BQ Fencing
Short Description
Bills of Quantities for Fencing and Gate...
Description
BILL NO.1 : INFRASTRUCTURE INFRASTRUCTURE WORKS (ALL PROVISIONAL) ELEMENT NO. 1: FENCING AND GATE RATE AMOUNT DESCRIPTION UNIT QTY RM RM
ITEM REF
This bills of quantities shall be read in conjunction with preambles and specifications specifications ELEMENT NO.1 : FENCING AND GATE Excavation Works Excavate holes for concrete base commencing from formation level, 300mm x 300mm x 750mm high and removed excavated material from site A
Fencing post base
NO
95
B
Intermediate straining post
NO
24
C
Straining post
NO
22
D
Angle post
NO
7
E
End post
NO
1
Excavate holes for concrete base commencing from formation level, 300mm x 300mm x 600mm high and removed excavated material from site F
Fencing post base
NO
23
G
Angle post
NO
7
H
Strut base
NO
2
J
Excavate trenches to receive concrete kerb starting from M3
10
formation level maximum depth not exceeding exceeding 250mm high Plain in-situ concrete Grade 15 as describe to:K
Fencing post base
M3
8
L
Intermediate straining post
M3
2
M
Straining post
M3
1
N
Angle post
M3
1
P
End post
M3
1
Q
Kerb
M3
10
R
Sawn formwork as described to sides of kerb, horizontally horizontally
M
571
TOTAL TO COLLECTION
BQ1/1/1
BILL NO.1 : INFRASTRUCTURE WORKS (ALL PROVISIONAL) ELEMENT NO. 1: FENCING AND GATE RATE AMOUNT DESCRIPTION UNIT QTY RM RM
ITEM REF
This bills of quantities shall be read in conjunction with preambles and specifications ELEMENT NO.1 : FENCING AND GATE (CONT'D) Chain Link Fence A
Chain link fencing 3000mm high; post size 57mm x 57mm x 6mm thick mild steel angle, 30 degree bent at top, fishtailed at base, 3000mm above and 750mm below ground surface, 3000mm interval; struts size 50mm x 50mm x 6mm thick mild steel angle, fishtailed base, 15000mm interval; 63.5mm x 63.5mm x 10 SWG PVC coated chain link mesh, I number NO10 SW G straining wire clipped to post; 3 numbers strand barbed wire , 150mm point spacing; in situ concrete grade 15 kerb size 150mm x 225mm (measured separetely).
M
286
M
68
Metal Bar Fence B
Metal bar fencing 3000mm high post size 200mm x 200mm Precast concrete post, 3000mm high above ground surface, 600mm below ground surface, 3000mm interval, metal spaced 300mm; size 25mm x 25mm mild steel hollow section rail welded, 3 numbers rails size 50mm x 50mm mild steel hollow section housed into top, intermediate and bottom of precast concrete post. Gate
C
Double swing gates, size 4370mm x 3000mm (overall), each constructed of 25mm x 25mm rectangular hollow section steel frames; mitred at joints; 50mm x 50mm rectangular hollow section steel frame, 100mm centre; 2 numbers mild steel hinges; 12mm x 230mm long mild steel bolt; 1.5mm Thick mild steel plate welded to 50mm x 25mm rectangular hollow section steel frame; 25mm x 25mm mild steel stop; 12mm diameter x 250mm long mild steel barrel bolt; 20mm diameter internal mild steel sleeve in mild steel vertical plate; 25mm (internal) mild steel sleeve 3mm Thick cast in concrete; all welded together NO as per Drawing no. PUB/QSD381/4.
1
Special Post D
Extra over 50mm x 50mm x 6mm Thick angle post 3000mm long, 30 degree bent at top and base cast into concrete base (measured separetely) and with top end welded to angle post fixed raking 45 degree.
TOTAL TO COLLECTION
BQ1/1/2
NO
7
BILL NO.1 : INFRASTRUCTURE WORKS (ALL PROVISIONAL) ELEMENT NO. 1: FENCING AND GATE RATE AMOUNT DESCRIPTION UNIT QTY RM RM
ITEM REF
This bills of quantities shall be read in conjunction with preambles and specifications ELEMENT NO.1 : FENCING AND GATE (CONT'D) Special Post (Cont'd) A
Extra over 50mm x 50mm x 6mm Thick intermediate straining post 3000mm long at every 5th post, 30 degree bent at top; 1 number strut size 50mm x 50mm x 6mm Thick mild steel angle and base cast into concrete base (measured separetely) and
B
C
with top end welded to angle post fixed raking 45 degree.
NO
24
Extra over 50mm x 50mm x 6mm Thick straining post 3000mm long at every 10th post, 450mm bent at top; 2 numbers strut size 50mm x 50mm x 6mm Thick mild angle and base cast into concrete base (measured separetely) and with top end welded to angle post fixed raking 45 degree.
NO
22
Extra over 50mm x 50mm x 6mm Thick end post 3000mm long, 30 degree bent at top; 2 numbers strut size 50mm x 50mm x 6mm Thick mild angle and base cast into concrete base (measured separetely) and with top end welded to angle post fixed raking 45 degree.
NO
1
M2
199
Painting to concrete surfaces with one coat alkali primer sealer and two coats emulsion paint exceeding 300mm girth. M2
54
Painting D
E
Painting to metalworks with one coat metallic primer and finishes with two coats of gloss enamel paint exceeding 300mm girth.
TOTAL TO COLLECTION
BQ1/1/3
ITEM REF
BILL NO.1 : INFRASTRUCTURE WORKS (ALL PROVISIONAL) ELEMENT NO. 1: FENCING AND GATE RATE AMOUNT DESCRIPTION UNIT QTY RM RM This bills of quantities shall be read in conjunction with preambles and specifications ELEMENT NO.1 : FENCING AND GATE (CONT'D) COLLECTION PAGE: BQ1/1/1 BQ1/1/2 BQ1/1/3
TOTAL TO SUMMARY
BQ1/1/4
View more...
Comments
