British Standard List

British Standards - Quick Reference Guide The following British Standards are listed or referred to in this issue of Update Standards with the exception of those in ‘New Work Started’.

Building and civil engineering BS 4248 ........................................................14, 23 BS 5950 ..............................................................23 BS 5974 ................................................................8 BS 6100 ................................................................8 BS 6911 ........................................................17, 23 BS 9295 ................................................................8 DD CEN/TS 13307 ..............................................18 DD CEN/TS 15366 ..............................................18 BS EN 196 ............................................................8 BS EN 249 ............................................................8 BS EN 338 ............................................................8 BS EN 1501 ........................................................21 BS EN 1994 ........................................................23 BS EN 1996 ........................................................19 BS EN 1999 ........................................................21 BS EN ISO 7096 ..................................................19 BS EN 12269 ......................................................12 BS EN 13084 ......................................................19 BS EN 14279 ......................................................21 BS EN 14695 ......................................................12 BS EN 15304 ......................................................12 BS EN 15636 ......................................................14 BS EN 15651 ......................................................14 BS EN 15743 ................................................14, 23 BS EN 15848 ......................................................14 BS ISO 10265 ...............................................17, 23 PD CEN/TR 14383 ...............................................18 NA to BS EN 1993 ................................................8 NA to BS EN 1999 ..............................................22

Consumer products and services BS 1384 ........................................................16, 23 BS 3951 ..............................................................20 BS 4540 ........................................................10, 23 BS 8517 ................................................................8 DD CEN ISO/TS 10272 ........................................18 DD CEN ISO/TS 16634 ........................................18 BS EN 597 ..........................................................22 BS EN 1022 ........................................................22 BS EN 1023 ........................................................22 BS EN 1129 ........................................................22 BS EN 1130 ........................................................22 BS EN 1334 ........................................................22 BS EN 1725 ........................................................22 BS EN ISO 2825 ............................................10, 23 BS EN 12507 ......................................................12 BS EN 12727 ......................................................22 BS EN 15543 ......................................................19 BS EN 50131 ................................................14, 24 BS ISO 5 .......................................................16, 23 BS ISO 3890 .......................................................16 BS ISO 9211 .......................................................17 BS ISO 17321 .....................................................22 BS ISO 23954 .....................................................17 DD ISO/TS 27105 ................................................19 DD ISO/TS 27106 ................................................19 DD CLC/TS 50131 ........................................14, 24

Electrotechnical BS BS BS BS

4

4607 ..............................................................20 6201 ........................................................15, 23 EN 50015 ......................................................24 EN 50065 ......................................................21

BS EN 50290 ......................................................14 BS EN 50364 ......................................................14 BS EN 50366 ......................................................19 BS EN 50397 ......................................................14 BS EN 50411 ......................................................15 BS EN 55015 ......................................................19 BS EN 60079 ................................................24, 25 BS EN 60318 ................................................15, 24 BS EN 60335 ..........................................15, 19, 22 BS EN 60384 ........................15, 19, 20, 23, 24, 25 BS EN 60630 ......................................................22 BS EN 60730 ................................................15, 22 BS EN 60745 ................................................15, 24 BS EN 60809 ......................................................22 BS EN 61010 ......................................................22 BS EN 61029 ......................................................15 BS EN 61051 ................................................20, 25 BS EN 61280 ......................................................15 BS EN 61300 ................................................15, 23 BS EN 61347 ......................................................22 BS EN 61557 ......................................................24 BS EN 61753 ......................................................15 BS EN 61755 ......................................................15 BS EN 61850 ......................................................15 BS EN 61869 ......................................................16 BS EN 62002 ......................................................16 BS EN 62148 ......................................................16 BS EN 62333 ......................................................16 BS EN 62493 ......................................................16 BS IEC 60079 ......................................................25 BS IEC 61010 ......................................................25 BS CECC 30801 ..................................................24 DD IEC/TS 61850 ..........................................19, 25 DD CLC/TS 61850 ........................................19, 25 PD CLC/TR 50542 ...............................................18 PD IEC/TR 61292 ................................................18 PD IEC/TR 61341 ................................................18 PD IEC/TR 62476 ................................................18 BS QC 300000 .............................................15, 24 BS QC 300100 .............................................15, 24 BS QC 300301 ....................................................24 BS QC 300400 ....................................................24 BS QC 300401 ....................................................24 BS QC 300600 ....................................................24 BS QC 300601 ....................................................25 BS QC 300700 ....................................................25 BS QC 300701 ....................................................25 BS QC 300801 ....................................................25 BS QC 301200 ....................................................25 BS QC 301201 ....................................................25 BS QC 301800 ....................................................25 BS QC 301900 ....................................................25 BS QC 301901 ....................................................25 BS QC 420000 ....................................................25

Engineering BS BS BS BS BS BS BS BS BS BS BS BS

799 ..................................................................8 848 ................................................................12 3385 ..............................................................23 3455 ..............................................................23 3510 ..............................................................23 3664 ..............................................................23 3775 ..............................................................23 3890 ..............................................................23 4247 ..............................................................23 5045 ..............................................................23 5288 ..............................................................23 6200 ........................................................11, 23

Prices may be subject to change.

BS 6339 ........................................................12, 25 BS 7772 ..............................................................16 BS 7780 ........................................................16, 24 BS 7839 ........................................................17, 24 DD CEN/TS 15656 ..............................................18 BS EN 81 ............................................................19 BS EN 267 ............................................................8 BS EN 453 ..........................................................20 BS EN 632 ....................................................11, 24 BS EN 869 ..........................................................20 BS EN 1057 ........................................................20 BS EN 1495 ........................................................20 BS EN 1676 ..........................................................8 BS EN 1706 ........................................................10 BS EN 1713 ..................................................14, 24 BS EN 1870 ........................................................21 BS EN 2240 ........................................................10 BS EN 2863 ........................................................10 BS EN 2954 ........................................................10 BS EN 3226 ........................................................11 BS EN 3227 ........................................................11 BS EN 3537 ........................................................11 BS EN 3538 ........................................................11 BS EN 3539 ........................................................11 BS EN 3660 ........................................................11 BS EN 3753 ........................................................11 BS EN ISO 3908 ............................................11, 24 BS EN ISO 4254 ............................................11, 24 BS EN 4474 ........................................................11 BS EN 4632 ........................................................11 BS EN 4662 ........................................................11 BS EN ISO 4945 ............................................11, 23 BS EN ISO 5821 ............................................11, 24 BS EN 6069 ........................................................11 BS EN ISO 9445 ............................................11, 24 BS EN 10283 ......................................................11 BS EN 12062 ................................................14, 24 BS EN 12663 ......................................................12 BS EN 12864 ......................................................21 BS EN 12965 ......................................................21 BS EN 13001 ......................................................21 BS EN 13322 ................................................19, 23 BS EN ISO 13351 ..........................................12, 25 BS EN 13418 ......................................................21 BS EN 14910 ......................................................21 BS EN 15056 ......................................................21 BS EN 15622 ......................................................14 BS EN ISO 17635 ..........................................14, 24 BS EN ISO 20815 ................................................14 BS EN ISO 23279 ..........................................14, 24 BS EN 23908 ................................................11, 24 BS EN 25821 ................................................11, 24 BS ISO 3547 .......................................................22 BS ISO 3548 .......................................................16 BS ISO 3780 .................................................16, 26 BS ISO 4251 .................................................16, 26 BS ISO 6194 .................................................16, 24 BS ISO 6550 .......................................................16 BS ISO 6580 .................................................12, 25 BS ISO 7612 .......................................................17 BS ISO 10191 ...............................................17, 26 BS ISO 10679 .....................................................17 BS ISO 10911 ...............................................17, 24 BS ISO 11929 ...............................................17, 25 BS ISO 12188 .....................................................17 BS ISO 12214 .....................................................17 BS ISO 16110 .....................................................17 BS ISO 16750 .....................................................17 BS ISO 16992 .....................................................17

Update Standards May 2010

British Standards - Quick Reference Guide continued... BS BS BS BS BS BS BS BS

ISO 27025 .....................................................17 ISO 27894 .....................................................17 4A 113 ..........................................................20 4A 114 ..........................................................20 3S 500 ...........................................................19 4S 500 ...........................................................19 AU 50 ................................................16, 17, 26 AU 175 ....................................................16, 26

Health and environment BS 5724 ........................................................15, 16 BS 10999 ..............................................................8 DD CEN/TS 15674 ..............................................22 DD CEN/TS 15675 ..............................................22 BS EN 208 ............................................................8 BS EN 550 ..........................................................24 BS EN 980 ..........................................................24 BS EN 1656 ..........................................................8 BS EN 1820 ........................................................21 BS EN ISO 7885 ..................................................11 BS EN ISO 10993 ................................................12 BS EN ISO 11135 ................................................24 BS EN ISO 11737 ................................................12 BS EN 12183 ......................................................12 BS EN 12184 ......................................................12 BS EN 12342 ......................................................21 BS EN 13034 ......................................................21 BS EN 13544 ......................................................21 BS EN 14605 ......................................................21 BS EN 14884 ......................................................22 BS EN ISO 14937 ................................................12 BS EN 15269 ......................................................12 BS EN 15882 ......................................................14 BS EN ISO 20795 ................................................14 BS EN ISO 21533 ................................................19 BS EN ISO 21969 ................................................14 BS EN 45502 ......................................................14 BS EN 60601 ................................................15, 16 BS EN 62083 ......................................................16 BS EN 80601 ......................................................16 BS ISO 7176 .................................................16, 17 BS ISO/TR 14696 .................................................25 BS ISO 81060 .....................................................18 PD CEN/TR 15874 ...............................................18

Information systems BS 6701 ................................................................8 BS EN ISO 13606 ................................................12 BS EN 61918 ......................................................16 BS ISO/IEC 13335 ...............................................25 BS ISO/IEC 24735 ...............................................17 DD ISO/TS 21547 ................................................18 DD ISO/TS 27790 ................................................19 PD ISO/TR 11633 ................................................18 PD ISO/TR 11636 ................................................18 PD ISO/TR 12309 ................................................18 PD ISO/IEC TR 18018 ..........................................18

Management systems BS 4899 ..............................................................23 DD 261 ...............................................................18 BS EN ISO 14001 ................................................19

Materials and chemicals BS 611 ..........................................................14, 23 BS 2000 .................................................11, 12, 24 BS 6580 ................................................................8

Update Standards May 2010

BS 7723 ........................................................17, 24 DD CEN/TS 14961 ........................................12, 24 DD CEN ISO/TS 17234 ..................................14, 24 BS EN ISO 105 ......................................................8 BS EN 1007 ..........................................................8 BS EN 1071 ........................................................19 BS EN 1236 ........................................................26 BS EN 1237 ........................................................26 BS EN ISO 1248 ..................................................19 BS EN ISO 3175 ............................................10, 11 BS EN ISO 3924 ..................................................11 BS EN ISO 7837 ..................................................26 BS EN ISO 11111 ..........................................12, 21 BS EN ISO 11295 ..........................................12, 24 BS EN 12472 ......................................................21 BS EN ISO 12625 ................................................12 BS EN 12878 ......................................................26 BS EN 13301 ......................................................12 BS EN 13302 ................................................12, 24 BS EN 13366 ......................................................26 BS EN 13368 ......................................................26 BS EN 13507 ......................................................12 BS EN 13689 ................................................12, 24 BS EN 13702 ................................................12, 24 BS EN 13900 ......................................................26 BS EN ISO 14419 ................................................12 BS EN 14787 ......................................................26 BS EN 14888 ......................................................26 BS EN 14896 ................................................12, 24 BS EN 14961 ................................................12, 24 BS EN ISO 15487 ................................................12 BS EN 15845 ......................................................14 BS EN ISO 17234 ..........................................14, 24 BS EN ISO 19739 ................................................19 BS EN ISO 24998 ..........................................14, 23 BS ISO 7507 .................................................17, 24 BS ISO 8779 .......................................................17 BS ISO 12643 .....................................................17 BS ISO 14436 .....................................................17 BS ISO 19334 .....................................................17 BS ISO 28078 .....................................................18 PD CEN/TR 15993 ...............................................18 PD CEN/TR 15996 ...............................................18

Alpha-numeric sequence of British Standards quoted in this issue BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

611 ..........................................................14, 23 799 ..................................................................8 848 ................................................................12 1384 ........................................................16, 23 2000 .................................................11, 12, 24 3385 ..............................................................23 3455 ..............................................................23 3510 ..............................................................23 3664 ..............................................................23 3775 ..............................................................23 3890 ..............................................................23 3951 ..............................................................20 4247 ..............................................................23 4248 ........................................................14, 23 4540 ........................................................10, 23 4607 ..............................................................20 4899 ..............................................................23 5045 ..............................................................23 5288 ..............................................................23 5724 ........................................................15, 16 5950 ..............................................................23 5974 ................................................................8 6100 ................................................................8

Prices may be subject to change.

BS 6200 ........................................................11, 23 BS 6201 ........................................................15, 23 BS 6339 ........................................................12, 25 BS 6580 ................................................................8 BS 6701 ................................................................8 BS 6911 ........................................................17, 23 BS 7723 ........................................................17, 24 BS 7772 ..............................................................16 BS 7780 ........................................................16, 24 BS 7839 ........................................................17, 24 BS 8517 ................................................................8 BS 9295 ................................................................8 BS 10999 ..............................................................8 DD 261 ...............................................................18 DD CEN/TS 13307 ..............................................18 DD CEN/TS 14961 ........................................12, 24 DD CEN/TS 15366 ..............................................18 DD CEN/TS 15656 ..............................................18 DD CEN/TS 15674 ..............................................22 DD CEN/TS 15675 ..............................................22 DD CEN ISO/TS 10272 ........................................18 DD CEN ISO/TS 16634 ........................................18 DD CEN ISO/TS 17234 ..................................14, 24 BS EN 81 ............................................................19 BS EN ISO 105 ......................................................8 BS EN 196 ............................................................8 BS EN 208 ............................................................8 BS EN 249 ............................................................8 BS EN 267 ............................................................8 BS EN 338 ............................................................8 BS EN 453 ..........................................................20 BS EN 550 ..........................................................24 BS EN 597 ..........................................................22 BS EN 632 ....................................................11, 24 BS EN 869 ..........................................................20 BS EN 980 ..........................................................24 BS EN 1007 ..........................................................8 BS EN 1022 ........................................................22 BS EN 1023 ........................................................22 BS EN 1057 ........................................................20 BS EN 1071 ........................................................19 BS EN 1129 ........................................................22 BS EN 1130 ........................................................22 BS EN 1236 ........................................................26 BS EN 1237 ........................................................26 BS EN ISO 1248 ..................................................19 BS EN 1334 ........................................................22 BS EN 1495 ........................................................20 BS EN 1501 ........................................................21 BS EN 1656 ..........................................................8 BS EN 1676 ..........................................................8 BS EN 1706 ........................................................10 BS EN 1713 ..................................................14, 24 BS EN 1725 ........................................................22 BS EN 1820 ........................................................21 BS EN 1870 ........................................................21 BS EN 1994 ........................................................23 BS EN 1996 ........................................................19 BS EN 1999 ........................................................21 BS EN 2240 ........................................................10 BS EN ISO 2825 ............................................10, 23 BS EN 2863 ........................................................10 BS EN 2954 ........................................................10 BS EN ISO 3175 ............................................10, 11 BS EN 3226 ........................................................11 BS EN 3227 ........................................................11 BS EN 3537 ........................................................11 BS EN 3538 ........................................................11 BS EN 3539 ........................................................11

5

Alpha-numeric sequence of British Standards continued... BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

6

EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN EN

3660 ........................................................11 3753 ........................................................11 ISO 3908 ............................................11, 24 ISO 3924 ..................................................11 ISO 4254 ............................................11, 24 4474 ........................................................11 4632 ........................................................11 4662 ........................................................11 ISO 4945 ............................................11, 23 ISO 5821 ............................................11, 24 6069 ........................................................11 ISO 7096 ..................................................19 ISO 7837 ..................................................26 ISO 7885 ..................................................11 ISO 9445 ............................................11, 24 10283 ......................................................11 ISO 10993 ................................................12 ISO 11111 ..........................................12, 21 ISO 11135 ................................................24 ISO 11295 ..........................................12, 24 ISO 11737 ................................................12 12062 ................................................14, 24 12183 ......................................................12 12184 ......................................................12 12269 ......................................................12 12342 ......................................................21 12472 ......................................................21 12507 ......................................................12 ISO 12625 ................................................12 12663 ......................................................12 12727 ......................................................22 12864 ......................................................21 12878 ......................................................26 12965 ......................................................21 13001 ......................................................21 13034 ......................................................21 13084 ......................................................19 13301 ......................................................12 13302 ................................................12, 24 13322 ................................................19, 23 ISO 13351 ..........................................12, 25 13366 ......................................................26 13368 ......................................................26 13418 ......................................................21 13507 ......................................................12 13544 ......................................................21 ISO 13606 ................................................12 13689 ................................................12, 24 13702 ................................................12, 24 13900 ......................................................26 ISO 14001 ................................................19 14279 ......................................................21 ISO 14419 ................................................12 14605 ......................................................21 14695 ......................................................12 14787 ......................................................26 14884 ......................................................22 14888 ......................................................26 14896 ................................................12, 24 14910 ......................................................21 ISO 14937 ................................................12 14961 ................................................12, 24 15056 ......................................................21 15269 ......................................................12 15304 ......................................................12 ISO 15487 ................................................12 15543 ......................................................19 15622 ......................................................14 15636 ......................................................14

BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS BS

EN 15651 ......................................................14 EN 15743 ................................................14, 23 EN 15845 ......................................................14 EN 15848 ......................................................14 EN 15882 ......................................................14 EN ISO 17234 ..........................................14, 24 EN ISO 17635 ..........................................14, 24 EN ISO 19739 ................................................19 EN ISO 20795 ................................................14 EN ISO 20815 ................................................14 EN ISO 21533 ................................................19 EN ISO 21969 ................................................14 EN ISO 23279 ..........................................14, 24 EN 23908 ................................................11, 24 EN ISO 24998 ..........................................14, 23 EN 25821 ................................................11, 24 EN 45502 ......................................................14 EN 50015 ......................................................24 EN 50065 ......................................................21 EN 50131 ................................................14, 24 EN 50290 ......................................................14 EN 50364 ......................................................14 EN 50366 ......................................................19 EN 50397 ......................................................14 EN 50411 ......................................................15 EN 55015 ......................................................19 EN 60079 ................................................24, 25 EN 60318 ................................................15, 24 EN 60335 ..........................................15, 19, 22 EN 60384 ........................15, 19, 20, 23, 24, 25 EN 60601 ................................................15, 16 EN 60630 ......................................................22 EN 60730 ................................................15, 22 EN 60745 ................................................15, 24 EN 60809 ......................................................22 EN 61010 ......................................................22 EN 61029 ......................................................15 EN 61051 ................................................20, 25 EN 61280 ......................................................15 EN 61300 ................................................15, 23 EN 61347 ......................................................22 EN 61557 ......................................................24 EN 61753 ......................................................15 EN 61755 ......................................................15 EN 61850 ......................................................15 EN 61869 ......................................................16 EN 61918 ......................................................16 EN 62002 ......................................................16 EN 62083 ......................................................16 EN 62148 ......................................................16 EN 62333 ......................................................16 EN 62493 ......................................................16 EN 80601 ......................................................16 ISO 5 .......................................................16, 23 ISO 3547 .......................................................22 ISO 3548 .......................................................16 ISO 3780 .................................................16, 26 ISO 3890 .......................................................16 ISO 4251 .................................................16, 26 ISO 6194 .................................................16, 24 ISO 6550 .......................................................16 ISO 6580 .................................................12, 25 ISO 7176 .................................................16, 17 ISO 7507 .................................................17, 24 ISO 7612 .......................................................17 ISO 8779 .......................................................17 ISO 9211 .......................................................17 ISO 10191 ...............................................17, 26 ISO 10265 ...............................................17, 23

Prices may be subject to change.

BS ISO 10679 .....................................................17 BS ISO 10911 ...............................................17, 24 BS ISO 11929 ...............................................17, 25 BS ISO 12188 .....................................................17 BS ISO 12214 .....................................................17 BS ISO 12643 .....................................................17 BS ISO/IEC 13335 ...............................................25 BS ISO 14436 .....................................................17 BS ISO/TR 14696 .................................................25 BS ISO 16110 .....................................................17 BS ISO 16750 .....................................................17 BS ISO 16992 .....................................................17 BS ISO 17321 .....................................................22 BS ISO 19334 .....................................................17 BS ISO 23954 .....................................................17 BS ISO/IEC 24735 ...............................................17 BS ISO 27025 .....................................................17 BS ISO 27894 .....................................................17 BS ISO 28078 .....................................................18 BS ISO 31000 .....................................................18 BS ISO 81060 .....................................................18 BS IEC 60079 ......................................................25 BS IEC 61010 ......................................................25 BS CECC 30801 ..................................................24 DD ISO/TS 21547 ................................................18 DD ISO/TS 27105 ................................................19 DD ISO/TS 27106 ................................................19 DD ISO/TS 27790 ................................................19 DD CLC/TS 50131 ........................................14, 24 DD CLC/TS 61850 ........................................19, 25 DD IEC/TS 61850 ..........................................19, 25 PD CEN/TR 14383 ...............................................18 PD CEN/TR 15874 ...............................................18 PD CEN/TR 15993 ...............................................18 PD CEN/TR 15996 ...............................................18 PD ISO/TR 11633 ................................................18 PD ISO/TR 11636 ................................................18 PD ISO/TR 12309 ................................................18 PD ISO/IEC TR 18018 ..........................................18 PD CLC/TR 50542 ...............................................18 PD IEC/TR 61292 ................................................18 PD IEC/TR 61341 ................................................18 PD IEC/TR 62476 ................................................18 BS 4A 113 ..........................................................20 BS 4A 114 ..........................................................20 BS 4S 500 ...........................................................19 BS 3S 500 ...........................................................19 BS QC 300000 .............................................15, 24 BS QC 300100 .............................................15, 24 BS QC 300301 ....................................................24 BS QC 300400 ....................................................24 BS QC 300401 ....................................................24 BS QC 300600 ....................................................24 BS QC 300601 ....................................................25 BS QC 300700 ....................................................25 BS QC 300701 ....................................................25 BS QC 300801 ....................................................25 BS QC 301200 ....................................................25 BS QC 301201 ....................................................25 BS QC 301800 ....................................................25 BS QC 301900 ....................................................25 BS QC 301901 ....................................................25 BS QC 420000 ....................................................25 BS AU 50 ................................................16, 17, 26 BS AU 175 ....................................................16, 26 NA to BS EN 1993 ................................................8 NA to BS EN 1999 ..............................................22

Update Standards May 2010

British Standards

BRITISH STANDARDS The following British Standard publications are available from BSI Customer Services (see ’How to order’ on page 2). The publications listed below are new and revised British Standards that were made available last month. An existing BSI publication bearing a number identical to one announced below is automatically withdrawn unless stated otherwise. In all other cases of supersession, details are given and a corresponding entry appears in the ’British Standards withdrawn’ section. BRITISH STANDARD IMPLEMENTATIONS WILL BE SUPPLIED IN PREFERENCE TO EUROPEAN OR INTERNATIONAL STANDARDS, UNLESS OTHERWISE REQUESTED. Please order by the British Standard reference not the ISBN number. BS 2000 series standards are also available from:– Library of the Energy Institute 61 New Cavendish Street London W1G 7AR Tel: 020 7467 7100 Fax: 020 7255 1472 Email: [email protected] For this series, member pricing is applicable to BSI and Energy Institute members. BS 799-5:2010 Oil burning equipment. Carbon steel oil storage tanks. Specification supersedes BS 799-5:1987 ISBN 978 0 580 59342 0 £71.00 members, £142.00 non-members RHE/13

BS 5974:2010 Code of practice for the planning, design, setting up and use of temporary suspended access equipment supersedes BS 5974:1990 ISBN 978 0 580 53086 9 £86.00 members, £172.00 non-members B/514/39

BS 6701:2010

BS EN 196-6:2010

Telecommunications equipment and telecommunications cabling. Specification for installation, operation and maintenance

Methods of testing cement. Determination of fineness

supersedes BS 6701:2004 ISBN 978 0 580 67615 4 £43.00 members, £86.00 non-members

B/516

TCT/7

BS EN 208:2009 Security dogs. Code of practice for the use of detection dogs

Personal eye-protection. Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)

no current standard is superseded ISBN 978 0 580 66766 4 £62.00 members, £124.00 non-members

supersedes BS EN 208:1999 ISBN 978 0 580 59669 8 £62.00 members, £124.00 non-members

GW/3

PH/2

BS 8517-2:2010

BS 9295:2010

BS EN 249:2010

Guide to the structural design of buried pipelines

Sanitary appliances. Shower trays made from crosslinked cast acrylic sheets. Requirements and test methods

no current standard is superseded ISBN 978 0 580 60100 2 £86.00 members, £172.00 non-members

no current standard is superseded ISBN 978 0 580 65899 0 £43.00 members, £86.00 non-members

B/505

B/503

BS 10999:2010

BS EN 267:2009

Specification for distress signal units for the fire and rescue service

Automatic forced draught burners for liquid fuels

no current standard is superseded ISBN 978 0 580 65704 7 £35.00 members, £70.00 non-members

supersedes BS EN 267:1999 ISBN 978 0 580 56206 8 £93.00 members, £186.00 non-members

PH/4

GSE/27

NA to BS EN 1993-3-1:2006 UK National Annex to Eurocode 3. Design of steel structures. Towers, masts and chimneys. Towers and masts no current standard is superseded ISBN 978 0 580 55088 1 £62.00 members, £124.00 non-members B/525/32

BS EN PUBLICATIONS

BS EN 338:2009 Structural timber. Strength classes supersedes BS EN 338:2003 ISBN 978 0 580 58144 1 £35.00 members, £70.00 non-members B/518

BS EN 1007-5:2010 Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature

The following are British Standard implementations of the English language versions of European Standards (ENs).

supersedes BS EN 1007-5:2003 ISBN 978 0 580 63432 1 £43.00 members, £86.00 non-members

BSI has an obligation to publish all ENs and to withdraw any conflicting British Standards. This has led to a series of standards, BS ENs, using the EN number.

RPI/13

Building and civil engineering. Vocabulary. Introduction and index

Note: The date referenced in the identifier is the date of the European standard.

supersedes BS 6100-0:2002 ISBN 978 0 580 53722 6 £93.00 members, £186.00 non-members

BS EN ISO 105-C08:2010

BS 6100-0:2010

supersedes BS EN 196-6:1992 ISBN 978 0 580 62238 0 £71.00 members, £142.00 non-members

BS EN 1656:2009 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area. Test method and requirements (phase 2, step 1) supersedes BS EN 1656:2000 ISBN 978 0 580 65021 5 £71.00 members, £142.00 non-members CH/216

Specification for corrosion inhibiting, engine coolant concentrate (“antifreeze”)

Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator

supersedes BS 6580:1992+A1:1993 ISBN 978 0 580 70794 0 £35.00 members, £70.00 non-members

supersedes BS EN ISO 105-C08:2002+A1:2008 ISBN 978 0 580 66849 4 £43.00 members, £86.00 non-members

supersedes BS EN 1676:1997 ISBN 978 0 580 63426 0 £43.00 members, £86.00 non-members

I/-

TCI/81

NFE/35

B/500/-/1

BS 6580:2010

8

Prices may be subject to change.

BS EN 1676:2010 Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications

Update Standards May 2010

BS EN Publications continued... BS EN 1706:2010

BS EN 2240-028:2010

BS EN 2240-037:2010

Aluminium and aluminium alloys. Castings. Chemical composition and mechanical properties

Aerospace series. Lamps, incandescent. Lamp, code 337. Product standard

Aerospace series. Lamps, incandescent. Lamp, code 394. Product standard

no current standard is superseded ISBN 978 0 580 69399 1 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 69539 1 £35.00 members, £70.00 non-members

ACE/6

ACE/6

supersedes BS EN 1706:1998 ISBN 978 0 580 63427 7 £62.00 members, £124.00 non-members NFE/35

BS EN 2240-029:2010 BS EN 2240-021:2010 Aerospace series. Lamps, incandescent. Lamp, code 313. Product standard no current standard is superseded ISBN 978 0 580 69392 2 £35.00 members, £70.00 non-members

Aerospace series. Lamps, incandescent. Lamp, code 338. Product standard no current standard is superseded ISBN 978 0 580 69400 4 £35.00 members, £70.00 non-members ACE/6

ACE/6

BS EN 2240-022:2010 Aerospace series. Lamps, incandescent. Lamp, code 315. Product standard no current standard is superseded ISBN 978 0 580 69393 9 £35.00 members, £70.00 non-members

Aerospace series. Lamps, incandescent. Lamp, code 316. Product standard no current standard is superseded ISBN 978 0 580 69394 6 £35.00 members, £70.00 non-members ACE/6

Aerospace series. Lamps, incandescent. Lamp, code 401. Product standard no current standard is superseded ISBN 978 0 580 69540 7 £35.00 members, £70.00 non-members ACE/6

BS EN 2240-039:2010 BS EN 2240-030:2010 Aerospace series. Lamps, incandescent. Lamp, code 345. Product standard no current standard is superseded ISBN 978 0 580 69401 1 £35.00 members, £70.00 non-members

Aerospace series. Lamps, incandescent. Lamp, code 600. Product standard no current standard is superseded ISBN 978 0 580 69541 4 £35.00 members, £70.00 non-members ACE/6

ACE/6

BS EN 2240-040:2010

ACE/6

BS EN 2240-023:2010

BS EN 2240-038:2010

BS EN 2240-031:2010 Aerospace series. Lamps, incandescent. Lamp, code 356. Product standard no current standard is superseded ISBN 978 0 580 69532 2 £35.00 members, £70.00 non-members ACE/6

Aerospace series. Lamps, incandescent. Lamp, code 680. Product standard no current standard is superseded ISBN 978 0 580 69542 1 £35.00 members, £70.00 non-members ACE/6

BS EN ISO 2825:2010 Spices and condiments. Preparation of a ground sample for analysis

BS EN 2240-024:2010 Aerospace series. Lamps, incandescent. Lamp, code 327. Product standard no current standard is superseded ISBN 978 0 580 69395 3 £35.00 members, £70.00 non-members ACE/6

BS EN 2240-032:2010 Aerospace series. Lamps, incandescent. Lamp, code 376. Product standard no current standard is superseded ISBN 978 0 580 69533 9 £35.00 members, £70.00 non-members

supersedes BS 4540-2:1982 ISBN 978 0 580 68789 1 £35.00 members, £70.00 non-members AW/7

BS EN 2863:2010

ACE/6

BS EN 2240-025:2010

BS EN 2240-033:2010

Aerospace series. Lamps, incandescent. Lamp, code 328. Product standard

Aerospace series. Lamps, incandescent. Lamp, code 377. Product standard

no current standard is superseded ISBN 978 0 580 69396 0 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 69535 3 £35.00 members, £70.00 non-members

ACE/6

ACE/6

Aerospace series. Nuts, anchor, self-locking, fixed, 90º corner, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºC no current standard is superseded ISBN 978 0 580 70735 3 £35.00 members, £70.00 non-members ACE/12

BS EN 2954-002:2010

BS EN 2240-026:2010

BS EN 2240-034:2010

Aerospace series. Lamps, incandescent. Lamp, code 330. Product standard

Aerospace series. Lamps, incandescent. Lamp, code 382. Product standard

no current standard is superseded ISBN 978 0 580 69397 7 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 69536 0 £35.00 members, £70.00 non-members

ACE/6

ACE/6

Aerospace series. Macrostructure of titanium and titanium alloy wrought products. Macrostructure of bar, section, forging stock and forgings no current standard is superseded ISBN 978 0 580 70736 0 £62.00 members, £124.00 non-members ACE/61/-/49

BS EN ISO 3175-1:2010 BS EN 2240-027:2010

BS EN 2240-035:2010

Aerospace series. Lamps, incandescent. Lamp, code 334. Product standard

Aerospace series. Lamps, incandescent. Lamp, code 387. Product standard

Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Assessment of performance after cleaning and finishing

no current standard is superseded ISBN 978 0 580 69398 4 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 69537 7 £35.00 members, £70.00 non-members

supersedes BS EN ISO 3175-1:1998 ISBN 978 0 580 68536 1 £43.00 members, £86.00 non-members

ACE/6

ACE/6

TCI/82

10

Prices may be subject to change.

Update Standards May 2010

BS EN ISO 3175-2:2010

BS EN 3753:2010

BS EN 4662:2010

Textiles. Professional care, drycleaning and wetcleaning of fabrics and garments. Procedure for testing performance when cleaning and finishing using tetrachloroethene

Aerospace series. Nuts, anchor, self-locking, fixed, 60º corner, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/235ºC

Aerospace series. Test specification for vibration control components

supersedes BS EN ISO 3175-2:1998 ISBN 978 0 580 68537 8 £43.00 members, £86.00 non-members TCI/82

no current standard is superseded ISBN 978 0 580 70743 8 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 69531 5 £35.00 members, £70.00 non-members ACE/12

ACE/12

BS EN ISO 4945:2009

BS EN 3226:2009 Aerospace series. Nuts, hexagon, plain, normal height, normal across flats, steel, cadmium plated. Classification: 1100 MPa/235ºC no current standard is superseded ISBN 978 0 580 68929 1 £35.00 members, £70.00 non-members ACE/12

BS EN ISO 3908:2009 Hardmetals. Determination of insoluble (free) carbon. Gravimetric method supersedes BS EN 23908:1993 ISBN 978 0 580 56455 0 £35.00 members, £70.00 non-members

Steel. Determination of nitrogen content. Spectrophotometric method supersedes BS 6200-3.22.2:1985 ISBN 978 0 580 68220 9 £35.00 members, £70.00 non-members ISE/102

ISE/65

BS EN ISO 5821:2009

BS EN 3227:2010 Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, in steel, cadmium plated, left hand thread. Classification: 1100 MPa (at ambient temperature)/235ºC no current standard is superseded ISBN 978 0 580 70737 7 £35.00 members, £70.00 non-members ACE/12

Resistance welding. Spot welding electrode caps

BS EN ISO 3924:2010 (BS 2000-582:2010) Petroleum products. Determination of boiling range distribution. Gas chromatography method no current standard is superseded ISBN 978 0 580 63620 2 £19.50 members, £26.00 non-members PTI/13

BS EN 3537:2010 Aerospace series. Nuts, anchor, self-locking, fixed, two lug, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºC no current standard is superseded ISBN 978 0 580 70740 7 £35.00 members, £70.00 non-members ACE/12

BS EN 3538:2010 Aerospace series. Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºC no current standard is superseded ISBN 978 0 580 70741 4 £35.00 members, £70.00 non-members ACE/12

Available from the Institute of Petroleum, see the ’British Standards’ section foreword for ordering information.

supersedes BS EN 25821:1992 ISBN 978 0 580 65944 7 £43.00 members, £86.00 non-members WEE/29

BS EN 6069:2009 Aerospace series. Rivet, 100º reduced flush head, close tolerance. Inch series no current standard is superseded ISBN 978 0 580 61662 4 £35.00 members, £70.00 non-members ACE/12

BS EN ISO 4254-1:2009 Agricultural machinery. Safety. General requirements supersedes BS EN ISO 4254-1:2005 ISBN 978 0 580 62895 5 £81.00 members, £162.00 non-members AGE/6

BS EN ISO 7885:2010 Dentistry. Sterile injection needles for single use supersedes BS EN ISO 7885:2001 ISBN 978 0 580 59580 6 £35.00 members, £70.00 non-members CH/106/4

BS EN ISO 4254-7:2009 Agricultural machinery. Safety. Combine harvesters, forage harvesters and cotton harvesters supersedes BS EN 632:1996 ISBN 978 0 580 53435 5 £86.00 members, £172.00 non-members AGE/32

BS EN 3539:2010

BS EN ISO 9445-1:2010 Continuously cold-rolled stainless steel. Tolerances on dimensions and form. Narrow strip and cut lengths supersedes BS EN ISO 9445:2006 ISBN 978 0 580 60753 0 £43.00 members, £86.00 non-members ISE/105

Aerospace series. Nuts, anchor, self-locking, one lug, fixed, with counterbore, in heat resisting steel, MoS2 lubricated. Classification: 1100 MPa (at ambient temperature)/315ºC

BS EN 4474:2009

no current standard is superseded ISBN 978 0 580 70742 1 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 67163 0 £35.00 members, £70.00 non-members

ACE/12

ACE/61

Aerospace series. Aluminium pigmented coatings. Coating methods

BS EN 3660-021:2009

BS EN ISO 9445-2:2010 Continuously cold-rolled stainless steel. Tolerances on dimensions and form. Wide strip and plate/sheet supersedes BS EN ISO 9445:2006 ISBN 978 0 580 60754 7 £43.00 members, £86.00 non-members ISE/105

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors. Cable outlet, style A, 90º, unsealed, self-locking with clamp strain relief for EN 3645. Product standard

BS EN 4632-005:2009 Aerospace series. Weldability and brazeability of materials in aerospace constructions. Homogeneous assemblies of heat resisting Ni or Co base alloys

BS EN 10283:2010

no current standard is superseded ISBN 978 0 580 61333 3 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 58876 1 £81.00 members, £162.00 non-members

supersedes BS EN 10283:1999 ISBN 978 0 580 58534 0 £43.00 members, £86.00 non-members

ACE/6

ACE/61/-/2

ISE/111

Update Standards May 2010

Prices may be subject to change.

Corrosion resistant steel castings

11

BS EN Publications continued... BS EN ISO 10993-16:2010

BS EN ISO 12625-12:2010

BS EN ISO 14419:2010

Biological evaluation of medical devices. Toxicokinetic study design for degradation products and leachables

Tissue paper and tissue products. Determination of tensile strength of perforated lines. Calculation of perforation efficiency

Textiles. Oil repellency. Hydrocarbon resistance test

supersedes BS EN ISO 10993-16:2009 ISBN 978 0 580 64243 2 £43.00 members, £86.00 non-members

no current standard is superseded ISBN 978 0 580 63332 4 £62.00 members, £124.00 non-members

CH/194

PAI/11

supersedes BS EN ISO 14419:1999 ISBN 978 0 580 68538 5 £35.00 members, £70.00 non-members TCI/24

BS EN 12663-1:2010 BS EN ISO 11111-1:2009 Textile machinery. Safety requirements. Common requirements supersedes BS EN ISO 11111-1:2005 ISBN 978 0 580 63222 8 £93.00 members, £186.00 non-members TCI/33

Railway applications. Structural requirements of railway vehicle bodies. Locomotives and passenger rolling stock (and alternative method for freight wagons) supersedes BS EN 12663:2000 which remains current ISBN 978 0 580 58608 8 £71.00 members, £142.00 non-members RAE/1/-/2

BS EN 14695:2010 Flexible sheets for waterproofing. Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete. Definitions and characteristics no current standard is superseded ISBN 978 0 580 53869 8 £62.00 members, £124.00 non-members B/546/9

BS EN ISO 11295:2010 Classification and information on design of plastics piping systems used for renovation

BS EN 13301:2010 (BS 2000-504:2010)

supersedes BS EN 13689:2002 ISBN 978 0 580 61030 1 £71.00 members, £142.00 non-members

Bitumen and bituminous binders. Determination of staining tendency of bitumen

PRI/88/3

BS EN ISO 11737-2:2009 Sterilization of medical devices. Microbiological methods. Tests of sterility performed in the definition, validation and maintenance of a sterilization process supersedes BS EN ISO 11737-2:2000 ISBN 978 0 580 57852 6 £62.00 members, £124.00 non-members CH/198

BS EN 12183:2009

supersedes the dual numbered standard BS EN 13301:2003, BS 2000-504:2003 ISBN 978 0 580 62919 8 £19.50 members, £26.00 non-members PTI/13

Available from the Institute of Petroleum, see the ’British Standards’ section foreword for ordering information.

BS EN 13302:2010 (BS 2000-505:2010) Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus

supersedes BS EN 12183:1999 ISBN 978 0 580 65399 5 £81.00 members, £162.00 non-members

supersedes the dual numbered standards BS EN 13302:2003, BS 2000-505:2003, BS EN 13702-2:2003, BS 2000-514:2003 and BS EN 14896:2006, BS 2000-546:2006 ISBN 978 0 580 62920 4 £19.50 members, £26.00 non-members

CH/173/1

PTI/13

Manual wheelchairs. Requirements and test methods

BS EN 12184:2009 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods supersedes BS EN 12184:1999 ISBN 978 0 580 65400 8 £86.00 members, £172.00 non-members CH/173/1

BS EN 12269-2:2010 Determination of the bond behaviour between reinforcing steel and autoclaved aerated concrete by the beam test. Long term test supersedes BS EN 12269-2:2003 ISBN 978 0 580 64059 9 £35.00 members, £70.00 non-members

Available from the Institute of Petroleum, see the ’British Standards’ section foreword for ordering information.

BS EN ISO 13351:2009 Fans. Dimensions supersedes the dual numbered standards BS ISO 6580:2005, BS 6339:2005 and BS EN ISO 13351:2008, BS 848-4:1997 ISBN 978 0 580 65054 3 £43.00 members, £86.00 non-members

Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices supersedes BS EN ISO 14937:2001 ISBN 978 0 580 57850 2 £86.00 members, £172.00 non-members CH/198

BS EN 14961-1:2010 Solid biofuels. Fuel specifications and classes. General requirements supersedes DD CEN/TS 14961:2005 ISBN 978 0 580 67082 4 £86.00 members, £172.00 non-members PTI/17

BS EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. General requirements no current standard is superseded ISBN 978 0 580 55699 9 £35.00 members, £70.00 non-members FSH/22/5

MCE/17

BS EN 15304:2010

BS EN 13507:2010

Determination of the freeze-thaw resistance of autoclaved aerated concrete

Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying

B/523

supersedes BS EN 13507:2001 ISBN 978 0 580 63434 5 £35.00 members, £70.00 non-members

BS EN 12507:2005

STI/40

Transportation services. Guidance notes on the application of EN ISO 9001:2000 to the road transportation, storage, distribution and railway goods industries

BS EN ISO 14937:2009

supersedes BS EN 15304:2007 ISBN 978 0 580 63431 4 £43.00 members, £86.00 non-members B/523

BS EN ISO 15487:2010 BS EN ISO 13606-5:2010 Health informatics. Electronic health record communication. Interface specification

Textiles. Method for assessing appearance of apparel and other textile end products after domestic washing and drying

supersedes BS EN 12507:2000 ISBN 978 0 580 53848 3 £43.00 members, £86.00 non-members

no current standard is superseded ISBN 978 0 580 60129 3 £62.00 members, £124.00 non-members

supersedes BS EN ISO 15487:2001 ISBN 978 0 580 64861 8 £43.00 members, £86.00 non-members

TW/2

IST/35

TCI/82

12

Prices may be subject to change.

Update Standards May 2010

BS EN Publications continued... BS EN 15622:2010

BS EN 15845:2010

BS EN ISO 23279:2010

Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS)

Paper and board. Determination of the cytotoxicity of aqueous extracts

Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds

no current standard is superseded ISBN 978 0 580 63309 6 £43.00 members, £86.00 non-members

supersedes BS EN 1713:1998 ISBN 978 0 580 57190 9 £43.00 members, £86.00 non-members

PAI/11

WEE/46

no current standard is superseded ISBN 978 0 580 58190 8 £43.00 members, £86.00 non-members NFE/34

BS EN 15848:2010 BS EN 15636:2010

BS EN ISO 24998:2008 Plastics laboratory ware. Single-use Petri dishes for microbiological procedures

Sanitary appliances. Shower trays made from impact modified extruded acrylic sheets. Requirements and test methods

Water conditioning equipment inside buildings. Adjustable chemical dosing systems. Requirements for performance, safety and testing

no current standard is superseded ISBN 978 0 580 65900 3 £43.00 members, £86.00 non-members

no current standard is superseded ISBN 978 0 580 63362 1 £43.00 members, £86.00 non-members

B/503

B/504/-/13

BS EN 45502-2-3:2010

BS EN 15882-3:2009

Active implantable medical devices. Particular requirements for cochlear and auditory brainstem implant systems

BS EN 15651-1:2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for facade elements no current standard is superseded ISBN 978 0 580 58515 9 £43.00 members, £86.00 non-members B/547

BS EN 15651-2:2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for glazing no current standard is superseded ISBN 978 0 580 58750 4 £43.00 members, £86.00 non-members B/547

Extended applications of results from fire resistance tests for service installations. Penetration seals no current standard is superseded ISBN 978 0 580 62600 5 £43.00 members, £86.00 non-members FSH/22

BS EN ISO 17234-1:2010 Leather. Chemical tests for the determination of certain azo colorants in dyed leathers. Determination of certain aromatic amines derived from azo colorants supersedes DD CEN ISO/TS 17234:2003 ISBN 978 0 580 62590 9 £35.00 members, £70.00 non-members TCI/69

BS EN 15651-3:2010 Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for sanitary joints no current standard is superseded ISBN 978 0 580 58614 9 £35.00 members, £70.00 non-members B/547

BS EN ISO 17635:2010 Non-destructive testing of welds. General rules for metallic materials supersedes BS EN 12062:1998 ISBN 978 0 580 55935 8 £62.00 members, £124.00 non-members WEE/46

BS EN 15651-4:2010

supersedes BS 611-2:1990 ISBN 978 0 580 58562 3 £43.00 members, £86.00 non-members LBI/36/1

no current standard is superseded ISBN 978 0 580 70990 6 £81.00 members, £162.00 non-members CH/150/6

BS EN 50131-4:2009 Alarm systems. Intrusion and hold-up systems. Warning devices supersedes DD CLC/TS 50131-4:2006 ISBN 978 0 580 62769 9 £71.00 members, £142.00 non-members GW/1/1

BS EN 50290-4-2:2008 Communication cables. General considerations for the use of cables. Guide to use no current standard is superseded ISBN 978 0 580 57441 2 £71.00 members, £142.00 non-members EPL/46

BS EN 50364:2010 Limitation of human exposure to electromagnetic fields from devices operating in the frequency range 0 Hz to 300 GHz, used in electronic article surveillance (EAS), radio frequency identification (RFID) and similar applications

Sealants for non-structural use in joints in buildings and pedestrian walkways. Sealants for pedestrian walkways

BS EN ISO 20795-2:2010

no current standard is superseded ISBN 978 0 580 58351 3 £43.00 members, £86.00 non-members

no current standard is superseded ISBN 978 0 580 59587 5 £71.00 members, £142.00 non-members

B/547

CH/106/2

BS EN 50397-3:2010

BS EN 15651-5:2010

BS EN ISO 20815:2010

Sealants for non-structural use in joints in buildings and pedestrian walkways. Evaluation of conformity and marking

Petroleum, petrochemical and natural gas industries. Production assurance and reliability management

Covered conductors for overhead lines and the related accessories for rated voltages above 1 kV A.C. and not exceeding 36 kV A.C. Guide to use

no current standard is superseded ISBN 978 0 580 58372 8 £35.00 members, £70.00 non-members

supersedes BS EN ISO 20815:2008 ISBN 978 0 580 69513 1 £93.00 members, £186.00 non-members

B/547

PSE/17

BS EN 15743:2010

BS EN ISO 21969:2009

Supersulfated cement. Composition, specifications and conformity criteria

High-pressure flexible connections for use with medical gas systems

supersedes BS 4248:2004 ISBN 978 0 580 60504 8 £62.00 members, £124.00 non-members

supersedes BS EN ISO 21969:2006 ISBN 978 0 580 65548 7 £43.00 members, £86.00 non-members

B/516

CH/121/6

14

Dentistry. Base polymers. Orthodontic base polymers

Prices may be subject to change.

supersedes BS EN 50364:2002 ISBN 978 0 580 67433 4 £35.00 members, £70.00 non-members GEL/106

no current standard is superseded ISBN 978 0 580 63095 8 £62.00 members, £124.00 non-members GEL/20/16

To order visit www.bsigroup.com/shop

Update Standards May 2010

BS EN 50411-2-9:2010

BS EN 60745-2-8:2009

BS EN 61300-2-21:2010

Fibre organisers and closures to be used in optical fibre communications systems. Product specifications. Non-sealed closures for air blown fibre microduct cable, for category S & A

Hand-held motor-operated electric tools. Safety. Particular requirements for shears and nibblers

Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Composite temperature/humidity cyclic test

no current standard is superseded ISBN 978 0 580 67251 4 £71.00 members, £142.00 non-members

supersedes BS EN 60745-2-8:2003+A1:2009 which remains current ISBN 978 0 580 64796 3 £43.00 members, £86.00 non-members CPL/116

GEL/86/2

supersedes BS EN 61300-2-21:1997 ISBN 978 0 580 56916 6 £43.00 members, £86.00 non-members GEL/86/2

BS EN 60745-2-9:2009 BS EN 60318-1:2009 Electroacoustics. Simulators of human head and ear. Ear simulator for the measurement of supra-aural and circumaural earphones supersedes BS EN 60318-1:1998 and BS EN 603182:1998 ISBN 978 0 580 56421 5 £62.00 members, £124.00 non-members

Hand-held motor-operated electric tools. Safety. Particular requirements for tappers supersedes BS EN 60745-2-9:2003+A1:2008 which remains current ISBN 978 0 580 64797 0 £43.00 members, £86.00 non-members

BS EN 61753-111-7:2010 Fibre optic interconnecting devices and passive components performance standard. Sealed closures for category A. Aerial

CPL/116

no current standard is superseded ISBN 978 0 580 60420 1 £62.00 members, £124.00 non-members

EPL/29

BS EN 60745-2-14:2009

GEL/86/2

BS EN 60335-2-30:2009

Hand-held motor-operated electric tools. Safety. Particular requirements for planers

Household and similar electrical appliances. Safety. Particular requirements for room heaters supersedes BS EN 60335-2-30:2003 which remains current ISBN 978 0 580 65771 9 £71.00 members, £142.00 non-members

supersedes BS EN 60745-2-14:2003 ISBN 978 0 580 64798 7 £43.00 members, £86.00 non-members CPL/116

BS EN 60745-2-18:2009

CPL/61/07

Hand-held motor-operated electric tools. Safety. Particular requirements for strapping tools

BS EN 60384-1:2009

supersedes BS EN 60745-2-18:2004+A1:2008 which remains current ISBN 978 0 580 64799 4 £35.00 members, £70.00 non-members

Fixed capacitors for use in electronic equipment. Generic specification supersedes BS 6201-1:1982, BS EN 60384-1:2001, BS QC 300000:1983 and BS QC 300100:1991 ISBN 978 0 580 56872 5 £93.00 members, £186.00 non-members

CPL/116

BS EN 60745-2-20:2009

BS EN 61753-111-8:2010 Fibre optic interconnecting devices and passive components performance standard. Sealed closures for category G. Ground no current standard is superseded ISBN 978 0 580 60421 8 £62.00 members, £124.00 non-members GEL/86/2

BS EN 61753-111-9:2010 Fibre optic interconnecting devices and passive components performance standard. Sealed closures for category S. Subterranean no current standard is superseded ISBN 978 0 580 60422 5 £62.00 members, £124.00 non-members

EPL/40X

Hand-held motor-operated electric tools. Safety. Particular requirements for band saws

BS EN 60601-2-41:2009

supersedes BS EN 60745-2-20:2003+A1:2009 which remains current ISBN 978 0 580 64800 7 £43.00 members, £86.00 non-members

GEL/86/2

CPL/116

Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre

Medical electrical equipment. Particular requirements for basic safety and essential performance of surgical luminaires and luminaires for diagnosis supersedes BS EN 60601-2-41:2000 which remains current ISBN 978 0 580 57689 8 £81.00 members, £162.00 non-members CH/62/4

BS EN 60601-2-54:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray equipment for radiography and radioscopy supersedes the dual numbered standards BS EN 60601-2-7:1998, BS 5724-2.7:1998 and BS EN 60601-2-32:1995, BS 5724-2.32:1995 which remain current. Partially supersedes BS EN 60601-228:1993, BS 5724-2.128:1993 ISBN 978 0 580 56960 9 £93.00 members, £186.00 non-members CH/62/2

BS EN 61029-2-9:2009 Safety of transportable motor-operated electric tools. Particular requirements for mitre saws supersedes BS EN 61029-2-9:2002 which remains current ISBN 978 0 580 59415 1 £71.00 members, £142.00 non-members

BS EN 61755-3-1:2009

no current standard is superseded ISBN 978 0 580 53573 4 £43.00 members, £86.00 non-members GEL/86/2

CPL/116

BS EN 61755-3-2:2009 BS EN 61029-2-11:2009 Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws supersedes BS EN 61029-2-11:2003 which remains current ISBN 978 0 580 59697 1 £86.00 members, £172.00 non-members

Fibre optic connector optical interfaces. Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia ferrules for 8 degrees angled-PC single mode fibres no current standard is superseded ISBN 978 0 580 53572 7 £43.00 members, £86.00 non-members GEL/86/2

CPL/116

BS EN 60730-2-4:2007 Automatic electrical controls for household and similar use. Particular requirements for thermal motor protectors for motor-compressors of hermetic and semi-hermetic type supersedes BS EN 60730-2-4:1993 which remains current ISBN 978 0 580 53783 7 £62.00 members, £124.00 non-members CPL/72

Update Standards May 2010

BS EN 61280-1-4:2010

BS EN 61850-6:2010

Fibre optic communication subsystem test procedures. General communication subsystems. Light source encircled flux measurement method

Communication networks and systems for power utility automation. Configuration description language for communication in electrical substations related to IEDs

supersedes BS EN 61280-1-4:2003 ISBN 978 0 580 62538 1 £71.00 members, £142.00 non-members

supersedes BS EN 61850-6:2004 ISBN 978 0 580 56718 6 £128.00 members, £256.00 non-members

GEL/86/3

PEL/57

Prices may be subject to change.

15

BS EN Publications continued... BS EN 61869-1:2009 Instrument transformers. General requirements no current standard is superseded ISBN 978 0 580 65958 4 £86.00 members, £172.00 non-members PEL/38

BS EN 61918:2008 Industrial communication networks. Installation of communication networks in industrial premises no current standard is superseded ISBN 978 0 580 54325 8 £117.00 members, £234.00 non-members AMT/7

BS EN 62002-1:2008 Mobile and portable DVB-T/H radio access. Interface specification supersedes BS EN 62002-1:2006 ISBN 978 0 580 63690 5 £93.00 members, £186.00 non-members EPL/100

BS EN 62083:2009 Medical electrical equipment. Requirements for the safety of radiotherapy treatment planning systems supersedes BS EN 62083:2001 which remains current ISBN 978 0 580 60073 9 £71.00 members, £142.00 non-members CH/62/3

BS IMPLEMENTATIONS BS Implementations comprise the ISO or IEC text without any national deviation and with front and back cover indicating the UK committee responsible. No other information will normally be added.

BS ISO 3890-1:2009 Milk and milk products. Determination of residues of organochlorine compounds (pesticides). General considerations and extraction methods supersedes BS ISO 3890-1:2000 ISBN 978 0 580 67125 8 £62.00 members, £124.00 non-members AW/5

Note: The date referenced in the identifier is the date of the international standard.

BS ISO 3890-2:2009

BS ISO 5-1:2009

Milk and milk products. Determination of residues of organochlorine compounds (pesticides). Test methods for crude extract purification and confirmation

Photography and graphic technology. Density measurements. Geometry and functional notation supersedes BS 1384-1:1985 ISBN 978 0 580 65282 0 £62.00 members, £124.00 non-members CPW/42

BS ISO 5-2:2009 Photography and graphic technology. Density measurements. Geometric conditions for transmittance density supersedes BS 1384-2:2001 ISBN 978 0 580 65283 7 £62.00 members, £124.00 non-members

supersedes BS ISO 3890-2:2000 ISBN 978 0 580 67126 5 £71.00 members, £142.00 non-members AW/5

BS ISO 4251-4:2010 Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre classification and nomenclature supersedes BS AU 50-1.4.3a:1992 ISBN 978 0 580 63233 4 £35.00 members, £70.00 non-members AUE/4

CPW/42

BS ISO 6194-3:2009 BS EN 62148-15:2010 Fibre optic active components and devices. Package and interface standards. Discrete vertical cavity surface emitting laser packages

BS ISO 5-3:2009

no current standard is superseded ISBN 978 0 580 58395 7 £62.00 members, £124.00 non-members

supersedes BS ISO 5-3:1995 ISBN 978 0 580 65284 4 £86.00 members, £172.00 non-members

GEL/86/3

CPW/42

Photography and graphic technology. Density measurements. Spectral conditions

BS EN 62333-3:2010 Noise suppression sheet for digital devices and equipment. Characterization of parameters of noise suppression sheet no current standard is superseded ISBN 978 0 580 61821 5 £43.00 members, £86.00 non-members EPL/51

Rotary shaft lip-type seals incorporating elastomeric sealing elements. Storage, handling and installation supersedes BS 7780-3:1994 ISBN 978 0 580 55228 1 £43.00 members, £86.00 non-members MCE/11

BS ISO 6550-4:2009 BS ISO 5-4:2009 Photography and graphic technology. Density measurements. Geometric conditions for reflection density supersedes BS ISO 5-4:1995 ISBN 978 0 580 65285 1 £62.00 members, £124.00 non-members

Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs supersedes BS ISO 6550-4:2005 ISBN 978 0 580 57271 5 £43.00 members, £86.00 non-members MCE/9

CPW/42

BS EN 62493:2010 Assessment of lighting equipment related to human exposure to electromagnetic fields

BS ISO 3548-2:2009

no current standard is superseded ISBN 978 0 580 61651 8 £71.00 members, £142.00 non-members

Plain bearings. Thin-walled half bearings with or without flange. Measurement of wall thickness and flange thickness

CPL/34

BS EN 80601-2-35:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use supersedes the dual numbered standard BS EN 60601-2-35:1997, BS 5724-2.35:1997 which remains current ISBN 978 0 580 57168 8 £93.00 members, £186.00 non-members CH/62/4

16

supersedes BS 7772:1994 ISBN 978 0 580 60997 8 £43.00 members, £86.00 non-members MCE/12

BS ISO 7176-4:2008 Wheelchairs. Energy consumption of electric wheelchairs and scooters for determination of theoretical distance range supersedes BS ISO 7176-4:1997 ISBN 978 0 580 55402 5 £43.00 members, £86.00 non-members CH/173/1

BS ISO 3780:2009

BS ISO 7176-9:2009

Road vehicles. World manufacturer identifier (WMI) code

Wheelchairs. Climatic tests for electric wheelchairs

supersedes BS AU 175-2b:1983 ISBN 978 0 580 58481 7 £35.00 members, £70.00 non-members

supersedes BS ISO 7176-9:2001 ISBN 978 0 580 62068 3 £43.00 members, £86.00 non-members

AUE/15

CH/173/1

Prices may be subject to change.

Update Standards May 2010

BS ISO 7176-21:2009

BS ISO 10679:2010

BS ISO 16110-2:2010

Wheelchairs. Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers

Steel. Cast tool steel

Hydrogen generators using fuel processing technologies. Test methods for performance

supersedes BS ISO 7176-21:2003 ISBN 978 0 580 58498 5 £62.00 members, £124.00 non-members

no current standard is superseded ISBN 978 0 580 63097 2 £35.00 members, £70.00 non-members ISE/111

no current standard is superseded ISBN 978 0 580 57270 8 £81.00 members, £162.00 non-members PVE/3/8

CH/173/1

BS ISO 7507-4:2010 Petroleum and liquid petroleum products. Calibration of vertical cylindrical tanks. Internal electro-optical distance-ranging method supersedes BS 7723-4:1995 ISBN 978 0 580 69280 2 £62.00 members, £124.00 non-members

BS ISO 10911:2010

BS ISO 16750-2:2010

Solid hardmetal end mills with cylindrical shank. Dimensions

Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Electrical loads

supersedes BS 7839:1995 ISBN 978 0 580 61311 1 £35.00 members, £70.00 non-members MTE/18

supersedes BS ISO 16750-2:2006 ISBN 978 0 580 60871 1 £62.00 members, £124.00 non-members AUE/16

PTI/12

BS ISO 7612:2009 Diesel engines. Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems. Mounting dimensions supersedes BS ISO 7612:2006 ISBN 978 0 580 63392 8 £43.00 members, £86.00 non-members MCE/22

BS ISO 8779:2010

BS ISO 11929:2010

BS ISO 16992:2010

Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation. Fundamentals and application

Passenger car tyres. Spare unit substitutive equipment (SUSE)

supersedes BS ISO 11929-1:2000, BS ISO 119292:2000, BS ISO 11929-3:2000, BS ISO 119294:2001, BS ISO 11929-5:2005, BS ISO 119296:2005, BS ISO 11929-7:2005 and BS ISO 119298:2005 ISBN 978 0 580 59044 3 £93.00 members, £186.00 non-members

PRI/88/2

BS ISO 9211-1:2010 Optics and photonics. Optical coatings. Definitions

STI/3

Tractors and machinery for agriculture and forestry. Test procedures for positioning and guidance systems in agriculture. Dynamic testing of satellite-based positioning devices no current standard is superseded ISBN 978 0 580 63950 0 £43.00 members, £86.00 non-members

CPW/172/3

BS ISO 12214:2010

supersedes BS ISO 9211-2:1994 ISBN 978 0 580 62615 9 £43.00 members, £86.00 non-members

Binders for paints and varnishes. Gum rosin. Gas-chromatographic analysis

BS ISO 12188-1:2010

AGE/6

Optics and photonics. Optical coatings. Optical properties

BS ISO 19334:2010

supersedes BS ISO 19334:2006 ISBN 978 0 580 68304 6 £43.00 members, £86.00 non-members

supersedes BS ISO 9211-1:1994 ISBN 978 0 580 62614 2 £62.00 members, £124.00 non-members

BS ISO 9211-2:2010

AUE/4

NCE/2

Plastics piping systems. Polyethylene (PE) pipes for irrigation. Specifications no current standard is superseded ISBN 978 0 580 60648 9 £62.00 members, £124.00 non-members

supersedes BS ISO 16992:2006 ISBN 978 0 580 65006 2 £43.00 members, £86.00 non-members

BS ISO 23954:2009 Oil of lime expressed, Persian type (Citrus latifolia Tanaka) no current standard is superseded ISBN 978 0 580 56994 4 £43.00 members, £86.00 non-members AW/54

Road vehicles. Direction-of-motion stereotypes for automotive hand controls supersedes BS ISO 12214:2002 ISBN 978 0 580 68914 7 £43.00 members, £86.00 non-members AUE/12

BS ISO/IEC 24735:2009 Information technology. Office equipment. Method for measuring digital copying machine productivity no current standard is superseded ISBN 978 0 580 55475 9 £71.00 members, £142.00 non-members IST/3

CPW/172/3

BS ISO 12643-4:2010 Graphic technology. Safety requirements for graphic technology equipment and systems. Converting equipment and systems

BS ISO 27025:2010

no current standard is superseded ISBN 978 0 580 64656 0 £86.00 members, £172.00 non-members

no current standard is superseded ISBN 978 0 580 57015 5 £86.00 members, £172.00 non-members

PAI/43

ACE/68/-/5

BS ISO 10265:2008

BS ISO 14436:2010

BS ISO 27894:2009

Earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems

Pulps. Standard tap water for drainability measurements. Conductivity 40 mS/m to 150 mS/m

Vacuum technology. Vacuum gauges. Specifications for hot cathode ionization gauges

supersedes BS 6911-14:1998 ISBN 978 0 580 54515 3 £43.00 members, £86.00 non-members

no current standard is superseded ISBN 978 0 580 68400 5 £43.00 members, £86.00 non-members

no current standard is superseded ISBN 978 0 580 63089 7 £62.00 members, £124.00 non-members

B/513/1

PAI/11

MCE/8/-/4

BS ISO 10191:2010 Passenger car tyres. Verifying tyre capabilities. Laboratory test methods supersedes BS AU 50-1.1.4b:1996 ISBN 978 0 580 69281 9 £62.00 members, £124.00 non-members AUE/4

Update Standards May 2010

Prices may be subject to change.

Space systems. Programme management. Quality assurance requirements

17

BS Implementations continued... BS ISO 28078-2:2009

PD CEN/TR 15874:2009

Plastics. Poly(phenylene sulfide) (PPS) moulding and extrusion materials. Preparation of test specimens and determination of properties

Railway applications. Noise emission. Road test of standard for rail roughness measurement EN 15610:2009

no current standard is superseded ISBN 978 0 580 58831 0 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 62516 9 £86.00 members, £172.00 non-members

PRI/82

EH/1/2

BS ISO 31000:2009 Risk management. Principles and guidelines no current standard is superseded ISBN 978 0 580 67571 3 £71.00 members, £142.00 non-members RM/1

BS ISO 81060-2:2009 Non-invasive sphygmomanometers. Clinical validation of automated measurement type no current standard is superseded ISBN 978 0 580 65010 9 £81.00 members, £162.00 non-members CH/121/5

PD CEN/TR 15993:2010 Automotive fuels. Ethanol (E85) automotive fuel. Background to the parameters required and their respective limits and determination no current standard is superseded ISBN 978 0 580 68415 9 £62.00 members, £124.00 non-members PTI/2

PD CEN/TR 15996:2010

Health informatics. Information security management for remote maintenance of medical devices and medical information systems. Requirements and risk analysis

Information technology. Systems and software engineering. Guide for configuration management tool capabilities no current standard is superseded ISBN 978 0 580 61507 8 £71.00 members, £142.00 non-members IST/15

IST/35

PD ISO/TR 11633-2:2009

PD CLC/TR 50542:2010

Health informatics. Information security management for remote maintenance of medical devices and medical information systems. Implementation of an information security management system (ISMS)

Railway applications. Communication means between safety equipment and man-machine interfaces (MMI)

Health informatics. Dynamic on-demand virtual private network for health information infrastructure no current standard is superseded ISBN 978 0 580 61898 7 £93.00 members, £186.00 non-members IST/35

PD ISO/TR 12309:2009 Health informatics. Guidelines for terminology development organizations no current standard is superseded ISBN 978 0 580 66531 8 £43.00 members, £86.00 non-members

DS/1

DD CEN ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs. Horizontal method for detection and enumeration of Campylobacter spp. Semiquantitative method no current standard is superseded ISBN 978 0 580 61509 2 £36.00 members, £72.00 non-members

DD CEN/TS 13307-2:2009

PD ISO/IEC TR 18018:2010

PD ISO/TR 11636:2009

no current standard is superseded ISBN 978 0 580 53865 0 £63.00 members, £126.00 non-members

no current standard is superseded ISBN 978 0 580 68499 9 £62.00 members, £124.00 non-members

PD ISO/TR 11633-1:2009

IST/35

Human reliability. Guide to the fundamental considerations

AW/9

PUBLISHED DOCUMENTS

no current standard is superseded ISBN 978 0 580 67942 1 £93.00 members, £186.00 non-members

DD 261:2010

Hydrometry. Measurement of snow water equivalent using snow mass registration devices

CPI/113

no current standard is superseded ISBN 978 0 580 67870 7 £62.00 members, £124.00 non-members

DRAFTS FOR DEVELOPMENT

no current standard is superseded ISBN 978 0 580 69150 8 £112.00 members, £224.00 non-members

Laminated and finger jointed timber blanks and semi-finished profiles for non-structural uses. Production control no current standard is superseded ISBN 978 0 580 67152 4 £36.00 members, £72.00 non-members B/543

DD CEN/TS 15366:2009 Winter and road service area maintenance equipment. Solid absorbents intended for road usage no current standard is superseded ISBN 978 0 580 66696 4 £36.00 members, £72.00 non-members B/513

DD CEN/TS 15656:2009 Copper and copper alloys. Determination of phosphorus content. Spectrophotometric method

GEL/9

PD IEC/TR 61292-6:2010 Optical amplifiers. Distributed Raman amplification no current standard is superseded ISBN 978 0 580 68575 0 £62.00 members, £124.00 non-members GEL/86/3

no current standard is superseded ISBN 978 0 580 58364 3 £22.00 members, £44.00 non-members NFE/34

DD CEN ISO/TS 16634-2:2009

Method of measurement of centre beam intensity and beam angle(s) of reflector lamps

Food products. Determination of the total nitrogen content by combustion according to the Dumas principle and calculation of the crude protein content. Cereals, pulses and milled cereal products

no current standard is superseded ISBN 978 0 580 67888 2 £35.00 members, £70.00 non-members

no current standard is superseded ISBN 978 0 580 68962 8 £44.00 members, £88.00 non-members

CPL/34/1

AW/4

PD IEC/TR 61341:2010

IST/35

PD IEC/TR 62476:2010 Guidance for evaluation of products with respect to substance-use restrictions in electrical and electronic products

DD ISO/TS 21547:2010

Prevention of crime. Urban planning and building design. Petrol stations no current standard is superseded ISBN 978 0 580 63907 4 £86.00 members, £172.00 non-members

no current standard is superseded ISBN 978 0 580 62007 2 £62.00 members, £124.00 non-members

no current standard is superseded ISBN 978 0 580 63721 6 £82.00 members, £164.00 non-members

B/562

GEL/111

IST/35

PD CEN/TR 14383-5:2010

18

Prices may be subject to change.

Health informatics. Security requirements for archiving of electronic health records. Principles

Update Standards May 2010

DD ISO/TS 27105:2009 Milk and milk products. Determination of hen’s egg white lysozyme by HPLC no current standard is superseded ISBN 978 0 580 64719 2 £22.00 members, £44.00 non-members AW/5

DD ISO/TS 27106:2009 Cheese. Determination of nisin A content by LC-MS and LC-MS-MS no current standard is superseded ISBN 978 0 580 64720 8 £22.00 members, £44.00 non-members AW/5

DD ISO/TS 27790:2009 Health informatics. Document registry framework no current standard is superseded ISBN 978 0 580 60640 3 £44.00 members, £88.00 non-members IST/35

CORRIGENDA TO BRITISH STANDARDS Most amendments are not issued separately. Those that make significant changes to a standard are incorporated into the standard which is reissued (see ‘Updated British Standards’). British Standards which have been corrected via corrigenda are available on request, free of charge to past purchasers of the standard. All amendments and corrigenda to date of despatch are included within any main publication when ordered for the first time. The following corrigenda to British Standards were made available last month.

BS EN 13322-1:2003+A1:2006 Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction. Carbon steel CORRIGENDUM 1 PVE/3/3

Also incorporates Amendment 1

BS EN ISO 14001:2004 Environmental management systems. Requirements with guidance for use CORRIGENDUM 1 SES/1/1

BS EN 15543:2008 Glass packaging. Finishes for bottles. Screw thread finishes for bottles for non-carbonated liquids CORRIGENDUM 1

BS EN 81-3:2000+A1:2008 Safety rules for the construction and installation of lifts. Electric and hydraulic service lifts CORRIGENDUM 1 MHE/4

Also incorporates Amendment 1

PKW/0/-/7

BS EN ISO 19739:2005 Natural gas. Determination of sulfur compounds using gas chromatography CORRIGENDUM 2 PTI/15

DD CLC/TS 61850-80-1:2010 Communication networks and systems for power utility automation. Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104 supersedes DD IEC/TS 61850-80-1:2009 ISBN 978 0 580 69044 0 £99.00 members, £198.00 non-members

BS EN 1071-6:2007 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of the abrasion resistance of coatings by a microabrasion wear test CORRIGENDUM 1 RPI/13

Also incorporates Corrigenda 1

BS EN ISO 21533:2003 Dentistry. Reusable cartridge syringes intended for intraligamentary injections CORRIGENDUM 2 CH/106/4

Also incorporates Corrigenda 1

PEL/57

BS EN ISO 1248:2008

AEROSPACE SERIES BS 4S 500:2010 Aerospace series. Procedure for inspection, testing and acceptance of steel sheet and strip supersedes BS 3S 500:1996+A1:1997 ISBN 978 0 580 67014 5 £71.00 members, £142.00 non-members ACE/61

Iron oxide pigments. Specifications and methods of test STI/1

Also incorporates Corrigenda 1

CORRIGENDUM 1 CPL/61

BS EN 1996-2:2006

Also incorporates Amendment 1

Eurocode 6. Design of masonry structures. Design considerations, selection of materials and execution of masonry

BS EN 55015:2006+A2:2009

CORRIGENDUM 1 B/525/6

BS EN 1996-3:2006 Help Us to Help You!

Eurocode 6. Design of masonry structures. Simplified calculation methods for unreinforced masonry structures CORRIGENDUM 1 B/525/6

Always quote your Customer Number Don’t know your number?

BS EN 50366:2003+A1:2006 Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement

CORRIGENDUM 2

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CORRIGENDUM 1 GEL/210/11

Also incorporates Amendments 1 & 2

BS EN 60335-1:2002+A2:2006 Household and similar electrical appliances. Safety. General requirements

BS EN ISO 7096:2008

CORRIGENDUM 6

Earth-moving machinery. Laboratory evaluation of operator seat vibration

CPL/61

CORRIGENDUM 1

Also incorporates Corrigenda 1, 2, 3, 4 & 5 and Amendments 2, 11, 12 & 13

B/513/1

Contact Customer Services 020 8996 9001 who will be happy to check it for you

Update Standards May 2010

BS EN 60384-2:2005 BS EN 13084-7:2005 Free-standing chimneys. Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners

Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric D.C. capacitors

CORRIGENDUM 1

CORRIGENDUM 1

B/506/14

EPL/40X

Prices may be subject to change.

19

Corrigenda to British Standards continued... BS EN 60384-2-1:2005

BS EN 60384-16-1:2005

Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric D.C. capacitors. Assessment levels E and EZ

Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed metallized polypropylene film dielectric D.C. capacitors. Assessment levels E and EZ

CORRIGENDUM 1

CORRIGENDUM 1 EPL/40X

EPL/40X

UPDATED BRITISH STANDARDS The following standards have been amended and the amendments have been incorporated into an updated standard.

BS EN 60384-21:2004 BS EN 60384-3-1:2006 Fixed capacitors for use in electronic equipment. Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte. Assessment level EZ CORRIGENDUM 2 EPL/40X

Also incorporates Corrigenda 1

BS EN 60384-4-1:2007

Fixed capacitors for use in electronic equipment. Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 CORRIGENDUM 1 EPL/40X

BS EN 60384-21-1:2004 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1. Assessment level EZ

Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed aluminium electrolytic capacitors with non-solid electrolyte. Assessment level EZ

CORRIGENDUM 1

CORRIGENDUM 1

Fixed capacitors for use in electronic equipment. Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2

EPL/40X

BS EN 60384-8:2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 1 CORRIGENDUM 1 EPL/40X

BS EN 60384-8-1:2005

NOTE: Updated British Standards must be reordered as the amendments are not available separately.

BS 3951-2.1:1991+A5:2006 (ISO 1496-1:1990+A5:2006) Freight containers. Specification and testing of series 1 freight containers. General cargo containers for general purposes AMENDMENT 5 £62.00 members, £124.00 non-members

EPL/40X

BS EN 60384-22:2004

CORRIGENDUM 1 EPL/40X

BS EN 60384-22-1:2004 Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2. Assessment level EZ

TW/1

Also incorporates Amendments 1, 2, 3 & 4

BS 4607-1:1984+A2:2010 Non-metallic conduit fittings for electrical installations. Specification for fittings and components of insulating material AMENDMENT 2 £43.00 members, £86.00 non-members PEL/213

Also incorporates Amendment 1

Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed capacitors of ceramic dielectric, Class 1. Assessment level EZ

CORRIGENDUM 1

BS 4607-5:1982+A3:2010

EPL/40X

BS EN 61051-1:2008

Non-metallic conduit fittings for electrical installations. Specification for rigid conduits, fittings and boxes of insulating material

CORRIGENDUM 1

Varistors for use in electronic equipment. Generic specification

AMENDMENT 3 £35.00 members, £70.00 non-members

CORRIGENDUM 1

PEL/213

EPL/40X

Also incorporates Amendments 1 & 2

EPL/40X

BS EN 60384-9:2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed capacitors of ceramic dielectric, Class 2

BS 4A 113:1999

CORRIGENDUM 1

CORRIGENDUM 2

EPL/40X

ACE/12

BS EN 60384-9-1:2005

Specification for cadmium-plated, mushroomheaded, unified-thread, slotted drive, bolts

Also incorporates Corrigenda 1

BS EN 453:2000+A1:2009 Food processing machinery. Dough mixers. Safety and hygiene requirements AMENDMENT 1 £81.00 members, £162.00 non-members MCE/3/5

Fixed capacitors for use in electronic equipment. Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2. Assessment level EZ

BS 4A 114:1999

CORRIGENDUM 1

CORRIGENDUM 1

EPL/40X

ACE/12

Specification for corrosion-resisting steel, mushroom-headed, slotted-drive, bolts (strength a class 880/1080)

BS EN 869:2006+A1:2009 Safety of machinery. Safety requirements for pressure metal diecasting units AMENDMENT 1 £81.00 members, £162.00 non-members MCE/3/10

BS EN 60384-13:2006 Fixed capacitors for use in electronic equipment. Sectional specification. Fixed polypropylene film dielectric metal foil D.C. capacitors CORRIGENDUM 2 EPL/40X

Also incorporates Corrigenda 1

Please do not send confirmation of

BS EN 1057:2006+A1:2010 Copper and copper alloys. Seamless, round copper tubes for water and gas in sanitary and heating applications AMENDMENT 1 £71.00 members, £142.00 non-members NFE/34/3

orders placed by BS EN 60384-16:2005 Fixed capacitors for use in electronic equipment. Sectional specification: Fixed metallized polypropylene film dielectric D.C. capacitors

telephone as it can lead to duplication

BS EN 1495:1997+A2:2009 Lifting platforms. Mast climbing work platforms AMENDMENT 2 £93.00 members, £186.00 non-members

CORRIGENDUM 1

MHE/12

EPL/40X

Also incorporates Amendment 1

20

Prices may be subject to change.

Update Standards May 2010

BS EN 1501-1:1998+A2:2009

BS EN ISO 11111-5:2005+A1:2009

BS EN 13034:2005+A1:2009

Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Rear-end loaded refuse collection vehicles

Textile machinery. Safety requirements. Preparatory machinery to weaving and knitting

Protective clothing against liquid chemicals. Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)

AMENDMENT 2 £86.00 members, £172.00 non-members

AMENDMENT 1 £62.00 members, £124.00 non-members TCI/33

AMENDMENT 1 £43.00 members, £86.00 non-members

B/508/1

Also incorporates Amendment 1

BS EN ISO 11111-6:2005+A1:2009 Textile machinery. Safety requirements. Fabric manufacturing machinery

BS EN 1501-2:2005+A1:2009 Refuse collection vehicles and associated lifting devices. General requirements and safety requirements. Side loaded refuse collection vehicles AMENDMENT 1 £86.00 members, £172.00 non-members B/508/1

AMENDMENT 1 £62.00 members, £124.00 non-members TCI/33

BS EN ISO 11111-7:2005+A1:2009 Textile machinery. Safety requirements. Dyeing and finishing machinery

TCI/33

CH/121/5

BS EN 1870-5:2002+A1:2009 Safety of woodworking machines. Circular sawing machines. Circular saw benches/ up-cutting cross-cut sawing machines AMENDMENT 1 £86.00 members, £172.00 non-members MTE/23

BS EN 1870-7:2002+A1:2009 Safety of woodworking machines. Circular sawing machines. Single blade log sawing machines with integrated feed table and manual loading and/or unloading AMENDMENT 1 £86.00 members, £172.00 non-members MTE/23

BS EN 1999-1-1:2007+A1:2009 Eurocode 9. Design of aluminium structures. General structural rules AMENDMENT 1 £128.00 members, £256.00 non-members

AMENDMENT 1 £43.00 members, £86.00 non-members

BS EN 13544-2:2002+A1:2009 Respiratory therapy equipment. Tubing and connectors AMENDMENT 1 £43.00 members, £86.00 non-members

BS EN 13544-3:2001+A1:2009

Breathing tubes intended for use with anaesthetic apparatus and ventilators

Respiratory therapy equipment. Air entrainment devices

AMENDMENT 1 £62.00 members, £124.00 non-members

AMENDMENT 1 £43.00 members, £86.00 non-members

CH/121/5

CH/121/5

Also incorporates Corrigenda 1

BS EN 14279:2004+A1:2009 BS EN 12472:2005+A1:2009 Method for the simulation of wear and corrosion for the detection of nickel release from coated items AMENDMENT 1 £43.00 members, £86.00 non-members STI/53

BS EN 12864:2001+A3:2009 Low-pressure, non adjustable regulators having a maximum outlet pressure of less than or equal to 200 mbar, with a capacity of less than or equal to 4 kg/h, and their associated safety devices for butane, propane or their mixtures AMENDMENT 3 £106.00 members, £212.00 non-members GSE/24

Also incorporates Amendments 1 & 2

Laminated veneer lumber (LVL). Definitions, classification and specifications AMENDMENT 1 £62.00 members, £124.00 non-members B/541

BS EN 14605:2005+A1:2009 Protective clothing against liquid chemicals. Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) AMENDMENT 1 £43.00 members, £86.00 non-members PH/3/3

BS EN 14910:2007+A1:2009 Garden equipment. Walk-behind combustion engine powered trimmers. Safety AMENDMENT 1 £86.00 members, £172.00 non-members

BS EN 12965:2003+A2:2009 Textile machinery. Safety requirements. Nonwoven machinery

AMENDMENT 1 £81.00 members, £162.00 non-members

BS EN 12342:1998+A1:2009

B/525/9

BS EN ISO 11111-3:2005+A1:2009

Plastics and rubber machines. Winding machines for film or sheet. Safety requirements

CH/121/5

Anaesthetic reservoir bags AMENDMENT 1 £62.00 members, £124.00 non-members

BS EN 13418:2004+A1:2008

MCE/3/2

AMENDMENT 1 £81.00 members, £162.00 non-members

BS EN 1820:2005+A1:2009

PH/3/3

Tractors and machinery for agriculture and forestry. Power take-off (PTO) drive shafts and their guards. Safety AMENDMENT 2 £62.00 members, £124.00 non-members

AGE/20

BS EN 15056:2006+A1:2009 Cranes. Requirements for container handling spreaders

AGE/6

AMENDMENT 1 £62.00 members, £124.00 non-members

TCI/33

Also incorporates Amendment 1

MHE/3

BS EN ISO 11111-4:2005+A1:2009

BS EN 13001-1:2004+A1:2009

Textile machinery. Safety requirements. Yarn processing, cordage and rope manufacturing machinery AMENDMENT 1 £62.00 members, £124.00 non-members TCI/33

Update Standards May 2010

Cranes. General design. General principles and requirements AMENDMENT 1 £71.00 members, £142.00 non-members

BS EN 50065-1:2001+A1:2010 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. General requirements, frequency bands and electromagnetic disturbances

MHE/3

AMENDMENT 1 £62.00 members, £124.00 non-members

Also incorporates Corrigenda 1 & 2

PEL/205

Prices may be subject to change.

21

Updated British Standards continued... BS EN 60335-2-24:2003+A2:2007 Household and similar electrical appliances. Safety. Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers AMENDMENT 12 £86.00 members, £172.00 non-members CPL/61/3

Also incorporates Amendments 2 & 11 and Corrigenda 1

BS EN 60630:1998+A6:2009 Maximum lamp outlines for incandescent lamps AMENDMENT 6 £117.00 members, £234.00 non-members CPL/34/1

Also incorporates Amendments 1, 2, 3, 4 & 5

BS EN 60730-2-14:1997+A2:2008 Automatic electrical controls for household and similar use. Particular requirements for electric actuators AMENDMENT 2 £43.00 members, £86.00 non-members CPL/72

Also incorporates Amendments 1 & 11

BS EN 60809:1996+A4:2009 (IEC 809:1995)

BRITISH STANDARDS REVIEWED AND CONFIRMED

BS EN 1334:1996 Domestic furniture. Beds and mattresses. Methods of measurement and recommended tolerances FW/0/2

It is BSI policy for every standard to be reviewed by the technical committee responsible not more than five years after publication, to establish whether it is still current and, if it is not, to identify and set in hand appropriate action.

BS EN 1725:1998 Domestic furniture. Beds and mattresses. Safety requirements and test methods FW/0/2

Confirmation indicates the continuing currency of a standard. Where any standard in this list has been amended since publication, confirmation includes all amendments published to date. Reference to a particular amendment indicates that it is published concurrently with the confirmation.

BS EN 12727:2000 Furniture. Ranked seating. Test methods and requirements for strength and durability FW/0

BS EN 14884:2005 BS EN 597-1:1995 Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: smouldering cigarette

Air quality. Stationary source emissions. Determination of total mercury: automated measuring systems EH/2/1

FW/6

BS EN 597-2:1995

DD CEN/TS 15674:2007

Furniture. Assessment of the ignitability of mattresses and upholstered bed bases. Ignition source: match flame equivalent

Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods

AMENDMENT 4 £128.00 members, £256.00 non-members

FW/6

EH/2/1

CPL/34/1

BS EN 1022:2005

Also incorporates Amendments 1, 2 & 3

Domestic furniture. Seating. Determination of stability

Lamps for road vehicles. Dimensional, electrical and luminous requirements

BS EN 61010-031:2002+A1:2008 Safety requirements for electrical equipment for measurement, control and laboratory use. Safety requirements for hand-held probe assemblies for electrical measurement and test AMENDMENT 1 £86.00 members, £172.00 non-members EPL/66

BS EN 61347-1:2001+A1:2008 Lamp controlgear. General and safety requirements AMENDMENT 1 £86.00 members, £172.00 non-members

DD CEN/TS 15675:2007

FW/0

Air quality. Measurement of stationary source emissions. Application of EN ISO/IEC 17025:2005 to periodic measurements

BS EN 1023-1:1997

EH/2/1

Office furniture. Screens. Dimensions FW/0

BS ISO 3547-1:2006 BS EN 1023-2:2000

Plain bearings. Wrapped bushes. Dimensions

Office furniture. Screens. Mechanical safety requirements

MCE/12

FW/0

BS EN 1023-3:2000

BS ISO 3547-2:2006

Office furniture. Screens. Test methods

Plain bearings. Wrapped bushes. Test data for outside and inside diameters

FW/0

MCE/12

CPL/34/3

Also incorporates Corrigenda 1

BS EN 1129-1:1995 Furniture. Foldaway beds. Safety requirements and testing. Safety requirements

NA to BS EN 1999-1-1:2007+A1:2010 UK National Annex to Eurocode 9. Design of aluminium structures. General structural rules AMENDMENT 1 £35.00 members, £70.00 non-members B/525/9

Plain bearings. Wrapped bushes. Lubrication holes, grooves and indentations

BS EN 1129-2:1995

MCE/12

Furniture. Foldaway beds. Safety requirements and testing. Test methods FW/0/2

BS EN 1130-1:1997 Furniture. Cribs and cradles for domestic use. Safety requirements To order visit www.bsigroup.com/shop

22

BS ISO 3547-3:2006

FW/0/2

BS ISO 3547-4:2006 Plain bearings. Wrapped bushes. Materials MCE/12

CW/1/5

BS ISO 17321-1:2006 BS EN 1130-2:1996 Furniture. Cribs and cradles for domestic use. Test methods

Graphic technology and photography. Colour characterization of digital still cameras (DSCs). Stimuli, metrology, and test procedures

CW/1/5

CPW/42

Prices may be subject to change.

Update Standards May 2010

BRITISH STANDARDS PROPOSED FOR DECLARATION OF OBSOLESCENCE Declaration of obsolescence indicates that the standard is not recommended for use in new equipment, but needs to be retained for the servicing of existing equipment that is expected to have a long working life. A note of any objections to the proposals below should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 June, 2010.

BS 3455:1973 Glossary of terms used in nuclear science and technology NCE/2

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

BS 3664:1963 Specification for film badges for personnel radiation monitoring NCE/2

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

BS 3775:1964 Specification for counting trays (planchets) for radioactive assay NCE/2

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

BS 5288:1976

BS 3510:1968

Specification. Sealed radioactive sources

Specification for a basic symbol to denote the actual or potential presence of ionizing radiation

NCE/2

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

BRITISH STANDARDS PROPOSED FOR WITHDRAWAL A note of any objections to these withdrawals should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 June, 2010. Where any standard in this list has been amended since publication, a proposal to withdraw also includes all amendments published to date.

NCE/2

This standard has been withdrawn as it is superseded by ISO 361:1975 which was never adopted as a British Standard

BS 4248:2004 Supersulfated cement B/516/6

Superseded by BS EN 15743:2010

BS 4540-2:1982 Sampling of spices and condiments. Method for preparation of a ground sample for analysis AW/7

Superseded by BS EN ISO 2825:2010

BS 4899-1:1991 Guide to user’s requirements for technical manuals (based on the principles of BS 4884). Content DS/1

This standard has been withdrawn as it conflicts with BS EN 62079:2001

BS EN 61300-2-30:1997 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Solar radiation GEL/86/2

This standard has been proposed for withdrawal as the European Standard has been proposed for withdrawal by CENELEC

BRITISH STANDARDS WITHDRAWN If any standard in this list has been amended since publication, all amendments published to date are also withdrawn

BS 4899-2:1992 Guide to user’s requirements for technical manuals (based on the principles of BS 4884). Presentation DS/1

This standard has been withdrawn as it conflicts with BS EN 62079:2001

BS 5045-2:1989 Transportable gas containers. Specification for steel containers of 0.5 L up to 450 L water capacity with welded seams PVE/3/3

Superseded by BS EN 13322-1:2003+A1:2006

BS 5950-3.1:1990+A1:2010 Structural use of steelwork in building. Design in composite construction. Code of practice for design of simple and continuous composite beams

BS 3890:1965

BS 611-2:1990

General recommendations for the testing, calibration and processing of radiation monitoring films

Petri dishes. Specification for plastics Petri dishes for single use

NCE/2

Superseded by BS EN ISO 24998:2008

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

BS 1384-1:1985

BS 4247-1:1981

CPW/42

Surface materials for use in radioactive areas. Methods of measuring and evaluating the decontamination factor

Superseded by BS ISO 5-1:2009

NCE/2

BS 1384-2:2001

BS 6201-1:1982

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

Photographic density measurements. Geometric conditions for transmission density

Fixed capacitors for use in electronic equipment. Methods of test

CPW/42

EPL/40X

Superseded by BS ISO 5-2:2009

Superseded by BS EN 60384-1:2009

BS 3385:1973

BS 6911-14:1998

Specification for direct reading pocket type electroscope exposure meters

Testing earth-moving machinery. Crawler machines. Performance requirements and test procedures for braking systems

LBI/36

B/525/4

Superseded by BS EN 1994-1-1:2004

BS 6200-3.22.2:1985 Photographic density measurements. Guide for terms, symbols and notations

Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method ISE/102

Superseded by BS EN ISO 4945:2009

BS 4247-2:1982 Surface materials for use in radioactive areas. Guide to the selection of materials NCE/2

This standard has been proposed for obsolescence as the techniques are old but it is considered that there still is a small level of use

Update Standards May 2010

NCE/2

This standard has been withdrawn as it is no longer used by the industry

Prices may be subject to change.

B/513/1

Superseded by BS ISO 10265:2008

23

British Standards Withdrawn continued... BS 7723-4:1995 Methods for calibration of vertical cylindrical tanks for petroleum and liquid petroleum products. Internal electro-optical distanceranging method

BS EN 13702-2:2003 (BS 2000-514:2003)

PTI/12

Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of dynamic viscosity of modified bitumen. Coaxial cylinders method

Superseded by BS ISO 7507-4:2010

PTI/13

Superseded by the dual numbered standard BS EN 13302:2010, BS 2000-505:2010

BS 7780-3:1994 Rotary shaft lip type seals. Storage, handling and installation MCE/11

Superseded by BS ISO 6194-3:2009

BS EN 14896:2006 (BS 2000-546:2006) Bitumen and bituminous binders. Dynamic viscosity of bituminous emulsions, cut-back and fluxed bituminous binders. Rotating spindle viscometer method

BS 7839:1995

PTI/13

Solid hardmetal end-mills with parallel shanks. Dimensions

Superseded by the dual numbered standard BS EN 13302:2010, BS 2000-505:2010

MTE/18

Superseded by BS ISO 10911:2010

DD CEN/TS 14961:2005 Solid biofuels. Fuel specifications and classes

BS EN 550:1994

PTI/17

Sterilization of medical devices. Validation and routine control of ethylene oxide sterilization

Superseded by BS EN 14961-1:2010

CH/198

DD CEN ISO/TS 17234:2003

Superseded by BS EN ISO 11135-1:2007

Leather. Chemical tests. Determination of certain azo colourants in dyed leathers Superseded by BS EN ISO 17234-1:2010

Agricultural machinery. Combine harvesters and forage harvesters. Safety AGE/32

Superseded by BS EN ISO 4254-7:2009

Hand-held motor-operated electric tools. Safety. Particular requirements for drain cleaners CPL/116

Superseded by BS EN 60745-2-21:2009

BS EN 61557-8:1997 Electrical safety in low voltage distribution systems up to 1000 V A.C. and 1500 V D.C. Equipment for testing, measuring or monitoring of protective measures. Insulation monitoring devices for IT systems PEL/85

Superseded by BS EN 61557-8:2007

BS QC 300000:1983 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Generic specification EPL/40X

Superseded by BS EN 60384-1:2009

BS QC 300100:1991

TCI/69

BS EN 632:1996

BS EN 60745-2-21:2007

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed polyethylene-terephthalate film dielectric metal foil D.C.. capacitors EPL/40X

Superseded by BS EN 60384-1:2009

BS EN 23908:1993 Hardmetals. Determination of insoluble (free) carbon content. Gravimetric method ISE/65

BS QC 300301:1993

Graphical symbols for use in the labelling of medical devices

BS EN 25821:1992

CH/210/3

Resistance spot welding electrode caps

Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Fixed capacitors for use in electronic equipment. Aluminium electrolytic capacitors with non-solid electrolyte. Assessment level E

Superseded by BS EN 980:2008

WEE/29

EPL/40X

Superseded by BS EN ISO 5821:2009

Superseded by BS EN 60384-4-1:2007

BS EN 980:2003

BS EN 1713:1998 Non-destructive testing of welds. Ultrasonic testing. Characterization of indications in welds WEE/46

Superseded by BS EN ISO 23279:2010

Superseded by BS EN ISO 3908:2009

BS CECC 30801:1993 Specification for harmonized system of quality assessment for electronic components. Blank detail specification. Tantalum surface mounting capacitors EPL/40X

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polyethylene terephthalate film dielectric D.C. capacitors

Superseded by BS EN 60384-3-1:2006

EPL/40X

BS EN ISO 9445:2006 Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths. Tolerances on dimensions and form ISE/105

Superseded by BS EN ISO 9445-1:2010 and BS EN ISO 9445-2:2010

BS EN 12062:1998 Non-destructive examination of welds. General rules for metallic materials WEE/46

BS QC 300400:1983

Superseded by BS EN 60384-2:2005

BS EN 50015:1998 Electrical apparatus for potentially explosive atmospheres. Oil immersion “o” GEL/31/17

Superseded by BS EN 60079-6:2007

DD CLC/TS 50131-4:2006 Alarm systems. Intrusion and hold-up systems. Warning devices GW/1/1

BS QC 300401:1984 Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polyethylene terephthalate film dielectric D.C. capacitors. Assessment level E EPL/40X

Superseded by BS EN 60384-2-1:2005

Superseded by BS EN 50131-4:2009

Superseded by BS EN ISO 17635:2010

BS EN 60318-2:1998

BS QC 300600:1991

Guidance on the classification and design of plastics piping systems used for renovation

Electroacoustics. Simulators of human head and ear. An interim acoustic coupler for the calibration of audiometric earphones in the extended high-frequency range

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 1

PRI/88/3

EPL/29

EPL/40X

Superseded by BS EN ISO 11295:2010

Superseded by BS EN 60318-1:2009

Superseded by BS EN 60384-8:2005

BS EN 13689:2002

24

Prices may be subject to change.

Update Standards May 2010

BS QC 300601:1993

BS QC 301901:1992

BS ISO 11929-6:2005

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 1. Assessment level E

Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed multilayer ceramic chip capacitors. Assessment level E

Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and applications to measurements by use of transient mode

EPL/40X

EPL/40X

Superseded by BS ISO 11929:2010

Superseded by BS EN 60384-8-1:2005

Superseded by BS EN 60384-21:2004, BS EN 6038421-1:2004, BS EN 60384-22:2004 and BS EN 60384-22-1:2004

BS QC 300700:1992 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed capacitors of ceramic dielectric, class 2

BS QC 420000:1992

EPL/40X

Harmonized system of quality assessment for electronic components. Varistors for use in electronic equipment: generic specification

Superseded by BS EN 60384-9:2005

EPL/40X

Superseded by BS EN 61051-1:2008

BS QC 300701:1993 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed capacitors of ceramic dielectric, class 2. Assessment level E EPL/40X

BS ISO 6580:2005 (BS 6339:2005) General-purpose industrial fans. Circular flanges. Dimensions MCE/17

Superseded by BS EN 60384-9-1:2005

Superseded by BS EN ISO 13351:2009

BS QC 300801:1993

BS ISO 11929-1:2000

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification. Fixed tantalum chip capacitors. Assessment level E EPL/40X

Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements without the influence of sample treatment NCE/2

Superseded by BS EN 60384-3-1:2006

Superseded by BS ISO 11929:2010

BS QC 301200:1983

BS ISO 11929-2:2000

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification: fixed metallized polypropylene film dielectric d.c. capacitors EPL/40X

Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements with the influence of sample treatment NCE/2

NCE/2

BS ISO 11929-7:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and general applications NCE/2

Superseded by BS ISO 11929:2010

BS ISO 11929-8:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to unfolding of spectrometric measurements without the influence of sample treatment NCE/2

Superseded by BS ISO 11929:2010

BS ISO/IEC 13335-1:2004 Information technology. Security techniques. Management of information and communications technology security. Concepts and models for information and communications technology security management IST/33

This standard has been withdrawn. A call for contributions was issued by the ISO/IEC JTC 1/SC 27 Secretariat to National Bodies to the periodic prereview of ISO/IEC 13335-1:2004. It was unanimously agreed that the standard should be withdrawn as the material contained in ISO/IEC 27000:2009 and ISO/IEC 27005:2008 have made ISO/IEC 133351:2004 redundant

BS ISO/TR 14696:1999 Reaction to fire tests. Determination of fire parameters of materials, products and assemblies using an intermediate scale heat release calorimeter (ICAL)

Superseded by BS EN 60384-16:2005

Superseded by BS ISO 11929:2010

BS QC 301201:1984

BS ISO 11929-3:2000

FSH/21

Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed metallized polypropylene film dielectric d.c. capacitors. Assessment level E

Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to counting measurements by high resolution gamma spectrometry, without the influence of sample treatment

This standard has been withdrawn as it is superseded by ISO 14696:2009 which will not be implemented as a British Standard

EPL/40X

NCE/2

Superseded by BS EN 60384-16-1:2005

Superseded by BS ISO 11929:2010

Electrical apparatus for explosive gas atmospheres. Repair and overhaul for apparatus used in explosive atmospheres (other than mines or explosives)

BS QC 301800:1991

BS ISO 11929-4:2001

GEL/31/11

Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed polypropylene film dielectric metal foil d.c. capacitors

Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and application to measurements by use of linear-scale analogue ratemeters, without the influence of sample treatment

Superseded by BS EN 60079-19:2007

EPL/40X

Superseded by BS EN 60384-13:2006

NCE/2

Superseded by BS ISO 11929:2010

BS QC 301900:1992 Harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Sectional specification for fixed multilayer ceramic chip capacitors EPL/40X

Superseded by BS EN 60384-21:2004, BS EN 6038421-1:2004, BS EN 60384-22:2004 and BS EN 60384-22-1:2004

Update Standards May 2010

BS IEC 60079-19:1993

BS IEC 61010-3-1:1997 Safety requirements for electrical equipment for measurement, control, and laboratory use. Conformity verification report for IEC 61010-1 EPL/66

This standard has been withdrawn as the International Standard has been withdrawn by IEC

BS ISO 11929-5:2005 Determination of the detection limit and decision threshold for ionizing radiation measurements. Fundamentals and applications to counting measurements on filters during accumulation of radioactive material

DD IEC/TS 61850-80-1:2009

NCE/2

PEL/57

Superseded by BS ISO 11929:2010

Superseded by DD CLC/TS 61850-80-1:2010

Prices may be subject to change.

Communication networks and systems for power utility automation. Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104

25

British Standards Withdrawn continued... BS AU 50-1.1.4b:1996

BS EN 13900-5:2005

BS 8020 (Revision)

Tyres and wheels. Tyres. Car tyres. Method of test for verifying tyre capabilities AUE/4

Pigments and extenders. Methods of dispersion and assessment of dispersibility in plastics. Determination by filter pressure value test

Superseded by BS ISO 10191:2010

STI/1

Tools for live working. Insulating hand tools for work on or near conductor rail systems operating at voltages up to 1000 V A.C. or 1500 V D.C.

BS AU 50-1.4.3a:1992

BS EN 14787:2005

PEL/78

Tyres and wheels. Tyres. Agricultural tractor and machine tyres. Specification for classification codes and nomenclature for ply rating marked series tyres

Fertilizers and liming materials. Determination of water content. Guidelines and recommendations

BS 8204-6:2008/Amendment 1

will supersede BS 8020:2002

CII/37

AUE/4

B/507/6

Superseded by BS ISO 4251-4:2010

BS EN 14888:2005

BS AU 175-2b:1983

Fertilizers and liming materials. Determination of cadmium content

Vehicle identification numbers (VIN). Specification for world manufacturer identifier (WMI) codes

CII/37

AUE/15

Superseded by BS ISO 3780:2009

BRITISH STANDARDS UNDER REVIEW

Screeds, bases and in situ floorings. Synthetic resin floorings. Code of practice

NEW WORK STARTED The reference number of the committee responsible for each item of new work started is given after each entry.

The following British Standards implement International and/or European Standards which are currently under review to see if they should be confirmed, revised or withdrawn.

Where a work item has the temporary designation “BS EN XXXX”, it has not yet been allocated a standard number by the European standards body.

Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL or via email to [email protected] by 30 June, 2010, in order to be considered by the relevant UK Committee.

BS 644:2009/Amendment 1

BS 8542-1 Building modelling shapes and symbols library. Recommended 2D symbols and shape representations of building and engineering elements for use in building information modelling software B/555

BS 8544 Guide on life cycle costing during the in-use phase B/500/3

BS 8877 Online recruitment services. Code of practice SVS/9

BS 8909 Timber windows. Fully finished factoryassembled windows of various types. Specification B/538/1

BS XXXX Water consumption in buildings. Code of practice B/504

Specification for a sustainability management system for film SDS/1/7

BS EN 3-8 (Revision) Portable fire extinguishers. Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar will supersede BS EN 3-8:2006

BS EN 1236:1995 Fertilizers. Determination of bulk density (loose)

BS 2869 (Revision)

FSH/2

CII/37

Fuel oils for agricultural, domestic and industrial engines and boilers. Specification

BS EN 30-1-1:2008/Amendment 2

BS EN 1237:1995

will supersede BS 2869:2006

Fertilizers. Determination of bulk density (tapped)

PTI/2

CII/37

BS 6164 (Revision)

BS EN ISO 7837:2001 Fertilizers. Determination of bulk density (loose) of fine-grained fertilizers

GSE/35

Code of practice for safety in tunnelling in the construction industry will supersede BS 6164:2001 B/513

Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test STI/1

BS EN WI 00207205 Non-domestic storage furniture. Test methods for the determination of strength, durability and stability FW/0/4

CII/37

BS EN 12878:2005

Domestic cooking appliances burning gas. Safety. General

BS 6259 (Revision) Code of practice for the design, planning, installation, testing and maintenance of sound systems

BS EN WI JW001001 Energy audits. General SEM/1/1

will supersede BS 6259:1997 EPL/100

BS EN 593:2009/Amendment 1 Industrial valves. Metallic butterfly valves

BS EN 13366:2001 Fertilizers. Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients

BS 6896 (Revision)

PSE/18/3

Specification for installation of gas-fired overhead radiant heaters for industrial and commercial heating (2nd and 3rd family gases)

BS EN 716-1:2008/Amendment 1

will supersede BS 6896:2005

Furniture. Children’s cots and folding cots for domestic use. Safety requirements

GSE/30

CW/1/5

Fertilizers. Determination of chelating agents in fertilizers by ion chromatography. EDTA, HEDTA and DTPA

BS 7371-6:1998/Amendment 1

BS EN 716-2:2008/Amendment 1

Coatings on metal fasteners. Specification for hot dipped galvanized coatings

Furniture. Children’s cots and folding cots for domestic use. Test methods

CII/37

FME/9/1

CW/1/5

CII/37

BS EN 13368-1:2001

26

Prices may be subject to change.

Update Standards May 2010

BS EN 836:1997/Amendment 4

BS EN 1793-6

BS EN 13175 (Revision)

Garden equipment. Powered lawnmowers. Safety

Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics. In situ values of airborne sound insulation under direct sound field conditions

LPG equipment and accessories. Specification and testing for liquefied petroleum gas (LPG) tank valves and fittings

AGE/20

BS EN 958:2006/Amendment 1 Mountaineering equipment. Energy absorbing systems for use in klettersteig (via ferrata) climbing. Safety requirements and test methods SW/136/5

BS EN 1097-1 (Revision) Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear (micro-Deval) will supersede BS EN 1097-1:1996 B/502/6

BS EN 1097-6 (Revision) Tests for mechanical and physical properties of aggregates. Determination of particle density and water absorption

B/509/6

BS EN ISO 8980-3 (Revision) Ophthalmic optics. Uncut finished spectacle lenses. Transmittance specifications and test methods CH/172/3

BS EN 1367-5 (Revision)

will supersede BS EN 13369:2004+A1:2006 B/524

BS EN 14127 (Revision)

will supersede BS EN 14127:2004

Pipework. Corrugated metal hoses and hose assemblies

WEE/46

will supersede BS EN ISO 10380:2003

BS EN 14276-1:2006/Amendment 1

PSE/12

Pressure equipment for refrigerating systems and heat pumps. Vessels. General requirements Smoke and heat control systems. Specification for powered smoke and heat exhaust ventilators

B/546/1

Common rules for precast concrete products

BS EN ISO 10380 (Revision)

BS EN 12101-3 (Revision)

will supersede BS EN 1110:2000

BS EN 13369 (Revision)

Non-destructive testing. Ultrasonic thickness measurement

B/502/6

Flexible sheets for waterproofing. Bitumen sheets for roof waterproofing. Determination of flow resistance at elevated temperature

PVE/19

will supersede BS EN ISO 8980-3:2004

will supersede BS EN 1097-6:2000

BS EN 1110 (Revision)

will supersede BS EN 13175:2003

RHE/18

BS EN 14276-2:2007/Amendment 1

will supersede BS EN 12101-3:2002

Pressure equipment for refrigerating systems and heat pumps. Piping. General requirements

FSH/25

RHE/18

BS EN 12201-4 (Revision)

BS EN 14388 (Revision)

Plastic piping systems for water supply. Polyethylene (PE). Valves

Road traffic noise reducing devices. Specifications

will supersede BS EN 12201-4:2001

will supersede BS EN 14388:2005

PRI/88/2

B/509/6

will supersede BS EN 1367-5:2002

BS EN 12680-3 (Revision)

BS EN 14961-2

B/502/6

Founding. Ultrasonic examination. Spheroidal graphite cast iron castings

Solid biofuels. Fuel specifications and classes. Wood pellets for non-industrial use

BS EN 1370 (Revision)

will supersede BS EN 12680-3:2003

PTI/17

Founding. Surface roughness inspection by visual tactile comparators

ISE/35

Tests for thermal and weathering properties of aggregates. Determination of resistance to thermal shock

will supersede BS EN 1370:1997 ISE/35

BS EN 1371-1 (Revision) Founding. Liquid penetrant inspection. Sand, gravity die and low pressure die castings will supersede BS EN 1371-1:1997

BS EN 14961-3 BS EN 12758 (Revision) Glass in building. Glazing and airborne sound insulation. Product descriptions and determination of properties

Solid biofuels. Fuel specifications and classes. Wood briquettes for non- industrial use PTI/17

will supersede BS EN 12758:2002

BS EN 14961-4

B/520/4

Solid biofuels. Fuel specifications and classes. Wood chips for non-industrial use PTI/17

ISE/35

BS EN 12859 (Revision) BS EN 1744-7 Tests for chemical properties of aggregates. Determination of loss on ignition (LoI) of Municipal Incinerator Bottom Ash (MIBA)

Gypsum blocks. Definitions, requirements and test methods

BS EN 14961-5

will supersede BS EN 12859:2008

Solid biofuels. Fuel specifications and classes. Firewood for non-industrial use

B/544/1

B/502/6

BS EN 1793-1 (Revision) Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of sound absorption will supersede BS EN 1793-1:1998 B/509/6

PTI/17

BS EN 13126-1 (Revision)

BS EN 15011

Building hardware. Requirements and test methods for windows and doors height windows. Requirements common to all types of hardware

Cranes. Bridge & gantry cranes

will supersede BS EN 13126-1:2006 B/538

MHE/3/3

BS EN 15022-4 (Revision) Copper and copper alloys. Determination of tin content. Medium tin content. Flame atomic absorption spectrometry method (FAAS)

BS EN 1793-2 (Revision)

BS EN 13126-3 (Revision)

will supersede DD CEN/TS 15022-4:2006

Road traffic noise reducing devices. Test method for determining the acoustic performance. Intrinsic characteristics of airborne sound insulation

Building hardware, fittings for windows and door height windows. Requirements and test methods. Manoeuvring fittings for espagnolette bolts/sliding button

NFE/34

will supersede BS EN 1793-2:1998

will supersede DD CEN/TS 13126-3:2004

Extended application of results from fire resistance tests. Load bearing masonry walls

B/509/6

B/538

FSH/22/2

Update Standards May 2010

Prices may be subject to change.

BS EN 15080-12

27

New Work Started continued... BS EN 15085-1:2007/Amendment 1

PD CEN/TR 16110

BS EN 60874-1-1 (Revision)

Railway applications. Welding of railway vehicles and components. General

Characterization of waste. Guidance on the use of ecotoxicity tests applied to waste

Connectors for optical fibres and cables. Blank detail specification

RAE/1/-/2

B/508/3

will supersede BS EN 60874-1-1:2007 GEL/86/2

BS EN 15151-1

DD CEN/TS 16115

Mountaineering equipment. Braking devices. Braking devices with assisted locking, safety requirements and test methods

Ambient air quality. Measurement of bioaerosols. Determination of moulds using filter sampling systems and cultivation based analyses

SW/136/5

EH/2/1

BS EN 61175 (Revision) Industrial systems, installation and equipment and industrial products. Designation of signals will supersede BS EN 61175:2005 GEL/3

BS EN 15151-2 Mountaineering equipment. Braking devices. Manual braking devices, safety requirements and test methods SW/136/5

BS EN 15202 (Revision) LPG equipment and accessories. Essential operational dimensions for LPG cylinder valve outlet and associated equipment connections will supersede BS EN 15202:2006 PVE/19

BS EN 16117-1

BS EN 61274-1 (Revision)

Copper and copper alloys. Determination of copper content. Electrolytic determination of copper in materials with copper content less than 99, 85%

Adaptors for fibre optic connectors. Generic specification

NFE/34

BS EN 16119 LPG equipment and accessories. Sealing caps and plugs for cylinder and tank valves. Specification and testing PVE/19

BS EN 15234-1 Solid biofuels. Fuel quality assurance. General requirements

PD CEN ISO/TR 20573 (Revision)

will supersede DD CEN/TS 15234:2006

Footwear. Performance requirements for components for footwear. Heels and top pieces

PTI/17

will supersede PD ISO/TR 20573:2006

will supersede BS EN 61274-1:2008 GEL/86/2

BS EN 61274-1-1 (Revision) Adaptors for fibre optic connectors. Blank detail specification will supersede BS EN 61274-1-1:2006 GEL/86/2

BS EN 61300-2-52 Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Bending test for cords GEL/86/2

TCI/69

BS EN 15303-1 Design and application of plasterboard systems on frames. General principles of design B/544/3

BS EN 15415-1 Solid recovered fuels. Determination of particle size distribution. Screen method for small dimension particles will supersede DD CEN/TS 15415:2006 PTI/17

BS EN 61314-1 (Revision) BS EN 50085-2-1:2006/Amendment 1 Cable trunking systems and cable ducting systems for electrical installations. Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings PEL/213

Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Generic specification will supersede BS EN 61314-1:2009 GEL/86/2

BS EN 61314-1-1 (Revision) BS EN 50495

Fibre optic fan-outs. Blank detail specification

Safety devices required for the safe functioning of equipment with respect to explosion risks

will supersede BS EN 61314-1-1:2006 GEL/86/2

GEL/31

BS EN 15502-1 Gas-fired heating boilers. General requirements and tests

BS EN 60335-2-40 (Revision)

GSE/29

Household and similar electrical appliances. Safety. Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

BS EN 15502-2-1

will supersede BS EN 60335-2-40:2003+A2:2009

Gas-fired heating boilers. Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1000 kW

CPL/61/4

GSE/29

Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors

DD CEN/TS 15916-1 Copper and copper alloys. Determination of tellurium content. Low tellurium content. Flame atomic absorption spectrometric method (FAAS) NFE/34

BS EN 16105 Paints and varnishes. Leaching of substances from coatings. Laboratory immersion method STI/28

BS EN 16109 Fertilizers. Determination of micro-nutrient ions complexed in fertilizers. Identification of lignosulfonates CII/37

28

BS EN 61439-4 Low-voltage switchgear and controlgear assemblies. Particular requirements for assemblies for construction sites (A CS) will supersede BS EN 60439-4:2004 PEL/17/3

BS EN 61753-071-2 BS EN 60603-7-1 (Revision)

will supersede BS EN 60603-7-1:2009

Fibre optic interconnecting devices and passive components performance standard. Nonconnectorised single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C. Controlled environments GEL/86/2

EPL/48

BS EN 60734 (Revision) Household electrical appliances. Performance. Hard water for testing will supersede BS EN 60734:2003 CPL/59/1

BS EN 61753-088-2 Fibre optic interconnecting devices and passive components performance standard. Nonconnectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C. Controlled environments GEL/86/2

BS EN 60874-1 (Revision) Connectors for optical fibres and cables. Generic specification

BS EN 62005-9-1

will supersede BS EN 60874-1:2007

Fibre optic interconnecting devices and passive components. Reliability. Qualification of passive optical components

GEL/86/2

GEL/86/2

Prices may be subject to change.

Update Standards May 2010

BS EN 62271-101:2006/Amendment 2

BS ISO 7700-2

BS ISO 15639

High-voltage switchgear and controlgear. Synthetic testing

Methods for analysis of oilseeds. Check of the calibration of moisture meters

Standardisation of the injection site of different animal species

PEL/17/1

will supersede BS 4289-8:1988

AGE/6/1

AW/307

BS EN 62638 Recurrent test and test after repair and modification of electrical equipment PEL/85

PD ISO/TR 16314 BS ISO 8373 (Revision) Manipulating industrial robots. Vocabulary will supersede BS EN ISO 8373:1996

BS EN 62642-8

AMT/4

Alarm systems. Intrusion and hold-up systems. Security fog device/systems

BS ISO 8784-1 (Revision)

GW/1/1

BS EN 62674-1 High frequency inductive components. Fixed surface mount inductors for use in electronic and telecommunication equipment EPL/51

BS EN 67287-2 Maritime navigation and radiocommunication equipment and systems Class B shipborne equipment of the automatic identification system (AIS). Self-organising time division multiple access (SOTDMA) EPL/80

Rubber. Measurement of the aromaticity of oil in reclaimed rubbers PRI/23

BS ISO 16331-1

Pulp, paper and board. Microbiological examination. Total count of bacteria, yeast and mould based on disintegration

Optics and optical instruments. Laboratory procedures for testing surveying and construction instruments. Performance of handheld laser distance meters CPW/172/6

will supersede BS ISO 8784-1:2005 PAI/11

BS ISO 17123-5

BS ISO 13372 (Revision)

Optics and optical instruments. Field procedures for testing geodetic and surveying instruments. Electronic tacheometers

Condition monitoring and diagnostics of machines. Vocabulary will supersede BS ISO 13372:2004 GME/21/7

BS ISO 13517

CPW/172/6

BS ISO 17378-1 Water quality. Determination of arsenic. Method using hydride generation atomic fluorescence spectrometry (HG-AFS)

Metallic powders. Determination of flowrate by means of a calibrated funnel (Gustavsson flowmeter)

EH/3/2

Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2

ISE/65

EPL/40X

BS ISO 13926-3

Water quality. Determination of arsenic. Method using hydride generation atomic absorption spectrometry (HG-AAS)

BS EN 140401-802:2007/Amendment 1

BS EN 140401-803:2007/Amendment 1 Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05; 0,1; 0,25; 0,5; 1; 2 EPL/40X

BS ISO 1652:2004/Amendment 1 Rubber latex. Determination of apparent viscosity by the Brookfield test method

Pen systems. Seals for pen-injectors for medical use CH/212

BS ISO 14229-1 Road vehicles. Unified diagnostic services (UDS). Specification and requirements will supersede BS ISO 14229:2006 AUE/16

PRI/50

BS ISO 14229-2 BS ISO 3316

BS ISO 17378-2

EH/3/2

BS ISO 17379-1 Water quality. Determination of selenium. Method using hydride generation atomic fluorescence spectrometry (HG-AFS) EH/3/2

BS ISO 17379-2 Water quality. Determination of selenium. Method using hydride generation atomic absorption spectrometry (HG-AAS)

Road vehicles. Unified diagnostic services (UDS). Session layer services

EH/3/2

AUE/16

BS ISO 18754

MTE/15

BS ISO 14641-1

BS ISO 4548-7

Electronic archiving. Specifications concerning the design and the operation of an information system for electronic information preservation

Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of density and apparent porosity

Assembly tools for screws and nuts. Attachments for hand-operated square drive socket wrenches. Dimensions and tests

Full-flow lubricating oil filters for internal combustion engines. Method of test for vibration fatigue will supersede BS 7403-7:1991 MCE/21/5

BS ISO 5270 (Revision) Pulps. Laboratory sheets. Determination of physical properties

RPI/13

IDT/1/3

BS ISO 19973-1 (Revision)

PD ISO/IEC TR 14763-2-1

Pneumatic fluid power. Assessment of component reliability by testing. General procedures

Information technology. Generic cabling. Implementation and operation of customer premises cabling. Identifiers within administration systems

will supersede BS ISO 19973-1:2007 MCE/18

TCT/7

BS ISO 19973-2 (Revision)

PAI/11

BS ISO 14903

BS ISO 5294

Refrigerating systems and heat pumps. Qualification of tightness of components and joints

Pneumatic fluid power. Assessment of component reliability by testing. Directional control valves

will supersede BS EN ISO 5270:2000

Synchronous belt drives. Pulleys MCE/10

will supersede BS ISO 19973-2:2007 MCE/18

RHE/18

BS ISO 19973-3 (Revision) BS ISO 7176-25

BS ISO 15081 (Revision)

Wheelchairs. Batteries and chargers for powered wheelchairs. Requirements and test methods

Agricultural irrigation equipment. Graphical symbols for pressurized irrigation systems

Pneumatic fluid power. Assessment of component reliability by testing. Cylinders with piston rod

will supersede BS ISO 15081:2005

will supersede BS ISO 19973-3:2007

CH/173/1

AGE/30

MCE/18

Update Standards May 2010

Prices may be subject to change.

29

New Work Started continued... BS ISO 20022-1 (Revision)

BS ISO 28005-1

10/30210204 DC

Financial services. UNIversal Financial industry message scheme. Overall methodology and format specifications for inputs to and outputs from the ISO 20022 repository

Security management systems for the supply chain. Electronic port clearance (EPC). Message structures

BS 8543 Financial services compliance. Framework

will supersede BS ISO 20022-1:2004

10/30218583 DC

IST/12

BS ISO 30005

BS ISO 20022-2 (Revision)

Ship recycling management systems. Information control for hazardous materials in the manufacturing chain of ship building and ship operations

Financial services. UNIversal Financial Industry message scheme. Roles and responsibilities of the registration bodies will supersede BS ISO 20022-2:2007 IST/12

SME/32

BS ISO 80003-3

SS/7

Financial services. UNIversal Financial Industry message scheme. Modelling

PD 6695-3-1

BS ISO 20022-4 Financial services. UNIversal Financial Industry message scheme. XML Schema Generation IST/12

BS ISO 20022-5

Background Paper to the UK National Annex to BS EN 1993-3-1 B/525

PAS 83 (Revision) Guidance on codes of practice, standardised methods and regulations for cell-based therapeutics will supersede PAS 83:2006

Financial services. UNIversal Financial Industry message scheme. Reverse Engineering IST/12

BS ISO 20022-7 Financial services. UNIversal Financial Industry message scheme. Registration IST/12

BS ISO 20022-8 Financial services. UNIversal Financial Industry message scheme. ASN.1 Generation IST/12

BS ISO 21809-3:2008/Amendment 1 Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. Field joint coatings PSE/17/2

BS ISO 22300 Societal security. Vocabulary SSM/1

BS ISO 23914-1 Water quality. Determination of antimony. Method using hydride generation atomic fluorescence spectrometry (HG-AFS) EH/3/2

BS ISO 23914-2 Water quality. Determination of antimony. Method using hydride generation atomic absorption spectrometry (HG-AAS) EH/3/2

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – NATIONAL BRITISH STANDARDS You may now comment on any National British Standard online. BSI British Standards has launched a Draft Review system which allows access to the drafts of all National British Standards. To enhance access of Drafts for Public Comment for the wider community, make comments more visible and move into collaborative working practices, you will now be able to comment on any National British Standard by visiting http://www.bsigroup.com/drafts. All you need to do is register. This service is free of charge. Please note that the only standards available on this service are pure British Standards (National Standards e.g: BS XXXX). European and international documents are not included at this time.

PTI/2

10/30218774 DC BS 8878 Web accessibility. Code of practice IST/45

DRAFT BRITISH STANDARDS FOR PUBLIC COMMENT – ADOPTIONS All Draft British Standards are available from BSI Customer Services (see ’How to order’ on page 2) Most drafts are charged at £10.00 to members and £20.00 to non-members. Larger draft documents are charged at a higher price according to the number of pages and are priced individually below. Comments are welcome and should be sent to Debbie Stead, Head of Committee Service Centre – Operations, BSI Head Office, 389 Chiswick High Road, London W4 4AL by 30 June, 2010 unless otherwise stated, to be considered by the relevant BSI committee. Draft standards may be modified before adoption and issue as British Standards. 10/30086524 DC BS ISO 10844 Acoustics. Specification of test tracks for measuring noise emitted by road vehicles and their tyres EH/1/2

Comments for the above document are required by 4 June, 2010

10/30089025 DC BS ISO/IEC 14492 AMD3 Information technology. Lossy/lossless coding of bi-level images IST/37

Deadlines for receipt of comments on each of the individual drafts can be found at http://www.bsigroup.com/drafts. The deadline for the following drafts is 30 June, 2010 unless otherwise stated. Should you wish to receive these drafts in hard copy format, they are available for a fee from BSI Customer Services (see ’How to order’ on page 2).

BS ISO/IEC 24754-2 Information technology. Minimum requirements for specifying document rendering systems. Formatting specifications for document rendering systems

10/30173459 DC

IST/41

CPI/30/5

30

BS 2869 Fuel oils for agricultural, domestic and industrial engines and boilers. Specification

Physiological quantities and their units. Chemistry

BS ISO 20022-3

IST/12

SVS/6/2

SME/32

BS 8452 Use of clamp-on (externally mounted) ultrasonic flow-metering techniques for fluid applications. Guide

Prices may be subject to change.

10/30116426 DC BS EN 50136-1-7 Alarm systems. Alarm transmission systems and equipment. Part 1-7. Requirements for common protocol for alarm transmission using packet switched network GW/1/5

Comments for the above document are required by 30 August, 2010

10/30145959 DC BS ISO/IEC 19795-5 Information Technology. Biometric performance testing and reporting. Part 5. Grading scheme for access control scenario evaluation IST/44

Comments for the above document are required by 31 May, 2010

Update Standards May 2010

10/30157037 DC

10/30195043 DC

10/30200372 DC

BS ISO/IEC 24753 Information technology. Radio frequency identification (RFID) for item management. Application protocol. Encoding and processing rules for sensors and batteries

BS EN ISO 22825 Non-destructive testing of welds. Ultrasonic testing. Testing of welds in austenitic steels and nickel-based alloys

BS ISO 17359 Condition monitoring and diagnostics of machines. General guidelines

WEE/46

Comments for the above document are required by 19 July, 2010

IST/34

10/30169922 DC BS EN ISO 10685-1 Ophthalmic optics. Spectacle frames and sunglasses electronic catalogue and identification. Part 1. Product identification and electronic catalogue product hierarchy CH/172/3

10/30171677 DC BS ISO 11485-1 Glass in building. Curved glass. Part 1. Terminology and definitions

GME/21/7

10/30196346 DC BS ISO 28005-2 Security management systems for the supply chain. Electronic port clearance (EPC). Part 2. Core data elements SME/32

10/30201340 DC BS ISO 24294 Round and sawn timber. Vocabulary B/543

10/30196691 DC 10/30202469 DC

BS ISO 10988 Equipment for crop protection. Knapsack motorized sprayers. Test methods and performance limits

BS ISO 12192 Paper and board. Determination of compressive strength. Ring crush method

AGE/15

PAI/11

B/520/1

Comments for the above document are required by 28 July, 2010

10/30196884 DC

10/30171680 DC

TCI/24

BS EN ISO 5403-1 Leather. Determination of water resistance of flexible leather. Part 1. Repeated linear compression (penetrometer)

10/30196961 DC

TCI/69

BS ISO 11485-2 Glass in building. Curved glass. Part 2. Quality requirements B/520/1

BS EN ISO 9092 Textiles. Nonwoven. Definition

Comments for the above document are required by 28 July, 2010

BS ISO 14470 Food irradiation. Requirements for the development, validation and routine control of the ionizing radiation process used for the treatment of food

10/30174936 DC

AW/90

BS ISO 11352 Water quality. Determination of measurement uncertainty based on validation data

Comments for the above document are required by 25 July, 2010

EH/3/2

10/30196989 DC

10/30175543 DC

BS ISO 12933 Agricultural tractors. Requirements for braking

BS ISO/IEC 19784-4 Biometric application programming interface. Part 4. Biometric sensor function provider interface

AGE/6

Comments for the above document are required by 31 July, 2010

IST/44

Comments for the above document are required by 31 May, 2010

10/30187736 DC BS EN 1175-1 AMD1 Safety of industrial trucks. Electrical requirements. Part 1. General requirements for battery powered trucks

10/30198657 DC

10/30203575 DC

10/30203578 DC BS EN 61577-3 Radiation protection instrumentation. Radon and radon decay product measuring instruments. Part 3. Specific requirements on radon decay product measuring instruments NCE/2

10/30204498 DC BS ISO/IEC 23000-5 Information technology. Multimedia application format (MPEG-A). Part 5. Media streaming application format £18.00 members, £36.00 non-members IST/37

BS EN 60695-7-1 Fire hazard testing. Part 7-1. Toxicity of fire effluent. General guidance

10/30205468 DC

GEL/89

10/30198921 DC

BS EN 60297-3-107 Mechanical structures for electronic equipment. Part 107. Dimensions of subracks and plug-in units, micro format

MHE/7

BS ISO 11891 Hot formed helical compression springs. Technical specifications

10/30187739 DC

FME/9/3

Comments for the above document are required by 4 June, 2010

10/30199110 DC

10/30205782 DC

BS ISO 3534-3 Statistics. Vocabulary and symbols. Part 3. Design of experiments

BS ISO 2954 Mechanical vibration of rotating and reciprocating machinery. Requirements for instruments for measuring vibration severity

BS EN 1175-2 AMD1 Safety of industrial trucks. Electrical requirements. Part 2. General requirements of internal combustion engine powered trucks MHE/7

SS/1

GME/21/2

10/30187742 DC BS EN 1175-3 AMD1 Safety of industrial trucks. Electrical requirements. Part 3. Specific requirements for the electric power transmission systems of internal combustion engine powered trucks MHE/7

10/30189302 DC BS EN ISO 19131 AMD1 Geographic information. Data product specifications IST/36

10/30199169 DC BS ISO 12406 Surface chemical analysis. Secondary ion mass spectrometry. Method for depth profiling of arsenic in silicon

Comments for the above document are required by 25 June, 2010

10/30205809 DC

CII/60

10/30199179 DC BS ISO 28600 Surface chemical analysis. Data transfer format for scanning-probe microscopy CII/60

BS ISO 776 Pulps. Determination of acidinsoluble ash PAI/11

10/30206130 DC

10/30193837 DC

10/30200334 DC

BS EN ISO 3630-5 Dentistry. Root-canal instruments. Part 5. Shaping and cleaning instruments

BS ISO 129-1 Technical drawings. Indication of dimensions and tolerances. Part 1. General principles

CH/106/4

TDW/4

Update Standards May 2010

EPL/48

Prices may be subject to change.

BS EN 16012 Thermal insulation for buildings. Reflective insulation products. Determination of the declared thermal performance B/540/9

Comments for the above document are required by 28 July, 2010

31

Draft British Standards for Public Comment continued... 10/30206580 DC

10/30209871 DC

10/30214655 DC

BS ISO/IEC 29109-6 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Part 6. Iris image data

BS ISO 20176 Road vehicles. H-point machine (HPM II). Specifications and procedure for H-point determination

BS EN 16072 Intelligent transport systems. ESafety. Pan European eCall-Operating requirements

AUE/12

EPL/278

IST/44

Comments for the above document are required by 31 May, 2010

10/30206587 DC BS ISO/IEC 29109-8 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794. Part 8. Finger pattern skeletal data IST/44

Comments for the above document are required by 31 May, 2010

10/30207705 DC BS ISO/IEC 15444-11 AMD1 Information technology. JPEG 2000 image coding system. Part 11. Wireless

10/30210450 DC BS EN 61076-4-116 Connectors for electronic equipment. Product requirements. Part 4-116. Printed board connectors. Detail specification for a high-speed two-part connector with integrated shielding function

10/30214867 DC BS EN ISO 21049 Pumps. Shaft-sealing systems for centrifugal and rotary pumps £33.00 members, £66.00 non-members MCE/6

EPL/48

10/30214877 DC

Comments for the above document are required by 14 May, 2010

BS ISO 17769-2 Liquid pumps and installation. General terms. Definitions, quantities, letter symbols and units. Part 2. Pumping system

10/30211442 DC BS EN 62047-10 Semiconductor devices. Micro electromechanical devices. Part 10. Micro-pillar compression test for MEMS materials EPL/47

MCE/6

10/30214897 DC BS ISO 3898 Bases for design of structures. Names and symbols of physical quantities. Generic quantities

IST/37

Comments for the above document are required by 14 May, 2010

10/30207724 DC

10/30211446 DC

BS ISO 18941 Imaging materials. Colour reflection prints. Test method for ozone gas fading stability

BS EN 62047-11 Semiconductor devices. Microelectromechanical devices. Part 11. Test method for linear thermal expansion coefficients of MEMS materials

BS ISO 17769-1 Liquid pumps and installation. General terms. Definitions, quantities, letter symbols and units. Part 1. Liquid pumps

EPL/47

MCE/6

Comments for the above document are required by 14 May, 2010

10/30214931 DC

CPW/42

10/30207740 DC BS ISO 12949 Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets FSH/21/7

Comments for the above document are required by 1 July, 2010

10/30207746 DC BS ISO 20805 Hot-rolled steel sheet in coils of higher yield strength with improved formability and heavy thickness for cold forming ISE/109

10/30212177 DC BS EN 12405-1 AMD2 Gas meters. Conversion devices. Part 1. Volume conversion GSE/25

10/30212192 DC

EH/2/3

Comments for the above document are required by 31 July, 2010

BS EN 1534 Wood flooring. Determination of resistance to indentation (Brinell). Test method B/543

10/30214952 DC BS EN 14169-2 Protection profile for secure signature creation device. Part 2. Device with key generation

IST/37

BS EN 13108-9 Bituminous mixtures. Material specifications. Part 9. Bituminous mixture for Ultra-thin layer Asphalt Concrete (UTLAC)

10/30213237 DC BS EN 16058 Influence of metallic materials on water intended for human consumption. Dynamic rig test for assessment of surface coatings with nickel layers. Long-term test method EH/6

Comments for the above document are required by 14 June, 2010

10/30214018 DC BS EN 15722 Road transport and traffic telematics. ESafety. ECall minimum set of data

10/30214955 DC

B/510/1

10/30214958 DC BS EN 1915-1 Aircraft ground support equipment. General requirements. Part 1. Basic safety requirements ACE/57

10/30214961 DC BS EN 12312-1 Aircraft ground support equipment. Specific requirements. Part 1. Passenger stairs ACE/57

EPL/278

IST/34

10/30214964 DC

10/30209768 DC

10/30214021 DC

BS ISO 13435 Textile machinery and accessories. Bars for drop wires for electrical warp stop motions

BS EN 16062 Intelligent transport systems. ESafety. ECall high level application requirements (HLAP)

TCI/33

EPL/278

10/30209804 DC

10/30214551 DC

BS ISO 7870-4 Control charts. Cumulative sum charts

BS ISO 20126 Dentistry. Manual toothbrushes. General requirements and test methods

SS/4

CH/106/7

32

10/30214922 DC

IST/17

10/30209149 DC BS EN ISO/IEC 15415 Information technology. Automatic identification and data capture techniques. Bar code symbol print quality test specification. Two-dimensional symbols

Comments for the above document are required by 15 June, 2010

BS ISO/IEC 15444-1 AMD3 Information technology. JPEG 2000 image coding system. Part 1. Core coding system

10/30209057 DC BS ISO 16000-6 Indoor air. Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID

B/525/1

Prices may be subject to change.

BS EN 12312-9 Aircraft ground support equipment. Specific requirements. Part 9. Container/pallet loaders ACE/57

10/30214967 DC BS EN 14588 Solid biofuels. Terminology, definitions and descriptions PTI/17

Comments for the above document are required by 31 July, 2010

Update Standards May 2010

10/30215039 DC

10/30216950 DC

10/30218217 DC

BS EN 690 Agricultural machinery. Manure spreaders. Safety

BS EN 13965-2 Characterization of waste. Terminology. Part 2. Management related terms and definitions

BS EN 61314-1-1 Fibre optic interconnecting devices and passive components. Fibre optic fan-outs. Part 1-1. Blank detail specification

B/508/3

GEL/86/2

AGE/32

Comments for the above document are required by 31 July, 2010

10/30217198 DC 10/30215042 DC BS EN 997 WC pans and WC suites with integral trap B/503

BS EN ISO 10426-2 Petroleum and natural gas industries. Cements and materials for well cementing. Part 2. Testing of well cements £18.00 members, £36.00 non-members PSE/17/-/3

Comments for the above document are required by 14 May, 2010

10/30218221 DC BS EN 61314-1 Fibre optic interconnecting devices and passive components. Fibre optic fanouts. Part 1. Generic specification GEL/86/2

10/30215045 DC

10/30217996 DC

BS EN 15287-1 AMD1 Chimneys. Design, installation and commissioning of chimneys. Part 1. Chimneys for non-roomsealed heating appliances

BS EN 61010-2-032 Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 2-032. Particular requirements for hand-held and handmanipulated current sensors for electrical test and measurement

B/506/1

Comments for the above document are required by 28 May, 2010

10/30215057 DC BS EN 15194 AMD1 Cycles. Electrically power assisted cycles. EPAC Bicycles GME/25

10/30215342 DC BS EN ISO 5403-2 Leather. Determination of water resistance of flexible leather. Part 2. Repeated angular compression (Maeser)

EPL/66

Comments for the above document are required by 11 May, 2010

BS EN 50085-2-1 AMD Cable trunking systems and cable ducting systems for electrical installations. Part 2-1. Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings PEL/213

10/30218152 DC

10/30215969 DC BS EN 60127-7 Miniature fuses. Part 7. Miniature fuse-links for special applications

BS EN 50539-11 Low-voltage surge protective devices. Surge protective devices for specific application including D.C. Part 11. Requirements and tests for SPDs in photovoltaic applications

PEL/32

PEL/37/1

BS EN 12666-1 AMD1 Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Part 1. Specifications for pipes, fittings and the system

10/30218180 DC BS EN 60904-5 Photovoltaic devices. Part 5. Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method GEL/82

PRI/88/1

10/30216645 DC BS EN 12226 Geosynthetics. General tests for evaluation following durability testing B/553

Comments for the above document are required by 28 June, 2010

10/30216724 DC BS EN 15210-2 Solid biofuels. Methods for the determination of mechanical durability of pellets and briquettes. Briquettes PTI/17

Comments for the above document are required by 31 July, 2010

10/30218198 DC BS EN 50132-5-3 Alarm systems. CCTV surveillance systems for use in security applications. Part 5-3. Video transmission. Analogue and digital video transmission GW/1/10

Comments for the above document are required by 27 August, 2010

BS EN 60874-1 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Part 1. Generic specification GEL/86/2

Comments for the above document are required by 14 May, 2010

10/30218229 DC BS EN 60874-1-1 Fibre optic interconnecting devices and passive components. Connectors for optical fibres and cables. Part 1-1. Blank detail specification GEL/86/2

Comments for the above document are required by 14 May, 2010

10/30218329 DC BS EN 62271-105 High-voltage switchgear and controlgear. Part 105. Alternating switch-fuse combinations PEL/17/1

Comments for the above document are required by 21 May, 2010

10/30218335 DC BS EN 60603-7-1 Connectors for electronic equipment. Part 7-1. Detail specification for 8way, shielded, free and fixed connectors EPL/48

10/30218388 DC BS EN 60730-2-9 AMD1 Automatic electrical controls for household and similar use. Part 2-9. Particular requirements for temperature sensing controls CPL/72

10/30218209 DC

10/30218397 DC

BS EN 61274-1-1 Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors. Part 1-1. Blank detail specification

BS EN 60745-1 AMD1 Hand-held motoroperated electric tools. Safety. Part 1. General requirements CPL/116

GEL/86/2

Comments for the above document are required by 14 May, 2010

10/30216887 DC 10/30218213 DC

BS EN 60317-0-8 Specifications for particular types of winding wires. Part 0-8. General requirements. Polyester glass fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire

BS EN 61274-1 Fibre optic interconnecting devices and passive components. Adaptors for fibre optic connectors. Part 1. Generic specification

GEL/55

GEL/86/2

Comments for the above document are required by 4 June, 2010

Comments for the above document are required by 14 May, 2010

Update Standards May 2010

10/30218225 DC

10/30218149 DC

TCI/69

10/30216630 DC

Comments for the above document are required by 14 May, 2010

Prices may be subject to change.

10/30218401 DC BS EN 61029-1 AMD1 Safety of transportable motor-operated electric tools. Part 1. General requirements CPL/116

10/30218417 DC BS ISO 1652 AMD1 Rubber latex. Determination of apparent viscosity by the Brookfield test method PRI/50

33

Draft British Standards for Public Comment continued... 10/30218453 DC BS ISO/IEC 13066-1 Information technology. Interoperability with Assistive Technology (AT). Part 1. Requirements and recommendations for interoperability ICT/-/6

10/30218467 DC BS ISO/IEC 29155-1.3 Software and systems engineering. Information technology project performance benchmarking framework. Part 1. Concepts and definitions IST/15

Comments for the above document are required by 10 June, 2010

DOCUMENTS NOT ISSUED AS DPCs Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

Rolling bearings. Linear motion rolling bearings, profiled rail guides. Boundary dimensions and tolerances for series 1, 2 and 3

Rolling bearings. Linear motion rolling bearings, profiled rail guides. Boundary dimensions and tolerances for series 4 and 5

Comments for the above document are required by 28 May, 2010

These standards have been circulated as DIS for the second time. The drafts are available on request from the contact point (below).

10/30218476 DC

Contact: Committee Service Centre

BS EN 61056-2 General purpose lead-acid batteries (valve-regulated types). Part 2. Dimensions, terminals and marking

Email: [email protected]

Comments for the above document are required by 28 May, 2010

prEN ISO 1833-13 Mixtures of certain chlorofibres and certain other fibres (method using carbon disulfide/acetone)

Mixtures of acetate and certain chlorofibres (method using acetic acid)

prEN ISO 1833-15 ISO/DIS 12090-2

PEL/21

PEL/21

Mixtures of acrylic, certain modacrylics, certain chlorofibres, certain elastanes and certain other fibres (method using dimethylformamide)

prEN ISO 1833-14 ISO/DIS 12090-1

10/30218470 DC BS EN 61056-1 General purpose lead-acid batteries (valve regulated types). Part 1. General requirements, functional characteristics. Methods of test

prEN ISO 1833-12

MCE/7

Mixtures of jute and certain animal fibres (method by determining nitrogen content)

prEN ISO 1833-16 Mixtures of polypropylene fibres and certain other fibres (method using xylene)

prEN ISO 1833-17 Mixtures of chlorofibres (homopolymers of vinyl chloride) and certain other fibres (method using sulfuric acid)

prEN ISO 1833-1 General principles of testing

prEN ISO 1833-2

prEN ISO 1833-18 Mixtures of silk and wool or hair (method using sulfuric acid)

10/30218508 DC

Ternary fibre mixtures

BS EN 1089-3 Transportable gas cylinders. Gas cylinder identification (excluding LPG). Part 3. Colour coding

prEN ISO 1833-3

prEN ISO 1833-19

PVE/3/7

Mixtures of acetate and certain other fibres (method using acetone)

Mixtures of cellulose fibres and asbestos (method by heating)

10/30218548 DC

prEN ISO 1833-4

BS ISO 817 Refrigerants. Designation and safety classification

Mixtures of certain protein and certain other fibres (method using hypochlorite)

RHE/18

prEN ISO 1833-20 Mixtures of elastane and certain other fibres (method using dimethylacetamide)

prEN ISO 1833-5 10/30218859 DC BS EN ISO 21003-2 AMD1 Multilayer piping systems for hot and cold water installations inside buildings. Part 2. Pipes PRI/88/2

10/30218864 DC BS EN 140401-803 AMD1 Detail specification. Fixed low power film SMD resistors. Cylindrical. Stability classes 0,05. 0,1. 0, 25. 0,5. 1. 2 EPL/40X

10/30218867 DC BS EN 140401-802 AMD1 Detail specification. Fixed low power film SMD resistors. Rectangular. Stability classes 1; 2 EPL/40X

Mixtures of viscose, cupro or modal and cotton fibres (method using sodium zincate)

prEN ISO 1833-6 Mixtures of viscose or certain types of cupro or modal or lyocell and cotton fibres (method using formic acid and zinc chloride)

prEN ISO 1833-7 Mixtures of polyamide and certain other fibres (method using formic acid)

prEN ISO 1833-8 Mixtures of acetate and triacetate fibres (method using acetone)

prEN ISO 1833-9 Mixtures of acetate and triacetate fibres (method using benzyl alcohol)

prEN ISO 1833-10 To order visit

Mixtures of triacetate or polylactide and certain other fibres (method using dichloromethane)

www.bsigroup.com/shop

prEN ISO 1833-11 Mixtures of cellulose and polyester fibres (method using sulfuric acid)

34

Prices may be subject to change.

prEN ISO 1833-21 Mixtures of chlorofibres, certain modacrylics, certain elastanes, acetates, triacetates and certain other fibres (method using cyclohexanone) The above standards have been issued under the UAP procedure. Copies are available from the Programme Manager (below). Any comments should be submitted no later than 28 July, 2010. Contact: Eddie Levio Email: [email protected] TCI/80

prEN 4673-003 Aerospace series. Inserts, UNJ threads, selflocking, with self-broaching keys. Technical specification Please note the above document has been issued for Formal Vote. Copies of the draft are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] ACE/12

Update Standards May 2010

prEN 14516:2006/Amendment 1

EN 196-9:2010

EN 1568-2:—

Baths for domestic purposes

Methods of testing cement. Heat of hydration. Semiadiabatic method

Fire extinguishing media. Foam concentrates. Specification for high expansion foam concentrates for surface application to waterimmiscible liquids

B/516/12

prEN 14527:2006/Amendment 1 Shower trays for domestic purposes These documents are being circulated at CEN UAP stage. The drafts are available on request from the contact point (below). Contact: Committee Service Centre Email: [email protected] B/503

CEN/CENELEC UNIQUE ACCEPTANCE PROCEDURE Comments can be sent by email or by post to named contacts at:– BSI Head Office 389 Chiswick High Road London W4 4AL Tel: 020 8996 9000

EN 206-9:2010 Concrete. Additional rules for Self-compacting Concrete (SCC)

EN 384:2010 Structural timber. Determination of characteristic values of mechanical properties and density B/518

EN 534:2006+A1:2010 Corrugated bitumen sheets. Product specification and test methods B/542/6

EN 806-4:2010 Specifications for installations inside buildings conveying water for human consumption. Installation

EN 1071-12:2010

This document, which will not be issued as a Draft for Public Comment, is identical to the corrected version of ISO 4063:2009. It has been circulated to CEN members for voting. Contact: Sarah Meagher Email: [email protected]

RPI/13

The documents listed below have recently been issued by CEN but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

EN 54-23:2010

Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to waterimmiscible liquids CORRIGENDUM 1:March 2010

to EN 1568-3:2008

Welding and allied processes. Nomenclature of processes and reference numbers

EUROPEAN RATIFIED TEXTS

FSH/18/3

EN 1568-3:—

B/504/2

CEN EUROPEAN STANDARDS

to EN 1568-2:2008

B/517/1

prEN ISO 4063 (ISO 4063:2009)

WEE/1

CORRIGENDUM 1:March 2010

Advanced technical ceramics. Methods of test for ceramic coatings. Reciprocating wear test

FSH/18/3

EN 1568-4:— Fire extinguishing media. Foam concentrates. Specification for low expansion foam concentrates for surface application to watermiscible liquids CORRIGENDUM 1:March 2010

to EN 1568-4:2008 FSH/18/3

EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services. Safety requirements and testing FSH/17/9

EN 1071-13:2010 Advanced technical ceramics. Methods of test for ceramic coatings. Determination of wear rate by the pin-on-disk method RPI/13

EN 1912:2004+A4:2010 Structural timber. Strength classes. Assignment of visual grades and species B/518

EN 1998-2:—

EN 1097-2:2010 Tests for mechanical and physical properties of aggregates. Methods for the determination of resistance to fragmentation

Eurocode 8. Design of structures for earthquake resistance. Bridges CORRIGENDUM 1:February 2010

to EN 1998-2:2005 B/525/8

B/502

EN 1276:2009 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas. Test method and requirements (phase 2, step 1) CH/216

EN 1367-2:2009 Tests for thermal and weathering properties of aggregates. Magnesium sulfate test

EN 1998-3:— Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings CORRIGENDUM 1:March 2010

to EN 1998-3:2005 B/525/8

EN 2240-036:2010 Aerospace series. Lamps, incandescent. Lamp, code 388. Product standard ACE/6

B/502/6

EN 2240-041:2010

Fire detection and fire alarm systems. Fire alarm devices. Visual alarm devices

EN 1374:2000+A1:2010

FSH/12/5

Agricultural machinery. Silos stationary unloaders for round silos. Safety

Aerospace series. Lamps, incandescent. Lamp, code 682. Product standard ACE/6

AGE/6

EN 115-1:2008+A1:2010 Safety of escalators and moving walks. Construction and installation MHE/4

EN 196-8:2010 Methods of testing cement. Heat of hydration. Solution method B/516/12

Update Standards May 2010

EN 2240-042:2010 EN 1568-1:— Fire extinguishing media. Foam concentrates. Specification for medium expansion foam concentrates for surface application to waterimmiscible liquids CORRIGENDUM 1:March 2010

Aerospace series. Lamps, incandescent. Lamp, code 683. Product standard ACE/6

EN 2240-043:2010

to EN 1568-1:2008

Aerospace series. Lamps, incandescent. Lamp, code 685. Product standard

FSH/18/3

ACE/6

Prices may be subject to change.

35

CEN European Standards continued... EN 2240-044:2010

EN 4621:2010

EN 13042-5:2003+A1:2009

Aerospace series. Lamps, incandescent. Lamp, code 713. Product standard

Aerospace series. Inserts, MJ threads, selflocking, with self-broaching keys. Technical specification

Machines and plants for the manufacture, treatment and processing of hollow glass. Safety requirements. Presses

ACE/12

MCE/3/13

EN 4632-003:2010

EN 13060:2004+A2:2010 Small steam sterilizers

ACE/6

Aerospace series. Weldability and brazeability of materials in aerospace constructions. Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels

EN 2240-046:2010

ACE/61

EN 13071-1:—

EN 12254:2010

Stationary waste containers up to 5000 l, top lifted and bottom emptied. General requirements

ACE/6

EN 2240-045:2010 Aerospace series. Lamps, incandescent. Lamp, code 714. Product standard

Aerospace series. Lamps, incandescent. Lamp, code 715. Product standard ACE/6

EN 2240-047:2010 Aerospace series. Lamps, incandescent. Lamp, code 718. Product standard ACE/6

EN 2240-048:2010 Aerospace series. Lamps, incandescent. Lamp, code 718 NPC. Product standard ACE/6

EN 2240-049:2010 Aerospace series. Lamps, incandescent. Lamp, code 757. Product standard

Screens for laser working places. Safety requirements and testing PH/2

Aerospace series. Lamps, incandescent. Lamp, code 1064. Product standard ACE/6

EN 2241:2010 Aerospace series. Lamp caps. Dimensions ACE/6

EN 2852:2010 Aerospace series. Nuts, hexagonal, plain, normal height, normal across flats, heat resisting steel passivated. Classification: 1100 MPa/650ºC ACE/12

EN 2954-001:2010 Aerospace series. Macrostructure of titanium and titanium alloy wrought products. General requirements

EN 12371:2010 Natural stone test methods. Determination of frost resistance

to EN 13071-1:2008

EN 13071-2:—

B/545

Stationary waste containers up to 5000 l, top lifted and bottom emptied. Additional requirements for underground or partly underground systems

EN 12417:—

CORRIGENDUM 1:March 2010

Machine tools. Safety. Machining centres

to EN 13071-2:2008

CORRIGENDUM 1:March 2010

B/508/1

to EN 12417:2001+A2:2009 MTE/1/1

EN 13128:—

EN 12520:2010

Safety of machine tools. Milling machines (including boring machines)

Furniture. Strength, durability and safety. Requirements for domestic seating

CORRIGENDUM 1:March 2010

FW/0/2

to EN 13128:2001+A2:2009 MTE/1/1

EN 12525:2000+A2:2010 Agricultural machinery. Front loaders. Safety

EN 13128:2001+A2:2009

AGE/6

Safety of machine tools. Milling machines (including boring machines)

EN 12663-2:2010

MTE/1/1

Railway applications. Structural requirements of railway vehicle bodies. Freight wagons

EN 13523-8:2010

RAE/1/-/2

Coil coated metals. Test methods. Resistance to salt spray (fog)

EN 12871:2010

STI/27

Wood-based panels. Performance specifications and requirements for load bearing boards for use in floors, walls and roofs

EN 13523-10:2010 Coil coated metals. Test methods. Resistance to fluorescent UV radiation and water condensation

B/541

EN 13020:2004+A1:2010

ACE/61/-/49

Road surface treatment machines. Safety requirements

EN 3529:2010

B/513

Aerospace series. Steel FE-PM2701 (X2NiCoMo18-8-5). Vacuum induction melted and vacuum arc remelted. Solution treated and precipitation treated. Forgings. a or D ≤ 150 mm. 1750 MPa ≤ Rm ≤ 2000 MPa

CORRIGENDUM 1:March 2010 B/508/1

ACE/6

EN 2240-050:2010

LBI/35

STI/27

EN 13523-21:2010 Coil coated metals. Test methods. Evaluation of outdoor exposed panels

EN 13023:2003+A1:2010

STI/27

Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment. Accuracy grades 2 and 3

EN 13523-22:2010 Coil coated metals. Test methods. Colour difference. Visual comparison

ACE/61/-/15

MCE/3/9

EN 4619:2010

EN 13035-9:2006+A1:2010

Aerospace series. Inserts, MJ threads, selflocking, with self-broaching keys. Installation and removal procedure

Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Washing installations

ACE/12

MCE/3/13

EN 4620:2010

EN 13035-11:2006+A1:2010

Aerospace series. Inserts, MJ threads, selflocking, with self broaching keys. Design standard

Machines and plants for the manufacture, treatment and processing of flat glass. Safety requirements. Drilling machines

EN 13747:2005+A2:2010

ACE/12

MCE/3/13

B/524

STI/27

EN 13523-29:2010 Coil coated metals. Test methods. Resistance to environmental soiling (dirt pick-up and striping) STI/27

36

Prices may be subject to change.

Precast concrete products. Floor plates for floor systems

Update Standards May 2010

CEN European Standards continued... EN 13886:2005+A1:2010 Food processing machinery. Cooking kettles equipped with powered stirrer and/or mixer. Safety and hygiene requirements

CEN TECHNICAL SPECIFICATIONS

MCE/3/5

CEN/TS 13036-2:2010 EN 14351-1:2006+A1:2010 Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

Road and airfield surface characteristics. Test methods. Assessment of the skid resistance of a road pavement surface by the use of dynamic measuring systems B/510/5

Fertilizers and liming materials. Determination of carbon dioxide. Method for solid fertilizers

Specification for radio disturbance and immunity measuring apparatus and methods. Radio disturbance and immunity measuring apparatus. Measuring apparatus GEL/210/12

EN 60081:— (IEC 60081:1997/A4:2010) Double-capped fluorescent lamps. Performance specifications

B/538

EN 14397-1:2010

EN 55016-1-1:2010 (IEC CISPR 16-1-1:2010)

CEN/TS 15989:2010

AMENDMENT 4:March 2010

Firefighting vehicles and equipment. Symbols for operator controls and other displays

to EN 60081:1998

FSH/17

CPL/34/1

CII/37

EN 14492-1:— Cranes. Power driven winches and hoists. Power driven winch CORRIGENDUM 1:March 2010

to EN 14492-1:2006+A1:2009 MHE/3

EN 14492-2:— Cranes. Power driven cranes and hoists. Power driven hoists CORRIGENDUM 1:March 2010

to EN 14492-2:2006+A1:2009 MHE/3

EN 14655:2005+A1:2010 Food processing machinery. Baguette slicers. Safety and hygiene requirements MCE/3/5

EN 15434:2006+A1:2010 Glass in building. Product standard for structural and/or ultraviolet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals)

CENELEC PUBLICATIONS EUROPEAN RATIFIED TEXTS

EN 50085-2-3:2010 Cable trunking systems and cable ducting systems for electrical installations. Particular requirements for slotted cable trunking systems intended for installation in cabinets PEL/213

RAE/1/-/2

EN 15705:2010 Fertilizers. Determination of urea condensates using high performance liquid chromatography (HPLC). Isobutylidenediurea and crotonylidenediurea (method A) and methylenurea oligomers (method B) CII/37

EN 15771:2010 Vitreous and porcelain enamels. Determination of surface scratch hardness according to the Mohs scale STI/36

MCE/3

EN 60204-11:— (IEC 60204-11:2000) Safety of machinery. Electrical equipment of machines. Requirements for HV equipment for voltages above 1000 V A.C. or 1500 V D.C. and not exceeding 36 Kv CORRIGENDUM 1:February 2010

to EN 60204-11:2000

EN 60317-15:— (IEC 60317-15:2004/A1:2010) Specifications for particular types of winding wires. Polyesterimide enamelled round aluminium wire, class 180 AMENDMENT 1:March 2010

Operation of electrical installations. National annexes

to EN 60317-15:2004 GEL/55

PEL/99

EN 60317-42:— (IEC 60317-42:1997/A1:2010)

EN 50132-1:2010

Specifications for particular types of winding wires. Polyester-amide-imide enamelled round copper wire, class 200

CORRIGENDUM 1:March 2010

to EN 15663:2009

to EN 60204-1:2006

MCE/3

EN 50110-2:2010 Railway applications. Definition of vehicle reference masses

Safety of machinery. Electrical equipment of machines. General requirements CORRIGENDUM 1:February 2010

The documents listed below have recently been issued by CENELEC but have not yet been published as BS ENs. BSI has an obligation to adopt all ENs and to withdraw any conflicting British Standards (BSs) or parts of BSs. The following will be implemented as BS ENs or as amendments to BS ENs shortly. Notification of their implementation will be given in the BS EN Publications section of the relevant edition of Update Standards.

B/520/4

EN 15663:—

EN 60204-1:— (IEC 60204-1:2005)

Alarm systems. CCTV surveillance systems for use in security applications. System requirements GW/1/10

AMENDMENT 1:March 2010

to EN 60317-42:1997 GEL/55

EN 50491-2:2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS). Environmental conditions IST/6

EN 60335-2-30:— (IEC 60335-2-30:2009) Household and similar electrical appliances. Safety. Particular requirements for room heaters CORRIGENDUM 1:March 2010

to EN 60335-2-30:2009 EN 50495:2010

CPL/61/07

Safety devices required for the safe functioning of equipment with respect to explosion risks GEL/31

CEN REPORTS

EN 60335-2-89:2010 (IEC 60335-2-89:2010)

Plastics. Recommendation for terminology and characterisation of biopolymers and bioplastics

Assessment of workers’ exposure to electric and magnetic fields of industrial induction heating equipment

Household and similar electrical appliances. Safety. Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor

PRI/10

GEL/106

CPL/61/3

EN 50519:2010 CEN/TR 15932:2010

38

Prices may be subject to change.

Update Standards May 2010

EN 60601-1-2:— (IEC 60601-1-2:2007)

EN 60730-2-5:— (IEC 60730-2-5:2000/A2:2008)

EN 60950-1:— (IEC 60950-1:2005/A1:2009)

Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Electromagnetic compatibility. Requirements and tests

Automatic electrical controls for household and similar use. Particular requirements for automatic electrical burner control systems

Information technology equipment. Safety. General requirements

AMENDMENT 2:March 2010

to EN 60950-1:2005

CORRIGENDUM 1:March 2010

to EN 60601-1-2:2007 CH/62/1

EN 60601-1-3:— (IEC 60601-1-3:2008) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Radiation protection in diagnostic x-ray equipment CORRIGENDUM 1:March 2010

to EN 60601-1-3:2008 CH/62/2

EN 60601-1-6:— (IEC 60601-1-6:2006) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. Usability CORRIGENDUM 1:March 2010

to EN 60601-1-6:2007

to EN 60730-2-5:2002

AMENDMENT 1:March 2010 EPL/108

CPL/72

EN 60730-2-15:2010 (IEC 60730-2-15:2008)

EN 60964:2010 (IEC 60964:2009)

Automatic electrical controls for household and similar use. Particular requirements for automatic electrical air flow, water flow and water level sensing controls

Nuclear power plants. Control rooms. Design

CPL/72

EN 60745-2-2:2010 (IEC 60745-2-2:2003/A1:2008)

NCE/8

EN 60974-9:2010 (IEC 60974-9:2010) Arc welding equipment Installation and use

Hand-held motor-operated electric tools. Safety. Particular requirements for screwdrivers and impact wrenches

WEE/6

CPL/116

EN 61000-4-4:— (IEC 61000-4-4:2004/A1:2010)

EN 60745-2-6:2010 (IEC 60745-2-6:2003/A2:2008)

Electromagnetic compatibility (EMC). Testing and measurement techniques. Electrical fast transient/burst immunity test

Hand-held motor-operated electric tools. Safety. Particular requirements for hammers

AMENDMENT 1:March 2010

CPL/116

to EN 61000-4-4:2004 GEL/210/12

CH/62/1

EN 60745-2-11:2010 (IEC 60745-2-11:2003/A1:2008) EN 60601-1-8:— (IEC 60601-1-8:2006) Medical electrical equipment. General requirements for basic safety and essential performance. Collateral standard. General requirements, test and guidance for alarm systems in medical electrical equipment and medical electrical systems CORRIGENDUM 1:March 2010

to EN 60601-1-8:2007

Hand-held motor-operated electric tools. Safety. Particular requirements for reciprocating saws (jig and sabre saws) CPL/116

Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. General requirements CORRIGENDUM 2:March 2010

to EN 60670-1:2005 PEL/23

CPL/116

Live working. Insulating sticks and attachable devices. Insulating sticks

EN 61029-2-8:2010 (IEC 61029-2-8:1995)

PEL/78

Safety of transportable motor-operated electric tools. Particular requirements for single spindle vertical moulders

EN 60832-2:2010 (IEC 60832-2:2010)

Thermal-links. Requirements and application guide

PEL/78

EN 61029-2-10:2010 (IEC 61029-2-10:1998)

EN 60891:2010 (IEC 60891:2009)

Safety of transportable motor-operated electric tools. Particular requirements for cutting-off grinders

Photovoltaic devices. Procedures for temperature and irradiance corrections to measured I-V characteristics

EN 60904-10:2010 (IEC 60904-10:2009)

AMENDMENT 2:March 2010

Photovoltaic devices. Methods of linearity measurement

to EN 60691:2003

GEL/82

PEL/32

EN 60704-1:2010 (IEC 60704-1:2010)

CPL/116

EN 61097-14:2010 (IEC 61097-14:2010) Global maritime distress and safety system (GMDSS) AIS Search And Rescue Transmitter (AIS-SART). Operational and performance requirements, methods of testing and required test results EPL/80

EN 60909-3:2010 (IEC 60909-3:2009)

Household and similar electrical appliances. Test code for the determination of airborne noise. General requirements

Short-circuit currents in three-phase A.C. systems. Currents during two separate simultaneous line-to-earth short-circuits and partial short-circuit currents flowing through earth

CPL/59

PEL/73

Update Standards May 2010

CPL/116

Live working. Insulating sticks and attachable devices. Attachable devices

GEL/82

EN 60691:— (IEC 60691:2002/A2:2010)

Safety of transportable motor-operated electric tools. Particular requirements for circular saw benches

EN 60832-1:2010 (IEC 60832-1:2010)

CH/62/1

EN 60670-1:— (IEC 606070-1:2002)

EN 61029-2-1:2010 (IEC 61029-2-1:1993)

EN 61226:2010 (IEC 61226:2009) Nuclear power plants. Instrumentation and control important to safety. Classification of instrumentation and control functions NCE/8

Prices may be subject to change.

39

CENELEC Publications continued... EN 61280-2-3:— (IEC 61280-2-3:2009)

EN 62439-4:2010 (IEC 62439-4:2010)

CENELEC HD 60364-7-709:— (IEC 60364-7-709:2007)

Fibre optic communication subsystem test procedures. Digital systems. Jitter and wander measurements

Industrial communication networks. High availability automation networks. Crossnetwork Redundancy Protocol (CRP)

Low-voltage electrical installations. Requirements for special installations or locations. Marinas and similar locations

CORRIGENDUM 1:March 2010

AMT/7

CORRIGENDUM 1:March 2010

to CENELEC HD 60364-7-709:2009

to EN 61280-2-3:2009 GEL/86/3

EN 61477:— (IEC 61477:2009)

EN 62439-5:2010 (IEC 62439-5:2010) Industrial communication networks. High availability automation networks. Beacon Redundancy Protocol (BRP)

Live working. Minimum requirements for the utilization of tools, devices and equipment

AMT/7

CORRIGENDUM 1:March 2010

EN 62439-6:2010 (IEC 62439-6:2010)

to EN 61477:2009 PEL/78

EN 61496-1:— (IEC 61496-1:2004) Safety of machinery. Electro-sensitive protective equipment. General requirements and tests CORRIGENDUM 1:February 2010

to EN 61496-1:2004 MCE/3

Industrial communication networks. High availability automation networks. Distributed Redundancy Protocol (DRP) AMT/7

EN 62563-1:2010 (IEC 62563-1:2009) Medical electrical equipment. Medical image display systems. Evaluation methods CH/62/2

EN 61978-1:2010 (IEC 61978-1:2009) Fibre optic interconnecting devices and passive components. Fibre optic passive chromatic dispersion compensators. Generic specification

CENELEC REPORTS

GEL/86/2

CLC/TR 50173-99-2:2010

EN 62061:— (IEC 62061:2005) Safety of machinery. Functional safety of safetyrelated electrical, electronic and programmable electronic control systems

Information technology. Implementation of BCT applications using cabling in accordance with EN 50173-4 TCT/7

CPL/61

EN 62115:— (IEC 62115:2003)

CLC/TR 50485:2010 Electromagnetic compatibility. Emission measurements in fully anechoic chambers

AMT/7

EN 62439-2:2010 (IEC 62439-2:2010)

CENELEC TECHNICAL SPECIFICATIONS

EN 62439-3:2010 (IEC 62439-3:2010) Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High availability Seamless Redundancy (HSR) AMT/7

40

The following IEC publications are available from BSI Customer Services (see ’How to order’ on page 2)

Rotating electrical machines. Specific methods for determining separate losses of large machines from tests. Supplement to IEC 60034-2-1 £72.99 members, £121.65 non-members

IEC 60034-18-1:2010 (Edition 2) Rotating electrical machines. Functional evaluation of insulation systems. General guidelines £43.25 members, £72.09 non-members PEL/2

Mechanical standardization of semiconductor devices. Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage £32.44 members, £54.07 non-members EPL/47

CLC/TS 50539-12:2010 Low-voltage surge protective devices. Surge protective devices for specific application including D.C. Selection and application principles. SPDs connected to photovoltaic installations PEL/37/1

Industrial communication networks. High availability automation networks. Media Redundancy Protocol (MRP) AMT/7

It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested.

IEC 60191-6-19:2010

CPL/61/21

Industrial communication networks. High availability automation networks. General concepts and calculation methods

IEC PUBLICATIONS

GEL/210/12

to EN 62115:2005

EN 62439-1:2010 (IEC 62439-1:2010)

JPEL/64

PEL/2

MCE/3

INTERPRETATION SHEET 1:MARCH 2010

Low-voltage electrical installations. Requirements for special installations or locations. Mobile or transportable units

CLC/TR 50417:2010

to EN 62061:2005

Electric toys. Safety

CENELEC HD 60364-7-717:2010 (IEC 60364-7-717:2009)

IEC 60034-2-2:2010

Safety of household and similar electrical appliances. Interpretations related to European Standards in the EN 60335 series

CORRIGENDUM 1:February 2010

JPEL/64

IEC 60297-3-106:2010 Mechanical structures for electronic equipment. Dimensions of mechanical structures of the 482, 6 mm (19 in) series. Adaptation dimensions for subracks and chassis applicable to metric cabinets or racks in accordance with IEC 60917-2-1 £37.85 members, £63.08 non-members EPL/48

HARMONIZATION DOCUMENTS

IEC 60317-1:2010 (Edition 4)

CENELEC HD 60364-4-43:2010 Low-voltage electrical installations. Protection for safety. Protection against overcurrent £62.00 members, £124.00 non-members

Specifications for particular types of winding wires. Polyvinyl acetal enamelled round copper wire, class 105 £24.33 members, £40.55 non-members

JPEL/64

GEL/55

Prices may be subject to change.

Update Standards May 2010

IEC Publications continued... IEC 60317-8:2010

IEC 60461:2010

IEC 60601-2-43:2010

(Edition 4)

(Edition 4)

(Edition 2)

Specifications for particular types of winding wires. Polyesterimide enamelled round copper wire, class 180 £24.33 members, £40.55 non-members

Time and control code £100.02 members, £166.70 non-members

Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray equipment for interventional procedures £116.24 members, £193.74 non-members

EPL/100

GEL/55

IEC/TR 60493-2:2010 IEC 60317-12:2010 (Edition 3)

Guide for the statistical analysis of ageing test data. Validation of procedures for statistical analysis of censored normally distributed data £145.98 members, £243.30 non-members

CH/62/2

IEC 60603-7-41:2010

GEL/112

Connectors for electronic equipment. Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz £35.14 members, £58.57 non-members

GEL/55

IEC 60512-7-1:2010

EPL/48

IEC 60317-13:2010

Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7a. Free fall (repeated) £18.92 members, £31.54 non-members

Specifications for particular types of winding wires. Polyvinyl acetal enamelled round copper wire, class 120 £24.33 members, £40.55 non-members

(Edition 3) Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 £24.33 members, £40.55 non-members

EPL/48

Connectors for electronic equipment. Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 500 MHz £35.14 members, £58.57 non-members

IEC 60512-9-1:2010

EPL/48

IEC 60317-17:2010

Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9a. Mechanical operation £13.52 members, £22.53 non-members

(Edition 3)

EPL/48

Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class 105 £24.33 members, £40.55 non-members

IEC 60512-9-5:2010

GEL/55

GEL/55

Connectors for electronic equipment. Tests and measurements. Endurance tests. Test 9e. Current loading, cyclic £13.52 members, £22.53 non-members

IEC 60317-25:2010

EPL/48

GEL/55

to IEC 60317-43:1997 £8.65 members, £14.42 non-members GEL/55

Automatic electrical controls for household and similar use. General requirements £156.79 members, £261.32 non-members CPL/72

IEC 60832-1:2010 Live working. Insulating sticks and attachable devices. Insulating sticks £100.02 members, £166.70 non-members

IEC 60832-2:2010

Connectors for electronic equipment. Tests and measurements. Chemical resistance tests. Test 19a. Fluid resistance of pre-insulated crimp barrels £13.52 members, £22.53 non-members

Live working. Insulating sticks and attachable devices. Attachable devices £129.76 members, £216.26 non-members

EPL/48

AMENDMENT 1:March 2010

(Edition 4)

IEC 60512-19-1:2010

PEL/78

IEC 60917-2-4:2010

IEC 60317-43:— Specifications for particular types of winding wires. Aromatic polyimide tape wrapped round copper wire, class 240

IEC 60730-1:2010

PEL/78

(Edition 3) Specifications for particular types of winding wires. Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 £24.33 members, £40.55 non-members

IEC 60603-7-51:2010

IEC 60512-24-1:2010 Connectors for electronic equipment. Tests and measurements. Magnetic interference tests. Test 24a. Residual magnetism £10.81 members, £18.02 non-members EPL/48

Modular order for the development of mechanical structures for electronic equipment practices. Sectional specification. Interface coordination dimensions for the 25mm equipment practice. Adaptation dimensions for subracks or chassis applicable in cabinets or racks in accordance with IEC 60297-3-100 (19 in) £35.14 members, £58.57 non-members EPL/48

IEC 60317-44:—

IEC 60601-2-23:2010

Specifications for particular types of winding wires. Aromatic polyimide tape wrapped rectangular copper wire, class 240

(Edition 3)

AMENDMENT 1:March 2010

to IEC 60317-44:1997 £8.65 members, £14.42 non-members GEL/55

Medical electrical equipment. Particular requirements for the basic safety and essential performance of magnetic resonance equipment for medical diagnosis £140.57 members, £234.28 non-members CH/62/4

IEC 61000-4-3:— Electromagnetic compatibility (EMC). Testing and measurement techniques. Radiated, radiofrequency, electromagnetic field immunity test AMENDMENT 2:March 2010

to IEC 61000-4-3:2006 £16.22 members, £27.03 non-members GEL/210/12

IEC/TS 60349-3:2010

IEC 60601-2-28:2010

IEC 61280-1-3:2010

(Edition 2)

(Edition 2)

(Edition 2)

Electrical traction. Rotating electrical machines for rail and road vehicles. Determination of the total losses of converter-fed alternating current motors by summation of the component losses £43.25 members, £72.09 non-members

Medical electrical equipment. Particular requirements for the basic safety and essential performance of x-ray tube assemblies for medical diagnosis £48.66 members, £81.10 non-members

Fibre optic communication subsystem test procedures. General communication subsystems. Central wavelength and spectral width measurement £43.25 members, £72.09 non-members

GEL/9/2

CH/62/2

GEL/86/3

42

Prices may be subject to change.

Update Standards May 2010

IEC Publications continued... IEC 61280-2-1:2010

IEC 62209-2:2010

(Edition 2)

Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices. Human models, instrumentation, and procedures. Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) £140.57 members, £234.28 non-members

Fibre optic communication subsystem test procedures. Digital systems. Receiver sensitivity and overload measurement £35.14 members, £58.57 non-members GEL/86/3

IEC/TR 61292-4:2010 (Edition 2) Optical amplifiers. Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including raman amplifiers £56.77 members, £94.62 non-members GEL/86/3

IEC 61300-2-1:— Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Tests. Vibration (sinusoidal) CORRIGENDUM 1:January 2010

to IEC 61300-2-1:2009 GEL/86/2

IEC 61340-5-3:2010 Electrostatics. Protection of electronic devices from electrostatic phenomena. Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices £48.66 members, £81.10 non-members GEL/101

GEL/106

IEC 62438:2010 Radiation protection instrumentation. Mobile instrumentation for the measurement of photon and neutron radiation in the environment £89.21 members, £148.68 non-members NCE/2

IEC 62439-1:2010 Industrial communication networks. High availability automation networks. General concepts and calculation methods £116.24 members, £193.74 non-members AMT/7

Industrial communication networks. High availability automation networks. Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) £116.24 members, £193.74 non-members

IEC/TR 62630:2010 Guidance for evaluating exposure from multiple electromagnetic sources £100.02 members, £166.70 non-members

IEC 61810-1:—

CORRIGENDUM 1:March 2010

to IEC 61810-1:2008 EPL/94

IEC/TR 62652:2010 Effects of engaging and separating under electrical load on connector interfaces in cabling used to support IEEE 802.af (Powerover-Ethernet) applications £72.99 members, £121.65 non-members

IEC/TR 61850-90-1:2010 Communication networks and systems for power utility automation. Use of IEC 61850 for the communication between substations £135.16 members, £225.27 non-members PEL/57

(Edition 3) Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification £38.32 members, £63.86 non-members Will not be implemented as a British Standard

ISO 4000-1:2010 (Edition 9) Passenger car tyres and rims. Tyres (metric series) £54.22 members, £90.36 non-members AUE/4

Will be implemented as an identical British Standard

ISO 4787:2010 (Edition 2) Laboratory glassware. Volumetric instruments. Methods for testing of capacity and for use £38.32 members, £63.86 non-members LBI/36/1

Will be implemented as an identical British Standard

ISO 4802-1:2010

IEC/PAS PUBLICATIONS

CH/212

IEC/PAS 61076-2-109:2010 Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for connectors M 12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz £64.88 members, £108.13 non-members EPL/48

Will be implemented as an identical British Standard

ISO 4802-2:2010 (Edition 2) Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by flame spectrometry and classification £28.91 members, £48.19 non-members CH/212

IEC/PAS 61076-2-110:2010

Integrated circuits. Measurement of electromagnetic immunity. Measurement of radiated immunity. TEM cell and wideband TEM cell method £64.88 members, £108.13 non-members EPL/47

EPL/48

44

ISO 3580:2010

Glassware. Hydrolytic resistance of the interior surfaces of glass containers. Determination by titration method and classification £26.75 members, £44.58 non-members

Connectors for electronic equipment. Product requirements. Circular connectors. Detail specification for circular connectors M 12 x 1 with screw-locking, for high speed ethernet and high speed data communication with frequencies up to 500 MHz and 10 gigabits/s £56.77 members, £94.62 non-members

IEC 62132-2:2010

Textiles. Tests for colour fastness. Colour fastness to domestic and commercial laundering £23.86 members, £39.76 non-members

(Edition 2)

(Edition 2)

PEL/57

(Edition 4)

EPL/48

IEC 61850-7-4:2010 Communication networks and systems for power utility automation. Basic communication structure. Compatible logical node classes and data object classes £148.68 members, £247.80 non-members

ISO 105-C06:2010

WEE/39

IEC 62439-3:2010

GEL/106

Electromechanical elementary relays. General requirements

The following ISO publications are available from BSI Customer Services (see ’How to order’ on page 2)

Will be implemented as an identical British Standard

IEC 61760-3:2010

EPL/501

It is BSI policy to supply the UK version of all adopted standards, which are published as British standards, unless otherwise requested.

TCI/81

AMT/7

Surface mounting technology. Standard method for the specification of components for through hole reflow (THR) soldering £56.77 members, £94.62 non-members

ISO PUBLICATIONS

Will be implemented as an identical British Standard

ISO 4986:2010 (Edition 2) Steel castings. Magnetic particle inspection £44.82 members, £74.70 non-members ISE/111

Will be implemented as an identical British Standard

Prices may be subject to change.

Update Standards May 2010

ISO 4987:2010

ISO 8536-2:2010

ISO/IEC 11989:2010

(Edition 2)

(Edition 3)

Steel castings. Liquid penetrant inspection £44.82 members, £74.70 non-members

Information technology. iSCSI management API £91.09 members, £151.81 non-members

ISE/111

Infusion equipment for medical use. Closures for infusion bottles £26.75 members, £44.58 non-members

Will be implemented as an identical British Standard

CH/212

IST/6

Will not be implemented as a British Standard. Is approved as suitable for use in the UK

Will be implemented as an identical British Standard

ISO 12123:2010

ISO 5794-1:2010 (Edition 4) Rubber compounding ingredients. Silica, precipitated, hydrated. Non-rubber tests £44.82 members, £74.70 non-members PRI/23

Will be implemented as an identical British Standard

ISO 6179:2010 (Edition 4) Rubber, vulcanized or thermoplastic. Rubber sheets and rubber-coated fabrics. Determination of transmission rate of volatile liquids (gravimetric technique) £18.07 members, £30.12 non-members PRI/22

ISO 9241-210:2010

(Edition 2)

Ergonomics of human-system interaction. Human-centred design for interactive systems £44.82 members, £74.70 non-members

Optics and photonics. Specification of raw optical glass £31.09 members, £51.81 non-members

PH/9

CPW/172/3

Will be implemented as an identical British Standard

Will not be implemented as a British Standard

ISO 10156:2010

ISO/TR 12910:2010

(Edition 3)

Light-frame timber construction. Comparison of four national design documents £54.22 members, £90.36 non-members

Gases and gas mixtures. Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets £40.48 members, £67.47 non-members Will be implemented as an identical British Standard

ISO 10216:2010 Layout key for trade documents. Paper-based documents £18.07 members, £30.12 non-members ICT/-/4

Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO 7967-5:2010 (Edition 3) Reciprocating internal combustion engines. Vocabulary of components and systems. Cooling systems £35.42 members, £59.04 non-members MCE/14/-/5

Will be implemented as an identical British Standard

PVE/3/1

Will be implemented as an identical British Standard

ISO 6422-1:2010

B/518

(Edition 2) Anodizing of aluminium and its alloys. Instrumental determination of image clarity of anodic oxidation coatings. Instrumental method £23.86 members, £39.76 non-members

ISO 13229:2010 Thermoplastics piping systems for non-pressure applications. Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings. Determination of the viscosity number and K-value £18.07 members, £30.12 non-members PRI/88/1

Will be implemented as an identical British Standard

STI/32

Will be implemented as an identical British Standard

ISO/IEC 14496-5:—

ISO 10545-6:2010

Information technology. Coding of audio-visual objects. Reference software

(Edition 2)

AMENDMENT 23:March 2010

Ceramic tiles. Determination of resistance to deep abrasion for unglazed tiles £15.91 members, £26.51 non-members

to ISO/IEC 14496-5:2001 £5.78 members, £9.64 non-members IST/37

Will be implemented as an identical British Standard

Will not be implemented as a British Standard. Is approved as suitable for use in the UK

ISO 11058:2010

ISO/IEC 14496-20:—

B/539

Will be implemented as an identical British Standard

ISO 7967-9:2010

(Edition 2)

(Edition 2) Reciprocating internal combustion engines. Vocabulary of components and systems. Control and monitoring systems £28.91 members, £48.19 non-members

Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load £33.25 members, £55.42 non-members

MCE/14

B/553

Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO 8124-3:2010

ISO 11161:—

(Edition 2)

Safety of machinery. Integrated manufacturing systems. Basic requirements

Safety of toys. Migration of certain elements £38.32 members, £63.86 non-members CW/15

Will not be implemented as a British Standard

AMENDMENT 1:March 2010

to ISO11161:2007 £5.78 members, £9.64 non-members MCE/3

Information technology. Coding of audio-visual objects. Lightweight Application Scene Representation (LASeR) and Simple Aggregation Format (SAF) AMENDMENT 2:March 2010

to ISO/IEC 14496-20:2008 £5.78 members, £9.64 non-members IST/37

Will not be implemented as a British Standard

ISO 15206:2010 Timber poles. Basic requirements and test methods £49.16 members, £81.93 non-members B/518

Will not be implemented as a British Standard

Will be implemented as an identical British Standard

ISO 16972:2010

ISO 8124-4:2010 Colorimetry. CIE 1976 L*a*b* Colour space £20.96 members, £34.94 non-members

Respiratory protective devices. Terms, definitions, graphical symbols and units of measurement £49.16 members, £81.93 non-members

CW/15

STI/14

PH/4

Will not be implemented as a British Standard

Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

Safety of toys. Swings, slides and similar activity toys for indoor and outdoor family domestic use £57.11 members, £95.18 non-members

Update Standards May 2010

ISO 11664-4:2008

Prices may be subject to change.

45

ISO Publications continued... ISO 17078-1:—

ISO/IEC 24739-3:2010

ISO 29042-7:2010

Petroleum and natural gas industries. Drilling and production equipment. Side-pocket mandrels AMENDMENT 1:March 2010

Information technology. AT attachment with packet interface-7. Serial transport protocols and physical interconnect (ATA/ATAPI-7 V3) £96.14 members, £160.24 non-members

to ISO 17078-1:2004

IST/6

Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the pollutant concentration parameter £18.07 members, £30.12 non-members

£5.78 members, £9.64 non-members

Will not be implemented as a British Standard

MCE/3

Will be implemented as an identical British Standard

PSE/17/-/4

Will be implemented as an identical British Standard

ISO 25337:2010

ISO/IEC TR 29107-1:2010

Plastics. Production quality control. Statistical method for using single measurements £33.25 members, £55.42 non-members

Information technology. Intelligent homes. Taxonomy of specifications. Taxonomy method £44.82 members, £74.70 non-members

Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the pollutant concentration parameter £38.32 members, £63.86 non-members

PRI/21

IST/6/-/12

Will not be implemented as a British Standard

Will not be implemented as a British Standard

EPL/278

Lifts (elevators). Study of the use of lifts for evacuation during an emergency £44.82 members, £74.70 non-members

Water quality. Determination of total nitrogen after UV digestion. Method using flow analysis (CFA and FIA) and spectrometric detection £31.09 members, £51.81 non-members

MHE/4

EH/3/2

Will be implemented as an identical British Standard

Will not be implemented as a British Standard

ISO 17386:2010 (Edition 2)

Will be implemented as an identical British Standard

ISO/IEC TR 19791:2010 (Edition 2) Information technology. Security techniques. Security assessment of operational systems £96.14 members, £160.24 non-members IST/33

Will be implemented as an identical British Standard

ISO 21809-5:2010

ISO/TR 25743:2010

ISO/IEC TR 29794-4:2010 ISO 27186:2010 Active implantable medical devices. Four-pole connector system for implantable cardiac rhythm management devices. Dimensional and test requirements £69.40 members, £115.66 non-members

Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems. External concrete coatings £42.65 members, £71.08 non-members

CH/150/6

PSE/17/2

(Edition 2)

Will be implemented as an identical British Standard

ISO/TS 22002-1:2009 Prerequisite programmes on food safety. Food manufacturing £35.42 members, £59.04 non-members

Will be implemented as an identical British Standard

ISO 27427:2010 Anaesthetic and respiratory equipment. Nebulizing systems and components £51.32 members, £85.54 non-members CH/121/5

ISO 22840:2010 Intelligent transport systems. Devices to aid reverse manoeuvres. Extended range backing aid systems (ERBA) £40.48 members, £67.47 non-members

ISO 28640:2010 Random variate generation methods £57.11 members, £95.18 non-members SS/5

Will be implemented as an identical British Standard

ISO 29042-5:2010

Will be implemented as an identical British Standard

Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet £18.07 members, £30.12 non-members

Soil quality. Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates £28.91 members, £48.19 non-members

IST/44

Will be implemented as an identical British Standard

ISO/IEC TR 29794-5:2010 Information technology. Biometric sample quality. Face image data £31.09 members, £51.81 non-members IST/44

Will be implemented as an identical British Standard

ISO/PAS PUBLICATIONS ISO/PAS 3930:2009

EPL/278

ISO/TS 22939:2010

Information technology. Biometric sample quality. Finger image data £31.09 members, £51.81 non-members

Will not be implemented as a British Standard

AW/90

Will be implemented as an identical British Standard

ISO 29441:2010

MCE/3

Instruments for measuring vehicle exhaust emissions. Metrological and technical requirements. Metrological control and performance tests £51.32 members, £85.54 non-members MCE/22

Help Us to Help You! Always quote your Customer Number

Will be implemented as an identical British Standard Don’t know your number?

EH/4

Will be implemented as an identical British Standard

ISO 29042-6:2010 Information technology. Real-time locating systems (RTLS). Chirp spread spectrum (CSS) at 2,4 GHz air interface £65.06 members, £108.43 non-members

Safety of machinery. Evaluation of the emission of airborne hazardous substances. Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet £18.07 members, £30.12 non-members

IST/34

MCE/3

Will be implemented as an identical British Standard

Will be implemented as an identical British Standard

ISO/IEC 24730-5:2010

46

Prices may be subject to change.

Contact Customer Services 020 8996 9001 who will be happy to check it for you

Update Standards May 2010