PROVIDING INDUSTRIES WITH EXCELLENCE.!!
SHAN WANG
PE / PEX JAW CRUSHER Product Description The Jaw Crusher is widely applied in crushing stones for mining, metallurgical industry, building material, materia l,
highway,, railway, highway railway, water conserv conservancy ancy,, and chemica chemical, l, etc. PE series is ideal for primary
crushing, for PEX series is ideal for secondary and fine crushing.
Features High crushing ratio, even particle size. Simple structure, easy maintenance and low cost. Adjustable discharge opening. Large crushing chamber increases production produc tion capacity. capacity. Forged and heat-treated eccentric shaft with excellence life time and supreme quality.
Typical Replacement Parts 1. Protectio Protection n Plate 2. Moving jaw plare 3. Eccentric shaft 4. Swing jaw 5. Fly wheel 6. Fixed jaw plate 7. Frame 8. Toggle plate pad 9. Toggle plate 10. Adjustment part 11. Pull-rod and spring part
www.primainternusa.com PHONE +6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!!
SHAN WANG Motor
Feed Opening (mm)
Max. Feed size (mm)
Discharge opening range (mm)
Capacity (t/h)
Power (kW)
Note : Parameters and specifications are subject to change without further notice
www.primainternusa.com PHONE +6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
Weight (t)
PROVIDING INDUSTRIES WITH EXCELLENCE.!!
SHAN WANG
PF IMPACT CRUSHER Product Description The Impact Crusher is used for intermediate grinding of ores and rocks of maximum compressive strength of 360Mpa. It features large processing capacity and fine aggregate size. It is widely used in high grade expressways, irrigation, airport and building industries.
Features Multi capacity crushing, suitable for hard rocks. Finished product produced in cubeshaped Compact structure, strong mechanical properties. New type abrasive material offers longer service life of the hammer. Impact plate and liners.
Typical Replacement Parts 1. Frame 2. Adjustment Device 3. Linear plate 4. Rotor
Motor
Rotor Specification (mm)
Feed Opening (mm)
Max. Feed Size (mm)
Capacity (t/h)
Power (kW)
Weight (t)
PF-1007V1
1000X700
400x730
300
30-50
55
9.5
PF-1010V
1000X1050
400x1080
350
50-80
55
12.8
PF-1210V
1280X1050
400x1080
350
70-120
110
14.1
PF-1214V
1280X1400
400x1430
350
95-145
132
16.8
PF-1315V
1320X1500
800x1530
500
100-180
185-220
21
PF-1320V
1320X2000
800x2030
500
280-320
280
29.7
PF-1210V1
1280X1050
400x1080
350
70-120
110
19.1
PF-1214V1
1280X1400
400x1430
350
95-145
132
13.3
PF-1420
1400X2000
1250x2030
600
250-350
355
40
PF-1620
1600X2000
1600x2080
600-800
350-400
560
47.5
Note : Parameters and specifications are subject to change without further notice
www.primainternusa.com PHONE +6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!!
SHAN WANG
PY CONE CRUSHER Product Description PY Cone Crusher is widely in metal and non metal mines, cement, construction and aggregate industries. It is suitable for processing iron ore, non metal ore, granite, lime stone, quartz, quartzite, sandstone, and cobble-stone.
Features 1.
2. 3.
Typical Replacement Parts 1. 2. 3. 4. 5. 6. 7.
Adjustment part Support part Crushing part Frame Spring Driving Part Eccentric sleeve
Motor
Max. Feed Size (mm)
Discharge Opening range (mm)
Capacity (t/h)
Power (kW)
Weight (t)
PYB-600
65
12-25
2540
30
5.3
PYD-600
35
3-15
1223
30
5.3
PYB-900
115
15-50
5090
55
11.2
PYD-900
40
3-13
1450
55
11.2
PYZ-900
60
5-20
5085
55
11.2
PYB-1200
145
20-50
110168
110
24.7
PYX-1200
100
8-25
42134
110
25
PYD-1200
50
3-15
18105
110
25.3
PYB-1750
215
25-60
280480
155
50.3
PYZ-1750
185
10-30
115320
155
50.3
PYD-1750
85
5-15
75230
155
50.2
PYD-2200II
100
5-15
120340
280
83.5
PYB-2200II
300
30-60
5901000
280
83.1
Note : Parameters and specifications are subject to change without further notice
www.primainternusa.com PHONE +6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!!
SHAN WANG
BELT CONVEYOR Product Description The Belt Conveyor produced by our company has the advantages of large conveying capacity, simple structure, convenient maintenance and standard components. the structure is constructed with supreme quality material, high quality belt conveyor and knock down system to provide easy installation and maintenance. belt conveyor can be used under the ambient temperature of -20°C+40°C. The temperature of the materials to be conveyed should be below 50°C.
Typical Replacement Parts 1. 2. 3. 4. 5. 6. 7. 8. 9.
Straining device Tail Roller Support roller group Tail frame Middle frame Tape Head frame Head roller Driving devicw
www.primainternusa.com PHONE +6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!!
SHAN WANG Belth width (mm)
Belth length (m)
www.primainternusa.com PHONE +6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
Power (kW)
Belt speed (m/s) Capacity (t/h)
PROVIDING INDUSTRIES WITH EXCELLENCE.!! www.primainternusa.com
FIELD ENGINERING
PIP supports field enginering experts in surveying and working out the best solutionfor customized products, wear parts and machines.
DESIGN & LAYOUT Design Prima Internusa Perkasa engineering team use state-of-the-art 3D design software to develop and improve engineering requirements. By using the latest design software our team is able to visualize the for plant layout and optimizations of wear parts before it is supplied. Also it is possible to carry out advanced FEA and the 3D models giving PIP engineers the insight of wear-parts endurance to pressure. When it comes to plan layouts, our engineers have both 2D and 3D software at disposal to provide us the most flexible approach to customer’s requirements.
Plant Layout PIP project engineers will work with the customers on optimizing the layout for the plan upgrades, wear parts optimization for wear life, minimizing product downtime and successful green field projects.
PHONE
+6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!! www.primainternusa.com
SPAREPARTS FOR CRUSHER MACHINE
Concave
Jaw Plate
Mantle
Jaw Plate
Concave
Jaw Plate
Mantle
Check Plate
PHONE
+6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!! www.primainternusa.com
Swing jaw
Toogle Plate
Roller and belt conveyor
Flywheel pulley
Inner part products
PHONE
+6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
PROVIDING INDUSTRIES WITH EXCELLENCE.!! www.primainternusa.com
PROJECT REFERENCES
Main Equipments of the Sand-making & Sieving Production Line
According to sizes, hardness, capacity, usage and other conditions of stone material, various stone or sand-making production line can be supplied here. We also arrange professional technical person to assist in installing, debugging, training operators and repairmen until the production line accomplish the normal standard production.
PHONE
+6261 455 7222
FAX+6261 4551 336 E-MAIL
[email protected]
Jl. Walikota no.3, Medan 20152 North Sumatera, Indonesia
