BS EN 10279-2000.pdf

BRITISH STANDARD

om

Hot rolled steel channels Ð Tolerances on shape, dimension and mass

| BS EN | | | 10279:2000 | | | | Incorporating | Corrigendum No. 1 | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

w

w

w

.b

zf

xw

.c

热轧钢管——形状、尺寸和质量公差

The European Standard EN 10279:2000 has the status of a British Standard

ICS 77.140.70

NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

BS EN 10279:2000

National foreword This British Standard is the official English language version of EN 10279:2000. The UK participation in its preparation was entrusted to Technical Committee ISE/13, Structural steel sections, which has the responsibility to: Ð aid enquirers to understand the text; Ð present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed;

om

Ð monitor related international and European developments and promulgate them in the UK.

A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references

.c

The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled ªInternational Standards Correspondence Indexº, or by using the ªFindº facility of the BSI Standards Electronic Catalogue.

xw

A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application.

.b

zf

Compliance with a British Standard does not of itself confer immunity from legal obligations.

w

Summary of pages

This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 7 and a back cover.

w

w

The BSI copyright notice displayed in this document indicates when the document was last issued.

This British Standard, having been prepared under the direction of the Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15 April 2000  BSI 10-2000

ISBN 0 580 34024 4

Amendments issued since publication Amd. No.

Date

Comments

12002

October 2000

Amends shoulder headings, and corrects year of EN

Corrigendum No. 1

(1

(8523($167$1'$5' 1250((8523e(11( (8523b,6&+(1250

-DQXDU\

,&6

(QJOLVKYHUVLRQ

om

+RWUROOHGVWHHOFKDQQHOV±7ROHUDQFHVRQVKDSHGLPHQVLRQV DQGPDVV

7KLV(XURSHDQ6WDQGDUGZDVDSSURYHGE\&(1RQ1RYHPEHU

:DUPJHZDO]WHU83URILOVWDKO±*UHQ]DEPD‰H )RUPWROHUDQ]HQXQG*UHQ]DEZHLFKXQJHQGHU0DVVH

.c

3URILOpVHQ8HQDFLHUODPLQpVjFKDXG±7ROpUDQFHVVXUOD IRUPHOHVGLPHQVLRQVHWODPDVVH

&(1PHPEHUVDUHERXQGWRFRPSO\ZLWKWKH&(1&(1(/(&,QWHUQDO5HJXODWLRQVZKLFKVWLSXODWHWKHFRQGLWLRQVIRUJLYLQJWKLV(XURSHDQ 6WDQGDUGWKHVWDWXVRIDQDWLRQDOVWDQGDUGZLWKRXWDQ\DOWHUDWLRQ8SWRGDWHOLVWVDQGELEOLRJUDSKLFDOUHIHUHQFHVFRQFHUQLQJVXFKQDWLRQDO VWDQGDUGVPD\EHREWDLQHGRQDSSOLFDWLRQWRWKH&HQWUDO6HFUHWDULDWRUWRDQ\&(1PHPEHU

xw

7KLV(XURSHDQ6WDQGDUGH[LVWVLQWKUHHRIILFLDOYHUVLRQV(QJOLVK)UHQFK*HUPDQ $YHUVLRQLQDQ\RWKHUODQJXDJHPDGHE\WUDQVODWLRQ XQGHUWKHUHVSRQVLELOLW\RID&(1PHPEHULQWRLWVRZQODQJXDJHDQGQRWLILHGWRWKH&HQWUDO6HFUHWDULDWKDVWKHVDPHVWDWXVDVWKHRIILFLDO YHUVLRQV

w

w

w

.b

zf

&(1PHPEHUVDUHWKHQDWLRQDOVWDQGDUGVERGLHVRI$XVWULD%HOJLXP&]HFK5HSXEOLF'HQPDUN)LQODQG)UDQFH*HUPDQ\*UHHFH ,FHODQG,UHODQG,WDO\/X[HPERXUJ1HWKHUODQGV1RUZD\3RUWXJDO6SDLQ6ZHGHQ6ZLW]HUODQGDQG8QLWHG.LQJGRP

(8523($1 &200,77(( )25 67$1'$5',=$7,21 &20,7e (8523e(1 '( 1250$/,6$7,21 (8523b,6&+(6 .20,7(( )h5 125081*

&HQWUDO6HFUHWDULDWUXHGH6WDVVDUW%%UXVVHOV

‹&(1

$OOULJKWVRIH[SORLWDWLRQLQDQ\IRUPDQGE\DQ\PHDQVUHVHUYHG ZRUOGZLGHIRU&(1QDWLRQDO0HPEHUV

5HI1R(1(

3DJH (1 &RQWHQWV 3DJH 6FRSH 1RUPDWLYHUHIHUHQFHV 'HILQLWLRQV  7ROHUDQFHVRQGLPHQVLRQVDQGVKDSH  0DVV

om

/HQJWKO  7DEOH²7ROHUDQFHVIRUWDSHUIODQJHFKDQQHOV 

w

w

w

.b

zf

xw

.c

7DEOH²7ROHUDQFHVIRUSDUDOOHOIODQJHFKDQQHOV 

‹%6,

3DJH (1 )RUHZRUG 7KLV(XURSHDQ6WDQGDUGKDVEHHQSUHSDUHGE\7HFKQLFDO&RPPLWWHH(&,667&6WUXFWXUDOVWHHO VHFWLRQVDQGKRWUROOHGVWHHOEDUVIRUHQJLQHHULQJXVH'LPHQVLRQVDQGWROHUDQFHVWKH6HFUHWDULDWRI ZKLFKLVKHOGE\%6, 7KLV(XURSHDQ6WDQGDUGVKDOOEHJLYHQWKHVWDWXVRIDQDWLRQDOVWDQGDUGHLWKHUE\SXEOLFDWLRQRIDQ LGHQWLFDOWH[WRUE\HQGRUVHPHQWDWWKHODWHVWE\-XO\DQGFRQIOLFWLQJQDWLRQDOVWDQGDUGVVKDOOEH ZLWKGUDZQDWWKHODWHVWE\-XO\

om

7KLV(XURSHDQ6WDQGDUGKDVEHHQSUHSDUHGXQGHUDPDQGDWHJLYHQWR&(1E\WKH(XURSHDQ &RPPLVVLRQDQGWKH(XURSHDQ)UHH7UDGH$VVRFLDWLRQDQGVXSSRUWVHVVHQWLDOUHTXLUHPHQWVRI(8 'LUHFWLYHV  7KHGLVFXVVLRQVZLWKLQ(&,667&ZHUHEDVHGRQ',1DQG%63DUW

w

w

w

.b

zf

xw

.c

$FFRUGLQJWRWKH&(1&(1(/(&,QWHUQDO5HJXODWLRQVWKHQDWLRQDOVWDQGDUGVRUJDQL]DWLRQVRIWKH IROORZLQJFRXQWULHVDUHERXQGWRLPSOHPHQWWKLV(XURSHDQ6WDQGDUG$XVWULD%HOJLXP&]HFK 5HSXEOLF'HQPDUN)LQODQG)UDQFH*HUPDQ\*UHHFH,FHODQG,UHODQG,WDO\/X[HPERXUJ 1HWKHUODQGV1RUZD\3RUWXJDO6SDLQ6ZHGHQ6ZLW]HUODQGDQGWKH8QLWHG.LQJGRP

‹%6,

3DJH (1

 6FRSH 7KLV(XURSHDQ6WDQGDUGVSHFLILHVUHTXLUHPHQWVIRUWKHWROHUDQFHVRQGLPHQVLRQVVKDSHDQGPDVVRI KRWUROOHGVWHHOFKDQQHOVZLWKWDSHUHGIODQJHVRUSDUDOOHOIODQJHV7KHVHUHTXLUHPHQWVGRQRWDSSO\WR FKDQQHOVSURGXFHGIURPVWDLQOHVVVWHHO

 1RUPDWLYHUHIHUHQFHV

om

7KLV(XURSHDQ6WDQGDUGLQFRUSRUDWHVE\GDWHGRUXQGDWHGUHIHUHQFHSURYLVLRQVIURPRWKHU SXEOLFDWLRQV7KHVHQRUPDWLYHUHIHUHQFHVDUHFLWHGDWWKHDSSURSULDWHSODFHVLQWKHWH[WDQGWKH SXEOLFDWLRQVDUHOLVWHGKHUHDIWHU)RUGDWHGUHIHUHQFHVVXEVHTXHQWDPHQGPHQWVWRRUUHYLVLRQVRI DQ\RIWKHVHSXEOLFDWLRQVDSSO\WRWKLV(XURSHDQ6WDQGDUGRQO\ZKHQLQFRUSRUDWHGLQLWE\DPHQGPHQW RUUHYLVLRQ)RUXQGDWHGUHIHUHQFHVWKHODWHVWHGLWLRQRIWKHSXEOLFDWLRQUHIHUUHGWRDSSOLHV (1'HILQLWLRQRIVWHHOSURGXFWV

 'HILQLWLRQV

 7ROHUDQFHVRQGLPHQVLRQVDQGVKDSH

xw

 6HFWLRQKHLJKWK

.c

)RUWKHSXUSRVHRIWKLVVWDQGDUGWKHGHILQLWLRQVJLYHQLQ(1DSSO\

 )ODQJHZLGWKE

zf

7KHGHYLDWLRQIURPQRPLQDORQVHFWLRQKHLJKWK VKDOOEHZLWKLQWKHWROHUDQFHJLYHQLQ7DEOHIRU WDSHUHGIODQJHFKDQQHOVDQGLQ7DEOHIRUSDUDOOHOIODQJHFKDQQHOV+HLJKWLVPHDVXUHGRYHUWKH ZHE

.b

7KHGHYLDWLRQIURPQRPLQDORQIODQJHZLGWKE VKDOOEHZLWKLQWKHWROHUDQFHJLYHQLQ7DEOHIRU WDSHUHGIODQJHFKDQQHOVDQGLQ7DEOHIRUSDUDOOHOIODQJHFKDQQHOV  :HEWKLFNQHVVV

w

7KHGHYLDWLRQIURPQRPLQDORQZHEWKLFNQHVVV ZKHQPHDVXUHGDWWKHPLGKHLJKWSRVLWLRQRIWKH ZHEVKDOOEHZLWKLQWKHWROHUDQFHJLYHQLQ7DEOHIRUWDSHUHGIODQJHFKDQQHOVDQGLQ7DEOHIRU SDUDOOHOIODQJHFKDQQHOV

w

 )ODQJHWKLFNQHVVW

w

7KHGHYLDWLRQIURPQRPLQDORQIODQJHWKLFNQHVVW ZKHQPHDVXUHGDWDGLVWDQFHRIEIURPWKHWRH RIWKHIODQJHVKDOOEHZLWKLQWKHWROHUDQFHJLYHQLQ7DEOHIRUWDSHUHGIODQJHFKDQQHOVDQGLQ7DEOH IRUSDUDOOHOIODQJHFKDQQHOV

 +HHOUDGLXVU

7KHUDGLXVRIWKHKHHOUDGLXVU VKDOOQRWH[FHHGWZKHUHWLVWKHIODQJHWKLFNQHVV

 2XWRIVTXDUHQHVVNN DQGZHEERZI  7KHRXWRIVTXDUHQHVVRIWKHVHFWLRQNN VKDOOQRWH[FHHGWKHPD[LPXPJLYHQLQ7DEOH IRUWDSHUHGIODQJHFKDQQHOVDQGLQ7DEOHIRUSDUDOOHOIODQJHFKDQQHOV  7KHZHEIODWQHVVI VKDOOQRWH[FHHGWKHYDOXHVJLYHQLQ7DEOHIRUWDSHUHGIODQJHFKDQQHOV DQGLQ7DEOHIRUSDUDOOHOIODQJHFKDQQHOV

‹%6,

3DJH (1

 6WUDLJKWQHVVT[[RUT\\

7KHVWUDLJKWQHVVT[[RUT\\ VKDOOFRQIRUPWRWKHUHTXLUHPHQWVJLYHQLQ7DEOHIRUWDSHUHGIODQJH FKDQQHOVDQGLQ7DEOHIRUSDUDOOHOIODQJHFKDQQHOV

 0DVV 7KHGHYLDWLRQEHWZHHQWKHHIIHFWLYHYDOXHDQGWKHQRPLQDOYDOXHRIWKHPDVVSHUXQLWOHQJWKVKDOO FRPSO\IRUDQ\SLHFHZLWKWKHUHTXLUHPHQWVJLYHQLQ7DEOHIRUWDSHUHGIODQJHFKDQQHOVDQGLQ 7DEOHIRUSDUDOOHOIODQJHFKDQQHOV 7KHQRPLQDOYDOXHRIPDVVSHUXQLWOHQJWKVKDOOEHGHWHUPLQHGXVLQJDGHQVLW\RINJGP

7KHVHFWLRQVVKDOOEHFXWWRRUGHUHGOHQJWKVWRWROHUDQFHVRIHLWKHU E  + PP 

.c

RUE\DJUHHPHQWEHWZHHQWKHSXUFKDVHUDQGPDQXIDFWXUHU

om

 /HQJWKO

w

w

w

.b

zf

xw

D “PP

‹%6,

3DJH (1

w

w

w

.b

zf

xw

.c

om

7DEOH²7ROHUDQFHVIRUWDSHUIODQJHFKDQQHOV

‹%6,

3DJH (1

w

w

w

.b

zf

xw

.c

om

7DEOH²7ROHUDQFHVIRUSDUDOOHOIODQJHFKDQQHOV

‹%6,

BSI Ð British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.

om

It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards.

.c

Buying standards

Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001.

xw

In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards

BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020 8996 7048.

zf

| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |

Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001.

.b

BS EN 10279:2000

Copyright

w

w

w

Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means ± electronic, photocopying, recording or otherwise ± without prior written permission from BSI.

BSI 389 Chiswick High Road London W4 4AL

This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.