Boeing BMS (Boeing Material Specification)

BMS numbers with description

Página 1 de 7

BMS numbers with description: Use Ctrl+F to search this page. BMS1-2 BMS1-3 BMS1-4 BMS1-6 BMS1-7 BMS1-8 BMS1-9 BMS1-10 BMS1-11 BMS1-12 BMS1-13 BMS1-14 BMS1-15 BMS1-17 BMS1-18 BMS1-19 BMS1-20 BMS1-22 BMS1-23 BMS1-24 BMS1-25 BMS1-26 BMS1-27 BMS1-28 BMS1-29 BMS1-30 BMS1-31 BMS1-32 BMS1-33 BMS1-34 BMS1-35 BMS1-36 BMS1-37 BMS1-38 BMS1-39 BMS1-40 BMS1-41 BMS1-43 BMS1-44 BMS1-45 BMS1-46 BMS1-47 BMS1-50 BMS1-51 BMS1-52 BMS1-53 BMS1-54 BMS1-57 BMS1-58 BMS1-59 BMS1-60 BMS1-61 BMS1-62 BMS1-63 BMS1-68 BMS1-69 BMS1-70 BMS1-71 BMS1-72 BMS2-2 BMS3-2 BMS3-3 BMS3-4 BMS3-6 BMS3-7 BMS3-8 BMS3-9 BMS3-11 BMS3-14 BMS3-18 BMS3-19 BMS3-22 BMS3-23 BMS3-24 BMS3-25 BMS3-26 BMS3-27 BMS3-28 BMS3-29 BMS3-32 BMS3-33 BMS3-34 BMS3-35 BMS3-38 BMS3-39 BMS4-1 BMS4-2 BMS4-3 BMS4-4 BMS4-5 BMS4-6 BMS4-7 BMS4-8 BMS4-10 BMS4-12 BMS4-13 BMS4-15 BMS4-17 BMS4-20 BMS4-23 BMS4-25 BMS5-1 BMS5-1-1 BMS5-6 BMS5-7 BMS5-8 BMS5-10 BMS5-10-1 BMS5-11 BMS5-12 BMS5-13 BMS5-14 BMS5-15 BMS5-16 BMS5-17 BMS5-18 BMS5-19 BMS5-20 BMS5-22 BMS5-24 BMS5-25 BMS5-26 BMS5-27

SYNTHETIC RUBBER; GENERAL PURPOSE, WEATHER RESISTANT SYNTHETIC RUBBER CORK AROMATIC FUEL RESISTANT FLEXIBLE FITTING ASSEMBLIES MOUNTING; SYNTHETIC RUBBER CONTROL CABLE AIR SEALS HOSE: FLEXIBLE COOLING AIR RUBBER, SPONGE (CLOSED CELL) SYNTHETIC RUBBER, HOT OIL RESISTANT WEATHER, LOW TEMPERATURE RESISTANT POLYCHLOROPRENE RUBBER FLAT GASKET MATERIALS FOR AIRCARFT APPLICATIONS FABRIC INSERTED AIR SEAL DIAPHRAGM MATERIAL SYNTHETIC RUBBER - LOW TEMPERATURE CELLULAR RUBBER FABRIC, SILICONE RUBBER COATED SYNTHETIC RUBBER, GENERAL PURPOSE SILICONE SYNTHETIC RUBBER - HIGH TEMPERATURE SYNTHETIC RUBBER, FLAME RESISTANT SILICONE SYNTHETIC RUBBER, LOW TEMPERATURE TEAR RESISTANT SILICONE SILICONE SPONGE RUBBER, CLOSED CELL SYNTHETIC RUBBER; OIL, WEATHER AND FLAME RESISTANT AIR SEAL MATERIAL, DIAPHRAGM TYPE SYNTHETIC RUBBER, LOW TEMPERATURE FUEL AND WEATHER RESISTANT SYNTHETIC RUBBER, WEATHER AND HYDRAULIC FLUID RESISTANT RUBBER, AIR SEAL MATERIAL 20 DUROMETER RUBBER, SYNTHETIC, CABLE SEAL MATERIAL INSULATION, PIPE & TUBING, LOW TEMPERATURE, FLEXIBLE RUBBER, MECHANICAL FORMING SYNTHETIC RUBBER, TEAR RESISTANT, 70 DUROMETER SYNTHETIC RUBBER, WEATHER AND SKYDROL 500 RESISTANT SYNTHETIC RUBBER, TEAR RESISTANT, LOW AND HIGH TEMPERATURE RESISTANT, SILICONE FABRIC REINFORCED DIAPHRAGM MATERIAL SYNTHETIC RUBBER, SKYDROL RESISTANT LOW AND HIGH TEMPERATURE SILICONE SYNTHETIC RUBBER, BUTYL LOW REBOUND RUBBER, SYNTHETIC, FLAME RESISTANT FOR ABLATION APPLICATIONS ELECTRICAL CABLE JACKETING MATERIAL, POLYCHLOROPRENE SYNTHETIC RUBBER, UNCURED, LOW AIR PERMEABILITY HEAT SHRINKABLE MOLDED AND EXTRUDED MATERIAL SYNTHETIC RUBBER, FUEL RESISTANT, LOW AND HIGH TEMPERATURE FLUROSILICONE SYNTHETIC RUBBER, UNCURED, TYGUM MATERIAL SYNTHETIC RUBBER, HIGH STRENGTH SILICONE SYNTHETIC RUBBER, HIGH STRENGTH TEAR RESISTANT, SILICONE, FOR ABLATIVE AND INSULATIVE APPLICATIONS MARKING PATCH SHEET, NEOPRENE ELECTRIC CABLE SYNTHETIC RUBBER WEATHER, OZONE AND BMS3-11 RESISTANT CLOSED CELL SYNTHETIC CELLULAR RUBBER, OZONE AND BMS3-11 RESISTANT SYNTHETIC RUBBER, HIGH PERFORMANCE SILICONE SYNTHETIC RUBBER, FUEL RESISTANT FLUOROSILICONE ELASTOMER, SYNTHETIC FOR ELEVATED TEMPERATURE SERVICE SILICONE RUBBER, BMS3-11 RESISTANT, HIGH PHYSICAL PROPERTIES SLEEVING, SPLIT MECHANICAL CLOSURE SILICONE RUBBER, SELF EXTINGUISHING SPECIALTY TYPE SPONGE RUBBER, CLOSED CELL MICROWAVE ABSORBING MATERIAL SILICONE RUBBER, HIGH PERFORMANCE, HIGH MODULUS SILICONE RUBBER, SELF EXTINGUISHING, FOR AIRCRAFT INTERIORS MODIFIED CLOSED CELL SILICONE FOAM RUBBER, FIRE RETARDANT, LOW COMPRESSION SET, PHOSPHATE ESTER RESISTANT SELF-EXTINGUIHING-LOW COMPRESSION SET SILCONE SPONGE RUBBER SILICONE ELASTOMERIC MATERIAL, VACUUM STABLE ELASTOMER, SYNTHETIC FOR PASSENGER WINDOW SEALS SILICONE RUBBER, FIRE RETARDANT, FOR AIRCRAFT INTERIORS SPRUCE (SITKA), INDUSTRIAL CLEAR CLEANING SOLVENT, GENERAL PURPOSE BONDED SOLID FILM DRY LUBRICANTS FLUID, HIGH TEMPERATURE HYDRAULIC (MLO 7277 MODIFICATION I TYPE) SPECIAL SLIP CLUTCH ASSEMBLY LUBRICANT LUBRICATING OIL, AIRCRAFT AIR COMPRESSORS SOLID FILM LUBRICANT, LIQUID DISPERSED CONDUCTIVE LUBRICANTS HYDRAULIC FLUID, FIRE RESISTANT GREASE, HIGH TEMPERATURE LUBRICANT, SOLID FILM, FOR HIGH TEMPERATURE FASTENERS AND THREADED PARTS SOLID LUBRICANT COMPACT BEARING MATERIALS HIGH TEMPERATURE LUBRICANT ORGANIC CORROSION INHIBITING COMPOUND GREASE, AIRCRAFT: BALL AND ROLLER BEARING, WIDE TEMPERATURE RANGE LUBRICANTS, VACUUM STABLE ORGANIC CORROSION INHIBITING COMPOUNDS, HEAVY DUTY CORROSION INHIBITING MATERIAL, NONDRYING RESIN MIX ANTI-SEIZE COMPOUND, GENERAL PURPOSE ADVANCED ORGANIC CORROSION INHIBITING COMPOUNDS LANDING GEAR SHOCK STRUT FLUID, ANTI-WEAR GREASE, AIRCRAFT, GENERAL PURPOSE GREASE, MAINTENANCE-FREE, ROLLING ELEMENT BEARING, AIRCRAFT HEAVY DUTY CORROSION INHIBITING COMPOUNDS CORROSION INHIBITING MATERIAL, NON-DRYING PASTE SELF-LUBRICATING LINER ALUMINUM-BALSA SANDWICH PANELS HONEYCOMB CORE SANDWICH SPECIFICATION FOR ALUMINUM- HONEYCOMB ALUMINUM FACED SANDWICH MATERIAL HONEYCOMB CORE 5052 AQLUMINUM ALLOY HONEYCOMB CORE 3003 ALUMINUM ALLOY FLEXIBLE 5052 ALUMINUM ALLOY CORE ALUMINUM-HONEYCOMB-ALUMINUM FACED SANDWICH MATERIAL PAPER HONEYCOMB CORE SANDWICH PANELS END GRAIN BALSA CORE WELDED TITANIUM HONEYCOMB CORE SANDWICH PANELS POLYVINYL CHLORIDE FOAM CORE WELDED NICKEL ALLOY HONEYCOMB CORE UNIDIRECTIONAL FIBERGLASS FACED NOMEX HONEYCOMB CORE FLOOR PANEL STOCK UNIDIRECTIONAL AND WOVEN GRAPHITE AND GLASS CLOTH FACED NOMEX HONEYCOMB CORE FLOOR PANEL STOCK UNIDIRECTIONAL FIBERGLASS FACED ALUMINUM HONEYCOMB CORE FLOOR PANEL STOCK HONEYCOMB CORE 5056 ALUMINUM ALLOY SEALING PUTTY RUBBER, AIR SEAL MATERIAL, 20 DUROMETER POST ASSEMBLY PRESSURE SEALANT ADHESIVE, NEOPRENE BASE SMOOTHING AND FILLING COMPOUNDS ROOM TEMPERATURE CURING EPOXY ADHESIVE SYSTEM CHEMICALLY MILLED STEEL FILLETING STYLE FUEL TANK SEALANT FUEL PRESSURE AND MOISTURE SEALANTS AERODYNAMIC SMOOTHER ADHESIVE - SYNTHETIC RUBBER, BUNA-N STRUCTURAL ADHESIVES FOR METAL TO METAL ASSEMBLIES- METALBOND 303 SYSTEM TWO PART HOLE FILLING COMPOUND METAL TO METAL STRUCTURAL ADHESIVES FOR ELEVATED TEMPERATURE SERVICE HIGH TEMPERATURE SEALANTS PRESSURE, WEATHER AND FUEL CAVITY SEALANT STRUCTURAL ADHESIVES FOR METAL TO METAL SANDWICH ASSEMBLIES- NARMTAPE 102 SYSTEM FIREWALL SEALANT NONSLIP AIRCRAFT WALKWAY COATING EPOXY-AMINE ADHESIVE FOR NON-STRUCTURAL BONDING INTEGRAL FUEL TANK SEALANT DECAL ADHESIVE

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010

BMS numbers with description

BMS5-28 BMS5-29 BMS5-30 BMS5-31 BMS5-32 BMS5-33 BMS5-34 BMS5-35 BMS5-36 BMS5-37 BMS5-38 BMS5-39 BMS5-40 BMS5-41 BMS5-42 BMS5-43 BMS5-44 BMS5-45 BMS5-47 BMS5-49 BMS5-51 BMS5-52 BMS5-54 BMS5-55 BMS5-56 BMS5-57 BMS5-58 BMS5-59 BMS5-60 BMS5-61 BMS5-62 BMS5-63 BMS5-69 BMS5-70 BMS5-71 BMS5-72 BMS5-79 BMS5-80 BMS5-81 BMS5-84 BMS5-89 BMS5-90 BMS5-91 BMS5-92 BMS5-93 BMS5-94 BMS5-95 BMS5-101 BMS5-102 BMS5-104 BMS5-105 BMS5-106 BMS5-107 BMS5-108 BMS5-109 BMS5-113 BMS5-114 BMS5-115 BMS5-121 BMS5-122 BMS5-123 BMS5-125 BMS5-126 BMS5-127 BMS5-128 BMS5-129 BMS5-133 BMS5-136 BMS5-137 BMS5-138 BMS5-139 BMS5-141 BMS5-142 BMS5-146 BMS5-148 BMS5-149 BMS5-150 BMS5-154 BMS5-157 BMS5-158 BMS5-160 BMS6-4-1 BMS6-8-1 BMS6-8-2 BMS6-8-3 BMS6-8-5 BMS6-8-6 BMS6-8-7 BMS6-8-8 BMS6-8-9 BMS7-2 BMS7-3 BMS7-4 BMS7-5 BMS7-6 BMS7-7 BMS7-8 BMS7-9 BMS7-10 BMS7-11 BMS7-12 BMS7-13 BMS7-14 BMS7-15 BMS7-16 BMS7-17 BMS7-18 BMS7-19 BMS7-20 BMS7-21 BMS7-22 BMS7-23 BMS7-24 BMS7-25 BMS7-26 BMS7-27 BMS7-28 BMS7-29 BMS7-30 BMS7-31 BMS7-32 BMS7-33 BMS7-34 BMS7-35 BMS7-37 BMS7-38 BMS7-39 BMS7-40 BMS7-41 BMS7-42

Página 2 de 7

HONEYCOMB EDGE FILLING AND POTTING COMPOUND ADHESIVE: EPOXY POLYAMIDE, 4 COMPONENT CEMENT - LOW ODOR, SYNTHETIC RUBBER ADHESIVES FOR MYLAR AND NYLON PRESSURE AND WEATHER SEALANT, LOW DENSITY HIGH TEMPERATURE SEALANT ADHESIVE, FLEXIBLE EPOXY, FOR NON-STRUCTURAL BONDING ELECTRICALLY CONDUCTIVE SEALANTS CYANOACRYLATE ADHESIVE FOR NONSTRUCTURAL BONDING COATING COMPOUND ELECTRICAL INSULATING ELEVATED TEMPERATURE AERODYNAMIC SMOOTHER CLEANINESS SEALANT STRUCTURAL ADHESIVES FOR METAL-TO-METAL SANDWICH ASSEMBLIES BLOOMINGDALE FM-58 SYSTEM PRESSURE, WEATHER AND FUEL CELL CAVITY SEALTANT, B-52G STRUCTURAL ADHESIVE FOR METAL-TO-METAL ASSEMBLIES - 350 F CURE CEMENT-GENERAL PURPOSE-NITROCELLULOSE BASE TEMPERATURE-RESISTANT, FUEL, PRESSURE, AND WEATHER SEALANT FUEL TANK SEALANT BRAZE ALLOY SUSPENDING AGENTS AND BINDERS STRUCTURAL ADHESIVES FOR METAL-TO-METAL ASSEMBLIES- AEROBOND 3013 SYSTEM MODERATE TEMPERATURE CURING STRUCTURAL ADHESIVE SYSTEM NON-ADHERING BONDING VERIFICATION FILM SEALANT, SILICONE, EXTRUDABLE LOW DUROMETER CEMENT-SYNTHETIC RUBBER - NAPHTHA SOLUBLE CEMENT - SYNTHETIC RUBBER WATER DISPERSED ADHESIVE-SILICONE PRESSURE SENSITIVE CEMENT - SILICONE - ROOM TEMPERATURE VULCANIZING CEMENT-SILICONE-THERMOSETTING QUICK SETTING EPOXY ADHESIVE FOR NON-STRUCTURAL BONDING ENVIRONMENTAL SEALANT RUBBER, SYNTHETIC, MASTIC FOR ABLATIVE AND INSULATIVE APPLICATIONS FIREWALL SEALANT, HYDRAULIC FLUID RESISTANT LAMINATED ALUMINUM SHEETS - STRUCTURALLY BONDED STRUCTURAL ADHESIVES FOR METAL-TO-SANDWICH ASSEMBLIES FM-61 SYSTEM STRUCTURAL ADHESIVES FOR METAL-TO- METAL SANDWICH ASSEMBLIES AF 204 SYSTEM INSULATION ADHESIVE FOR ELECTRONIC ASSEMBLY PRESSURE AND ENVIRONMENTAL SEALANT STRUCTURAL ADHESIVE SYSTEM FOR MODERATE TEMPERATURE CURE SEALANT, SECONDARY FUEL BARRIER POLYIMIDE PASTE ADHESIVES CORROSION INHIBITING ADHESIVE PRIMER FOAMING ADHESIVES PRESSURE SENSITIVE FILM ADHESIVE FOR INTERIOR NONSTRUCTURAL BONDING ADHESIVE, MODIFIED EPOXY FOR GENERAL PURPOSE USE LOW DENSITY POLYURETHANE SEALANT ONE-PART ADHESIVE FOR SUSTAINED EXPOSURE TO 250F PRESSURE AND ENVIRONMENTAL SEALANT-CHROMATE TYPE STRUCTURAL ADHESIVES FOR 180 F SERVICE APPLICATIONS FAST CURE THIXOTROPIC EPOXY ADHESIVE STRUCTURAL ADHESIVE FOR 350 F SERVICE APPLICATIONS URETHANE ADHESIVE FOR BONDING ADHESIVE-FLOOR PANEL BONDING ADHESIVE - FLOOR PANEL INSERT BONDING FLEXIBLE SEALING COATINGS ROOM TEMPERATURE CURING TWO PART EPOXY ADHESIVES ADHESIVE, NONSTRUCTURAL, TWO PART LIQUID, FOR INTERIOR APPLICATION TO 200F PLASTIC FILM, HIGH TEMPERATURE RESISTANT, UNSUPPORTED PLASTIC FILM, HIGH TEMPERATURE RESISTANT, LOW FLOW, UNSUPPORTED, FOR USE AS A HONEYCOMB SEPTUM MATERIAL POSITIONING FABRIC FOR STRUCTURAL ADHESIVES APPLICATION ADHESIVE, INSULATION, SELF- EXTINGUISHING, NONCRAZING FAST-SETTING EPOXY ADHESIVE COMPOUND, SELF-LEVELING, FOR FLUID DRAINAGE ADHESIVE: EPOXY POLYAMIDE, 2 COMPONENT ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS AND CORE SPLICING FOR EXTERIOR PARTS ADHESIVE, LOW OUTGASSING, LOW VISCOSITY, ROOM TEMPERATURE CURE STRUCTURAL ADHESIVES FOR COMPOSITE APPLICATION -250 F CURE CARPET TAPES SURFACE FILLERS FOR INTERIOR APPLICATIONS STRUCTURAL ADHESIVE FOR ACOUSTIC PANELS - 350 F SERVICE CARBON FILLED SEALANT IDENTIFICATION TAPES, TRANSPARENT OVERCOATINGS USED FOR PRINTED WIRING ASSEMBLIES ADHESIVE, ROOM TEMPERATURE CURE, HIGH TEMPERATURE RESISTANT MODERATE PEEL STRENGTH, LOW OUTGASSING LOW DENSITY SEALANT CARGO LINER JOINT SEALING TAPES STRUCTURAL REPAIR ADHESIVE FOR METAL BOND, 270 F SERVICE INSULATION BLANKET TAPES PRESSURE AND ENVIRONMENTAL SEALANT - NON-CHROMATE TYPE ADHESIVE FOR COMPOSITE BONDING (350 F CURE) ADVANCED INSULATION BLANKET TAPES HEAT ACTIVATED FILM ADHESIVES FOR BONDING DECORATIVE LAMINATES TO INTERIOR PARTS ADHESIVES FOR PRIMARY STRUCTURE COMPOSITE BONDING SPECIFICATION FOR PAPER HONEYCOMB CORE SANDWICH MATERIAL RIGID, FIRE RESISTANT PLASTIC SHEETING FOR GENERAL PURPOSE USE FLAME RESISTANT POLYESTER FILM SUPPORTED VINYL LAMINATE FORMED THERMAL - ACOUSTICAL INSULATION VINYL COATED SYNTHETIC FABIRC VAPOR PERMEABLE NEOPRENE COATED NYLON STRUCTURAL LOW-PRESSURE LAMINATED PHENOLIC SHEETING Flexible Polyvinyl Chloride Extrusions and Molded Parts ALUMINUM ALLOY BISCUIT HAND FORGINGS ZK60 MAGNESIUM ALLOY EXTRUDED BARS, RODS, SHAPES AND TUBING PURE TITANIUM SHEET AND STRIP (LOW RESIDUAL) ANNEALED ALUMINUM ALLOY ROLL TAPERED PLATE AND SHEET (7075) CONSUMABLE ELECTRODE VACUUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGING STOCK COMMERCIALLY PURE TITANIUM SHEET AND STRIP ANNEALED 75S-T6 ALUMINUM ALLOY EXTRUSIONS (WITH GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES) 24S-T4 ALUMINUM ALLOY EXTRUSIONS (WITH GUARANTEED MINIMUM LONG TRANSVERSE PROPERTIES HIGH LEAD BRONZE BAR, CONTINUOUS CAST (75 Cu-20Pb-5Sn) CENTRIFUGALLY CAST CORROSION AND HEAT RESISTANT ALLOY TUBE STOCK STEEL PLATE, SHEET AND STRIP, CORROSION RESISTANT 17 Cr 7 Ni 1 AL (17-7PH) EK30A-T6 MAGNESIUM ALLOY CASTINGS EZ33A-T5 MAGNESIUM ALLOY CASTINGS PRECIPITATION HARDENING STAINLESS STEEL BAR, BISCUIT, FORGINGS AND FORGING STOCK (17-7PH) HK 31XA-T6 MAGNESIUM ALLOY CASTINGS TITANIUM ALLOY FORGING, BAR AND PLATE (3A1-5Cr) LOW CARBON FORGINGS-TITANIUM ALLOY TITANIUM ALLOY FORGING AND BAR (4A1-4Mn) STEEL TUBING, SEAMLESS, (MECHANICAL) MODIFIED 4330 TITANIUM AND TITANIUM ALLOY DUCTING MAGNESIUM ALLOY SHEET AND STRIP ALUMINUM ALLOY PERMANENT MOLD AND SEMI-PERMANENT MOLD 356-T6 CASTINGS TITANIUM ALLOY FORGING, BAR AND PLATE 5Al-1.5Cr-l.5Fe-l.5Mo TITANIUM ALLOY ROD AND WIRE (4Al-4Mn) ANNEALED STEEL BAR, FORGING STOCK, AND TUBING - 4340 MODIFIED STEEL BARS, FORGING STOCK, AND MECHANICAL TUBING (4330)MODIFIED) STEEL BARS, RODS AND FORGING STOCK (4340) STEEL BARS, FORGING STOCK, AND MECHANICAL TUBING (4140) STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (8740) STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (8630) STEEL BARS, FORGING STOCK AND MECHANICAL TUBING STEEL BARS, FORGING STOCK AND MECHANICAL TUBING (4335 MODIFIED) 4330M SHEET, STRIP AND PLATE ALUMINUM ALLOY ROLL TAPERED PLATE AND SHEET (X7178) TUBING, STEEL, CORROSION- RESISTANT (18-8) AIRCRAFT HYDRAULIC SYSTEM WELD FILLER METAL, NICKEL BASE AND COBALT BASE ALLOYS TITANIUM ALLOY SHEET, PLATE AND STRIP - 6Al-4V ALUMINUM ALLOY ROLL FORGED RINGS CORROSION-RESISTANT STEEL ( AISI 321 OR 347) PNEUMATIC DUCTING ALUMINUM ALLOY CLAD 7075 SHEET AND STRIP, THIN GAUGE

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010

BMS numbers with description

BMS7-43 BMS7-44 BMS7-45 BMS7-48 BMS7-51 BMS7-53 BMS7-56 BMS7-57 BMS7-58 BMS7-59 BMS7-60 BMS7-61 BMS7-62 BMS7-63 BMS7-64 BMS7-65 BMS7-66 BMS7-67 BMS7-68 BMS7-69 BMS7-70 BMS7-71 BMS7-72 BMS7-73 BMS7-74 BMS7-75 BMS7-76 BMS7-77 BMS7-78 BMS7-79 BMS7-80 BMS7-81 BMS7-82 BMS7-83 BMS7-84 BMS7-85 BMS7-86 BMS7-87 BMS7-88 BMS7-89 BMS7-90 BMS7-91 BMS7-92 BMS7-94 BMS7-95 BMS7-96 BMS7-97 BMS7-98 BMS7-99 BMS7-100 BMS7-101 BMS7-102 BMS7-104 BMS7-105 BMS7-107 BMS7-108 BMS7-109 BMS7-110 BMS7-114 BMS7-115 BMS7-116 BMS7-118 BMS7-119 BMS7-120 BMS7-121 BMS7-122 BMS7-123 BMS7-124 BMS7-125 BMS7-126 BMS7-127 BMS7-128 BMS7-129 BMS7-130 BMS7-131 BMS7-134 BMS7-136 BMS7-138 BMS7-139 BMS7-140 BMS7-141 BMS7-143 BMS7-144 BMS7-145 BMS7-146 BMS7-148 BMS7-149 BMS7-150 BMS7-152 BMS7-153 BMS7-154 BMS7-155 BMS7-156 BMS7-157 BMS7-168 BMS7-171 BMS7-172 BMS7-174 BMS7-176 BMS7-179 BMS7-180 BMS7-181 BMS7-182 BMS7-185 BMS7-186 BMS7-187 BMS7-188 BMS7-189 BMS7-191 BMS7-192 BMS7-193 BMS7-194 BMS7-196 BMS7-197 BMS7-198 BMS7-202 BMS7-203 BMS7-207 BMS7-209 BMS7-211 BMS7-213 BMS7-214 BMS7-218 BMS7-223 BMS7-224 BMS7-225 BMS7-232 BMS7-234 BMS7-240 BMS7-243

Página 3 de 7

Ti 6Al-4V ALLOY BAR AND FORGINGS Ti, 6A1-4V, EXTRUDED AND ROLLED STRUCTURAL SHAPES AM350 SHEET AND STRIP CABLE, STEEL (CORROSION RESISTANT) FLEXIBLE, PREFORMED NON-ROTATING TYPE STEEL, CHROMIUM - NICKEL - MOLYBDENUM - 4340, SPECIAL QUALITY WELD FILLER WIRE, 16Cr-8Ni-2Mo TUBING, PNEUMATIC, HASTELLOY X SOLDERING FLUX, ORGANIC BASE HIGH STRENGTH STEEL CASTINGS WELD FILLER WIRE, 17-7PH STEEL BARS, RODS AND FORGING STOCK (AMS 6407) 1.2 Cr-2.0 Ni - 0.45 Mo ALUMINUM ALLOY TUBING, DRAWN X7075-T6, SEAMLESS TITANIUM ALLOY STRIP - 6Al-4V SHEET AND STRIP SPECIAL TOLERANCES - 17-7PH AM350 SHEET AND STRIP SPECIAL TOLERANCES PH 15-7Mo SHHET AND STRIP, SPECIAL TOLERANCES DILICON METAL POWDER TITANIUM ALLOY SHEET AND PLATE 6Al - 4V AM355 SHEET AND STRIP, SPECIAL TOLERANCES TITANIUM ALLOY, BAR AND FORGING 7Al-4Mo COLUMBIUM ALLOY WELD FILLER WIRE WELD FILLER WIRE, 13Cr-9Ni-1Al ALUMINUM ALLOY PLATES AND SHEETS, BARE, 2014 TUBING, STEEL, CORROSION- RESISTANT (18-8 STABILIZED) TUBING, STEEL, CORROSION- RESISTANT (18-8) ANNEALED AIRCRAFT HYDRAULIC SYSTEM WELD FILLER WIRE, ALUMINUM ALLOYS NICKEL BASE ALLOY SHEET AND STRIP TYPE M-252 - (J-1500) WELD FILLER WIRE, LOW ALLOY HEAT TREATABLE STEEL Castings, Magnesium Alloy, High Strength RENE' 41 TUBING STEEL-CHROMIUM-MOLYBDENUM- VANADIUM (SAE H-11 TYPE) WELD FILLER WIRE, 17-4PH NICKEL BASE ALLOY X (AISI 680, UNS N06002) PNEUMATIC DUCTING SILVER BASE BRAZING ALLOY SHEET AND PLATE, 17-4 PH WELD FILLER WIRE, PH15-7Mo TITANIUM ALLOY SHEET AND STRIP 13V-11Cr-3Al GENERAL APPLICATIONS TITANIUM ALLOY SHEET AND STRIP 4Al-3Mo-1V WELD FILLER WIRE, AM-355 WELD FILLER WIRE, B120VCA WELD FILLER WIRE, 19-9 WX PH 15-7Mo EXTRUSION PH15-7Mo Bars, Forgings, and Plate PRELIMINARY RESEARCH & DEVELOPMENT STEEL-SHEET, STRIP AND PLATE (4340 MODIFIED) NICKEL BASE ALLOY, TYPE RENE' 41, SHEET, STRIP AND PLATE ROLLED OR FORGED BARE NICKEL-BASE, HEAT-RESISTANT TYPE RENE' 41 MOLYBDENUM-0.5% TITANIUM, 0.1% ZIRCONIUM ALLOY SHEET AND STRIP COLUMBIUM - 33 TANTALUM - 1 ZIRCONIUM ALLOY SHEET AND STRIP MOLYBDENUM - 0.5% TITANIUM - 0.1% ZIRCONIUM ALLOY BAR AND ROUNDS TUBING, HYDRAULIC AM 350 ALLOY COLD REDUCED AND TEMPERED (CRT) CONDITION STEEL-SHEET PLATE AND STRIP (SAE H-11 TYPE) ULTRA HIGH STRENGTH 280-300 KSI COLUMBIAN - 1 ZIRCONIUM ALLOY SHEET AND STRIP COLUMBIUM - 10 TITANIUM - 5 ZIRCONIUM ALLOY SHEET 2219 ALUMINUM ALLOY SHEET AND PLATE CABLE: SINGLE STRAND, NONFLEXIBLE CARBON STEEL (PREFORMED) ALUMINUM ALLOY FORGED RINGS FOR SPECIAL APPLICATIONS STEEL SHEET & PLATE ALLOY STRUCTURAL, HIGH STRENGTH GENERAL PURPOSE ALUMINUM ALLOY SHEET AND PLATE, ALCLAD FOR WELDED AND HEAT TREATED APPLICATIONS (2219) 41.60M STEEL BARS, PLATES, AND FORGING STOCK (BILLETS), ALLOY, FOR SPRINGS WELD FILLER WIRE, COMMERCIALLY PURE TITANIUM Cr-Mo-A1 STEEL FOR NITRIDING, BARS, BILLETS, AND FORGING STOCK, VACUUM MELTED 2219 ALUMINUM ALLOY EXTRUSIONS FORGING, NICKEL-BASE, HEAT RESISTANT TYPE RENE? 41 FORGED BLOCK NICKEL-BASE, HEAT-RESISTANT ALLOY TYPE RENE? 41 2219 ALUMINUM ALLOY DRAWN SEAMLESS TUBE CONSUMABLE ELECTRODE VACUUM ARC REMELTED 4330 MODIFIED ( AMS 6411 ) STEEL COLUMBIUM ALLOY TUBING MOLYBDENUM ALLOY FORGINGS COLUMBIUM - 10% TITANIUM 5% ZIRCONIUM BAR AND ROUNDS MOLYBDENUM SEAMLESS TUBING PLATINUM ALLOY WIRE BRAZING ALLOY TITANIUM AND ZIRCONIUM BASE HASTELLOY X FOIL COLD ROLLED COLUMBIUM - 10 TUNGSTEN - 10 HAFNIUM ALLOY SHEET AND STRIP 2219 ALUMINUM ALLOY FORGINGS Weld Filler Wire, Corrosion and Heat Resistant Alloys (AISI 3-12) AGE HARDENABLE NICKEL ALLOY (12.5 Cr-6 Mo-2.6 Ti-34 Fe) SHEET, STRIP AND PLATE (INCOLOY 901) PALLADIUM FOIL TUBE, STEEL (CARBON, MECHANICAL; SEAMLESS AND WELDED) PIPE AND TUBING, HASTELLOY X, COMMERCIAL QUALITY HEAT RESISTANT BRAZING ALLOYS TUBING, HASTELLOY "C", SPECIFICATION FOR ALLOY FORGINGS, NICKEL BASE HEAT RESISTANT, ALLOY TYPE INCONEL 718 4 - 6 INCH THICK 2219 ALUMINUM ALLOY PLATE FOR CRYOGENIC TANKAGE APPLICATION COLD DRAWN WIRE NICKEL-BASE TYPE RENE' 41 WELD FILLER WIRE, TITANIUM WELD FILLER WIRE, CORROSION AND HEAT RESISTANT ALLOYS Weld Filler Wire, Precipitation Hardening Stainless Steels MAGNESIUM ALLOY ROLL FORGED RINGS WELD FILLER WIRE, FLUX CORED WELD, FILLER WIRE LOW-CARBON STEEL Ti-6A1-4V PRESSURE VESSEL FORGINGS 356 ALUMINUM ALLOY SAND CASTINGS IN THE SOLUTION HEAT TREATED AND AGED, AND SOLUTION HEAT TREATED AND STABIL- IZATION AGED CONDITIONS 355 ALUMINUM ALLOY SAND CASTINGS IN THE SOLUTION HEAT TREATED AND AGED, AND THE SOLUTION HEAT TREATED AND STABILIZATION AGED CONDITIONS FORGINGS, CORROSION AND HEAT RESISTANT ALLOY, NICKEL BASE 15.5 Cr - 7 Fe- 2.5 Ti -1 (Cb + Ta) - 0.7 A1 (INCONEL X) FORGINGS, CORROSION AND HEAT RESISTANT ALLOY, NICKEL BASE, 19 Cr - 14 Co -4Mo- 3 Ti - 1.3 Al (Waspaloy) CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED FORGINGS, CORROSION AND HEAT RESISTANT ALLOY STEEL, IRON BASE 16 Cr - 25 Ni - 6 Mo, (16-25-6) Ti, 6A1-4V, SHEET, STRIP AND PLATE THIN WALLED FERRITIC DUCTILE IRON CASTINGS STEEL BARS, FORGINGS AND FORGING STOCK, PREMIUM QUALITY, 4140 7075 ALUMINUM ALLOY EXTRUSIONS, -T73, -T73510 AND -T73511 TEMPER TITANIUM TI-6AL-4V ALLOY CASTING STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING: 9Ni-4Co HYDRAULIC TUBING, CORROSION RESISTANT (21 Cr-6Ni-9Mn) ALUMINUM ALLOY FORGINGS NICKEL-BASE ALLOY 22Cr-9Mo-4Nb: SHEET, STRIP AND PLATE NICKEL-BASE ALLOY, NICKEL ALLOY 625 (UNS N06625), PNEUMATIC DUCTING BAR & FORGINGS. HEAT & CORROSION RESISTANT ALLOY, IRON BASE, 13 Cr, 8 Ni, 1 Al, 2.25 Mo (Ph 13-8 Mo) SHEET, STRIP, AND PLATE (21Cr-6Ni-9Mn) NICKEL BASE ALLOY (22Cr-9Mo-4Nb) RODS, BARS AND FORGING STOCK NICKEL BASE ALLOY (22Cr-9Mo-4Cb) CASTINGS HIGH STRENGTH, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE STRUCTUAL 2024 ALUMINUM ALLOY TUBING Ti, 6AI-4V, CONTINUOUSLY ROLLED SHEET AND FOIL DUCTS - ALUMINUM ALLOY TITANIUM 6AL-4V TUBING FOR STRUCTURAL APPLICATIONS TI, 3AL-2.5V, SEAMLESS TUBING FOR HYDRAULIC SYSTEMS ELECTROFORMED NICKEL PERFORATED METAL SHEET TITANIUM AND TITANIUM ALLOY FOIL, CONTINUOUSLY ROLLED BAR, WIRE, TUBING, AND FORGING STOCK HEAT AND CORROSION RESISTANT ALLOY, IRON BASE, 12Cr-9Ni-2Cu-1Ti (12-9-2 STAINLESS STEEL) HIGH STRENGTH, STRESS CORROSION RESISTANT ALUMINUM ALLOY FORGINGS WELD FILLER WIRE, TITANIUM AND TITANIUM ALLOYS CONSUMABLE ELECTRODE VACUUM ARC STEEL BILLETS, BARS AND FORGING-5 CR-1.4 MO 1.35W TIN-BASE SOLDERING ALLOY HIGH STRENGTH STEEL AND CORROSION RESISTANT ALLOY EXTRUSIONS CONDUIT, FLEXIBLE, STAINLESS STEEL TUBING: TITANIUM 3A1-2.5V SEAMLESS COLD WORKED AND STRESS RELIEVED 15-5PH (UNS S15500) SHEET, PLATE, AND STRIP PERFORATED METAL SHEET WITH FOROUS METAL OVERLAY

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010

BMS numbers with description

BMS7-244 BMS7-245 BMS7-246 BMS7-247 BMS7-249 BMS7-250 BMS7-251 BMS7-254 BMS7-255 BMS7-256 BMS7-257 BMS7-260 BMS7-261 BMS7-265 BMS7-269 BMS7-270 BMS7-272 BMS7-274 BMS7-277 BMS7-281 BMS7-282 BMS7-285 BMS7-287 BMS7-291 BMS7-302 BMS7-305 BMS7-306 BMS7-307 BMS7-308 BMS7-310 BMS7-312 BMS7-316 BMS7-318 BMS7-320 BMS7-323 BMS7-324 BMS7-325 BMS7-326 BMS7-327 BMS7-328 BMS7-329 BMS7-330 BMS7-331 BMS7-332 BMS7-333 BMS7-334 BMS7-335 BMS7-336 BMS7-337 BMS7-338 BMS7-340 BMS7-342 BMS7-343 BMS7-347 BMS7-348 BMS7-349 BMS7-353 BMS7-354 BMS7-355 BMS7-357 BMS7-360 BMS7-361 BMS7-363 BMS7-364 BMS7-367 BMS7-369 BMS7-370 BMS7-371 BMS7-372 BMS7-375 BMS7-380 BMS7-381 BMS8-2 BMS8-3 BMS8-4 BMS8-5 BMS8-6 BMS8-7 BMS8-8 BMS8-9 BMS8-10 BMS8-11 BMS8-12 BMS8-13 BMS8-14 BMS8-15 BMS8-16 BMS8-17 BMS8-18 BMS8-19 BMS8-20 BMS8-24 BMS8-25 BMS8-26 BMS8-27 BMS8-28 BMS8-29 BMS8-30 BMS8-31 BMS8-32 BMS8-33 BMS8-34 BMS8-35 BMS8-36 BMS8-37 BMS8-38 BMS8-39 BMS8-40 BMS8-41 BMS8-42 BMS8-43 BMS8-44 BMS8-45 BMS8-46 BMS8-47 BMS8-48 BMS8-49 BMS8-50 BMS8-51 BMS8-52 BMS8-53 BMS8-54 BMS8-55 BMS8-56 BMS8-57 BMS8-58 BMS8-59 BMS8-60 BMS8-61 BMS8-62

Página 4 de 7

7175 ALUMINUM ALLOY, EXTRUDED BAR, RODS AND SHAPES TITANIUM ALLOY 6Al-2Sn-4Zr-2Mo BAR FORGING STOCK AND FORGINGS TITANIUM ALLOY TI-6Al-2Sn-4Zr-2Mo, SHEET, STRIP AND PLATE TITANIUM 6Al-4V FORGINGS PREMIUM QUALITY VACCUM ARC REMELTED SAE 9310 STEEL BARS, FORGINGS, AND FORGING STOCK STEEL BARS AND FORGING STOCK SAE 4340, DOUBLE VACUUM MELTED PERFORATED TITANIUM SHEET FOR ACOUSTIC APPLICATIONS ALUMINUM ALLOY PLATE, 2324 ALUMINUM ALLOY EXTRUSIONS, 2224 ALUMINUM ALLOY PLATE, 7150 ALUMINUM ALLOY EXTRUSIONS, 7150-T651X TITANIUM 10V-2Fe-3AI FORGED BLOCK/BAR AND DIE FORGINGS ALUMINUM POWDERED METAL ALLOYS, EXTRUDED BAR, ROD AND SHAPES WIRE ROPE FOR AIRCRAFT CONTROLS-FLEXIBLE TITANIUM ALLOY 6Al-4V FORGINGS, BETA ANNEALED ALUMINUM ALLOY ROD AND WIRE, 7050 ALLOY STEEL BAR, FORGING STOCK, AND MECHANICAL TUBING - 1.83 Ni, 0.84 Cr, 2.50 Si, 0.40 Mo, 0.21 V (0.39-0.44C) FLUX, SOLDERING, LIQUID (ROSIN BASE) TYPE RA ALUMINUM POWERED METAL ALLOYS, DIE FORGINGS TITANIUM ALLOY 15V-3Cr-3AI-3Sn STRIP WELD FILLER WIRE, TWISTED, CARBON STEEL SOLDER PASTE, TIN-LEAD AND TIN-LEAD SILVER ALLOYS ALUMINUM-LITHIUM ALLOY 2090 EXTRUSIONS ALUMINUM-LITHIUM ALLOY 2090 BARE SHEET HIGH FORMABILITY 7075-0 BARE AND ALCLAD ALUMINUM SHEET HIGH FORMABILITY 2024-0 ALCLAD ALUMINUM SHEET HIGH STRENGTH, CORROSION RESISTANT ALUMINUM ALLOY EXTRUSIONS, 7150-T7751X HIGH STRENGTH 7055 ALUMINUM ALLOY PLATE HIGH STRENGTH 7055 ALUMINUM ALLOY EXTRUSIONS TI-6AI-4V HOT ISOSTATIC PRESSED CASTING HIGH FORMABILITY 6061-0 BARE ALUMINUM SHEET HIGH TOUGHNESS ALCAD ALUMINUM ALLOY 2XXX SHEET AND PLATE SUPERPLASTIC FORMABLE 7475 BARE ALUMINUM SHEET TITANIUM 3Al-8V-6Cr-4Mo-4Z r (BETA C) WIRE AND BAR, COLD DRAWN HIGH STRENGTH FATIGUE TOLERANT, STRESS CORROSION RESISTANT 7050 ALUMINUM ALLOY PLATE Ti-15V-3Cr-3Al-3S n HOT ISOSTATIC PRESSED CASTINGS 7050 ALUMINUM ALLOY SHEET (BARE) ALUMINUM-FIBERGLASS LAMINATE MATERIAL HIGH TOUGHNESS BARE ALUMINUM ALLOY 2XXX SHEET AND PLATE TUBING, ALUMINUM, 6061 ALLOY, ROUND, SEAMLESS, DRAWN HYDRAULIC AND PNEUMATIC SYSTEMS RECRYSTALLIZED ALUMINUM-LITHIUM ALLOY 8090-T3 SHEET ALUMINUM ALLOY D357.0-T6 CASTING FOR AIRCRAFT STRUCTURAL APPLICATIONS WELD FILLER WIRE, TITANIUM ALLOY PH13-8Mo CRES BAR, FORGING STOCK, FORGINGS AND EXTRUSIONS WITH CONTROLLED FRACTURE TOUGHNESS TITANIUM ALLOY Ti-15V-3Cr-3Al-3Sn-DUCTING, PNEUMATIC SYSTEM DUCTS TITANIUM ALLOY BETA 21S STRIP AND SHEET RESIN BONDED LAMINATED SHIM STOCK Ti-6Al-2Sn-4Zr-2Mo-0.08Si HOT ISOSTATIC PRESSED CASTINGS COBALT ALLOY 6B, SHEET AND PLATE COBALT ALLOY 6B, BAR AND BILLET NICKEL-BASE ALLOY, NICKEL ALLOY 718 (UNS N07718), PNEUMATIC DUCTING SHOT PEENING MEDIA TITANIUM ALLOY 15V-3Cr-3Al-3Sn BAR PREMIUM GRADE TITANIUM ALLOY SHEET, 6Al-4V THICK SECTION TITANIUM 6AL-4V FORGED BLOCK BARS, FORGINGS, AND FORGING STOCK VACUUM INDUCTION MELTED - VACUUM ARC REMELTED (VIM - VAR) PH13-8Mo CRES COPPER-BERYLLIUM ALLOY BARS, RODS, AND MECHANICAL TUBING, 98Cu-1.9B e, (UNS C17200) SOLUTION TREATED ANDAGED COBALT-NICKEL ALLOY, HIGH STRENGTH, CORROSION AND HEAT RESISTANT WIRE AND BARS, UNS R30159 HIGH STRENGTH FATIGUE AND DAMAGE TOLERANT, STRESS CORROSION RESISTANT 7040 ALUMINUM ALLOY PLATE XD 15 NW CORROSION RESISTANT STEEL BAR TITANIUM 5Al-5V-5Mo-3Cr DIE FORGINGS AND BARS LASER DEPOSITED TI-6AL-4V PREFORMS, STRESS-RELIEVED AND AGED FORMABLE 2024-T4 BARE AND CLAD SHEET 12Cr-11Ni-1.7Ti-1Mo CORROSION RESISTANT STEEL BAR, WIRE, FORGINGS, AND FORGING STOCK (UNS S46500) HIGH FORMABILITY DRAWN ALUMINUM TUBING 6AL-4V TITANIUM ALLOY BETA FORGED DIE FORGINGS ALUMINUM ALLOY FORGINGS, THICK SECTION, HIGH STRENGTH, HIGH FRACTURE TOUGHNESS, STRESS CORROSION RESISTANT HIGH STRENGTH 7136 ALUMINUM ALLOY EXTRUSIONS 5AL-5V-5Mo-3Cr TITANIUM ALLOY EXTRUSION, BETA ANNEALED, SLOW COOLED AND AGED (BASCA-160) CONDITION ALUMINUM LITHIUM 2099 T83 ALLOY EXTRUSIONS TITANIUM 6AL-4V ANNEALED OR CREEP FLATTENED PLATE HIGH STRENGTH, DAMAGE TOLERANT, CORROSION RESISTANT 7XXX ALUMINUM ALLOY PLATE GENERAL PURPOSE, RIGID, FIRE RETARDED GLASS FABRIC REINFORCED PLASTIC SHEETING LAMINATED SIGHTING DOMES FLAT LAMINATED ACRYLIC SHEET LAMINATED PLASTIC AIR DUCTS FLEXIBLE AND SEMI-RIGID LAMINATED FABRIC AIRDUCTS VAPOR-PERMEABLE NEOPRENE-COATED NYLON HIGH TEMPERATURE AIR DUCT INSULATION NON SELF-SEALING FUEL CELL BACKING BOARD PLASTIC TUBING FOR WATER LINES LAMINATED PLASTIC SHEET - POST FORMING GRADE RIGID LOW-PRESSURE LAMINATED PLASTIC SHEET BACKING BOARD FOR FUEL CELL SUPPORT B-47 CANOPY LIQUID AROMATIC POLYAMINE HARDENER FOR EPOXY RESINS LIQUID EPOXY RESIN, MEDIUM VISCOSITY FLEXIBLE & SEMIRIGID AIR DUCTS, AND FLEXIBLE COUPLING FOR RIGID DUCTS FLAME RETARDANT TREATED COTTON FABRIC SPECIFICATION FOR FABRIC, IMPREGNATED LIGHT WEIGHT, HIGH STRENGTH, SYNTHETIC FIBER LAMINATED PLASTIC SHEET, METAL CLAD SILICONE RUBBER COATED GLASS FABRIC VINYL, LAMINATED FOR INTERIOR OF COMMERCIAL AIRCRAFT NON-SELF SEALING FUEL CELL FLEXIBLE BACKING BOARD SYNTHETIC FABRIC VAPOR PERMEABLE AIRCRAFT FLOOR COVERING LIQUID METHYL NADIC ANHYDRIDE CURING AGENT FOR EPOXY RESINS STRUCTURAL FOAM-IN-PLACE ADHESIVE PARACHUTE PACK NYLON WATER REPELLENT TREATED METAL CLAD FLEXIBLE LAMINATE SYNTHETIC FABRIC, FLAME RESISTANT, COATED STRETCHED ACRYLIC PLASTICS STYRENE COPOLYMER SHEET AIRCRAFT CARPET AND UNDERLAY MATERIALS ACOUSTICAL INSULATION - FLEXIBLE POLYURETHANE FOAM FOAM-URETHANE, RIGID FLUOROCARBON-BLOWN FLEXIBLE URETHANE FOAM FLEXIBLE POTTING COMPOUNDS, ELECTRICAL EPOXY COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS VIBRIN 135 (TRIALLYL CYANURATE MODIFIED) POLYESTER RESIN REINFORCED PLASTIC SHEEING FOR SANDWICH CONSTRUCTION POLYVINYL CHLORIDE PLASTISOLS, CAST AND MOLDED TAMPER-PROOF PUTTY PRE-IMPREGNATED REINFORCEMENTS, POLYESTER, FIRE RESISTANT, GENERAL PURPOSE COATED FABRIC, HIGH MASS, FLEXIBLE THERMAL-ACOUSTICAL FIBERGLASS INSULATION FIRE RESISTANT, POLYESTER REIN PREIMPREGNATED OPEN WEAVE GLASS FABRIC FOR GENERAL PURPOSE USE MOLDED THERMAL INSULATION FOR MISSILE APPLICATION SHOCK ABSORBING FLEXIBLE POLYETHER URETHANE FOAM STRUCTURAL LOW PRESSURE LAMINATED EPOXY SHEETING, AND PARTS, SELF-EXTINGUISHING LAMINATED THERMOSETTING PLASTIC SHEETING, PAPER BASE GLASS FABRIC, PREIMPREGNATED, SELF- EXTINGUISHING EPOXY COATED SYNTHETIC FABRIC RIGID URETHANE FOAM AIR DUCTS GLASS FIBER-REINFORCED FIRE RESISTANT PLASTIC AIR DUCTS HIGH TEMPERATURE RESISTANT PHENOLIC RESIN PREIMPREGNATED GLASS FABRIC AIRCRAFT DRAPERY AND CURTAIN MATERIALS - SELF EXTINGUISHING AIRCRAFT UPHOLSTERY FABRICS, SELF-EXTINGUISHING FOAM - URETHANE, FLEXIBLE DECORATIVE VINYL COATED FABRICS - SELF-EXTINGUISHING

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010

BMS numbers with description

BMS8-63 BMS8-64 BMS8-65 BMS8-66 BMS8-67 BMS8-68 BMS8-69 BMS8-70 BMS8-71 BMS8-72 BMS8-73 BMS8-74 BMS8-75 BMS8-76 BMS8-77 BMS8-78 BMS8-79 BMS8-80 BMS8-81 BMS8-83 BMS8-84 BMS8-85 BMS8-86 BMS8-87 BMS8-89 BMS8-90 BMS8-91 BMS8-92 BMS8-95 BMS8-96 BMS8-98 BMS8-99 BMS8-100 BMS8-101 BMS8-103 BMS8-104 BMS8-106 BMS8-109 BMS8-110 BMS8-113 BMS8-114 BMS8-115 BMS8-116 BMS8-117 BMS8-118 BMS8-120 BMS8-121 BMS8-122 BMS8-124 BMS8-125 BMS8-126 BMS8-129 BMS8-132 BMS8-133 BMS8-135 BMS8-137 BMS8-139 BMS8-141 BMS8-142 BMS8-143 BMS8-144 BMS8-145 BMS8-150 BMS8-151 BMS8-154 BMS8-163 BMS8-164 BMS8-168 BMS8-169 BMS8-175 BMS8-176 BMS8-177 BMS8-178 BMS8-185 BMS8-187 BMS8-190 BMS8-191 BMS8-192 BMS8-193 BMS8-195 BMS8-196 BMS8-197 BMS8-199 BMS8-201 BMS8-202 BMS8-203 BMS8-205 BMS8-206 BMS8-207 BMS8-208 BMS8-209 BMS8-212 BMS8-213 BMS8-214 BMS8-215 BMS8-216 BMS8-218 BMS8-219 BMS8-221 BMS8-222 BMS8-223 BMS8-224 BMS8-225 BMS8-226 BMS8-236 BMS8-237 BMS8-240 BMS8-242 BMS8-245 BMS8-246 BMS8-247 BMS8-250 BMS8-251 BMS8-253 BMS8-254 BMS8-255 BMS8-256 BMS8-258 BMS8-260 BMS8-262 BMS8-263 BMS8-264 BMS8-267 BMS8-268 BMS8-269 BMS8-270 BMS8-271 BMS8-273 BMS8-274 BMS8-276

Página 5 de 7

FOAM-URETHANE, RIGID CLOSED CELL, FOAM-IN-PLACE FABRIC, FLOW RESISTANT, ACOUSTIC T.A.C. MODIFIED POLYESTER LAMINATING RESIN AND T.A.C. MODIFIED POLYESTER IMPREGNATED GLASS FABRIC GLASS, MONOLITHIC AND LAMINATED AIRCRAFT GLAZING ASSEMBLIES GLASS FABRIC PREIMPREGNATED, AUTOCLAVE MOLDING GRADE HIGH TEMPERATURE (400 F), FLEXIBLE, ELECTRICAL SEALING AND POTTING COMPOUND ISULATIVE COATING COMPOUND FOR ELECTRONIC ASSEMBLIES RESIN BONDED CORK ABLATIVE INSULATION MATERIAL TFE - FLUOROCARBON RESIN MOLDING AND EXTRUSION MATERIALS THERMOSETTING REINFORCED PHENOLIC RESIN MOLDING COMPOUND FOAM, CLOSED CELL (FOAM-IN-PLACE) GLASS FABRIC, PREIMPREGNATED, SELF-EXTINGUISHING EPOXY RESIN FLEXIBLE CABLE MOLDING COMPOUND POLYVINYL CHLORIDE CABLE JACKETING GLASS FILLED POLYAMIDE (NYLON) MOLDING COMPOUND AND PARTS EPOXY POLYAMIDE ABLATIVE, INSULATION MATERIAL GLASS FABRIC PREIMPREGNATED EPOXY RESIN LOW TEMPERATURE CURING FIRE RESISTANT, POLYESTER RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE POLYURETHANE POTTING - MOLDING COMPOUND, ELECTRIC CABLE FLEXIBLE, PLASTIC HOSE FORMED THERMAL-ACOUSTICAL INSULATION GLASS FABRIC HONEYCOMB CORE PLASTIC, ABS SHEET, FLAME RESISTANT AIRCRAFT UPHOLSTERY LEATHER, GENUINE AND ARTIFICIAL POLYVINYL CHLORIDE, POLYVINYL FLUORIDE AND POLYETHYLENE TEREPHTHALATE LAMINATES AND POLYVINYL CHLORIDE UNSUPPORTED SHEET MICROWAVE DIELECTRIC MATERIAL POLYESTER-ALUMINUM LAMINATE TAPE FLEXIBLE, FUEL RESISTANT ELECTRICAL POTTING COMPOUND FABRIC , FLAME RESISTANT , HYPALON COATED FOAM - RIGID POLYURETHANE POLYVINYL FLUORIDE FILM PLASTIC, ABS SHEET, FOR ELECTRONIC USAGE RIGID, HIGH IMPACT-FIRE RESISTANT GLASS REINFORCED EPOXY SHEETING ADHESIVE FILM FOR GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES TROWELABLE CORK, ABLATIVE INSULATION MATERIAL AIR DUCT INSULATION, NONCORROSIVE TO STAINLESS STEEL REINFORCED POLYTETRAFLUOROETHYLENE (TFE) POLYURETHANE DIELECTRIC ENCAPSULANTS PLASTIC SHEET, LAMINATED, THERMO-SETTING, PAPER BASE, PHENOLIC-RESIN COMMERICAL QUALITY STRUCTURAL POLYURETHANE FOAM Glass Roving Reinforced Epoxy Resin Panels POLYMER COATED FABRIC - FLAME RESISTANT EMBEDDING COMPOUND FOR ELECTRONIC ASSEMBLIES GLASS FABRIC PREIMPREGNATED, EPOXY RESIN GLASS FABRIC, PREIMPREGNATED, B-STAGED EPOXY RESIN FOR ELECTRONIC LAMINATES LAMINATED, COPPER CLAD GLASS EPOXY (FOR PRINTED-WIRING BOARDS) POLYTETRAFLUORETHYLENE PARTS AND STOCK SHAPES HONEYCOMB CORE-SPLICING FOAM MATERIAL NONMETALLIC HONEYCOMB CORE REINFORCED PLASTICS HONEYCOMB CORE FOR CONTINUOUS ELEVATED TEMPERATURE SERVICE POLYIMIDE STRUCTURAL FOAM FOR ELEVATED TEMPERATURE (400-500F) SERVICE HIGH TEMPERATURE PHENOLIC RESIN PREIMPREGNATED GLASS FABRIC FIRE RESISTANT EPOXY RESIN PREIMPREGNATED GLASS FABRICS FOR GENERAL PURPOSE USE FLAME RETARDANT RIGID URETHANE FOAMS POLYCARBONATE MOLDING COMPOUNDS, STOCK AND MOLDED SHAPES FLEXIBLE POLYVINYL CHLORIDE EXTRUSIONS AND MOLDED PARTS GLASS FABRIC PREIMPREGNATED HIGH-TEMPERATURE-RESISTANCE EPOXY RESIN AIRCRAFT CABIN WINDOW SHADE MATERIALS INSULATION COVERING, SELF-EXTINGUISHING EPOXY PREIMPREGNATED ARAMID PAPER AND GLASS FABRIC FOR INTERIOR DECORATIVE LAMINATES POLYIMIDE RESIN IMPREGNATED STRUCTURAL FIBERGLASS FABRIC HIGH TEMPERATURE RESISTANT EPOXY ADHESIVE FILM GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES RIGID PVC FOAM CORE EPOXY PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANELS AND LAMINATES, AND ELECTRICAL ISOLATION HIGH STRENGTH GLASS FABRIC PREIMPREGNATED, HIGH TEMPERATURE RESISTANT, EPOXY RESIN RESIN, POLYESTER, LOW PRESSURE MOLING, SELF-EXTINGUISHING EPOXY RESIN PREIMPREGNATED NONWOVEN S-GLASS FIBER MATERIALS EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 250F (121C) CURE GLASS FABRIC PREIMPREGNATED EPOXY RESIN, VACUUM BAG PROCESS ACRYLIC-POLYVINYLCHLORIDE SHEETS RESIN FILMS FOR BACKCOATING TEXTILES GLASS FABRIC REINFORCEMENT FOR HIGH STRENGTH PLASTIC LAMINATE PRODUCTS FOAM SANDWICH COMPOSITE FOR USE IN CARGO LINER APPLICATIONS RIGID GLASS FIBER REINFORCED PLASTIC LAMINATE, ABRASIVE RESISTANT SURFACE ONE SIDE SYNTACTIC FOAM, EPOXY COATED - HOLLOW GLASS MICROSPHERES, FOR ELECTRONIC APPLICATIONS HIGH THERMAL CONDUCTIVITY EPOXY COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS HIGH MODULUS EPOXY RESIN SYSTEM NONMETALLIC HONEYCOMB-GLASS FABRIC REINFORCED - MIRCO CELL SIZE AUXILIARY RESINS FOR USE WITH SINGLE STAGE SANDWICH PANELS HIGH TEMPERATURE RESISTANT ADHESIVE FILM FOR GLASS FABRIC REINFORCED PLASTIC SANDWICH ASSEMBLIES FOR ELECTRICAL APPLICATIONS EPOXY RESIN PREIMPREGNATED NON-WOVEN E-GLASS FIBER MATERIALS SHEET MOLDING COMPOUND, POLYESTER FIBERGLASS, SELF EXTINGUISHING MAT, FIBROUS GLASS FIBERGLASS RESIN EPOXY-UNIDIRECTIONAL GLASS LAMINATES EPOXY PRE-IMPREGNATED UNIDIRECTIONAL GRAPHITE POLYETHER-POLYURETHANE INJECTION MOLDING MATERIAL FOR ELECTRIC CABLE GLASS FABRIC REINFORCED EPOXY PREPREG FOR HIGH PRESSURE MOLDED LAMINATES RESIN, SEALING AND POTTING, FOR FLAME SPRAY APPLICATION EPOXY PREIMPREGNATED GLASS FABRIC - OVEN CURED POLYVINYLIDENE CHLORIDE EMULSION EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 350 F (177C) CURE HARDENER, AROMATIC POLYAMINE FOR EPOXY RESINS RESIN, EPOXY MEDIUM VISCOSITY EPOXY RESIN PREIMPREGNATED NONWOVEN GRAPHITE FIBERS EPOXY RESIN PREIMPREGNATED NON-WOVEN HIGH MODULUS GRAPHITE FIBERS ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN (350 F CURING) ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN (250F CURING) POLYETHERSULFONE THERMOPLASTIC, SHEET, INJECTION AND EXTRUSION RESINS AND EXTRUDED PROFILE SHAPES MODIFIED PHENOLIC PREIMPREGNATED GLASS FABRIC FOR AIRCRAFT INTERIOR SANDWICH PANELS CARGO LINER, GLASS REINFORCED, PHENOLIC RIGID, HIGH IMPACT, FIRE RESISTANT GLASS FABRICS, RESIN IMPREGNATED, FIRE RESISTANT FOR GENERAL PURPOSE USE POLYESTER SHEET MOLDING COMPOUND MODIFIED PHENOLIC PREIMPREGNATED GLASS FABRIC FOR INTERIOR SANDWICH PANEL AND LAMINATES FLATWEAVE FABRIC UPHOLSTERY CARPET DRAPERY AND CURTAIN MATERIAL NEEDLED FELT ADHESIVE FOR COMPOSITE BONDING (350F CURE) COATED, TRANSPARENT POLYCARBONATE MATERIALS GRAPHITE FIBER PREIMPREGNATED WITH EPOXY RESIN, UNDIRECTIONAL TAPE 350 DEG F CURE FABRIC, SILICONE COATED, FOR FLEXIBLE AIRDUCTS POLYCARBONATE THERMOPLASTIC SHEET, INJECTION MOLDING, EXTRUSION AND ROTOMOLDING RESIN POLYSULFONE THERMOPLASTIC, SHEET, AND INJECTION, EXTRUSION AND ROTOMOLDING RESIN TEXTURE RETENTION MATERIALS FOR FLEXIBLE DECORATIVE LAMINATES SILICONE DIELECTRIC ENCAPSULANTS EPOXY PREIMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS - 350 F (177 C CURE) EPOXY IMPREGNATED GRAPHITE WOVEN FABRICS - 275 F (135 C) CURE VACUUM BAG PROCESS ARAMID FABRICS, EPOXY RESIN IMPREGNATED, FOR INTERIOR SANDWICH PANELS AND LAMINATES CARGO LINER, "KEVLAR" REINFORCED THERMOSET KEVLAR* FABRIC, EPOXY RESIN IMPREGNATED, FOR INTERIOR DECORATIVE LAMINATES ARAMID FABRICS PREIMPREGNATED WITH EPOXY RESIN FOR VACUUM BAG PROCESS FORMABLE TEDLAR DECORATIVE ALUMINUM LAMINATE TEDLAR/THERMOPLASTIC SHEET LAMINATE POLYAMIDE-IMIDE THERMOPLASTIC, INJECTION MOLDING AND EXTRUSION RESINS POLYAMIDE (NYLON) INJECTION MOLDING AND ROTOMOLDING RESINS FOR INTERIOR APPLICATIONS SHEET MOLDING COMPOUND, PHENOLIC FIBERGLASS KEVLAR/PHENOLIC PREPREGS FOR INTERIOR CRUSHED CORE SANDWICH PANELS CARBON FIBER/PHENOLIC PREPREG FOR INTERIOR SANDWICH PANELS ADVANCED COMPOSITES - 350 F CURE TOUGHENED - EPOXY PREIMPREGNATED CARBON FIBER TAPES AND FABRICS

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010

BMS numbers with description

BMS8-278 BMS8-283 BMS8-285 BMS8-286 BMS8-289 BMS8-293 BMS8-294 BMS8-297 BMS8-297-1 BMS8-297-2 BMS8-297-3 BMS8-297-4 BMS8-297-5 BMS8-299 BMS8-300 BMS8-301 BMS8-302 BMS8-303 BMS8-304 BMS8-305 BMS8-306 BMS8-307 BMS8-308 BMS8-310 BMS8-317 BMS8-318 BMS8-319 BMS8-320 BMS8-321 BMS8-322 BMS8-323 BMS8-324 BMS8-325 BMS8-327 BMS8-328 BMS8-330 BMS8-331 BMS8-336 BMS8-338 BMS8-339 BMS8-341 BMS8-342 BMS8-343 BMS8-344 BMS8-346 BMS8-347 BMS8-349 BMS8-350 BMS8-352 BMS8-353 BMS8-356 BMS8-358 BMS8-360 BMS8-363 BMS8-370 BMS8-371 BMS8-372 BMS8-373 BMS8-374 BMS8-375 BMS8-377 BMS9-1 BMS9-2 BMS9-3 BMS9-8 BMS9-9 BMS9-11 BMS9-12 BMS9-16 BMS9-17 BMS9-19 BMS9-20 BMS9-22 BMS9-223 BMS10-1 BMS10-2 BMS10-3 BMS10-4 BMS10-5 BMS10-6 BMS10-8 BMS10-9 BMS10-10 BMS10-11 BMS10-13 BMS10-14 BMS10-15 BMS10-16 BMS10-17 BMS10-18 BMS10-19 BMS10-20 BMS10-21 BMS10-22 BMS10-23 BMS10-24 BMS10-26 BMS10-27 BMS10-28 BMS10-29 BMS10-30 BMS10-31 BMS10-32 BMS10-33 BMS10-34 BMS10-35 BMS10-36 BMS10-37 BMS10-38 BMS10-39 BMS10-40 BMS10-41 BMS10-43 BMS10-48 BMS10-49 BMS10-50 BMS10-51 BMS10-52 BMS10-53 BMS10-54 BMS10-55 BMS10-60 BMS10-61 BMS10-67 BMS10-68 BMS10-70 BMS10-72 BMS10-73 BMS10-78 BMS10-79

Página 6 de 7

ALUMINUM COATED GLASS FIBER CLOTH EPOXY RESIN PREIMPREGNATED FLEXIBLE FOAM SOUND DAMPING AND SEALING TAPE TEXTILE HOOK AND LOOP FASTENERS AIRCRAFT FLOOR MATS ALUMINUM FOIL/FABRIC PREPREG OR ADHESIVE FILM LAMINATE MATERIAL POLYETHERIMIDE BASED THERMOPLASTIC SHEET, INJECTION, EXTRUSION AND ROTOMOLDING EPOXY IMPREGNATED CARBON FIBER TAPES AND WOVEN FABRICS SUITABLE FOR LAMINATE STRUCTURE EPOXY PREIMPREGNATED CARBON TAPE AND WOVEN FABRIC FOR AIRCRAFT STRUCTURE, 350 F CURE EPOXY PREIMPREGNATED CARBON FIBER REINFORCEMENTS FOR STRUCTURAL PULTRUSIONS - 350 F (177 C) CURE EPOXY PREIMPREGNATED BIAS WOVEN CARBON REINFORCEMENT FOR USE ON AUTOMATED LAMINATING MACHINES EPOXY IMPREGNATED CARBON TAPE FOR AUTOMATED MACHINES - 350F (177C) CURE EPOXY RESIN - 350F CURE EPOXY PREIMPREGNATED WOVEN CARBON REINFORCEMENT FOR USE ON PULTRUSION URETHANE COMPOUNDS FOR THE EMBEDMENT OF ELECTRICAL AND ELECTRONIC COMPONENTS FLEXIBLE POLYIMIDE FOAM COMPOSITE STRUCTURAL REPAIR RESINGS TWO PARTS RANDOM CARBON FIBER MAT - DRY MAT AND IMPREGNATED WITH 250 F AND 350 F CURE EPOXY CONDUCTIVE CARBON FIBER FABRIC/EPOXY - 350 F CURE CONDUCTIVE CARBON FIBER, FABRIC/EPOXY, 250 F CURE SINGLE COMPONENT SILICONE DIELECRIC ENCAPSULANT BISMALEIMIDE ROVING FOR FILAMENT WINDING PEEK RESIN IMPREGNATED GRAPHITE TAPE PEEL PLY MATERIALS FOR SURFACE PREPARATION OF COMPOSITES NONWOVEN PREIMPREGNATED WITH EPOXY RESIN (250F CURING) POLYETHER ETHER KETONE (PEEK) THERMOPLASTIC INJECTION MOLDING RESIN POLYURETHANE THERMOPLASTIC EXTRUSION AND INJECTION MOLDING RESIN POLYETHERKETONEKETONE (PEKK) THERMOPLASTIC POLYVINYL FLUORIDE FILM/THERMOPLASTIC SHEET LAMINATE - MEETS 1990 HEAT RELEASE AND SMOKE EMISSION REQUIREMENTS FOR CABIN INTERIOR MATERIALS POLYETHERIMIDE BASED THERMOPLASTIC INJECTION MOLDING AND PROFILE EXTRUSION RESIN FOR CABIN INTERIOR APPLICATIONS EPOXY COMPOUNDS FOR THE EMBEDMENT OF MAGNETIC DEVICES POLYAMIDE (NYLON) INJECTION MOLDING AND EXTRUSION RESINS FOR EXTERIOR APPLICATIONS SYNTACTIC CORE LAMINATED, COPPER CLAD RESIN IMPREGNATED (FOR PRINTED-WIRING BOARDS) EPOXY SHEET MOLDING COMPOUND POLYPHENYLSULFONE BASED THERMOPLASTIC FLEXIBLE, HIGH TEMPERATURE INSULATION BLANKETS ADVANCED COMPOSITES - 350 F CURE EPOXY PREIMPREGNATED FIBERGLASS FABRICS EXPANDED METAL FOIL FOR LIGHTNING STRIKE PROTECTION OF COMPOSITE PARTS MOLDABLE PLASTIC SHIM THERMALLY CONDUCTIVE NONMETALLIC CARBON FIBER HONEYCOMB CORE SURFACING FILMS FOR COMPOSITES CARBON FIBER-REINFORCED PLASTIC (CFRP) HONEYCOMB CORE POLYMER COATED FABRIC, FLAME RESISTANT, FLEXIBLE CARGO LINER EPOXY MATERIAL SYSTEMS FOR RESIN TRANSFER MOLDED COMPOSITE PARTS MOISTURE BARRIER TAPE INSULATION BLANKETS WITH POLYIMIDE FILM FACINGS FOR HIGH TEMPERATURE USE FLEXIBLE HIGH TEMPERATURE INSULATION BLANKETS WITH WOVEN FABRIC COVERING INTEGRAL SKINNING FLEXIBLE URETHANE FOAM AND PAINT FOR MOLDED PRODUCTS MODIFIED SILICONE PREIMPREGNATED FABRIC REINFORCED THERMOPLASTIC LAMINATE POLYVINYLIDENE FLUORIDE (PVDF BASED FILM) THERMOPLASTIC FOAMS ADVANCED INSULATION COVERING, SELF-EXTINGUISHING PREPREGS FOR HIGH TEMPERATURE APPLICATIONS ADVANCED POLYMER COATED FABRIC - FLAME RESISTANT FLEXIBLE POLYVINYLIDENE FLUORIDE FOAM TEXTILE HOOK AND LOOP FASTENERS, FLAME PROPAGATION RESISTANT NEEDLED FELT, FLAME PROPAGATION RESISTANT COATED FABRIC, HIGH MASS, FLAME PROPAGATION RESISTANT EPOXY PREIMPREGNATED CARBON FIBER TAPE AND WOVEN FABRIC - 350 F (177 C) CURE-SELF ADHESIVE FOR HONEYCOMB STRUCTURE INSULATION COVERING, FLAME PROPAGATION RESISTANT HIGH TEMPERATURE MINERAL FIBER INSULATION FIBER GLASS PAPER FOR CRYOGENIC INSULATION GLASS FABRIC REINFORCEMENTS FOR LAMINATED PLASTIC PRODUCTS CARBON FIBER REINFORCEMENTS, YARN AND FABRIC CARBON REINFORCEMENTS, HIGH STRAIN FIBERS CARBON REINFORCEMENTS, BIAS WOVEN AND PLAIN WEAVE CONDUCTIVE CARBON FIBER REINFORCEMENT - YARN AND FABRIC BIAS CARBON FIBER FABRIC CARBON REINFORCEMENTS, HIGH STRENGTH AND INTERMEDIATE MODULUS FIBERS AND FABRICS CERAMIC FELT INSULATION INSULATION, HIGH TEMPERATURE LOW THERMAL CONDUCTIVITY FIBERS FOR RESIN INFUSED COMPOSITES BRAIDED PREFORMS AROMATIC FUEL RESISTANT PRIMER-SEALER COPPER PLATE DECALCOMANIAS EXTERIOR ALKYD ENAMELS FAST-DRY SEMI-GLOSS FINISH ALUMINUM HARD COATING PORCELAIN ENAMEL MARKINGS ON ALUMINUM ALLOYS THINNER, ZINC CHROMATE PRIMER SCREEN-APPLIED MASKING MATERIALS CHEMICAL AND SOLVENT RESISTANT FINISH PRIMER, ZINC CHROMATE, IN AEROSOL SPRAY APPLICATOR CHEMICALLY MILLED ALUMINUM ALLOY SURFACES LIGHT UNDERCOATING FINISH SYSTEM (B-52 AIRCRAFT) BATTERY ELECTROLYTE RESISTANT FINISH (AIR DRYING) ALKALINE REMOVABLE EXTERIOR PROTECTIVE COATING PRIMER, SYNTHETIC FLUID RESISTANT FINISH PEELABLE TEMPORARY PROTECTIVE COATINGS (INDOOR) CORROSION RESISTANT FINISH FOR INTEGRAL FUEL TANKS ANTI-STATIC COATINGS LUSTERLESS EPOXY FINISHES ENAMEL, QUICK DRYING CERAMIC PROTECTIVE COATING FOR HEAT TREATMENT OF TITANIUM ALLOYS PLASTIC FILM FOR MARKERS CORROSION PROTECTIVE COATING FOR INTERNAL FUEL TANKS HOT MELT STRIPPABLE COATINGS FOR SPECIAL USE FLUORESCENT PROTECTIVE COATING FOR ELECTRONIC COMPONENTS FLUID RESISTANT DECALS CHEMICALLY MILLED TITANIUM PARTS COLOR CHANGING PAINT CERAMIC HOT FORMING LUBRICANT LEAK-DETECTING SYSTEMS SEMI-GLOSS EPOXY FINISH NICKEL PLATING (ELECTRODEPOSITED) MASKANTS FOR CHEMICAL MILLING SOLVENT FOR HOT SPRAY APPLICATION OF MIL-S-4383 MATERIAL FUEL AND MOSITURE RESISTANT FINISH FOR FUEL TANKS CHEMICALLY MILLED STEEL PARTS ELECTROLESS NICKEL PLATING PRIMER COATING, QUICK DRYING ELECTROCHEMICALLY MACHINED FERROUS ALLOYS CHEMCIALLY MILLED MAGNESIUM PARTS ELECTROLESS NICKEL ON ALUMINUM CHLOROSULFONATED POLYETHYLENE COATING LIMITED OUTDOOR STRIPPABLE TEMPORARY PROTECTIVE COATINGS HIGH TEMPERATURE PRIMER DIELECTRIC SCREENING INKS INTERIOR DECORATIVE WATER EMULSION PAINTS PROTECTIVE ENAMEL VINYL LACQUER, LOW PIGMENT GLOSS BLACK THERMAL SPRAY POWDERS WELD-THROUGH PRIMER THIN, DENSE CHROMIUM PLATING EXTERIOR DECORATIVE PAINT SYSTEM SCREEN PRINTING INKS CLEAR BAKING ENAMEL URETHANE COMPATIBLE, CORROSION RESISTANT PRIMER

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010

BMS numbers with description

BMS10-82 BMS10-83 BMS10-85 BMS10-86 BMS10-90 BMS10-94 BMS10-97 BMS10-98 BMS10-100 BMS10-101 BMS10-102 BMS10-103 BMS10-107 BMS10-108 BMS10-109 BMS10-110 BMS10-112 BMS10-115 BMS10-117 BMS10-123 BMS11-1 BMS11-4 BMS11-5 BMS11-6 BMS11-7 BMS11-8 BMS11-9 BMS11-10 BMS11-11 BMS13-1 BMS13-2 BMS13-3 BMS13-4 BMS13-5 BMS13-6 BMS13-7 BMS13-8 BMS13-9 BMS13-10 BMS13-11 BMS13-12 BMS13-13 BMS13-14 BMS13-16 BMS13-18 BMS13-19 BMS13-21 BMS13-23 BMS13-24 BMS13-28 BMS13-29 BMS13-30 BMS13-31 BMS13-35 BMS13-36 BMS13-37 BMS13-38 BMS13-39 BMS13-40 BMS13-41 BMS13-42 BMS13-45 BMS13-46 BMS13-47 BMS13-48 BMS13-49 BMS13-51 BMS13-52 BMS13-53 BMS13-54 BMS13-55 BMS13-56 BMS13-58 BMS13-59 BMS13-60 BMS13-65 BMS13-67 BMS13-69 BMS13-71 BMS13-72 BMS14-2 BMS14-3 BMS14-4 BMS14-7 BMS15-3 BMS15-5 BMS15-6 BMS15-12 BMS15-13 BMS15-15 BMS20-1 BMS20-2 STB3-13 STB5-82 STB7-236 STB7-237 STB8-140 STB8-152 STB8-153 STB8-188 STB10-7 STB10-84

Página 7 de 7

LOW EMISSIVITY GOLD COATING INTERIOR DECORATIVE URETHANE PAINT SYSTEM ALUMINUM PIGMENTED COATING FOR FASTENERS TEFLON FILLED COATING THERMAL CONTROL COATING MASKS, SOLDERING URETHANE EXTERIOR COATINGS COLORED ANODIZED ALUMINUM FOR MANUFACTURE OF MARKERS FLEXIBLE CORROSION INHIBITING COATINGS URETHANE COATINGS FOR INTEGRAL FUEL TANKS FIRE RESISTANT INSULATIVE COATING SYSTEM NONCHROMATED PRIMER FOR COMPOSITES WATER BASED SCREEN PRINTING INKS MARKING TAPES AND ADHESIVE LABELS MARKING INKS, PAINTS, AND COATINGS INTERIOR DECORATIVE HEAT CURED POWDER COATING INORGANIC THERMAL CONTROL COATING PRESS-ON WALKWAY FILM FOR FLOOR PANELS FLAME RETARDANT COATING FOR INTERIORS NON-CHROMATED INTEGRAL FUEL TANK COATING FOR COMPOSITE, TITANIUM AND CRES SURFACES CLEANER, ALKALINE (PHOSPHO-SILICATE) CLEANER, EMULSION TYPE (CONCENTRATE) CLEANING SOLVENT, TWO STAGE TRICHLOROETHYLENE CLEANING SOLVENT, PRE-SEALING EMULSION CLEANER, SOLVENT-ALKALINE TYPE METHYL PROPYL KETONE STABILIZED LIMONENE CLEANER N-PROPYL BROMIDE (NPB) SOLVENT WIRE, ELECTRIC, INSULATED, COPPER 300-VOLT, 257°F CONDUCTOR TEMP. CABLE, ELECTRIC-HIGH TEMPERATURE - 125 C WIRE: ELECTRICAL, INSULATED, COPPER, 600-VOLTS, ELECTRICAL CIRCUITS WIRE, ELECTRIC, INSULATED, COPPER_ FUEL GAGE CIRCUITS WIRE, ELECTRICAL, INSULATED, COPPER, 600-VOLT, 212 F, CONDUCTOR TEMPERATURE CABLE: ELECTRIC, INSULATED, 600 VOLTS WIRE, ELECTRIC, INSULATED, ALUMINUM, 600-VOLT WIRE: ELECTRIC, INSULATED HIGH TEMPERATURE (650 F) AND FIRE RESISTANT WIRE: ELECTRICAL POLYMONOCHLOROTRIFLUOROETHYLENE INSULATED WIRE, ELECTRIC, INSULATED, HIGH TEMPERATURE WIRE, ELECTRIC, INSULATED INSTRUMENTATION WIRE, ELECTRICAL, INSULATED, COPPER, 600-Volt (RMS), 212°F CONDUCTOR TEMPERATURE, SKYDROL - 500A RESISTANT WIRE, ELECTRICAL, INSULATED, COPPER, 600-VOLTS, 212 CONDUCTOR TEMPERATURE, ELECTRONIC CIRCUITS CABLE, ELECTRIC, MULIT-CONDUCTOR, 600-VOLT, 100°C WIRE, ELECTRIC, POLYTETRAFLUOROETHYLENE INSULATED, SURFACE TREATED WIRE, ELECTRIC, INSULATED, COPPER, HI-TEMPERATURE, 400F, 600 VOLTS (RMS) CABLE: COAXIAL, SEMI-FLEXIBLE CABLE: RADIO-FREQUENCY, COAXIAL WIRE AND CALBE, THERMOCOUPLE, ISA TYPE K, POLYTETRAFLUOROETHYLENE INSULATED WIRE AND CABLE, ELECTRICAL INSTRUMENTATION, FLUOROCARBON INSULATED, COPPER AND THERMOCOUPLE WIRE, ELECTRIC, ABRASION RESISTANT, ECTRUDED TFE, 600 VOLT (RMS, 500 DEGREES F) NICKEL PLATED COPPER CONDUCTOR EXTRUDED WIRE ELECTRIC, (TFE) INSULATED, 1500 VOLT (RMS) 500F CONDUCTOR TEMPERATURE WIRE, ELECTRIC, INSULATED, HIGH STRENGTH CONDUCTOR, 600 VOLTS 212 DEGREES F (100 DEGREES C) MAXIMUM CONDUCTOR TEMPERATURE WIRE, ELECTRIC, ABRASION RESISTANT, EXTRUDED TFE, 600 VOLT (RMS) 260C, NICKEL COATED COPPER CONDUCTOR WIRE ELECTRIC POLYIMIDE INSULATED, ALUMINUM 600 VOLTS 177C WIRE: ELECTRIC, POLYIMIDE INSULATED COPPER, 600 VOLT, 400 DEG. F. WIRE: ELECTRIC, POLYIMIDE INSULATED COPPER ALLOY 600 VOLT, 400 DEG. F WIRE, ELECTRIC, GENERAL PURPOSE, INSULATED COPPER, 600 VOLTS (RMS), 135C WIRE, ELECTRIC, INSULATED COPPER, 600 VOLTS (RMS), 135C WIRE ELECTRIC, INSULATED ALUMINUM, 600 VOLT (RMS), 150C ELECTRICALLY CONDUCTIVE TAPE WIRE: ELECTRIC, POLYARYLENE INSULATED COPPER AND COPPER ALLOY, 600V (RMS) 150 C (302 F) ELECTRICALLY CONDUCTIVE GASKETS WIRE, ELECTRIC, INSULATED, WRAPPED WIRE TERMINATION TAPE, LABEL STOCK, WIRE AND BUNDLE IDENTIFICATION WIRE, ELECTRIC, EXTRUDED CROSS-LINKED ETHYLENETETRAFLUOROETHYLENE, (ETFE) 600 V (RMS) 150 C WIRE: ELECTRIC, ALKANE-IMIDE INSULATED COPPER AND COPPER ALLOY, 600V (RMS) 150C (302F) WIRE ELECTRIC POLYIMIDE INSULATED COPPER, AND COPPER ALLOY, 600 VOLT, 150 AND 200C SLEEVING, EXPANDABLE, BRAIDED MARKING FOIL, HOT STAMP LACING TAPE, FLAT BRAID WIRE, ELECTRIC, INSULATED THIN WALL FIRE RESISTANT, HIGH TEMPERATURE (260C) CABLE, ELECTRIC, COPPER AND COPPER ALLOY, FLAT - CONDUCTOR, 450 VOLT (RMS), 150C WIRE ELECTRIC, 600 VOLTS RMS, 260C, NICKEL COATED COPPER CONDUCTOR FIBER OPTIC CABLE WIRE ELECTRIC, ARC RESISTANT, 600 VOLTS RMS, ANNEALED COPPER, COPPER ALLOY AND ALUMINUM CONDUCTOR SILVER COATED CONDUCTOR, PTFE DIELECTRIC, DOUBLE BRAID, LIGHT WEIGHT, 50 OHMS, COAXIAL CABLE CABLE, ELECTRIC, INSULATED FIRE RESISTANT, HIGH TEMPERATURE (310C) HEAT SHRINKABLE IDENTIFICATION SLEEVES CABLE, FIBER OPTIC, MULTIMODE, GRADED INDEX CABLE, DATABUS, 100 OHMS DIELECTRIC MATERIAL, HIGH TEMPERATURE ZIRCONIUM OXIDE PROTECTIVE COATING, INORGANIC, HEAT, WEATHER AND OIL RESISTANT REFACTORY DIELECTRIC CASTABLE AND FINISHING MATERIAL RELEASE SHEET MATERIALS - NON-CONTAMINATION WIPER, ABSORBENT, PROCESS CLEANING COMPUTER MAGNETIC TAPE ALKALINE REMOVABLE TEMPORARY PROTECTIVE COATINGS AND COATING REMOVERS VACUUM BAGGING MATERIALS ELECTROSTATIC DISCHARGE PROTECTIVE BAGS AND FILM GENERAL REQUIREMENTS FOR ALUMINUM ALLOY EXTRUSIONS GENERAL REQUIREMENTS FOR ALUMINUM ALLOY SHEET AND PLATE HYDRAULIC FLUID, LOW TEMPERATURE, RUST PREVENTATIVE RUBBER, ABLATIVE SILICONE ALUMINUM FILLER METAL, BARE STEEL BAR, FORGING STOCK, AND RINGS, CORROSION RESISTANT, 15Cr-5Ni-4Cu, VACUUM ARC REMELTED CASTING RESIN MICROWAVE ENERGY ABSORBING LAMINATED, COPPER CLAD POLYTETRAFLUOROETHYLENE GLASS ELASTOMER - MICROWAVE ENERGY ABSORBING SILICONE CASTING RESIN STRIPPABLE, FLEXIBLE, ELECTRICAL TERMINAL COATING COMPOUND PRIMER, HIGH TEMPERATURE, MOISTURE RESISTANT COATING SYSTEM, RAIN EROSION & RADIATION THERMAL RESISTANT

Back to Misc Page

http://www.mtpinc-exporter.com/misc/boeing.htm

21/10/2010