CAT C15 SPECIFICATIONS.pdf
Short Description
Download CAT C15 SPECIFICATIONS.pdf...
Description
C15 ACERT ™
403 bkW / 540 bhp
La dirección Industrial no es CATERPILLAR válida ENGINE SPECIFICATIONS
2100 rpm
La URL no I-6, 4-Stroke-Cycle Diesel es válida y Bore......................................................... 137.2 mm (5.4 in) Stroke.................................................... 171.4 mm (6.75 in) no puede Displacement.......................................... 15.2 L (927.56 in3) Aspiration................................... Turbocharged Aftercooled ser Compression Ratio....................................................... 18:1 cargada. Rotation (from flywheel end)....................Counterclockwise Weight, Net Dry (approximate kg. lb)........ 1332 kg, 2937 lb Las direcciones web Image shown may not reflect actual engine se escriben FEATURES normalmente como Full Range of Attachments Emissions http://www.ejemplo.com Meets Tier 3, Stage IIIA emission requirements. Tier 3 Wide range of bolt-on system expansion attachments, factory designed and tested. refers to EPA (U.S.) standards. Stage IIIA refers to Asegúrese European standards. de Unmatched Product Support Offered Through que Worldwide Caterpillar Dealer Network Worldwide Supplier Capability está Caterpillar More than 1,800 dealer outlets Caterpillar factory-trained dealer technicians service - Casts engine blocks, heads, cylinder liners, and usando every aspect of your industrial engine flywheel housings barras Ad of Options 99.7% parts orders filled within 24 hours worldwide - Machines critical components Ads by PlusHD.5 - Assembles complete engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repair - Factory-designed systems built at Caterpillar ISO before failure options 9001:2000 certified facilities Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition Testing - presence of unwanted fluids Prototype testing on every model: - presence of combustion by-products - proves computer design - verifies system torsional stability Web Site - functionality tests every model For all your industrial power requirements, visit www.cat-industrial.com. Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.
7 August 2006
1:31 AM
C15 ACERT ™
INDUSTRIAL ENGINE 403 bkW (540 bhp)
STANDARD ENGINE EQUIPMENT Air Inlet System ATAAC Turbocharged Control System Electronic governing PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet
Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes
Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing
Ads by PlusHD.5
2
Ad Options
7 August 2006
1:31 AM
C15 ACERT ™
INDUSTRIAL ENGINE 403 bkW (540 bhp)
PERFORMANCE CURVES IND - C (Intermittent) - DM7520-00
Torque N•m
Metric
Engine Power kW
BSFC g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100
403 403 403 403 398 390 378 362 331 268 242
Torque N•m 1832 1924 2025 2138 2236 2325 2404 2466 2434 2134 2102
Options Ads by PlusHD.5 BSFC g/kW-hr Fuel RateAd L/hr
227.7 226.5 225 223.5 222 220.8 219.7 218.7 218.1 217.3 215.9
109.4 108.8 108.1 107.4 105.3 102.5 98.9 94.2 86.1 69.5 62.3
3
7 August 2006
1:31 AM
INDUSTRIAL ENGINE
C15 ACERT ™
403 bkW (540 bhp)
RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).
Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35°API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29°C (84.2°F) with a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dimensions (1) Length (2) Width (3) Height
1381.0 mm 910.4 mm 1274.5 mm
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2579952 ).
Performance Number: DM7520-00
© 2006 Caterpillar
Feature Code: C15DI12
All rights reserved.
Materials and specifications are subject to change without notice. 7657008
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
C18 ACERT ™
470 bkW / 630 bhp 2100 rpm
Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 145.0 mm (5.71 in) Stroke...................................................... 183.0 mm (7.2 in) Displacement....................................... 18.1 L (1,104.53 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 16.3:1 Rotation (from flywheel end)....................Counterclockwise Weight, Net Dry (approximate kg. lb)....... 1332 kg (2937 lb)
Image shown may not reflect actual engine
FEATURES Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, cylinder liners, and flywheel housings - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model
Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested.
Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,800 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine Ad of Options 99.7% parts orders filled within 24 hours worldwide Ads by PlusHD.5 Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options
Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.
Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.
2 November 2006
3:13 AM
C18 ACERT ™
INDUSTRIAL ENGINE 470 bkW (630 bhp)
STANDARD ENGINE EQUIPMENT Air Inlet System Turbocharged Aftercooled -- 429-470 bkW (575-630 bhp) Twin Turbocharged Aftercooled -- 522-597 bkW (700-800 bhp) ATAAC
Control System Electronic governing PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4
Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes
Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing
Ads by PlusHD.5
2
Ad Options
2 November 2006
3:13 AM
C18 ACERT ™
INDUSTRIAL ENGINE 470 bkW (630 bhp)
PERFORMANCE CURVES IND - C (Intermittent) - DM7699-01
Torque N•m
Metric
Engine Power kW
BSFC g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100
470 470 470 470 465 455 441 422 387 309 258
Torque N•m 2137 2244 2362 2493 2611 2714 2807 2879 2842 2457 2243
Options Ads by PlusHD.5 BSFC g/kW-hr Fuel RateAd L/hr
233.8 229.9 224.5 218.9 214.5 212.5 211.4 210.7 210.3 211.3 214.4
131.0 128.8 125.8 122.6 118.8 115.2 111.1 106.0 97.0 77.8 66.0
3
2 November 2006
3:13 AM
INDUSTRIAL ENGINE
C18 ACERT ™
470 bkW (630 bhp)
RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).
Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35°API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29°C (84.2°F) with a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dimensions (1) Length (2) Width (3) Height
1388.2 mm 920.7 mm 1243.1 mm
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2588747 ).
Performance Number: DM7699-01
© 2006 Caterpillar
Feature Code: C18DI01
All rights reserved.
Materials and specifications are subject to change without notice. 8678268
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and the POWER EDGE™ trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
C18 ACERT ™
522 bkW / 700 bhp 2100 rpm
Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 145.0 mm (5.71 in) Stroke...................................................... 183.0 mm (7.2 in) Displacement....................................... 18.1 L (1,104.53 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 16.3:1 Rotation (from flywheel end)....................Counterclockwise Weight, Net Dry (approximate kg. lb)....... 1332 kg (2937 lb)
Image shown may not reflect actual engine
FEATURES Worldwide Supplier Capability Caterpillar - Casts engine blocks, heads, cylinder liners, and flywheel housings - Machines critical components - Assembles complete engine - Factory-designed systems built at Caterpillar ISO 9001:2000 certified facilities Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Testing Prototype testing on every model: - proves computer design - verifies system torsional stability - functionality tests every model
Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested.
Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network More than 1,800 dealer outlets Caterpillar factory-trained dealer technicians service every aspect of your industrial engine Ad of Options 99.7% parts orders filled within 24 hours worldwide Ads by PlusHD.5 Caterpillar parts and labor warranty Preventive maintenance agreements available for repair before failure options
Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.
Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition - presence of unwanted fluids - presence of combustion by-products Web Site For all your industrial power requirements, visit www.cat-industrial.com.
17 August 2006
6:37 AM
C18 ACERT ™
INDUSTRIAL ENGINE 522 bkW (700 bhp)
STANDARD ENGINE EQUIPMENT Air Inlet System Turbocharged Aftercooled -- 429-470 bkW (575-630 bhp) Twin Turbocharged Aftercooled -- 522-597 bkW (700-800 bhp) ATAAC
Control System Electronic governing PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4
Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes
Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing
Ads by PlusHD.5
2
Ad Options
17 August 2006
6:37 AM
C18 ACERT ™
INDUSTRIAL ENGINE 522 bkW (700 bhp)
PERFORMANCE CURVES IND - C (Intermittent) - DM7700-01
Torque N•m
Metric
Engine Power kW
BSFC g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1000
522 522 522 522 516 505 490 469 430 296
Torque N•m 2374 2493 2624 2769 2899 3014 3120 3199 3159 2822
Options Ads by PlusHD.5 BSFC g/kW-hr Fuel RateAd L/hr
228.4 224.4 221.5 219 216.6 214.2 211.9 210.2 209.4 212.6
142.1 139.6 137.8 136.3 133.3 129.0 123.8 117.5 107.4 74.9
3
17 August 2006
6:37 AM
INDUSTRIAL ENGINE
C18 ACERT ™
522 bkW (700 bhp)
RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).
Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35°API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29°C (84.2°F) with a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dimensions (1) Length (2) Width (3) Height
1409.3 mm 974.0 mm 1256.1 mm
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2621427 ).
Performance Number: DM7700-01
© 2006 Caterpillar
Feature Code: C18DI02
All rights reserved.
Materials and specifications are subject to change without notice. 7657637
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
C18 ACERT ™
448 bkW / 600 bhp 2100 rpm
Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 145.0 mm (5.71 in) Stroke...................................................... 183.0 mm (7.2 in) Displacement.............................................. 18.1 L, 1106 in³ Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 16.5:1 Rotation (from flywheel end)....................Counterclockwise Weight, Net Dry (approximate kg. lb)....... 1332 kg (2937 lb) Length................................................1388.2 mm (54.65 in) Width....................................................920.7 mm (36.25 in) Height................................................ 1243.1 mm (48.94 in) Image shown may not reflect actual engine
FEATURES Emissions Meets Tier 3, Stage IIIA emission requirements. Tier 3 refers to EPA (U.S.) standards. Stage IIIA refers to European standards.
Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested.
Unmatched Product Support Offered Through Worldwide Caterpillar Dealer Network Worldwide Supplier Capability Caterpillar More than 1,800 dealer outlets Caterpillar factory-trained dealer technicians service - Casts engine blocks, heads, cylinder liners, and every aspect of your industrial engine flywheel housings Ad of Options 99.7% parts orders filled within 24 hours worldwide - Machines critical components Ads by PlusHD.5 - Assembles complete engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repair - Factory-designed systems built at Caterpillar ISO before failure options 9001:2000 certified facilities Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable product. Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: - internal engine component condition Testing - presence of unwanted fluids Prototype testing on every model: - presence of combustion by-products - proves computer design - verifies system torsional stability Web Site - functionality tests every model For all your industrial power requirements, visit www.cat-industrial.com. Every Caterpillar engine is dynamometer tested under full load to ensure proper engine performance.
23 December 2005
2:45 AM
C18 ACERT ™
INDUSTRIAL ENGINE 448 bkW (600 bhp)
STANDARD ENGINE EQUIPMENT Air Inlet System Turbocharged Aftercooled -- 429-470 bkW (575-630 bhp) Twin Turbocharged Aftercooled -- 522-597 bkW (700-800 bhp) ATAAC
Control System Electronic governing PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4
Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes
Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing
Ads by PlusHD.5
2
Ad Options
23 December 2005
2:45 AM
C18 ACERT ™
INDUSTRIAL ENGINE 448 bkW (600 bhp)
PERFORMANCE CURVES IND - B - DM8169-00
Torque N•m
Metric
Engine Power kW
BSFC g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100
448 448 448 448 443 433 420 402 368 294 246
Torque N•m 2035 2137 2249 2374 2486 2584 2673 2742 2706 2340 2136
Options Ads by PlusHD.5 BSFC g/kW-hr Fuel RateAd L/hr
225.3 223.5 219.3 214.7 211.4 211.5 212.5 212.9 211.1 209.1 208.1
120.2 119.2 117.0 114.5 111.5 109.2 106.4 102.0 92.7 73.3 61.0
3
23 December 2005
2:45 AM
INDUSTRIAL ENGINE
C18 ACERT ™
448 bkW (600 bhp)
RATINGS AND CONDITIONS IND - B For service where power and/or speed are cyclic (time at full load not to exceed 80%).
Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35°API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29°C (84.2°F) with a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dimensions (1) Length (2) Width (3) Height
See page 1-Specifications for Dimensions
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # null ).
Performance Number: DM8169-00
© 2005 Caterpillar
Feature Code: C18DI03
All rights reserved.
Materials and specifications are subject to change without notice. 5959430
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
C27 ACERT ™
653 bkW / 875 bhp 2100 rpm
Engine CATERPILLAR ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-Stroke-Cycle Diesel Bore......................................................... 137.2 mm (5.4 in) Stroke...................................................... 152.4 mm (6.0 in) Displacement..................................... 27.03 L (1,649.47 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 16.5:1 Rotation (from flywheel end)....................Counterclockwise Weight, Net Dry (approximate kg. lb)....... 2946 kg (6495 lb)
Image shown may not reflect actual engine
FEATURES Emissions Meets Tier 2 emissions requirements. Tier 2 refers to EPA (U.S) standards.
Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested.
Unmatched Product Support Offered Through Worldwide Supplier Capability Worldwide Caterpillar Dealer Network Caterpillar MoreAd than 1,800 dealer outlets - Casts engine blocks, heads, cylinder liners, and Options Ads by PlusHD.5 Caterpillar factory-trained dealer technicians service flywheel housings - Machines critical components every aspect of your industrial engine 99.7% of parts orders filled within 24 hours worldwide - Assembles complete engine Caterpillar parts and labor warranty - Factory-designed systems built at Caterpillar ISO Preventive maintenance agreements available for repair 9001:2000 certified facilities Ownership of these manufacturing processes enables before failure options Caterpillar to produce high quality, dependable product. Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: Testing - internal engine component condition Prototype testing on every model: - presence of unwanted fluids - proves computer design - presence of combustion by-products - verifies system torsional stability - functionality tests every model Web Site For all your industrial power requirements, visit Every Caterpillar engine is dynamometer tested under www.cat-industrial.com. full load to ensure proper engine performance.
20 March 2007
5:09 AM
Engine
C27 ACERT ™
653 bkW (875 bhp)
STANDARD ENGINE EQUIPMENT Air Inlet System Turbocharged Air to Air Aftercooled Control System Electronic governing PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM™ A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet
Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT™ Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes
Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing
Ads by PlusHD.5
2
Ad Options
20 March 2007
5:09 AM
Engine
C27 ACERT ™
653 bkW (875 bhp)
PERFORMANCE CURVES IND - B - DM9038-00
Torque N•m
Metric
Engine Power kW
BSFC g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300
653 653 653 653 646 632 613 586 538
Torque N•m 2968 3117 3281 3463 3628 3771 3900 4000 3949
Options Ads by PlusHD.5 BSFC g/kW-hr Fuel RateAd L/hr
206.6 202.9 200.3 198.3 197.7 197.9 199.9 201.8 202.6
160.8 157.8 155.8 154.3 152.2 149.1 146.0 141.1 129.8
3
20 March 2007
5:09 AM
Engine
C27 ACERT ™
653 bkW (875 bhp)
RATINGS AND CONDITIONS IND - B For service where power and/or speed are cyclic (time at full load not to exceed 80%).
Engine Performance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35°API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29°C (84.2°F) with a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dimensions (1) Length (2) Width (3) Height
1917.1 mm 1464.3 mm 1320.6 mm
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2823892 ).
Performance Number: DM9038-00
© 2007 Caterpillar
Feature Code: C27DI01 Arr. Number: 2520148
All rights reserved.
Materials and specifications are subject to change without notice. 9607603
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
709 bkW / 950 bhp
C32 ACERT ™
2100 rpm
Indust rial CATERPILLAR ENGINE SPECIFICATIONS Vee 12 Cylinder, 4-St roke-Cycle Diesel Bore......................................................145.0 m m (5.71 in) Stroke...................................................162.0 m m (6.38 in) Displacem ent..................................... 32.1 L (1,958.86 in 3) Aspiration...............................Turbocharged Aftercooled Com pression Ratio...................................................16.5:1 Rotation (from flyw heel end).............. Counterclockw ise Weight, Net Dry (approxim ate kg. lb).. 2946 kg (6495 lb)
Im age show n m ay not reflect actual engine
FEATURES Em issions M eets Tier 2 em issions requirem ents. Tier 2 refers to EPA (U.S) standards.
Full Range of At t achm ent s Wide range of bolt-on system expansion attachm ents, factory designed and tested.
Unm at ched Product Support Offered Through Worldw ide Supplier Capabilit y Worldw ide Cat erpillar Dealer Net w ork Caterpillar M ore than 1,800 dealer outlets - Casts engine blocks, heads, cylinder liners, and Caterpillar factory-trained dealer technicians service flyw heel housings - M achines critical com ponents every aspect of your industrial engine Ad of Options 99.7% parts orders filled w ithin 24 hours - Assem bles com plete engine Ads by PlusHD.5 w orldw ide - Factory-designed system s built at Caterpillar ISO Caterpillar parts and labor w arranty 9001:2000 certified facilities Ow nership of these m anufacturing processes Preventive m aintenance agreem ents available for repair before failure options enables Caterpillar to produce high quality, dependable product. Scheduled Oil Sam pling program m atches your oil sam ple against Caterpillar set standards to Test ing determ ine: Prototype testing on every m odel: - internal engine com ponent condition - proves com puter design - presence of unw anted fluids - verifies system torsional stability - presence of com bustion by-products - functionality tests every m odel Every Caterpillar engine is dynam om eter tested under full load to ensure proper engine perform ance.
Web Sit e For all your industrial pow er requirem ents, visit w w w .cat-industrial.com .
14 Novem ber 2008
4:40 AM
C32 ACERT ™
INDUSTRIAL ENGINE 709 bkW (950 bhp)
STANDARD ENGINE EQUIPM ENT Air Inlet Syst em Turbocharged Air to Air Aftercooled Cont rol Syst em Electronic governing PTO speed control Program m able ratings Cold m ode start strategy Autom atic altitude com pensation Pow er com pensation for fuel tem perature Program m able low and high idle and total engine lim it Electronic diagnostics and fault logging Engine m onitoring system J1939 Broadcast (diagnostic and engine status) ADEM ™ A4 Cooling Syst em Therm ostats and housing, vertical outlet Jacket w ater pum p, centrifugal Water pum p, inlet
Fuel Syst em M EUI injection Fuel filter, secondary (2 m icron high perform ance) Fuel transfer pum p Fuel prim ing pum p ACERT™ Technology Lube Syst em Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sum p Oil dipstick Oil pum p (gear driven) General Paint, Caterpillar Yellow Vibration dam per Lifting eyes
Exhaust Syst em Exhaust m anifold, dry Optional exhaust outlet Flyw heels and Flyw heel Housing SAE No. 1 Flyw heel housing Ads by PlusHD.5
2
Ad Options
14 Novem ber 2008
4:40 AM
C32 ACERT ™
INDUSTRIAL ENGINE 709 bkW (950 bhp)
PERFORM ANCE CURVES IND - B - DM 9030-00
Torque N•m
M et ric
Engine Pow er kW
BSFC g/ kW-hr
Engine Speed - rpm
Engine Speed Engine Pow er rpm kW
Torque N•m
by PlusHD.5 BSFC g/Ads kW-hr Fuel Rat eAd L/ Options hr
3
14 Novem ber 2008
4:40 AM
C32 ACERT ™
INDUSTRIAL ENGINE 709 bkW (950 bhp)
PERFORM ANCE CURVES IND - B - DM 9030-00
Engine Torque lb•ft
English
Engine Pow er bhp
BSFC lb/ bhp-hr
Engine Speed rpm
by PlusHD.5 Engine Speed Engine Pow er Engine Torque BSFC lb/Ads bhp-hr Fuel RatAde Options rpm bhp lb•ft gal/ hr
4
14 Novem ber 2008
4:40 AM
C32 ACERT ™
INDUSTRIAL ENGINE 709 bkW (950 bhp)
RATINGS AND CONDITIONS IND - B For service w here pow er and/or speed are cyclic (tim e at full load not to exceed 80%).
Engine Perform ance Diesel Engines — 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barom eter and 25ºC (77ºF) tem perature. Perform ance m easured using a standard fuel w ith fuel gravity of 35º API having a low er heating value of 42,780 kJ/kg (18,390 btu/lb) w hen used at 29º C (84.2º F) w ith a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dim ensions (1) Length (2) Width (3) Height
1915.3 m m (75.41 in) 1478.7 m m (58.22 in) 1319.2 m m (51.94 in)
Perform ance Num ber: DM 9030-00 Feature Code: C32DI01 Arr. Num ber: 2638150 M aterials and specifications are subject to change w ithout notice. 13457541
Note: Do not use for installation design. See general dim ension draw ings for detail (Draw ing # 2833535 ).
© 2008 Caterpillar All rights reserved. The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos, "Caterpillar Yellow ," and the POWER EDGE trade dress, as w ell as corporate and product identity used herein, are tradem arks of Caterpillar and m ay not be used w ithout perm ission.
C32 ACERT
839 bkW / 1125 bhp 2100 rpm
Industrial CATERPILLAR ENGINE SPECIFICATIONS I-6, 4-Stroke-Cycle Diesel Bore....................................................... 145.0 mm (5.71 in) Stroke.................................................... 162.0 mm (6.38 in) Displacement....................................... 32.1 L (1,958.86 in3) Aspiration................................... Turbocharged Aftercooled Compression Ratio.................................................... 16.5:1 Rotation (from flywheel end)....................Counterclockwise Weight, Net Dry (approximate kg. lb)....... 2946 kg (6495 lb)
Image shown may not reflect actual engine
FEATURES Emissions Meets Tier 2 emissions requirements. Tier 2 refers to EPA (U.S) standards.
Full Range of Attachments Wide range of bolt-on system expansion attachments, factory designed and tested.
Unmatched Product Support Offered Through Worldwide Supplier Capability Worldwide Caterpillar Dealer Network Caterpillar More than 1,800 dealer outlets - Casts engine blocks, heads, cylinder liners, and Caterpillar factory-trained dealer technicians service flywheel housings - Machines critical components every aspect of your industrial engine Ad of Options 99.7% parts orders filled within 24 hours worldwide - Assembles complete engine Ads by PlusHD.5 Caterpillar parts and labor warranty - Factory-designed systems built at Caterpillar ISO Preventive maintenance agreements available for repair 9001:2000 certified facilities Ownership of these manufacturing processes enables before failure options Caterpillar to produce high quality, dependable product. Scheduled Oil Sampling program matches your oil sample against Caterpillar set standards to determine: Testing - internal engine component condition Prototype testing on every model: - presence of unwanted fluids - proves computer design - presence of combustion by-products - verifies system torsional stability - functionality tests every model Web Site For all your industrial power requirements, visit Every Caterpillar engine is dynamometer tested under www.cat-industrial.com. full load to ensure proper engine performance.
11 March 2008
2:27 AM
INDUSTRIAL ENGINE
C32 ACERT
839 bkW (1125 bhp)
STANDARD ENGINE EQUIPMENT Air Inlet System Turbocharged Air to Air Aftercooled Control System Electronic governing PTO speed control Programmable ratings Cold mode start strategy Automatic altitude compensation Power compensation for fuel temperature Programmable low and high idle and total engine limit Electronic diagnostics and fault logging Engine monitoring system J1939 Broadcast (diagnostic and engine status) ADEM A4 Cooling System Thermostats and housing, vertical outlet Jacket water pump, centrifugal Water pump, inlet
Fuel System MEUI injection Fuel filter, secondary (2 micron high performance) Fuel transfer pump Fuel priming pump ACERT Technology Lube System Crankcase breather Oil cooler Oil filler Oil filter Oil pan front sump Oil dipstick Oil pump (gear driven) General Paint, Caterpillar Yellow Vibration damper Lifting eyes
Exhaust System Exhaust manifold, dry Optional exhaust outlet Flywheels and Flywheel Housing SAE No. 1 Flywheel housing
Ads by PlusHD.5
2
Ad Options
11 March 2008
2:27 AM
C32 ACERT
INDUSTRIAL ENGINE 839 bkW (1125 bhp)
PERFORMANCE CURVES IND - C (Intermittent) - DM9031-00
Torque N m
Metric
Engine Power kW
BSFC g/kW-hr
Engine Speed - rpm
Engine Speed Engine Power rpm kW 2100 2000 1900 1800 1700 1600 1500 1400 1300 1200 1100
839 839 839 839 830 812 787 754 691 599 512
Torque N m 3815 4006 4217 4451 4662 4846 5010 5143 5076 4764 4448
Options Ads by PlusHD.5 BSFC g/kW-hr Fuel RateAd L/hr
214.7 210.6 209.7 207 204.7 203.6 203.1 202.4 202.2 204.6 205.8
214.7 210.6 209.8 207.0 202.6 197.1 190.5 181.9 166.6 146.0 125.7
3
11 March 2008
2:27 AM
INDUSTRIAL ENGINE
C32 ACERT
839 bkW (1125 bhp)
RATINGS AND CONDITIONS IND - C (Intermittent) Intermittent service where maximum power and/or speed are cyclic (time at full load not to exceed 50%).
Engine Performance Diesel Engines 7 liter and higher All rating conditions are based on SAE J1995, inlet air standard conditions of 99 kPa (29.31 in. Hg) dry barometer and 25°C (77°F) temperature. Performance measured using a standard fuel with fuel gravity of 35°API having a lower heating value of 42,780 kJ/kg (18,390 btu/lb) when used at 29°C (84.2°F) with a density of 838.9 g/L.
Ads by PlusHD.5
Ad Options
Engine Dimensions (1) Length (2) Width (3) Height
1914.4 mm 1478.7 mm 1319.2 mm
Note: Do not use for installation design. See general dimension drawings for detail (Drawing # 2833535 ).
Performance Number: DM9031-00
© 2008 Caterpillar
Feature Code: C32DI02 Arr. Number: 2638150
All rights reserved.
Materials and specifications are subject to change without notice. 11699832
The International System of Units (SI) is used in this publication. CAT, CATERPILLAR, SAFETY.CAT.COM their respective logos, "Caterpillar Yellow," and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
Ads by PlusHD.5
La dirección no es válida
Ads by PlusHD.5
Ad Options
Ad Options
View more...
Comments
