb 2 sw 1 wb 2 sw
1 wb 2 sw 1 wb 2 sw
4 sw
Hose Industry Standard Comparison (SAE / DIN / JIS) Recommended Caterpillar Hose Replacements for JIS Specification Hoses MAXIMUM WORKING NOM PRESSURE Dash
-3
6 -4
CATERPILLAR HOSE REPLACEMENTS for the indicated nominal size/dash size 9 12 15 19 25 32 -5 -6 -8 -10 -12 -16 -20
38 -24
50 -32
35
35 kg/cm2 500 psi
*
716
*
716
716
*
716
716
716
716
294
70
70 kg/cm2 1000 psi
*
716
*
716
716
716
716
716
294
294
294
105
105 kg/cm2 1500 psi 140 kg/cm2 2000 psi 175 kg/cm2 2500 psi 210 kg/cm2 3000 psi 250 kg/cm2 3500 psi 280 kg/cm2 4000 psi 320 kg/cm2 4500 psi 350 kg/cm2 5000 psi
*
716
*
716
716
716
294
294
294
XT-3™ ES XT-3 ES
*
716
*
716
716
294
294
294
294
XT-3 ES XT-3 ES
*
716
*
294
294
294
294
294
*
*
294
*
294
294
294
294
*
294
*
294
294
294
*
294
*
294
294
*
*
*
*
XT-6™ ES
*
294
*
140 175 210 250 280 320 350
XT-6 ES XT-6 ES
*
Hose Identification
HOSE CLASS
*
XT-3 ES XT-3 ES XT-5™ES XT-5 ES
XT-3 ES XT-3 ES XT-5 ES XT-5 ES XT-5 ES
XT-3 ES XT-3 ES XT-3 ES XT-5 ES XT-5 ES XT-5 ES 1956
XT-5 ES XT-5 ES XT-5 ES XT-5 ES XT-5 ES
1956
XT-5 ES XT-5 ES XT-5 ES XT-5 ES XT-5 ES
* No JIS specification this size
15
Hose Working Pressure
Hose Identification
Caterpillar Hydraulic Hose Specifications: Maximum Working Pressure (psi, bars, kg/cm2) CATERPILLAR HOSE HOSE CONSTRUCTION
UNITS
MAXIMUM WORKING PRESSURE (psi, bar, kg/cm2) for the indicated dash size/DN size/nominal size Dash -3 -4 -5 -6 -8 -10 -12 -16 -20 -24 DN 5 6 8 10 12 16 20 25 32 40 Nom 6 9 12 15 19 25 32 38
-32 50 50
XT-6™ ES 4 or 6 spiral wire (2836 / 4136)
psi bar kg/cm2
* * *
* * *
* * *
6000 414 422
6000 414 422
6000 414 422
6000 414 422
6000 414 422
6000 414 422
6000 414 422
* * *
XT-6 (1136)
6 spiral wire
psi bar kg/cm2
* * *
* * *
* * *
6000 414 422
6000 414 422
* * *
6000 414 422
6000 414 422
6000 414 422
6000 414 422
* * *
4 or 6 spiral wire
psi bar kg/cm2
* * *
* * *
* * *
* * *
* * *
* * *
5000 345 352
5000 345 352
5000 345 352
5000 345 352
5000 345 352
XT-3™ ES 4 spiral wire (736 / 4135) 2 textile braid
psi bar kg/cm2
* * *
* * *
* * *
4000 276 281
4000 276 281
4000 276 281
4000 276 281
4000 276 281
3000 207 211
2500 172 176
2500 172 176
1956
4 spiral wire
psi bar kg/cm2
* * *
* * *
* * *
6453 445 454
6018 415 424
5075 350 357
5075 350 357
4060 280 286
3045 210 214
2683 185 189
2393 165 169
716
1 wire braid
psi bar kg/cm2
* * *
2750 190 193
* * *
2250 155 158
2000 138 141
1500 103 105
1250 86 88
1000 69 70
625 43 44
500 34 35
375 26 26
294
2 wire braid
psi bar kg/cm2
* * *
5000 345 350
4250 293 298
4000 276 280
3500 241 245
2750 190 193
2250 155 158
2000 138 140
1625 112 114
1250 86 88
1125 78 79
844 Helical wire (Hydraulic suction)
psi bar kg/cm2
* * *
* * *
* * *
* * *
* * *
* * *
300 21 21
250 17 18
200 14 14
150 10 11
100 7 7
XT-5™ ES (1036)
* No Caterpillar hose available in this size
Caterpillar Special Application Hose Specifications: Maximum Working Pressure (psi, bars, kg/cm2) MAXIMUM WORKING PRESSURE (psi, bar, kg/cm2) for the indicated dash size CATERPILLAR HOSE
HOSE CONSTRUCTION
1028
UNITS
-3
-4
-5
-6
-8
-10
-12
-16
-20
-24
-32
Thermoplastic, 2 fiber braid
psi bar kg/cm2
3000 207 211
2750 190 193
2500 172 176
2250 155 158
2000 138 141
* * *
1250 86 88
* * *
* * *
* * *
* * *
2760
Thermoplastic, 2 fiber braid or wire reinforcement
psi bar kg/cm2
* * *
1500 103 105
1500 103 105
1500 103 105
1500 103 105
* * *
* * *
* * *
* * *
* * *
* * *
556
1 wire braid Fabric covered
psi bar kg/cm2
* * *
3000 207 211
3000 207 211
2250 155 158
2000 138 141
1750 121 123
1500 103 105
800 55 56
625 43 44
500 34 35
* * *
1130 1 wire braid (engine/air brake) 1 textile braid Fabric covered
psi bar kg/cm2
* * *
2000 138 141
1500 103 105
1500 103 105
1250 86 88
1000 69 70
750 52 53
400 28 28
300 21 21
250 17 18
* * *
1543 (air conditioning)
psi bar kg/cm2
* * *
* * *
* * *
500 34 35
500 34 35
* * *
500 34 35
* * *
* * *
* * *
* * *
Thermoplastic, 1 textile braid
* No Caterpillar hose available in this size
16
Hose Fluid Compatibility A C X —
Acceptable Conditional - Under some conditions of temperature and pressure, hose life will be adversely affected. For guidance, consult your Caterpillar dealer hose specialist. Unacceptable Testing Recommended HOSE TYPE XT-6 ES XT-6 716 XT-5 ES 294 XT-3 ES 844 1028 AGENT TO BE CARRIED 1956 556 2760 1130
HOSE TYPE XT-6 ES XT-6 716 XT-5 ES 294 XT-3 ES 844 1028 AGENT TO BE CARRIED 1956 556 2760 1130
Acetate Acid, Dilute (10%)
Brine
X
X
X
X
Ethyl Alcohol
C
A
C
X
X
C
A
Bromine
X
X
—
X
Ethyl Cellulose
X
C
X
X
Acetic Acid, Glacial
X
—
—
—
Butyl Acetate
X
X
—
—
Ethyl Chloride
C
X
—
X
Acetone
C
X
A
A
Butyl Alcohol, Butanol
C
A
C
C
Ethylene Dichloride
X
X
X
X
Acetylene
C
X
—
—
Calcium Bisulfite
X
X
X
X
Ethylene Glycol 2150
A
A
A
A
Air
—
A
A
A
Calcium Chloride
C
A
C
C
Ferric Chloride
X
A
X
X
Aluminum Chloride
C
A
A
A
Calcium Hydroxide
A
A
—
A
Ferric Sulfate
X
A
X
X
Aluminum Flouride 20%
C
A
—
—
Calcium Hypochlorite
X
X
X
X
Ferrous Salt Solutions
X
—
—
—
Aluminum Sulfate
C
A
—
A
Caliche Liquors
A
—
—
A
Formaldehyde
X
X
X
X
Alums
C
A
—
A
Cane Sugar Liquors
—
—
—
A
Formic Acid
X
X
X
X
Ammonia Gas, Cold
C
—
—
—
Carbolic Acid Phenol
X
—
X
X
Freon (see Refrigerant)
Carbon Dioxide
A
A
A
A
Fuel Oil
C
A
A
C
Carbon Disulfide
X
X
C
C
Furfural
C
X
—
C
Carbon Monoxide (Hot)
C
A
C
C
Gasoline
X
C
A
C
Carbon Tetrachloride
X
X
X
C
Gelatine
A
A
—
—
Carbonic Acid
X
—
X
X
Glucose
A
A
—
—
Castor Oil
—
A
A
A
Glue
A
C
C
—
Cellosolve Acetate
X
X
X
X
Glycerine, Glycerol
A
A
A
A
China Wood Oil (Tung)
A
—
—
—
Grease, Petroleum
C
A
A
A
Chlorinated Solvents
X
X
X
X
Green Sulfate Liquor
X
X
X
X
Chlorine (Dry)
C
X
X
X
Heptane
A
—
—
A
Chlorine (Wet)
X
X
—
—
Hexane
A
—
A
A
Chloracetic Acid
X
X
X
X
Chloroform
X
X
X
X
Oils A A
A
Chlorosulphonic Acid
X
X
—
X
A
A
A
Chromic Acid 30%
X
X
X
X
Citric Acid 10%
X
—
X
X
A
A
A
Coke Oven Gas
C
C
—
A
Hydraulic Fluids and Lubricating Straight Petroleum Base A Water and Petroleum Emulsion (FR) C Water and Glycol Solution* A Straight Phosphate — Ester (FR) X
X
—
A
Copper Chloride
X
A
X
X
Copper Sulfate
X
A
X
X
Corn Oil
A
—
—
—
Cottonseed Oil
A
C
—
C
Ammonia, Liquid (Anhydrous)
X
X
X
X
Ammonia, Aqueous
A
—
—
—
Ammonia, Chloride
X
X
X
X
Ammonium Hydroxide
C
C
—
C
Ammonium Nitrate
C
A
—
C
Ammonium Phosphate
X
A
X
X
Ammonium Sulfate
C
A
—
C
Amyl Acetate
X
X
X
X
Amyl Alcohol
X
—
X
X
Aniline, Aniline Oil
X
X
X
C
Aniline Dyes
X
X
X
X
Animal Fats
—
C
C
C
Asphalt up to 180° F
X
X
X
X
Barium Chloride
C
A
—
C
Barium Hydroxide
C
A
—
C
Barium Sulfide
X
X
X
X
Beer
X
X
X
X
Beet Sugar Liquors
—
C
—
—
Benzene, Benzol
X
X
C
A
Benzine (Petroleum Ether)
—
X
—
A
Benzine (Petroleum Naphtha)
Creosote
X
X
X
X
—
X
—
A
Crude Oil
X
X
X
X
Black Sulfate Liquor
—
C
—
C
Diesel Oil Light
C
A
A
A
Borax
C
C
—
C
Dowtherm A and E
—
X
—
C
Boric Acid
X
A
X
X
Ethers
X
C
C
A
Brake Fluid
C
X
—
X
Ethyl Acetate
X
X
—
C
Phosphate — Ester and Petroleum Oil Blend (FR) — X C Ester Blend (MIL-L-7808) X X — Silicone Oils A — —
Hose Identification
HOSE TYPE XT-6™ ES XT-6 716 XT-5™ ES 294 XT-3™ ES 844 1028 AGENT TO BE CARRIED 1956 556 2760 1130
C
A A —
Hydrobromic Acid
X
X
Hydrochloric Acid
X
X
— X
Hydrocyanic Acid
C
X
—
—
Hydrofluoric Acid, Hot
X
X
X
X
Hydroflousilic Acid
X
X
X
X (cont.)
CAUTION: This chart is meant to offer general guidelines for the use of Cat Hose and Couplings with the substances listed in the chart. Many factors, such as temperature, concentration and length of exposure, are relevant to individual situations. The chart is based on the compatibility of these substances with the couplings and the inner liner of the hose. There may be instances where the outer cover could be adversely affected by substances which would not chemically affect the inner liner. Conversely, some substances which adversely affect the inner liner of Cat Hose may not have a deteriorating effect on the outer cover. * TO 85° C.
17
Hose Fluid Compatibility A C
Hose Identification
X —
Acceptable Conditional - Under some conditions of temperature and pressure, hose life will be adversely affected. For guidance, consult your Caterpillar dealer hose specialist. Unacceptable Testing Recommended
HOSE TYPE XT-6™ ES XT-6 716 XT-5™ ES 294 XT-3™ ES 844 1028 AGENT TO BE CARRIED 1956 556 2760 1130
HOSE TYPE XT-6 ES XT-6 716 XT-5 ES 294 XT-3 ES 844 1028 AGENT TO BE CARRIED 1956 556 2760 1130
HOSE TYPE XT-6 ES XT-6 716 XT-5 ES 294 XT-3 ES 844 1028 AGENT TO BE CARRIED 1956 556 2760 1130
Hydrogen
Oleic Acid
X
C
X
X
Sodium Sulfate
Oleum Spirits
X
X
X
X
Oxalic Acid
C
C
—
C
Sodium Thiosulfate “Hypo”
X
X
X
X
Oxygen
X
X
X
X
Soybean Oil
A
A
—
A
Ozone
—
X
C
A
Stannic Chloride
X
X
X
X
Paint
—
X
A
X
Steam — up to 250° F
X
X
X
X
PalmIitic Acid
X
X
X
X
Stearic Acid
C
C
—
C
Perchlorethylene
X
X
X
C
Sulfur
A
—
A
—
Sulfur Chloride
C
C
—
C
Sulfur Dioxide
X
X
X
X
Sulfur Trioxide
X
X
X
X
X
Sulfuric Acid — 10% Cold X
—
—
— —
Hydrogen Peroxide (Dilute)
C X
C X
A —
X A
Hydrogen Peroxide (Concentrated)
X
X
X
X
Hydrogen Sulfide
X
X
X
X
Isooctane
—
—
A
C
Isopropyl Alcohol
—
C
A
A
Kerosene
C
—
A
A
KLPG
—
X
X
X
Lacquer
X
X
X
X
Lacquer Solvents
X
X
X
Petroleum Oils (see Hydraulic Fluids) Phosphoric Acid (Commercial)
A X
A X
A X
A
—
A
—
A
Lactic Acid
X
X
X
X
Picric Acid, Molten
X
X
—
X
Sulfuric Acid — 10% Hot
X
—
—
Linseed Oil
A
A
A
A
Picric Acid, Solution
C
X
—
X
Sulfuric Acid — 75% Cold X
—
—
—
Potassium Chloride
X
A
X
X
Sulfuric Acid — 75% Hot
—
—
—
Lubricating Oils (see Hydraulic Fluids)
X
Magnesium Chloride
X
A
X
X
Potassium Cyanide
A
A
—
A
Sulfuric Acid — 95% Cold X
—
X
X
Magnesium Hydroxide
C
C
—
C
Potassium Hydroxide
X
C
—
C
Sulfuric Acid — 95% Hot
X
—
—
—
A
A
—
A
Sulfuric Acid — Fuming
X
—
—
X
Tannic Acid
X
C
X
X
Tar
X
X
X
X
Tartaric Acid
X
X
X
X
Toluene
X
X
C
C
X
X
X
X
Magnesium Sulfate
A
A
—
A
Potassium Sulfate
Mercuric Chloride
C
—
—
—
Mercury
A
A
A
A
Methane
—
C
C
A
Refrigerant ** Freon 12 Freon 13 Freon 22 Freon R134a
C — — —
A — X X
X — X X
X — X X
Methyl Alcohol, Methanol
C
A
C
C
Sea Water
—
C
X
X
Methyl Chloride, Cold
X
X
X
C
Trichlorethylene
Sewage
—
—
—
C
Methyl Methyl Ketone
—
X
C
C
Turpentine
X
X
A
C
Soap Solution
—
A
A
A
Methyl Isopropyl — Ketone
Varnish
—
X
C
C
—
X
A
X
Soda Ash, Sodium Carbonate
—
A
C
A
Vinegar
—
X
C
A
Mineral Oil
—
A
A
A
Sodium Bisulfate
X
A
X
X
Water
C
C
C
C
Naphtha
C
—
A
A
Sodium Chloride
X
X
X
X
Water (over +150° F)
A
C
X
—
Sodium Cyanide
—
—
—
A
Whiskey
—
A
A
—
Wine
—
—
—
—
Xylene
—
X
C
X
Zinc Chloride
C
C
C
X
Zinc Sulfate
C
C
—
X
Naphthalene
X
X
A
A
Natural Gas
X
X
X
X
Sodium Hydroxide 50%
X
X
—
A
Nickel Chloride
X
X
X
X
Sodium Hypochlorite
X
X
X
X
Nickel Sulfate
X
X
X
X
Sodium Nitrate
—
C
—
A
Nitric Acid, Crude
X
X
—
X
Sodium Perborate
X
X
X
X
Nitric Acid 10%
X
X
—
X
Sodium Peroxide
X
X
X
X
Nitric Acid 70%
X
X
X
X
Sodium Phosphates
X
X
X
X
Nitrobenzene
X
X
X
X
Sodium Silicate
—
A
—
A
CAUTION: This chart is meant to offer general guidelines for the use of Cat Hose and Couplings with the substances listed in the chart. Many factors, such as temperature, concentration and length of exposure, are relevant to individual situations. The chart is based on the compatibility of these substances with the couplings and the inner liner of the hose. There may be instances where the outer cover could be adversely affected by substances which would not chemically affect the inner liner. Conversely, some substances which adversely affect the inner liner of Cat Hose may not have a deteriorating effect on the outer cover. ** Cat 1543 Air Conditioning Hose is Acceptable with Freon-12 and Freon-R134A
18
Coupling Identification Thread Guide THREAD DASH SIZE
NPTF (1) THREAD SIZE (in-TPI)
-2 -3
1 8
-4 -5
1 4
-6 -8 -10 -12 -14
3 4
JIC 37° THREAD SIZE (in-TPI)
/
SAE 45° THREAD SIZE (in-TPI)
/ - 27 --
5 16
- 24 / - 24
5 16
3 8
3 8
/ - 18 --
7 16
- 20 / - 20
7 16
1 2
1 2
3 8
/ - 18 / - 14 --
9 16
/
1 2
3 4
- 18 / - 16 7/8 - 14
/
/ /
ORFS (2) THREAD SIZE (in-TPI)
- 24 / - 24
STOR (3) THREAD SIZE (in-TPI)
---
5 16
- 18 --
7 16
- 16 - 16 1 - 14
/
/
NPSM (4) THREAD SIZE (in-TPI)
- 24 / - 24
1 8
- 20 / - 20
1 4
3 8
/ - 27 --
5 16
/
/ - 18 --
7 16
- 28 / - 24
1 8
- 24 / - 20
1 4
/ - 18 / - 14 --
3 8
---
/ - 19 --
---
/ - 19 / - 14 5/8 - 14
M20 x 1.5 M24 x 1.5 M30 x 1.5
/ - 14 --
M36 x 1.5 -M45 x 1.5 M52 x 1.5 --
5 8
/ - 18 / - 16 7/8 - 14
11 16
9 16
/
5 8
3 4
1 2
/ - 18 / - 18 7/8 - 18
3 8
13 16
- 18 / - 16 7/8 - 14
3 8
3 4
3 4
1 2
3 4
/ - 14 --
11/16 - 16 --
3 4
1 2
/ - 14 --
11/16 - 12 13/16 - 12
11/16 - 14 11/4 - 12
13/16 - 12 --
11/16 - 12 13/16 - 12
-16 -20 -24
1 - 111/2 11/4 - 111/2 11/2 - 111/2
15/16 - 12 15/8 - 12 17/8 - 12
13/8 - 12 ---
17/16 - 12 111/16 - 12 2 - 12
15/16 - 12 15/8 - 12 17/8 - 12
1 - 111/2 11/4 - 111/2 11/2 - 111/2
----
1 - 11 11/4 - 11 11/2 - 11
-32
2 - 111/2
21/2 - 12
--
--
21/2 - 12
2 - 111/2
--
2 - 11
(1) (2) (3) (4) (5) (6) (7)
GAZ (7) THREAD SIZE (dia x pitch)
/ - 28 --
9 16
1 2
/
BSP (6) THREAD SIZE (in-TPI)
- 20 / - 20
/ /
/
SAE INV. (5) THREAD SIZE (in-TPI)
--
NPTF - NATIONAL PIPE TAPERED FUEL (REF. SAE J476) ORFS - O-RING FACE SEAL (REF. SAE J1453) STOR - SAE STRAIGHT THREAD O-RING (REF. SAE J514) NPSM - NATIONAL PIPE STRAIGHT MECHANICAL SAE INV. - SAE INVERTED FLARE (REF. SAE J512) BSP - BRITISH STANDARD PIPE GAZ - FRENCH METRIC GAZ
Coupling Identification
Flange Head Guide Head Thickness
Head Size
FLANGE DASH SIZE
HEAD SIZE (in)
SAE CODE 61* HEAD HEAD SIZE THKNS (mm) (in)
HEAD THKNS (mm)
HEAD SIZE (in)
SAE CODE 62** HEAD HEAD SIZE THKNS (mm) (in)
HEAD THKNS (mm)
HEAD SIZE (in)
Caterpillar HEAD HEAD SIZE THKNS (mm) (in)
HEAD THKNS (mm)
-8
1.19
30.2
.265
6.7
1.25
31.8
.305
7.8
--
--
--
-10***
1.34
34.0
.265
6.7
--
--
--
--
--
--
--
---
-12 -16
1.50 1.75
38.1 44.5
.265 .315
6.7 8.0
1.63 1.88
41.3 47.6
.345 .375
8.8 9.5
1.63 1.88
41.3 47.6
.560 .560
14.2 14.2
-20 -24 -32
2.00 2.38 2.81
50.8 60.3 71.4
.315 .315 .375
8.0 8.0 9.5
2.13 2.50 3.13
54.0 63.5 79.4
.405 .495 .495
10.3 12.6 12.6
2.13 2.50 3.13
54.0 63.5 79.4
.560 .560 .560
14.2 14.2 14.2
-40 -48
3.31 4.00
84.1 101.6
.375 .375
9.5 9.5
---
---
---
---
---
---
---
---
-56 -64
4.50 5.00
114.3 127.0
.375 .375
9.5 9.5
---
---
---
---
---
---
---
---
* All CODE 61 flange head hose couplings and adapter fittings meet or exceed SAE J518 CODE 61 requirements for hydraulic split flange connections. The CODE 61 flange head design can withstand a maximum operating pressure of 3000 to 5000 psi depending on size. ** All couplings having Caterpillar flange heads meet or exceed the performance requirements of SAE J518 CODE 62 specifications for hydraulic split flange connections. The thickness of Caterpillar flange heads is greater than CODE 62 so that special split flanges are required for proper installation. The CODE 62 flange head design can withstand a maximum operating pressure of 6000 psi regardless of size. *** Not SAE standard - Komatsu style. Note 1: Reference charts for split flange part numbers. Note 2: SAE CODE 61, DIN Form R, and JIS Type I couplings are interchangeable except for bolt sizes. Note 3: SAE CODE 62, DIN Form S, and JIS Type II couplings are interchangeable except for bolt sizes.
19
Coupling Identification Thread Identification Table National Pipe Tapered for Fuels (NPTF) 60° Thread Angle
30° NPTF Male
NPTF Port
DASH SIZE (dash)
INCH SIZE (in)
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
-2
1/8
1/8
- 27
8.7
0.34
10.3
0.41
-4
1/4
1/4
- 18
11.9
0.47
14.3
0.56
-6
3/8
3/8
- 18
15.1
0.59
17.5
0.69
-8
1/2
1/2
- 14
18.3
0.72
21.4
0.84
-12
3/4
3/4
- 14
23.8
0.94
27.0
1.06
-16
1
1 - 111/2
30.2
1.19
33.3
1.31
-20
11/4
11/4 - 111/2
38.9
1.53
42.9
1.69
-24
11/2
11/2 - 111/2
44.5
1.75
48.4
1.91
-32
2
2 - 111/2
57.2
2.25
60.3
2.38
Thread Identification Table National Pipe Straight Mechanical (NPSM) 60° Thread Angle
Coupling Identification
30° NPTF Male
30° NPSM Female
DASH SIZE (dash)
INCH SIZE (in)
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
-2
1/8
1/8
- 27
8.7
0.34
10.3
0.41
-4
1/4
1/4
- 18
11.9
0.47
14.3
0.56
-6
3/8
3/8
- 18
15.9
0.63
17.5
0.69
-8
1/2
1/2
- 14
19.1
0.75
21.4
0.84
-12
3/4
3/4
- 14
24.6
0.97
27.0
1.06
-16
1
1 - 111/2
31.0
1.22
33.3
1.31
-20
11/4
11/4 - 111/2
39.7
1.56
42.9
1.69
-24
11/2
11/2 - 111/2
45.2
1.78
48.4
1.91
-32
2
2 - 111/2
57.2
2.25
60.3
2.38
Thread Identification Table SAE Straight Thread O-Ring Boss O-ring
SAE Straight Thread O-ring Boss Male
SAE Straight Thread O-ring Port
20
DASH SIZE (dash)
INCH SIZE (in)
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
-2
1/8
5/16
- 24
6.9
0.27
7.8
0.31
-3
3/16
3/8
- 24
8.5
0.34
9.4
0.37
-4
1/4
7/16
- 20
9.9
0.39
11.2
0.44
-5
5/16
1/2
- 20
11.5
0.45
12.6
0.49
-6
3/8
9/16
- 18
12.9
0.51
14.1
0.56
-8
1/2
3/4
- 16
17.5
0.69
18.9
0.74
-10
5/8
7/8
- 14
20.5
0.81
22.1
0.87
-12
3/4
11/16 - 12
24.9
0.98
26.9
1.06
-14
7/8
13/16 - 12
28.1
1.11
30.0
1.18
-16
1
15/16 - 12
31.3
1.23
33.1
1.31
-20
11/4
15/8 - 12
39.2
1.54
41.1
1.62
-24
11/2
17/8 - 12
45.6
1.79
47.4
1.87
-32
2
21/2 - 12
61.4
2.42
63.3
2.49
Coupling Identification Thread Identification Table JIC 37° Flare DASH SIZE (dash)
37°
JIC 37° Male
37° JIC 37° Female
INCH SIZE (in)
THREAD SIZE (in-TPI)
-2
1/8
5/16
-3
3/16
3/8
-4
1/4
7/16
-5
5/16
1/2
-6
3/8
9/16
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
- 24
6.9
0.27
7.8
0.31
- 24
8.5
0.34
9.4
0.37
- 20
9.9
0.39
11.2
0.44
- 20
11.5
0.45
12.6
0.49
- 18
12.9
0.51
14.1
0.56 0.74
-8
1/2
3/4
- 16
17.5
0.69
18.9
-10
5/8
7/8
- 14
20.5
0.81
22.1
0.87
-12
3/4
11/16 - 12
24.9
0.98
26.9
1.06
-14
7/8
13/16 - 12
28.1
1.11
30.0
1.18
-16
1
15/16 - 12
31.3
1.23
33.1
1.31
-20
11/4
15/8 - 12
39.2
1.54
41.1
1.62
-24
11/2
17/8 - 12
45.6
1.79
47.4
1.87
-32
2
21/2 - 12
61.4
2.42
63.3
2.49
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
Thread Identification Table SAE 45° Flare
SAE 45° Male
45° SAE 45° Female
INCH SIZE (in)
-2
1/8
5/16
-3
3/16
3/8
-4
1/4
7/16
-5
5/16
1/2
-6
3/8
5/8
-7
7/16
11/16
-8
1/2
3/4
- 16
-10
5/8
7/8
- 14
-12
3/4
-14 -16
MALE THREAD OUTSIDE DIAMETER (mm) (in)
- 24
6.9
0.27
7.9
- 24
8.6
0.34
9.6
0.38
- 20
9.9
0.39
11.2
0.44
- 20
11.4
0.45
12.7
0.50
- 18
14.2
0.56
15.7
0.62
15.7
0.62
17.3
0.68
17.0
0.68
19.0
0.75
- 16
Coupling Identification
DASH SIZE (dash)
45°
0.31
20.3
0.80
22.3
0.88
11/16 - 14
25.1
0.99
26.9
1.06
7/8
11/4 - 12
29.5
1.16
31.7
1.25
1
13/8 - 12
32.5
1.28
35.0
1.38
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
Thread Identification Table SAE Inverted 45° Flare DASH SIZE (dash) 45°* SAE Inverted Flare Male
45°
SAE Inverted Flare Female
INCH SIZE (in)
-2
1/8
-3
3/16
-4
1/4
-5
MALE THREAD OUTSIDE DIAMETER (mm) (in)
5/16
- 28
6.9
0.27
7.9
0.31
3/8
- 24
8.6
0.34
9.6
0.38
7/16
- 24
9.9
0.39
11.2
0.44
5/16
1/2
- 20
11.4
0.45
12.7
0.50
-6
3/8
5/8
- 18
14.2
0.56
15.7
0.62
-7
7/16
11/16
- 18
15.7
0.62
17.3
0.68
-8
1/2
3/4
- 18
17.0
0.68
19.0
0.75
-10
5/8
7/8
- 18
20.3
0.80
22.3
0.88
-12
3/4
11/16 - 16
25.1
0.99
26.9
1.06
* 42˚ Flare on male machined adapters
21
Coupling Identification Thread Identification Table SAE O-Ring Face Seal (ORFS) O-ring Groove
O-ring Face Seal Male
O-ring Face Seal Female
DASH SIZE (dash)
INCH SIZE (in)
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
-4
1/4
9/16
- 18
12.9
0.51
14.1
0.56
-6
3/8
11/16
- 16
15.9
0.63
17.3
0.68
-8
1/2
13/16
- 16
19.1
0.75
20.5
0.81
-10
5/8
1 - 14
23.6
0.93
25.2
0.99
-12
3/4
13/16 - 12
28.1
1.11
30.0
1.18
-16
1
17/16 - 12
34.4
1.36
36.3
1.43
-20
11/4
111/16 - 12
40.8
1.61
42.7
1.68
-24
11/2
2 - 12
48.7
1.92
50.6
1.99
Thread Identification Table DIN 24° Cone METRIC FEMALE THREAD MALE THREAD THREAD INSIDE DIAMETER OUTSIDE DIAMETER (dia x pitch) (mm) (in) (mm) (in)
Coupling Identification
24°
DIN 24° Male Cone
DIN Universal Female Spherical (24°/60°) Cone
Tube Outside Diameter DIN Female Metric Tube
O-ring DIN 24° Female Taper with O-ring
TUBE OUTSIDE DIAMETER LIGHT SERIES HEAVY SERIES (mm) (in) (mm) (in)
M12 x 1.5
10.5
0.41
12
0.47
6
0.24
*
*
M14 x 1.5
12.5
0.49
14
0.55
8
0.31
6
0.24
M16 x 1.5
14.5
0.57
16
0.63
10
0.39
8
0.31
M18 x 1.5
16.5
0.65
18
0.71
12
0.47
10
0.39
M20 x 1.5
18.5
0.73
20
0.79
*
*
12
0.47
M22 x 1.5
20.5
0.81
22
0.87
15
M24 x 1.5
22.5
0.89
24
0.94
*
M26 x 1.5
24.5
0.96
26
1.02
18
0.71
*
M30 x 2.0
27.9
1.10
30
1.18
22
0.87
20
M36 x 2.0
33.9
1.33
36
1.42
28
1.10
25
0.98
M42 x 2.0
39.9
1.57
42
1.65
*
*
30
1.18
M45 x 2.0
42.9
1.69
45
1.77
35
1.38
*
M52 x 2.0
49.9
1.96
52
2.05
42
1.65
38
0.59
14
0.55
*
16
0.63 * 0.79
* 1.50
*No DIN 24° Cone in this size
Thread Identification Table DIN 60° Cone 60° DIN 60° Male Cone
DIN Universal Female Spherical (24°/60°) Seat
22
METRIC THREAD (dia x pitch)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
TUBE OUTSIDE DIAMETER 60° CONE (mm) (in)
M12 x 1.5
10.5
0.41
12
0.47
6
0.24
M14 x 1.5
12.5
0.49
14
0.55
8
0.31
M16 x 1.5
14.5
0.57
16
0.63
10
0.39
M18 x 1.5
16.5
0.65
18
0.71
12
0.47
M22 x 1.5
20.5
0.81
22
0.87
15
0.59
M26 x 1.5
24.5
0.96
26
1.02
18
0.71
M30 x 1.5
28.5
1.12
30
1.18
22
0.87
M38 x 1.5
36.5
1.44
38
1.50
28
1.10
M45 x 1.5
43.5
1.71
45
1.77
35
1.38
M52 x 1.5
50.5
1.99
52
2.05
42
1.65
Coupling Identification Thread Identification Table JIS Tapered Pipe, 30° Flare Parallel Pipe, and 30° Male Inverted Seat
Japanese Tapered Pipe Thread Male
Japanese Tapered Pipe Thread Port
30°
30° Japanese 30° Flare Parallel Threads Male
Japanese 30° Flare Parallel Threads Female
DASH SIZE (dash)
INCH SIZE (in)
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
-2
1/8
1/8
- 28
8.7
0.34
9.5
0.38
-4
1/4
1/4
- 19
11.9
0.47
13.5
0.53
-6
3/8
3/8
- 19
15.1
0.59
16.7
0.66
-8
1/2
1/2
- 14
19.1
0.75
20.6
0.81
-10
5/8
5/8
- 14
20.6
0.81
23.1
0.91
-12
3/4
3/4
- 14
23.8
0.94
26.2
1.03
-16
1
1 - 11
30.2
1.19
33.3
1.31
-20
11/4
11/4 - 11
38.9
1.53
42.1
1.66
-24
11/2
11/2 - 11
45.2
1.78
47.6
1.88
-32
2
2 - 11
56.4
2.22
59.5
2.34
DASH SIZE (dash)
55° Thread Angle
30° BSPT Male
BSPT Port
55˚ Thread Angle
55˚ Thread Angle
60˚ Seat
60˚ Seat BSPP Male
JIS 60˚ Male Cone
INCH SIZE (in)
THREAD SIZE (in-TPI)
FEMALE THREAD INSIDE DIAMETER (mm) (in)
Coupling Identification
Thread Identification Table British Standard Pipe Tapered (BSPT), British Standard Pipe Parallel Spherical Seat (BSPP) and JIS 60° Cone MALE THREAD OUTSIDE DIAMETER (mm) (in)
-2
1/8
1/8
- 28
8.7
0.34
9.5
0.38
-4
1/4
1/4
- 19
11.1
0.44
13.5
0.53
-6
3/8
3/8
- 19
15.1
0.59
16.7
0.66
-8
1/2
1/2
- 14
18.3
0.72
20.6
0.81
-10
5/8
5/8
- 14
20.6
0.81
23.0
0.91
-12
3/4
3/4
- 14
23.8
0.94
26.2
1.03
-16
1
1 - 11
30.2
1.19
33.3
1.31
-20
11/4
11/4 - 11
38.9
1.53
42.1
1.66
-24
11/2
11/2 - 11
45.2
1.78
47.6
1.88
-32
2
2 - 11
56.4
2.22
59.5
2.34
BSPP Spherical Seat and JIS 60˚ Cone Female
Thread Identification Table Gaz (gas series) 24° Cone METRIC THREAD (dia x pitch)
24°
GAZ 24° Male
GAZ 24° Female
Tube Outside Diameter GAZ Female Tube
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
TUBE OUTSIDE DIAMETER 24° CONE (mm) (in)
M20 x 1.5
18.5
0.73
20.0
0.78
13.25
0.52
M24 x 1.5
22.5
0.89
24.0
0.94
16.75
0.66
M30 x 1.5
28.5
1.12
30.0
1.18
21.25
0.83
M36 x 1.5
34.5
1.36
36.0
1.41
26.75
1.05
M45 x 1.5
43.5
1.71
45.0
1.77
33.50
1.32
M52 x 1.5
50.5
1.99
52.0
2.04
42.25
1.66
23
Coupling Identification Thread Identification Table French Metric METRIC THREAD (dia x pitch)
24°
French Millimetric Male
French Millimetric Female
Tube Outside Diameter
Coupling Identification
French Millimetric Female Tube
FEMALE THREAD INSIDE DIAMETER (mm) (in)
MALE THREAD OUTSIDE DIAMETER (mm) (in)
(mm)
(in)
6
0.24
0.55
8
0.31
0.63
10
0.39
18.0
0.71
12
0.47
0.73
20.0
0.79
14
0.55
0.81
22.0
0.87
15
0.59
22.5
0.89
24.0
0.94
16
0.63
M27 x 1.5
25.5
1.00
27.0
1.06
18
0.71
M30 x 1.5
28.5
1.12
30.0
1.18
22
0.87
M33 x 1.5
31.5
1.24
33.0
1.30
25
0.98
M36 x 1.5
34.5
1.36
36.0
1.42
28
1.10
M39 x 1.5
37.5
1.48
39.0
1.54
30
1.18
M42 x 1.5
40.5
1.59
42.0
1.65
32
1.26
M45 x 1.5
43.5
1.71
45.0
1.77
35
1.38
M48 x 1.5
46.5
1.83
48.0
1.89
38
1.50
M52 x 1.5
50.5
1.99
52.0
2.05
40
1.57
M54 x 2.0
51.9
2.04
54.0
2.13
45
1.77
M12 x 1.0
11.0
0.43
12.0
0.47
M14 x 1.5
12.5
0.49
14.0
M16 x 1.5
14.5
0.57
16.0
M18 x 1.5
16.5
0.65
M20 x 1.5
18.5
M22 x 1.5
20.5
M24 x 1.5
JIS Metric 30˚ Flare (Komatsu Style) METRIC THREAD 30°
30° JIS Metric 30° Flare Male
24
JIS Metric 30° Flare Female
TUBE OUTSIDE DIAMETER
FEMALE THREAD INSIDE DIAMETER
MALE THREAD OUTSIDE DIAMETER
(dia x pitch)
(mm)
(in)
(mm)
(in)
M18 x 1.5
16.5
0.65
18.0
0.71
M22 x 1.5
20.5
0.81
22.0
0.87
M24 x 1.5
22.5
0.89
24.0
0.94
M30 x 1.5
28.5
1.12
30.0
1.18
M33 x 1.5
31.5
1.24
33.0
1.30
M36 x 1.5
34.5
1.36
36.0
1.42
M42 x 1.5
40.5
1.59
42.0
1.65
Caterpillar High Pressure Hose Products
Caterpillar High Pressure Hose Products
XT™ ES Hose...................................................................................................................... 27 XT-6™ ES Hose (2836/4136) and Couplings...................................................................... 29 XT-6™ ES Hose (2836/4136)...........................................................................................30 XT-6™ ES Hose Reusable Couplings.............................................................................. 32 NPTF.............................................................................................................................32 SAE Code 61 Flange.................................................................................................... 32 Caterpillar Flange..........................................................................................................32 ORFS............................................................................................................................ 35 Double Collet................................................................................................................ 35 BSPP............................................................................................................................ 36 Sleeves......................................................................................................................... 36 XT-6™ ES Hose Permanent Couplings........................................................................... 37 NPTF.............................................................................................................................37 SAE Code 61 Flange.................................................................................................... 37 Caterpillar Flange..........................................................................................................37 ORFS............................................................................................................................ 39 Double Collet................................................................................................................ 40 XT-5™ ES Hose (1036/4199) and Couplings...................................................................... 43 XT-5™ ES Hose (1036/4199)...........................................................................................44 XT-5™ ES Hose Reusable Couplings.............................................................................. 46 NPTF.............................................................................................................................46 SAE Code 61 Flange.................................................................................................... 46 SAE Code 62 Flange.................................................................................................... 47 Caterpillar Flange..........................................................................................................48 ORFS............................................................................................................................ 50 Braze-On.......................................................................................................................51 Double Collet................................................................................................................ 51 BSPP............................................................................................................................ 52 Sleeves......................................................................................................................... 52 XT-5™ ES Hose Permanent Couplings........................................................................... 53 JIC 37°.......................................................................................................................... 53 SAE Code 61 Flange.................................................................................................... 53 SAE Code 62 Flange.................................................................................................... 54 Caterpillar Flange..........................................................................................................54 ORFS............................................................................................................................ 55 XT-3™ ES Hose (736/4135) and Couplings........................................................................ 57 XT-3™ ES Hose (736/4135).............................................................................................58 XT-3™ ES Hose Reusable Couplings.............................................................................. 60 NPTF.............................................................................................................................60 STOR............................................................................................................................ 60 JIC 37°.......................................................................................................................... 60 SAE Code 61 Flange.................................................................................................... 62 Caterpillar Flange..........................................................................................................68 Komatsu Style Flange................................................................................................... 68 ORFS............................................................................................................................ 69 Braze-On.......................................................................................................................70
25
Caterpillar High Pressure Hose Products
Caterpillar High Pressure Hose Products
Double Collet................................................................................................................ 70 BSPP............................................................................................................................ 71 Sleeves......................................................................................................................... 72 XT-3™ ES Hose Permanent Couplings........................................................................... 73 NPTF.............................................................................................................................73 STOR............................................................................................................................ 73 JIC 37°.......................................................................................................................... 73 SAE Code 61 Flange.................................................................................................... 75 SAE Code 62 Flange.................................................................................................... 78 Caterpillar Flange..........................................................................................................79 Komatsu Style Flange................................................................................................... 79 ORFS............................................................................................................................ 80 Double Collet................................................................................................................ 82 DIN 20078..................................................................................................................... 83 JIS - BSPP.................................................................................................................... 83 XT-3™ ES Hose Captive Flange Couplings..................................................................... 86 DIN Four-Wire Spiral Hose (1956) and Couplings............................................................... 89 DIN Four-Wire Spiral Hose (1956)................................................................................... 90 Permanent Couplings (1956)............................................................................................91 NPTF.............................................................................................................................91 JIC 37°.......................................................................................................................... 91 SAE Code 61 Flange.................................................................................................... 92 SAE Code 62 Flange.................................................................................................... 94 Komatsu Style Flange................................................................................................... 96 ORFS............................................................................................................................ 96 DIN 20078..................................................................................................................... 97 JIS - BSPP.................................................................................................................... 99
26
XT™ ES Hose Caterpillar designs and manufactures several hoses for high pressure hydraulic applications. These range from 2500 to 6000 psi (17,500 to 42,000 kPa). In the 6000 psi (42,000 kPa) range, Caterpillar offers three hoses: XT-3 ES, XT-5 ES, and XT-6 ES. ST-ES exceeds SAE100R 12, 13, and 15 standards. The XT ES (ES stands for Enhanced Spiral) is our “extra tough” hose. Not only is this hose impulse tested to 1 million cycles – twice the industry requirement, it features a unique cover that resists abrasion up to 20 times better than other standard rubber covered hoses.
Enhanced Spiral = Extra Toughness! Plus, Cat’s XT ES hoses are designed to work at half the SAE bend radius. This means they fit better in tight places and substantially reduce hose length requirements. SAE Caterpillar High Pressure Hose Products
Cat
27
Caterpillar High Pressure Hose Products
XT™ ES Hose
28
XT-6™ ES Hose (2836/4136) and Couplings XT-6™ ES Hose (2836/4136).............................................................................................. 30 XT-6™ ES Hose Reusable Couplings................................................................................. 32 NPTF................................................................................................................................ 32 SAE Code 61 Flange........................................................................................................ 32 Caterpillar Flange............................................................................................................. 32 ORFS................................................................................................................................35 Double Collet.................................................................................................................... 35 BSPP................................................................................................................................ 36 Sleeves............................................................................................................................. 36 XT-6™ ES Hose Permanent Couplings............................................................................... 37 NPTF................................................................................................................................ 37 SAE Code 61 Flange........................................................................................................ 37 Caterpillar Flange............................................................................................................. 37 ORFS................................................................................................................................39 Double Collet.................................................................................................................... 40
Caterpillar High Pressure Hose Products
29
XT-6™ ES Hose (2836/4136) CATERPILLAR ® XT-6 ES
XT-6 ES Hose (2836) Exceeds the requirement of SAE 100R15. Note: Sold by the inch. PART NUMBER
HOSE I.D. (in) (mm)
161-1833
0.375
9.5
161-1834
0.500
171-2532
0.625
161-1835
HOSE DASH SIZE
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
-6
0.78
19.7
24,000
165,475
6000
41,370
2.99
76
12.7
-8
0.92
23.3
24,000
165,475
6000
41,370
4.02
102
15.9
-10
1.07
27.3
2408
16,600
6019
41,500
4.49
114
0.750
19.1
-12
1.20
30.5
24,000
165,475
6000
41,370
5.24
133
161-1836
1.000
25.4
-16
1.52
38.7
24,000
165,475
6000
41,370
6.50
165
161-1837
1.250
31.8
-20
1.97
50.0
24,000
165,475
6000
41,370
8.74
222
161-1838
1.500
38.1
-24
2.29
58.1
24,000
165,475
6000
41,370
10.51
267
222-4844
2.000
50.8
-32
2.80
71.1
24,000
165,475
6000
41,370
25.98
660
Construction: Fabric reinforced, synthetic rubber tube; four or six plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Extremely high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C). Couplings: Collet-type reusable, skive type, see XT-6 ES Hose Reusable Couplings section. Crimp-on permanent, skive type, see XT-6 ES Hose Permanent Couplings section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings. 1 Centerline of Hose
CATERPILLAR ® XT-6 ES
XT-6 ES ToughGuard (4136) Exceeds the requirement of SAE 100R15. Note: Sold by the inch. PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
238-8343
0.375
9.5
-6
0.78
19.7
24,000
165,475
6000
41,370
2.99
76
238-8344
0.500
12.7
-8
0.92
23.3
24,000
165,475
6000
41,370
4.02
102
238-8346
0.750
19.1
-12
1.20
30.5
24,000
165,475
6000
41,370
5.24
133
238-8347
1.000
25.4
-16
1.52
38.7
24,000
165,475
6000
41,370
6.50
165
245-1412
1.250
31.8
-20
1.97
50.0
24,000
165,475
6000
41,370
8.74
222
245-1413
1.500
38.1
-24
2.29
58.1
24,000
165,475
6000
41,370
10.51
267
Caterpillar High Pressure Hose Products
Construction: Fabric reinforced, synthetic rubber tube; four or six plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Extremely high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C). Couplings: Collet-type reusable, skive type, see XT-6 ES Hose Reusable Couplings section. Crimp-on permanent, skive type, see XT-6 ES Hose Permanent Couplings section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings. 1 Centerline of Hose
30
XT-6™ ES Hose (2836/4136) XT-6 ES Hose Features and Benefits: • 1/2 SAE 100R15 Minimum Bend Radius. • Superior Abrasion Resistance Cover. • Aged Impulse Tested to 1 Million Cycles (2 X Industry Standards). • Mylar layline for easy identification.
XT Hose Coupling Features and Benefits: XT-6 ES Hose Couplings have the same advantages found with the XT-5 ES and XT-3 ES Hose Couplings, plus a heavier stem and head construction to handle 6000 psi (42,000 kPa) applications. EXCLUSIVE REUSABLE DESIGN Reuse XT Couplings over and over again for the lowest operating cost. In addition, you know you have the right coupling at the right time. (A) Slim, Collet-Type Style • No bolts or protrusions for easy installation, even in cramped places. (B) Multi-land Fingers • Grip the wires on the skived hose solidly to prevent coupling blow-off and provide better coupling retention.
warning!
TO AVOID SERIOUS PERSONAL INJURY TO THE OPERATOR AND EXTENSIVE DAMAGE TO THE EQUIPMENT, THE FOLLOWING PROCEDURES MUST BE OBSERVED. FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY.
1 2
(C) Tapered Fingers & Stem • Compressive force is slightly relieved so the hose can flex without failure at the rear of the coupling. This increases hose assembly life. (D) Multi-land Stem • Keeps fluid sealed in without inner liner damage and provides a positive coupling to hose seal. (E) Hardened Steel Sleeve • No sleeve bend or distortion so the sleeve retains its original size and shape and can be reused. • Hose stays firmly compressed in coupling, further aiding coupling retention. (F) Precision Machined O-Ring Head • To help eliminate hazardous fluid leaks and provide positive coupling head seal. (G) Extruded Stem • Orients metal grain for more uniform strength and fatigue resistance. • Braze joint between head and stem is eliminated resulting in leak free performance and excellent coupling assembly life. (H) Extruded Collet • More uniform strength for excellent coupling performance after repeated reuse.
ALWAYS match hose, stem assemblies and sleeves according to markings ( / + / UHP / ∞). NEVER interchange XT-3 ES hose, stem assemblies and sleeves marked with a triangle ( ) with XT-5 ES hose, stem assemblies and sleeves marked with a plus (+), XT-6 hose, stem assemblies and sleeves marked with (UHP) or XT-6 ES hose, stem assemblies and sleeves marked with an infinity sign (∞).
XT-3 ES HOSE
∞
XT-5 ES HOSE
∞
∞
XT-6 ES HOSE
Caterpillar High Pressure Hose Products
31
XT-6™ ES Hose Reusable Couplings NPTF Male B C PART NUMBER
153-0864
HOSE I.D. (in) (mm)
1.000
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-16
1 1/4 - 11 1/2
-16
25.4
B LENGTH (in) (mm)
4.92
125
C CUT-OFF FACTOR (in) (mm)
2.48
63
A
B
SAE Code 61 Flange - 90° Elbow
C
PART NUMBER D
153-0822
HOSE I.D. (in) (mm)
0.750 19.1
HOSE DASH SIZE
-12
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
1.50
38.1
B LENGTH (in) (mm)
-12
4.65
118
C CUT-OFF FACTOR (in) (mm)
2.40
61
D DROP O-RING (in) (mm) SEAL
2.09
53 4J-5267
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
Caterpillar Flange B C
PART NUMBER
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
153-0794
0.750 19.1
-12
1.63
41.3
-12
5.55
141
3.31
84 1P-3702
153-0808
0.750 19.1
-12
1.87
47.6
-12
5.55
141
3.31
84 1P-3703
153-0835
1.000 25.4
-16
1.87
47.6
-16
6.02
153
3.58
91 1P-3703
153-0851
1.000 25.4
-16
2.13
54.0
-16
6.02
153
3.58
91 1P-3704
243-1929
1.250 31.8
-20
2.13
54.0
-20
5.35
136
2.36
60 1P-3704
153-0873
1.250 31.8
-20
2.13
54.0
-20
6.22
158
3.44
88 1P-3704
153-0882
1.250 31.8
-20
2.50
63.5
-24
6.22
158
3.44
88 1P-3705
211-2652
1.500 38.1
-24
2.50
63.5
-24
6.85
174
3.31
84 1P-3705
211-2653
1.500 38.1
-24
2.50
63.5
-24
9.06
230
5.49
140 1P-3705
256-0198
2.000 50.8
-32
2.50
63.5
-24
13.43
341
9.02
229 1P-3709
268-5969
2.000 50.8
-32
3.13
79.4
-32
9.53
242
5.12
130 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 22 1/2° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
153-0795
0.750 19.1
-12
1.63
41.3
-12
5.47
139
3.23
82
0.63
16 1P-3702
153-0809
0.750 19.1
-12
1.87
47.6
-16
5.47
139
3.23
82
0.63
16 1P-3703
153-0837
1.000 25.4
-16
1.87
47.6
-16
5.98
152
3.50
89
0.67
17 1P-3703
153-0852
1.000 25.4
-16
2.13
54.0
-20
5.94
151
3.50
89
0.63
16 1P-3704
153-0874
1.250 31.8
-20
2.13
54.0
-20
6.18
157
3.39
86
0.67
17 1P-3704
153-0883
1.250 31.8
-20
2.50
63.5
-24
6.18
157
3.39
86
0.67
17 1P-3705
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
32
D DROP D-RING (in) (mm) SEAL
XT-6™ ES Hose Reusable Couplings Caterpillar Flange - 30° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0797
0.750 19.1
-12
1.63
41.3
-12
5.35
136
3.15
80
0.87
22 1P-3702
153-0811
0.750 19.1
-12
1.87
47.6
-16
5.35
136
3.15
80
0.87
22 1P-3703
243-1914
1.000 25.4
-16
1.87
47.6
-19
6.30
160
3.86
98
1.26
32 1P-3703
153-0853
1.000 25.4
-16
2.13
54.0
-20
5.87
149
3.43
87
0.91
23 1P-3704
153-0875
1.250 31.8
-20
2.13
54.0
-20
6.77
172
3.98
101
1.04
27 1P-3704
153-0884
1.250 31.8
-20
2.50
63.5
-24
7.76
197
4.98
127
1.04
27 1P-3705
211-2654
1.500 38.1
-24
2.50
63.5
-24
8.86
225
5.31
135
1.04
27 1P-3705
268-5970
2.000 50.8
-32
3.13
79.4
-32
13.46
342
9.06
230
1.81
46 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 45° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0799
0.750 19.1
-12
1.63
41.3
-12
5.35
136
2.87
73
1.34
34 1P-3702
153-0813
0.750 19.1
-12
1.87
47.6
-16
5.12
130
2.87
73
1.34
34 1P-3703
153-0842
1.000 25.4
-16
1.87
47.6
-16
5.59
142
3.15
80
1.46
37 1P-3703
243-1916
1.000 25.4
-16
1.87
47.6
-16
6.06
154
3.62
92
1.57
40 1P-3703
153-0855
1.000 25.4
-16
2.13
54.0
-20
5.59
142
3.15
80
1.46
37 1P-3704
243-1915
1.000 25.4
-16
2.13
54.0
-20
6.06
154
3.62
92
1.57
40 1P-3704
153-0876
1.250 31.8
-20
2.13
54.0
-20
7.40
188
4.63
118
1.69
43 1P-3704
153-0885
1.250 31.8
-20
2.50
63.5
-24
7.40
188
4.63
118
1.69
43 1P-3705
211-2655
1.500 38.1
-24
2.50
63.5
-24
8.62
219
5.06
129
1.61
41 1P-3705
211-2656
1.500 38.1
-24
3.13
79.4
-32
9.02
229
5.47
139
1.81
46 1P-3709
268-5971
2.000 50.8
-32
3.13
79.4
-32
12.95
329
8.54
217
2.83
72 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0801
0.750 19.1
-12
1.63
41.3
-12
4.72
120
2.48
63
1.81
46 1P-3702
153-0815
0.750 19.1
-12
1.87
47.6
-16
4.72
120
2.48
63
1.81
46 1P-3703
153-0844
1.000 25.4
-16
1.87
47.6
-16
5.71
145
3.27
83
1.97
50 1P-3703
243-1917
1.000 25.4
-16
1.87
47.6
-16
6.57
167
4.13
105
2.17
55 1P-3703
153-0856
1.000 25.4
-16
2.13
54.0
-20
5.71
145
3.27
83
1.97
50 1P-3704
243-1918
1.000 25.4
-16
2.13
54.0
-20
6.57
167
4.13
105
2.17
55 1P-3704
153-0877
1.250 31.8
-20
2.13
54.0
-20
8.50
216
5.71
145
2.36
60 1P-3704
211-2657
1.500 38.1
-24
2.50
63.5
-24
8.15
207
4.61
117
2.15
55 1P-3705
268-5972
1.969 50.4
-32
3.13
79.4
-32
12.17
309
7.76
197
3.90
99 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
33
Caterpillar High Pressure Hose Products
Caterpillar Flange - 60° Elbow B
XT-6™ ES Hose Reusable Couplings Caterpillar Flange - 67 1/2° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0802
0.750 19.1
-12
1.63
41.3
-12
5.59
142
3.35
85
2.05
52 1P-3702
153-0816
0.750 19.1
-12
1.87
47.6
-16
6.65
169
2.24
57
2.09
53 1P-3703
153-0845
1.000 25.4
-16
1.87
47.6
5.47
139
3.03
77
2.20
56 1P-3703
153-0857
1.000 25.4
-16
2.13
54.0
-20
5.47
139
3.03
77
2.20
56 1P-3704
153-0878
1.250 31.8
-20
2.13
54.0
-20
6.26
159
3.46
88
2.36
60 1P-3704
153-0887
1.250 31.8
-20
2.50
63.5
-24
6.22
158
3.42
87
2.36
60 1P-3705
153-0886
1.250 31.8
-20
2.50
63.5
-24
8.70
221
5.91
150
2.36
60 1P-3705
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
Caterpillar Flange - 80° Elbow
C
PART NUMBER D
257-9353
HOSE I.D. (in) (mm)
2.000 50.8
HOSE DASH SIZE
-32
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
3.13
79.4
-32
B LENGTH (in) (mm)
10.83
275
C CUT-OFF FACTOR (in) (mm)
6.42
163
D DROP D-RING (in) (mm) SEAL
5.31
135 1P-3709
NOTE: Refer to Seal Section of this Guide for a complete list of seals and applications. A
B
Caterpillar Flange - 90° Elbow
C
PART NUMBER D
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
153-0804
0.750 19.1
-12
1.63
41.3
-12
4.69
119
2.44
62
2.64
67 1P-3702
243-1928
0.750 19.1
-12
1.63
41.3
-12
4.80
122
2.56
65
5.08
129 1P-3702
153-0806
0.750 19.1
-12
1.63
41.3
-12
5.00
127
2.76
70
4.72
120 1P-3702
153-0818
0.750 19.1
-12
1.87
47.6
-12
4.69
119
2.44
62
2.64
67 1P-3703
153-0820
0.750 19.1
-12
1.87
47.6
-12
4.69
119
2.44
62
5.04
128 1P-3703
243-1920
1.000 25.4
-16
1.87
47.6
-16
5.24
133
2.80
71
5.91
150 1P-3703
153-0847
1.000 25.4
-16
1.87
47.6
-16
5.47
139
3.03
77
2.91
74 1P-3703
153-0849
1.000 25.4
-16
1.87
47.6
-16
5.47
139
3.03
77
5.20
132 1P-3703
243-1931
1.000 25.4
-16
1.87
47.6
-16
5.51
140
3.03
77
3.27
83 1P-3703
153-0859
1.000 25.4
-16
2.13
54.0
-16
5.47
139
3.03
77
2.91
74 1P-3704
153-0860
1.000 25.4
-16
2.13
54.0
-16
5.47
139
3.03
77
5.91
150 1P-3704
243-1930
1.000 25.4
-16
2.13
54.0
-16
5.51
140
3.03
77
3.27
83 1P-3704
153-0881
1.250 31.8
-20
2.13
54.0
-20
6.50
165
3.71
94
5.91
150 1P-3704
153-0880
1.250 31.8
-20
2.13
54.0
-20
6.97
177
4.17
106
3.63
92 1P-3704
153-0879
1.250 31.8
-20
2.13
54.0
-20
7.44
189
4.65
118
3.23
82 1P-3704
243-1925
1.250 31.8
-20
2.13
54.0
-20
7.64
194
4.65
118
3.39
86 1P-3704
153-0889
1.250 31.8
-20
2.50
63.5
-24
6.50
165
3.71
94
5.31
135 1P-3705
153-0888
1.250 31.8
-20
2.50
63.5
-24
7.40
188
4.61
117
3.23
82 1P-3705
211-2658
1.500 38.1
-24
2.50
63.5
-24
7.13
181
3.44
88
3.41
87 1P-3705
213-8720
1.500 38.1
-24
2.50
63.5
-24
7.32
186
3.62
92
4.17
106 1P-3705
268-5973
2.000 50.8
-32
3.13
79.4
-32
9.80
249
5.39
137
5.79
147 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
34
D DROP D-RING (in) (mm) SEAL
XT-6™ ES Hose Reusable Couplings ORFS Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
153-0826
0.750
19.1
-12
1 3/16 - 12
-12
3.90
99
1.65
42 6V-9746
153-0866
1.000
25.4
-16
1 7/16 - 12
-16
4.21
107
1.77
45 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
153-0829
0.750
19.1
-12
1 3/16 - 12
-12
4.80
122
2.56
65
1.02
26 6V-9746
153-0868
1.000
25.4
-16
1 7/16 - 12
-16
5.79
147
3.35
85
1.26
32 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
ORFS Female Swivel - 90° Elbow PART NUMBER
D
153-0831
A
HOSE I.D. (in) (mm)
0.750
19.1
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-12
1 3/16 - 12
-12
4.61
117
2.36
60
2.17
55 6V-9746 109 6V-9746
3/16
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
153-0833
0.750
19.1
-12
1
- 12
-12
4.61
117
2.36
60
4.29
153-0870
1.000
25.4
-16
1 7/16 - 12
-16
5.51
140
3.07
78
2.68
68 5K-9090
153-0872
1.000
25.4
-16
1 7/16 - 12
-16
5.51
140
3.07
78
5.04
128 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar High Pressure Hose Products
Double Collet B C PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
211-8738
0.750
19.1
-12
9.29
236
4.49
114
153-0861
1.000
25.4
-16
6.97
177
2.09
53
153-0890
1.250
31.8
-20
7.44
189
4.65
118
35
XT-6™ ES Hose Reusable Couplings C
B
Double Collet - 90° Elbow PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
153-0824
0.750
19.1
-12
4.96
126
2.76
70
4.96
126
243-1923
0.750
19.1
-12
5.12
130
2.87
73
5.12
130
153-0862
1.000
25.4
-16
5.28
134
2.83
72
5.28
134
243-1919
1.000
25.4
-16
5.91
150
3.46
88
5.91
150
153-0891
1.250
31.8
-20
6.34
161
3.56
90
6.42
163
218-4673
1.500
38.1
-24
7.32
186
3.65
93
7.31
186
BSPP Spherical Seat - Female Swivel B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
1.000
25.4
-16
1 1/4 - 11
-20
5.28
134
2.80
71
153-0892
1.250
31.8
-20
1 1/4 - 11
-20
6.30
160
3.31
84
PART NUMBER
Caterpillar High Pressure Hose Products
C CUT-OFF FACTOR (in) (mm)
153-0863
XT-6 ES Sleeves
36
B LENGTH (in) (mm)
HOSE I.D. (in) (mm)
HOSE DASH SIZE
230-9992
0.750
19.1
-12
230-9999
1.000
25.4
-16
153-0895
1.250
31.8
-20
211-2659
1.500
38.1
-24
222-9073
2.000
50.8
-32
XT-6™ ES Hose Permanent Couplings B C
THREAD
NPTF Male PART NUMBER
A
HEX
B
233-6301
HOSE I.D. (in) (mm)
1.000
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-16
1 - 11 1/2
-16
25.4
B LENGTH (in) (mm)
4.96
126
C CUT-OFF FACTOR (in) (mm)
2.48
63
SAE Code 61 Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
153-0821
0.750 19.1
-12
1.50
38.1
-12
4.65
118
2.40
61
2.11
54 4J-5267
250-6590
1.000 25.4
-16
2.00
50.8
-16
4.72
120
2.76
70
2.40
61 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
261-2213
0.500 12.7
-8
1.63
41.3
-12
3.58
91
1.65
42 1P-3702
153-0793
0.750 19.1
-12
1.63
41.3
-12
5.43
138
3.31
84 1P-3702
153-0807
0.750 19.1
-12
1.87
47.6
-16
5.43
138
3.31
84 1P-3703
153-0834
1.000 25.4
-16
1.87
47.6
-16
5.91
150
3.57
91 1P-3703
153-0850
1.000 25.4
-16
2.13
54.0
-20
5.91
150
3.57
91 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
233-4815
0.750 19.1
-12
1.63
41.3
-12
5.47
139
3.23
82
0.63
16 1P-3702
233-4820
0.750 19.1
-12
1.87
47.6
-16
5.47
139
3.23
82
0.63
16 1P-3703
153-0836
1.000 25.4
-16
1.87
47.6
-16
5.83
148
3.50
89
0.67
17 1P-3703
233-6542
1.000 25.4
-16
2.13
54.0
-20
5.94
151
3.50
89
0.67
17 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
37
Caterpillar High Pressure Hose Products
Caterpillar Flange - 22 1/2° Elbow
XT-6™ ES Hose Permanent Couplings Caterpillar Flange - 30° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0796
0.750 19.1
-12
1.63
41.3
-12
5.24
133
3.15
80
0.87
22 1P-3702
153-0810
0.750 19.1
-12
1.87
47.6
-16
5.24
133
3.15
80
0.87
22 1P-3703
153-0838
1.000 25.4
-16
1.87
47.6
-16
5.75
146
3.41
87
0.91
23 1P-3703
233-6544
1.000 25.4
-16
2.13
54.0
-20
5.87
149
3.43
87
0.91
23 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 45° Elbow B C
PART NUMBER
D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0798
0.750 19.1
-12
1.63
41.3
-12
5.00
127
2.88
73
1.36
35 1P-3702
153-0812
0.750 19.1
-12
1.87
47.6
-16
5.00
127
2.88
73
1.36
35 1P-3703
153-0841
1.000 25.4
-16
1.87
47.6
-16
5.47
139
3.13
80
1.46
37 1P-3703
153-0854
1.000 25.4
-16
2.13
54.0
-20
5.47
139
3.13
80
1.46
37 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 60° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
153-0800
0.750 19.1
-12
1.63
41.3
-12
4.61
117
2.49
63
1.83
47 1P-3702
153-0814
0.750 19.1
-12
1.87
47.6
-16
4.61
117
2.49
63
1.83
47 1P-3703
153-0843
1.000 25.4
-16
1.87
47.6
-16
5.63
143
3.28
83
1.97
50 1P-3703
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 67 1/2° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
233-4822
0.750 19.1
-12
1.63
41.3
-12
5.59
142
3.35
85
2.09
53 1P-3702
233-4824
0.750 19.1
-12
1.87
47.6
-16
5.71
145
3.46
88
2.09
53 1P-3703
233-6545
1.000 25.4
-16
1.87
47.6
-16
5.47
139
3.03
77
2.24
57 1P-3703
233-6546
1.000 25.4
-16
2.13
54.0
-20
5.47
139
3.03
77
2.24
57 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
38
D DROP D-RING (in) (mm) SEAL
XT-6™ ES Hose Permanent Couplings B
Caterpillar Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP D-RING (in) (mm) SEAL
261-2214
0.500 12.7
-8
1.63
41.3
-12
3.78
96
1.81
46
1.61
41 1P-3702
251-2185
0.625 15.9
-10
1.63
41.3
-12
5.71
145
2.20
56
1.97
50 1P-3702
153-0803
0.750 19.1
-12
1.63
41.3
-12
4.57
116
2.45
62
2.66
68 1P-3702
243-1926
0.750 19.1
-12
1.63
41.3
4.80
122
2.56
65
5.08
129 1P-3702
153-0805
0.750 19.1
-12
1.63
41.3
-12
5.04
128
2.79
71
4.72
120 1P-3702
153-0817
0.750 19.1
-12
1.87
47.6
-16
4.57
116
2.45
62
2.66
68 1P-3703
153-0819
0.750 19.1
-12
1.87
47.6
-16
4.69
119
2.45
62
5.08
129 1P-3703
153-0846
1.000 25.4
-16
1.87
47.6
-16
5.39
137
3.05
77
2.91
74 1P-3703
153-0848
1.000 25.4
-16
1.87
47.6
-16
5.51
140
3.05
77
5.20
132 1P-3703
153-0858
1.000 25.4
-16
2.13
54.0
-20
5.39
137
3.05
77
2.91
74 1P-3704
233-6547
1.000 25.4
-16
2.13
54.0
-20
5.51
140
3.06
78
5.91
150 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
153-0785
0.375
9.5
-6
11/16
- 16
-6
3.15
80
1.48
38 6V-8397
153-0789
0.500
12.7
-8
13/16
- 16
-8
3.35
85
1.48
38 6V-8398
196-9817
0.625
15.9
-10
1 - 14
-10
3.90
99
1.73
44 7J-9108
153-0825
0.750
19.1
-12
1 3/16 - 12
-12
3.78
96
1.66
42 6V-9746
153-0865
1.000
25.4
-16
1 7/16 - 12
-16
4.13
105
1.79
45 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 15° Elbow B C
153-0827 A
0.750
19.1
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-12
1 3/16 - 12
-12
B LENGTH (in) (mm)
5.08
129
C CUT-OFF FACTOR (in) (mm)
2.83
72
D DROP O-RING (in) (mm) SEAL
0.30
8 6V-9746
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
39
Caterpillar High Pressure Hose Products
D
PART NUMBER
HOSE I.D. (in) (mm)
XT-6™ ES Hose Permanent Couplings ORFS Female Swivel - 30° Elbow B C
PART NUMBER D
209-0485
HOSE I.D. (in) (mm)
0.750
19.1
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-12
1 3/16 - 12
-12
B LENGTH (in) (mm)
4.88
124
C CUT-OFF FACTOR (in) (mm)
2.83
72
D DROP O-RING (in) (mm) SEAL
1.01
26 6V-9746
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
A
ORFS Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
153-0786
0.375
9.5
-6
11/16
- 16
-6
4.06
103
2.35
60
0.69
18 6V-8397
153-0790
0.500
12.7
-8
13/16
- 16
-8
4.57
116
2.70
69
0.85
22 6V-8398
196-9818
0.625
15.9
-10
1 - 14
-10
4.88
124
2.76
70
1.18
30 7J-9108
153-0828
0.750
19.1
-12
1 3/16 - 12
-12
5.08
129
2.24
57
1.02
26 6V-9746
153-0867
1.000
25.4
-16
1 7/16 - 12
-16
5.71
145
3.37
86
1.27
32 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
PART NUMBER
D
A
Caterpillar High Pressure Hose Products
ORFS Female Swivel - 90° Elbow HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
153-0787
0.375
9.5
-6
11/16
- 16
-6
3.23
82
1.55
39
1.38
35 6V-8397
153-0788
0.375
9.5
-6
11/16
- 16
-6
3.27
83
1.57
40
3.11
79 6V-8397
153-0791
0.500
12.7
-8
13/16
- 16
-8
3.62
92
1.72
44
1.71
44 6V-8398
153-0792
0.500
12.7
-8
13/16
- 16
-8
3.66
93
1.80
46
3.60
92 6V-8398
197-3312
0.625
15.9
-10
1 - 14
-10
4.72
120
2.60
66
2.17
55 7J-9108
198-8517
0.625
15.9
-10
1 - 14
-10
4.88
124
2.76
70
3.94
100 7J-9108
153-0830
0.750
19.1
-12
1 3/16 - 12
-12
4.49
114
2.39
61
2.17
55 6V-9746
153-0832
0.750
19.1
-12
1 3/16 - 12
-12
4.65
118
2.40
61
4.29
109 6V-9746
153-0869
1.000
25.4
-16
1 7/16 - 12
-16
5.43
138
3.09
78
2.68
68 5K-9090
153-0871
1.000
25.4
-16
1 7/16 - 12
-16
5.51
140
3.09
78
5.04
128 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Double Collet B C
PART NUMBER
233-6319
40
D DROP O-RING (in) (mm) SEAL
HOSE I.D. (in) (mm)
1.000
25.4
HOSE DASH SIZE
-16
B LENGTH (in) (mm)
6.97
177
C CUT-OFF FACTOR (in) (mm)
2.05
52
XT-6™ ES Hose Permanent Couplings B C
Double Collet - 90° Elbow PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
153-0823
0.750
19.1
-12
5.00
127
2.76
70
5.00
127
243-1921
0.750
19.1
-12
5.12
130
2.87
73
5.12
130
233-6320
1.000
25.4
-16
5.28
134
2.83
72
5.28
134
Caterpillar High Pressure Hose Products
41
Caterpillar High Pressure Hose Products
XT-6™ ES Hose Permanent Couplings
42
XT-5™ ES Hose (1036/4199) and Couplings XT-5™ ES Hose (1036/4199).............................................................................................. 44 XT-5™ ES Hose Reusable Couplings................................................................................. 46 NPTF................................................................................................................................ 46 SAE Code 61 Flange........................................................................................................ 46 SAE Code 62 Flange........................................................................................................ 47 Caterpillar Flange............................................................................................................. 48 ORFS................................................................................................................................50 Braze-On.......................................................................................................................... 51 Double Collet.................................................................................................................... 51 BSPP................................................................................................................................ 52 Sleeves............................................................................................................................. 52 XT-5™ ES Hose Permanent Couplings............................................................................... 53 JIC 37°.............................................................................................................................. 53 SAE Code 61 Flange........................................................................................................ 53 SAE Code 62 Flange........................................................................................................ 54 Caterpillar Flange............................................................................................................. 54 ORFS................................................................................................................................55
Caterpillar High Pressure Hose Products
43
XT-5™ ES Hose (1036/4199) CATERPILLAR® XT-5
XT-5 ES Hose (1036) Exceeds the requirement of SAE 100R13. Note: Sold by the centimeter. PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
5P-0200
0.750
19.1
-12
1.26
32.1
20,000
137,896
5000
34,474
5.55
141
5P-0201
1.000
25.4
-16
1.52
38.7
20,000
137,896
5000
34,474
6.02
153
5P-0202
1.250
31.8
-20
1.96
49.8
20,000
137,896
5000
34,474
8.27
210
5P-0203
1.500
38.1
-24
2.26
57.3
20,000
137,896
5000
34,474
10.00
254
5P-8358
2.000
50.8
-32
2.80
71.1
20,000
137,896
5000
34,474
12.52
318
Construction: Fabric reinforced, synthetic rubber tube; four or six plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Very high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C). Couplings: Collet-type reusable, skive type, see XT-5 Hose Reusable Couplings section. Crimp-on permanent, skive type, see XT-5 Hose Permanent Coupling section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings. 1 Centerline of Hose
CATERPILLAR® XT-5
XT-5 ES ToughGuard (4199) Exceeds the requirement of SAE 100R13. Note: Sold by the centimeter. PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
276-2087
0.750
19.1
-12
1.26
32.1
20,000
137,896
5000
34,474
5.55
141
276-2088
1.000
25.4
-16
1.52
38.7
20,000
137,896
5000
34,474
6.02
153
276-2089
1.250
31.8
-20
1.96
49.8
20,000
137,896
5000
34,474
8.27
210
276-2090
1.500
38.1
-24
2.26
57.3
20,000
137,896
5000
34,474
10.00
254
276-2091
2.000
50.8
-32
2.80
71.1
20,000
137,896
5000
34,474
12.52
318
Construction: Fabric reinforced, synthetic rubber tube; four or six plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Very high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C). Couplings: Collet-type reusable, skive type, see XT-5 Hose Reusable Couplings section. Crimp-on permanent, skive type, see XT-5 Hose Permanent Coupling section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings.
Caterpillar High Pressure Hose Products
1 Centerline of Hose
44
XT-5™ ES Hose (1036/4199) XT-5 ES Hose Features and Benefits: • 1/2 SAE 100R13 Minimum Bend Radius. • Superior Abrasion Resistance Cover. • Aged Impulse Tested to 1 Million Cycles (2 X Industry Standards). • Mylar layline for easy identification.
XT Hose Coupling Features and Benefits: XT-5 ES Hose Couplings have the same advantages as XT-3 ES Hose Couplings as well as these added features for 5000 psi (35,000 kPa) application. EXCLUSIVE REUSABLE DESIGN Reuse XT Couplings over and over again for the lowest operating cost. In addition, you know you have the right coupling at the right time. (A) Slim, Collet-Type Style • No bolts or protrusions for easy installation, even in cramped places. (B) Multi-land Fingers • Grip the wires on the skived hose solidly to prevent coupling blow-off and provide better coupling retention.
warning!
TO AVOID SERIOUS PERSONAL INJURY TO THE OPERATOR AND EXTENSIVE DAMAGE TO THE EQUIPMENT, THE FOLLOWING PROCEDURES MUST BE OBSERVED. FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY.
1 2
(C) Tapered Fingers & Stem • Compressive force is slightly relieved so the hose can flex without failure at the rear of the coupling. This increases hose assembly life. (D) Multi-land Stem • Keeps fluid sealed in without inner liner damage and provides a positive coupling to hose seal. (E) Hardened Steel Sleeve • No sleeve bend or distortion so the sleeve retains its original size and shape and can be reused. • Hose stays firmly compressed in coupling, further aiding coupling retention. (F) Precision Machined O-Ring Head • To help eliminate hazardous fluid leaks and provide positive coupling head seal. (G) Extruded Stem • Orients metal grain for more uniform strength and fatigue resistance. • Braze joint between head and stem is eliminated resulting in leak free performance and excellent coupling assembly life. (H) Extruded Collet • More uniform strength for excellent coupling performance after repeated reuse.
ALWAYS match hose, stem assemblies and sleeves according to markings ( / + / UHP / ∞). NEVER interchange XT-3 ES hose, stem assemblies and sleeves marked with a triangle ( ) with XT-5 ES hose, stem assemblies and sleeves marked with a plus (+), XT-6 hose, stem assemblies and sleeves marked with (UHP) or XT-6 ES hose, stem assemblies and sleeves marked with an infinity sign (∞).
XT-3 ES HOSE
∞
XT-5 ES HOSE
∞
∞
XT-6 ES HOSE
Caterpillar High Pressure Hose Products
45
XT-5™ ES Hose Reusable Couplings NPTF Male B C PART NUMBER
6V-2448
HOSE I.D. (in) (mm)
1.000
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-16
1 - 11 1/2
-16
25.4
B LENGTH (in) (mm)
5.16
131
C CUT-OFF FACTOR (in) (mm)
2.49
63
A
SAE Code 61 Flange B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
155-2865
0.750
19.1
-12
1.50
38.1
-12
5.43
138
3.16
80 4J-5267
155-2866
1.000
25.4
-16
1.75
44.5
-16
5.94
151
3.30
84 4J-0520
155-2867
1.250
31.8
-20
2.00
50.8
-20
6.42
163
3.38
86 4J-0522
8T-7978
1.500
38.1
-24
2.37
60.3
-24
6.38
162
3.11
79 4J-0524
8C-5234
1.500
38.1
-24
2.81
71.4
-32
6.38
162
3.13
80 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 22 1/2° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
7X-1431
1.500 38.1
-24
2.37
60.3
-24
8.39
213
5.14
131
0.67
17 4J-0524
8T-7979
1.500 38.1
-24
2.37
60.3
-24
8.39
213
5.14
131
0.93
24 4J-0524
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 45° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
155-2868
0.750 19.1
-12
1.50
38.1
-12
5.16
131
2.88
73
0.97
25 4J-5267
155-2869
1.000 25.4
-16
1.75
44.5
-16
5.67
144
3.02
77
1.06
27 4J-0520
155-2870
1.250 31.8
-20
2.00
50.8
-20
6.61
168
3.57
91
1.20
31 4J-0522
8T-7980
1.500 38.1
-24
2.37
60.3
-24
8.15
207
4.91
125
1.48
38 4J-0524
155-2871
1.500 38.1
-24
2.81
71.4
-32
8.62
219
5.37
137
1.69
43 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
46
D DROP O-RING (in) (mm) SEAL
XT-5™ ES Hose Reusable Couplings B
SAE Code 61 Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
119-6729
0.750 19.1
-12
1.50
38.1
-12
4.45
113
2.18
55
2.11
54 4J-5267
155-2872
1.000 25.4
-16
1.75
44.5
-16
5.94
151
3.30
84
2.38
61 4J-0520
155-2873
1.250 31.8
-20
2.00
50.8
-20
7.24
184
4.21
107
3.40
86 4J-0522
3E-6822
1.500 38.1
-24
2.37
60.3
-24
6.38
162
3.11
79
3.19
81 4J-0524
155-2874
1.500 38.1
-24
2.81
71.4
-32
6.69
170
3.44
88
3.50
89 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 62 Flange B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
155-2875
0.750
19.1
-12
1.63
41.3
-12
5.51
140
3.24
82 4J-5267
155-2876
1.000
25.4
-16
1.87
47.6
-16
5.98
152
3.35
85 4J-0520
155-2877
1.250
31.8
-20
2.13
54.0
-20
6.30
160
3.25
83 4J-0522
155-2878
1.500
38.1
-24
2.50
63.5
-24
6.50
165
3.24
82 4J-0524
155-2879
2.000
50.8
-32
3.13
79.4
-32
8.11
206
4.29
109 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 62 Flange - 45° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
0.750 19.1
-12
1.63
41.3
-12
5.16
131
2.88
73
1.21
31 4J-5267
155-2881
1.000 25.4
-16
1.87
47.6
-16
5.63
143
2.97
76
1.31
33 4J-0520
155-2882
1.250 31.8
-20
2.13
54.0
-20
6.34
161
3.28
83
1.35
34 4J-0522
155-2883
1.500 38.1
-24
2.50
63.5
-24
8.50
216
5.27
134
1.59
40 4J-0524
155-2884
2.000 50.8
-32
3.13
79.4
-32
10.87
276
7.05
179
2.29
58 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
SAE Code 62 Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
155-2885
0.750 19.1
-12
1.63
41.3
-12
4.65
118
2.37
60
2.48
63 4J-5267
155-2886
1.000 25.4
-16
1.87
47.6
-16
5.16
131
2.53
64
2.73
69 4J-0520
155-2887
1.250 31.8
-20
2.13
54.0
-20
5.79
147
2.73
69
2.87
73 4J-0522
155-2888
1.500 38.1
-24
2.50
63.5
-24
6.69
170
3.44
88
3.35
85 4J-0524
155-2889
2.000 50.8
-32
3.13
79.4
-32
8.23
209
4.40
112
4.85
123 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
47
Caterpillar High Pressure Hose Products
155-2880
XT-5™ ES Hose Reusable Couplings Caterpillar Flange B C
A
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
PART NUMBER
HOSE I.D. (in) (mm)
2P-3270
0.750 19.1
-12
1.63
41.3
-12
5.55
141
3.45
88 1P-3702
2P-3930
0.750 19.1
-12
1.87
47.6
-16
5.55
141
3.45
88 1P-3703
5P-1125
1.000 25.4
-16
1.87
47.6
-16
6.18
157
3.54
90 1P-3703
5P-1131
1.000 25.4
-16
2.13
54.0
-20
6.18
157
3.54
90 1P-3704
2P-6733
1.250 31.8
-20
2.13
54.0
-20
6.46
164
3.40
86 1P-3704
2P-1416
1.250 31.8
-20
2.50
63.5
-24
6.46
164
3.40
86 1P-3705
5P-3093
1.500 38.1
-24
2.50
63.5
-24
6.57
167
3.31
84 1P-3705
8T-1009
1.500 38.1
-24
2.50
63.5
-24
8.74
222
5.49
140 1P-3705
5P-3101
1.500 38.1
-24
3.13
79.4
-32
6.57
167
3.31
84 1P-3709
193-1047
2.000 50.8
-32
2.50
63.5
-24
9.69
246
5.87
149 1P-3705
5P-7886
2.000 50.8
-32
3.13
79.4
-32
8.15
207
4.34
110 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 22 1/2° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
2P-3269
0.750 19.1
-12
1.63
41.3
-12
5.00
127
2.84
72
0.63
16 1P-3702
2P-3935
0.750 19.1
-12
1.87
47.6
-16
5.00
127
2.90
74
0.63
16 1P-3703
5P-1126
1.000 25.4
-16
1.87
47.6
-16
5.55
141
2.91
74
0.65
17 1P-3703
5P-1132
1.000 25.4
-16
2.13
54.0
-20
5.55
141
2.91
74
0.65
17 1P-3704
2P-6728
1.250 31.8
-20
2.13
54.0
-20
6.10
155
3.07
78
0.67
17 1P-3704
2P-1424
1.250 31.8
-20
2.50
63.5
-24
6.10
155
3.07
78
0.65
17 1P-3705
5P-6451
1.500 38.1
-24
2.50
63.5
-24
8.62
219
5.37
137
0.67
17 1P-3705
155-5471
2.000 50.8
-32
3.13
79.4
-32
11.46
291
7.65
194
1.04
27 1P-3709
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 30° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
2P-3268
0.750 19.1
-12
1.63
41.3
-12
4.84
123
2.76
70
0.87
22 1P-3702
2P-3934
0.750 19.1
-12
1.87
47.6
-16
4.88
124
2.81
72
0.87
22 1P-3703
5P-1127
1.000 25.4
-16
1.87
47.6
-16
5.67
144
3.00
76
0.91
23 1P-3703
5P-1133
1.000 25.4
-16
2.13
54.0
-20
5.67
144
3.00
76
0.91
23 1P-3704
2P-6729
1.250 31.8
-20
2.13
54.0
-20
6.22
158
3.17
80
0.93
24 1P-3704
2P-1415
1.250 31.8
-20
2.50
63.5
-24
6.22
158
3.17
80
0.93
24 1P-3705
5P-4877
1.500 38.1
-24
2.50
63.5
-24
8.58
218
5.31
135
1.04
27 1P-3705
111-7659
1.500 38.1
-24
2.50
63.5
-24
9.53
242
6.26
159
1.39
35 1P-3705
6V-1074
1.500 38.1
-24
3.13
79.4
-32
9.09
231
5.85
149
1.15
29 1P-3709
5P-7968
2.000 50.8
-32
3.13
79.4
-32
11.30
287
7.48
190
1.45
37 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
48
D DROP D-RING (in) (mm) SEAL
XT-5™ ES Hose Reusable Couplings Caterpillar Flange - 45° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
2P-3267
0.750 19.1
-12
1.63
41.3
-12
5.12
130
3.02
77
1.36
35 1P-3702
2P-3933
0.750 19.1
-12
1.87
47.6
-16
5.12
130
3.02
77
1.36
35 1P-3703
5P-1128
1.000 25.4
-16
1.87
47.6
-16
5.75
146
3.08
78
1.44
37 1P-3703
5P-1134
1.000 25.4
-16
2.13
54.0
-20
5.75
146
3.08
78
1.44
37 1P-3704
2P-6730
1.250 31.8
-20
2.13
54.0
-20
6.46
164
3.42
87
1.46
37 1P-3704
2P-1422
1.250 31.8
-20
2.50
63.5
-24
6.34
161
3.28
83
1.46
37 1P-3705
5P-3094
1.500 38.1
-24
2.50
63.5
-24
8.31
211
5.06
129
1.61
41 1P-3705
111-7660
1.500 38.1
-24
2.50
63.5
-24
9.09
231
5.84
148
2.16
55 1P-3705
5P-3102
1.500 38.1
-24
3.13
79.4
-32
8.74
222
5.47
139
1.81
46 1P-3709
5P-7959
2.000 50.8
-32
3.13
79.4
-32
10.91
277
7.09
180
2.34
59 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 60° Elbow B C
D
A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
2P-3265
0.750 19.1
-12
1.63
41.3
-12
5.08
129
2.93
75
1.83
47 1P-3702
2P-3932
0.750 19.1
-12
1.87
47.6
-16
5.00
127
2.93
75
1.83
47 1P-3703
5P-1129
1.000 25.4
-16
1.87
47.6
-16
5.71
145
3.04
77
1.97
50 1P-3703
5P-1135
1.000 25.4
-16
2.13
54.0
-20
5.71
145
3.04
77
1.97
50 1P-3704
2P-6731
1.250 31.8
-20
2.13
54.0
-20
6.30
160
3.24
82
2.03
52 1P-3704
2P-1418
1.250 31.8
-20
2.50
63.5
-24
6.30
160
3.24
82
2.03
52 1P-3705
5P-3096
1.500 38.1
-24
2.50
63.5
-24
7.87
200
4.61
117
2.15
55 1P-3705
111-7661
1.500 38.1
-24
2.50
63.5
-24
8.46
215
5.22
133
2.91
74 1P-3705
5P-3103
1.500 38.1
-24
3.13
79.4
-32
8.23
209
4.96
126
2.50
64 1P-3709
5P-7956
2.000 50.8
-32
3.13
79.4
-32
10.24
260
6.42
163
3.25
83 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
C
D
A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
5P-2604
0.750 19.1
-12
1.63
41.3
-12
5.55
141
3.26
83
2.07
53 1P-3702
5P-2619
0.750 19.1
-12
1.87
47.6
-16
5.55
141
3.26
83
2.07
53 1P-3703
5P-2620
1.000 25.4
-16
1.87
47.6
-16
6.14
156
3.48
88
2.22
57 1P-3703
5P-2621
1.000 25.4
-16
2.13
54.0
-20
6.14
156
3.48
88
2.22
57 1P-3704
5P-2599
1.250 31.8
-20
2.13
54.0
-20
6.73
171
3.68
93
2.30
59 1P-3704
5P-2622
1.250 31.8
-20
2.50
63.5
-24
6.73
171
3.68
93
2.30
59 1P-3705
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
49
Caterpillar High Pressure Hose Products
Caterpillar Flange - 67 1/2° Elbow B
XT-5™ ES Hose Reusable Couplings Caterpillar Flange - 90° Elbow
B C
D
A
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
2P-3263
0.750 19.1
-12
1.63
41.3
-12
4.45
113
2.38
60
2.66
68 1P-3702
6V-9994
0.750 19.1
-12
1.63
41.3
-12
4.84
123
2.55
65
4.72
120 1P-3705
2P-3931
0.750 19.1
-12
1.87
47.6
-16
4.45
113
2.38
60
2.66
68 1P-3703
5P-1130
1.000 25.4
-16
1.87
47.6
-16
5.20
132
2.53
64
2.89
74 1P-3703
3E-6820
1.000 25.4
-16
1.87
47.6
-16
5.67
144
3.03
77
5.20
132 1P-3703
5P-1136
1.000 25.4
-16
2.13
54.0
-20
5.20
132
2.53
64
2.89
74 1P-3704
2P-6732
1.250 31.8
-20
2.13
54.0
-20
5.83
148
2.77
70
3.03
77 1P-3704
7X-1478
1.250 31.8
-20
2.13
54.0
-20
5.83
148
2.77
70
5.91
150 1P-3704
2P-1420
1.250 31.8
-20
2.50
63.5
-24
5.83
148
2.77
70
3.03
77 1P-3705
139-4180
1.250 31.8
-20
2.50
63.5
-24
6.38
162
3.34
85
5.31
135 1P-3705
5P-3099
1.500 38.1
-24
2.50
63.5
-24
6.69
170
3.44
88
3.41
87 1P-3705
111-7662
1.500 38.1
-24
2.50
63.5
-24
6.69
170
3.44
88
4.15
106 1P-3705
5P-3105
1.500 38.1
-24
3.13
79.4
-32
6.69
170
3.43
87
3.68
94 1P-3709
5P-7903
2.000 50.8
-32
3.13
79.4
-32
8.19
208
4.39
111
4.92
125 1P-3709
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
7X-1451
0.750
19.1
-12
1 3/16 - 12
-12
3.74
95
1.66
42 6V-9746
7X-1452
1.000
25.4
-16
1 7/16 - 12
-16
4.41
112
1.78
45 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar High Pressure Hose Products
ORFS Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
7X-1467
0.750
19.1
-12
1 3/16 - 12
-12
5.59
142
3.31
84
1.01
26 6V-9746
7X-4814
1.000
25.4
-16
1 7/16 - 12
-16
6.61
168
3.98
101
1.26
32 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
50
D DROP O-RING (in) (mm) SEAL
XT-5™ ES Hose Reusable Couplings B C
ORFS Female Swivel - 90° Elbow PART NUMBER
D
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
7X-1468
0.750
19.1
-12
1 3/16 - 12
-12
4.41
112
2.12
54
2.17
55 6V-9746
7X-1469
0.750
19.1
-12
1 3/16 - 12
-12
4.45
113
2.15
55
4.29
109 6V-9746
7X-4815
1.000
25.4
-16
1 7/16 - 12
-16
5.12
130
2.47
63
2.68
68 5K-9090
-16
5.12
130
2.47
63
5.04
128 5K-9090
7X-4816
A
HOSE I.D. (in) (mm)
1.000
25.4
-16
1
7/16
- 12
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Braze-On B C
PART NUMBER
A
4Z-8154
HOSE I.D. (in) (mm)
1.500
38.1
HOSE DASH SIZE
-24
B LENGTH (in) (mm)
4.45
113
C CUT-OFF FACTOR (in) (mm)
1.20
30
Double Collet B C PART NUMBER
C
B
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
5P-3153
0.750
19.1
-12
6.38
162
1.83
46
5P-5000
1.000
25.4
-16
7.20
183
1.91
49
5P-4937
1.250
31.8
-20
8.11
206
2.02
51
5P-2825
1.500
38.1
-24
8.74
222
2.17
55
Double Collet - 90° Elbow HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
Caterpillar High Pressure Hose Products
PART NUMBER
D
HOSE I.D. (in) (mm)
D DROP (in) (mm)
5P-1306
0.750
19.1
-12
4.69
119
2.39
61
4.67
119
5P-1307
1.000
25.4
-16
5.35
136
2.69
68
5.33
136
5P-1308
1.250
31.8
-20
6.57
167
3.52
89
6.56
167
51
XT-5™ ES Hose Reusable Couplings BSPP Spherical Seat - Female Swivel B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
1.000
25.4
-16
1 1/4 - 11
-20
5.43
138
2.79
71
9X-7580
1.250
31.8
-20
1 1/4 - 11
-20
6.10
155
3.07
78
PART NUMBER
Caterpillar High Pressure Hose Products
C CUT-OFF FACTOR (in) (mm)
9X-7642
XT-5 Sleeves
52
B LENGTH (in) (mm)
HOSE I.D. (in) (mm)
HOSE DASH SIZE
5P-1027
0.750
19.1
-12
5P-1010
1.000
25.4
-16
5P-0477
1.250
31.8
-20
5P-3106
1.500
38.1
-24
5P-7884
2.000
50.8
-32
XT-5™ ES Hose Permanent Couplings JIC 37° Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
221-04741
0.750
19.1
-12
1 1/16 - 12
-12
4.06
103
1.65
42
221-04631
1.000
25.4
-16
1 5/16 - 12
-16
4.53
115
1.77
45
221-04621
1.250
31.8
-20
1 5/8 - 12
-20
5.12
130
2.08
53
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
SAE Code 61 Flange B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
221-05831
0.750
19.1
-12
1.50
38.1
-12
5.98
152
3.58
91 4J-5267
221-05841
1.000
25.4
-16
1.75
44.5
-16
6.06
154
3.31
84 4J-0520
221-05861
1.250
31.8
-20
2.00
50.8
-20
6.34
161
3.30
84 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
SAE Code 61 Flange - 45° Elbow B C
PART NUMBER
D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
221-05891
0.750 19.1
-12
1.50
38.1
-12
5.24
133
2.87
221-05881
1.000 25.4
-16
1.75
44.5
-16
5.79
147
221-05921
1.250 31.8
-20
2.00
50.8
-20
7.44
189
D DROP O-RING (in) (mm) SEAL
73
0.98
25 4J-5267
3.03
77
1.06
27 4J-0520
4.40
112
2.22
56 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B
SAE Code 61 Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
119-6730
0.750 19.1
-12
1.50
38.1
-12
4.45
113
2.18
55
2.11
54 4J-5267
221-05931
1.000 25.4
-16
1.75
44.5
-16
6.06
154
3.31
84
2.40
61 4J-0520
221-05951
1.250 31.8
-20
2.00
50.8
-20
7.20
183
4.17
106
3.00
76 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
53
Caterpillar High Pressure Hose Products
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
XT-5™ ES Hose Permanent Couplings B
SAE Code 62 Flange
C
A
PART NUMBER
253-87881
HOSE I.D. (in) (mm)
1.250
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
31.8
-20
2.50
63.5
B LENGTH (in) (mm)
6.10
155
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
3.11
79 4J-0524
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
Caterpillar Flange B C A
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
PART NUMBER
HOSE I.D. (in) (mm)
8T-6957
0.750 19.1
-12
1.63
41.3
-12
5.75
146
3.45
88 1P-3702
8T-6959
0.750 19.1
-12
1.87
47.6
-16
5.75
146
3.45
88 1P-3703
3E-6806
1.000 25.4
-16
1.87
47.6
-16
6.18
157
3.54
90 1P-3703
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 30° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
8T-6961
0.750 19.1
-12
1.63
41.3
-12
5.04
128
2.76
70
0.87
22 1P-3702
8T-6963
0.750 19.1
-12
1.87
47.6
-16
5.04
128
2.76
70
0.87
22 1P-3703
3E-6801
1.000 25.4
-16
1.87
47.6
-16
5.67
144
3.00
76
0.91
23 1P-3703
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - 45° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
8T-6964
0.750 19.1
-12
1.63
41.3
-12
5.24
133
2.94
75
1.36
35 1P-3702
8T-6966
0.750 19.1
-12
1.87
47.6
-16
5.24
133
2.94
75
1.36
35 1P-3703
3E-6802
1.000 25.4
-16
1.87
47.6
-16
5.75
146
3.08
78
1.44
37 1P-3703
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
54
D DROP D-RING (in) (mm) SEAL
XT-5™ ES Hose Permanent Couplings Caterpillar Flange - 60° Elbow B C
D
A
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
8T-6967
0.750 19.1
-12
1.63
41.3
-12
5.08
129
2.80
71
1.83
47 1P-3702
8T-6969
0.750 19.1
-12
1.87
47.6
-16
5.12
130
2.82
72
1.83
47 1P-3703
3E-6803
1.000 25.4
-16
1.87
47.6
-16
5.71
145
3.04
77
1.97
50 1P-3703
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
Caterpillar Flange - 90° Elbow
C
D
A
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP D-RING (in) (mm) SEAL
8T-6970
0.750 19.1
-12
1.63
41.3
-12
4.61
117
2.31
59
2.66
68 1P-3702
8T-6971
0.750 19.1
-12
1.63
41.3
-12
4.61
117
2.31
59
4.72
120 1P-3702
8T-6972
0.750 19.1
-12
1.87
47.6
-16
4.61
117
2.33
59
2.66
68 1P-3703
3E-6804
1.000 25.4
-16
1.87
47.6
-16
5.20
132
2.53
64
2.89
74 1P-3703
3E-6805
1.000 25.4
-16
1.87
47.6
-16
5.67
144
3.03
77
5.20
132 1P-3703
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
7X-1441
0.750
19.1
-12
1 3/16 - 12
-12
3.94
100
1.66
42 6V-9746
7X-1437
1.000
25.4
-16
1 7/16 - 12
-16
4.41
112
1.78
45 5K-9090
221-04771
1.250
31.8
-20
1 5/8 - 12
-20
6.06
154
2.45
62 6V-8400
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
D
PART NUMBER
124-2328 A
HOSE I.D. (in) (mm)
0.750
19.1
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-12
1 3/16 - 12
-12
B LENGTH (in) (mm)
5.83
148
C CUT-OFF FACTOR (in) (mm)
3.55
90
D DROP O-RING (in) (mm) SEAL
0.30
8 6V-9746
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
55
Caterpillar High Pressure Hose Products
ORFS Female Swivel - 15° Elbow
XT-5™ ES Hose Permanent Couplings ORFS Female Swivel - 45° Elbow B
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
7X-4811
0.750
19.1
-12
1 3/16 - 12
-12
5.47
139
3.31
84
1.01
26 6V-9746
7X-4817
1.000
25.4
-16
1 7/16 - 12
-16
6.61
168
3.97
101
1.26
32 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
ORFS Female Swivel - 90° Elbow PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
7X-4812
0.750
19.1
-12
1 3/16 - 12
-12
4.41
112
2.12
54
2.17
55 6V-9746
7X-4813
0.750
19.1
-12
1 3/16 - 12
-12
4.29
109
2.13
54
4.29
109 6V-9746
7X-4818
1.000
25.4
-16
1 7/16 - 12
-16
5.12
130
2.47
63
2.68
68 5K-9090
7X-4819
1.000
25.4
-16
1 7/16 - 12
-16
5.12
130
2.47
63
5.04
128 5K-9090
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
56
D DROP O-RING (in) (mm) SEAL
XT-3™ ES Hose (736/4135) and Couplings XT-3™ ES Hose (736/4135)................................................................................................ 58 XT-3™ ES Hose Reusable Couplings................................................................................. 60 NPTF................................................................................................................................ 60 STOR................................................................................................................................60 JIC 37°.............................................................................................................................. 60 SAE Code 61 Flange........................................................................................................ 62 Caterpillar Flange............................................................................................................. 68 Komatsu Style Flange...................................................................................................... 68 ORFS................................................................................................................................69 Braze-On.......................................................................................................................... 70 Double Collet.................................................................................................................... 70 BSPP................................................................................................................................ 71 Sleeves............................................................................................................................. 72 XT-3™ ES Hose Permanent Couplings............................................................................... 73 NPTF................................................................................................................................ 73 STOR................................................................................................................................73 JIC 37°.............................................................................................................................. 73 SAE Code 61 Flange........................................................................................................ 75 SAE Code 62 Flange........................................................................................................ 78 Caterpillar Flange............................................................................................................. 79 Komatsu Style Flange...................................................................................................... 79 ORFS................................................................................................................................80 Double Collet.................................................................................................................... 82 DIN 20078........................................................................................................................ 83 JIS - BSPP........................................................................................................................83 XT-3™ ES Hose Captive Flange Couplings........................................................................ 86
Caterpillar High Pressure Hose Products
57
XT-3™ ES Hose (736/4135) CAT 736 XT-3 ES
XT-3 ES Hose (736) Exceeds the requirement of SAE 100R12. Note: Sold by the inch. PART NUMBER
HOSE I.D. (in) (mm)
165-0016
0.375
9.5
165-0017
0.500
165-0018
0.625
165-0020 165-0021
HOSE DASH SIZE
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
-6
0.81
20.5
16,000
110,317
4000
27,580
2.52
64
12.7
-8
0.94
23.8
16,000
110,317
4000
27,580
3.50
89
15.9
-10
1.08
27.4
16,000
110,317
4000
27,580
4.02
102
0.750
19.1
-12
1.22
30.9
16,000
110,317
4000
27,580
4.76
121
1.000
25.4
-16
1.50
38.2
16,000
110,317
4000
27,580
6.02
153
165-0023
1.250
31.8
-20
1.85
47.0
12,000
82,738
3000
20,685
8.27
210
165-0024
1.500
38.1
-24
2.11
53.5
10,000
68,948
2500
17,237
10.00
254
165-0025
2.000
50.8
-32
2.63
66.7
10,000
68,948
2500
17,237
12.52
318
Construction: Fabric reinforced, synthetic rubber tube; four plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Very high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C). Couplings: Collet-type reusable, skive type, see XT-3 ES Hose Reusable Couplings section. Crimp-on permanent, skive type, see XT-3 ES Hose Permanent Couplings section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings. 1 Centerline of Hose
CAT 736 XT-3 ES
XT-3 ES ToughGuard (4135) Exceeds the requirement of SAE 100R12. Note: Sold by the inch. PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
238-8337
0.375
9.5
-6
0.81
20.5
16,000
110,317
4000
27,580
2.52
238-8339
0.500
12.7
-8
0.94
23.8
16,000
110,317
4000
27,580
3.50
89
238-8340
0.625
15.9
-10
1.08
27.4
16,000
110,317
4000
27,580
4.02
102
238-8341
0.750
19.1
-12
1.22
30.9
16,000
110,317
4000
27,580
4.76
121
238-8342
1.000
25.4
-16
1.50
38.2
16,000
110,317
4000
27,580
5.98
152
245-1420
1.250
31.8
-20
1.85
47.0
12,000
82,738
3000
20,685
8.27
210
Caterpillar High Pressure Hose Products
Construction: Fabric reinforced, synthetic rubber tube; four plies of spirally-wrapped high tensile steel wire reinforcement, separated by layers of synthetic rubber. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Very high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +250° F (-40° C to +121° C). Couplings: Collet-type reusable, skive type, see XT-3 ES Hose Reusable Couplings section. Crimp-on permanent, skive type, see XT-3 ES Hose Permanent Couplings section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings. 1 Centerline of Hose
58
64
XT-3™ ES Hose (736/4135) XT-3 ES Hose Features and Benefits: • 1/2 SAE 100R12 Minimum Bend Radius. • Superior Abrasion Resistance Cover. • Aged Impulse Tested to 1 Million Cycles (2 X Industry Standards). • Mylar layline for easy identification.
XT Hose Coupling Features and Benefits: EXCLUSIVE REUSABLE DESIGN Reuse XT Couplings over and over again for the lowest operating cost. In addition, you know you have the right coupling at the right time. (A) Slim, Collet-Type Style • No bolts or protrusions for easy installation, even in cramped places. (B) Multi-land Fingers • Grip the wires on the skived hose solidly to prevent coupling blow-off and provide better coupling retention. (C) Tapered Fingers & Stem • Compressive force is slightly relieved so the hose can flex without failure at the rear of the coupling. This increases hose assembly life.
warning!
TO AVOID SERIOUS PERSONAL INJURY TO THE OPERATOR AND EXTENSIVE DAMAGE TO THE EQUIPMENT, THE FOLLOWING PROCEDURES MUST BE OBSERVED. FAILURE TO DO SO COULD RESULT IN PERSONAL INJURY.
1 2
(D) Multi-land Stem • Keeps fluid sealed in without inner liner damage and provides a positive coupling to hose seal. (E) Hardened Steel Sleeve • No sleeve bend or distortion so the sleeve retains its original size and shape and can be reused. • Hose stays firmly compressed in coupling, further aiding coupling retention. (F) Precision Machined O-Ring Head • To help eliminate hazardous fluid leaks and provide positive coupling head seal. (G) Extruded Stem • Orients metal grain for more uniform strength and fatigue resistance. • Braze joint between head and stem is eliminated resulting in leak free performance and excellent coupling assembly life. (H) Extruded Collet • More uniform strength for excellent coupling performance after repeated reuse.
ALWAYS match hose, stem assemblies and sleeves according to markings ( / + / UHP / ∞). NEVER interchange XT-3 ES hose, stem assemblies and sleeves marked with a triangle ( ) with XT-5 ES hose, stem assemblies and sleeves marked with a plus (+), XT-6 hose, stem assemblies and sleeves marked with (UHP) or XT-6 ES hose, stem assemblies and sleeves marked with an infinity sign (∞).
XT-3 ES HOSE
∞
XT-5 ES HOSE
∞
∞
XT-6 ES HOSE
Caterpillar High Pressure Hose Products
59
XT-3™ ES Hose Reusable Couplings NPTF Male B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
9S-4123
0.375
9.5
-6
1/4
- 18
-4
3.39
86
1.72
44
2P-0921
0.375
9.5
-6
3/8
- 18
-6
3.39
86
1.73
44
7S-2369
0.500
12.7
-8
1/2
- 14
-8
3.74
95
2.07
53
3/4
- 14
6V-4656
0.750
19.1
-12
-12
3.90
99
2.10
53
7S-2371
1.000
25.4
-16
1 - 11 1/2
-16
4.41
112
2.43
62
2P-0922
1.250
31.8
-20
1 1/4 - 11 1/2
-20
5.20
132
2.85
72
2P-0923
1.500
38.1
-24
1 1/2 - 11 1/2
-24
5.51
140
2.91
74
2P-0924
2.000
50.8
-32
2 - 11 1/2
-32
6.10
155
3.28
83
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
STOR Male B C
PART NUMBER
8S-7092
HOSE I.D. (in) (mm)
0.500
12.7
3/4
-8
- 16
-8
B LENGTH (in) (mm)
3.43
87
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
1.76
45 3K-0360
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
JIC 37° Female Swivel B C
Caterpillar High Pressure Hose Products
A
60
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
8S-6417
0.375
9.5
-6
9/16
- 18
-6
3.15
80
1.60
41
2P-0987
0.375
9.5
-6
3/4
- 16
-8
3.39
86
1.72
44
8S-4055
0.500
12.7
-8
3/4
- 16
-8
3.27
83
1.72
44
2P-3178
0.500
12.7
-8
3/4
- 16
-8
6.50
165
4.83
123
8S-4064
0.500
12.7
-8
7/8
- 14
-10
3.39
86
1.72
44
9S-0128
0.500
12.7
-8
1 1/16 - 12
-12
3.39
86
1.72
44
6V-4657
0.750
19.1
-12
1 1/16 - 12
-12
3.58
91
1.79
45
1/16
6V-4461
0.750
19.1
-12
1
- 12
-12
4.06
103
2.28
58
8S-3918
1.000
25.4
-16
1 5/16 - 12
-16
4.61
117
2.62
67
2P-0988
1.250
31.8
-20
1 5/8 - 12
-20
4.96
126
2.61
66
2P-0991
1.500
38.1
-24
1 7/8 - 12
-24
5.24
133
2.63
67
2P-0995
2.000
50.8
-32
2 1/2 - 12
-32
5.83
148
3.02
77
XT-3™ ES Hose Reusable Couplings JIC 37° Female Swivel - 30° Elbow B C
PART NUMBER
D
6V-3283
HOSE I.D. (in) (mm)
1.000
25.4
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-16
1 5/16 - 12
-16
B LENGTH (in) (mm)
5.83
148
C CUT-OFF FACTOR (in) (mm)
3.84
98
D DROP (in) (mm)
1.06
27
A
JIC 37° Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
1P-9919
0.375
9.5
-6
9/16
- 18
-6
3.86
98
2.31
59
1.10
28
2P-1458
0.375
9.5
-6
3/4
- 16
-8
4.13
105
2.45
62
1.08
28
9S-9727
0.500
12.7
-8
3/4
- 16
-8
3.90
99
2.35
60
1.13
29
2P-1400
0.500
12.7
-8
7/8
- 14
-10
4.02
102
2.33
59
1.14
29
6V-4666
0.750
19.1
-12
1 1/16 - 12
-12
4.45
113
2.67
68
1.26
32
2P-1409
1.000
25.4
-16
1 5/16 - 12
-16
5.51
140
3.55
90
1.65
42
6V-3502
1.000
25.4
-16
1 5/16 - 12
-16
8.15
207
6.17
157
3.35
85
155-2834
1.250
31.8
-20
1 5/8 - 12
-20
7.01
178
4.64
118
1.69
43
7/8
155-2835
1.500
38.1
-24
1
- 12
-24
7.91
201
5.31
135
1.73
44
155-2836
2.000
50.8
-32
2 1/2 - 12
-32
8.78
223
5.95
151
2.20
56
JIC 37° Female Swivel - 60° Elbow B C
PART NUMBER
D
B
HOSE DASH SIZE
A THREAD SIZE 7/8
- 14
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
9S-9725
0.500
12.7
-8
-10
3.74
95
2.08
53
1.52
39
6V-4670
0.750
19.1
-12
1 1/16 - 12
-12
4.29
109
2.52
64
1.71
44
1P-9892
1.000
25.4
-16
1 5/16 - 12
-16
5.31
135
3.33
85
2.24
57
JIC 37° Female Swivel - 90° Elbow
C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
8S-6393
0.375
9.5
-6
9/16
- 18
-6
3.19
81
1.64
42
1.81
46
5P-2467
0.375
9.5
-6
9/16
- 18
-6
3.31
84
1.63
41
2.24
57
8S-6392
0.375
9.5
-6
9/16
- 18
-6
3.19
81
1.64
42
3.25
83
2P-1461
0.375
9.5
-6
3/4
- 16
-8
3.43
87
1.74
44
1.81
46
2P-1462
0.375
9.5
-6
3/4
- 16
-8
3.43
87
1.74
44
3.25
83
8S-6391
0.500
12.7
-8
3/4
- 16
-8
3.07
78
1.54
39
2.11
54
1P-8408
0.500
12.7
-8
3/4
- 16
-8
3.23
82
1.69
43
3.62
92
9S-2332
0.500
12.7
-8
3/4
- 16
-8
3.31
84
1.63
41
4.49
114
61
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
XT-3™ ES Hose Reusable Couplings B
JIC 37° Female Swivel - 90° Elbow (continued)
C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
1P-4899
0.500
12.7
-8
7/8
- 14
-10
3.23
82
1.55
39
2.13
54
1P-1719
0.500
12.7
-8
7/8
- 14
-10
3.23
82
1.55
39
3.25
83
6V-4678
0.750
19.1
-12
-12
4.02
102
2.24
57
2.54
65
1 1/16 - 12 1/16
6V-4680
0.750
19.1
-12
1
- 12
-12
4.09
104
2.33
59
3.62
92
8K-5114
1.000
25.4
-16
1 5/16 - 12
-16
4.72
120
2.74
70
2.62
67
1P-9589
1.000
25.4
-16
1 5/16 - 12
-16
4.53
115
2.56
65
3.37
86
2P-1411
1.000
25.4
-16
1 5/16 - 12
-16
4.53
115
2.56
65
5.61
143
155-2838
1.250
31.8
-20
1 5/8 - 12
-20
5.08
129
2.73
69
3.35
85
155-2839
1.500
38.1
-24
1 7/8 - 12
-24
5.94
151
3.34
85
3.54
90
155-2840
2.000
50.8
-32
2 1/2 - 12
-32
7.28
185
4.46
113
4.72
120
JIC 37° Female Swivel - 90° Block B C
PART NUMBER
D
5P-3857
HOSE I.D. (in) (mm)
0.375
9.5
HOSE DASH SIZE
-6
A THREAD SIZE 9/16
- 18
A THREAD DASH SIZE
-6
B LENGTH (in) (mm)
3.70
94
C CUT-OFF FACTOR (in) (mm)
2.04
52
D DROP (in) (mm)
0.81
A
SAE Code 61 Flange B C
Caterpillar High Pressure Hose Products
A
62
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
4S-5403
0.375
9.5
-6
1.19
30.2
-8
3.58
91
1.93
49 4J-5140
3S-8617
0.500
12.7
-8
1.19
30.2
-8
3.58
91
1.93
49 4J-5140
3S-8976
0.500
12.7
-8
1.19
30.2
-8
3.58
91
1.93
49 4J-5140
3S-9454
0.500
12.7
-8
1.50
38.1
-12
3.58
91
1.92
49 4J-5267
6V-4651
0.750
19.1
-12
1.50
38.1
-12
3.94
100
2.16
55 4J-5267
6V-4655
0.750
19.1
-12
1.50
38.1
-12
4.96
126
3.17
80 4J-5267
6V-4652
0.750
19.1
-12
1.75
44.5
-16
3.94
100
2.16
55 4J-0520
147-7328
0.750
19.1
-12
1.75
44.5
-16
4.96
126
3.17
80 4J-0520
6V-4653
0.750
19.1
-12
2.00
50.8
-20
3.94
100
2.16
55 4J-0522
3S-8496
1.000
25.4
-16
1.75
44.5
-16
4.13
105
2.17
55 4J-0520
2P-1801
1.000
25.4
-16
1.75
44.5
-16
4.53
115
2.56
65 4J-0520
7S-0570
1.000
25.4
-16
2.00
50.8
-20
4.13
105
2.17
55 4J-0522
6V-1404
1.000
25.4
-16
2.00
50.8
-20
5.31
135
3.35
85 4J-0522
2P-1313
1.000
25.4
-16
2.37
60.3
-24
4.13
105
2.17
55 4J-0524
1P-7930
1.000
25.4
-16
2.81
71.4
-32
4.13
105
2.17
55 4J-0527
5S-24201
1.000
25.4
-16
2.25
57.2
4.92
125
2.96
75 1H-9696
3S-8567
1.250
31.8
-20
2.00
50.8
-20
4.84
123
2.47
63 4J-0522
1P-1219
1.250
31.8
-20
2.00
50.8
-20
5.47
139
3.11
79 4J-0522
21
XT-3™ ES Hose Reusable Couplings SAE Code 61 Flange (continued) B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
5S-3779
1.250
31.8
-20
2.37
60.3
-24
4.84
123
2.47
63 4J-0524
1P-7931
1.250
31.8
-20
2.37
60.3
-24
8.86
225
6.51
165 4J-0524
1P-7929
1.250
31.8
-20
2.81
71.4
-32
5.31
135
2.96
75 4J-0527
1P-1238
1.500
38.1
-24
2.37
60.3
-24
5.87
149
3.28
83 4J-0524
7S-9370
1.500
38.1
-24
2.81
71.4
-32
5.28
134
2.65
67 4J-0527
4S-7492
2.000
50.8
-32
2.81
71.4
-32
5.51
140
2.67
68 4J-0527
147-2027
2.000
50.8
-32
2.81
71.4
-32
7.40
188
4.56
116 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Special Head Size
SAE Code 61 Flange - 22 1/2° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
3S-8618
0.500 12.7
-8
1.19
30.2
-8
3.74
95
2.08
53
0.33
5S-2907
0.500 12.7
-8
1.50
38.1
-12
3.74
95
2.08
53
0.33
9 4J-5267
6V-4658
0.750 19.1
-12
1.50
38.1
-12
4.37
111
2.57
65
0.43
11 4J-5267
6V-4659
0.750 19.1
-12
1.75
44.5
-16
4.37
111
2.57
65
0.43
11 4J-0520
3S-8497
1.000 25.4
-16
1.75
44.5
-16
4.84
123
2.88
73
0.43
11 4J-0520
7S-0571
1.000 25.4
-16
2.00
50.8
-20
4.84
123
2.88
73
0.43
11 4J-0522
5P-1706
1.000 25.4
-16
2.37
60.3
-24
6.18
157
4.20
107
0.43
11 4J-0524
3S-8568
1.250 31.8
-20
2.00
50.8
-20
5.12
130
2.77
70
0.49
13 4J-0522
3S-8569
1.250 31.8
-20
2.00
50.8
-20
5.08
129
2.71
69
0.71
18 4J-0522
5S-3784
1.250 31.8
-20
2.37
60.3
-24
5.16
131
2.79
71
0.49
13 4J-0524
3S-9327
1.500 38.1
-24
2.37
60.3
-24
6.46
164
3.83
97
0.61
16 4J-0524
3S-9328
1.500 38.1
-24
2.37
60.3
-24
6.34
161
3.73
95
0.89
23 4J-0524
9S-0284
1.500 38.1
-24
2.81
71.4
-32
6.46
164
3.83
97
0.61
16 4J-0527
4S-7493
2.000 50.8
-32
2.81
71.4
-32
7.24
184
4.40
112
0.87
22 4J-0527
4S-7494
2.000 50.8
-32
2.81
71.4
-32
7.17
182
4.34
110
1.26
32 4J-0527
9 4J-5140
SAE Code 61 Flange - 30° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
3S-8619
0.500 12.7
-8
1.19
30.2
-8
3.46
88
1.80
46
0.49
13 4J-5140
5S-9590
0.500 12.7
-8
1.50
38.1
-12
3.50
89
1.83
46
0.49
13 4J-5267
6V-4661
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
0.59
15 4J-5267
6V-4662
0.750 19.1
-12
1.75
44.5
-16
3.94
100
2.16
55
0.59
15 4J-0520
3S-8498
1.000 25.4
-16
1.75
44.5
-16
4.33
110
2.37
60
0.63
16 4J-0520
7S-0572
1.000 25.4
-16
2.00
50.8
-20
4.33
110
2.37
60
0.63
16 4J-0522
8S-1396
1.250 31.8
-20
2.37
60.3
-24
5.08
129
2.71
69
0.73
19 4J-0524
1P-4948
1.250 31.8
-20
2.37
60.3
-24
6.93
176
4.58
116
1.71
44 4J-0524
1P-1708
1.500 38.1
-24
2.81
71.4
-32
6.34
161
3.73
95
0.89
23 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
63
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
XT-3™ ES Hose Reusable Couplings SAE Code 61 Flange - 45° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
4S-5405
0.375
9.5
-6
1.19
30.2
-8
3.50
89
1.84
47
0.69
18 4J-5140
3S-8972
0.500 12.7
-8
1.19
30.2
-8
3.50
89
1.84
47
0.79
20 4J-5140
5S-9591
0.500 12.7
-8
1.50
38.1
-12
3.50
89
1.85
47
0.78
20 4J-5267
5S-9614
0.500 12.7
-8
1.75
44.5
-16
3.50
89
1.85
47
0.78
20 4J-0520
6V-4664
0.750 19.1
-12
1.50
38.1
-12
4.09
104
2.30
58
0.96
25 4J-5267
6V-4665
0.750 19.1
-12
1.75
44.5
-16
4.09
104
2.30
58
0.96
25 4J-0520
3S-8499
1.000 25.4
-16
1.75
44.5
-16
4.61
117
2.64
67
1.06
27 4J-0520
7S-0573
1.000 25.4
-16
2.00
50.8
-20
4.61
117
2.64
67
1.06
27 4J-0522
3S-8570
1.250 31.8
-20
2.00
50.8
-20
5.43
138
3.06
78
1.20
31 4J-0522
5S-3778
1.250 31.8
-20
2.37
60.3
-24
5.31
135
2.96
75
1.18
30 4J-0524
3S-9329
1.500 38.1
-24
2.37
60.3
-24
6.34
161
3.73
95
1.44
37 4J-0524
5P-3229
1.500 38.1
-24
2.81
71.4
-32
6.77
172
4.17
106
1.44
37 4J-0527
4S-7495
2.000 50.8
-32
2.81
71.4
-32
7.60
193
4.77
121
2.05
52 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 60° Elbow B C
D
Caterpillar High Pressure Hose Products
A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
3S-8973
0.500 12.7
-8
1.19
30.2
-8
3.58
91
1.93
49
1.08
28 4J-5140
7S-3611
0.500 12.7
-8
1.50
38.1
-12
3.62
92
1.94
49
1.08
28 4J-5267
6V-4668
0.750 19.1
-12
1.50
38.1
-12
4.13
105
2.34
59
1.36
35 4J-5267
6V-4669
0.750 19.1
-12
1.75
44.5
-16
4.13
105
2.34
59
1.36
35 4J-0520
3S-8501
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
1.52
39 4J-0520
7S-0574
1.000 25.4
-16
2.00
50.8
-20
4.72
120
2.74
70
1.52
39 4J-0522
3S-8571
1.250 31.8
-20
2.00
50.8
-20
5.47
139
3.12
79
1.69
43 4J-0522
8S-9372
1.250 31.8
-20
2.00
50.8
-20
5.98
152
3.63
92
2.56
65 4J-0522
7S-4078
1.250 31.8
-20
2.37
60.3
-24
5.47
139
3.12
79
1.69
43 4J-0524
142-5137
1.500 38.1
-24
2.00
50.8
-20
6.38
162
3.77
96
2.03
52 4J-0522
3S-9330
1.500 38.1
-24
2.37
60.3
-24
6.38
162
3.77
96
2.03
52 4J-0524
7S-8440
1.500 38.1
-24
2.81
71.4
-32
6.38
162
3.77
96
2.03
52 4J-0527
4S-7496
2.000 50.8
-32
2.81
71.4
-32
7.64
194
4.80
122
2.89
74 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 67 1/2° Elbow B C
D
A
64
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
3S-8974
0.500 12.7
-8
1.19
30.2
-8
3.43
87
1.74
44
1.24
32 4J-5140
5S-9592
0.500 12.7
-8
1.50
38.1
-12
3.43
87
1.76
45
1.25
32 4J-5267
5S-9615
0.500 12.7
-8
1.75
44.5
-16
3.43
87
1.76
45
1.25
32 4J-0520
6V-4671
0.750 19.1
-12
1.50
38.1
-12
4.09
104
2.30
58
1.59
41 4J-5267
6V-4672
0.750 19.1
-12
1.75
44.5
-16
4.09
104
2.30
58
1.59
41 4J-0520
6V-4673
0.750 19.1
-12
2.00
50.8
-20
4.09
104
2.30
58
1.59
41 4J-0522
XT-3™ ES Hose Reusable Couplings SAE Code 61 Flange - 67 1/2° Elbow (continued) B C
D
A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
3S-8502
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.76
70
1.75
45 4J-0520
5S-3454
1.000 25.4
-16
2.00
50.8
-20
4.72
120
2.76
70
1.75
45 4J-0522
3S-8572
1.250 31.8
-20
2.00
50.8
-20
5.43
138
3.08
78
1.95
50 4J-0522
8S-8957
1.250 31.8
-20
2.37
60.3
-24
5.43
138
3.08
78
1.95
50 4J-0524
3S-9331
1.500 38.1
-24
2.37
60.3
-24
6.34
161
3.73
95
2.30
59 4J-0524
8S-3649
1.500 38.1
-24
2.81
71.4
-32
6.34
161
3.73
95
2.30
59 4J-0527
5S-3788
2.000 50.8
-32
2.81
71.4
-32
7.52
191
4.69
119
2.95
75 4J-0527
4S-7497
2.000 50.8
-32
2.81
71.4
-32
7.60
193
4.77
121
3.35
85 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
SAE Code 61 Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
0.375
9.5
-6
1.19
30.2
-8
3.31
84
1.63
41
1.40
36 4J-5140
4S-5407
0.375
9.5
-6
1.19
30.2
-8
3.31
84
1.63
41
1.61
41 4J-5140
3S-8975
0.500 12.7
-8
1.19
30.2
-8
3.31
84
1.63
41
1.61
41 4J-5140
7S-2175
0.500 12.7
-8
1.19
30.2
-8
3.31
84
1.63
41
3.25
83 4J-5140
5S-9593
0.500 12.7
-8
1.50
38.1
-12
3.31
84
1.63
41
1.62
41 4J-5267
5S-9638
0.500 12.7
-8
1.50
38.1
-12
3.31
84
1.63
41
2.88
73 4J-5267
5S-9616
0.500 12.7
-8
1.75
44.5
-16
3.31
84
1.63
41
1.62
41 4J-0520
6V-4675
0.750 19.1
-12
1.50
38.1
-12
3.98
101
2.18
55
2.11
54 4J-5267
6V-4681
0.750 19.1
-12
1.50
38.1
-12
4.09
104
2.31
59
3.76
96 4J-5267
6V-4682
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
5.00
127 4J-5267
6V-4676
0.750 19.1
-12
1.75
44.5
-16
3.98
101
2.18
55
2.11
54 4J-0520
6V-4679
0.750 19.1
-12
1.75
44.5
-16
3.94
100
2.16
55
3.11
79 4J-0520
6V-4677
0.750 19.1
-12
2.00
50.8
-20
4.06
103
2.29
58
2.13
54 4J-0522
5S-2105
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
2.13
54 4J-0520
7S-0577
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
2.24
57 4J-0520
3S-8503
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
2.38
61 4J-0520
6D-9961
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
4.63
118 4J-0520
7S-0575
1.000 25.4
-16
2.00
50.8
-20
4.72
120
2.74
70
2.38
61 4J-0522
2P-4813
1.000 25.4
-16
2.00
50.8
-20
4.72
120
2.74
70
4.63
118 4J-0522
7S-3122
1.000 25.4
-16
2.37
60.3
-24
4.72
120
2.74
70
2.38
61 4J-0524
5P-1031
1.000 25.4
-16
2.37
60.3
-24
4.53
115
2.54
65
4.25
108 4J-0524
3S-8573
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.83
72
2.64
67 4J-0522
5S-3811
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.85
72
3.58
91 4J-0522
5S-3826
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.85
72
4.02
102 4J-0522
5S-3832
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.85
72
4.39
112 4J-0522
5S-3820
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.85
72
4.63
118 4J-0522
8S-8221
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.85
72
5.12
130 4J-0522
5S-3842
1.250 31.8
-20
2.00
50.8
-20
5.20
132
2.85
72
6.61
168 4J-0522
5S-3777
1.250 31.8
-20
2.37
60.3
-24
5.20
132
2.85
72
2.70
69 4J-0524
2P-9923
1.250 31.8
-20
2.37
60.3
-24
5.12
130
2.78
71
3.11
79 4J-0524
7S-4105
1.250 31.8
-20
2.37
60.3
-24
5.20
132
2.85
72
4.63
118 4J-0524
65
Caterpillar High Pressure Hose Products
7S-5064
XT-3™ ES Hose Reusable Couplings SAE Code 61 Flange - 90° Elbow (continued)
B C
D
A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
B LENGTH (in) (mm)
D DROP O-RING (in) (mm) SEAL
5P-3230
1.250 31.8
-20
2.37
60.3
-24
5.20
132
2.85
72
5.12
130 4J-0524
194-4769
1.250 31.8
-20
2.81
71.4
-32
5.12
130
2.91
74
3.11
79 4J-0527
3S-9332
1.500 38.1
-24
2.37
60.3
-24
5.98
152
3.38
86
3.13
80 4J-0524
5S-3836
1.500 38.1
-24
2.37
60.3
-24
6.02
153
3.40
86
5.81
148 4J-0524
8S-9345
1.500 38.1
-24
2.37
60.3
-24
6.02
153
3.40
86
6.75
172 4J-0524
7S-8439
1.500 38.1
-24
2.81
71.4
-32
5.98
152
3.38
86
3.13
80 4J-0527
8S-8946
1.500 38.1
-24
2.81
71.4
-32
6.02
153
3.40
86
4.51
115 4J-0527
8S-9344
1.500 38.1
-24
2.81
71.4
-32
6.02
153
3.40
86
6.75
172 4J-0527
4S-7498
2.000 50.8
-32
2.81
71.4
-32
6.81
173
3.98
101
4.63
118 4J-0527
3P-0421
2.000 50.8
-32
2.81
71.4
-32
6.97
177
4.12
105
6.50
165 4J-0527
3P-0422
2.000 50.8
-32
2.81
71.4
-32
6.97
177
4.12
105
7.99
203 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
SAE Code 61 Flange - 100° Elbow
C E
PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP E O-RING (in) (mm) ANGLE SEAL
6V-4685 0.750 19.1
-12
1.50
38.1
-12
3.78
96
1.98
50
2.34
60
100 4J-5267
6V-4686 0.750 19.1
-12
1.75
44.5
-16
3.78
96
1.98
50
2.34
60
100 4J-0520
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
A
B
SAE Code 61 Flange - 110° Elbow
C
Caterpillar High Pressure Hose Products
E
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
7S-1761 0.500 12.7
-8
1.50
38.1
-12
3.46
88
1.81
46
1.95
50
110 4J-5267
6V-4687 0.750 19.1
-12
1.50
38.1
-12
3.70
94
1.93
49
2.50
64
110 4J-5267
7S-1720 1.000 25.4
-16
1.75
44.5
-16
4.53
115
2.54
65
2.87
73
110 4J-0520
5P-5121 1.000 25.4
-16
2.00
50.8
-20
4.53
115
2.54
65
2.87
73
110 4J-0522
5P-9593 1.000 25.4
-16
2.00
50.8
-20
3.66
93
1.68
43
5.25
133
110 4J-0522
7S-1707 1.250 31.8
-20
2.00
50.8
-20
5.00
127
2.65
67
3.13
80
110 4J-0522
2P-2675 1.250 31.8
-20
2.37
60.3
-24
5.00
127
2.65
67
3.19
81
110 4J-0524
2P-8355 1.500 38.1
-24
2.37
60.3
-24
5.47
139
2.85
72
3.74
95
110 4J-0524
5P-9956 1.500 38.1
-24
2.37
60.3
-24
7.20
183
4.58
116
4.69
119
110 4J-0524
2P-6704 2.000 50.8
-32
2.81
71.4
-32
6.46
164
3.63
92
5.51
140
110 4J-5027
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
66
D DROP E O-RING (in) (mm) ANGLE SEAL
XT-3™ ES Hose Reusable Couplings B
SAE Code 61 Flange - 125° Elbow
C E
PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
5P-4321 2.000 50.8
-32
A HEAD SIZE (in) (mm)
2.81
A FLANGE DASH SIZE
71.4
-32
B LENGTH (in) (mm)
7.13
181
C CUT-OFF FACTOR (in) (mm)
4.28
109
D DROP E O-RING (in) (mm) ANGLE SEAL
5.93
151
125 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
B
SAE Code 61 Flange - 135° Elbow
C E
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP E O-RING (in) (mm) ANGLE SEAL
2P-9939 0.500 12.7
-8
1.19
30.2
-8
3.46
88
1.78
45
2.13
54
135 4J-5140
6V-4688 0.750 19.1
-12
1.50
38.1
-12
5.04
128
3.26
83
2.72
69
135 4J-5267
6V-3364 0.750 19.1
-12
1.75
44.5
-16
4.88
124
3.09
78
2.76
70
135 4J-0520
6V-1236 1.000 25.4
-16
1.75
44.5
-16
4.13
105
2.15
55
3.44
88
135 4J-0520
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange No Groove B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
7S-5450
1.250
31.8
-20
2.37
60.3
-24
4.84
123
2.47
63
3P-0595
1.500
38.1
-24
2.37
60.3
-24
5.87
149
3.26
83
C
PART NUMBER D
9S-3173
HOSE I.D. (in) (mm)
1.250
31.8
HOSE DASH SIZE
-20
A HEAD SIZE (in) (mm)
2.37
60.3
A FLANGE DASH SIZE
-24
B LENGTH (in) (mm)
5.31
135
C CUT-OFF FACTOR (in) (mm)
2.96
75
D DROP (in) (mm)
1.18
30
A
67
Caterpillar High Pressure Hose Products
SAE Code 61 Flange No Groove - 45° Elbow B
XT-3™ ES Hose Reusable Couplings SAE Code 61 Flange No Groove - 60° Elbow B C
PART NUMBER D
9S-3172
HOSE I.D. (in) (mm)
1.250
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
31.8
-20
2.37
A FLANGE DASH SIZE
60.3
B LENGTH (in) (mm)
-24
5.47
139
C CUT-OFF FACTOR (in) (mm)
3.12
79
D DROP (in) (mm)
1.69
A
Caterpillar Flange B C
A
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
PART NUMBER
HOSE I.D. (in) (mm)
3E-6826
0.750 19.1
-12
1.63
41.3
-12
5.75
146
3.95
100 1P-3702
3E-6867
1.000 25.4
-16
1.87
47.6
-16
5.51
140
3.55
90 1P-3703
3E-6868
1.250 31.8
-20
2.13
54.0
-20
5.79
147
3.42
87 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Komatsu Style Flange B C
PART NUMBER
A
8S-6457
HOSE I.D. (in) (mm)
0.500
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
12.7
-8
1.34
34.1
-10
B LENGTH (in) (mm)
3.58
91
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
1.92
49 4J-8996
Caterpillar High Pressure Hose Products
Komatsu Style Flange - 60° Elbow B C
D
A
68
PART NUMBER
HOSE I.D. (in) (mm)
8S-6458
0.500 12.7
HOSE DASH SIZE
-8
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
1.34
34.1
-10
B LENGTH (in) (mm)
3.62
92
C CUT-OFF FACTOR (in) (mm)
1.94
49
D DROP O-RING (in) (mm) SEAL
1.08
28 4J-8996
43
XT-3™ ES Hose Reusable Couplings Komatsu Style Flange - 90° Elbow
B C
D
PART NUMBER
HOSE I.D. (in) (mm)
8S-6459
0.500 12.7
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
-8
1.34
34.1
B LENGTH (in) (mm)
-10
3.31
84
C CUT-OFF FACTOR (in) (mm)
1.63
41
D DROP O-RING (in) (mm) SEAL
1.62
41 4J-8996
A
ORFS Male B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
184-7202
1.250
31.8
-20
1 11/16 - 12
-20
4.92
125
2.68
68 6V-8400
184-7203
1.500
38.1
-24
2 - 12
-24
5.16
131
2.56
65 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
6V-9945
0.375
9.5
-6
11/16
- 16
-6
2.87
73
1.33
34 6V-8397
6V-9949
0.500
12.7
-8
13/16
- 16
-8
3.03
77
1.48
38 6V-8398
155-2856
0.500
12.7
-8
1 - 14
-10
3.15
80
1.48
38 6V-8398
3/16
6V-9953
0.750
19.1
-12
1
- 12
-12
3.46
88
1.69
43 6V-9746
6V-9957
1.000
25.4
-16
1 7/16 - 12
-16
3.74
95
1.78
45 5K-9090
155-2857
1.250
31.8
-20
1 11/16 - 12
-20
4.33
110
1.98
50 6V-8400
155-2858
1.500
38.1
-24
2 - 12
-24
4.72
120
2.12
54 8T-0315
ORFS Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
6V-9946
0.375
9.5
-6
11/16
- 16
-6
3.70
94
2.17
55
0.69
18 6V-8397
6V-9950
0.500
12.7
-8
13/16
- 16
-8
4.13
105
2.59
66
0.85
22 6V-8398
155-2859
0.500
12.7
-8
1 - 14
-10
4.33
110
2.65
67
0.85
22 7J-9108
3/16
6V-9954
0.750
19.1
-12
1
- 12
-12
4.96
126
3.18
81
1.10
28 6V-9746
6V-9958
1.000
25.4
-16
1 7/16 - 12
-16
5.63
143
3.67
93
1.26
32 5K-9090
155-2860
1.250
31.8
-20
1 11/16 - 12
-20
6.69
170
4.34
110
1.38
35 6V-8400
155-2861
1.500
38.1
-24
2 - 12
-24
7.76
197
5.13
130
1.50
38 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
69
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
XT-3™ ES Hose Reusable Couplings B C
ORFS Female Swivel - 90° Elbow PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
6V-9947
0.375
9.5
-6
11/16
- 16
-6
2.91
74
1.38
35
1.38
35 6V-8397
6V-9948
0.375
9.5
-6
11/16
- 16
-6
2.91
74
1.39
35
2.72
69 6V-8397
6V-9951
0.500
12.7
-8
13/16
- 16
-8
3.15
80
1.61
41
1.71
44 6V-8398
13/16
- 16
6V-9952
0.500
12.7
-8
-8
3.11
79
1.58
40
3.27
83 6V-8398
155-2862
0.500
12.7
-8
1 - 14
-10
3.35
85
1.66
42
1.71
44 7J-9108
6V-9955
0.750
19.1
-12
1 3/16 - 12
-12
3.70
94
1.91
48
2.28
58 6V-9746
6V-9956
0.750
19.1
-12
1 3/16 - 12
-12
3.70
94
1.91
48
4.21
107 6V-9746
6V-9959
1.000
25.4
-16
1 7/16 - 12
-16
4.37
111
2.39
61
2.66
68 5K-9090
6V-9960
1.000
25.4
-16
1 7/16 - 12
-16
4.33
110
2.37
60
4.92
125 5K-9090
155-2863
1.250
31.8
-20
1 11/16 - 12
-20
5.12
130
2.77
70
2.90
74 6V-8400
155-2864
1.500
38.1
-24
2 - 12
-24
6.02
153
3.40
86
3.22
82 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Braze-On B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
0.375
9.5
-6
0.43
10.9
4.02
102
2.34
59
5P-1451
0.500
12.7
-8
0.55
14.0
5.20
132
3.55
90
5P-1452
0.750
19.1
-12
0.83
21.0
5.31
135
3.52
89
5P-1453
1.000
25.4
-16
1.11
28.3
5.31
135
3.33
85
1P-8457
1.250
31.8
-20
1.36
34.6
5.28
134
2.91
74
1P-8458
1.500
38.1
-24
1.55
39.4
5.67
144
3.04
77
1P-8456
2.000
50.8
-32
2.04
51.9
5.16
131
2.31
59
Double Collet Caterpillar High Pressure Hose Products
C CUT-OFF FACTOR (in) (mm)
5P-1450
B C PART NUMBER
70
D DROP O-RING (in) (mm) SEAL
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
3P-0642
0.375
9.5
-6
5.12
130
1.79
45
3P-0643
0.500
12.7
-8
5.12
130
1.79
45
6V-4689
0.750
19.1
-12
5.35
136
1.78
45
2P-2523
1.000
25.4
-16
5.71
145
1.79
45
2P-1315
1.250
31.8
-20
6.73
171
2.02
51
3P-0644
1.500
38.1
-24
7.24
184
2.01
51
3P-0645
2.000
50.8
-32
7.68
195
2.01
51
XT-3™ ES Hose Reusable Couplings B
C
Double Collet - 90° Elbow PART NUMBER
D
HOSE I.D. (in) (mm)
5P-8886
0.500
12.7
6V-1606
0.500
6V-4690
0.750
5P-4699 5P-4700
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
-8
3.35
85
1.66
42
3.33
85
12.7
-8
4.84
123
3.16
80
3.33
85
19.1
-12
4.33
110
2.54
64
4.31
110
1.000
25.4
-16
5.00
127
3.04
77
5.00
127
1.250
31.8
-20
5.87
149
3.52
89
5.87
149
6V-2897
1.500
38.1
-24
6.50
165
3.89
99
6.50
165
6V-0298
2.000
50.8
-32
7.68
195
4.83
123
7.66
195
BSPP Spherical Seat - Female Swivel B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE 3/4
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
9X-7575
0.750
19.1
-12
- 14
-12
3.62
92
1.83
47
9X-7574
1.000
25.4
-16
1 - 11
-16
4.13
105
2.16
55
9X-7641
1.000
25.4
-16
1 1/4 - 11
-20
4.17
106
2.21
56
BSPP Spherical Seat - Female Swivel - 45° Elbow B
C
PART NUMBER
D A
HOSE DASH SIZE
9X-7602
0.750
19.1
-12
9X-7573
1.000
25.4
-16
A THREAD SIZE 3/4
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
- 14
-12
5.16
131
3.39
86
1.13
29
1 - 11
-16
5.59
142
3.64
92
1.51
38
BSPP Spherical Seat - Female Swivel - 90° Elbow
C
PART NUMBER D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
9X-7603
0.750
19.1
-12
9X-7570
1.000
25.4
-16
A THREAD SIZE 3/4
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
- 14
-12
5.00
127
3.22
82
2.48
63
1 - 11
-16
4.21
107
2.26
58
2.99
76
A
71
Caterpillar High Pressure Hose Products
B
HOSE I.D. (in) (mm)
XT-3™ ES Hose Reusable Couplings XT-3 ES Sleeves
Caterpillar High Pressure Hose Products
PART NUMBER
72
HOSE I.D. (in) (mm)
HOSE DASH SIZE
4S-5414
0.375
9.5
-6
3S-8606
0.500
12.7
-8
3S-7166
0.750
19.1
-12
3S-7252
1.000
25.4
-16
3S-7116
1.250
31.8
-20
3S-8330
1.500
38.1
-24
4S-7507
2.000
50.8
-32
XT-3™ ES Hose Permanent Couplings B
NPTF Male
C
THREAD
PART NUMBER A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
221-05601
0.375
9.5
-6
3/8
- 18
-6
2.72
69
1.22
31
221-05611
0.375
9.5
-6
1/2
- 14
-8
2.91
74
1.42
36
221-05621
0.500
12.7
-8
3/8
- 18
-6
2.64
67
0.94
24
221-05631
0.500
12.7
-8
1/2
- 14
-8
2.80
71
1.10
28
221-05641
0.500
12.7
-8
3/4
- 14
-12
2.80
71
1.10
28
221-05651
0.625
15.9
-10
1/2
- 14
-8
2.99
76
1.50
38
221-05661
0.625
15.9
-10
3/4
- 14
-12
3.07
78
1.57
40
221-05671
0.750
19.1
-12
3/4
- 14
-12
3.07
78
1.46
37
221-05681
0.750
19.1
-12
-16
3.39
86
1.77
45
221-05691
1.000
25.4
-16
-12
3.90
99
2.05
52
221-05701
1.000
25.4
-16
1 - 11 1/2
-16
3.58
91
1.73
44
1/4
1/2
1 - 11 1/2 3/4
- 14
221-05711
1.250
31.8
-20
1
-20
3.78
96
1.84
47
221-05721
1.500
38.1
-24
1 1/2 - 11 1/2
-24
5.63
143
2.99
76
221-05731
2.000
50.8
-32
2 - 11 1/2
-32
5.55
141
2.80
71
- 11
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
STOR Male
B C
PART NUMBER THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
221-05581
0.750
19.1
-12
1 1/16 - 12
-12
2.91
74
1.30
33
228-30241
0.750
19.1
-12
1 1/16 - 12
-12
2.91
74
1.38
35
221-05591
1.000
25.4
-16
1 5/16 - 12
-16
3.50
89
1.65
42
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B
PART NUMBER THREAD
A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
Caterpillar High Pressure Hose Products
JIC 37° Male
C
C CUT-OFF FACTOR (in) (mm)
221-05481
0.375
9.5
-6
9/16
- 18
-6
2.72
69
1.22
31
221-05491
0.375
9.5
-6
3/4
- 16
-8
2.87
73
1.38
35
221-05501
0.500
12.7
-8
3/4
- 16
-8
2.87
73
1.18
30
- 14
-10
2.80
71
1.10
28
- 14
-10
2.99
76
1.50
38
221-05511
0.500
12.7
-8
7/8
221-05521
0.625
15.9
-10
7/8
221-05531
0.625
15.9
-10
1 1/16 - 12
-12
3.15
80
1.61
41
221-05541
0.750
19.1
-12
1 1/16 - 12
-12
3.11
79
1.50
38
221-05551
0.750
19.1
-12
1 5/16 - 12
-16
3.35
85
1.73
44
221-05561
1.000
25.4
-16
1 5/16 - 12
-16
3.86
98
2.01
51
221-05571
1.250
31.8
-20
1 5/8 - 12
-20
3.74
95
1.81
46
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
73
XT-3™ ES Hose Permanent Couplings JIC 37° Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
6V-9932
0.375
9.5
-6
9/16
- 18
-6
3.15
80
1.60
41
155-2831
0.375
9.5
-6
3/4
- 16
-8
3.39
86
1.72
44
6V-9936
0.500
12.7
-8
3/4
- 16
-8
3.27
83
1.72
44
- 14
-10
3.39
86
1.72
44
- 14
-10
2.48
63
0.94
24
-12
2.44
62
0.94
24
-10
2.44
62
0.91
23
155-2832
0.500
12.7
-8
7/8
221-05751
0.625
15.9
-10
7/8
221-05761
0.625
15.9
-10
221-05771
0.750
19.1
-12
146-8531
0.750
19.1
-12
1 1/16 - 12
-12
3.58
91
1.79
45
155-2833
0.750
19.1
-12
1 5/16 - 12
-16
3.58
91
1.79
45
3E-6831
1.000
25.4
-16
1 5/16 - 12
-16
4.02
102
2.03
52
221-05781
1.000
25.4
-16
1 5/8 - 12
-20
3.15
80
1.30
33
1 1/16 - 12 7/8
- 14
221-05791
5/8
1.250
31.8
-20
1
- 12
-20
3.54
90
2.13
54
221-05801
1.500
38.1
-24
1 7/8 - 12
-24
0.91
23
2.33
59
221-05811
2.000
50.8
-32
2 1/2 - 12
-32
5.67
144
2.95
75
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
JIC 37° Female Swivel - 45° Elbow B C
PART NUMBER
D
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
6V-9933
0.375
9.5
-6
9/16
- 18
-6
3.86
98
2.31
59
1.10
28
221-04601
0.375
9.5
-6
3/4
- 16
-8
3.23
82
1.73
44
0.71
18
238-1125
0.375
9.5
-6
3/4
- 16
-8
4.09
104
2.44
62
1.10
28
6V-9937
0.500
12.7
-8
3/4
- 16
-8
3.90
99
2.35
60
1.13
29
146-8533
0.750
19.1
-12
1 1/16 - 12
-12
4.45
113
2.67
68
1.26
32
221-04641
0.750
19.1
-12
1 5/16 - 12
-16
4.13
105
2.56
65
1.06
27
5/16
3E-6832
1.000
25.4
-16
1
- 12
-16
5.43
138
3.45
88
1.65
42
221-04651
1.250
31.8
-20
1 5/8 - 12
-20
6.10
155
4.00
102
1.73
44
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
PART NUMBER
D
A
74
JIC 37° Female Swivel - 90° Elbow HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
221-04661
0.375
9.5
-6
9/16
- 18
-6
2.83
72
1.34
34
1.10
28
6V-9934
0.375
9.5
-6
9/16
- 18
-6
3.19
81
1.64
42
1.81
46
6V-9935
0.375
9.5
-6
9/16
- 18
-6
3.19
81
1.64
42
3.25
83
221-04671
0.375
9.5
-6
3/4
- 16
-8
2.83
72
1.34
34
1.38
35
231-8794
0.375
9.5
-6
3/4
- 16
-8
3.43
87
1.73
44
1.81
46
231-8795
0.375
9.5
-6
3/4
- 16
-8
3.43
87
1.73
44
3.27
83
228-30191
0.500
12.7
-8
3/4
- 16
-8
3.27
83
1.65
42
1.10
28
- 16
-8
3.07
78
1.54
39
2.11
54
- 16
-8
3.23
82
1.69
43
3.62
92
6V-9938
0.500
12.7
-8
3/4
6V-9939
0.500
12.7
-8
3/4
XT-3™ ES Hose Permanent Couplings B C
JIC 37° Female Swivel - 90° Elbow (continued) PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
155-2837
0.500
12.7
-8
7/8
- 14
-10
3.23
82
1.54
39
2.13
54
221-04681
0.625
15.9
-10
7/8
- 14
-10
3.46
88
1.93
49
1.73
44
221-04691
0.625
15.9
-10
-12
3.46
88
1.93
49
2.05
52
1 1/16 - 12
221-04791
1/16
0.750
19.1
-12
1
- 12
-12
3.66
93
2.09
53
1.81
46
146-8535
0.750
19.1
-12
1 1/16 - 12
-12
4.02
102
2.24
57
2.54
65
231-8796
0.750
19.1
-12
1 1/16 - 12
-12
4.09
104
1.93
49
3.62
92
221-04751
0.750
19.1
-12
1 1/16 - 12
-12
3.66
93
2.09
53
3.74
95
221-04701
0.750
19.1
-12
1 5/16 - 12
-16
3.66
93
2.09
53
2.52
64
3E-6833
1.000
25.4
-16
1 5/16 - 12
-16
4.72
120
2.74
70
2.62
67
221-04761
1.000
25.4
-16
1 5/16 - 12
-16
4.84
123
2.99
76
4.37
111
1.250 31.8 -20 1 5/8 - 12 -20 1.46 37 3.44 87 3.43 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
87
221-04711
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
SAE Code 61 Flange B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
8T-3698
0.375
9.5
-6
1.19
30.2
8T-3702
0.500
12.7
-8
1.19
8T-3711
0.500
12.7
-8
1.50
8T-3717
0.750
19.1
-12
8T-3723
0.750
19.1
9X-7665
1.000
221-05101
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
-8
3.58
91
1.92
49 4J-5140
30.2
-8
3.58
91
1.92
49 4J-5140
38.1
-12
3.58
91
1.92
49 4J-5267
1.50
38.1
-12
3.94
100
2.16
55 4J-5267
-12
1.75
44.5
-16
3.94
100
2.16
55 4J-0520
25.4
-16
1.75
44.5
-16
4.53
115
2.56
65 4J-0520
1.250
31.8
-20
1.75
44.5
-16
4.06
103
1.70
43 4J-0520
221-05111
1.250
31.8
-20
2.00
50.8
-20
4.06
103
2.12
54 4J-0522
228-29801
1.250
31.8
-20
2.37
60.3
-24
4.17
106
2.24
57 4J-0522
221-05821
1.500
38.1
-24
3.13
79.4
-32
5.24
133
2.76
70 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
SAE Code 61 Flange - 22 1/2° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
221-05061
1.250 31.8
-20
2.00
50.8
-20
4.92
125
2.99
76
0.51
13 4J-0522
221-05121
1.250 31.8
-20
2.37
60.3
-24
4.92
125
2.99
76
0.51
13 4J-0524
221-05911
1.500 38.1
-24
2.81
71.4
-32
6.10
155
3.58
91
0.63
16 4J-0527
221-06011
2.000 50.8
-32
2.81
71.4
-32
7.40
188
4.80
122
0.87
22 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
75
Caterpillar High Pressure Hose Products
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
XT-3™ ES Hose Permanent Couplings SAE Code 61 Flange - 30° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
8T-3703
0.500 12.7
-8
1.19
30.2
-8
3.50
89
1.82
46
0.49
13 4J-5140
8T-37121
0.500 12.7
-8
1.50
38.1
-12
3.50
89
1.82
46
0.49
13 4J-5267
8T-3718
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
0.59
15 4J-5267
8T-3724
0.750 19.1
-12
1.75
44.5
-16
3.94
100
2.16
55
0.59
15 4J-0520
9X-7666
1.000 25.4
-16
1.75
44.5
-16
4.33
110
2.37
60
0.63
16 4J-0520
221-05091
1.250 31.8
-20
2.00
50.8
-20
5.12
130
3.18
81
0.71
18 4J-0522
221-05291
1.500 38.1
-24
2.37
60.3
-24
6.22
158
3.70
94
0.87
22 4J-0524
221-05961
1.500 38.1
-24
2.81
71.4
-32
6.22
158
3.70
94
0.87
22 4J-0527
221-06031
2.000 50.8
-32
2.81
71.4
-32
7.64
194
5.00
127
1.22
31 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
SAE Code 61 Flange - 45° Elbow B C
PART NUMBER
D
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
8T-3699
0.375
9.5
-6
1.19
30.2
-8
3.50
89
1.84
47
0.69
18 4J-5140
8T-3704
0.500 12.7
-8
1.19
30.2
-8
3.50
89
1.84
47
0.79
20 4J-5140
8T-3713
0.500 12.7
-8
1.50
38.1
-12
3.50
89
1.84
47
0.79
20 4J-5267
8T-3719
0.750 19.1
-12
1.50
38.1
-12
4.09
104
2.30
58
0.96
25 4J-5267
8T-3725
0.750 19.1
-12
1.75
44.5
-16
4.09
104
2.30
58
0.96
25 4J-0520
9X-7667
1.000 25.4
-16
1.75
44.5
-16
4.61
117
2.64
67
1.06
27 4J-0520
221-05031
1.250 31.8
-20
2.00
50.8
-20
5.43
138
3.51
89
1.18
30 4J-0522
228-29811
1.250 31.8
-20
2.37
60.3
-24
5.43
138
3.50
89
1.10
28 4J-0524
221-05301
1.500 38.1
-24
2.37
60.3
-24
6.46
164
3.98
101
1.42
36 4J-0524
221-05971
1.500 38.1
-24
2.81
71.4
-32
6.46
164
3.98
101
1.46
37 4J-0527
221-06041
2.000 50.8
-32
2.81
71.4
-32
7.91
201
5.31
135
2.05
52 4J-0527
221-05041
2.000 50.8
-32
3.31
84.1
-40
7.91
201
5.31
135
2.05
52 6J-2680
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
SAE Code 61 Flange - 60° Elbow B C
D
A
76
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
8T-3705
0.500 12.7
-8
1.19
30.2
-8
3.58
91
1.92
49
1.08
28 4J-5140
8T-3714
0.500 12.7
-8
1.50
38.1
-12
3.58
91
1.92
49
1.08
28 4J-5267
228-30171
0.500 12.7
-8
1.50
38.1
-12
3.54
90
1.93
49
1.10
28 4J-5267
8T-3720
0.750 19.1
-12
1.50
38.1
-12
4.13
105
2.34
59
1.36
35 4J-5267
8T-3731
0.750 19.1
-12
1.75
44.5
-16
4.13
105
2.34
59
1.36
35 4J-0520
9X-7668
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
1.52
39 4J-0520
221-05051
1.250 31.8
-20
2.00
50.8
-20
5.63
143
3.69
94
1.85
47 4J-0522
XT-3™ ES Hose Permanent Couplings SAE Code 61 Flange - 60° Elbow (continued) B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
221-05151
1.250 31.8
-20
2.37
60.3
-24
5.63
143
3.70
94
1.69
43 4J-0524
221-05311
1.500 38.1
-24
2.37
60.3
-24
6.50
165
4.02
102
2.05
52 4J-0524
221-05981
1.500 38.1
-24
2.81
71.4
-32
6.50
165
4.02
102
2.05
52 4J-0527
221-06051
2.000 50.8
-32
2.81
71.4
-32
7.99
203
5.39
137
2.87
73 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
D
SAE Code 61 Flange - 67 1/2° Elbow PART NUMBER
231-8797
A
HOSE I.D. (in) (mm)
0.750 19.1
HOSE DASH SIZE
-12
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
1.75
44.5
-16
B LENGTH (in) (mm)
4.09
104
C CUT-OFF FACTOR (in) (mm)
2.28
58
D DROP O-RING (in) (mm) SEAL
1.61
41 4J-0520
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
SAE Code 61 Flange - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
0.375
9.5
-6
1.19
30.2
-8
3.31
84
1.62
41
1.61
41 4J-5140
8T-3706
0.500 12.7
-8
1.19
30.2
-8
3.31
84
1.62
41
1.61
41 4J-5140
8T-3707
0.500 12.7
-8
1.19
30.2
-8
3.31
84
1.62
41
3.25
83 4J-5140
8T-3715
0.500 12.7
-8
1.50
38.1
-12
3.31
84
1.62
41
1.61
41 4J-5267
7X-4823
0.500 12.7
-8
1.50
38.1
-12
3.31
84
1.62
41
2.88
73 4J-5267
8T-3721
0.750 19.1
-12
1.50
38.1
-12
3.98
101
2.18
55
2.11
54 4J-5267
3E-6818
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
3.76
96 4J-5267
8T-3722
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
5.00
127 4J-5267
8T-3732
0.750 19.1
-12
1.75
44.5
-16
3.98
101
2.18
55
2.11
54 4J-0520
9X-7669
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
2.38
61 4J-0520
9X-7670
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
4.63
118 4J-0520
221-05071
1.250 31.8
-20
2.00
50.8
-20
5.35
136
3.43
87
2.64
67 4J-0522
228-29821
1.250 31.8
-20
2.37
60.3
-24
5.39
137
3.43
87
2.64
67 4J-0524
221-06091
2.000 50.8
-32
2.81
71.4
-32
7.48
190
4.88
124
4.49
114 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
77
Caterpillar High Pressure Hose Products
8T-3700
XT-3™ ES Hose Permanent Couplings B
SAE Code 62 Flange
C
A
PART NUMBER
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
155-28411
0.375
9.5
-6
1.25
31.8
-8
3.62
92
1.94
49 4J-5140
155-28421
0.500
12.7
-8
1.25
31.8
-8
3.82
97
2.15
55 4J-5140
155-2843
0.750
19.1
-12
1.63
41.3
-12
3.90
99
2.10
53 4J-5267
155-28441
1.000
25.4
-16
1.87
47.6
-16
4.33
110
2.37
60 4L-0520
221-05331
1.500
38.1
-24
2.50
63.5
-24
5.83
148
3.31
84 4J-0524
221-06101
2.000
50.8
-32
2.81
71.4
-32
6.18
157
3.54
90 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B
SAE Code 62 Flange - 45° Elbow
C
D
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
155-28451
0.500 12.7
-8
1.25
31.8
-8
3.90
99
2.21
56
0.87
22 4J-5140
155-28461
0.750 19.1
-12
1.63
41.3
-12
4.65
118
2.86
73
1.12
29 4J-5267
155-28471
1.000 25.4
-16
1.87
47.6
-16
5.51
140
3.53
90
1.28
33 4J-0520
221-05341
1.500 38.1
-24
2.50
63.5
-24
6.89
175
4.37
111
1.85
47 4J-0524
221-06111
2.000 50.8
-32
2.81
71.4
-32
8.07
205
5.43
138
2.17
55 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
SAE Code 62 Flange - 90° Elbow
D
Caterpillar High Pressure Hose Products
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
155-28481
0.375
9.5
-6
1.25
31.8
-8
2.91
74
1.25
32
1.75
45 4J-5140
155-28491
0.500 12.7
-8
1.25
31.8
-8
3.62
92
1.94
49
1.75
45 4J-5140
155-2850
0.750 19.1
-12
1.63
41.3
-12
4.37
111
2.59
66
2.31
59 5J-5267
155-2851
1.000 25.4
-16
1.87
47.6
-16
4.96
126
3.00
76
2.75
70 4J-0520
221-05351
1.500 38.1
-24
2.50
63.5
-24
6.34
161
3.86
98
3.78
96 4J-0524
221-06121
2.000 50.8
-32
2.81
71.4
-32
7.52
191
4.88
124
4.69
119 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
78
XT-3™ ES Hose Permanent Couplings Caterpillar Flange B C A
PART NUMBER
HOSE I.D. (in) (mm)
3E-6836
0.750 19.1
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
-12
1.63
A FLANGE DASH SIZE
41.3
-12
B LENGTH (in) (mm)
5.75
146
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
3.95
100 1P-3702
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Flange - High Vibration Coupling B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR D-RING (in) (mm) SEAL
194-2505
1.000 25.4
-16
1.87
47.6
-16
4.25
108
2.17
55 1P-3703
194-2506
1.000 25.4
-16
2.13
54.0
-20
5.47
139
3.35
85 1P-3704
241-4318
1.250 31.8
-20
2.13
54.0
-20
5.08
129
3.27
83 1P-3704
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Komatsu Style Flange B C
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
8T-3708
0.500
12.7
-8
1.34
34.1
-10
3.58
91
1.92
49 4J-8996
221-05381
0.625
15.9
-10
1.34
34.1
-10
3.50
89
2.01
51 4J-8996
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
PART NUMBER
D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
221-05391
0.500 12.7
-8
1.34
34.1
-10
3.46
88
1.77
45
0.83
21 4J-8996
221-05401
0.625 15.9
-10
1.34
34.1
-10
4.09
104
2.56
65
1.02
26 4J-8996
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
79
Caterpillar High Pressure Hose Products
Komatsu Style Flange - 45° Elbow
XT-3™ ES Hose Permanent Couplings B
Komatsu Style Flange - 90° Elbow
C
D
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
8T-3710
0.500 12.7
-8
1.34
34.1
-10
3.31
84
1.62
41
1.61
41 4J-8996
221-05411
0.625 15.9
-10
1.34
34.1
-10
3.58
91
2.05
52
2.17
55 4J-8996
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
A
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B
ORFS Male
C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
187-0964
0.375
9.5
-6
11/16
- 16
-6
3.78
96
2.12
54 6V-8397
187-0965
0.500
12.7
-8
13/16
- 16
-8
2.72
69
1.22
31 6V-8398
187-0966
0.625
15.9
-10
1 - 14
-10
3.07
78
1.42
36 7J-9108
187-0967
0.750
19.1
-12
1 3/16 - 12
-12
3.78
96
2.02
51 6V-9746
184-7201
1.000
25.4
-16
1 7/16 - 12
-16
4.13
105
2.16
55 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Male Bulkhead B C
PART NUMBER
193-8590
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
0.375
9.5
HOSE DASH SIZE
-6
A THREAD SIZE 11/16
- 16
A THREAD DASH SIZE
-6
B LENGTH (in) (mm)
3.27
83
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
1.85
47 6V-8397
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel B C
A
80
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
6V-9961
0.375
9.5
-6
11/16
- 16
-6
2.87
73
1.33
34 6V-8397
221-05371
0.375
9.5
-6
13/16
- 16
-8
2.87
73
1.38
35 6V-8398
6V-9965
0.500
12.7
-8
13/16
- 16
-8
3.03
77
1.48
38 6V-8398
123-5235
0.625
15.9
-10
11/16
- 16
-6
2.91
74
1.39
35 6V-8397
8T-1710
0.625
15.9
-10
1 - 14
-10
3.03
77
1.49
38 7J-9108
243-46461
0.750
19.1
-12
1 - 14
-10
2.87
73
1.34
34
6V-9969
0.750
19.1
-12
1 3/16 - 12
-12
3.54
90
1.75
44 6V-9746
123-5234
0.750
19.1
-12
1 7/16 - 12
-16
3.46
88
1.96
50 5K-9090
6V-9973
1.000
25.4
-16
1 7/16 - 12
-16
3.74
95
1.78
45 5K-9090
123-5238
1.000
25.4
-16
1 11/16 - 12
-20
3.86
98
2.16
55 6V-8400
XT-3™ ES Hose Permanent Couplings ORFS Female Swivel (continued) B C
PART NUMBER
A
228-29841
HOSE I.D. (in) (mm)
1.250
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-20
1 11/16 - 12
-20
31.8
B LENGTH (in) (mm)
3.78
96
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
1.97
50 6V-8400
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
ORFS Female Swivel - 30° Elbow B C
PART NUMBER D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE 13/16
- 16
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
176-9203
0.500
12.7
-8
-8
4.21
107
2.68
68
0.54
14 6V-8398
176-92041
0.625
15.9
-10
1 - 14
-10
4.84
123
3.43
87
0.71
18 7J-9108
123-5240
0.750
19.1
-12
1 3/16 - 12
-12
3.74
95
2.22
56
0.45
11 6V-9746
176-9205
0.750
19.1
-12
1 3/16 - 12
-12
5.16
131
3.39
86
0.69
18 6V-9746
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
ORFS Female Swivel - 45° Elbow B C
D
A
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
0.375
9.5
-6
11/16
- 16
-6
3.70
94
2.17
55
0.69
18 6V-8397
221-05201
0.375
9.5
-6
13/16
- 16
-8
3.15
80
1.65
42
0.59
15 6V-8398
6V-9966
0.500
12.7
-8
13/16
- 16
-8
4.13
105
2.59
66
0.85
22 6V-8398
8T-1711
0.625
15.9
-10
1 - 14
-10
4.69
119
3.12
79
1.00
26 7J-9108
6V-9970
0.750
19.1
-12
1 3/16 - 12
-12
4.96
126
3.18
81
1.10
28 6V-9746
7/16
123-5237
0.750
19.1
-12
1
- 12
-16
4.41
112
2.87
73
0.94
24 5K-9090
6V-9974
1.000
25.4
-16
1 7/16 - 12
-16
5.63
143
3.67
93
1.26
32 5K-9090
123-52391
1.000
25.4
-16
1 11/16 - 12
-20
5.39
137
3.69
94
1.26
32 6V-8400
221-05221
1.250
31.8
-20
1 11/16 - 12
-20
6.50
165
4.57
116
0.98
25 6V-8400
221-05241
1.500
38.1
-24
2 - 12
-24
6.02
153
4.06
103
1.06
27 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
81
Caterpillar High Pressure Hose Products
6V-9962
XT-3™ ES Hose Permanent Couplings ORFS Female Swivel - 90° Elbow
B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
6V-9963
0.375
9.5
-6
11/16
- 16
-6
2.91
74
1.38
35
1.38
35 6V-8397
6V-9964
0.375
9.5
-6
11/16
- 16
-6
2.91
74
1.39
35
2.72
69 6V-8397
150-7999
0.500
12.7
-8
13/16
- 16
-8
3.50
89
2.05
52
1.18
30 6V-8398
6V-9967
0.500
12.7
-8
13/16
- 16
-8
3.15
80
1.61
41
1.71
44 6V-8398
150-9382
0.500
12.7
-8
13/16
- 16
-8
3.70
94
2.26
58
2.56
65 6V-8398
6V-9968
0.500
12.7
-8
13/16
- 16
-8
3.11
79
1.58
40
3.27
83 6V-8398
198-7170
0.500
12.7
-8
13/16
- 16
-8
3.43
87
2.60
66
3.30
84 6V-8398
8T-1712
0.625
15.9
-10
1 - 14
-10
3.50
89
1.94
49
2.09
53 7J-9108
8T-1713
0.625
15.9
-10
1 - 14
-10
3.58
91
1.81
46
3.78
96 7J-9108
6V-9971
0.750
19.1
-12
1 3/16 - 12
-12
3.70
94
1.91
48
2.28
58 6V-9746
6V-9972
0.750
19.1
-12
1 3/16 - 12
-12
3.70
94
1.91
48
4.21
107 6V-9746
123-5236
0.750
19.1
-12
1 7/16 - 12
-16
4.33
110
2.81
71
2.28
58 5K-9090
6V-9975
1.000
25.4
-16
1 7/16 - 12
-16
4.33
110
2.37
60
2.68
68 5K-9090
6V-9976
1.000
25.4
-16
1 7/16 - 12
-16
4.33
110
2.37
60
4.92
125 5K-9090
221-05361
1.250
31.8
-20
1 11/16 - 12
-20
6.46
164
4.52
115
2.52
64 6V-8490
221-05281
1.250
31.8
-20
1 11/16 - 12
-20
6.46
164
4.52
115
5.08
129 6V-8490
221-05261
1.500
38.1
-24
2 - 12
-24
7.13
181
5.16
131
2.72
69 8T-0315
221-05271
1.500
38.1
-24
2 - 12
-24
7.13
181
5.16
131
5.55
141 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
Double Collet
Caterpillar High Pressure Hose Products
B C
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
238-1124
0.375
9.5
-6
5.12
130
1.77
45
8T-39531
0.500
12.7
-8
5.12
130
1.79
45
8T-3955
0.750
19.1
-12
5.35
136
1.78
45
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
Double Collet - 90° Elbow PART NUMBER
D
82
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
8T-3954
0.500
12.7
-8
3.35
85
1.66
42
3.33
85
8T-3956
0.750
19.1
-12
4.33
110
2.54
64
4.31
110
XT-3™ ES Hose Permanent Couplings B
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN20078)
C
THREAD A
HEX 1
HEX 2
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
221-05451
0.500
12.7
-8
M24 x 1.5
0.63
16
2.99
76
1.30
33 3E-4298
221-05461
0.625
15.9
-10
M30 x 2.0
0.79
20
3.15
80
1.65
42 3E-4299
221-05471
0.750
19.1
-12
M36 x 2.0
0.98
25
3.23
82
1.61
41 3E-6762
221-05181
1.250
31.8
-20
M52 x 2.0
1.50
38
4.13
105
2.20
56 3E-6764
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
JIS Metric 30° Flare Female Swivel (Komatsu Style) B C THREAD A
PART NUMBER
HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
155-28521
0.375
9.5
-6
M18 x 1.5
2.76
70
1.07
27
155-28531
0.500
12.7
-8
M22 x 1.5
2.83
72
1.17
30
221-05421
0.625
15.9
-10
M24 x 1.5
2.52
64
1.02
26
155-28541
0.750
19.1
-12
M30 x 1.5
3.19
81
1.39
35
155-28551
1.000
25.4
-16
M33 x 1.5
3.43
87
1.46
37
221-05431
1.250
31.8
-20
M36x1.5
3.54
90
1.59
40
221-05441
1.500
38.1
-24
M42x1.5
4.45
113
1.93
49
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
D
THREAD A
JIS Metric 30° Flare Female Swivel - 45° Elbow (Komatsu Style) PART NUMBER
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
0.375
9.5
-6
M18 x 1.5
3.82
97
2.52
64
243-46381
0.500
12.7
-8
M22 x 1.5
4.21
107
2.91
74
243-46401
0.625
15.9
-10
M24 x 1.5
3.90
99
2.36
60
243-46421
0.750
19.1
-12
M30 x 1.5
4.17
106
2.60
66
243-46441
1.000
25.4
-16
M33 x 1.5
5.08
129
3.23
82
Caterpillar High Pressure Hose Products
243-46361
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B C
JIS Metric 30° Flare Female Swivel - 90° Elbow (Komatsu Style)
D
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
243-46371
0.375
9.5
-6
M18 x 1.5
2.83
72
1.54
39
243-46391
0.500
12.7
-8
M22 x 1.5
2.95
75
1.65
42
243-46411
0.625
15.9
-10
M24 x 1.5
3.46
88
1.93
49
243-46431
0.750
19.1
-12
M30 x 1.5
3.66
93
2.13
54
83
XT-3™ ES Hose Permanent Couplings B
JIS Metric 30° Flare Female Swivel - 90° Elbow (Komatsu Style) (continued)
C
D
PART NUMBER
243-46451
HOSE I.D. (in) (mm)
1.000
25.4
HOSE DASH SIZE
A THREAD SIZE
-16
M33 x 1.5
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
5.08
129
3.23
82
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
A
B
THREAD A
BSPP Spherical Seat - Female Swivel
C
PART NUMBER HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
221-04931
0.375
9.5
-6
3/8
- 19
-6
2.44
62
0.94
24
221-04941
0.500
12.7
-8
1/2
- 14
-8
2.99
76
1.30
33
221-04951
0.625
15.9
-10
5/8
- 14
-10
2.56
65
1.02
26
9X-76431
0.625
15.9
-10
3/4
- 14
-12
4.13
105
2.37
60
221-04531
0.750
19.1
-12
3/4
- 14
-12
2.99
76
1.18
30
221-04971
1.000
25.4
-16
1 - 11
-16
3.03
77
1.18
30
221-04981
1.250
31.8
-20
1 1/4 - 11
-20
3.98
101
2.02
51
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B
BSPP Spherical Seat - Female Swivel - 45° Elbow
C
D
THREAD A
PART NUMBER
Caterpillar High Pressure Hose Products
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
221-04811
0.375
9.5
-6
3/8
- 19
-6
3.35
85
1.85
47
0.79
20
221-04821
0.500
12.7
-8
1/2
- 14
-8
3.50
89
1.81
46
0.79
20
221-04831
0.625
15.9
-10
5/8
- 14
-10
3.86
98
2.32
59
0.87
22
221-04841
0.750
19.1
-12
3/4
- 14
-12
4.21
107
2.60
66
1.14
29
221-04851
1.000
25.4
-16
1 - 11
-16
5.16
131
3.31
84
1.18
30
221-04861
1.250
31.8
-20
1 1/4 - 11
-20
6.46
164
4.00
102
1.54
39
1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
B
BSPP Spherical Seat - Female Swivel - 90° Elbow
D
C
HEX THREAD A
84
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
221-04871
0.375
9.5
-6
3/8
- 19
-6
2.83
72
1.34
34
1.46
37
221-04881
0.500
12.7
-8
1/2
- 14
-8
3.07
78
1.38
35
1.50
38
221-04891
0.625
15.9
-10
5/8
- 14
-10
3.46
88
1.93
49
1.73
44
221-04901
0.750
19.1
-12
3/4
- 14
-12
3.66
93
2.09
53
2.32
59
221-04911
1.000
25.4
-16
1 - 11
-16
4.84
123
2.99
76
2.56
65
XT-3™ ES Hose Permanent Couplings B
BSPP Spherical Seat - Female Swivel - 90° Elbow (continued)
D
C
HEX THREAD A
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
221-04921
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
1.250 31.8 -20 1 1/4 - 11 -20 5.16 131 3.18 81 3.19 1 Note: Couplings shaded in gray have different crimp diameters than standard CAT couplings. Please refer to IRM
81
numbers PELM1061 and PELJ0220 for additional information and crimping procedures.
Caterpillar High Pressure Hose Products
85
XT-3™ ES Hose Captive Flange Couplings B
Captive Flange - SAE Code 61 - 2 Hole
C
A
F
E
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
C E-F CUT-OFF FLANGE HOLE FACTOR SPACING (in) (mm) (mm) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
5S-9939
0.500 12.7
-8
1.19
30.2
-8
3.58
91
1.92
49
60.00
27.00
6V-4654
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
64.30
32.10
7S-0631
1.000 25.4
-16
1.75
44.5
-16
4.13
105
2.17
55
64.30
32.10
7S-0614
1.000 25.4
-16
1.75
44.5
-16
4.13
105
2.17
55
63.50
31.80
7S-0592
1.000 25.4
-16
1.75
44.5
-16
4.13
105
2.17
55
73.00
36.50
6K-8325
1.000 25.4
-16
1.75
44.5
-16
5.35
136
3.37
86
64.30
32.10
7S-1074
1.250 31.8
-20
2.00
50.8
-20
5.24
133
2.87
73
82.50
41.30
5S-38081
1.250 31.8
-20
2.25
57.2
5.24
133
2.87
73
82.60
41.30
8S-8869
1.500 38.1
-24
2.37
60.3
5.71
145
3.08
78
82.50
41.30
-24
B LENGTH (in) (mm)
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. 1 Special Head Size
B
Captive Flange - SAE Code 61 - 2 Hole - 22 1/2° Elbow
C
D A F
PART NUMBER
HOSE I.D. (in) (mm)
7S-1809
1.000 25.4
HOSE DASH SIZE
-16
A HEAD SIZE (in) (mm)
1.75
44.5
A FLANGE DASH SIZE
-16
B LENGTH (in) (mm)
4.84
123
C CUT-OFF FACTOR (in) (mm)
2.88
73
E-F D FLANGE HOLE DROP SPACING (in) (mm) (mm) (mm)
0.43
11
73.00 36.50
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
E
B
Captive Flange - SAE Code 61 - 2 Hole - 30° Elbow
C
D
Caterpillar High Pressure Hose Products
A F
HOSE DASH SIZE
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
E-F D FLANGE HOLE DROP SPACING (in) (mm) (mm) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
6V-4663
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
0.59
15
64.30 32.10
7S-0685
1.000 25.4
-16
1.75
44.5
-16
4.37
111
2.41
61
0.63
16
64.30 32.10
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. E
B
Captive Flange - SAE Code 61 - 2 Hole - 67 1/2° Elbow
C
D
A
F
PART NUMBER
HOSE I.D. (in) (mm)
6V-4674
0.750 19.1
HOSE DASH SIZE
-12
A HEAD SIZE (in) (mm)
1.50
38.1
A FLANGE DASH SIZE
-12
B LENGTH (in) (mm)
4.09
104
C CUT-OFF FACTOR (in) (mm)
2.30
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
E
86
58
E-F D FLANGE HOLE DROP SPACING (in) (mm) (mm) (mm)
1.59
41
64.30 32.10
XT-3™ ES Hose Captive Flange Couplings B
Captive Flange - SAE Code 61 - 2 Hole - 90° Elbow
C
A F
A HEAD SIZE (in) (mm)
HOSE DASH SIZE
A FLANGE DASH SIZE
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
E-F D FLANGE HOLE DROP SPACING (in) (mm) (mm) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
6V-4683
0.750 19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
2.13
54
64.30 32.10
5S-2108
1.000 25.4
-16
1.75
44.5
-16
4.84
123
2.86
73
2.26
58
64.30 32.10
5P-3923
1.000 25.4
-16
1.75
44.5
-16
4.72
120
2.74
70
4.63
118 63.50 31.80
D
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
E
B
Captive Fixed Flange - 2 Hole
C
F G
E
HOSE DASH SIZE
A FLANGE DASH SIZE
1.000 25.4
-16
-16
4.92
125
2.96
75
64.30
32.10
13.5
1.000 25.4
-16
-16
4.92
125
2.96
75
70.80
38.70
13.5
7S-1217
1.000 25.4
-16
-16
4.92
125
2.96
75
82.60
41.30
14.3
7S-1851
1.250 31.8
-20
-16
5.31
135
2.96
75
82.60
41.30
14.3
PART NUMBER
HOSE I.D. (in) (mm)
7S-1150 7S-1212
C E-F CUT-OFF FLANGE HOLE FACTOR SPACING (in) (mm) (mm) (mm)
B LENGTH (in) (mm)
G BOLT HOLE DIAMETER (mm)
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Captive Flange - SAE Code 61 - 4 Hole B C
PART NUMBER
A
9S-0681
HOSE I.D. (in) (mm)
0.500
12.7
HOSE DASH SIZE
-8
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
1.34
34.1
B LENGTH (in) (mm)
4.13
105
C CUT-OFF FACTOR (in) (mm)
2.46
63
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Captive Flange - SAE Code 61 - 4 Hole - 22 1/2° Elbow
C
PART NUMBER D
5P-0922 A
HOSE I.D. (in) (mm)
1.000
25.4
HOSE DASH SIZE
-16
A HEAD SIZE (in) (mm)
1.75
44.5
A FLANGE DASH SIZE
-16
B LENGTH (in) (mm)
4.84
123
C CUT-OFF FACTOR (in) (mm)
2.88
73
D DROP (in) (mm)
0.43
11
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
87
Caterpillar High Pressure Hose Products
B
XT-3™ ES Hose Captive Flange Couplings B
Captive Flange - SAE Code 61 - 4 Hole - 67 1/2° Elbow
C
PART NUMBER
9S-6691
D
HOSE I.D. (in) (mm)
1.250
31.8
HOSE DASH SIZE
-20
A HEAD SIZE (in) (mm)
2.00
50.8
A FLANGE DASH SIZE
-20
B LENGTH (in) (mm)
6.14
156
C CUT-OFF FACTOR (in) (mm)
3.79
96
D DROP (in) (mm)
2.56
65
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
B C
Captive Flange - SAE Code 61 - 4 Hole - 90° Elbow PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
B LENGTH (in) (mm)
Caterpillar High Pressure Hose Products
88
D DROP (in) (mm)
6V-4684
0.750
19.1
-12
1.50
38.1
-12
3.94
100
2.16
55
2.13
54
2P-9921
1.250
31.8
-20
2.00
50.8
-20
5.98
152
3.63
92
3.58
91
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
C CUT-OFF FACTOR (in) (mm)
DIN Four-Wire Spiral Hose (1956) and Couplings DIN Four-Wire Spiral Hose (1956)....................................................................................... 90 Permanent Couplings (1956)............................................................................................... 91 NPTF................................................................................................................................ 91 JIC 37°.............................................................................................................................. 91 SAE Code 61 Flange........................................................................................................ 92 SAE Code 62 Flange........................................................................................................ 94 Komatsu Style Flange...................................................................................................... 96 ORFS................................................................................................................................96 DIN 20078........................................................................................................................ 97 JIS - BSPP........................................................................................................................99
Caterpillar High Pressure Hose Products
89
DIN Four-Wire Spiral Hose (1956) Cat DIN Four-Wire Spiral Hose (1956) CAT 1956 DIN
Meets the requirements of DIN 20023 4SP. Note: Sold by the inch. PART NUMBER
HOSE I.D. (in) (mm)
9.5
HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
HOSE DASH SIZE
DN SIZE
-6
10
0.84
21.4 25,817
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
178,000
6454
44,500
7.01
178
9.02
229
116-6796
0.375
116-6797
0.500 12.7
-8
12
0.97
24.6 24,076
166,000
6019
41,500
116-6798
0.625 15.9
-10
16
1.11
28.2 20,305
140,000
5076
35,000 10.00 254
116-6799
0.750 19.1
-12
20
1.27
32.2 20,305
140,000
5076
35,000 12.01 305
116-6800
1.000 25.4
-16
25
1.56
39.7 16,244
112,000
4061
28,000 13.50 343
116-6801
1.250 31.8
-20
32
2.00
50.8 12,183
84,000
3046
21,000 17.99 457
116-6802
1.500 38.1
-24
40
2.25
57.2 10,733
74,000
2683
18,500 22.01 559
116-6804
2.000 50.8
-32
50
2.75
69.8
66,000
2393
16,500 25.98 660
9572
Construction: Synthetic rubber tube; four spiral plies of high tensile steel wire reinforcements separated by layers of synthetic rubber. Oil and weather resistant synthetic rubber cover. Application: Very high-pressure service with petroleum base hydraulic fluids. MSHA approved cover. Temperature Range: -40° F to +212° F (-40° C to +100° C). Couplings: Crimp-on permanent, skive type, see Permanent Couplings (1956) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover needs to be removed before attaching couplings.
Caterpillar High Pressure Hose Products
1 Centerline of Hose
90
Permanent Couplings (1956) B
NPTF Male
C
THREAD
PART NUMBER A
HEX
B
HEX
B C THREAD A
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
0.375
9.5
-6
3/8
- 18
-6
2.36
60
0.87
22
228-2952
0.500
12.7
-8
3/8
- 18
-6
2.64
67
1.14
29
116-0606
0.500
12.7
-8
1/2
- 14
-8
2.80
71
1.10
28
228-2953
0.500
12.7
-8
3/4
- 14
-12
2.80
71
1.30
33
116-0607
0.625
15.9
-10
1/2
- 14
-8
3.15
80
1.42
36
116-0608
0.625
15.9
-10
3/4
- 14
-12
3.15
80
1.42
36
116-0609
0.750
19.1
-12
3/4
- 14
-12
3.07
78
1.26
32
116-0610
1.000
25.4
-16
1 - 11 1/2
-16
3.46
88
1.54
39
116-0611
1.250
31.8
-20
1 1/4 - 11 1/2
-20
3.78
96
1.81
46
116-0612
2.000
50.8
-32
2 - 11 1/2
-32
5.43
138
2.80
71
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
0.375
9.5
-6
9/16
- 18
-6
2.36
60
0.87
22
116-0499
0.500
12.7
-8
3/4
- 16
-8
2.76
70
1.06
27
- 14
-10
2.80
71
1.14
29
- 14
-10
3.19
81
1.42
36
228-2957
0.500
12.7
-8
7/8
116-0500
0.625
15.9
-10
7/8
116-0501
0.625
15.9
-10
1 1/16 - 12
-12
3.27
83
1.50
38
116-0502
0.750
19.1
-12
1 1/16 - 12
-12
3.19
81
1.38
35
116-0503
1.000
25.4
-16
1 5/16 - 12
-16
3.50
89
1.57
40
116-0504
1.250
31.8
-20
1 5/8 - 12
-20
3.74
95
1.77
45
A THREAD SIZE
A THREAD DASH SIZE
JIC 37° Female Swivel HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
116-0473
0.375
9.5
-6
9/16
- 18
-6
2.24
57
0.75
19
116-0474
0.375
9.5
-6
3/4
- 16
-8
2.20
56
0.71
18
116-0475
0.500
12.7
-8
3/4
- 16
-8
2.44
62
0.75
19
7/8
- 14
-10
2.44
62
0.75
19
-12
2.52
64
0.87
22
116-0476
0.500
12.7
-8
228-2958
0.500
12.7
-8
116-0479
0.625
15.9
-10
7/8
- 14
-10
2.83
72
1.10
28
116-0478
0.625
15.9
-10
7/8
- 14
-12
2.87
73
1.14
29
228-2959
0.750
19.1
-12
7/8
- 14
-10
2.72
69
1.54
39
116-0480
0.750
19.1
-12
1 1/16 - 12
-12
2.80
71
0.98
25
228-2960
0.750
19.1
-12
1 5/16 - 12
-16
2.99
76
1.18
30
116-0481
1.000
25.4
-16
1 5/16 - 12
-16
3.19
81
1.22
31
1 1/16 - 12
5/8
116-0482
1.250
31.8
-20
1
- 12
-20
3.54
90
1.61
41
116-0483
1.500
38.1
-24
1 7/8 - 12
-24
4.80
122
2.32
59
116-0484
2.000
50.8
-32
2 1/2 - 12
-32
5.55
141
2.95
75
Caterpillar High Pressure Hose Products
HEX 1
HOSE I.D. (in) (mm)
116-0498
PART NUMBER HEX 2
A THREAD SIZE
116-0605
PART NUMBER A
HOSE DASH SIZE
JIC 37° Male
C
THREAD
HOSE I.D. (in) (mm)
91
Permanent Couplings (1956) B
JIC 37° Female Swivel - 45° Elbow
C
D
THREAD A
PART NUMBER HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
116-0485
0.375
9.5
-6
9/16
- 18
-6
2.99
76
1.50
38
0.55
14
228-2961
0.375
9.5
-6
3/4
- 16
-8
3.39
86
1.89
48
0.71
18
116-0486
0.500
12.7
-8
3/4
- 16
-8
3.58
91
1.89
48
0.67
17
- 14
-10
3.98
101
2.28
58
0.87
22
- 14
-10
4.09
104
2.32
59
0.87
22
228-2962
0.500
12.7
-8
7/8
116-0488
0.625
15.9
-10
7/8
116-0487
0.625
15.9
-10
1 1/16 - 12
-12
4.45
113
2.72
69
1.06
27
116-0489
0.750
19.1
-12
1 1/16 - 12
-12
4.49
114
2.68
68
1.06
27
228-2963
0.750
19.1
-12
1 5/16 - 12
-16
4.92
125
3.07
78
1.14
29
116-0490
1.000
25.4
-16
1 5/16 - 12
-16
5.16
131
3.19
81
1.14
29
116-0491
1.250
31.8
-20
1 5/8 - 12
-20
6.10
155
4.17
106
1.69
43
B
JIC 37° Female Swivel - 90° Elbow
D
C
PART NUMBER HEX
Caterpillar High Pressure Hose Products
THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
116-0477
0.375
9.5
-6
9/16
- 18
-6
2.72
69
1.22
31
1.10
28
228-2968
0.375
9.5
-6
9/16
- 18
-6
2.76
70
1.26
32
2.20
56
228-2965
0.375
9.5
-6
3/4
- 16
-8
3.07
78
1.54
39
1.38
35
116-0492
0.500
12.7
-8
3/4
- 16
-8
3.27
83
1.57
40
1.38
35
228-2966
0.500
12.7
-8
7/8
- 14
-10
3.54
90
1.85
47
1.77
45
116-0494
0.625
15.9
-10
7/8
- 14
-10
3.62
92
1.89
48
1.73
44
116-0493
0.625
15.9
-10
1 1/16 - 12
-12
3.94
100
2.20
56
2.05
52
228-2964
0.750
19.1
-12
1 1/16 - 12
-12
4.02
102
2.20
56
1.81
46
116-0495
0.750
19.1
-12
1 1/16 - 12
-12
4.02
102
2.20
56
2.05
52
228-2967
0.750
19.1
-12
1 5/16 - 12
-16
3.90
99
2.17
55
2.52
64 54
5/16
228-3033
1.000
25.4
-16
1
- 12
-16
5.00
127
3.11
79
2.13
116-0496
1.000
25.4
-16
1 5/16 - 12
-16
4.84
123
2.91
74
2.48
63
228-3034
1.000
25.4
-16
1 5/16 - 12
-16
4.88
124
2.99
76
4.37
111
116-0497
1.250
31.8
-20
1 5/8 - 12
-20
5.35
136
3.43
87
3.43
87
B C
SAE Code 61 Flange
A
PART NUMBER
92
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
116-0531
0.500
12.7
-8
1.19
30.2
-8
3.46
88
1.77
45 4J-5140
228-2939
0.500
12.7
-8
1.50
38.1
-12
2.56
65
0.87
22 4J-5267
116-0532
0.750
19.1
-12
1.50
38.1
-12
3.78
96
1.97
50 4J-5267
116-0562
0.750
19.1
-12
1.75
44.5
-16
3.11
79
1.30
33 4J-0520
116-0533
1.000
25.4
-16
1.75
44.5
-16
4.37
111
2.40
61 4J-0520
116-0534
1.000
25.4
-16
2.00
50.8
-20
4.41
112
2.48
63 4J-0522
116-0535
1.250
31.8
-20
2.00
50.8
-20
4.06
103
2.09
53 4J-0522
116-0536
1.250
31.8
-20
2.37
60.3
-24
4.17
106
2.20
56 4J-0524
116-0538
1.500
38.1
-24
2.37
60.3
-24
5.24
133
2.72
69 4J-0524
Permanent Couplings (1956) B
SAE Code 61 Flange (continued)
C
A
PART NUMBER
116-0539
HOSE I.D. (in) (mm)
2.000
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
50.8
-32
2.81
71.4
-32
B LENGTH (in) (mm)
5.98
152
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
3.35
85 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 22 1/2° Elbow B C
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
A
228-2941
0.500 12.7
-8
1.19
30.2
-8
3.39
86
1.69
43
0.35
9 4J-5140
228-3020
1.000 25.4
-16
1.75
44.5
-16
4.88
124
2.99
76
0.43
11 4J-0520
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 30° Elbow B C
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
A
228-2942
0.750 19.1
-12
1.50
38.1
-12
4.41
112
2.56
65
0.63
16 4J-5267
228-2943
1.000 25.4
-16
1.75
44.5
-16
5.04
128
3.11
79
0.63
16 4J-0520
228-3035
1.000 25.4
-16
2.00
50.8
-20
5.08
129
3.15
80
0.67
17 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 45° Elbow
D
A
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0541
0.500 12.7
-8
1.19
30.2
-8
3.46
88
1.77
45
0.79
20 4J-5140
228-2944
0.500 12.7
-8
1.50
38.1
-20
3.50
89
1.85
47
0.83
21 4J-0522
116-0543
0.750 19.1
-12
1.50
38.1
-12
4.49
114
2.68
68
0.98
25 4J-5267
228-2945
0.750 19.1
-12
1.75
44.5
-16
4.53
115
2.72
69
0.98
25 4J-0520
228-2946
1.000 25.4
-16
2.00
50.8
-8
5.24
133
3.31
84
1.10
28 4J-5140
116-0544
1.000 25.4
-16
1.75
44.5
-16
5.16
131
3.23
82
1.02
26 4J-0520
116-0545
1.250 31.8
-20
2.00
50.8
-20
5.43
138
3.50
89
1.14
29 4J-0522
116-0547
1.500 38.1
-24
2.37
60.3
-24
6.46
164
3.94
100
1.42
36 4J-0524
116-0548
2.000 50.8
-32
2.81
71.4
-32
7.91
201
5.28
134
2.01
51 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
93
Caterpillar High Pressure Hose Products
B C
Permanent Couplings (1956) SAE Code 61 Flange - 60° Elbow B C
D
PART NUMBER A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
228-2947
0.500 12.7
-8
1.19
30.2
-8
3.50
89
1.81
46
1.10
28 4J-5140
228-2948
0.750 19.1
-12
1.50
38.1
-12
4.53
115
2.72
69
1.38
35 4J-5267
228-3030
0.750 19.1
-12
1.75
44.5
-16
4.53
115
2.72
69
1.38
35 4J-0520
228-2949
1.000 25.4
-16
1.75
44.5
-16
5.16
131
3.23
82
1.54
39 4J-0520
228-3036
1.000 25.4
-16
2.00
50.8
-20
5.20
132
3.27
83
1.57
40 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 67 1/2° Elbow B C
D
PART NUMBER A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
228-3026
0.750 19.1
-12
1.50
38.1
-12
4.49
114
2.68
68
1.57
40 4J-5267
228-3031
0.750 19.1
-12
1.75
44.5
-16
4.49
114
2.68
68
1.57
40 4J-0520
228-2950
1.000 25.4
-16
1.75
44.5
-16
5.16
131
3.27
83
1.73
44 4J-0520
228-3037
1.000 25.4
-16
2.00
50.8
-20
5.20
132
3.27
83
1.81
46 4J-0522
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
SAE Code 61 Flange - 90° Elbow
C
D
PART NUMBER
Caterpillar High Pressure Hose Products
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0550
0.500 12.7
-8
1.19
30.2
-8
3.27
83
1.57
40
1.61
41 4J-5140
228-2951
0.500 12.7
-8
1.50
38.1
-12
3.31
84
1.61
41
1.69
43 4J-5267
116-0551
0.750 19.1
-12
1.50
38.1
-12
4.37
111
2.56
65
2.09
53 4J-5267
116-0552
0.750 19.1
-12
1.75
44.5
-16
4.37
111
2.56
65
2.09
53 4J-0520
116-0554
1.000 25.4
-16
1.75
44.5
-16
4.88
124
2.95
75
2.40
61 4J-0520
116-0555
1.000 25.4
-16
2.00
50.8
-20
4.84
123
2.91
74
2.36
60 4J-0522
116-0557
1.250 31.8
-20
2.00
50.8
-20
5.35
136
3.43
87
2.60
66 4J-0522
116-0558
1.250 31.8
-20
2.37
60.3
-24
5.35
136
3.43
87
2.60
66 4J-0524
116-0559
1.500 38.1
-24
2.37
60.3
-24
6.42
163
3.94
100
3.11
79 4J-0524
116-0561
2.000 50.8
-32
2.81
71.4
-32
7.48
190
4.84
123
4.49
114 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
SAE Code 62 Flange Use Code 62 Split Flanges with these couplings.
A
PART NUMBER
94
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
116-0563
0.375
9.5
-6
1.25
31.8
-8
3.43
87
1.93
49 4J-5140
116-0565
0.500
12.7
-8
1.25
31.8
-8
3.58
91
1.93
49 4J-5140
116-0566
0.500
12.7
-8
1.63
41.3
-12
3.58
91
1.93
49 4J-5267
116-0568
0.625
15.9
-10
1.25
31.8
-8
3.74
95
1.97
50 4J-5140
Permanent Couplings (1956) B
SAE Code 62 Flange (continued)
C
Use Code 62 Split Flanges with these couplings. A
PART NUMBER
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
116-0570
0.625
15.9
-10
1.63
41.3
-12
3.86
98
2.13
54 4J-5267
116-0571
0.750
19.1
-12
1.63
41.3
-12
3.86
98
2.05
52 4J-5267
116-0572
0.750
19.1
-12
1.87
47.6
-16
3.86
98
2.05
52 4J-0520
116-0575
1.000
25.4
-16
1.63
41.3
-12
4.29
109
2.36
60 4J-5267
116-0576
1.000
25.4
-16
1.87
47.6
-16
4.21
107
2.28
58 4J-0520
116-0577
1.000
25.4
-16
2.13
54.0
-20
4.69
119
2.72
69 4J-0522
116-0578
1.250
31.8
-20
2.13
54.0
-20
4.25
108
2.28
58 4J-0522
116-0579
1.250
31.8
-20
2.50
63.5
-24
4.25
108
2.28
58 4J-0524
116-0580
1.500
38.1
-24
2.50
63.5
-24
5.79
147
3.31
84 4J-0524
116-0581
2.000
50.8
-32
3.13
79.4
-32
6.14
156
3.54
90 4J-0527
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
SAE Code 62 Flange - 45° Elbow
C
Use Code 62 Split Flanges with these couplings.
D
A
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0582
0.500 12.7
-8
1.25
31.8
-8
3.50
89
1.89
48
0.87
22 4J-5140
116-0583
0.625 15.9
-10
1.25
31.8
-8
4.13
105
2.36
60
0.87
22 4J-5140
116-0584
0.625 15.9
-10
1.63
41.3
-12
4.21
107
2.48
63
0.94
24 4J-5267
116-0585
0.750 19.1
-12
1.63
41.3
-12
4.61
117
2.80
71
1.10
28 4J-5267
116-0586
0.750 19.1
-12
1.87
47.6
-16
4.61
117
2.80
71
1.10
28 4J-0520
116-0587
1.000 25.4
-16
1.87
47.6
-16
5.39
137
3.43
87
1.26
32 4J-0520
116-0588
1.000 25.4
-16
2.13
54.0
-20
5.39
137
3.43
87
1.26
32 4J-0522
116-0589
1.250 31.8
-20
2.13
54.0
-20
5.63
143
3.70
94
1.38
35 4J-0522
116-0590
1.500 38.1
-24
2.50
63.5
-24
6.85
174
4.37
111
1.81
46 4J-0524
116-0591
2.000 50.8
-32
3.13
79.4
-32
8.03
204
5.43
138
2.17
55 4J-0527
SAE Code 62 Flange - 90° Elbow B C
Use Code 62 Split Flanges with these couplings.
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0592
0.375
9.5
-6
1.25
31.8
-8
2.99
76
1.50
38
1.61
41 4J-5140
116-0593
0.500 12.7
-8
1.25
31.8
-8
3.27
83
1.57
40
1.73
44 4J-5140
116-0594
0.625 15.9
-10
1.25
31.8
-8
3.78
96
2.01
51
1.73
44 4J-5140
116-0595
0.625 15.9
-10
1.63
41.3
-12
3.78
96
2.01
51
1.85
47 4J-5267
116-0635
0.625 15.9
-10
1.63
41.3
-12
3.78
96
2.01
51
3.35
85 4J-5267
116-0596
0.750 19.1
-12
1.63
41.3
-12
4.33
110
2.56
65
2.28
58 4J-5267
116-0597
0.750 19.1
-12
1.87
47.6
-16
4.33
110
2.56
65
2.28
58 4J-0520
116-0598
1.000 25.4
-16
1.63
41.3
-12
4.65
118
2.72
69
2.28
58 4J-5267
116-0599
1.000 25.4
-16
1.87
47.6
-16
4.84
123
2.91
74
2.72
69 4J-0520
A
95
Caterpillar High Pressure Hose Products
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Permanent Couplings (1956) SAE Code 62 Flange - 90° Elbow (continued) Use Code 62 Split Flanges with these couplings.
B C
D
PART NUMBER
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0600
1.000 25.4
-16
2.13
54.0
-20
4.84
123
2.91
74
2.72
69 4J-0522
116-0601
1.250 31.8
-20
2.13
54.0
-20
5.35
136
3.43
87
2.91
74 4J-0522
116-0602
1.250 31.8
-20
2.50
63.5
-24
5.35
136
3.43
87
2.91
74 4J-0524
116-0603
1.500 38.1
-24
2.50
63.5
-24
6.34
161
3.82
97
3.74
95 4J-0524
116-0604
2.000 50.8
-32
3.13
79.4
-32
7.48
190
4.84
123
4.65
118 4J-0527
A
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Komatsu Style Flange
B C
A
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
228-2940
0.500
12.7
-8
1.34
34.1
-10
3.86
98
2.17
55 4J-8996
228-3021
0.625
15.9
-10
1.34
34.0
-10
3.98
101
2.20
56 4J-8996
ORFS Female Swivel B THREAD A
C
PART NUMBER
Caterpillar High Pressure Hose Products
HEX 2
HEX 1
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
116-0613
0.375
9.5
-6
11/16
- 16
-6
2.60
66
1.14
29 6V-8397
116-0614
0.375
9.5
-6
13/16
- 16
-8
2.60
66
1.14
29 6V-8398
13/16
- 16
116-0615
0.500
12.7
-8
-8
2.91
74
1.22
31 6V-8398
228-2969
0.500
12.7
-8
1 - 14
-10
3.23
82
1.42
36 7J-9108
228-3014
0.500
12.7
-8
1 3/16 - 12
-12
3.23
82
1.54
39 6V-9746
116-0616
0.625
15.9
-10
1 - 14
-10
3.39
86
1.61
41 7J-9108
116-0637
0.625
15.9
-10
1 3/16 - 12
-12
3.46
88
1.73
44 6V-9746
116-0617
0.750
19.1
-12
1 3/16 - 12
-12
3.50
89
1.65
42 6V-9746
116-0618
0.750
19.1
-12
1 7/16 - 12
-16
3.62
92
1.81
46 5K-9090
116-0619
1.000
25.4
-16
1 7/16 - 12
-16
4.02
102
2.09
53 5K-9090
-20
3.94
100
2.01
51 2Y-2347
116-0620
1.000
25.4
-16
1
11/16
- 12
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
96
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
Permanent Couplings (1956) B
ORFS Female Swivel - 45° Elbow
C
D
THREAD A
PART NUMBER HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0621
0.375
9.5
-6
1 1/16 - 16
-6
2.80
71
1.81
46
0.59
15 6V-8397
116-0636
0.375
9.5
-6
13/16
- 16
-8
3.03
77
1.61
41
0.59
15 6V-8398
116-0622
0.500
12.7
-8
13/16
- 16
-8
3.46
88
1.77
45
0.59
15 6V-8398
228-2970
0.500
12.7
-8
1 - 14
-10
3.74
95
2.05
52
0.67
17 7J-9108
116-0623
0.625
15.9
-10
1 - 14
-10
3.86
98
1.77
45
0.63
16 7J-9108
116-0624
0.750
19.1
-12
1 3/16 - 12
-12
4.25
108
2.44
62
0.83
21 6V-9746
116-0625
1.000
25.4
-16
1 7/16 - 12
-16
4.92
125
2.99
76
0.91
23 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 90° Elbow B C
D
PART NUMBER HEX
THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0626
0.375
9.5
-6
11/16
- 16
-6
2.80
71
1.34
34
0.87
22 6V-8397
228-2971
0.375
9.5
-6
11/16
- 16
-6
3.03
77
1.50
38
1.50
38 6V-8397
230-4931
0.375
9.5
-6
11/16
- 16
-6
3.03
77
1.54
39
2.13
54 6V-8397
116-0627
0.375
9.5
-6
13/16
- 16
-8
2.72
69
1.22
31
1.14
29 6V-8398
116-0628
0.500
12.7
-8
13/16
- 16
-8
3.43
87
1.73
44
1.14
29 6V-8398
228-2972
0.500
12.7
-8
13/16
- 16
-8
3.50
89
1.85
47
1.61
41 6V-8398
228-2977
0.500
12.7
-8
13/16
- 16
-8
3.43
87
2.01
51
2.52
64 6V-8398
116-0629
0.625
15.9
-10
1 - 14
-10
3.62
92
1.89
48
1.26
32 7J-9108
228-2973
0.625
15.9
-10
1 - 14
-10
3.66
93
1.93
49
1.85
47 7J-9108
116-0630
0.750
19.1
-12
1 3/16 - 12
-12
4.49
114
2.80
71
1.89
48 6V-9746
228-2974
0.750
19.1
-12
1 3/16 - 12
-12
4.57
116
2.80
71
2.28
58 6V-9746 96 6V-9746
3/16
0.750
19.1
-12
1
- 12
-12
4.61
117
2.80
71
3.78
116-0631
0.750
19.1
-12
1 7/16 - 12
-16
4.76
121
2.95
75
2.20
56 5K-9090
228-3028
0.750
19.1
-12
1 7/16 - 12
-16
4.88
124
3.07
78
4.49
114 5K-9090
116-0632
1.000
25.4
-16
1 7/16 - 12
-16
5.16
131
3.19
81
2.20
56 5K-9090
228-2975
1.000
25.4
-16
1 7/16 - 12
-16
5.16
131
3.27
83
2.80
71 5K-9090
228-2979
1.000
25.4
-16
1 7/16 - 12
-16
5.16
131
3.27
83
4.49
114 5K-9090
116-0633
1.000
25.4
-16
1 11/16 - 12
-20
5.16
131
3.19
81
2.48
63 2Y-2347
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Metric Male - 24° Inverted Cone - Heavy Series (DIN 20078) B C
PART NUMBER
THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
116-0465
0.375
9.5
-6
M20 x 1.5
0.47
12
2.32
59
0.83
21 3E-4297
116-0466
0.375
9.5
-6
M22 x 1.5
0.55
14
2.40
61
0.91
23 1J-9671
116-0467
0.500
12.7
-8
M24 x 1.5
0.63
16
2.60
66
0.91
23 3E-4298
116-0468
0.625
15.9
-10
M30 x 2.0
0.79
20
3.11
79
1.38
35 3E-4299
116-0469
0.750
19.1
-12
M30 x 2.0
0.79
20
3.07
78
1.26
32 3E-4299
116-0470
0.750
19.1
-12
M36 x 2.0
0.98
25
3.15
80
1.34
34 3E-6762
116-0471
1.000
25.4
-16
M42 x 2.0
1.18
30
3.39
86
1.46
37 3E-6763
97
Caterpillar High Pressure Hose Products
228-2978
Permanent Couplings (1956) Metric Male - 24° Inverted Cone - Heavy Series (DIN 20078) (continued)
B C
PART NUMBER
116-0472 HEX
THREAD A
B
HEX 1
HEX 2
1.250
HOSE DASH SIZE
A THREAD SIZE
-20
M52 x 2.0
31.8
A TUBE O.D. (in) (mm)
1.50
38
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
B LENGTH (in) (mm)
3.70
94
1.77
45 3E-6764
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
C
THREAD A
HOSE I.D. (in) (mm)
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
B LENGTH (in) (mm)
116-0440
0.375
9.5
-6
M20 x 1.5
0.47
12
2.95
75
1.46
37 3E-4297
116-0441
0.375
9.5
-6
M22 x 1.5
0.55
14
3.15
80
1.65
42 7T-0508
116-0442
0.500
12.7
-8
M24 x 1.5
0.63
16
3.46
88
1.77
45 3E-4298
116-0443
0.625
15.9
-10
M30 x 2.0
0.79
20
3.78
96
2.01
51 3E-4299
116-0444
0.750
19.1
-12
M36 x 2.0
0.98
25
3.66
93
2.52
64 3E-6762
116-0445
1.000
25.4
-16
M36 x 2.0
0.98
25
3.35
85
1.42
36 3E-6762
116-0446
1.000
25.4
-16
M42 x 2.0
1.18
30
4.25
108
2.32
59 3E-6763
116-0447
1.250
31.8
-20
M52 x 2.0
1.50
38
4.57
116
2.64
67 3E-6764
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) - 45° Elbow
THREAD A
Caterpillar High Pressure Hose Products
D
PART NUMBER HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
116-0448
0.375
9.5
-6
M20 x 1.5
0.47
12
3.31
84
1.81
46
0.87
22 3E-4297
116-0449
0.375
9.5
-6
M22 x 1.5
0.55
14
3.31
84
1.81
46
0.87
22 7T-0508
116-0450
0.500 12.7
-8
M24 x 1.5
0.63
16
3.90
99
2.20
56
0.94
24 3E-4298
116-0451
0.625 15.9
-10
M30 x 2.0
0.79
20
4.33
110
2.56
65
1.10
28 3E-4299
116-0452
0.750 19.1
-12
M36 x 2.0
0.98
25
4.61
117
2.80
71
1.18
30 3E-6762
116-0453
1.000 25.4
-16
M42 x 2.0
1.18
30
5.91
150
3.94
100
1.65
42 3E-6763
116-0454
1.250 31.8
-20
M52 x 2.0
1.50
38
5.94
151
4.02
102
1.57
40 3E-6764
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
98
D DROP O-RING (in) (mm) SEAL
Permanent Couplings (1956) Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) - 90° Elbow
B C
THREAD A
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
116-0455
0.375
9.5
-6
M20 x 1.5
0.47
12
2.72
69
1.22
31
1.46
37 3E-4297
116-0456
0.375
9.5
-6
M22 x 1.5
0.55
14
2.72
69
1.22
31
1.46
37 7T-0508
116-0457
0.500 12.7
-8
M24 x 1.5
0.63
16
3.27
83
1.57
40
1.73
44 3E-4298
116-0458
0.625 15.9
-10
M30 x 2.0
0.79
20
3.62
92
1.89
48
2.17
55 3E-4299
116-0462
0.750 19.1
-12
M36 x 2.0
0.98
25
4.02
102
2.20
56
2.24
57 3E-6762
116-0463
1.000 25.4
-16
M42 x 2.0
1.18
30
5.12
130
3.19
81
3.19
81 3E-6763
116-0464
1.250 31.8
-20
M52 x 2.0
1.50
38
5.31
135
3.39
86
3.19
81 3E-6764
HEX
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
JIS Metric 30° Flare Female Swivel (Komatsu Style) B
C CUT-OFF FACTOR (in) (mm)
C THREAD A
PART NUMBER
HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
228-2954
0.375
9.5
-6
M18 x 1.5
2.24
57
0.75
19
228-2955
0.500
12.7
-8
M22 x 1.5
2.48
63
0.79
20
228-2956
0.750
19.1
-12
M30 x 1.5
3.11
79
1.34
34
228-3009
1.000
25.4
-16
M33 x 1.5
2.99
76
1.10
28
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
JIS Male B C
PART NUMBER
HEX
THREAD A
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
0.375
9.5
-6
3/8
- 19
-6
2.44
62
0.91
23
116-0524
0.500
12.7
-8
1/2
- 14
-8
2.76
70
1.06
27
116-0525
0.625
15.9
-10
5/8
- 14
-10
3.15
80
1.42
36
116-0527
0.750
19.1
-12
3/4
- 14
-12
3.27
83
1.46
37
116-0528
1.000
25.4
-16
1 - 11
-16
3.46
88
1.54
39
116-0530
1.250
31.8
-20
1 1/4 - 11
-20
3.94
100
2.01
51
BSPP Male - 60° Cone B C
THREAD A
Seal is required with a port connection only. No seal is required with a BSPP Female Swivel 60° cone or Spherical Seat.
HEX
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR DOWTY (in) (mm) SEAL
116-0638
0.375
9.5
-6
3/8
- 19
-6
2.44
62
0.94
24 6V-0406
116-0640
0.500
12.7
-8
1/2
- 14
-8
2.80
71
1.10
28 6V-0407
116-0641
0.625
15.9
-10
5/8
- 14
-10
3.15
80
1.42
36 8C-6504
116-0642
0.750
19.1
-12
3/4
- 14
-12
3.27
83
1.46
37 6V-0408
116-0643
1.000
25.4
-16
1 - 11
-16
3.46
88
1.54
39 6V-0409
116-0645
1.250
31.8
-20
1 1/4 - 11
-20
3.94
100
2.01
51 9X-7423
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
99
Caterpillar High Pressure Hose Products
116-0523
Permanent Couplings (1956) B
THREAD A
BSPP Spherical Seat - Female Swivel
C
PART NUMBER HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
116-0505
0.375
9.5
-6
3/8
- 19
-6
2.64
67
1.14
29
116-0506
0.500
12.7
-8
1/2
- 14
-8
2.99
76
1.30
33
116-0507
0.625
15.9
-10
5/8
- 14
-10
3.19
81
1.46
37
3/4
116-0508
0.750
19.1
-12
- 14
-12
2.99
76
1.18
30
116-0509
1.000
25.4
-16
1 - 11
-16
3.62
92
1.65
42
116-0510
1.250
31.8
-20
1 1/4 - 11
-20
3.98
101
2.01
51
B
BSPP Spherical Seat - Female Swivel - 45° Elbow
C
D
THREAD A
PART NUMBER
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
116-0511
0.375
9.5
-6
3/8
- 19
-6
3.23
82
1.73
44
0.79
20
116-0512
0.500
12.7
-8
1/2
- 14
-8
3.70
94
2.01
51
0.79
20
116-0513
0.625
15.9
-10
5/8
- 14
-10
4.13
105
2.40
61
0.87
22
116-0514
0.750
19.1
-12
3/4
- 14
-12
4.45
113
2.64
67
1.10
28
116-0515
1.000
25.4
-16
1 - 11
-16
5.20
132
3.27
83
1.14
29
116-0516
1.250
31.8
-20
1 1/4 - 11
-20
5.94
151
4.02
102
1.54
39
NOTE: Interchangeable with JIS 60° Cone Female Swivel.
B
BSPP Spherical Seat - Female Swivel - 90° Elbow
D
C
HEX
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
Caterpillar High Pressure Hose Products
THREAD A
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
116-0517
0.375
9.5
-6
3/8
- 19
-6
2.72
69
1.22
31
1.46
37
116-0518
0.500
12.7
-8
1/2
- 14
-8
3.27
83
1.57
40
1.54
39
116-0519
0.625
15.9
-10
5/8
- 14
-10
3.78
96
2.05
52
1.73
44
116-0520
0.750
19.1
-12
3/4
- 14
-12
3.74
95
1.93
49
2.28
58
116-0521
1.000
25.4
-16
1 - 11
-16
4.69
119
2.72
69
2.44
62
116-0522
1.250
31.8
-20
1 1/4 - 11
-20
5.39
137
3.43
87
3.19
81
NOTE: Interchangeable with JIS 60° Cone Female Swivel.
100
A THREAD DASH SIZE
Caterpillar Low and Medium Pressure Hose Products
101
Caterpillar Low and Medium Pressure Hose Products
Hydraulic and Suction Hose (716, 294, 844) and Couplings............................................. 103 One-Wire Braid Hose (716)............................................................................................ 104 Two-Wire Braid Hose (294)............................................................................................ 105 Hydraulic Suction Hose (844)......................................................................................... 106 Permanent Couplings (716, 294, 844)............................................................................107 NPTF...........................................................................................................................107 NPSM..........................................................................................................................108 STOR.......................................................................................................................... 108 JIC 37°........................................................................................................................ 109 SAE 45°...................................................................................................................... 112 SAE Code 61 Flange.................................................................................................. 114 Komatsu Style Flange................................................................................................. 117 ORFS.......................................................................................................................... 118 Double Collet.............................................................................................................. 121 Metric Standpipe......................................................................................................... 121 DIN 20078................................................................................................................... 122 JIS - BSPP.................................................................................................................. 125 French Gaz................................................................................................................. 127 French Metric.............................................................................................................. 128 Captive Flanges.......................................................................................................... 128
Caterpillar Low and Medium Pressure Hose Products
Caterpillar Low and Medium Pressure Hose Products
102
Hydraulic and Suction Hose (716, 294, 844) and Couplings
103
Caterpillar Low and Medium Pressure Hose Products
One-Wire Braid Hose (716)................................................................................................ 104 Two-Wire Braid Hose (294)................................................................................................ 105 Hydraulic Suction Hose (844)............................................................................................ 106 Permanent Couplings (716, 294, 844)............................................................................... 107 NPTF.............................................................................................................................. 107 NPSM............................................................................................................................. 108 STOR..............................................................................................................................108 JIC 37°............................................................................................................................ 109 SAE 45°.......................................................................................................................... 112 SAE Code 61 Flange...................................................................................................... 114 Komatsu Style Flange.................................................................................................... 117 ORFS..............................................................................................................................118 Double Collet.................................................................................................................. 121 Metric Standpipe.............................................................................................................121 DIN 20078...................................................................................................................... 122 JIS - BSPP......................................................................................................................125 French Gaz..................................................................................................................... 127 French Metric..................................................................................................................128 Captive Flanges..............................................................................................................128
Caterpillar Low and Medium Pressure Hose Products
One-Wire Braid Hose (716) One-Wire Braid Hose (716) Exceeds the requirement of SAE 100R1 Type AT. Meets European standards for dynamic working pressures and temperatures of DIN 20022 1SN. Note: Sold by the inch.
CATERPILLAR ® 716
HOSE I.D. (mm)
HOSE DASH SIZE
MAX. HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
SAE 100R1 Type AT MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
DIN 20022 1SN MAX. WORK. PRESS. (psi) (bar)
PART NUMBER
(in)
122-6867
0.250
6.4
-4
0.56
14.1
11,000
75,843
2750
18,961
4.02
102
3263
225
122-6869
0.375
9.5
-6
0.71
18.1
9000
62,053
2250
15,514
5.00
127
2611
180
122-6870
0.500
12.7
-8
0.85
21.5
8000
55,159
2000
13,790
7.01
178
2321
160
122-6871
0.625
15.9
-10
0.97
24.7
6000
41,369
1500
10,343
7.99
203
1885
130
122-6872
0.750
19.1
-12
1.13
28.6
5000
34,474
1250
8619
9.49
241
1523
105
122-6873
1.000
25.4
-16
1.44
36.6
4000
27,580
1000
6895
12.01
305
1276
88
122-6874
1.250
31.8
-20
1.76
44.8
2500
17,237
625
4310
16.50
419
914
63
122-6875
1.500
38.1
-24
2.05
52.0
2000
13,790
500
3448
20.00
508
725
50
122-6876
2.000
50.8
-32
2.59
65.9
1500
10,343
375
2586
25.00
635
580
40
Construction: Special high temperature synthetic rubber tube; single high tensile steel wire braid reinforcement. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Medium pressure service with high temperature petroleum base hydraulic fluids, hot oil, grease, lubricants, and crude oils. MSHA approved cover. U.S. Coast Guard 46CFR56.60-25C approved. Temperature Range: -40° F to +275° F (-40° C to +135° C) for petroleum based hydraulic fluids. -40° F to +275° F (-40° C to +135° C) for petroleum based DIN hydraulic fluids. +185° F Max (+85° C Max) for air, water, or water-glycol. -40° to +158° F (-40° C to +70° C) for all other applications. Couplings: Crimp-on permanent, non-skive type, see Permanent Couplings (716, 294, 844) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings. 1 Centerline of Hose
104
Two-Wire Braid Hose (294)
Exceeds the requirement of SAE 100R2 Type AT. Meets European standards for dynamic working pressures and temperatures of DIN 20022 2SN. Note: Sold by the inch.
HOSE I.D. (mm)
HOSE DASH SIZE
MAX. HOSE O.D. (in) (mm)
MIN. BURST PRESS. (psi) (kPa)
SAE 100R2 Type AT WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
DIN 20022 2SN MAX. WORK. PRESS. (psi) (bar)
PART NUMBER
(in)
122-6887
0.250
6.4
-4
0.62
15.7
20,000
137,896
5000
34,474
4.02
102
5802
400
122-6888
0.313
7.9
-5
0.68
17.3
17,000
117,211
4250
29,303
4.49
114
5076
350
122-6889
0.375
9.5
-6
0.78
19.7
16,000
110,317
4000
27,580
5.00
127
4786
330
122-6890
0.500
12.7
-8
0.91
23.1
14,000
96,527
3500
24,132
7.01
178
3989
275
124-7115
0.625
15.9
-10
1.04
26.3
11,000
75,843
2750
18,961
7.99
203
3626
250
122-6891
0.750
19.1
-12
1.19
30.2
9000
62,053
2250
15,514
9.49
241
3118
215
122-6892
1.000
25.4
-16
1.53
38.9
8000
55,159
2000
13,790
12.01
305
2393
165
122-6893
1.250
31.8
-20
1.95
49.6
6500
44,816
1625
11,204
16.50
419
1813
125
122-6894
1.500
38.1
-24
2.20
56.0
5000
34,474
1250
8619
20.00
508
1305
90
122-6895
2.000
50.8
-32
2.70
68.6
4500
31,027
1125
7757
25.00
635
1160
80
256-1388
2.500
63.5
-40
3.19
81.0
1600
11,032
400
2758
30.00
762
Construction: Synthetic rubber tube; two braids of special high tensile steel wire reinforcement separated by synthetic rubber layer. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: High pressure service with petroleum base hydraulic fluids, water-glycol and water-oil fire resistant hydraulic fluids, hot oil, grease, lubricants, crude and fuel oils, air and water. MSHA approved cover. U.S. Coast Guard 46CFR56.60-25C approved. Temperature Range: -40° F to +190° F (-40° C to +88° C) for water-glycol and water-oil fire resistant hydraulic fluids, hot oil, grease, lubricants, crude and fuel oils. +150° F Max (+66° C Max) for air and water. -40° F to +212° F (-40° C to +100° C) for all other applications. Couplings: Crimp-on permanent, non-skive type, see Permanent Couplings (716, 294, 844) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings. 1 Centerline of Hose
105
Caterpillar Low and Medium Pressure Hose Products
Two-Wire Braid Hose (294) CATERPILLAR ® 294
Caterpillar Low and Medium Pressure Hose Products
Hydraulic Suction Hose (844) Hydraulic Suction Hose (844) CATERPILLAR ® 844
Exceeds the requirement of SAE 100R4. Note: Sold by the inch.
(mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
34.9
1200
8274
300
2069
5.00
127
41.3
1000
6895
250
1724
5.98
152
2.00
50.8
800
5516
200
1379
7.99
203
-24
2.25
57.2
600
4137
150
1034
10.00
254
50.8
-32
2.75
69.9
400
2758
100
690
12.01
305
2.500
63.5
-40
3.13
79.5
800
5516
200
1379
14.02
356
3.000
76.2
-48
3.63
92.2
800
5516
200
1379
17.99
457
3.500
88.9
-56
4.17
105.9
800
5516
200
1379
20.98
533
HOSE I.D.
MAX. HOSE O.D.
(mm)
HOSE DASH SIZE
(in)
19.1
-12
1.37
1.000
25.4
-16
1.63
122-6907
1.250
31.8
-20
122-6908
1.500
38.1
122-6909
2.000
122-6910 122-6911 122-6912
PART NUMBER
(in)
122-6905
0.750
122-6906
MIN. BEND RADIUS 1 (in) (mm)
Construction: Special high temperature synthetic rubber tube; two textile fiber braids combined with wire spiraled throughout the textile reinforcement to prevent collapse under vacuum. Oil, weather, and abrasion resistant synthetic rubber outer cover. Application: Hydraulic system suction or return lines with petroleum base hydraulic fluids. MSHA approved cover. U.S. Coast Guard 46CFR56.60-25C approved. Temperature Range: -40°F to +275°F (-40°C to +135°C). Couplings: Crimp-on permanent, non-skive type, see Permanent Couplings (716, 294, 844) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings. 1 Centerline of Hose
106
Permanent Couplings (716, 294, 844) Caterpillar Low and Medium Pressure Hose Products
NPTF Male B C
PART NUMBER
THREAD A
HEX
B
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-1890
0.250
6.4
-4
1/8
- 27
-2
1.61
41
0.79
20
124-1891
0.250
6.4
-4
1/4
- 18
-4
1.89
48
1.07
27
124-1892
0.250
6.4
-4
3/8
- 18
-6
1.89
48
1.07
27
124-1894
0.250
6.4
-4
1/2
- 14
-8
2.13
54
1.30
33
124-1895
0.313
7.9
-5
1/4
- 18
-4
2.17
55
1.13
29
124-1896
0.375
9.5
-6
1/4
- 18
-4
2.13
54
1.12
29
124-1897
0.375
9.5
-6
3/8
- 18
-6
2.17
55
1.16
29
124-1898
0.375
9.5
-6
1/2
- 14
-8
2.32
59
1.34
34
124-1899
0.500
12.7
-8
3/8
- 18
-6
2.24
57
1.23
31
124-1900
0.500
12.7
-8
1/2
- 14
-8
2.40
61
1.41
36
124-1901
0.500
12.7
-8
3/4
- 14
-12
2.48
63
1.49
38
124-1902
0.625
15.9
-10
3/8
- 18
-6
2.20
56
1.22
31
124-1903
0.625
15.9
-10
1/2
- 14
-8
2.40
61
1.41
36
124-1904
0.625
15.9
-10
3/4
- 14
-12
2.48
63
1.48
38
124-1905
0.750
19.1
-12
1/2
- 14
-8
2.60
66
1.39
35
124-1906
0.750
19.1
-12
3/4
- 14
-12
2.68
68
1.44
37
124-1907
0.750
19.1
-12
-16
2.99
76
1.76
45
124-1908
1.000
25.4
-16
-12
3.03
77
1.53
39
124-1909
1.000
25.4
-16
1 - 11 1/2
-16
3.35
85
1.85
47
1/4
1/2
1 - 11 1/2 3/4
- 14
124-1910
1.250
31.8
-20
1
-20
3.70
94
2.09
53
124-1911
1.500
38.1
-24
1 1/2 - 11 1/2
- 11
-24
4.21
107
2.21
56
124-1912
2.000
50.8
-32
2 - 11 1/2
-32
4.72
120
2.57
65
A THREAD SIZE
A THREAD DASH SIZE
NPTF Male - Swivel
C
PART NUMBER
THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-1913
0.250
6.4
-4
1/8
- 27
-2
2.20
56
1.39
35
124-1914
0.250
6.4
-4
1/4
- 18
-4
2.36
60
1.54
39
124-1915
0.250
6.4
-4
3/8
- 18
-6
2.36
60
1.55
39
124-1916
0.375
9.5
-6
1/4
- 18
-4
2.64
67
1.63
42
124-1917
0.375
9.5
-6
3/8
- 18
-6
2.64
67
1.63
41
124-1918
0.375
9.5
-6
1/2
- 14
-8
2.91
74
1.92
49
124-1919
0.500
12.7
-8
3/8
- 18
-6
2.72
69
1.70
43
124-1920
0.500
12.7
-8
1/2
- 14
-8
2.99
76
1.99
51
124-1921
0.750
19.1
-12
3/4
- 14
-12
3.35
85
2.13
54
124-1922
1.000
25.4
-16
-16
3.86
98
2.38
61
1 - 11 1/2
107
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844) B
NPTF Male - Swivel - 90° Elbow
C
A
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-1923
0.250
6.4
-4
1/4
- 18
-4
1.57
40
0.75
19
1.66
42
154-0052
0.375
9.5
-6
3/8
- 18
-6
1.85
47
0.85
22
1.75
45
154-0054
0.500
12.7
-8
1/2
- 14
-8
2.01
51
1.02
26
2.13
54
-12
3/4
- 14
-12
2.28
58
1.29
33
2.59
66
154-0055
0.750
19.1
NPTF Female B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-1924
0.250
6.4
-4
1/8
- 27
-2
1.61
41
0.77
20
124-1925
0.250
6.4
-4
1/4
- 18
-4
1.93
49
1.09
28
154-0057
0.375
9.5
-6
1/4
- 18
-4
2.13
54
1.14
29
124-1926
0.375
9.5
-6
3/8
- 18
-6
2.17
55
1.15
29
154-0058
0.500
12.7
-8
3/8
- 18
-6
2.20
56
1.22
31
124-1927
0.500
12.7
-8
1/2
- 14
-8
2.48
63
1.48
38
154-0059
0.750
19.1
-12
3/4
- 14
-12
2.60
66
1.37
35
NPSM Female Swivel
B C
PART NUMBER
Thread A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
154-0060
0.250
6.4
-4
1/8
- 27
-2
1.61
41
0.79
20
154-0061
0.250
6.4
-4
1/4
- 18
-4
1.69
43
0.86
22
154-0062
0.375
9.5
-6
3/8
- 18
-6
1.97
50
0.98
25
154-0063
0.500
12.7
-8
1/2
- 14
-8
2.20
56
1.22
31
154-0064
0.750
19.1
-12
3/4
- 14
-12
2.40
61
1.20
31
124-1958
1.000
25.4
-16
1 - 11 1/2
-16
2.72
69
1.19
30
154-0066
1.250
31.8
-20
1 1/4 - 11 1/2
-20
2.91
74
1.33
34
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
STOR Male
B C
PART NUMBER THREAD A
108
HEX
HOSE I.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
124-1928
0.250
6.4
-4
7/16
- 20
-4
1.65
42
0.81
21 3J-7354
147-1719
0.250
6.4
-4
9/16
- 18
-6
1.69
43
0.88
22 3J-1907
124-1929
0.375
9.5
-6
9/16
- 18
-6
1.93
49
0.93
24 3J-1907
124-1930
0.375
9.5
-6
3/4
- 16
-8
2.09
53
1.10
28 3K-0360
- 16
-8
2.17
55
1.17
30 3K-0360
- 14
-10
2.17
55
1.17
30 2M-9780
-12
2.32
59
1.33
34 3D-2824
-10
2.17
55
1.16
30 2M-9780
124-1931
0.500
12.7
-8
3/4
124-1932
0.500
12.7
-8
7/8
147-1698
0.500
12.7
-8
147-1699
0.625
15.9
-10
1 1/16 - 12 7/8
- 14
Permanent Couplings (716, 294, 844) C
PART NUMBER THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
147-1720
0.625
15.9
-10
1 1/16 - 12
-12
2.32
59
1.33
34 3D-2824
124-1933
0.750
19.1
-12
1 1/16 - 12
-12
2.52
64
1.29
33 3D-2824
147-1700
1.000
25.4
-16
1 5/16 - 12
-16
2.95
75
1.45
37 7M-8485
Note: Refer to the Seal Section of this Guide for a complete list of seals and applications.
STOR Male - Swivel B C
PART NUMBER
THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
124-1934
0.375
9.5
-6
9/16
- 18
-6
2.64
67
1.65
42 3J-1907
202-2379
0.375
9.5
-6
9/16
- 18
-6
2.87
73
1.89
48 3J-1907
147-1701
0.375
9.5
-6
3/4
- 16
-8
2.52
64
1.51
38 3K-0360
147-1702
0.500
12.7
-8
3/4
- 16
-8
2.56
65
1.57
40 3K-0360
147-1703
0.500
12.7
-8
7/8
- 14
-10
2.76
70
1.74
44 2M-9780
154-0067
0.750
19.1
-12
-12
3.23
82
1.99
51 3D-2824
1 1/16 - 12
Note: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B A
STOR Male - Swivel - 90° Block
C
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-1935
0.375
9.5
-6
9/16
- 18
-6
1.85
47
0.85
22
1.78
45 3J-1907
154-0068
0.500
12.7
-8
3/4
- 16
-8
1.97
50
0.95
24
1.68
43 3K-0360
215-1952
1.000
25.4
-16
-16
2.87
73
1.33
34
2.50
64 7M-8485
1 5/16 - 12
Note: Refer to the Seal Section of this Guide for a complete list of seals and applications.
JIC 37° Male
B C
PART NUMBER
THREAD
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-1936
0.250
6.4
-4
7/16
- 20
-4
1.85
47
1.01
26
124-1937
0.250
6.4
-4
1/2
- 20
-5
1.81
46
1.00
25
124-1938
0.250
6.4
-4
9/16
- 18
-6
1.93
49
1.11
28
124-1939
0.313
7.9
-5
9/16
- 18
-6
2.17
55
1.16
30
154-0069
0.375
9.5
-6
1/2
- 20
-5
2.05
52
1.04
27
124-1940
0.375
9.5
-6
9/16
- 18
-6
2.17
55
1.15
29
124-1941
0.375
9.5
-6
3/4
- 16
-8
2.32
59
1.32
34
124-1942
0.375
9.5
-6
7/8
- 14
-10
2.28
58
1.29
33
124-1943
0.500
12.7
-8
3/4
- 16
-8
2.40
61
1.39
35
124-1944
0.500
12.7
-8
7/8
- 14
-10
2.36
60
1.35
34
109
Caterpillar Low and Medium Pressure Hose Products
STOR Male (continued)
B
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844) JIC 37° Male (continued)
B C
PART NUMBER
THREAD
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
1 1/16 - 12
-12
2.52
64
1.53
39
-10
2.40
61
1.42
36
-12
2.60
66
1.53
39
124-1945
0.500
12.7
-8
124-1946
0.625
15.9
-10
124-1947
0.625
15.9
-10
7/8
- 14
1 1/16 - 12 1/16
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-1948
0.750
19.1
-12
1
- 12
-12
2.72
69
1.48
38
154-0070
0.750
19.1
-12
1 3/16 - 12
-14
2.83
72
1.60
41
154-0071
0.750
19.1
-12
1 5/16 - 12
-16
2.95
75
1.72
44
124-1949
1.000
25.4
-16
1 5/16 - 12
-16
3.27
83
1.92
49
124-2336
1.250
31.8
-20
1 5/8 - 12
-20
3.62
92
1.91
49
A THREAD SIZE
A THREAD DASH SIZE
JIC 37° Female Swivel B C THREAD A
PART NUMBER
HEX 2
110
HEX 1
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-1950
0.250
6.4
-4
7/16
- 20
-4
1.46
37
0.63
16
124-1951
0.250
6.4
-4
1/2
- 20
-5
1.61
41
0.78
20
124-1952
0.250
6.4
-4
9/16
- 18
-6
1.65
42
0.82
21
124-1953
0.313
7.9
-5
9/16
- 18
-6
1.85
47
0.82
21
124-1954
0.375
9.5
-6
7/16
- 20
-4
1.89
48
0.89
23
124-1955
0.375
9.5
-6
1/2
- 20
-5
1.93
49
0.92
23
124-1956
0.375
9.5
-6
9/16
- 18
-6
1.93
49
0.93
24
124-1957
0.375
9.5
-6
3/4
- 16
-8
1.97
50
0.96
24
124-1960
0.375
9.5
-6
7/8
- 14
-10
2.01
51
1.01
26
124-1959
0.500
12.7
-8
9/16
- 18
-6
2.09
53
1.08
28
124-1961
0.500
12.7
-8
3/4
- 16
-8
2.13
54
1.12
28
124-1962
0.500
12.7
-8
7/8
- 14
-10
2.17
55
1.17
30
1/16
124-1963
0.500
12.7
-8
-12
2.17
55
1.16
29
124-1964
0.625
15.9
-10
1
3/4
- 16
- 12
-8
1.93
49
0.95
24
124-1965
0.625
15.9
-10
7/8
- 14
-10
2.01
51
1.01
26
124-1966
0.625
15.9
-10
-12
1.97
50
0.99
25
124-1967
0.750
19.1
-12
3/4
- 16
-8
2.32
59
1.10
28
124-1968
0.750
19.1
-12
7/8
- 14
-10
2.28
58
1.08
27
124-1969
0.750
19.1
-12
1 1/16 - 12
-12
2.28
58
1.08
27
124-1970
0.750
19.1
-12
1 3/16 - 12
-14
2.36
60
1.13
29
1 1/16 - 12
5/16
124-1971
0.750
19.1
-12
1
- 12
-16
2.36
60
1.16
30
124-1972
1.000
25.4
-16
1 1/16 - 12
-12
2.68
68
1.19
30
124-1973
1.000
25.4
-16
1 5/16 - 12
-16
2.68
68
1.16
30
124-1974
1.000
25.4
-16
1 5/8 - 12
-20
2.72
69
1.21
31
124-1975
1.250
31.8
-20
1 5/8 - 12
-20
2.91
74
1.33
34
124-1976
1.500
38.1
-24
1 7/8 - 12
-24
3.66
93
1.66
42
124-1977
2.000
50.8
-32
2 1/2 - 12
-32
4.37
111
2.22
56
Permanent Couplings (716, 294, 844) B THREAD A
C
PART NUMBER
D
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-1978
0.250
6.4
-4
7/16
- 20
-4
1.93
49
1.10
28
0.33
8
124-1989
0.250
6.4
-4
7/16
- 20
-4
2.09
53
1.24
32
0.47
12
124-1979
0.250
6.4
-4
9/16
- 18
-6
2.01
51
1.16
30
0.39
10
124-1990
0.250
6.4
-4
9/16
- 18
-6
2.17
55
1.33
34
0.56
14
124-1980
0.375
9.5
-6
9/16
- 18
-6
2.36
60
1.38
35
0.39
10
124-1991
0.375
9.5
-6
9/16
- 18
-6
2.60
66
1.58
40
0.59
15
124-1981
0.375
9.5
-6
3/4
- 16
-8
2.56
65
1.54
39
0.55
14
124-1992
0.375
9.5
-6
3/4
- 16
-8
2.68
68
1.68
43
0.69
18
124-1982
0.500
12.7
-8
3/4
- 16
-8
2.72
69
1.72
44
0.55
14
124-1993
0.500
12.7
-8
3/4
- 16
-8
2.87
73
1.86
47
0.69
18
124-1983
0.500
12.7
-8
7/8
- 14
-10
2.80
71
1.81
46
0.64
16
124-1994
0.500
12.7
-8
7/8
- 14
-10
3.03
77
2.05
52
0.88
22
124-1984
0.625
15.9
-10
7/8
- 14
-10
3.03
77
2.06
52
0.64
16
124-1995
0.625
15.9
-10
7/8
- 14
-10
3.31
84
2.30
58
0.88
22
124-1985
0.625
15.9
-10
1 1/16 - 12
-12
3.19
81
2.19
56
0.77
20
124-1996
0.625
15.9
-10
1 1/16 - 12
-12
3.46
88
2.48
63
1.06
27
124-1986
0.750
19.1
-12
1 1/16 - 12
-12
3.46
88
2.25
57
0.77
20
124-1997
0.750
19.1
-12
1 1/16 - 12
-12
3.78
96
2.54
65
1.06
27
253-1384
1.000
25.4
-16
1 1/16 - 12
-12
4.76
121
3.27
83
1.06
27
5/16
124-1987
1.000
25.4
-16
1
- 12
-16
4.80
122
3.79
96
0.89
23
124-1998
1.000
25.4
-16
1 5/16 - 12
-16
4.76
121
3.28
83
1.16
30
124-1999
1.250
31.8
-20
1 5/8 - 12
-20
5.39
137
3.82
97
1.14
29
124-1988
1.250
31.8
-20
1 5/8 - 12
-20
5.71
145
4.09
104
1.46
37
JIC 37° Female Swivel - 90° Elbow B C
D
PART NUMBER HEX
THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-2000
0.250
6.4
-4
7/16
- 20
-4
1.81
46
0.99
25
0.69
18
124-2015
0.250
6.4
-4
7/16
- 20
-4
1.81
46
0.99
25
0.88
22
124-2025
0.250
6.4
-4
7/16
- 20
-4
1.81
46
0.99
25
1.75
45
124-2001
0.250
6.4
-4
1/2
- 20
-5
1.81
46
0.99
25
0.77
20
124-2026
0.250
6.4
-4
1/2
- 20
-5
1.93
49
1.11
28
1.81
46
124-2002
0.250
6.4
-4
9/16
- 18
-6
1.81
46
0.99
25
0.88
22
124-2016
0.250
6.4
-4
9/16
- 18
-6
1.81
46
0.99
25
1.12
28
124-2027
0.250
6.4
-4
9/16
- 18
-6
1.81
46
0.99
25
2.19
56
124-2003
0.313
7.9
-5
9/16
- 18
-6
2.20
56
1.17
30
0.88
22
124-2004
0.375
9.5
-6
7/16
- 20
-4
2.17
55
1.17
30
0.69
18
124-2005
0.375
9.5
-6
9/16
- 18
-6
2.28
58
1.28
33
0.88
22
124-2017
0.375
9.5
-6
9/16
- 18
-6
2.28
58
1.28
33
1.12
28
124-2028
0.375
9.5
-6
9/16
- 18
-6
2.28
58
1.28
33
2.19
56
124-2006
0.375
9.5
-6
3/4
- 16
-8
2.28
58
1.28
33
1.09
28
124-2018
0.375
9.5
-6
3/4
- 16
-8
2.28
58
1.28
33
1.38
35
124-2029
0.375
9.5
-6
3/4
- 16
-8
2.28
58
1.28
33
2.50
64
124-2171
0.500
12.7
-8
9/16
- 18
-6
2.36
60
1.35
34
0.86
22
111
Caterpillar Low and Medium Pressure Hose Products
JIC 37° Female Swivel - 45° Elbow
JIC 37° Female Swivel - 90° Elbow (continued) B C
PART NUMBER
D
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
HEX THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2007
0.500
12.7
-8
3/4
- 16
-8
2.52
64
1.53
39
1.09
28
124-2019
0.500
12.7
-8
3/4
- 16
-8
2.52
64
1.53
39
1.38
35
124-2030
0.500
12.7
-8
3/4
- 16
-8
2.52
64
1.53
39
2.50
64
124-2008
0.500
12.7
-8
7/8
- 14
-10
2.52
64
1.53
39
1.23
31
124-2020
0.500
12.7
-8
7/8
- 14
-10
2.52
64
1.53
39
1.75
45
124-2031
0.500
12.7
-8
7/8
- 14
-10
2.52
64
1.53
39
3.06
78
124-2009
0.500
12.7
-8
-12
2.52
64
1.53
39
1.82
46
124-2010
0.625
15.9
-10
7/8
- 14
-10
2.83
72
1.85
47
1.23
31
124-2021
0.625
15.9
-10
7/8
- 14
-10
2.83
72
1.85
47
1.75
45
124-2032
0.625
15.9
-10
7/8
- 14
-10
2.83
72
1.85
47
3.06
78
124-2011
0.625
15.9
-10
-12
2.83
72
1.85
47
1.82
46
1 1/16 - 12
1 1/16 - 12 1/16
124-2022
0.625
15.9
-10
1
- 12
-12
2.83
72
1.85
47
2.06
52
124-2033
0.625
15.9
-10
1 1/16 - 12
-12
2.83
72
1.85
47
3.62
92
124-2012
0.750
19.1
-12
1 1/16 - 12
-12
3.31
84
2.07
53
1.82
46
124-2023
0.750
19.1
-12
1 1/16 - 12
-12
3.31
84
2.07
53
2.06
52
269-3994
0.750
19.1
-12
1 1/16 - 12
-12
3.29
84
2.07
53
2.46
62
124-2034
0.750
19.1
-12
1 1/16 - 12
-12
3.31
84
2.07
53
3.73
95
124-2035
0.750
19.1
-12
1 3/16 - 12
-14
3.82
97
2.60
66
3.94
100
147-1706
0.750
19.1
-12
1 5/16 - 12
-16
3.31
84
2.07
53
2.14
54 54
5/16
124-2013
1.000
25.4
-16
1
- 12
-16
4.65
118
3.13
80
2.14
124-2024
1.000
25.4
-16
1 5/16 - 12
-16
4.49
114
3.00
76
2.52
64
124-2036
1.000
25.4
-16
1 5/16 - 12
-16
4.49
114
3.00
76
4.38
111
124-2014
1.250
31.8
-20
1 5/8 - 12
-20
5.20
132
3.61
92
2.58
66
147-1707
1.250
31.8
-20
1 5/8 - 12
-20
5.08
129
3.48
88
3.00
76
147-1708
1.250
31.8
-20
1 5/8 - 12
-20
5.08
129
3.48
88
5.44
138
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
SAE 45° Male
B C
PART NUMBER
154-0086 THREAD
112
HEX
D DROP (in) (mm)
HOSE I.D. (in) (mm)
0.375
9.5
-6
5/8
- 18
-6
B LENGTH (in) (mm)
2.20
56
C CUT-OFF FACTOR (in) (mm)
1.22
31
Permanent Couplings (716, 294, 844) Caterpillar Low and Medium Pressure Hose Products
SAE 45° Inverted Flare Male Swivel B C
PART NUMBER THREAD A HEX 1 HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2041
0.250
6.4
-4
7/16
- 24
-4
1.93
49
1.08
27
124-2042
0.250
6.4
-4
1/2
- 20
-5
1.97
50
1.15
29
124-2043
0.375
9.5
-6
5/8
- 18
-6
2.28
58
1.30
33
154-0087
0.375
9.5
-6
11/16
-7
2.32
59
1.33
34
124-2044
0.500
12.7
-8
3/4
- 18
-8
2.56
65
1.55
39
124-2045
0.625
15.9
-10
7/8
- 18
-10
2.48
63
1.50
38
- 18
SAE 45° Inverted Flare Male Swivel - 45° Elbow B C
PART NUMBER D
HEX THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
147-1710
0.250
6.4
-4
7/16
- 24
-4
2.40
61
1.59
40
0.82
21
154-0088
0.375
9.5
-6
5/8
- 18
-6
2.91
74
1.93
49
0.94
24
147-1711
0.500
12.7
-8
3/4
- 18
-8
3.35
85
2.35
60
1.18
30
SAE 45° Inverted Flare Male Swivel - 90° Elbow
B C
D
PART NUMBER HEX THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-2046
0.250
6.4
-4
7/16
- 24
-4
1.81
46
0.99
25
1.38
35
124-2047
0.250
6.4
-4
1/2
- 20
-5
1.81
46
0.99
25
1.32
34
124-2048
0.375
9.5
-6
7/16
- 24
-4
2.17
55
1.17
30
1.30
33
- 20
-5
2.17
55
1.16
30
1.32
34
- 18
-6
2.28
58
1.28
33
1.50
38
-7
2.28
58
1.28
33
1.72
44
154-0089
0.375
9.5
-6
1/2
124-2049
0.375
9.5
-6
5/8
154-0090
0.375
9.5
-6
11/16
147-1712
0.500
12.7
-8
3/4
- 18
-8
2.52
64
1.53
39
1.81
46
147-1713
0.625
15.9
-10
7/8
- 18
-10
2.83
72
1.85
47
2.14
54
- 18
SAE 45° Female Swivel B THREAD A
C
PART NUMBER HEX 2
HEX 1
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2037
0.250
6.4
-4
7/16
- 20
-4
1.50
38
0.67
17
154-0085
0.250
6.4
-4
5/8
- 18
-6
1.54
39
0.71
18
124-2038
0.375
9.5
-6
5/8
- 18
-6
1.81
46
0.81
21
124-2039
0.500
12.7
-8
3/4
- 16
-8
2.13
54
1.12
29
-12
2.28
58
1.08
27
124-2040
0.750
19.1
-12
1
1/16
- 14
113
SAE 45° Female Swivel - 45° Elbow
B C
PART NUMBER
D
HEX THREAD A
B
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
154-0072
0.250
6.4
-4
7/16
- 20
-4
1.93
49
1.10
28
0.33
154-0073
0.250
6.4
-4
1/2
- 20
-5
1.97
50
1.13
29
0.36
9
154-0074
0.375
9.5
-6
5/8
- 18
-6
2.36
60
1.38
35
0.39
10
154-0075
0.375
9.5
-6
3/4
- 16
-8
2.56
65
1.54
39
0.55
14
154-0077
0.500
12.7
-8
3/4
- 16
-8
2.72
69
1.72
44
0.55
14
154-0078
0.500
12.7
-8
7/8
- 14
-10
2.80
71
1.81
46
0.64
16
154-0079
0.750
19.1
-12
-12
3.46
88
2.25
57
0.77
20
1 1/16 - 14
8
SAE 45° Female Swivel - 90° Elbow
C
PART NUMBER
D
HEX THREAD A
B
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
154-0080
0.250
6.4
-4
7/16
- 20
-4
1.81
46
0.99
25
0.68
17
154-0081
0.250
6.4
-4
1/2
- 20
-5
1.81
46
0.99
25
0.77
20
154-0082
0.375
9.5
-6
5/8
- 18
-6
2.28
58
1.28
33
0.85
22
154-0083
0.500
12.7
-8
3/4
- 16
-8
2.52
64
1.53
39
1.09
28
154-0084
0.750
19.1
-12
-12
3.31
84
2.07
53
1.82
46
1 1/16 - 14
SAE Code 61 Flange
C
A
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
PART NUMBER
HOSE I.D. (in) (mm)
124-2050
0.500
12.7
124-2051
0.500
154-0092
0.625
124-2052
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
-8
1.19
30.2
-8
2.72
69
1.70
43 4J-5140
12.7
-8
1.50
38.1
-12
2.83
72
1.83
46 4J-5267
15.9
-10
1.50
38.1
-12
2.91
74
1.93
49 4J-5267
0.750
19.1
-12
1.50
38.1
-12
3.31
84
2.08
53 4J-5267
124-2053
0.750
19.1
-12
1.75
44.5
-16
3.31
84
2.08
53 4J-0520
124-2054
1.000
25.4
-16
1.75
44.5
-16
3.35
85
1.86
47 4J-0520
124-2055
1.000
25.4
-16
2.00
50.8
-20
3.43
87
1.92
49 4J-0522
124-2056
1.250
31.8
-20
2.00
50.8
-20
4.13
105
2.54
65 4J-0522
124-2057
1.250
31.8
-20
2.37
60.3
-24
4.13
105
2.54
65 4J-0524
124-2058
1.500
38.1
-24
2.37
60.3
-24
4.57
116
2.56
65 4J-0524
124-2059
1.500
38.1
-24
2.81
71.4
-32
4.57
116
2.56
65 4J-0527
124-2060
2.000
50.8
-32
2.81
71.4
-32
5.12
130
2.99
76 4J-0527
124-2061
2.000
50.8
-32
3.31
84.1
-40
5.12
130
2.99
76 6J-2680
253-1348
2.500
63.5
-40
3.31
84.1
-40
5.79
147
3.46
88 6J-2680
253-1363
2.500
63.5
-40
4.50 114.3
-56
5.87
149
3.27
83 9X-4611
253-1364
2.500
63.5
-40
5.00 127.0
-64
6.10
155
3.50
89 3E-6703
129-7420
3.500
88.9
-56
4.50 114.3
-56
5.87
149
2.94
75
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
114
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
Permanent Couplings (716, 294, 844)
C
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
A
147-1714
0.500 12.7
-8
1.19
30.2
-8
2.95
75
1.94
49
0.35
9 4J-5140
124-2062
0.750 19.1
-12
1.50
38.1
-12
3.58
91
2.36
60
0.43
11 4J-5267
124-2063
0.750 19.1
-12
1.75
44.5
-16
3.58
91
2.36
60
0.43
11 4J-0520
124-2064
1.000 25.4
-16
1.75
44.5
-16
4.17
106
2.68
68
0.45
11 4J-0520
124-2065
1.000 25.4
-16
2.00
50.8
-20
4.25
108
2.74
70
0.48
12 4J-0522
124-2066
1.250 31.8
-20
2.00
50.8
-20
4.88
124
3.30
84
0.49
12 4J-0522
147-1717
1.250 31.8
-20
2.37
60.3
-24
4.88
124
3.30
84
0.58
15 4J-0524
124-2067
1.500 38.1
-24
2.37
60.3
-24
5.98
152
3.98
101
0.58
15 4J-0524
124-2068
2.000 50.8
-32
2.81
71.4
-32
7.44
189
5.29
134
0.88
22 4J-0527
253-1349
2.500 63.5
-40
3.31
84.1
-40
7.05
179
4.41
112
0.71
18 6J-2680
253-1357
2.500 63.5
-40
4.00 101.6
-48
7.09
180
4.49
114
0.71
18 117-1266
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 30° Elbow B C
D
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
A
124-2069
0.750 19.1
-12
1.50
38.1
-12
3.66
93
2.46
63
0.61
16 4J-5267
124-2070
1.000 25.4
-16
1.75
44.5
-16
4.29
109
2.81
71
0.64
16 4J-0520
124-2071
1.250 31.8
-20
2.00
50.8
-20
5.04
128
3.44
87
0.70
18 4J-0522
124-2072
1.500 38.1
-24
2.37
60.3
-24
6.18
157
4.16
106
0.83
21 4J-0524
124-2073
1.500 38.1
-24
2.81
71.4
-32
6.18
157
4.16
106
0.83
21 4J-0527
124-2074
2.000 50.8
-32
2.81
71.4
-32
7.64
194
5.51
140
1.24
32 4J-0527
236-7638
2.500 63.5
-40
3.31
84.1
-40
7.36
187
4.80
122
1.06
27 6J-2680
253-1358
2.500 63.5
-40
4.00 101.6
-48
7.44
189
4.84
123
1.06
27 117-1266
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 45° Elbow B C
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
D
PART NUMBER
A
124-2075
0.500 12.7
-8
1.19
30.2
-8
3.07
78
2.06
52
0.79
20 4J-5140
124-2076
0.500 12.7
-8
1.50
38.1
-12
3.11
79
2.10
53
0.84
21 4J-5267
147-1715
0.625 15.9
-10
1.50
38.1
-12
3.58
91
2.60
66
1.13
29 4J-5267
124-2077
0.750 19.1
-12
1.50
38.1
-12
3.82
97
2.58
66
0.99
25 4J-5267
124-2078
0.750 19.1
-12
1.75
44.5
-16
3.82
97
2.58
66
0.99
25 4J-0520
124-2079
1.000 25.4
-16
1.75
44.5
-16
4.49
114
2.98
76
1.06
27 4J-0520
124-2080
1.000 25.4
-16
2.00
50.8
-20
4.53
115
3.02
77
1.11
28 4J-0522
257-2723
1.250 31.8
-20
1.75
44.5
-16
5.04
128
1.61
41
1.06
27 4J-0520
124-2081
1.250 31.8
-20
2.00
50.8
-20
5.24
133
3.64
93
1.18
30 4J-0522
124-2082
1.250 31.8
-20
2.37
60.3
-24
5.24
133
3.64
93
1.22
31 4J-0524
124-2083
1.500 38.1
-24
2.37
60.3
-24
6.42
163
4.39
112
1.38
35 4J-0524
193-1551
1.500 38.1
-24
2.37
60.3
-24
5.39
137
3.39
86
1.38
35 4J-0524
124-2084
1.500 38.1
-24
2.81
71.4
-32
6.42
163
4.39
112
1.38
35 4J-0527
115
Caterpillar Low and Medium Pressure Hose Products
SAE Code 61 Flange - 22 1/2° Elbow B
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844) SAE Code 61 Flange - 45° Elbow (continued) B C
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
D
PART NUMBER
HOSE I.D. (in) (mm)
A
124-2085
2.000 50.8
-32
2.81
71.4
-32
7.95
202
5.80
147
2.04
52 4J-0527
197-1332
2.000 50.8
-32
3.31
84.1
-40
7.95
202
5.79
147
2.04
52 4J-0527
253-1351
2.500 63.5
-40
3.31
84.1
-40
7.91
201
5.31
135
1.85
47 6J-2680
253-1359
2.500 63.5
-40
4.00 101.6
-48
7.95
202
5.35
136
1.89
48 117-1266
129-7474
3.000 76.2
-48
4.00 101.6
-48
9.72
247
7.26
184
2.56
65
129-7475
3.500 88.9
-56
4.50 114.3
-56
11.85
301
8.89
226
2.88
73
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 60° Elbow B C
D
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2086
0.750 19.1
-12
1.50
38.1
-12
3.82
97
2.59
66
1.39
35 4J-5267
124-2087
1.000 25.4
-16
1.75
44.5
-16
4.53
115
3.03
77
1.51
38 4J-0520
201-0967
1.000 25.4
-16
2.00
50.8
-20
4.57
116
3.06
78
1.57
40 4J-0522
124-2088
1.250 31.8
-20
2.00
50.8
-20
5.28
134
3.72
95
1.66
42 4J-0522
124-2089
1.500 38.1
-24
2.37
60.3
-24
6.50
165
4.48
114
1.97
50 4J-0524
196-5597
1.500 38.1
-24
2.81
71.4
-32
6.50
165
4.48
114
1.97
50 4J-0527
124-2090
2.000 50.8
-32
2.81
71.4
-32
8.15
207
6.01
153
2.89
73 4J-0527
253-1352
2.500 63.5
-40
3.31
84.1
-40
9.13
232
6.54
166
2.80
71 6J-2680
253-1360
2.500 63.5
-40
4.00 101.6
-48
9.17
233
6.57
167
2.87
73 117-1266
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
D
SAE Code 61 Flange - 67 1/2° Elbow PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2091
0.750 19.1
-12
1.50
38.1
-12
3.78
96
2.56
65
1.58
40 4J-5267
124-2092
1.000 25.4
-16
1.75
44.5
-16
4.53
115
3.02
77
1.74
44 4J-0520
197-8505
1.000 25.4
-16
2.00
50.8
-20
4.53
115
3.04
77
1.80
46 4J-0522
124-2093
1.250 31.8
-20
2.00
50.8
-20
5.31
135
3.70
94
1.91
49 4J-0522
124-2094
1.250 31.8
-20
2.37
60.3
-24
5.28
134
3.69
94
1.98
50 4J-0524
124-2095
1.500 38.1
-24
2.37
60.3
-24
6.50
165
4.46
113
2.27
58 4J-0524
124-2096
1.500 38.1
-24
2.81
71.4
-32
6.50
165
4.46
113
2.27
58 4J-0527
124-2097
2.000 50.8
-32
2.81
71.4
-32
8.11
206
5.96
151
3.31
84 4J-0527
253-1380
2.000 50.8
-32
3.31
84.1
-40
7.99
203
5.87
149
3.31
84 6J-2680
253-1353
2.500 63.5
-40
3.31
84.1
-40
8.27
210
5.67
144
3.27
83 6J-2680
253-1361
2.500 63.5
-40
4.00 101.6
-48
8.35
212
5.75
146
3.27
83 117-1266
NOTE: Refer to Seal Section of this Guide for a complete list of seals and applications.
116
C CUT-OFF FACTOR (in) (mm)
Permanent Couplings (716, 294, 844)
C
D
PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2098
0.500 12.7
-8
1.19
30.2
-8
2.80
71
1.79
45
1.63
41 4J-5140
124-2099
0.500 12.7
-8
1.50
38.1
-12
2.80
71
1.79
45
1.69
43 4J-5267
124-2100
0.625 15.9
-10
1.50
38.1
-12
2.95
75
1.98
50
2.12
54 4J-5267
124-2101
0.750 19.1
-12
1.50
38.1
-12
3.54
90
2.32
59
2.13
54 4J-5267
255-4878
0.750 19.1
-12
1.50
38.1
-12
3.54
90
2.32
59
2.72
69 4J-5267
124-2102
0.750 19.1
-12
1.75
44.5
-16
3.54
90
2.32
59
2.19
56 4J-0520
176-8199
0.750 19.1
-12
2.00
50.8
-20
3.54
90
2.31
59
2.19
56 4J-5022
124-2103
1.000 25.4
-16
1.75
44.5
-16
4.29
109
2.80
71
2.38
61 4J-0520
221-6951
1.000 25.4
-16
1.75
44.5
-16
4.29
109
2.80
71
4.76
121 4J-0520
124-2104
1.000 25.4
-16
2.00
50.8
-20
4.29
109
2.80
71
2.44
62 4J-0522
124-2105
1.250 31.8
-20
2.00
50.8
-20
5.08
129
3.47
88
2.63
67 4J-0522
256-4553
1.250 31.8
-20
2.00
50.8
-20
5.59
142
3.58
91
2.64
67 4J-0522
257-0374
1.250 31.8
-20
2.00
50.8
-20
5.08
129
3.46
88
4.57
116 4J-0522
124-2106
1.250 31.8
-20
2.37
60.3
-24
5.08
129
3.47
88
2.63
67 4J-0524
124-2107
1.500 38.1
-24
2.37
60.3
-24
6.18
157
4.18
106
3.12
79 4J-0524
124-2108
1.500 38.1
-24
2.81
71.4
-32
6.18
157
4.18
106
3.12
79 4J-0527
124-2109
2.000 50.8
-32
2.81
71.4
-32
7.76
197
5.62
143
4.50
114 4J-0527
124-2110
2.000 50.8
-32
3.31
84.1
-40
7.76
197
5.62
143
4.50
114 6J-2680
253-1354
2.500 63.5
-40
3.31
84.1
-40
8.11
206
5.47
139
4.69
119 6J-2680
253-1362
2.500 63.5
-40
4.00 101.6
-48
8.15
207
5.55
141
4.69
119 117-1266
115-8215
3.000 76.2
-48
4.00 101.6
-48
8.86
225
5.94
151
5.50
140 2H-6338
176-1550
3.000 76.2
-48
4.50 114.3
-56
10.31
262
7.83
199
6.38
162
129-7487
3.500 88.9
-56
4.50 114.3
-56
7.40
188
4.44
113
5.63
143
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
SAE Code 61 Flange - 110° Elbow PART NUMBER
D
A
B
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
184-4910
1.000 25.4
-16
1.75
44.5
-16
3.90
99
2.39
61
2.84
72 4J-0520
209-3231
1.000 25.4
-16
2.00
50.8
-20
3.90
99
2.38
61
2.90
74 4J-0522
124-2170
1.250 31.8
-20
2.37
60.3
-24
4.65
118
3.05
78
3.15
80 4J-0524
201-0968
2.000 50.8
-32
2.81
71.4
-32
6.69
170
4.55
116
5.34
136 4J-0527
Komatsu Style Flange
A
C
PART NUMBER
154-0091
HOSE I.D. (in) (mm)
0.625
15.9
HOSE DASH SIZE
-10
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
1.34
34.1
-10
B LENGTH (in) (mm)
3.07
78
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
2.10
53 4J-8996
117
Caterpillar Low and Medium Pressure Hose Products
SAE Code 61 Flange - 90° Elbow B
Komatsu Style Flange - 45° Elbow B C
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
D
PART NUMBER
154-0093
0.625 15.9
-10
1.34
34.1
-10
3.46
88
2.49
63
1.02
26 4J-8996
A
Komatsu Style Flange - 90° Elbow B C
PART NUMBER D
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
154-0094
HOSE I.D. (in) (mm)
0.625 15.9
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
-10
1.34
34.1
-10
B LENGTH (in) (mm)
2.95
75
C CUT-OFF FACTOR (in) (mm)
1.98
50
D DROP O-RING (in) (mm) SEAL
2.17
55 4J-8996
A
B
ORFS Male
C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
242-9532
0.250
6.5
-4
11/16
- 16
-6
1.93
49
0.98
25 6V-8397
186-4133
0.500
12.7
-8
13/16
- 16
-8
2.20
56
1.21
31 6V-8398
186-4134
0.750
19.1
-12
1 3/16 - 12
-12
2.56
65
1.33
34 6V-9746
186-4135
1.000
25.4
-16
1 7/16 - 12
-16
3.03
77
1.54
39 5K-9090
184-3489
1.250
31.8
-20
1 11/16 - 12
-20
3.50
89
1.85
47 6V-8400
186-4136
1.500
38.1
-24
2 - 12
-24
4.37
111
2.36
60 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel B THREAD A
C
PART NUMBER
124-2111 HEX 2
118
HEX 1
HOSE I.D. (in) (mm)
0.250
6.4
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
-4
9/16
- 18
-4
1.81
46
1.00
25 4J-5477
- 16
-6
1.93
49
1.09
28 6V-8397
124-2113
0.250
6.4
-4
11/16
154-0095
0.250
6.4
-4
13/16
- 16
-8
2.09
53
1.25
32 6V-8398
154-0096
0.375
9.5
-6
9/16
- 18
-4
2.17
55
1.19
30 4J-5477
124-2114
0.375
9.5
-6
11/16
- 16
-6
2.20
56
1.22
31 6V-8397
147-1718
0.375
9.5
-6
11/16
- 16
-6
6.06
154
5.06
129 6V-8397
124-2116
0.375
9.5
-6
13/16
- 16
-8
2.36
60
1.37
35 6V-8398
154-0097
0.500
12.7
-8
11/16
- 16
-6
2.40
61
1.40
36 6V-8397
124-2117
0.500
12.7
-8
13/16
- 16
-8
2.52
64
1.54
39 6V-8398
124-2118
0.500
12.7
-8
1 - 14
-10
2.64
67
1.63
42 7J-9108
147-1716
0.500
12.7
-8
1 3/16 - 12
-12
2.72
69
1.73
44 6V-9746
Permanent Couplings (716, 294, 844) Caterpillar Low and Medium Pressure Hose Products
ORFS Female Swivel (continued) B THREAD A
C
PART NUMBER
HEX 2
HEX 1
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
124-2119
0.625
15.9
-10
1 - 14
-10
2.44
62
1.47
37 7J-9108
124-2120
0.625
15.9
-10
1 3/16 - 12
-12
2.56
65
1.57
40 6V-9746
154-0098
0.750
19.1
-12
1 - 14
-10
2.80
71
1.56
40 7J-9108
3/16
9X-3760
0.750
19.1
-12
1
- 12
-12
2.68
68
1.24
32 6V-9746
124-2121
0.750
19.1
-12
1 3/16 - 12
-12
2.80
71
1.59
40 6V-9746
124-2122
0.750
19.1
-12
1 7/16 - 12
-16
2.95
75
1.73
44 5K-9090
124-2123
1.000
25.4
-16
1 7/16 - 12
-16
3.23
82
1.73
44 5K-9090
124-2124
1.000
25.4
-16
1 11/16 - 12
-20
3.23
82
1.73
44 6V-8400
124-2125
1.250
31.8
-20
1 11/16 - 12
-20
3.39
86
1.79
46 6V-8400
124-2320
1.500
38.1
-24
2 - 12
-24
3.98
101
1.97
50 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 22 1/2° Elbow B C
PART NUMBER
D
124-2127
A
HOSE I.D. (in) (mm)
0.500
12.7
HOSE DASH SIZE
-8
A THREAD SIZE 13/16
- 16
A THREAD DASH SIZE
-8
B LENGTH (in) (mm)
3.07
78
C CUT-OFF FACTOR (in) (mm)
2.07
53
D DROP O-RING (in) (mm) SEAL
0.43
11 6V-8398
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 30° Elbow B C
PART NUMBER
D
201-7376
A
HOSE I.D. (in) (mm)
1.000
25.4
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-16
1 7/16 - 12
-16
B LENGTH (in) (mm)
4.17
106
C CUT-OFF FACTOR (in) (mm)
2.66
68
D DROP O-RING (in) (mm) SEAL
0.56
14 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 45° Elbow B C THREAD A
D
PART NUMBER
124-2128 HEX 2
HOSE I.D. (in) (mm)
0.250
6.4
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
-4
9/16
- 18
-4
2.01
51
1.18
30
0.41
10 4J-5477
- 16
-6
2.05
52
1.20
31
0.43
11 6V-8397
124-2129
0.250
6.4
-4
11/16
154-0099
0.375
9.5
-6
9/16
- 18
-4
2.36
60
1.36
35
0.41
10 4J-5477
124-2130
0.375
9.5
-6
11/16
- 16
-6
2.40
61
1.42
36
0.42
11 6V-8397
124-2131
0.375
9.5
-6
13/16
- 16
-8
2.60
66
1.58
40
0.59
15 6V-8398
154-0100
0.500
12.7
-8
11/16
- 16
-6
2.48
63
1.49
38
0.43
11 6V-8397
119
ORFS Female Swivel - 45° Elbow (continued) B C THREAD A
PART NUMBER
D
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE 13/16
- 16
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2132
0.500
12.7
-8
-8
2.76
70
1.76
45
0.59
15 6V-8398
124-2133
0.500
12.7
-8
1 - 14
-10
2.83
72
1.82
46
0.65
17 7J-9108
124-2134
0.500
12.7
-8
1 3/16 - 12
-12
2.99
76
2.00
51
0.83
21 6V-9746
124-2135
0.625
15.9
-10
1 - 14
-10
3.07
78
2.07
53
0.65
17 7J-9108
124-2136
0.625
15.9
-10
1 3/16 - 12
-12
3.23
82
2.25
57
0.83
21 6V-9746
9X-3776
0.750
19.1
-12
1 3/16 - 12
-12
3.46
88
2.03
52
0.83
21 6V-9746
124-2137
0.750
19.1
-12
1 3/16 - 12
-12
3.54
90
2.31
59
0.83
21 6V-9746
124-2138
1.000
25.4
-16
1 7/16 - 12
-16
4.37
111
2.86
73
0.94
24 5K-9090
124-2139
1.250
31.8
-20
1 11/16 - 12
-20
5.28
134
3.65
93
1.00
25 6V-8400
147-1696
1.500
38.1
-24
2 - 12
-24
5.87
149
3.86
98
1.07
27 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications
B C
ORFS Female Swivel - 90° Elbow PART NUMBER
D
A
120
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2140
0.250
6.4
-4
9/16
- 18
-4
1.81
46
0.99
25
0.78
20 4J-5477
124-2322
0.250
6.4
-4
9/16
- 18
-4
1.81
46
0.99
25
1.26
32 4J-5477
124-2158
0.250
6.4
-4
9/16
- 18
-4
1.81
46
0.99
25
1.80
46 4J-5477
124-2141
0.250
6.4
-4
11/16
- 16
-6
1.81
46
0.99
25
0.90
23 6V-8397
124-2159
0.250
6.4
-4
11/16
- 16
-6
1.81
46
0.99
25
2.13
54 6V-8397
124-2142
0.250
6.4
-4
13/16
- 16
-8
1.81
46
0.99
25
1.15
29 6V-8398
124-2143
0.375
9.5
-6
9/16
- 18
-4
2.17
55
1.17
30
0.78
20 4J-5477
124-2144
0.375
9.5
-6
11/16
- 16
-6
2.28
58
1.28
33
0.90
23 6V-8397
124-2323
0.375
9.5
-6
11/16
- 16
-6
2.28
58
1.28
33
1.51
38 6V-8397
124-2160
0.375
9.5
-6
11/16
- 16
-6
2.28
58
1.28
33
2.13
54 6V-8397
124-2145
0.375
9.5
-6
13/16
- 16
-8
2.28
58
1.28
33
1.15
29 6V-8398
124-2161
0.375
9.5
-6
13/16
- 16
-8
2.28
58
1.28
33
2.51
64 6V-8398
124-2146
0.500
12.7
-8
11/16
- 16
-6
2.36
60
1.35
34
0.90
23 6V-8397
124-2147
0.500
12.7
-8
13/16
- 16
-8
2.52
64
1.53
39
1.15
29 6V-8398
124-2325
0.500
12.7
-8
13/16
- 16
-8
2.52
64
1.53
39
1.62
41 6V-8398
124-2162
0.500
12.7
-8
13/16
- 16
-8
2.52
64
1.53
39
2.51
64 6V-8398
124-2148
0.500
12.7
-8
1 - 14
-10
2.52
64
1.53
39
1.27
32 7J-9108
124-2163
0.500
12.7
-8
1 - 14
-10
2.52
64
1.53
39
2.76
70 7J-9108
124-2149
0.500
12.7
-8
1 3/16 - 12
-12
2.52
64
1.53
39
1.88
48 6V-9746
124-2150
0.625
15.9
-10
1 - 14
-10
2.83
72
1.87
48
1.27
32 7J-9108
124-2168
0.625
15.9
-10
1 - 14
-10
2.83
72
1.85
47
1.85
47 7J-9108
124-2164
0.625
15.9
-10
1 - 14
-10
2.83
72
1.87
48
2.76
70 7J-9108
124-2151
0.625
15.9
-10
1 3/16 - 12
-12
2.83
72
1.87
48
1.88
48 6V-9746
124-2152
0.750
19.1
-12
1 - 14
-10
3.15
80
1.92
49
1.27
32 7J-9108
3/16
124-2153
0.750
19.1
-12
1
- 12
-12
3.31
84
2.07
53
1.88
48 6V-9746
147-1694
0.750
19.1
-12
1 3/16 - 12
-12
3.31
84
2.07
53
2.28
58 6V-9746
124-2165
0.750
19.1
-12
1 3/16 - 12
-12
3.31
84
2.07
53
3.78
96 6V-9746
124-2154
0.750
19.1
-12
1 7/16 - 12
-16
3.31
84
2.07
53
2.21
56 5K-9090
124-2155
1.000
25.4
-16
1 7/16 - 12
-16
4.29
109
2.80
71
2.21
56 5K-9090
Permanent Couplings (716, 294, 844)
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
147-1695
1.000
25.4
-16
1 7/16 - 12
-16
4.29
109
2.80
71
2.78
71 5K-9090
124-2166
1.000
25.4
-16
1 7/16 - 12
-16
4.29
109
2.80
71
4.50
114 5K-9090
124-2156
1.000
25.4
-16
1 11/16 - 12
-20
4.29
109
2.80
71
2.51
64 6V-8400
11/16
124-2157
1.250
31.8
-20
1
- 12
-20
5.20
132
3.60
91
2.51
64 6V-8400
124-2167
1.250
31.8
-20
1 11/16 - 12
-20
5.20
132
3.60
91
5.09
129 6V-8400
154-0115
1.500
38.1
-24
2 - 12
-24
5.79
147
3.78
96
2.70
69 8T-0315
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
Double Collet - 90° Elbow PART NUMBER
176-2483
HOSE I.D. (in) (mm)
0.250
6.4
HOSE DASH SIZE
-4
B LENGTH (in) (mm)
1.81
46
C CUT-OFF FACTOR (in) (mm)
0.87
22
D DROP (in) (mm)
1.82
46
D
Light Duty Metric Standpipe B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF NUT FACTOR PART (in) (mm) NUMBER
RING PART NUMBER
124-2188
0.250
6.4
-4
0.24
6
2.01
51
1.19
30 5W-1636
5W-1648
124-2189
0.250
6.4
-4
0.31
8
1.93
49
1.11
28 5W-1680
5W-1681
124-2190
0.313
7.9
-5
0.39
10
2.20
56
1.20
31 5W-1638
5W-1650
124-2192
0.375
9.5
-6
0.39
10
2.28
58
1.28
32 5W-1638
5W-1650
124-2193
0.375
9.5
-6
0.47
12
2.20
56
1.20
30 5W-1639
5W-1651
124-2194
0.500
12.7
-8
0.59
15
2.32
59
1.33
34 5W-1640
5W-1653
124-2195
0.625
15.9
-10
0.71
18
2.36
60
1.37
35 5W-1642
5W-1655
124-2196
0.750
19.1
-12
0.71
18
2.64
67
1.42
36 5W-1642
5W-1655
124-2197
0.750
19.1
-12
0.87
22
2.64
67
1.42
36 5W-1644
5W-1657
124-2198
1.000
25.4
-16
1.10
28
3.11
79
1.60
41 5W-4778
5W-4779
124-2199
1.250
31.8
-20
1.38
35
3.31
84
1.72
44 5W-1647
5W-1660
121
Caterpillar Low and Medium Pressure Hose Products
ORFS Female Swivel - 90° Elbow (continued)
B C
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844) Metric Male - 24° Inverted Cone - Light Series (DIN 20078) B C
PART NUMBER
THREAD A
HEX
C THREAD A
HEX 1
C
Thread A
122
A TUBE O.D. (in) (mm)
0.250
6.4
-4
M12 x 1.5
0.24
124-2177
0.250
6.4
-4
M14 x 1.5
124-2178
0.313
7.9
-5
M16 x 1.5
124-2180
0.375
9.5
-6
124-2181
0.375
9.5
124-2182
0.500
124-2183
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
6
1.69
43
0.87
22
0.31
8
1.69
43
0.87
22
0.39
10
2.01
51
0.99
25
M16 x 1.5
0.39
10
2.01
51
1.01
26
-6
M18 x 1.5
0.47
12
2.01
51
1.01
26
12.7
-8
M22 x 1.5
0.59
15
2.17
55
1.15
29
0.625
15.9
-10
M26 x 1.5
0.71
18
2.17
55
1.19
30
124-2184
0.750
19.1
-12
M26 x 1.5
0.71
18
2.40
61
1.18
30
124-2185
0.750
19.1
-12
M30 x 2.0
0.87
22
2.56
65
1.34
34
124-2186
1.000
25.4
-16
M36 x 2.0
1.10
28
2.95
75
1.47
37
124-2187
1.250
31.8
-20
M45 x 2.0
1.38
35
3.35
85
1.74
44
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
124-2200
0.250
6.4
-4
M12 x 1.5
0.24
124-2202
0.250
6.4
-4
M14 x 1.5
124-2204
0.375
9.5
-6
M16 x 1.5
124-2205
0.375
9.5
-6
124-2207
0.500
12.7
124-2208
0.625
124-2209
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
6
1.81
46
0.97
25
0.31
8
1.77
45
0.95
24
0.39
10
2.17
55
1.15
29
M18 x 1.5
0.47
12
2.17
55
1.15
29
-8
M22 x 1.5
0.59
15
2.36
60
1.34
34
15.9
-10
M26 x 1.5
0.71
18
2.20
56
1.21
31
0.750
19.1
-12
M30 x 2.0
0.87
22
2.56
65
1.33
34
124-2210
1.000
25.4
-16
M36 x 2.0
1.10
28
2.91
74
1.40
36
124-2211
1.250
31.8
-20
M45 x 2.0
1.38
35
3.19
81
1.60
41
Metric Female Swivel - Spherical Seat - Light Series (DIN 20078) - 45° Elbow PART NUMBER
D
A THREAD SIZE
124-2176
PART NUMBER
B
HOSE DASH SIZE
Metric Female Swivel - Spherical Seat - Light Series (DIN 20078)
B
HEX 2
HOSE I.D. (in) (mm)
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-2212
0.250
6.4
-4
M14 x 1.5
0.31
8
2.20
56
1.36
35
0.59
15
124-2213
0.313
7.9
-5
M16 x 1.5
0.39
10
2.76
70
1.75
45
0.84
21
124-2214
0.375
9.5
-6
M16 x 1.5
0.39
10
2.80
71
1.80
46
0.82
21
124-2215
0.375
9.5
-6
M18 x 1.5
0.47
12
2.80
71
1.80
46
0.81
21
124-2216
0.500
12.7
-8
M22 x 1.5
0.59
15
3.07
78
2.08
53
0.91
23
124-2217
0.625
15.9
-10
M26 x 1.5
0.71
18
3.50
89
2.52
64
1.10
28
124-2218
0.750
19.1
-12
M26 x 1.5
0.71
18
3.82
97
2.58
66
1.10
28
124-2219
0.750
19.1
-12
M30 x 2.0
0.87
22
3.78
96
2.55
65
1.06
27
124-2220
1.000
25.4
-16
M36 x 2.0
1.10
28
4.72
120
3.22
82
1.30
33
Permanent Couplings (716, 294, 844)
PART NUMBER
D
Thread A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-2222
0.250
6.4
-4
M14 x 1.5
0.31
8
1.81
46
0.99
25
1.10
28
124-2223
0.313
7.9
-5
M16 x 1.5
0.39
10
2.20
56
1.17
30
1.45
37
124-2224
0.375
9.5
-6
M18 x 1.5
0.47
12
2.28
58
1.28
33
1.44
37
124-2225
0.500
12.7
-8
M22 x 1.5
0.59
15
2.52
64
1.53
39
1.65
42
124-2226
0.625
15.9
-10
M26 x 1.5
0.71
18
2.83
72
1.85
47
2.00
51
124-2227
0.750
19.1
-12
M30 x 2.0
0.87
22
3.31
84
2.07
53
2.09
53
124-2228
1.000
25.4
-16
M36 x 2.0
1.10
28
4.29
109
2.80
71
2.72
69
124-2229
1.250
31.8
-20
M45 x 2.0
1.38
35
5.08
129
3.47
88
3.00
76
Metric Female Swivel - 24° Taper with O-Ring - Light Series (DIN 20078)
B C THREAD A
PART NUMBER HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
124-2230
0.250
6.4
-4
M12 x 1.5
0.24
6
1.93
49
1.09
28 3E-4288
124-2232
0.250
6.4
-4
M14 x 1.5
0.31
8
1.93
49
1.09
28 3E-4289
124-2233
0.313
7.9
-5
M16 x 1.5
0.39
10
2.20
56
1.18
30 3E-4296
124-2234
0.375
9.5
-6
M16 x 1.5
0.39
10
2.24
57
1.26
32 3E-4296
124-2235
0.375
9.5
-6
M18 x 1.5
0.47
12
2.24
57
1.25
32 3E-4297
124-2236
0.500
12.7
-8
M22 x 1.5
0.59
15
2.52
64
1.50
38 3E-4298
124-2237
0.625
15.9
-10
M26 x 1.5
0.71
18
2.40
61
1.41
36 7T-0506
124-2238
0.750
19.1
-12
M26 x 1.5
0.71
18
2.72
69
1.49
38 7T-0506
124-2239
0.750
19.1
-12
M30 x 2.0
0.87
22
2.76
70
1.55
39 3E-6761
124-2240
1.000
25.4
-16
M36 x 2.0
1.10
28
3.11
79
1.61
41 092-2304
124-2241
1.250
31.8
-20
M45 x 2.0
1.38
35
3.46
88
1.87
48 9X-7447
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
D
PART NUMBER HEX
THREAD A
Metric Female Swivel - 24° Taper with O-Ring - Light Series (DIN 20078) - 90° Elbow HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
221-0452
0.375
9.5
-6
M16 x 1.5
0.39
10
2.28
58
1.26
32 3E-4296
228-2991
0.500
12.7
-8
M22 x 1.5
0.59
15
2.52
64
1.53
39 3E-4298
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
123
Caterpillar Low and Medium Pressure Hose Products
Metric Female Swivel - Spherical Seat - Light Series (DIN 20078) - 90° Elbow
B C
Metric Male - 24° Inverted Cone - Heavy Series (DIN 20078) B C
PART NUMBER
THREAD A
HEX
B C THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2242
0.250
6.4
-4
M16 x 1.5
0.31
8
1.81
46
1.00
25
124-2243
0.250
6.4
-4
M18 x 1.5
0.39
10
1.81
46
1.00
25
124-2244
0.313
7.9
-5
M20 x 1.5
0.47
12
2.17
55
1.14
29
124-2245
0.375
9.5
-6
M20 x 1.5
0.47
12
2.13
54
1.13
29
124-2246
0.375
9.5
-6
M22 x 1.5
0.55
14
2.20
56
1.20
30
124-2247
0.500
12.7
-8
M24 x 1.5
0.63
16
2.28
58
1.28
33
124-2248
0.625
15.9
-10
M30 x 2.0
0.79
20
2.44
62
1.46
37
124-2249
0.750
19.1
-12
M30 x 2.0
0.79
20
2.64
67
1.42
36
124-2250
0.750
19.1
-12
M36 x 2.0
0.98
25
2.76
70
1.53
39
124-2251
1.000
25.4
-16
M42 x 2.0
1.18
30
3.23
82
1.73
44
124-2252
1.250
31.8
-20
M52 x 2.0
1.50
38
3.66
93
2.07
53
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
124-2253
0.250
6.4
-4
M16 x 1.5
0.31
8
2.01
51
1.17
30 3E-4289
124-2254
0.250
6.4
-4
M18 x 1.5
0.39
10
2.05
52
1.21
31 3E-4296
124-2255
0.313
7.9
-5
M20 x 1.5
0.47
12
2.28
58
1.26
32 3E-4297
124-2256
0.375
9.5
-6
M20 x 1.5
0.47
12
2.32
59
1.33
34 3E-4297
124-2257
0.375
9.5
-6
M22 x 1.5
0.55
14
2.48
63
1.47
37 7T-0508
124-2258
0.500
12.7
-8
M24 x 1.5
0.63
16
2.68
68
1.66
42 3E-4298
124-2259
0.625
15.9
-10
M30 x 2.0
0.79
20
2.64
67
1.65
42 3E-4299
124-2260
0.750
19.1
-12
M30 x 2.0
0.79
20
2.95
75
1.75
45 3E-4299
124-2261
0.750
19.1
-12
M36 x 2.0
0.98
25
3.07
78
1.87
48 3E-6762
124-2262
1.000
25.4
-16
M42 x 2.0
1.18
30
3.46
88
1.97
50 3E-6763
124-2263
1.250
31.8
-20
M52 x 2.0
1.50
38
3.86
98
2.26
57 3E-6764
HEX 1 HEX 2
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) - 45° Elbow
THREAD A
PART NUMBER
D
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2264
0.250
6.4
-4
M16 x 1.5
0.31
8
2.28
58
1.45
37
0.67
17 3E-4289
124-2265
0.250
6.4
-4
M18 x 1.5
0.39
10
2.32
59
1.48
38
0.71
18 3E-4296
124-2266
0.313
7.9
-5
M20 x 1.5
0.47
12
2.72
69
1.70
43
0.79
20 3E-4297
124-2267
0.375
9.5
-6
M20 x 1.5
0.47
12
2.83
72
1.85
47
0.87
22 3E-4297
124-2268
0.375
9.5
-6
M22 x 1.5
0.55
14
2.87
73
1.86
47
0.87
22 7T-0508
124-2269
0.500 12.7
-8
M24 x 1.5
0.63
16
3.15
80
2.15
55
0.98
25 6T-6408
124-2270
0.625 15.9
-10
M30 x 2.0
0.79
20
3.50
89
2.53
64
1.12
28 3E-4299
124-2271
0.750 19.1
-12
M30 x 2.0
0.79
20
3.82
97
2.59
66
1.11
28 3E-4299
124-2272
0.750 19.1
-12
M36 x 2.0
0.98
25
3.90
99
2.68
68
1.19
30 3E-6762
124-2273
1.000 25.4
-16
M42 x 2.0
1.18
30
4.92
125
3.42
87
1.50
38 3E-6763
HEX
124
Permanent Couplings (716, 294, 844)
C THREAD A
D
PART NUMBER
124-2274 HEX
HOSE I.D. (in) (mm)
1.250 31.8
HOSE DASH SIZE
A THREAD SIZE
-20
M52 x 2.0
A TUBE O.D. (in) (mm)
1.50
38
B LENGTH (in) (mm)
5.91
150
C CUT-OFF FACTOR (in) (mm)
4.30
109
D DROP O-RING (in) (mm) SEAL
1.58
40 9X-7414
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) - 90° Elbow
D
PART NUMBER HEX
THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
124-2275
0.250
6.4
-4
M16 x 1.5
0.31
8
1.81
46
0.99
25
1.18
30 8T-6850
124-2276
0.250
6.4
-4
M18 x 1.5
0.39
10
1.81
46
0.99
25
1.18
30 8T-7524
124-2277
0.313
7.9
-5
M20 x 1.5
0.47
12
2.20
56
1.17
30
1.48
38 8T-7877
124-2278
0.375
9.5
-6
M20 x 1.5
0.47
12
2.28
58
1.28
33
1.48
38 8T-7877
124-2279
0.375
9.5
-6
M22 x 1.5
0.55
14
2.28
58
1.28
33
1.48
38 7T-0508
124-2280
0.500 12.7
-8
M24 x 1.5
0.63
16
2.52
64
1.53
39
1.75
45 6T-6408
124-2281
0.625 15.9
-10
M30 x 2.0
0.79
20
2.83
72
1.85
47
2.17
55 3E-4299
124-2282
0.750 19.1
-12
M30 x 2.0
0.79
20
3.31
84
2.07
53
2.15
55 3E-4299
124-2283
0.750 19.1
-12
M36 x 2.0
0.98
25
3.31
84
2.07
53
2.27
58 3E-6762
124-2284
1.000 25.4
-16
M42 x 2.0
1.18
30
4.29
109
2.80
71
3.00
76 3E-6764
124-2285
1.250 31.8
-20
M52 x 2.0
1.50
38
5.28
134
3.67
93
3.18
81 9X-7414
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
JIS Male B C
PART NUMBER
THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2286
0.250
6.4
-4
1/4
- 19
-4
1.77
45
0.95
24
124-2287
0.375
9.5
-6
3/8
- 19
-6
2.17
55
1.19
30
124-2288
0.500
12.7
-8
1/2
- 14
-8
2.40
61
1.39
35
124-2289
0.750
19.1
-12
3/4
- 14
-12
2.83
72
1.61
41
124-2290
1.000
25.4
-16
1 - 11
-16
3.31
84
1.80
46
125
Caterpillar Low and Medium Pressure Hose Products
Metric Female Swivel - 24° Taper with O-Ring - Heavy Series (DIN 20078) - 45° Elbow (continued)
B
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844) JIS 30° Flare Female Swivel B C THREAD A
PART NUMBER
HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
154-0102
0.250
6.4
-4
1/4
- 19
-4
1.73
44
0.89
23
154-0103
0.375
9.5
-6
3/8
- 19
-6
2.01
51
1.00
25
154-0104
0.500
12.7
-8
1/2
- 14
-8
2.09
53
1.10
28
- 14
-12
2.36
60
1.16
30
- 14
-12
2.52
64
1.30
33
154-0105
0.750
19.1
-12
3/4
255-4883
0.750
19.1
-12
3/4
JIS Metric 30° Flare Female Swivel (Komatsu Style) B C THREAD A
PART NUMBER
HEX 1
HEX 2
B
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
154-0106
0.250
6.4
-4
M14 x 1.5
0.31
8
1.61
41
0.78
20
154-0108
0.250
6.4
-4
M18 x 1.5
0.47
12
1.69
43
0.87
22
154-0107
0.375
9.5
-6
M14 x 1.5
0.31
8
1.97
50
0.96
25
154-0109
0.375
9.5
-6
M18 x 1.5
0.47
12
1.97
50
0.99
25
154-0110
0.500
12.7
-8
M22 x 1.5
0.59
15
2.13
54
1.11
28
221-0457
0.625
15.9
-10
M24 x 1.5
0.63
16
2.05
52
1.06
27
221-0458
0.750
19.1
-12
M30 x 1.5
0.79
20
2.52
64
1.26
32
221-0459
1.000
25.4
-16
M33 x 1.5
0.87
22
2.52
64
0.98
25
BSPP Male (60° Cone)
C
Seal is required with a port connection only. No seal is required with a BSPP Female Swivel 60° Cone or Spherical Seat. PART NUMBER Thread A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
124-2172
0.250
6.4
-4
1/4
- 19
-4
1.89
48
1.05
27 6V-0405
124-2173
0.375
9.5
-6
3/8
- 19
-6
2.17
55
1.19
30 6V-0406
154-0111
0.375
9.5
-6
1/2
- 14
-8
2.32
59
1.33
34 6V-0407
124-2174
0.500
12.7
-8
1/2
- 14
-8
2.40
61
1.39
35 6V-0407
124-2330
0.500
12.7
-8
3/4
- 14
-12
2.60
66
1.61
41 6V-0408
154-0112
0.625
15.9
-10
5/8
- 14
-10
2.52
64
1.53
39 8C-6504
124-2175
0.750
19.1
-12
3/4
- 14
-12
2.80
71
1.58
40 6V-0405
124-2321
1.000
25.4
-16
1 - 11
-16
3.31
84
1.80
46 6V-0409
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
126
C CUT-OFF FACTOR DOWTY (in) (mm) SEAL
Permanent Couplings (716, 294, 844) Caterpillar Low and Medium Pressure Hose Products
BSPP Spherical Seat - Female Swivel B C THREAD A
PART NUMBER
HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2291
0.250
6.4
-4
1/4
- 19
-4
1.69
43
0.87
22
124-2292
0.375
9.5
-6
3/8
- 19
-6
2.01
51
1.01
26
154-0113
0.375
9.5
-6
1/2
- 14
-8
2.17
55
1.17
30
124-2293
0.500
12.7
-8
1/2
- 14
-8
2.20
56
1.19
30
154-0114
0.625
15.9
-10
5/8
- 14
-10
2.09
53
1.09
28
124-2294
0.750
19.1
-12
3/4
- 14
-12
2.40
61
1.18
30
124-2295
1.000
25.4
-16
1 - 11
-16
2.64
67
1.13
29
124-2337
1.250
31.8
-20
1 1/4 - 11
-20
3.43
87
1.71
43
NOTE: Interchangeable with JIS 60° Cone Female Swivel.
BSPP Spherical Seat - Female Swivel - 45° Elbow B C THREAD A
D
PART NUMBER
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-2296
0.250
6.4
-4
1/4
- 19
-4
2.28
58
1.46
37
0.69
18
124-2297
0.375
9.5
-6
3/8
- 19
-6
2.80
71
1.78
45
0.79
20
- 14
-8
2.95
75
1.95
50
0.79
20
- 14
-12
3.86
98
2.62
67
1.14
29
1 - 11
-16
4.61
117
3.09
79
1.17
30
124-2298
0.500
12.7
-8
1/2
124-2299
0.750
19.1
-12
3/4
124-2300
1.000
25.4
-16
NOTE: Interchangeable with JIS 60° Cone Female Swivel.
BSPP Spherical Seat - Female Swivel - 90° Elbow B C
D
PART NUMBER HEX
THREAD A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-2301
0.250
6.4
-4
1/4
- 19
-4
1.81
46
0.99
25
1.19
30
124-2302
0.375
9.5
-6
3/8
- 19
-6
2.28
58
1.28
33
1.46
37
124-2303
0.500
12.7
-8
1/2
- 14
-8
2.52
64
1.53
39
1.48
38
124-2304
0.750
19.1
-12
3/4
- 14
-12
3.31
84
2.07
53
2.32
59
124-2305
1.000
25.4
-16
1 - 11
-16
4.29
109
2.80
71
2.54
65
124-2306
1.250
31.8
-20
1 1/4 - 11
-20
5.08
129
3.47
88
3.18
81
NOTE: Interchangeable with JIS 60° Cone Female Swivel.
French Gaz Male B C
PART NUMBER
THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2307
0.313
7.9
-5
M20 x 1.5
0.51
13
2.13
54
1.09
28
124-2308
0.375
9.5
-6
M20 x 1.5
0.51
13
2.24
57
1.24
31
124-2309
0.500
12.7
-8
M24 x 1.5
0.67
17
2.20
56
1.20
31
124-2310
0.625
15.9
-10
M30 x 1.5
0.83
21
2.28
58
1.28
33
124-2311
0.750
19.1
-12
M36 x 1.5
1.06
27
2.60
66
1.37
35
127
French Gaz Male (continued) B C
PART NUMBER
124-2312 THREAD A
HOSE I.D. (in) (mm)
1.000
25.4
HOSE DASH SIZE
A THREAD SIZE
-16
M45 x 1.5
A TUBE O.D. (in) (mm)
1.34
34
B LENGTH (in) (mm)
3.07
78
C CUT-OFF FACTOR (in) (mm)
1.57
40
HEX
French Gaz Female Swivel B C THREAD A
PART NUMBER
HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
124-2313
0.313
7.9
-5
M20 x 1.5
0.51
13
2.13
54
1.10
28
124-2314
0.375
9.5
-6
M20 x 1.5
0.51
13
2.17
55
1.17
30
124-2315
0.500
12.7
-8
M24 x 1.5
0.67
17
2.44
62
1.44
37
124-2316
0.625
15.9
-10
M30 x 1.5
0.83
21
2.32
59
1.33
34
124-2317
0.750
19.1
-12
M36 x 1.5
1.06
27
2.76
70
1.52
39
124-2318
1.000
25.4
-16
M45 x 1.5
1.34
34
3.15
80
1.64
42
French Millimetric Female Swivel B C THREAD A
PART NUMBER
HEX 1
HEX 2
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
0.250
6.4
-4
M12 x 1.0
0.24
6
1.77
45
0.95
24
124-2324
0.375
9.5
-6
M20 x 1.5
0.55
14
2.20
56
1.20
31
124-2326
0.750
19.1
-12
M30 x 1.5
0.87
22
2.52
64
1.30
33
124-2327
1.000
25.4
-16
M39 x 1.5
1.18
30
2.99
76
1.48
38
B C
PART NUMBER
128
C CUT-OFF FACTOR (in) (mm)
124-2319
Captive Flange - SAE Code 61 - 2 Hole
A
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A HEAD SIZE (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
183-5181
0.250
6.4
-4
0.94
23.8
1.89
48
1.06
27
255-4886
1.000
25.4
-16
1.75
44.5
3.35
85
1.85
47
Permanent Couplings (716, 294, 844) Caterpillar Low and Medium Pressure Hose Products
Captive Flange - SAE Code 61 - 2 Hole - 90° Elbow B C
PART NUMBER D
183-5180
HOSE I.D. (in) (mm)
0.250
6.4
HOSE DASH SIZE
-4
A HEAD SIZE (in) (mm)
0.94
23.8
B LENGTH (in) (mm)
1.93
49
C CUT-OFF FACTOR (in) (mm)
1.15
29
D DROP (in) (mm)
1.25
32
A
129
Caterpillar Low and Medium Pressure Hose Products
Permanent Couplings (716, 294, 844)
130
Caterpillar Special Application Hose Products
131
Caterpillar Special Application Hose Products
Thermoplastic Hose (1028) and Couplings........................................................................ 133 Thermoplastic Hose (1028)............................................................................................ 134 Permanent Couplings (1028)..........................................................................................135 NPTF...........................................................................................................................135 STOR.......................................................................................................................... 135 JIC 37°........................................................................................................................ 135 SAE 45°...................................................................................................................... 137 ORFS.......................................................................................................................... 137 Metric Standpipe......................................................................................................... 138 DIN 20078................................................................................................................... 139 BSPP.......................................................................................................................... 139 Reduced O.D. Thermoplastic Hose (2760) and Couplings................................................ 141 Reduced O. D. Thermoplastic Hose (2760)................................................................... 142 Permanent Couplings (2760)..........................................................................................143 NPTF...........................................................................................................................143 STOR.......................................................................................................................... 143 JIC 37°........................................................................................................................ 144 SAE 45°...................................................................................................................... 146 ORFS.......................................................................................................................... 147 BSPP.......................................................................................................................... 148 Engine & Air Brake Hose (556, 1130) and Couplings........................................................ 151 One-Wire Braid Hose - Fabric covered (556)................................................................. 152 Engine And Air Brake Hose (1130)................................................................................ 153 Reusable Couplings (556, 1130).................................................................................... 154 NPTF...........................................................................................................................154 JIC 37°........................................................................................................................ 154 SAE 45°...................................................................................................................... 155 SAE Code 61 Flange.................................................................................................. 157 ORFS.......................................................................................................................... 158 Air Conditioning Hose (1543J) and Couplings................................................................... 159 Air Conditioning Hose (1543J)........................................................................................ 160 Permanent Couplings (1543J)........................................................................................ 161 Male Inverted O-Ring Swivel...................................................................................... 161 Tube O-Ring Female Swivel....................................................................................... 161 Metric Tube O-Ring Female Swivel............................................................................ 163 Double Collet.............................................................................................................. 163 ORFS.......................................................................................................................... 163 Adapter to Self Sealing Fitting.................................................................................... 163 Service Valve Fitting................................................................................................... 165 Male Bulkhead O-Ring Connector.............................................................................. 165 SAE 45°...................................................................................................................... 166 Specialty Hose................................................................................................................... 167 Heater Hose - Standard (515A)...................................................................................... 168 Heater Hose - High Temperature (1543N)..................................................................... 168 Radiator Hose (642)....................................................................................................... 168 Hydraulic Return Hose (661).......................................................................................... 168
Caterpillar Special Application Hose Products
Caterpillar Special Application Hose Products
Air Brake Hose (662)...................................................................................................... 169
132
Thermoplastic Hose (1028) and Couplings Thermoplastic Hose (1028)................................................................................................ 134 Permanent Couplings (1028)............................................................................................. 135 NPTF.............................................................................................................................. 135 STOR..............................................................................................................................135 JIC 37°............................................................................................................................ 135 SAE 45°.......................................................................................................................... 137 ORFS..............................................................................................................................137 Metric Standpipe.............................................................................................................138 DIN 20078...................................................................................................................... 139 BSPP.............................................................................................................................. 139
Caterpillar Special Application Hose Products
133
Thermoplastic Hose (1028) Thermoplastic Hose (1028) CATERPILLAR ® 1028
Caterpillar Special Application Hose Products
Exceeds the requirement of SAE 100R7 and meets the requirements of Caterpillar 1E945. Note: Sold by the inch. HOSE I.D.
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
(mm)
(in)
(mm)
4.8
-3
0.43
10.9
12,000
82,738
3000
20,685
0.75
19
0.250
6.4
-4
0.51
13.0
11,000
75,843
2750
18,961
1.26
32
9X-2382
0.313
7.9
-5
0.57
14.5
10,000
68,948
2500
17,237
1.73
44
9X-23862
0.313
7.9
-5
0.57
14.5
10,000
68,948
2500
17,237
1.73
44
9X-2383
0.375
9.5
-6
0.65
16.5
9000
62,053
2250
15,514
2.01
51
9X-23872
0.375
9.5
-6
0.65
16.5
9000
62,053
2250
15,514
2.01
51
9X-2384
0.500
12.7
-8
0.81
20.6
8000
55,159
2000
13,790
2.99
76
9X-2385
0.750
19.1
-12
1.06
26.9
5000
34,474
1250
8619
5.00
127
(in)
9X-2380
0.188
9X-2381
HOSE O.D.
MIN. BURST PRESS. (psi) (kPa)
HOSE DASH SIZE
PART NUMBER
Construction: Elastomeric core tube, two fiber braid reinforcement, special polyester cover. All layers bonded. Application: Medium pressure service with petroleum base hydraulic fluids, water glycol, and water-oil fire resistant hydraulic fluids. Hydraulic systems exposed to very low temperatures. Ideal for use a low temperature on fork lift trucks in refrigerated warehouses, and earthmoving and agricultural machinery for cold climates. Temperature Range: -70° F to +135° F (-56° C to +70° C) for water glycol and water-oil resistant hydraulic fluids. -70° F to +212° F (-56° C to +100° C) for all other applications. Couplings: Crimp-on, swage-on permanent, non-skive type, see Permanent Couplings (1028) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings. Required Cutting Tool: Cutting Tool (177-4271) and Blade (177-4272) is required for cutting hose. Do not use Hose Cutting Machine. Cut-off saw can cause heating distortion. See Miscellaneous Tools and Accessories section. 1 Centerline of Hose 2 Twin-line Hose
134
Permanent Couplings (1028) NPTF Male B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
5P-5499
0.188
4.8
-3
1/8
- 27
-2
2.01
51
1.02
26
9X-3905
0.188
4.8
-3
1/4
- 18
-4
2.17
55
1.18
30
9X-3907
0.188
4.8
-3
3/8
- 18
-6
2.28
58
1.14
29
5P-5498
0.250
6.4
-4
1/8
- 27
-2
2.13
54
1.02
26
5P-5497
0.250
6.4
-4
1/4
- 18
-4
2.32
59
1.18
30
9X-3908
0.250
6.4
-4
3/8
- 18
-6
2.40
61
1.30
33
9X-3906
0.313
7.9
-5
1/4
- 18
-4
2.32
59
1.18
30
9X-3909
0.313
7.9
-5
3/8
- 18
-6
2.40
61
1.30
33
149-8567
0.375
9.5
-6
1/4
- 18
-4
2.17
55
1.13
29
5P-5496
0.375
9.5
-6
1/4
- 18
-4
2.60
66
1.30
33
149-8568
0.375
9.5
-6
3/8
- 18
-6
2.17
55
1.16
29
0.375
9.5
-6
- 18
-6
2.60
66
1.30
33
149-8569
0.375
9.5
-6
1/2
- 14
-8
2.36
60
1.34
34
9X-3912
0.375
9.5
-6
1/2
- 14
-8
2.83
72
1.57
40
149-8570
0.500
12.7
-8
3/8
- 18
-6
2.24
57
1.24
31
9X-3911
0.500
12.7
-8
3/8
- 18
-6
2.80
71
1.30
33
149-8571
0.500
12.7
-8
1/2
- 14
-8
2.44
62
1.43
36
5P-5495
0.500
12.7
-8
1/2
- 14
-8
3.03
77
1.42
36
5P-5494
0.750
19.1
-12
3/4
- 14
-12
3.23
82
1.41
36
Caterpillar Special Application Hose Products
9X-3910
3/8
STOR Male B C
PART NUMBER
5P-5484
HOSE I.D. (in) (mm)
0.188
4.8
HOSE DASH SIZE
-3
A THREAD SIZE 7/16
- 20
A THREAD DASH SIZE
-4
B LENGTH (in) (mm)
1.97
50
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
0.98
25 3J-7354
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
JIC 37° Male B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
5P-5493
0.250
6.4
-4
7/16
- 20
-4
2.28
58
1.18
30
149-8556
0.375
9.5
-6
9/16
- 18
-6
2.17
55
1.16
29
5P-5492
0.375
9.5
-6
9/16
- 18
-6
2.60
66
1.30
33
149-8557
0.500
12.7
-8
3/4
- 16
-8
2.40
61
1.40
36
-12
3.31
84
1.65
42
9X-3948
0.750
19.1
-12
1
1/16
- 12
135
Permanent Couplings (1028) JIC 37° Female Swivel B C
PART NUMBER
Caterpillar Special Application Hose Products
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
5P-5507
0.188
4.8
-3
7/16
- 20
-4
2.24
57
1.26
32
9X-3916
0.188
4.8
-3
1/2
- 20
-5
2.24
57
1.26
32
5P-5509
0.250
6.4
-4
7/16
- 20
-4
2.52
64
1.38
35
5P-5506
0.250
6.4
-4
1/2
- 20
-5
2.52
64
1.38
35
5P-5505
0.250
6.4
-4
9/16
- 18
-6
2.52
64
1.38
35
9X-3917
0.313
7.9
-5
1/2
- 20
-5
2.52
64
1.38
35
035-0656
0.313
7.9
-5
9/16
- 18
-6
2.52
64
1.38
35
149-8520
0.375
9.5
-6
9/16
- 18
-6
1.97
50
0.93
24
069-0478
0.375
9.5
-6
9/16
- 18
-6
2.80
71
1.50
38
149-8521
0.375
9.5
-6
3/4
- 16
-8
1.97
50
0.96
24
069-2306
0.375
9.5
-6
3/4
- 16
-8
2.80
71
1.50
38
149-8522
0.500
12.7
-8
3/4
- 16
-8
2.17
55
1.13
29
5P-5503
0.500
12.7
-8
3/4
- 16
-8
3.11
79
1.63
42
149-8523
0.500
12.7
-8
7/8
- 14
-10
2.20
56
1.18
30
5P-5504
0.500
12.7
-8
7/8
- 14
-10
3.11
79
1.63
42
149-8524
0.500
12.7
-8
1 1/16 - 12
-12
2.20
56
1.17
30
9X-3919
0.500
12.7
-8
1 1/16 - 12
-12
3.23
82
1.73
44
9X-3949
0.750
19.1
-12
-10
3.39
86
1.69
43
5P-5501
0.750
19.1
-12
-12
3.43
87
1.63
41
-16
4.06
103
1.69
43
5P-5483
1.000
25.4
-16
7/8
- 14
1 1/16 - 12 1
5/16
- 12
JIC 37° Female Swivel - 45° Elbow B C
D
A
136
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
5P-5491
0.188
4.8
-3
7/16
- 20
-4
2.48
63
1.50
38
0.31
8
9X-3922
0.250
6.4
-4
7/16
- 20
-4
2.48
63
1.50
38
0.31
8
9X-3923
0.250
6.4
-4
1/2
- 20
-5
2.48
63
1.50
38
0.35
9
035-2181
0.313
7.9
-5
9/16
- 18
-6
2.72
69
1.57
40
0.39
10
5P-5490
0.375
9.5
-6
9/16
- 18
-6
2.91
74
1.57
40
0.39
10
9X-3953
0.375
9.5
-6
9/16
- 18
-6
3.27
83
1.89
48
0.59
15
5P-5489
0.375
9.5
-6
3/4
- 16
-8
3.19
81
1.85
47
0.55
14
9X-3954
0.375
9.5
-6
3/4
- 16
-8
3.54
90
2.13
54
0.71
18
149-8533
0.500
12.7
-8
3/4
- 16
-8
2.76
70
1.73
44
0.55
14
6V-5858
0.500
12.7
-8
3/4
- 16
-8
3.39
86
1.85
47
0.55
14
149-8538
0.500
12.7
-8
3/4
- 16
-8
2.87
73
1.87
48
0.69
18
149-8534
0.500
12.7
-8
7/8
- 14
-10
2.83
72
1.82
46
0.64
16
9X-3951
0.750
19.1
-12
-12
4.06
103
2.36
60
0.79
20
1 1/16 - 12
Permanent Couplings (1028) B
JIC 37° Female Swivel - 90° Elbow
C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
9X-3926
0.188
4.8
-3
7/16
- 20
-4
2.32
59
1.38
35
0.87
22
5P-5487
0.188
4.8
-3
7/16
- 20
-4
2.20
56
1.28
33
0.87
22
9X-3924
0.188
4.8
-3
7/16
- 20
-4
2.36
60
1.38
35
2.17
55
054-2271
0.250
6.4
-4
7/16
- 20
-4
2.48
63
1.38
35
0.87
22
149-8541
0.250
6.4
-4
7/16
- 20
-4
1.93
49
0.99
25
0.87
22
5P-5488
0.250
6.4
-4
1/2
- 26
-5
2.52
64
1.46
37
0.87
22
5P-5486
0.250
6.4
-4
1/2
- 20
-5
3.62
92
1.30
33
1.81
46
035-3386
0.313
7.9
-5
9/16
- 18
-6
2.68
68
1.50
38
1.10
28
037-9239
0.313
7.9
-5
9/16
- 18
-6
2.48
63
1.38
35
2.17
55
5P-5485
0.375
9.5
-6
9/16
- 18
-6
2.87
73
1.50
38
1.10
28
6V-6222
0.375
9.5
-6
9/16
- 18
-6
2.68
68
1.38
35
2.19
56
0.375
9.5
-6
- 16
-8
2.99
76
1.61
41
1.38
35
5P-5480
0.375
9.5
-6
3/4
- 16
-8
3.03
77
1.73
44
2.44
62
149-8546
0.500
12.7
-8
3/4
- 16
-8
2.56
65
1.54
39
1.38
35
5P-7452
0.500
12.7
-8
3/4
- 16
-8
3.19
81
1.61
41
1.38
35
149-8554
0.500
12.7
-8
3/4
- 16
-8
2.56
65
1.54
39
2.44
62
5P-7453
0.500
12.7
-8
3/4
- 16
-8
3.19
81
1.73
44
2.44
62
9X-3952
0.750
19.1
-12
1 1/16 - 12
-12
4.29
109
1.54
39
2.05
52
A THREAD SIZE
A THREAD DASH SIZE
SAE 45° Female Swivel B C
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
149-8576
0.375
9.5
-6
5/8
- 18
-6
1.85
47
0.81
21
069-2120
0.375
9.5
-6
5/8
- 18
-6
2.40
61
1.10
28
ORFS Female Swivel B C
A
PART NUMBER
6V-9586
HOSE I.D. (in) (mm)
0.250
6.4
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
-4
9/16
- 18
-4
2.64
67
1.50
38 4J-5477
- 16
-6
2.60
66
1.50
38 6V-8397
9X-3955
0.250
6.4
-4
11/16
9X-3960
0.313
7.9
-5
11/16
- 16
-6
2.60
66
1.50
38 6V-8397
6V-9587
0.375
9.5
-6
11/16
- 16
-6
2.95
75
1.65
42 6V-8397
149-8475
0.375
9.5
-6
13/16
- 16
-8
2.40
61
1.37
35 6V-8398
6V-9588
0.500
12.7
-8
13/16
- 16
-8
3.31
84
1.81
46 6V-8398
149-8477
0.500
12.7
-8
1 - 14
-10
2.68
68
1.64
42 7J-9108
3/16
-12
3.86
98
2.17
55 6V-9746
6V-9589
0.750
19.1
-12
1
- 12
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
137
Caterpillar Special Application Hose Products
5P-5479
3/4
Permanent Couplings (1028) ORFS Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE 9/16
- 18
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
6V-9590
0.250
6.4
-4
-4
2.68
68
1.54
39
0.39
10 4J-5477
6V-9591
0.375
9.5
-6
1 1/16 - 16
-6
2.99
76
1.65
42
0.43
11 6V-8397
6V-9592
0.500
12.7
-8
13/16
-8
3.43
87
1.93
49
0.59
15 6V-8398
149-8486
0.500
12.7
-8
1 - 14
-10
2.83
72
1.83
47
0.65
17 7J-9108
8T-5377
0.750
19.1
-12
1 3/16 - 12
-12
3.66
93
1.97
50
0.83
21 6V-9746
- 16
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 90° Elbow B
Caterpillar Special Application Hose Products
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
6V-9593
0.250
6.4
-4
9/16
- 18
-4
2.48
63
1.38
35
0.79
20 4J-5477
6V-9597
0.250
6.4
-4
9/16
- 18
-4
2.44
62
1.30
33
1.81
46 4J-5477
090-3623
0.313
7.9
-5
11/16
- 16
-6
2.68
68
1.54
39
0.91
23 6V-8397
6V-9594
0.375
9.5
-6
11/16
- 16
-6
2.83
72
1.54
39
0.91
23 6V-8397
6V-9598
0.375
9.5
-6
11/16
- 16
-6
2.95
75
1.61
41
2.13
54 6V-8397
6V-9595
0.500
12.7
-8
13/16
- 16
-8
3.15
80
1.65
42
1.14
29 6V-8398
149-8502
0.500
12.7
-8
13/16
- 16
-8
2.56
65
1.54
39
1.51
38 6V-8398
149-8510
0.500
12.7
-8
13/16
- 16
-8
2.56
65
1.54
39
2.51
64 6V-8398
6V-9599
0.500
12.7
-8
13/16
- 16
-8
3.23
82
1.69
43
2.52
64 6V-8398
149-8496
0.500
12.7
-8
1 - 14
-10
2.56
65
1.54
39
1.27
32 7J-9108
149-8511
0.500
12.7
-8
1 - 14
-10
2.56
65
1.54
39
2.76
70 7J-9108
6V-9596
0.750
19.1
-12
1 3/16 - 12
-12
3.82
97
2.13
54
1.85
47 6V-9746
6V-9600
0.750
19.1
-12
1 3/16 - 12
-12
3.86
98
2.17
55
3.78
96 6V-9746
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Metric Standpipe B C
PART NUMBER
A
138
D DROP O-RING (in) (mm) SEAL
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
3E-4020
0.250
6.4
-4
0.31
8.00
2.60
66
1.42
36
3E-4021
0.313
7.9
-5
0.39
10.00
2.76
70
1.46
37
Permanent Couplings (1028) B C
Metric Female Swivel - Spherical Seat - Light Series (DIN 20078) PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A TUBE O.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
3E-4013
0.188
4.8
-3
M12 x 1.5
0.24
6
2.05
52
0.98
25
3E-4014
0.250
6.4
-4
M14 x 1.5
0.31
8
2.24
57
1.06
27
3E-4015
0.313
7.9
-5
M16 x 1.5
0.39
10
2.36
60
1.06
27
3E-4016
0.375
9.5
-6
M16 x 1.5
0.39
10
2.64
67
1.14
29
3E-4017
0.375
9.5
-6
M18 x 1.5
0.47
12
2.68
68
1.14
29
3E-4018
0.500
12.7
-8
M22 x 1.5
0.59
15
2.91
74
1.22
31
BSPP Spherical Seat - Female Swivel B C
PART NUMBER
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm) SEAL
3E-4025
0.188
4.8
-3
1/4
- 19
-4
1.73
44
1.10
28 6V-0405
3E-4026
0.250
6.4
-4
1/4
- 19
-4
2.24
57
1.02
26 6V-0405
3E-4027
0.313
7.9
-5
3/8
- 19
-6
2.36
60
1.06
27 6V-0406
3E-4028
0.375
9.5
-6
3/8
- 19
-6
2.56
65
1.06
27 6V-0406
3E-4029
0.500
12.7
-8
1/2
- 14
-8
2.91
74
1.22
31 6V-0407
3E-4030
0.500
12.7
-8
5/8
- 14
-10
3.27
83
1.34
34 8C-6504
Caterpillar Special Application Hose Products
A
HOSE I.D. (in) (mm)
Note: Interchangeable with JIS 60° Cone Female Swivel.
139
Caterpillar Special Application Hose Products
Permanent Couplings (1028)
140
Reduced O.D. Thermoplastic Hose (2760) and Couplings Reduced O. D. Thermoplastic Hose (2760)....................................................................... 142 Permanent Couplings (2760)............................................................................................. 143 NPTF.............................................................................................................................. 143 STOR..............................................................................................................................143 JIC 37°............................................................................................................................ 144 SAE 45°.......................................................................................................................... 146 ORFS..............................................................................................................................147 BSPP.............................................................................................................................. 148
Caterpillar Special Application Hose Products
141
Reduced O. D. Thermoplastic Hose (2760) Reduced Outside Diameter Thermoplastic Hose (2760) CATERPILLAR ® 2760
Note: Sold by the inch.
HOSE I.D.
MAX. HOSE O.D. (mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
10.7
6000
41,369
1500
10,343
1.50
38
13.5
6000
41,369
1500
10,343
1.73
44
0.57
14.5
6000
41,369
1500
10,343
2.48
63
0.70
17.7
6000
41,369
1500
10,343
2.99
76
(mm)
HOSE DASH SIZE
(in)
6.4
-4
0.42
0.313
7.9
-5
0.53
135-7855
0.375
9.5
-6
135-7856
0.500
12.7
-8
PART NUMBER
(in)
135-7853
0.250
135-7854
MIN. BEND RADIUS 1 (in) (mm)
Construction: Thermoplastic or synthetic rubber inner tube resistant to hydraulic fluids with suitable fibers or wire reinforcement and a hydraulic fluid and weather resistant thermoplastic or synthetic rubber cover. Application: Medium pressure use with petroleum or water base, and synthetic hydraulic fluids. Temperature Range: -40° F to +212° F (-40° C to +100° C). Couplings: Crimp-on permanent, non-skive type, see Permanent Couplings (2760) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings. Required Cutting Tool: Cutting Tool (177-4271) and Blade (177-4272) is required for cutting hose. Do not use Hose Cutting Machine. Cut-off saw can cause heating distortion. See Miscellaneous Tools and Accessories section.
Caterpillar Special Application Hose Products
1 Centerline of Hose
142
Permanent Couplings (2760) NPTF Male B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
146-3404
0.250
6.4
-4
1/8
- 27
-2
1.50
38
0.87
22
146-3405
0.250
6.4
-4
1/4
- 18
-4
1.77
45
1.14
29
146-3406
0.250
6.4
-4
3/8
- 18
-6
1.77
45
1.10
28
146-3407
0.313
7.9
-5
1/4
- 18
-4
1.85
47
1.08
27
146-3408
0.375
9.5
-6
1/4
- 18
-4
1.89
48
1.08
27
146-3409
0.375
9.5
-6
3/8
- 18
-6
1.93
49
1.12
29
146-3410
0.375
9.5
-6
1/2
- 14
-8
2.13
54
1.30
33
146-3411
0.500
12.7
-8
1/2
- 14
-8
2.17
55
1.33
34
NPTF Male - Swivel B
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
Caterpillar Special Application Hose Products
C
C CUT-OFF FACTOR (in) (mm)
178-9166
0.250
6.4
-4
1/8
- 27
-2
2.09
53
1.43
36
146-3412
0.250
6.4
-4
1/4
- 18
-4
2.28
58
1.61
41
146-3413
0.375
9.5
-6
1/4
- 18
-4
2.40
61
1.59
40
146-3414
0.375
9.5
-6
3/8
- 18
-6
2.40
61
1.58
40
146-3415
0.375
9.5
-6
1/2
- 14
-8
2.68
68
1.88
48
146-3416
0.500
12.7
-8
3/8
- 18
-6
2.44
62
1.61
41
146-3417
0.500
12.7
-8
1/2
- 14
-8
2.72
69
1.90
48
STOR Male
B C
PART NUMBER THREAD A
HEX
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
146-3419
0.250
6.4
-4
7/16
- 20
-4
1.54
39
0.87
22 3J-7354
146-3420
0.375
9.5
-6
9/16
- 18
-6
1.69
43
0.89
23 3J-1907
146-3421
0.375
9.5
-6
3/4
- 16
-8
1.85
47
1.06
27 3K-0360
146-3422
0.500
12.7
-8
3/4
- 16
-8
1.89
48
1.08
27 3K-0360
146-3423
0.500
12.7
-8
7/8
- 14
-10
1.89
48
1.08
27 2M-9780
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
STOR Male - Swivel B C
PART NUMBER
146-3424
HOSE I.D. (in) (mm)
0.375
9.5
HOSE DASH SIZE
-6
A THREAD SIZE 9/16
- 18
A THREAD DASH SIZE
-6
B LENGTH (in) (mm)
2.64
67
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
1.83
47 3J-1907
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. THREAD A
HEX
143
Permanent Couplings (2760) B C
A
D
STOR Male - Swivel - 90° Block PART NUMBER
146-3426
HOSE I.D. (in) (mm)
0.375
9.5
HOSE DASH SIZE
A THREAD SIZE 9/16
-6
A THREAD DASH SIZE
- 18
B LENGTH (in) (mm)
-6
1.61
41
C CUT-OFF FACTOR (in) (mm)
0.81
21
D DROP O-RING (in) (mm) SEAL
1.78
45 3J-1907
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
JIC 37° Male B C
Caterpillar Special Application Hose Products
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
146-3400
0.250
6.4
-4
7/16
- 20
-4
2.36
60
1.69
43
146-3401
0.250
6.4
-4
9/16
- 18
-6
1.81
46
1.15
29
146-3402
0.375
9.5
-6
9/16
- 18
-6
1.93
49
1.11
28
146-3403
0.500
12.7
-8
3/4
- 16
-8
2.13
54
1.30
33
JIC 37° Female Swivel B C
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
146-3367
0.250
6.4
-4
7/16
- 20
-4
1.26
32
0.67
17
253-1371
0.250
6.4
-4
9/16
- 18
-6
1.42
36
0.75
19
146-3447
0.313
7.9
-5
9/16
- 18
-6
1.57
40
0.71
18
146-3368
0.375
9.5
-6
9/16
- 18
-6
1.57
40
0.79
20
146-3369
0.500
12.7
-8
3/4
- 16
-8
1.61
41
0.79
20
146-3449
0.500
12.7
-8
7/8
- 14
-10
1.81
46
0.86
22
JIC 37° Female Swivel - 45° Elbow B C
D
A
144
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
146-3370
0.250
6.4
-4
7/16
- 20
-4
1.81
46
1.13
29
0.33
8
146-3448
0.313
7.9
-5
9/16
- 18
-4
2.05
52
1.26
32
0.39
10
146-3371
0.313
7.9
-5
1/2
- 20
-5
2.01
51
1.22
31
0.36
9
9.5
-6
9/16
- 18
-6
2.17
55
1.34
34
0.39
10
146-3372
0.375
146-3374
0.375
9.5
-6
9/16
- 18
-6
2.36
60
1.54
39
0.59
15
146-3373
0.500
12.7
-8
3/4
- 16
-8
2.52
64
1.70
43
0.55
14
146-3375
0.500
12.7
-8
3/4
- 16
-8
2.68
68
1.84
47
0.69
18
146-3376
0.500
12.7
-8
3/4
- 16
-8
2.87
73
2.05
52
0.91
23
146-3450
0.500
12.7
-8
7/8
- 14
-10
2.60
66
1.78
45
0.64
16
Permanent Couplings (2760) B
JIC 37° Female Swivel - 65° Elbow
C
PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
146-3377
0.375
9.5
-6
9/16
- 18
-6
2.91
74
2.09
53
2.24
57
146-3378
0.375
9.5
-6
9/16
- 18
-6
3.07
78
2.24
57
2.56
65
A
JIC 37° Female Swivel - 80° Elbow
B C
PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
0.375
9.5
-6
9/16
- 18
-6
2.20
56
1.38
35
1.38
35
146-3381
0.375
9.5
-6
9/16
- 18
-6
2.36
60
1.57
40
2.32
59
A
B
JIC 37° Female Swivel - 90° Elbow
C
PART NUMBER D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
146-3382
0.250
6.4
-4
7/16
- 20
-4
1.69
43
1.06
27
0.71
18
146-3386
0.250
6.4
-4
7/16
- 20
-4
1.69
43
1.02
26
0.88
22
146-3379
0.250
6.4
-4
7/16
- 20
-4
1.69
43
1.06
27
1.06
27
146-3391
0.250
6.4
-4
7/16
- 20
-4
1.69
43
1.02
26
1.75
45
146-3418
0.250
6.4
-4
7/16
- 20
-4
1.69
43
1.06
27
1.97
50
A
146-3392
0.250
6.4
-4
7/16
- 20
-4
1.69
43
1.06
27
2.48
63
146-3383
0.313
7.9
-5
9/16
- 18
-6
1.93
49
1.12
29
0.86
22
146-3384
0.375
9.5
-6
9/16
- 18
-6
2.05
52
1.26
32
0.87
22
146-3387
0.375
9.5
-6
9/16
- 18
-6
2.05
52
1.26
32
1.10
28
146-3393
0.375
9.5
-6
9/16
- 18
-6
2.05
52
1.26
32
2.20
56
146-3388
0.375
9.5
-6
3/4
- 16
-8
2.05
52
1.24
32
1.38
35
146-3394
0.375
9.5
-6
3/4
- 16
-8
2.05
52
1.26
32
2.52
64
146-3385
0.500
12.7
-8
3/4
- 16
-8
2.32
59
1.50
38
1.10
28
146-3389
0.500
12.7
-8
3/4
- 16
-8
2.32
59
1.51
38
1.38
35
146-3398
0.500
12.7
-8
3/4
- 16
-8
2.32
59
1.50
38
1.81
46
146-3395
0.500
12.7
-8
3/4
- 16
-8
2.32
59
1.50
38
2.52
64
146-3390
0.500
12.7
-8
7/8
- 14
-10
2.32
59
1.51
38
1.75
45
146-3396
0.500
12.7
-8
7/8
- 14
-10
2.32
59
1.51
38
3.06
78
145
Caterpillar Special Application Hose Products
146-3380
Permanent Couplings (2760) JIC 37° Male Bulkhead B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
146-3445
0.250
6.4
-4
7/16
- 20
-4
2.36
60
1.69
43
146-3444
0.375
9.5
-6
9/16
- 18
-6
2.72
69
1.89
48
HEX
JIC 37° Female Swivel - 90° Block
B
THREAD A C
HEX
PART NUMBER
0.500
12.7
HOSE DASH SIZE
-8
A THREAD SIZE 3/4
- 16
A THREAD DASH SIZE
-8
B LENGTH (in) (mm)
1.73
44
C CUT-OFF FACTOR (in) (mm)
0.91
23
D DROP (in) (mm)
0.87
22
SAE 45° Inverted Flare Male Swivel B C
PART NUMBER THREAD A HEX 1 HEX 2
B
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
146-3428
0.250
6.4
-4
7/16
- 24
-4
1.73
44
1.04
27
146-3429
0.250
6.4
-4
1/2
- 20
-5
1.77
45
1.11
28
146-3430
0.375
9.5
-6
5/8
- 18
-6
1.93
49
1.13
29
146-3431
0.500
12.7
-8
3/4
- 18
-8
2.05
52
1.24
32
SAE 45° Inverted Flare Male Swivel - 90° Elbow
C
PART NUMBER D
Caterpillar Special Application Hose Products
146-3399
HOSE I.D. (in) (mm)
HEX THREAD A
146
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
146-3432
0.250
6.4
-4
7/16
- 24
-4
1.69
43
1.02
26
1.38
35
146-3433
0.250
6.4
-4
1/2
- 20
-5
1.69
43
1.02
26
1.38
35
- 18
-6
2.05
52
1.24
32
1.50
38
- 18
-8
2.32
59
1.51
38
1.81
46
146-3434
0.375
9.5
-6
5/8
146-3435
0.500
12.7
-8
3/4
Permanent Couplings (2760) SAE 45° Female Swivel B C
THREAD A
PART NUMBER
146-3427 HEX 2
HOSE I.D. (in) (mm)
0.375
HOSE DASH SIZE
9.5
A THREAD DASH SIZE
A THREAD SIZE 5/8
-6
- 18
-6
B LENGTH (in) (mm)
1.46
37
C CUT-OFF FACTOR (in) (mm)
0.64
16
HEX 1
ORFS Female Swivel B THREAD A
C
PART NUMBER
146-3338 HEX 1
0.250
HOSE DASH SIZE
6.4
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
-4
9/16
- 18
-4
1.65
42
0.98
25 4J-5477
- 16
-6
1.73
44
1.06
27 6V-8397
146-3350
0.250
6.4
-4
11/16
146-3339
0.313
7.9
-5
11/16
- 16
-6
1.81
46
1.02
26 6V-8397
146-3340
0.375
9.5
-6
11/16
- 16
-6
1.85
47
1.02
26 6V-8397
146-3341
0.500
12.7
-8
11/16
- 16
-6
2.24
57
1.41
36 6V-8397
146-3342
0.500
12.7
-8
13/16
- 16
-8
2.05
52
1.22
31 6V-8398
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 45° Elbow B C
PART NUMBER
D
146-3343 A
HOSE I.D. (in) (mm)
0.250
6.4
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
-4
9/16
- 18
-4
2.13
54
1.19
30
0.41
10 4J-5477
146-3446
0.250
6.4
-4
11/16
- 16
-6
1.89
48
1.21
31
0.41
10 6V-8397
146-3344
0.313
7.9
-5
11/16
- 16
-6
2.09
53
1.30
33
0.43
11 6V-8397
146-3345
0.375
9.5
-6
11/16
- 16
-6
2.20
56
1.38
35
0.43
11 6V-8397
146-3397
0.375
9.5
-6
11/16
- 16
-6
2.48
63
1.65
42
0.71
18 6V-8397
146-3346
0.500
12.7
-8
13/16
- 16
-8
2.56
65
1.73
44
0.59
15 6V-8398
146-3347
0.500
12.7
-8
13/16
- 16
-8
2.87
73
2.05
52
0.91
23 6V-8398
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
ORFS Female Swivel - 65 1/2° Elbow
C
PART NUMBER
D
146-3348 146-3349 A
HOSE I.D. (in) (mm)
0.375 0.375
9.5 9.5
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
-6
11/16
- 16
-6
2.95
75
2.17
55
2.40
61 6V-8397
-6
11/16
- 16
-6
3.07
78
2.24
57
2.60
66 6V-8397
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
147
Caterpillar Special Application Hose Products
HEX 2
HOSE I.D. (in) (mm)
Permanent Couplings (2760) B
ORFS Female Swivel - 80° Elbow
C
PART NUMBER
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
146-3351
0.375
9.5
-6
11/16
- 16
-6
2.20
56
1.42
36
1.38
35 6V-8397
146-3352
0.375
9.5
-6
11/16
- 16
-6
2.36
60
1.57
40
2.32
59 6V-8397
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
A
ORFS Female Swivel - 90° Elbow B C
PART NUMBER
Caterpillar Special Application Hose Products
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
146-3353
0.250
6.4
-4
9/16
- 18
-4
1.69
43
1.06
27
0.79
20 4J-5477
146-3360
0.250
6.4
-4
9/16
- 18
-4
1.69
43
1.06
27
1.26
32 4J-5477
146-3364
0.250
6.4
-4
9/16
- 18
-4
1.69
43
1.06
27
1.81
46 4J-5477
146-3354
0.250
6.4
-4
11/16
- 16
-6
1.69
43
1.05
27
0.90
23 4J-5477
146-3355
0.313
7.9
-5
11/16
- 16
-6
1.93
49
1.14
29
0.91
23 6V-8397
146-3356
0.313
7.9
-5
11/16
- 16
-6
1.93
49
1.14
29
1.14
29 6V-8397
146-3357
0.375
9.5
-6
11/16
- 16
-6
2.05
52
1.26
32
0.91
23 6V-8397
146-3358
0.375
9.5
-6
11/16
- 16
-6
2.05
52
1.26
32
1.22
31 6V-8397
146-3361
0.375
9.5
-6
11/16
- 16
-6
2.05
52
1.26
32
1.54
39 6V-8397
146-3365
0.375
9.5
-6
11/16
- 16
-6
2.05
52
1.26
32
2.13
54 6V-8397
146-3359
0.500
12.7
-8
13/16
- 16
-8
2.32
59
1.50
38
1.14
29 6V-8398
146-3363
0.500
12.7
-8
13/16
- 16
-8
2.32
59
1.50
38
1.38
35 6V-8398
146-3362
0.500
12.7
-8
13/16
- 16
-8
2.32
59
1.50
38
1.61
41 6V-8398
146-3366
0.500
12.7
-8
13/16
- 16
-8
2.32
59
1.50
38
2.52
64 6V-8398
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
BSPP Spherical Seat - Female Swivel C
B PART NUMBER
A
148
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
146-3436
0.250
6.4
-4
1/4
- 19
-4
1.54
39
0.84
21
146-3437
0.313
7.9
-5
3/8
- 19
-6
1.61
41
0.82
21
146-3438
0.375
9.5
-6
3/8
- 19
-6
1.65
42
0.83
21
146-3439
0.500
12.7
-8
1/2
- 14
-8
1.69
43
0.88
22
Permanent Couplings (2760) BSPP Spherical Seat - Female Swivel - 45° Elbow C
B
PART NUMBER
A
B C
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
146-3440
0.250
6.4
-4
1/4
- 19
-4
2.17
55
1.48
38
0.69
18
146-3441
0.500
12.7
-8
1/2
- 14
-8
2.76
70
1.93
49
0.79
20
BSPP Spherical Seat - Female Swivel - 90° Elbow PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
0.250
6.4
-4
1/4
- 19
-4
1.69
43
1.02
26
1.19
30
146-3443
0.500
12.7
-8
1/2
- 14
-8
2.32
59
1.51
38
1.48
38
A
149
Caterpillar Special Application Hose Products
146-3442
Caterpillar Special Application Hose Products
Permanent Couplings (2760)
150
Engine & Air Brake Hose (556, 1130) and Couplings One-Wire Braid Hose - Fabric covered (556)..................................................................... 152 Engine And Air Brake Hose (1130).................................................................................... 153 Reusable Couplings (556, 1130)........................................................................................154 NPTF.............................................................................................................................. 154 JIC 37°............................................................................................................................ 154 SAE 45°.......................................................................................................................... 155 SAE Code 61 Flange...................................................................................................... 157 ORFS..............................................................................................................................158
Caterpillar Special Application Hose Products
151
One-Wire Braid Hose - Fabric covered (556) One-Wire Braid Hose - Fabric Covered (556) CATERPILLAR ® 556
Caterpillar Special Application Hose Products
Exceeds the requirement of SAE 100R5. Note: Sold by the inch.
HOSE I.D.
MAX. WORK. PRESS. (psi) (kPa)
MIN. BEND RADIUS 1 (in) (mm)
(mm)
(in)
(mm)
4.8
-4
0.52
13.2
12,000
82,738
3000
20,685
2.99
0.250
6.4
-5
0.58
14.7
12,000
82,738
3000
20,685
3.39
86
9X-2364
0.313
7.9
-6
0.68
17.3
9000
62,053
2250
15,514
4.02
102
9X-2365
0.406
10.3
-8
0.77
19.6
8000
55,159
2000
13,790
4.61
117
9X-2366
0.500
12.7
-10
0.92
23.4
7000
48,264
1750
12,066
5.51
140
9X-2367
0.625
15.9
-12
1.08
27.4
6000
41,369
1500
10,343
6.50
165
9X-2368
0.875
22.2
-16
1.23
31.2
3200
22,064
800
5516
7.36
187
9X-2369
1.125
28.6
-20
1.50
38.1
2500
17,237
625
4310
9.02
229
9X-2370
1.375
34.9
-24
1.75
44.5
2000
13,790
500
3448
10.51
267
(in)
9X-2362
0.188
9X-2363
HOSE O.D.
MIN. BURST PRESS. (psi) (kPa)
HOSE DASH SIZE
PART NUMBER
76
Construction: Synthetic rubber tube, textile inner braid, high tensile steel wire braid reinforcement, textile braid cover. Application: Medium pressure service with petroleum base hydraulic fluids, water-glycol and water-oil fire resistant hydraulic fluids, water, crude and fuel oils, not oil, diesel fuels, anti-freeze solutions, air. D.O.T. FMVSS 106 All Air Brake Approved. Temperature Range: -40° F to +158° F (-40° C to +70° C) for air and anti-freeze solutions. -40° F to +185° F (-40° C to +85° C) for water glycol and water-oil fire resistant hydraulic fluids, water, crude and fuel oils, hot oil, and diesel fuels. -20° F to +250° F (-29° C to +120° C) for all other applications. Usage at temperatures exceeding +200° F (+120° C) is based on reduced working pressure. Couplings: Screw-type reusable, non-skive type, see Reusable Couplings (556, 1130) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings. 1 Centerline of Hose
Assembly Instructions
Place socket in vise. Thread hose counterclockwise into socket until hose bottoms. Back off 1/2 turn.
152
Oil nipple threads and inside of hose with heavy oil. Caution: Do not oil hose cover.
Thread nipple clockwise into socket until nipple hex shoulders against socket.
Engine And Air Brake Hose (1130) Engine And Air Brake Hose (1130) CATERPILLAR ® 1130
Exceeds the requirement of SAE J1402. Note: Sold by the inch.
(mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
13.2
6000
41,369
1500
10,343
0.75
19
14.7
6000
41,369
1500
10,343
0.98
25
0.68
17.3
6000
41,369
1500
10,343
1.26
32
-8
0.77
19.6
5000
34,474
1250
8619
1.73
44
12.7
-10
0.92
23.4
4000
27,580
1000
6895
2.24
57
0.625
15.9
-12
1.08
27.4
3000
20,685
750
5172
2.76
70
0.875
22.2
-16
1.23
31.2
1600
11,032
400
2758
3.50
89
9X-2378
1.125
28.6
-20
1.50
38.1
1200
8274
300
2069
4.49
114
9X-2379
1.375
34.9
-24
1.75
44.5
1000
6895
250
1724
7.52
191
HOSE I.D. (mm)
HOSE DASH SIZE
(in)
4.8
-4
0.52
0.250
6.4
-5
0.58
9X-2373
0.313
7.9
-6
9X-2374
0.406
10.3
9X-2375
0.500
9X-2376 9X-2377
PART NUMBER
(in)
9X-2371
0.188
9X-2372
HOSE O.D.
MIN. BEND RADIUS 1 (in) (mm)
1 Centerline of Hose
Assembly Instructions
Place socket in vise. Thread hose counterclockwise into socket until hose bottoms. Back off 1/2 turn.
Oil nipple threads and inside of hose with heavy oil. Caution: Do not oil hose cover.
Thread nipple clockwise into socket until nipple hex shoulders against socket.
153
Caterpillar Special Application Hose Products
Construction: Synthetic rubber tube, textile inner braid, high tensile steel wire braid reinforcement, textile braid cover. Application: Air, engine oil, water, lubricating oils, diesel fuel, petroleum base hydraulic oils D.O.T. FMVSS 106 All Air Brake approved. U.S. Coast Guard 46CFR56.60-25C approved. Temperature Range: -40° F to +158° F (-40°C to +70° C) for air. -40° F to +185° F (-40° C to +85° C) for water based fluids. -40° F to +275° F(-40° C to +135° C) for all other applications. Couplings: Screw-type reusable, non-skive type, see Reusable Couplings (556, 1130) section. For related assembly equipment and tooling, see Tooling section. Note: Hose cover does not need to be removed before attaching couplings.
Reusable Couplings (556, 1130) NPTF Male B C PART NUMBER
Caterpillar Special Application Hose Products
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
1L-3664
0.188
4.8
-4
1/8
- 27
-2
1.69
43
0.94
24
1L-2287
0.188
4.8
-4
1/4
- 18
-4
1.85
47
1.10
28
9X-3807
0.250
6.4
-5
1/8
- 27
-2
1.77
45
0.98
25
9X-3808
0.250
6.4
-5
1/4
- 18
-4
1.97
50
1.18
30
9X-3809
0.313
7.9
-6
1/4
- 18
-4
2.13
54
1.22
31
9X-3810
0.313
7.9
-6
3/8
- 18
-6
2.13
54
1.22
31
1L-1699
0.406
10.3
-8
3/8
- 18
-6
2.48
63
1.34
34
9X-3812
0.406
10.3
-8
1/2
- 14
-8
2.72
69
1.57
40
9X-3813
0.500
12.7
-10
1/2
- 14
-8
2.87
73
1.57
40
9X-3814
0.500
12.7
-10
3/4
- 14
-12
2.95
75
1.65
42
9X-3815
0.625
15.9
-12
3/4
- 14
-12
3.23
82
1.65
42
3/4
- 14
9X-3816
0.875
22.2
-16
-12
2.80
71
1.54
39
1L-1480
0.875
22.2
-16
1 - 11 1/2
-16
2.99
76
1.73
44
3L-3870
1.125
28.6
-20
1 1/4 - 11 1/2
-20
3.23
82
1.89
48
1L-0767
1.375
34.9
-24
1 1/2 - 11 1/2
-24
3.46
88
2.05
52
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
JIC 37° Male
B C
PART NUMBER
A
HOSE I.D. (in) (mm)
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
068-0601
0.313
7.9
-6
9/16
- 18
-6
2.13
54
1.22
31
068-0554
0.406
10.3
-8
3/4
- 16
-8
2.60
66
1.42
36
9X-3947
0.875
22.2
-16
1 5/16 - 12
-16
2.95
75
1.77
45
A THREAD SIZE
A THREAD DASH SIZE
JIC 37° Female Swivel B C
A
154
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
001-6285
0.188
4.8
-4
7/16
- 20
-4
1.61
41
0.98
25
9X-3821
0.250
6.4
-5
7/16
- 20
-4
1.73
44
0.94
24
053-2295
0.250
6.4
-5
1/2
- 20
-5
1.73
44
0.98
25
9X-3823
0.250
6.4
-5
9/16
- 18
-6
1.85
47
1.10
28
001-6286
0.313
7.9
-6
9/16
- 18
-6
1.97
50
1.06
27
001-6287
0.406
10.3
-8
3/4
- 16
-8
2.44
62
1.18
30
9X-3826
0.500
12.7
-10
3/4
- 16
-8
2.56
65
1.26
32
061-6746
0.500
12.7
-10
7/8
- 14
-10
2.60
66
1.30
33
9X-3957
0.500
12.7
-10
-12
2.56
65
1.34
34
5P-7759
0.625
15.9
-12
7/8
-10
2.87
73
1.50
38
1/16
1 1/16 - 12 - 14
001-6289
0.625
15.9
-12
1
- 12
-12
2.60
66
1.34
34
9X-3830
0.875
22.2
-16
1 5/16 - 12
-16
2.60
66
1.34
34
3L-9762
1.125
28.6
-20
1 5/8 - 12
-20
2.91
74
1.57
40
9X-3832
1.375
34.9
-24
1 7/8 - 12
-24
3.19
81
1.73
44
Reusable Couplings (556, 1130) JIC 37° Female Swivel - 45° Elbow B C
PART NUMBER
D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
9X-3854
0.188
4.8
-4
7/16
- 20
-4
1.85
47
1.10
28
0.31
9X-3855
0.250
6.4
-5
1/2
- 20
-5
2.09
53
1.30
33
0.35
9
068-0599
0.313
7.9
-6
9/16
- 18
-6
2.24
57
1.38
35
0.39
10
9X-3857
0.313
7.9
-6
3/4
- 16
-8
2.68
68
1.73
44
0.55
14
068-2859
0.406
10.3
-8
3/4
- 16
-8
2.99
76
1.89
48
0.55
14
9X-3859
0.500
12.7
-10
7/8
- 14
-10
3.35
85
2.13
54
0.63
16
9X-3860
0.625
15.9
-12
1 1/16 - 12
-12
3.78
96
2.44
62
0.79
20
9X-3861
0.875
22.2
-16
1 5/16 - 12
-16
3.70
94
2.52
64
0.91
23
8
JIC 37° Female Swivel - 90° Elbow B C
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
068-0589
0.188
4.8
-4
7/16
- 20
-4
1.73
44
0.98
25
0.67
17
9X-3870
0.188
4.8
-4
7/16
- 20
-4
1.73
44
0.98
25
1.81
46
9X-3863
0.250
6.4
-5
1/2
- 20
-5
1.97
50
1.18
30
0.71
18
9X-3871
0.250
6.4
-5
1/2
- 20
-5
1.97
50
1.18
30
1.77
45
068-0009
0.313
7.9
-6
9/16
- 18
-6
2.20
56
1.38
35
0.87
22
032-4872
0.313
7.9
-6
9/16
- 18
-6
2.13
54
1.22
31
2.17
55
068-0556
0.406
10.3
-8
3/4
- 16
-8
2.83
72
1.77
45
1.10
28
111-7666
0.406
10.3
-8
3/4
- 16
-8
2.91
74
1.85
47
2.44
62
053-2141
0.500
12.7
-10
7/8
- 14
-10
3.19
81
1.97
50
1.22
31
9X-3874
0.500
12.7
-10
7/8
- 14
-10
3.27
83
2.05
52
2.56
65
9X-3867
0.625
15.9
-12
1 1/16 - 12
-12
3.90
99
2.40
61
1.81
46
9X-3875
0.625
15.9
-12
1 1/16 - 12
-12
3.78
96
2.28
58
3.74
95
5/16
9X-3868
0.875
22.2
-16
1
- 12
-16
3.70
94
2.52
64
2.13
54
9X-3876
0.875
22.2
-16
1 5/16 - 12
-16
3.54
90
2.36
60
4.33
110
9X-3869
1.125
28.6
-20
1 5/8 - 12
-20
4.02
102
2.64
67
2.36
60
SAE 45° Inverted Flare Male Swivel B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
9X-3852
0.188
4.8
-4
7/16
- 24
-4
2.44
62
1.69
43
9X-3853
0.313
7.9
-6
5/8
- 18
-6
2.72
69
1.81
46
9X-3956
0.406
10.3
-8
3/4
- 18
-8
3.15
80
1.97
50
155
Caterpillar Special Application Hose Products
PART NUMBER
Reusable Couplings (556, 1130) SAE 45° Inverted Flare Male Swivel - 45° Elbow B C
PART NUMBER D
9X-3877
HOSE I.D. (in) (mm)
0.313
7.9
HOSE DASH SIZE
-6
A THREAD SIZE 5/8
- 18
A THREAD DASH SIZE
-6
B LENGTH (in) (mm)
2.99
76
C CUT-OFF FACTOR (in) (mm)
2.09
53
D DROP (in) (mm)
0.94
24
A
B
SAE 45° Inverted Flare Male Swivel - 90° Elbow
C
PART NUMBER
Caterpillar Special Application Hose Products
D
9X-3878
HOSE I.D. (in) (mm)
0.313
7.9
HOSE DASH SIZE
-6
A THREAD SIZE 5/8
- 18
A THREAD DASH SIZE
-6
B LENGTH (in) (mm)
2.64
67
C CUT-OFF FACTOR (in) (mm)
1.73
44
D DROP (in) (mm)
1.69
43
A
SAE 45° Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
061-8863
0.313
7.9
-6
053-1788
0.625
15.9
-12
A THREAD SIZE 5/8
- 18
1 1/16 - 14
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
-6
2.01
51
1.10
28
-12
2.91
74
1.46
37
SAE 45° Female Swivel - 45° Elbow B C
PART NUMBER
D
9X-3879 A
156
HOSE I.D. (in) (mm)
0.313
7.9
HOSE DASH SIZE
-6
A THREAD SIZE 5/8
- 18
A THREAD DASH SIZE
-6
B LENGTH (in) (mm)
2.24
57
C CUT-OFF FACTOR (in) (mm)
1.38
35
D DROP (in) (mm)
0.39
10
Reusable Couplings (556, 1130) SAE 45° Female Swivel - 90° Elbow B C
PART NUMBER D
9X-3880
HOSE I.D. (in) (mm)
0.313
HOSE DASH SIZE
7.9
A THREAD SIZE 5/8
-6
A THREAD DASH SIZE
- 18
-6
B LENGTH (in) (mm)
2.20
56
C CUT-OFF FACTOR (in) (mm)
1.38
35
D DROP (in) (mm)
0.87
22
A
SAE Code 61 Flange B C PART NUMBER
A
HOSE I.D. (in) (mm)
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
0.625
15.9
-12
1.50
38.1
-12
3.19
81
1.61
41 4J-5267
9X-3841
0.875
22.2
-16
1.75
44.5
-16
2.76
70
1.50
38 4J-0520
9X-3842
1.125
28.6
-20
2.00
50.8
-20
3.58
91
2.20
56 4J-0522
9X-3843
1.375
34.9
-24
2.37
60.3
-24
4.02
102
2.56
65 4J-0524
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
SAE Code 61 Flange - 45° Elbow B C
D A
HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
9X-3844
0.625 15.9
-12
1.50
38.1
-12
4.02
102
2.52
64
0.98
25 4J-5267
9X-3845
0.875 22.2
-16
1.75
44.5
-16
3.74
95
2.56
65
1.06
27 4J-0520
9X-3846
1.125 28.6
-20
2.00
50.8
-20
4.09
104
2.83
72
1.14
29 4J-0522
9X-3847
1.375 34.9
-24
2.37
60.3
-24
4.37
111
2.99
76
1.14
29 4J-0524
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B C
D
A
SAE Code 61 Flange - 90° Elbow HOSE DASH SIZE
A A HEAD FLANGE SIZE DASH (in) (mm) SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
PART NUMBER
HOSE I.D. (in) (mm)
D DROP O-RING (in) (mm) SEAL
9X-3848
0.625 15.9
-12
1.50
38.1
-12
3.74
95
2.28
58
2.13
54 4J-5267
9X-3849
0.875 22.2
-16
1.75
44.5
-16
3.54
90
2.28
58
2.36
60 4J-0520
9X-3850
1.125 28.6
-20
2.00
50.8
-20
4.02
102
2.64
67
2.52
64 4J-0522
9X-3851
1.375 34.9
-24
2.37
60.3
-24
4.41
112
2.95
75
2.76
70 4J-0524
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
157
Caterpillar Special Application Hose Products
9X-3840
Reusable Couplings (556, 1130) ORFS Female Swivel B C
PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
9X-3881
0.188
4.8
-4
9/16
- 18
-4
2.13
54
1.42
36 4J-5477
7X-1463
0.313
7.9
-6
11/16
- 16
-6
2.52
64
1.65
42 6V-8397
9X-3882
0.406
10.3
-8
13/16
- 16
-8
3.07
78
2.01
51 6V-8398
9X-3883
0.500
12.7
-10
1 - 14
-10
3.31
84
2.09
53 7J-9108
9X-3884
0.625
15.9
-12
1 3/16 - 12
-12
3.74
95
2.24
57 6V-9746
9X-3885
0.875
22.2
-16
1 7/16 - 12
-16
3.39
86
2.20
56 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 45° Elbow B
Caterpillar Special Application Hose Products
C
PART NUMBER
D A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE 9/16
- 18
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
9X-3886
0.188
4.8
-4
-4
2.13
54
1.54
39
0.39
10 4J-5477
9X-3887
0.313
7.9
-6
1 1/16 - 16
-6
2.52
64
1.69
43
0.43
11 6V-8397
9X-3888
0.406
10.3
-8
13/16
-8
3.19
81
2.09
53
0.59
15 6V-8398
9X-3889
0.500
12.7
-10
1 - 14
-10
3.46
88
2.24
57
0.67
17 7J-9108
3/16
- 16
9X-3890
0.625
15.9
-12
1
- 12
-12
3.86
98
2.32
59
0.83
21 6V-9746
9X-3891
0.875
22.2
-16
1 7/16 - 12
-16
4.02
102
2.83
72
0.94
24 5K-9090
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
ORFS Female Swivel - 90° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
9X-3892
0.188
4.8
-4
9/16
- 18
-4
1.97
50
1.54
39
0.79
20 4J-5477
9X-3898
0.188
4.8
-4
9/16
- 18
-4
1.97
50
1.73
44
1.81
46 4J-5477
9X-3893
0.313
7.9
-6
11/16
- 16
-6
2.40
61
1.54
39
0.91
23 6V-8397
9X-3899
0.313
7.9
-6
11/16
- 16
-6
2.48
63
1.65
42
2.13
54 6V-8397
9X-3894
0.406
10.3
-8
13/16
- 16
-8
2.91
74
1.81
46
1.14
29 6V-8398
13/16
- 16
9X-3900
0.406
10.3
-8
-8
2.95
75
1.89
48
2.52
64 6V-8398
9X-3895
0.500
12.7
-10
1 - 14
-10
3.15
80
1.93
49
1.26
32 7J-9108
9X-3901
0.500
12.7
-10
1 - 14
-10
3.27
83
2.05
52
2.76
70 7J-9108
9X-3896
0.625
15.9
-12
1 3/16 - 12
-12
3.74
95
2.24
57
1.89
48 6V-9746
9X-3902
0.625
15.9
-12
1 3/16 - 12
-12
3.78
96
2.28
58
3.78
96 6V-9746
9X-3897
0.875
22.2
-16
1 7/16 - 12
-16
3.98
101
2.76
70
2.20
56 5K-9090
9X-3903
0.875
22.2
-16
1 7/16 - 12
-16
3.54
90
2.36
60
4.49
114 5K-9090
NOTE: Refer to the Seal Section of the Guide for a complete list of seals and applications.
158
D DROP O-RING (in) (mm) SEAL
Air Conditioning Hose (1543J) and Couplings Air Conditioning Hose (1543J)........................................................................................... 160 Permanent Couplings (1543J)........................................................................................... 161 Male Inverted O-Ring Swivel.......................................................................................... 161 Tube O-Ring Female Swivel........................................................................................... 161 Metric Tube O-Ring Female Swivel................................................................................ 163 Double Collet.................................................................................................................. 163 ORFS..............................................................................................................................163 Adapter to Self Sealing Fitting........................................................................................ 163 Service Valve Fitting....................................................................................................... 165 Male Bulkhead O-Ring Connector.................................................................................. 165 SAE 45°.......................................................................................................................... 166
Caterpillar Special Application Hose Products
159
Air Conditioning Hose (1543J) Air Conditioning Hose (1543J) CATERPILLAR ® 1543
Exceeds the requirement of SAE J51 Type D and meets requirements of SAE J2064 Type D. Note: Sold by the inch. HOSE I.D.
(mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
15.7
2000
13,790
500
3448
2.48
63
18.8
2000
13,790
500
3448
2.01
51
0.83
21.1
2000
13,790
500
3448
2.99
76
-10
0.96
24.4
2000
13,790
500
3448
3.86
98
-12
1.12
28.4
1600
11,032
400
2758
4.49
114
(mm)
HOSE DASH SIZE
(in)
7.9
-5
0.62
0.406
10.3
-6
0.74
214-5193
0.500
12.7
-8
9X-2390
0.625
15.9
166-9260
0.750
19.1
PART NUMBER
(in)
9X-2388
0.313
9X-2389
HOSE O.D.
MIN. BEND RADIUS 1 (in) (mm)
Construction: Thermoplastic tube, textile braid, elastomeric cover. Application: Construction, truck and agricultural air conditioning systems. Moisture Ingression: Less than 16 gm/100 in² per year. R134 Permeation: 2.0 lbs/ft² per year at 176° F. Temperature Range: -22° F to +257° F (-30° C to +125° C). Couplings: Crimp-on permanent, non-skive type, see Permanent Couplings (1543) section. For related assembly equipment and tooling, see Tooling section. Required Cutting Tool: Cutting Tool (177-4271) and Blade (177-4272) is required for cutting hose. Do not use Hose Cutting Machine. Cut-off saw can cause heating distortion. See Miscellaneous Tools and Accessories section. Reference: IRM HOS02-01
Caterpillar Special Application Hose Products
1 Centerline of Hose
160
Permanent Couplings (1543J) Male Inverted O-Ring Swivel B C PART NUMBER
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
7X-1818
0.313
7.9
-5
5/8
- 18
-6
3.23
82
1.54
39 9X-7380
7X-1819
0.406
10.3
-6
3/4
- 18
-8
3.46
88
1.77
45 9X-7381
7X-1820
0.625
15.9
-10
7/8
- 18
-10
3.62
92
1.97
50 9X-7382
1/16
9X-4006
0.625
15.9
-10
1
- 16
-12
3.78
96
2.13
54 9X-7383
166-9264
0.750
19.1
-12
1 1/16 - 16
-12
4.02
102
2.50
64 9X-7383
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Male Inverted O-Ring Swivel - 45° Elbow B C
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
7X-1824
0.313
7.9
-5
5/8
- 18
-6
3.43
87
1.77
45
1.02
26 9X-7380
7X-1825
0.406
10.3
-6
3/4
- 18
-8
3.78
96
2.09
53
1.26
32 9X-7381
7X-1826
0.625
15.9
-10
7/8
- 18
-10
3.98
101
2.32
59
1.30
33 9X-7382
125-0998
0.625
15.9
-10
-12
5.75
146
4.16
106
2.77
70 9X-7383
1 1/16 - 16
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
B
Male Inverted O-Ring Swivel - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
7X-1821
0.313
7.9
-5
5/8
- 18
-6
2.72
69
1.02
26
1.69
43 9X-7380
7X-1822
0.406
10.3
-6
3/4
- 18
-8
2.95
75
1.26
32
2.24
57 9X-7381
7X-1823
0.625
15.9
-10
7/8
- 18
-10
3.23
82
1.50
38
2.24
57 9X-7382
9X-4000
0.625
15.9
-10
1 1/16 - 16
-12
3.82
97
2.24
57
2.52
64 9X-7383
166-9265
0.750
19.1
-12
1 1/16 - 16
-12
4.02
102
2.50
64
2.50
64 9X-7383
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Tube O-Ring Female Swivel B C
A
PART NUMBER
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
7X-1800
0.313
7.9
-5
5/8
- 18
-6
3.15
80
1.38
35 9X-7380
9X-4011
0.313
7.9
-5
3/4
- 16
-8
3.35
85
1.65
42 9X-7381
7X-1801
0.406
10.3
-6
3/4
- 16
-8
3.35
85
1.65
42 9X-7381
215-2088
0.500
12.7
-8
7/8
- 14
-10
3.23
82
1.61
41 9X-7382
7X-1802
0.625
15.9
-10
7/8
- 14
-10
3.54
90
1.81
46 9X-7382
206-0917
0.625
15.9
-10
-12
3.54
90
1.93
49 9X-7383
166-9267
0.750
19.1
-12
-10
3.54
90
2.01
51 9X-7382
166-9266
0.750
19.1
-12
-12
3.54
90
2.01
51 9X-7383
1 1/16 - 14 7/8
- 14
1 1/16 - 14
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
161
Caterpillar Special Application Hose Products
PART NUMBER
Permanent Couplings (1543J) Tube O-Ring Female Swivel - 45° Elbow B C
PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
214-7290
0.313
7.9
-5
5/8
- 18
-6
3.70
94
2.09
53
0.55
14 9x-7380
7X-1809
0.313
7.9
-5
5/8
- 18
-6
3.78
96
2.09
53
0.71
18 9X-7380
214-7296
0.313
7.9
-5
3/4
- 16
-8
2.87
73
1.26
32
0.60
15 9X-7381
167-0678
0.313
7.9
-5
3/4
- 16
-8
3.94
100
2.29
58
1.14
29 9X-7381
7X-1810
0.406
10.3
-6
3/4
- 16
-8
3.58
91
1.89
48
0.87
22 9X-7381
7X-18881
0.406
10.3
-6
3/4
- 16
-8
4.21
107
2.56
65
1.30
33 9X-7381
7X-1811
0.625
15.9
-10
7/8
- 14
-10
3.78
96
2.09
53
1.08
28 9X-7382
119-6228
0.625
15.9
-10
-12
4.17
106
2.48
63
1.42
36 9X-7383
169-4877
0.750
19.1
-12
-10
4.13
105
2.61
66
1.59
40 9X-7382
166-9268
0.750
19.1
-12
-12
4.13
105
2.61
66
1.59
40 9X-7383
1 1/16 - 14 7/8
- 14
1 1/16 - 14
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Caterpillar Special Application Hose Products
1 Has Schrader Valve (with 3/8 - 24 thread size) for checking system pressure.
B C
Tube O-Ring Female Swivel - 90° Elbow PART NUMBER
D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
214-7304
0.313
7.9
-5
5/8
- 18
-6
3.74
95
2.12
54
1.12
28 9X-7380
7X-1803
0.313
7.9
-5
5/8
- 18
-6
2.72
69
0.83
21
1.18
30 9X-7380
7X-1804
0.313
7.9
-5
5/8
- 18
-6
2.72
69
1.06
27
1.73
44 9X-7380
214-7297
0.313
7.9
-5
3/4
- 16
-8
3.11
79
1.51
38
1.38
35 9X-7381
7X-1805
0.313
7.9
-5
3/4
- 16
-8
3.19
81
1.50
38
1.61
41 9X-7381
6V-35041
0.406
10.3
-6
3/4
- 16
-8
4.06
103
2.44
62
1.50
38 9X-7381
7X-1806
0.406
10.3
-6
3/4
- 16
-8
2.91
74
1.22
31
1.50
38 9X-7381
133-8724
0.406
10.3
-6
3/4
- 16
-8
2.91
74
1.22
31
3.35
85 9X-7381
214-7277
0.500
12.7
-8
7/8
- 14
-10
3.74
95
1.50
38
1.50
38 9X-7382
7X-1807
0.625
15.9
-10
7/8
- 14
-10
3.27
83
1.61
41
1.69
43 9X-7382
3E-4088
0.625
15.9
-10
7/8
- 14
-10
3.27
83
1.65
42
2.20
56 9X-7383
133-8726
0.625
15.9
-10
7/8
- 14
-10
3.27
83
1.61
41
4.41
112 9X-7382
7X-1808
0.625
15.9
-10
7/8
- 14
-10
3.31
84
1.65
42
5.91
150 9X-7382
214-7289
0.625
15.9
-10
1 1/16 - 14
-12
4.61
117
3.00
76
1.79
46 9X-3783
3E-6815
0.625
15.9
-10
1 1/16 - 14
-12
3.31
84
1.50
38
2.01
51 9X-7383
169-4878
0.750
19.1
-12
-10
3.27
83
1.75
44
2.98
76 9X-7382
166-9261
0.750
19.1
-12
-12
4.02
102
2.50
64
2.50
64 9X-7383
7/8
- 14
1 1/16 - 14
NOTE: Refer to the Seal Section of this Gudie for a complete list of seals and applications. 1 Has Schrader Valve (with 7/16 - 20 thread size) for checking system pressure.
162
D DROP O-RING (in) (mm) SEAL
Permanent Couplings (1543J) Metric Tube O-Ring Female Swivel - 45° Elbow B C
PART NUMBER D
193-0683
HOSE I.D. (in) (mm)
0.313
7.9
HOSE DASH SIZE
A THREAD SIZE
-5
M16 - 1.5
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
4.25
108
2.64
67
D DROP O-RING (in) (mm) SEAL
0.79
20 192-7514
A
B C
Metric Tube O-Ring Female Swivel - 90° Elbow PART NUMBER
D
B C
A THREAD SIZE
C CUT-OFF FACTOR (in) (mm)
B LENGTH (in) (mm)
D DROP O-RING (in) (mm) SEAL
193-0681
0.313
7.9
-5
M16 - 1.5
2.99
76
1.57
40
1.57
198-5307
0.406 10.3
-8
M22 - 1.5
3.19
81
1.57
40
1.57
40 123-2342
193-0679
0.406 10.3
-6
M22 - 1.5
3.19
81
1.57
40
4.02
102 123-2342
193-0678
0.625 15.9
-10
M24 - 1.5
3.39
86
1.77
45
1.77
45 192-7515
40 192-7514
Double Collet - 90° Elbow PART NUMBER
D
HOSE DASH SIZE
HOSE I.D. (in) (mm)
HOSE DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
124-7338
0.313
7.9
-5
3.07
78
1.50
38
1.50
38
124-7337
0.625
15.9
-10
4.80
122
3.23
82
3.23
82
ORFS Female Swivel B C
THREAD A
PART NUMBER
199-6625
HOSE I.D. (in) (mm)
0.406
10.3
HOSE DASH SIZE
-6
A THREAD SIZE 3/4
- 16
A THREAD DASH SIZE
-8
B LENGTH (in) (mm)
3.15
80
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
1.77
45 9X-7381
HEX 1
HEX 2
Adapter to Self Sealing Fitting B C
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
7X-1815
0.313
7.9
-5
7/8
- 20
3.31
84
1.57
40 9X-7383
7X-1816
0.406
10.3
-6
7/8
- 20
3.43
87
1.77
45 9X-7383
215-2090
0.500
12.7
-8
7/8
- 14
3.54
90
1.95
50 9X-7382
214-7286
0.500
12.7
-8
1 1/4 - 18
3.82
97
2.20
56 9X-7384
7X-1817
0.625
15.9
-10
1 1/4 - 18
4.09
104
2.44
62 9X-7384
163
Caterpillar Special Application Hose Products
A
HOSE I.D. (in) (mm)
Permanent Couplings (1543J) Adapter to Self Sealing Fitting (continued) B C
PART NUMBER
166-9262
A
HOSE I.D. (in) (mm)
0.750
19.1
HOSE DASH SIZE
A THREAD SIZE
-12
1 1/4 - 18
C CUT-OFF FACTOR O-RING (in) (mm) SEAL
B LENGTH (in) (mm)
4.02
102
2.50
64 9X-7384
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
Adapter to Self Sealing Fitting - 45° Elbow B C
PART NUMBER
Caterpillar Special Application Hose Products
D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
142-2616
0.406 10.3
-6
9X-4012
0.625 15.9
-10
A THREAD SIZE 7/8
- 20
1 1/4 - 18
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
4.41
112
2.80
71
1.26
32 9X-7383
4.13
105
2.44
62
1.42
36 9X-7384
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
A
Adapter to Self Sealing Fitting - 60° Elbow B C
PART NUMBER
214-7293
D
HOSE I.D. (in) (mm)
0.625 15.9
HOSE DASH SIZE
A THREAD SIZE
-10
1 1/4 - 18
B LENGTH (in) (mm)
5.94
151
C CUT-OFF FACTOR (in) (mm)
4.35
110
D DROP O-RING (in) (mm) SEAL
2.05
52 9X-7384
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
B
Adapter to Self Sealing Fitting - 90° Elbow
C
PART NUMBER D
A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
214-7288
0.313
7.9
-5
7/8
- 20
2.95
75
1.35
34
1.37
35 9X-7383
7X-1812
0.313
7.9
-5
7/8
- 20
2.72
69
1.06
27
1.50
38 9X-7383
3E-4038
0.313
7.9
-5
7/8
- 20
2.72
69
1.06
27
2.56
65 9X-7383
7X-1813
0.406 10.3
-6
7/8
- 20
3.15
80
1.54
39
1.77
45 9X-7383
3.98
101
2.37
60
2.44
62 9X-7384
3.90
99
2.29
58
2.44
62 9X-7383
1
1/4
214-7287
0.500 12.7
-8
214-7302
0.500 12.7
-8
7X-1814
0.625 15.9
-10
1 1/4 - 18
3.31
84
1.65
42
2.99
76 9X-7384
124-2340
0.625 15.9
-10
1 1/4 - 18
3.31
84
1.65
42
3.94
100 9X-7384
166-9263
0.750 19.1
-12
1 1/4 - 18
4.02
102
2.50
64
3.00
76 9X-7384
7/8
- 18
- 20
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
164
D DROP O-RING (in) (mm) SEAL
Permanent Couplings (1543J) B
Adapter to Self Sealing Fitting - 135° Elbow
C
PART NUMBER
D
9X-4010
HOSE I.D. (in) (mm)
0.625
15.9
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-10
1 1/4 - 18
-12
B LENGTH (in) (mm)
3.86
98
C CUT-OFF FACTOR (in) (mm)
0.75
D DROP (in) (mm)
19
2.50
64
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications.
A
B
Adapter to Self Sealing Fitting - 90° Elbow - Block
C
PART NUMBER D
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
0.625 15.9
-10
1 1/4 - 18
3.31
84
1.65
42
1.16
30 9X-7384
196-5861
0.750 19.1
-12
1 1/4 - 18
4.41
112
2.86
73
1.16
30 9X-7384
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. A
B C
Service Valve Fitting - 90° Elbow PART NUMBER
7X-1889
D
7X-1887
HOSE I.D. (in) (mm)
0.313 0.313
7.9 7.9
HOSE DASH SIZE
THREAD SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP (in) (mm)
-5
3/8
- 24
2.83
72
1.18
30
2.36
60
-5
7/16
- 20
2.83
72
1.18
30
2.36
60
NOTE: All listed part numbers have Schrader Valve for checking system pressure. A
Male O-Ring Connector B C
PART NUMBER A
HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
125-2797
0.313
7.9
-5
5/8
- 18
-6
3.15
80
1.54
39
141-0893
0.313
7.9
-5
3/4
- 16
-8
4.09
104
2.48
63
9X-4208
0.625
15.9
-10
7/8
- 14
-10
3.62
92
1.97
50
165
Caterpillar Special Application Hose Products
139-1485
Permanent Couplings (1543J) B
Male O-Ring Bulkhead Connector - 90° Elbow
C
PART NUMBER D
3E-6814
HOSE I.D. (in) (mm)
0.625
15.9
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
-10
1 1/16 - 14
-12
B LENGTH (in) (mm)
4.13
105
C CUT-OFF FACTOR (in) (mm)
2.24
57
D DROP O-RING (in) (mm) SEAL
2.91
74 9X-7383
NOTE: Refer to the Seal Section of this Guide for a complete list of seals and applications. Thread A
SAE 45° Female Swivel - 45° Elbow B C
PART NUMBER
Caterpillar Special Application Hose Products
D A
B C
A
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
0.406
10.3
-6
3/4
- 16
-8
3.82
97
2.23
57
0.55
14 9X-7381
214-7283
0.406
10.3
-6
7/8
- 14
-10
3.62
92
2.01
51
0.65
17 9X-7382
SAE 45° Female Swivel - 90° Elbow HOSE I.D. (in) (mm)
HOSE DASH SIZE
A THREAD SIZE
A THREAD DASH SIZE
B LENGTH (in) (mm)
C CUT-OFF FACTOR (in) (mm)
D DROP O-RING (in) (mm) SEAL
214-7276
0.313
7.9
-5
5/8
- 18
-6
2.87
73
1.25
32
1.12
28 9X-7380
214-7281
0.313
7.9
-5
5/8
- 18
-6
2.95
75
1.35
34
2.03
52 9X-3780
215-2086
0.406
10.3
-6
3/4
- 16
-8
3.11
79
1.48
38
1.34
34 9X-7381
-8
7/8
- 14
-10
3.70
94
2.10
53
1.61
41 9X-7381
214-7275
166
HOSE DASH SIZE
214-7278
PART NUMBER
D
HOSE I.D. (in) (mm)
0.500
12.7
Specialty Hose Heater Hose - Standard (515A)......................................................................................... 168 Heater Hose - High Temperature (1543N)......................................................................... 168 Radiator Hose (642)........................................................................................................... 168 Hydraulic Return Hose (661).............................................................................................. 168 Air Brake Hose (662)..........................................................................................................169
Caterpillar Special Application Hose Products
167
Specialty Hose CATERPILLAR ® Heater Hose
Heater Hose - Standard (515A) Meets the requirements of SAE J20R3. Note: Sold by the centimeter.
CATERPILLAR ® Heater Hose
PART NUMBER
(in)
(mm)
HOSE DASH SIZE
(in)
(mm)
MIN. BURST PRESS. (psi) (kPa)
5P-0767
0.625
15.9
-10
0.94
23.9
254
1750
63
437
5P-0765
0.750
19.0
-12
1.06
26.9
203
1400
51
350
8I-1362
1.000
25.4
-16
1.33
33.8
174
1200
44
300
HOSE I.D.
HOSE O.D.
MAX. WORK. PRESS. (psi) (kPa)
Heater Hose - High Temperature (1543N)
Caterpillar Special Application Hose Products
Meets the requirements of SAE 20R3 Silicone. Note: Sold by the centimeter.
CATERPILLAR ® Radiator Hose
(mm)
HOSE DASH SIZE
(in)
(mm)
MIN. BURST PRESS. (psi) (kPa)
15.9
-12
0.90
22.8
254
1750
64
441
19.1
-14
1.06
27.0
203
1400
51
350
HOSE I.D.
PART NUMBER
(in)
6V-8843
0.625
8T-9543
0.750
HOSE O.D.
MAX. WORK. PRESS. (psi) (kPa)
Radiator Hose (642) Meets the requirements of SAE J20R1. Note: Sold by the centimeter.
168
(mm)
MIN. BURST PRESS. (psi) (kPa)
MAX. WORK. PRESS. (psi) (kPa)
39.6
567
3910
142
980
42.8
548
3780
137
945
1.81
46.0
508
3500
127
875
-21
1.87
47.5
508
3500
127
875
34.9
-22
1.93
49.1
487
3360
122
840
1.500
38.1
-24
2.06
52.3
457
3150
114
784
5P-1256
1.625
41.3
-26
2.19
55.5
406
2800
102
700
5P-1257
1.750
44.5
-28
2.31
58.7
406
2800
102
700
5P-1258
1.875
47.6
-30
2.43
61.8
365
2520
91
630
5P-1259
2.000
50.8
-32
2.56
65.0
355
2450
89
616
5P-1260
2.250
57.2
-36
2.81
71.4
355
2450
89
616
5P-1261
2.375
60.3
-38
2.93
74.5
325
2240
81
560
5P-1262
2.500
63.5
-40
3.06
77.7
305
2100
76
525
5P-1263
2.750
69.9
-44
3.31
84.1
244
1680
61
420
5P-1264
2.875
73.0
-46
3.43
87.2
244
1680
61
420
5P-1265
3.000
76.2
-48
3.56
90.4
244
1680
61
420
5P-1266
3.250
82.6
-52
3.81
96.8
203
1400
51
350
5P-0764
3.500
88.9
-56
4.06
103.1
203
1400
51
350
5P-1267
3.750
95.3
-60
4.31
109.5
162
1120
41
280
5P-1268
4.000
101.6
-64
4.56
115.8
152
1050
39
266
7X-7895
4.250
108.0
-68
4.81
122.2
122
840
30
210
5P-1269
4.500
114.3
-72
5.06
128.5
122
840
30
210
5P-1270
5.000
127.0
-80
5.56
141.2
102
700
25
175
HOSE I.D. (mm)
HOSE DASH SIZE
(in)
25.4
-16
1.56
1.125
28.6
-18
1.69
5P-1253
1.250
31.8
-20
5P-1254
1.313
33.3
5P-1255
1.375
5P-0763
PART NUMBER
(in)
5P-1251
1.000
5P-1252
HOSE O.D.
Specialty Hose CATERPILLAR ® Hydraulic Return Hose
Hydraulic Return Hose (661) Note: Sold by the centimeter. PART NUMBER
(in)
(mm)
HOSE DASH SIZE
(in)
(mm)
MIN. BURST PRESS. (psi) (kPa)
5P-2094
1.000
25.4
-16
1.62
41.1
841
5800
210
1450
8C-7304
1.125
28.6
-18
1.74
44.2
841
5800
210
1450
5P-6412
1.250
31.8
-20
1.88
47.7
841
5800
210
1450
5P-1291
1.500
38.1
-24
2.12
53.8
841
5800
210
1450
5P-1292
1.750
44.5
-28
2.38
60.4
783
5400
196
1350
5P-1293
2.000
50.8
-32
2.56
65.0
783
5400
196
1350
5P-1294
2.250
57.2
-36
2.87
72.9
609
4200
152
1050
5P-1295
2.500
63.5
-40
3.12
79.2
609
4200
152
1050
7X-7893
3.000
76.2
-48
3.62
91.9
609
4200
152
1050
7X-7894
3.250
82.6
-52
3.88
98.5
609
4200
152
1050
5P-1296
3.500
88.9
-56
4.12
104.6
609
4200
152
1050
8T-2917
4.000
101.6
-64
4.70
119.4
406
2800
102
700
HOSE I.D.
HOSE O.D.
MAX. WORK. PRESS. (psi) (kPa)
CATERPILLAR ® Air Brake Hose
Air Brake Hose (662) Meets the requirements of SAE J1402. Note: Sold by the centimeter. PART NUMBER
(in)
(mm)
HOSE DASH SIZE
(in)
(mm)
MIN. BURST PRESS. (psi) (kPa)
5P-0720
0.250
6.4
-4
0.63
15.9
914
6300
203
1400
5P-0721
0.375
9.5
-6
0.75
19.1
914
6300
203
1400
5P-1300
0.438
11.1
-7
0.81
20.6
914
6300
203
1400
5P-0722
0.500
12.7
-8
0.81
20.6
914
6300
203
1400
HOSE I.D.
HOSE O.D.
MAX. WORK. PRESS. (psi) (kPa)
APPLICATION: Air only. Approved for use on vehicles by meeting D.O.T. FMVSS 106.
169
Caterpillar Special Application Hose Products
APPLICATION: Low temperature, straight connections where band clamps are required.
Caterpillar Special Application Hose Products
Specialty Hose
170
Adapters NPTF Adapters.................................................................................................................. 172 JIC Adapters...................................................................................................................... 182 ORFS Adapters.................................................................................................................. 204 Metric Adapters.................................................................................................................. 231 NPSM Adapters................................................................................................................. 242 Miscellaneous Adapters..................................................................................................... 248 Swivel and Bulkhead Nuts................................................................................................. 254
Adapters
171
NPTF Adapters NPTF Male / NPTF Male L
A
B
PART NUMBER
A NPTF THREAD DASH SIZE
0A-2926
-2
1/8
- 27
-2
1/8
- 27
0.98
25
6K-6967
-2
1/8
- 27
-2
1/8
- 27
1.02
26
5K-5068
-2
1/8
- 27
-2
1/8
- 27
1.06
27
8C-7575
-2
1/8
- 27
-2
1/8
- 27
1.50
38
8C-7576
-2
1/8
- 27
-2
1/8
- 27
2.99
76
6K-1019
-2
1/8
- 27
-4
1/4
- 18
1.18
30
5P-3238
-4
1/4
- 27
-2
1/8
- 27
1.26
32
8S-7169
-4
1/4
- 18
-4
1/4
- 18
1.14
29
5P-8998
-4
1/4
- 18
-4
1/4
- 18
1.46
37
8C-7574
-4
1/4
- 18
-4
1/4
- 18
5.98
152
5S-2403
-4
1/4
- 18
-6
3/8
- 18
1.46
37
114-3399
-4
1/4
- 18
-8
1/2
- 14
1.69
43
8X-3316
-4
1/4
- 18
-12
3/4
- 14
2.05
52
004-6683
-6
3/8
- 18
-6
3/8
- 18
1.46
37
4K-5629
-8
1/2
- 14
-8
1/2
- 14
1.81
46
002-6454
-8
1/2
- 14
-8
1/2
- 14
1.89
48
8C-6905
-8
1/2
- 14
-12
3/4
- 14
1.89
48
004-7270
-12
3/4
- 14
-12
3/4
- 14
1.97
50
005-8615
-16
1 - 11 1/2
-16
1 - 11 1/2
2.32
59
1P-5598
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
2.48
63
109-5605
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.60
66
2.72
69
3E-2315
-24
A NPTF THREAD SIZE (in - TPI)
1
1/2
- 11
1/2
B NPTF THREAD DASH SIZE
-32
B NPTF THREAD SIZE (in - TPI)
2 - 11
1/2
L LENGTH (in) (mm)
NPTF Male / NPTF Female L
PART NUMBER
A NPTF THREAD DASH SIZE
002-0639
-2
1/8
- 27
-2
1/8
- 27
0.87
22
6K-6967
-2
1/8
- 27
-2
1/8
- 27
1.02
26
4M-5317
-4
1/4
- 18
-2
1/8
- 27
0.87
22
2R-1576
-4
1/4
- 18
-4
1/4
- 18
0.98
25
3P-1823
-4
1/4
- 18
-4
1/4
- 18
1.38
35
8B-6021
-4
1/4
- 18
-6
3/8
- 18
1.06
27
030-8370
-4
1/4
- 18
-6
3/8
- 18
1.46
37
162-6207
-4
1/4
- 18
-6
3/8
- 18
2.13
54
3B-7721
-6
3/8
- 18
-2
1/8
- 27
0.71
18
3B-7722
-6
3/8
- 18
-4
1/4
- 18
0.87
22
5K-6875
-6
3/8
- 18
-6
3/8
- 18
1.26
32
032-3506
-6
3/8
- 18
-8
1/2
- 14
1.69
43
030-7139
-6
3/8
- 18
-12
3/4
- 14
1.73
44
8B-1931
-8
1/2
- 14
-2
1/8
- 27
1.10
28
6B-5072
-8
1/2
- 14
-4
1/4
- 18
1.10
28
3B-7255
-8
1/2
- 14
-6
3/8
- 18
1.10
28
6L-5652
-8
1/2
- 14
-8
1/2
- 14
1.73
44
B
Adapters
A
172
A NPTF THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
NPTF Adapters NPTF Male / NPTF Female (continued) L
PART NUMBER
A NPTF THREAD DASH SIZE
7D-4903
-8
1/2
- 14
-8
1/2
- 14
1.89
48
007-0950
-8
1/2
- 14
-12
3/4
- 14
1.93
49
7B-2176
-12
3/4
- 14
-2
1/8
- 27
0.91
23
9B-3523
-12
3/4
- 14
-4
1/4
- 18
1.18
30
011-5224
-12
3/4
- 14
-6
3/8
- 18
0.83
21
8B-2664
-12
3/4
- 14
-8
1/2
- 14
1.18
30
004-5703
-12
3/4
- 14
-16
2.17
55
6B-1628
-16
1 - 11 1/2
-6
3/8
- 18
1.38
35
061-9593
-16
1 - 11 1/2
-8
1/2
- 14
0.98
25
6B-9081
-16
1 - 11 1/2
-12
3/4
- 14
1.34
34
8F-8306
-20
1 1/4 - 11 1/2
-12
3/4
- 14
1.14
29
6B-7280
-24
1 1/2 - 11 1/2
-4
1/4
- 18
1.14
29
6F-7732
-24
1 1/2 - 11 1/2
-12
3/4
- 14
1.30
33
2.68
68
B
A
9D-9658
L-2 L-1
2 - 11
1/2
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
-32
2 - 11
1/2
L LENGTH (in) (mm)
NPTF Male / NPTF Female - 45° Elbow
B
A
-32
A NPTF THREAD SIZE (in - TPI)
PART NUMBER
A NPTF THREAD DASH SIZE
3B-7896
-2
1/8
- 27
-2
1/8
- 27
0.71
18
0.43
11
7D-2746
-2
1/8
- 27
-2
1/8
- 27
0.51
13
0.39
10
8L-5008
-2
1/8
- 27
-2
1/8
- 27
0.71
18
0.47
12
5H-8936
-2
1/8
- 27
-4
1/4
- 18
1.06
27
1.06
27
3B-6772
-4
1/4
- 18
-4
1/4
- 18
0.87
22
0.55
14
2N-1931
-4
1/4
- 18
-4
1/4
- 18
1.06
27
0.63
16
6V-7535
-4
1/4
- 18
-4
1/4
- 18
0.71
18
0.55
14
5E-3952
-6
3/8
- 18
-6
3/8
- 18
2.99
76
2.20
56
1L-2279
-6
3/8
- 18
-6
3/8
- 18
1.06
27
0.71
18
000-7244
-8
1/2
- 14
-8
1/2
- 14
1.34
34
0.91
23
3B-7731
-8
1/2
- 14
-8
1/2
- 14
1.18
30
0.83
21
5B-1585
-8
1/2
- 14
-8
1/2
- 14
1.06
27
0.79
20
000-7246
-12
3/4
- 14
-12
3/4
- 14
1.38
35
0.94
24
156-0142
-12
3/4
- 14
-12
3/4
- 14
0.98
25
1.38
35
3B-7732
-12
3/4
- 14
-12
3/4
- 14
1.30
33
0.94
24
002-5743
-16
1 - 11 1/2
-16
1 - 11 1/2
1.73
44
1.10
28
3D-2187
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.81
46
1.30
33
2N-3543
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.65
42
1.22
31
2.99
76
2.20
56
-48
3/8
- 18
B NPTF THREAD DASH SIZE
-48
B NPTF THREAD SIZE (in - TPI)
3/8
- 18
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
173
Adapters
5E-3952
A NPTF THREAD SIZE (in - TPI)
NPTF Adapters
Adapters
NPTF Male / NPTF Female - 90° Elbow
174
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
3B-8822
-2
1/8
- 27
-2
1/8
- 27
0.87
22
0.55
14
3H-0120
-2
1/8
- 27
-2
1/8
- 27
0.55
14
0.24
6
4M-8973
-2
1/8
- 27
-2
1/8
- 27
1.18
30
0.31
8
2D-1683
-2
1/8
- 27
-2
1/8
- 27
0.75
19
0.24
6
3B-6552
-2
1/8
- 27
-2
1/8
- 27
0.67
17
0.79
20
6V-3342
-2
1/8
- 27
-4
1/4
- 18
0.71
18
0.55
14
6V-4245
-4
1/4
- 18
-2
1/8
- 27
1.10
28
0.67
17
004-7617
-4
1/4
- 18
-4
1/4
- 18
1.10
28
0.87
22
3S-8743
-4
1/4
- 18
-4
1/4
- 18
0.98
25
0.71
18
7J-8611
-4
1/4
- 18
-4
1/4
- 18
1.10
28
0.87
22
3B-6773
-4
1/4
- 18
-4
1/4
- 18
1.10
28
0.71
18
3B-6553
-4
1/4
- 18
-4
1/4
- 18
1.18
30
0.83
21
3D-8884
-4
1/4
- 18
-4
1/4
- 18
1.06
27
0.43
11
2T-2169
-4
1/4
- 18
-6
3/8
- 18
1.14
29
1.02
26
9M-5501
-6
3/8
- 18
-6
3/8
- 18
0.98
25
0.79
20
4B-6067
-6
3/8
- 18
-6
3/8
- 18
1.46
37
0.94
24
5L-8722
-6
3/8
- 18
-6
3/8
- 18
1.26
32
0.83
21
120-7391
-6
3/8
- 18
-6
3/8
- 18
1.22
31
1.02
26
003-2143
-6
3/8
- 18
-6
3/8
- 18
1.22
31
0.83
21
7J-0482
-6
3/8
- 18
-6
3/8
- 18
1.06
27
0.43
11
004-4659
-8
3/8
- 18
-6
1/2
- 14
1.38
35
1.18
30
030-8324
-8
1/2
- 14
-6
3/8
- 18
1.50
38
1.26
32
8T-6756
-8
1/2
- 14
-8
1/2
- 14
1.46
37
1.22
31
9L-3560
-8
1/2
- 14
-8
1/2
- 14
1.26
32
1.02
26
3B-7259
-8
1/2
- 14
-8
1/2
- 14
1.61
41
1.14
29
002-6453
-8
1/2
- 14
-8
1/2
- 14
1.46
37
1.22
31
164-0228
-8
1/2
- 14
-12
3/4
- 14
1.57
40
1.38
35
031-9746
-12
3/4
- 14
-8
1/2
- 14
1.61
41
1.38
35
003-9163
-12
3/4
- 14
-12
3/4
- 14
1.57
40
1.38
35
3L-7024
-12
3/4
-16
1 - 11
1/2
1.50
38
1.89
48
006-5707
-16
1 - 11 1/2
-16
1 - 11 1/2
1.97
50
1.61
41
3B-6555
-16
1 - 11 1/2
-16
1 - 11 1/2
2.13
54
1.46
37
1W-6919
-16
1 - 11 1/2
-16
1 - 11 1/2
1.97
50
1.38
35
8B-2777
-16
1 - 11 1/2
-20
1 1/4 - 11 1/2
0.00
0
1.73
44
6V-1881
-16
1 - 11 1/2
-20
1 1/4 - 11 1/2
1.97
50
1.69
43
6B-6765
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
2.24
57
1.69
43
3B-6556
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
2.52
64
1.73
44
1/2
1/4
- 14
- 11
1/2
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
1/4
- 11
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
005-7541
-20
1
-20
1
2.40
61
1.69
43
5B-7666
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.68
68
1.93
49
7B-8057
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.44
62
1.85
47
7B-7138
-32
2 - 11 1/2
-32
2 - 11 1/2
3.27
83
2.24
57
9F-2535
-40
2 1/2 - 8
-40
2 1/2 - 8
3.82
97
2.68
68
NPTF Adapters NPTF Male / JIC 37° Female Swivel
PART NUMBER
A NPTF THREAD DASH SIZE
6U-0464
-6
A NPTF THREAD SIZE (in - TPI) 3/8
B JIC THREAD DASH SIZE
- 18
B JIC THREAD SIZE (in - TPI) 3/4
-8
- 16
L LENGTH (in) (mm)
1.85
47
NPTF Female / SAE Code 61 Flange
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
1P-5568
-12
38.1
-12
2.48
63
1P-5570
-16
1 - 11 1/2
44.5
-16
2.68
68
1P-5575
-20
1 1/4 - 11 1/2
50.8
-20
2.83
72
3/4
- 14
B SAE HEAD SIZE (mm)
B SAE FLANGE DASH SIZE
L LENGTH (in) (mm)
NPTF Male / NPTF Female (Trapezoidal) L
PART NUMBER
A NPTF THREAD DASH SIZE
102-6496
-2
B
A NPTF THREAD SIZE (in - TPI) 1/8
- 27
B NPTF THREAD DASH SIZE
-2
B NPTF THREAD SIZE (in - TPI) 1/8
- 27
L LENGTH (in) (mm)
1.14
29
A
NPTF Female / NPTF Female
PART NUMBER
A NPTF THREAD DASH SIZE
6V-1390
-2
1/8
- 27
-6
3/8
- 18
1.02
26
3F-2779
-4
1/4
- 18
-4
1/4
- 18
0.98
25
8S-7169
-4
1/4
- 18
-4
1/4
- 18
1.14
29
127-5588
-4
1/4
- 18
-6
3/8
- 18
1.14
29
003-9514
-6
3/8
- 18
-6
3/8
- 18
1.14
29
8D-9448
-6
3/8
- 18
-6
3/8
- 18
1.38
35
044-4101
-8
1/2
- 14
-8
1/2
- 14
1.50
38
109-9866
-16
2.99
76
1 - 11 1/2
B NPTF THREAD DASH SIZE
-16
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
L LENGTH (in) (mm)
Adapters
A NPTF THREAD SIZE (in - TPI)
175
NPTF Adapters NPTF Female / NPTF Female - 45° Elbow
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
3B-6493
-2
1/8
- 27
-2
1/8
- 27
0.51
13
0.51
13
5P-4818
-4
1/4
- 18
-4
1/4
- 18
0.71
18
0.71
18
5P-8934
-6
3/8
- 18
-6
3/8
- 18
0.75
19
0.75
19
3B-6497
-8
1/2
- 14
-8
1/2
- 14
0.87
22
0.87
22
3B-7728
-12
3/4
- 14
-12
3/4
- 14
0.98
25
0.98
25
1 - 11
1/2
B NPTF THREAD DASH SIZE
-16
B NPTF THREAD SIZE (in - TPI)
1 - 11
1/2
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
4B-9030
-16
1.14
29
1.14
29
2N-3542
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.22
31
1.22
31
160-7086
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
1.69
43
1.69
43
2L-2813
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
1.46
37
1.46
37
5N-2638
-32
2 - 11 1/2
-32
2 - 11 1/2
1.46
37
1.46
37
8F-3271
-32
2 - 11 1/2
-32
2 - 11 1/2
1.69
43
1.69
43
7F-7652
-56
3 1/2 - 8
-56
3 1/2 - 8
2.36
60
2.36
60
Adapters
NPTF Female / NPTF Female - 90° Elbow
176
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
3B-6494
-2
1/8
- 27
-2
1/8
- 27
0.71
18
0.71
18
8B-4884
-2
1/8
- 27
-2
1/8
- 27
0.67
17
0.67
17
3B-7729
-4
1/4
- 18
-4
1/4
- 18
0.83
21
0.83
21
003-8747
-4
1/4
- 18
-4
1/4
- 18
0.87
22
0.87
22
3B-6767
-4
1/4
- 18
-4
1/4
- 18
0.79
20
0.79
20
7B-1480
-4
1/4
- 18
-6
3/8
- 18
0.87
22
0.87
22
003-9014
-6
3/8
- 18
-6
3/8
- 18
1.02
26
1.02
26
008-2649
-6
3/8
- 18
-6
3/8
- 18
0.83
21
1.22
31
3B-6495
-6
3/8
- 18
-6
3/8
- 18
0.94
24
0.94
24
5B-8279
-6
3/8
- 18
-8
1/2
- 14
1.14
29
0.94
24
1Y-0412
-8
1/2
- 14
-8
1/2
- 14
1.22
31
1.22
31
8F-9055
-8
1/2
- 14
-8
1/2
- 14
1.10
28
1.10
28
3B-6496
-8
1/2
- 14
-8
1/2
- 14
1.14
29
1.14
29
3F-1783
-8
1/2
- 14
-12
3/4
- 14
1.26
32
1.18
30
4B-5984
-12
3/4
- 14
-12
3/4
- 14
1.30
33
1.30
33
3B-6554
-12
3/4
- 14
-12
3/4
- 14
1.89
48
1.30
33
1K-6937
-12
3/4
- 14
-12
3/4
- 14
1.38
35
1.38
35
7L-8074
-12
3/4
- 14
-16
1 - 11 1/2
1.46
37
1.38
35
6V-7538
-12
3/4
- 14
-20
1 1/4 - 11 1/2
1.61
41
1.50
38
152-9842
-16
1 - 11 1/2
-16
1 - 11 1/2
1.61
41
1.61
41
1L-0254
-16
1 - 11
1/2
-16
1 - 11
1/2
1.61
41
1.61
41
3B-6498
-16
1 - 11 1/2
-16
1 - 11 1/2
1.46
37
1.46
37
3L-9071
-16
1 - 11 1/2
-20
1 1/4 - 11 1/2
1.57
40
1.61
41
1H-7742
-20
1 1/4 - 11 1/2
-16
1 - 11 1/2
1.81
46
1.73
44
6B-6766
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.69
43
1.69
43
3B-6499
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.73
44
1.73
44
6L-4382
-20
1 1/2 - 11 1/2
-24
1 1/4 - 11 1/2
1.89
48
1.81
46
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
NPTF Adapters NPTF Female / NPTF Female - 90° Elbow (continued)
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
8C-7566
-20
1 1/4 - 11 1/2 1/4
L2 LENGTH (in) (mm)
-24
1 1/2 - 11 1/2
1.77
45
1.81
46
1/2
-32
2 - 11 1/2
2.13
54
1.93
49
131-9366
-20
1
018-6477
-24
1 1/2 - 11 1/2
-16
1 - 11 1/2
1.73
44
1.89
48
7B-3395
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
1.85
47
1.85
47
152-9843
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.09
53
2.09
53
1/2
1/2
- 11
L1 LENGTH (in) (mm)
- 11
1/2
1/2
6B-3685
-24
1
-24
1
1.93
49
1.93
49
6F-8856
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
- 11
2.13
54
2.13
54
8B-9913
-24
1 1/2 - 11 1/2
-32
2 - 11 1/2
2.24
57
1.93
49
3N-7602
-32
2 - 11 1/2
-32
2 - 11 1/2
2.13
54
2.13
54
3B-6500
-32
2 - 11 1/2
-32
2 - 11 1/2
2.24
57
2.24
57
144-0858
-48
3-8
-40
2 1/2 - 12
2.87
73
2.99
76
140-5979
-48
3-8
-48
3-8
3.74
95
3.74
95
7F-7651
-56
3 1/2 - 8
-56
3 1/2 - 8
3.43
87
3.43
87
STOR Boss / NPTF Male
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
169-6713
-3
3/8
- 24
-2
1/8
- 27
0.91
23
3E-7448
-4
7/16
- 20
-6
3/8
- 18
1.22
31
108-2197
-4
7/16
- 20
-2
1/8
- 27
1.02
26
1W-6256
-10
7/8
-8
1/2
- 14
0.00
0
8C-3991
-24
2.24
57
- 14
1 7/8 - 12
B NPTF THREAD DASH SIZE
-24
B NPTF THREAD SIZE (in - TPI)
1 1/2 - 11 1/2
L LENGTH (in) (mm)
STOR Boss / NPTF Male - 45° Elbow
087-0491
-6
A STOR THREAD SIZE (in - TPI) 9/16
- 18
B NPTF THREAD DASH SIZE
-4
B NPTF THREAD SIZE (in - TPI) 1/4
- 18
L1 LENGTH (in) (mm)
0.67
17
L2 LENGTH (in) (mm)
0.94
24
177
Adapters
PART NUMBER
A STOR THREAD DASH SIZE
NPTF Adapters L2
STOR Boss / NPTF Male - 90° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
2T-2475
-8
B
L1
9X-2101
-16
A STOR THREAD SIZE (in - TPI) 3/4
- 16
5/16
1
- 12
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI) 3/8
-6 -16
- 18
1 - 11 1/2
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
1.46
37
1.02
26
2.17
55
1.61
41
A
STOR Boss / NPTF Female
PART NUMBER
A STOR THREAD DASH SIZE
5P-2937
-4
7/16
- 20
-4
1/4
- 18
1.06
27
5P-5528
-4
7/16
- 20
-2
1/8
- 27
0.98
25
5P-4675
-5
1/2
- 20
-4
1/4
- 18
1.06
27
5P-4487
-5
1/2
- 20
-2
1/8
- 27
1.02
26
5P-3501
-6
9/16
- 18
-4
1/4
- 18
1.10
28
3Y-2888
-6
9/16
- 18
-2
1/8
- 27
0.75
19
9Y-2238
-8
3/4
- 16
-12
3/4
- 14
1.77
45
5P-1838
-8
3/4
- 16
-6
3/8
- 18
1.22
31
8J-7844
-8
3/4
- 16
-4
1/4
- 18
1.06
27
5P-4481
-10
7/8
- 14
-8
1/2
- 14
1.54
39
6H-4746
-10
7/8
- 14
-2
1/8
- 27
0.91
23
6V-7483
-12
-12
3/4
- 14
1.65
42
1 1/16 - 12
B NPTF THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
6L-9952
-12
1
- 12
-8
- 14
1.38
35
5P-3415
-12
1 1/16 - 12
-4
1/4
- 18
1.10
28
6V-6760
-14
1 3/16 - 12
-8
1/2
- 14
1.10
28
5P-0492
-16
1 5/16 - 12
-16
1.89
48
119-0572
-16
1 5/16 - 12
-8
1/2
- 14
0.98
25
3T-0811
-16
1 5/16 - 12
-4
1/4
- 18
1.10
28
9X-2515
-24
1 7/8 - 12
-24
2.13
54
8C-4293
-24
1 7/8 - 12
-12
1.26
32
2.24
57
-32
1/16
B NPTF THREAD DASH SIZE
1/2
9X-2514 Adapters
A STOR THREAD SIZE (in - TPI)
2
1/2
- 12
1 - 11 1/2
1 1/2 - 11 1/2 3/4
-32
- 14
2 - 11
1/2
STOR Boss / NPTF Female - 90° Elbow
178
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
106-2105
-6
9/16
- 18
-4
1/4
- 18
1.30
33
0.87
22
6I-6547
-8
3/4
- 16
-6
3/8
- 18
1.65
42
0.63
16
3/4
- 14
2.05
52
1.38
35
4.61
117
1.61
41
1/16
B NPTF THREAD DASH SIZE
9X-2604
-12
1
- 12
-12
7X-7705
-16
1 5/16 - 12
-16
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
NPTF Adapters NPTF Male / NPTF Female / NPTF Female - Tee
L2
L2
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
004-4914
-2
1/8
6V-1240
-2
1/8
004-5933
-4
002-5299 6V-3530
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
C NPTF THREAD DASH SIZE
C NPTF THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-2
1/8
- 27
-2
1/8
- 27
0.67
17
0.55
14
- 27
-2
1/8
- 27
-2
1/8
- 27
0.79
20
0.67
17
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
1.10
28
0.87
22
-6
3/8
- 18
-6
3/8
- 18
-6
3/8
- 18
1.22
31
1.02
26
-6
3/8
- 18
-6
3/8
- 18
-6
3/8
- 18
0.98
25
0.83
21
033-2177
-8
1/2
- 14
-8
1/2
- 14
-8
1/2
- 14
1.46
37
1.22
31
5P-8753
-12
3/4
- 14
-12
3/4
- 14
-12
3/4
- 14
1.57
40
1.34
34
2P-1306
-16
1.97
50
1.61
41
- 27
1 - 11 1/2
-16
1 - 11 1/2
1 - 11 1/2
-16
NPTF Female / NPTF Male / NPTF Male - Tee
B
PART NUMBER
A NPTF THRD DASH SIZE
5P-9385
-2
B
L1
A
A NPTF THREAD SIZE (in - TPI) 1/8
- 27
B NPTF THRD DASH SIZE
-2
B NPTF THREAD SIZE (in - TPI) 1/8
L1 LENGTH (in) (mm)
- 27
0.67
17
L2 LENGTH (in) (mm)
0.79
20
NPTF Female / NPTF Female / NPTF Male - Tee
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
5P-3422
-2
1/8
1F-9369
-2
1/8
3Y-2889
-2
2D-7325
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
C NPTF THREAD DASH SIZE
C NPTF THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
1/8
- 27
-2
1/8
- 27
0.67
17
0.67
17
- 27
-2
1/8
- 27
-2
1/8
- 27
0.75
19
0.75
19
1/8
- 27
-4
1/4
- 18
-12
3/4
- 14
0.55
14
0.59
15
-4
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
0.87
22
0.87
22
1F-1651
-4
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
0.79
20
0.79
20
3L-6521
-4
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
0.83
21
0.83
21
8L-6005
-6
3/8
- 18
-6
3/8
- 18
-6
3/8
- 18
1.02
26
1.02
26
6B-7639
-6
3/8
- 18
-6
3/8
- 18
-6
3/8
- 18
0.94
24
0.94
24
5B-8978
-8
1/2
- 14
-8
1/2
- 14
-8
1/2
- 14
1.10
28
1.10
28
5L-5502
-8
1/2
- 14
-8
1/2
- 14
-8
1/2
- 14
1.10
28
1.10
28
4K-2430
-8
1/2
- 14
-8
1/2
- 14
-12
3/4
- 14
1.38
35
1.34
34
052-0726
-12
3/4
- 14
-12
3/4
- 14
-12
3/4
- 14
1.38
35
1.38
35
1N-8559
-12
3/4
- 14
-12
3/4
- 14
-12
3/4
- 14
1.30
33
1.38
35
1L-4031
-16
1 - 11 1/2
-16
1 - 11 1/2
-16
1 - 11 1/2
1.50
38
1.50
38
4L-1848
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.77
45
1.77
45
179
Adapters
-2
- 27
NPTF Adapters
Adapters
NPTF Female / NPTF Female / NPTF Female - Tee
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
5P-3741
-2
1/8
3B-7900
-2
1/8
1Y-7551
-2
9B-1964 3B-7762
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
C NPTF THREAD DASH SIZE
C NPTF THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-2
1/8
- 27
-2
1/8
- 27
0.67
17
0.67
17
- 27
-2
1/8
- 27
-2
1/8
- 27
0.55
14
0.55
14
1/8
- 27
-2
1/8
- 27
-2
1/8
- 27
0.71
18
0.71
18
-4
1/4
- 18
-2
1/8
- 27
-2
1/8
- 27
0.79
20
0.79
20
-4
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
0.71
18
0.71
18
006-0210
-4
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
0.87
22
0.87
22
8B-1261
-4
1/4
- 18
-4
1/4
- 18
-4
1/4
- 18
0.83
21
0.83
21
6V-1739
-4
1/4
- 18
-6
3/8
- 18
-6
3/8
- 18
0.94
24
0.94
24
003-8470
-6
3/8
- 18
-6
3/8
- 18
-6
3/8
- 18
1.02
26
1.02
26
6B-2982
-6
3/8
- 18
-6
3/8
- 18
-6
3/8
- 18
0.94
24
0.94
24
3H-2891
-6
3/8
- 18
-6
3/8
- 18
-8
1/2
- 14
1.06
27
0.94
24
2L-0332
-6
3/8
- 18
-8
1/2
- 14
-8
1/2
- 14
1.06
27
1.06
27
8F-2393
-8
1/2
- 14
-6
3/8
- 18
-6
3/8
- 18
1.14
29
0.94
24
2L-3623
-8
1/2
- 14
-8
1/2
- 14
-4
1/4
- 18
1.14
29
1.14
29
5B-8979
-8
1/2
- 14
-8
1/2
- 14
-8
1/2
- 14
1.14
29
1.14
29
1Y-0413
-8
1/2
- 14
-8
1/2
- 14
-8
1/2
- 14
1.22
31
1.22
31
8F-0884
-8
1/2
- 14
-8
1/2
- 14
-8
1/2
- 14
1.02
26
1.02
26
5L-3993
-8
1/2
- 14
-8
1/2
- 14
-12
3/4
- 14
1.26
32
1.10
28
4B-7107
-8
1/2
- 14
-20
1.50
38
1.30
33
018-9439
-12
3/4
- 14
-8
1/2
- 14
-8
1/2
- 14
1.26
32
1.30
33
3L-3358
-12
3/4
- 14
-8
1/2
- 14
-8
1/2
- 14
1.30
33
1.10
28
1L-8444
-12
3/4
- 14
-12
3/4
-12
3/4
- 14
1.30
33
1.30
33
2N-3599
-12
3/4
- 14
-16
1.50
38
1.38
35
6F-0496
-16
1 - 11 1/2
-12
1.50
38
1.30
33
4B-7770
-16
1 - 11 1/2
-16
1 - 11 1/2
-16
1 - 11 1/2
1.50
38
1.50
38
5L-8289
-16
1 - 11 1/2
-16
1 - 11 1/2
-24
1 1/2 - 11 1/2
1.73
44
1.46
37
106-3401
-16
1 - 11 1/2
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.73
44
1.57
40
8B-9579
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.77
45
1.77
45
8C-3346
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
-8
1.93
49
1.93
49
1/2
1/2
- 27
- 11
1/2
1 1/4 - 11 1/2
- 14
1 - 11 1/2 3/4
1/2
- 14
- 11
1 1/4 - 11 1/2
-20
1 - 11 1/2
-16
3/4
-12
1/2
1/2
- 14
1/2
- 14
6F-7701
-24
1
-24
1
-24
1
2.13
54
2.13
54
1L-2782
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
- 11
1.93
49
1.93
49
6L-7322
-32
2 - 11 1/2
-32
2 - 11 1/2
-32
2 - 11 1/2
2.24
57
2.24
57
140-5980
-32
38
-32
38
-32
38
3.74
95
3.74
95
3N-9749
-32
2 - 11 1/2
-32
2 - 11 1/2
-32
2 - 11 1/2
2.13
54
2.13
54
5N-2642
-64
4-8
-64
4-8
-64
4-8
3.78
96
3.78
96
NPTF Female / STOR Boss / STOR Port - Tee L-2
L-3
B
L-1 C A
180
PART NUMBER
A NPTF THRD DASH SIZE
9X-2296
-4
A NPTF THREAD SIZE (in - TPI) 1/4
- 18
B STOR THRD DASH SIZE
-4
B STOR THREAD SIZE (in - TPI) 7/16
- 20
C STOR THRD DASH SIZE
-4
C STOR THREAD SIZE (in -TPI) 7/16
- 20
L1 LENGTH (in) (mm)
0.87
22
L2 LENGTH (in) (mm)
0.87
22
L3 LENGTH (in) (mm)
1.38
35
NPTF Adapters L
L
NPTF Female / NPTF Female / NPTF Female / NPTF Female - Cross
C
L D
B
L
A
PART NUMBER
A -D NPTF THREAD DASH SIZE
A-D NPTF THREAD SIZE (in - TPI)
5P-2423
-2
1/8
- 27
0.67
17
7B-0192
-4
1/4
- 18
0.75
19
3D-4022
-8
1/2
- 14
1.14
29
8L-7971
-12
3/4
- 14
1.30
33
5P-1907
-16
1 - 11 1/2
1.50
38
169-3678
-24
1 1/2 - 11 1/2
2.09
53
9X-2131
-32
2 - 11 1/2
2.40
61
L LENGTH (in) (mm)
Adapters
181
JIC Adapters JIC 37° Male / JIC 37° Male
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
3J-7355
-4
7/16
- 20
-4
7/16
- 20
1.38
35
030-7984
-4
7/16
- 20
-6
9/16
- 18
1.34
34
061-6740
-4
7/16
- 20
-8
3/4
- 16
1.50
38
061-9185
-4
7/16
- 20
-10
7/8
- 14
1.65
42
7J-6418
-5
1/2
- 20
-5
1/2
- 20
1.38
35
7K-2521
-5
1/2
- 20
-8
3/4
- 16
1.50
38
7K-4129
-6
9/16
- 18
-6
9/16
- 18
1.42
36
061-6737
-6
9/16
- 18
-8
3/4
- 16
1.50
38
053-3153
-6
9/16
- 18
-10
7/8
- 14
1.69
43
4R-8697
-8
3/4
- 16
-8
3/4
- 16
1.61
41
3R-2704
-8
3/4
- 16
-8
3/4
- 16
1.65
42
7D-5657
-8
3/4
- 16
-8
3/4
- 16
2.48
63
030-7982
-8
3/4
- 16
-10
7/8
- 14
1.77
45
3R-2705
-8
3/4
- 16
-12
1
1/16
- 12
1.97
50
061-9787
-8
3/4
- 16
-16
1 5/16 - 12
2.01
51
061-8248
-10
7/8
- 14
-10
7/8
- 14
1.89
48
7G-4334
-10
7/8
- 14
-10
7/8
- 14
3.07
78
030-7983
-10
7/8
- 14
-12
1 1/16 - 12
2.05
52
9S-7739
-12
1 1/16 - 12
-12
1 1/16 - 12
2.17
55
2P-2206
-14
1 3/16 - 12
-14
1 3/16 - 12
2.20
56
9S-7754
-16
1 5/16 - 12
-16
1 5/16 - 12
2.24
57
5/16
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
5/8
L LENGTH (in) (mm)
061-6739
-16
1
- 12
-20
1
- 12
2.36
60
068-4152
-20
1 5/8 - 12
-20
1 5/8 - 12
2.44
62
7X-7904
-24
1 7/8 - 12
-24
1 7/8 - 12
2.76
70
Adapters
JIC 37° Male / JIC 37° Male - 90° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
067-6495
-4
7/16
- 20
-4
7/16
- 20
0.91
23
061-8257
-6
9/16
- 18
-6
9/16
- 18
1.06
27
5P-6399
-8
3/4
- 16
-8
3/4
- 16
1.26
32
5P-4900
-10
7/8
- 14
-10
7/8
- 14
1.46
37
3R-3976
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
6V-8762
-14
1 3/16 - 12
-14
1 3/16 - 12
1.73
44
5P-0912
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
5P-2303
-20
1 5/8 - 12
-20
1 5/8 - 12
2.05
52
2.32
59
5R-9235
182
-24
A JIC THREAD SIZE (in - TPI)
1
7/8
- 12
B JIC THREAD DASH SIZE
-24
B JIC THREAD SIZE (in - TPI)
1
7/8
- 12
L LENGTH (in) (mm)
JIC Adapters JIC 37° Male / JIC 37° Female Swivel - 45° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
030-7961
-4
7/16
- 20
-4
7/16
- 20
0.71
18
0.94
24
031-1864
-5
1/2
- 20
-5
1/2
- 20
0.79
20
0.98
25
030-7962
-6
9/16
- 18
-6
9/16
- 18
0.83
21
1.10
28
030-7963
-8
3/4
- 16
-8
3/4
- 16
0.98
25
1.30
33
030-7964
-10
7/8
- 14
-10
7/8
- 14
1.10
28
1.46
37
030-7965
-12
1
1/16
- 12
-12
1
1/16
- 12
1.30
33
1.50
38
5P-0789
-14
1 3/16 - 12
-14
1 3/16 - 12
1.38
35
1.61
41
030-7966
-16
1 5/16 - 12
-16
1 5/16 - 12
1.46
37
1.73
44
030-7967
-20
1 5/8 - 12
-20
1 5/8 - 12
1.57
40
2.05
52
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
JIC 37° Male / JIC 37° Female Swivel - 90° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
7K-9197
-4
7/16
- 20
-4
7/16
- 20
0.91
23
0.98
25
148-1740
-4
7/16
- 20
-6
9/16
- 18
1.06
27
1.26
32
7K-3324
-5
1/2
- 20
-5
1/2
- 20
0.94
24
1.06
27
5P-9464
-6
9/16
- 18
-4
7/16
- 20
1.06
27
1.14
29
6K-9194
-6
9/16
- 18
-6
9/16
- 18
1.06
27
1.26
32
112-4387
-8
3/4
- 16
-6
9/16
- 18
1.26
32
0.94
24
8M-0547
-8
3/4
- 16
-8
3/4
- 16
1.26
32
1.38
35
8K-2396
-10
7/8
- 14
-8
3/4
- 16
1.46
37
1.54
39
030-7972
-10
7/8
- 14
-10
7/8
- 14
1.46
37
1.61
41
2M-9786
-12
1 1/16 - 12
-10
7/8
- 14
1.65
42
1.69
43
3R-9704
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
1.77
45
054-3921
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
1.73
44
6S-2910
-14
1 3/16 - 12
-14
1 3/16 - 12
1.73
44
1.77
45
031-5744
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
2.01
51
149-3188
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
2.01
51
5/8
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
5/8
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-20
1
- 12
-20
1
- 12
2.05
52
1.54
39
030-7975
-20
1 5/8 - 12
-20
1 5/8 - 12
2.05
52
2.32
59
5R-8894
-24
1 7/8 - 12
-24
1 7/8 - 12
2.32
59
1.85
47
JIC 37° Male / JIC 37° Female Swivel - Loose Nut
A B
L
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
8T-0398
-4
7/16
- 20
-4
7/16
- 20
0.98
25 8L-3161
030-8142
-4
7/16
- 20
-6
9/16
- 18
0.98
25 3R-4437
7J-5614
-4
7/16
- 20
-8
3/4
- 16
0.98
25 1P-1441
030-6935
-4
7/16
- 20
-10
7/8
- 14
1.02
26 5H-0275
L NUT LENGTH PART (in) (mm) NUMBER
183
Adapters
5R-8781
JIC Adapters JIC 37° Male / JIC 37° Female Swivel - Loose Nut (continued)
A B
L
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
061-8268
-4
7/16
- 20
-12
1.10
28 8M-0744
030-8144
-6
9/16
- 18
-8
3/4
- 16
0.98
25 1P-1441
030-8145
-6
9/16
- 18
-10
7/8
- 14
1.02
26 5H-0275
030-6936
-6
9/16
- 18
-12
1 1/16 - 12
1.10
28 8M-0744
8M-0745
-8
3/4
- 16
-12
1 1/16 - 12
1.18
30 8M-0744
072-9601
-10
7/8
-16
1
- 12
1.38
35 1P-0043
067-6684
-12
1 1/16 - 12
-16
1 5/16 - 12
1.46
37 1P-0043
068-6078
-12
1 1/16 - 12
-20
1 5/8 - 12
1.54
39 2P-8148
6V-0411
-16
1 5/16 - 12
-20
1 5/8 - 12
1.57
40 2P-8148
- 14
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
1 1/16 - 12
5/16
L NUT LENGTH PART (in) (mm) NUMBER
JIC 37° Male / JIC 37° Female Swivel - Captive Nut L
37° B
A
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
5P-5009
-4
7/16
5P-5008
-4
7/16
5P-5007
-4
5P-5006
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-5
1/2
- 20
1.22
31
- 20
-6
9/16
- 18
1.26
32
7/16
- 20
-8
3/4
- 16
1.50
38
-4
7/16
- 20
-10
7/8
- 14
1.97
50
5P-5005
-4
7/16
- 20
-12
1 1/16 - 12
2.13
54
5P-5004
-4
7/16
- 20
-14
1 3/16 - 12
2.20
56
5P-5003
-4
7/16
- 20
-16
1 5/16 - 12
2.28
58
5P-7540
-8
3/4
- 16
5P-8228
-8
3/4
- 16
6V-9012
-10
7/8
8T-2270
-10
5P-1945
-10
5R-8782
-20
7X-7686
-24
- 20
-6
9/16
- 18
1.73
44
-10
7/8
- 14
1.42
36
- 14
-8
3/4
- 16
1.81
46
7/8
- 14
-10
7/8
- 14
3.54
90
7/8
- 14
-12
1 1/16 - 12
1.81
46
1 5/8 - 12
-24
1 7/8 - 12
2.56
65
1 7/8 - 12
-16
1 5/16 - 12
2.83
72
B JIC THREAD SIZE (in - TPI)
Adapters
JIC 37° Male / JIC 37° Female L
37° A
184
B
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
5P-9789
-12
1 1/16 - 12
-8
3/4
1.57
40
6V-7484
-14
1
- 12
-16
1 5/16 - 12
1.93
49
8C-6713
-20
1 5/8 - 12
-16
1 5/16 - 12
2.01
51
3/16
- 16
L LENGTH (in) (mm)
JIC Adapters L
JIC 37° Male / NPTF Male
PART NUMBER
A JIC THREAD DASH SIZE
6V-1389
-2
5/16
- 24
-2
1/8
- 27
1.10
28
5P-6437
-4
7/16
- 20
-2
1/8
- 27
2.32
59
8L-6557
-4
7/16
- 20
-2
1/8
- 27
1.22
31
4S-6399
-4
7/16
- 20
-4
1/4
- 18
1.42
36
143-9199
-4
7/16
- 20
-4
1/4
- 18
2.09
53
001-6449
-4
7/16
- 20
-6
3/8
- 18
1.42
36
001-9440
-4
7/16
- 20
-8
1/2
- 14
1.69
43
001-7025
-5
1/2
- 20
-2
1/8
- 27
1.22
31
6L-9781
-6
9/16
- 18
-2
1/8
- 27
1.26
32
032-1267
-6
9/16
- 18
-4
1/4
- 18
1.42
36
5P-6661
-6
9/16
- 18
-4
1/4
- 18
2.24
57
8L-3282
-6
9/16
- 18
-6
3/8
- 18
1.42
36
8N-9072
-6
9/16
- 18
-8
1/2
- 14
1.42
36
136-2802
-6
9/16
- 18
-8
1/2
- 14
1.89
48
7D-5363
-6
9/16
- 18
-8
1/2
- 14
1.69
43
061-9463
-8
3/4
- 16
-4
1/4
- 18
1.54
39
8M-0755
-8
3/4
- 16
-6
3/8
- 18
1.54
39
146-0763
-8
3/4
- 16
-8
1/2
- 14
2.95
75
3R-5387
-8
3/4
- 16
-8
1/2
- 14
1.77
45
118-0280
-8
3/4
- 16
-8
1/2
- 14
2.80
71
004-7626
-8
3/4
- 16
-12
3/4
- 14
1.85
47
001-7004
-10
7/8
- 14
-6
3/8
- 18
1.69
43
9M-6522
-10
7/8
- 14
-8
1/2
- 14
1.89
48
001-6412
-10
7/8
- 14
-12
3/4
- 14
1.97
50
030-8310
-12
1 1/16 - 12
-8
1/2
- 14
2.05
52
4S-6678
-12
1 1/16 - 12
-12
3/4
- 14
2.05
52
004-3099
-12
1 1/16 - 12
-16
2.24
57
001-7003
-14
1 3/16 - 12
-8
1/2
- 14
2.09
53
2P-1289
-14
1 3/16 - 12
-12
3/4
- 14
2.09
53
- 14
2.05
52
- 14
2.13
54
37°
A
B
A JIC THREAD SIZE (in - TPI)
3/16
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
L LENGTH (in) (mm)
-14
1
- 12
-12
030-8307
-16
1 5/16 - 12
-12
3/4
009-4440
-16
1 5/16 - 12
-16
1 - 11 1/2
2.28
58
6K-3459
-16
1 5/16 - 12
-20
1 1/4 - 11 1/2
2.40
61
6K-3457
-20
1 5/8 - 12
-20
1 1/4 - 11 1/2
2.44
62
035-0750
-20
1 5/8 - 12
-24
1 - 11 1/2
2.40
61
144-5610
-24
1 7/8 - 12
-12
2.44
62
4R-8670
-24
1 7/8 - 14
-16
1 - 11 1/2
2.64
67
1/4
1/2
7/8
3/4
- 14
030-8309
-24
1
- 12
-20
1
2.64
67
140-5866
-24
1 7/8 - 12
-24
1 1/2 - 11 1/2
- 11
2.68
68
6V-0430
-32
2 1/2 - 12
-32
2 - 11 1/2
3.11
79
Adapters
001-7041
3/4
185
JIC Adapters JIC 37° Male / NPTF Male - 45° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
9L-5125
-4
7/16
- 20
-2
1/8
- 27
0.71
18
0.63
16
5J-7303
-4
7/16
- 20
-4
1/4
- 18
0.83
21
0.87
22
121-5729
-4
7/16
- 20
-8
1/2
- 14
0.91
23
1.18
30
001-6498
-6
9/16
- 18
-4
1/4
- 18
0.83
21
0.87
22
4W-4076
-6
9/16
- 18
-6
3/8
- 18
0.83
21
0.94
24
2N-1288
-8
3/4
- 16
-6
3/8
- 18
0.98
25
0.94
24
001-7043
-8
3/4
- 16
-8
1/2
- 14
1.10
28
1.18
30
090-3000
-10
7/8
- 14
-6
3/8
- 18
1.10
28
1.18
30
9L-5254
-10
7/8
- 14
-8
1/2
- 14
1.10
28
1.18
30
031-6303
-12
1 1/16 - 12
-8
1/2
- 14
1.26
32
1.18
30
001-6304
-12
1 1/16 - 12
-12
3/4
- 14
1.26
32
1.18
30
033-8734
-12
1 1/16 - 12
-16
1.42
36
1.50
38
2P-1311
-14
1 3/16 - 12
-12
3/4
- 14
1.38
35
1.26
32
3/4
- 14
5/16
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
001-7042
-16
1
- 12
-12
1.46
37
1.26
32
2P-1312
-16
1 5/16 - 12
-16
1 - 11 1/2
1.46
37
1.50
38
032-1416
-20
1 5/8 - 12
-24
1 1/2 - 11 1/2
1.65
42
1.77
45
031-4629
-24
1 7/8 - 12
-24
1 1/2 - 11 1/2
1.77
45
1.77
45
Adapters
JIC 37° Male / NPTF Male - 90° Elbow
186
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
7K-3030
-3
3/8
- 24
-2
1/8
- 27
0.83
21
0.71
18
2N-1287
-4
7/16
- 20
-2
1/8
- 27
0.91
23
0.79
20
5P-4479
-4
7/16
- 20
-2
1/8
- 27
0.91
23
1.18
30
4R-8605
-4
7/16
- 20
-4
1/4
- 18
0.98
25
0.98
25
5P-2657
-4
7/16
- 20
-4
1/4
- 18
1.06
27
1.69
43
6K-1972
-4
7/16
- 20
-4
1/4
- 18
1.06
27
1.10
28
123-8580
-4
7/16
- 20
-4
1/4
- 18
1.06
27
1.10
28
7J-6420
-5
1/2
- 20
-2
1/8
- 27
0.94
24
0.79
20
8J-3031
-5
1/2
- 20
-4
1/4
- 18
1.02
26
0.91
23
5P-8238
-5
1/2
- 20
-4
1/4
- 18
1.06
27
1.10
28
5P-4592
-6
9/16
- 18
-2
1/8
- 27
1.06
27
0.98
25
8T-0169
-6
9/16
- 18
-4
1/4
- 18
1.06
27
1.57
40
032-1268
-6
9/16
- 18
-4
1/4
- 18
1.06
27
1.10
28
5P-3273
-6
9/16
- 18
-6
3/8
- 18
1.34
34
1.02
26
2N-8037
-6
9/16
- 18
-6
3/8
- 18
1.18
30
1.22
31
7D-8793
-6
9/16
- 18
-8
1/2
- 14
1.26
32
1.46
37
009-9696
-8
3/4
- 16
-4
1/4
- 18
1.26
32
2.20
56
6L-9777
-8
3/4
- 16
-4
1/4
- 18
1.26
32
1.22
31
7L-7262
-8
3/4
- 16
-6
3/8
- 18
1.26
32
1.22
31
4R-8604
-8
3/4
- 16
-6
3/8
- 18
1.26
32
1.22
31
9L-5094
-8
3/4
- 16
-6
3/8
- 18
1.26
32
1.81
46
003-0632
-8
3/4
- 16
-6
3/8
- 18
1.26
32
4.25
108
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
JIC Adapters JIC 37° Male / NPTF Male - 90° Elbow (continued)
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
4R-6450
-8
3/4
- 16
-8
1/2
- 14
1.42
36
1.46
37
003-0633
-8
3/4
- 16
-8
1/2
- 14
1.34
34
4.25
108
2N-3378
-8
3/4
- 16
-8
1/2
- 14
1.34
34
1.46
37
033-0442
-8
3/4
- 16
-8
1/2
- 14
1.34
34
2.24
57
052-0741
-8
3/4
- 16
-12
3/4
- 14
1.46
37
1.57
40
006-2325
-10
7/8
- 14
-6
3/8
- 18
1.46
37
1.30
33
031-6742
-10
7/8
- 14
-8
1/2
- 14
1.46
37
4.29
109
001-6936
-10
7/8
- 14
-8
1/2
- 14
1.46
37
2.20
56
033-0414
-10
7/8
- 14
-8
1/2
- 14
1.46
37
2.87
73
032-1269
-10
7/8
- 14
-8
1/2
- 14
1.46
37
1.46
37
061-6717
-10
7/8
- 14
-12
3/4
- 14
1.57
40
1.57
40
031-1358
-12
1 1/6 - 12
-8
1/2
- 14
1.65
42
1.57
40
001-5744
-12
1 1/6 - 12
-8
1/2
- 14
1.65
42
2.44
62
1/6
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
001-6301
-12
1
- 12
-12
3/4
- 14
1.65
42
1.57
40
002-1199
-12
1 1/6 - 12
-12
3/4
- 14
1.65
42
3.23
82
001-7039
-12
1 1/6 - 12
-12
3/4
- 14
1.65
42
2.44
62
2P-8511
-12
1 1/6 - 12
-16
1.77
45
1.97
50
031-0782
-14
1 3/16 - 12
-12
3/4
- 14
1.73
44
1.69
43
132-3134
-16
1 5/16 - 12
-12
3/4
- 14
1.81
46
1.77
45
9L-4007
-16
1 5/16 - 12
-12
3/4
- 14
1.81
46
1.77
45
6V-8649
-16
1 5/16 - 12
-12
3/4
- 14
1.81
46
2.32
59
5/16
1 - 11 1/2
1 - 11
1/2
9S-7296
-16
1
- 12
-16
1.81
46
1.97
50
030-0702
-16
1 5/16 - 12
-20
1 1/4 - 11 1/2
2.01
51
2.36
60
6K-3458
-20
1 5/8 - 12
-20
1 1/4 - 11 1/2
2.05
52
2.36
60
032-1357
-20
1 5/8 - 12
-24
1 1/2 - 11 1/2
2.20
56
2.64
67
032-1523
-24
1 7/8 - 12
-24
1 1/2 - 11 1/2
2.32
59
2.64
67
JIC 37° Male / NPTF Female
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
5D-9231
-4
7/16
- 20
-2
1/8
- 27
1.18
30
061-7921
-4
7/16
- 20
-4
1/4
- 18
1.34
34
7K-3762
-5
1/2
- 20
-2
1/8
- 27
1.18
30
5P-8869
-6
9/16
- 18
-4
1/4
- 18
1.42
36
053-0088
-6
9/16
- 18
-6
3/8
- 18
1.46
37
061-9413
-8
3/4
- 16
-6
3/8
- 18
1.57
40
6V-1846
-10
7/8
-8
1/2
- 14
1.89
48
061-8246
-12
1 1/16 - 12
-12
3/4
- 14
2.05
52
061-8962
-16
1 5/16 - 12
-16
1 - 11 1/2
2.36
60
152-9841
-24
1 7/8 - 12
-24
1 1/2 - 11 1/2
2.64
67
B NPTF THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
Adapters
- 14
B NPTF THREAD DASH SIZE
187
JIC Adapters JIC 37° Male / NPTF Female - 90° Elbow
L
PART NUMBER
A JIC THREAD DASH SIZE
3S-1099
-4
7/16
- 20
-2
1/8
- 27
1.06
27
0.67
17
123-8579
-4
7/16
- 20
-4
1/4
- 18
1.22
31
0.87
22
5P-1883
-6
9/16
- 18
-4
1/4
- 18
1.22
31
0.87
22
3N-3893
-16
2.17
55
1.61
41
Adapters
188
1 5/16 - 12
B NPTF THREAD DASH SIZE
-16
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
L1 LENGTH (in) (mm)
JIC 37° Male / STOR Boss
PART NUMBER
A JIC THREAD DASH SIZE
2P-1307
-3
3/8
119-8096
-4
7/16
6V-0394
-4
9K-5469
37°
A
A JIC THREAD SIZE (in - TPI)
B
A JIC THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-3
3/8
- 24
1.10
28
- 20
-2
5/16
- 24
1.26
32
7/16
- 20
-2
5/16
- 24
1.02
26
-4
7/16
- 20
-4
7/16
- 20
2.09
53
137-9145
-4
7/16
- 20
-4
7/16
- 20
1.10
28
3J-7352
-4
7/16
- 20
-4
7/16
- 20
1.22
31
030-6984
-4
7/16
- 20
-5
1/2
- 20
1.22
31
2P-1314
-4
7/16
- 20
-6
9/16
- 18
1.22
31
7I-2022
-4
7/16
- 20
-6
9/16
- 18
2.17
55
030-8193
-4
7/16
- 20
-8
3/4
- 16
1.38
35
030-8195
-4
7/16
- 20
-10
7/8
- 14
1.50
38
137-5614
-5
1/2
- 20
-4
7/16
- 20
2.95
75
6K-9354
-5
1/2
- 20
-5
1/2
- 20
1.22
31
5P-0419
-5
1/2
- 20
-6
9/16
- 18
1.30
33
030-3978
-6
9/16
- 18
-4
7/16
- 20
1.26
32
6V-9152
-6
9/16
- 18
-4
7/16
- 20
2.09
53
111-5562
-6
9/16
- 18
-4
7/16
- 20
2.76
70
5P-2618
-6
9/16
- 18
-5
1/2
- 20
1.26
32
030-7937
-6
9/16
- 18
-6
9/16
- 18
3.50
89
030-7936
-6
9/16
- 18
-6
9/16
- 18
1.89
48
6S-7744
-6
9/16
- 18
-6
9/16
- 18
1.65
42
1P-1376
-6
9/16
- 18
-6
9/16
- 18
0.00
0
2R-6806
-6
9/16
- 18
-6
9/16
- 18
1.30
33
5P-9097
-6
9/16
- 18
-6
9/16
- 18
1.30
33
8D-9088
-6
9/16
- 18
-8
3/4
- 16
2.13
54
030-8188
-6
9/16
- 18
-8
3/4
- 16
1.38
35
3E-7405
-6
9/16
- 18
-8
3/4
- 16
1.34
34
8T-3020
-6
9/16
- 18
-8
3/4
- 16
1.34
34
030-8194
-6
9/16
- 18
-10
7/8
- 14
1.50
38
8M-0506
-8
3/4
- 16
-6
9/16
- 18
1.42
36
6V-8925
-8
3/4
- 16
-6
9/16
- 18
1.38
35
8M-0505
-8
3/4
- 16
-8
3/4
- 16
1.50
38
030-8110
-8
3/4
- 16
-8
3/4
- 16
2.72
69
033-5691
-8
3/4
- 16
-10
7/8
- 14
2.76
70
6K-3607
-8
3/4
- 16
-10
7/8
- 14
1.61
41
- 24
L2 LENGTH (in) (mm)
JIC Adapters L
JIC 37° Male / STOR Boss (continued)
PART NUMBER
A JIC THREAD DASH SIZE
030-8189
-8
3/4
- 16
-12
1 1/16 - 12
1.77
45
2P-8430
-8
3/4
- 16
-16
1 5/16 - 12
1.77
45
053-1069
-10
7/8
- 14
-4
7/16
- 20
1.65
42
6V-4362
-10
7/8
- 14
-6
9/16
- 18
1.57
40
030-4285
-10
7/8
- 14
-8
3/4
- 16
2.80
71
2P-7636
-10
7/8
- 14
-8
3/4
- 16
0.00
0
9M-4584
-10
7/8
- 14
-10
7/8
- 14
1.69
43
2P-1292
-10
7/8
- 14
-10
7/8
- 14
3.03
77
030-8190
-10
7/8
- 14
-12
1 1/16 - 12
1.85
47
8K-0802
-10
7/8
- 14
-14
1 3/16 - 12
1.85
47
068-6074
-10
7/8
- 14
-16
1 5/16 - 12
1.89
48
5P-2574
-12
1 1/16 - 12
-8
3/4
- 16
1.81
46
5P-9973
-12
1 1/16 - 12
-10
7/8
- 14
1.85
47
- 14
4.92
125
- 14
1.89
48
37°
A
B
A JIC THREAD SIZE (in - TPI)
1/16
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
4V-8778
-12
1
- 12
-10
7/8
030-8196
-12
1 1/16 - 12
-10
7/8
9D-0884
-12
1 1/16 - 12
-12
1 1/16 - 12
2.76
70
2R-6276
-12
1 1/16 - 12
-12
1 1/16 - 12
1.97
50
3P-1427
-12
1 1/16 - 12
-12
1 1/16 - 12
3.31
84
5P-9172
-12
1 1/16 - 12
-12
1 1/16 - 12
4.41
112
7E-1456
-12
1 1/16 - 12
-14
1 3/16 - 12
5.31
135
9K-1242
-12
1 1/16 - 12
-14
1 3/16 - 12
1.97
50
1/16
5/16
4S-6680
-12
1
- 12
-16
1
- 12
2.01
51
2P-2061
-12
1 1/16 - 12
-20
1 5/8 - 12
2.09
53
8T-0195
-14
1 3/16 - 12
-10
6V-8857
-14
1 3/16 - 12
-12
6V-8856
-14
1 3/16 - 12
7/8
- 14
2.13
54
1 1/16 - 12
4.53
115
-12
1 1/16 - 12
2.01
51
7J-7187
-14
1
- 12
-14
1 3/16 - 12
2.01
51
6K-3626
-14
1 3/16 - 12
-16
1 5/16 - 12
2.01
51
031-4140
-16
1 5/16 - 12
-10
7/8
2.05
52
1/16
3/16
5/16
- 14
-16
1
- 12
-12
1
- 12
3.86
98
5G-7111
-16
1 5/16 - 12
-12
1 1/16 - 12
3.35
85
3R-6790
-16
1 5/16 - 12
-12
1 1/16 - 12
2.01
51
5P-3237
-16
1 5/16 - 12
-14
1 3/16 - 12
2.05
52
5P-4248
-16
1 5/16 - 12
-16
1 5/16 - 12
3.98
101
030-7935
-16
1 5/16 - 12
-16
1 5/16 - 12
2.05
52
8T-0700
-16
1 5/16 - 12
-16
1 5/16 - 12
3.15
80
115-1708
-16
1 5/16 - 12
-16
1 5/16 - 12
5.98
152
3P-0440
-16
1 5/16 - 12
-16
1 5/16 - 12
2.64
67
4S-6797
-16
1
- 12
-20
1 5/8 - 12
2.13
54
7D-5318
-20
1 5/8 - 12
-16
1 5/16 - 12
2.17
55
031-8759
-20
1 5/8 - 12
-20
1 5/8 - 12
2.17
55
5R-8883
-20
1 5/8 - 12
-24
1 7/8 - 12
2.24
57
6K-3460
-20
1 5/8 - 12
-24
1 7/8 - 12
2.09
53
6K-3461
-24
1 7/8 - 12
-24
1 7/8 - 12
2.36
60
7X-7678
-32
2 1/2 - 12
-32
2 1/2 - 12
2.80
71
5/16
Adapters
6V-1906
189
JIC Adapters JIC 37° Male / STOR Boss - 45° Elbow B A 37° L-2
L-1
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
030-7941
-4
7/16
- 20
-4
7/16
- 20
0.71
18
1.06
27
9L-8868
-4
7/16
- 20
-5
1/2
- 20
0.79
20
1.06
27
150-1545
-4
7/16
- 20
-6
9/16
- 18
0.71
18
1.14
29
031-6085
-5
1/2
- 20
-5
1/2
- 20
0.79
20
1.06
27
6V-9996
-6
9/16
- 18
-4
7/16
- 20
0.83
21
1.10
28
6V-2612
-6
9/16
- 18
-5
1/2
- 20
0.83
21
1.10
28
030-7942
-6
9/16
- 18
-6
9/16
- 18
0.83
21
1.14
29
7D-9984
-6
9/16
- 18
-8
3/4
- 16
0.87
22
1.30
33
030-7943
-8
3/4
- 16
-8
3/4
- 16
0.98
25
1.30
33
5P-4318
-8
3/4
- 16
-10
7/8
- 14
1.02
26
1.54
39
141-2375
-10
7/8
- 14
-8
3/4
- 16
1.10
28
1.42
36
6M-7476
-10
7/8
- 14
-10
7/8
- 14
1.10
28
1.54
39
5P-3264
-12
-10
7/8
- 14
1.30
33
1.57
40
1/16
1 1/16 - 12 1/16
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
3T-4389
-12
1
- 12
-12
1
- 12
1.30
33
1.73
44
030-7944
-12
1 1/16 - 12
-12
1 1/16 - 12
1.30
33
1.73
44
2P-8072
-12
1 1/16 - 12
-12
1 1/16 - 12
3.35
85
1.73
44
005-3969
-16
1 5/16 - 12
-12
1 1/16 - 12
1.46
37
1.85
47
030-7945
-16
1 5/16 - 12
-16
1 5/16 - 12
1.46
37
1.85
47
6V-2415
-16
1 5/16 - 12
-20
1 5/8 - 12
1.54
39
1.89
48
032-9267
-20
1 5/8 - 12
-20
1 5/8 - 12
1.57
40
1.93
49
031-9567
-24
1 7/8 - 12
-24
1 7/8 - 12
1.77
45
1.93
49
Adapters
JIC 37° Male / STOR Boss - 90° Elbow
190
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
4R-8686
-4
7/16
- 20
-4
7/16
- 20
0.91
23
1.02
26
030-7946
-4
7/16
- 20
-4
7/16
- 20
0.91
23
1.02
26
5P-3426
-4
7/16
- 20
-4
7/16
- 20
0.91
23
1.73
44
3N-1294
-4
7/16
- 20
-5
1/2
- 20
0.94
24
1.10
28
7J-4026
-4
7/16
- 20
-6
9/16
- 18
1.06
27
1.26
32
030-6816
-5
1/2
- 20
-5
1/2
- 20
0.94
24
1.10
28
6V-0416
-6
9/16
- 18
-4
7/16
- 20
1.06
27
1.57
40
5P-2645
-6
9/16
- 18
-4
7/16
- 20
1.06
27
1.18
30
8K-0968
-6
9/16
- 18
-5
1/2
- 20
1.06
27
1.18
30
030-7947
-6
9/16
- 18
-6
9/16
- 18
1.06
27
1.26
32
030-8156
-6
9/16
- 18
-6
9/16
- 18
1.06
27
2.20
56
2P-7214
-6
9/16
- 18
-6
9/16
- 18
1.06
27
2.09
53
005-4362
-6
9/16
- 18
-8
3/4
- 16
1.06
27
1.46
37
138-5049
-6
9/16
- 18
-10
7/8
- 14
1.26
32
1.69
43
107-2627
-8
3/4
- 16
-6
9/16
- 18
1.26
32
1.34
34
4K-6297
-8
3/4
- 16
-6
9/16
- 18
1.22
31
1.34
34
030-8276
-8
3/4
- 16
-6
9/16
- 18
1.26
32
2.80
71
030-8027
-8
3/4
- 16
-8
3/4
- 16
1.26
32
4.45
113
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
JIC Adapters JIC 37° Male / STOR Boss - 90° Elbow (continued)
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
3P-2001
-8
3/4
- 16
-8
3/4
- 16
1.26
32
2.52
64
005-4173
-8
3/4
- 16
-10
7/8
- 14
1.34
34
1.69
43
3P-2298
-8
3/4
- 16
-12
1.46
37
1.93
49
1P-7625
-10
7/8
- 14
-8
3/4
- 16
1.46
37
1.50
38
8K-6686
-10
7/8
- 14
-10
7/8
- 14
1.46
37
2.20
56
030-7949
-10
7/8
- 14
-10
7/8
- 14
1.46
37
1.69
43
149-4230
-10
7/8
- 14
-10
7/8
- 14
1.46
37
2.76
70
005-0658
-10
7/8
- 14
-12
1.54
39
1.93
49
032-8414
-12
1 1/16 - 12
-8
3/4
- 16
1.65
42
1.61
41
5Y-2209
-12
1 1/16 - 12
-10
7/8
- 14
1.65
42
1.81
46
068-4174
-12
1 1/16 - 12
-10
7/8
- 14
1.65
42
1.81
46
5P-3411
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
3.35
85
030-7950
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
1.93
49
1/16
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
1 1/16 - 12
1 1/16 - 12
1/16
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
034-2136
-12
1
- 12
-12
1
- 12
1.65
42
2.52
64
8K-2377
-12
1 1/16 - 12
-14
1 3/16 - 12
1.69
43
2.01
51
5P-3466
-12
1 1/16 - 12
-16
1 5/16 - 12
1.77
45
2.05
52
031-7600
-14
1 3/16 - 12
-14
1 3/16 - 12
1.73
44
2.01
51
008-8381
-16
1 5/16 - 12
-12
1 1/16 - 12
1.81
46
2.05
52
5P-6416
-16
1 5/16 - 12
-14
1 3/16 - 12
1.81
46
2.05
52
030-7951
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
2.05
52
030-0701
-16
1 5/16 - 12
-20
1 5/8 - 12
2.01
51
2.24
57
5/8
5/16
008-6325
-20
1
- 12
-16
1
- 12
2.05
52
2.24
57
6M-5652
-20
1 5/8 - 12
-20
1 5/8 - 12
2.05
52
2.24
57
030-7953
-24
1 7/8 - 12
-24
1 7/8 - 12
2.32
59
2.40
61
JIC 37° Male / STOR Port
PART NUMBER
A JIC THREAD DASH SIZE
5R-5107
-4
A JIC THREAD SIZE (in - TPI) 7/16
- 20
B STOR THREAD DASH SIZE
-4
B STOR THREAD SIZE (in - TPI) 7/16
- 20
L LENGTH (in) (mm)
1.89
48 Adapters
191
JIC Adapters JIC 37° Male / SAE 45° Inverted Flare Male
B
PART NUMBER
JIC THREAD DASH SIZE
6V-6868
-5
1/2
- 20
B SAE THREAD DASH SIZE
-5
B SAE THREAD SIZE (in - TPI) 1/2
L LENGTH (in) (mm)
- 20
1.14
29
JIC 37° Male / SAE Code 61 Flange - 90° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B SAE THREAD DASH SIZE
B SAE THREAD SIZE (in - TPI)
108-4371
-24
1 7/8 - 12
-24
60.3
L2
37°
A JIC THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
3.58
91
A L1
Adapters
JIC 37° Male / JIC 37° Male Bulkhead
192
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
2P-1276
-4
7/16
- 20
-4
7/16
- 20
2.09
53
7J-6419
-5
1/2
- 20
-5
1/2
- 20
2.09
53
2P-1278
-6
9/16
- 18
-6
9/16
- 18
2.17
55
137-0868
-6
9/16
- 18
-6
9/16
- 18
2.48
63
2P-1281
-8
3/4
- 16
-8
3/4
- 16
2.44
62
090-6372
-8
3/4
- 16
-8
3/4
- 16
3.94
100
2P-1282
-10
7/8
- 14
-10
7/8
- 14
2.76
70
2P-1283
-12
1
1/16
- 12
-12
1 1/16 - 12
3.11
79
2P-1284
-14
1 3/16 - 12
-14
1 3/16 - 12
3.11
79
2P-1285
-16
1 5/16 - 12
-16
1 5/16 - 12
3.15
80
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
2.76
70
JIC Adapters JIC 37° Male / JIC 37° Male Bulkhead - 45° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
7K-6462
-4
7/16
- 20
-4
7/16
- 20
0.71
18
1.54
39
137-0869
-6
9/16
- 18
-6
9/16
- 18
0.83
21
2.20
56
2P-7212
-6
9/16
- 18
-6
9/16
- 18
0.83
21
1.65
42
2P-1325
-8
3/4
- 16
-8
3/4
- 16
0.98
25
1.93
49
5P-8113
-10
7/8
- 14
-10
7/8
- 14
1.10
28
2.17
55
-12
1/16
-12
1/16
1.30
33
2.44
62
5P-4968
A JIC THREAD SIZE (in - TPI)
1
B JIC THREAD DASH SIZE
- 12
B JIC THREAD SIZE (in - TPI)
1
- 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
JIC 37° Male / JIC 37° Male Bulkhead - 90° Elbow
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
2P-7216
-4
7/16
- 20
-4
7/16
- 20
0.98
25
1.57
40
5P-2647
-5
1/2
- 20
-5
1/2
- 20
1.02
26
1.61
41
2P-7215
-6
9/16
- 18
-6
9/16
- 18
1.10
28
1.81
46
2P-2204
-8
3/4
- 16
-8
3/4
- 16
1.38
35
2.13
54
2P-1326
-10
7/8
- 14
-10
7/8
- 14
1.57
40
2.40
61
5P-3621
-12
1 1/16 - 12
-12
1 1/16 - 12
1.77
45
2.68
68
6V-1548
-12
1 1/16 - 12
-16
1 5/16 - 12
1.77
45
3.74
95
5P-1775
-16
1 5/16 - 12
-16
1 5/16 - 12
1.93
49
2.80
71
6V-1547
-16
1 5/16 - 12
-20
1 5/8 - 12
1.93
49
4.13
105
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
JIC 37° Male Bulkhead / NPTF Female
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
5P-6941
-4
7/16
- 20
-2
1/8
- 27
1.85
47
1.22
31
5P-4653
-6
9/16
- 18
-4
1/4
- 18
2.05
52
1.30
33
8T-3569
-8
3/4
- 16
-6
3/8
- 18
2.40
61
1.46
37
6V-2376
-8
3/4
- 16
-8
1/2
- 14
2.56
65
1.46
37
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
Adapters
JIC 37° Male Bulkhead / STOR Port
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
113-7696
-4
7/16
- 20
-10
7/8
- 14
2.64
67
1P-8335
-8
3/4
- 16
-8
3/4
- 16
2.52
64
L LENGTH (in) (mm)
193
JIC Adapters JIC 37° Female Swivel / NPTF Male
L A
B
PART NUMBER
A JIC THREAD DASH SIZE
140-9768
-6
A JIC THREAD SIZE (in - TPI) 9/16
- 18
B NPTF THREAD DASH SIZE
-2
B NPTF THREAD SIZE (in - TPI) 1/8
- 27
L LENGTH (in) (mm)
1.10
28
37°
JIC 37° Female Swivel / NPTF Female
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
145-8833
-4
7/16
- 20
-4
1/4
- 18
1.06
27
5P-8018
-8
3/4
- 16
-6
3/8
- 18
1.65
42
6V-2481
-8
3/4
- 16
-8
1/2
- 14
1.81
46
9S-0177
-10
7/8
- 14
-6
3/8
- 18
1.73
44
8C-8552
-10
7/8
-8
1/2
- 14
1.97
50
5T-2119
-12
1 1/16 - 12
-8
1/2
- 14
1.50
38
8C-8553
-12
1 1/16 - 12
-12
3/4
- 14
2.05
52
8C-3999
-16
1 5/16 - 12
-8
1/2
- 14
2.28
58
5P-2244
-16
1 5/16 - 12
-16
2.64
67
- 14
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
1 - 11 1/2
L LENGTH (in) (mm)
Adapters
JIC 37° Female Swivel / NPTF Female Swivel
PART NUMBER
A JIC THREAD DASH SIZE
9J-6190
-6
A JIC THREAD SIZE (in - TPI) 9/16
- 18
B NPTF THREAD DASH SIZE
-6
B NPTF THREAD SIZE (in - TPI) 3/8
- 18
L LENGTH (in) (mm)
1.61
41
JIC 37° Female Swivel / STOR Port
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
8C-8921
-16
1 5/16 - 12
-6
9/16
- 18
2.17
55
-6
9/16
- 18
2.52
64
9X-2124
194
-16
1
5/16
- 12
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
JIC Adapters JIC 37° Female Swivel / STOR Port Swivel
L
A
37°
PART NUMBER
A JIC THREAD DASH SIZE
8T-2909
-6
B
A JIC THREAD SIZE (in - TPI) 9/16
- 18
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI) 9/16
-6
L LENGTH (in) (mm)
- 18
1.54
39
JIC 37° Female Swivel / JIC 37° Female
PART NUMBER
A JIC THREAD DASH SIZE
8C-2927
-8
A JIC THREAD SIZE (in - TPI) 3/4
- 16
B JIC THREAD DASH SIZE
-8
B JIC THREAD SIZE (in - TPI) 3/4
L LENGTH (in) (mm)
- 16
1.50
38
JIC 37° Female Swivel / JIC 37° Female Swivel
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
8C-4065
-16
1 5/16 - 12
-16
1 5/16 - 12
2.01
51
8T-1486
-20
1 5/8 - 12
-20
1 5/8 - 12
1.97
50
L LENGTH (in) (mm)
NPTF Male / JIC 37° Female Swivel - 90° Elbow
5R-5708
-6
A NPTF THREAD SIZE (in - TPI) 3/8
- 18
B JIC THREAD DASH SIZE
-8
B JIC THREAD SIZE (in - TPI) 3/4
- 16
L1 LENGTH (in) (mm)
1.22
31
L2 LENGTH (in) (mm)
0.98
25
195
Adapters
PART NUMBER
A NPTF THREAD DASH SIZE
JIC Adapters STOR Boss / JIC 37° Female Swivel
PART NUMBER
A STOR THREAD DASH SIZE
161-9358
-6
9/16
- 18
-6
9/16
- 18
4.84
123
6V-8104
-6
9/16
- 18
-6
9/16
- 18
1.14
29
5I-3178
-6
9/16
- 18
-6
9/16
- 18
1.61
41
5P-4588
-6
9/16
- 18
-8
3/4
- 16
1.06
27
146-7117
-8
3/4
- 16
-8
3/4
- 16
1.89
48
1.34
34
5P-4269
A STOR THREAD SIZE (in - TPI)
-12
1
1/16
B JIC THREAD DASH SIZE
- 12
B JIC THREAD SIZE (in - TPI)
-12
1
1/16
- 12
L LENGTH (in) (mm)
STOR Boss / JIC 37° Female Swivel - 45° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
033-9216
-6
A STOR THREAD SIZE (in - TPI) 9/16
B JIC THREAD DASH SIZE
- 18
B JIC THREAD SIZE (in - TPI) 7/16
-4
- 20
L1 LENGTH (in) (mm)
1.14
29
L2 LENGTH (in) (mm)
0.55
14
STOR Boss / JIC 37° Female - 90° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
031-2716
-4
7/16
033-8129
-6
9/16
5P-9808
-8
3/4
031-0919
-12
1 1/16 - 12
-12
8K-6898
-16
1 5/16 - 12
9X-2512
-20
1 5/8 - 12
B JIC THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
7/16
- 20
1.02
26
0.98
25
- 18
-4
7/16
- 20
1.26
32
1.18
30
- 16
-8
3/4
- 16
1.46
37
1.38
35
1 1/16 - 12
1.93
49
1.73
44
-16
1 5/16 - 12
2.09
53
2.01
51
-20
1 5/8 - 12
2.24
57
1.73
44
- 20
Adapters
JIC 37° Male / JIC 37° Male / JIC 37° Male - Tee
196
PART NUMBER
A JIC THRD DASH SIZE
A JIC THRD SIZE (in - TPI)
005-5421
-4
7/16
2P-1291
-5
1/2
2P-8447
-6
4S-3652
B JIC THRD DASH SIZE
B JIC THRD SIZE (in - TPI)
C JIC THRD DASH SIZE
C JIC THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
0.91
23
0.91
23
0.91
23
- 20
-5
1/2
- 20
-5
1/2
- 20
0.94
24
0.94
24
0.94
24
9/16
- 18
-4
7/16
- 20
-4
7/16
- 20
1.06
27
1.06
27
1.06
27
-6
9/16
- 18
-6
9/16
- 18
-6
9/16
- 18
1.06
27
1.06
27
1.06
27
4S-3572
-6
9/16
- 18
-12
1.34
34
1.65
42
1.65
42
032-1270
-8
3/4
- 16
-8
3/4
003-8581
-10
7/8
-10
7/8
005-9702
-12
- 20
- 14
1 1/16 - 12
-12
1 1/16 - 12 - 16 - 14
1 1/16 - 12
-12
1 1/16 - 12
-8
3/4
- 16
1.26
32
1.26
32
1.26
32
-10
7/8
- 14
1.46
37
1.46
37
1.46
37
1.65
42
1.65
42
1.65
42
-12
1 1/16 - 12
JIC Adapters JIC 37° Male / JIC 37° Male / JIC 37° Male - Tee (continued)
PART NUMBER
A JIC THRD DASH SIZE
A JIC THRD SIZE (in - TPI)
B JIC THRD DASH SIZE
B JIC THRD SIZE (in - TPI)
C JIC THRD DASH SIZE
C JIC THRD SIZE (in -TPI)
6S-2899
-14
1 3/16 - 12
-14
1 3/16 - 12
-14
1 3/16 - 12
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
1.73
44
1.73
44
1.73
44
6K-4235
-16
1
- 12
-16
1
- 12
-16
1 5/16 - 12
1.81
46
1.81
46
1.81
46
6K-3448
-20
1 5/8 - 12
-20
1 5/8 - 12
-20
1 5/8 - 12
2.05
52
2.05
52
2.05
52
5/16
5/16
JIC 37° Male / JIC 37° Male / JIC 37° Female Swivel - Tee
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
052-0572
-4
7/16
5P-4982
-5
1/2
061-9258
-6
113-2934
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
C JIC THREAD DASH SIZE
C JIC THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
0.91
23
0.91
23
- 20
-5
1/2
- 20
-5
1/2
- 20
0.94
24
0.94
24
9/16
- 18
-6
9/16
- 18
-6
9/16
- 18
1.06
27
1.06
27
-6
9/16
- 18
-8
3/4
- 16
-8
3/4
- 16
1.18
30
1.26
32
6S-5693
-8
3/4
- 16
-8
3/4
- 16
-8
3/4
- 16
1.26
32
1.26
32
9S-0176
-10
7/8
- 14
-10
7/8
- 14
-10
7/8
- 14
1.46
37
1.46
37
7D-0978
-12
1 1/16 - 12
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
1.65
42
5P-4984
-14
1 3/16 - 12
-14
1 3/16 - 12
-14
1 3/16 - 12
1.73
44
1.73
44
5P-2242
-16
1 5/16 - 12
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
1.81
46
5P-4983
-20
1 5/8 - 12
-20
1 5/8 - 12
-20
1 5/8 - 12
2.05
52
2.05
52
- 20
JIC 37° Male / JIC 37° Male / NPTF Male - Tee
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
9S-7695
-4
7/16
- 20
-4
7/16
- 20
0.91
23
0.91
23
6S-2365
-6
9/16
- 18
-6
9/16
- 18
1.22
31
1.22
31
6S-2289
-6
9/16
- 18
-6
9/16
- 18
1.06
27
1.06
27
9X-2623
-6
9/16
- 18
-6
9/16
- 18
1.14
29
1.14
29
5P-4495
-8
3/4
- 16
-8
3/4
- 16
1.26
32
1.26
32
001-6842
-8
3/4
- 16
-8
3/4
- 16
1.34
34
1.34
34
8T-2864
-10
7/8
- 14
-10
7/8
- 14
1.46
37
1.46
37
006-0315
-12
1 1/16 - 12
-12
1 1/16 - 12
1.65
42
1.65
42
6K-8748
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
1.06
27
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
Adapters
197
JIC Adapters JIC 37° Male / JIC 37° Male / STOR Boss - Tee L2
L3
PART NUMBER
A JIC THRD DASH SIZE
104-9200
-4
7/16
030-7957
-4
7/16
5P-2191
-4
031-6281 104-9114
C 37° L1
B
A
A JIC THRD SIZE (in - TPI)
B JIC THRD DASH SIZE
B JIC THRD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
0.91
23
0.91
23
2.36
60
- 20
-4
7/16
- 20
-4
7/16
- 20
0.91
23
0.91
23
1.02
26
7/16
- 20
-8
3/4
- 16
-8
3/4
- 16
0.98
25
1.26
32
1.46
37
-5
1/2
- 20
-5
1/2
- 20
-5
1/2
- 20
0.94
24
0.94
24
1.10
28
-6
9/16
- 18
-4
7/16
- 20
-8
3/4
- 16
1.06
27
0.87
22
1.61
41
126-9746
-6
9/16
- 18
-4
7/16
- 20
-10
7/8
- 14
1.06
27
0.91
23
1.50
38
6M-6853
-6
9/16
- 18
-6
9/16
- 18
-6
9/16
- 18
1.06
27
1.06
27
1.26
32
2P-8098
-6
9/16
- 18
-6
7/16
- 20
-6
9/16
- 18
1.06
27
1.06
27
1.18
30
115-8730
-8
3/4
- 16
-6
9/16
- 18
-8
3/4
- 16
1.26
32
1.14
29
1.46
37
030-7959
-8
3/4
- 16
-8
3/4
- 16
-8
3/4
- 16
1.26
32
1.26
32
1.46
37
119-2604
-8
3/4
- 16
-8
3/4
- 16
-10
7/8
- 14
1.26
32
1.26
32
1.69
43
031-4136
-10
7/8
- 14
-10
7/8
- 14
-10
7/8
- 14
1.46
37
1.46
37
1.69
43
2P-7211
-12
1.65
42
1.65
42
1.93
49
- 20
1 1/16 - 12 5/16
-12
1 1/16 - 12 1/16
-12
1 1/16 - 12 3/16
121-9267
-16
1
- 12
-12
1
- 12
-14
1
- 12
1.81
46
1.65
42
2.05
52
030-7960
-16
1 5/16 - 12
-16
1 5/16 - 12
-16
1 5/16 - 12
1.81
46
1.81
46
2.05
52
JIC 37° Male / JIC 37° Male / STOR Port - Tee
PART NUMBER
A JIC THRD DASH SIZE
5P-1272
-4
A JIC THRD SIZE (in - TPI) 7/16
- 20
B JIC THRD DASH SIZE
-4
B JIC THRD SIZE (in - TPI) 7/16
- 20
C STOR THRD DASH SIZE
-4
C STOR THRD SIZE (in -TPI) 7/16
- 20
L LENGTH (in) (mm)
1.06
27
L2 LENGTH (in) (mm)
1.06
27
L3 LENGTH (in) (mm)
1.22
31
Adapters
JIC 37° Male / JIC 37° Male Bulkhead / JIC 37° Male - Tee
198
PART NUMBER
A JIC THRD DASH SIZE
A JIC THRD SIZE (in - TPI)
8T-3300
-4
7/16
6V-5535
-6
9/16
2P-8130
-8
3/4
5P-7154
-12
B JIC THRD DASH SIZE
B JIC THRD SIZE (in - TPI)
C JIC THRD DASH SIZE
C JIC THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
0.98
25
1.57
40
0.91
23
- 18
-6
9/16
- 18
-6
9/16
- 18
1.10
28
1.81
46
1.06
27
- 16
-8
3/4
- 16
-8
3/4
- 16
1.38
35
2.13
54
1.26
32
1.77
45
2.68
68
1.73
44
- 20
1 1/16 - 12
-12
1 1/16 - 12
-12
1 1/16 - 12
JIC Adapters JIC 37° Male / STOR Boss / NPTF Female - Tee
PART NUMBER
A JIC THRD DASH SIZE
5P-4375
-6
A JIC THRD SIZE (in - TPI) 9/16
- 18
B STOR THRD DASH SIZE
B STOR THRD SIZE (in - TPI) 9/16
-6
C NPTF THRD DASH SIZE
- 18
-2
C NPTF THRD SIZE (in -TPI) 1/8
L LENGTH (in) (mm)
- 27
1.06
27
L2 LENGTH (in) (mm)
1.26
32
L3 LENGTH (in) (mm)
0.43
11
JIC 37° Male Bulkhead / JIC 37° Male / JIC 37° Male - Tee
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
0A-3732
-4
7/16
2P-9376
-6
9/16
061-8408
-8
061-7738
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
C JIC THREAD DASH SIZE
C JIC THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
1.57
40
0.98
25
- 18
-6
9/16
- 18
-6
9/16
- 18
1.81
46
1.10
28
3/4
- 16
-8
3/4
- 16
-8
3/4
- 16
2.13
54
1.38
35
-10
7/8
- 14
-10
7/8
- 14
-10
7/8
- 14
2.40
61
1.57
40
061-8827
-12
1
1/16
- 12
-12
1
1/16
- 12
-12
1
1/16
- 12
2.68
68
1.77
45
053-2928
-16
1 5/16 - 12
-16
1 5/16 - 12
-16
1 5/16 - 12
2.80
71
1.93
49
- 20
JIC 37° Female Swivel / JIC 37° Male / JIC 37° Male - Tee
PART NUMBER
A JIC THREAD DASH SIZE
A JIC THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
2N-8142
-4
7/16
053-0700
-6
9/16
5P-3166
-8
3/4
061-8284
-10
7/8
- 14
5P-3165
-12
1 1/16 - 12
-12
1 1/16 - 12
-12
5P-0788
-14
1 3/16 - 12
-14
1 3/16 - 12
5P-4494
-16
1 5/16 - 12
-16
1 5/16 - 12
-4
7/16
- 18
-6
9/16
- 16
-8
3/4
-10
7/8
- 14
- 20
C JIC THREAD DASH SIZE
C JIC THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
7/16
- 20
0.98
25
0.91
23
- 18
-6
9/16
- 18
1.26
32
1.06
27
- 16
-8
3/4
- 16
1.38
35
1.26
32
-10
7/8
- 14
1.61
41
1.46
37
1 1/16 - 12
1.73
44
1.65
42
-14
1 3/16 - 12
1.77
45
1.73
44
-16
1 5/16 - 12
2.01
51
1.81
46
- 20
Adapters
NPTF Male / JIC 37° Male / JIC 37° Male - Tee
PART NUMBER
A NPTF THRD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
8D-0071
-2
1/8
7K-4128
-4
1/4
8J-1040
-6
001-6300 061-8260
B JIC THRD DASH SIZE
B JIC THREAD SIZE (in - TPI)
C JIC THRD DASH SIZE
C JIC THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
0.79
20
0.91
23
0.91
23
- 18
-6
9/16
- 18
-6
9/16
- 18
1.10
28
1.06
27
1.06
27
3/8
- 18
-8
3/4
- 16
-8
3/4
- 16
1.22
31
1.26
32
1.26
32
-8
1/2
- 14
-8
3/4
- 16
-8
3/4
- 16
1.46
37
1.26
32
1.26
32
-8
1/2
- 14
-10
7/8
- 14
-10
7/8
- 14
1.46
37
1.46
37
1.46
37
061-8261
-12
3/4
-12
1
1/16
- 12
-12
1
1/16
- 12
1.57
40
1.65
42
1.65
42
6K-3449
-16
-16
1 5/16 - 12
-16
1 5/16 - 12
1.97
50
1.81
46
1.81
46
- 27
- 14
1 - 11 1/2
199
JIC Adapters NPTF Male / JIC 37° Male / STOR Port - Tee
PART NUMBER
A NPTF THRD DASH SIZE
5P-1271
-2
A NPTF THREAD SIZE (in - TPI) 1/8
- 27
B JIC THRD DASH SIZE
-4
B JIC THREAD SIZE (in - TPI) 7/16
- 20
C STOR THRD DASH SIZE
-4
C STOR THREAD SIZE (in -TPI) 7/16
- 20
L1 LENGTH (in) (mm)
0.87
22
L2 LENGTH (in) (mm)
1.06
27
L3 LENGTH (in) (mm)
1.22
31
NPTF Female / JIC 37° Male / STOR Boss - Tee
PART NUMBER
A NPTF THRD DASH SIZE
6V-3297
-4
1/4
-8
1/2
6V-9039
A NPTF THREAD SIZE (in - TPI)
- 18 - 14
B JIC THRD DASH SIZE
-6 -12
B JIC THREAD SIZE (in - TPI) 9/16
1
- 18
1/16
- 12
C STOR THRD DASH SIZE
-6 -12
C STOR THREAD SIZE (in -TPI) 9/16
- 18
1 1/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
0.87
22
1.22
31
1.26
32
1.26
32
1.65
42
1.93
49
Adapters
STOR Boss / JIC 37° Male / JIC 37° Male - Tee
200
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
4S-4857
-4
7/16
- 20
-4
7/16
- 20
-4
7/16
- 20
1.02
26
0.91
23
0.91
23
031-5894
-5
1/2
- 20
-5
1/2
- 20
-5
1/2
- 20
1.10
28
0.94
24
0.94
24
005-9129
-6
9/16
- 18
-4
7/16
- 20
-4
7/16
- 20
1.26
32
0.91
23
0.91
23
030-7955
-6
9/16
- 18
-6
9/16
- 18
-6
9/16
- 18
1.26
32
1.06
27
1.06
27
031-2582
-8
3/4
- 16
-6
9/16
- 18
-6
9/16
- 18
1.46
37
1.14
29
1.14
29
4S-4869
-8
3/4
- 16
-8
3/4
- 16
-8
3/4
- 16
1.46
37
1.26
32
1.26
32
155-0490
-8
3/4
- 16
-12
1.77
45
1.61
41
1.61
41
2P-1296
-10
7/8
- 14
-10
1.69
43
1.46
37
1.46
37
2P-1297
-12
1 1/16 - 12
-12
1 1/16 - 12
-12
1 1/16 - 12
1.93
49
1.65
42
1.65
42
2P-1298
-14
1 3/16 - 12
-14
1 3/16 - 12
-14
1 3/16 - 12
2.01
51
1.73
44
1.73
44
8K-3520
-16
1 5/16 - 12
-12
1 1/16 - 12
-12
1 1/16 - 12
2.05
52
1.77
45
1.77
45
5/16
B JIC THRD DASH SIZE
B JIC THREAD SIZE (in - TPI)
1 1/16 - 12 7/8
- 14
5/16
C JIC THRD DASH SIZE
-12
C JIC THREAD SIZE (in -TPI)
1 1/16 - 12 7/8
-10
- 14
5/16
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
067-9921
-16
1
- 12
-16
1
- 12
-16
1
- 12
2.05
52
1.81
46
1.81
46
9X-2511
-16
1 5/16 - 12
-20
1 5/8 - 12
-24
1 7/8 - 12
2.40
61
2.20
56
2.32
59
6V-7485
-20
1 5/8 - 12
-20
1 5/8 - 12
-20
1 5/8 - 12
2.24
57
2.05
52
2.05
52
JIC Adapters STOR Boss / JIC 37° Male / JIC 37° Female Swivel - Tee
PART NUMBER
A STOR THRD DASH SIZE
1U-5263
-8
3/4
-8
3/4
1U-5264
A STOR THREAD SIZE (in - TPI)
- 16 - 16
B JIC THRD DASH SIZE
B JIC THREAD SIZE (in - TPI) 3/4
-8 -16
1
- 16
5/16
- 12
C JIC THRD DASH SIZE
-8 -16
C JIC THREAD SIZE (in -TPI) 3/4
- 16
1 5/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
1.46
37
1.26
32
1.38
35
1.81
46
1.81
46
2.01
51
STOR Port / JIC 37° Male / JIC 37° Female Swivel - Tee
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
111-6690
-4
7/16
0.71
18
1.06
27
1.06
27
8T-0163
-6
9/16
- 18
-16
1
- 12
-16
1 5/16 - 12
1.10
28
1.81
46
2.01
51
8T-0637
-6
9/16
- 18
-20
1 5/8 - 12
-20
1 5/8 - 12
1.10
28
2.05
52
2.32
59
5G-2740
-8
3/4
- 16
-12
1 1/16 - 12
-12
1 1/16 - 12
1.46
37
1.65
42
1.73
44
- 20
B JIC THRD DASH SIZE
-4
B JIC THREAD SIZE (in - TPI) 7/16
- 20
5/16
C JIC THRD DASH SIZE
-4
C JIC THREAD SIZE (in -TPI) 7/16
- 20
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
STOR Boss / JIC 37° Male / NPTF Female - Tee
PART NUMBER
A STOR THRD DASH SIZE
120-8401
-8
A STOR THREAD SIZE (in - TPI) 3/4
- 16
B JIC THRD DASH SIZE
-8
B JIC THREAD SIZE (in - TPI) 3/4
- 16
C NPTF THRD DASH SIZE
-8
C NPTF THREAD SIZE (in -TPI) 1/2
- 14
L1 LENGTH (in) (mm)
1.61
41
L2 LENGTH (in) (mm)
1.42
36
L3 LENGTH (in) (mm)
1.22
31
STOR Boss / JIC 37° Male / STOR Boss - Tee
8T-2543
-5
A STOR THREAD SIZE (in - TPI) 1/2
- 20
B JIC THRD DASH SIZE
-5
B JIC THREAD SIZE (in - TPI) 1/2
- 20
C STOR THRD DASH SIZE
-5
C STOR THREAD SIZE (in -TPI) 1/2
- 20
L1 LENGTH (in) (mm)
1.10
28
L2 LENGTH (in) (mm)
0.94
24
L3 LENGTH (in) (mm)
0.79
20
201
Adapters
PART NUMBER
A STOR THRD DASH SIZE
JIC Adapters STOR Port / JIC 37° Male / STOR Boss - Tee
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
6V-6967
-5
1/2
8C-2948
-6
9/16
5P-0220
-12
- 20 - 18
1 1/16 - 12
B JIC THRD DASH SIZE
B JIC THREAD SIZE (in - TPI)
-6
9/16
-6
9/16
C STOR THRD DASH SIZE
- 18 - 18
1 5/16 - 12
-16
C STOR THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-5
1/2
- 20
1.10
28
1.06
27
1.18
30
-6
9/16
- 18
0.91
23
1.22
31
1.42
36
1.50
38
1.81
46
2.05
52
-16
1 5/16 - 12
STOR Port / STOR Port / JIC 37° Female Swivel - Tee
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
5I-4075
-4
7/16
5I-4015
-4
7/16
5I-3190
-6
9/16
B STOR THRD DASH SIZE
B STOR THREAD SIZE (in - TPI)
C JIC THRD DASH SIZE
C JIC THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
-4
7/16
- 20
0.67
17
0.59
15
1.18
30
- 20
-6
9/16
- 18
-6
9/16
- 18
0.79
20
0.59
15
1.22
31
- 18
-6
9/16
- 18
-6
9/16
- 18
1.10
28
0.59
15
1.22
31
- 20
JIC 37° Male / JIC 37° Male / JIC 37° Male / JIC 37° Female Swivel - Cross
PART NUMBER
A-D JIC THREAD DASH SIZE
3E-2344
-10
A-D JIC THREAD SIZE (in - TPI) 7/8
- 14
L1 LENGTH (in) (mm)
1.46
37
L2 LENGTH (in) (mm)
1.46
37
L3 LENGTH (in) (mm)
1.46
37
L4 LENGTH (in) (mm)
1.61
41
Adapters
JIC 37° Male / JIC 37° Male / NPTF Male / NPTF Male - Cross
202
PART NUMBER
A-B JIC THREAD DASH SIZE
5P-9431
-8
A-B JIC THREAD SIZE (in - TPI) 3/4
- 16
C-D NPTF THREAD DASH SIZE
-6
C-D NPTF THREAD SIZE (in - TPI) 3/8
- 18
L1 LENGTH (in) (mm)
1.26
32
L2 LENGTH (in) (mm)
1.22
31
L3 LENGTH (in) (mm)
1.26
32
L4 LENGTH (in) (mm)
1.22
31
JIC Adapters JIC 37° Male / JIC 37° Male / JIC 37° Male / JIC 37° Male Cross
PART NUMBER
A -D JIC THREAD DASH SIZE
A-D JIC THREAD SIZE (in - TPI)
6S-2231
-6
9/16
- 18
1.06
27
7J-6742
-8
3/4
- 16
1.26
32
5P-5613
-12
1 1/16 - 12
1.65
42
8C-4066
-16
1 5/16 - 12
1.81
46
5P-2210
-20
1 5/8 - 12
2.05
52
L LENGTH (in) (mm)
Adapters
203
ORFS Adapters ORFS Male / ORFS Male
L
B
A
L-2
A
Adapters
B
6V-8729
-4
9/16
6V-8736
-4
9/16
107-6631
-6
6V-8730 6V-8737
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-4
9/16
- 18
1.10
28
- 18
-6
11/16
- 16
1.18
30
11/16
- 16
-4
9/16
- 18
1.18
30
-6
11/16
- 16
-6
11/16
- 16
1.22
31
-6
11/16
- 16
-8
13/16
- 16
1.34
34
6V-8731
-8
13/16
- 16
-8
13/16
- 16
1.38
35
6V-8738
-8
13/16
- 16
-10
1 - 14
1.57
40
8T-5082
-8
13/16
- 16
-12
1 3/16 - 12
1.69
43
6V-8732
-10
1 - 14
-10
1 - 14
1.69
43
6V-8739
-10
1 - 14
-12
1 3/16 - 12
1.81
46
6V-8733
-12
1 3/16 - 12
-12
1 3/16 - 12
1.85
47
6V-8740
-12
1 3/16 - 12
-16
1 7/16 - 12
1.93
49
6V-8734
-16
1 7/16 - 12
-16
1 7/16 - 12
1.93
49
- 18
11/16
7/16
6V-8741
-20
1
- 12
-16
1
- 12
2.01
51
109-5289
-20
1 11/16 - 12
-20
1 11/16 - 12
2.01
51
110-9160
-20
1 11/16 - 12
-20
1 11/16 - 12
2.76
70
PART NUMBER
A ORFS THREAD DASH SIZE
6V-9806
-4
9/16
6V-9807
-6
11/16
6V-9808
-8
13/16
6V-9809
-10
1 - 14
-10
6V-9810
-12
1 3/16 - 12
8T-6777
-16
6V-9649
-16
A ORFS THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
9/16
- 18
0.87
22
0.87
22
- 16
-6
11/16
- 16
0.98
25
0.98
25
- 16
-8
13/16
- 16
1.10
28
1.10
28
1 - 14
1.30
33
1.30
33
-12
1 3/16 - 12
1.46
37
1.46
37
1 7/16 - 12
-12
1 3/16 - 12
1.65
42
1.61
41
1 7/16 - 12
-16
1 7/16 - 12
1.65
42
1.65
42
- 18
ORFS Male / ORFS Female Swivel - 45° Elbow
L-1
PART NUMBER
A ORFS THREAD DASH SIZE
8C-8408
-4
9/16
8C-8988
-6
11/16
8C-8989
-8
13/16
8C-7563
-10
1 - 14
114-8196
-12
1
3/16
8T-8899
-12
142-0038
-16
1 7/16 - 12
L-2
B
204
A ORFS THREAD SIZE (in - TPI)
ORFS Male / ORFS Male - 90° Elbow
L-1
A
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
9/16
- 18
0.63
16
0.94
24
- 16
-6
11/16
- 16
0.75
19
1.06
27
- 16
-8
13/16
- 16
0.79
20
1.42
36
- 18
-10
1 - 14
0.91
23
1.54
39
- 12
-12
1
3/16
- 12
1.06
27
1.34
34
1 3/16 - 12
-12
1 3/16 - 12
1.02
26
1.65
42
-16
1 7/16 - 12
1.18
30
1.89
48
ORFS Adapters ORFS Male / ORFS Female Swivel - 90° Elbow
PART NUMBER
A ORFS THREAD DASH SIZE
6V-9849
-4
9/16
089-7920
-6
11/16
6V-9850
-6
152-3411 3E-2333
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
9/16
- 18
0.87
22
1.02
26
- 16
-6
11/16
- 16
0.98
25
3.27
83
11/16
- 16
-6
11/16
- 16
0.98
25
1.14
29
-6
11/16
- 16
-8
13/16
- 16
1.10
28
1.50
38
-8
13/16
- 16
-6
11/16
- 16
1.10
28
1.50
38
6V-9851
-8
13/16
-8
13/16
- 16
1.10
28
1.50
38
157-2348
-10
1 - 14
-8
13/16
- 16
1.30
33
1.50
38
6V-9852
-10
1 - 14
-10
1 - 14
1.30
33
1.61
41
111-6522
-10
1 - 14
-10
1 - 14
1.30
33
1.61
41
137-9077
-10
1 - 14
-10
1 - 14
3.54
90
1.10
28
8C-8762
-12
1 3/16 - 12
-8
1.46
37
1.65
42
8T-1718
-12
1 3/16 - 12
-10
1 - 14
1.46
37
1.77
45
6V-9853
-12
1 3/16 - 12
-12
1 3/16 - 12
1.46
37
1.81
46
- 18
3/16
- 16
13/16
3/16
- 16
103-1328
-12
1
- 12
-12
1
- 12
1.77
45
1.42
36
109-5825
-12
1 3/16 - 12
-12
1 3/16 - 12
1.42
36
1.65
42
109-5824
-12
1 3/16 - 12
-12
1 3/16 - 12
1.42
36
1.42
36
6V-9854
-16
1 7/16 - 12
-16
1 7/16 - 12
1.65
42
2.09
53
6V-9855
-20
1 11/16 - 12
-20
1 11/16 - 12
1.77
45
2.28
58
102-3437
-24
2 - 12
-20
1 11/16 - 12
1.93
49
2.40
61
ORFS Male / ORFS Female Swivel - Loose Nut
L
PART NUMBER
A ORFS THREAD DASH SIZE
6V-8935
-4
9/16
- 18
-8
0.87
22 6V-8554
6V-8937
-4
9/16
- 18
-10
1 - 14
0.91
23 6V-8555
6V-8940
-4
9/16
- 18
-12
1 3/16 - 12
0.98
25 6V-8556
6V-8938
-6
11/16
- 16
-10
1 - 14
0.94
24 6V-8555
6V-8941
-6
11/16
- 16
-12
1 3/16 - 12
1.02
26 6V-8556
6V-8939
-8
13/16
- 16
-10
1 - 14
1.02
26 6V-8555
6V-8942
-8
13/16
- 16
-12
1 3/16 - 12
1.10
28 6V-8556
6V-8944
-8
13/16
- 16
-16
1 7/16 - 12
1.14
29 6V-8557
6V-8945
-10
1 - 14
-16
1 7/16 - 12
1.26
32 6V-8557
6V-8947
-12
1 3/16 - 12
-20
1 11/16 - 12
1.34
34 6V-8558
8T-7946
-16
1 7/16 - 12
-24
2 - 12
1.34
34 8T-1681
8T-8552
-20
1 11/16 - 12
-24
2 - 12
1.34
34 8T-1681
B A
A ORFS THREAD SIZE (in - TPI)
A ORFS THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI) 13/16
- 16
L NUT LENGTH PART (in) (mm) NUMBER
Adapters
205
ORFS Adapters ORFS Male / ORFS Female Swivel - Captive Nut
L
B A
PART NUMBER
A ORFS THREAD DASH SIZE
6V-8934
-4
9/16
- 18
-6
11/16
- 16
1.18
30
6V-8936
-6
11/16
- 16
-8
13/16
- 16
0.87
22
3E-7403
-8
13/16
- 16
-6
11/16
- 16
1.61
41
6V-8943
-10
1 - 14
-12
1 3/16 - 12
1.18
30
6V-8946
-12
1 3/16 - 12
-16
1 7/16 - 12
1.30
33
1.42
36
6V-8948
-16
A ORFS THREAD SIZE (in - TPI)
1
7/16
- 12
B ORFS THREAD DASH SIZE
-20
B ORFS THREAD SIZE (in - TPI)
1
11/16
- 12
L LENGTH (in) (mm)
ORFS Male / ORFS Female Swivel - 90° Elbow (Trapezoidal) A ORFS THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
7I-7413
-12
1 3/16 - 12
-12
1 3/16 - 12
1.42
36
1.81
46
7I-7412
-12
1 3/16 - 12
-12
1 3/16 - 12
1.42
36
1.42
36
L1 LENGTH (in) (mm)
ORFS Male / JIC 37° Male
L
B
A
PART NUMBER
A ORFS THREAD DASH SIZE
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
107-3877
-6
11/16
8C-7306
-8
13/16
8C-7307
-10
1 - 14
8C-7308
-12
1 3/16 - 12
-12
6C-2293
-12
1 3/16 - 12
- 16 - 16
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-6
9/16
- 18
1.34
34
-8
3/4
- 16
1.54
39
-10
7/8
- 14
1.81
46
1 1/16 - 12
2.05
52
-12
1 1/16 - 12
1.85
47
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
ORFS Male / JIC 37° Female Adapters
L
PART NUMBER
A ORFS THREAD DASH SIZE
8T-6701
-4
37°
A
206
B
A ORFS THREAD SIZE (in - TPI) 9/16
- 18
-4
7/16
- 20
L LENGTH (in) (mm)
0.94
24
L2 LENGTH (in) (mm)
ORFS Adapters ORFS Male / JIC 37° Female Swivel
A
B
PART NUMBER
A ORFS THREAD DASH SIZE
112-2565
-8
A ORFS THREAD SIZE (in - TPI) 13/16
- 16
B JIC THREAD DASH SIZE
-8
B JIC THREAD SIZE (in - TPI) 3/4
- 16
L LENGTH (in) (mm)
1.34
34
L
ORFS Male / NPTF Male L
B A
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
8C-6865
-4
9/16
- 18
-2
1/8
- 27
1.02
26
8C-6866
-4
9/16
- 18
-4
1/4
- 18
1.26
32
8C-6867
-4
9/16
- 18
-6
3/8
- 18
1.26
32
101-0387
-6
11/16
- 16
-2
1/8
- 27
1.14
29
8C-6868
-6
11/16
- 16
-4
1/4
- 18
1.30
33
8C-6869
-6
11/16
- 16
-6
3/8
- 18
1.30
33
2T-2416
-6
11/16
- 16
-6
3/8
- 18
1.38
35
8C-6870
-6
11/16
- 16
-8
1/2
- 14
1.54
39
8C-6871
-8
13/16
- 16
-6
3/8
- 18
1.38
35
8C-6872
-8
13/16
- 16
-8
1/2
- 14
1.61
41
150-7158
-10
1 - 14
-6
3/8
- 18
1.57
40
8C-6873
-10
1 - 14
-8
1/2
- 14
1.73
44
8C-6874
-12
1
3/16
- 12
-12
3/4
- 14
1.85
47
8C-6875
-16
1 7/16 - 12
-16
2.05
52
150-7159
-20
1 11/16 - 12
-8
2.13
54
117-3050
-20
1 11/16 - 12
-16
2.13
54
1 - 11 1/2 1/2
- 14
1 - 11 1/2
L LENGTH (in) (mm)
ORFS Male / NPTF Male - 45° Elbow A ORFS THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
152-0199
-6
11/16
- 16
-4
1/4
- 18
0.75
19
1.06
27
2T-2171
-8
13/16
- 16
-6
3/8
- 18
0.79
20
0.98
25
3E-7449
-8
13/16
- 16
-8
1/2
- 14
0.83
21
1.22
31
117-3034
-20
1 11/16 - 12
-16
1 - 11 1/2
1.26
32
2.13
54
123-5934
-20
1 11/16 - 12
-20
1 1/4 - 11 1/2
1.26
32
1.69
43
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
207
Adapters
PART NUMBER
A ORFS THREAD DASH SIZE
ORFS Adapters ORFS Male / NPTF Male - 90° Elbow
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
7X-0492
-4
9/16
- 18
-2
1/8
- 27
0.87
22
0.79
20
7X-5331
-4
9/16
- 18
-4
1/4
- 18
0.91
23
1.06
27
2T-2305
-6
11/16
- 16
-4
1/4
- 18
0.98
25
1.10
28
2T-1925
-6
11/16
- 16
-6
3/8
- 18
1.02
26
1.26
32
2T-2170
-6
11/16
- 16
-8
1/2
- 14
1.14
29
1.50
38
2T-2396
-8
13/16
- 16
-6
3/8
- 18
1.10
28
1.26
32
2T-1922
-8
13/16
- 16
-8
1/2
- 14
1.22
31
1.54
39
122-8905
-8
13/16
- 16
-12
3/4
- 14
1.34
34
1.65
42
117-3033
-10
1 - 14
-12
3/4
- 14
1.30
33
1.57
40
7X-7902
-12
1 3/16 - 12
-8
1/2
- 14
1.46
37
1.65
42
9X-2398
-12
1 3/16 - 12
-12
3/4
- 14
1.46
37
1.57
40
131-4863
-16
1 7/16 - 12
-16
1.65
42
1.97
50
1 - 11 1/2
L1 LENGTH (in) (mm)
ORFS Male / NPTF Female
PART NUMBER
A ORFS THREAD DASH SIZE
8T-4128
-4
9/16
- 18
-2
1/8
- 27
0.67
17
8T-6776
-4
9/16
- 18
-4
1/4
- 18
1.38
35
7X-7934
-6
11/16
- 16
-4
1/4
- 18
1.42
36
7X-2441
-6
11/16
- 16
-6
3/8
- 18
1.42
36
-6
3/8
- 18
1.14
29
B
A L
6L-7611
Adapters
A
B
L
208
-10
A ORFS THREAD SIZE (in - TPI)
1 - 14
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
ORFS Male / STOR Boss
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
081-5622
-4
9/16
- 18
-3
3/8
- 24
1.06
27
6V-8647
-4
9/16
- 18
-4
7/16
- 20
1.14
29
128-6085
-4
9/16
- 18
-4
7/16
- 20
1.14
29
7I-8663
-4
9/16
- 18
-4
7/16
- 20
1.81
46
6V-9010
-4
9/16
- 18
-4
7/16
- 20
2.40
61
8T-6988
-4
9/16
- 18
-5
1/2
- 20
1.14
29
143-7685
-4
9/16
- 18
-6
9/16
- 18
1.10
28
6V-8641
-4
9/16
- 18
-6
9/16
- 18
1.18
30
142-9219
-4
9/16
- 18
-6
9/16
- 18
1.22
31
145-2237
-4
9/16
- 18
-6
9/16
- 18
1.85
47
9T-5466
-4
9/16
- 18
-6
9/16
- 18
4.37
111
112-9783
-4
9/16
- 18
-8
3/4
- 16
1.34
34
6V-9872
-6
11/16
- 16
-4
7/16
- 20
1.34
34
122-9415
-6
11/16
- 16
-5
1/2
- 20
1.10
28
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
ORFS Adapters A
B
L
ORFS Male / STOR Boss (continued)
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
8T-5043
-6
11/16
8T-9041
-6
11/16
122-0020
-6
6V-8636 7E-9898
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
1/2
- 20
1.22
31
- 16
-6
9/16
- 18
1.18
30
11/16
- 16
-6
9/16
- 18
1.26
32
-6
11/16
- 16
-6
9/16
- 18
1.26
32
-6
11/16
- 16
-6
9/16
- 18
1.57
40
8T-1779
-6
11/16
- 16
-6
9/16
- 18
1.77
45
8T-0075
-6
11/16
- 16
-6
9/16
- 18
1.97
50
175-0515
-6
11/16
- 16
-6
9/16
- 18
2.05
52
9X-2297
-6
11/16
- 16
-6
9/16
- 18
2.44
62
136-1902
-6
11/16
- 16
-6
9/16
- 18
2.76
70
166-3032
-6
11/16
- 16
-6
9/16
- 18
2.80
71
136-1901
-6
11/16
- 16
-6
9/16
- 18
3.03
77
8T-8887
-6
11/16
- 16
-6
9/16
- 18
3.27
83
152-9349
-6
11/16
- 16
-6
9/16
- 18
3.54
90
168-9352
-6
11/16
- 16
-8
3/4
- 16
1.34
34
6V-8634
-6
11/16
- 16
-8
3/4
- 16
1.38
35
8T-0076
-6
11/16
- 16
-8
3/4
- 16
2.13
54
092-3635
-6
11/16
- 16
-8
3/4
- 16
2.64
67
6V-8715
-6
11/16
- 16
-10
7/8
- 14
1.57
40
168-8767
-6
11/16
- 16
-10
7/8
- 14
1.57
40
9X-6550
-6
11/16
- 16
-10
7/8
- 14
2.17
55
131-0749
-8
13/16
- 16
-6
9/16
- 18
1.42
36
6V-9873
-8
13/16
- 16
-6
9/16
- 18
1.46
37
141-7251
-8
13/16
- 16
-6
9/16
- 18
1.50
38
8T-5050
-8
13/16
- 16
-6
9/16
- 18
2.60
66
149-1301
-8
13/16
- 16
-6
9/16
- 18
2.68
68
6V-8639
-8
13/16
- 16
-8
3/4
- 16
1.46
37
8T-1687
-8
13/16
- 16
-8
3/4
- 16
2.05
52
8T-0077
-8
13/16
- 16
-8
3/4
- 16
2.68
68
123-1904
-8
13/16
- 16
-8
3/4
- 16
2.99
76
9X-2304
-8
13/16
- 16
-8
3/4
- 16
4.49
114
8U-1675
-8
13/16
- 16
-8
3/4
- 16
4.53
115
132-6829
-8
13/16
- 16
-10
7/8
- 14
1.46
37
6V-8638
-8
13/16
- 16
-10
7/8
- 14
1.57
40
5I-4370
-8
13/16
- 16
-10
7/8
- 14
2.01
51
104-9054
-8
13/16
- 16
-10
7/8
- 14
2.83
72
126-9903
-8
13/16
- 16
-10
7/8
- 14
3.27
83
126-9745
-8
13/16
- 16
-10
7/8
- 14
4.65
118
6V-8633
-8
13/16
- 16
-12
1 1/16 - 12
1.73
44
8T-7968
-8
13/16
- 16
-12
1 1/16 - 12
2.40
61
4I-7745
-8
13/16
- 16
-12
1 1/16 - 12
6.46
164
9T-2136
-8
13/16
- 16
-14
1 3/16 - 12
1.73
44
9X-8408
-8
13/16
- 16
-16
1 5/16 - 12
1.81
46
8T-0405
-10
1 - 14
-5
1/2
- 20
1.61
41
8C-6758
-10
1 - 14
-6
9/16
- 18
1.65
42
- 16
1.69
43
- 16
1.77
45
127-9258
-10
1 - 14
-8
3/4
6V-8632
-10
1 - 14
-8
3/4
Adapters
-5
- 16
209
ORFS Adapters A
B
Adapters
L
210
ORFS Male / STOR Boss (continued)
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
156-9791
-10
1 - 14
-8
3/4
- 16
2.95
75
6V-8642
-10
1 - 14
-10
7/8
- 14
1.69
43
108-7185
-10
1 - 14
-10
7/8
- 14
2.09
53
144-7767
-10
1 - 14
-10
7/8
- 14
2.28
58
8T-1576
-10
1 - 14
-10
7/8
- 14
2.99
76
- 14
3.50
89
- 14
4.06
103 47
L LENGTH (in) (mm)
125-7234
-10
1 - 14
-10
7/8
125-1836
-10
1 - 14
-10
7/8
6V-8713
-10
1 - 14
-12
1 1/16 - 12
1.85
4I-8984
-10
1 - 14
-12
1 1/16 - 12
3.50
89
125-7425
-10
1 - 14
-12
1 1/16 - 12
5.55
141
109-5822
-10
1 - 14
-12
1 1/16 - 12
7.44
189
7I-1055
-10
1 - 14
-12
1 1/16 - 12
8.62
219
125-1915
-10
1 - 14
-16
1 5/16 - 12
1.77
45
138-7538
-10
1 - 14
-16
1.81
46
6V-9874
-12
1 3/16 - 12
-8
3/4
- 16
1.93
49
108-7264
-12
1 3/16 - 12
-10
7/8
- 14
2.01
51
6V-8640
-12
1 3/16 - 12
-10
7/8
- 14
2.01
51
113-2376
-12
1 3/16 - 12
-10
7/8
- 14
2.01
51
3E-7420
-12
1 3/16 - 12
-10
7/8
- 14
3.94
100
132-8815
-12
1 3/16 - 12
-10
7/8
- 14
5.08
129
9X-6656
-12
1 3/16 - 12
-10
7/8
- 14
5.16
131
1/16
3/16
1
5/16
- 12
128-6842
-12
1
- 12
-12
1
- 12
1.77
45
6V-8637
-12
1 3/16 - 12
-12
1 1/16 - 12
1.93
49
8C-8498
-12
1 3/16 - 12
-12
1 1/16 - 12
2.40
61
8T-0078
-12
1 3/16 - 12
-12
1 1/16 - 12
2.87
73
6V-9162
-12
1 3/16 - 12
-12
1 1/16 - 12
3.27
83
109-5823
-12
1 3/16 - 12
-12
1 1/16 - 12
3.50
89
8T-9023
-12
1 3/16 - 12
-12
1 1/16 - 12
3.78
96
8C-8889
-12
1 3/16 - 12
-12
1 1/16 - 12
3.78
96
3/16
1/16
8C-8417
-12
1
- 12
-12
1
- 12
3.90
99
104-9223
-12
1 3/16 - 12
-12
1 1/16 - 12
4.49
114
164-5552
-12
13/16
- 12
-12
1 1/16 - 12
6.46
164
4I-0785
-12
1
3/16
- 12
-12
1 1/16 - 12
6.50
165
104-9224
-12
1 3/16 - 12
-12
1 1/16 - 12
7.44
189
110-5895
-12
1 3/16 - 12
-12
1 1/16 - 12
7.83
199
2T-2991
-12
1 3/16 - 12
-14
1 3/16 - 12
1.93
49
7E-7264
-12
1 3/16 - 12
-14
1 3/16 - 12
5.28
134
7I-1284
-12
1 3/16 - 12
-16
1 5/16 - 12
1.93
49
6V-8716
-12
1
- 12
-16
1 5/16 - 12
1.97
50
109-5821
-12
1 3/16 - 12
-16
1 5/16 - 12
2.95
75
7I-0048
-12
1 3/16 - 12
-16
1 5/16 - 12
2.95
75
8T-0197
-12
1 3/16 - 12
-16
1 5/16 - 12
3.31
84
125-7426
-12
1 3/16 - 12
-16
1 5/16 - 12
5.35
136
8C-3370
-16
1 7/16 - 12
-8
3/4
- 16
1.97
50
8T-9386
-16
1 7/16 - 12
-10
7/8
- 14
2.05
52
7/8
- 14
3.66
93
2.13
54
3/16
7/16
8C-4000
-16
1
- 12
-10
6V-8714
-16
1 7/16 - 12
-12
1 1/16 - 12
ORFS Adapters A
ORFS Male / STOR Boss (continued)
B
L
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
8T-9349
-16
1 7/16 - 12
-12
1 1/16 - 12
4.49
114
8T-6453
-16
1
- 12
-14
1 3/16 - 12
1.97
50
8C-8807
-16
1 7/16 - 12
-14
1 3/16 - 12
3.70
94
4I-7756
-16
1 7/16 - 12
-16
1 5/16 - 12
1.57
40
6V-8635
-16
1 7/16 - 12
-16
1 5/16 - 12
1.97
50
7/16
7/16
5/16
134-6962
-16
1
- 12
-16
1
- 12
2.36
60
8C-5723
-16
1 7/16 - 12
-16
1 5/16 - 12
2.72
69
8T-0198
-16
1 7/16 - 12
-16
1 5/16 - 12
3.31
84
8T-8898
-16
1 7/16 - 12
-16
1 5/16 - 12
4.13
105
8C-3443
-16
1 7/16 - 12
-16
1 5/16 - 12
4.69
119
168-9441
-16
1
- 12
-16
1 5/16 - 12
4.88
124
6V-9875
-16
1 7/16 - 12
-20
1 5/8 - 12
2.05
52
8C-3323
-16
1 7/16 - 12
-24
1 7/8 - 12
2.13
54
7/16
11/16
7/8
109-8314
-20
1
- 12
-10
2.01
51
9X-8260
-20
1 11/16 - 12
-14
1 3/16 - 12
2.20
56
8T-7927
-20
1 11/16 - 12
-16
1 5/16 - 12
2.05
52
161-8021
-20
1 11/16 - 12
-16
1 5/16 - 12
4.72
120
8T-3611
-20
1 11/16 - 12
-20
1 5/8 - 12
- 14
2.05
52
9X-6015
-20
1
- 12
-20
1 5/8 - 12
5.20
132
109-3657
-20
1 11/16 - 12
-24
1 7/8 - 12
2.13
54
8T-8985
-24
2 - 12
-20
1 5/8 - 12
2.36
60
2.13
54
8T-7926
-24
11/16
2 - 12
-24
1
7/8
- 12
ORFS Male / STOR Boss - 45° Elbow
B A
L-2
L-1
L LENGTH (in) (mm)
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
6V-9000
-4
9/16
- 18
-4
7/16
- 20
0.63
16
1.18
30
8T-0164
-4
9/16
- 18
-6
9/16
- 18
0.67
17
1.30
33
8T-7546
-6
11/16
- 16
-4
7/16
- 20
0.75
19
1.22
31
8C-3246
-6
11/16
- 16
-5
1/2
- 20
0.75
19
1.22
31
6V-9001
-6
11/16
- 16
-6
9/16
- 18
0.75
19
1.30
33
153-1818
-6
11/16
- 16
-6
9/16
- 18
0.94
24
1.50
38
6V-9876
-6
11/16
- 16
-8
3/4
- 16
0.75
19
1.42
36
8T-6754
-6
11/16
- 16
-12
0.79
20
1.97
50
9X-2085
-8
13/16
- 16
-6
9/16
- 18
0.79
20
1.30
33
6V-9002
-8
13/16
- 16
-8
3/4
- 16
0.79
20
1.42
36
6V-8624
-8
13/16
- 16
-10
7/8
- 14
0.83
21
1.77
45
127-1647
-8
13/16
- 16
-12
0.87
22
1.97
50
8T-2530
-10
1 - 14
-8
3/4
- 16
0.91
23
1.57
40
6V-9003
-10
1 - 14
-10
7/8
- 14
0.91
23
1.77
45
8T-0120
-10
1 - 14
-12
0.98
25
1.97
50
8C-6920
-12
1 3/16 - 12
-8
3/4
- 16
1.02
26
1.65
42
8T-5389
-12
1 3/16 - 12
-10
7/8
- 14
1.02
26
1.81
46
1 1/16 - 12
1 1/16 - 12
L2 LENGTH (in) (mm)
211
Adapters
1 1/16 - 12
L1 LENGTH (in) (mm)
ORFS Adapters ORFS Male / STOR Boss - 45° Elbow (continued)
B A
L-2
L-1
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
6V-9004
-12
1 3/16 - 12
-12
1 1/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
1.02
26
1.97
50
124-4499
-12
1
- 12
-16
1 5/16 - 12
1.18
30
2.05
52
8T-4149
-12
1 3/16 - 12
-16
1 5/16 - 12
1.14
29
2.05
52
8T-7970
-16
1 7/16 - 12
-12
1 1/16 - 12
1.18
30
2.05
52
6V-9005
-16
1 7/16 - 12
-16
1 5/16 - 12
1.18
30
2.05
52
3/16
7/16
5/18
143-4281
-16
1
- 12
-20
1
- 12
1.34
34
2.09
53
152-9840
-20
1 11/16 - 12
-16
1 5/16 - 12
1.26
32
2.13
54
6V-9006
-20
1 11/16 - 12
-20
1 5/8 - 12
1.26
32
2.13
54
Adapters
ORFS Male / STOR Boss - 90° Elbow
212
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
165-2016
-4
9/16
- 18
-4
7/16
- 20
0.87
22
2.48
63
6V-8628
-4
9/16
- 18
-4
7/16
- 20
0.87
22
1.30
33
149-9900
-4
9/16
- 18
-4
7/16
- 20
0.94
24
1.30
33
100-7603
-4
9/16
- 18
-5
1/2
- 20
0.91
23
1.38
35
153-6267
-4
9/16
- 18
-6
9/16
- 18
0.87
22
2.83
72
6V-8627
-4
9/16
- 18
-6
9/16
- 18
0.94
24
1.46
37
6V-9200
-6
11/16
- 16
-4
7/16
- 20
0.98
25
1.38
35
7X-0901
-6
11/16
- 16
-5
1/2
- 20
0.98
25
1.38
35
8T-1905
-6
11/16
- 16
-6
9/16
- 18
0.98
25
2.83
72
6V-8724
-6
11/16
- 16
-6
9/16
- 18
0.98
25
1.46
37
8T-1683
-6
11/16
- 16
-8
3/4
- 16
1.02
26
2.60
66
109-3656
-6
11/16
- 16
-8
3/4
- 16
1.02
26
1.61
41
6V-8723
-6
11/16
- 16
-8
3/4
- 16
1.02
26
1.61
41
9X-2134
-6
11/16
- 16
-10
7/8
- 14
1.14
29
1.97
50
6V-9343
-6
11/16
- 16
-12
1.30
33
2.17
55
8T-7521
-8
13/16
- 16
-6
9/16
- 18
1.10
28
2.60
66
8T-6876
-8
13/16
- 16
-6
9/16
- 18
1.10
28
1.46
37
8T-1686
-8
13/16
- 16
-8
3/4
- 16
1.10
28
2.60
66
6V-8625
-8
13/16
- 16
-8
3/4
- 16
1.10
28
1.61
41
125-4286
-8
13/16
- 16
-10
7/8
- 14
1.10
28
2.05
52
136-6811
-8
13/16
- 16
-10
7/8
- 14
1.10
28
1.69
43
6V-8721
-8
13/16
- 16
-10
7/8
- 14
1.22
31
1.97
50
8T-5429
-8
13/16
- 16
-12
1.34
34
2.17
55
6V-8722
-10
1 - 14
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
1 1/16 - 12
1 1/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-8
3/4
- 16
1.30
33
1.81
46
7/8
- 14
6V-8626
-10
1 - 14
-10
1.30
33
1.97
50
5I-4332
-10
1 - 14
-12
1 1/16 - 12
1.30
33
2.17
55
8T-0404
-10
1 - 14
-12
1 1/16 - 12
1.42
36
2.17
55
8C-3324
-12
1 3/16 - 12
-6
9/16
- 18
1.46
37
2.01
51
6V-9877
-12
1 3/16 - 12
-8
3/4
- 16
1.46
37
1.85
47
087-4588
-12
1 3/16 - 12
-8
3/4
- 16
1.46
37
2.44
62
6V-8629
-12
1 3/16 - 12
-10
7/8
- 14
1.46
37
2.05
52
ORFS Adapters ORFS Male / STOR Boss - 90° Elbow (continued)
A
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
141-4735
-12
1 3/16 - 12
-10
B STOR THREAD SIZE (in - TPI) 7/8
L2 LENGTH (in) (mm)
1.46
37
2.09
53
6V-9007
-12
1
- 12
-12
1 1/16 - 12
1.46
37
2.17
55
128-6841
-12
1 3/16 - 12
-12
1 1/16 - 12
1.46
37
2.05
52
127-5494
-12
1 3/16 - 12
-12
1 1/16 - 12
1.46
37
2.17
55
8C-8400
-12
1 3/16 - 12
-12
1 1/16 - 12
1.46
37
3.98
101
5I-4198
-12
1 3/16 - 12
-16
1 5/16 - 12
3/16
- 14
L1 LENGTH (in) (mm)
1.46
37
3.94
100
162-3122
-12
1
- 12
-16
1 5/16 - 12
1.69
43
1.97
50
6V-9182
-12
1 3/16 - 12
-16
1 5/16 - 12
1.61
41
2.36
60
119-6220
-16
1 7/16 - 12
-10
1.65
42
2.17
55
8T-6684
-16
1 7/16 - 12
-12
1 1/16 - 12
1.65
42
2.32
59
8T-8986
-16
1 7/16 - 12
-14
1 3/16 - 12
1.65
42
2.32
59
6V-9008
-16
1 7/16 - 12
-16
1 5/16 - 12
1.65
42
2.36
60
4Y-9939
-16
1 7/16 - 12
-16
1 5/16 - 12
1.65
42
2.20
56
3/16
7/16
7/8
- 14
5/8
8T-8987
-16
1
- 12
-20
1
- 12
1.77
45
2.44
62
8C-3417
-16
1 7/16 - 12
-24
1 7/8 - 12
1.93
49
2.60
66
8C-3751
-20
1 11/16 - 12
-12
1 1/16 - 12
1.77
45
2.44
62
8C-3364
-20
1 11/16 - 12
-16
1 5/16 - 12
1.77
45
2.44
62
6V-9009
-20
1 11/16 - 12
-20
1 5/8 - 12
1.77
45
2.44
62
3E-7433
-20
1 11/16 - 12
-24
1 7/8 - 12
1.93
49
2.60
66
8T-1682
-24
2 - 12
-24
1 7/8 - 12
1.93
49
2.60
66
ORFS Male / STOR Port
B L
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
3E-2337
-6
11/16
164-0193
-6
11/16
8T-6663
-6
8T-9358
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
3/8
- 24
0.91
23
- 16
-6
9/16
- 18
1.34
34
11/16
- 16
-6
9/16
- 18
1.42
36
-6
11/16
- 16
-6
9/16
- 18
2.24
57
6I-6851
-8
13/16
- 16
-6
9/16
- 18
1.26
32
157-8510
-12
1 3/16 - 12
-12
1 1/16 - 12
1.81
46
9X-6643
-12
1 3/16 - 12
-16
1 5/16 - 12
1.85
47
109-7075
-12
1 3/16 - 12
-16
1 5/16 - 12
3.03
77
8T-7813
-16
1 7/16 - 12
-16
1 5/16 - 12
1.89
48
Adapters
-3
- 16
213
ORFS Adapters ORFS Male / STOR Port - 90° Elbow
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
8T-0131
-10
1 - 14
-8
B STOR THREAD SIZE (in - TPI) 3/4
- 16
L1 LENGTH (in) (mm)
1.30
33
L2 LENGTH (in) (mm)
1.30
33
ORFS Male / SAE Code 61 Flange - Fixed
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B SAE HEAD SIZE (mm)
B FLANGE DASH SIZE
7Y-3729
-12
1 3/16 - 12
38.1
-12
1.89
48
7Y-3730
-16
1 7/16 - 12
38.1
-12
1.89
48
7Y-3731
-16
1 7/16 - 12
45.0
-16
1.97
50
L LENGTH (in) (mm)
ORFS Male / SAE Code 62 Flange - 22 1/2° Elbow
B
L2
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
5E-9234
-12
1 3/16 - 12
B SAE HEAD SIZE (mm)
B SAE FLANGE DASH SIZE
-16
L1 LENGTH (in) (mm)
0.63
16
L2 LENGTH (in) (mm)
1.18
30
L1
A
Adapters
ORFS Male / SAE Code 62 Flange - 45° Elbow
214
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B SAE HEAD SIZE (mm)
B SAE FLANGE DASH SIZE
7X-9737
-16
1 7/16 - 12
41
-12
L1 LENGTH (in) (mm)
2.13
54
L2 LENGTH (in) (mm)
1.26
32
ORFS Adapters ORFS Male / SAE Code 62 Flange - 60° Elbow
B L2
A
L1
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
5E-9235
-12
1 3/16 - 12
B SAE HEAD SIZE (mm)
B SAE FLANGE DASH SIZE
-16
L1 LENGTH (in) (mm)
1.97
50
L2 LENGTH (in) (mm)
1.57
40
ORFS Male / SAE Code 62 Flange - 90° Elbow
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B SAE HEAD SIZE (mm)
B SAE FLANGE DASH SIZE
7X-9738
-16
1 7/16 - 12
48
-16
3.27
83
3.94
100
7X-9733
-16
1 7/16 - 12
48
-16
3.27
83
2.24
57
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
ORFS Male / ORFS Male Bulkhead L-1 L-2
A
B
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
6V-8993
-4
9/16
- 18
-4
9/16
- 18
1.89
48
1.26
32
6V-8994
-6
11/16
- 16
-6
11/16
- 16
2.09
53
1.34
34
150-0128
-6
11/16
- 16
-6
11/16
- 16
2.40
61
2.40
61
8T-0129
-6
11/16
- 16
-8
13/16
- 16
2.24
57
1.42
36
8T-6445
-6
11/16
- 16
-8
13/16
- 16
2.05
52
1.26
32
6V-8995
-8
13/16
- 16
-8
13/16
- 16
2.28
58
1.42
36
6V-9353
-10
1 - 14
-8
13/16
- 16
2.44
62
1.42
36
6V-8996
-10
1 - 14
-10
1 - 14
2.64
67
1.61
41
6V-8997
-12
1 3/16 - 12
-12
1 3/16 - 12
2.72
69
1.65
42
162-2896
-12
1 3/16 - 12
-12
1 3/16 - 12
2.95
75
1.89
48
8C-8493
-16
1 7/16 - 12
-12
1 3/16 - 12
2.76
70
1.65
42
B ORFS THREAD SIZE (in - TPI)
7/16
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
6V-8998
-16
1
- 12
-16
1
- 12
2.76
70
1.65
42
7X-2464
-16
1 7/16 - 12
-16
1 7/16 - 12
4.65
118
3.54
90
9X-2317
-20
1 11/16 - 12
-16
1 7/16 - 12
2.76
70
1.65
42
215
Adapters
7/16
B ORFS THREAD DASH SIZE
ORFS Adapters ORFS Male / ORFS Male Bulkhead - 45° Elbow
B
PART NUMBER
A ORFS THREAD DASH SIZE
6V-8986
-4
9/16
6V-8987
-6
11/16
6V-9351
-6
6V-8988
-8
8C-3251
-10
6V-8989 6V-8990
A
L-2
L-1
L-2
B
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
-4
9/16
- 18
0.63
16
1.73
44
- 16
-6
11/16
- 16
0.75
19
1.93
49
11/16
- 16
-8
13/16
- 16
0.75
19
2.01
51
13/16
- 16
-8
13/16
- 16
0.79
20
2.01
51
1 - 14
-8
13/16
- 16
0.91
23
2.13
54
-10
1 - 14
-10
1 - 14
0.91
23
2.24
57
-12
1 3/16 - 12
-12
1 3/16 - 12
1.02
26
2.40
61
124-0195
-16
1 7/16 - 12
-12
1 3/16 - 12
1.18
30
2.56
65
6V-8991
-16
1 7/16 - 12
-16
1 7/16 - 12
1.18
30
2.56
65
- 18
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
145-6143
-4
9/16
- 18
-4
9/16
- 18
0.91
23
2.13
54
143-9665
-4
9/16
- 18
-4
9/16
- 18
0.91
23
2.83
72
6V-8979
-4
9/16
- 18
-4
9/16
- 18
0.87
22
1.85
47
6V-8980
-6
11/16
- 16
-6
11/16
- 16
1.02
26
2.05
52
8T-5465
-6
11/16
- 16
-8
13/16
- 16
1.10
28
2.20
56
8T-0130
-8
13/16
- 16
-6
11/16
- 16
1.14
29
2.09
53
6V-8981
-8
13/16
- 16
-8
13/16
- 16
1.14
29
2.20
56
6V-9796
-8
13/16
- 16
-10
1.26
32
2.48
63
8T-1810
-10
1 - 14
-8
1.34
34
2.32
59
6V-8982
-10
1 - 14
-10
1 - 14
1.34
34
2.48
63
6V-8983
-12
1 3/16 - 12
-12
1 3/16 - 12
1.54
39
2.64
67
6V-8984
-16
1 7/16 - 12
-16
1 7/16 - 12
1.65
42
2.80
71
3E-7426
-20
1 11/16 - 12
-16
1 7/16 - 12
1.77
45
2.99
76
6V-8985
-20
1 11/16 - 12
-20
1 11/16 - 12
1.81
46
2.99
76
1 - 14 13/16
- 16
L1 LENGTH (in) (mm)
Adapters
ORFS Male Bulkhead / JIC 37° Male
PART NUMBER
A ORFS THREAD DASH SIZE
8T-0636
-4
9/16
- 18
-4
7/16
- 20
2.05
52
-6
11/16
- 16
-6
9/16
- 18
2.20
56
8T-0403
216
L2 LENGTH (in) (mm)
ORFS Male / ORFS Male Bulkhead - 90° Elbow
L-1
A
A ORFS THREAD SIZE (in - TPI)
A ORFS THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
ORFS Adapters ORFS Male Bulkhead / NPTF Male L
B A
PART NUMBER
A ORFS THREAD DASH SIZE
8C-6915
-6
11/16
- 16
-2
1/8
- 27
1.89
48
-6
11/16
- 16
-6
3/8
- 18
2.28
58
132-5091
A ORFS THREAD SIZE (in - TPI)
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
ORFS Male Bulkhead / NPTF Female
A
B
PART NUMBER
A ORFS THREAD DASH SIZE
156-6129
-8
A ORFS THREAD SIZE (in - TPI) 13/16
- 16
B NPTF THREAD DASH SIZE
B NPTF THREAD SIZE (in - TPI) 1/8
-2
- 27
L LENGTH (in) (mm)
1.65
42
L
A
L1
B
L2
ORFS Male Bulkhead / STOR Boss
PART NUMBER
A ORFS THREAD DASH SIZE
152-6942
-8
160-5083
-10
108-3872
-12
107-6709
-16
A ORFS THREAD SIZE (in - TPI) 13/16
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-8
3/4
- 16
2.48
63
2.48
63
1 - 14
-8
3/4
- 16
2.80
71
2.80
71
1 3/16 - 12
-16
2.95
75
1.65
42
2.95
75
1.65
42
1
- 16
7/16
- 12
-16
1 5/16 - 12 1
5/16
- 12
ORFS Male Bulkhead / STOR Port
7X-7945
-4
9/16
- 18
-6
9/16
- 18
2.24
57
1.26
32
8C-8835
-6
11/16
- 16
-8
3/4
- 16
2.56
65
1.34
34
-6
11/16
-8
3/4
- 16
2.76
70
1.34
34
3E-7401
A ORFS THREAD SIZE (in - TPI)
- 16
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
217
Adapters
PART NUMBER
A ORFS THREAD DASH SIZE
ORFS Adapters B
ORFS Female Swivel / NPTF Male - 90° Elbow L2 PART NUMBER
A ORFS THREAD DASH SIZE
116-1859
-6
A
A ORFS THREAD SIZE (in - TPI) 11/16
- 16
B NPTF THREAD DASH SIZE
-4
B NPTF THREAD SIZE (in - TPI) 1/4
- 18
L1 LENGTH (in) (mm)
1.57
40
L2 LENGTH (in) (mm)
1.06
27
L1
ORFS Female Swivel / STOR Port
PART NUMBER
A ORFS THREAD DASH SIZE
132-2453
-6
11/16
- 16
-6
9/16
- 18
1.73
44
-8
13/16
- 16
-8
3/4
- 16
2.13
54
3E-7423
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
ORFS Female Swivel / STOR Port - 90° Elbow
Adapters
B
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
9X-2538
-12
1 3/16 - 12
-12
1 1/16 - 12
L1
218
2.09
53
L2 LENGTH (in) (mm)
1.22
31
ORFS Female Swivel / STOR Boss - 90° Elbow
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
153-6229
-10
1 - 14
-16
1 5/16 - 12
L2
A
L1 LENGTH (in) (mm)
L1 LENGTH (in) (mm)
1.77
45
L2 LENGTH (in) (mm)
2.36
60
ORFS Adapters B
ORFS Female / STOR Boss - 90° Elbow
L2
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
127-9015
-12
1 3/16 - 12
-6
B STOR THREAD SIZE (in - TPI) 9/16
- 18
L1 LENGTH (in) (mm)
1.46
37
L2 LENGTH (in) (mm)
2.01
51
A
L1
JIC 37° Male / ORFS Female Swivel L
B A
L2
A JIC THREAD SIZE (in - TPI)
PART NUMBER
JIC THREAD DASH SIZE
8C-7309
-4
7/16
8C-7310
-6
9/16
8C-7311
-8
8C-7312
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-4
9/16
- 18
1.65
42
- 18
-6
11/16
- 16
1.73
44
3/4
- 16
-8
13/16
- 16
2.01
51
-10
7/8
- 14
-10
1 - 14
2.20
56
8C-7313
-12
1
1/16
- 12
-12
1
3/16
- 12
2.56
65
8C-7334
-16
1 5/16 - 12
-16
1 7/16 - 12
2.76
70
8C-7335
-20
1 5/8 - 12
-20
1 11/16 - 12
2.80
71
- 20
JIC 37° Male / ORFS Female Swivel - 90° Elbow
L1 B
PART NUMBER
A JIC THREAD DASH SIZE
5I-8883
-6
A JIC THREAD SIZE (in - TPI) 9/16
- 18
B ORFS THREAD DASH SIZE
-6
B ORFS THREAD SIZE (in - TPI) 11/16
- 16
L1 LENGTH (in) (mm)
1.06
27
L2 LENGTH (in) (mm)
1.14
29
A
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
7R-0042
-12
1 1/16 - 12
-12
1 3/16 - 12
Adapters
STOR Boss / ORFS Female L LENGTH (in) (mm)
2.99
76
219
ORFS Adapters STOR Boss / ORFS Female Swivel
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
7X-3162
-4
7/16
7X-3163
-6
9/16
4I-6287
-6
9X-2847 135-2755
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-4
9/16
- 18
1.46
37
- 18
-6
11/16
- 16
1.57
40
9/16
- 18
-6
11/16
- 16
1.61
41
-6
9/16
- 18
-8
13/16
- 16
1.85
47
-8
3/4
- 16
-8
13/16
- 16
1.61
41
7X-3164
-8
3/4
- 16
-8
13/16
- 16
1.93
49
108-7251
-8
3/4
- 16
-10
1 - 14
2.20
56
7I-1036
-8
3/4
- 16
-12
1 3/16 - 12
2.20
56
7X-3165
-10
7/8
- 14
-10
1 - 14
2.13
54
158-3049
-12
1 1/16 - 12
-12
1 3/16 - 12
1.77
45
7I-8310
-12
1 1/16 - 12
-12
1 3/16 - 12
2.28
58
7X-3166
-12
1 1/16 - 12
-12
1 3/16 - 12
2.36
60
4I-6140
-16
1 5/16 - 12
-12
1 3/16 - 12
2.40
61
- 20
5/16
7/16
4I-6141
-16
1
- 12
-16
1
- 12
2.56
65
7X-3167
-16
1 5/16 - 12
-16
1 7/16 - 12
2.68
68
STOR Boss / ORFS Female Swivel - 45° Elbow
L-2
B L-1
PART NUMBER
A STOR THREAD DASH SIZE
8T-2335
-6
9/16
-8
3/4
8T-0252
A STOR THREAD SIZE (in - TPI)
- 18 - 16
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-6
11/16
- 16
1.30
33
1.14
29
-8
13/16
- 16
1.46
37
1.50
38
A
Adapters
STOR Boss / ORFS Female Swivel - 90° Elbow
220
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B ORFS THREAD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
8T-0788
-6
9/16
- 18
-6
11/16
- 16
1.46
37
1.14
29
9X-2091
-8
3/4
- 16
-6
11/16
- 16
1.61
41
1.42
36
8T-0249
-8
3/4
- 16
-8
13/16
- 16
1.61
41
1.50
38
8T-3001
-10
7/8
- 14
-10
1 - 14
1.97
50
1.61
41
8T-6451
-12
1 1/16 - 12
-12
1 3/16 - 12
2.17
55
1.81
46
5I-3183
-16
1 5/16 - 12
-16
1 7/16 - 12
2.36
60
2.09
53
170-6541
-20
1 5/8 - 12
-20
1 11/16 - 12
2.44
62
2.28
58
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
ORFS Adapters L-2
ORFS Male / ORFS Male / ORFS Male - Tee
L-3
L-1 C B
A
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
6V-8787
-4
9/16
8T-8983
-6
11/16
6V-8788
-6
8T-0379 8T-3444
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
9/16
- 18
-4
9/16
- 18
0.87
22
0.87
22
0.87
22
- 16
-4
9/16
- 18
-4
9/16
- 18
0.98
25
0.94
24
0.94
24
11/16
- 16
-6
11/16
- 16
-6
11/16
- 16
0.98
25
0.98
25
0.98
25
-6
11/16
- 16
-6
11/16
- 16
-6
11/16
- 16
2.05
52
1.02
26
1.02
26
-8
13/16
- 16
-6
11/16
- 16
-6
11/16
- 16
1.10
28
1.02
26
1.02
26
8T-2363
-8
13/16
- 16
-8
13/16
- 16
-6
11/16
- 16
1.10
28
1.10
28
1.06
27
6V-8789
-8
13/16
- 16
-8
13/16
- 16
-8
13/16
- 16
1.10
28
1.10
28
1.10
28
7X-7715
-8
13/16
- 16
-8
13/16
- 16
-8
13/16
- 16
2.20
56
1.14
29
1.14
29
6V-9272
-8
13/16
- 16
-10
1 - 14
-8
13/16
- 16
1.22
31
1.30
33
1.22
31
6V-9031
-8
13/16
- 16
-10
1 - 14
-10
1.22
31
1.30
33
1.30
33
8T-0248
-8
13/16
- 16
-12
1 3/16 - 12
-8
- 16
1.34
34
1.46
37
1.34
34
121-7697
-8
13/16
- 16
-12
1 3/16 - 12
-12
1 3/16 - 12
1.81
46
1.46
37
1.46
37
6V-9158
-10
13/16
1.30
33
1.22
31
1.22
31
- 18
1 - 14
-8
13/16
- 16
-8
13/16
- 16
1 - 14 13/16
- 16
6V-9043
-10
1 - 14
-8
-10
1 - 14
1.30
33
1.22
31
1.30
33
6V-8790
-10
1 - 14
-10
1 - 14
-10
1 - 14
1.30
33
1.30
33
1.30
33
8T-6755
-10
1 - 14
-12
1 3/16 - 12
-16
1 7/16 - 12
1.57
40
1.61
41
1.65
42
7X-7703
-12
1 3/16 - 12
-10
1 - 14
-10
1 - 14
1.46
37
1.42
36
1.42
36
6V-8791
-12
1 3/16 - 12
-12
1 3/16 - 12
-12
1 3/16 - 12
1.46
37
1.46
37
1.46
37
158-4307
-12
1 3/16 - 12
-16
1 7/16 - 12
-12
1 3/16 - 12
1.46
37
1.65
42
1.46
37
124-6105
-14
1 3/16 - 12
-14
1 3/16 - 12
-14
1 3/16 - 12
1.46
37
1.46
37
1.46
37
8T-1012
-16
1 7/16 - 12
-12
1 3/16 - 16
-12
1 3/16 - 12
1.65
42
1.61
41
1.61
41
7/16
7/16
7/16
6V-8792
-16
1
- 12
-16
1
- 12
-16
1
- 12
1.65
42
1.65
42
1.65
42
2T-2149
-16
1 7/16 - 12
-16
1 7/16 - 12
-16
1 7/16 - 12
1.65
42
1.65
42
1.65
42
8T-5907
-16
1 7/16 - 12
-20
1 11/16 - 12
-20
1 11/16 - 12 1.77
45
1.77
45
1.77
45
8I-1022
-20
1 11/16 - 12
-20
1 11/16 - 12
-20
1 11/16 - 12 1.77
45
1.77
45
1.77
45
ORFS Male / ORFS Male / ORFS Female Swivel - Tee A ORFS THRD SIZE (in - TPI)
6V-9835
-4
9/16
6V-9836
-6
11/16
101-0052
-8
6V-9837
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C ORFS THRD DASH SIZE
-4
9/16
- 16
-6
11/16
13/16
- 16
-8
-8
13/16
- 16
117-7274
-8
13/16
- 16
6V-9838
-10
1 - 14
-10
1 - 14
-10
6V-9839
-12
1 3/16 - 12
-12
1 3/16 - 12
-12
- 18
3/16
C ORFS THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
9/16
- 18
0.87
22
0.87
22
1.02
26
- 16
-6
11/16
- 16
0.98
25
0.98
25
1.14
29
13/16
- 16
-6
11/16
- 16
1.10
28
1.10
28
1.34
34
-8
13/16
- 16
-8
13/16
- 16
1.10
28
1.10
28
1.50
38
-8
13/16
- 16
-8
13/16
- 16
1.10
28
1.10
28
1.50
38
1 - 14
1.30
33
1.30
33
1.61
41
1 3/16 - 12
1.46
37
1.46
37
1.81
46
- 18
7/16
7/16
139-1802
-12
1
- 12
-16
1
- 12
-16
1
- 12
1.65
42
1.65
42
3.94 100
9X-2235
-16
1 7/16 - 12
-12
1 3/16 - 12
-12
1 3/16 - 12
1.65
42
1.61
41
2.05
52
6V-9840
-16
1 7/16 - 12
-16
1 7/16 - 12
-16
1 7/16 - 12
1.65
42
1.65
42
2.09
53
7X-2429
-20
1 11/16 - 12
-20
1 11/16 - 12
-20
1 11/16 - 12 1.77
45
1.77
45
2.28
58
221
Adapters
PART NUMBER
A ORFS THRD DASH SIZE
ORFS Adapters L-2
L-3
L-1
B
A
C
ORFS Male / ORFS Male / STOR Boss - Tee
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
6V-8780
-4
9/16
119-6346
-4
9/16
6V-9161
-6
6V-8781 6V-8782
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THRD SIZE (in -TPI)
-4
9/16
- 18
-4
- 18
-8
13/16
- 16
-12
11/16
- 16
-6
11/16
- 16
-4
7/16
-6
11/16
- 16
-6
11/16
- 16
-6
-8
13/16
- 16
-8
13/16
- 16
115-8634
-8
13/16
- 16
-8
13/16
107-1658
-8
13/16
- 16
-10
1 - 14
113-2378
-8
13/16
- 16
-10
4I-7651
-8
13/16
- 16
6V-8783
-10
8T-1684
- 18
7/16
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
0.87
22
0.87
22
1.30
33
1.14
29
1.18
30
2.17
55
- 20
0.98
25
0.98
25
1.38
35
9/16
- 18
0.98
25
0.98
25
1.46
37
-8
3/4
- 16
1.10
28
1.10
28
1.61
41
-10
7/8
- 14
1.22
31
1.22
31
1.97
50
-10
7/8
- 14
1.10
28
1.30
33
1.97
50
1 - 14
-10
7/8
- 14
1.10
28
1.30
33
1.97
50
-12
1 3/16 - 12
-8
3/4
- 16
1.26
32
1.46
37
1.61
41
1 - 14
-10
1 - 14
-10
7/8
- 14
1.30
33
1.30
33
1.97
50
-10
1 - 14
-10
1 - 14
-16
1 5/16 - 12
1.57
40
1.57
40
2.36
60
109-5812
-10
1 - 14
-12
1 3/16 - 12
-12
1 1/16 - 12
1.46
37
1.38
35
1.97
50
102-0773
-10
1 - 14
-12
1 3/16 - 12
-12
1 1/16 - 12
1.46
37
1.38
35
1.97
50
- 16
3/16
- 20
L1 LENGTH (in) (mm)
1 1/16 - 12
1/16
6V-9175
-10
1 - 14
-12
1
- 12
-12
1
- 12
1.42
36
1.46
37
2.17
55
109-5819
-10
1 - 14
-12
1 3/16 - 12
-16
1 5/16 - 12
1.46
37
1.38
35
1.97
50
6I-6885
-10
1 - 14
-12
1 3/16 - 12
-16
1 5/16 - 12
1.46
37
1.38
35
1.97
50
8T-2883
-12
1 3/16 - 12
-6
11/16
-12
1 1/16 - 12
1.46
37
1.26
32
2.17
55
6V-9032
-12
1 3/16 - 12
-10
1 - 14
-10
1.46
37
1.46
37
2.05
52
118-4569
-12
1 3/16 - 12
-10
1 - 14
-12
1.46
37
1.34
34
2.17
55
122-9088
-12
1 3/16 - 12
-12
1 3/16 - 12
-10
1.46
37
1.46
37
2.01
51
6V-8784
-12
1 3/16 - 12
-12
1 3/16 - 12
-12
1.46
37
1.46
37
2.17
55
3/16
- 16
3/16
7/8
- 14
1 1/16 - 12 7/8
- 14
1 1/16 - 12 5/16
8T-1685
-12
1
- 12
-12
1
- 12
-16
1
- 12
1.61
41
1.61
41
2.36
60
8T-7520
-12
1 3/16 - 12
-16
1 7/16 - 12
-12
1 1/16 - 12
1.61
41
1.65
42
2.32
59
8T-6356
-12
1 3/16 - 12
-16
1 7/16 - 12
-16
1 5/16 - 12
1.61
41
1.65
42
2.36
60
126-3902
-12
1 3/16 - 12
-20
1 11/16 - 12
-12
1 1/16 - 12
1.77
45
1.77
45
2.44
62
134-6953
-16
1 7/16 - 12
-8
- 16
-12
1 1/16 - 12
1.65
42
1.30
33
2.36
60
128-7625
-16
1 7/16 - 12
-12
1 3/16 - 12
-12
1 1/16 - 12
1.65
42
1.46
37
2.36
60
6V-8785
-16
1 7/16 - 12
-16
1 7/16 - 12
-16
1 5/16 - 12
1.65
42
1.65
42
2.36
60
109-2953
-16
1 7/16 - 12
-16
1 7/16 - 12
-16
1 5/16 - 12
1.77
45
1.69
43
2.36
60
1.77
45
1.77
45
2.44
62
6V-8786
-20
1
11/16
- 12
-20
13/16
1
11/16
- 12
-20
1
5/8
- 12
ORFS Male / ORFS Male / ORFS Male Bulkhead - Tee L-3
Adapters
L-2
L-1
B
222
A
C
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
143-8327
-4
9/16
- 18
-4
9/16
- 18
-4
9/16
- 18
0.75
19
0.75
19
0.98
25
8C-6444
-4
9/16
- 18
-4
9/16
- 18
-4
9/16
- 18
0.91
23
0.91
23
1.85
47
7X-0820
-6
11/16
- 16
-6
11/16
- 16
-6
11/16
- 16
1.02
26
1.02
26
2.05
52
8T-6895
-8
13/16
- 16
-8
13/16
- 16
-8
13/16
- 16
1.14
29
1.14
29
2.20
56
6V-9489
-8
13/16
- 16
-12
1 3/16 - 12
-8
13/16
- 16
1.42
36
1.50
38
2.44
62
148-6757
-10
1 - 14
-8
13/16
-8
13/16
- 16
1.38
35
1.38
35
2.32
59
6V-9352
-10
1 - 14
-10
1 - 14
-8
13/16
- 16
1.34
34
1.34
34
2.32
59
6V-9350
-10
1 - 14
-10
1 - 14
-10
1.34
34
1.34
34
2.48
63
8T-1809
-10
1 - 14
-12
1.50
38
1.50
38
2.44
62
13/16
- 16
- 12
C ORFS THRD DASH SIZE
-8
C ORFS THRD SIZE (in -TPI)
1 - 14 13/16
- 16
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
ORFS Adapters L-2
L-3
ORFS Male / ORFS Male / ORFS Male Bulkhead - Tee (continued)
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
B ORFS THRD DASH SIZE
110-4628
-12
1 3/16 - 12
-8
L-1
B
A
C
3/16
B ORFS THRD SIZE (in - TPI) 13/16
- 16
3/16
C ORFS THRD DASH SIZE
-8
C ORFS THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
13/16
- 16
2.36
60
1.38
35
2.44
62
3/16
6V-9160
-12
1
- 12
-12
1
- 12
-12
1
- 12
1.54
39
1.54
39
2.64
67
138-1916
-12
1 3/16 - 12
-16
1 7/16 - 12
-12
1 3/16 - 12
1.61
41
1.65
42
2.64
67
3E-7443
-16
1 7/16 - 12
-12
1 3/16 - 12
-12
1 3/16 - 12
1.69
43
1.65
42
2.80
71
ORFS Male / ORFS Female Swivel / STOR Port - Tee
PART NUMBER
A ORFS THRD DASH SIZE
081-5645
-8
107-0496
-16
A ORFS THRD SIZE (in - TPI) 13/16
- 16
7/16
1
- 12
B ORFS THRD DASH SIZE
-8 -16
B ORFS THRD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THRD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
13/16
- 16
-6
9/16
- 18
1.10
28
1.50
38
1.10
28
7/16
- 12
-8
3/4
- 16
1.65
42
2.09
53
1.65
42
1
ORFS Male / STOR Boss / STOR Port - Tee
PART NUMBER
A ORFS THRD DASH SIZE
8Y-7452
-4
A ORFS THRD SIZE (in - TPI) 9/16
- 18
3/16
B STOR THRD DASH SIZE
B STOR THRD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
-6
9/16
- 18
0.87
22
1.34
34
0.87
22
3/4
- 16
-6
9/16
- 18
1.46
37
1.85
47
0.67
17
-8
3/4
- 16
1.77
45
2.17
55
1.10
28
125-5159
-12
1
- 12
-8
124-1212
-12
1 3/16 - 12
-12
1 1/16 - 12
ORFS Male / STOR Port / STOR Boss - Tee A ORFS THRD SIZE (in - TPI)
8T-3313
-4
9/16
8C-3309
-4
9/16
126-6872
-6
104-8970
B STOR THRD DASH SIZE
B STOR THRD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-6
9/16
- 20
-4
7/16
- 20
1.02
26
0.87
22
1.30
33
- 18
-6
9/16
- 18
-6
9/16
- 18
0.94
24
0.87
22
1.46
37
11/16
- 16
-6
9/16
- 18
-6
9/16
- 18
0.98
25
0.98
25
1.46
37
-8
13/16
- 16
-3
3/8
- 24
-10
7/8
- 14
1.22
31
0.98
25
1.93
49
9X-2492
-8
13/16
- 16
-6
9/16
- 18
-8
3/4
- 16
1.10
28
1.10
28
1.61
41
8T-8901
-12
1 3/16 - 12
-12
1.73
44
1.46
37
2.44
62
- 18
1 1/16 - 12
-12
1 1/16 - 12
223
Adapters
PART NUMBER
A ORFS THRD DASH SIZE
ORFS Adapters L-2
ORFS Male Bulkhead / ORSF Male / ORFS Male - Tee
L-3
L-1
C
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THRD SIZE (in -TPI)
132-5152
-12
1 3/16 - 12
-12
1 3/16 - 12
-12
1 3/16 - 12
L LENGTH (in) (mm)
2.64
67
L2 LENGTH (in) (mm)
1.46
37
L3 LENGTH (in) (mm)
1.46
37
A B
ORFS Male / ORFS Male / ORFS Female Swivel - Tee (Trapezoidal)
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THRD SIZE (in -TPI)
121-6268
-12
1 3/16 - 12
-10
1 - 14
-12
1 3/16 - 12
L LENGTH (in) (mm)
1.46
37
L2 LENGTH (in) (mm)
1.34
34
L3 LENGTH (in) (mm)
1.81
46
ORFS Male / ORFS Male / STOR Boss - Tee (Trapezoidal)
PART NUMBER
A ORFS THRD DASH SIZE
104-8969
-8
108-7453
Adapters
L-2
C
224
A
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C STOR THRD DASH SIZE
13/16
- 16
-10
1 - 14
-10
3/16
- 12
-10
1 - 14
-12
1
C STOR THRD SIZE (in -TPI) 7/8
- 14
1 1/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
1.10
28
1.30
33
1.97
50
1.46
37
1.34
34
2.17
55
ORFS Female Swivel / ORFS Male / ORFS Male - Tee
L-3
L-1
B
-12
A ORFS THRD SIZE (in - TPI)
PART NUMBER
A ORFS THRD DASH SIZE
A ORFS THRD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C ORFS THRD DASH SIZE
7X-0797
-4
9/16
6V-9842
-4
9/16
6V-9843
-6
6V-9844
-8
6V-9845
-10
1 - 14
-10
1 - 14
-10
6V-9846
-12
1 3/16 - 12
-12
1 3/16 - 12
-12
C ORFS THRD SIZE (in -TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
9/16
- 18
-4
9/16
- 18
1.06
27
0.87
22
0.87
22
- 18
-4
9/16
- 18
-4
9/16
- 18
1.06
27
0.87
22
0.87
22
11/16
- 16
-6
11/16
- 16
-6
11/16
- 16
1.14
29
0.98
25
0.98
25
13/16
- 16
-8
13/16
- 16
-8
13/16
- 16
1.50
38
1.10
28
1.10
28
1 - 14
1.61
41
1.30
33
1.30
33
1 3/16 - 12
1.81
46
1.46
37
1.46
37
- 18
3/16
7/16
7/16
3E-7407
-12
1
- 12
-16
1
- 12
-16
1
- 12
2.05
52
1.65
42
1.65
42
6V-9847
-16
1 7/16 - 12
-16
1 7/16 - 12
-16
1 7/16 - 12
2.09
53
1.65
42
1.65
42
9X-6653
-20
1 11/16 - 12
-20
1 11/16 - 12
-20
1 11/16 - 12 2.28
58
1.77
45
1.77
45
ORFS Adapters L-2
ORFS Female Swivel / ORFS Male / ORFS Female Swivel Tee
L-3 C
B
PART NUMBER
A ORFS THRD DASH SIZE
A
8T-6454
-20
L-1
L-2
A ORFS THRD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THRD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THRD SIZE (in -TPI)
1 11/16 - 12
-16
1 7/16 - 12
-16
1 7/16 - 12
L LENGTH (in) (mm)
2.24
57
L2 LENGTH (in) (mm)
1.77
45
L3 LENGTH (in) (mm)
2.24
57
ORFS Female Swivel / ORFS Male / STOR Boss - Tee
L-3 C
L-1 B
PART NUMBER
A ORFS THRD DASH SIZE
8T-2556
-6
A ORFS THRD SIZE (in - TPI) 11/16
- 16
B ORFS THRD DASH SIZE
-6
B ORFS THRD SIZE (in - TPI) 11/16
- 16
C STOR THRD DASH SIZE
-6
C STOR THRD SIZE (in -TPI) 9/16
- 18
L1 LENGTH (in) (mm)
1.14
29
L2 LENGTH (in) (mm)
0.98
25
L3 LENGTH (in) (mm)
1.46
37
A
L2
L3
ORFS Female Swivel / ORFS Male / STOR Port - Tee
B C
L1
PART NUMBER
A ORFS THRD DASH SIZE
149-4289
-4
135-5985
-10
A ORFS THRD SIZE (in - TPI) 9/16
- 18
1 - 14
B ORFS THRD DASH SIZE
-4 -10
B ORFS THRD SIZE (in - TPI) 9/16
- 18
1 - 14
C STOR THRD DASH SIZE
C STOR THRD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
7/16
- 20
1.10
28
0.91
23
0.79
20
-8
3/4
- 16
1.69
43
1.38
35
1.22
31
A
L2
L3
NPTF Male / ORFS Male / ORFS Male - Tee
B
C
3E-2343
-8
A NPTF THRD SIZE (in - TPI) 1/2
- 14
B ORFS THRD DASH SIZE
-8
B ORFS THRD SIZE (in - TPI) 13/16
- 16
C ORFS THRD DASH SIZE
-8
C ORFS THRD SIZE (in -TPI) 13/16
- 16
L1 LENGTH (in) (mm)
1.46
37
L2 LENGTH (in) (mm)
1.10
28
L3 LENGTH (in) (mm)
1.10
28
A
225
Adapters
L1
PART NUMBER
A NPTF THRD DASH SIZE
ORFS Adapters NPTF Female / ORFS Male / ORFS Female Swivel - Tee L-2
L-3 C
L-1 B
PART NUMBER
A NPTF THRD DASH SIZE
8T-2352
-4
A NPTF THRD SIZE (in - TPI) 1/4
- 18
B ORFS THRD DASH SIZE
-6
B ORFS THRD SIZE (in - TPI) 11/16
- 16
C ORFS THRD DASH SIZE
-6
C ORFS THRD SIZE (in -TPI) 11/16
- 16
L1 LENGTH (in) (mm)
0.98
25
L2 LENGTH (in) (mm)
0.98
25
L3 LENGTH (in) (mm)
1.14
29
A
L2
L3
NPTF Female / ORFS Male / STOR Boss - Tee
B
L1 C
PART NUMBER
A NPTF THRD DASH SIZE
8C-3322
-2
A NPTF THREAD SIZE (in - TPI) 1/8
- 27
B ORFS THRD DASH SIZE
-8
B ORFS THREAD SIZE (in - TPI) 13/16
- 16
C STOR THRD DASH SIZE
-6
C STOR THREAD SIZE (in -TPI) 9/16
- 18
L1 LENGTH (in) (mm)
1.10
28
L2 LENGTH (in) (mm)
1.10
28
L3 LENGTH (in) (mm)
1.46
37
A
L2
L3 C
B
L1
STOR Boss / ORFS Male / NPTF Female - Tee
PART NUMBER
A STOR THRD DASH SIZE
146-9571
-6
A STOR THREAD SIZE (in - TPI) 9/16
- 18
B ORFS THRD DASH SIZE
-6
B ORFS THREAD SIZE (in - TPI) 11/16
- 16
C NPTF THRD DASH SIZE
-4
C NPTF THREAD SIZE (in -TPI) 1/4
- 18
L1 LENGTH (in) (mm)
1.46
37
L2 LENGTH (in) (mm)
0.98
25
L3 LENGTH (in) (mm)
0.98
25
A
Adapters
L2
L1
L3
B
STOR Boss / ORFS Male / ORFS Male - Tee
C
A
PART NUMBER
A STOR THRD DASH SIZE
6V-8773
-4
7/16
- 20
-4
9/16
- 18
-4
9/16
- 18
1.30
33
0.87
22
0.87
22
8T-0786
-4
7/16
- 20
-4
9/16
- 18
-4
9/16
- 18
1.42
36
0.98
25
0.87
22
7X-0838
-4
7/16
- 20
-6
11/16
- 16
-6
11/16
- 16
1.30
33
0.98
25
0.98
25
6V-8774
-6
9/16
- 18
-6
11/16
- 16
-6
11/16
- 16
1.46
37
0.98
25
0.98
25
143-7681
-6
9/16
- 18
-6
11/16
- 16
-6
11/16
- 16
0.98
25
0.98
25
1.14
29
8T-6696
-8
3/4
- 16
-6
11/16
- 16
-8
13/16
- 16
1.61
41
1.02
26
1.10
28
6V-8775
-8
3/4
- 16
-8
13/16
- 16
-8
13/16
- 16
1.61
41
1.10
28
1.10
28
109-5811
-8
3/4
- 16
-10
117-5207
-10
7/8
- 14
-6
6V-8776
-10
7/8
- 14
-10
-10
7/8
8T-8984
226
A STOR THREAD SIZE (in - TPI)
- 14
B ORFS THRD DASH SIZE
-12
B ORFS THREAD SIZE (in - TPI)
1 - 14 11/16
- 16
1 - 14 13/16
- 12
C ORFS THRD DASH SIZE
C ORFS THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-10
1 - 14
1.81
46
1.10
28
1.10
28
-16
1 7/16 - 12
2.17
55
1.42
36
1.65
42
-10
1 - 14
1.97
50
1.30
33
1.30
33
2.01
51
1.46
37
1.46
37
-12
13/16
- 12
ORFS Adapters L2
L1
L3
B
STOR Boss / ORFS Male / ORFS Male - Tee (continued)
C
A
L-2
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THREAD SIZE (in -TPI)
6V-8777
-12
1 1/16 - 12
-12
1 3/16 - 12
-12
1 3/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
2.17
55
1.46
37
1.46
37
108-7005
-12
1
- 12
-12
1
- 12
-16
1 7/16 - 12
2.32
59
1.46
37
1.65
42
134-6954
-12
1 1/16 - 12
-16
1 7/16 - 12
-10
1 - 14
2.36
60
1.65
42
1.57
40
102-1384
-16
1 5/16 - 12
-12
1 3/16 - 12
-12
1 3/16 - 12
2.36
60
1.61
41
1.61
41
6V-8778
-16
1 5/16 - 12
-16
1 7/16 - 12
-16
1 7/16 - 12
2.36
60
1.65
42
1.65
42
1/16
5/8
3/16
7/16
3/16
8T-1120
-20
1
- 12
-16
1
- 12
-12
1
2.44
62
1.77
45
1.77
45
165-3938
-20
1 5/8 - 12
-20
1 11/16 - 12
-20
1 11/16 - 12 2.44
- 12
62
1.77
45
1.77
45
STOR Boss / ORFS Male / ORFS Female Swivel - Tee
L-3 C
B
L-1
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THREAD SIZE (in -TPI)
8C-6798
-16
1 5/16 - 12
-16
1 7/16 - 12
-16
1 7/16 - 12
L1 LENGTH (in) (mm)
2.36
60
L2 LENGTH (in) (mm)
1.65
42
L3 LENGTH (in) (mm)
2.09
53
A
STOR Port / ORFS Male / ORFS Male - Tee
PART NUMBER
A STOR THRD DASH SIZE
8T-0082
-6
9/16
- 18
-8
-6
9/16
- 18
-12
8T-0083
A STOR THREAD SIZE (in - TPI)
B ORFS THRD DASH SIZE
B ORFS THREAD SIZE (in - TPI) 13/16
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
- 16
1.10
28
1.10
28
1.10
28
1 3/16 - 12
1.46
37
1.46
37
1.46
37
STOR Port / ORFS Male / ORFS Female Swivel - Tee A STOR THREAD SIZE (in - TPI)
127-3026
-3
3/8
7X-2444
-6
9/16
7X-0871
-6
7X-0872
B ORFS THRD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-8
13/16
- 16
-8
13/16
- 16
1.10
28
1.10
28
1.50
38
- 18
-4
9/16
- 18
-4
9/16
- 18
0.87
22
0.87
22
1.10
28
9/16
- 18
-8
13/16
- 16
-8
13/16
- 16
1.10
28
1.10
28
1.50
38
-6
9/16
- 18
-10
1 - 14
-10
1 - 14
1.30
33
1.30
33
1.61
41
7X-0873
-6
9/16
- 18
-12
1 3/16 - 12
-12
1 3/16 - 12
1.46
37
1.46
37
1.81
46
8T-4834
-6
9/16
- 18
-16
1 7/16 - 12
-16
1 7/16 - 12
1.38
35
1.65
42
2.13
54
127-2141
-8
3/4
- 16
-10
1 - 14
-10
1 - 14
1.30
33
1.30
33
1.61
41
-8
3/4
-12
3/16
-12
3/16
1.30
33
1.46
37
1.81
46
9X-2289
- 24
- 16
1
- 12
1
- 12
227
Adapters
PART NUMBER
A STOR THRD DASH SIZE
ORFS Adapters STOR Port / ORFS Female / ORFS Female Swivel - Tee
PART NUMBER
A STOR THRD DASH SIZE
8T-8902
-6
9/16
-8
3/4
110-2218
L-2
A
L2
C
L3
C
Adapters
A
228
- 16
B ORFS THREAD SIZE (in - TPI)
C ORFS THRD DASH SIZE
C ORFS THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-6
11/16
- 16
-6
11/16
- 16
0.98
25
0.98
25
1.22
31
-8
13/16
- 16
-8
13/16
- 16
1.77
45
1.18
30
1.57
40
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
7X-2463
-3
3/8
081-5648
-6
9/16
3E-2310
-6
8T-6338
B ORFS THRD DASH SIZE
B ORFS THREAD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
9/16
- 18
-4
7/16
- 20
0.87
22
0.87
22
1.30
33
- 18
-4
9/16
- 18
-6
9/16
- 18
0.98
25
0.98
25
1.46
37
9/16
- 18
-6
11/16
- 16
-6
9/16
- 18
0.98
25
0.98
25
1.38
35
-6
9/16
- 18
-8
13/16
- 16
-8
3/4
- 16
1.10
28
1.10
28
1.61
41
8C-0569
-6
9/16
- 18
-12
1
- 12
-12
1
- 12
1.02
26
1.46
37
2.17
55
109-6511
-6
9/16
- 18
-12
1 3/16 - 12
-16
1 5/16 - 12
1.65
42
1.61
41
2.36
60
8T-1674
-6
9/16
- 18
-16
1 7/16 - 12
-16
1 5/16 - 12
1.65
42
1.65
42
2.36
60
8C-7514
-10
7/8
- 14
-8
13/16
- 16
-10
1.30
33
1.22
31
1.97
50
8T-8900
-12
1 1/16 - 12
-12
1 3/16 - 12
-12
1 1/16 - 12
1.46
37
1.73
44
2.44
62
117-7734
-16
1 5/16 - 12
-12
1 3/16 - 12
-16
1 5/16 - 12
1.46
37
1.61
41
2.36
60
- 24
3/16
1/16
7/8
- 14
STOR Boss / STOR Port / ORFS Male - Tee
B
L1
- 18
B ORFS THRD DASH SIZE
STOR Port / ORFS Male / STOR Boss - Tee
L-3
L-1
B
A STOR THREAD SIZE (in - TPI)
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
8T-3311
-6
9/16
7X-2459
-6
9/16
8C-3415
-8
126-8306 9X-2541
B STOR THRD DASH SIZE
B STOR THREAD SIZE (in - TPI)
-6
9/16
- 18
-6
9/16
3/4
- 16
-6
-8
3/4
- 16
-10
7/8
- 14
3E-2345
-12
1
1/16
8C-4082
-12
8T-3312
-16
8C-6515
-16
C ORFS THRD DASH SIZE
C ORFS THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-4
9/16
- 18
1.61
41
0.94
24
0.94
24
- 18
-6
11/16
- 16
1.46
37
0.98
25
0.98
25
9/16
- 18
-6
11/16
- 16
1.61
41
0.98
25
1.06
27
-6
9/16
- 18
-8
13/16
- 16
1.61
41
1.10
28
1.10
28
-6
9/16
- 18
-12
1 3/16 - 12
2.01
51
0.98
25
1.61
41
- 12
-6
9/16
- 18
-12
1
- 12
2.17
55
0.98
25
1.61
41
1 1/16 - 12
-6
9/16
- 18
-16
1 7/16 - 12
2.36
60
1.65
42
1.65
42
1 5/16 - 12
-6
9/16
- 18
-12
1 3/16 - 12
2.36
60
0.98
25
1.61
41
1 5/16 - 12
-6
9/16
- 18
-16
1 7/16 - 12
2.36
60
1.65
42
1.65
42
- 18
- 18
3/16
ORFS Adapters L2
L3
STOR Port / STOR Port / ORFS Male - Tee C
B
L1
PART NUMBER
A STOR THRD DASH SIZE
122-1852
-8
A STOR THREAD SIZE (in - TPI) 3/4
- 16
B STOR THRD DASH SIZE
-8
B STOR THREAD SIZE (in - TPI) 3/4
C ORFS THRD DASH SIZE
- 16
-6
C ORFS THREAD SIZE (in -TPI) 11/16
- 16
L1 LENGTH (in) (mm)
1.57
40
L2 LENGTH (in) (mm)
0.91
23
L3 LENGTH (in) (mm)
1.26
32
A
STOR Port / STOR Port / ORFS Female Swivel - Tee
PART NUMBER
A STOR THRD DASH SIZE
5I-4376
-6
A STOR THREAD SIZE (in - TPI) 9/16
- 18
B STOR THRD DASH SIZE
-6
B STOR THREAD SIZE (in - TPI) 9/16
C ORFS THRD DASH SIZE
- 18
-6
C ORFS THREAD SIZE (in -TPI) 11/16
- 16
L1 LENGTH (in) (mm)
1.10
28
L2 LENGTH (in) (mm)
0.59
15
L3 LENGTH (in) (mm)
1.14
29
ORFS Male / ORFS Male / ORFS Male / ORFS Male - Cross
PART NUMBER
A-D ORFS THREAD DASH SIZE
7X-3406
-6
8I-1021
-20
A-D ORFS THREAD SIZE (in - TPI) 11/16
- 16
1 11/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
L4 LENGTH (in) (mm)
0.98
25
0.98
25
0.98
25
0.98
25
1.77
45
1.77
45
1.77
45
1.77
45
ORFS Male / ORFS Male / ORFS Male / ORFS Female Swivel - Cross A-D ORFS THREAD SIZE (in - TPI)
117-5208
-16
1 7/16 - 12
L1 LENGTH (in) (mm)
1.65
42
L2 LENGTH (in) (mm)
1.65
42
L3 LENGTH (in) (mm)
1.65
42
Adapters
PART NUMBER
A-D ORFS THREAD DASH SIZE
L4 LENGTH (in) (mm)
2.09
53
229
ORFS Adapters L3
L3
STOR Boss / ORFS Male / STOR Port / ORFS Male - Cross
C
PART NUMBER
A STOR THRD DASH SIZE
081-5604
-8
L2 B B
A STOR THREAD SIZE (in - TPI) 3/4
- 16
B ORFS THRD DASH SIZE
B ORFS THREAD SIZE (in - TPI) 11/16
-6
- 16
C STOR THRD DASH SIZE
-6
C STOR THREAD SIZE (in -TPI) 9/16
- 18
L1 LENGTH (in) (mm)
1.54
39
L2 LENGTH (in) (mm)
1.10
28
L3 LENGTH (in) (mm)
0.98
25
L1
A L2
L2
STOR Boss / ORFS Male / ORFS Male / STOR Port - Cross
C B
B
L1
Adapters
A
230
PART NUMBER
A STOR THRD DASH SIZE
163-6018
-8
A STOR THREAD SIZE (in-TPI) 3/4
- 16
B ORFS THRD DASH SIZE
-6
B ORFS THREAD SIZE (in-TPI) 11/16
- 16
C STOR THRD DASH SIZE
-6
C STOR THREAD SIZE (in-TPI) 11/16
- 16
L1 LENGTH (in) (mm)
1.61
41
L2 LENGTH (in) (mm)
0.98
25
Metric Adapters BSPP Male / JIC 37° Male
PART NUMBER
A BSPP THREAD DASH SIZE
A BSPP THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
6V-3521
-2
1/8
- 28
-4
7/16
- 20
1.38
35 6V-0404
6V-3522
-4
1/4
- 19
-4
7/16
- 20
1.38
35 6V-0405
6V-3523
-6
3/8
- 19
-6
9/16
- 18
1.46
37 6V-0406
6V-3525
-6
3/8
- 19
-8
3/4
- 16
1.54
39 6V-0406
6V-3524
-8
1/2
- 14
-8
3/4
- 16
1.61
41 6V-0407
6V-3526
-8
1/2
- 14
-10
7/8
- 14
1.73
44 6V-0407
8T-2218
-10
5/8
- 14
-10
7/8
- 14
1.93
49 8C-6504
6V-3528
-12
3/4
- 14
-10
7/8
- 14
1.89
48 6V-0408
6V-3527
-12
3/4
- 14
-12
1 1/16 - 12
2.01
51 6V-0408
6V-3529
-16
1 - 11
-16
1 5/16 - 12
2.09
53 6V-0409
B BSPP THREAD DASH SIZE
B BSPP THREAD SIZE (in - TPI)
L BSPP LENGTH DOWTY (in) (mm) SEAL
NOTE: Dowty seal is required with a port connection only.
BSPP Male / BSPP Male
L
A
B
PART NUMBER
A BSPP THREAD DASH SIZE
8U-6275
-12
A BSPP THREAD SIZE (in - TPI) 3/4
- 14
-12
3/4
- 14
L BSPP LENGTH DOWTY (in) (mm) SEAL
1.57
40 6V-0408
NOTE: Dowty seal is required with a port connection only.
BSPP Male / BSPP Female Swivel B
A L
PART NUMBER
A BSPP THREAD DASH SIZE
108-6671
-4
1/4
-6
3/8
108-6672
A BSPP THREAD SIZE (in - TPI)
- 19 - 19
B BSPP THREAD DASH SIZE
B BSPP THREAD SIZE (in - TPI)
L BSPP LENGTH DOWTY (in) (mm) SEAL
-6
3/8
- 19
1.57
40 6V-0405
-6
3/8
- 19
1.77
45 6V-0406
NOTE: Dowty seal is required with a port connection only.
Adapters
231
Metric Adapters A
30°
BSPP Male / BSPP Female Swivel - 90° Elbow
PART NUMBER
A BSPP THREAD DASH SIZE
7X-2611
-8
1/2
- 14
-8
1/2
- 14
1.26
32
1.38
35 6V-0407
-6
3/8
- 19
-6
3/8
- 19
0.98
25
1.22
31 6V-0406
L1
B
7X-2610 L2
A BSPP THREAD SIZE (in - TPI)
B BSPP THREAD DASH SIZE
B BSPP THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 BSPP LENGTH DOWTY (in) (mm) SEAL
NOTE: Dowty seal is required with a port connection only. No seal is required with a BSPP Female Swivel 60° Cone or Spherical Seat.
BSPT Male / JIC 37° Male
L2
PART NUMBER
A BSPT THREAD DASH SIZE
A BSPT THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
8T-2121
-6
3/8
- 19
-6
9/16
- 18
1.50
38
8T-2122
-8
1/2
- 14
-8
3/4
- 16
1.81
46
8T-2123
-12
3/4
- 14
-12
1 1/16 - 12
2.17
55
8T-2124
-16
1 - 11
-16
1 5/16 - 12
2.36
60
L LENGTH (in) (mm)
BSPP Female Swivel / BSPP Female Swivel - 90° Elbow B
PART NUMBER
A BSPP THREAD DASH SIZE
108-6639
-6
30° L1
A
A BSPP THREAD SIZE (in - TPI) 3/8
B BSPP THREAD DASH SIZE
- 19
-8
B BSPP THREAD SIZE (in - TPI) 1/2
- 14
L1 LENGTH (in) (mm)
1.38
35
30°
Adapters
BSPP Female Swivel / JIC 37° Male
PART NUMBER
A BSPP-JIS THREAD DASH SIZE
A BSPP-JIS THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
6V-7622
-2
1/8
- 28
-4
7/16
- 20
1.38
35
6V-7623
-4
1/4
- 19
-4
7/16
- 20
1.50
38
6V-7624
-6
3/8
- 19
-6
9/16
- 18
1.54
39
6V-7626
-6
3/8
- 19
-8
3/4
- 16
1.69
43
6V-7625
-8
1/2
- 14
-8
3/4
- 16
1.73
44
6V-7627
-8
1/2
- 14
-10
7/8
- 14
1.85
47
8T-0022
-10
5/8
- 14
-10
7/8
- 14
1.85
47
6V-7629
-12
3/4
- 14
-10
7/8
- 14
2.09
53
6V-7628
-12
3/4
- 14
-12
1 1/16 - 12
2.17
55
6V-7630
-16
1 - 11
-16
1 5/16 - 12
2.32
59
NOTE: Mates to a BSPP male end with a 60° internal seat angle.
232
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
1.38
35
Metric Adapters JIS 30° Male / STOR Boss
PART NUMBER
A JIS THREAD DASH SIZE
7I-8331
-12
5I-7408
-16
A JIS THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
- 14
-12
1 1/16 - 12
2.01
51
1 - 11
-16
1 5/16 - 12
2.17
55
3/4
L LENGTH (in) (mm)
JIS Metric 30° Female Swivel / JIC 37° Male L
37° B
A
PART NUMBER
A JIS THREAD DASH SIZE
A JIS THREAD SIZE (in - TPI)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
8T-2125
-6
3/8
- 19
-6
9/16
- 18
1.38
35
8T-2126
-8
1/2
- 14
-8
3/4
- 16
1.54
39
8T-2127
-12
3/4
- 14
-12
1 1/16 - 12
1.89
48
8T-2128
-16
1 - 11
-16
1 5/6 - 12
2.01
51
L LENGTH (in) (mm)
Metric 60° Cone Male / JIC 37° Male L
60°
37°
A
B
PART NUMBER
A METRIC TUBE O.D. (in) (mm)
A METRIC THREAD SIZE (dia x pitch)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
6V-4387
0.31
8
M16 x 1.5
-6
9/16
- 18
1.22
31
6V-4388
0.39
10
M18 x 1.5
-8
3/4
- 16
1.34
34
6V-4389
0.51
13
M22 x 1.5
-10
7/8
- 14
1.54
39
1/16
6V-4390
0.63
16
M26 x 1.5
-12
1
- 12
1.61
41
6V-4391
0.79
20
M30 x 1.5
-16
1 5/16 - 12
1.73
44
6V-4392
0.98
25
M38 x 1.5
-20
1 5/8 - 12
1.89
48
6V-4393
1.26
32
M45 x 1.5
-24
1 7/8 - 12
2.01
51
6V-4394
1.65
42
M52 x 1.5
-32
2 1/2 - 12
2.40
61
NOTE: Not recommended for use in a metric port.
Adapters
Metric 30° Female Swivel / JIC 37° Male
PART NUMBER
A METRIC TUBE O.D. (in) (mm)
A METRIC THREAD SIZE (dia x pitch)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
8T-2129
0.31
8
M18 x 1.5
-6
9/16
- 18
1.38
35
8T-2130
0.39
10
M22 x 1.5
-8
3/4
- 16
1.57
40
8T-2131
0.51
13
M24 x 1.5
-12
1 1/16 - 12
1.81
46
8T-2132
0.63
16
M30 x 1.5
-12
1 1/16 - 12
1.93
49
5/16
8T-2133
0.79
20
M33 x 1.5
-16
1
- 12
1.97
50
8T-2219
1.26
32
M36 x 1.5
-20
1 5/8 - 12
2.09
53
8T-2220
1.26
32
M42 x 1.5
-24
1 7/8 - 12
2.44
62
NOTE: Metric connections used primarily on Komatsu machines.
233
Metric Adapters Metric 24° Cone Male - Light & Heavy Duty / JIC 37° Male
L
24° 37°
A
B
PART NUMBER
A METRIC TUBE O.D. (in) (mm)
A METRIC THREAD SIZE (dia x pitch)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
3E-7437
0.39
10
M12 x 1.5
-4
7/16
- 20
1.22
31
6V-4373
0.39
10
M16 x 1.5
-8
3/4
- 16
1.38
35
6V-4374
0.47
12
M18 x 1.5
-8
3/4
- 16
1.38
35
6V-4375
0.59
15
M22 x 1.5
-10
7/8
- 14
1.54
39
6V-4381
1.61
41
M22 x 1.5
-10
7/8
- 14
1.61
41
1/16
6V-4382
0.63
16
M24 x 1.5
-12
1
- 12
1.77
45
6V-4376
0.71
18
M26 x 1.5
-12
1 1/16 - 12
1.69
43
6V-4383
0.79
20
M30 x 2.0
-16
1 5/16 - 12
1.89
48
6V-4377
0.87
22
M30 x 2.0
-16
1 5/16 - 12
1.81
46
6V-4384
0.98
25
M36 x 2.0
-20
1 5/8 - 12
2.05
52
6V-4378
1.10
28
M36 x 2.0
-20
1 5/8 - 12
1.89
48
6V-4385
0.98
25
M42 x 2.0
-24
1 7/8 - 12
2.24
57
6V-4379
1.38
35
M45 x 2.0
-24
1 7/8 - 12
2.09
53
1/2
6V-4386
1.26
32
M52 x 2.0
-32
2
- 12
2.64
67
6V-4380
1.65
42
M52 x 2.0
-32
2 1/2 - 12
2.40
61
NOTE: Not recommended for use in a metric port.
Adapters
Metric Female Swivel - Spherical Seat - Light & Heavy Duty / JIC 37° Male A METRIC TUBE O.D. (in) (mm)
A METRIC THREAD SIZE (dia x pitch)
B JIC THREAD DASH SIZE
B JIC THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
PART NUMBER
NOTE
6V-4396
1
0.39
10
M18 x 1.5
-6
9/16
- 18
1.50
38
6V-4402
1
0.39
10
M18 x 1.5
-8
3/4
- 16
1.61
41
6V-4395
1
0.31
8
M16 x 1.5
-8
3/4
- 16
1.61
41
- 14
1.77
45
- 14
1.81
46
6V-4407
3
0.55
14
M22 x 1.5
-10
7/8
6V-4397
1
0.51
13
M22 x 1.5
-10
7/8
6V-4408
3
0.63
16
M24 x 1.5
-12
1 1/16 - 12
1.93
49
6V-4398
1
0.63
16
M26 x 1.5
-12
1 1/16 - 12
2.05
52
6V-4403
3
0.87
22
M30 x 2.0
-16
1 5/16 - 12
2.09
53
6V-4409
3
0.79
20
M30 x 2.0
-16
1 5/16 - 12
2.09
53
6V-4410
3
0.98
25
M36 x 2.0
-20
1 5/8 - 12
2.28
58
6V-4404
3
1.10
28
M36 x 2.0
-20
1 5/8 - 12
2.28
58
5/8
6V-4399
2
0.98
25
M38 x 1.5
-20
1
- 12
2.40
61
6V-4400
2
1.26
32
M45 x 1.5
-24
1 7/8 - 12
2.60
66
6V-4411
3
0.00
0
M42 x 2.0
-24
1 7/8 - 12
2.60
66
6V-4405
3
1.38
35
M45 x 2.0
-24
1 7/8 - 12
2.60
66
6V-4401
2
1.57
40
M52 x 1.5
-32
2 1/2 - 12
2.87
73
6V-4412
3
1.50
38
M52 x 2.0
-32
2 1/2 - 12
2.87
73
6V-4406
3
1.65
42
M52 x 2.0
-32
2 1/2 - 12
2.91
74
NOTE: 1: Mates to a metric male end with a 60° internal seat angle on an 8, 10, 13, or 16 mm tube or a 24° internal seat angle on a 10, 12, 15, or 18 mm tube. 2: Mates to a metric male end with a 60° internal seat angle only. 3: Mates to a metric male end with a 24° internal seat angle only.
234
Metric Adapters Metric Male / JIC 37° Male 37°
A
B
PART NUMBER
6V-0472
L
A METRIC TUBE O.D. (in) (mm)
0.31
8
A METRIC THREAD SIZE (dia x pitch)
B JIC THREAD DASH SIZE
M14 x 1.5
-6
B JIC THREAD SIZE (in - TPI) 9/16
L LENGTH (in) (mm)
- 18
1.22
31
NOTE: Not recommended for use in a metric port.
Metric Male / NPTF Female
PART NUMBER
5C-7617
0.31
8
A METRIC THREAD SIZE (dia x pitch)
B NPTF THREAD DASH SIZE
M14 - 1.5
-4
B NPTF THREAD SIZE (in - TPI) 1/4
L LENGTH (in) (mm)
- 18
1.30
33
ORFS Male / BSPP Male
L
A
A METRIC TUBE O.D. (in) (mm)
B
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
170-5122
-4
9/16
8I-3633
-6
11/16
8C-6781
-6
11/16
162-0476
-6
136-4098
B BSPP THREAD DASH SIZE
B BSPP THREAD SIZE (in - TPI)
L LENGTH (in) (mm) SEAL
-6
3/8
- 19
1.26
32 6V-0406
- 16
-4
1/4
- 19
1.26
32 6V-0405
- 16
-6
3/8
- 19
1.26
32 6V-0406
11/16
- 16
-6
3/8
- 19
1.34
34 6V-0406
-8
13/16
- 16
-6
3/8
- 19
1.34
34 6V-0406
155-8994
-8
13/16
- 16
-8
1/2
- 14
1.57
40 6V-0407
099-6820
-10
1 - 14
-8
1/2
- 14
1.57
40 6V-0407
162-8711
-10
1 - 14
-8
1/2
- 14
1.57
40 6V-0407
099-6839
-10
1 - 14
-12
3/4
- 14
1.73
44 6V-0408
- 18
-10
1 - 14
-12
- 14
1.69
43 6V-0408
096-4919
-12
1 3/16 - 12
-12
3/4
- 14
1.77
45 6V-0408
086-2746
-12
1 3/16 - 12
-12
3/4
- 14
1.77
45 6V-0408
162-6599
-12
1 3/16 - 12
-16
1 - 11
1.89
48 6V-0409
1R-5395
-16
1 7/16 - 12
-12
- 14
1.85
47 6V-0408
096-6223
-16
1 7/16 - 12
-16
1 - 11
2.05
52 6V-0409
155-8995
-16
1 7/16 - 12
-16
1 - 11
1.97
50 6V-0409
174-5364
-16
1 7/16 - 12
-20
1 1/4 - 11
2.13
54 9X-7423
2.13
54 9X-7423
166-3780
-20
1
11/16
- 12
-20
3/4
1
1/4
- 11
NOTE: For BSPP Port only.
235
Adapters
136-4097
3/4
Metric Adapters B
ORFS Male / BSPP Male - 90° Elbow
L2
PART NUMBER
A ORFS THREAD DASH SIZE
099-7551
-10
1 - 14
-12
3/4
- 14
1.46
37
1.97
50
-12
3/16
-12
3/4
- 14
1.46
37
2.17
55
096-4920
A ORFS THREAD SIZE (in - TPI)
B BSPP THREAD DASH SIZE
1
- 12
B BSPP THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
NOTE: For BSPP Port only.
A
L1
ORFS Male / BSPP Female L
PART NUMBER
A ORFS THREAD DASH SIZE
178-1265
-4
A
B
Adapters
236
9/16
B BSPP THREAD DASH SIZE
- 18
-4
B BSPP THREAD SIZE (in - TPI) 1/4
L LENGTH (in) (mm)
- 19
1.77
ORFS Male / Metric Male
L
A
A ORFS THREAD SIZE (in - TPI)
B
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
169-1577
-4
9/16
- 18
0.24
6
M14 x 1.5
1.18
30
8T-7487
-4
9/16
- 18
0.24
6
M12 x 1.5
1.14
29
123-8828
-4
9/16
- 18
0.24
6
M10 x 1
1.06
27
171-8728
-4
9/16
- 18
0.24
6
M10 x 1
1.02
26
123-7341
-6
11/16
- 16
0.24
6
M12 x 1.5
1.97
50
2U-6826
-6
11/16
- 16
0.24
6
M12 x 1.5
1.22
31
8T-7489
-6
11/16
- 16
0.31
8
M14 x 1.5
1.22
31
8I-6070
-6
11/16
- 16
0.39
10
M14 x 1.5
1.73
44
8T-6725
-6
11/16
- 16
0.39
10
M16 x 1.5
1.34
34
136-8543
-6
11/16
- 16
0.39
10
M16 x 1.5
1.30
33
142-4894
-6
11/16
- 16
0.39
10
M14 x 1.5
1.26
32
171-8678
-6
11/16
- 16
0.39
10
M16 x 1.5
1.26
32
171-8729
-6
11/16
- 16
0.39
10
M10 x 1
1.10
28
119-6407
-6
11/16
- 16
0.39
10
M10 x 1
1.06
27
147-0962
-6
11/16
- 16
1.26
32
M10 x 1
1.18
30
8T-7488
-8
13/16
- 16
0.39
10
M16 x 1.5
1.42
36
8T-7490
-8
13/16
- 16
0.47
12
M18 x 1.5
1.50
38
171-8679
-8
13/16
- 16
0.47
12
M18 x 1.5
1.38
35
171-8677
-8
13/16
- 16
0.47
12
M16 x 1.5
1.38
35
8T-7491
-8
13/16
- 16
0.63
16
M22 x 1.5
1.57
40
8T-7493
-10
1 - 14
0.63
16
M22 x 1.5
1.69
43
8T-7495
-10
1 - 14
0.79
20
M27 x 2.0
1.85
47
8T-7492
-12
0.63
16
M22 x 1.5
1.77
45
13/16
- 12
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
L LENGTH (in) (mm)
45
L2 LENGTH (in) (mm)
Metric Adapters ORFS Male / Metric Male (continued)
L
B
A
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
171-8676
-12
1 3/16 - 12
0.75
19
M22 x 1.5
1.73
44
8T-7494
-12
1 3/16 - 12
0.79
20
M27 x 2.0
1.93
49
8T-7496
-16
1 7/16 - 12
0.98
25
M33 x 2.0
2.05
52
8T-7497
-20
1 11/16 - 12
0.98
25
M33 x 2.0
2.05
52
L LENGTH (in) (mm)
ORFS Male / Metric Male - 90° Elbow
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
169-1576
-4
9/16
- 18
0.24
6
M14 x 1.5
0.94
24
1.46
37
123-8829
-4
9/16
- 18
0.24
6
M10 x 1
0.87
22
1.22
31
7U-9582
-8
13/16
- 16
0.24
6
M27 x 2.0
1.46
37
2.01
51
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
ORFS Male / Metric Female L
PART NUMBER
A ORFS THREAD DASH SIZE
130-6336
-6
A
B
11/16
- 16
B METRIC TUBE O.D. (in) (mm)
0.39
10
B METRIC THREAD SIZE (dia x pitch)
M12 x 1.75
L LENGTH (in) (mm)
1.57
40
ORFS Male Bulkhead / Metric Male
L
B
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
139-6013
-10
1 - 14
0.63
16
M22 x 1.5
2.68
68
144-3054
-12
1 3/16 - 12
0.75
19
M30 x 1.5
2.72
69
145-5843
-16
1 7/16 - 12
0.98
25
M30 x 1.5
2.72
69
Adapters
A
A ORFS THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
237
Metric Adapters STOR Boss / BSPP Male
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B BSPP THREAD DASH SIZE
B BSPP THREAD SIZE (in - TPI)
8T-8897
-12
1 1/16 - 12
-12
3/4
L LENGTH (in) (mm) SEAL
- 14
1.85
47 6V-0408
125-0051
-14
1
- 12
-12
3/4
- 14
1.77
45 6V-0408
7X-2432
-16
1 5/16 - 12
-12
3/4
- 14
1.97
50 6V-0408
4C-6494
-16
1 5/16 - 12
-16
1 - 11
2.05
52 6V-0409
3/16
NOTE: For BSPP Prot Only. Seal is required with a port connection only. No seal is required with a BSPP Female Swivel 60° Cone or Spherical Seat.
STOR Boss / BSPP Female Swivel - Spherical Seat
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B BSPP THREAD DASH SIZE
7X-2612
-16
1 5/16 - 12
-12
4C-6495
1
- 12
-16
3/4
L LENGTH (in) (mm)
- 14
2.36
60
1 - 11
2.44
62
STOR Boss / Metric Male
L
A
-16
5/16
B BSPP THREAD SIZE (in - TPI)
PART NUMBER
A STOR THREAD DASH SIZE
151-5834
-8
A STOR THREAD SIZE (in - TPI) 3/4
- 16
B METRIC TUBE O.D. (in) (mm)
0.47
12
B METRIC THREAD SIZE (dia x pitch)
M22 x 1.5
L LENGTH (in) (mm)
1.46
37
B
Adapters
STOR Boss / Metric Female
238
PART NUMBER
A STOR THREAD DASH SIZE
108-9418
-10
101-1340
-16
A STOR THREAD SIZE (in - TPI) 7/8
- 14
1 5/16 - 12
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
L LENGTH (in) (mm)
0.98
25
M33 x 2.0
2.83
72
0.98
25
M33 x 2.0
1.73
44
Metric Adapters STOR Boss / Metric Female Swivel - Spherical Seat - Light Duty
PART NUMBER
A STOR THREAD DASH SIZE
9X-8264
-6
9/16
- 18
0.31
8
M14 x 1.5
1.50
38
-6
9/16
- 18
0.47
12
M18 x 1.5
1.50
38
9X-8265
A STOR THREAD SIZE (in - TPI)
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
L LENGTH (in) (mm)
STOR Port / Metric Male
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
8T-7859
-4
7/16
- 20
0.24
6
M10 x 1.0
1.34
34 8T-7876
8T-7860
-4
7/16
- 20
0.24
6
M12 x 1.5
1.42
36 6V-9028
6V-8926
-6
9/16
- 18
0.39
10
M10 x 1.0
1.18
30 8T-7876
8T-7861
-6
9/16
- 18
0.39
10
M14 x 1.5
1.46
37 6V-6560
8T-7862
-8
3/4
- 16
0.51
13
M16 x 1.5
1.61
41 8T-6850
8T-7863
-8
3/4
- 16
0.75
19
M18 x 1.5
1.65
42 8T-7524
8T-7864
-10
7/8
- 14
0.47
12
M20 x 1.5
1.81
46 8T-7877
8T-7865
-10
7/8
- 14
0.47
12
M22 x 1.5
1.89
48 6V-7970
8T-7866
-12
1
1/16
- 12
0.39
10
M26 x 1.5
2.05
52 8T-7878
8T-7867
-12
1 1/16 - 12
0.75
19
M27 x 1.5
2.17
55 8T-7525
8T-7868
-16
1 5/16 - 12
0.47
12
M33 x 2.0
2.20
56 8T-7526
L METRIC LENGTH O-RING (in) (mm) SEAL
NOTE: Recommended for use in 1S0 6149 (1E2712) metric ports only. Metric O-Ring Seal is required with a metric port connection.
STOR Port / BSPP Male
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
8T-7908
-4
7/16
- 20
-2
1/8
- 28
1.26
32 6V-0404
8T-7909
-4
7/16
- 20
-4
1/4
- 19
1.42
36 6V-0405
8T-7910
-6
9/16
- 18
-4
1/4
- 19
1.46
37 6V-0405
8T-7911
-6
9/16
- 18
-6
3/8
- 19
1.50
38 6V-0406
8T-7912
-8
3/4
- 16
-6
3/8
- 19
1.57
40 6V-0406
8T-7913
-8
3/4
- 16
-8
1/2
- 14
1.65
42 6V-0407
8T-7914
-10
7/8
- 14
-8
1/2
- 14
1.81
46 6V-0407
8T-7915
-12
-12
3/4
- 14
2.05
52 6V-0408
1/16
B BSPP THREAD SIZE (in - TPI)
L LENGTH (in) (mm) SEAL
8T-7916
-12
1
- 12
-16
1 - 11
2.17
55 6V-0409
8T-7917
-16
1 5/16 - 12
-16
1 - 11
2.17
55 6V-0409
NOTE: Seal is required with a port connection only. No seal is required with a BSPP Female Swivel 60° Cone or Spherical Seat.
239
Adapters
1 1/16 - 12
B BSPP THREAD DASH SIZE
Metric Adapters NPTF Male / Metric Male
PART NUMBER
A NPTF THREAD DASH SIZE
5C-7618
-4
A NPTF THREAD SIZE (in - TPI) 1/4
- 18
B METRIC TUBE O.D. (in) (mm)
0.63
16
B METRIC THREAD SIZE (dia x pitch)
L LENGTH (in) (mm)
M22 x 1.5
1.34
34
JIC 37° Male / Metric Male - 90° Elbow
L2
L3
PART NUMBER
A JIC THREAD DASH SIZE
111-8815
-8
7V-7502
-16
3/4
- 16
1 5/16 - 12
B METRIC TUBE O.D. (in) (mm)
B METRIC THREAD SIZE (dia x pitch)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
0.39
10
M16 x 1.5
1.26
32
1.50
38
0.71
18
M26 x 1.5
1.81
46
1.81
46
NPTF Female / NPTF Male / Metric Male - Tee
PART NUMBER
A NPTF THRD DASH SIZE
115-9791
-4
C
L1 B A
L2
A JIC THREAD SIZE (in - TPI)
L3
A NPTF THREAD SIZE (in - TPI) 1/4
- 18
B NPTF THRD DASH SIZE
B NPTF THREAD SIZE (in-TPI) 1/2
-8
- 14
C METRIC THREAD SIZE (dia x pitch)
(in)
(mm)
(in)
(mm)
(in)
(mm)
M22 x 1.5
0.87
22
1.46
37
1.69
43
L1 LENGTH
L2 LENGTH
L3 LENGTH
Metric Female / ORFS Female Swivel / ORFS Male - Tee C
B Adapters
L1 A
240
PART NUMBER
A METRIC TUBE O.D. in mm
A METRIC THREAD SIZE (dia x pitch)
B-C ORFS THRD DASH SIZE
B-C ORFS THRD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
144-8070
0.28
7
M8 x 1.25
-6
11/16
- 16
0.98
25
1.14
29
0.98
25
117-8032
0.39
10
M12 x 1.5
-6
11/16
- 16
0.79
20
1.14
29
0.98
25
Metric Adapters L2
ORFS Male / ORFS Female Swivel / Metric Female - Tee C
B
A
L1
PART NUMBER
A-B ORFS THREAD DASH SIZE
125-4085
-6
A-B ORFS THREAD SIZE (in - TPI) 11/16
- 16
C METRIC TUBE O.D. (in) (mm)
0.24
6
C METRIC THREAD SIZE (dia x pitch)
M12 x 1.5
L1 LENGTH (in) (mm)
0.98
25
L2 LENGTH (in) (mm)
1.14
29
Adapters
241
NPSM Adapters NPTF Male / NPSM Female Swivel
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
2R-1922
-2
1/8
- 27
-2
1/8
- 27
0.94
24
108-6718
-2
1/8
- 27
-2
1/8
- 27
1.10
28
4D-2560
-2
1/8
- 27
-4
1/4
- 18
1.06
27
9J-7600
-4
1/4
- 18
-2
1/8
- 27
1.18
30
4H-6147
-4
1/4
- 18
-4
1/4
- 18
1.22
31
3L-7055
-4
1/4
- 18
-6
3/8
- 18
1.30
33
2D-0193
-6
3/8
- 18
-4
1/4
- 18
1.30
33
2L-3331
-6
3/8
- 18
-6
3/8
- 18
1.30
33
2D-0058
-6
3/8
- 18
-8
1/2
- 14
1.42
36
6D-6489
-8
1/2
- 14
-6
3/8
- 18
1.57
40
2H-9091
-8
1/2
- 14
-8
1/2
- 14
1.57
40
7D-0702
-8
1/2
- 14
-12
3/4
- 14
1.73
44
3D-8911
-12
3/4
- 14
-8
1/2
- 14
1.57
40
5F-6371
-12
3/4
- 14
-12
3/4
- 14
1.73
44
2N-7308
-12
3/4
- 14
-16
1 - 11 1/2
1.77
45
1L-5987
-16
1 - 11 1/2
-16
1 - 11 1/2
1.97
50
3L-3869
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
2.09
53
113-7099
-24
1 - 11 1/2
-12
1.97
50
2N-1362
-24
1 1/2 - 11 1/2
-20
1 1/4 - 11 1/2
2.13
54
1L-1722
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.17
55
1L-1722
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.17
55
3/4
- 14
L LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
Adapters
NPTF Male / NPSM Female Swivel - 45° Elbow
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
3D-7587
-4
1/4
- 18
-4
1/4
- 18
0.71
18
0.91
23
4D-0582
-6
3/8
- 18
-6
3/8
- 18
1.02
26
0.83
21
3S-8666
-8
1/2
- 14
-4
1/4
- 18
1.34
34
0.83
21
3S-9175
-8
1/2
- 14
-6
3/8
- 18
1.34
34
0.87
22
4D-3734
-8
1/2
- 14
-8
1/2
- 14
1.34
34
0.87
22
4D-6314
-12
3/4
- 14
-8
1/2
- 14
1.50
38
0.87
22
6H-8297
-12
3/4
- 14
-12
3/4
- 14
1.50
38
0.98
25
001-5262
-16
1 - 11 1/2
-16
1 - 11 1/2
1.50
38
1.10
28
004-4977
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.77
45
1.22
31
6L-5955
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
1.97
50
1.34
34
L1 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
242
L2 LENGTH (in) (mm)
NPSM Adapters NPTF Male / NPSM Female Swivel - 90° Elbow
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
4D-6475
-2
1/8
- 27
-2
1/8
- 27
0.98
25
0.67
17
5K-3771
-2
1/8
- 27
-2
1/8
- 27
1.65
42
0.63
16
7K-2094
-2
1/8
- 27
-2
1/8
- 27
3.62
92
0.63
16
4S-7606
-2
1/8
- 27
-4
1/4
- 18
1.02
26
0.79
20
5H-4778
-4
1/4
- 18
-4
1/4
- 18
1.22
31
0.79
20
4D-0124
-4
1/4
- 18
-4
1/4
- 18
2.52
64
0.79
20
1S-0401
-4
1/4
- 18
-6
3/8
- 18
1.50
38
0.94
24
4J-3914
-6
3/8
- 18
-4
1/4
- 18
1.50
38
0.87
22
4D-0577
-6
3/8
- 18
-6
3/8
- 18
1.50
38
0.91
23
2D-8910
-6
3/8
- 18
-8
1/2
- 14
1.57
40
0.98
25
3D-6370
-8
1/2
- 14
-4
1/4
- 18
1.77
45
0.94
24
9D-3351
-8
1/2
- 14
-6
3/8
- 18
1.77
45
0.98
25
3D-8913
-8
1/2
- 14
-6
3/8
- 18
1.77
45
0.98
25
9D-3352
-8
1/2
- 14
-8
1/2
- 14
1.77
45
0.98
25
2H-3940
-8
1/2
- 14
-8
1/2
- 14
1.77
45
0.98
25
7D-0477
-8
1/2
- 14
-12
3/4
- 14
2.01
51
1.18
30
003-7030
-12
3/4
- 14
-6
3/8
- 18
2.01
51
1.10
28
2L-8228
-12
3/4
- 14
-8
1/2
- 14
2.01
51
1.14
29
2H-3939
-12
3/4
- 14
-12
3/4
- 14
2.01
51
1.22
31
159-1691
-12
3/4
- 14
-16
1.38
35
2.20
56
004-3935
-16
1 - 11 1/2
2.32
59
1.38
35
3H-9690
-16
1 - 11
1/2
-16
2.36
60
1.38
35
004-3802
-16
1 - 11 1/2
-20
1 1/4 - 11 1/2
2.52
64
1.57
40
2L-7070
-20
1 1/4 - 11 1/2
-20
1 1/4 - 11 1/2
2.56
65
1.57
40
8X-6293
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.52
64
1.77
45
1L-0766
-24
1 1/2 - 11 1/2
-24
1 1/2 - 11 1/2
2.80
71
1.73
44
-12
B NPSM THREAD SIZE (in - TPI)
1 - 11 1/2 3/4
- 14
1 - 11
1/2
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
NPTF Female / NPSM Female Swivel
PART NUMBER
A NPTF THREAD DASH SIZE
3D-9253
-2
1/8
- 27
-2
1/8
- 27
0.87
22
7D-0215
-2
1/8
- 27
-4
1/4
- 18
1.06
27
2J-4211
-4
1/4
- 18
-4
1/4
- 18
1.22
31
4D-0513
-6
3/8
- 18
-6
3/8
- 18
1.30
33
8M-0792
-8
1/2
- 14
-8
1/2
- 14
1.50
38
7F-7807
-16
1.97
50
1 - 11 1/2
B NPSM THREAD DASH SIZE
-16
B NPSM THREAD SIZE (in - TPI)
1 - 11 1/2
L LENGTH (in) (mm)
Adapters
A NPTF THREAD SIZE (in - TPI)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
243
NPSM Adapters NPTF Female / NPSM Female Swivel - 45° Elbow
PART NUMBER
A NPTF THREAD DASH SIZE
4D-6585
-4
1/4
- 18
-4
1/4
- 18
0.91
23
0.71
18
-6
3/8
- 18
-6
3/8
- 18
0.79
20
0.83
21
4D-2016
A NPTF THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
NPTF Female / NPSM Female Swivel - 90° Elbow
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
4D-4267
-4
1/4
- 18
-4
1/4
- 18
0.94
24
0.79
20
2D-8912
-6
3/8
- 18
-8
1/2
- 14
1.22
31
0.98
25
2L-3622
-8
1/2
- 14
-8
1/2
- 14
1.22
31
0.98
25
6V-9013
-24
2.24
57
1.61
41
1 1/2 - 11 1/2
B NPSM THREAD DASH SIZE
-24
B NPSM THREAD SIZE (in - TPI)
1 1/2 - 11 1/2
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
NPTF Female Swivel / NPSM Female
PART NUMBER
A NPTF THREAD DASH SIZE
1L-2702
-12
A NPTF THREAD SIZE (in - TPI) 3/4
- 14
B NPSM THREAD DASH SIZE
-12
B NPSM THREAD SIZE (in - TPI) 3/4
- 14
L LENGTH (in) (mm)
1.61
41
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
Adapters
NPTF Female Swivel / NPSM Female - 90° Elbow
PART NUMBER
A NPTF THREAD DASH SIZE
5D-0269
-2
1L-4762
-16
A NPTF THREAD SIZE (in - TPI) 1/8
- 27
1 - 11 1/2
B NPSM THREAD DASH SIZE
-2 -16
B NPSM THREAD SIZE (in - TPI) 1/8
- 27
1 - 11 1/2
L1 LENGTH (in) (mm)
0.71
18
0.71
18
1.38
35
1.73
44
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
244
L2 LENGTH (in) (mm)
NPSM Adapters L
A 45°
ORFS Male / NPSM Male
PART NUMBER
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
109-7596
-12
1 3/16 - 12
-16
1 - 11 1/2
B 45°
L LENGTH (in) (mm)
2.36
60
STOR Boss / NPSM Female Swivel
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
4D-6534
-4
7/16
- 20
-4
1/4
- 18
1.02
26
6D-4529
-5
1/2
- 20
-4
1/4
- 18
1.02
26
6D-1891
-6
9/16
- 18
-4
1/4
- 18
1.10
28
6D-4095
-6
9/16
- 18
-6
3/8
- 18
1.14
29
6D-2784
-8
3/4
- 16
-8
1/2
- 14
1.26
32
5P-0234
-8
3/4
- 16
-12
3/4
- 14
1.42
36
8J-3705
-10
7/8
- 14
-8
1/2
- 14
1.30
33
8D-7276
-10
7/8
- 14
-12
3/4
- 14
1.46
37
6D-4492
-12
1 1/16 - 12
-8
1/2
- 14
1.50
38
6D-6081
-12
1 1/16 - 12
-12
3/4
- 14
1.57
40
7L-7280
-16
1 5/16 - 12
-16
1.61
41
1 - 11 1/2
L LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
STOR Boss / NPSM Female Swivel - 45° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
5P-7915
-4
7/16
- 20
-4
1/4
- 18
0.98
25
0.71
18
5P-7916
-6
9/16
- 18
-4
1/4
- 18
1.14
29
0.67
17
5P-7917
-6
9/16
- 18
-6
3/8
- 18
1.06
27
0.83
21
6V-0468
-8
3/4
- 16
-6
3/8
- 18
1.10
28
0.75
19
5P-7918
-8
3/4
- 16
-8
1/2
- 14
1.30
33
0.87
22
5P-7919
-10
7/8
- 14
-8
1/2
- 14
1.54
39
0.83
21
030-7976
-12
1 1/16 - 12
-12
3/4
- 14
1.50
38
0.98
25
5P-7920
-16
1 5/16 - 12
-16
1.65
42
1.10
28
L2 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
245
Adapters
1 - 11 1/2
L1 LENGTH (in) (mm)
NPSM Adapters STOR Boss / NPSM Female Swivel - 90° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
5P-7981
-4
7/16
- 20
-4
1/4
- 18
1.10
28
0.79
20
5P-7982
-6
9/16
- 18
-4
1/4
- 18
1.30
33
0.91
23
030-6817
-6
9/16
- 18
-6
3/8
- 18
1.30
33
0.94
24
5P-7983
-6
9/16
- 18
-6
3/8
- 18
2.40
61
0.91
23
030-6818
-8
3/4
- 16
-6
3/8
- 18
1.50
38
0.94
24
6V-8549
-8
3/4
- 16
-8
1/2
- 14
1.50
38
0.98
25
030-6819
-8
3/4
- 16
-12
3/4
- 14
1.65
42
1.18
30
030-7977
-10
7/8
- 14
-8
1/2
- 14
1.69
43
0.98
25
1W-7534
-10
7/8
- 14
-8
1/2
- 14
1.69
43
0.98
25
6V-4363
-10
7/8
- 14
-12
3/4
- 14
1.77
45
1.22
31
030-7978
-12
1 1/16 - 12
-12
3/4
- 14
1.93
49
1.18
30
5P-7984
-16
1 5/16 - 12
-12
3/4
- 14
2.09
53
1.30
33
030-7979
-16
1 5/16 - 12
-16
1 - 11 1/2
2.09
53
1.38
35
-20
1/4
2.40
61
1.57
40
030-7980
A STOR THREAD SIZE (in - TPI)
-20
1
5/8
B NPSM THREAD DASH SIZE
- 12
B NPSM THREAD SIZE (in - TPI)
1
- 11
L1 LENGTH (in) (mm)
1/2
L2 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
NPSM Female Swivel / NPSM Female Swivel / NPSM Female Swivel - Tee
PART NUMBER
A NPSM THREAD DASH SIZE
4D-9976
-4
1/4
-12
3/4
004-7131
A NPSM THREAD SIZE (in - TPI)
- 18 - 14
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
C NPSM THREAD DASH SIZE
C NPSM THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
1/4
- 18
-4
1/4
- 18
0.79
20
0.83
21
-12
3/4
- 14
-12
3/4
- 14
1.18
30
1.22
31
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
L2
L2 C
B
Adapters
30°
NPTF Male / NPSM Female Swivel / NPSM Female Swivel Tee
L1 A
PART NUMBER
A NPTF THREAD DASH SIZE
A NPTF THREAD SIZE (in - TPI)
3S-6115
-4
1/4
7J-5996
-6
3/8
003-6997
-8
1/2
4D-0583
-12
3/4
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in - TPI)
-4
1/4
- 18
-6
3/8
- 14
-4
1/4
- 14
-8
1/2
- 18
C NPSM THREAD DASH SIZE
C NPSM THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
-4
1/4
- 18
1.22
31
0.83
21
- 18
-6
3/8
- 18
1.50
38
0.91
23
- 18
-8
1/4
- 18
1.77
45
0.94
24
- 14
-8
1/2
- 14
2.01
51
1.10
28
- 18
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
246
L2 LENGTH (in) (mm)
NPSM Adapters L2
L2
NPTF Female / NPSM Female Swivel / NPSM Female Swivel Tee
B
C
PART NUMBER
A NPTF THREAD DASH SIZE
4D-4917
-8
L1 A 30° ±1°
A NPTF THREAD SIZE (in - TPI) 1/2
- 14
B NPSM THREAD DASH SIZE
-8
B NPSM THREAD SIZE (in - TPI) 1/2
- 14
C NPSM THREAD DASH SIZE
C NPSM THREAD SIZE (in -TPI) 1/2
-8
- 14
L1 LENGTH (in) (mm)
1.81
46
L2 LENGTH (in) (mm)
0.98
25
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
L2
L2 C
B 30°
STOR Boss / NPSM Female Swivel / NPSM Female Swivel Tee
PART NUMBER
A STOR THREAD DASH SIZE
5P-7929
-6
9/16
-8
3/4
L1
A
5P-7930
A STOR THREAD SIZE (in-TPI)
- 18 - 16
B NPSM THREAD DASH SIZE
B NPSM THREAD SIZE (in-TPI)
C NPSM THREAD DASH SIZE
C NPSM THREAD SIZE (in-TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
-4
1/4
- 18
-4
1/4
- 18
1.30
33
0.87
22
-8
1/2
- 14
-8
1/2
- 14
1.50
38
1.06
27
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
L3
L4
C
B
NPTF Male / NPSM Female Swivel / NPSM Female Swivel / NPSM Female Swivel - Cross
L2
L1
D
PART NUMBER
A NPTF THREAD DASH SIZE
6D-6018
-4
1/4
- 18
-4
1/4
- 18
1.22
31
0.79
20
0.83
21
0.83
21
-8
1/2
- 14
-8
1/2
- 14
1.77
45
0.98
25
1.10
28
1.10
28
6V-0581
A
A NPTF THREAD SIZE (in - TPI)
B-D NPSM THREAD DASH SIZE
B-D NPSM THREAD SIZE (in - TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
L4 LENGTH (in) (mm)
NOTE: NPSM Adapters are intended for use only in low pressure systems with hose assemblies having pipe thread couplings.
Adapters
247
Miscellaneous Adapters L
STOR Boss / STOR Port
PART NUMBER
A STOR THREAD DASH SIZE
164-7900
-4
7/16
- 20
-4
7/16
- 20
2.24
57
4I-0899
-4
7/16
- 20
-6
9/16
- 18
1.34
34
8C-7325
-4
7/16
- 20
-8
3/4
- 16
1.26
32
8T-9357
-5
1/2
- 20
-4
7/16
- 20
1.06
27
5P-1318
-5
1/2
- 20
-6
9/16
- 18
1.26
32
136-0853
-6
9/16
- 18
-3
3/8
- 24
0.98
25
5P-9617
-6
9/16
- 18
-4
7/16
- 20
1.02
26
9X-2650
-6
9/16
- 18
-4
7/16
- 20
4.17
106
8J-9990
-6
9/16
- 18
-6
9/16
- 18
1.30
33
7W-7381
-6
9/16
- 18
-6
9/16
- 18
1.34
34
108-7507
-6
9/16
- 18
-6
9/16
- 18
1.46
37
5P-8874
-6
9/16
- 18
-8
3/4
- 16
1.38
35
087-4566
-6
9/16
- 18
-8
3/4
- 16
1.57
40
100-7870
-6
9/16
- 18
-8
3/4
- 16
1.97
50
159-4587
-8
3/4
- 16
-3
3/8
- 24
1.02
26
3P-1932
-8
3/4
- 16
-4
7/16
- 20
0.79
20
5P-4674
-8
3/4
- 16
-5
1/2
- 20
0.75
19
5P-6944
-8
3/4
- 16
-6
9/16
- 18
1.06
27
9T-8620
-8
3/4
- 16
-6
9/16
- 18
1.10
28
1U-3176
-8
3/4
- 16
-6
9/16
- 18
1.26
32
8T-5879
-8
3/4
- 16
-8
3/4
- 16
1.06
27
159-5255
-8
3/4
- 16
-8
3/4
- 16
1.34
34
8T-1715
-8
3/4
- 16
-8
3/4
- 16
1.77
45
9X-2493
-8
3/4
- 16
-8
3/4
- 16
2.05
52
8K-4739
-10
7/8
- 14
-4
7/16
- 20
0.94
24
157-3656
-10
7/8
- 14
-6
9/16
- 18
0.79
20
5P-1404
-10
7/8
- 14
-6
9/16
- 18
0.83
21
6V-2606
-10
7/8
- 14
-6
9/16
- 18
0.94
24
7Y-8419
-10
7/8
- 14
-6
9/16
- 18
1.50
38
5P-1042
-10
7/8
1.69
43
5P-4499
-12
1 1/16 - 12
-4
7/16
- 20
1.06
27
6P-4975
-12
1 1/16 - 12
-4
7/16
- 20
1.10
28
2P-8421
-12
1 1/16 - 12
-6
9/16
- 18
1.06
27
5G-4741
-12
1 1/16 - 12
-6
9/16
- 18
1.14
29
8C-8410
-12
1 1/16 - 12
-8
3/4
- 16
0.94
24
6V-1722
-12
1 1/16 - 12
-8
3/4
- 16
1.02
26
5P-1716
-12
1 1/16 - 12
-8
3/4
- 16
1.14
29
B
Adapters
A
248
A STOR THREAD SIZE (in - TPI)
- 14
1/16
B STOR THREAD DASH SIZE
-12
B STOR THREAD SIZE (in - TPI)
1
1/16
- 12
L LENGTH (in) (mm)
117-0473
-12
1
- 12
-8
3/4
- 16
1.22
31
9T-0975
-12
1 1/16 - 12
-8
3/4
- 16
1.54
39
5P-2211
-12
1 1/16 - 12
-10
7/8
- 14
1.61
41
8X-7851
-12
1 1/16 - 12
-12
1 1/16 - 12
1.93
49
3T-4965
-12
1 1/16 - 12
-12
1 1/16 - 12
2.17
55
6V-5258
-12
1 1/16 - 12
-16
1 5/16 - 12
1.89
48
9J-0477
-14
1 3/16 - 12
-5
1/2
- 20
1.34
34
6V-3510
-14
1 3/16 - 12
-6
9/16
- 18
1.10
28
- 18
1.46
37
- 16
1.06
27
3/16
155-5514
-14
1
- 12
-6
9/16
107-1341
-14
1 3/16 - 12
-8
3/4
Miscellaneous Adapters L
STOR Boss / STOR Port (continued)
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
101-7198
-14
1 3/16 - 12
-12
1 1/16 - 12
B A
2.09
53
8D-8428
-16
1
- 12
-4
7/16
- 20
1.10
28
9T-5212
-16
1 5/16 - 12
-6
9/16
- 18
0.71
18
8J-0426
-16
1 5/16 - 12
-6
9/16
- 18
1.10
28
8J-3830
-16
1 5/16 - 12
-6
9/16
- 18
1.65
42
5/16
5/16
6C-7913
-16
1
- 12
-6
9/16
- 18
1.85
47
6E-3184
-16
1 5/16 - 12
-6
9/16
- 18
1.93
49
122-0957
-16
1 5/16 - 12
-8
3/4
- 16
0.87
22
5P-5777
-16
1 5/16 - 12
-8
3/4
- 16
0.98
25
131-5681
-16
1 5/16 - 12
-10
7/8
- 14
1.46
37
6V-0301
-16
1 5/16 - 12
-12
1 1/16 - 12
1.77
45
6Y-0567
-16
1 5/16 - 12
-12
1 1/16 - 12
5.59
142
8C-3051
-16
1 5/16 - 12
-16
1 5/16 - 12
2.56
65
5/16
5/16
9W-7785
-16
1
- 12
-16
1
- 12
2.60
66
1U-8302
-16
1 5/16 - 12
-16
1 5/16 - 12
3.74
95
9T-6865
-20
1 5/16 - 12
-4
7/16
- 20
1.22
31
6E-3819
-20
1 5/8 - 12
-4
7/16
- 20
2.36
60
9J-8677
-20
1 5/8 - 12
-6
9/16
- 18
0.94
24
8J-6307
-20
1 5/8 - 12
-6
9/16
- 18
1.18
30
8J-5914
-20
1 5/8 - 12
-6
9/16
- 18
1.18
30
5P-8905
-20
1 5/8 - 12
-8
3/4
- 16
1.02
26
3/4
- 16
5/8
6E-4513
-20
1
- 12
-8
1.34
34
3T-9549
-20
1 5/8 - 12
-12
1 1/16 - 12
0.94
24
4S-6679
-20
1 5/8 - 12
-12
1 1/16 - 12
0.98
25
7X-2470
-20
1 5/8 - 12
-16
1 5/16 - 12
0.98
25
1U-1577
-24
1 7/8 - 12
-6
9/16
- 18
1.93
49
5P-3903
-24
1 7/8 - 12
-8
3/4
- 16
1.30
33
6E-4514
-24
1 7/8 - 12
-8
3/4
- 16
1.34
34
8V-7764
-24
1 7/8 - 12
-16
1.30
33
1/2
1 5/16 - 12 1/16
5P-2231
-32
2
- 12
-12
1
- 12
1.42
36
3V-7750
-32
2 1/2 - 12
-24
1 7/8 - 12
1.42
36
STOR Boss / STOR Port - 45° Elbow
L-2
L-1
PART NUMBER
A STOR THREAD DASH SIZE
6V-8077
-6
A STOR THREAD SIZE (in - TPI) 9/16
- 18
B STOR THREAD DASH SIZE
-6
B STOR THREAD SIZE (in - TPI) 9/16
- 18
Adapters
B
L LENGTH (in) (mm)
L1 LENGTH (in) (mm)
1.10
28
L2 LENGTH (in) (mm)
0.91
23
A
249
Miscellaneous Adapters STOR Boss / STOR Port - 90° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
124-8909
-4
7/16
- 20
-4
7/16
- 20
1.26
32
0.91
23
6V-3305
-5
1/2
- 20
-5
1/2
- 20
1.22
31
0.91
23
8C-6712
-6
9/16
- 18
-4
7/16
- 20
1.26
32
0.83
21
085-7356
-6
9/16
- 18
-6
9/16
- 18
1.65
42
0.63
16
6V-8076
-6
9/16
- 18
-6
9/16
- 18
1.34
34
0.94
24
8T-0119
-8
3/4
-8
3/4
- 16
1.57
40
1.26
32
8T-3491
-12
2.01
51
1.30
33
- 16
1 1/16 - 12
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
1 1/16 - 12
-12
L1 LENGTH (in) (mm)
STOR Boss / STOR Port Swivel
L
PART NUMBER
A STOR THREAD DASH SIZE
8T-2362
-3
3/8
-4
7/16
8T-2353
A
A STOR THREAD SIZE (in - TPI)
A STOR THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
- 24 - 20
B STOR THREAD SIZE (in - TPI)
L LENGTH (in) (mm)
-4
7/16
- 20
1.18
30
-6
9/16
- 18
1.18
30
B
STOR Boss / SAE Code 61 Flange
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B SAE HEAD SIZE (in) (mm)
B SAE FLANGE DASH SIZE
9U-7442
-16
1 5/16 - 12
30.10
30.1
-8
4.84
123
9U-7443
-16
1 5/16 - 12
38.10
38.1
-12
5.04
128
9U-7444
-16
1 5/16 - 12
44.50
44.5
-16
5.04
128
9U-7445
-16
1 5/16 - 12
50.80
50.8
-20
5.28
134
9U-7446
-16
1 5/16 - 12
60.30
60.3
-24
5.55
141
L LENGTH (in) (mm)
Adapters
STOR Boss / SAE Code 62 Flange
250
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B SAE HEAD SIZE (in) (mm)
B SAE FLANGE DASH SIZE
9U-7438
-16
1 5/16 - 12
41.30
41.3
-12
5.47
139
1U-8292
-16
1 5/16 - 12
47.60
47.6
-16
3.39
86
7X-2430
-16
1 5/16 - 12
47.60
47.6
-16
3.15
80
9U-7439
-16
1 5/16 - 12
47.60
47.6
-16
5.39
137
7X-2608
-16
1 5/16 - 12
54.00
54.0
-20
3.74
95
9U-7440
-16
1 5/16 - 12
54.00
54.0
-20
5.67
144
9U-7441
-16
1 5/16 - 12
63.50
63.5
-24
5.91
150
L LENGTH (in) (mm)
L2 LENGTH (in) (mm)
Miscellaneous Adapters STOR Boss / STOR Boss
L
B
A
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
108-5678
-4
7/16
- 20
-4
7/16
- 20
1.38
35
6V-0467
-8
3/4
- 16
-8
3/4
- 16
1.38
35
6V-5320
-8
3/4
- 16
-8
3/4
- 16
1.57
40
8C-3178
-8
3/4
- 16
-8
3/4
- 16
2.36
60
5R-6952
-8
3/4
- 16
-8
3/4
- 16
3.78
96
1/16
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
1/16
L LENGTH (in) (mm)
6Y-2349
-12
1
- 12
-12
1
- 12
1.65
42
8C-9029
-16
1 5/16 - 12
-16
1 5/16 - 12
1.97
50
113-4676
-16
1 5/16 - 12
-16
1 5/16 - 12
2.64
67
8C-9026
-16
1 5/16 - 12
-24
1 7/8 - 12
2.40
61
STOR Boss / STOR Boss - 45° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
9X-8403
-4
8C-9028
-16
A STOR THREAD SIZE (in - TPI) 7/16
1
- 20
5/16
- 12
B STOR THREAD DASH SIZE
-6 -16
B STOR THREAD SIZE (in - TPI) 9/16
- 18
1 5/16 - 12
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
0.63
16
1.30
33
1.42
36
2.20
56
STOR Boss / STOR Boss - 90° Elbow
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
117-0067
-4
7/16
- 20
-4
7/16
- 20
0.75
19
1.06
27
3E-2332
-4
7/16
- 20
-6
9/16
- 18
0.98
25
1.26
32
6V-0484
-6
9/16
- 18
-6
9/16
- 18
1.26
32
0.83
21
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
Adapters
STOR Port / STOR Port
15°±1°
B
PART NUMBER
A STOR THREAD DASH SIZE
A STOR THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
176-5868
-12
1 1/16 - 12
-12
1 1/16 - 12
A
L LENGTH (in) (mm)
1.97
50
L
251
Miscellaneous Adapters SAE 45° Male / STOR Boss
PART NUMBER
A SAE THREAD DASH SIZE
A SAE THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
7X-0902
-6
5/8
- 18
-6
9/16
- 18
1.34
34
107-9343
-8
3/4
- 16
-6
9/16
- 18
1.50
38
8C-3120
-10
7/8
- 14
-6
9/16
- 18
1.69
43
9X-6650
-10
7/8
- 14
-8
3/4
- 16
1.73
44
L LENGTH (in) (mm)
SAE 45° Male / STOR Boss - 90° Elbow
A
PART NUMBER
A SAE THREAD DASH SIZE
A SAE THREAD SIZE (in - TPI)
B STOR THREAD DASH SIZE
B STOR THREAD SIZE (in - TPI)
109-5169
-6
5/8
- 18
-6
9/16
- 18
1.02
26
1.10
28
120-6726
-8
3/4
- 16
-6
9/16
- 18
1.22
31
1.54
39
8T-2161
-10
7/8
- 14
-6
9/16
- 18
1.50
38
1.46
37
103-4675
-10
7/8
- 14
-8
3/4
- 16
1.46
37
1.54
39
SAE 45° Straight Thread / Barb
B
PART NUMBER
9U-6992
L
A SAE THREAD SIZE (in-TPI) 7/8
- 14
B BARB O.D. (in) (mm)
0.75
19
9U-6993
1 1/16 - 12
0.98
25
9U-6994
1 5/16 - 12
0.98
25
5/8
9U-6995
1
- 12
1.26
32
9U-6996
1 7/8 - 12
1.50
38
NOTE: Buna "N" - 70 Durometer. O-Ring included with fitting.
Adapters
B
SAE 45° Straight Thread / Barb - 90° Elbow
L2
A L1
PART NUMBER
A SAE THREAD SIZE (in-TPI)
9U-6998
1 1/16 - 12
9U-6997
7/8
- 14
B BARB O.D. (in) (mm)
0.39
10
0.98
25
9U-6999
1 5/16 - 12
0.98
25
9U-7000
1 5/8 - 12
1.26
32
NOTE: Buna "N" - 70 Durometer. O-Ring included with fitting.
252
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
Miscellaneous Adapters STOR Boss / STOR Port / STOR Port - Tee
PART NUMBER
A STOR THRD DASH SIZE
A STOR THREAD SIZE (in - TPI)
8C-8431
-6
9/16
6V-1625
-6
9/16
142-7620
-10
7/8
1U-8303
-16
B STOR THRD DASH SIZE
B STOR THREAD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-6
9/16
- 18
-6
9/16
- 18
1.61
41
0.98
25
0.98
25
- 18
-6
9/16
- 18
-8
3/4
- 16
1.38
35
0.83
21
0.83
21
- 14
-6
9/16
- 18
-8
3/4
- 16
2.01
51
0.94
24
1.46
37
-6
9/16
- 18
-16
1.89
48
1.34
34
1.65
42
- 18
1 5/16 - 12
1 5/16 - 12
STOR Port / STOR Boss / STOR Port - Tee
PART NUMBER
A STOR THRD DASH SIZE
4I-0900
-6
9/16
-6
9/16
105-7704
L2
L3
L1
- 18 - 18
B STOR THRD DASH SIZE
B STOR THREAD SIZE (in - TPI)
C STOR THRD DASH SIZE
C STOR THREAD SIZE (in -TPI)
L1 LENGTH (in) (mm)
L2 LENGTH (in) (mm)
L3 LENGTH (in) (mm)
-6
9/16
- 18
-4
7/16
- 20
0.67
17
1.54
39
0.79
20
-8
3/4
- 16
-6
9/16
- 18
1.10
28
1.61
41
1.10
28
STOR Port / STOR Port / ORFS Male - Tee C
B
A STOR THREAD SIZE (in - TPI)
PART NUMBER
A STOR THRD DASH SIZE
122-1852
-8
A STOR THREAD SIZE (in - TPI) 3/4
- 16
B STOR THRD DASH SIZE
-8
B STOR THREAD SIZE (in - TPI) 3/4
- 16
C ORFS THRD DASH SIZE
-6
C ORFS THREAD SIZE (in -TPI) 11/16
- 16
L1 LENGTH (in) (mm)
1.57
40
L2 LENGTH (in) (mm)
0.91
23
L3 LENGTH (in) (mm)
1.26
32
A
Adapters
253
Swivel and Bulkhead Nuts JIC 37° Swivel Nut
L
A
B
PART NUMBER
A JIC THREAD DASH SIZE
8L-3161
-4
7/16
- 20
0.63
16
001-7014
-5
1/2
- 20
0.67
17
3R-4437
-6
9/16
- 18
0.71
18
1P-1441
-8
3/4
- 16
0.83
21
5H-0275
-10
7/8
- 14
0.98
25
8M-0744
-12
1
1/16
- 12
1.02
26
6S-2898
-14
1 3/16 - 12
1.06
27
1P-0043
-16
1 5/16 - 12
1.10
28
2P-8148
-20
1 5/8 - 12
1.22
31
PART NUMBER
A JIC THREAD DASH SIZE
5B-3254
A JIC THREAD SIZE
B THICKNESS (in) (mm)
-4
7/16
- 20
0.24
6
2P-1280
-5
1/2
- 20
0.24
6
2P-1279
-6
9/16
- 18
0.28
7
7F-2050
-8
3/4
- 16
0.31
8
7F-2060
-10
7/8
- 14
0.35
9
6K-8420
-12
1 1/16 - 12
0.39
10
2P-1286
-16
1 5/16 - 12
0.39
10
0.39
10
2V-2043
-20
1
5/8
- 12
ORFS Swivel Nut - Plated
L
PART NUMBER
A Adapters
L LENGTH (in) (mm)
JIC 37° Bulkhead Nut
A
254
A JIC THREAD SIZE
A ORFS THREAD DASH SIZE
A ORFS THREAD SIZE 13/16
- 16
L LENGTH (in) (mm)
9X-6582
-8
0.83
21
9X-6581
-10
1 - 14
0.94
24
9X-6580
-12
1
3/16
- 12
1.02
26
9X-6579
-16
1 7/16 - 12
1.10
28
9X-6578
-20
1 11/16 - 12
1.10
28
Swivel and Bulkhead Nuts ORFS Swivel Nut - Non-Plated
L
A
B
A
B
PART NUMBER
A ORFS THREAD DASH SIZE
6V-8552
-4
9/16
- 18
0.59
15
6V-8553
-6
11/16
- 16
0.67
17
6V-8554
-8
13/16
- 16
0.83
21
6V-8555
-10
1 - 14
0.94
24
6V-8556
-12
1 3/16 - 12
1.02
26
A ORFS THREAD SIZE
7/16
L LENGTH (in) (mm)
6V-8557
-16
1
- 12
1.10
28
6V-8558
-20
1 11/16 - 12
1.10
28
8T-1681
-24
2 - 12
1.10
28
ORFS Bulkhead Nut
PART NUMBER
A ORFS THREAD DASH SIZE
6V-9168
-6
11/16
- 16
0.31
6V-9169
-8
13/16
- 16
0.35
9
6V-9170
-10
1 - 14
0.39
10
6V-9172
-16
1 7/16 - 12
0.39
10
6V-9173
-20
1 11/16 - 12
0.39
10
A ORFS THREAD SIZE
B THICKNESS (in) (mm)
8
STOR Bulkhead Nut PART NUMBER
A THREAD DASH SIZE
9X-6395
-8
9X-6394
-12
A THREAD SIZE (in - TPI) 3/4
- 16
1 1/16 - 12
B THICKNESS (in) (mm)
0.39
10
0.51
13
A
Adapters
255
Adapters
Swivel and Bulkhead Nuts
256
Caps / Plugs Protective Caps and Plugs................................................................................................. 258 Metal Caps and Plugs........................................................................................................ 262
Caps / Plugs
257
-2
Pi pe NP TF SM Fe Fe ma m le al Pi St e pe r Pi JI ai pe C gh 37 t ° Th M re al ad e OJI C Ri 37 ng °F Bo em ss al e SA Sw E iv 45 el ° M al e SA E 45 ° Inv er te SA d E M 45 al °F eS em wi ve al l e SA S E wi 45 ve ° l Inv er te SA d E Fe Co m de al e 61 Sw Fl iv SA a el ng Ca E C e te od rp e ill 6 ar 2 Fl Fla an ng OR ge e FS Fe m al e Sw iv el NP
Thread Dash Size
NP TF
M
al
e
Caps / Plugs
Protective Caps and Plugs
9U-7069 179-4455
-3 -4
179-4467 179-4468
179-4434 179-4477 179-4477
9U-7071 179-4456 179-4435 179-4523 179-4435 179-4436 179-4523 179-4523
-5
179-4437 179-4469 179-4437 179-4437 179-4469 179-4469
-6
179-4460 179-4457 4C-9521 179-4470 179-4438 179-4438 179-4471 179-4471
-8
179-4461 179-4458 7C-6466 125-1373 7C-6466
-10 -12
179-4524 179-4525
6V-1822 125-1373 125-1373 179-4491 179-4445 179-4526
7C-6465 179-7380 7C-6465 7M-7644 179-7380 179-7380 179-4492 179-4462 179-4459 179-4440 179-4472 179-4440
-14
179-4527
179-4472 179-4472 243-5685 179-4450 179-4528
179-4441 179-4474
-15 -16
179-4463 7C-7811 179-4442 2P-0470
179-4493 179-4451 179-4529
179-4464 9U-7085 179-4443 179-4475
179-4494 179-4452 179-4530
179-4465 9U-7088
219-7003
179-4495 179-4453 179-4531
179-4466 9U-7090
179-4476
179-4496 179-4454
-18 -20 -22 -24 -26 -28 -30 -32 -34 -36 -40
179-4497
-42 -45 -48
179-4498
-52 NOTE: The caps and plugs listed above are intended to be used in a protective application only. Do not use these items to plug or cap a pressurized opening of any kind. Using the protective cap or plug to cover a pressurized opening may result in serious injury. These protective caps and plugs are the best way to prevent contamination from entering the hose assembly. They should not be removed until the hose assembly has been routed and ready for final connection.
258
M et ric
Caps / Plugs
Thread Dash Size
St an dp M ip e M etri et c ric 24 24 ° C ° C on M on e M e e M tri et c M ale ric Fe a -H Fe ma le-L ea ig vy m le al S ht D M e wi Du uty e S ve M tri w ty et c ive l-S ric Fe p l Sp he Fe ma he ric m le a ric al S le w JI al Se Sw ive BS S 6 Se at l i 0 ve S PP ° at W/ p l C - H O60 on Sp he ea Rin °C e he ric vy g ric al on Ma S JI Du - H al e e le Sa ty ea S M BS ea t W al vy t- /O PP e Du L 60 ty ig Ri ht ng °F Du Fr em ty Lig en al ht ch e Du Sw GA ty iv Z el M al e Fr en ch GA Z Fe Fr m al en e ch Sw M iv et el ric Fe JI m Sal BS e PT Sw Ta iv el pe re d
Protective Caps and Plugs
-2
9U-7067
-3 -4
9U-7071 179-4431
9U-7069
-5 -6
179-4512
179-4460 179-4432
9U-7072 9U-7075
-8
179-4513
179-4461 179-4433
-10
179-4514
179-4440 179-4523
-12
179-4515 9U-7146
-14 -15
9U-7148 9U-7139 9U-7139 179-4463 179-4521 9U-7150 9U-7141
-22
179-4518 9U-7151 179-4486 179-4486
-24
9U-7152 9U-7143
-26
9U-7153
-30
9U-7139 9U-7082
179-4517 9U-7149 179-4485 179-4485
-20
-28
179-4483 9U-7078 179-4484
179-4516
-16 -18
179-4483 179-4462 179-4522
9U-7147 179-4484 179-4484
179-4485 9U-7087 179-4490 9U-7150 9U-7141 9U-7141 9U-7085 179-4486 179-7382 9U-7152 9U-7143
9U-7144
179-4519 179-4444 179-7381 179-7381
179-4444 179-7381
179-4509 179-4448 179-4448
179-4446 179-4448
-32 -34 -36 -40 -42
179-4510 179-4490 179-4490
-45
179-4489
179-4489 179-4508
-48 -52
179-4511 179-4447
NOTE: The caps and plugs listed above are intended to be used in a protective application only. Do not use these items to plug or cap a pressurized opening of any kind. Using the protective cap or plug to cover a pressurized opening may result in serious injury. These protective caps and plugs are the best way to prevent contamination from entering the hose assembly. They should not be removed until the hose assembly has been routed and ready for final connection.
259
Protective Caps and Plugs C
Tapered Cap and Plug Protectors A B
E
F Help protect against damage, dirt and moisture contamination, and corrosion during shipping and storage.
Caps / Plugs
D PART PKG NUMBER QTY MAT
A
B
C
D
E
COMMON USES CAPS
F
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
(in)
(mm)
COMMON USES PLUGS
9U-7067 250
1
0.39
10
0.31
8
0.55
14
0.39
10
0.28
7
0.31
8
1/8" NPT
9U-7068 250
1
0.43
11
0.35
9
0.59
15
0.39
10
0.31
8
0.35
9
7/16" Std. Thd.
9U-7069 250
1
0.47
12
0.43
11
0.59
15
0.39
10
0.35
9
0.43
11
1/8" NPTF
1/4" NPT 1/2" Std. Thd.
9U-7070 250
1
0.55
14
0.47
12
0.71
18
0.51
13
0.39
10
0.47
12
1/2" Std. Thd.
9/16" Std Thd.
9U-7071 250
1
0.63
16
0.51
13
0.75
19
0.51
13
0.47
12
0.55
14
1/4" NPTF
5/8" Std. Thd.
9U-7072 250
1
0.63
16
0.55
14
0.79
20
0.51
13
0.47
12
0.55
14
9/16" Std. Thd.
9U-7073 250
1
0.71
18
0.63
16
0.87
22
0.51
13
0.59
15
0.67
17
9U-7074 250
1
0.75
19
0.67
17
0.87
22
0.63
16
0.63
16
0.71
18
9U-7075 250
1
0.79
20
0.71
18
0.94
24
0.63
16
0.63
16
0.71
18
1/2" NPT
9U-7076 250
1
0.87
22
0.75
19
1.02
26
0.63
16
0.67
17
0.79
20
7/8" Std. Thd.
9U-7077 250
1
0.91
23
0.79
20
1.10
28
0.75
19
0.75
19
0.83
21
9U-7078 250
1
0.98
25
0.87
22
1.10
28
0.63
16
0.83
21
0.91
23
3/4" NPT
9U-7079 250
1
1.02
26
0.91
23
1.14
29
0.75
19
0.83
21
0.98
25
1-1/16" Std. Thd.
9U-7080 250
1
1.10
28
0.98
25
1.26
32
0.75
19
0.91
23
1.02
26
3/4" NPT
9U-7081 250
1
1.14
29
0.98
25
1.30
33
0.75
19
0.94
24
1.06
27
1-1/16" Std. Thd
9U-7082 250
1
1.22
31
1.10
28
1.54
39
0.75
19
1.02
26
1.18
30
1" NPT
7E-8716 250
1
1.30
33
1.18
30
1.46
37
0.75
19
1.10
28
1.22
31
1-5/16" Std. Thd.
9U-7084 250
1
1.34
34
1.22
31
1.50
38
0.75
19
1.18
30
1.30
33 1" NPT 1-5/16" Std. Thd
9U-7085 250
1
1.61
41
1.46
37
1.73
44
0.75
19
1.38
35
1.54
39
1-1/4" NPT
9U-7086 100
1
1.61
41
1.54
39
1.73
44
0.75
19
1.46
37
1.54
39
1-5/8" Std. Thd.
9U-7087 100
1
1.69
43
1.57
40
1.89
48
0.75
19
1.50
38
1.61
41
9U-7088 100
1
1.89
48
1.73
44
2.05
52
0.75
19
1.69
43
1.81
46
9U-7089 100
1
1.93
49
1.81
46
2.13
54
0.98
25
1.73
44
1.89
48
9U-7090
50
1
2.24
57
2.24
57
2.52
64
0.51
13
2.17
55
2.20
56
9U-7091
50
1
2.48
63
2.28
58
2.64
67
0.98
25
2.24
57
2.40
61
9U-7092
50
1
2.80
71
2.64
67
2.99
76
0.51
13
2.60
66
2.72
69
6V-7494
50
1
2.99
76
2.76
70
3.11
79
0.98
25
2.68
68
2.95
75
9U-7094
50
1
3.46
88
3.31
84
3.62
92
0.51
13
3.23
82
3.39
86
9U-7095
50
1
3.58
91
3.23
82
3.94 100 0.98
25
3.15
80
3.50
89
9U-7096
50
1
4.45 113 4.21 107 5.00 127 0.98
25
4.13 105 4.37 111
6V-7496
50
1
4.61 117 4.37 111 5.00 127 0.98
25
4.29 109 4.49 114
3/8" NPT 3/4" Std. Thd.
3/8" NPT
1/2" NPT
1-1/4" NPT 1-5/8" Std. Thd.
1 3/4" Std. Thd. 1-1/2" NPT 1-7/8" Std. Thd.
1-1/2" NPT 1-7/8" Std. Thd. 2" NPT 2" NPT 2-1/2" NPT 2-1/2" NPT 3" NPT 3" NPT 4" NPT 4" NPT
NOTE: The caps and plugs listed above are intended to be used in a protective application only. Do not use these items to plug or cap a pressurized opening of any kind. Using the protective cap or plug to cover a pressurized opening may result in serious injury. These protective caps and plugs are the best way to prevent contamination from entering the hose assembly. They should not be removed until the hose assembly has been routed and ready for final connection. To assure a proper fit, dimension "E" should be approximately .020" smaller than the opening diameter of the part to be protected, or dimension "A" should be approximately .020" larger than the opening diameter of the part to be protected. 1 MAT Values: 1 - Grade One Virgin Polyethylene; 2 - Low Density Polyethylene; 3 - High Density Polyethylene
260
Protective Caps and Plugs Tear Cap Protectors for Standard Thread
A
Help protect against damage, dirt and moisture contamination, and corrosion during shipping and storage. PART NUMBER
PKG QTY MAT
THREAD SIZE
9U-7120
250
1
7/16
JIC/SAE FITTING
(in)
9U-7121
250
1
9U-7122
250
A (mm)
(in)
B (mm)
- 20
4-TS
0.47
12
0.43
11
1/2
- 20
5-TS
0.47
12
0.47
12
1
9/16
- 18
6-TS
0.47
12
0.55
14
- 16
7-TS
0.47
12
0.67
17
8-TS
0.55
14
0.75
19
9-TS
0.55
14
0.79
20
- 14
10-TS
0.67
17
0.87
22
9U-7123
250
1
11/16
9U-7124
250
1
3/4
9U-7125
250
1
13/16
9U-7126
250
1
7/8
9U-7127
250
1
1 - 14
11-TS
0.67
17
0.98
25
9U-7128
250
1
1 1/16 - 12
12-TS
0.75
19
1.06
27
9U-7129
250
1
1 3/16 - 12
13-TS
0.75
19
1.18
30
9U-7130
100
1
1 5/16 - 12
16-TS
0.75
19
1.30
33
- 16
7/16
- 16
9U-7131
100
1
1
- 12
17-TS
0.75
19
1.42
36
9U-7132
100
1
1 5/8 - 12
20-TS
0.83
21
1.61
41
9U-7133
100
1
1 11/16 - 12
21-TS
0.83
21
1.65
42
9U-7134
100
1
1 7/8 - 12
24-TS
0.94
24
1.89
48
9U-7135
50
1
2 1/2 - 12
32-TS
1.18
30
2.48
63
Caps / Plugs
B
NOTE: The caps and plugs listed above are intended to be used in a protective application only. Do not use these items to plug or cap a pressurized opening of any kind. Using the protective cap or plug to cover a pressurized opening may result in serious injury. These protective caps and plugs are the best way to prevent contamination from entering the hose assembly. They should not be removed until the hose assembly has been routed and ready for final connection. 1 MAT Values: 1 - Grade One Virgin Polyethylene; 2 - Low Density Polyethylene; 3 - High Density Polyethylene
261
Metal Caps and Plugs
Caps / Plugs
NPTF - Hex Head Plugs PART NUMBER
THREAD DASH SIZE
THREAD SIZE
2S-7905
-1
1/16
- 27
5M-6214
-2
1/8
- 27
5M-6213
-4
1/4
- 18
3J-5390
-6
3/8
- 18
3J-5389
-8
1/2
- 14
3M-7045
-12
3/4
- 14
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
JIC 37° Plugs - Hex Head L
A
PART NUMBER
A THREAD DASH SIZE
A THREAD SIZE
L LENGTH (in) (mm)
9S-5518
-4
7/16
- 20
0.79
20
5P-4996
-5
1/2
- 20
0.79
20
9S-8927
-6
9/16
- 18
0.83
21
5P-2909
-8
3/4
- 16
0.94
24
2P-9697
-10
7/8
- 14
1.10
28
9S-8895
-12
1 1/16 - 12
1.26
32
5P-4299
-14
1 3/16 - 12
1.30
33
5P-2299
-16
1 5/16 - 12
1.34
34
260-9207
-20
1 5/8 - 12
1.46
37
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
L
A
ORFS Plugs - Hex Head PART NUMBER
A THREAD DASH SIZE
A THREAD SIZE
L LENGTH (in) (mm)
6V-9507
-4
9/16
- 18
0.67
17
6V-9508
-6
11/16
- 16
0.75
19
6V-9509
-8
13/16
- 16
0.87
22
6V-9510
-10
1 - 14
1.02
26
6V-9511
-12
1 3/16 - 12
1.06
27
6V-9512
-16
1 7/16 - 12
1.10
28
6V-9513
-20
1 11/16 - 12
1.10
28
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
262
Metal Caps and Plugs Straight Thread O-Ring - Hex Head Plugs PART NUMBER
THREAD DASH SIZE
O-RING SEAL
9S-4180
-2
5/16
- 24
4J-7533
1N-5999
-3
3/8
- 24
7J-0204
9S-4182
-4
7/16
- 20
3J-7354
3K-8460
-5
1/2
- 20
1J-9671
9S-4191
-6
9/16
- 18
3J-1907
9S-4185
-8
3/4
- 16
3K-0360
9S-4190
-10
7/8
- 14
2M-9780
9S-4183
-12
1
1/16
- 12
3D-2824
5P-9436
-12
1 1/16 - 12
3D-2824
9S-4188
-14
1 3/16 - 12
4K-1388
9S-4181
-16
1 5/16 - 12
7M-8485
9S-6130
-20
1 5/8 - 12
2S-4078
1N-5998
-24
1 7/8 - 12
6K-6307
9S-7583
-32
2 1/2 - 12
030-4606
Caps / Plugs
THREAD SIZE
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
JIS-BSPP Shipping Plugs PART NUMBER
096-3829
THREAD SIZE
1 - 11
093-1322
1/2
- 14
093-1321
1/4
- 19
093-1323
3/4
- 14
096-6073
3/8
- 19
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
L
A
Metric Plugs PART NUMBER
A THREAD SIZE
LIGHT DUTY TUBE O.D. (mm)
HEAVY DUTY TUBE O.D. (mm)
2Y-6462
M14 x 1.5
8
6
0.63
16
9T-6322
M14 x 1.5
8
6
0.87
22
2Y-5841
M16 x 1.5
10
8
0.63
16
2Y-6461
M16 x 1.5
10
8
0.71
18
8C-4424
M22 x 1.5
14
14
1.06
27
L LENGTH (in) (mm)
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
263
Metal Caps and Plugs ÈA
SAE Code 61 Port Cover
Caps / Plugs
PART NUMBER
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
5H-4017
1.19
30.2
-8
5H-4018
1.50
38.1
-12
5H-4019
1.75
44.5
-16
5H-4020
2.00
50.8
-20
2J-2668
2.37
60.3
-24
2J-5608
2.81
71.4
-32
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
ÈA
Caterpillar Flange Port Cover Caterpillar Flange Port Cover can be substituted for SAE Code 62 Port Cover by making sure the appropriate hardware is used. Refer to the Split Flange Hardware section. PART NUMBER
A HEAD SIZE (in) (mm)
A FLANGE DASH SIZE
5P-0045
1.25
31.8
-8
5P-0046
1.63
41.3
-12
5P-0047
1.87
47.6
-16
5P-0048
2.13
54.0
-20
5P-0049
2.50
63.5
-24
5P-0050
3.13
79.4
-32
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
L
A
JIC 37° Cap PART NUMBER
A THREAD DASH SIZE
9L-8493
-4
7/16
- 20
0.59
15
5P-0405
-5
1/2
- 20
0.63
16
8S-4950
-6
9/16
- 18
0.63
16
8S-4951
-8
3/4
- 16
0.75
19
6J-7366
-10
7/8
- 14
0.83
21
9S-8896
-12
1 1/16 - 12
0.91
23
8L-9137
-14
1 3/16 - 12
0.98
25
3R-6789
-16
1 5/16 - 12
1.02
26
8T-1458
-20
1 5/8 - 12
1.22
31
A THREAD SIZE
L LENGTH (in) (mm)
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
264
Metal Caps and Plugs ORFS Cap
6V-9828
-4
9/16
- 18
6V-9829
-6
11/16
- 16
6V-9830
-8
13/16
- 16
6V-9831
-10
1 - 14
6V-9832
-12
1 3/16 - 12
6V-9833
-16
1 7/16 - 12
6V-9834
-20
1 11/16 - 12
A THREAD SIZE
Caps / Plugs
A
PART NUMBER
A THREAD DASH SIZE
NOTE: The caps and plugs listed above are composed of metal and may be used in a pressure sealing application. Using these metal caps and plugs will seal an opening port in order to contain fluids and prevent contamination while a hose assembly is being serviced.
265
Caps / Plugs
Metal Caps and Plugs
266
Seals Seal Application Charts...................................................................................................... 268 Seals.................................................................................................................................. 269 Seal Kits............................................................................................................................. 273
Seals
267
Seal Application Charts O-Ring Application Charts Caterpillar uses, and offers, O-Rings made from various materials with different physical properties. The following tables provide general information regarding the properties of some of our O-Ring materials, and their usage in Cat equipment.
Common Uses MATERIAL TYPE
DURO A HARDNESS
DIFFERENTIAL FINAL DRIVE LUBE OILS
ENGINE LUBE OILS
ENGINE COOLING SYSTEM FLUIDS
60 70 75 90 78 70 70 70 90
X X X X X X
X X X X X X
X X X X X
X X
X X
NITRILE (BUNA N) NITRILE (BUNA N) NITRILE (BUNA N) NITRILE (BUNA N) HNBR SILICONE EPDM FLUOROELASTOMER (VITON) FLUOROELASTOMER (VITON)
HYDRAULIC ENGINE POWER SHIFT HYDROSTATIC SYSTEM FUELS TRANSMISSION TRANSMISSION FLUIDS DIESEL/GAS LUBE OILS LUBE OILS
X X X X X X
X X X X X
X X X X X
X X X X X
X X
X X
X X
X X
X
Material and Application Descriptions Seals
MATERIAL TYPE
DURO A HARDNESS
OPERATING TEMPERATURE RANGE
INTERMITTENT TEMPERATURE PEAK
APPLICATION DESCRIPTION
60
-40° to 100°C (-40° to 212°F)
121°C - 250°F
70
-40° to 100°C (-40° to 212°F)
121°C - 250°F
75
-40° to 100°C (-40° to 212°F)
121°C - 250°F
Good for use in all oil applications including lubricating and hydraulic oils, gasoline, alcohol, water, and alkaline and salt solutions. In hydraulic systems use 75 Duro A hardness in applications where pressure 1500 psi.
HNBR
90 78
-40° to 100°C (-40° to 212°F) -40° to 121°C (-40° to 275°F)
121°C - 250°F 150°C - 302°F
SILICONE
70
-53° to 163°C (-65° to 325°F)
232°C - 450°F
EPDM
70
-55° to 135°C (-67° to 275°F)
150°C - 302°F
FLUOROELASTOMER (FKM)
75
-40° to 175°C (-40° to 350°C)
260°C - 500°F
90
-40° to 175°C (-40° to 350°C)
260°C - 500°F
NITRILE
Good for use in all oil applications including lubricating and hydraulic oils, gasoline, alcohol, water, and alkaline and salt solutions. For use in high heat/low pressure applications on or near engines, transmissions, and hydraulic systems. Good with engine and hydraulic oils, but not fuels or gasoline. Relatively weak physical strength and abrasion resistance usually limit silicone to static service. Do not use silicone or grease as a lubricant on a silicone seal. Primarily used for sealing engine cylinder liners and occasionally used to seal cooling and air inlet systems. Excellent resistance to water, steam, acid, ketones, phosphate esters, automotive brake fluids and ozone. EPDM swells when in contact with oil or fuel. Liquid soap or glycerine is usually used to lubricate seal for assembly. For use with petroleum oils and silicone greases. Do not use with keotones, methoxypropanol based coolants (Dowtherm 209) or anhydrous ammonia. Provides high temperature stability and can provide extended life over 120°C. In hydraulic applications, use 75 Durometer A with pressures 1500 psi.
Seal materials can tolerate exposure to substantially higher than normal operating temperatures for short periods of time. Repeated, or constant, exposure to temperatures higher than the operating range can drastically reduce seal life, resulting in premature leakage.
268
Seals SAE Straight Thread O-Ring Boss O-Ring Seals OB
OA
A SEAL THICKNESS (in) (mm)
THREAD DASH SIZE
B SEAL I.D. (in) (mm)
VITON 90-Duro
VITON 75-Duro
NITRILE 90-Duro
THREAD SIZE
238-5078
5P-7812
4J-7533
5/16
- 24
-2
0.06
1.6
0.24
6.1 7.7
238-5079
5P-7813
7J-0204
3/8
- 24
-3
0.06
1.6
0.30
214-7566
6V-5048
3J-7354
7/16
- 20
-4
0.07
1.8
0.35
8.9
214-7567
5P-7814
1J-9671
1/2
- 20
-5
0.07
1.8
0.41
10.5
214-7568
6V-5049
3J-1907
9/16
- 18
-6
0.08
2.0
0.47
11.9
238-5080
8L-2786
3K-0360
3/4
- 16
-8
0.09
2.2
0.65
16.4
238-5081
6V-4589
2M-9780
7/8
- 14
-10
0.10
2.5
0.76
19.2
238-5082
6V-5050
3D-2824
1 1/16 - 12
-12
0.12
3.0
0.93
23.5
238-5083
6V-1903
4K-1388
1 3/16 - 12
-14
0.12
3.0
1.05
26.6
5/16
238-5084
5P-7701
7M-8485
1
- 12
-16
0.12
3.0
1.17
29.7
228-7096
5P-7815
2S-4078
1 5/8 - 12
-20
0.12
3.0
1.48
37.5
238-5086
5P-7816
6K-6307
1 7/8 - 12
-24
0.12
3.0
1.72
43.7
228-7097
5P-7817
030-4606
2 1/2 - 12
-32
0.12
3.0
2.34
59.4
JIC 37° Copper Seals øB
A SEAL O.D. (in) (mm)
B SEAL THICKNESS (in) (mm)
PART NUMBER
THREAD SIZE
6V-7333
9/16
- 18
-6
0.48
12.2
0.005
0.13
6V-7332
3/4
- 16
-8
0.65
16.5
0.010
0.25
6V-7331
7/8
- 14
-10
0.78
19.8
0.010
0.25
6V-7330
1
1/16
- 12
-12
0.94
23.9
0.010
0.25
6V-7329
1 5/16 - 12
-16
1.19
30.2
0.010
0.25
6V-7328
1 5/8 - 12
-20
1.50
38.1
0.010
0.25
6V-7327
1 7/8 - 12
-24
1.75
44.5
0.010
0.25
Seals
Aø
THREAD DASH SIZE
NOTE: Copper seals are available for use in stopping leaks on 37° JIC fittings. The seal fits over the 37° tapered seat of the fitting body and interfaces with the mating 37° tube flare. The copper seal provides a soft malleable material between the two surfaces that deforms under compression - filling scratches, nicks and other surface imperfections which can allow leaks.
Code 61 Flange O-Ring Seals OB VITON 90-DURO
OA
5P-1480
8C-3077
HEAD SIZE (in) (mm)
FLANGE DASH SIZE
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
VITON 75-DURO
SILICONE 70-DURO
NITRILE 90-DURO
5P-6718
8M-4435
4J-5140
1.19
30.2
-8
0.14
3.6
0.73
18.5
3P-1156
8M-4445
4J-8996
1.34
34.0
-10
0.14
3.6
0.86
21.8
3P-1155
8M-4988
4J-5267
1.50
38.1
-12
0.14
3.6
0.98
24.9
061-9458
8M-5254
4J-0519
0.14
3.6
1.23
31.2
5P-8066
8M-4987
4J-0520
0.14
3.6
1.30
33.0
5P-4268
8M-5249
4J-0521
0.14
3.6
1.36
34.5
061-7540
8M-4986
4J-0522
0.14
3.6
1.48
37.6
8J-4351
8M-4443
4J-0523
0.14
3.6
1.73
43.9
061-9455
8M-5661
4J-0524
0.14
3.6
1.86
47.2
5P-8211
8M-4436
4J-0525
0.14
3.6
1.98
50.3
061-9456
8M-5010
4J-0526
0.14
3.6
2.11
53.6
6V-4368
8M-4390
4J-0527
0.14
3.6
2.23
56.6
1.75
44.5
-16
2.00
50.8
-20
2.37
60.3
-24
2.81
71.4
-32
269
Seals Code 61 Flange O-Ring Seals (continued) OB VITON 90-DURO
VITON 75-DURO
SILICONE 70-DURO
NITRILE 90-DURO
8T-0568
033-6031
9M-7539
6J-2680
HEAD SIZE (in) (mm)
3.31
FLANGE DASH SIZE
84.1
-40
A SEAL THICKNESS (in) (mm)
0.14
3.6
B SEAL I.D. (in) (mm)
2.73
69.3
OA
Caterpillar Flange D-Ring Seals A
Seals
ØB
HEAD SIZE (in) (mm)
A SEAL THICKNESS (in) (mm)
FLANGE DASH SIZE
B SEAL I.D. (in) (mm)
VITON 90-Duro
NITRILE 90-DURO
235-2472
1P-3700
1.25
31.8
-8
0.20
5.0
0.75
19.0
235-2473
1P-3702
1.63
41.3
-12
0.20
5.0
1.00
25.4
235-2474
1P-3703
1.87
47.6
-16
0.20
5.0
1.26
31.9
235-2475
1P-3704
2.13
54.0
-20
0.20
5.0
1.50
38.2
235-2476
1P-3705
2.50
63.5
-24
0.20
5.0
1.76
44.7
235-2477
1P-3706
0.00
0.0
0.20
5.0
2.01
51.1
235-2478
1P-3707
0.00
0.0
0.20
5.0
2.13
54.2
235-2479
1P-3708
0.00
0.0
0.20
5.0
2.26
57.4
235-2480
1P-3709
3.13
79.4
0.20
5.0
2.52
63.9
-32
NOTE: For use with Caterpillar Flange Head Couplings only.
O-Ring Face Seal O-Ring Seals OB
OA
VITON 90-Duro
VITON 75-Duro
228-7088
061-7538
SILICONE 70-Duro
5H-8853
NITRILE 90-Duro
THREAD SIZE
4J-5477
9/16
- 18
-4
0.07
1.8
0.34
8.6
6V-8397
11/16
- 16
-6
0.07
1.8
0.40
10.2
13/16
- 16
8L-2779
228-7090
033-6033
6V-8398
-8
0.07
1.8
0.49
12.4
228-7091
8L-2746
7J-9108
1 - 14
-10
0.07
1.8
0.61
15.6
228-7092
5P-9757
6V-9746
1 3/16 - 12
-12
0.07
1.8
0.78
19.8
5K-9090
1 7/16 - 12
-16
0.07
1.8
0.96
24.4
6V-8400
1 11/16 - 12
-20
0.07
1.8
1.18
29.9
8T-0315
2 - 12
-24
0.07
1.8
1.49
37.8
228-7094
5P-6436
228-7095
O-Rings for DIN Metric - Light Series OB
270
B SEAL I.D. (in) (mm)
228-7089
228-7093
OA
THREAD DASH SIZE
A SEAL THICKNESS (in) (mm)
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
PART NUMBER
THREAD SIZE
3E-4288
M12 x 1.5
0.06
1.5
0.18
3E-4289
M14 x 1.5
0.06
1.5
0.26
6.5
3E-4297
M18 x 1.5
0.06
1.5
0.39
10.0
7T-0506
M26 x 1.5
0.08
2.0
0.59
15.0
3E-6761
M30 x 2.0
0.08
2.0
0.79
20.0
9X-7447
M45 x 2.0
0.10
2.5
1.26
32.0
4.5
Seals O-Rings for DIN Metric - Heavy Series OB
OA
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
PART NUMBER
THREAD SIZE
7T-0508
M22 x 1.5
0.08
2.0
0.00
3E-4296
M18 x 1.5
0.06
1.5
0.31
8.0
3E-4298
M24 x 1.5
0.08
2.0
0.47
12.0
3E-4299
M30 x 2.0
0.09
2.4
0.64
16.3
3E-6762
M36 x 2.0
0.09
2.4
0.80
20.3
3E-6763
M42 x 2.0
0.09
2.4
1.00
25.3
3E-6764
M52 x 2.0
0.10
2.5
1.30
33.0
0.0
Metric Port O-Ring Seals OB
OA
A SEAL THICKNESS (in) (mm)
B SEAL I.D. MATERIAL (in) (mm) DESCRIPTION
THREAD SIZE
8T-7876
M10 x 1.0
0.06
1.5
0.32
8.2 NITRILE 90 DURO
6V-9028
M12 x 1.5
0.08
2.1
0.37
9.4 NITRILE 90 DURO
8C-3076
M12 x 1.5
0.08
2.1
0.37
9.4 VITON 90 DURO
6V-6560
M14 x 1.5
0.08
2.1
0.45
11.4 NITRILE 90 DURO
8T-6850
M16 x 1.5
0.08
2.1
0.53
13.4 NITRILE 90 DURO
8T-7524
M18 x 1.5
0.08
2.1
0.61
15.4 NITRILE 90 DURO
8T-7877
M20 x 1.5
0.08
2.1
0.69
17.4 NITRILE 90 DURO
6V-7970
M22 x 1.5
0.08
2.1
0.76
19.4 NITRILE 90 DURO
8T-7878
M26 x 1.5
0.11
2.8
0.89
22.7 NITRILE 90 DURO
8T-7525
M27 x 2.0
0.11
2.8
0.93
23.7 NITRILE 90 DURO
8T-7526
M33 x 2.0
0.11
2.8
1.17
29.7 NITRILE 90 DURO
Seals
PART NUMBER
British Standard Pipe Parallel (BSPP) Dowty Port Seals OC
A
Seal is required with a port connection only. No seal is required with a BSPP Female Swivel 60° Cone or Spherical Seat. OB
PART NUMBER
A THREAD SIZE
A THREAD DASH SIZE
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
C SEAL O.D. (in) (mm)
6V-0404
1/8
- 28
-2
0.11
2.9
0.41
10.3
0.63
15.9
6V-0405
1/4
- 19
-4
0.11
2.9
0.54
13.7
0.81
20.6
6V-0406
3/8
- 19
-6
0.11
2.9
0.68
17.2
0.94
23.9
6V-0407
1/2
- 14
-8
0.13
3.2
0.85
21.5
1.13
28.6
8C-6504
5/8
- 14
-10
0.13
3.2
0.93
23.5
1.25
31.8
6V-0408
3/4
- 14
-12
0.13
3.2
1.06
27.0
1.38
35.0
6V-0409
1 - 11
-16
0.16
4.1
1.33
33.9
1.69
42.9
9X-7423
1 1/4 - 11
-20
0.13
3.2
1.69
42.9
2.06
52.4
8T-1568
1 1/2 - 11
-24
0.16
4.1
1.91
48.4
2.31
58.7
271
Seals 20° Tapered Face Seals PART NUMBER
B
A
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
THREAD SIZE
THREAD DASH SIZE
4I-8888
1 - 14
-10
0.08
2.0
0.62
15.8
4I-8889
1
3/16
- 12
-12
0.08
2.0
0.78
19.8
4I-8891
1 7/16 - 12
-16
0.08
2.0
0.98
24.8
Inverted & Tube O-Ring A/C O-Ring Seals OB PART NUMBER
OA
THREAD SIZE
THREAD DASH SIZE
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
9X-7380
5/8
- 18
-6
0.07
1.8
0.30
7.7
9X-7381
3/4
- 18
-8
0.07
1.8
0.43
10.8
9X-7382
7/8
- 16
-10
0.07
1.8
0.55
14.0
Adapter to Self Sealing Fitting A/C O-Ring Seals Seals
OB PART NUMBER
OA
272
THREAD SIZE
A SEAL THICKNESS (in) (mm)
B SEAL I.D. (in) (mm)
9X-7383
7/8
- 20
0.07
1.8
0.68
17.2
9X-7384
11/4
- 18
0.07
1.8
1.05
26.7
Seal Kits O-Ring Kit (Silicone) KIT PART NUMBER
MATERIAL
270-1533
SILICONE 70DURO
DASH SIZE
10
8M-4437
-113
5
8M-4438
-115
5
8M-8157
-116
5
8M-4389
-117
3
8M-8283
-118
5
8M-8515
-125
5
8M-4435
-210
5
8M-4445
-212
5
8M-4446
-213
5
8M-4988
-214
5
8M-4432
-215
5
8M-5248
-216
5
8M-5254
-218
10
8M-4987
-219
5
8M-5249
-220
10
8M-4986
-222
3
8M-4992
-223
3
8M-4443
-224
3
8M-5661
-225
3
8M-4436
-226
3
8M-5010
-227
3
8M-4390
-228
3
8M-5252
-231
3
8M-4990
-312
5
1S-0004
-314
5
9H-6067
-316
5
9M-4849
-317
3
8M-4991
-320
3
9M-7002
-325
3
9M-9647
-326
5
2S-2251
-327
3
6L-1651
-329
Seals
QUANTITY
SEAL PART NUMBER
O-Ring Kit for STOR Boss, ORFS, & Code 61 Flange Connections KIT PART NUMBER
MATERIAL
270-1528
NITRILE 90 DURO
CATEGORY
QUANTITY
SEAL PART NUMBER
DASH SIZE
STOR Boss
20
4J-7533
-902
STOR Boss
20
7J-0204
-903
STOR Boss
20
3J-7354
-904
STOR Boss
20
1J-9671
-905
STOR Boss
20
3J-1907
-906
STOR Boss
20
3K-0360
-908
273
Seal Kits O-Ring Kit for STOR Boss, ORFS, & Code 61 Flange Connections (continued) MATERIAL
Seals
KIT PART NUMBER
CATEGORY
QUANTITY
SEAL PART NUMBER
DASH SIZE
STOR Boss
20
2M-9780
-910
STOR Boss
20
3D-2824
-912
STOR Boss
20
4K-1388
-914
STOR Boss
20
7M-8485
-916
STOR Boss
20
2S-4078
-920
STOR Boss
20
6K-6307
-924
STOR Boss
20
030-4606
-932
ORFS
20
4J-5477
-11
ORFS
20
6V-8397
-12
ORFS
20
6V-8398
-14
ORFS
20
7J-9108
-16
ORFS
20
6V-9746
-18
ORFS
20
5K-9090
-21
ORFS
20
6V-8400
-25
ORFS
20
8T-0315
-29
Code 61 Flange
20
4J-5140
-210
Code 61 Flange
20
4J-5267
-214
Code 61 Flange
15
4J-0519
-218
Code 61 Flange
15
4J-0520
-219
Code 61 Flange
15
4J-0521
-220
Code 61 Flange
15
4J-0522
-222
Code 61 Flange
15
4J-0523
-224
Code 61 Flange
15
4J-0524
-225
Code 61 Flange
10
4J-0525
-226
Code 61 Flange
10
4J-0526
-227
Code 61 Flange
10
4J-0527
-228
D-Ring Kit for Caterpillar Flange Connections
274
KIT PART NUMBER
MATERIAL
270-1535
NITRILE 90 DURO
QUANTITY
SEAL PART NUMBER
10
1P-3700
10
1P-3702
10
1P-3703
10
1P-3704
10
1P-3705
10
1P-3706
10
1P-3707
5
1P-3708
5
1P-3709
Seal Kits O-Ring Kit for O-Ring Face Seal Connections KIT PART NUMBER
MATERIAL
270-1539
NITRILE 90 DURO
SEAL PART NUMBER
DASH SIZE
20
4J-5477
-11
20
6V-8397
-12
20
6V-8398
-14
20
7J-9108
-16
10
6V-9746
-18
10
5K-9090
-21
10
6V-8400
-25
10
8T-0315
-29
QUANTITY
SEAL PART NUMBER
15
6V-6560
10
6V-7970
15
6V-9028
15
8T-6850
15
8T-7524
10
8T-7525
QUANTITY
O-Ring Kit for Metric Adapters KIT PART NUMBER
MATERIAL
270-1537
NITRILE 90 DURO
8T-7526 8T-7876
15
8T-7877
10
8T-7878
Seals
5 15
O-Ring Kit for A/C Connections (R134A Compatible) KIT PART NUMBER
MATERIAL
270-1540
HNBR 78 DURO
QUANTITY
SEAL PART NUMBER
15
9X-7378
15
9X-7379
15
9X-7380
15
9X-7381
15
9X-7382
15
9X-7383
15
9X-7384
15
9X-7385
10
121-7136
10
121-7137
10
121-7138
10
229-4896
275
Seals
Seal Kits
276
Flanges / Hardware Split Flanges and Hardware............................................................................................... 278 Pre-Install Flanges............................................................................................................. 283
Flanges / Hardware
277
Split Flanges and Hardware Code 61 Split Flanges & Hardware (for Inch Bolts) HEAD SIZE (in) (mm)
FLANGE DASH SIZE
SPLIT FLANGE
FLAT HARD WASHER
WASHER SIZE OD x ID x THK (in)
.630 x .346 x .079
BOLT
BOLT SIZE DIA-TPI x LG.
1.19
30.2
-8
1P-4574
6V-5782
5/16-18 x 1.13
8T-4224
1.34
34.0
-10
1P-4575
6V-5782
5 /16-18 x 1.13
8T-4224
.630 x.346 x .079
1.50
38.1
-12
1P-4576
5S-7382
3 /8-16 x 1.38
8T-4896
.728 x .402 x .098
1.75
44.5
-16
1P-4577
5S-7382
3 /8-16 x 1.38
8T-4896
.728 x .402 x .098
2.00
50.8
-20
1P-4578
8T-8916
7 /16-14 x 1.50
8T-5360
.886 x .472 x .098
2.37
60.3
-24
1P-4579
8T-8919
1 /2-13 x 1.75
8T-4223
1.004 x .531 x .118
2.81
71.4
-32
1P-4582
8T-8919
1 /2-13 x 1.75
8T-4223
1.004 x .531 x .118
A
Code 61 Split Flanges (for Inch Bolts)
B F C D
E
J K
G H
Dimensions in Inch PART NUMBER
HEAD SIZE (in)
FLANGE DASH SIZE
A (in)
B (in)
C (in)
D (in)
E (in)
F (in)
G (in)
H (in)
J (in)
K (in)
1P-4574
1.19
-8
2.12
1.50
0.69
1.81
0.33
0.31
0.97
1.22
0.63
0.24
1P-4575
1.34
-10
2.37
1.69
0.78
1.94
0.34
0.31
1.13
1.37
0.66
0.24
1P-4576
1.50
-12
2.56
1.87
0.87
2.05
0.41
0.34
1.28
1.53
0.70
0.24
1P-4577
1.75
-16
2.74
2.06
1.03
2.32
0.41
0.34
1.53
1.78
0.70
0.30
1P-4578
2.00
-20
3.13
2.31
1.19
2.88
0.47
0.41
1.73
2.03
0.70
0.30
1P-4579
2.37
-24
3.69
2.75
1.41
3.23
0.53
0.47
2.02
2.41
0.76
0.29
1P-4582
2.81
-32
4.00
3.06
1.69
3.82
0.53
0.47
2.48
2.84
0.76
0.35
E = Hole Diameter F = Radius
A
Code 61 Split Flanges (for Inch Bolts)
B F C D
E
J K
G
Flanges / Hardware
H
Dimensions in mm PART NUMBER
HEAD SIZE (mm)
1P-4574
30.2
-8
53.8
38.1
17.5
46.0
8.3
7.9
24.6
31.0
16.0
6.1
1P-4575
34.0
-10
60.3
42.9
19.8
49.2
8.7
7.9
28.6
34.9
16.7
6.2
1P-4576
38.1
-12
64.9
47.6
22.2
52.0
10.3
8.6
32.5
38.9
17.7
6.2
1P-4577
44.5
-16
69.6
52.4
26.2
59.0
10.3
8.6
38.9
45.2
17.7
7.5
1P-4578
50.8
-20
79.5
58.7
30.2
73.2
11.9
10.4
44.0
51.6
17.7
7.5
1P-4579
60.3
-24
93.7
69.9
35.7
82.0
13.5
11.9
51.2
61.1
19.3
7.3
1P-4582
71.4
-32
101.7 77.8
42.9
97.0
13.5
11.9
63.1
72.2
19.3
8.8
E = Hole Diameter F = Radius
278
FLANGE DASH SIZE
A B C D E F G H J K (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
Split Flanges and Hardware Code 61 Split Flanges & Hardware (for Metric Bolts) Flanges & Hardware for use with Bolts with Metric threads. HEAD SIZE (in) (mm)
FLANGE DASH SIZE
SPLIT FLANGE
1P-4574
BOLT
BOLT SIZE DIA x PITCH x LG.
FLAT HARD WASHER
WASHER SIZE OD x ID x THK (mm)
8T-7547
M8 x 1.25 x 30
8T-4224
16.0 x 8.8 x 2.0
1.19
30.2
-8
1.34
34.0
-10
1P-4575
8T-7547
M8 x 1.25 x 30
8T-4224
16.0 x 8.8 x 2.0
1.50
38.1
-12
8C-3205
8T-4196
M10 x 1.50 x 35
8T-4121
21.0 x 11.0 x 2.5
1.75
44.5
-16
8C-3206
8T-4196
M10 x 1.50 x 35
8T-4121
21.0 x 11.0 x 2.5
2.00
50.8
-20
6V-0397
8T-4183
M12 x 1.75 x 40
8T-4223
25.5 x 13.5 x 3.0
2.37
60.3
-24
1P-4579
8T-4184
M12 x 1.75 x 45
8T-4223
25.5 x 13.5 x 3.0
2.81
71.4
-32
1P-4582
8T-4184
M12 x 1.75 x 45
8T-4223
25.5 x 13.5 x 3.0
A
Code 61 Split Flanges (for Metric Bolts)
B F C D
E
J K
G H
Dimensions in Inch PART NUMBER
HEAD SIZE (in)
FLANGE DASH SIZE
A (in)
B (in)
C (in)
D (in)
E (in)
F (in)
G (in)
H (in)
J (in)
K (in)
1P-4574
1.19
-8
2.12
1.50
0.69
1.81
0.33
0.31
0.97
1.22
0.63
0.24
1P-4575
1.34
-10
2.37
1.69
0.78
1.94
0.34
0.31
1.13
1.37
0.66
0.24
8C-3205
1.50
-12
2.56
1.87
0.87
2.05
0.43
0.34
1.28
1.53
0.70
0.24
8C-3206
1.75
-16
2.74
2.06
1.03
2.36
0.43
0.34
1.53
1.78
0.70
0.29
6V-0397
2.00
-20
3.13
2.31
1.19
2.88
0.51
0.41
1.73
2.03
0.70
0.28
1P-4579
2.37
-24
3.69
2.75
1.41
3.23
0.53
0.47
2.02
2.41
0.76
0.29
1P-4582
2.81
-32
4.00
3.06
1.69
3.82
0.53
0.47
2.48
2.84
0.76
0.35
E = Hole Diameter F = Radius
A
Code 61 Split Flanges (for Metric Bolts)
B F C D
E
J G H
PART NUMBER
HEAD SIZE (mm)
FLANGE DASH SIZE
1P-4574
30.2
-8
53.8
38.1
17.5
46.0
8.3
7.9
24.6
31.0
16.0
6.1
1P-4575
34.0
-10
60.3
42.9
19.8
49.2
8.7
7.9
28.6
34.9
16.7
6.2
8C-3205
38.1
-12
64.9
47.6
22.2
52.0
11.0
8.6
32.5
38.9
17.7
6.2
8C-3206
44.5
-16
69.6
52.4
26.2
60.0
11.0
8.6
38.9
45.2
17.7
7.4
6V-0397
50.8
-20
79.5
58.7
30.2
73.2
13.0
10.4
44.0
51.6
17.7
7.1
1P-4579
60.3
-24
93.7
69.9
35.7
82.0
13.5
11.9
51.2
61.1
19.3
7.3
1P-4582
71.4
-32
101.7 77.8
42.9
97.0
13.5
11.9
63.1
72.2
19.3
8.8
A B C D E F G H J K (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
E = Hole Diameter F = Radius
279
Flanges / Hardware
K
Dimensions in mm
Split Flanges and Hardware Code 62 Split Flanges & Hardware (for Inch Bolts) Flanges & Hardware for use with Bolts with Inch threads. HEAD SIZE (in) (mm)
FLANGE DASH SIZE
SPLIT FLANGE
BOLT
BOLT SIZE DIA-TPI x LG.
FLAT HARD WASHER
WASHER SIZE OD x ID x THK (in)
6V-8918
5 /16-18 x 1.25
8T-4224
.630 x .346 x .079 .728 x .402 x .098
1.25
31.8
-8
124-4286
1.63
41.3
-12
124-4287
4L-9337
3 /8-16 x 1.50
8T-4896
1.87
47.6
-16
124-4288
8C-6877
7 /16-14 x 1.75
8T-5360
.886 x .472 x .098
2.13
54.0
-20
2T-3001
8T-8919
1 /2-13 x 1.75
8T-4223
1.004 x .531 x .118
2.50
63.5
-24
2T-3000
7X-0347
5 /8-11 x 2.25
8T-4122
1.260 x .669 x .138
3.13
79.6
-32
124-4289
8C-6857
3 /4-10 x 2.75
8T-4994
1.438 x .787 x .138
A
Code 62 Split Flanges (for Inch Bolts) 1
B F C D
E
M
J K
G H
Dimensions in Inch PART NUMBER
HEAD SIZE (in)
FLANGE DASH SIZE
A (in)
B (in)
C (in)
D (in)
E (in)
F (in)
G (in)
H (in)
J (in)
K (in)
M (in)
124-4286 124-4287
1.25
-8
2.22
1.59
0.71
1.86
0.34
0.31
0.97
1.28
0.63
0.28
0.87
1.63
-12
2.81
2.00
0.94
2.36
0.41
0.39
1.28
1.66
0.75
0.33
1.10
124-4288
1.87
-16
3.19
2.25
1.17
2.74
0.47
0.47
1.53
1.91
0.94
0.35
1.30
2T-3001
2.13
-20
3.75
2.63
1.21
3.04
0.53
0.55
1.75
2.15
1.06
0.39
1.50
2T-3000
2.50
-24
4.44
3.13
1.44
3.74
0.66
0.67
2.03
2.53
1.18
0.48
1.69
124-4289
3.13
-32
5.25
3.81
1.75
4.48
0.78
0.71
2.66
3.16
1.46
0.48
2.05
E = Hole Diameter F = Radius
1 Note: For use with SAE Code 62 Couplings only.
A
Code 62 Split Flanges (for Inch Bolts) 1
B F C D
E
M
J K
G
Flanges / Hardware
H
Dimensions in mm PART NUMBER
HEAD SIZE (mm)
FLANGE DASH SIZE
124-4286
31.8
-8
56.4
40.5
18.0
47.2
8.7
8.0
24.6
32.5
16.0
7.2
22.0
124-4287
41.3
-12
71.4
50.8
24.0
60.0
10.3
10.0
32.5
42.1
19.0
8.3
28.0
124-4288
47.6
-16
81.0
57.2
29.8
69.6
11.9
12.0
38.9
48.4
24.0
9.0
33.0
2T-3001
54.0
-20
95.2
66.7
30.8
77.2
13.5
14.0
44.5
54.7
26.9
9.8
38.1
2T-3000
63.5
-24
112.8 79.4
36.6
95.0
16.7
17.0
51.6
64.3
30.0
12.1
43.0
124-4289
79.6
-32
133.4 96.8
44.4 113.8 19.8
18.0
67.6
80.2
37.0
12.1
52.0
A B C D E F G H J K M (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
E = Hole Diameter F = Radius
1 Note: For use with SAE Code 62 Couplings only.
280
Split Flanges and Hardware Caterpillar Flange Split Flanges & Hardware (for Inch Bolts) Flanges and Hardware for use with Bolts with Inch threads. HEAD SIZE (in) (mm)
FLANGE DASH SIZE
SPLIT FLANGE
FLAT HARD WASHER
WASHER SIZE OD x ID x THK (in)
.728 x .402 x .098
BOLT
BOLT SIZE DIA-TPI x LG.
1.63
41.3
-12
1P-5765
5S-7383
3 /8-16 x 1.75
8T-4896
1.87
47.6
-16
1P-5766
8C-6877
7 /16-14 x 1.75
8T-5360
.886 x .472 x .098
2.13
54.0
-20
1P-5767
8T-4835
1 /2-13 x 2.00
8T-4223
1.004 x .531 x .118
2.50
63.5
-24
5P-8077
8T-6871
5 /8-11 x 2.50
8T-4122
1.260 x .669 x .138
3.13
79.6
-32
6V-0402
8C-6857
3 /4-10 x 2.75
8T-4994
1.438 x .787 x .138
A
Caterpillar Flange Split Flanges (for Inch Bolts)
B F C D
E
J K
G H
Dimensions in Inch PART NUMBER
HEAD SIZE (in)
FLANGE DASH SIZE
A (in)
B (in)
C (in)
D (in)
E (in)
F (in)
G (in)
H (in)
J (in)
K (in)
1P-5765
1.63
-12
2.82
2.00
0.94
2.38
0.41
0.41
1.27
1.63
1.10
0.53
1P-5766
1.87
-16
3.19
2.25
1.09
2.76
0.47
0.47
1.55
1.89
1.10
0.53
1P-5767
2.13
-20
3.75
2.63
1.25
3.07
0.53
0.56
1.70
2.16
1.10
0.53
5P-8077
2.50
-24
4.46
3.13
1.44
3.78
0.66
0.67
2.08
2.51
1.26
0.53
6V-0402
3.13
-32
5.24
3.81
1.75
4.49
0.83
0.72
2.64
3.13
1.44
0.53
E = Hole Diameter F = Radius
A
Caterpillar Flange Split Flanges (for Inch Bolts)
B F C D
E
J K
G H
Dimensions in mm PART NUMBER
HEAD SIZE (mm)
FLANGE DASH SIZE
1P-5765
41.3
-12
71.6
50.8
23.8
60.4
10.3
10.4
32.3
41.5
28.0
13.5
1P-5766
47.6
-16
81.0
57.2
27.8
70.0
11.9
11.9
39.4
47.9
28.0
13.5
1P-5767
54.0
-20
95.3
66.7
31.8
78.0
13.5
14.3
43.3
54.8
28.0
13.5
5P-8077
63.5
-24
113.4 79.4
36.5
96.0
16.7
17.0
52.8
63.7
32.0
13.5
6V-0402
79.6
-32
133.0 96.8
44.4 114.0 21.0
18.3
67.1
79.6
36.5
13.5
A B C D E F G H J K (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
E = Hole Diameter F = Radius
Flanges / Hardware
281
Split Flanges and Hardware Caterpillar Flange Split Flanges & Hardware (for Metric Bolts) Flanges & Hardware for use with Bolts with Metric threads. HEAD SIZE (in) (mm)
FLANGE DASH SIZE
SPLIT FLANGE
FLAT HARD WASHER
WASHER SIZE OD x ID x THK (mm)
BOLT
BOLT SIZE DIA x PITCH x LG.
1.63
41.3
-12
8T-9403
8T-4182
M10 x 1.50 x 45
8T-4121
21.0 x 11.0 x 2.5
1.87
47.6
-16
6V-0400
8T-4184
M12 x 1.75 x 45
8T-4223
25.5 x 13.5 x 3.0
2.13
54.0
-20
1P-5767
8T-4194
M12 x 1.75 x 50
8T-4223
25.5 x 13.5 x 3.0
2.50
63.5
-24
5P-8077
8T-4140
M16 x 2.00 x 60
8T-4122
32.0 x 17.0 x 3.5
A
Caterpillar Flange Split Flanges (for Metric Bolts)
B F C D
E
J K
G H
Dimensions in Inch PART NUMBER
HEAD SIZE (in)
FLANGE DASH SIZE
A (in)
B (in)
C (in)
D (in)
E (in)
F (in)
G (in)
H (in)
J (in)
K (in)
8T-9403
1.63
-12
2.82
2.00
0.94
2.36
0.43
0.41
1.27
1.63
1.10
0.53
6V-0400
1.87
-16
3.19
2.25
1.09
2.76
0.51
0.47
1.55
1.89
1.10
0.53
1P-5767
2.13
-20
3.75
2.63
1.25
3.07
0.53
0.56
1.70
2.16
1.10
0.53
5P-8077
2.50
-24
4.46
3.13
1.44
3.78
0.66
0.67
2.08
2.51
1.26
0.53
E = Hole Diameter F = Radius
A
Caterpillar Flange Split Flanges (for Metric Bolts)
B F C D
E
J K
G H
Dimensions in mm PART NUMBER
HEAD SIZE (mm)
FLANGE DASH SIZE
8T-9403
41.3
-12
71.6
50.8
23.8
60.0
11.0
10.4
32.3
41.5
28.0
13.5
6V-0400
47.6
-16
81.0
57.2
27.8
70.0
13.0
11.9
39.4
47.9
28.0
13.5
1P-5767
54.0
-20
95.3
66.7
31.8
78.0
13.5
14.3
43.3
54.8
28.0
13.5
5P-8077
63.5
-24
113.4 79.4
36.5
96.0
16.7
17.0
52.8
63.7
32.0
13.5
Flanges / Hardware
E = Hole Diameter F = Radius
282
A B C D E F G H J K (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
Pre-Install Flanges 2 Hole Flange (Pre-install) Must be installed on the coupling prior to assembly. PART NUMBER
USED ON COUPLINGS
2K-5056
5S-2420
2M-5762
6V-4652,6V-4659,6V-4662,6V-4665,6V-4669,6V-4672,6V-4673,6V-4676,6V-4677,6V-4679
3V-5642
7S-3122,2P-1313,1P-7930
6K-8298
6V-4652,6V-4659,6V-4662,6V-4665,6V-4669,6V-4672,6V-4673,6V-4676,6V-4677,6V-4679
4 Hole Flange (Pre-install) Must be installed on the coupling prior to assembly. PART NUMBER
USED ON COUPLINGS
5P-5052
6V-4652,6V-4659,6V-4662,6V-4665,6V-4669,6V-4672,6V-4673,6V-4676,6V-4677,6V-4679
Flanges / Hardware
283
Flanges / Hardware
Pre-Install Flanges
284
Hose Accessories Hose Clamps, Clips and Screw Types............................................................................... 286 Armor Guard...................................................................................................................... 288 Hose Accessories
285
Hose Clamps, Clips and Screw Types
Hose Accessories
Single Line Hose Clamps GROMMET GROMMET CLAMP I.D. PART PART A (in) (mm) NUMBER NUMBER
CLAMP HOSE TYPE/SIZE PART B XT-6™ XT-3™ NUMBER ES XT-6 XT-5™ ES 1956 716 294 844
0.75
19
6V-0683
5P-7462
5P-7463
-6
0.87
22
6V-1249
5P-7464
5P-7465
-8
0.94
24
8T-9518
5P-7468
5P-7469
0.98
25
6V-7359
5P-7464
5P-7465
1.06
27
6V-4349
5P-7468
5P-7469
1.18
30
5P-8112
5P-7466
5P-7467
1.22
31
6V-1874
5P-7468
5P-7469
1.34
34
8T-7087
5P-7468
5P-7469
1.46
37
5P-8444
5P-7468
5P-7469
1.57
40
8T-2525
5P-7468
5P-7469
1.73
44
6V-0545
5P-7468
5P-7469
1.81
46
5P-8182
5P-7470
5P-7471
1.89
48
6V-1875
5P-7470
5P-7471
2.05
52
5P-7703
5P-7470
5P-7471
2.20
56
6V-1574
6V-1572
6V-1573
2.56
65
6V-1869
6V-1867
6V-1868
-6
-6
-6
-8
-6
-8
-8
-10
-8
556/ 1028 2760 1130 1543J -8
-8
-10
-10
-12
-10 -8
-10
-10
-12 -12
-12
-12
-14
-12
-16
-12
-12
-12 -16
-12
-12
-16 -16
-16
-16
-16
-16
-20
-16
-24 -20 -20
-20
-20
-20
-20 -20
-24
-24 -24
-24
-24
-20
-24
-24
-24 -32
-32
Double Line Hose Clamps
286
GROMMET GROMMET CLAMP I.D. PART PART A (in) (mm) NUMBER NUMBER
CLAMP PART B NUMBER
0.79
20
6V-0974
3G-8057
3G-8054
0.87
22
3G-8047
3G-8057
3G-8054
1.02
26
8C-3174
3G-8057
3G-8054
1.18
30
7G-3832
7G-3834
7G-3833
1.22
31
6V-1876
7G-5985
7G-5984
1.34
34
8T-7088
7G-5985
7G-5984
1.46
37
7G-5986
7G-5985
7G-5984
1.57
40
8T-3440
7G-5985
7G-5984
1.81
46
7G-3415
7G-3413
7G-3414
1.89
48
6V-1877
6V-1575
6V-1576
2.05
52
6V-1324
7G-3413
7G-3414
2.20
56
6V-1577
6V-1575
6V-1576
2.56
65
6V-1872
6V-1870
6V-1871
HOSE TYPE/SIZE XT-6 ES
-8
XT-3 ES
1956
-6
-6
-6
-8
-8
-8
-8
-8
-10
-10
-10
-10
-12
-12
-12
-12
XT-6
XT-5
-12
716
294
-16
-16
-16
-16
-24
-16
-20
-12
-12
-14
-20
-20
-24
-24
-20 -24
-24 -32
-24 -32
-20 -24
-20
-24 -24
-12
-10 -10
-12
-20 -20
-8
-16
-16
-20
556/ 1028 2760 1130 1543J
-16
-12 -12 -16
844
Hose Clamps, Clips and Screw Types Screw-Type Hose Clamps - Uniform Load PART NUMBER
CLAMP SIZE MIN. - MAX. MIN. - MAX. (in.) (mm)
8T-4983
1 1/4 - 2 1/8
32-54
12.5
8T-6703
1 3/4 - 2 5/8
45-67
12.5
8T-4894
2 1/4 - 3 1/8
57-79
12.5
8T-6675
2 3/4 - 3 5/8
70-92
12.5
8T-4985
3 1/4 - 4 1/8
83-105
12.5
8T-4986
4 1/4 - 5 1/8
108-130
12.5
8T-4987
5 1/4 - 6 1/8
133-156
12.5
8T-4988
6
1/8
159-181
12.5
8T-4989
7 1/4 - 8 1/8
184-206
12.5
8T-4990
8 1/4 - 9 1/8
210-232
12.5
-7
Hose Accessories
1/4
BAND THICKNESS (mm)
Screw-Type Hose Clamps PART NUMBER
CLAMP SIZE MIN. - MAX. MIN. - MAX. (in.) (mm) 7/32
BAND THICKNESS (mm)
- 5/8
6-16
12.5
5D-1026
9/16
- 11/16
16-27
12.5
9M-7958
15/16
3/4
22-45
12.5
9M-0164
1 9/16 - 2 1/2
43-64
12.5
9M-7959
2 9/16 - 3 1/2
65-89
12.5
9M-6738
3 5/16 - 4 1/4
89-108
12.5
1P-4278
-1
Screw-Type Hose Clamps - Heavy Duty PART NUMBER
CLAMP SIZE MIN. - MAX. MIN. - MAX. (in.) (mm)
BAND THICKNESS (mm)
5P-2230
1 1/4 - 2
5P-0597
1
3/4
5P-0958
2 1/8 - 4 1/8
5P-0599
4 - 6 1/8
133-156
14.2
5P-0600
6-9
156-229
14.2
-2
5/8
32-54
14.2
45-67
14.2
54-105
14.2
NOTE: Heavy Duty Screw-Type Hose Clamps are made of Stainless Steel.
287
Armor Guard Bulk Metal Armor Guard Note: Sold by the centimeter. Hose Accessories
PART NUMBER
HOSE TYPE/DASH SIZE XT-6™ XT-6™ XT-5™ XT-3™ 1956 716 ES ES ES
GUARD I.D. (in) (mm)
294
844
9X-6186
0.56
14.2
-4
9X-2856
0.72
18.3
-6
-4-5
-5-6
6V-0743
0.94
23.8
-6
-6
-6
-6
-8
-6
-8
6V-0744
1.06
27.0
-8
-8
-8
-8
-10
-8
8C-7557
1.18
30.0
-10
-10
-12
6V-0745
1.34
34.0
-12
-12
6V-0756
1.41
35.8
6V-0746
1.65
42.0
6V-0747
2.01
51.0
6V-0752
2.17
55.0
6V-0748
2.28
58.0
6V-0757
2.41
61.3
6V-0749
2.83
71.8
6V-0754
2.97
75.5
-12
-3-4
-12 -12
-12 -16
-12
-16
-16 -20
-20
-12 -16
-16
-20 -20
-20
-16
-16
-20
-20
-24
-24 -24
-24
-20 -24
-24 -32
-16
-32
-24 -32
-32
-32
-32
NOTE: To find the proper bulk armor guard part number, first locate the appropriate hose type column in the chart above. Then, read down to find the hose inside diameter given in dash size and select the corresponding guard part number shown at the far left.
Bulk Air Conditioning (1543J) Armor Guard Note: Sold by the centimeter. CONTINUOUS SLIT
PART NUMBER
HOSE DASH SIZE
GUARD I.D. (in) (mm)
8C-5063
0.56
14.2
-5
8C-5064
0.70
17.8
-6
7X-7702
0.92
23.4
-10
Armor Guard Clip
288
1028
PART NUMBER
Min (in)
CLIP SIZE MAX MIN (in) (mm)
MAX (mm)
3E-4071
0.37
1.00
9.5
25.4
3E-4062
1.25
1.50
31.8
38.1
3E-4070
1.50
2.00
38.1
50.8
Armor Guard Nylon Abrasive Sleeve Steel Band Used to attach nylon abrasive sleeve to hose assemby. For other applications, use nylon cable ties. GUARD I.D. (in) (mm)
163-8811
1.37
34.9
163-8812
1.98
50.4
163-8813
3.00
76.2
163-8814
4.00
101.6
Hose Accessories
PART NUMBER
NOTE: Refer to the Tooling section of this guide for related assembly tooling.
Nylon Abrasive Sleeve For abrasion resistance and bundling of hose lines. PART NUMBER
GUARD I.D. (in) (mm)
160-2242
0.71
18.0
160-2243
1.00
25.4
160-2244
1.13
28.7
160-2245
1.25
31.8
-6
160-2246
1.59
40.4
-8
160-2247
1.75
44.5
-12
160-2248
2.07
52.6
160-2249
2.38
60.5
160-2250
2.54
64.5
160-2251
2.86
72.6
160-2252
3.34
84.8
XT-6™ ES
XT6
XT5™
HOSE TYPE/SIZE XT-3™ ES 1956
716
294
-4 -6
-4 -5 -6
-8 -10
844
-6
-16
-20 -24
-6
-12
-12
-16
-20 -24
-8
-8 -10
-8 -10
-10 -12
-12
-12
-12
-12
-16
-16
-16
-16
-20
-20
-20
-24
-24
-24
-24
-32
-32
-32
-16
-16
-20 -24
-20 -24
-32
-32
-32
NOTE: MSHA approved.
Light Duty Plastic Bulk Guard Note: Sold by the centimeter. PART NUMBER
GUARD I.D. (in) (mm)
WALL THICKNESS (in) (mm) XT-6 ES
7I-7439
0.51
0.07
13.0
XT6
XT5
HOSE TYPE/SIZE XT-3 ES 1956
1.8
716
294
-4 -6
-4 -5 -6
7I-1024
0.79
20.0
0.09
2.3
-6 -8
-6
-6 -8
-6 -8
-8 -10
-8
7Y-5074
0.98
25.0
0.11
2.8
-12
-8
-10 -12
-10
-12
-10 -12
844
-12
289
Armor Guard Heavy Duty Plastic Bulk Guard
Hose Accessories
Note: Sold by the centimeter.
290
PART NUMBER BLACK YELLOW
GUARD WALL I.D. THICKNESS XT-6™ (in) (mm) (in) (mm) ES
206-2722
206-2732
0.75 19.1
0.11
2.8
206-2723
206-2733
1.00 25.4
0.12
3.1
-6 -8
206-2724
206-2734
1.25 31.8
0.13
3.4
-12
206-2725
206-2735
1.50 38.1
0.14
3.6
206-2726
206-2736
2.00 50.8
0.16
4.1
206-2727
206-2737
2.50 63.5
0.21
5.3
206-2728
206-2738
3.00 76.2
0.22
5.5
206-2729
206-2739
3.50 88.9
0.25
6.4
206-2730
206-2740
4.00 101.6
0.25
6.4
USED PRIMARILY TO BUNDLE MULTIPLE HOSES
206-2731
206-2741
6.00 152.4
0.25
6.4
USED PRIMARILY TO BUNDLE MULTIPLE HOSES
XT6
HOSE TYPE/SIZE XT-3™ XT5™ ES 1956
-6 -8
716
294
-4 -6
-4 -5 -6
844
-6 -8
-6 -8
-8 -10
-8
-10 -12
-10
-12
-10 -12
-12
-16
-16
-16 -20 -16 -20 -16 -20 -16 -20
-16
-20
-20
-16
-12
-24
-24
-12
-12
-24
-24
-20 -24
-24
-24
-20 -24
-32
-32
-32
-32
-32
-32
USED PRIMARILY TO BUNDLE MULTIPLE HOSES
Tooling
291
Tooling
Product Selection............................................................................................................... 293 Considerations for Hose Assembly Machine Selection.................................................. 293 Production Machines...................................................................................................... 295 Variable Crimping Bowl, Smooth-bore Die Machines..................................................... 296 Stepped Die Machines................................................................................................... 297 Current Hose Assembly Machines..................................................................................... 299 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Crimputer II Radial Crimper... 299 150-2568 / 173-9805 XT™ Hose Assembly Machine (Replaces 4C-990)..................... 303 Variable Crimping Bowl and Smooth-bore Die Machines.................................................. 307 243-0765 Bench Model II Hose Assembly Machine....................................................... 307 209-3153 Portable Hose Assembly Machine................................................................. 310 Stepped Die Machines....................................................................................................... 313 145-5161 Floor Model Hose Assembly Machine............................................................ 313 139-5439 / 145-3381 Combination Hose Assembly Machine........................................ 315 150-3622 Bench Model Hose Assembly Machine.......................................................... 318 215-9672 Field Service Hose Assembly Machine.......................................................... 320 Reusable Coupling Tooling Groups................................................................................... 321 215-9673 Accessory Group............................................................................................ 321 131-3961 XT Hose Reclamation Tooling........................................................................ 322 4C-9902 XT-3™ ES Tool Group..................................................................................... 322 171-2528 XT-6™ and XT-5™ ES Tool Group................................................................ 323 188-2157 XT-6 ES Accessory Group (1.50 Inch)........................................................... 324 265-5818 XT-6 ES Accessory Group (2.00 Inch)........................................................... 325 226-7150 Hose Gauge Kit - Reusable Coupling............................................................ 326 Permanent Die Groups...................................................................................................... 327 Permanent Coupling Die Groups.................................................................................... 327 Hose Cutting Machines and Fume Exhauster Attachments............................................... 328 6V-6015 / 250-6807 Hose Cutting Machines.................................................................. 328 251-1207 / 250-6808 Fume Exhausters......................................................................... 329 223-2105 Hose Cut-Off Saw.......................................................................................... 330 Hose Cleaning Groups....................................................................................................... 331 233-7193 Hose Cleaner Group...................................................................................... 331 233-7192 Hose Cleaner Group...................................................................................... 332 233-7191 Hose Cleaner Group...................................................................................... 333 265-4959 Hose Cleaner Group...................................................................................... 334 Projectile Application Information................................................................................... 335 Application Charts for Hose Cleaner Groups................................................................. 336 Miscellaneous Tooling and Accessories............................................................................ 339 164-2691 Printer Group.................................................................................................. 339 Hydraulic Pumps............................................................................................................ 340 Skiving Vise and Block Group........................................................................................ 341 1U-8760 Chain Wrench.................................................................................................. 341 Thermoplastic and Air Conditioning Hose Cutter........................................................... 342 166-5853 Nylon Abrasion Sleeve Band Tool.................................................................. 342 Crimp Measuring Tools and Accessories....................................................................... 343 8T-0450 Thread Measurement Kit.................................................................................. 343
Tooling
Tooling
266-7533 Large-bore Protractor..................................................................................... 344 Snap-to-Connect Coupling Wrenches............................................................................ 344 Service Parts for Current Hose Assembly Machines......................................................... 345 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Crimputer II Radial Crimper... 345 150-2568 / 173-9805 XT™ Hose Assembly Machines................................................... 350 243-0765 Bench Model II Hose Assembly Machine....................................................... 351 209-3153 Portable Hose Assembly Machine - Service Parts......................................... 352 145-5161 Floor Model Hose Assembly Machine............................................................ 353 139-5439 / 145-3381 Combination Hose Assembly Machine........................................ 359 Service Parts for Non-Current Hose Assembly Machines................................................. 362 4C-3360 / 4C-5051 / 4C-5053 / 9U-5792 / 9U-7261 Hose Assembly Machines............ 362 7S-1100 Hose Assembly Machine................................................................................. 363 7S-1100 Tool Group for XT Hose Assembly.................................................................. 364 5P5255 Collet Group for XT-6™ and XT-5™ ES Hose Assembly................................. 365
292
Product Selection Considerations for Hose Assembly Machine Selection There have been some significant changes in the area of tooling this past year – specifically with the introduction of smooth-bore dies and the new machines that use them. Die Design Dealer Service Tools introduced smooth-bore dies to improve versatility and to reduce the proliferation of new dies required as new hose and couplings are introduced and serviced through the bulk program. Stepped dies remain available both for parts service and for use with some of our earlier machines that require them. Complete details on what dies — smooth-bore or stepped – you should order with each machine are contained in the step-by-step ordering instructions given with the individual article under “Current Hose Assembly Machines”.
Choosing your Machines Caterpillar offers several hose machines. Which best fits your needs depends on the volume and product mix that drives your hose assembly operations. For full details of assembly capabilities, please see the crimp charts and explanations on the “Product Selection” pages that follow. Since there are many different machines available, we have attempted to structure the “Product Selection” pages in a manner that simplifies your decision-making process. Production Machine Recommendations: Cat Crimputer II Radial Crimper and the XT™ Hose Assembly Machine for Your Production Shops in Main and High-volume Branch Stores. The first section, “Production” machines, lists the two machines that we believe will satisfy the majority of your hose shop requirements. If your shop crimps large-bore (over 2 inch I.D.) hose, only the Radial Crimper will fill this need. Our new flagship, the Radial Crimper, is available in five different voltages, and four European Union compliant configurations, to satisfy worldwide application requirements and is the first machine listed in the coming pages. Most of you will also need to assemble reusable couplings as well and will, therefore, also need a second machine: the XT Hose Assembly Machine. The Radial Crimper does not have that capability, and Dealer Service Tools recommends the XT Hose Machine as your best choice for assembling hose with reusable couplings.
293
Tooling
New Machines Several new machines have been added in this past year to take advantage of the new smoothbore design concept, lower costs, and provide specialized tooling solutions such as on-site service machines for field application.
Product Selection Non-Production Machine Options: The last two Product Selection sections are “Smooth-Bore Die Machines” and “Stepped Die Machines.” These sections present a number of other options that you can consider for branch or rental stores, redistribution centers, and locations that will not require full assembly capability. None of these options listed under these two sections can provide you with the capability to assemble all current Caterpillar products. Details on each machine’s capabilities are provided in the individual machine articles. Under “Smooth-Bore Die Machines,” the two new machines that utilize smooth-bore dies with the new Variable Crimping Bowl are listed - the Bench Model II and the Portable Hose Machines.
Tooling
Under “Stepped Die Machines,” our existing machine offerings are listed including the Floor Model, Combination Machine, Bench Model, and XT™ Field Service Hose Assembly Machine (for XT-3™ ES reusable couplings). Some production shops will require additional capacity to the combined capabilities of Cat Crimputer II Radial Crimper and the XT Hose Asembly Machine. Caterpillar’s Recommendation: Combination Machine as the best third machine choice because it can service both XT Reusable Couplings and crimp-on couplings. What to Order Once you have selected the machines you wish to order, please turn to the individual articles for those machines and follow the step-by-step ordering instructions for each machine.
294
Product Selection Production Machines Cat Crimputer II Radial Crimper Cat Dealer Service Tools now offers a full line of variable crimping hose machines. The flagship is the Cat Crimputer II Radial Crimper hose machine. The radial crimper employs smooth-bore dies to crimp a maximum O.D. of 4.37 in (111 mm), which provides more versatility with a significantly reduced number of dies. The unit is compact enough for bench-top use, or it can be installed on an optional cart for shop operations. This machine delivers size and capacity for your production shop or branch store. Five models of this machine are available worldwide. Four models are European Union compliant. The Cat Crimputer II Radial Crimper is for permanent couplings only.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10 -12 -16 -20 -24 -32 -40 -48 -56
XT-6™ ES
n
n
n
XT-6
n
n
n
n
n
XT-5™ ES
n
n
n
XT-3™ ES
n
n
n
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
716
n
294
n
n
844 1028
n
2760
n
n
n
n
n
n
n
n
n
n
-24
-32
n
n Indicates hose machine will crimp these coupling sizes.
The Cat XT Hose Machine services all current sizes of XT Hose and Reusable Couplings. XT tooling is required to service the reusable couplings. When equipped with the optional, Cat Variable Crimping Bowl Assembly and the smooth-bore die set, this machine also crimps some permanent couplings.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6 ES
n
n
n
a
XT-6
n
n
-14
-16
-20
n
XT-5 ES
n
XT-3 ES
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
716
n
294
n
n
844 1028 2760 1543
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes. aHose machine will crimp XT-6 ES -12 if the variable-crimping bowl assembly is used with smooth-bore dies.
295
Tooling
Cat 150-2568 / 173-9805 (EU compliant) XT Hose Machine
Product Selection Variable Crimping Bowl, Smooth-Bore Die Machines 243-0765 Bench Model II Hose Machine The new 243-0765 Bench Model II Hose Machine also uses the new Cat Variable Crimping Bowl Assembly and smooth-bore dies for crimping permanent couplings. This patented product allows the technician to dial the bowl for crimp sizes from 0.47 in (12 mm) to 2.07 in (53 mm) O.D. The Bench Model II provides an excellent machine for your non-production operation, branch or redistribution center.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6
n
n
-14
-16
-20
n
n
n
n
n
n
n
n
1956
n
n
n
n
n
n
716
n
n
n
n
n
n
n
n
294
n
n
n
n
n
n
n
n
n
n
n
844
1028
n
2760
n
n
n
n
n
n
n
n
n
-24
-32
n
XT-3™ ES
n
-32
n
XT-5™ ES
1543
-24
n
n
n
n
n Indicates hose machine will crimp these coupling sizes.
Tooling
209-3153 Portable Hose Machine The 209-3153 Portable Hose Machine, like the Bench Model II Hose Machine, employs the Cat Variable Crimping Bowl Assembly and smoothbore dies for crimping permanent couplings. The portable machine is lightweight and folds for easy storage. The 209-3153 Portable Hose Machine is an ideal solution for your service vehicle applications.
Hose Type
Dash Size -3
-4
-5
-6
-8
XT-6 ES
n
n
XT-6
n
n
-10
XT-5 ES
-14
-16
-20
n
XT-3 ES
n
n
n
n
n
1956
n
n
n
n
n
716
n
n
n
n
n
n
n
n
294
n
n
n
n
n
n
n
n
n
n
n
844 1543 1028 2760
Cat Variable Crimping Bowl and Smooth-bore Dies
-12
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes.
The revolutionary, new Cat Variable Crimping Bowl Assembly, when used with smooth-bore dies, offers a lower-cost alternative to the standard stepped dies. The crimping bowl assembly features a micrometer-style adjustment that provides nearly infinite height adjustment of each die without the use of spacer plates required with standard dies. Raising or lowering of the crimping bowl effectively increases or decreases the finished crimp diameter, respectively. This new technology requires significantly fewer smooth-bore dies to cover the same hose and coupling size range of stepped dies, allowing coverage of new sizes when new hose and couplings are released. Further, the variable bowl technology maintains the accuracy and repeatability of positive stops associated with stepped dies. Two simple, additional steps are required: the operator must mark the crimp length on the hose assembly and position the mark at the top of the die for crimping. Previously, the crimp length was controlled by the step in the die.
296
Product Selection Stepped Die Machines 145-5161 Floor Model Hose Assembly Machine The 145-5161 Floor Model Hose Assembly Machine provides a production oriented and easy-to-use machine for crimping all permanent XT Couplings up to 2 in (50.8 mm) -32. The 145-5161 Floor Model Hose Assembly Machine requires a Crimputer I to operate.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6™
n
n
-14
-16
-20
-24
-32
n
n
XT-5™ ES
n
n
a
XT-3 ES
n
n
n
n
n
a
a
a
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
-24
-32
716
n
294
n
n
844 1028
n
2760
n
n
n
n
n
n
n
n
n
n
1543
n
n
n
n
nIndicates hose machine will crimp these coupling sizes. aFor competitive mobile equipment applications.
Tooling
139-5439/145-3381 Combination Hose Assembly Machines The 139-5439 and 145-3381 Combination Hose Assembly Machines will assemble and disassemble all sizes of XT™ Hose and XT Reusable Couplings. These same machines will crimp all permanent couplings through 1.25 in (31.8 mm), -20 size using traditional stepped dies and spacer rings. An optional Crimputer is available and recommended.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6 ES
n
n
n
n
XT-6
n
n
-14
-16
-20
n
XT-5 ES
n
n
XT-3 ES
n
n
n
n
n
a
1956
n
n
n
n
n
n
n
n
n
n
n
n
r
r
n
n
n
n
n
n
r
r
n
n
n
r
r
716
n
294
n
n
844 1028 2760 1543
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes. r Indicates hose machine can crimp if the machine is set up with additional -24 or -32 tooling. aFor competitive mobile equipment applications.
297
Product Selection Stepped Die Machines 150-3622 Bench Model Hose Assembly Machine
Hose Type
The 150-3622 Bench Model Hose Assembly Machine crimps all permanent couplings through 1.25 in (31.8 mm) (-20) size. This machine uses the same spacer rings as the XT™ Hose Assembly Machines.
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6
n
n
-14
-16
-20
n
n
n
XT-3™ ES
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
294
n
n
844 1028 2760 1543
n
n
n
n
n
n
n
n
n
n
n
-32
n
XT-5™ ES
716
-24
n
n
n
n
Tooling
n Indicates hose machine will crimp these coupling sizes.
215-9672 Field Service Hose Assembly Machine The 215-9672 Field Service Hose Assembly Machine assembles XT-3 ES Hose and Reusable Couplings through 1.25 in (31.8 mm) (-20) size. This machine does not handle XT-5 ES, XT-6 or XT-6 ES Hose and Reusable Couplings. It does not crimp permanent couplings.
298
Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper • One part number includes the hose assembly machine, the Crimputer II, and power supply. • Crimps permanent couplings on all hose types and sizes up to 4.37 in (111 mm), excluding 1543 air conditioning hose.
Hose Type
Dash Size -6
-8
-10 -12 -16 -20 -24 -32 -40 -48 -56
XT-6™ ES
n
n
n
XT-6
n
n
-3
-4
-5
n
n
n
XT-5™ ES
n
n
n
XT-3™ ES
n
n
n
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
716
n
294
n
n
844 1028 2760
Tooling
• Large bore opening allows installation of couplings with large flanges and tight bends. • Smooth-bore dies significantly reduces the number of dies required. • Die sets are available on an individual basis. Die sets are not included in the machine package. • Crimputer II included. • Not for reusable couplings. Specifications Radial crimping force 2400 kN (270 tons) Maximum pressing diameter 4.37 in (111 mm) O.D. Maximum die length 4.3 in (110 mm) Maximum coupling clearance 1.8 in (45 mm) plus die dimension Electric motor 4.8 hp (3.6 kW) Hydraulic pump 2.4 gpm (9 L/min), 4,061 psi (27 580 kPa) Hydraulic reservoir 10.6 gallons (40 L) Nominal machine dimensions L 29.5 in (75 cm) X W 20.9 in (53 cm) X H 26.4 in (67 cm) Weight (without oil) 397 lb (180 kg) Weight (with oil) 507 lb (230 kg)
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes.
What To Order: Step 1 - Choose the correct part number that meets your power requirements. Make sure that you select a European Union compliant machine if necessary. Step 2 - Decide whether or not you want an optional cart with die racks, the printer group, or the additional lubricant listed under “Options” shown on the following page.
299
Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper Step 3 - Choose the die groups you need from the selection below. Dash#
Type XT-6™ ES
XT-6
XT-5™ ES XT-3™ ES
1956
716
294
844
-3
2760
233-8050
-4
233-8052
-5
233-8052
233-8051
233-8050
233-8053
233-8051
233-8051
-6
233-8053
233-8053
233-8053
233-8053
233-8053
233-8053
233-8052
233-8052
-8
233-8054
233-8054
233-8054
233-8054
233-8054
233-8054
233-8053
233-8052
-10
233-8055
233-8054
233-8054
233-8055
233-8055
-12
233-8056
233-8056
233-8055
233-8056
233-8055
233-8056
233-8056
-16
233-8058
233-8058
233-8057
233-8058
233-8058
233-8058
233-8058
233-8061
233-8060
233-8060
233-8061
233-8061
233-8061
233-8062
233-8063
233-8063
233-8063
233-8063
233-8065
233-8066
233-8066
233-8066
233-8066
233-8068
233-8069
-20
233-8057
-24 -32 -40 Tooling
1028
-48
233-8071
-56
233-8086
233-8055
Standard Machine Packages 286-4354 Crimputer II Radial Crimper (480-volt, 60 Hz, 3 Phase) 233-8038 Crimputer II Radial Crimper (415-volt, 50 Hz, 3 Phase)* 286-4355 Crimputer II Radial Crimper (400-volt, 50 Hz, 3 Phase)* 275-6199 Crimputer II Radial Crimper (380-volt, 50 Hz, 3 Phase)* 286-4353 Crimputer II Radial Crimper (230-volt, 50/60 Hz, Single Phase)* *European Union compliant, CE marked Each Standard Machine Package Includes: 233-8030 Crimputer II Group Hose Machine Rack (for Quick-Change Dies) Tool, Die Changer Tool, Die Release
Options 243-0444 Hose Machine Cart with three die racks (Non quick-change dies) 275-4128 Aerosol Spray Lubricant 164-2691 Printer Group: Printer (European Union compliant), includes: 164-2693 Ribbon (Qty. 1) 164-2695 Power Supply (110/230V, 60/50 Hz, European Union compliant) Paper (not serviced, must be purchased locally) Manual, “Using the 164-2691 Printer Group”
300
Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper 286-4354 Variable Crimping Hose Machine Group (480 Volts) Item
Qty.
Part No.
Description
1
1
233-8030
Crimputer II Group
2
1
233-8026
Hose Machine
3
2
233-8075
Rack - Quick-Change Die Group
4
1
233-8046
Die Changer Tool
5
1
233-8047
Die Release Tool
6
1
NEHS0870
Tool Operating Manual
286-4353 Variable Crimping Hose Machine Group (230 Volts, Single Phase) Item
Qty.
Part No.
Description
1
1
233-8030
Crimputer II Group
2
1
233-8027
Hose Machine
3
2
233-8075
Rack - Quick-Change Die Group
4
1
233-8046
Die Changer Tool
5
1
233-8047
Die Release Tool
6
1
NEHS0870
Tool Operating Manual
233-8038 Variable Crimping Hose Machine Group (415 Volts) Die Group Die Set Specifications
Item
Qty.
Part No.
Description
1
1
233-8030
Crimputer II Group
Part No.
Diameter
2
1
233-8037
Hose Machine
233-8082
Adapter Die Set — 233-8077
3
2
233-8075
Rack - Quick-Change Die Group
239 Die Set Series (Requires 233-8082 Adapter)
4
1
233-8046
Die Changer Tool
233-8049
.35 in (9.0 mm)
233-8081
5
1
233-8047
Die Release Tool
233-8050
.47 in (12.0 mm)
233-8081
233-8051
.55 in (14.0 mm)
233-8081
6
1
233-8083
Die Group, (26 Sets)
233-8052
.67 in (17.0 mm)
233-8081
7
1
NEHS0870
Tool Operating Manual
233-8053
.79 in (20.0 mm)
233-8081
Pin Bore Retention Retention Pin1
.94 in (24.0 mm)
233-8081
233-8055
1.10 in (28.0 mm)
233-8081
Item
233-8056
1.26 in (32.0 mm)
233-8081
233-8057
1.42 in (36.0 mm)
233-8081
Qty.
Part No.
Description
1
1
233-8030
Crimputer II Group
233-8058
1.57 in (40.0 mm)
233-8081
2
1
233-8035
Hose Machine
233-8059
1.73 in (44.0 mm)
233-8081
3
2
233-8075
Rack - Quick-Change Die Group
233-8060
1.85 in (47.0 mm)
233-8081
233-8061
1.97 in (50.0 mm)
233-8061
233-8062
2.13 in (54.0 mm)
233-8081
233-8063
2.24 in (57.0 mm)
233-8081
233-8064
2.44 in (62.0 mm)
233-8081
4
1
233-8046
Die Changer Tool
5
1
233-8047
Die Release Tool
6
1
NEHS0870
Tool Operating Manual
Tooling
233-8054 286-4355 Variable Crimping Hose Machine Group (400 Volts)
232 Die Set Series 275-6199 Variable Crimping Hose Machine Group (380 Volts)
233-8065
2.64 in (67.0 mm)
233-8077
Item
Description
233-8066
2.80 in (71.0 mm)
233-8077
Crimputer II Group
233-8067
2.91 in (74.0 mm)
233-8077
233-8068
3.07 in (78.0 mm)
233-8077
233-8069
3.31 in (84.0 mm)
233-8077
1 2
Qty. 1 1
Part No. 233-8030 233-8033
Hose Machine
3
2
233-8075
Rack - Quick-Change Die Group
233-8070
3.39 in (86.0 mm)
233-8077
4
1
233-8046
Die Changer Tool
233-8071
3.54 in (90.0 mm)
233-8077
5
1
233-8047
Die Release Tool
233-8072
3.78 in (96.0 mm)
233-8077
233-8073
4.06 in (103.0 mm)
233-8077
6
1
NEHS0870
Tool Operating Manual
233-8086 4.21 in (107.0 mm) 233-8077 1 Retention pins should be replaced when they are damaged. Always replace pins in sets of 8. Package quantity is 8 per package.
301
Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper 36
67
67
9
36
36
86
9
9
86
3 2
36
9
36
86
67
9
86
67
36
9 9
36
36
86
67
9
86
67
Ø36 DIE SET
12
40
12
86
86
Ø67 DIE SET
40
12
67
67
40
Ø9 DIE SET
Ø86 DIE SET
40 40
12
12
40 40
40
Ø40 DIE SET 71
71
90
71
90
Ø12 DIE SET
90
12 12
12
90
71
44
44
71
14
14
44
90
71
14
90
14
44
44
14
44
14 14
71
71
44
44
Ø14 DIE SET
Ø44 DIE SET
90
90
Ø71 DIE SET
4 1
Ø90 DIE SET
47
14
17
17
47
17
47
47 47
17
17
47 47
74
96
74
74
96 96
74
74
Ø47 DIE SET
96
47
Ø17 DIE SET
96
17 17
17
96
74 74
50
20
50
20
96
96
50
20
74
50
20
50
20
50
20 20
20
50
50
Ø74 DIE SET
Ø96 DIE SET
Ø50 DIE SET
24
24
24
54
54
54
24
5 1
54
Ø20 DIE SET
78
78 54
3 10
24
103
78
54
54
3 10
54
24 24
24
103
78
103
78
3 10
Ø54 DIE SET
78
Ø24 DIE SET
78
78
103
3 10
57
57
57
28
28
28
Ø78 DIE SET
57
Ø103 DIE SET
57
28
28
57
28
57
Ø28 DIE SET
57
Ø57 DIE SET 84
28
28
84
84 32
32
32
84
32
84
32
32
Tooling
84
32
32
84
Ø32 DIE SET
84
Ø62 DIE SET ADAPTER DIE SET
Ø84 DIE SET
6 1
2 1
1 1 233-8025 Crimputer II R
1
2
3
4
5
6
7
8
9
0
.
ENTER
UNDO
RESET
POWER
R
0870-145
302
Current Hose Assembly Machines 150-2568 / 173-9805 XT™ Hose Assembly Machine (Replaces 4C-9900) • Primary machine for assembling reusable couplings • Assembles/disassembles all sizes of XT hose reusable couplings • Crimps some permanent couplings • Tooling also used on XT Hose Assembly Machines 6V-4880, 1U-9160, 173-9805 and 4C-9900 • 173-9805 is European Union compliant, CE marked version of 150-2568. The 173-9805 XT Hose Assembly Machine is a complete machine that includes a power supply, a stand, the hoses and all of the components requiredto plumb the power supply to the machine.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
XT-6™ ES
n
n
n
XT-6
n
n
-12
-14
-16
-20
Tooling
n
XT-3™ ES
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
716
n
294
n
n
844
2760 1543
-32
n
XT-5™ ES
1028
-24
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes.
What To Order: Step 1 - Choose the correct machine. Make sure that you order 173-9805 if you need a European Union compliant machine. If you order 173-9805, skip to Step 3. Step 2 - If you order 150-2568 (non European Union compliant), choose the power supply you need and order the parts to connect the power supply to the hose assembly machine. Step 3 - Choose the related tooling need to disassemble and assemble XT Reusable Couplings. Step 4 - Select the tooling required for crimping permanent couplings. Step 5 - Select the dies required for crimping permanent couplings.
303
Current Hose Assembly Machines 150-2568 / 173-9805 XT™ Hose Assembly Machine (Replaces 4C-9900) Step 3 Power Supply Required (for the 150-2568 XT Hose Assembly Machine only) Note: Caterpillar highly recommends using 1-1/2 horsepower power supply with this hose assembly machine. 1/2 Horsepower • 2P-5550 115V, 50/60 Hz • 2P-5500 230V, 50/60 Hz
Minimum 15 Amp circuit required Minimum 15 Amp circuit required
1-1/8 Horsepower • 3S-6224 115V, 50/60 Hz • 8S-8033 230V, 50/60 Hz
Minimum 20 Amp circuit required Minimum 15 Amp circuit required
1-1/2 Horsepower • 1U-5555 115V, 50/60 Hz Minimum 25 Amp circuit required • 1U-5565 230V, 50 Hz Minimum 15 Amp circuit required • 4C-5080 230V, 60 Hz Minimum 15 Amp circuit required • 171-5397 230V, 50 Hz (CE)* Minimum 15 Amp circuit required (A foot switch is included only with the 1-1/2 HP pumps.)
Tooling
NOTE: All pumps are single phase. 4C-5080 features a quiet, low rpm induction motor.
Additional Parts Necessary to Plumb the Power Supply to the 150-2568 XT Hose Assembly Machine. The 173-9805 XT Hose Assembly Machine, which is European Union compliant and “CE”* marked, includes the components. Do not order the components in the chart for the 173-9805 XT Hose Assembly Machine. Quantity
Part No.
Description
2
8F-0024
Hose
2
135-2535
Fitting
2
135-2536
Fitting
1
136-2060
Fitting
1
136-2061
Fitting
2
136-2068
Fitting
2
1P-2375
Coupler
2
1P-2376
Coupler
Note: If you need a gauge, other fittings are required. Use only 10,000 psi rated fittings. * The “CE” mark indicates compliance with applicable directives of the European Committee for Standards.
304
Current Hose Assembly Machines 150-2568 / 173-9805 XT™ Hose Assembly Machine (Replaces 4C-9900) Step 3 Tooling Required for Disassembling and Assembling XT Hose and Reusable Couplings. 215-9673
Accessory Group
*197-5391
Stem Expander, 3/4 inch, XT-6 ES
171-2528
XT-5™ ES and XT-6™ Hose Tool Group
*197-5392
Stem Pusher, 3/4 inch, XT-6 ES
4C-9902
XT-3™ ES Hose Tool Group
*197-5393
Pusher Assembly, 3/4 inch (used with existing 6V-4961 Mandrel), XT-6 ES
226-7150
Cutting and Skiving Accessory Kit
*197-5394
Stem Pusher, 1 inch, XT-6 ES
188-2157
XT-6 ES 1.5 inch Accessory Group
*197-5395
Pusher Assembly, 1 inch (used with existing 6V-4963 Mandrel), XT-6 ES
265-5818
XT-6 ES 2.0 inch Accessory Group
*197-5396
Stem Expander, 1 inch, XT-6 ES
Additional individual tooling required to assemble XT-6 ES -12 and -16 size couplings NOTE: Refer to Reusable Coupling Tooling Groups for a complete list of part numbers included in each group.
Step 4 Tooling Required for Crimping Permanent Couplings. 4C-6601
Stand, Tilt Variable Crimping Bowl Assembly
133-7362
Die Rest
135-4561
Die Separator
140-9360
Separator Ring
4C-4375
Spring
4C-4376
Snap Ring
NEEG3000
Die Selection and Crimp Bowl Settings Chart
*243-0579
Sleeve
136-3642
Crimp Tool Group
Tooling
242-3567
*243-0579 Sleeve must be ordered if the existing sleeve in the 136-3642 Crimp Tool Group is not modified. NOTE: Non-tilting stand also available (6V-4974).
305
Current Hose Assembly Machines 150-2568 / 173-9805 XT™ Hose Assembly Machine (Replaces 4C-9900) Step 5 Order the smooth-bore die groups and NEEG3000 Crimp Chart required with Variable Crimping Bowl for Crimping Permanent Couplings. Smooth-bore Dies for Hydraulic and Thermoplastic Hoses
Dies for Air Conditioning Hose Assemblies Hose Size
4C-3675
-6
4C-3676
-8
Tooling
Part Number
214-2155
-10
4C-3677
-12
189-0990
-14
Order: NEEG3000 Crimp Chart Reference: Information Release Memo HOS 04-01
306
Part Number
Finished Crimp Diameter mm (inch)
241-9133
12.00 - 13.99 (0.472 -0.551)
241-9134
14.00 - 15.99 (0.551 - 0.630)
241-9135
16.00 - 17.99 (0.630 - 0.708)
241-9136
18.00 - 19.99 (0.709 - 0.787)
241-9137
20.00 - 21.99 (0.787 - 0.866)
241-9138
22.00 - 23.99 (0.866 - 0.944)
241-9139
24.00 - 25.99 (0.945 - 1.023)
241-9140
26.00 - 27.99 (1.024 - 1.102)
241-9141
28.00 - 29.99 (1.102 - 1.181)
241-9142
30.00 - 32.99 (1.181 - 1.299)
241-9143
33.00 - 36.99 (1.299 - 1.456
241-9144
37.00 - 39.99 (1.457 - 1.574)
241-9145
40.00 - 42.99 (1.575 - 1.693)
241-9146
43.00 - 47.99 (1.693 - 1.889)
220-8686
48.00 - 49.99 (1.890 - 1.968)
241-9147
50.00 - 52.99 (1.969 - 2.074)
Variable Crimping Bowl and Smooth-bore Die Machines 243-0765 Bench Model II Hose Assembly Machine • Excellent choice for low-volume branch and rental stores • Crimps hose diameters up to 1.25 inch (31.8 mm) • Employs new variable crimping bowl and smooth-bore die technology. Requires only 16 smooth-bore dies for hydraulic and thermoplastic hose and five additional dies for the full range of air conditioning hose. • Flexible installation... can be mounted on a bench or on an optional stand
Dash Size
Hose Type -3
-4
-5
-6
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6
n
n
-14
-16
-20
n
n
n
XT-3™ ES
n
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
294
n
n
n
n
n
n
n
n
n
n
n
844
1028 2760
n
n
n
n
n
n
n
n
n
n
n
n
Tooling
716
n
-32
n
XT-5™ ES
1543
-24
n
n
n Indicates hose machine will crimp these coupling sizes.
What To Order: Step 1 - Order the machine part number. Step 2 - Choose the appropriate power supply based on whether or not you need a European Union compliant, “CE” marked machine or not. Order the hose assembly required for the power supply. Step 3 - Order the crimping bowl assembly along with the five additional parts shown in the chart. Step 4 - Choose the appropriate dies, shown on following pages, that you will need based on the hose assembly sizes that you service, and order the NEEG3000 Crimp Chart.
307
Variable Crimping Bowl and Smooth-bore Die Machines 243-0765 Bench Model II Hose Assembly Machine Step 2 Power Supply Required Dealer Service Tools offers two power supplies that will meet the hydraulic requirements of the 243-0765 Bench Model II Hose Assembly Machine. They are: • 161-5717 Power Supply (115/230 dual voltage, single phase) • 163-5309 Power Supply (230 volt, single phase) European Union compliant, “CE” marked Also Required:
• 162-1410 Hose Assembly
Step 3 Variable Crimping Bowl Required • Innovative design employs precision internal threads and external barrel scale
Tooling
• Similar to a micrometer, bowl provides nearly infinite adjustment for the smooth-bore dies • Technician simply twists the bowl to adjust thickness • Eliminates the need for spacer rings used with stepped dies • Significantly fewer smooth-bore dies needed to service the same range of hose and coupling sizes in comparison with stepped dies Five additional parts are required in order to use the 242-3567 Crimping bowl Assembly. They are:
308
133-7362
Die Rest
135-4561
Die Separator
140-9360
S e parator Ring
4C-4375
S pring
4C-4376
Snap Ring
Variable Crimping Bowl and Smooth-bore Die Machines 243-0765 Bench Model II Hose Assembly Machine Step 4 Order the smooth-bore dies required, and order the NEEG3000 Crimp Chart. • The smooth-bore die technology, when used with the 242-3567 Crimping Bowl Assembly, requires significantly fewer dies in comparison to stepped die systems. • Smooth-bore dies rely on the technician to control the crimp length. This is easily accomplished by marking the appropriate crimp length on the coupling and aligning the mark at the top of the die for crimping.
Dies for Air Conditioning Hose Assemblies Part Number
Hose Size
4C-3675
-6
4C-3676
Smooth-bore Dies for Hydraulic and Thermoplastic Hoses Finished Crimp Diameter mm (inch)
-8
241-9133
12.00 - 13.99 (0.472 -0.551)
214-2155
-10
241-9134
14.00 - 15.99 (0.551 - 0.630)
4C-3677
-12
241-9135
16.00 - 17.99 (0.630 - 0.708)
-14
241-9136
18.00 - 19.99 (0.709 - 0.787)
241-9137
20.00 - 21.99 (0.787 - 0.866)
241-9138
22.00 - 23.99 (0.866 - 0.944)
241-9139
24.00 - 25.99 (0.945 - 1.023)
241-9140
26.00 - 27.99 (1.024 - 1.102)
241-9141
28.00 - 29.99 (1.102 - 1.181)
241-9142
30.00 - 32.99 (1.181 - 1.299)
241-9143
33.00 - 36.99 (1.299 - 1.456
241-9144
37.00 - 39.99 (1.457 - 1.574)
241-9145
40.00 - 42.99 (1.575 - 1.693)
241-9146
43.00 - 47.99 (1.693 - 1.889)
220-8686
48.00 - 49.99 (1.890 - 1.968)
241-9147
50.00 - 52.99 (1.969 - 2.074)
189-0990
Tooling
Part Number
309
Variable Crimping Bowl and Smooth-bore Die Machines 209-3153 Portable Hose Assembly Machine • Ideal for service vehicle applications • Easily fits on a sliding shelf, yet folds for storage • Air-powered, hydraulic power supply runs off service vehicle’s air compressor • Crimps the hose sizes shown in the chart below. Note: the 209-3153 Portable Hose Assembly Machine is not European Union compliant.
Dash Size
Hose Type -3
-4
-5
-6
-8
XT-6™ ES
n
n
XT-6
n
n
-10
-14
-16
-20
XT-3™ ES
n
n
n
n
n
1956
n
n
n
n
n
716
n
n
n
n
n
n
n
n
294
n
n
n
n
n
n
n
n
n
n
n
844 1543
1028 2760
-24
-32
n
XT-5™ ES
Tooling
-12
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes.
What to Order: Step 1 - Order the machine part number. Step 2 - Order the power supply and components, shown in the following pages, required to plumb the power supply to the hose assembly machine. Step 3 - Order the crimping bowl assembly along with the five additional parts listed in the chart, shown on the following pages. Step 4 - Choose the appropriate dies, shown on following pages, that you will need based on the hose assembly sizes that you service, and order the NEEG3000 Crimp Chart.
310
Variable Crimping Bowl and Smooth-bore Die Machines 209-3153 Portable Hose Assembly Machine Step 2 Power Supply Required Dealer Service Tools offers an air-powered power supply that meets the hydraulic requirements of the 209-3153 Portable Hose Assembly Machine. The following chart shows the part numbers of the power supply and five additional parts that are required to plumb the power supply to the hose assembly machine. 236-6600
Power Supply
Requires the following additional parts 135-2536
Adapter Fitting
136-2066
Adapter Fitting
1P-2375
Quick Disconnect Fitting
162-1410
Hose Assembly
*
Fitting (3/8 inch male pipe)
* Dealer must supply an air fitting that is compatible with the service vehicle’s air source.
Tooling
Step 3 Variable Crimping Bowl Required • Innovative design employs precision internal threads and external barrel scale • Similar to a micrometer, bowl provides nearly infinite adjustment for the smooth-bore dies • Technician simply twists the bowl to adjust thickness • Eliminates the need for spacer rings used with stepped dies • Significantly fewer smooth-bore dies needed to service the same range of hose and coupling sizes in comparison with stepped dies Five additional parts are required in order to use the 242-3567 Crimping bowl Assembly. They are: 133-7362
Die Rest
135-4561
Die Separator
140-9360
Separator Ring
4C-4375
Spring
4C-4376
Snap Ring
311
Variable Crimping Bowl and Smooth-bore Die Machines 209-3153 Portable Assembly Machine Step 4 Order the smooth-bore dies required, and order the NEEG3000 Crimp Chart. • The smooth-bore die technology, when used with the 242-3567 Crimping Bowl Assembly, requires significantly fewer dies in comparison to stepped die systems. • Smooth-bore dies rely on the technician to control the crimp length. This is easily accomplished by marking the appropriate crimp length on the coupling and aligning the mark at the top of the die for crimping.
Dies for Air Conditioning Hose Assemblies Hose Size
4C-3675
-6
4C-3676
Tooling
Part Number
312
Smooth-bore Dies for Hydraulic and Thermoplastic Hoses Part Number
Finished Crimp Diameter mm (inch)
-8
241-9133
12.00 - 13.99 (0.472 -0.551)
214-2155
-10
241-9134
14.00 - 15.99 (0.551 - 0.630)
4C-3677
-12
241-9135
16.00 - 17.99 (0.630 - 0.708)
189-0990
-14
241-9136
18.00 - 19.99 (0.709 - 0.787)
241-9137
20.00 - 21.99 (0.787 - 0.866)
241-9138
22.00 - 23.99 (0.866 - 0.944)
241-9139
24.00 - 25.99 (0.945 - 1.023)
241-9140
26.00 - 27.99 (1.024 - 1.102)
241-9141
28.00 - 29.99 (1.102 - 1.181)
241-9142
30.00 - 32.99 (1.181 - 1.299)
241-9143
33.00 - 36.99 (1.299 - 1.456
241-9144
37.00 - 39.99 (1.457 - 1.574)
241-9145
40.00 - 42.99 (1.575 - 1.693)
241-9146
43.00 - 47.99 (1.693 - 1.889)
220-8686
48.00 - 49.99 (1.890 - 1.968)
241-9147
50.00 - 52.99 (1.969 - 2.074)
Stepped Die Machines 145-5161 Floor Model Hose Assembly Machine • Primary crimping machine • Not for reusable couplings • Crimps all permanent couplings through 2.00 in (50.8 mm) (-32) • Crimputer required
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6
n
n
-14
-16
-20
-24
-32
n
n n
n
a
XT-3™ ES
n
n
n
n
n
a
a
a
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
716
n
294
n
n
844 1028 2760
n
n
n
n
n
n
n
n
n
n
n
1543
Tooling
XT-5™ ES
n
n
n
n
nIndicates hose machine will crimp these coupling sizes. aFor competitive mobile equipment applications.
What to Order: Step 1 - Order the machine part number. Step 2 - Choose the power supply that you need from those shown on the following page. Step 3 - Choose the appropriate tooling that you need to crimp permanent couplings as shown on the following page.
313
Stepped Die Machines 145-5161 Floor Model Hose Assembly Machine Selection Step 2 - Choose the power supply you need. (Shipped with oil) • 147-4438 220V, 50 Hz
1 Phase
Minimum 15 Amp circuit required
• 147-4437 110/220V, 60 Hz
1 Phase
Minimum 25/15 Amp circuit required
NOTE: Service with 10W Hydraulic Oil (HYDO)
Step 3 - Purchase the related tooling required for crimping permanent couplings. Step 3a: Order the two part numbers below for the Crimputer. 146-5861
Crimputer Group (includes calibration plate)
1U-9484
Programming Cable
Tooling
Step 3b: Order all the following part numbers. 131-3035
Die Bowl
133-9845
Die Bowl
134-1256
Extractor Plate
133-9888
Extractor Plate
134-1257
Extractor Tube
133-9847
Extractor Tube
136-7955
Tee (2 required)
145-7838
Pusher (Separator for 1028 / 1543 hose)
145-7836
Spacer (2 required) - for 1028 / 1543 hose
7S-1126
Skiving group (if not already purchased)
226-7150
Cutting & Skiving accessory kit (if not already purchased)
Step 3c: Choose the die groups you need from the selection below. Dash#
Type XT-6™ ES
XT-6
XT-5™ ES XT-3™ ES
1956
716
294
844
-3
2760
1543
4C-3668
-4
130-2185 130-2185
4C-3669 144-4379
-5
130-2186
4C-3671 144-4380
-6
191-0800
130-5388
130-5381
129-9183 130-2187 130-2187
4C-3672 144-4381 4C-3675
-8
191-0801
130-5389
130-5382
129-9184 130-2188 130-2188
4C-3673 144-4382 4C-3676
-10
191-0802
130-5383
129-9185 130-2189 130-2189
214-5155
-12
191-0803
130-5384
129-9186 130-2190 130-2190 130-2190 4C-3674
4C-3677
130-5390
130-5386
189-0990
-14 -16 -20 -24 -26
314
1028
191-0804
130-5387
130-5385
129-9187 130-2191 130-2191 130-2191
220-8687
220-8686
129-9188 130-2192 130-2192 130-2192
220-8687
130-2561 130-2194 130-2194 130-2194
220-8688
130-2562 130-2195 130-2195 130-2195
Stepped Die Machines 139-5439 / 145-3381 Combination Hose Assembly Machines • Excellent machine for expanding production capability if a third machine is needed • Assembles/disassembles all sizes of XT™ hose reusable couplings • Crimps all permanent couplings through 1.25 in (3.8 mm) (-20) • Crimps 1.50 in (38.1 mm) (-24), 2.00 in (50.8 mm) (-32) low- and medium-pressure couplings with crimputer and additional parts • Two versions available: 139-5439 for shop and 145-3381 for service vehicles • Crimputer option highly recommended
NOTE: An additional arrangement is available for mobile hose service vehicles. The 145-3381 machine weighs 855 lbs. (388 kilos) and is suitable for most vehicles. If the vehicular option is chosen, a 149-2941 hydraulically driven power supply is available and must be used with 145-3381.
With Crimputer Hose Type
Dash Size -3
-4
-5
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6
n
n
-14
-16
-20
-24
-32
Tooling
-6
n
XT-5™ ES
n
n
XT-3™ ES
n
n
n
n
n
a
1956
n
n
n
n
n
n
n
n
n
n
n
n
r
r
n
n
n
n
n
n
r
r
n
n
n
r
r
716
n
294
n
n
844 1028 2760 1543
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n Indicates hose machine will crimp these coupling sizes. r Indicates hose machine can crimp if the machine is set up with additional -24 or -32 tooling. aFor competitive mobile equipment applications.
What to Order: Step 1 - Determine whether you need a shop of service vehicle version, and order the appropriate machine part number. Step 2 - Select and order the power supply that you need from the following page Step 3 - Choose the appropriate tooling that you need to crimp on permanent couplings as shown on the following pages. Step 4 - Order the Crimputer, bracket, and programming cable for the hose assembly machine.
315
Stepped Die Machines 139-5439 / 145-3381 Combination Hose Assembly Machines Step 2 Choose the power supply you need. (shipped without oil) • 149-7359 115V, 60 Hz
1 Phase
Minimum 25 Amp circuit required
• 146-2460 220V, 50/60 Hz
1 Phase
Minimum 20 Amp circuit required
• 146-2461 230/460V, 60 Hz
3 Phase
Draws 10/5 Amps
• 140-6241 220/380/440V, 50 Hz
3 Phase
Draws 10/7/5 Amps
• 149-2941 Hydraulic driven from vehicle – only for use with 145-3381. NOTE: Service with 10W Hydraulic Oil (HYDO)
Step 3 Choose the required related tooling.
Tooling
Step 3a: Tooling required for assembling XT™ hose reusable couplings: 215-9673
Accessory Group
*197-5391
Stem Expander, 3/4 inch, XT-6 ES
171-2528
XT-5™ ES and XT-6™ Hose Tool Group
*197-5392
Stem Pusher, 3/4 inch, XT-6 ES
4C-9902
XT-3™ ES Hose Tool Group
*197-5393
Pusher Assembly, 3/4 inch (used with existing 6V-4961 Mandrel), XT-6 ES
226-7150
Cutting and Skiving Accessory Kit
*197-5394
Stem Pusher, 1 inch, XT-6 ES
188-2157
XT-6 ES 1.5 in (38.1 mm) Acc Group *197-5395
Pusher Assembly, 1 inch (used with existing 6V-4963 Mandrel), XT-6 ES
265-5818
XT-6 ES 2.0 in (50.8 mm) Acc Group *197-5396
Stem Expander, 1 inch, XT-6 ES
*Additional individual tooling required to assemble XT-6 ES -12 and -16 size couplings NOTE: Refer to Reusable Coupling Tooling Groups for a complete list of part numbers included in each group.
Step 3b: Tooling required for crimping permanent couplings. Order the tools in the following list for use with the 146-5961 Crimputer Group: 139-5442
Die Bowl
134-1257
Extractor Tube
141-4868
Pusher Assembly
153-9129
Extractor Tube
167-1263
Extractor Assembly
160-2521
Separator for 1028/1543
Step 3c: To crimp 38.1 mm (1.50 in) (-24) and 50.8 mm (2.00 in) (-32) 716, 294, and 844 couplings, order the following parts: 133-9845
Die Bowl
146-5860
Extractor Tube
140-6238
Pusher Assembly
6V-3538
Dowel (2 required)
147-2641
Potentiometer
147-2407
Plate
146-5858
Extractor Assembly
316
Stepped Die Machines 139-5439 / 145-3381 Combination Hose Assembly Machines Step 3 Continued Step 3c: Choose the die groups you need from the selection below if you are ordering a 146-5861 Crimputer group. Dash#
Type XT-6™ ES
XT-6
XT-5™ ES XT-3™ ES 1956
716
294
844
-3
1028
2760
1543
4C-3668
-4
130-2185 130-2185
4C-3669 144-4379
-5
130-2186
4C-3671 144-4380
-6
191-0800
130-5388
130-5381
129-9183 130-2187 130-2187
4C-3672 144-4381
4C-3675
-8
191-0801
130-5389
130-5382
129-9184 130-2188 130-2188
4C-3673 144-4382
4C-3676
-10
191-0802
130-5383
129-9185 130-2189 130-2189
214-5155
-12
191-0803
130-5384
129-9186 130-2190 130-2190 130-2190 4C-3674
4C-3677
130-5390
130-5386
189-0990
-14 -16
191-0804
130-5387
-20
130-5385
129-9187 130-2191 130-2191 130-2191
220-8686
129-9188 130-2192 130-2192 130-2192
-24 -26
130-2194 130-2194 130-2194 130-2195 130-2195 130-2195 Tooling
NOTE: This table shows the die groups for the hose types and sizes that can be c A complete listing of Caterpillar die groups is shown in the Die Groups Section.
Step 4 Order the three parts shown in the following chart to equip the hose assembly machine with the Crimputer: 146-5861
Crimputer Group (includes calibration plate)
145-7327
Bracket Assembly
1U-9484
Programming Cable
317
Stepped Die Machines 150-3622 Bench Model Hose Assembly Machine • Inexpensive way to develop crimping capabilities for selected sizes • Crimps all Caterpillar permanent couplings currently available through 1.25 in (31.8 mm) (-20) • Uses same spacer rings as XT™ Hose Assembly Machines • “CE”* marked hydraulic power supply available * The “CE” mark indicates compliance with applicable directives of the European Committee for Standards.
Hose Type
Dash Size -3
-4
-5
-6
-8
-10
-12
XT-6™ ES
n
n
n
n
XT-6
n
n
-16
-20
n
n
n
n
n
n
n
1956
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
294
n
n
844 1028 2760 1543
n
n
n
n
n
n
n
n
n
n
n
-32
n
XT-3™ ES
716
-24
n
XT-5™ ES
Tooling
-14
n
n
n
n
n Indicates hose machine will crimp these coupling sizes.
What to Order: Step 1 - Order the machine part number. Step 2 - Select the power supply that you need and the hose assembly necessary to connect the power supply to the machine, as shown on the following page. Step 3 - Choose the appropriate tooling that you need to crimp on permanent couplings, as shown on the following pages.
318
Stepped Die Machines 150-3622 Bench Model Hose Assembly Machine Selection Step 2 Choose the power supply that you need (shipped with oil). • 161-5717 115V, 60 Hz
1 Phase
1 Phase (CE)*
• 163-5309 230V, 50 Hz
Minimum 15 Amp circuit required Minimum 15 Amp circuit required
Step 3 Order the required related tooling. Hose Assembly (1 Required)
134-9572
Spacer Rings
134-9573
Spacer Rings
134-9574
Spacer Rings
134-9575
Spacer Rings
134-9576
Spacer Rings
134-9577
Spacer Rings
134-9578
Spacer Rings
134-9580
Spacer Rings
134-2788
Spacer Rings
160-2275
Separator
157-6125
Stand (optional)
Tooling
162-1410
Step 3a: Choose the die groups you need from the selection below: Dash#
Type XT-6™ ES
XT-6
XT-5™ ES XT-3™ ES 1956
716
294
844
-3
1028
2760
1543
4C-3668
-4
130-2185 130-2185
4C-3669 144-4379
-5
130-2186
4C-3671 144-4380
-6
191-0800
130-5388
130-5381
129-9183 130-2187 130-2187
4C-3672 144-4381
4C-3675
-8
191-0801
130-5389
130-5382
129-9184 130-2188 130-2188
4C-3673 144-4382
4C-3676
-10
191-0802
130-5383
129-9185 130-2189 130-2189
214-5155
-12
191-0803
130-5384
129-9186 130-2190 130-2190 130-2190 4C-3674
4C-3677
130-5390
130-5386
189-0990
-14 -16 -20
191-0804
130-5387
130-5385
129-9187 130-2191 130-2191 130-2191
220-0346
129-9188 130-2192 130-2192 130-2192
NOTE: This table shows the die groups for the hose types and sizes that can be crimped using the Hose Assembly Machine 150-3622. A complete listing of Caterpillar die groups is shown in the Die Groups Section. * The “CE” mark indicates compliance with applicable directives of the European Committee for Standards.
319
Stepped Die Machines 215-9672 Field Service Hose Assembly Machine Selection • Replaces 171-2530 • For XT-3™ ES hose and reusable couplings through 1.25 in (31.8 mm) (-20) • Not for XT-5™ ES, XT-6™ or XT-6 ES hose and couplings • Not for permanent couplings • Replacement parts sold separately Power Supply • 1U-5230 Hydraulic Hand Pump (sold separately)
Item
Tooling
1.
Quan. 1
Part No.
Description
—
Press Frame
Not Shown 1U-7541
30 Ton Hydraulic Ram
2.
2
5P-0968
Collet, Stem, 1-1/4 in
1U-7860
Chain Wrench
2
2
5P-0967
Collet, Stem, 1 in
1U-9124
Protractor
2
2
5P-0966
Collet, Stem, 3/4 in
4C-4379
Support Plate
2
2
5P-0965
Collet, Stem, 3/8 in and 1/2 in
7S-1126
Skiving Group
2
2
6V-9071
Collet, Stem, 3/8 in - not shown
3.
2
5P-0268
Collet, Hose, 3/8 in
3
2
5P-0269
Collet, Hose, 1/2 in
3
2
5P-0271
Collet, Hose, 3/4 in
3
2
5P-0272
Collet, Hose, 1 in
3
2
5P-0273
Collet, Hose, 1-1/4 in
4.
1
170-5688
Stem Expander As., 3/8 in
4
1
170-5687
Stem Expander As., 1/2 in
4
1
170-5689
Stem Expander As., 1 in
4
1
170-5690
Stem Expander As., 3/4 in
4
1
5P-5234
Stem Expander As., 1-1/4 in
5.
1
5S-2805
Finger Expander, 3/8 in
5
1
5S-2811
Finger Expander, 1/2 in
5
1
5S-2823
Finger Expander, 3/4 in
5
1
5P-0973
Finger Expander, 1 in
5
1
5S-2837
Finger Expander, 1-1/4 in
6.
2
5P-0278
Collet, Sleeve, 1-1/4 in (2 required)
6
2
5P-0279
Collet, Sleeve, 1 in
6
2
5P-0280
Collet, Sleeve, 3/4 in
6
2
5P-0281
Collet, Sleeve, 1/2 in
6
2
5P-0282
Collet, Sleeve, 3/8 in
7
1
5S-2808
Pusher, Stem, 3/8 in
7
1
5S-2814
Pusher, Stem, 1/2 in
7
1
5S-2826
Pusher, Stem, 3/4 in
7
1
5S-2834
Pusher, Stem, 1 in
7
1
5S-2840
Pusher, Stem, 1-1/4 in
8
1
5P-0283
Rear Abutment through hose
8
1
5P-0284
Rear Abutment
320
Reusable Coupling Tooling Groups This section provides the serviceable reusable coupling tooling group consist information. This information can be used to order individual parts or to determine if your tooling is current.
215-9673 Accessory Group • Replaces 171-2531 Accessory Group
2
1 7 6
3
5
4
• Used with 150-2568, 4C-9900, 6V-4880, 1U-9160, and 173-9805 XT™ Hose Assembly Machine and with 139-5439, 145-3381, 152-3910 Combination Hose Assembly Machine • Replaces 4C-9901 Accessory Group* • Replaces 138-4610 Accessory Group • May be ordered as individual parts
8
10
9
11
* To upgrade from the old 4C-9901 group to the new 139-5439 group, order the Mandrel 136-3603 and the Pusher Assembly 136-3604.
Part No.
Description
Item
Part No.
Description
1.
7S-1125
Protractor Group
9
6V-4961
Mandrel, 3/4 in
2.
7S-1126
Skiving Group (replaces 1U-9159)
9
6V-4962
Pusher As., 3/4 in
3.
4C-6187
Colle
9
6V-4963
Mandrel, 1 in
3
4C-6188
Collet
9
6V-4964
Pusher As., 1 in
3
8T-3158
Collet
9
8T-3058
Mandrel, 1-1/4 in
4.
4C-5887
Collet, 3/8 in
9
8T-3059
Pusher As., 1-1/4 in
4
4C-5888
Collet, 1/2 in
9
8T-3060
Mandrel, 1-1/2 in
4
4C-5889
Collet, 3/4 in
9
8T-3061
Pusher As., 1-1/2 in
4
4C-5890
Collet, 1 in
9
136-3603
Mandrel, 2 in
4
4C-5891
Collet, 1-1/4 in
9
136-3604
Pusher As., 2 in
4
4C-5892
Collet, 1-1/2 in
10.
170-5688
Stem Expander As., 3/8 in
4
4C-5893
Collet, 2 in
10
170-5690
Stem Expander As., 3/4 in
5.
1U-9673
Collet, top, 3/8 in, 1/2 in
10
170-5687
Stem Expander As., 1/2 in
5
1U-9674
Collet, bottom, 3/8 in, 1/2 in
10
170-5689
Stem Expander As., 1 in
5
131-4367
Collet, top, 3/4 in
10
5P-5234
Stem Expander As., 1-1/4 in
5
131-4368
Collet, bottom, 3/4 in
10
5P-5235
Stem Expander As., 1-1/2 in
5
1U-9675
Collet, top, 1 in, 1-1/4 in
10
5P-5236
Stem Expander As., 2 in
5
1U-9676
Collet, bottom, 1 in, 1-1/4 in
11.
5S-2808
Pusher, Stem, 3/8 in
5
1U-9677
Collet, top, 1-1/2 in
11
5S-2814
Pusher, Stem, 1/2 in
5
1U-9678
Collet, bottom, 1-1/2 in
11
5S-2826
Pusher, Stem, 3/4 in
5
1U-9679
Collet, top, 2 in
11
5S-2834
Pusher, Stem, 1 in
5
1U-9680
Collet, bottom, 2 in
11
5S-2840
Pusher, Stem, 1-1/4 in
6.
6V-4913
Plate, Pusher Slotted
11
5S-2846
Pusher, Stem, 1-1/2 in
7.
6V-4912
Plate, Pusher
11
5S-2852
Pusher, Stem, 2 in
8.
5S-2805
Finger Expander, 3/8 in
8
5S-2811
Finger Expander, 1/2 in
8
5S-2823
Finger Expander, 3/4 in
8
5P-0973
Finger Expander, 1 in
8
5S-2837
Finger Expander, 1-1/4 in
8
5S-2843
Finger Expander, 1-1/2 in
8
5S-2849
Finger Expander, 2 in
Tooling
Item
321
Reusable Coupling Tooling Groups 131-3961 XT™ Hose Reclamation Tooling
Tooling
• The Tool Group 131-3961 is used to remove XT hose reusable couplings from XT hose assemblies • Setscrews grip hose for easy removal • Available for 0.75 in (19.1 mm) (-12) through 2.00 in (50.8 mm) (-32) hose • Can be ordered as a group or separate parts Separate parts available for Tool Group 131-3961 are: 8C-3996
Setscrew-socket (3 required per collet set)
127-9924
Collet, Top (0.75 in)
127-9926
Collet, Bottom
127-9928
Collet, Top (1.00 in)
127-9929
Collet, Bottom
127-9930
Collet, Top (1.25 in)
127-9931
Collet, Bottom
127-9933
Collet, Top (1.50 in)
127-9934
Collet, Bottom
127-9936
Collet, Top (2.00 in)
127-9937
Collet, Bottom
4C-9902 XT-3 ES™ Hose Tool Group • Used with XT Hose Assembly Machine 150-2568 and Combination Hose Assembly Machine 139-5439 • May be ordered as individual parts
Item
Part No.
Description
1.
6V-4886 6V-4887
Collet, top, 3/8 in XT-3 ES Sleeve; 3/4 in XT-3 ES Stem Collet, bottom, 3/8 in XT-3 ES Sleeve; 3/4 in XT-3 ES Stem
2.
9U-6743 9U-6744
Collet, top, 1/2 in XT-3 ES Sleeve; 1 in XT-3 ES Stem Collet, bottom, 1/2 in XT-3 ES Sleeve; 1 in XT-3 ES Stem
3.
6V-4893 6V-4894
Collet, top, 1 in XT-3 ES Sleeve; 1-1/2 in XT-3 ES Stem; 3/4 in XT-6 Sleeve Collet, bottom, 1 in XT-3 ES Sleeve; 1-1/2 in XT-3 ES Stem; 3/4 in XT-6 Sleeve
4.
6V-4891 6V-4892
Collet, top, 3/4 in XT-3 ES Sleeve; 1-1/4 in XT-3 ES Stem; 1 in XT-6 Stem Collet, bottom, 3/4 in XT-3 ES Sleeve; 1-1/4 in XT-3 ES Stem; 1 in XT-6 Stem
5.
6V-4899 6V-4901
Collet, top, 2 in XT-3 ES Sleeve Collet, bottom, 2 in XT-3 ES Sleeve
6.
6V-4897 6V-4898
Collet, top, 1-1/2 in XT-3 ES Sleeve Collet, bottom, 1-1/2 in XT-3 ES Sleeve
7.
6V-4902 6V-4903
Collet, top, 3/8 in XT-3 ES Stem; 1/2 in XT-3 ES Stem; 3/8 in XT-6 Stem; 1/2 in XT-6 Stem Collet, bottom, 3/8 in XT-3 ES Stem; 1/2 in XT-3 ES Stem; 3/8 in XT-6 Stem; 1/2 in XT-6 Stem
8.
6V-9069 6V-9070
Collet, top, 1-1/4 in XT-3 ES Sleeve; 2 in XT-3 ES Stem Collet, bottom, 1-1/4 in XT-3 ES Sleeve; 2 in XT-3 ES Stem
322
Reusable Coupling Tooling Groups 171-2528 XT-6™ and XT-5 ES™ Hose Tool Group • Used with XT Hose Assembly Machine 150-2568, 4C-9900, 6V-4880, 1U-9160 and 173-9805 and Combination Hose Assembly Machine 139-5439, 145-3381, 152-3910
2
1
• Replaces canceled Tool Group 4C-9903 • Tool Group 4C-9480 contains additional parts not in original 4C-9903 group. • To save money when upgrading from 4C-9903 to 4C-9480 group, utilize existing collets and purchase only 4C-9422, 4C-9423, 4C-9433, 4C-7474, 6V-4926, 6V-4927, 122-7321, 122-7322, and 126-1023.
• May be ordered as individual parts • New collets are designed to better fit XT-5 ES and XT-6 hoses • Collets are heat-treated for increased life and durability
Part No.
Description
1.
6V-4972
Expander Assembly, XT-5 ES -32 Stem
1
170-5684
Expander Assembly, XT-6 -16 Stem
1
170-5683
Expander Assembly, XT-6 -12 Stem
2.
4C-9422
Collet, Top, 1-1/4 in XT-6 Stem
2
4C-9423
Collet, Bottom, 1-1/4 in XT-6 Stem
2
4C-9433
Collet, Top, 1-1/4 in XT-5 ES and XT-6 Sleeve
2
4C-9474
Collet, Bottom, 1-1/4 in XT-5 ES and XT-6 Sleeve
2
6V-4915
Collet, Top, 3/4 in XT-5 ES Stem
2
6V-4916
Collet, Bottom, 3/4 in XT-5 ES Stem
2
6V-4917
Collet, Top, 3/4 in XT-6 Stem and 1 in XT-5 ES Stem
2
6V-4918
Collet, Bottom, 3/4 in XT-6 Stem and 1 in XT-5 ES Stem
2
6V-4919
Collet, Top, 3/4 in XT-5 ES Sleeve
2
6V-4921
Collet, Bottom, 3/4 in XT-5 ES Sleeve
2
6V-4922
Collet, Top, 1 in XT-6 Sleeve
2
6V-4923
Collet, Bottom, 1 in XT-6 Sleeve
2
6V-4924
Collet, Top, 1-1/2 in XT-5 ES Sleeve; 2 in XT-5 ES Stem
2
6V-4925
Collet, Bottom, 1-1/2 in XT-5 ES Sleeve; 2 in XT-5 ES Stem
2
6V-4926
Collet, Top, 2 in XT-5 ES Sleeve
2
6V-4927
Collet, Bottom, 2 in XT-5 ES Sleeve
2
8T-0815
Collet, Top, 1 in XT-5 ES Sleeve and 1-1/2 in XT-5 ES Stem
2
8T-0816
Collet, Bottom, 1 in XT-5 ES Sleeve and 1-1/2 in XT-5 ES Stem
2
122-7321
Collet, Top, 1-1/4 in XT-5 ES Stem
2
122-7322
Collet, Bottom, 1-1/4 in XT-5 ES Stem
3.
126-1023
Pusher, Stem, 2 in XT-5 ES
Tooling
Item
323
Reusable Coupling Tooling Groups XT-6™ ES Accessory Tools Typical Collet and Expander Designs
ToolList-02
ToolList-01
Typical Stem Collet
ToolList-05
Finger Expander
Stem Expander
Typical Sleeve Collet
ToolList-12
188-2157 XT-6 ES Accessory Group (1.50 in) Check Box
Part Number
Description
188-1590
Collet Top
188-1591
Collet Bottom
188-1592
Collet Top
188-1593
Collet Bottom
Used On
Tooling
Collets -24 XT-6 ES Sleeve
-24 XT-6 ES Stem
Stem Expander 188-1594
Stem Expander
-24 XT-6 ES
Finger Expander
-24 XT-6 ES (reforms coupling fingers)
Finger Expander 1881595
324
Reusable Coupling Tooling Groups 265-5818 XT-6™ ES Accessory Tools and Group (2.00 in) Check Box
Part Number
Description
265-5809
Collet Top
265-5810
Collet Bottom
Used On
Collets -32 XT-6 ES Sleeve 265-5811
Collet Top
265-5812
Collet Bottom
265-5813
Pusher-Stem
-32 XT-6 ES (to provide additional stroke)
265-5815
Pusher- Stem
-32 XT-6 ES (to provide additional stroke)
265-5814
Plate-Pusher
-32 XT-6 ES ( to provide additional stroke)
265-5816
Expander-Stem
-32 XT-6 ES
265-5817
Expander As.
-32 XT-6 ES (reforms coupling fingers)
-32 XT-6 ES Stem
Pushers
Plate Expanders
Tooling
325
Reusable Coupling Tooling Groups 226-7150 Hose Gauge Kit – Reusable Coupling Check Box
Hose Size Identification Color
Part Number
Description
Used On
226-7141 226-7142
Yellow Blue
Skive Guide Skive Guide
-6 DIN -8 DIN
226-7143
Orange
Skive Guide
-10 DIN
226-7144 226-7145
Green Black
Skive Guide Skive Guide
-12 DIN -16 DIN
226-7146 226-7147 226-7148 226-7149 NEHS 0861
White Red Green
Skive Guide Skive Guide Skive Guide Depth Gauge Skive Length Chart
-20 DIN -24 DIN -32 DIN ToolList-17
Skive Guide
Tooling
Check Box
Check Box
Hose Size Part Identification Number Color 209-3320
Yellow
209-3322
Blue
209-3324
Orange
202-3277
Green
202-3278
Black
202-3279
White
202-3280
Red
202-3281
Green
Part Number
Setscrew Dimension
Description
0.762 ± 0.025 mm (.0300 ± .0001 in) 0.762 ± 0.025 mm (.0399 ± .0001 in) 1.016 ± 0.025 mm (.0400 ± .0001 in) 1.143 ± 0.025 mm (.0450 ± .0001 in) 1.524 ± 0.025 mm (.0600 ± .0001 in)
Arbor Group
2.032 ± 0.025 mm (.0800 ± .0001 in) 2.540 ± 0.025 mm (.1000 ± .0001 in) 3.175 ± 0.025 mm (.1250 ± .0001 in)
Arbor Group
Description
Arbor Group Arbor Group Arbor Group Arbor Group
Arbor Group Arbor Group
Used On -6 DIN, XT-3™ ES, XT-5™ ES, and XT-6™ -8 DIN, XT-3 ES, XT-5 ES, and XT-6 -10 DIN, XT-3 ES, XT-5 ES, and XT-6 -12 DIN, XT-3 ES, XT-5 ES, and XT-6 -16 DIN, XT-3 ES, XT-5 ES, and XT-6 -20 DIN, XT-3 ES, XT-5 ES, and XT-6 -24 DIN, XT-3 ES, XT-5 ES, and XT-6 -32 DIN, XT-3 ES, XT-5 ES, and XT-6
ToolList-16
Typical One-piece Squareness Gauge and Skiving Arbor
Remarks
202-8959
Hose Cut-off Support Group
Angle iron guide (mounts to saw to ensure square cut)
202-6602
Hose Marking Pen
Gel Pen (draws fine line for accurate marking of skive length)
ToolList-19
Hose Cutting Guide
326
Permanent Die Groups Permanent Coupling Die Groups XT-6™ ES HOSE (INSIDE DIAMETER)
1956 HOSE (INSIDE DIAMETER)
PART NO.
DASH SIZE
IN
MM
PART NO.
DASH SIZE
IN
191-0800
-6
.375
9.5
129-9183
-6
.375
9.5
191-0801
-8
.500
12.7
129-9184
-8
.500
12.7
191-0802
-10
.625
15.9
129-9185
-10
.625
15.9
191-0803
-12
.750
19.1
129-9186
-12
.750
19.1
191-0804
-16
25.4
129-9187
-16
1.000
25.4
129-9188
-20
1.250
31.8
130-2561
-24
1.500
38.1
130-2562
-32
2.000
50.8
1.00
XT-6 HOSE (INSIDE DIAMETER) PART NO.
DASH SIZE
IN
MM
130-5388
-6
.375
9.5
130-5389
-8
.500
12.7
130-5390
-12
.750
19.1
XT-5™ ES HOSE (INSIDE DIAMETER) PART NO.
DASH SIZE
MM
716, 294, 844 HOSE (INSIDE DIAMETER) PART NO.
DASH SIZE
IN
MM
130-2185
-4
.250
6.4
130-2186
-5
.312
7.9
IN
MM
130-2187
-6
.375
9.5
-12
.750
19.1
130-2188
-8
.500
12.7
130-5387
-16
1.000
25.4
130-2189
-10
.625
15.9
220-8687*
-20
1.250
31.8
130-2190
-12
.750
19.1
233-0349**
-20
1.250
31.8
130-2191
-16
1.000
25.4
130-2192
-20
1.250
31.8
130-2194
-24
1.500
38.1
130-2195
-32
2.000
50.8
*For use with 145-5161 Floor Model machine ** For use with Non-Current Floor Model machines 4C-3660, 4C-5052, 4C-5053, 9U-5792, and 9U-7261. 233-0350 split pusher required.
Tooling
130-5386
1028 HOSE (INSIDE DIAMETER) XT-3™ ES HOSE (INSIDE DIAMETER)
PART NO.
PART NO.
DASH SIZE
IN
MM
130-5381
-6
.375
9.5
130-5382
-8
.500
12.7
130-5383
-10
.625
15.9
130-5384
-12
.750
19.1
130-5385
-16
1.000
25.4
220-8686*
-20
1.250
31.8
233-0346**
-20
1.250
31.8
220-8687***
-24
1.500
38.1
233-0347³
-24
1.500
38.1
220-8688***
-32
2.000
50.8
233-0348³
-32
2.000
50.8
*For use with 145-5161 Floor Model machine & Combination Machines 145-3381, 139-5439, and 152-3910. **For use with Bench Model 156-3622 & NonCurrent Floor Model machines 4C-3660, 139-5439, and 152-3910. ***For use with 145-5161 Floor Model machine. ³For use with Non-Current Floor Model machines 4C-3660, 4C-5052, 4C-5053, 9U-5792, and 9U-7261. 233-0350 split pusher required.
DASH SIZE
IN
MM
4C-3668
-3
.188
4.8
4C-3669
-4
.250
6.4
4C-3671
-5
.312
7.9
4C-3672
-6
.375
9.5
4C-3673
-8
.500
12.7
4C-3674
-12
.750
19.1
2760 HOSE (INSIDE DIAMETER) PART NO.
DASH SIZE
IN
MM
144-4379
-4
.250
6.4
144-4380
-5
.312
7.9
144-4381
-6
.375
9.5
144-4382
-8
.500
12.7
1543 HOSE (INSIDE DIAMETER) PART NO.
DASH SIZE
IN
4C-3675
-6
.312
MM 7.9
4C-3676
-8
.406
10.3
214-5155
-10
.500
12.7
4C-3677
-12
.625
15.9
189-0990
-14
.750
19.1
327
Hose Cutting Machines and Fume Exhauster Attachments 6V-6015 / 250-6807 Hose Cutting Machines • Designed to cut hose safely and efficiently • Rated at 7.5 Horsepower • Available for different electrical requirements
To order select the part number below that meets your electrical requirements. Note: These machines are not European Union compliant 3 Phase
Tooling
• 6V-6015
230V, 60 Hz
3 Phase
Minimum 20 Amp circuit required
• 250-6807 460V, 60 Hz Single Phase*
3 Phase
Minimum 10 Amp circuit required
• 9U-7319
230V, 50 Hz
1 Phase
Minimum 35 Amp circuit required
• 9U-7320
230V, 60 Hz
1 Phase
Minimum 35 Amp circuit required
Replacement Parts for Hose Cutting Machines 4C-9621
Belt Set
174-8912
Cut-of f Wheel
* If a single-phase saw is required, a single-phase fume exhauster will be required. This is available as a special order. Contact your Dealer Service Tools representative.
328
Hose Cutting Machines and Fume Exhauster Attachments 251-1207 / 250-6808 Fume Exhausters • Optional Accessory • Exhausts fumes and draws dust and debris into cabinet base where it is trapped for later collection • 251-1207 Fume Exhauster is installed and wired to 6V-6015 Hose Cutting Machine • Wired for 230V, 60 Hz, 3 Phase. • 900 CFM capacity • 250-6808 Fume Exhauster is installed and wired to 250-6807 Hose Cutting Machine • Wired for 460V, 60 Hz, 3 Phase. • 900 CFM capacity • Ducting not included. For best results, use 5.00 in (127 mm) diameter ducting with a maximum length of 20 ft (6 m) • Single phase fume exhauster for use with 9U-7319 and 9U-7320 is available as a special order. Contact your Dealer Service Tools sales representative. • Not for use with cut off saws 9U-7319 & 9U-7320
Tooling
329
Hose Cutting Machines and Fume Exhauster Attachments 223-2105 Hose Cut-Off Saw • Used to cut all Caterpillar hydraulic hoses, except 1543 air conditioning hose and 1028 thermoplastic hose • Cuts six-spiral hose up to 2 in (50.8 mm) diameter • Adjustable pins allow saw to cut various sizes of hose • Uses a hand lever to push hose into cutting blade • Lubricant is released at cutting edge and only during cutting process to reduce friction and extend serviceable life of cutting blade • Designed to be bolted to work table or stand • European Union compliant Voltage Weight Minimum air pressure requirement Service Parts Part No. 223-2106 228-7902 Tooling
Reference NEHS0860 Using the 223-2105 Hose Cutting Machine (English) NFHS0860 Using the 223-2105 Hose Cutting Machine (French) NGHS0860 Using the 223-2105 Hose Cutting Machine (German) NPHS0860 Using the 223-2105 Hose Cutting Machine (Portuguese) NSHS0860 Using the 223-2105 Hose Cutting Machine (Spanish)
330
400 VAC 3-Phase 152 lbs (69 kg) 5 PSI (34 kPa) Description Blade Lubricant
Hose Cleaning Groups 233-7193 Hose Cleaner Group • 233-7193 Hose Cleaner Group provides a fast and effective way to clean hose, complete hose assemblies, or other hydraulic lines in order to reduce hydraulic system contamination. • Designed specifically for the dealer hose assembly area • Includes a stand for the projectile launcher (gun) and a nozzle rack • Fewer nozzles to simplify nozzle and projectile selection • Does not include the carrying case • 233-7190 Gun can be purchased separately.
To equip your hose assembly area with a 233-7193 Hose Cleaner Group and related parts, follow the two steps below:
Step 1 - Order the 233-7193 Hose Cleaner Group. The hose cleaner group includes all of the parts listed below. Description
Part No.
Description
130-6062
Ring-Adapter
130-6073
Nozzle (16 mm)
130-6068
Coupling As.
130-6074
Nozzle (19 mm)
215-4585
Nozzle (4 mm)
130-6075
Nozzle (25 mm)
130-6069
Nozzle (6 mm)
130-6076
Nozzle (32 mm)
130-6070
Nozzle (8 mm)
130-6091
Nozzle (38 mm)
130-6071
Nozzle (10 mm)
130-6092
Nozzle (50 mm)
130-6072
Nozzle (13 mm)
130-6097
Nozzle (38 mm)
156-0055
Rack-Nozzle Organizer
156-0050
Stand-Launcher
233-7190
Gun Hose Cleaning
Tooling
Part No.
Step 2 - Order the projectiles for cleaning hose and hose assemblies from the list that is located after the hose cleaner groups on the page entitled, “Projectile Application Information for Hose Cleaner Groups.”
331
Hose Cleaning Groups 233-7192 Hose Cleaner Group • 233-7192 Hose Cleaner Group quickly and effectively clean hose, complete hose assemblies, or other hydraulic lines in order to reduce hydraulic system contamination. • Designed specifically for service vehicle or mobile applications • Includes a large carrying case with foam insert • Fewer nozzles to simplify nozzle and projectile selection Equip your hose assembly area with a 233-7192 Hose Cleaner Group and related parts, follow the two steps below:
Step 1 - Order the 233-7192 Hose Cleaner Group.
Tooling
The hose cleaner group includes all of the parts listed below. Part No.
Description
Part No.
Description
130-6062
Ring-Adapter
130-6076
Nozzle (32 mm)
130-6068
Coupling As.
130-6083
Nozzle (6 mm)
215-4585
Nozzle (4 mm)
130-6084
Nozzle (8 mm)
130-6069
Nozzle (6 mm)
130-6085
Nozzle (10 mm)
130-6070
Nozzle (8 mm)
130-6086
Nozzle (13 mm)
130-6071
Nozzle (10 mm)
130-6087
Nozzle (16 mm)
130-6072
Nozzle (13 mm)
130-6088
Nozzle (19 mm)
130-6073
Nozzle (16 mm)
130-6089
Nozzle (25/22 mm)
130-6074
Nozzle (19 mm)
130-6090
Nozzle (32/25 mm)
130-6075
Nozzle (25 mm)
233-7190
Gun Hose Cleaning
Step 2 - Order the projectiles for cleaning hose and hose assemblies from the list that is located after the hose cleaner groups on the page entitled, “Projectile Application Information for Hose Cleaner Groups.”
332
Hose Cleaning Groups 233-7191 Hose Cleaning Group (Economy) • Used to remove waste and contaminants from internal surfaces of tubes, lines and hoses while machine is at the job site (works great in field service trucks) • Used with pressurized air or nitrogen gas, existing Caterpillar projectiles, and NEEG2955 Projectile Sizing Chart • Works on 0.16 in (4 mm) through 1.25 in (32 mm) or -4 through -20 hoses • Less expensive alternative to other Caterpillar hose cleaning groups (this group has limited size capabilities, therefore - less expensive) • Durable plastic handle with quick-acting threads and internal brass parts • No need to remove tubes and/or hoses from machine; simply disconnect at both ends • Clean hydraulic systems (tubes, lines, and hoses will reduce risk of component failure, increase service life of filters, reduce eqquipment maintenance costs (less wear), and increase productivity (more time on the job) • Operating instructions and carrying case are included • Operating pressure: 589 to 965 kPa (85 to 140 psi) • An in-line air filter, lubricator, and regulator are recommended • 233-7189 Hose Cleaning Gun can also be purchased separately
Step 1 - Order the 233-7191 Hose Cleaner Group. Tooling
The hose cleaner group includes all of the parts listed below. Part No.
Description
215-4585
Nozzle, H04 (.16 in)
130-6069
Nozzle, H06 (.2 in)
130-6070
Nozzle, H08 (.3 in)
130-6071
Nozzle, H10 (.4 in)
130-6072
Nozzle, H13 (.5 in)
130-6073
Nozzle, H16 (.6 in)
130-6074
Nozzle, H19 (.7 in)
130-6075
Nozzle, H25 (1.0 in)
130-6076
Nozzle, H32 (1.3 in)
233-7189
Hose Cleaning Gun
130-6068
Air Hose Quick Disconnect (1/2 inch male hose barb)
Step 2 - Order the projectiles for cleaning hose and hose assemblies from the list that is located after the hose cleaner groups on the page entitled, “Projectile Application Information for Hose Cleaner Groups.”
333
Hose Cleaning Groups 265-4959 Hose Cleaner Group • Designed to remove waste and contaminants from large-bore hose and couplings • Cleans product with 2.5 inch (63.5 mm), 3.0 inch (76.2 mm), and 3.5 inch (88.9 mm) inside diameters • 265-4958 Launcher can be purchased separately.
Step 1 - Order the 233-7193 Hose Cleaner Group.
Tooling
The hose cleaner group includes all of the parts listed below. Part No.
Description
Part No.
Description
130-6062 130-6068
Ring-Adapter
130-6073
Nozzle (16 mm)
Coupling As.
130-6074
Nozzle (19 mm)
215-4585
Nozzle (4 mm)
130-6075
Nozzle (25 mm)
130-6069
Nozzle (6 mm)
130-6076
Nozzle (32 mm)
130-6070
Nozzle (8 mm)
130-6091
Nozzle (38 mm)
130-6071
Nozzle (10 mm)
130-6092
Nozzle (50 mm)
130-6072
Nozzle (13 mm)
130-6097
Nozzle (38 mm)
156-0055
Rack-Nozzle Organizer
156-0050
Stand-Launcher
233-7190
Gun Hose Cleaning
Step 2 - Order the projectiles for cleaning hose and hose assemblies from the list that begins on the following page on the page entitled, “Projectile Application Information for Hose Cleaner Groups.”
334
Hose Cleaning Groups Projectile Application Information for Hose Cleaner Groups Use the information provided to order the projectiles for cleaning hose and hose assemblies from the list below. Recommended projectiles are listed below along with package quantity information. Part No.
Pkg. Qty.
Part No.
Pkg. Qty.
215-4565
100
215-4575
50
215-4566
100
215-4576
40
215-4567
100
215-4577
40
215-4568
100
215-4578
30
215-4569
100
215-4579
30
215-4570
100
215-4580
20
215-4571
100
215-4581
20
215-4572
100
215-4582
15
215-4573
100
215-4583
15
215-4574
100
215-4584
15
NOTE: Refer to Hose Cleaning Projectile Sizing Chart – NEEG2955
Tooling
335
Hose Cleaning Groups Application Charts for Hose Cleaner Groups Hose Nozzles and Projectiles Hose Dash Size
Decimal
Cat Nozzle #
Mfg. Nozzle #
-4
0.250
130-6069
H06
UC12
215-4568
n
n
n
-5
0.312
130-6070
H08
UC14
215-4569
n
n
n
-6
0.375
130-6071
H10
UC16
215-4570
n
n
n
-8
0.500
130-6072
H13
UC20
215-4572
n
n
n
-10
0.625
130-6073
H16
UC24
215-4574
n
n
n
-12
0.750
130-6074
H19
UC26
215-4575
n
n
n
-16
1.000
130-6075
H25
UC36
215-4578
n
n
n
-20
1.250
130-6076
H32
UC45
215-4580
n
n
n
-24
1.500
130-6091
H38
UC55
215-4582
n
n
-32
2.000
130-6092
H50
UC65
215-4584
n
n
-40
2.500
267-1527
UC-U55/90
UC80
265-4953
n
-48
3.000
267-1527
UC-U55/90
UC90
265-4955
n
-56
3.500
265-1527
UC-U55/90
UC100
265-4957
n
Mfg. Cat Projectile # Projectile #
233-7193
Hose Cleaner/Projectile Usage 233-7192 233-7191
*265-4659
JIC / Pipe Couplings
Tooling
Coupling Dash Size Decimal
Cat Nozzle #
Mfg. Nozzle #
-4
0.250
130-6083
J06
-5
0.312
130-6084
J08/T06
-6
0.375
130-6085
J10
-8
0.500
130-6086
J13/T13
-10
0.625
130-6087
-12
0.750
-16
Mfg. Cat Projectile # Projectile # UC07
233-7193
Hose Cleaner/Projectile Usage 233-7192 233-7191
*265-4659
215-4566
n
n
n
UC10
215-4567
n
n
n
UC12
215-4568
n
n
n
UC16
215-4570
n
n
n
J16/T16
UC22
215-4573
n
n
n
130-6088
J19/T19
UC26
215-4575
n
n
n
1.000
130-6089
J25/T22
UC33
215-4577
n
n
n
-20
1.250
130-6090
J232/T25
UC40
215-4579
n
n
n
-24
1.500
130-6097
J38/T38
UC50
215-4581
n
n
-32
2.000
130-6098
J50/T50
UC60
215-4583
n
n
-40
2.500
267-1527
UC-U55/90
UC75
265-4952
n
-48
3.000
267-1527
UC-U55/90
UC85
265-4954
n
-56
3.500
267-1527
UC-U55/90
UC95
265-4956
n
O-Ring Face Seal (ORFS) Couplings Coupling Dash Size Decimal
Cat Nozzle #
Mfg. Nozzle #
Mfg. Cat Projectile # Projectile #
233-7193
-4
0.250
215-4585
4FFORX
UC10
215-4567
n
n
n
-6
0.375
130-6069
H06
UC12
215-4568
n
n
n
-8
0.500
130-6071
H10
UC16
215-4570
n
n
n
-10
0.625
130-6072
H13
UC22
215-4573
n
n
n
-12
0.750
130-6073
H16
UC26
215-4575
n
n
n
-16
1.000
130-6074
H19
UC33
215-4577
n
n
n
-20
1.250
130-6075
H25
UC40
215-4579
n
n
n
*265-4949 Hose Cleaner Group can clean all sizes if additional nozzles are purchased.
336
Hose Cleaner/Projectile Usage 233-7192 233-7191
*265-4659
Hose Cleaning Groups Application Charts for Hose Cleaner Groups Code 61, 62, & Cat Flange Couplings Coupling Dash Size Decimal
Cat Nozzle #
Mfg. Nozzle #
Mfg. Cat Projectile # Projectile #
233-7193
Hose Cleaner/Projectile Usage 233-7192 233-7191 *265-4949
-8
0.500
130-6069
H10
UC16
215-4570
n
n
n
-10
0.625
130-6072
H13
UC22
215-4573
n
n
n
-12
0.750
130-6073
H16
UC26
215-4575
n
n
n
-16
1.000
130-6074
H19
UC33
215-4577
n
n
n
-20
1.250
130-6075
H25
UC40
215-4579
n
n
n
-24
1.500
130-6076
H32
UC50
215-4581
n
n
-32
2.000
130-6091
H38
UC60
215-4583
n
n
-40
2.500
267-1527
UC-U55/90
UC75
265-4952
n
-48
3.000
267-1527
UC-U55/90
UC85
265-4954
n
-56
3.500
267-1527
UC-U55/90
UC95
265-4956
n
Hydraulic Tubing OD x WALL 1/4 in x 0.035 in
Cat Nozzle #
Mfg. Nozzle #
130-6084
Mfg. Projectile #
Cat Projectile #
Hose Cleaner/Projectile Usage 233-7193 233-7192 233-7191
UC07
215-4566
n
n
n
130-6094
T08
UC10
215-4567
n
n
n
3/8 in x 0.035 in
130-6095
T10
UC12
215-4568
n
n
n
3/8 in x 0.049 in
130-6095
T10
UC12
215-4568
n
n
n
1/2 in x 0.035 in
130-6086
J13/T13
UC16
215-4570
n
n
n
1/2 in x 0.049 in
130-6086
J13/T13
UC16
215-4570
n
n
n
1/2 in x 0.065 in
130-6086
J13/T13
UC14
215-4569
n
n
n
5/8 in x 0.049 in
130-6087
J16/T16
UC20
215-4572
n
n
n
5/8 in x 0.065 in
130-6087
J16/T16
UC18
215-4571
n
n
n
5/8 in x 0.083 in
130-6087
J16/T16
UC16
215-4570
n
n
n
3/4 in x 0.049 in
130-6088
J19/T19
UC24
215-4574
n
n
n
3/4 in x 0.065 in
130-6088
J19/T19
UC24
215-4574
n
n
n
3/4 in x 0.095 in
130-6088
J19/T19
UC22
215-4573
n
n
n
7/8 in x 0.049 in
130-6089
J25/T22
UC30
215-4576
n
n
n
7/8 in x 0.065 in
130-6089
J25/T22
UC30
215-4576
n
n
n n
7/8 in x 0.095 in
130-6073
H16
UC24
215-4574
n
n
1 in x 0.065 in
130-6090
J32/T25
UC30
215-4576
n
n
n
1 in x 0.095 in
130-6074
H19
UC30
215-4576
n
n
n
1 in x 0.120 in
130-6074
H19
UC30
215-4576
n
n
n
1-1/4 in x 0.065 in
130-6096
T32
UC40
215-4579
n
n
n
1-1/4 in x 0.095 in
130-6096
T32
UC36
215-4578
n
n
n
1-1/4 in x 0.120 in
130-6096
T32
UC36
215-4578
n
n
n
1-1/2 in x 0.065 in
130-6097
J38/T38
UC45
215-4580
n
n
1-1/2 in x 0.095 in
130-6097
J38/T38
UC45
215-4580
n
n
1-1/2 in x 0.120 in
130-6097
J38/T38
UC40
215-4579
n
n
2 in x 0.065 in
130-6098
J50/T50
UC60
215-4583
n
n
2 in x 0.095 in
130-6098
J50/T50
UC55
215-4582
n
n
2 in x 0.120 in
130-6098
J50/T50
UC55
215-4582
n
n
2 in x 0.134 in
130-6098
J50/T50
UC55
215-4582
n
n
Tooling
JO8/TO6
5/16 in x 0.035 in
*265-4949 Hose Cleaner Group can clean all sizes if additional nozzles are purchased.
337
Hose Cleaning Groups Application Charts for Hose Cleaner Groups Pipe SCH 40
Cat Nozzle #
Mfg. Nozzle #
Mfg. Cat Projectile # Projectile #
1/4 in
130-6071
H10
UC14
215-4569
n
n
n
3/8 in
130-6072
H13
UC18
215-4571
n
n
n
1/2 in
130-6073
H16
UC22
215-4573
n
n
n
233-7193
Hose Cleaner/Projectile Usage 2337192 2337191
3/4 in
130-6074
H19
UC30
215-4576
n
n
n
1 in
130-6075
H25
UC36
215-4578
n
n
n
1-1/4 in
130-6076
H32
UC40
215-4579
n
n
n
1-1/2 in
130-6091
H38
UC50
215-4581
n
n
n
2 in
130-6092
H50
UC60
215-4583
n
n
n
1/4 in
130-6069
H06
UC12
215-4568
n
n
n
3/8 in
130-6071
H10
UC16
215-4570
n
n
n
1/2 in
130-6072
H13
UC22
215-4573
n
n
n
*265-4959
Tooling
SCH 80
3/4 in
130-6073
H16
UC30
215-4576
n
n
n
1 in
130-6075
H25
UC36
215-4578
n
n
n
1-1/4 in
130-6076
H32
UC45
215-4580
n
n
n
1-1/2 in
130-6091
H38
UC50
215-4581
n
n
n
2 in
130-6091
H38
UC60
215-4583
n
n
n
1/2 in
130-6071
H10
UC16
215-4570
n
n
n
3/4 in
130-6073
H16
UC22
215-4573
n
n
n
1 in
130-6074
H19
UC30
215-4576
n
n
n
1-1/4 in
130-6075
H25
UC40
215-4579
n
n
n
1-1/2 in
130-6076
H32
UC45
215-4580
n
n
n
2 in
130-6091
H38
UC55
215-4582
n
n
2-1/2 in
130-6092
H50
UC65
215-4584
n
n
SCH 160
NOTE: The previous nozzle and projectile charts apply to all coupling styles. For couplings that jump down in size, use the nozzle that fits the head size. For couplings that jump up in size, use the nozzle that fits the hose size. *265-4949 Hose Cleaner Group can clean all sizes if additional nozzles are purchased.
338
Miscellaneous Tooling and Accessories 164-2691 Printer Group • For use with Crimputer Group 146-5861 • Prints original database and adjusted database • Prints crimp data to document date, hose type, hose size, and crimp information (0, 1, 2, or 3 copies) • Power supply is 110V, 60 Hz (supplied)
What to Order: Step 1 - Order the printer. Step 2 - Order extra service parts Step 3 - Contact Dealer Service Tools for Tool Operating Manual and software revision
164-2691
Printer Group
Includes
Printer (“CE”*)
164-2692
Ribbon (1) 110V, 60 Hz power supply Paper (1) Supplier manual Cable Assembly
Tooling
Step 1 Order the following part numbers:
Step 2 Available service parts: 164-2693
Ribbon
164-2695
Power Supply (110/230V, 60/50 Hz, “CE”*)
Note: Replacement paper rolls must be purchased locally: Paper Roll (3 in wide)
Step 3 Contact Caterpillar Dealer Service Tools Form NEHS0725 Tool Operating Manual Crimputer Software Revision 1.10A or higher * The “CE” mark indicates compliance with applicable directives of the European Committee for Standards.
339
Miscellaneous Tooling and Accessories Hydraulic Pumps • Used with Hose Assembly Machines 150-2568, 4C-9900, 6V-4880, 1U-6190, 7S-1100 and 5S-2801 • 10,000 psi (70,000 kPa) operating pressure Options Include: • 1/2 Horsepower 2P-5550 115V, 50/60 Hz 2P-5500 230V, 50/60 Hz
Minimum 15 Amp circuit required Minimum 15 Amp circuit required
• 1-1/8 Horsepower 3S-6224 115V, 50/60 Hz 8S-8033 230V, 50/60 Hz
Minimum 20 Amp circuit required Minimum 15 Amp circuit required
• 1-1/2 Horsepower* 1U-5555 115V, 50/60 Hz 1U-5565 230V, 50 Hz 4C-5080 230V, 60 Hz 171-5397** 230V, 50 Hz (CE)
Minimum 25 Amp circuit required Minimum 15 Amp circuit required Minimum 15 Amp circuit required Minimum 15 Amp circuit required
Tooling
*A foot switch is included only with the 1-1/2 HP pumps. ** 171-5397 is sold as a replacement pump for European Union compliant hose assembly machines. This pump requires different fittings, based on the hose assembly machine, and the fittings are not the same as those shown in the following chart.
Following parts list is to connect the power supply to the hose assembly machine: Quan.
Part No.
Description
2
8F-0024
Hose
2
135-2535
Fitting
2
135-2536
Fitting
1
136-2060
Fitting
1
136-2061
Fitting
2
136-2068
Fitting
2
1P-2375
Coupler
2
1P-2376
Coupler
NOTE: All pumps are single phase. 4C-5080 features a quiet, low rpm induction motor. A foot switch is included only with the 1-1/2 HP pumps.
What to Order: Step 1 - Order the appropriate pump, based on your electrical system. Step 2 - Order the parts needed to plumb the pump to the hose assembly machine.
340
Miscellaneous Tooling and Accessories Skiving Vise • Allows for easy skiving of hose • Blocks have rubber pads to prevent damage to hose Order: 127-1909
Vise
127-1910
Block Group
Tooling
1U-8760 Chain Wrench • Used during the disassembly of XT™ hose reusable couplings to break the bond between the hose and coupling • Can also be used for other gripping applications for diameters from 0.75 in (19.1 mm) through 3-1/4 in (82.6 mm) Order:
1U-8760
Wrench-Chain
341
Miscellaneous Tooling and Accessories Thermoplastic and Air Conditioning Hose Cutter • Used for cutting the following hose types - Thermoplastic Hose (1028), Reduced O.D. Thermoplastic Hose (2760), and Air Conditioning Hose (1543)
Tooling
Order:
177-4271
Cutter
177-4272
Blade
166-5853 Nylon Abrasion Sleeve Band Tool • The Band-It Tool 166-5853 is used to secure protective covers to hydraulic hose using the following bands:
163-8811 163-8812 163-8813 163-8814
342
34.9 mm (1.37 in) I.D. 50.4 mm (1.98 in) I.D. 76.2 mm (3.00 in) I.D. 101.6 mm (4.00 in) I.D.
Miscellaneous Tooling and Accessories Crimp Measuring Tools and Accessories • Digital Caliper 136-0536 is used for measuring crimp diameters to ensure they meet specifications • Mini Processor 136-0544, when connected to the digital caliper via the Cable 136-0538, can be used to record crimp diameter measurements and provide a paper record
136-0536
136-0538 279-7315
136-0539
• Foot Switch 136-0539 is an option for entering data Crimp Measuring Tools, Accessories and Consumables (Must be ordered separately) 136-0536 279-7315 136-0538 136-0539 9U-6690 279-7316
Digital Caliper Mini Processor Cable to Attach to Caliper Foot Switch Replacement Ribbon Paper
Tooling
8T-0450 Thread Measurement Kit • Allows for measurement and identification of coupling • Includes PEGP2007-01 Coupling Identification Guide • Recommended for all dealer hose assembly areas Thread Measurement Kit 8T-0450 includes: 8T-0477
Dial Caliper
8T-0448
Pitch Gauge
8T-0449
Seat Angle Gauge (45° and 37°)
8T-0451
Seat Angle Gauge (30° and 12°
PEGP2007 Coupling Identification Guide
343
Miscellaneous Tooling and Accessories 266-7533 Large-bore Protractor
Tooling
• Provides a field tool for the technician to sent the angle of orientation for large-bore hose 2.5 to 3.5 inches (63.5 mm to 78.9 mm)
Snap-to-Connect Coupling Wrenches • Provides wrenches for snap-to-connect couplings.
344
279-1218
Wrench (-6)
279-1221
Wrench (-12)
279-1219
Wrench (-8)
279-1222
Wrench (-16)
279-1220
Wrench (-10)
Service Parts for Current Hose Assembly Machines This section provides information on the serviceable parts for current Caterpillar hose assembly machines.
286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper Service Parts for 286-4354, 233-8038, 286-4355, 275-6199 and 286-4353 Cat Crimputer II Radial Crimper Groups
Service Parts for 286-4354, 233-8038, 286-4355, 275-6199 and 2864353 Cat Crimputer II Radial Crimper Groups
Item
Qty.
Part No.
Description
Item
Qty.
Part No.
Description
1
1
226.011, 226.0365
Electric Motor
18
2
8T-4192
Bolt
2
1
M281,3,5, M292
Clutch
19
2
8T-4223
Washer Nut
3
1
PL250-1-8
Bell Housing
20
2
8T-4244
4
1
8.12.006
Connector
21
1
235.021
Manifold Block
5
1
226.001
Sight Gauge
22
1
235.1000
Complete Tool Set
6
1
VST1 1/2-EDA3C
Plug
23
1
8.06.005
Power Switch
1
235.007.1
Reservoir
7
1
235.015.3
Bracket
24
8
1
235.400
Power Cable
25
1
239.516
Filter
9
1
FU-USA 2
Pedal Switch
26
1
1D7RO1,5 1D9RO2,3
Hydraulic Pump
10
1
5024 4123
Connector
27
1
NEEG2539
Decal
3/8 in GE12ZLRED
Connector
28
1
VST1 1/4-EDA3C
Plug Check Valve
11
1 1
235.022.3
Tube
29
1
235.030
13
4
FM12LA3C
Nut
30
1
235.042.2
Front Cover
14
2
EW12LREDOMD
Elbow
31
1
238.0554
Potentiometer
15
1
235.023.3
Tube
32
2
239.034
Connector
16
3
3/8 in GE12ZLRED
Connector
33
1
235.045.3
Plate
17
1
GN552-R3/4-A1
Plug
34
1
235.043.3
Holder Pickup
Tooling
12
1233-8026 2233-8033 3233-8035 and 233-8037 4Can also be serviced with 233-8085 Potentiometer 5233-8027 NOTE: For replacement parts, other than Caterpillar, call the Dealer Service Tools Hotline.
345
Service Parts for Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper
11 1
12 1
13 2
14 1 41 1
10 1
37 1 33 1
14 1
21 REF
13 2
15 1
38 1 16 3
17 1
38 1
36 1
VIEW A-A 18 2
Tooling
39 1
19 2
22 1
21 1
20 2
40 1
39 1
B
10 REF
B 23 1
VIEW B-B R
24 1
25 1 1 1
2 1
3 1
4 1 30 1
26 1
27 1
28 1
29 1
31
32
1
2
A 7 1
35 2
5 1
6 1
34 1
8 1
9 1
346
A
0870-146
Service Parts for Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper Foot Switch Schematic
3
4
(4)
PE
(3)
2
(yellow-green)
(2)
(1)
1
23
23
24
24
Tooling
0870-163
347
Service Parts for Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper Hydraulic Schematic
Tooling
50 bar
Y1
A
B
P
T
Y2
280 bar
M
0870-139
348
Service Parts for Current Hose Assembly Machines 286-4354 / 233-8038 / 286-4355 / 275-6199 / 286-4353 Cat Crimputer II Radial Crimper
Crimputer II and Electrical Schematic
X12
X20
-11
-20
-10
-19 -10
-Stop
-18
-1
A1
-K1M
A2
-1
K1M 13 14
-17
-2 -2
-Sta rt
-16
-23
-F1.1
-23 -EStop
-24
44
43
-22
+ to transformer
-15
+C03_CAT_233_8026-24V
-14
+C03_CAT_233_8026-0V
-24 -22
-
-13
Tooling
-HAND-FOO T
-press-open
-open -14
+
-12 -14
C -
-11 -10
-pres s-clo se
-clos e
+
-9
-17
C
-17
-J7-6
-
-8 -7
X21 -4
-5 -2
open
-3
-6 -6
X7 -3
-2
-7 -7
23
-1
-8
-R7
-
-2 +
-5 -J6-1
-1 -5
-1
24
Double-pedal-switch
-4
-8
-J6-2
23
-3 -PE
24
-9
-J6-3
press
-6
-9
potentiometer position feedback
-PE -PE
-4 -12 -13 -15 -16 -18 -19 -20 -21
0870-164
349
Service Parts for Current Hose Assembly Machines
Tooling
150-2568 / 173-9805 XT™ Hose Assembly Machine
Service Parts for 150-2568 XTHose Assembly Machine Item No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
350
Part No. 6V-4973 191-6671 4C-9837 1U-9681 4C-9835 4C-9834 195-3457 191-6668 191-6670 4C-9833 191-6667 0S-1614 5S-2586 6V-4914 4C-9836 6B-6682 173-9807 150-2566
Description Tube-Oil Shield Block Screw-Clamping Screw Stop Latch Cap-Piston End Barrel-Cylinder Rail Cap-Rod End Bolt-Hex Head Bolt-Hex Sock HD Bar-Clamp Spacer Hex Nut-Full Bolster-Front Spacer
Item No. 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 —
Part No. 1S-3794 150-2567 4C-6074 191-6665 4C-6079 1D-5120 5P-4720 5P-0537 178-6918 NEHS0745 NEHS0748 NEHS0749 NEHS0750 NEHS0768 135-2535 168-3349 136-2062 3J-5390 2P-5480
Description Bolt Bolster-Rear Rod-Tie Rod-Piston Plate Jam Nut Fitting Washer Flange-Cylinder Manual Manual Manual Manual Manual Fitting-Adapter Plug-Pipe Adapter-Fitting Plug-Pipe Kit-Seal
Service Parts for Current Hose Assembly Machines 243-0765 Bench Model II Hose Assembly Machine
1
12 11 19
2 10
18
1
1
9 3 8
13
Tooling
4
14 6, 11 15, 16
1 5
20
1
17
090 Parts for 243-0765 Bench Model Hose Machine Item
Part No.
Description
Item
Part No.
Description
1
0S-1621
Bolt
12
160-2526
Guard
2
2M-0400
Full Nut
13
161-3955
Top Plate
3
161-3953
Threaded Rod
14
139-5444
Pusher Tube
4
-
15
139-5446
Half Pusher
5
6L-5897
Bolt
Side Bracket (not serviced)
16
139-5445
Half Pusher Assembly
6
0S-1591
Bolt
17
243-0764
Bowl Plate
7
-
-
18
161-4304
Set Screw
8
-
Side Bracket (not serviced)
19
150-3624
Hydraulic Cylinder
9
161-3957
Plate
20
157-6125
Stand (optional)
10
6V-4792
Screw
-
NEHS0902
Manual
11
NEEG2535
Decal
-
163-5469
Cylinder Seal Kit for 150-3624
351
Service Parts for Current Hose Assembly Machines 209-3153 Portable Hose Assembly Machine
Tooling
Parts for 209-3153 Portable Hose Assembly Machine
352
Item
Part No.
Description
1
209-3158
Stand As.
2
0S-1588
Bolt
3
209-3159
Rod-Threaded
4
3S-1356
Nut
5
209-3154
Plate As. - Top
6
209-3161
Tube As.
7
209-3160
Plate - Mounting
8
209-3165
Knob
9
1J-6655
Lockwasher
10
4D-3120
Bolt
11
6L-5897
Bolt
12
139-5446
Pusher - Half
13
139-5445
Pusher As. - Half
14
6V-4792
Screw - Machine
15
209-3157
Cylinder Gp - Hydraulic
16
139-5444
Tube - Pusher
17
209-3156
Plate - Bottom
—
NEHS0902
Manual
Service Parts for Current Hose Assembly Machines 145-5161 Floor Model Hose Assembly Machine Additional Repair Parts for Manual Valve: Item No.
Part No.
Description
1
7V-6480
Screw, Pan Head
173-3227
Valve, Retainer
2
145-6950
Guard
173-3228
Valve, Spring
3
145-6951
Guard
191-6623
Valve, Handle
4
146-8880
Stand Assembly
5
3B-6768
Bushing, Reducing
6
6M-6853
Tee, O-ring
7
6V-6960
Bolt, Socket Head
8
145-6948
Plate
9
145-6944
Hose Assembly Group
10
134-4716
Guard Screw, Machine
11
2N-3478
12
0S-1587
13
—
14
NEEG2539
Decal
15
134-5538
Guard
NOTE: See drawing – 0695-05 on the following page.
Bolt —
0S-1614
Bolt
17
4C-6521
Collar
18
145-6949
Bracket Assembly
19
9S-8750
Nut
20
134-5406
Hose Assembly
21
136-7955
Tee, Thread
22
2N-8037
Elbow
23
135-2533
Fitting, Adapter
24
9R-3971
Rod
25
136-1148
Valve, Four-Way
26
0S-1615
Bolt
27
0S-1621
Bolt
28
9S-8004
Plug, O-ring
29
NEHS0695
30
5P-0537
Washer, Hard
31
137-7713
Nipple Assembly
32
134-5407
Hose Assembly
33
8T-4188
Adapter, Union
34
147-4439
Gauge, Pressure
35
135-2535
Fitting, Adapter
36
135-2535
Fitting, Adapter
37
136-2059
Fitting, Adapter
38
136-1092
Hose Assembly
39
134-5408
Hose Assembly
40
134-5409
Hose Assembly
41
147-4440
Valve, Solenoid
Tooling
16
Tool Operating Manual
42
—
43
136-7203
Subplate Fitting, Adapter
44
135-2535
Fitting, Adapter
45
136-1093
Hose Assembly
46
1U-5754
Hose Assembly
353
Service Parts for Current Hose Assembly Machines
Tooling
145-5161 Floor Model Hose Assembly Machine: Drawing 0695-05
0695-05
354
Service Parts for Current Hose Assembly Machines 145-5161 Floor Model Hose Assembly Machine: 145-6944 Hose Assembly Group Chart B. Part No. 2M-0400 131-3038 133-9851 131-3039 131-3034 1339890
Description Nut Bolt Plate Plate Rod, Threaded Plate Tube Assembly, Extractor
8 9 10
133-9846 145-6947
Bolt, Socket Head Tube Rod, Threaded
11 12 13
5S-0003 137-7553 134-5902
Nut Cylinder, Hydraulic Tube
14 15 16
133-9887 133-9889 6L-5897
Pusher, Half Pusher Assembly, Half Bolt
17 18 19
145-6946 8T-8890 145-7047
Spring Washer Spacer
172-7095 191-6624
Seal Kit Valve, Relief
NOTE: See drawing – 0695-12
Tooling
Item No. 1 2 3 4 5 6 7
Additional Repair Parts:
355
Service Parts for Current Hose Assembly Machines
Tooling
145-5161 Floor Model Assembly Machine: Drawing 0695-12
0695-12
356
Service Parts for Current Hose Assembly Machines 145-5161 Floor Model Hose Assembly Machine 146-5861 Crimputer Group Item 1 2 3 4 5 6 7 8 9 10
Part No 140-2845 147-2641 1U-9485 145-7046 145-7045 145-7044 145-7043 147-2407 6D-3897 152-8008
Description Crimputer Potentiometer Power Cable Valve Cable Caliper Cable Caliper Cable Assembly Plate Socket Head Bolt Calibration Plate
Tooling
357
Service Parts for Current Hose Assembly Machines 145-5161 Floor Model Hose Assembly Machine
Tooling
147-4438 and 147-4437 Power Supply Groups
0695-06
Chart A. Item No. 1 2 3 4A 4B 5 6 7 8 9 10 11
358
Part No. 149-5477 136-1149 137-7719 138-8407 030-8189 9U-6988 9U-6978 9U-6986
Description Wire, Electric Cord Grip Motor, Starter Power Supply Power Supply Connector Coupler Assembly Connector, Flared Head Filter Element Connector Gauge
Service Parts for Current Hose Assembly Machines 139-5439 / 145-3381 Combination Hose Assembly Machines 146-2460 Part List for the Combination Hose Assembly Machine Item
Qty
Part No.
1
1
141-2377
2
1
5P-3411
3
4
8T-9377
4
1
140-6235
5
—
6
2
7 8
—
Description Stand Assembly
146-2461
Elbow Bolt, Shoulder
146-6241
Cylinder Group, Hydraulic Hose, 6 cm (2.4 in)
176-2894
Clamp
1
160-2516
Plate, Clamp
1
NEEG2003
9
4
0S-1615
Bolt
10
4
9S-8750
Nut
11
3
2N-3478
Screw, Machine
12
1
146-6165
Tube Assembly
13
1
146-5849
Hose Assembly
14
1
145-3383
Gauge
15
1
061-8268
Reducer, Flared
16
1
8M-0744
Nut
17
2
030-8310
18
1
7D-0978
19
1
146-5847
20
6
123-3202
21
1
—
22
1
146-5848
23
1
2P-7211
24
1
25
149-7359
Power Supply Group, 220 VAC, 50/60 Hz, 1 phase (Refer to separate illustration for item details.) Power Supply Group, 230/460 VAC, 60 Hz, 3 phase (Refer to separate illustration for item details.) Power Supply Group, 220/380 VAC, 50 Hz, three phase (Refer to separate illustration for item details.) Power Supply Group, 115 VAC, 60 Hz, 1 phase (Refer to separate illustration for item details.)
Decal
Connector, Flared Tee, Swivel
Tooling
Hose Assembly Strap, Cable Valve, Solenoid
Additional Repair Parts:
Hose Assembly Tee, O-Ring Port
172-0978
Rod and Piston Assembly
146-5850
Tube Assembly
172-0979
Rod Gland
1
146-5851
Tube Assembly
164-0791
Seal Kit (for one cylinder)
26
1
146-5852
Tube Assembly
197-0718
Solenoid Valve (complete unit)
27
1
2P-1297
Tee, O-Ring Port
197-0719
Cartridge Replacement
28
3
3R-9704
Elbow, Swivel
197-0720
Valve Body Replacement
29
2
2P-2061
Connector
197-1325
Coil Replacement
30
1
146-5853
Tube Assembly
31
2
005-9702
Tee
32
1
146-5854
Tube Assembly
33
2
5P-3466
Elbow, O-Ring
34
1
146-5855
Tube Assembly
35
1
146-5856
Tube Assembly
36
1
139-5449
Valve, Directional
37
3
7B-2742
38
2
001-6301
Elbow, Flared
39
1
159-0221
Plate, Clamp
40
4
175-0055
Spacer
41
28
175-0057
42
4
7X-0772
Washer, Hard
43
4
8T-4223
Washer, Hard
44
4
7X-0578
Washer, Hard
45
2
9G-9923
46
2
176-2895
47
1
—
NOTE: See drawing – 0686-58
Bolt
Washer, Spring
Pin, Spring Knob Bar Assembly, Tool
359
Service Parts for Current Hose Assembly Machines
Tooling
139-5439 / 145-3381 Combination Hose Assembly Machines
0686-58
360
Service Parts for Current Hose Assembly Machines 139-5439 / 145-3381 Combination Hose Assembly Machines
Tooling
Power Supply Groups 146-2460, 146-2461, 146-6241, and 149-7359. Refer to Chart A for item identification.
Chart A. Power Supply Group Combination Hose Assembly Machine Item
Qty
1
1
2 3 4 5 6 7 8
1 1 1 1 1 4 —
Part No.
Description
146-2457
Motor, Electric, 220 VAC, 50/60 Hz, 1 phase (146-2460)
146-2458
Motor, Electric, 230/460 VAC, 60 Hz, 3 phase (146-2461)
140-6240
Motor, Electric, 220/380/440 VAC, 50 Hz, 3 phase (140-6241)
149-7363
Motor, Electric, 115 VAC, 60 Hz, 1 phase (149-7359)
149-7359
Motor, Electric, 115 VAC, 60 Hz, 1 phase
9U-6988 9U-6981 6V-7483 1F-6660 147-1263 0S-1617 122-6915
Head Filter Element Adapter, Straight Nipple, Pipe Coupling Assembly Bolt Hose, 152 mm (6.0 in)
Item
Qty
9 10 11 12 13
2 1 1 1 1
Part No. 9M-0164 033-0820 3B-7257 147-1264 149-7364
14 15 16 17 18 19 20 21
1 1 4 1 1 1 1 —
— 147-1265 0S-1595 139-5448 — 147-1545 9U-6986 —
22 23
3 1
— 149-5477
Description Clamp Elbow, 90° Bushing, Reducing Element Pump (149-7363 only) Adapter Gasket Bolt Tank Cover Kit Gasket Gauge Wire, Electric 549 cm (18 ft) Cord Grip Starter, Motor
361
Service Parts for Non-Current Hose Assembly Machines This section provides information on the serviceable parts for non-current Caterpillar hose assembly machines.
4C-3660, 4C-5052, 4C-5053, 9U-5792, 9U-7261 Hose Assembly Machines • Not for reusable couplings • Crimps all permanent couplings through 2.00 in (50.8 mm) (-32) • These machines are non-current. Replacement parts listed below.
Tooling
Available Replacement Parts: 4C-4378
Adapter-Bowl Assembly
4C-4375
Conical Spring
4C-4376
Snap Ring
135-4561
Separator
133-7362
Die Rest for up to 1.25 in (31.75 mm) I.D. Hose
133-7363
Die Rest for 1.50 in (38.1 mm) and 2.00 in (50.8 mm) I.D. Hose
4C-3059
Guard
4C-4373
Split Die Ring
134-9585 134-9586 134-9587 134-9588 134-9589 134-9593
Spacer Rings for 294 and 844 0.25 in (6.4 mm) to 1.25 in (31.75 mm) I.D. Hose
135-4288 135-4289 135-4290 135-4291
Spacer Plates for 294 and 844 1.50 in (38.1 mm) and 2.00 in (50.8 mm) I.D. Hose
4C-4372
Die Ring for 1543
NOTE: This table shows the die groups available for the hose types and sizes that can be crimped using the Hose Assembly Machine 4C-3660, 4C-5052, 4C-5053, 9U-5792, and 9U-7261. Dash#
Type XT-6™ ES
XT-6
XT-5™ ES XT-3™ ES 1956
716
294
844
-3
2760
1543
4C-3668
-4
130-2185 130-2185
4C-3669 144-4379
-5
130-2186
4C-3671 144-4380
-6
191-0800
130-5388
130-5381
129-9183 130-2187 130-2187
4C-3672 144-4381
4C-3675
-8
191-0801
130-5389
130-5382
129-9184 130-2188 130-2188
4C-3673 144-4382
4C-3676
-10
191-0802
130-5383
129-9185 130-2189 130-2189
214-5155
-12
191-0803
130-5384
129-9186 130-2190 130-2190 130-2190 4C-3674
4C-3677
130-5390
130-5386
189-0990
-14 -16
191-0804
-20 -24 -32 † 233-0350 split pusher required.
362
1028
130-5387
130-5385
129-9187 130-2191 130-2191 130-2191
233-0349†
233-0346
129-9188 130-2192 130-2192 130-2192
233-0347†
130-2561 130-2194 130-2194 130-2194
233-0348†
130-2562 130-2195 130-2195 130-2195
Service Parts for Non-Current Hose Assembly Machines 7S-1100 Hose Assembly Machine • Assembles/disassembles all sizes of XT™ hose reusable couplings up to 50.8 mm (2 in) XT-3™ ES; 38.1 mm (1.5 in) XT-5™ ES and 31.8 mm (1.25 in) XT-6™ • Crimps most permanent couplings through 1.00 in (-16) (See chart below) • These machines are non-current. Replacement parts listed below. Available Replacement Parts NOTE: Refer to 7S-100 Tooling Group for a complete list of part numbers included in the 7S-1100 Hose Assembly Machine Group and 5P-5255 Collet Group. 4C-6601
Stand
5P-5255
XT-5 ES, XT-6 Reusable Coupling Tooling Group
1U-7614
Plate (for use with -6 and -8 bent stem and large head couplings)
141-9718
Die Bowl
136-3635
Sleeve
8T-5121
Plate
1V-9646
Pusher
4C-4375
Spring
133-7362
Die Rest
135-4561
Die Separator Die Ring for 1543
8T-5125
Die Ring for 1028
134-9572 134-9573 134-9574 134-9575 134-9576 134-9577 134-9580
Spacer Rings for 294 and 844 0.25 in (6.4 mm) through 1.00 in (25.4 mm) I.D. Hose
Tooling
4C-4625
NOTE: This table shows the die groups available for the hose types and sizes that can be crimped using the Hose Assembly Machine 7S-1100. Dash#
Type XT-6 ES
XT-6
XT-5 ES XT-3 ES
1956
716
294
844
-3
1028
2760
1543
4C-3668
-4
130-2185 130-2185
4C-3669 144-4379
-5
130-2186
4C-3671 144-4380
-6
191-0800
130-5388
130-5381
129-9183 130-2187 130-2187
4C-3672 144-4381
4C-3675
-8
191-0801
130-5389
130-5382
129-9184 130-2188 130-2188
4C-3673 144-4382
4C-3676
-10
191-0802
130-5383
129-9185 130-2189 130-2189
214-5155
-12
191-0803
130-5384
129-9186 130-2190 130-2190 130-2190 4C-3674
4C-3677
130-5390 130-5386
189-0990
-14 -16
130-2191 130-2191 130-2191
Replacement Power Supply: Pumps sold separately (Note: See Machine 150-2568 for pump options)
363
Service Parts for Non-Current Hose Assembly Machines 7S-1100 Tooling Group for XT™ Hose Assembly
Tooling
The 7S-1100 Tool Group originally included reusable coupling tooling. The group is not available but the reusable coupling tooling is available as separate parts. Item
Part No.
Description
Part No.
Description
1.
4C-5880
Collet, 3/8 in
Item 3
5S-2850
Collet, Top, 2 in
1
4C-5881
Collet, 1/2 in
3
5S-2851
Collet, Bottom, 2 in
1
4C-5882
Collet, 3/4 in
4.
5S-2864
Plate
1
4C-5883
Collet, 1 in
5.
5S-2805
Finger Expander, 3/8 in
1
4C-5884
Collet, 1-1/4 in
5
5S-2811
Finger Expander, 1/2 in
5S-2823
Finger Expander, 3/4 in
1
4C-5885
Collet, 1-1/2 in
5
1
4C-5886
Collet, 2 in
5
5P-0973
Finger Expander, 1 in
2.
8S-9489
Grip Collet, Top, 3/8 in, 1/2 in, 3/4 in, and 1 in
5
5S-2837
Finger Expander, 1-1/4 in
2
8S-9486
Grip Collet, Bottom, 3/8 in, 1/2 in, 3/4 in, and 1 in
5
5S-2843
Finger Expander, 1-1/2 in
5
5S-2849
Finger Expander, 2 in
2
5P-3532
Grip Collet, Top, 1-1/4 in, 1-1/2 in, 2 in
2
5P-3533
Grip Collet, Bottom, 1-1/4 in, 1-1/2 in, 2 in
3.
8T-0446
Collet, Top
3
8T-0445
Collet, Bottom
3
9S-4519
Collet, Top
3
9S-4520
Collet, Bottom
3
9S-4517
Collet, Top
3
9S-4518
Collet, Bottom
3
9S-4515
Collet, Top
3
9S-4516
Collet, Bottom
3
9S-4513
Collet, Top
3
9S-4514
Collet, Bottom
3
5S-2838
Collet, Top
3
5S-2839
Collet, Bottom
3
5S-2844
Collet, Top
3
5S-2845
Collet, Bottom
364
6.
170-5688
Stem Expander As., 3/8 in
6
170-5690
Stem Expander As., 3/4 in
6
170-5687
Stem Expander As., 1/2 in
6
170-5689
Stem Expander As., 1 in
6
170-5683
Stem Expander As., 3/4 in XT-6
6
170-5684
Stem Expander As., 1 in XT-6
6
5P-5234
Stem Expander As., 1-1/4 in
6
5P-5235
Stem Expander As., 1-1/2 in
6
5P-5236
Stem Expander As., 2 in
7.
5S-2808
Pusher, Stem, 3/8 in
7
5S-2814
Pusher, Stem, 1/2 in
7
5S-2826
Pusher, Stem, 3/4 in
7
5P-2834
Pusher, Stem, 1 in
7
5S-2840
Pusher, Stem, 1-1/4 in
7
5S-2846
Pusher, Stem, 1-1/2 in
7
5S-2852
Pusher, Stem, 2 in
Service Parts for Non-Current Hose Assembly Machines 5P-5255 Collet Group for XT-6™ and XT-5 ES™ Hose Assembly • Use with XT™ Hose Assembly Machine 7S-1100 Also available as separate parts:
1.
5P-4780 Collet, Bottom, 3/4 in Backup
2.
5P-4781 Collet, Top, 3/4 in Backup
3.
5P-4782 Collet, Bottom, 1 in Backup
4.
5P-4783 Collet, Top, 1 in Backup
5.
5P-4784 Collet, Bottom, 3/4 in Sleeve
6.
5P-4785 Collet, Top, 3/4 in Sleeve
7.
5P-4786 Collet, Bottom, 1 in Sleeve
8.
5P-4796 Collet, Top, 1 in Sleeve
9.
5P-4797 Collet, Bottom, 1-1/2 in Sleeve
10.
5P-4798 Collet, Top, 1-1/2 in Sleeve
Tooling
365
Reference Material Information Systems ELECTRONIC ACCESS TO INFORMATION ON CAT HOSE PRODUCTS AND ASSEMBLIES:
MEDIA NO.
Hydraulic Information System - Web Version N/A Recommended for Cat Dealer parts counters, hose assembly areas, and repair shops. Accessible via Caterpillar’s Extranet. Hydraulic Information System - CD-ROM Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JERC2281 Recommended for Cat Dealer personnel when connections to the web version are not available. See Caterpillar’s Extranet for media number information. Hose & Coupling Information System - CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JERC2282 Recommended for Authorized Sales and Service Centers (ASSCs), and customer hose assemblers.
Training Materials MATERIALS AIMED AT EDUCATING DEALER SALES AND HOSE ASSEMBLY PERSONNEL
MEDIA NO.
Hose and Coupling Work book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick Reference - Cat Hose and Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coupling Identification Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose & Coupling 4.5 Day Training Program - CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Parts Pro - Basic Product Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PEGT6025 PEGJ0001 PEGP2007 SERF8795 PERT9032
Product Datasheets DOCUMENTS INFORMING CATERPILLAR CUSTOMERS ABOUT CAT PARTS PRODUCTS AND SERVICES
MEDIA NO.
Caterpillar O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reusable Couplings for XT™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT™ ES Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . The Last Coupling You’ll Ever Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . O-Ring Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat Tough Guard Hose. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PEHP9559 PEHP6033 PEHP9519 PEHP9524 PEHP9520 PEHJ0077
Reference Material
Information Release Memos (IRMs) DOCUMENTS INFORMING CAT DEALERS ABOUT CAT PARTS PRODUCTS AND SERVICES
MEDIA NO.
Product Line Expansion: Komatsu-style Bent Couplings for XT-3™ ES Hose . . . . . . . . . . . . . . . . . . . . . . . . Reusable Couplings for Caterpillar -12 and -16 XT-6™ ES Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Upgrade: XT-6™ Hose and Couplings to XT-6 ES Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Expansion: Couplings and Dies For Competitive Brands of Mobile Equipment . . . . . . . . . . . . . . . . . New Hydraulics Hotline for Hose/Couplings and Pump/Motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New Hose Training CD Available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Heavy-Duty Plastic Bulk Hose Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Expanded Product Offering for Air Conditioning Hose and Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Anchor Branded Couplings for Other Brands of Mobile Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar Couplings for Other Brands of Mobile Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar XT-6™ ES Hose and Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High Vibration Couplings for Hydraulic Hammers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PELJ0332 PELJ0340 PELJ0341 PELJ0220 PELJ0227 PELJ0261 PELM1038 PELM1057 PELM1060 PELM1061 PELM1095 PELM1005
366
Reference Material Information Release Memos (IRMs) - (continued) DOCUMENTS INFORMING CAT DEALERS ABOUT CAT PARTS PRODUCTS AND SERVICES
MEDIA NO.
Expansion to Caterpillar 1543 Air Conditioning Hose and Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Announcing: Hose Assembly Consist Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedures for Using Cat’s 130-6061 and 156-0058 Hose Cleaner Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar 1 1/2 in XT-6™ Hose, Couplings and Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Preconditioning Caterpillar XT™ Hydraulic Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT™ Hose Stem Expanders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat Low/Medium Pressure Couplings for Other Brands of Mobile Equipment . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar Quick Disconnect Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar XT-3™ ES Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT-6™ Hose Assemblies Used on Cat Excavators and Front Shovels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . New Hose Cleaner Group 156-0058 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caterpillar Hose Assembly System: Use and Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PELM0977 PELM0969 PELM0955 PELM0952 PELM0951 PELM0958 PELM0947 PELM0945 PELM0937 PELM0892 PELM0886 PELM0784 PELM0591
Posters / Wall Charts MEDIA NO. Quality Hose Assemblies For All Brands of Mobile Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Proper Hose Cleaning Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coupling Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT™ Hose Assembly and Coupling Recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat Hoses & Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Skive Length Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Cleaning Projectile Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Crimp Diameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coupling Crimp Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose, Die Group, Spacer Ring Selection Chart - XT Machine, Combo Machine . . . . . . . . . . . . . . . . . . . . . . . Hose, Die Group, Spacer Ring Selection Chart - Non-Current Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose, Die Group, Spacer Ring Selection Chart - Bench Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Variable Die Bowl & Smooth Bore Dies Hose, Die Group and Spacer Ring Selection Chart for 4C-3660, 4C-5052, 4C-5053, 9U-5792 and 9U-7261 Hydraulic Hose Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coupling Crimp Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PEPJ0008 PEPJ0084 PEWP4128 PEWP3013 PEPP7026 NEEG2956 NEEG2955 NEEG2746 NEEG2973 NEEG2737 NEEG2736 NEEG2883 NEEG3000 NEEG2973
Forms Reference Material
MEDIA NO. Hose and Coupling Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PEEP5210
Videos MEDIA NO.. Cat Hose & Couplings: The Preferred Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fluid Contamination - The Silent Thief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose and Coupling Training Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT Machine Use and Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Recovery and Assembly of XT™ Hose Reusable Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PEVN4729 PEVN4632 PEVN3808 PEVN4814 PEVN5041
367
Reference Material Promotion MATERIALS AIMED AT PROMOTING CAT HOSE PRODUCTS AND DEALER SERVICES TO CUSTOMERS
MEDIA NO.
Quality Hose Assembly for All Brands of Mobile Equipment - Poster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Certified Clean Hose Sticker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Certified Crimp Sticker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat Hose and Couplings: The Preferred Connection Brochure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT™ -ES Hose Counter Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XT™ -ES Hose Counter Display (Sign Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bin Labels - XT™ Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bin Labels - Low/Medium Pressure Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bin Labels - Special Application Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bin Labels - 2760 Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bin Labels - DIN Hose Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reusable Coupling Sticker (Large) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reusable Coupling Sticker (Small) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PEWJ0023 NEEG2828 NEEG2829 PEDP9122 PEWP9739 PEWP9740 PEEP1003 PEEP1004 PEEP6044 PEXP8025 PEEP6043 PEEP7210 PEEP3214
CDs MEDIA NO. Cat Hydraulics Resource Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PERJ0045 Service Operations Development & Assessment (SODA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SERF8918 Cat Hose and Couplings: The Preferred Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PERV4729
Technical Information
Reference Material
TOOL OPERATING MANUALS AND MISCELLANEOUS REFERENCE MATERIALS Use of 7S-1100 Hydraulic Press Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use of 8T-5120 and 8T-5130 Crimp Tool Groups In Either 7S-1100 Press Arrangement or 4C-9900, 1U-9160, and 6V-4880 Hydraulic Hose Service Press . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reusable Couplings for Caterpillar XT-3™, XT-5™, and XT-6™ Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Crimping Caterpillar 294, 716, and 844 Hose & Couplings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cleaning Hose & Tube Assemblies Using the 156-0058 and 130-6061 Hose Cleaner Groups . . . . . . . . . . . . . Preparation and Use of 6V-6015 Hose Cutoff Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assembling Reusable Couplings in the 139-5439, 145-3381, and 152-3910 Combination Hose Machines . . . Setup and Operation of the 145-7042 and 146-5861 Crimputer Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Information for Hose Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Assembling Reusable Couplings in the 4C-9900, 150-2568 and 173-9805 Hydraulic Hose Machines . . . . . . Crimping 1028 Thermoplastic and 1543 Air Conditioning Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Crimping permanent couplings using the 136-3642 Crimp Tool Group in the Combination and XT™ Hose Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Comprehensive Tooling List for Assembling and Disassembling Reusable Couplings . . . . . . . . . . . . . . . . . . . Repair of 139-5459 and 145-3381 Combination Hose Machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup and Basic Operation of the 145-5161 Floor Model Hose Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150-3622 Bench Model Hose Machine Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setup and Basic Operation of the 139-5439 Combination Hose Machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Use of the 9U-5792, 4C-5052, 4C-5054, 4C-3670 and 4C-3680 Hydraulic Hose Machines . . . . . . . . . . . . . . Using the 130-6061 and 156-0058 Hose Cleaner Groups. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hose Cutting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
368
MEDIA NO. SEHS6880 SEHS8587 SEBF8176 NEHS0664 SEBF8485 SMHS8316 NEHS0746 NEHS0754 NEHS0768 NEHS0745 NEHS0749 NEHS0748 NEHS0750 NEHS0752 NEHS0695 NEHS0715 NEHS0686 NEHS0744 NEHS0643 NEHS6601
Part Number Index Part No.
Page No.
000-7244 . . . . . . . 000-7246 . . . . . . . 001-5262 . . . . . . . 001-5744 . . . . . . . 001-6285 . . . . . . . 001-6286 . . . . . . . 001-6287 . . . . . . . 001-6289 . . . . . . . 001-6300 . . . . . . . 001-6301 . . . . . . . 001-6304 . . . . . . . 001-6412 . . . . . . . 001-6449 . . . . . . . 001-6498 . . . . . . . 001-6842 . . . . . . . 001-6936 . . . . . . . 001-7003 . . . . . . . 001-7004 . . . . . . . 001-7014 . . . . . . . 001-7025 . . . . . . . 001-7039 . . . . . . . 001-7041 . . . . . . . 001-7042 . . . . . . . 001-7043 . . . . . . . 001-9440 . . . . . . . 002-0639 . . . . . . . 002-1199 . . . . . . . 002-5299 . . . . . . . 002-5743 . . . . . . . 002-6453 . . . . . . . 002-6454 . . . . . . . 003-0632 . . . . . . . 003-0633 . . . . . . . 003-2143 . . . . . . . 003-6997 . . . . . . . 003-7030 . . . . . . . 003-8470 . . . . . . . 003-8581 . . . . . . . 003-8747 . . . . . . . 003-9014 . . . . . . . 003-9163 . . . . . . . 003-9514 . . . . . . . 004-3099 . . . . . . . 004-3802 . . . . . . . 004-3935 . . . . . . . 004-4659 . . . . . . . 004-4914 . . . . . . . 004-4977 . . . . . . . 004-5703 . . . . . . . 004-5933 . . . . . . . 004-6683 . . . . . . . 004-7131 . . . . . . . 004-7270 . . . . . . . 004-7617 . . . . . . . 004-7626 . . . . . . . 005-0658 . . . . . . . 005-3969 . . . . . . . 005-4173 . . . . . . . 005-4362 . . . . . . .
173 173 242 187 154 154 154 154 199 187 186 185 185 186 197 187 185 185 254 185 187 185 186 186 185 172 187 179 173 174 172 186 187 174 246 243 180 196 176 176 174 175 185 243 243 174 179 242 173 179 172 246 172 174 185 191 190 191 190
2006-02-28 16:22:25.0
Part No.
Page No.
005-5421 . . . . . . . 196 005-7541 . . . . . . . 174 005-8615 . . . . . . . 172 005-9129 . . . . . . . 200 005-9702 . . . . . . . 196 006-0210 . . . . . . . 180 006-0315 . . . . . . . 197 006-2325 . . . . . . . 187 006-5707 . . . . . . . 174 007-0950 . . . . . . . 173 008-2649 . . . . . . . 176 008-6325 . . . . . . . 191 008-8381 . . . . . . . 191 009-4440 . . . . . . . 185 009-9696 . . . . . . . 186 011-5224 . . . . . . . 173 018-6477 . . . . . . . 177 018-9439 . . . . . . . 180 030-0701 . . . . . . . 191 030-0702 . . . . . . . 187 030-3978 . . . . . . . 188 030-4285 . . . . . . . 189 030-4606 . . . . . . . 263, 269,274 030-6816 . . . . . . . 190 030-6817 . . . . . . . 246 030-6818 . . . . . . . 246 030-6819 . . . . . . . 246 030-6935 . . . . . . . 183 030-6936 . . . . . . . 184 030-6984 . . . . . . . 188 030-7139 . . . . . . . 172 030-7935 . . . . . . . 189 030-7936 . . . . . . . 188 030-7937 . . . . . . . 188 030-7941 . . . . . . . 190 030-7942 . . . . . . . 190 030-7943 . . . . . . . 190 030-7944 . . . . . . . 190 030-7945 . . . . . . . 190 030-7946 . . . . . . . 190 030-7947 . . . . . . . 190 030-7949 . . . . . . . 191 030-7950 . . . . . . . 191 030-7951 . . . . . . . 191 030-7953 . . . . . . . 191 030-7955 . . . . . . . 200 030-7957 . . . . . . . 198 030-7959 . . . . . . . 198 030-7960 . . . . . . . 198 030-7961 . . . . . . . 183 030-7962 . . . . . . . 183 030-7963 . . . . . . . 183 030-7964 . . . . . . . 183 030-7965 . . . . . . . 183 030-7966 . . . . . . . 183 030-7967 . . . . . . . 183 030-7972 . . . . . . . 183 030-7975 . . . . . . . 183
Part No.
Page No.
030-7976 . . . . . . . 030-7977 . . . . . . . 030-7978 . . . . . . . 030-7979 . . . . . . . 030-7980 . . . . . . . 030-7982 . . . . . . . 030-7983 . . . . . . . 030-7984 . . . . . . . 030-8027 . . . . . . . 030-8110 . . . . . . . 030-8142 . . . . . . . 030-8144 . . . . . . . 030-8145 . . . . . . . 030-8156 . . . . . . . 030-8188 . . . . . . . 030-8189 . . . . . . . 030-8190 . . . . . . . 030-8193 . . . . . . . 030-8194 . . . . . . . 030-8195 . . . . . . . 030-8196 . . . . . . . 030-8276 . . . . . . . 030-8307 . . . . . . . 030-8309 . . . . . . . 030-8310 . . . . . . . 030-8324 . . . . . . . 030-8370 . . . . . . . 031-0782 . . . . . . . 031-0919 . . . . . . . 031-1358 . . . . . . . 031-1864 . . . . . . . 031-2582 . . . . . . . 031-2716 . . . . . . . 031-4136 . . . . . . . 031-4140 . . . . . . . 031-4629 . . . . . . . 031-5744 . . . . . . . 031-5894 . . . . . . . 031-6085 . . . . . . . 031-6281 . . . . . . . 031-6303 . . . . . . . 031-6742 . . . . . . . 031-7600 . . . . . . . 031-8759 . . . . . . . 031-9567 . . . . . . . 031-9746 . . . . . . . 032-1267 . . . . . . . 032-1268 . . . . . . . 032-1269 . . . . . . . 032-1270 . . . . . . . 032-1357 . . . . . . . 032-1416 . . . . . . . 032-1523 . . . . . . . 032-3506 . . . . . . . 032-4872 . . . . . . . 032-8414 . . . . . . . 032-9267 . . . . . . . 033-0414 . . . . . . . 033-0442 . . . . . . .
245 246 246 246 246 182 182 182 190 188 183 184 184 190 188 189 189 188 188 188 189 190 185 185 185 174 172 187 196 187 183 200 196 198 189 186 183 200 190 198 186 187 191 189 190 174 185 186 187 196 187 186 187 172 155 191 190 187 187
Part No.
Page No.
033-2177 . . . . . . . 033-5691 . . . . . . . 033-6031 . . . . . . . 033-6033 . . . . . . . 033-8129 . . . . . . . 033-8734 . . . . . . . 033-9216 . . . . . . . 034-2136 . . . . . . . 035-0656 . . . . . . . 035-0750 . . . . . . . 035-2181 . . . . . . . 035-3386 . . . . . . . 037-9239 . . . . . . . 044-4101 . . . . . . . 052-0572 . . . . . . . 052-0726 . . . . . . . 052-0741 . . . . . . . 053-0088 . . . . . . . 053-0700 . . . . . . . 053-1069 . . . . . . . 053-1788 . . . . . . . 053-2141 . . . . . . . 053-2295 . . . . . . . 053-2928 . . . . . . . 053-3153 . . . . . . . 054-2271 . . . . . . . 054-3921 . . . . . . . 061-6717 . . . . . . . 061-6737 . . . . . . . 061-6739 . . . . . . . 061-6740 . . . . . . . 061-6746 . . . . . . . 061-7538 . . . . . . . 061-7540 . . . . . . . 061-7738 . . . . . . . 061-7921 . . . . . . . 061-8246 . . . . . . . 061-8248 . . . . . . . 061-8257 . . . . . . . 061-8260 . . . . . . . 061-8261 . . . . . . . 061-8268 . . . . . . . 061-8284 . . . . . . . 061-8408 . . . . . . . 061-8827 . . . . . . . 061-8863 . . . . . . . 061-8962 . . . . . . . 061-9185 . . . . . . . 061-9258 . . . . . . . 061-9413 . . . . . . . 061-9455 . . . . . . . 061-9456 . . . . . . . 061-9458 . . . . . . . 061-9463 . . . . . . . 061-9593 . . . . . . . 061-9787 . . . . . . . 067-6495 . . . . . . . 067-6684 . . . . . . . 067-9921 . . . . . . .
179 188 270 270 196 186 196 191 136 185 136 137 137 175 197 179 187 187 199 189 156 155 154 199 182 137 183 187 182 182 182 154 270 269 199 187 187 182 182 199 199 184 199 199 199 156 187 182 197 187 269 269 269 185 173 182 182 184 200
Part No.
Page No.
068-0009 . . . . . . . 068-0554 . . . . . . . 068-0556 . . . . . . . 068-0589 . . . . . . . 068-0599 . . . . . . . 068-0601 . . . . . . . 068-2859 . . . . . . . 068-4152 . . . . . . . 068-4174 . . . . . . . 068-6074 . . . . . . . 068-6078 . . . . . . . 069-0478 . . . . . . . 069-2120 . . . . . . . 069-2306 . . . . . . . 072-9601 . . . . . . . 081-5604 . . . . . . . 081-5622 . . . . . . . 081-5645 . . . . . . . 081-5648 . . . . . . . 085-7356 . . . . . . . 086-2746 . . . . . . . 087-0491 . . . . . . . 087-4566 . . . . . . . 087-4588 . . . . . . . 089-7920 . . . . . . . 090-3000 . . . . . . . 090-3623 . . . . . . . 090-6372 . . . . . . . 092-2304 . . . . . . . 092-3635 . . . . . . . 093-1321 . . . . . . . 093-1322 . . . . . . . 093-1323 . . . . . . . 096-3829 . . . . . . . 096-4919 . . . . . . . 096-4920 . . . . . . . 096-6073 . . . . . . . 096-6223 . . . . . . . 099-6820 . . . . . . . 099-6839 . . . . . . . 099-7551 . . . . . . . 0A-2926 . . . . . . . . 0A-3732 . . . . . . . . 100-7603 . . . . . . . 100-7870 . . . . . . . 101-0052 . . . . . . . 101-0387 . . . . . . . 101-1340 . . . . . . . 101-7198 . . . . . . . 102-0773 . . . . . . . 102-1384 . . . . . . . 102-3437 . . . . . . . 102-6496 . . . . . . . 103-1328 . . . . . . . 103-4675 . . . . . . . 104-8969 . . . . . . . 104-8970 . . . . . . . 104-9054 . . . . . . . 104-9114 . . . . . . .
155 154 155 155 155 154 155 182 191 189 184 136 137 136 184 230 208 223 228 250 235 177 248 212 205 186 138 192 123 209 263 263 263 263 235 236 263 235 235 235 236 172 199 212 248 221 207 238 249 222 227 205 175 205 252 224 223 209 198
369
Part Number Index Part No.
Page No.
104-9200 . . . . . . . 198 104-9223 . . . . . . . 210 104-9224 . . . . . . . 210 105-7704 . . . . . . . 253 106-2105 . . . . . . . 178 106-3401 . . . . . . . 180 107-0496 . . . . . . . 223 107-1341 . . . . . . . 248 107-1658 . . . . . . . 222 107-2627 . . . . . . . 190 107-3877 . . . . . . . 206 107-6631 . . . . . . . 204 107-6709 . . . . . . . 217 107-9343 . . . . . . . 252 108-2197 . . . . . . . 177 108-3872 . . . . . . . 217 108-4371 . . . . . . . 192 108-5678 . . . . . . . 251 108-6639 . . . . . . . 232 108-6671 . . . . . . . 231 108-6672 . . . . . . . 231 108-6718 . . . . . . . 242 108-7005 . . . . . . . 227 108-7185 . . . . . . . 210 108-7251 . . . . . . . 220 108-7264 . . . . . . . 210 108-7453 . . . . . . . 224 108-7507 . . . . . . . 248 108-9418 . . . . . . . 238 109-2953 . . . . . . . 222 109-3656 . . . . . . . 212 109-3657 . . . . . . . 211 109-5169 . . . . . . . 252 109-5289 . . . . . . . 204 109-5605 . . . . . . . 172 109-5811 . . . . . . . 226 109-5812 . . . . . . . 222 109-5819 . . . . . . . 222 109-5821 . . . . . . . 210 109-5822 . . . . . . . 210 109-5823 . . . . . . . 210 109-5824 . . . . . . . 205 109-5825 . . . . . . . 205 109-6511 . . . . . . . 228 109-7075 . . . . . . . 213 109-7596 . . . . . . . 245 109-8314 . . . . . . . 211 109-9866 . . . . . . . 175 110-2218 . . . . . . . 228 110-4628 . . . . . . . 223 110-5895 . . . . . . . 210 110-9160 . . . . . . . 204 111-5562 . . . . . . . 188 111-6522 . . . . . . . 205 111-6690 . . . . . . . 201 111-7659 . . . . . . . . 48 111-7660 . . . . . . . . 49 111-7661 . . . . . . . . 49 111-7662 . . . . . . . . 50
370
Part No.
Page No.
111-7666 . . . . . . . 155 111-8815 . . . . . . . 240 112-2565 . . . . . . . 207 112-4387 . . . . . . . 183 112-9783 . . . . . . . 208 113-2376 . . . . . . . 210 113-2378 . . . . . . . 222 113-2934 . . . . . . . 197 113-4676 . . . . . . . 251 113-7099 . . . . . . . 242 113-7696 . . . . . . . 193 114-3399 . . . . . . . 172 114-8196 . . . . . . . 204 115-1708 . . . . . . . 189 115-8215 . . . . . . . 117 115-8634 . . . . . . . 222 115-8730 . . . . . . . 198 115-9791 . . . . . . . 240 116-0440 . . . . . . . . 98 116-0441 . . . . . . . . 98 116-0442 . . . . . . . . 98 116-0443 . . . . . . . . 98 116-0444 . . . . . . . . 98 116-0445 . . . . . . . . 98 116-0446 . . . . . . . . 98 116-0447 . . . . . . . . 98 116-0448 . . . . . . . . 98 116-0449 . . . . . . . . 98 116-0450 . . . . . . . . 98 116-0451 . . . . . . . . 98 116-0452 . . . . . . . . 98 116-0453 . . . . . . . . 98 116-0454 . . . . . . . . 98 116-0455 . . . . . . . . 99 116-0456 . . . . . . . . 99 116-0457 . . . . . . . . 99 116-0458 . . . . . . . . 99 116-0462 . . . . . . . . 99 116-0463 . . . . . . . . 99 116-0464 . . . . . . . . 99 116-0465 . . . . . . . . 97 116-0466 . . . . . . . . 97 116-0467 . . . . . . . . 97 116-0468 . . . . . . . . 97 116-0469 . . . . . . . . 97 116-0470 . . . . . . . . 97 116-0471 . . . . . . . . 97 116-0472 . . . . . . . . 98 116-0473 . . . . . . . . 91 116-0474 . . . . . . . . 91 116-0475 . . . . . . . . 91 116-0476 . . . . . . . . 91 116-0477 . . . . . . . . 92 116-0478 . . . . . . . . 91 116-0479 . . . . . . . . 91 116-0480 . . . . . . . . 91 116-0481 . . . . . . . . 91 116-0482 . . . . . . . . 91 116-0483 . . . . . . . . 91
Part No.
Page No.
116-0484 . . . . . . . . 91 116-0485 . . . . . . . . 92 116-0486 . . . . . . . . 92 116-0487 . . . . . . . . 92 116-0488 . . . . . . . . 92 116-0489 . . . . . . . . 92 116-0490 . . . . . . . . 92 116-0491 . . . . . . . . 92 116-0492 . . . . . . . . 92 116-0493 . . . . . . . . 92 116-0494 . . . . . . . . 92 116-0495 . . . . . . . . 92 116-0496 . . . . . . . . 92 116-0497 . . . . . . . . 92 116-0498 . . . . . . . . 91 116-0499 . . . . . . . . 91 116-0500 . . . . . . . . 91 116-0501 . . . . . . . . 91 116-0502 . . . . . . . . 91 116-0503 . . . . . . . . 91 116-0504 . . . . . . . . 91 116-0505 . . . . . . . 100 116-0506 . . . . . . . 100 116-0507 . . . . . . . 100 116-0508 . . . . . . . 100 116-0509 . . . . . . . 100 116-0510 . . . . . . . 100 116-0511 . . . . . . . 100 116-0512 . . . . . . . 100 116-0513 . . . . . . . 100 116-0514 . . . . . . . 100 116-0515 . . . . . . . 100 116-0516 . . . . . . . 100 116-0517 . . . . . . . 100 116-0518 . . . . . . . 100 116-0519 . . . . . . . 100 116-0520 . . . . . . . 100 116-0521 . . . . . . . 100 116-0522 . . . . . . . 100 116-0523 . . . . . . . . 99 116-0524 . . . . . . . . 99 116-0525 . . . . . . . . 99 116-0527 . . . . . . . . 99 116-0528 . . . . . . . . 99 116-0530 . . . . . . . . 99 116-0531 . . . . . . . . 92 116-0532 . . . . . . . . 92 116-0533 . . . . . . . . 92 116-0534 . . . . . . . . 92 116-0535 . . . . . . . . 92 116-0536 . . . . . . . . 92 116-0538 . . . . . . . . 92 116-0539 . . . . . . . . 93 116-0541 . . . . . . . . 93 116-0543 . . . . . . . . 93 116-0544 . . . . . . . . 93 116-0545 . . . . . . . . 93 116-0547 . . . . . . . . 93 116-0548 . . . . . . . . 93
Part No.
Page No.
116-0550 . . . . . . . . 116-0551 . . . . . . . . 116-0552 . . . . . . . . 116-0554 . . . . . . . . 116-0555 . . . . . . . . 116-0557 . . . . . . . . 116-0558 . . . . . . . . 116-0559 . . . . . . . . 116-0561 . . . . . . . . 116-0562 . . . . . . . . 116-0563 . . . . . . . . 116-0565 . . . . . . . . 116-0566 . . . . . . . . 116-0568 . . . . . . . . 116-0570 . . . . . . . . 116-0571 . . . . . . . . 116-0572 . . . . . . . . 116-0575 . . . . . . . . 116-0576 . . . . . . . . 116-0577 . . . . . . . . 116-0578 . . . . . . . . 116-0579 . . . . . . . . 116-0580 . . . . . . . . 116-0581 . . . . . . . . 116-0582 . . . . . . . . 116-0583 . . . . . . . . 116-0584 . . . . . . . . 116-0585 . . . . . . . . 116-0586 . . . . . . . . 116-0587 . . . . . . . . 116-0588 . . . . . . . . 116-0589 . . . . . . . . 116-0590 . . . . . . . . 116-0591 . . . . . . . . 116-0592 . . . . . . . . 116-0593 . . . . . . . . 116-0594 . . . . . . . . 116-0595 . . . . . . . . 116-0596 . . . . . . . . 116-0597 . . . . . . . . 116-0598 . . . . . . . . 116-0599 . . . . . . . . 116-0600 . . . . . . . . 116-0601 . . . . . . . . 116-0602 . . . . . . . . 116-0603 . . . . . . . . 116-0604 . . . . . . . . 116-0605 . . . . . . . . 116-0606 . . . . . . . . 116-0607 . . . . . . . . 116-0608 . . . . . . . . 116-0609 . . . . . . . . 116-0610 . . . . . . . . 116-0611 . . . . . . . . 116-0612 . . . . . . . . 116-0613 . . . . . . . . 116-0614 . . . . . . . . 116-0615 . . . . . . . . 116-0616 . . . . . . . .
94 94 94 94 94 94 94 94 94 92 94 94 94 94 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 95 96 96 96 96 96 91 91 91 91 91 91 91 91 96 96 96 96
Part No.
Page No.
116-0617 . . . . . . . . 96 116-0618 . . . . . . . . 96 116-0619 . . . . . . . . 96 116-0620 . . . . . . . . 96 116-0621 . . . . . . . . 97 116-0622 . . . . . . . . 97 116-0623 . . . . . . . . 97 116-0624 . . . . . . . . 97 116-0625 . . . . . . . . 97 116-0626 . . . . . . . . 97 116-0627 . . . . . . . . 97 116-0628 . . . . . . . . 97 116-0629 . . . . . . . . 97 116-0630 . . . . . . . . 97 116-0631 . . . . . . . . 97 116-0632 . . . . . . . . 97 116-0633 . . . . . . . . 97 116-0635 . . . . . . . . 95 116-0636 . . . . . . . . 97 116-0637 . . . . . . . . 96 116-0638 . . . . . . . . 99 116-0640 . . . . . . . . 99 116-0641 . . . . . . . . 99 116-0642 . . . . . . . . 99 116-0643 . . . . . . . . 99 116-0645 . . . . . . . . 99 116-1859 . . . . . . . 218 116-6796 . . . . . . . . 90 116-6797 . . . . . . . . 90 116-6798 . . . . . . . . 90 116-6799 . . . . . . . . 90 116-6800 . . . . . . . . 90 116-6801 . . . . . . . . 90 116-6802 . . . . . . . . 90 116-6804 . . . . . . . . 90 117-0067 . . . . . . . 251 117-0473 . . . . . . . 248 117-1266 . . . . . . . 115, 116,117 117-3033 . . . . . . . 208 117-3034 . . . . . . . 207 117-3050 . . . . . . . 207 117-5207 . . . . . . . 226 117-5208 . . . . . . . 229 117-7274 . . . . . . . 221 117-7734 . . . . . . . 228 117-8032 . . . . . . . 240 118-0280 . . . . . . . 185 118-4569 . . . . . . . 222 119-0572 . . . . . . . 178 119-2604 . . . . . . . 198 119-6220 . . . . . . . 213 119-6228 . . . . . . . 162 119-6346 . . . . . . . 222 119-6407 . . . . . . . 236 119-6729 . . . . . . . . 47 119-6730 . . . . . . . . 53 119-8096 . . . . . . . 188 120-6726 . . . . . . . 252
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
120-7391 . . . . . . . 174 120-8401 . . . . . . . 201 121-5729 . . . . . . . 186 121-6268 . . . . . . . 224 121-7136 . . . . . . . 275 121-7137 . . . . . . . 275 121-7138 . . . . . . . 275 121-7697 . . . . . . . 221 121-9267 . . . . . . . 198 122-0020 . . . . . . . 209 122-0957 . . . . . . . 249 122-1852 . . . . 229,253 122-6867 . . . . . . . 104 122-6869 . . . . . . . 104 122-6870 . . . . . . . 104 122-6871 . . . . . . . 104 122-6872 . . . . . . . 104 122-6873 . . . . . . . 104 122-6874 . . . . . . . 104 122-6875 . . . . . . . 104 122-6876 . . . . . . . 104 122-6887 . . . . . . . 105 122-6888 . . . . . . . 105 122-6889 . . . . . . . 105 122-6890 . . . . . . . 105 122-6891 . . . . . . . 105 122-6892 . . . . . . . 105 122-6893 . . . . . . . 105 122-6894 . . . . . . . 105 122-6895 . . . . . . . 105 122-6905 . . . . . . . 106 122-6906 . . . . . . . 106 122-6907 . . . . . . . 106 122-6908 . . . . . . . 106 122-6909 . . . . . . . 106 122-6910 . . . . . . . 106 122-6911 . . . . . . . 106 122-6912 . . . . . . . 106 122-8905 . . . . . . . 208 122-9088 . . . . . . . 222 122-9415 . . . . . . . 208 123-1904 . . . . . . . 209 123-2342 . . . . . . . 163 123-5234 . . . . . . . . 80 123-5235 . . . . . . . . 80 123-5236 . . . . . . . . 82 123-5237 . . . . . . . . 81 123-5238 . . . . . . . . 80 123-5239 . . . . . . . . 81 123-5240 . . . . . . . . 81 123-5934 . . . . . . . 207 123-7341 . . . . . . . 236 123-8579 . . . . . . . 188 123-8580 . . . . . . . 186 123-8828 . . . . . . . 236 123-8829 . . . . . . . 237 124-0195 . . . . . . . 216 124-1212 . . . . . . . 223 124-1890 . . . . . . . 107
2006-02-28 16:22:25.0
Part No.
Page No.
124-1891 . . . . . . . 124-1892 . . . . . . . 124-1894 . . . . . . . 124-1895 . . . . . . . 124-1896 . . . . . . . 124-1897 . . . . . . . 124-1898 . . . . . . . 124-1899 . . . . . . . 124-1900 . . . . . . . 124-1901 . . . . . . . 124-1902 . . . . . . . 124-1903 . . . . . . . 124-1904 . . . . . . . 124-1905 . . . . . . . 124-1906 . . . . . . . 124-1907 . . . . . . . 124-1908 . . . . . . . 124-1909 . . . . . . . 124-1910 . . . . . . . 124-1911 . . . . . . . 124-1912 . . . . . . . 124-1913 . . . . . . . 124-1914 . . . . . . . 124-1915 . . . . . . . 124-1916 . . . . . . . 124-1917 . . . . . . . 124-1918 . . . . . . . 124-1919 . . . . . . . 124-1920 . . . . . . . 124-1921 . . . . . . . 124-1922 . . . . . . . 124-1923 . . . . . . . 124-1924 . . . . . . . 124-1925 . . . . . . . 124-1926 . . . . . . . 124-1927 . . . . . . . 124-1928 . . . . . . . 124-1929 . . . . . . . 124-1930 . . . . . . . 124-1931 . . . . . . . 124-1932 . . . . . . . 124-1933 . . . . . . . 124-1934 . . . . . . . 124-1935 . . . . . . . 124-1936 . . . . . . . 124-1937 . . . . . . . 124-1938 . . . . . . . 124-1939 . . . . . . . 124-1940 . . . . . . . 124-1941 . . . . . . . 124-1942 . . . . . . . 124-1943 . . . . . . . 124-1944 . . . . . . . 124-1945 . . . . . . . 124-1946 . . . . . . . 124-1947 . . . . . . . 124-1948 . . . . . . . 124-1949 . . . . . . . 124-1950 . . . . . . .
107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 108 108 108 108 108 108 108 108 108 108 109 109 109 109 109 109 109 109 109 109 109 109 110 110 110 110 110 110
Part No.
Page No.
124-1951 . . . . . . . 124-1952 . . . . . . . 124-1953 . . . . . . . 124-1954 . . . . . . . 124-1955 . . . . . . . 124-1956 . . . . . . . 124-1957 . . . . . . . 124-1958 . . . . . . . 124-1959 . . . . . . . 124-1960 . . . . . . . 124-1961 . . . . . . . 124-1962 . . . . . . . 124-1963 . . . . . . . 124-1964 . . . . . . . 124-1965 . . . . . . . 124-1966 . . . . . . . 124-1967 . . . . . . . 124-1968 . . . . . . . 124-1969 . . . . . . . 124-1970 . . . . . . . 124-1971 . . . . . . . 124-1972 . . . . . . . 124-1973 . . . . . . . 124-1974 . . . . . . . 124-1975 . . . . . . . 124-1976 . . . . . . . 124-1977 . . . . . . . 124-1978 . . . . . . . 124-1979 . . . . . . . 124-1980 . . . . . . . 124-1981 . . . . . . . 124-1982 . . . . . . . 124-1983 . . . . . . . 124-1984 . . . . . . . 124-1985 . . . . . . . 124-1986 . . . . . . . 124-1987 . . . . . . . 124-1988 . . . . . . . 124-1989 . . . . . . . 124-1990 . . . . . . . 124-1991 . . . . . . . 124-1992 . . . . . . . 124-1993 . . . . . . . 124-1994 . . . . . . . 124-1995 . . . . . . . 124-1996 . . . . . . . 124-1997 . . . . . . . 124-1998 . . . . . . . 124-1999 . . . . . . . 124-2000 . . . . . . . 124-2001 . . . . . . . 124-2002 . . . . . . . 124-2003 . . . . . . . 124-2004 . . . . . . . 124-2005 . . . . . . . 124-2006 . . . . . . . 124-2007 . . . . . . . 124-2008 . . . . . . . 124-2009 . . . . . . .
110 110 110 110 110 110 110 108 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 112 112 112
Part No.
Page No.
124-2010 . . . . . . . 124-2011 . . . . . . . 124-2012 . . . . . . . 124-2013 . . . . . . . 124-2014 . . . . . . . 124-2015 . . . . . . . 124-2016 . . . . . . . 124-2017 . . . . . . . 124-2018 . . . . . . . 124-2019 . . . . . . . 124-2020 . . . . . . . 124-2021 . . . . . . . 124-2022 . . . . . . . 124-2023 . . . . . . . 124-2024 . . . . . . . 124-2025 . . . . . . . 124-2026 . . . . . . . 124-2027 . . . . . . . 124-2028 . . . . . . . 124-2029 . . . . . . . 124-2030 . . . . . . . 124-2031 . . . . . . . 124-2032 . . . . . . . 124-2033 . . . . . . . 124-2034 . . . . . . . 124-2035 . . . . . . . 124-2036 . . . . . . . 124-2037 . . . . . . . 124-2038 . . . . . . . 124-2039 . . . . . . . 124-2040 . . . . . . . 124-2041 . . . . . . . 124-2042 . . . . . . . 124-2043 . . . . . . . 124-2044 . . . . . . . 124-2045 . . . . . . . 124-2046 . . . . . . . 124-2047 . . . . . . . 124-2048 . . . . . . . 124-2049 . . . . . . . 124-2050 . . . . . . . 124-2051 . . . . . . . 124-2052 . . . . . . . 124-2053 . . . . . . . 124-2054 . . . . . . . 124-2055 . . . . . . . 124-2056 . . . . . . . 124-2057 . . . . . . . 124-2058 . . . . . . . 124-2059 . . . . . . . 124-2060 . . . . . . . 124-2061 . . . . . . . 124-2062 . . . . . . . 124-2063 . . . . . . . 124-2064 . . . . . . . 124-2065 . . . . . . . 124-2066 . . . . . . . 124-2067 . . . . . . . 124-2068 . . . . . . .
112 112 112 112 112 111 111 111 111 112 112 112 112 112 112 111 111 111 111 111 112 112 112 112 112 112 112 113 113 113 113 113 113 113 113 113 113 113 113 113 114 114 114 114 114 114 114 114 114 114 114 114 115 115 115 115 115 115 115
Part No.
Page No.
124-2069 . . . . . . . 124-2070 . . . . . . . 124-2071 . . . . . . . 124-2072 . . . . . . . 124-2073 . . . . . . . 124-2074 . . . . . . . 124-2075 . . . . . . . 124-2076 . . . . . . . 124-2077 . . . . . . . 124-2078 . . . . . . . 124-2079 . . . . . . . 124-2080 . . . . . . . 124-2081 . . . . . . . 124-2082 . . . . . . . 124-2083 . . . . . . . 124-2084 . . . . . . . 124-2085 . . . . . . . 124-2086 . . . . . . . 124-2087 . . . . . . . 124-2088 . . . . . . . 124-2089 . . . . . . . 124-2090 . . . . . . . 124-2091 . . . . . . . 124-2092 . . . . . . . 124-2093 . . . . . . . 124-2094 . . . . . . . 124-2095 . . . . . . . 124-2096 . . . . . . . 124-2097 . . . . . . . 124-2098 . . . . . . . 124-2099 . . . . . . . 124-2100 . . . . . . . 124-2101 . . . . . . . 124-2102 . . . . . . . 124-2103 . . . . . . . 124-2104 . . . . . . . 124-2105 . . . . . . . 124-2106 . . . . . . . 124-2107 . . . . . . . 124-2108 . . . . . . . 124-2109 . . . . . . . 124-2110 . . . . . . . 124-2111 . . . . . . . 124-2113 . . . . . . . 124-2114 . . . . . . . 124-2116 . . . . . . . 124-2117 . . . . . . . 124-2118 . . . . . . . 124-2119 . . . . . . . 124-2120 . . . . . . . 124-2121 . . . . . . . 124-2122 . . . . . . . 124-2123 . . . . . . . 124-2124 . . . . . . . 124-2125 . . . . . . . 124-2127 . . . . . . . 124-2128 . . . . . . . 124-2129 . . . . . . . 124-2130 . . . . . . .
115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 115 116 116 116 116 116 116 116 116 116 116 116 116 116 117 117 117 117 117 117 117 117 117 117 117 117 117 118 118 118 118 118 118 119 119 119 119 119 119 119 119 119 119 119
371
Part Number Index Part No.
Page No.
124-2131 . . . . . . . 124-2132 . . . . . . . 124-2133 . . . . . . . 124-2134 . . . . . . . 124-2135 . . . . . . . 124-2136 . . . . . . . 124-2137 . . . . . . . 124-2138 . . . . . . . 124-2139 . . . . . . . 124-2140 . . . . . . . 124-2141 . . . . . . . 124-2142 . . . . . . . 124-2143 . . . . . . . 124-2144 . . . . . . . 124-2145 . . . . . . . 124-2146 . . . . . . . 124-2147 . . . . . . . 124-2148 . . . . . . . 124-2149 . . . . . . . 124-2150 . . . . . . . 124-2151 . . . . . . . 124-2152 . . . . . . . 124-2153 . . . . . . . 124-2154 . . . . . . . 124-2155 . . . . . . . 124-2156 . . . . . . . 124-2157 . . . . . . . 124-2158 . . . . . . . 124-2159 . . . . . . . 124-2160 . . . . . . . 124-2161 . . . . . . . 124-2162 . . . . . . . 124-2163 . . . . . . . 124-2164 . . . . . . . 124-2165 . . . . . . . 124-2166 . . . . . . . 124-2167 . . . . . . . 124-2168 . . . . . . . 124-2170 . . . . . . . 124-2171 . . . . . . . 124-2172 . . . . . . . 124-2173 . . . . . . . 124-2174 . . . . . . . 124-2175 . . . . . . . 124-2176 . . . . . . . 124-2177 . . . . . . . 124-2178 . . . . . . . 124-2180 . . . . . . . 124-2181 . . . . . . . 124-2182 . . . . . . . 124-2183 . . . . . . . 124-2184 . . . . . . . 124-2185 . . . . . . . 124-2186 . . . . . . . 124-2187 . . . . . . . 124-2188 . . . . . . . 124-2189 . . . . . . . 124-2190 . . . . . . . 124-2192 . . . . . . .
372
119 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 120 121 121 120 120 120 120 120 120 120 120 121 121 120 117 111 126 126 126 126 122 122 122 122 122 122 122 122 122 122 122 121 121 121 121
Part No.
Page No.
124-2193 . . . . . . . 124-2194 . . . . . . . 124-2195 . . . . . . . 124-2196 . . . . . . . 124-2197 . . . . . . . 124-2198 . . . . . . . 124-2199 . . . . . . . 124-2200 . . . . . . . 124-2202 . . . . . . . 124-2204 . . . . . . . 124-2205 . . . . . . . 124-2207 . . . . . . . 124-2208 . . . . . . . 124-2209 . . . . . . . 124-2210 . . . . . . . 124-2211 . . . . . . . 124-2212 . . . . . . . 124-2213 . . . . . . . 124-2214 . . . . . . . 124-2215 . . . . . . . 124-2216 . . . . . . . 124-2217 . . . . . . . 124-2218 . . . . . . . 124-2219 . . . . . . . 124-2220 . . . . . . . 124-2222 . . . . . . . 124-2223 . . . . . . . 124-2224 . . . . . . . 124-2225 . . . . . . . 124-2226 . . . . . . . 124-2227 . . . . . . . 124-2228 . . . . . . . 124-2229 . . . . . . . 124-2230 . . . . . . . 124-2232 . . . . . . . 124-2233 . . . . . . . 124-2234 . . . . . . . 124-2235 . . . . . . . 124-2236 . . . . . . . 124-2237 . . . . . . . 124-2238 . . . . . . . 124-2239 . . . . . . . 124-2240 . . . . . . . 124-2241 . . . . . . . 124-2242 . . . . . . . 124-2243 . . . . . . . 124-2244 . . . . . . . 124-2245 . . . . . . . 124-2246 . . . . . . . 124-2247 . . . . . . . 124-2248 . . . . . . . 124-2249 . . . . . . . 124-2250 . . . . . . . 124-2251 . . . . . . . 124-2252 . . . . . . . 124-2253 . . . . . . . 124-2254 . . . . . . . 124-2255 . . . . . . . 124-2256 . . . . . . .
121 121 121 121 121 121 121 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 122 123 123 123 123 123 123 123 123 123 123 123 123 123 123 123 123 123 123 123 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124
Part No.
Page No.
124-2257 . . . . . . . 124-2258 . . . . . . . 124-2259 . . . . . . . 124-2260 . . . . . . . 124-2261 . . . . . . . 124-2262 . . . . . . . 124-2263 . . . . . . . 124-2264 . . . . . . . 124-2265 . . . . . . . 124-2266 . . . . . . . 124-2267 . . . . . . . 124-2268 . . . . . . . 124-2269 . . . . . . . 124-2270 . . . . . . . 124-2271 . . . . . . . 124-2272 . . . . . . . 124-2273 . . . . . . . 124-2274 . . . . . . . 124-2275 . . . . . . . 124-2276 . . . . . . . 124-2277 . . . . . . . 124-2278 . . . . . . . 124-2279 . . . . . . . 124-2280 . . . . . . . 124-2281 . . . . . . . 124-2282 . . . . . . . 124-2283 . . . . . . . 124-2284 . . . . . . . 124-2285 . . . . . . . 124-2286 . . . . . . . 124-2287 . . . . . . . 124-2288 . . . . . . . 124-2289 . . . . . . . 124-2290 . . . . . . . 124-2291 . . . . . . . 124-2292 . . . . . . . 124-2293 . . . . . . . 124-2294 . . . . . . . 124-2295 . . . . . . . 124-2296 . . . . . . . 124-2297 . . . . . . . 124-2298 . . . . . . . 124-2299 . . . . . . . 124-2300 . . . . . . . 124-2301 . . . . . . . 124-2302 . . . . . . . 124-2303 . . . . . . . 124-2304 . . . . . . . 124-2305 . . . . . . . 124-2306 . . . . . . . 124-2307 . . . . . . . 124-2308 . . . . . . . 124-2309 . . . . . . . 124-2310 . . . . . . . 124-2311 . . . . . . . 124-2312 . . . . . . . 124-2313 . . . . . . . 124-2314 . . . . . . . 124-2315 . . . . . . .
124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 127 128 128 128 128
Part No.
Page No.
124-2316 . . . . . . . 128 124-2317 . . . . . . . 128 124-2318 . . . . . . . 128 124-2319 . . . . . . . 128 124-2320 . . . . . . . 119 124-2321 . . . . . . . 126 124-2322 . . . . . . . 120 124-2323 . . . . . . . 120 124-2324 . . . . . . . 128 124-2325 . . . . . . . 120 124-2326 . . . . . . . 128 124-2327 . . . . . . . 128 124-2328 . . . . . . . . 55 124-2330 . . . . . . . 126 124-2336 . . . . . . . 110 124-2337 . . . . . . . 127 124-2340 . . . . . . . 164 124-4286 . . . . . . . 280 124-4287 . . . . . . . 280 124-4288 . . . . . . . 280 124-4289 . . . . . . . 280 124-4499 . . . . . . . 212 124-6105 . . . . . . . 221 124-7115 . . . . . . . 105 124-7337 . . . . . . . 163 124-7338 . . . . . . . 163 124-8909 . . . . . . . 250 125-0051 . . . . . . . 238 125-0998 . . . . . . . 161 125-1836 . . . . . . . 210 125-1915 . . . . . . . 210 125-2797 . . . . . . . 165 125-4085 . . . . . . . 241 125-4286 . . . . . . . 212 125-5159 . . . . . . . 223 125-7234 . . . . . . . 210 125-7425 . . . . . . . 210 125-7426 . . . . . . . 210 126-3902 . . . . . . . 222 126-6872 . . . . . . . 223 126-8306 . . . . . . . 228 126-9745 . . . . . . . 209 126-9746 . . . . . . . 198 126-9903 . . . . . . . 209 127-1647 . . . . . . . 211 127-2141 . . . . . . . 227 127-3026 . . . . . . . 227 127-5494 . . . . . . . 213 127-5588 . . . . . . . 175 127-9015 . . . . . . . 219 127-9258 . . . . . . . 209 128-6085 . . . . . . . 208 128-6841 . . . . . . . 213 128-6842 . . . . . . . 210 128-7625 . . . . . . . 222 129-7420 . . . . . . . 114 129-7474 . . . . . . . 116 129-7475 . . . . . . . 116 129-7487 . . . . . . . 117
Part No.
Page No.
130-6336 . . . . . . . 237 131-0749 . . . . . . . 209 131-4863 . . . . . . . 208 131-5681 . . . . . . . 249 131-9366 . . . . . . . 177 132-2453 . . . . . . . 218 132-3134 . . . . . . . 187 132-5091 . . . . . . . 217 132-5152 . . . . . . . 224 132-6829 . . . . . . . 209 132-8815 . . . . . . . 210 133-8724 . . . . . . . 162 133-8726 . . . . . . . 162 134-6953 . . . . . . . 222 134-6954 . . . . . . . 227 134-6962 . . . . . . . 211 135-2755 . . . . . . . 220 135-5985 . . . . . . . 225 135-7853 . . . . . . . 142 135-7854 . . . . . . . 142 135-7855 . . . . . . . 142 135-7856 . . . . . . . 142 136-0853 . . . . . . . 248 136-1901 . . . . . . . 209 136-1902 . . . . . . . 209 136-2802 . . . . . . . 185 136-4097 . . . . . . . 235 136-4098 . . . . . . . 235 136-6811 . . . . . . . 212 136-8543 . . . . . . . 236 137-0868 . . . . . . . 192 137-0869 . . . . . . . 193 137-5614 . . . . . . . 188 137-9077 . . . . . . . 205 137-9145 . . . . . . . 188 138-1916 . . . . . . . 223 138-5049 . . . . . . . 190 138-7538 . . . . . . . 210 139-1485 . . . . . . . 165 139-1802 . . . . . . . 221 139-4180 . . . . . . . . 50 139-6013 . . . . . . . 237 140-5866 . . . . . . . 185 140-5979 . . . . . . . 177 140-5980 . . . . . . . 180 140-9768 . . . . . . . 194 141-0893 . . . . . . . 165 141-2375 . . . . . . . 190 141-4735 . . . . . . . 213 141-7251 . . . . . . . 209 142-0038 . . . . . . . 204 142-2616 . . . . . . . 164 142-4894 . . . . . . . 236 142-5137 . . . . . . . . 64 142-7620 . . . . . . . 253 142-9219 . . . . . . . 208 143-4281 . . . . . . . 212 143-7681 . . . . . . . 226 143-7685 . . . . . . . 208
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
143-8327 . . . . . . . 143-9199 . . . . . . . 143-9665 . . . . . . . 144-0858 . . . . . . . 144-3054 . . . . . . . 144-5610 . . . . . . . 144-7767 . . . . . . . 144-8070 . . . . . . . 145-2237 . . . . . . . 145-5843 . . . . . . . 145-6143 . . . . . . . 145-8833 . . . . . . . 146-0763 . . . . . . . 146-3338 . . . . . . . 146-3339 . . . . . . . 146-3340 . . . . . . . 146-3341 . . . . . . . 146-3342 . . . . . . . 146-3343 . . . . . . . 146-3344 . . . . . . . 146-3345 . . . . . . . 146-3346 . . . . . . . 146-3347 . . . . . . . 146-3348 . . . . . . . 146-3349 . . . . . . . 146-3350 . . . . . . . 146-3351 . . . . . . . 146-3352 . . . . . . . 146-3353 . . . . . . . 146-3354 . . . . . . . 146-3355 . . . . . . . 146-3356 . . . . . . . 146-3357 . . . . . . . 146-3358 . . . . . . . 146-3359 . . . . . . . 146-3360 . . . . . . . 146-3361 . . . . . . . 146-3362 . . . . . . . 146-3363 . . . . . . . 146-3364 . . . . . . . 146-3365 . . . . . . . 146-3366 . . . . . . . 146-3367 . . . . . . . 146-3368 . . . . . . . 146-3369 . . . . . . . 146-3370 . . . . . . . 146-3371 . . . . . . . 146-3372 . . . . . . . 146-3373 . . . . . . . 146-3374 . . . . . . . 146-3375 . . . . . . . 146-3376 . . . . . . . 146-3377 . . . . . . . 146-3378 . . . . . . . 146-3379 . . . . . . . 146-3380 . . . . . . . 146-3381 . . . . . . . 146-3382 . . . . . . . 146-3383 . . . . . . .
222 185 216 177 237 185 210 240 208 237 216 194 185 147 147 147 147 147 147 147 147 147 147 147 147 147 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 148 144 144 144 144 144 144 144 144 144 144 145 145 145 145 145 145 145
2006-02-28 16:22:25.0
Part No.
Page No.
146-3384 . . . . . . . 146-3385 . . . . . . . 146-3386 . . . . . . . 146-3387 . . . . . . . 146-3388 . . . . . . . 146-3389 . . . . . . . 146-3390 . . . . . . . 146-3391 . . . . . . . 146-3392 . . . . . . . 146-3393 . . . . . . . 146-3394 . . . . . . . 146-3395 . . . . . . . 146-3396 . . . . . . . 146-3397 . . . . . . . 146-3398 . . . . . . . 146-3399 . . . . . . . 146-3400 . . . . . . . 146-3401 . . . . . . . 146-3402 . . . . . . . 146-3403 . . . . . . . 146-3404 . . . . . . . 146-3405 . . . . . . . 146-3406 . . . . . . . 146-3407 . . . . . . . 146-3408 . . . . . . . 146-3409 . . . . . . . 146-3410 . . . . . . . 146-3411 . . . . . . . 146-3412 . . . . . . . 146-3413 . . . . . . . 146-3414 . . . . . . . 146-3415 . . . . . . . 146-3416 . . . . . . . 146-3417 . . . . . . . 146-3418 . . . . . . . 146-3419 . . . . . . . 146-3420 . . . . . . . 146-3421 . . . . . . . 146-3422 . . . . . . . 146-3423 . . . . . . . 146-3424 . . . . . . . 146-3426 . . . . . . . 146-3427 . . . . . . . 146-3428 . . . . . . . 146-3429 . . . . . . . 146-3430 . . . . . . . 146-3431 . . . . . . . 146-3432 . . . . . . . 146-3433 . . . . . . . 146-3434 . . . . . . . 146-3435 . . . . . . . 146-3436 . . . . . . . 146-3437 . . . . . . . 146-3438 . . . . . . . 146-3439 . . . . . . . 146-3440 . . . . . . . 146-3441 . . . . . . . 146-3442 . . . . . . . 146-3443 . . . . . . .
145 145 145 145 145 145 145 145 145 145 145 145 145 147 145 146 144 144 144 144 143 143 143 143 143 143 143 143 143 143 143 143 143 143 145 143 143 143 143 143 143 144 147 146 146 146 146 146 146 146 146 148 148 148 148 149 149 149 149
Part No.
Page No.
146-3444 . . . . . . . 146 146-3445 . . . . . . . 146 146-3446 . . . . . . . 147 146-3447 . . . . . . . 144 146-3448 . . . . . . . 144 146-3449 . . . . . . . 144 146-3450 . . . . . . . 144 146-7117 . . . . . . . 196 146-8531 . . . . . . . . 74 146-8533 . . . . . . . . 74 146-8535 . . . . . . . . 75 146-9571 . . . . . . . 226 147-0962 . . . . . . . 236 147-1694 . . . . . . . 120 147-1695 . . . . . . . 121 147-1696 . . . . . . . 120 147-1698 . . . . . . . 108 147-1699 . . . . . . . 108 147-1700 . . . . . . . 109 147-1701 . . . . . . . 109 147-1702 . . . . . . . 109 147-1703 . . . . . . . 109 147-1706 . . . . . . . 112 147-1707 . . . . . . . 112 147-1708 . . . . . . . 112 147-1710 . . . . . . . 113 147-1711 . . . . . . . 113 147-1712 . . . . . . . 113 147-1713 . . . . . . . 113 147-1714 . . . . . . . 115 147-1715 . . . . . . . 115 147-1716 . . . . . . . 118 147-1717 . . . . . . . 115 147-1718 . . . . . . . 118 147-1719 . . . . . . . 108 147-1720 . . . . . . . 109 147-2027 . . . . . . . . 63 147-7328 . . . . . . . . 62 148-1740 . . . . . . . 183 148-6757 . . . . . . . 222 149-1301 . . . . . . . 209 149-3188 . . . . . . . 183 149-4230 . . . . . . . 191 149-4289 . . . . . . . 225 149-8475 . . . . . . . 137 149-8477 . . . . . . . 137 149-8486 . . . . . . . 138 149-8496 . . . . . . . 138 149-8502 . . . . . . . 138 149-8510 . . . . . . . 138 149-8511 . . . . . . . 138 149-8520 . . . . . . . 136 149-8521 . . . . . . . 136 149-8522 . . . . . . . 136 149-8523 . . . . . . . 136 149-8524 . . . . . . . 136 149-8533 . . . . . . . 136 149-8534 . . . . . . . 136 149-8538 . . . . . . . 136
Part No.
Page No.
149-8541 . . . . . . . 137 149-8546 . . . . . . . 137 149-8554 . . . . . . . 137 149-8556 . . . . . . . 135 149-8557 . . . . . . . 135 149-8567 . . . . . . . 135 149-8568 . . . . . . . 135 149-8569 . . . . . . . 135 149-8570 . . . . . . . 135 149-8571 . . . . . . . 135 149-8576 . . . . . . . 137 149-9900 . . . . . . . 212 150-0128 . . . . . . . 215 150-1545 . . . . . . . 190 150-7158 . . . . . . . 207 150-7159 . . . . . . . 207 150-7999 . . . . . . . . 82 150-9382 . . . . . . . . 82 151-5834 . . . . . . . 238 152-0199 . . . . . . . 207 152-3411 . . . . . . . 205 152-6942 . . . . . . . 217 152-9349 . . . . . . . 209 152-9840 . . . . . . . 212 152-9841 . . . . . . . 187 152-9842 . . . . . . . 176 152-9843 . . . . . . . 177 153-0785 . . . . . . . . 39 153-0786 . . . . . . . . 40 153-0787 . . . . . . . . 40 153-0788 . . . . . . . . 40 153-0789 . . . . . . . . 39 153-0790 . . . . . . . . 40 153-0791 . . . . . . . . 40 153-0792 . . . . . . . . 40 153-0793 . . . . . . . . 37 153-0794 . . . . . . . . 32 153-0795 . . . . . . . . 32 153-0796 . . . . . . . . 38 153-0797 . . . . . . . . 33 153-0798 . . . . . . . . 38 153-0799 . . . . . . . . 33 153-0800 . . . . . . . . 38 153-0801 . . . . . . . . 33 153-0802 . . . . . . . . 34 153-0803 . . . . . . . . 39 153-0804 . . . . . . . . 34 153-0805 . . . . . . . . 39 153-0806 . . . . . . . . 34 153-0807 . . . . . . . . 37 153-0808 . . . . . . . . 32 153-0809 . . . . . . . . 32 153-0810 . . . . . . . . 38 153-0811 . . . . . . . . 33 153-0812 . . . . . . . . 38 153-0813 . . . . . . . . 33 153-0814 . . . . . . . . 38 153-0815 . . . . . . . . 33 153-0816 . . . . . . . . 34
Part No.
Page No.
153-0817 . . . . . . . . 153-0818 . . . . . . . . 153-0819 . . . . . . . . 153-0820 . . . . . . . . 153-0821 . . . . . . . . 153-0822 . . . . . . . . 153-0823 . . . . . . . . 153-0824 . . . . . . . . 153-0825 . . . . . . . . 153-0826 . . . . . . . . 153-0827 . . . . . . . . 153-0828 . . . . . . . . 153-0829 . . . . . . . . 153-0830 . . . . . . . . 153-0831 . . . . . . . . 153-0832 . . . . . . . . 153-0833 . . . . . . . . 153-0834 . . . . . . . . 153-0835 . . . . . . . . 153-0836 . . . . . . . . 153-0837 . . . . . . . . 153-0838 . . . . . . . . 153-0841 . . . . . . . . 153-0842 . . . . . . . . 153-0843 . . . . . . . . 153-0844 . . . . . . . . 153-0845 . . . . . . . . 153-0846 . . . . . . . . 153-0847 . . . . . . . . 153-0848 . . . . . . . . 153-0849 . . . . . . . . 153-0850 . . . . . . . . 153-0851 . . . . . . . . 153-0852 . . . . . . . . 153-0853 . . . . . . . . 153-0854 . . . . . . . . 153-0855 . . . . . . . . 153-0856 . . . . . . . . 153-0857 . . . . . . . . 153-0858 . . . . . . . . 153-0859 . . . . . . . . 153-0860 . . . . . . . . 153-0861 . . . . . . . . 153-0862 . . . . . . . . 153-0863 . . . . . . . . 153-0864 . . . . . . . . 153-0865 . . . . . . . . 153-0866 . . . . . . . . 153-0867 . . . . . . . . 153-0868 . . . . . . . . 153-0869 . . . . . . . . 153-0870 . . . . . . . . 153-0871 . . . . . . . . 153-0872 . . . . . . . . 153-0873 . . . . . . . . 153-0874 . . . . . . . . 153-0875 . . . . . . . . 153-0876 . . . . . . . . 153-0877 . . . . . . . .
39 34 39 34 37 32 41 36 39 35 39 40 35 40 35 40 35 37 32 37 32 38 38 33 38 33 34 39 34 39 34 37 32 32 33 38 33 33 34 39 34 34 35 36 36 32 39 35 40 35 40 35 40 35 32 32 33 33 33
373
Part Number Index Part No.
Page No.
153-0878 . . . . . . . . 34 153-0879 . . . . . . . . 34 153-0880 . . . . . . . . 34 153-0881 . . . . . . . . 34 153-0882 . . . . . . . . 32 153-0883 . . . . . . . . 32 153-0884 . . . . . . . . 33 153-0885 . . . . . . . . 33 153-0886 . . . . . . . . 34 153-0887 . . . . . . . . 34 153-0888 . . . . . . . . 34 153-0889 . . . . . . . . 34 153-0890 . . . . . . . . 35 153-0891 . . . . . . . . 36 153-0892 . . . . . . . . 36 153-0895 . . . . . . . . 36 153-1818 . . . . . . . 211 153-6229 . . . . . . . 218 153-6267 . . . . . . . 212 154-0052 . . . . . . . 108 154-0054 . . . . . . . 108 154-0055 . . . . . . . 108 154-0057 . . . . . . . 108 154-0058 . . . . . . . 108 154-0059 . . . . . . . 108 154-0060 . . . . . . . 108 154-0061 . . . . . . . 108 154-0062 . . . . . . . 108 154-0063 . . . . . . . 108 154-0064 . . . . . . . 108 154-0066 . . . . . . . 108 154-0067 . . . . . . . 109 154-0068 . . . . . . . 109 154-0069 . . . . . . . 109 154-0070 . . . . . . . 110 154-0071 . . . . . . . 110 154-0072 . . . . . . . 114 154-0073 . . . . . . . 114 154-0074 . . . . . . . 114 154-0075 . . . . . . . 114 154-0077 . . . . . . . 114 154-0078 . . . . . . . 114 154-0079 . . . . . . . 114 154-0080 . . . . . . . 114 154-0081 . . . . . . . 114 154-0082 . . . . . . . 114 154-0083 . . . . . . . 114 154-0084 . . . . . . . 114 154-0085 . . . . . . . 113 154-0086 . . . . . . . 112 154-0087 . . . . . . . 113 154-0088 . . . . . . . 113 154-0089 . . . . . . . 113 154-0090 . . . . . . . 113 154-0091 . . . . . . . 117 154-0092 . . . . . . . 114 154-0093 . . . . . . . 118 154-0094 . . . . . . . 118 154-0095 . . . . . . . 118
374
Part No.
Page No.
154-0096 . . . . . . . 118 154-0097 . . . . . . . 118 154-0098 . . . . . . . 119 154-0099 . . . . . . . 119 154-0100 . . . . . . . 119 154-0102 . . . . . . . 126 154-0103 . . . . . . . 126 154-0104 . . . . . . . 126 154-0105 . . . . . . . 126 154-0106 . . . . . . . 126 154-0107 . . . . . . . 126 154-0108 . . . . . . . 126 154-0109 . . . . . . . 126 154-0110 . . . . . . . 126 154-0111 . . . . . . . 126 154-0112 . . . . . . . 126 154-0113 . . . . . . . 127 154-0114 . . . . . . . 127 154-0115 . . . . . . . 121 155-0490 . . . . . . . 200 155-2831 . . . . . . . . 74 155-2832 . . . . . . . . 74 155-2833 . . . . . . . . 74 155-2834 . . . . . . . . 61 155-2835 . . . . . . . . 61 155-2836 . . . . . . . . 61 155-2837 . . . . . . . . 75 155-2838 . . . . . . . . 62 155-2839 . . . . . . . . 62 155-2840 . . . . . . . . 62 155-2841 . . . . . . . . 78 155-2842 . . . . . . . . 78 155-2843 . . . . . . . . 78 155-2844 . . . . . . . . 78 155-2845 . . . . . . . . 78 155-2846 . . . . . . . . 78 155-2847 . . . . . . . . 78 155-2848 . . . . . . . . 78 155-2849 . . . . . . . . 78 155-2850 . . . . . . . . 78 155-2851 . . . . . . . . 78 155-2852 . . . . . . . . 83 155-2853 . . . . . . . . 83 155-2854 . . . . . . . . 83 155-2855 . . . . . . . . 83 155-2856 . . . . . . . . 69 155-2857 . . . . . . . . 69 155-2858 . . . . . . . . 69 155-2859 . . . . . . . . 69 155-2860 . . . . . . . . 69 155-2861 . . . . . . . . 69 155-2862 . . . . . . . . 70 155-2863 . . . . . . . . 70 155-2864 . . . . . . . . 70 155-2865 . . . . . . . . 46 155-2866 . . . . . . . . 46 155-2867 . . . . . . . . 46 155-2868 . . . . . . . . 46 155-2869 . . . . . . . . 46
Part No.
Page No.
155-2870 . . . . . . . . 46 155-2871 . . . . . . . . 46 155-2872 . . . . . . . . 47 155-2873 . . . . . . . . 47 155-2874 . . . . . . . . 47 155-2875 . . . . . . . . 47 155-2876 . . . . . . . . 47 155-2877 . . . . . . . . 47 155-2878 . . . . . . . . 47 155-2879 . . . . . . . . 47 155-2880 . . . . . . . . 47 155-2881 . . . . . . . . 47 155-2882 . . . . . . . . 47 155-2883 . . . . . . . . 47 155-2884 . . . . . . . . 47 155-2885 . . . . . . . . 47 155-2886 . . . . . . . . 47 155-2887 . . . . . . . . 47 155-2888 . . . . . . . . 47 155-2889 . . . . . . . . 47 155-5471 . . . . . . . . 48 155-5514 . . . . . . . 248 155-8994 . . . . . . . 235 155-8995 . . . . . . . 235 156-0142 . . . . . . . 173 156-6129 . . . . . . . 217 156-9791 . . . . . . . 210 157-2348 . . . . . . . 205 157-3656 . . . . . . . 248 157-8510 . . . . . . . 213 158-3049 . . . . . . . 220 158-4307 . . . . . . . 221 159-1691 . . . . . . . 243 159-4587 . . . . . . . 248 159-5255 . . . . . . . 248 160-5083 . . . . . . . 217 160-7086 . . . . . . . 176 161-1833 . . . . . . . . 30 161-1834 . . . . . . . . 30 161-1835 . . . . . . . . 30 161-1836 . . . . . . . . 30 161-1837 . . . . . . . . 30 161-1838 . . . . . . . . 30 161-8021 . . . . . . . 211 161-9358 . . . . . . . 196 162-0476 . . . . . . . 235 162-2896 . . . . . . . 215 162-3122 . . . . . . . 213 162-6207 . . . . . . . 172 162-6599 . . . . . . . 235 162-8711 . . . . . . . 235 163-6018 . . . . . . . 230 163-8811 . . . . . . . 289 163-8812 . . . . . . . 289 163-8813 . . . . . . . 289 163-8814 . . . . . . . 289 164-0193 . . . . . . . 213 164-0228 . . . . . . . 174 164-5552 . . . . . . . 210
Part No.
Page No.
164-7900 . . . . . . . 248 165-0016 . . . . . . . . 58 165-0017 . . . . . . . . 58 165-0018 . . . . . . . . 58 165-0020 . . . . . . . . 58 165-0021 . . . . . . . . 58 165-0023 . . . . . . . . 58 165-0024 . . . . . . . . 58 165-0025 . . . . . . . . 58 165-2016 . . . . . . . 212 165-3938 . . . . . . . 227 166-3032 . . . . . . . 209 166-3780 . . . . . . . 235 166-9260 . . . . . . . 160 166-9261 . . . . . . . 162 166-9262 . . . . . . . 164 166-9263 . . . . . . . 164 166-9264 . . . . . . . 161 166-9265 . . . . . . . 161 166-9266 . . . . . . . 161 166-9267 . . . . . . . 161 166-9268 . . . . . . . 162 167-0678 . . . . . . . 162 168-8767 . . . . . . . 209 168-9352 . . . . . . . 209 168-9441 . . . . . . . 211 169-1576 . . . . . . . 237 169-1577 . . . . . . . 236 169-3678 . . . . . . . 181 169-4877 . . . . . . . 162 169-4878 . . . . . . . 162 169-6713 . . . . . . . 177 170-5122 . . . . . . . 235 170-6541 . . . . . . . 220 171-2532 . . . . . . . . 30 171-8676 . . . . . . . 237 171-8677 . . . . . . . 236 171-8678 . . . . . . . 236 171-8679 . . . . . . . 236 171-8728 . . . . . . . 236 171-8729 . . . . . . . 236 174-5364 . . . . . . . 235 175-0515 . . . . . . . 209 176-1550 . . . . . . . 117 176-2483 . . . . . . . 121 176-5868 . . . . . . . 251 176-8199 . . . . . . . 117 176-9203 . . . . . . . . 81 176-9204 . . . . . . . . 81 176-9205 . . . . . . . . 81 178-1265 . . . . . . . 236 178-9166 . . . . . . . 143 183-5180 . . . . . . . 129 183-5181 . . . . . . . 128 184-3489 . . . . . . . 118 184-4910 . . . . . . . 117 184-7201 . . . . . . . . 80 184-7202 . . . . . . . . 69 184-7203 . . . . . . . . 69
Part No.
Page No.
186-4133 . . . . . . . 118 186-4134 . . . . . . . 118 186-4135 . . . . . . . 118 186-4136 . . . . . . . 118 187-0964 . . . . . . . . 80 187-0965 . . . . . . . . 80 187-0966 . . . . . . . . 80 187-0967 . . . . . . . . 80 192-7514 . . . . . . . 163 192-7515 . . . . . . . 163 193-0678 . . . . . . . 163 193-0679 . . . . . . . 163 193-0681 . . . . . . . 163 193-0683 . . . . . . . 163 193-1047 . . . . . . . . 48 193-1551 . . . . . . . 115 193-8590 . . . . . . . . 80 194-2505 . . . . . . . . 79 194-2506 . . . . . . . . 79 194-4769 . . . . . . . . 66 196-5597 . . . . . . . 116 196-5861 . . . . . . . 165 196-9817 . . . . . . . . 39 196-9818 . . . . . . . . 40 197-1332 . . . . . . . 116 197-3312 . . . . . . . . 40 197-8505 . . . . . . . 116 198-5307 . . . . . . . 163 198-7170 . . . . . . . . 82 198-8517 . . . . . . . . 40 199-6625 . . . . . . . 163 1F-1651 . . . . . . . . 179 1F-9369 . . . . . . . . 179 1H-7742. . . . . . . . 176 1H-9696. . . . . . . . . 62 1J-9671 . . . . . 97,263, 269,273 1K-6937 . . . . . . . . 176 1L-0254 . . . . . . . . 176 1L-0766 . . . . . . . . 243 1L-0767 . . . . . . . . 154 1L-1480 . . . . . . . . 154 1L-1699 . . . . . . . . 154 1L-1722 . . . . . . . . 242 1L-2279 . . . . . . . . 173 1L-2287 . . . . . . . . 154 1L-2702 . . . . . . . . 244 1L-2782 . . . . . . . . 180 1L-3664 . . . . . . . . 154 1L-4031 . . . . . . . . 179 1L-4762 . . . . . . . . 244 1L-5987 . . . . . . . . 242 1L-8444 . . . . . . . . 180 1N-5998. . . . . . . . 263 1N-5999. . . . . . . . 263 1N-8559. . . . . . . . 179 1P-0043 . . . . . 184,254 1P-1219 . . . . . . . . . 62 1P-1238 . . . . . . . . . 63
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
1P-1376 . . . . . . . . 188 1P-1441 . . . . . . . . 183, 184,254 1P-1708 . . . . . . . . . 63 1P-1719 . . . . . . . . . 62 1P-3700 . . . . . 270,274 1P-3702 . . . . . . 32,33, 34,37,38,39,48, 49,50,54,55,68, 79,270,274 1P-3703 . . . . . . 32,33, 34,37,38,39,48, 49,50,54,55,68, 79,270,274 1P-3704 . . . . . . 32,33, 34,37,38,39,48, 49,50,68,79, 270,274 1P-3705 . . . . . . 32,33, 34,48,49,50, 270,274 1P-3706 . . . . . 270,274 1P-3707 . . . . . 270,274 1P-3708 . . . . . 270,274 1P-3709 . . . . . . 32,33, 34,48,49,50, 270,274 1P-4278 . . . . . . . . 287 1P-4574 . . . . . 278,279 1P-4575 . . . . . 278,279 1P-4576 . . . . . . . . 278 1P-4577 . . . . . . . . 278 1P-4578 . . . . . . . . 278 1P-4579 . . . . . 278,279 1P-4582 . . . . . 278,279 1P-4899 . . . . . . . . . 62 1P-4948 . . . . . . . . . 63 1P-5568 . . . . . . . . 175 1P-5570 . . . . . . . . 175 1P-5575 . . . . . . . . 175 1P-5598 . . . . . . . . 172 1P-5765 . . . . . . . . 281 1P-5766 . . . . . . . . 281 1P-5767 . . . . . 281,282 1P-7625 . . . . . . . . 191 1P-7929 . . . . . . . . . 63 1P-7930 . . . . . . . . . 62 1P-7931 . . . . . . . . . 63 1P-8335 . . . . . . . . 193 1P-8408 . . . . . . . . . 61 1P-8456 . . . . . . . . . 70 1P-8457 . . . . . . . . . 70 1P-8458 . . . . . . . . . 70 1P-9589 . . . . . . . . . 62 1P-9892 . . . . . . . . . 61 1P-9919 . . . . . . . . . 61 1R-5395. . . . . . . . 235 1S-0004 . . . . . . . . 273 1S-0401 . . . . . . . . 243
2006-02-28 16:22:25.0
Part No.
Page No.
1U-1577. . . . . . . . 249 1U-3176. . . . . . . . 248 1U-5263. . . . . . . . 201 1U-5264. . . . . . . . 201 1U-8292. . . . . . . . 250 1U-8302. . . . . . . . 249 1U-8303. . . . . . . . 253 1W-6256 . . . . . . . 177 1W-6919 . . . . . . . 174 1W-7534 . . . . . . . 246 1Y-0412 . . . . . . . . 176 1Y-0413 . . . . . . . . 180 1Y-7551 . . . . . . . . 180 201-0967 . . . . . . . 116 201-0968 . . . . . . . 117 201-7376 . . . . . . . 119 202-2379 . . . . . . . 109 206-0917 . . . . . . . 161 209-0485 . . . . . . . . 40 209-3231 . . . . . . . 117 211-2652 . . . . . . . . 32 211-2653 . . . . . . . . 32 211-2654 . . . . . . . . 33 211-2655 . . . . . . . . 33 211-2656 . . . . . . . . 33 211-2657 . . . . . . . . 33 211-2658 . . . . . . . . 34 211-2659 . . . . . . . . 36 211-8738 . . . . . . . . 35 213-8720 . . . . . . . . 34 214-5193 . . . . . . . 160 214-7275 . . . . . . . 166 214-7276 . . . . . . . 166 214-7277 . . . . . . . 162 214-7278 . . . . . . . 166 214-7281 . . . . . . . 166 214-7283 . . . . . . . 166 214-7286 . . . . . . . 163 214-7287 . . . . . . . 164 214-7288 . . . . . . . 164 214-7289 . . . . . . . 162 214-7290 . . . . . . . 162 214-7293 . . . . . . . 164 214-7296 . . . . . . . 162 214-7297 . . . . . . . 162 214-7302 . . . . . . . 164 214-7304 . . . . . . . 162 214-7566 . . . . . . . 269 214-7567 . . . . . . . 269 214-7568 . . . . . . . 269 215-1952 . . . . . . . 109 215-2086 . . . . . . . 166 215-2088 . . . . . . . 161 215-2090 . . . . . . . 163 218-4673 . . . . . . . . 36 221-0452 . . . . . . . 123 221-0453 . . . . . . . . 84 221-0457 . . . . . . . 126 221-0458 . . . . . . . 126
Part No.
Page No.
221-0459 . . . . . . . 126 221-0460 . . . . . . . . 74 221-0462 . . . . . . . . 53 221-0463 . . . . . . . . 53 221-0464 . . . . . . . . 74 221-0465 . . . . . . . . 74 221-0466 . . . . . . . . 74 221-0467 . . . . . . . . 74 221-0468 . . . . . . . . 75 221-0469 . . . . . . . . 75 221-0470 . . . . . . . . 75 221-0471 . . . . . . . . 75 221-0474 . . . . . . . . 53 221-0475 . . . . . . . . 75 221-0476 . . . . . . . . 75 221-0477 . . . . . . . . 55 221-0479 . . . . . . . . 75 221-0481 . . . . . . . . 84 221-0482 . . . . . . . . 84 221-0483 . . . . . . . . 84 221-0484 . . . . . . . . 84 221-0485 . . . . . . . . 84 221-0486 . . . . . . . . 84 221-0487 . . . . . . . . 84 221-0488 . . . . . . . . 84 221-0489 . . . . . . . . 84 221-0490 . . . . . . . . 84 221-0491 . . . . . . . . 84 221-0492 . . . . . . . . 85 221-0493 . . . . . . . . 84 221-0494 . . . . . . . . 84 221-0495 . . . . . . . . 84 221-0497 . . . . . . . . 84 221-0498 . . . . . . . . 84 221-0503 . . . . . . . . 76 221-0504 . . . . . . . . 76 221-0505 . . . . . . . . 76 221-0506 . . . . . . . . 75 221-0507 . . . . . . . . 77 221-0509 . . . . . . . . 76 221-0510 . . . . . . . . 75 221-0511 . . . . . . . . 75 221-0512 . . . . . . . . 75 221-0515 . . . . . . . . 77 221-0518 . . . . . . . . 83 221-0520 . . . . . . . . 81 221-0522 . . . . . . . . 81 221-0524 . . . . . . . . 81 221-0526 . . . . . . . . 82 221-0527 . . . . . . . . 82 221-0528 . . . . . . . . 82 221-0529 . . . . . . . . 76 221-0530 . . . . . . . . 76 221-0531 . . . . . . . . 77 221-0533 . . . . . . . . 78 221-0534 . . . . . . . . 78 221-0535 . . . . . . . . 78 221-0536 . . . . . . . . 82 221-0537 . . . . . . . . 80
Part No.
Page No.
221-0538 . . . . . . . . 221-0539 . . . . . . . . 221-0540 . . . . . . . . 221-0541 . . . . . . . . 221-0542 . . . . . . . . 221-0543 . . . . . . . . 221-0544 . . . . . . . . 221-0545 . . . . . . . . 221-0546 . . . . . . . . 221-0547 . . . . . . . . 221-0548 . . . . . . . . 221-0549 . . . . . . . . 221-0550 . . . . . . . . 221-0551 . . . . . . . . 221-0552 . . . . . . . . 221-0553 . . . . . . . . 221-0554 . . . . . . . . 221-0555 . . . . . . . . 221-0556 . . . . . . . . 221-0557 . . . . . . . . 221-0558 . . . . . . . . 221-0559 . . . . . . . . 221-0560 . . . . . . . . 221-0561 . . . . . . . . 221-0562 . . . . . . . . 221-0563 . . . . . . . . 221-0564 . . . . . . . . 221-0565 . . . . . . . . 221-0566 . . . . . . . . 221-0567 . . . . . . . . 221-0568 . . . . . . . . 221-0569 . . . . . . . . 221-0570 . . . . . . . . 221-0571 . . . . . . . . 221-0572 . . . . . . . . 221-0573 . . . . . . . . 221-0575 . . . . . . . . 221-0576 . . . . . . . . 221-0577 . . . . . . . . 221-0578 . . . . . . . . 221-0579 . . . . . . . . 221-0580 . . . . . . . . 221-0581 . . . . . . . . 221-0582 . . . . . . . . 221-0583 . . . . . . . . 221-0584 . . . . . . . . 221-0586 . . . . . . . . 221-0588 . . . . . . . . 221-0589 . . . . . . . . 221-0591 . . . . . . . . 221-0592 . . . . . . . . 221-0593 . . . . . . . . 221-0595 . . . . . . . . 221-0596 . . . . . . . . 221-0597 . . . . . . . . 221-0598 . . . . . . . . 221-0601 . . . . . . . . 221-0603 . . . . . . . . 221-0604 . . . . . . . .
79 79 79 80 83 83 83 83 83 83 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 74 74 74 74 74 74 74 75 53 53 53 53 53 75 53 53 53 76 76 77 75 76 76
Part No.
Page No.
221-0605 . . . . . . . . 77 221-0609 . . . . . . . . 77 221-0610 . . . . . . . . 78 221-0611 . . . . . . . . 78 221-0612 . . . . . . . . 78 221-6951 . . . . . . . 117 222-4844 . . . . . . . . 30 222-9073 . . . . . . . . 36 228-2939 . . . . . . . . 92 228-2940 . . . . . . . . 96 228-2941 . . . . . . . . 93 228-2942 . . . . . . . . 93 228-2943 . . . . . . . . 93 228-2944 . . . . . . . . 93 228-2945 . . . . . . . . 93 228-2946 . . . . . . . . 93 228-2947 . . . . . . . . 94 228-2948 . . . . . . . . 94 228-2949 . . . . . . . . 94 228-2950 . . . . . . . . 94 228-2951 . . . . . . . . 94 228-2952 . . . . . . . . 91 228-2953 . . . . . . . . 91 228-2954 . . . . . . . . 99 228-2955 . . . . . . . . 99 228-2956 . . . . . . . . 99 228-2957 . . . . . . . . 91 228-2958 . . . . . . . . 91 228-2959 . . . . . . . . 91 228-2960 . . . . . . . . 91 228-2961 . . . . . . . . 92 228-2962 . . . . . . . . 92 228-2963 . . . . . . . . 92 228-2964 . . . . . . . . 92 228-2965 . . . . . . . . 92 228-2966 . . . . . . . . 92 228-2967 . . . . . . . . 92 228-2968 . . . . . . . . 92 228-2969 . . . . . . . . 96 228-2970 . . . . . . . . 97 228-2971 . . . . . . . . 97 228-2972 . . . . . . . . 97 228-2973 . . . . . . . . 97 228-2974 . . . . . . . . 97 228-2975 . . . . . . . . 97 228-2977 . . . . . . . . 97 228-2978 . . . . . . . . 97 228-2979 . . . . . . . . 97 228-2980 . . . . . . . . 75 228-2981 . . . . . . . . 76 228-2982 . . . . . . . . 77 228-2984 . . . . . . . . 81 228-2991 . . . . . . . 123 228-3009 . . . . . . . . 99 228-3014 . . . . . . . . 96 228-3017 . . . . . . . . 76 228-3019 . . . . . . . . 74 228-3020 . . . . . . . . 93 228-3021 . . . . . . . . 96
375
Part Number Index Part No.
Page No.
228-3024 . . . . . . . . 73 228-3026 . . . . . . . . 94 228-3028 . . . . . . . . 97 228-3030 . . . . . . . . 94 228-3031 . . . . . . . . 94 228-3033 . . . . . . . . 92 228-3034 . . . . . . . . 92 228-3035 . . . . . . . . 93 228-3036 . . . . . . . . 94 228-3037 . . . . . . . . 94 228-7088 . . . . . . . 270 228-7089 . . . . . . . 270 228-7090 . . . . . . . 270 228-7091 . . . . . . . 270 228-7092 . . . . . . . 270 228-7093 . . . . . . . 270 228-7094 . . . . . . . 270 228-7095 . . . . . . . 270 228-7096 . . . . . . . 269 228-7097 . . . . . . . 269 229-4896 . . . . . . . 275 230-4931 . . . . . . . . 97 230-9992 . . . . . . . . 36 230-9999 . . . . . . . . 36 231-8794 . . . . . . . . 74 231-8795 . . . . . . . . 74 231-8796 . . . . . . . . 75 231-8797 . . . . . . . . 77 233-4815 . . . . . . . . 37 233-4820 . . . . . . . . 37 233-4822 . . . . . . . . 38 233-4824 . . . . . . . . 38 233-6301 . . . . . . . . 37 233-6319 . . . . . . . . 40 233-6320 . . . . . . . . 41 233-6542 . . . . . . . . 37 233-6544 . . . . . . . . 38 233-6545 . . . . . . . . 38 233-6546 . . . . . . . . 38 233-6547 . . . . . . . . 39 235-2472 . . . . . . . 270 235-2473 . . . . . . . 270 235-2474 . . . . . . . 270 235-2475 . . . . . . . 270 235-2476 . . . . . . . 270 235-2477 . . . . . . . 270 235-2478 . . . . . . . 270 235-2479 . . . . . . . 270 235-2480 . . . . . . . 270 236-7638 . . . . . . . 115 238-1124 . . . . . . . . 82 238-1125 . . . . . . . . 74 238-5078 . . . . . . . 269 238-5079 . . . . . . . 269 238-5080 . . . . . . . 269 238-5081 . . . . . . . 269 238-5082 . . . . . . . 269 238-5083 . . . . . . . 269 238-5084 . . . . . . . 269
376
Part No.
Page No.
238-5086 . . . . . . . 269 238-8337 . . . . . . . . 58 238-8339 . . . . . . . . 58 238-8340 . . . . . . . . 58 238-8341 . . . . . . . . 58 238-8342 . . . . . . . . 58 238-8343 . . . . . . . . 30 238-8344 . . . . . . . . 30 238-8346 . . . . . . . . 30 238-8347 . . . . . . . . 30 241-4318 . . . . . . . . 79 242-9532 . . . . . . . 118 243-1914 . . . . . . . . 33 243-1915 . . . . . . . . 33 243-1916 . . . . . . . . 33 243-1917 . . . . . . . . 33 243-1918 . . . . . . . . 33 243-1919 . . . . . . . . 36 243-1920 . . . . . . . . 34 243-1921 . . . . . . . . 41 243-1923 . . . . . . . . 36 243-1925 . . . . . . . . 34 243-1926 . . . . . . . . 39 243-1928 . . . . . . . . 34 243-1929 . . . . . . . . 32 243-1930 . . . . . . . . 34 243-1931 . . . . . . . . 34 243-4636 . . . . . . . . 83 243-4637 . . . . . . . . 83 243-4638 . . . . . . . . 83 243-4639 . . . . . . . . 83 243-4640 . . . . . . . . 83 243-4641 . . . . . . . . 83 243-4642 . . . . . . . . 83 243-4643 . . . . . . . . 83 243-4644 . . . . . . . . 83 243-4645 . . . . . . . . 84 243-4646 . . . . . . . . 80 245-1412 . . . . . . . . 30 245-1413 . . . . . . . . 30 245-1420 . . . . . . . . 58 250-6590 . . . . . . . . 37 251-2185 . . . . . . . . 39 253-1348 . . . . . . . 114 253-1349 . . . . . . . 115 253-1351 . . . . . . . 116 253-1352 . . . . . . . 116 253-1353 . . . . . . . 116 253-1354 . . . . . . . 117 253-1357 . . . . . . . 115 253-1358 . . . . . . . 115 253-1359 . . . . . . . 116 253-1360 . . . . . . . 116 253-1361 . . . . . . . 116 253-1362 . . . . . . . 117 253-1363 . . . . . . . 114 253-1364 . . . . . . . 114 253-1371 . . . . . . . 144 253-1380 . . . . . . . 116
Part No.
Page No.
253-1384 . . . . . . . 111 253-8788 . . . . . . . . 54 255-4878 . . . . . . . 117 255-4883 . . . . . . . 126 255-4886 . . . . . . . 128 256-0198 . . . . . . . . 32 256-1388 . . . . . . . 105 256-4553 . . . . . . . 117 257-0374 . . . . . . . 117 257-2723 . . . . . . . 115 257-9353 . . . . . . . . 34 260-9207 . . . . . . . 262 261-2213 . . . . . . . . 37 261-2214 . . . . . . . . 39 268-5969 . . . . . . . . 32 268-5970 . . . . . . . . 33 268-5971 . . . . . . . . 33 268-5972 . . . . . . . . 33 268-5973 . . . . . . . . 34 269-3994 . . . . . . . 112 270-1528 . . . . . . . 273 270-1533 . . . . . . . 273 270-1535 . . . . . . . 274 270-1537 . . . . . . . 275 270-1539 . . . . . . . 275 270-1540 . . . . . . . 275 276-2087 . . . . . . . . 44 276-2088 . . . . . . . . 44 276-2089 . . . . . . . . 44 276-2090 . . . . . . . . 44 276-2091 . . . . . . . . 44 2D-0058. . . . . . . . 242 2D-0193. . . . . . . . 242 2D-1683. . . . . . . . 174 2D-7325. . . . . . . . 179 2D-8910. . . . . . . . 243 2D-8912. . . . . . . . 244 2H-3939. . . . . . . . 243 2H-3940. . . . . . . . 243 2H-6338. . . . . . . . 117 2H-9091. . . . . . . . 242 2J-2668 . . . . . . . . 264 2J-4211 . . . . . . . . 243 2J-5608 . . . . . . . . 264 2K-5056 . . . . . . . . 283 2L-0332 . . . . . . . . 180 2L-2813 . . . . . . . . 176 2L-3331 . . . . . . . . 242 2L-3622 . . . . . . . . 244 2L-3623 . . . . . . . . 180 2L-7070 . . . . . . . . 243 2L-8228 . . . . . . . . 243 2M-5762 . . . . . . . 283 2M-9780 . . . . . . . 108, 109,143,263, 269,274 2M-9786 . . . . . . . 183 2N-1287. . . . . . . . 186 2N-1288. . . . . . . . 186
Part No.
Page No.
2N-1362. . . . . . . . 242 2N-1931. . . . . . . . 173 2N-3378. . . . . . . . 187 2N-3542. . . . . . . . 176 2N-3543. . . . . . . . 173 2N-3599. . . . . . . . 180 2N-7308. . . . . . . . 242 2N-8037. . . . . . . . 186 2N-8142. . . . . . . . 199 2P-0921 . . . . . . . . . 60 2P-0922 . . . . . . . . . 60 2P-0923 . . . . . . . . . 60 2P-0924 . . . . . . . . . 60 2P-0987 . . . . . . . . . 60 2P-0988 . . . . . . . . . 60 2P-0991 . . . . . . . . . 60 2P-0995 . . . . . . . . . 60 2P-1276 . . . . . . . . 192 2P-1278 . . . . . . . . 192 2P-1279 . . . . . . . . 254 2P-1280 . . . . . . . . 254 2P-1281 . . . . . . . . 192 2P-1282 . . . . . . . . 192 2P-1283 . . . . . . . . 192 2P-1284 . . . . . . . . 192 2P-1285 . . . . . . . . 192 2P-1286 . . . . . . . . 254 2P-1289 . . . . . . . . 185 2P-1291 . . . . . . . . 196 2P-1292 . . . . . . . . 189 2P-1296 . . . . . . . . 200 2P-1297 . . . . . . . . 200 2P-1298 . . . . . . . . 200 2P-1306 . . . . . . . . 179 2P-1307 . . . . . . . . 188 2P-1311 . . . . . . . . 186 2P-1312 . . . . . . . . 186 2P-1313 . . . . . . . . . 62 2P-1314 . . . . . . . . 188 2P-1315 . . . . . . . . . 70 2P-1325 . . . . . . . . 193 2P-1326 . . . . . . . . 193 2P-1400 . . . . . . . . . 61 2P-1409 . . . . . . . . . 61 2P-1411 . . . . . . . . . 62 2P-1415 . . . . . . . . . 48 2P-1416 . . . . . . . . . 48 2P-1418 . . . . . . . . . 49 2P-1420 . . . . . . . . . 50 2P-1422 . . . . . . . . . 49 2P-1424 . . . . . . . . . 48 2P-1458 . . . . . . . . . 61 2P-1461 . . . . . . . . . 61 2P-1462 . . . . . . . . . 61 2P-1801 . . . . . . . . . 62 2P-2061 . . . . . . . . 189 2P-2204 . . . . . . . . 193 2P-2206 . . . . . . . . 182 2P-2523 . . . . . . . . . 70
Part No.
Page No.
2P-2675 . . . . . . . . . 66 2P-3178 . . . . . . . . . 60 2P-3263 . . . . . . . . . 50 2P-3265 . . . . . . . . . 49 2P-3267 . . . . . . . . . 49 2P-3268 . . . . . . . . . 48 2P-3269 . . . . . . . . . 48 2P-3270 . . . . . . . . . 48 2P-3930 . . . . . . . . . 48 2P-3931 . . . . . . . . . 50 2P-3932 . . . . . . . . . 49 2P-3933 . . . . . . . . . 49 2P-3934 . . . . . . . . . 48 2P-3935 . . . . . . . . . 48 2P-4813 . . . . . . . . . 65 2P-6704 . . . . . . . . . 66 2P-6728 . . . . . . . . . 48 2P-6729 . . . . . . . . . 48 2P-6730 . . . . . . . . . 49 2P-6731 . . . . . . . . . 49 2P-6732 . . . . . . . . . 50 2P-6733 . . . . . . . . . 48 2P-7211 . . . . . . . . 198 2P-7212 . . . . . . . . 193 2P-7214 . . . . . . . . 190 2P-7215 . . . . . . . . 193 2P-7216 . . . . . . . . 193 2P-7636 . . . . . . . . 189 2P-8072 . . . . . . . . 190 2P-8098 . . . . . . . . 198 2P-8130 . . . . . . . . 198 2P-8148 . . . . . 184,254 2P-8355 . . . . . . . . . 66 2P-8421 . . . . . . . . 248 2P-8430 . . . . . . . . 189 2P-8447 . . . . . . . . 196 2P-8511 . . . . . . . . 187 2P-9376 . . . . . . . . 199 2P-9697 . . . . . . . . 262 2P-9921 . . . . . . . . . 88 2P-9923 . . . . . . . . . 65 2P-9939 . . . . . . . . . 67 2R-1576. . . . . . . . 172 2R-1922. . . . . . . . 242 2R-6276. . . . . . . . 189 2R-6806. . . . . . . . 188 2S-2251 . . . . . . . . 273 2S-4078 . . . . . . . . 263, 269,274 2S-7905 . . . . . . . . 262 2T-1922 . . . . . . . . 208 2T-1925 . . . . . . . . 208 2T-2149 . . . . . . . . 221 2T-2169 . . . . . . . . 174 2T-2170 . . . . . . . . 208 2T-2171 . . . . . . . . 207 2T-2305 . . . . . . . . 208 2T-2396 . . . . . . . . 208 2T-2416 . . . . . . . . 207
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
2T-2475 . . . . . . . . 178 2T-2991 . . . . . . . . 210 2T-3000 . . . . . . . . 280 2T-3001 . . . . . . . . 280 2U-6826. . . . . . . . 236 2V-2043 . . . . . . . . 254 2Y-2347 . . . . . . . 96,97 2Y-5841 . . . . . . . . 263 2Y-6461 . . . . . . . . 263 2Y-6462 . . . . . . . . 263 3B-6493 . . . . . . . . 176 3B-6494 . . . . . . . . 176 3B-6495 . . . . . . . . 176 3B-6496 . . . . . . . . 176 3B-6497 . . . . . . . . 176 3B-6498 . . . . . . . . 176 3B-6499 . . . . . . . . 176 3B-6500 . . . . . . . . 177 3B-6552 . . . . . . . . 174 3B-6553 . . . . . . . . 174 3B-6554 . . . . . . . . 176 3B-6555 . . . . . . . . 174 3B-6556 . . . . . . . . 174 3B-6767 . . . . . . . . 176 3B-6772 . . . . . . . . 173 3B-6773 . . . . . . . . 174 3B-7255 . . . . . . . . 172 3B-7259 . . . . . . . . 174 3B-7721 . . . . . . . . 172 3B-7722 . . . . . . . . 172 3B-7728 . . . . . . . . 176 3B-7729 . . . . . . . . 176 3B-7731 . . . . . . . . 173 3B-7732 . . . . . . . . 173 3B-7762 . . . . . . . . 180 3B-7896 . . . . . . . . 173 3B-7900 . . . . . . . . 180 3B-8822 . . . . . . . . 174 3D-2187. . . . . . . . 173 3D-2824. . . . . . . . 108, 109,263,269, 274 3D-4022. . . . . . . . 181 3D-6370. . . . . . . . 243 3D-7587. . . . . . . . 242 3D-8884. . . . . . . . 174 3D-8911. . . . . . . . 242 3D-8913. . . . . . . . 243 3D-9253. . . . . . . . 243 3E-2310 . . . . . . . . 228 3E-2315 . . . . . . . . 172 3E-2332 . . . . . . . . 251 3E-2333 . . . . . . . . 205 3E-2337 . . . . . . . . 213 3E-2343 . . . . . . . . 225 3E-2344 . . . . . . . . 202 3E-2345 . . . . . . . . 228 3E-4013 . . . . . . . . 139 3E-4014 . . . . . . . . 139
2006-02-28 16:22:25.0
Part No.
Page No.
3E-4015 . . . . . . . . 139 3E-4016 . . . . . . . . 139 3E-4017 . . . . . . . . 139 3E-4018 . . . . . . . . 139 3E-4020 . . . . . . . . 138 3E-4021 . . . . . . . . 138 3E-4025 . . . . . . . . 139 3E-4026 . . . . . . . . 139 3E-4027 . . . . . . . . 139 3E-4028 . . . . . . . . 139 3E-4029 . . . . . . . . 139 3E-4030 . . . . . . . . 139 3E-4038 . . . . . . . . 164 3E-4062 . . . . . . . . 288 3E-4070 . . . . . . . . 288 3E-4071 . . . . . . . . 288 3E-4088 . . . . . . . . 162 3E-4288 . . . . . 123,270 3E-4289 . . . . . . . . 123, 124,270 3E-4296 . . . . . . . . 123, 124,271 3E-4297 . . . . . . 97,98, 99,123,124,270 3E-4298 . . . . . . 83,97, 98,99,123,124, 271 3E-4299 . . . . . . 83,97, 98,99,124,125, 271 3E-6703 . . . . . . . . 114 3E-6761 . . . . . 123,270 3E-6762 . . . . . . 83,97, 98,99,124,125, 271 3E-6763 . . . . . . 97,98, 99,124,271 3E-6764 . . . . . . 83,98, 99,124,125,271 3E-6801 . . . . . . . . . 54 3E-6802 . . . . . . . . . 54 3E-6803 . . . . . . . . . 55 3E-6804 . . . . . . . . . 55 3E-6805 . . . . . . . . . 55 3E-6806 . . . . . . . . . 54 3E-6814 . . . . . . . . 166 3E-6815 . . . . . . . . 162 3E-6818 . . . . . . . . . 77 3E-6820 . . . . . . . . . 50 3E-6822 . . . . . . . . . 47 3E-6826 . . . . . . . . . 68 3E-6831 . . . . . . . . . 74 3E-6832 . . . . . . . . . 74 3E-6833 . . . . . . . . . 75 3E-6836 . . . . . . . . . 79 3E-6867 . . . . . . . . . 68 3E-6868 . . . . . . . . . 68 3E-7401 . . . . . . . . 217 3E-7403 . . . . . . . . 206
Part No.
Page No.
3E-7405 . . . . . . . . 188 3E-7407 . . . . . . . . 224 3E-7420 . . . . . . . . 210 3E-7423 . . . . . . . . 218 3E-7426 . . . . . . . . 216 3E-7433 . . . . . . . . 213 3E-7437 . . . . . . . . 234 3E-7443 . . . . . . . . 223 3E-7448 . . . . . . . . 177 3E-7449 . . . . . . . . 207 3F-1783 . . . . . . . . 176 3F-2779 . . . . . . . . 175 3H-0120. . . . . . . . 174 3H-2891. . . . . . . . 180 3H-9690. . . . . . . . 243 3J-1907 . . . . . . . . 108, 109,143,144, 263,269,273 3J-5389 . . . . . . . . 262 3J-5390 . . . . . . . . 262 3J-7352 . . . . . . . . 188 3J-7354 . . . . . . . . 108, 135,143,263, 269,273 3J-7355 . . . . . . . . 182 3K-0360 . . . . . 60,108, 109,143,263, 269,273 3K-8460 . . . . . . . . 263 3L-3358 . . . . . . . . 180 3L-3869 . . . . . . . . 242 3L-3870 . . . . . . . . 154 3L-6521 . . . . . . . . 179 3L-7024 . . . . . . . . 174 3L-7055 . . . . . . . . 242 3L-9071 . . . . . . . . 176 3L-9762 . . . . . . . . 154 3M-7045 . . . . . . . 262 3N-1294. . . . . . . . 190 3N-3893. . . . . . . . 188 3N-7602. . . . . . . . 177 3N-9749. . . . . . . . 180 3P-0421 . . . . . . . . . 66 3P-0422 . . . . . . . . . 66 3P-0440 . . . . . . . . 189 3P-0595 . . . . . . . . . 67 3P-0642 . . . . . . . . . 70 3P-0643 . . . . . . . . . 70 3P-0644 . . . . . . . . . 70 3P-0645 . . . . . . . . . 70 3P-1155 . . . . . . . . 269 3P-1156 . . . . . . . . 269 3P-1427 . . . . . . . . 189 3P-1823 . . . . . . . . 172 3P-1932 . . . . . . . . 248 3P-2001 . . . . . . . . 191 3P-2298 . . . . . . . . 191 3R-2704. . . . . . . . 182 3R-2705. . . . . . . . 182
Part No.
Page No.
3R-3976. . . . . . . . 182 3R-4437. . . . . 183,254 3R-5387. . . . . . . . 185 3R-6789. . . . . . . . 264 3R-6790. . . . . . . . 189 3R-9704. . . . . . . . 183 3S-1099 . . . . . . . . 188 3S-6115 . . . . . . . . 246 3S-7116 . . . . . . . . . 72 3S-7166 . . . . . . . . . 72 3S-7252 . . . . . . . . . 72 3S-8330 . . . . . . . . . 72 3S-8496 . . . . . . . . . 62 3S-8497 . . . . . . . . . 63 3S-8498 . . . . . . . . . 63 3S-8499 . . . . . . . . . 64 3S-8501 . . . . . . . . . 64 3S-8502 . . . . . . . . . 65 3S-8503 . . . . . . . . . 65 3S-8567 . . . . . . . . . 62 3S-8568 . . . . . . . . . 63 3S-8569 . . . . . . . . . 63 3S-8570 . . . . . . . . . 64 3S-8571 . . . . . . . . . 64 3S-8572 . . . . . . . . . 65 3S-8573 . . . . . . . . . 65 3S-8606 . . . . . . . . . 72 3S-8617 . . . . . . . . . 62 3S-8618 . . . . . . . . . 63 3S-8619 . . . . . . . . . 63 3S-8666 . . . . . . . . 242 3S-8743 . . . . . . . . 174 3S-8972 . . . . . . . . . 64 3S-8973 . . . . . . . . . 64 3S-8974 . . . . . . . . . 64 3S-8975 . . . . . . . . . 65 3S-8976 . . . . . . . . . 62 3S-9175 . . . . . . . . 242 3S-9327 . . . . . . . . . 63 3S-9328 . . . . . . . . . 63 3S-9329 . . . . . . . . . 64 3S-9330 . . . . . . . . . 64 3S-9331 . . . . . . . . . 65 3S-9332 . . . . . . . . . 66 3S-9454 . . . . . . . . . 62 3T-0811 . . . . . . . . 178 3T-4389 . . . . . . . . 190 3T-4965 . . . . . . . . 248 3T-9549 . . . . . . . . 249 3V-5642 . . . . . . . . 283 3V-7750 . . . . . . . . 249 3Y-2888 . . . . . . . . 178 3Y-2889 . . . . . . . . 179 4B-5984 . . . . . . . . 176 4B-6067 . . . . . . . . 174 4B-7107 . . . . . . . . 180 4B-7770 . . . . . . . . 180 4B-9030 . . . . . . . . 176 4C-6494. . . . . . . . 238
Part No.
Page No.
4C-6495. . . . . . . . 238 4D-0124. . . . . . . . 243 4D-0513. . . . . . . . 243 4D-0577. . . . . . . . 243 4D-0582. . . . . . . . 242 4D-0583. . . . . . . . 246 4D-2016. . . . . . . . 244 4D-2560. . . . . . . . 242 4D-3734. . . . . . . . 242 4D-4267. . . . . . . . 244 4D-4917. . . . . . . . 247 4D-6314. . . . . . . . 242 4D-6475. . . . . . . . 243 4D-6534. . . . . . . . 245 4D-6585. . . . . . . . 244 4D-9976. . . . . . . . 246 4H-6147. . . . . . . . 242 4I-0785 . . . . . . . . 210 4I-0899 . . . . . . . . 248 4I-0900 . . . . . . . . 253 4I-6140 . . . . . . . . 220 4I-6141 . . . . . . . . 220 4I-6287 . . . . . . . . 220 4I-7651 . . . . . . . . 222 4I-7745 . . . . . . . . 209 4I-7756 . . . . . . . . 211 4I-8888 . . . . . . . . 272 4I-8889 . . . . . . . . 272 4I-8891 . . . . . . . . 272 4I-8984 . . . . . . . . 210 4J-0519 . . . . . 269,274 4J-0520 . . . . . . 46,47, 53,62,63,64,65, 66,67,75,76,77, 78,92,93,94,95, 114,115,116, 117,157,269, 274 4J-0521 . . . . . 269,274 4J-0522 . . . . . . 37,46, 47,53,62,63,64, 65,66,75,76,77, 92,93,94,95,96, 114,115,116, 117,157,269, 274 4J-0523 . . . . . 269,274 4J-0524 . . . . . . 46,47, 54,62,63,64,65, 66,75,76,77,78, 92,93,94,95,96, 114,115,116, 117,157,269, 274 4J-0525 . . . . . 269,274 4J-0526 . . . . . 269,274
377
Part Number Index Part No.
Page No.
4J-0527 . . . . . . 46,47, 62,63,64,65,66, 67,75,76,77,78, 93,94,95,96, 114,115,116, 117,269,274 4J-3914 . . . . . . . . 243 4J-5022 . . . . . . . . 117 4J-5027 . . . . . . . . . 66 4J-5140 . . . . . . 62,63, 64,65,67,75,76, 77,78,92,93,94, 95,114,115, 117,269,274 4J-5267 . . . . . . 32,37, 46,47,53,62,63, 64,65,66,67,75, 76,77,78,92,93, 94,95,114,115, 116,117,157, 269,274 4J-5477 . . . . . . . . 118, 119,120,137, 138,147,148, 158,270,274, 275 4J-7533 . . . . . . . . 263, 269,273 4J-8996 . . . . . . 68,69, 79,80,96,117, 118,269 4K-1388 . . . . . . . . 263, 269,274 4K-2430 . . . . . . . . 179 4K-5629 . . . . . . . . 172 4K-6297 . . . . . . . . 190 4L-0520 . . . . . . . . . 78 4L-1848 . . . . . . . . 179 4L-9337 . . . . . . . . 280 4M-5317 . . . . . . . 172 4M-8973 . . . . . . . 174 4R-6450. . . . . . . . 187 4R-8604. . . . . . . . 186 4R-8605. . . . . . . . 186 4R-8670. . . . . . . . 185 4R-8686. . . . . . . . 190 4R-8697. . . . . . . . 182 4S-3572 . . . . . . . . 196 4S-3652 . . . . . . . . 196 4S-4857 . . . . . . . . 200 4S-4869 . . . . . . . . 200 4S-5403 . . . . . . . . . 62 4S-5405 . . . . . . . . . 64 4S-5407 . . . . . . . . . 65 4S-5414 . . . . . . . . . 72 4S-6399 . . . . . . . . 185 4S-6678 . . . . . . . . 185 4S-6679 . . . . . . . . 249 4S-6680 . . . . . . . . 189
378
Part No.
Page No.
4S-6797 . . . . . . . . 189 4S-7492 . . . . . . . . . 63 4S-7493 . . . . . . . . . 63 4S-7494 . . . . . . . . . 63 4S-7495 . . . . . . . . . 64 4S-7496 . . . . . . . . . 64 4S-7497 . . . . . . . . . 65 4S-7498 . . . . . . . . . 66 4S-7507 . . . . . . . . . 72 4S-7606 . . . . . . . . 243 4V-8778 . . . . . . . . 189 4W-4076 . . . . . . . 186 4Y-9939 . . . . . . . . 213 4Z-8154 . . . . . . . . . 51 5B-1585 . . . . . . . . 173 5B-3254 . . . . . . . . 254 5B-7666 . . . . . . . . 174 5B-8279 . . . . . . . . 176 5B-8978 . . . . . . . . 179 5B-8979 . . . . . . . . 180 5C-7617. . . . . . . . 235 5C-7618. . . . . . . . 240 5D-0269. . . . . . . . 244 5D-1026. . . . . . . . 287 5D-9231. . . . . . . . 187 5E-3952 . . . . . . . . 173 5E-9234 . . . . . . . . 214 5E-9235 . . . . . . . . 215 5F-6371 . . . . . . . . 242 5G-2740 . . . . . . . 201 5G-4741 . . . . . . . 248 5G-7111 . . . . . . . 189 5H-0275. . . . . . . . 183, 184,254 5H-4017. . . . . . . . 264 5H-4018. . . . . . . . 264 5H-4019. . . . . . . . 264 5H-4020. . . . . . . . 264 5H-4778. . . . . . . . 243 5H-8853. . . . . . . . 270 5H-8936. . . . . . . . 173 5I-3178 . . . . . . . . 196 5I-3183 . . . . . . . . 220 5I-3190 . . . . . . . . 202 5I-4015 . . . . . . . . 202 5I-4075 . . . . . . . . 202 5I-4198 . . . . . . . . 213 5I-4332 . . . . . . . . 212 5I-4370 . . . . . . . . 209 5I-4376 . . . . . . . . 229 5I-7408 . . . . . . . . 233 5I-8883 . . . . . . . . 219 5J-5267 . . . . . . . . . 78 5J-7303 . . . . . . . . 186 5K-3771 . . . . . . . . 243 5K-5068 . . . . . . . . 172 5K-6875 . . . . . . . . 172
Part No.
Page No.
5K-9090 . . . . . . 35,39, 40,50,51,55,56, 69,70,80,81,82, 96,97,118,119, 120,121,158, 270,274,275 5L-3993 . . . . . . . . 180 5L-5502 . . . . . . . . 179 5L-8289 . . . . . . . . 180 5L-8722 . . . . . . . . 174 5M-6213 . . . . . . . 262 5M-6214 . . . . . . . 262 5N-2638. . . . . . . . 176 5N-2642. . . . . . . . 180 5P-0045 . . . . . . . . 264 5P-0046 . . . . . . . . 264 5P-0047 . . . . . . . . 264 5P-0048 . . . . . . . . 264 5P-0049 . . . . . . . . 264 5P-0050 . . . . . . . . 264 5P-0200 . . . . . . . . . 44 5P-0201 . . . . . . . . . 44 5P-0202 . . . . . . . . . 44 5P-0203 . . . . . . . . . 44 5P-0220 . . . . . . . . 202 5P-0234 . . . . . . . . 245 5P-0405 . . . . . . . . 264 5P-0419 . . . . . . . . 188 5P-0477 . . . . . . . . . 52 5P-0492 . . . . . . . . 178 5P-0597 . . . . . . . . 287 5P-0599 . . . . . . . . 287 5P-0600 . . . . . . . . 287 5P-0720 . . . . . . . . 169 5P-0721 . . . . . . . . 169 5P-0722 . . . . . . . . 169 5P-0763 . . . . . . . . 168 5P-0764 . . . . . . . . 168 5P-0765 . . . . . . . . 168 5P-0767 . . . . . . . . 168 5P-0788 . . . . . . . . 199 5P-0789 . . . . . . . . 183 5P-0912 . . . . . . . . 182 5P-0922 . . . . . . . . . 87 5P-0958 . . . . . . . . 287 5P-1010 . . . . . . . . . 52 5P-1027 . . . . . . . . . 52 5P-1031 . . . . . . . . . 65 5P-1042 . . . . . . . . 248 5P-1125 . . . . . . . . . 48 5P-1126 . . . . . . . . . 48 5P-1127 . . . . . . . . . 48 5P-1128 . . . . . . . . . 49 5P-1129 . . . . . . . . . 49 5P-1130 . . . . . . . . . 50 5P-1131 . . . . . . . . . 48 5P-1132 . . . . . . . . . 48 5P-1133 . . . . . . . . . 48 5P-1134 . . . . . . . . . 49
Part No.
Page No.
5P-1135 . . . . . . . . . 49 5P-1136 . . . . . . . . . 50 5P-1251 . . . . . . . . 168 5P-1252 . . . . . . . . 168 5P-1253 . . . . . . . . 168 5P-1254 . . . . . . . . 168 5P-1255 . . . . . . . . 168 5P-1256 . . . . . . . . 168 5P-1257 . . . . . . . . 168 5P-1258 . . . . . . . . 168 5P-1259 . . . . . . . . 168 5P-1260 . . . . . . . . 168 5P-1261 . . . . . . . . 168 5P-1262 . . . . . . . . 168 5P-1263 . . . . . . . . 168 5P-1264 . . . . . . . . 168 5P-1265 . . . . . . . . 168 5P-1266 . . . . . . . . 168 5P-1267 . . . . . . . . 168 5P-1268 . . . . . . . . 168 5P-1269 . . . . . . . . 168 5P-1270 . . . . . . . . 168 5P-1271 . . . . . . . . 200 5P-1272 . . . . . . . . 198 5P-1291 . . . . . . . . 169 5P-1292 . . . . . . . . 169 5P-1293 . . . . . . . . 169 5P-1294 . . . . . . . . 169 5P-1295 . . . . . . . . 169 5P-1296 . . . . . . . . 169 5P-1300 . . . . . . . . 169 5P-1306 . . . . . . . . . 51 5P-1307 . . . . . . . . . 51 5P-1308 . . . . . . . . . 51 5P-1318 . . . . . . . . 248 5P-1404 . . . . . . . . 248 5P-1450 . . . . . . . . . 70 5P-1451 . . . . . . . . . 70 5P-1452 . . . . . . . . . 70 5P-1453 . . . . . . . . . 70 5P-1480 . . . . . . . . 269 5P-1706 . . . . . . . . . 63 5P-1716 . . . . . . . . 248 5P-1775 . . . . . . . . 193 5P-1838 . . . . . . . . 178 5P-1883 . . . . . . . . 188 5P-1907 . . . . . . . . 181 5P-1945 . . . . . . . . 184 5P-2094 . . . . . . . . 169 5P-2191 . . . . . . . . 198 5P-2210 . . . . . . . . 203 5P-2211 . . . . . . . . 248 5P-2230 . . . . . . . . 287 5P-2231 . . . . . . . . 249 5P-2242 . . . . . . . . 197 5P-2244 . . . . . . . . 194 5P-2299 . . . . . . . . 262 5P-2303 . . . . . . . . 182 5P-2423 . . . . . . . . 181
Part No.
Page No.
5P-2467 . . . . . . . . . 61 5P-2574 . . . . . . . . 189 5P-2599 . . . . . . . . . 49 5P-2604 . . . . . . . . . 49 5P-2618 . . . . . . . . 188 5P-2619 . . . . . . . . . 49 5P-2620 . . . . . . . . . 49 5P-2621 . . . . . . . . . 49 5P-2622 . . . . . . . . . 49 5P-2645 . . . . . . . . 190 5P-2647 . . . . . . . . 193 5P-2657 . . . . . . . . 186 5P-2825 . . . . . . . . . 51 5P-2909 . . . . . . . . 262 5P-2937 . . . . . . . . 178 5P-3093 . . . . . . . . . 48 5P-3094 . . . . . . . . . 49 5P-3096 . . . . . . . . . 49 5P-3099 . . . . . . . . . 50 5P-3101 . . . . . . . . . 48 5P-3102 . . . . . . . . . 49 5P-3103 . . . . . . . . . 49 5P-3105 . . . . . . . . . 50 5P-3106 . . . . . . . . . 52 5P-3153 . . . . . . . . . 51 5P-3165 . . . . . . . . 199 5P-3166 . . . . . . . . 199 5P-3229 . . . . . . . . . 64 5P-3230 . . . . . . . . . 66 5P-3237 . . . . . . . . 189 5P-3238 . . . . . . . . 172 5P-3264 . . . . . . . . 190 5P-3273 . . . . . . . . 186 5P-3411 . . . . . . . . 191 5P-3415 . . . . . . . . 178 5P-3422 . . . . . . . . 179 5P-3426 . . . . . . . . 190 5P-3466 . . . . . . . . 191 5P-3501 . . . . . . . . 178 5P-3621 . . . . . . . . 193 5P-3741 . . . . . . . . 180 5P-3857 . . . . . . . . . 62 5P-3903 . . . . . . . . 249 5P-3923 . . . . . . . . . 87 5P-4248 . . . . . . . . 189 5P-4268 . . . . . . . . 269 5P-4269 . . . . . . . . 196 5P-4299 . . . . . . . . 262 5P-4318 . . . . . . . . 190 5P-4321 . . . . . . . . . 67 5P-4375 . . . . . . . . 199 5P-4479 . . . . . . . . 186 5P-4481 . . . . . . . . 178 5P-4487 . . . . . . . . 178 5P-4494 . . . . . . . . 199 5P-4495 . . . . . . . . 197 5P-4499 . . . . . . . . 248 5P-4588 . . . . . . . . 196 5P-4592 . . . . . . . . 186
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
5P-4653 . . . . . . . . 193 5P-4674 . . . . . . . . 248 5P-4675 . . . . . . . . 178 5P-4699 . . . . . . . . . 71 5P-4700 . . . . . . . . . 71 5P-4818 . . . . . . . . 176 5P-4877 . . . . . . . . . 48 5P-4900 . . . . . . . . 182 5P-4937 . . . . . . . . . 51 5P-4968 . . . . . . . . 193 5P-4982 . . . . . . . . 197 5P-4983 . . . . . . . . 197 5P-4984 . . . . . . . . 197 5P-4996 . . . . . . . . 262 5P-5000 . . . . . . . . . 51 5P-5003 . . . . . . . . 184 5P-5004 . . . . . . . . 184 5P-5005 . . . . . . . . 184 5P-5006 . . . . . . . . 184 5P-5007 . . . . . . . . 184 5P-5008 . . . . . . . . 184 5P-5009 . . . . . . . . 184 5P-5052 . . . . . . . . 283 5P-5121 . . . . . . . . . 66 5P-5479 . . . . . . . . 137 5P-5480 . . . . . . . . 137 5P-5483 . . . . . . . . 136 5P-5484 . . . . . . . . 135 5P-5485 . . . . . . . . 137 5P-5486 . . . . . . . . 137 5P-5487 . . . . . . . . 137 5P-5488 . . . . . . . . 137 5P-5489 . . . . . . . . 136 5P-5490 . . . . . . . . 136 5P-5491 . . . . . . . . 136 5P-5492 . . . . . . . . 135 5P-5493 . . . . . . . . 135 5P-5494 . . . . . . . . 135 5P-5495 . . . . . . . . 135 5P-5496 . . . . . . . . 135 5P-5497 . . . . . . . . 135 5P-5498 . . . . . . . . 135 5P-5499 . . . . . . . . 135 5P-5501 . . . . . . . . 136 5P-5503 . . . . . . . . 136 5P-5504 . . . . . . . . 136 5P-5505 . . . . . . . . 136 5P-5506 . . . . . . . . 136 5P-5507 . . . . . . . . 136 5P-5509 . . . . . . . . 136 5P-5528 . . . . . . . . 178 5P-5613 . . . . . . . . 203 5P-5777 . . . . . . . . 249 5P-6399 . . . . . . . . 182 5P-6412 . . . . . . . . 169 5P-6416 . . . . . . . . 191 5P-6436 . . . . . . . . 270 5P-6437 . . . . . . . . 185 5P-6451 . . . . . . . . . 48
2006-02-28 16:22:25.0
Part No.
Page No.
5P-6661 . . . . . . . . 185 5P-6718 . . . . . . . . 269 5P-6941 . . . . . . . . 193 5P-6944 . . . . . . . . 248 5P-7154 . . . . . . . . 198 5P-7452 . . . . . . . . 137 5P-7453 . . . . . . . . 137 5P-7540 . . . . . . . . 184 5P-7701 . . . . . . . . 269 5P-7759 . . . . . . . . 154 5P-7812 . . . . . . . . 269 5P-7813 . . . . . . . . 269 5P-7814 . . . . . . . . 269 5P-7815 . . . . . . . . 269 5P-7816 . . . . . . . . 269 5P-7817 . . . . . . . . 269 5P-7884 . . . . . . . . . 52 5P-7886 . . . . . . . . . 48 5P-7903 . . . . . . . . . 50 5P-7915 . . . . . . . . 245 5P-7916 . . . . . . . . 245 5P-7917 . . . . . . . . 245 5P-7918 . . . . . . . . 245 5P-7919 . . . . . . . . 245 5P-7920 . . . . . . . . 245 5P-7929 . . . . . . . . 247 5P-7930 . . . . . . . . 247 5P-7956 . . . . . . . . . 49 5P-7959 . . . . . . . . . 49 5P-7968 . . . . . . . . . 48 5P-7981 . . . . . . . . 246 5P-7982 . . . . . . . . 246 5P-7983 . . . . . . . . 246 5P-7984 . . . . . . . . 246 5P-8018 . . . . . . . . 194 5P-8066 . . . . . . . . 269 5P-8077 . . . . . 281,282 5P-8113 . . . . . . . . 193 5P-8211 . . . . . . . . 269 5P-8228 . . . . . . . . 184 5P-8238 . . . . . . . . 186 5P-8358 . . . . . . . . . 44 5P-8753 . . . . . . . . 179 5P-8869 . . . . . . . . 187 5P-8874 . . . . . . . . 248 5P-8886 . . . . . . . . . 71 5P-8905 . . . . . . . . 249 5P-8934 . . . . . . . . 176 5P-8998 . . . . . . . . 172 5P-9097 . . . . . . . . 188 5P-9172 . . . . . . . . 189 5P-9385 . . . . . . . . 179 5P-9431 . . . . . . . . 202 5P-9436 . . . . . . . . 263 5P-9464 . . . . . . . . 183 5P-9593 . . . . . . . . . 66 5P-9617 . . . . . . . . 248 5P-9757 . . . . . . . . 270 5P-9789 . . . . . . . . 184
Part No.
Page No.
5P-9808 . . . . . . . . 196 5P-9956 . . . . . . . . . 66 5P-9973 . . . . . . . . 189 5R-5107. . . . . . . . 191 5R-5708. . . . . . . . 195 5R-6952. . . . . . . . 251 5R-8781. . . . . . . . 183 5R-8782. . . . . . . . 184 5R-8883. . . . . . . . 189 5R-8894. . . . . . . . 183 5R-9235. . . . . . . . 182 5S-2105 . . . . . . . . . 65 5S-2108 . . . . . . . . . 87 5S-2403 . . . . . . . . 172 5S-2420 . . . . . . . . . 62 5S-2907 . . . . . . . . . 63 5S-3454 . . . . . . . . . 65 5S-3777 . . . . . . . . . 65 5S-3778 . . . . . . . . . 64 5S-3779 . . . . . . . . . 63 5S-3784 . . . . . . . . . 63 5S-3788 . . . . . . . . . 65 5S-3808 . . . . . . . . . 86 5S-3811 . . . . . . . . . 65 5S-3820 . . . . . . . . . 65 5S-3826 . . . . . . . . . 65 5S-3832 . . . . . . . . . 65 5S-3836 . . . . . . . . . 66 5S-3842 . . . . . . . . . 65 5S-7382 . . . . . . . . 278 5S-7383 . . . . . . . . 281 5S-9590 . . . . . . . . . 63 5S-9591 . . . . . . . . . 64 5S-9592 . . . . . . . . . 64 5S-9593 . . . . . . . . . 65 5S-9614 . . . . . . . . . 64 5S-9615 . . . . . . . . . 64 5S-9616 . . . . . . . . . 65 5S-9638 . . . . . . . . . 65 5S-9939 . . . . . . . . . 86 5T-2119 . . . . . . . . 194 5W-1636 . . . . . . . 121 5W-1638 . . . . . . . 121 5W-1639 . . . . . . . 121 5W-1640 . . . . . . . 121 5W-1642 . . . . . . . 121 5W-1644 . . . . . . . 121 5W-1647 . . . . . . . 121 5W-1648 . . . . . . . 121 5W-1650 . . . . . . . 121 5W-1651 . . . . . . . 121 5W-1653 . . . . . . . 121 5W-1655 . . . . . . . 121 5W-1657 . . . . . . . 121 5W-1660 . . . . . . . 121 5W-1680 . . . . . . . 121 5W-1681 . . . . . . . 121 5W-4778 . . . . . . . 121 5W-4779 . . . . . . . 121
Part No.
Page No.
5Y-2209 . . . . . . . . 191 6B-1628 . . . . . . . . 173 6B-2982 . . . . . . . . 180 6B-3685 . . . . . . . . 177 6B-5072 . . . . . . . . 172 6B-6765 . . . . . . . . 174 6B-6766 . . . . . . . . 176 6B-7280 . . . . . . . . 173 6B-7639 . . . . . . . . 179 6B-9081 . . . . . . . . 173 6C-2293. . . . . . . . 206 6C-7913. . . . . . . . 249 6D-1891. . . . . . . . 245 6D-2784. . . . . . . . 245 6D-4095. . . . . . . . 245 6D-4492. . . . . . . . 245 6D-4529. . . . . . . . 245 6D-6018. . . . . . . . 247 6D-6081. . . . . . . . 245 6D-6489. . . . . . . . 242 6D-9961. . . . . . . . . 65 6E-3184 . . . . . . . . 249 6E-3819 . . . . . . . . 249 6E-4513 . . . . . . . . 249 6E-4514 . . . . . . . . 249 6F-0496 . . . . . . . . 180 6F-7701 . . . . . . . . 180 6F-7732 . . . . . . . . 173 6F-8856 . . . . . . . . 177 6H-4746. . . . . . . . 178 6H-8297. . . . . . . . 242 6I-6547 . . . . . . . . 178 6I-6851 . . . . . . . . 213 6I-6885 . . . . . . . . 222 6J-2680 . . . . . 76,114, 115,116,117, 270 6J-7366 . . . . . . . . 264 6K-1019 . . . . . . . . 172 6K-1972 . . . . . . . . 186 6K-3448 . . . . . . . . 197 6K-3449 . . . . . . . . 199 6K-3457 . . . . . . . . 185 6K-3458 . . . . . . . . 187 6K-3459 . . . . . . . . 185 6K-3460 . . . . . . . . 189 6K-3461 . . . . . . . . 189 6K-3607 . . . . . . . . 188 6K-3626 . . . . . . . . 189 6K-4235 . . . . . . . . 197 6K-6307 . . . . . . . . 263, 269,274 6K-6967 . . . . . . . . 172 6K-8298 . . . . . . . . 283 6K-8325 . . . . . . . . . 86 6K-8420 . . . . . . . . 254 6K-8748 . . . . . . . . 197 6K-9194 . . . . . . . . 183 6K-9354 . . . . . . . . 188
Part No.
Page No.
6L-1651 . . . . . . . . 273 6L-4382 . . . . . . . . 176 6L-5652 . . . . . . . . 172 6L-5955 . . . . . . . . 242 6L-7322 . . . . . . . . 180 6L-7611 . . . . . . . . 208 6L-9777 . . . . . . . . 186 6L-9781 . . . . . . . . 185 6L-9952 . . . . . . . . 178 6M-5652 . . . . . . . 191 6M-6853 . . . . . . . 198 6M-7476 . . . . . . . 190 6P-4975 . . . . . . . . 248 6S-2231 . . . . . . . . 203 6S-2289 . . . . . . . . 197 6S-2365 . . . . . . . . 197 6S-2898 . . . . . . . . 254 6S-2899 . . . . . . . . 197 6S-2910 . . . . . . . . 183 6S-5693 . . . . . . . . 197 6S-7744 . . . . . . . . 188 6T-6408 . . . . . 124,125 6U-0464. . . . . . . . 175 6V-0298 . . . . . . . . . 71 6V-0301 . . . . . . . . 249 6V-0394 . . . . . . . . 188 6V-0397 . . . . . . . . 279 6V-0400 . . . . . . . . 282 6V-0402 . . . . . . . . 281 6V-0404 . . . . . . . . 231, 239,271 6V-0405 . . . . . . . . 126, 139,231,235, 239,271 6V-0406 . . . . . 99,126, 139,231,232, 235,239,271 6V-0407 . . . . . 99,126, 139,231,232, 235,239,271 6V-0408 . . . . . 99,126, 231,235,238, 239,271 6V-0409 . . . . . 99,126, 231,235,238, 239,271 6V-0411 . . . . . . . . 184 6V-0416 . . . . . . . . 190 6V-0430 . . . . . . . . 185 6V-0467 . . . . . . . . 251 6V-0468 . . . . . . . . 245 6V-0472 . . . . . . . . 235 6V-0484 . . . . . . . . 251 6V-0581 . . . . . . . . 247 6V-0743 . . . . . . . . 288 6V-0744 . . . . . . . . 288 6V-0745 . . . . . . . . 288 6V-0746 . . . . . . . . 288 6V-0747 . . . . . . . . 288
379
Part Number Index Part No.
Page No.
6V-0748 . . . . . . . . 288 6V-0749 . . . . . . . . 288 6V-0752 . . . . . . . . 288 6V-0754 . . . . . . . . 288 6V-0756 . . . . . . . . 288 6V-0757 . . . . . . . . 288 6V-1074 . . . . . . . . . 48 6V-1236 . . . . . . . . . 67 6V-1240 . . . . . . . . 179 6V-1389 . . . . . . . . 185 6V-1390 . . . . . . . . 175 6V-1404 . . . . . . . . . 62 6V-1547 . . . . . . . . 193 6V-1548 . . . . . . . . 193 6V-1606 . . . . . . . . . 71 6V-1625 . . . . . . . . 253 6V-1722 . . . . . . . . 248 6V-1739 . . . . . . . . 180 6V-1846 . . . . . . . . 187 6V-1881 . . . . . . . . 174 6V-1903 . . . . . . . . 269 6V-1906 . . . . . . . . 189 6V-2376 . . . . . . . . 193 6V-2415 . . . . . . . . 190 6V-2448 . . . . . . . . . 46 6V-2481 . . . . . . . . 194 6V-2606 . . . . . . . . 248 6V-2612 . . . . . . . . 190 6V-2897 . . . . . . . . . 71 6V-3283 . . . . . . . . . 61 6V-3297 . . . . . . . . 200 6V-3305 . . . . . . . . 250 6V-3342 . . . . . . . . 174 6V-3364 . . . . . . . . . 67 6V-3502 . . . . . . . . . 61 6V-3504 . . . . . . . . 162 6V-3510 . . . . . . . . 248 6V-3521 . . . . . . . . 231 6V-3522 . . . . . . . . 231 6V-3523 . . . . . . . . 231 6V-3524 . . . . . . . . 231 6V-3525 . . . . . . . . 231 6V-3526 . . . . . . . . 231 6V-3527 . . . . . . . . 231 6V-3528 . . . . . . . . 231 6V-3529 . . . . . . . . 231 6V-3530 . . . . . . . . 179 6V-4245 . . . . . . . . 174 6V-4362 . . . . . . . . 189 6V-4363 . . . . . . . . 246 6V-4368 . . . . . . . . 269 6V-4373 . . . . . . . . 234 6V-4374 . . . . . . . . 234 6V-4375 . . . . . . . . 234 6V-4376 . . . . . . . . 234 6V-4377 . . . . . . . . 234 6V-4378 . . . . . . . . 234 6V-4379 . . . . . . . . 234 6V-4380 . . . . . . . . 234
380
Part No.
Page No.
6V-4381 . . . . . . . . 234 6V-4382 . . . . . . . . 234 6V-4383 . . . . . . . . 234 6V-4384 . . . . . . . . 234 6V-4385 . . . . . . . . 234 6V-4386 . . . . . . . . 234 6V-4387 . . . . . . . . 233 6V-4388 . . . . . . . . 233 6V-4389 . . . . . . . . 233 6V-4390 . . . . . . . . 233 6V-4391 . . . . . . . . 233 6V-4392 . . . . . . . . 233 6V-4393 . . . . . . . . 233 6V-4394 . . . . . . . . 233 6V-4395 . . . . . . . . 234 6V-4396 . . . . . . . . 234 6V-4397 . . . . . . . . 234 6V-4398 . . . . . . . . 234 6V-4399 . . . . . . . . 234 6V-4400 . . . . . . . . 234 6V-4401 . . . . . . . . 234 6V-4402 . . . . . . . . 234 6V-4403 . . . . . . . . 234 6V-4404 . . . . . . . . 234 6V-4405 . . . . . . . . 234 6V-4406 . . . . . . . . 234 6V-4407 . . . . . . . . 234 6V-4408 . . . . . . . . 234 6V-4409 . . . . . . . . 234 6V-4410 . . . . . . . . 234 6V-4411 . . . . . . . . 234 6V-4412 . . . . . . . . 234 6V-4461 . . . . . . . . . 60 6V-4589 . . . . . . . . 269 6V-4651 . . . . . . . . . 62 6V-4652 . . . . . . . . . 62 6V-4653 . . . . . . . . . 62 6V-4654 . . . . . . . . . 86 6V-4655 . . . . . . . . . 62 6V-4656 . . . . . . . . . 60 6V-4657 . . . . . . . . . 60 6V-4658 . . . . . . . . . 63 6V-4659 . . . . . . . . . 63 6V-4661 . . . . . . . . . 63 6V-4662 . . . . . . . . . 63 6V-4663 . . . . . . . . . 86 6V-4664 . . . . . . . . . 64 6V-4665 . . . . . . . . . 64 6V-4666 . . . . . . . . . 61 6V-4668 . . . . . . . . . 64 6V-4669 . . . . . . . . . 64 6V-4670 . . . . . . . . . 61 6V-4671 . . . . . . . . . 64 6V-4672 . . . . . . . . . 64 6V-4673 . . . . . . . . . 64 6V-4674 . . . . . . . . . 86 6V-4675 . . . . . . . . . 65 6V-4676 . . . . . . . . . 65 6V-4677 . . . . . . . . . 65
Part No.
Page No.
6V-4678 . . . . . . . . . 62 6V-4679 . . . . . . . . . 65 6V-4680 . . . . . . . . . 62 6V-4681 . . . . . . . . . 65 6V-4682 . . . . . . . . . 65 6V-4683 . . . . . . . . . 87 6V-4684 . . . . . . . . . 88 6V-4685 . . . . . . . . . 66 6V-4686 . . . . . . . . . 66 6V-4687 . . . . . . . . . 66 6V-4688 . . . . . . . . . 67 6V-4689 . . . . . . . . . 70 6V-4690 . . . . . . . . . 71 6V-5048 . . . . . . . . 269 6V-5049 . . . . . . . . 269 6V-5050 . . . . . . . . 269 6V-5258 . . . . . . . . 248 6V-5320 . . . . . . . . 251 6V-5535 . . . . . . . . 198 6V-5782 . . . . . . . . 278 6V-5858 . . . . . . . . 136 6V-6222 . . . . . . . . 137 6V-6560 . . . . . . . . 239, 271,275 6V-6760 . . . . . . . . 178 6V-6868 . . . . . . . . 192 6V-6967 . . . . . . . . 202 6V-7327 . . . . . . . . 269 6V-7328 . . . . . . . . 269 6V-7329 . . . . . . . . 269 6V-7330 . . . . . . . . 269 6V-7331 . . . . . . . . 269 6V-7332 . . . . . . . . 269 6V-7333 . . . . . . . . 269 6V-7483 . . . . . . . . 178 6V-7484 . . . . . . . . 184 6V-7485 . . . . . . . . 200 6V-7494 . . . . . . . . 260 6V-7496 . . . . . . . . 260 6V-7535 . . . . . . . . 173 6V-7538 . . . . . . . . 176 6V-7622 . . . . . . . . 232 6V-7623 . . . . . . . . 232 6V-7624 . . . . . . . . 232 6V-7625 . . . . . . . . 232 6V-7626 . . . . . . . . 232 6V-7627 . . . . . . . . 232 6V-7628 . . . . . . . . 232 6V-7629 . . . . . . . . 232 6V-7630 . . . . . . . . 232 6V-7970 . . . . . . . . 239, 271,275 6V-8076 . . . . . . . . 250 6V-8077 . . . . . . . . 249 6V-8104 . . . . . . . . 196
Part No.
Page No.
6V-8397 . . . . . . 39,40, 69,70,80,81,82, 96,97,118,119, 120,137,138, 147,148,158, 270,274,275 6V-8398 . . . . . . 39,40, 69,70,80,81,82, 96,97,118,119, 120,137,138, 147,148,158, 270,274,275 6V-8400 . . . . . . 55,69, 70,80,81,118, 119,120,121, 270,274,275 6V-8490 . . . . . . . . . 82 6V-8549 . . . . . . . . 246 6V-8552 . . . . . . . . 255 6V-8553 . . . . . . . . 255 6V-8554 . . . . . 205,255 6V-8555 . . . . . 205,255 6V-8556 . . . . . 205,255 6V-8557 . . . . . 205,255 6V-8558 . . . . . 205,255 6V-8624 . . . . . . . . 211 6V-8625 . . . . . . . . 212 6V-8626 . . . . . . . . 212 6V-8627 . . . . . . . . 212 6V-8628 . . . . . . . . 212 6V-8629 . . . . . . . . 212 6V-8632 . . . . . . . . 209 6V-8633 . . . . . . . . 209 6V-8634 . . . . . . . . 209 6V-8635 . . . . . . . . 211 6V-8636 . . . . . . . . 209 6V-8637 . . . . . . . . 210 6V-8638 . . . . . . . . 209 6V-8639 . . . . . . . . 209 6V-8640 . . . . . . . . 210 6V-8641 . . . . . . . . 208 6V-8642 . . . . . . . . 210 6V-8647 . . . . . . . . 208 6V-8649 . . . . . . . . 187 6V-8713 . . . . . . . . 210 6V-8714 . . . . . . . . 210 6V-8715 . . . . . . . . 209 6V-8716 . . . . . . . . 210 6V-8721 . . . . . . . . 212 6V-8722 . . . . . . . . 212 6V-8723 . . . . . . . . 212 6V-8724 . . . . . . . . 212 6V-8729 . . . . . . . . 204 6V-8730 . . . . . . . . 204 6V-8731 . . . . . . . . 204 6V-8732 . . . . . . . . 204 6V-8733 . . . . . . . . 204 6V-8734 . . . . . . . . 204 6V-8736 . . . . . . . . 204
Part No.
Page No.
6V-8737 . . . . . . . . 6V-8738 . . . . . . . . 6V-8739 . . . . . . . . 6V-8740 . . . . . . . . 6V-8741 . . . . . . . . 6V-8762 . . . . . . . . 6V-8773 . . . . . . . . 6V-8774 . . . . . . . . 6V-8775 . . . . . . . . 6V-8776 . . . . . . . . 6V-8777 . . . . . . . . 6V-8778 . . . . . . . . 6V-8780 . . . . . . . . 6V-8781 . . . . . . . . 6V-8782 . . . . . . . . 6V-8783 . . . . . . . . 6V-8784 . . . . . . . . 6V-8785 . . . . . . . . 6V-8786 . . . . . . . . 6V-8787 . . . . . . . . 6V-8788 . . . . . . . . 6V-8789 . . . . . . . . 6V-8790 . . . . . . . . 6V-8791 . . . . . . . . 6V-8792 . . . . . . . . 6V-8843 . . . . . . . . 6V-8856 . . . . . . . . 6V-8857 . . . . . . . . 6V-8918 . . . . . . . . 6V-8925 . . . . . . . . 6V-8926 . . . . . . . . 6V-8934 . . . . . . . . 6V-8935 . . . . . . . . 6V-8936 . . . . . . . . 6V-8937 . . . . . . . . 6V-8938 . . . . . . . . 6V-8939 . . . . . . . . 6V-8940 . . . . . . . . 6V-8941 . . . . . . . . 6V-8942 . . . . . . . . 6V-8943 . . . . . . . . 6V-8944 . . . . . . . . 6V-8945 . . . . . . . . 6V-8946 . . . . . . . . 6V-8947 . . . . . . . . 6V-8948 . . . . . . . . 6V-8979 . . . . . . . . 6V-8980 . . . . . . . . 6V-8981 . . . . . . . . 6V-8982 . . . . . . . . 6V-8983 . . . . . . . . 6V-8984 . . . . . . . . 6V-8985 . . . . . . . . 6V-8986 . . . . . . . . 6V-8987 . . . . . . . . 6V-8988 . . . . . . . . 6V-8989 . . . . . . . . 6V-8990 . . . . . . . . 6V-8991 . . . . . . . .
204 204 204 204 204 182 226 226 226 226 227 227 222 222 222 222 222 222 222 221 221 221 221 221 221 168 189 189 280 188 239 206 205 206 205 205 205 205 205 205 206 205 205 206 205 206 216 216 216 216 216 216 216 216 216 216 216 216 216
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
6V-8993 . . . . . . . . 215 6V-8994 . . . . . . . . 215 6V-8995 . . . . . . . . 215 6V-8996 . . . . . . . . 215 6V-8997 . . . . . . . . 215 6V-8998 . . . . . . . . 215 6V-9000 . . . . . . . . 211 6V-9001 . . . . . . . . 211 6V-9002 . . . . . . . . 211 6V-9003 . . . . . . . . 211 6V-9004 . . . . . . . . 212 6V-9005 . . . . . . . . 212 6V-9006 . . . . . . . . 212 6V-9007 . . . . . . . . 213 6V-9008 . . . . . . . . 213 6V-9009 . . . . . . . . 213 6V-9010 . . . . . . . . 208 6V-9012 . . . . . . . . 184 6V-9013 . . . . . . . . 244 6V-9028 . . . . . . . . 239, 271,275 6V-9031 . . . . . . . . 221 6V-9032 . . . . . . . . 222 6V-9039 . . . . . . . . 200 6V-9043 . . . . . . . . 221 6V-9152 . . . . . . . . 188 6V-9158 . . . . . . . . 221 6V-9160 . . . . . . . . 223 6V-9161 . . . . . . . . 222 6V-9162 . . . . . . . . 210 6V-9168 . . . . . . . . 255 6V-9169 . . . . . . . . 255 6V-9170 . . . . . . . . 255 6V-9172 . . . . . . . . 255 6V-9173 . . . . . . . . 255 6V-9175 . . . . . . . . 222 6V-9182 . . . . . . . . 213 6V-9200 . . . . . . . . 212 6V-9272 . . . . . . . . 221 6V-9343 . . . . . . . . 212 6V-9350 . . . . . . . . 222 6V-9351 . . . . . . . . 216 6V-9352 . . . . . . . . 222 6V-9353 . . . . . . . . 215 6V-9489 . . . . . . . . 222 6V-9507 . . . . . . . . 262 6V-9508 . . . . . . . . 262 6V-9509 . . . . . . . . 262 6V-9510 . . . . . . . . 262 6V-9511 . . . . . . . . 262 6V-9512 . . . . . . . . 262 6V-9513 . . . . . . . . 262 6V-9586 . . . . . . . . 137 6V-9587 . . . . . . . . 137 6V-9588 . . . . . . . . 137 6V-9589 . . . . . . . . 137 6V-9590 . . . . . . . . 138 6V-9591 . . . . . . . . 138 6V-9592 . . . . . . . . 138
2006-02-28 16:22:25.0
Part No.
Page No.
6V-9593 . . . . . . . . 138 6V-9594 . . . . . . . . 138 6V-9595 . . . . . . . . 138 6V-9596 . . . . . . . . 138 6V-9597 . . . . . . . . 138 6V-9598 . . . . . . . . 138 6V-9599 . . . . . . . . 138 6V-9600 . . . . . . . . 138 6V-9649 . . . . . . . . 204 6V-9746 . . . . . . 35,39, 40,50,51,55,56, 69,70,80,81,82, 96,97,118,119, 120,137,138, 158,270,274, 275 6V-9796 . . . . . . . . 216 6V-9806 . . . . . . . . 204 6V-9807 . . . . . . . . 204 6V-9808 . . . . . . . . 204 6V-9809 . . . . . . . . 204 6V-9810 . . . . . . . . 204 6V-9828 . . . . . . . . 265 6V-9829 . . . . . . . . 265 6V-9830 . . . . . . . . 265 6V-9831 . . . . . . . . 265 6V-9832 . . . . . . . . 265 6V-9833 . . . . . . . . 265 6V-9834 . . . . . . . . 265 6V-9835 . . . . . . . . 221 6V-9836 . . . . . . . . 221 6V-9837 . . . . . . . . 221 6V-9838 . . . . . . . . 221 6V-9839 . . . . . . . . 221 6V-9840 . . . . . . . . 221 6V-9842 . . . . . . . . 224 6V-9843 . . . . . . . . 224 6V-9844 . . . . . . . . 224 6V-9845 . . . . . . . . 224 6V-9846 . . . . . . . . 224 6V-9847 . . . . . . . . 224 6V-9849 . . . . . . . . 205 6V-9850 . . . . . . . . 205 6V-9851 . . . . . . . . 205 6V-9852 . . . . . . . . 205 6V-9853 . . . . . . . . 205 6V-9854 . . . . . . . . 205 6V-9855 . . . . . . . . 205 6V-9872 . . . . . . . . 208 6V-9873 . . . . . . . . 209 6V-9874 . . . . . . . . 210 6V-9875 . . . . . . . . 211 6V-9876 . . . . . . . . 211 6V-9877 . . . . . . . . 212 6V-9932 . . . . . . . . . 74 6V-9933 . . . . . . . . . 74 6V-9934 . . . . . . . . . 74 6V-9935 . . . . . . . . . 74 6V-9936 . . . . . . . . . 74
Part No.
Page No.
6V-9937 . . . . . . . . . 74 6V-9938 . . . . . . . . . 74 6V-9939 . . . . . . . . . 74 6V-9945 . . . . . . . . . 69 6V-9946 . . . . . . . . . 69 6V-9947 . . . . . . . . . 70 6V-9948 . . . . . . . . . 70 6V-9949 . . . . . . . . . 69 6V-9950 . . . . . . . . . 69 6V-9951 . . . . . . . . . 70 6V-9952 . . . . . . . . . 70 6V-9953 . . . . . . . . . 69 6V-9954 . . . . . . . . . 69 6V-9955 . . . . . . . . . 70 6V-9956 . . . . . . . . . 70 6V-9957 . . . . . . . . . 69 6V-9958 . . . . . . . . . 69 6V-9959 . . . . . . . . . 70 6V-9960 . . . . . . . . . 70 6V-9961 . . . . . . . . . 80 6V-9962 . . . . . . . . . 81 6V-9963 . . . . . . . . . 82 6V-9964 . . . . . . . . . 82 6V-9965 . . . . . . . . . 80 6V-9966 . . . . . . . . . 81 6V-9967 . . . . . . . . . 82 6V-9968 . . . . . . . . . 82 6V-9969 . . . . . . . . . 80 6V-9970 . . . . . . . . . 81 6V-9971 . . . . . . . . . 82 6V-9972 . . . . . . . . . 82 6V-9973 . . . . . . . . . 80 6V-9974 . . . . . . . . . 81 6V-9975 . . . . . . . . . 82 6V-9976 . . . . . . . . . 82 6V-9994 . . . . . . . . . 50 6V-9996 . . . . . . . . 190 6Y-0567 . . . . . . . . 249 6Y-2349 . . . . . . . . 251 7B-0192 . . . . . . . . 181 7B-1480 . . . . . . . . 176 7B-2176 . . . . . . . . 173 7B-3395 . . . . . . . . 177 7B-7138 . . . . . . . . 174 7B-8057 . . . . . . . . 174 7D-0215. . . . . . . . 243 7D-0477. . . . . . . . 243 7D-0702. . . . . . . . 242 7D-0978. . . . . . . . 197 7D-2746. . . . . . . . 173 7D-4903. . . . . . . . 173 7D-5318. . . . . . . . 189 7D-5363. . . . . . . . 185 7D-5657. . . . . . . . 182 7D-8793. . . . . . . . 186 7D-9984. . . . . . . . 190 7E-1456 . . . . . . . . 189 7E-7264 . . . . . . . . 210 7E-8716 . . . . . . . . 260
Part No.
Page No.
7E-9898 . . . . . . . . 209 7F-2050 . . . . . . . . 254 7F-2060 . . . . . . . . 254 7F-7651 . . . . . . . . 177 7F-7652 . . . . . . . . 176 7F-7807 . . . . . . . . 243 7G-4334 . . . . . . . 182 7I-0048 . . . . . . . . 210 7I-1036 . . . . . . . . 220 7I-1055 . . . . . . . . 210 7I-1284 . . . . . . . . 210 7I-2022 . . . . . . . . 188 7I-7412 . . . . . . . . 206 7I-7413 . . . . . . . . 206 7I-8310 . . . . . . . . 220 7I-8331 . . . . . . . . 233 7I-8663 . . . . . . . . 208 7J-0204 . . . . . . . . 263, 269,273 7J-0482 . . . . . . . . 174 7J-4026 . . . . . . . . 190 7J-5614 . . . . . . . . 183 7J-5996 . . . . . . . . 246 7J-6418 . . . . . . . . 182 7J-6419 . . . . . . . . 192 7J-6420 . . . . . . . . 186 7J-6742 . . . . . . . . 203 7J-7187 . . . . . . . . 189 7J-8611 . . . . . . . . 174 7J-9108 . . . . . . 39,40, 69,70,80,81,82, 96,97,118,119, 120,137,138, 158,270,274, 275 7K-2094 . . . . . . . . 243 7K-2521 . . . . . . . . 182 7K-3030 . . . . . . . . 186 7K-3324 . . . . . . . . 183 7K-3762 . . . . . . . . 187 7K-4128 . . . . . . . . 199 7K-4129 . . . . . . . . 182 7K-6462 . . . . . . . . 193 7K-9197 . . . . . . . . 183 7L-7262 . . . . . . . . 186 7L-7280 . . . . . . . . 245 7L-8074 . . . . . . . . 176 7M-8485 . . . . . . . 109, 263,269,274 7R-0042. . . . . . . . 219 7S-0570 . . . . . . . . . 62 7S-0571 . . . . . . . . . 63 7S-0572 . . . . . . . . . 63 7S-0573 . . . . . . . . . 64 7S-0574 . . . . . . . . . 64 7S-0575 . . . . . . . . . 65 7S-0577 . . . . . . . . . 65 7S-0592 . . . . . . . . . 86 7S-0614 . . . . . . . . . 86
Part No.
Page No.
7S-0631 . . . . . . . . . 86 7S-0685 . . . . . . . . . 86 7S-1074 . . . . . . . . . 86 7S-1150 . . . . . . . . . 87 7S-1212 . . . . . . . . . 87 7S-1217 . . . . . . . . . 87 7S-1707 . . . . . . . . . 66 7S-1720 . . . . . . . . . 66 7S-1761 . . . . . . . . . 66 7S-1809 . . . . . . . . . 86 7S-1851 . . . . . . . . . 87 7S-2175 . . . . . . . . . 65 7S-2369 . . . . . . . . . 60 7S-2371 . . . . . . . . . 60 7S-3122 . . . . . . . . . 65 7S-3611 . . . . . . . . . 64 7S-4078 . . . . . . . . . 64 7S-4105 . . . . . . . . . 65 7S-5064 . . . . . . . . . 65 7S-5450 . . . . . . . . . 67 7S-8439 . . . . . . . . . 66 7S-8440 . . . . . . . . . 64 7S-9370 . . . . . . . . . 63 7T-0506 . . . . . 123,270 7T-0508 . . . . . . 98,99, 124,125,271 7U-9582. . . . . . . . 237 7V-7502 . . . . . . . . 240 7W-7381 . . . . . . . 248 7X-0347 . . . . . . . . 280 7X-0492 . . . . . . . . 208 7X-0797 . . . . . . . . 224 7X-0820 . . . . . . . . 222 7X-0838 . . . . . . . . 226 7X-0871 . . . . . . . . 227 7X-0872 . . . . . . . . 227 7X-0873 . . . . . . . . 227 7X-0901 . . . . . . . . 212 7X-0902 . . . . . . . . 252 7X-1431 . . . . . . . . . 46 7X-1437 . . . . . . . . . 55 7X-1441 . . . . . . . . . 55 7X-1451 . . . . . . . . . 50 7X-1452 . . . . . . . . . 50 7X-1463 . . . . . . . . 158 7X-1467 . . . . . . . . . 50 7X-1468 . . . . . . . . . 51 7X-1469 . . . . . . . . . 51 7X-1478 . . . . . . . . . 50 7X-1800 . . . . . . . . 161 7X-1801 . . . . . . . . 161 7X-1802 . . . . . . . . 161 7X-1803 . . . . . . . . 162 7X-1804 . . . . . . . . 162 7X-1805 . . . . . . . . 162 7X-1806 . . . . . . . . 162 7X-1807 . . . . . . . . 162 7X-1808 . . . . . . . . 162 7X-1809 . . . . . . . . 162
381
Part Number Index Part No.
Page No.
7X-1810 . . . . . . . . 162 7X-1811 . . . . . . . . 162 7X-1812 . . . . . . . . 164 7X-1813 . . . . . . . . 164 7X-1814 . . . . . . . . 164 7X-1815 . . . . . . . . 163 7X-1816 . . . . . . . . 163 7X-1817 . . . . . . . . 163 7X-1818 . . . . . . . . 161 7X-1819 . . . . . . . . 161 7X-1820 . . . . . . . . 161 7X-1821 . . . . . . . . 161 7X-1822 . . . . . . . . 161 7X-1823 . . . . . . . . 161 7X-1824 . . . . . . . . 161 7X-1825 . . . . . . . . 161 7X-1826 . . . . . . . . 161 7X-1887 . . . . . . . . 165 7X-1888 . . . . . . . . 162 7X-1889 . . . . . . . . 165 7X-2429 . . . . . . . . 221 7X-2430 . . . . . . . . 250 7X-2432 . . . . . . . . 238 7X-2441 . . . . . . . . 208 7X-2444 . . . . . . . . 227 7X-2459 . . . . . . . . 228 7X-2463 . . . . . . . . 228 7X-2464 . . . . . . . . 215 7X-2470 . . . . . . . . 249 7X-2608 . . . . . . . . 250 7X-2610 . . . . . . . . 232 7X-2611 . . . . . . . . 232 7X-2612 . . . . . . . . 238 7X-3162 . . . . . . . . 220 7X-3163 . . . . . . . . 220 7X-3164 . . . . . . . . 220 7X-3165 . . . . . . . . 220 7X-3166 . . . . . . . . 220 7X-3167 . . . . . . . . 220 7X-3406 . . . . . . . . 229 7X-4811 . . . . . . . . . 56 7X-4812 . . . . . . . . . 56 7X-4813 . . . . . . . . . 56 7X-4814 . . . . . . . . . 50 7X-4815 . . . . . . . . . 51 7X-4816 . . . . . . . . . 51 7X-4817 . . . . . . . . . 56 7X-4818 . . . . . . . . . 56 7X-4819 . . . . . . . . . 56 7X-4823 . . . . . . . . . 77 7X-5331 . . . . . . . . 208 7X-7678 . . . . . . . . 189 7X-7686 . . . . . . . . 184 7X-7702 . . . . . . . . 288 7X-7703 . . . . . . . . 221 7X-7705 . . . . . . . . 178 7X-7715 . . . . . . . . 221 7X-7893 . . . . . . . . 169 7X-7894 . . . . . . . . 169
382
Part No.
Page No.
7X-7895 . . . . . . . . 168 7X-7902 . . . . . . . . 208 7X-7904 . . . . . . . . 182 7X-7934 . . . . . . . . 208 7X-7945 . . . . . . . . 217 7X-9733 . . . . . . . . 215 7X-9737 . . . . . . . . 214 7X-9738 . . . . . . . . 215 7Y-3729 . . . . . . . . 214 7Y-3730 . . . . . . . . 214 7Y-3731 . . . . . . . . 214 7Y-8419 . . . . . . . . 248 8B-1261 . . . . . . . . 180 8B-1931 . . . . . . . . 172 8B-2664 . . . . . . . . 173 8B-2777 . . . . . . . . 174 8B-4884 . . . . . . . . 176 8B-6021 . . . . . . . . 172 8B-9579 . . . . . . . . 180 8B-9913 . . . . . . . . 177 8C-0569. . . . . . . . 228 8C-2927. . . . . . . . 195 8C-2948. . . . . . . . 202 8C-3051. . . . . . . . 249 8C-3076. . . . . . . . 271 8C-3077. . . . . . . . 269 8C-3120. . . . . . . . 252 8C-3178. . . . . . . . 251 8C-3205. . . . . . . . 279 8C-3206. . . . . . . . 279 8C-3246. . . . . . . . 211 8C-3251. . . . . . . . 216 8C-3309. . . . . . . . 223 8C-3322. . . . . . . . 226 8C-3323. . . . . . . . 211 8C-3324. . . . . . . . 212 8C-3346. . . . . . . . 180 8C-3364. . . . . . . . 213 8C-3370. . . . . . . . 210 8C-3415. . . . . . . . 228 8C-3417. . . . . . . . 213 8C-3443. . . . . . . . 211 8C-3751. . . . . . . . 213 8C-3991. . . . . . . . 177 8C-3999. . . . . . . . 194 8C-4000. . . . . . . . 210 8C-4065. . . . . . . . 195 8C-4066. . . . . . . . 203 8C-4082. . . . . . . . 228 8C-4293. . . . . . . . 178 8C-4424. . . . . . . . 263 8C-5063. . . . . . . . 288 8C-5064. . . . . . . . 288 8C-5234. . . . . . . . . 46 8C-5723. . . . . . . . 211 8C-6444. . . . . . . . 222 8C-6504. . . . . 99,126, 139,231,271 8C-6515. . . . . . . . 228
Part No.
Page No.
8C-6712. . . . . . . . 250 8C-6713. . . . . . . . 184 8C-6758. . . . . . . . 209 8C-6781. . . . . . . . 235 8C-6798. . . . . . . . 227 8C-6857. . . . . 280,281 8C-6865. . . . . . . . 207 8C-6866. . . . . . . . 207 8C-6867. . . . . . . . 207 8C-6868. . . . . . . . 207 8C-6869. . . . . . . . 207 8C-6870. . . . . . . . 207 8C-6871. . . . . . . . 207 8C-6872. . . . . . . . 207 8C-6873. . . . . . . . 207 8C-6874. . . . . . . . 207 8C-6875. . . . . . . . 207 8C-6877. . . . . 280,281 8C-6905. . . . . . . . 172 8C-6915. . . . . . . . 217 8C-6920. . . . . . . . 211 8C-7304. . . . . . . . 169 8C-7306. . . . . . . . 206 8C-7307. . . . . . . . 206 8C-7308. . . . . . . . 206 8C-7309. . . . . . . . 219 8C-7310. . . . . . . . 219 8C-7311. . . . . . . . 219 8C-7312. . . . . . . . 219 8C-7313. . . . . . . . 219 8C-7325. . . . . . . . 248 8C-7334. . . . . . . . 219 8C-7335. . . . . . . . 219 8C-7514. . . . . . . . 228 8C-7557. . . . . . . . 288 8C-7563. . . . . . . . 204 8C-7566. . . . . . . . 177 8C-7574. . . . . . . . 172 8C-7575. . . . . . . . 172 8C-7576. . . . . . . . 172 8C-8400. . . . . . . . 213 8C-8408. . . . . . . . 204 8C-8410. . . . . . . . 248 8C-8417. . . . . . . . 210 8C-8431. . . . . . . . 253 8C-8493. . . . . . . . 215 8C-8498. . . . . . . . 210 8C-8552. . . . . . . . 194 8C-8553. . . . . . . . 194 8C-8762. . . . . . . . 205 8C-8807. . . . . . . . 211 8C-8835. . . . . . . . 217 8C-8889. . . . . . . . 210 8C-8921. . . . . . . . 194 8C-8988. . . . . . . . 204 8C-8989. . . . . . . . 204 8C-9026. . . . . . . . 251 8C-9028. . . . . . . . 251 8C-9029. . . . . . . . 251
Part No.
Page No.
8D-0071. . . . . . . . 199 8D-7276. . . . . . . . 245 8D-8428. . . . . . . . 249 8D-9088. . . . . . . . 188 8D-9448. . . . . . . . 175 8F-0884 . . . . . . . . 180 8F-2393 . . . . . . . . 180 8F-3271 . . . . . . . . 176 8F-8306 . . . . . . . . 173 8F-9055 . . . . . . . . 176 8I-1021 . . . . . . . . 229 8I-1022 . . . . . . . . 221 8I-1362 . . . . . . . . 168 8I-3633 . . . . . . . . 235 8I-6070 . . . . . . . . 236 8J-0426 . . . . . . . . 249 8J-1040 . . . . . . . . 199 8J-3031 . . . . . . . . 186 8J-3705 . . . . . . . . 245 8J-3830 . . . . . . . . 249 8J-4351 . . . . . . . . 269 8J-5914 . . . . . . . . 249 8J-6307 . . . . . . . . 249 8J-7844 . . . . . . . . 178 8J-9990 . . . . . . . . 248 8K-0802 . . . . . . . . 189 8K-0968 . . . . . . . . 190 8K-2377 . . . . . . . . 191 8K-2396 . . . . . . . . 183 8K-3520 . . . . . . . . 200 8K-4739 . . . . . . . . 248 8K-5114 . . . . . . . . . 62 8K-6686 . . . . . . . . 191 8K-6898 . . . . . . . . 196 8L-2746 . . . . . . . . 270 8L-2779 . . . . . . . . 270 8L-2786 . . . . . . . . 269 8L-3161 . . . . . 183,254 8L-3282 . . . . . . . . 185 8L-5008 . . . . . . . . 173 8L-6005 . . . . . . . . 179 8L-6557 . . . . . . . . 185 8L-7971 . . . . . . . . 181 8L-9137 . . . . . . . . 264 8M-0505 . . . . . . . 188 8M-0506 . . . . . . . 188 8M-0547 . . . . . . . 183 8M-0744 . . . . 184,254 8M-0745 . . . . . . . 184 8M-0755 . . . . . . . 185 8M-0792 . . . . . . . 243 8M-4389 . . . . . . . 273 8M-4390 . . . . 269,273 8M-4432 . . . . . . . 273 8M-4435 . . . . 269,273 8M-4436 . . . . 269,273 8M-4437 . . . . . . . 273 8M-4438 . . . . . . . 273 8M-4443 . . . . 269,273
Part No.
Page No.
8M-4445 . . . . 269,273 8M-4446 . . . . . . . 273 8M-4986 . . . . 269,273 8M-4987 . . . . 269,273 8M-4988 . . . . 269,273 8M-4990 . . . . . . . 273 8M-4991 . . . . . . . 273 8M-4992 . . . . . . . 273 8M-5010 . . . . 269,273 8M-5248 . . . . . . . 273 8M-5249 . . . . 269,273 8M-5252 . . . . . . . 273 8M-5254 . . . . 269,273 8M-5661 . . . . 269,273 8M-8157 . . . . . . . 273 8M-8283 . . . . . . . 273 8M-8515 . . . . . . . 273 8N-9072. . . . . . . . 185 8S-1396 . . . . . . . . . 63 8S-3649 . . . . . . . . . 65 8S-3918 . . . . . . . . . 60 8S-4055 . . . . . . . . . 60 8S-4064 . . . . . . . . . 60 8S-4950 . . . . . . . . 264 8S-4951 . . . . . . . . 264 8S-6391 . . . . . . . . . 61 8S-6392 . . . . . . . . . 61 8S-6393 . . . . . . . . . 61 8S-6417 . . . . . . . . . 60 8S-6457 . . . . . . . . . 68 8S-6458 . . . . . . . . . 68 8S-6459 . . . . . . . . . 69 8S-7092 . . . . . . . . . 60 8S-7169 . . . . . 172,175 8S-8221 . . . . . . . . . 65 8S-8869 . . . . . . . . . 86 8S-8946 . . . . . . . . . 66 8S-8957 . . . . . . . . . 65 8S-9344 . . . . . . . . . 66 8S-9345 . . . . . . . . . 66 8S-9372 . . . . . . . . . 64 8T-0022 . . . . . . . . 232 8T-0075 . . . . . . . . 209 8T-0076 . . . . . . . . 209 8T-0077 . . . . . . . . 209 8T-0078 . . . . . . . . 210 8T-0082 . . . . . . . . 227 8T-0083 . . . . . . . . 227 8T-0119 . . . . . . . . 250 8T-0120 . . . . . . . . 211 8T-0129 . . . . . . . . 215 8T-0130 . . . . . . . . 216 8T-0131 . . . . . . . . 214 8T-0163 . . . . . . . . 201 8T-0164 . . . . . . . . 211 8T-0169 . . . . . . . . 186 8T-0195 . . . . . . . . 189 8T-0197 . . . . . . . . 210 8T-0198 . . . . . . . . 211
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
8T-0248 . . . . . . . . 221 8T-0249 . . . . . . . . 220 8T-0252 . . . . . . . . 220 8T-0315 . . . . . . 69,70, 81,82,118,119, 120,121,270, 274,275 8T-0379 . . . . . . . . 221 8T-0398 . . . . . . . . 183 8T-0403 . . . . . . . . 216 8T-0404 . . . . . . . . 212 8T-0405 . . . . . . . . 209 8T-0568 . . . . . . . . 270 8T-0636 . . . . . . . . 216 8T-0637 . . . . . . . . 201 8T-0700 . . . . . . . . 189 8T-0786 . . . . . . . . 226 8T-0788 . . . . . . . . 220 8T-1009 . . . . . . . . . 48 8T-1012 . . . . . . . . 221 8T-1120 . . . . . . . . 227 8T-1458 . . . . . . . . 264 8T-1486 . . . . . . . . 195 8T-1568 . . . . . . . . 271 8T-1576 . . . . . . . . 210 8T-1674 . . . . . . . . 228 8T-1681 . . . . . 205,255 8T-1682 . . . . . . . . 213 8T-1683 . . . . . . . . 212 8T-1684 . . . . . . . . 222 8T-1685 . . . . . . . . 222 8T-1686 . . . . . . . . 212 8T-1687 . . . . . . . . 209 8T-1710 . . . . . . . . . 80 8T-1711 . . . . . . . . . 81 8T-1712 . . . . . . . . . 82 8T-1713 . . . . . . . . . 82 8T-1715 . . . . . . . . 248 8T-1718 . . . . . . . . 205 8T-1779 . . . . . . . . 209 8T-1809 . . . . . . . . 222 8T-1810 . . . . . . . . 216 8T-1905 . . . . . . . . 212 8T-2121 . . . . . . . . 232 8T-2122 . . . . . . . . 232 8T-2123 . . . . . . . . 232 8T-2124 . . . . . . . . 232 8T-2125 . . . . . . . . 233 8T-2126 . . . . . . . . 233 8T-2127 . . . . . . . . 233 8T-2128 . . . . . . . . 233 8T-2129 . . . . . . . . 233 8T-2130 . . . . . . . . 233 8T-2131 . . . . . . . . 233 8T-2132 . . . . . . . . 233 8T-2133 . . . . . . . . 233 8T-2161 . . . . . . . . 252 8T-2218 . . . . . . . . 231 8T-2219 . . . . . . . . 233
2006-02-28 16:22:25.0
Part No.
Page No.
8T-2220 . . . . . . . . 233 8T-2270 . . . . . . . . 184 8T-2335 . . . . . . . . 220 8T-2352 . . . . . . . . 226 8T-2353 . . . . . . . . 250 8T-2362 . . . . . . . . 250 8T-2363 . . . . . . . . 221 8T-2530 . . . . . . . . 211 8T-2543 . . . . . . . . 201 8T-2556 . . . . . . . . 225 8T-2864 . . . . . . . . 197 8T-2883 . . . . . . . . 222 8T-2909 . . . . . . . . 195 8T-2917 . . . . . . . . 169 8T-3001 . . . . . . . . 220 8T-3020 . . . . . . . . 188 8T-3300 . . . . . . . . 198 8T-3311 . . . . . . . . 228 8T-3312 . . . . . . . . 228 8T-3313 . . . . . . . . 223 8T-3444 . . . . . . . . 221 8T-3491 . . . . . . . . 250 8T-3569 . . . . . . . . 193 8T-3611 . . . . . . . . 211 8T-3698 . . . . . . . . . 75 8T-3699 . . . . . . . . . 76 8T-3700 . . . . . . . . . 77 8T-3702 . . . . . . . . . 75 8T-3703 . . . . . . . . . 76 8T-3704 . . . . . . . . . 76 8T-3705 . . . . . . . . . 76 8T-3706 . . . . . . . . . 77 8T-3707 . . . . . . . . . 77 8T-3708 . . . . . . . . . 79 8T-3710 . . . . . . . . . 80 8T-3711 . . . . . . . . . 75 8T-3712 . . . . . . . . . 76 8T-3713 . . . . . . . . . 76 8T-3714 . . . . . . . . . 76 8T-3715 . . . . . . . . . 77 8T-3717 . . . . . . . . . 75 8T-3718 . . . . . . . . . 76 8T-3719 . . . . . . . . . 76 8T-3720 . . . . . . . . . 76 8T-3721 . . . . . . . . . 77 8T-3722 . . . . . . . . . 77 8T-3723 . . . . . . . . . 75 8T-3724 . . . . . . . . . 76 8T-3725 . . . . . . . . . 76 8T-3731 . . . . . . . . . 76 8T-3732 . . . . . . . . . 77 8T-3953 . . . . . . . . . 82 8T-3954 . . . . . . . . . 82 8T-3955 . . . . . . . . . 82 8T-3956 . . . . . . . . . 82 8T-4121 . . . . . 279,282 8T-4122 . . . . . . . . 280, 281,282 8T-4128 . . . . . . . . 208
Part No.
Page No.
8T-4140 . . . . . . . . 282 8T-4149 . . . . . . . . 212 8T-4182 . . . . . . . . 282 8T-4183 . . . . . . . . 279 8T-4184 . . . . . 279,282 8T-4194 . . . . . . . . 282 8T-4196 . . . . . . . . 279 8T-4223 . . . . . . . . 278, 279,280,281, 282 8T-4224 . . . . . . . . 278, 279,280 8T-4834 . . . . . . . . 227 8T-4835 . . . . . . . . 281 8T-4894 . . . . . . . . 287 8T-4896 . . . . . . . . 278, 280,281 8T-4983 . . . . . . . . 287 8T-4985 . . . . . . . . 287 8T-4986 . . . . . . . . 287 8T-4987 . . . . . . . . 287 8T-4988 . . . . . . . . 287 8T-4989 . . . . . . . . 287 8T-4990 . . . . . . . . 287 8T-4994 . . . . . 280,281 8T-5043 . . . . . . . . 209 8T-5050 . . . . . . . . 209 8T-5082 . . . . . . . . 204 8T-5360 . . . . . . . . 278, 280,281 8T-5377 . . . . . . . . 138 8T-5389 . . . . . . . . 211 8T-5429 . . . . . . . . 212 8T-5465 . . . . . . . . 216 8T-5879 . . . . . . . . 248 8T-5907 . . . . . . . . 221 8T-6338 . . . . . . . . 228 8T-6356 . . . . . . . . 222 8T-6445 . . . . . . . . 215 8T-6451 . . . . . . . . 220 8T-6453 . . . . . . . . 211 8T-6454 . . . . . . . . 225 8T-6663 . . . . . . . . 213 8T-6675 . . . . . . . . 287 8T-6684 . . . . . . . . 213 8T-6696 . . . . . . . . 226 8T-6701 . . . . . . . . 206 8T-6703 . . . . . . . . 287 8T-6725 . . . . . . . . 236 8T-6754 . . . . . . . . 211 8T-6755 . . . . . . . . 221 8T-6756 . . . . . . . . 174 8T-6776 . . . . . . . . 208 8T-6777 . . . . . . . . 204 8T-6850 . . . . . . . . 125, 239,271,275 8T-6871 . . . . . . . . 281 8T-6876 . . . . . . . . 212 8T-6895 . . . . . . . . 222
Part No.
Page No.
8T-6957 . . . . . . . . . 54 8T-6959 . . . . . . . . . 54 8T-6961 . . . . . . . . . 54 8T-6963 . . . . . . . . . 54 8T-6964 . . . . . . . . . 54 8T-6966 . . . . . . . . . 54 8T-6967 . . . . . . . . . 55 8T-6969 . . . . . . . . . 55 8T-6970 . . . . . . . . . 55 8T-6971 . . . . . . . . . 55 8T-6972 . . . . . . . . . 55 8T-6988 . . . . . . . . 208 8T-7487 . . . . . . . . 236 8T-7488 . . . . . . . . 236 8T-7489 . . . . . . . . 236 8T-7490 . . . . . . . . 236 8T-7491 . . . . . . . . 236 8T-7492 . . . . . . . . 236 8T-7493 . . . . . . . . 236 8T-7494 . . . . . . . . 237 8T-7495 . . . . . . . . 236 8T-7496 . . . . . . . . 237 8T-7497 . . . . . . . . 237 8T-7520 . . . . . . . . 222 8T-7521 . . . . . . . . 212 8T-7524 . . . . . . . . 125, 239,271,275 8T-7525 . . . . . . . . 239, 271,275 8T-7526 . . . . . . . . 239, 271,275 8T-7546 . . . . . . . . 211 8T-7547 . . . . . . . . 279 8T-7813 . . . . . . . . 213 8T-7859 . . . . . . . . 239 8T-7860 . . . . . . . . 239 8T-7861 . . . . . . . . 239 8T-7862 . . . . . . . . 239 8T-7863 . . . . . . . . 239 8T-7864 . . . . . . . . 239 8T-7865 . . . . . . . . 239 8T-7866 . . . . . . . . 239 8T-7867 . . . . . . . . 239 8T-7868 . . . . . . . . 239 8T-7876 . . . . . . . . 239, 271,275 8T-7877 . . . . . . . . 125, 239,271,275 8T-7878 . . . . . . . . 239, 271,275 8T-7908 . . . . . . . . 239 8T-7909 . . . . . . . . 239 8T-7910 . . . . . . . . 239 8T-7911 . . . . . . . . 239 8T-7912 . . . . . . . . 239 8T-7913 . . . . . . . . 239 8T-7914 . . . . . . . . 239 8T-7915 . . . . . . . . 239 8T-7916 . . . . . . . . 239
Part No.
Page No.
8T-7917 . . . . . . . . 239 8T-7926 . . . . . . . . 211 8T-7927 . . . . . . . . 211 8T-7946 . . . . . . . . 205 8T-7968 . . . . . . . . 209 8T-7970 . . . . . . . . 212 8T-7978 . . . . . . . . . 46 8T-7979 . . . . . . . . . 46 8T-7980 . . . . . . . . . 46 8T-8552 . . . . . . . . 205 8T-8887 . . . . . . . . 209 8T-8897 . . . . . . . . 238 8T-8898 . . . . . . . . 211 8T-8899 . . . . . . . . 204 8T-8900 . . . . . . . . 228 8T-8901 . . . . . . . . 223 8T-8902 . . . . . . . . 228 8T-8916 . . . . . . . . 278 8T-8919 . . . . . 278,280 8T-8983 . . . . . . . . 221 8T-8984 . . . . . . . . 226 8T-8985 . . . . . . . . 211 8T-8986 . . . . . . . . 213 8T-8987 . . . . . . . . 213 8T-9023 . . . . . . . . 210 8T-9041 . . . . . . . . 209 8T-9349 . . . . . . . . 211 8T-9357 . . . . . . . . 248 8T-9358 . . . . . . . . 213 8T-9386 . . . . . . . . 210 8T-9403 . . . . . . . . 282 8T-9543 . . . . . . . . 168 8U-1675. . . . . . . . 209 8U-6275. . . . . . . . 231 8V-7764 . . . . . . . . 249 8X-3316 . . . . . . . . 172 8X-6293 . . . . . . . . 243 8X-7851 . . . . . . . . 248 8Y-7452 . . . . . . . . 223 9B-1964 . . . . . . . . 180 9B-3523 . . . . . . . . 173 9D-0884. . . . . . . . 189 9D-3351. . . . . . . . 243 9D-3352. . . . . . . . 243 9D-9658. . . . . . . . 173 9F-2535 . . . . . . . . 174 9H-6067. . . . . . . . 273 9J-0477 . . . . . . . . 248 9J-6190 . . . . . . . . 194 9J-7600 . . . . . . . . 242 9J-8677 . . . . . . . . 249 9K-1242 . . . . . . . . 189 9K-5469 . . . . . . . . 188 9L-3560 . . . . . . . . 174 9L-4007 . . . . . . . . 187 9L-5094 . . . . . . . . 186 9L-5125 . . . . . . . . 186 9L-5254 . . . . . . . . 186 9L-8493 . . . . . . . . 264
383
Part Number Index Part No.
Page No.
9L-8868 . . . . . . . . 190 9M-0164 . . . . . . . 287 9M-4584 . . . . . . . 189 9M-4849 . . . . . . . 273 9M-5501 . . . . . . . 174 9M-6522 . . . . . . . 185 9M-6738 . . . . . . . 287 9M-7002 . . . . . . . 273 9M-7539 . . . . . . . 270 9M-7958 . . . . . . . 287 9M-7959 . . . . . . . 287 9M-9647 . . . . . . . 273 9S-0128 . . . . . . . . . 60 9S-0176 . . . . . . . . 197 9S-0177 . . . . . . . . 194 9S-0284 . . . . . . . . . 63 9S-0681 . . . . . . . . . 87 9S-2332 . . . . . . . . . 61 9S-3172 . . . . . . . . . 68 9S-3173 . . . . . . . . . 67 9S-4123 . . . . . . . . . 60 9S-4180 . . . . . . . . 263 9S-4181 . . . . . . . . 263 9S-4182 . . . . . . . . 263 9S-4183 . . . . . . . . 263 9S-4185 . . . . . . . . 263 9S-4188 . . . . . . . . 263 9S-4190 . . . . . . . . 263 9S-4191 . . . . . . . . 263 9S-5518 . . . . . . . . 262 9S-6130 . . . . . . . . 263 9S-6691 . . . . . . . . . 88 9S-7296 . . . . . . . . 187 9S-7583 . . . . . . . . 263 9S-7695 . . . . . . . . 197 9S-7739 . . . . . . . . 182 9S-7754 . . . . . . . . 182 9S-8895 . . . . . . . . 262 9S-8896 . . . . . . . . 264 9S-8927 . . . . . . . . 262 9S-9725 . . . . . . . . . 61 9S-9727 . . . . . . . . . 61 9T-0975 . . . . . . . . 248 9T-2136 . . . . . . . . 209 9T-5212 . . . . . . . . 249 9T-5466 . . . . . . . . 208 9T-6322 . . . . . . . . 263 9T-6865 . . . . . . . . 249 9T-8620 . . . . . . . . 248 9U-6992. . . . . . . . 252 9U-6993. . . . . . . . 252 9U-6994. . . . . . . . 252 9U-6995. . . . . . . . 252 9U-6996. . . . . . . . 252 9U-6997. . . . . . . . 252 9U-6998. . . . . . . . 252 9U-6999. . . . . . . . 252 9U-7000. . . . . . . . 252 9U-7067. . . . . . . . 260
384
Part No.
Page No.
9U-7068. . . . . . . . 9U-7069. . . . . . . . 9U-7070. . . . . . . . 9U-7071. . . . . . . . 9U-7072. . . . . . . . 9U-7073. . . . . . . . 9U-7074. . . . . . . . 9U-7075. . . . . . . . 9U-7076. . . . . . . . 9U-7077. . . . . . . . 9U-7078. . . . . . . . 9U-7079. . . . . . . . 9U-7080. . . . . . . . 9U-7081. . . . . . . . 9U-7082. . . . . . . . 9U-7084. . . . . . . . 9U-7085. . . . . . . . 9U-7086. . . . . . . . 9U-7087. . . . . . . . 9U-7088. . . . . . . . 9U-7089. . . . . . . . 9U-7090. . . . . . . . 9U-7091. . . . . . . . 9U-7092. . . . . . . . 9U-7094. . . . . . . . 9U-7095. . . . . . . . 9U-7096. . . . . . . . 9U-7120. . . . . . . . 9U-7121. . . . . . . . 9U-7122. . . . . . . . 9U-7123. . . . . . . . 9U-7124. . . . . . . . 9U-7125. . . . . . . . 9U-7126. . . . . . . . 9U-7127. . . . . . . . 9U-7128. . . . . . . . 9U-7129. . . . . . . . 9U-7130. . . . . . . . 9U-7131. . . . . . . . 9U-7132. . . . . . . . 9U-7133. . . . . . . . 9U-7134. . . . . . . . 9U-7135. . . . . . . . 9U-7438. . . . . . . . 9U-7439. . . . . . . . 9U-7440. . . . . . . . 9U-7441. . . . . . . . 9U-7442. . . . . . . . 9U-7443. . . . . . . . 9U-7444. . . . . . . . 9U-7445. . . . . . . . 9U-7446. . . . . . . . 9W-7785 . . . . . . . 9X-2085 . . . . . . . . 9X-2091 . . . . . . . . 9X-2101 . . . . . . . . 9X-2124 . . . . . . . . 9X-2131 . . . . . . . . 9X-2134 . . . . . . . .
260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 260 261 261 261 261 261 261 261 261 261 261 261 261 261 261 261 261 250 250 250 250 250 250 250 250 250 249 211 220 178 194 181 212
Part No.
Page No.
9X-2235 . . . . . . . . 9X-2289 . . . . . . . . 9X-2296 . . . . . . . . 9X-2297 . . . . . . . . 9X-2304 . . . . . . . . 9X-2317 . . . . . . . . 9X-2362 . . . . . . . . 9X-2363 . . . . . . . . 9X-2364 . . . . . . . . 9X-2365 . . . . . . . . 9X-2366 . . . . . . . . 9X-2367 . . . . . . . . 9X-2368 . . . . . . . . 9X-2369 . . . . . . . . 9X-2370 . . . . . . . . 9X-2371 . . . . . . . . 9X-2372 . . . . . . . . 9X-2373 . . . . . . . . 9X-2374 . . . . . . . . 9X-2375 . . . . . . . . 9X-2376 . . . . . . . . 9X-2377 . . . . . . . . 9X-2378 . . . . . . . . 9X-2379 . . . . . . . . 9X-2380 . . . . . . . . 9X-2381 . . . . . . . . 9X-2382 . . . . . . . . 9X-2383 . . . . . . . . 9X-2384 . . . . . . . . 9X-2385 . . . . . . . . 9X-2386 . . . . . . . . 9X-2387 . . . . . . . . 9X-2388 . . . . . . . . 9X-2389 . . . . . . . . 9X-2390 . . . . . . . . 9X-2398 . . . . . . . . 9X-2492 . . . . . . . . 9X-2493 . . . . . . . . 9X-2511 . . . . . . . . 9X-2512 . . . . . . . . 9X-2514 . . . . . . . . 9X-2515 . . . . . . . . 9X-2538 . . . . . . . . 9X-2541 . . . . . . . . 9X-2604 . . . . . . . . 9X-2623 . . . . . . . . 9X-2650 . . . . . . . . 9X-2847 . . . . . . . . 9X-2856 . . . . . . . . 9X-3760 . . . . . . . . 9X-3776 . . . . . . . . 9X-3780 . . . . . . . . 9X-3783 . . . . . . . . 9X-3807 . . . . . . . . 9X-3808 . . . . . . . . 9X-3809 . . . . . . . . 9X-3810 . . . . . . . . 9X-3812 . . . . . . . . 9X-3813 . . . . . . . .
221 227 180 209 209 215 152 152 152 152 152 152 152 152 152 153 153 153 153 153 153 153 153 153 134 134 134 134 134 134 134 134 160 160 160 208 223 248 200 196 178 178 218 228 178 197 248 220 288 119 120 166 162 154 154 154 154 154 154
Part No.
Page No.
9X-3814 . . . . . . . . 9X-3815 . . . . . . . . 9X-3816 . . . . . . . . 9X-3821 . . . . . . . . 9X-3823 . . . . . . . . 9X-3826 . . . . . . . . 9X-3830 . . . . . . . . 9X-3832 . . . . . . . . 9X-3840 . . . . . . . . 9X-3841 . . . . . . . . 9X-3842 . . . . . . . . 9X-3843 . . . . . . . . 9X-3844 . . . . . . . . 9X-3845 . . . . . . . . 9X-3846 . . . . . . . . 9X-3847 . . . . . . . . 9X-3848 . . . . . . . . 9X-3849 . . . . . . . . 9X-3850 . . . . . . . . 9X-3851 . . . . . . . . 9X-3852 . . . . . . . . 9X-3853 . . . . . . . . 9X-3854 . . . . . . . . 9X-3855 . . . . . . . . 9X-3857 . . . . . . . . 9X-3859 . . . . . . . . 9X-3860 . . . . . . . . 9X-3861 . . . . . . . . 9X-3863 . . . . . . . . 9X-3867 . . . . . . . . 9X-3868 . . . . . . . . 9X-3869 . . . . . . . . 9X-3870 . . . . . . . . 9X-3871 . . . . . . . . 9X-3874 . . . . . . . . 9X-3875 . . . . . . . . 9X-3876 . . . . . . . . 9X-3877 . . . . . . . . 9X-3878 . . . . . . . . 9X-3879 . . . . . . . . 9X-3880 . . . . . . . . 9X-3881 . . . . . . . . 9X-3882 . . . . . . . . 9X-3883 . . . . . . . . 9X-3884 . . . . . . . . 9X-3885 . . . . . . . . 9X-3886 . . . . . . . . 9X-3887 . . . . . . . . 9X-3888 . . . . . . . . 9X-3889 . . . . . . . . 9X-3890 . . . . . . . . 9X-3891 . . . . . . . . 9X-3892 . . . . . . . . 9X-3893 . . . . . . . . 9X-3894 . . . . . . . . 9X-3895 . . . . . . . . 9X-3896 . . . . . . . . 9X-3897 . . . . . . . . 9X-3898 . . . . . . . .
154 154 154 154 154 154 154 154 157 157 157 157 157 157 157 157 157 157 157 157 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 156 156 156 157 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158 158
Part No.
Page No.
9X-3899 . . . . . . . . 158 9X-3900 . . . . . . . . 158 9X-3901 . . . . . . . . 158 9X-3902 . . . . . . . . 158 9X-3903 . . . . . . . . 158 9X-3905 . . . . . . . . 135 9X-3906 . . . . . . . . 135 9X-3907 . . . . . . . . 135 9X-3908 . . . . . . . . 135 9X-3909 . . . . . . . . 135 9X-3910 . . . . . . . . 135 9X-3911 . . . . . . . . 135 9X-3912 . . . . . . . . 135 9X-3916 . . . . . . . . 136 9X-3917 . . . . . . . . 136 9X-3919 . . . . . . . . 136 9X-3922 . . . . . . . . 136 9X-3923 . . . . . . . . 136 9X-3924 . . . . . . . . 137 9X-3926 . . . . . . . . 137 9X-3947 . . . . . . . . 154 9X-3948 . . . . . . . . 135 9X-3949 . . . . . . . . 136 9X-3951 . . . . . . . . 136 9X-3952 . . . . . . . . 137 9X-3953 . . . . . . . . 136 9X-3954 . . . . . . . . 136 9X-3955 . . . . . . . . 137 9X-3956 . . . . . . . . 155 9X-3957 . . . . . . . . 154 9X-3960 . . . . . . . . 137 9X-4000 . . . . . . . . 161 9X-4006 . . . . . . . . 161 9X-4010 . . . . . . . . 165 9X-4011 . . . . . . . . 161 9X-4012 . . . . . . . . 164 9X-4208 . . . . . . . . 165 9X-4611 . . . . . . . . 114 9X-6015 . . . . . . . . 211 9X-6186 . . . . . . . . 288 9X-6394 . . . . . . . . 255 9X-6395 . . . . . . . . 255 9X-6550 . . . . . . . . 209 9X-6578 . . . . . . . . 254 9X-6579 . . . . . . . . 254 9X-6580 . . . . . . . . 254 9X-6581 . . . . . . . . 254 9X-6582 . . . . . . . . 254 9X-6643 . . . . . . . . 213 9X-6650 . . . . . . . . 252 9X-6653 . . . . . . . . 224 9X-6656 . . . . . . . . 210 9X-7378 . . . . . . . . 275 9X-7379 . . . . . . . . 275 9X-7380 . . . . . . . . 161, 162,166,272, 275
2006-02-28 16:22:25.0
Part Number Index Part No.
Page No.
9X-7381 . . . . . . . . 161, 162,163,166, 272,275 9X-7382 . . . . . . . . 161, 162,163,166, 272,275 9X-7383 . . . . . . . . 161, 162,163,164, 166,272,275 9X-7384 . . . . . . . . 163, 164,165,272, 275 9X-7385 . . . . . . . . 275 9X-7414 . . . . . . . . 125 9X-7423 . . . . . 99,235, 271 9X-7447 . . . . . 123,270 9X-7570 . . . . . . . . . 71 9X-7573 . . . . . . . . . 71 9X-7574 . . . . . . . . . 71 9X-7575 . . . . . . . . . 71 9X-7580 . . . . . . . . . 52 9X-7602 . . . . . . . . . 71 9X-7603 . . . . . . . . . 71 9X-7641 . . . . . . . . . 71 9X-7642 . . . . . . . . . 52 9X-7643 . . . . . . . . . 84 9X-7665 . . . . . . . . . 75 9X-7666 . . . . . . . . . 76 9X-7667 . . . . . . . . . 76 9X-7668 . . . . . . . . . 76 9X-7669 . . . . . . . . . 77 9X-7670 . . . . . . . . . 77 9X-8260 . . . . . . . . 211 9X-8264 . . . . . . . . 239 9X-8265 . . . . . . . . 239 9X-8403 . . . . . . . . 251 9X-8408 . . . . . . . . 209 9Y-2238 . . . . . . . . 178 9x-7380 . . . . . . . . 162
2006-02-28 16:22:25.0
385
Hose Products and Tooling Guide 6th Edition
CAT, CATERPILLAR, their respective logos, and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Caterpillar. The difference counts.™ PECP5030-05
© 2006 Caterpillar
Printed in USA
All Rights Reserved
View more...
Comments
