CADUCEUS COIL - The Soliton Pulses Generator

The Soliton Pulses Generator experiment by Jean-Louis Naudin

1 of 9

http://jnaudin.free.fr/spgen/index.htm

The Soliton Pulses Generator experiment created on January 29, 2005 - JLN Labs - Last update January 31, 2005 Toutes les informations et schémas sont publiés gratuitement ( freeware ) et sont destinés à un usage personnel et non commercial All informations and diagrams are published freely (freeware) and are intended for a private use and a non commercial use.

On November 1997, I have built and tested sucessfully a Scalar Waves Transmitter based on caduceus wound coil, this device has shown some very interesting features concerning the transmission of these waves through a shielded and grounded box. Recently a french friend, Jean-Michel Cour, has proposed me to 1

conduct a new interesting experiment2 in this field of researches. So, today, I have decided to re-open the tests of this weird caduceus coil. For the first step, I have used my old Scalar Waves Transmitter device to check if it still works well. The device is now tested with a full digital oscilloscope Fluke 123 with a Shielded Test Lead STL 120 ( 1:1, 1 Mohms/225 pF ).

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

2 of 9

http://jnaudin.free.fr/spgen/index.htm

Above : The test of the Scalar Waves Transmitter.

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

3 of 9

http://jnaudin.free.fr/spgen/index.htm

The voltage is measured beetwen the point A-C (see below)

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

4 of 9

http://jnaudin.free.fr/spgen/index.htm

The Scalar Waves Transmitter works as well than in Nov 1997... The signal measured voltage has the same shape with the digital oscilloscope Fluke 123.

The Soliton Pulses Generator ( SP-Gen v1.0) As Jean-Michel Cour has said in his paper2, he has proposed that the wave pattern emitted by the Caduceus coil is very similar to a Soliton3 pulse. So, in the next phase of the test, I have decided to build and check myself his circuit based on a multiple layers Caduceus wound Coil.

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

5 of 9

http://jnaudin.free.fr/spgen/index.htm

Above : the electronic diagram of the Soliton Pulses Generator which uses a PowerMesh to drive the Caduceus coil.

TM

Mosfet IRF840

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

6 of 9

http://jnaudin.free.fr/spgen/index.htm

The Soliton Pulses Generator is driven with a function generator set to send squared pulses at 15 KHz DC

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

7 of 9

http://jnaudin.free.fr/spgen/index.htm

(50% DTC). Test results : The Caduceus wound coil excitation with a squared pulse shows a very interesting event. When the coil is switched off, a common strong back EMF pulse (up to 600 V) is recorded and, 15 µs later, a train of 30V (0-peak) and undamped pulses can be detected (see the scope diagram below). This train of pulses produced by the Caduceus coil can be related to a Soliton because it is undamped.

Input frequency : 15 KHz (DTC=50%)

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

8 of 9

http://jnaudin.free.fr/spgen/index.htm

Input frequency : 25 KHz (DTC=13.4%)

Some thinkings and hypothesis about the observed phenomenon : Today, after some tests with the SP-Gen, my main hypothesis is that the train of Soliton pulses is produced by an avalanche effect of the domains walls in the ferrite core. The strong back EMF pulse initiates the motion of the Bloch walls which surround the magnetic domains. Then the avalanche waves of the Bloch walls go back and forth along the ferrite rod as a Soliton wave which moves back and forth in a long and rectangular tank filled with water. The avalanche effect of the domains walls is able to produce an induction with a very weak magnetic field, this is the well known Barkhausen effect discovered in 1919 by Heinrich 6

George Barkhausen . The most interesting fact to study here in this experiment, is that the Barkhausen jumps seem to move themselves autonomously in the ferrite rod after that the back EMF pulse which as initiated the process has vanished. 7

Today, it's still an hypothesis and more tests and deep investigations need to be conducted to confirm this fact...

See also : Tests of the EM Soliton pulses through an EM Shield Some comments from Tom Bearden about this experiment

24.9.2010 11:41

The Soliton Pulses Generator experiment by Jean-Louis Naudin

9 of 9

http://jnaudin.free.fr/spgen/index.htm

The Barkhausen Effect experiment

New tests are underway, stay tuned... Reference documents : 1. The Scalar Waves Transmitter by JL Naudin 2. Expérience basique pour produire des « solitons » électromagnétiques à partir d’une bobine d’induction en Caducée par Jean-Michel Cour 3. What is "soliton"? by Kanehisa Takasaki (Kyoto University) 4. The Soliton home page by the Heriot-Watt University of Edingburgh 5. Propagation of an electromagnetic soliton in a ferromagnetic medium by V. Veerakumar and M. Daniel 6. The Barhausen Effect 7. Heinrich Georg Barkhausen

Acknowledgments : Jean-Michel Cour for the sharing of all his ideas to the group and the building of a fruitful synergy around the world, Dave Brockmann (a.k.a. "Dave") and his breakthrough with the dual caduceus resonance effect, Joe Arnold (a.k.a. "Joe") who has replicated and confirmed most of the results from Dave & Jean-Michel, Ulysses Martins Rezende, who was the first proposed the "soliton" hypothesis to explain the experiment.

For more informations : Jean-Louis Naudin : [email protected]

Return to the JLN Labs page This page has received

visitors since January 30, 2005

24.9.2010 11:41