Casita de Jengibre Navidad
December 27, 2022 | Author: Anonymous | Category: N/A
Short Description
Download Casita de Jengibre Navidad...
Description
PDF
rochet Pattern
@pinky_pinky_blue
Gingerbread House Crochet Patte Pattern rn. House dimesnions: width 22 width 22cm cm,, length length 29 29cm cm,, height without pipe 27. You can make a house of any size, based on the availability of materials.
You will need : Materials:
Plastic canvas, canvas, size 26 * 33, find a hard one, so it could keep the shape. You will need 4 sheets for a house like mine. Beige felt 9 sheets A4 for lining. You can take the thinnest and cheapest. Yarn: Yarn Art Jeans 07 beige 4 skeins, for roof Alize Cotton Gold 89 terracotta 1 skein (there is a similar shade of Jeans 43). Jeans white (62 or 01) 1 skein, red (26), green (52) and a few different bright shades for sweets. Wooden Wo oden skewers for for barbecue 30 cm. Green pipe cleaners 2 pcs for a wreath and several of Ifany colors for cand candy y canes. transparent transparen t plastic cansmall take a plasticpieces folder). possible: a thin red ribbon,Thin a red-white cord and a (you pair of bells for wreath, white synthetic pompons 2 cm and 1 cm for smoke from a pipe, sweets can also be replaced with colored pompons. A small led garland on batteries. Tools:
2.25 mm crochet hook for 2.25 mm hook for Jeans or the one one,, that is convenient for you for this yarn. 2 mm crochet hook is also needed. Hot glue gun. You can sew details when it is possible, but it is better both to glue and sew, glue gives additional hardness additional hardness.. Sewing threads and needle in tone with the main yarn. Big eye eyed d needle for yarn. Pins,, iron, Pins iron, scissors, stapler, ruler, permanent marker for marking the canvas. It may come in handy: a thimble or a tool such as pliers. The of thethe house is not is not very cheap. cheap . How can you wall save? You cost can make house smaller. You can make a side for 1 window instead window instead of 2. 2. Use cardboard instead of canvas. If the cardboard is brown, then you can probably do without felt lining. The The light lightning ning is is also not obligatory. To save time on crocheting candies crocheting candies,, you can use ready-made colored synthetic pompons and other suitable decorat suitable decorative ive elements. elements.
STITCH KEY:
AR – Adjustable Adjustable Ring(Magic Ring) ch- chain sc- single crochet htc- half treble crochet sl st –slip stitch dc – double crochet
@pinky_pinky_blue
сm
l l a w e d i s
l l a w e d i s
сm
r o o l f
s s e c x e
l l a w t
l l a w k c a b
сm
f o o r
f o o r
n o r f
сm сm
m с
m
сm
сm
с
сm
pipe
m с
сm
@pinky_pinky_blue
First of all cut in half all 4 sheets of canvas. canvas.
@pinky_pinky_blue
@pinky_pinky_blue
Then use 2 pieces to make a front and back walls (see previouse page with a drawing) Keep the triangle pieces, we will need them later. later.
I made this house for a Gingerbread Man from my another pattern. So I need to make the door according to his size.
@pinky_pinky_blue
Cut out the door. And then cut from the door 0.5 cm in height and width. So the door can fit it’s place after crocheting. @pinky_pinky_blue
@pinky_pinky_blue
When cutting parts parts,, pay attention atten tion to the edge. Better cut these cut these small sticks.
@pinky_pinky_blue
Cut out windows according to the drawing. You can mark the canvas with a permanent marker @pinky_pinky_blue
@pinky_pinky_blue
This is how all details of the house will look like. 7 of 8 half pieces of canvas are are in use.Put away 2 pieces for the roof, we will work with the them later.
@pinky_pinky_blue
Make a felt lining for for all parts except the roof. roof. 1 sheet of felt fits for 1 piece of canvas.. Wrap one side, bend the edges. canvas e dges. Fasten Fas ten with hot glue. But try not to put a lot of glue on the edge e dge of the canvas, then it will be hard to stitch. You can can also sew the lining to the canvas.. canvas..
@pinky_pinky_blue @pinky_pinky_blue
@pinky_pinky_blue
Now crochet all the details with main color. Here I can’t give you you exact quantity of stitches and rows. Because it all depends on on the size of your house and your crocheting density. crocheting density. Just crochet Just crochet according to the size of the the parts, parts, always applying and trying on. Single crochet from bottom to top with top with back-and-forth rows. rows.
When you come up to the windows, split your work into 3 parts and crochet them separately.
@pinky_pinky_blue
@pinky_pinky_blue
Now on the top edge of the windows you need to chain as many loops, as you skipped at the bottom of the window. After you finish crocheting the detail iron it to make straight and flat.
@pinky_pinky_blue
To bevel the roof you need to do decreases at the beginning of the row. Apply crocheting to crocheting toand theend base every row, every row, and look, if you need to make a decrease, or to or to keep keep crocheting straight. The There re is no exact no exact formula, formula, it it depends on the angle of the roof and crocheting crocheting dens density ity.. @pinky_pinky_blue
Make window glass from transpearent plastic. Cut squares larger than the window by 1 cm from each side and glue.
@pinky_pinky_blue
@pinky_pinky_blue
Using a needle and sewing thread, sew the door at 4 points. Make several stitches at each point. The door should be able to open and close.
@pinky_pinky_blue
@pinky_pinky_blue
Crochet a rectangle in red, equal to the size of the door. Сrochet Сrochet so so that rows ran along the door, not across. that
@pinky_pinky_blue
Crochet one more the same piece and sew them on door from both sides: stitch open sides over the edge, and near the wall stitch wall stitch through the through the door. door.
@pinky_pinky_blue
@pinky_pinky_blue
@pinky_pinky_blue
Now fix the crocheted walls to the base with glue, and sew all the edges with a needle. Canvas allows you to sew all details easily,, but I am not sure that it will be easy with easily a cardboard. If when stitching the needle gets stuck into the glue, use use thimble or pull out the needle with a pliers. needle
@pinky_pinky_blue
Insert white yarn into the needle and fix 4 threads on the window vertically.
Now tightly braid them with 8-shaped stitches.. stitches
@pinky_pinky_blue
Repeat horizontally, fixing both crossbars in the center. @pinky_pinky_blue
@pinky_pinky_blue
In white, crochet the chain equal to the perimeter of the window, sl st into a ring. Use pins for measuring, and remove them when crocheting.
@pinky_pinky_blue
@pinky_pinky_blue
Work 1 round sc, in corners work 3 cs in 1 chain. chain.
Ch 3 in white, leave it. it. Join red yarn and ch 3 in the next st. st .
@pinky_pinky_blue
Put the white chain behind of the red one, sl st in next st. @pinky_pinky_blue
@pinky_pinky_blue
Again chain 3 in white white..
@pinky_pinky_blue
@pinky_pinky_blue
Now put the hook into the red chain. Put the red chain behind of the white one, sl st in the next st, chain 3. 3.
Continue to crochet in red and white thread around the perimeter. The edge edge may get get wavy wavy,, but but it's it's okay.
@pinky_pinky_blue
@pinky_pinky_blue
Attach the frame to the window, unite the corners and sew the inner edge of the frame to the beige piece piece.. And glue the outer edge with gun, all in this waves will for will straighten. straighten . Makeaframes in frames this way all windows.
@pinky_pinky_blue
The bottom of the house (the floor), also wrap with felt lining on one side and crocheted piece on another. Sew all the walls to the floor (outside).
@pinky_pinky_blue
@pinky_pinky_blue
Raise the walls and sew all angles from outside.
Now let's make the roof. Halves of canvas are not quite suitable in size, we need to make make them longer and narrower. narrower. Cut off 2.5 cm from long side. And use this strip to increase its length, fasten them them together together with with a stapler.
@pinky_pinky_blue
@pinky_pinky_blue
Make felt lining for both parts of the roof.
@pinky_pinky_blue
Crochet roof tiles in tiles in terracotta color. Chain 1 cm cm longer than the base of the roof. Firstt row work sc Firs sc.. From the second row begin to crochet tiles (shell patt pattern) ern)
@pinky_pinky_blue @pinky_pinky_blue
Shell pattern
Here is a scheme for shell pattern.
stitch key ch sc dc
After 1st row of shells join white yarn. Do not turn the work and cs on the front side just through front loops, loops, increase in center of every shell. Cut white white yarn. yarn. @pinky_pinky_blue
@pinky_pinky_blue
Now turn the work and continue to crochet shells according to the scheme but through front loops.
@pinky_pinky_blue
@pinky_pinky_blue
Every 2 rows join white yarn, work 1 row sc and cut the yarn again.
Crochet a whole piece in this way according to the size of the roof.
@pinky_pinky_blue
Join terracota yarn to the beginning edge and crochet the second half of the roof. First work 2 rows sc and then crochet shells. shells.
@pinky_pinky_blue
@pinky_pinky_blue
Steam the roof with an iron, smoothing white stripes towards the edge.
@pinky_pinky_blue
@pinky_pinky_blue
Glue two pieces of the roof to the wrong side of the crocheted tiles. A space for bending should be left between them. Do not apply too much glue.
Sew both pieces along the edges. Bend protruding edges of the crocheted tiles and also stitch them on.
@pinky_pinky_blue
@pinky_pinky_blue
Sew one half of the roof to the house. First sew on front and back walls. walls.
@pinky_pinky_blue
Now sew the long side of the roof to the side wall.
@pinky_pinky_blue
@pinky_pinky_blue
Leave another half of the roof opening, so kids could play with the house. Insert the wood skewers on the sides under the crocheted piece and cut the excess.
@pinky_pinky_blue
Canvas, although hard, but flexible. To make the frame of the house harder house harder,, glue in all the inner corners wood skewers, pre-cutting the desired length.
Along the opened wall (where (where the roof opens) sew on the skew skewer er to the top edge , since there is no corner so glue it in in..
@pinky_pinky_blue
@pinky_pinky_blue
@pinky_pinky_blue
Cut out from the remaining sheets of felt strips about 2 cm wide and glue all the corners. So skew skewers ers fixed even better, house becomes stronger stronger..
@pinky_pinky_blue
To make a pipe, take the triangles, remaining from the front wall. Cut out detail 4 cm wide.
@pinky_pinky_blue
You need 2 pieces of such details with an angle, angle, equal to the angle of the roof. And 2 more rectangles, 4 cm wide, and length according to the sides of the beveled part. And 4*4 cm square for the top.
Sew all the details with a needle in this figure. You can make the pipe opened on top, then you will need to do felt lining inside.
@pinky_pinky_blue
@pinky pinky blue
First crochet a rectangle equal equal to the long side of the pipe. Then pipe. Then continue crocheting continue crocheting the beveled side. Decrease in the beginning and the end of the row for bevel. Try this detail on the base every row every row to decide if decrease is needed or not.
@pinky_pinky_blue
@pinky_pinky_blue
Work the short side straight.
Last side of the pipe is also beveled. But here we need to increase in the beginning and the end of the row. Finally you should get the detail looking like this:
@pinky_pinky_blue
@pinky_pinky_blue
Put it on the plastic base and sew. Also stitch through the canvas to fix.
@pinky pinky blue
Cover the top with a crocheted square. Or don’t make it if you want opened pipe, make a felt lining instead.
@pinky_pinky_blue
Crochet a white strip of 3 rows sc. Sew it on the top of the pipe.
@pinky_pinky_blue
Sew the pipe onto the closed half of the roof. Insert the needle right through the roof. @pinky_pinky_blue
@pinky_pinky_blue
For lightning I took smal led garland with battery and removed these fir trees from it.
@pinky_pinky_blue
Take a wide strip of felt and make a pocket for the battery unit. Glue it right under the pipe, so stitches from attaching attaching the pipe will be not seen from inside. @pinky_pinky_blue
Fold the garland and wrap it with felt, leaving the leds outside.
@pinky_pinky_blue
@pinky_pinky_blue
Glue the garland near to the battery unit. @pinky_pinky_blue
@pinky_pinky_blue
For candy canes I use 2 mm crochet hook. In white yarn 7 sc in Adjustable Ring. Sl st in .first st to make a circle.
@pinky_pinky_blue
@pinky_pinky_blue
Now work through back loops only. In white yarn 1 sl st, 1 sc, 5 htc. Pull up the working loop and remove the hook.
Join red yarn and make another working loop, don’t continue crocheting the white one. In red: 1 sl st and sc around until you come to the end of the white round.
@pinky_pinky_blue
@pinky_pinky_blue
Now leave the red working loop and insert the hook into white one. Htc around. Then leave the white and return to the red one, work sc round in red.
@pinky_pinky_blue
Crochet in this way as high, as long candy cane you need. First finish in red with sl st, fasten off. For finishing in white work 1 sc, 1 sl st. Leave long white end.
@pinky_pinky_blue
Insert a pipe cleaner inside. Darn the hole with the end of the yarn. yarn. @pinky_pinky_blue
The pipe cleaner lets to bend the candy and keeps its shape. shape.
@pinky_pinky_blue
@pinky_pinky_blue
For a more interesting effect, you can additionally embroider embroider another thin strip on a candy ( red on green and green on red).
@pinky_pinky_blue
To make the doorway, crochet a long candy, bend it in П form and and steam with an iron.
@pinky_pinky_blue
@pinky_pinky_blue
The steamed part is easier to glue.
I made round candies candies in in 2 sizes. Big candies were used used for wall decoration (bottom and scatter, scatter, as well as on the bend of the roof). 6 sc in AR, in 2d round inc every st. And work 2 rounds straight. Do not stuff.
@pinky_pinky_blue
Insert the end of the yarn into needle. Sew through the back loops and a nd tighten.
@pinky_pinky_blue
@pinky_pinky_blue
For small round candies: candies: 8 sc in AR and work 2 rounds straight. Do not stuff, tighten with a needle. These small candies are used on the roof and as a door handle.
@pinky_pinky_blue
@pinky_pinky_blue
For a wreath, twist 2 green chenille wire in a circle. Wrap with decorative cord or thin ribbon.
Make a bow from a red ribbon and add a pair of small bells.
@pinky_pinky_blue
@pinky_pinky_blue
For a small mint candy chain 5 in white yarn. Join red yarn and work 1 dc in 1st chain.
@pinky_pinky_blue
Continue working in the same 1st chain. Alternate white and red dc.
@pinky_pinky_blue
When you get 8 white and 8 red dc, finish with a sl st. Make mint candies in different colors.
@pinky_pinky_blue
For mint lollipops first crochet small mint candy, but work the last sl st in white.
@pinky_pinky_blue
Chain 3 in white and 1 dc in the same st. Then work 2 green dc in a green dc of 1st round.
@pinky_pinky_blue
@pinky_pinky_blue
Keep crocheting 2 white and 2 green dc around.
@pinky_pinky_blue
@pinky_pinky_blue
Fasten off the green yarn. In white chain 12 Fasten and go down sc for a stick.
For heart shaped candy 1 sc, 1 htc, 6 dc in AR. @pinky_pinky_blue
@pinky_pinky_blue
Ch 2, 6 dc, 1 htc, 1 sc.
@pinky_pinky_blue
@pinky_pinky_blue
Adjust the ring and get a heart shaped candy. candy.
You can make as many different candies as you want and decorate your house in different ways. All candies are attached with hot glue. The hot glue holds crocheted details very tightly.
@pinky_pinky_blue
For smoke from the chimney I chimney I used white synthe synthetic tic pompons of 2 sizes. Just glue glued d them on top of each other.
@pinky_pinky_blue
Here are some more pictures of the the house house from differen differentt sides sides to better see decoration:
@pinky_pinky_blue
And light switched on. Isn’t it magical?
@pinky_pinky_blue
These two sweet Gingerbread Boy and Girl are made from my another pattern, you can also find it in my Etsy shop. shop.
View more...
Comments