Baseband RAN GSM Configuration Guide 2017 17Q4
February 9, 2023 | Author: Anonymous | Category: N/A
Short Description
Download Baseband RAN GSM Configuration Guide 2017 17Q4...
Description
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
1 (55)
No.
Checked
Date
Rev
2017-11-17
D
Reference
Baseband RAN GSM Configuration Guide 2017 (For Ericsson Internal Use Only)
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
2 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Contents
Figures 1 1.1 1.2 1.3 1.4 2 2.1 3 3.1 3.2 3.3 3.3.1 3.3 .1
4 Int Introd roduct uction ion... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........5 ....5 Scop Scope.. e..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ .......5 ...5 Au Autho thors. rs.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ........ ......... ........ .......5 ...5 Ch Chan ange ge Histo History. ry.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ......6 ..6 Do Docum cumen entt App Approv rovers ers... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ......6 ..6 Purp Purpos ose. e... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ...... ...... .....7 ..7 Ta Targe rgett Grou Groups ps... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........ ........ ......7 ..7 Base Baseba band nd RAN RAN GSM GSM Netw Networ ork k Ar Arch chit itec ectu ture re.. .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ....7 .7 Ove Overvi rview ew... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ......... ......... ........ ........ ........ ........ .......7 ...7 Ba Base seba band nd RBS... RBS...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ .....8 .8 Logic Logical al Model Model Overv Overview iew... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... .......8 ....8 New GSM MOM Structure Structure..... .......... .......... .......... .......... .......... .......... .......... .......... ............ .................... ..............8 .8
4 4.1 4.1.1 4.1 .1
Base Ba seba band nd Co igur urat atio n Pr Proc oces s... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ...... ...... ...... ...... ...... ...... ....9 .9 Ba Base seba band nd Conf Green Grenfig enfie field ldion Gene Ge neral raless. Proce Pro cess. ss.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....9 .9 Base Baseba band nd GSM Gree Greenfi nfiel eld d Config Configura uratio tion n Detaile Detailed d Process Process Usin Using g PCI Tool....................................................................................................9 4.2 Ba Base seba band nd Migrat Migration ion Gen Genera erall Proces Process.. s..... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........ ......10 ..10 4.2.1 4.2 .1 Base Baseba band nd GSM GSM Migrat Migration ion Con Config figura uratio tion n Detail Detailed ed Proce Process ss Using Using PC PCII Tool..................................................................................................10 4.2.2 4.2 .2 Migr Migratio ation n Sup Support port and Exceptio Exceptions.. ns....... .......... .......... .......... .......... .......... ............ ................... .............11 .11 4.2.2.1 Support............................ Support....................................................... ................................................................. ......................................11 11 4.2.2.2 Exceptions................... Exceptions.............................................. ....................................................... ....................................... .............. ...11 11 4.3 Pre Prereq requis uisite ites s for Migr Migrat ation ion... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ .........1 .....12 2 4.3.1 4.3 .1 OSS Require Requiremen ments... ts........ .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... ............12 .......12 4.4 Su Supp pport orted ed featu features res... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ .....12 .12 4.5 NU NUMRE MREQB QBPC. PC.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........12 ....12 4.6 4.7 4.8 4.8.1 4.8 .1 5 5.1 5.2 5.3 5.4 5.5 5.6 5.7 5.8 5.9 5.9
HO HOPTY PTYPE. PE.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ......... .......12 ..12 Lic Licen enses ses... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ......... ......... ........ ........13 ....13 BS BSC C Requir Requireme ements nts... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ .......13 ...13 Con Configu figurati ration on Change Changes.... s......... .......... .......... .......... .......... .......... .......... .......... .......... ............ ................... .............13 .13 Conf Config igur urat atio ion n Scri Script ptin ing. g... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ...... ...... ...... ...... ...... ...... ....13 .13 PC PCII Scrip Scripts ts fil files es for OSS-R OSS-RC.. C..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........ ........1 ....13 3 RB RBS S Summa Summary ry Scrip Scriptt (XML) (XML)... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ......13 ..13 Si Site te Bas Basic ic Scri Script pt (Ne (Netco tconf nf).. )..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ .......13 ...13 Si Site te Equ Equip ipmen mentt Script Script (Ne (Netco tconf) nf)... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... .....13 ..13 Tra Transp nsport ort Netwo Network rk (TN) (TN) Script Script (Ne (Netco tconf nf).. )..... ...... ...... ...... ....... ........ ........ ........ ........ ........ ........1 ....13 3 Ra Radio dio Net Netwo work rk (RN) (RN) Script Script (Ne (Netco tconf nf).. )..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ......... .........1 ....13 3 No Node deInf Info o (NetCo (NetConf) nf)... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ......14 ...14 Si SiteI teInst nstall allat ation ion (Ne (Netco tconf) nf)... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... .......1 ....14 4 Feat Featur ure e Ac Acti tiva vati tion on Scr Scrip iptt (MO (MO She Shell ll/N /Net etco conf nf via via L LM M MO).. MO)..... ...... ....... ........ .....1 .14 4
5.10 5.1 0 5.11 5.11
ARNE ARNE for for OSS-RC OSS-RC (Crea (Creatio tion n and Delet Deletio ion). n).... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ......14 ..14 Base Baseba band nd R503 R503 Exam Example ple Scri Script pt (Netc (Netcon onf). f).... ...... ...... ....... ........ ........ ........ ........ ........ ........ .....14 .14
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
3 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
6 7 7.1 7.2 7.3 7.4 7.5 7.5.1 7.5 .1 7.5.2 7.5 .2 7.5.3 7.5 .3 7.5.4 7.5 .4 8 8.1 8.1 8.1.1 8.1 .1 8.1.2 8.1 .2 9 9.1 9.1.1 9.1 .1 9.2 9.2.1 9.2 .1 9.2.2 9.2 .2 9.2.3 9.2 .3 9.2.4 9.2 .4 9.2.5 9.2 .5 10 10.1 10.1 10.1.1 10.1 .1 10.1.2 10.1 .2 10.1.3 10.1 .3 10.2 10.3 11 12
Date
Rev
2017-11-17
D
Reference
Depl Deploy oyme ment nt Pr Proc oces ess. s... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ....14 ..14 Rele Releas ase e Upda Update tes. s... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ...... ...... .....15 ..15 Ba Base seba band nd G17 G17A. A.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........15 ....15 Ba Base seba band nd 17.Q1 17.Q1... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... .......15 ...15 Ba Base seba band nd 17.Q2 17.Q2... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... .......15 ...15 Ba Base seba band nd 17.Q3 17.Q3... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... .......15 ...15 Ba Base seba band nd 17.Q4 17.Q4... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... .......15 ...15 Gree Greenfie nfield ld Input Input Files Files..... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......15 ..15 Gree Greenfie nfield ld Scripts.. Scripts....... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... ................ ....................16 .........16 G1 to G2 Migration Migration Inpu Inputt Files.... Files......... .......... .......... .......... .......... .......... .......... ............ ...................16 ............16 G1 to G2 Migration Migration Scri Scripts. pts...... .......... .......... .......... .......... .......... ................ ....................... .....................16 .........16 Appe Append ndix ix A. A... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ...... ...... ...... .....16 ..16 Base Baseba band nd GSM GSM Gre Green enfi fiel eld d and and Migr Migrat atio ion n Deta Detail iled ed Pro Proce cess sses es... ...... ...... ...16 16 Bas Baseba eband nd GSM Greenfie Greenfield ld Configu Configurati ration... on........ .......... .......... .......... .......... ............ .............17 ......17 Base Baseba band nd GSM and and Multi-N Multi-Nod odes es Migrat Migratio ion n Configu Configurat ratio ions. ns..... ........ ......... .....37 37 Appe Append ndix ix B. B... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... .... ..... ...... ...... ...... ...... ...... .....48 ..48 Ba Base seba band nd RAN RAN GSM RBS.. RBS..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........ ........ .......48 ...48 Main Main differe difference nces s betwee between n Baseb Baseban and d Units Units and DUG20 DUG20.... ........ ........ ........ .......4 ...48 8 Ne New w GSM GSM MOM MOM Struc Structur ture.. e..... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........4 ....49 9 GRA GRAT T MOM...... MOM........... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... ...............49 ..........49 CAT & TN MOM...... MOM........... .......... .......... .......... .......... .......... .......... .......... .............. ...................... ........................50 ...........50 MOs whi which ch are cha chang nged ed but but still still repres represen ented ted in in the BSC BSC.... ........ ........ .........5 .....51 1 New MOs in BSC..... BSC.......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .............52 ........52 Defi Definiti nition on of new new MO stru structur cture e in in BSC.. BSC....... .......... .......... .......... .......... .......... .......... .......... .........52 ....52 Appe Append ndix ix B..... B........ ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ......52 ..52 Licen Licenses ses and HW Activati Activation on Cod Codes es... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ .......52 ...52 Licenses Licenses for Baseba Baseband nd Nodes Nodes Handling Handling GRAN..... GRAN.......... .......... .......... .......... ............52 .......52 GRAN GRAN HWAC.... HWAC......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... ............... ...................... ..............53 ..53 Common Common HWACs.... HWACs......... .......... .......... .......... .......... .......... .......... .......... .......... ............ ................... .....................53 .........53 License License Change Changes s on BSC Side... Side........ .......... .......... .......... .......... .......... .......... .......... .......... .......... .........53 ....53 SAEs.... SAEs......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... .......... ............ ................... ........................ .............. 53 Glossa Glossary. ry.... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ....... ........ ........ ........ ........ ........54 ....54 Refer Referen ences ces... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ...... ........ ......... ........ ........ ........56 ....56
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
4 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
EUSRARO
Checked
Date
Rev
2017-11-17
D
Reference
Figures Figure 1: Baseband RAN GSM Network Topology.................................. Topology............................................................. ...................................... ....................... ................ .... 8 Figure 2: Baseband GSM PCI-Tool Greenfield Process Steps.................................................................. Steps....................................................................10 ..10 Figure 3: Baseband Baseband RAN GSM Migration Process Steps.................................................. Steps.............................................................................11 ...........................11 Figure 4: Change Sw Release................................................... Release............................................................................... ................................................................. ....................................... 15 Figure 5: PCI Tool Home Page................................................ Page........................................................................... .................................................................... ......................................... 17 Figure 6: Create a New Project Window................................ Window........................................................... ..................................................................... ............................................ 18 Figure 7: New Project Window................................................... Window.............................................................................. ...................................................... ....................................... ............ 19 Figure 8: Create New Nodes Window........................................ Window................................................................... .................................................................. ....................................... 20 Figure 9: New Nodes Window......................................................... Window.................................................................................... ...................................................... .................................. .......21 21 Figure 10: Template Skeletons................................. Skeletons............................................................ ...................................................... ................................................. ............................. ....... 22 Figure 11: Import Template Skeletons.......................................... Skeletons..................................................................... .............................................................. ..................................... 22 Figure 12: Locate Template Skeletons File.......................................................... File..................................................................................... ........................................ ............. 23 Figure 13: Verify Template Skeletons Skeletons SW Release............................. Release......................................................... ....................................... ....................... ................. ..... 24 Figure 14: Template Skeletons Window.................................. Window............................................................. ...................................................... ..........................................25 ...............25 Figure 15: Assign Templates................................ Templates........................................................... ...................................................... ................................................ ................................ ............. 26 Figure 16: Template Skeleton Window............................... Window.......................................................... .................................................................. .............................................. ....... 27 Figure 17: Assign Template Skeleton................................ Skeleton........................................................... ..................................................................... ............................................... ..... 28 Figure 18: Import Template Skeleton Window................................................ Window....................................................................................... ............................................. ...... 29 Figure 19: Template Instance Window..... Window................................ ...................................................... ...................................................... .............................................. ................... 29 Figure 20: Upload CIS Window................................ Window........................................................... ...................................................... ......................................................... ..............................30 30 Figure 21: Upload SSIS Window.................................. Window............................................................. ...................................................... .....................................................31 ..........................31 Figure 22: Template Skeletons and Template Instances Status..................................... Status....................................................... ............................. ........... 31 Figure 23: Script Actions Window - Validate Configuration................................... Configuration....................................................................... .......................................32 ...32 Figure 24: User-Specific User-Specific Project Settings Window.................................................... Window....................................................................................... ................................... 33 Figure 25: Script Actions Window (Script Generation).............................. Generation)......................................................... ...................................... ...................... .............35 ..35 Figure 26: Script Generation..................... Generation................................................. ....................................................... ...................................................... ........................................... .................. 36 Figure 27: Configuration Configuration Scripts........... Scripts...................................... ...................................................... ...................................................... ..................................................37 .......................37 Figure 28: Node Migration under under Utilities Section of the Nodes Window.......................................... Window..................................................... ........... 38 Figure 29: NODE UTILITIES Window........................................... Window...................................................................... .............................................................. ..................................... 38 Figure 30: Node Migration Window............................... Window.......................................................... ...................................................... .................................................... ......................... 39 Figure 31: Node Migration Window – Include GSM nodes.................................................... nodes...........................................................................41 .......................41 Figure 32: Node Migration Window – Multi-Node Migration.......................... Migration......................................................................... ............................................... 42 Figure 33: Node Migration Window – Nodes Candidates............................. Candidates........................................................ ................................................43 .....................43 Figure 34: Node Migration Window – Migrate Nodes........................................... Nodes...................................................................... ........................................ ............. 43 Figure 35: Node Migration Window Window – Select Nodes to be migrated (Left Window)........................... Window)...................................... ...........44 44 Figure 36: Node Migration Window – Select Nodes to be migrated (Right Window)....................................45 Window)....................................45 Figure 37: Name Definitions Window........ Window................................... ...................................................... ...................................................... ............................................. .................. 46 Figure 38: Name Definitions Definitions Window – New Nodes Definition and New MEId Names.......................... Names................................47 ......47 Figure 39: Nodes Window – Baseband Baseband Nodes Migrated.............................. Migrated......................................................... ................................................47 .....................47 Figure 40: Baseband Baseband Radio MOMs for GSM (GRAT MOM, CAT & TN MOM)............................................. MOM).............................................51 51
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
5 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
1
Date
Rev
2017-11-17
D
Reference
Introduction
This document provides a specific Baseband RAN GSM configuration for the network rollout process.
1.1
Scope
This document provides a specific Baseband RAN GSM engineering configuration guide for the network roll out process of Baseband RBS product. This document is to be kept internal to Ericsson, and should cover the following releases:
17A
17.Q1
17.Q2
17.Q3
17.Q4
Please see Reference [[1] [[1] for for details which provides a common part of the engineering configuration guide for Baseband RBS network rollout process. This document focuses on the deployment of a radio access network related to the Baseband RBS and associated infrastructure. Throughout this document, unless it is specifically stated, G2 or RBS means the Baseband. This document focuses on the deployment of radio access network related to the Baseband RBS for GSM and associated infrastructure.
1.2 David Wei
Authors
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
6 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
1.3
1.4
Date
Rev
2017-11-17
D
Reference
Change History Revision
Description
Authors
Date
PA1
Initial release
David Wei
2017-04-17
PA2
Update after review
David Wei
2017-05-24
PA3
Update after team review
David Wei
2017-06-05
A
Final
David Wei
2017-06-08
B
Final
David Wei
2017-06-26
PC1
Prelim. for 17.2.1, 17.Q3 Release.
David Wei
2017-09-12
PC2
Prelim. for 17.2.1, 17.Q3 Release Updates
David Wei
2017-09-18
PC3
Prelim. for 17.2.1, 17.Q3 Release Updates
David Wei
2017-09-19
C
Final
David Wei
2017-09-21
PD1
Prelim. for 17.2.3, 17.Q4 Release Updates
David Wei
2017-10-09
D
Final
David Wei
2017-11-15
Document Approvers Approver
Name
BNEW BL PRS NROP ENG
Rafael Rosario
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
7 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
2
Date
Rev
2017-11-17
D
Reference
Purpose
The purpose of this document is to describe the Baseband GSM configuration process and steps using PCI (Product Configuration & Integration Tool) to create the configuration files (or scripts). There are two types of configuration processe processess described in this document:
2.1
Greenfield
Migration from G1 to G2/Baseband
Target Groups
This document is targeted at those who need to know the end-to-end NRO engineering process, such as:
RAN Integration Engineers
Advanced Engineers
Solution Architects
3
Baseband RAN GSM Network Architecture
3.1
Overview
The Ericsson Baseband RAN network solution provides high speeds and reliability of mobile broadband service, which can be used in a dense urban environment, such as a sports stadium, a shopping mall, or a central train station, where a larger number of mobile users are concentrated in a relative small area. These Baseband RBS products enhance Macro cell solution.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
8 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 1: Baseband RAN GSM Network Topology
The above diagram shows GSM RAN that contains Baseband Radio Node, DU Radio Node, BSC/TRC and OSS. DU Radio Node is not in the scope of this document.
3.2
Baseband RBS Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
3.3
Logical Model Overview Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
3.3.1
New GSM MOM Structure
Please refer to Appendix A [ 8].
4
Baseband Configuration Process
4.1
Baseband Gr Greenfield General Process
The basic PCI workflow consists of:
Create a new Project
Customize Parameter Baseline
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
9 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Create Template Skeletons
Create Template Instances
Create a new Job (to work on Baseband nodes in which it resides)
Create new nodes with associated Templates
Create associated Nodal Scripts
Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
4. 4.1. 1.1 1
Base Baseba band nd GSM GSM Gre Green enfi fiel eld d Con Confi figu gura rati tion on De Deta tail iled ed Proc Proces ess s Usi Using ng PC PCII Too Tooll
The following diagram illustrates the Greenfield on-site configuration steps in PCI-Tool processes.
Figure 2: Baseband GSM PCI-Tool Greenfield Process Steps
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
10 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
EUSRARO
4.2
Checked
Date
Rev
2017-11-17
D
Reference
Baseband Migration General Process Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for general migration process to configure configure the ARN ARNE, E, RbsSumm RbsSummary/Site ary/Site Ins Installation tallation and S Site ite Basic ((Security Security & LDAP) to generate the complete set of the configuration scripts. scripts.
4. 4.2. 2.1 1
Base Baseba band nd GSM GSM Mig Migra rati tion on Conf Config igur urat atio ion nD Det etai aile led d Pro Proce cess ss Usin Using gP PCI CI Tool ool
The following diagram illustrates he configuration steps in PCI processes for DU/G1 node migration to Baseband node. Most of the steps are identical to Greenfield steps outlined before, except a few steps are unique to DU/G1 Migration scenario.
Figure 3: Baseband RAN GSM Migration Process Steps
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
11 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
4.2.2
Migration Support and Exceptions
4.2.2.1
Support
Reference
GSM Migration process supports the following:
4.2.2.2
Swapping down a DUG20 to Baseband unit in an RBS 6000, where Abis over IP is already implemented, Removal of SIU from the site after the swap, and synchronization for DUG20 is provided by SIU through E1 link.
Exceptions
The following options are not supported:
SIU/TCU with any special IP related features (TWAMP, IPSec etc.) SIU/TCU is required to remain active on site for routing purposes Migration from Abis over TDM to Abis over IP Migration of SIU/TCU to T605/T503 Synchronization Synchronizati on from other than NTP
4.3
Prerequisites for Migration
4.3.1
OSS Requirements
New Baseband will will have dire direct ct connection to the OSS. As it is manageable manageable from the the OSS, tthe he OSS should should be configured accordingly. It is recommended to have the same OSS for supporting BSC and Baseband unit too. Later if mixed mode is planned to be used in the Baseband-Based Node, then it is recommended to have the same OSS for supporting GSM and other technologies involved in mixed mode in Baseband units. Note:
Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
4.4
Supported features
List of supported and not supported feature can be found in document User Description, Baseband Radio Node for GSM [18]. [18]. The actual site, TG and cell configuration should be checked against the not supported features, and if they are activated then the necessary changes should be made prior to the DUG20 swap.
4.5
NUMREQBPC
NUMREQBPC NUMREQB PC parameter parameter cannot be set tto o SYSDEF SYSDEF in case of Baseband-Based N Node. ode.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
12 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
4.6
Date
Rev
2017-11-17
D
Reference
HOPTYPE
HOPTYPE is a new parameter for command RLCHC for determining the type of the hopping, which was specified as parameter of RXOTG before.
4.7
Licenses
Please refer to Appendix B [11 [ 11]. ].
4.8
BSC Requirements
4.8.1
Configuration Changes
Please refer to Baseband Integration – GSM BSC Procedure in Reference [2] for [2] for detail.
5
Configuration Scripting
5.1
PCI Scripts files for OSS-RC Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.2
RBS Summary Script (XML) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.3
Site Basic Script (Netconf) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.4
Site Equipment Script (Netconf) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.5
Transport Network (TN) Script (Netconf) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.6
Radio Network (RN) Script (Netconf) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.7
NodeInfo (NetConf) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.8
SiteInstallation (Netconf) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.9
Feature Activation Script (MO Shell/Netconf via LM MO) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
13 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
5.10
Checked
Date
Rev
2017-11-17
D
Reference
ARNE for OSS-RC (Creation and Deletion) Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
5.11 Common BaConfiguration seband R5Guide 03 Ein xaReference mple S[1] cr for ipt detail (Netconf) Please refer to Baseband [1] for
6
Deployment Process Please refer to Baseband Common Configuration Guide in Reference [1] for [1] for detail.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
14 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
7
Release Updates
7.1
Baseband G17A
Updates have been made to Baseband G17A.
7.2
Baseband 17.Q1
Updates have been made to Baseband 17.Q1.
7.3
Baseband 17.Q2
Updates have been made to Baseband 17.Q2.
7.4
Baseband 17.Q3
Updates have been made to Baseband 17.Q3.
7.5
Baseband 17.Q4
Updates have been made to Baseband 17.Q4.
Date
Rev
2017-11-17
D
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
15 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
8
Appendix A
PCI project and configuration scripts
8.1
17Q2
8.1.1
Greenfield
8.1.2
G1 to G2 Migration
8.2
17Q3
8.2.1
Greenfield
8.2.2
G1 to G2 Migration
Date
Rev
2017-11-17
D
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
16 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
8.3
17Q4
8.3.1
Greenfield
8.3.2
G1 to G2 Migration
9
Appendix B
9.1
Baseband GS GSM Gr Greenfield an and Migration De Detailed Pr Processes
This section describes the step-by-step GSM greenfield and migration processes using PCI. PCI tool can be accessed from the following link. https://tsesa https://tsesamw0086v.uat.sdt mw0086v.uat.sdt.ericsson.se/#! .ericsson.se/#!/home /home Note:
Please use Google Chrome or Firefox as Internet Explorer (IE) is not supported for the PCI tool.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
17 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 4: PCI Tool Home Page
9.1.1
Baseband GSM Greenfield Configuration 1.
Crea Create te a Pro Proje ject ct..
Click on “Deployment Projects” drop-down and select “Create”.
Click on “New Project” button. The following window will be displayed.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
18 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 5: Create a New Project Window
Enter the following i. Pro rojject ect N Naame ii. Projec Projectt Typ Typee (Custo (Customer mer or T Test est)) iii. Region Region (click (click on the d drop-d rop-down own and and select select the name name of the re region. gion.)) iv. Country Country (cl (click ick on th thee dropdrop-down down aand nd select select the countr country y customer customer is located.) v. Cust Customer omer ((clic click k on the drop-do drop-down wn and select select the the name o off the custome customer.) r.) vi. Mar Market ket (C (City ity,, Sta State/ te/Pro Provin vince) ce) Click on “Create” button. The following Project window will be displayed.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
19 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 6: New Project Window
2.
Crea Create te Ne New wN Nod odes es..
Click on “Project Actions” drop-down and select “Create Node”.
The following “CREATE NEW NODES” window will be displayed.
Enter the name of the Baseband Node (e.g. BB649) and select the SW Release for the node from the drop-down (e.g. 17.Q4), Click on “Create & Close” button if this is the only node needs to be created. If there are more nodes to be created, click on “Create Node” button again.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
20 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 7: Create New Nodes Window 3.
Sele Select ct New New Node Node..
Click on the box and next to the Node name just created. Go to the “Tools” tab on the right-hand side of the window under ‘SCRIPT ACTIONS” and “UTILITIES” SECTIONS
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
21 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 8: New Nodes Window
4.
Impo Import rt Tem Templ plat atee Skel Skelet eton onss
Click on “Configuration” under “Deployment Projects” Projects” on top of the window and select “Template Skeletons” from the drop-down. Click on the “Tools” tab on the right hand side of the window.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
22 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 9: Template Skeletons
Click on the the following icon next to “Skeleton(s)”
The “Import Skeletons” window will be displayed.
Figure 10: Import Template Skeletons
Click on the “Choose File” button, and locate the “Template Skeleton Skeletons” s” file for GSM as shown in the following example.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
23 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 11: Locate Template Skeletons File
5.
Once Template Skeletons are uploaded, they have to be assigned to the Node(s).
As Assi sign gn Tem Templ plat atee Skel Skelet eton onss
Prior to assigning Templates Skeletons, please make sure all Template Skeletons are in 17.Q4 release.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
24 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 12: Verify Template Skeletons SW Release
Type “17.Q4” under the Column Heading of “SW Release” so that only 17.Q4 skeletons wil be listed.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
25 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
EUSRARO
Checked
Date
Rev
2017-11-17
D
Figure 13: Template Skeletons Window
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
26 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Figure 14: Assign Templates
Click on “Apply” button.
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
27 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 15: Template Skeleton Window
Go to the right hand side of the window and click on the “Tools” tab.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
28 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 16: Assign Template Skeleton
Under “Skeleton(s)”, click on the following button to import the template skeleton.
Import Skeletons window will be displayed.
Locate the template skeleton file and click on “Upload” button to upload the template skeletons.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
29 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 17: Import Template Skeleton Window 6.
As Assi sign gn Tem Templ plat atee Inst Instan ance cess
Click on “Configuration” drop down to “Template Instance” and select “Browse”.
Select the “Instance name”
Figure 18: Template Instance Window
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
30 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO 7.
Date
Rev
2017-11-17
D
Reference
Upl ploa oad dC CIIS Fil Filee
Import CIS by clicking on the button to import CIS.
“Upload CIS” window will be displayed.
After choosing the CIS file, click on “Upload” button.
Figure 19: Upload CIS Window
8.
Upl ploa oad dS SS SIS Fi File
Go to the NODES window
Select the node(s)
Import SSIS by clicking on the button to import SSIS File.
After choosing the CIS file, click on “Upload” button.
Figure 20: Upload SSIS Window
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
31 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO 9.
Date
Rev
2017-11-17
D
Reference
Chec Check k Templa Template te S Skele keletons tons and Template Template Instances Instances
In the NODES window, select the node.
Click on the “Info” tab on the right-hand side of the window.
Figure 21: Template Skeletons and Template Instances Status 10. Validati Validation on Configur Configuration ation
Go to “Tools” tab on the right hand side of the window.
Select “Greenfield Baseband” from the drop-down.
Under Utilities, set the “Change SW Release” (e.g. 17.Q4).
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
32 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 22: Script Actions Window - Validate Configuration
Prior to Validate Configuration, under “Validate Configuration”, click on the setting button.
Click on the “Validation” tab and turn on/off on the scripts.
Click on “Apply” button on the right hand lower corner of the window.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
33 (55)
No.
Checked
Date
Rev
2017-11-17
D
Reference
Figure 23: User-Specific Project Settings Window
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
34 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Under “Validate Configuration”
Select the type of scripts to be generated (e.g. Greenfield Baseband) Baseband)..
Click on the following button to validate the configuration.
Click on the following button to validate the configuration.
Once the configuration is validated with no errors, proceed with generating the configuration scripts.
11. Scr Script ipt Ge Gener nerati ation on
Go to “Tools” tab on the right hand side of the window.
Select the type of scripts to be generated (e.g. Greenfield Baseband) Baseband)..
Click on the following button to generate the configuration scripts
Go to “Info” tab and check for the script. The script will be display on the right hand lower corner under CONFIGURATION( CONFIGURATION(S). S).
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
35 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
EUSRARO
Checked
Date
Rev
2017-11-17
D
Reference
Figure 24: Script Actions Window (Script Generation)
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
36 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
EUSRARO
Checked
Date
Rev
2017-11-17
D
Figure 25: Script Generation
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
37 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
In this case the scripts file name is displayed the following. “Greenfield Baseband 2017-09-13T21:10:57.533 GreenfieldBaseband_BB649_1 GreenfieldBa seband_BB649_1_17.Q3_BB649_Greenfi _17.Q3_BB649_Greenfield_BB_TMobil eld_BB_TMobil e_US_2017_09_13T21_10_56Z.zip”.
Double-click on the script file (zip format) and the scripts will be displayed.
Figure 26: Configuration Scripts
9.1.2
Base aseband GSM and Mult Multii-No Nod des Mig igra rati tio on Conf onfig igu urati ration ons s 1.
Crea Create te a migration migration proj project ect simi similar lar to creating creating greenfie greenfield ld project project as shown in section section 8.1.1 8.1.1..
2.
Under N NODE ODES S Migration Migration window, window, click click on the the follow following ing but button ton unde underr Node Mig Migrati ration on in UTILITIES.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
38 (55)
No.
Checked
Date
Rev
2017-11-17
D
Reference
Figure 27: Node Migration under Utilities Section of the Nodes Window
Figure 28: NODE UTILITIES Window
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
39 (55)
No.
Checked
Date
Rev
2017-11-17
D
Figure 29: Node Migration Window
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
40 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO 3.
Date
Rev
2017-11-17
D
Reference
Import the following attached files files for BSC P Printout, rintout, IDB P Printout, rintout, SSD P Printout rintout and SIU Printout for the G1 nodes. Note:
The attached files are for example only.
BSC Printout
IDB Printout
SSD Printout
SIU Printout
4.
Under NOD NODES ES Migra Migration tion window window,, click click on tthe he NE NEXT XT button. button.
5.
Turn off Mul Multi-N ti-Node ode Migration, Migration, Im Import port BS BSC C Printout, Printout, ID IDB B Printout, Printout, SS SSD D Print Printout out and SIU Printout.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
41 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 30: Node Migration Window – Include GSM nodes
6.
Turn on MultiMulti-Node Node Migr Migration ation and IImport mport RBS Printout. Printout.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
42 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 31: Node Migration Window – Multi-Node Migration 7.
Clic Click k on ““Next Next”” butt button. on. N Node ode Candida Candidates tes w will ill b bee dis display played. ed.
8.
Cha Change nge Targ Target et Softw Software are R Rele elease ase tto o “17. “17.Q4” Q4”..
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
43 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 32: Node Migration Window – Nodes Candidates 9.
Clic Click k on ““Next Next”” butt button. on. M Migra igrate te No Nodes des will will be be dis displaye played. d.
Figure 33: Node Migration Window – Migrate Nodes
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
44 (55)
No.
Checked
Date
Rev
2017-11-17
D
Reference
10. Select Select the nodes to be m migra igrated. ted.
Figure 34: Node Migration Window – Select Nodes to be migrated (Left Window)
11. Click on the ““Add” Add” button. The The nodes to be m migrated igrated will be moved from tthe he left-side of of the window to the right-hand side of the Node Migration window and select the nodes.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
EUSRARO
45 (55)
No.
Checked
Date
Rev
2017-11-17
D
Reference
Figure 35: Node Migration Window – Select Nodes to be migrated (Right Window)
12. Click on the ““Next” Next” button. Name Definitions Definitions window w will ill be displayed displayed and select the nodes.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
46 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 36: Name Definitions Window 13. New Nodes N Name ame After Mig Migration ration and New MEId for the nodes can be modi modified fied or changed in the Name Definition Windows. 14. Click Click on “Next” “Next” b butto utton. n.
Figure 37: Name Definitions Window – New Nodes Definition and New MEId Names
15. Click Click on “Finish” “Finish” Button. Button. 16. Go to N NOD ODES ES wind window. ow.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
47 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
Figure 38: Nodes Window – Baseband Nodes Migrated
17. Additional te templates mplates are assigned assigned to this node to add Site Basic, RbsSu RbsSummary, mmary, ARNE ARNE and transport related information. information. The attached files are Templates Templates (XML format), CIS and NDB for the node.
18. Once the nodes aare re migrated to Baseband, assign Template S Skeletons, keletons, Tem Template plate Instance Instancess by using the above attached file, validate the configurations and generate scripts. Please refer to Baseband Common Configuration Guide in Reference [1] [1] for for detail.
10
Appendix B
10.1
Baseband RAN GSM RBS
10.1.1
Mai Main dif diffe fere ren nces be betw twe een Ba Baseband band Unit its sa and nd DU DUG G20
It supports only IP transmission. No TDM capability capability will be required on the the sites and SI SIU/TCU U/TCU ca can n be removed from the site.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
48 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
10.2
Date
Rev
2017-11-17
D
Reference
IDB and OMT concept is no longer supported, instead a MOM structure should be used for BTS side configuration One Baseband unit can handle multiple cells and each cell requires one RXSTG, instead of 1 common RXOTG like in the case of DUG20 Instead of RXOTG structure, an RXSTG structure should be defined in the BSC, which is very different than RXOTG structure was RXSTRX and its subordinates are defined automatically by the system CHGR and RXSTG relation should be handled through RXTCI Start of RXSTG works the same way as before (RXESI, RXBLE) however the SUBORD parameter is no longer applicable. applicable. Baseband concept will use the SECTOR parameter to make L2TP connection between the Baseband unit and PGW, instead of PSTU/TGTransport (Note: the SECTOR and PSTU values must be unique on BSC level and one value shouldn’t be used for both parameters) Baseband unit has direct connection to OSS. Configuration should be handled from OSS, BTS related alarms are reported to OSS, not to BSC any more. ESB is not supported in case of Baseband-Based Node. All cables can be reused from configuration with DUG20 (expect the ESB cable), however different cable length may be needed as the port positions differ. NUMREQBPC NUMREQB PC cannot be sset et to SYS SYSDEF DEF value.
New GSM MOM Structure
The MOM structure is the new concept of defining and storing parameters in the Baseband unit. The MOM structure should be loaded directly onto the node. The full MOM structure including the new GRAT MOM can be found in User Guide, Manage Radio Network GSM [13]. [13]. The MOM structure needed for a Baseband unit used for GSM should contain the following:
10.2.1
GRAT MOM as GSM only related set of parameters, and
CAT & TN MOM structure which will be common for the supported radio technologies.
GRAT MOM
In order to handle Baseband GSM functionality, functionality, the following GRAT MOs need to be defined.
BtsFunction;
GsmSector;
GsmSector,AbisIp;
GsmSector,TRX;
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
49 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
10.2.2
Date
Rev
2017-11-17
D
Reference
CAT & TN MOM
In order to have the basic functionalities working, the following CAT MOs need to be defined. AntennaUnitGroup; AntennaUnitGr oup; AntennaUnitGroup,AntennaUn AntennaUnitGroup,AntennaUnit; it; AntennaUnitG AntennaUnitGroup,AntennaUnit roup,AntennaUnit,AntennaSubunit ,AntennaSubunit;; AntennaUnitGroup,AntennaUnit,AntennaSubunit, AntennaUnitGroup,AntennaUnit, AntennaSubunit,AuPort; AuPort; AntennaUnitGroup,RfBranch; AntennaUnitGroup,RfBranch; AntennaUnitGroup,CcBranch; AntennaUnitGroup,CcBranch; AntennaUnitGroup,AntennaNearUnit; AntennaUnitGroup,AntennaNear Unit; AntennaUnitGroup,AntennaNear AntennaUnitGroup,AntennaNearUnit,RetSubun Unit,RetSubunit; it; AntennaUnitGroup,AntennaNear AntennaUnitGr oup,AntennaNearUnit,TmaSubu Unit,TmaSubunit; nit; FieldReplaceableUnit; FieldReplac FieldReplaceableUnit; FieldReplaceableUnit,Ri eableUnit,RiPort; Port; FieldReplaceableUnit,Sync FieldReplaceableUnit,SyncPort; Port; FieldReplaceableUnit,T FieldReplaceableUnit,TnPort; nPort; FieldReplaceableUnit,RfPort; Equipment; Equipment,RiLink; Equipment,RiLink; Equipment,C Equipment,CcLink; cLink; EquipmentSupportFunction; NodeSupport; NodeSupport,Sec NodeSupport,SectorEquipmentF torEquipmentFunction; unction; NodeSup NodeSupport,MpCluste port,MpClusterHandling; rHandling; Transport; Transport,Sy Transport,Synchronization; nchronization; Transport,EthernetPort; Transport,EthernetPort; Transport,Rou Transport,Router; ter; Transport,Router,InterfaceI Transport,Router,InterfaceIPv4; Pv4; Transport,Router,RouteTabl Transport,Rout er,RouteTableIPv4Static eIPv4Static;; Transport,VlanPort; Transport,VlanPort; SystemFunctions; SystemFunctions; SystemFunct SystemFunctions,OamAcc ions,OamAccessPoint; essPoint;
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
50 (55)
No.
Date
Rev
2017-11-17
D
Reference
Figure 39: Baseband Radio MOMs for GSM (GRAT MOM, CAT & TN MOM)
10 10.2 .2.3 .3
MOs MOs whic which h are are chan change ged d but but sti till ll re repr pres esen ente ted d in the the BSC BSC
RXOTG will become RXSTG
RXOCF will become RXSCF
RXOTF will become RXSTF
RXOTRX, RXOTX, RXORX, RXOTS will became RXSTRX, RXSTX, RXSRX, RXSTS but all of them them will be defined defined and parameterized parameterized automatically automatically by the RBS RBS MOM
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
51 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
10.2.4
Rev
2017-11-17
D
Reference
New MOs in BSC
10.2.5
Date
RXSAT represents and configure the transport for Sector TG
Definition of of ne new MO MO st structure iin n BS BSC
Use the following commands to define and configure the MO structure in BSC:
RXMOI [14] for [14] for RXSTG
RXMOC [15] [15] for RXSTG, RXSTF and RXSAT
RXALC [16] [16] for for RXSTG
RXATC [17] [17] for for RXSAT
11
Appendix B
11.1
Licenses and HW Activation Codes
Currently all the licenses and HWACs are loaded onto APG of BSC. From the new Baseband node, the radio node related feature licenses and HW activation codes are loaded onto the RBS. The “Old” and released HWACs can be moved back to the common license pool. They cannot be exchanged to new ones, according to the current state. More information regarding HWACs and licenses can be found in document User Description, GSM RAN Handling of Softwar Softwaree Licenses, and Hardware Activation Codes [18] [18]..
11.1.1 .1.1
Lic ice ens nse es for Baseband band Nodes des Handli ndlin ng GR GRA AN
FAJ 121 4577 GSM MCPA Intelligent Power Management Baseband (CXC 401 2021) FAJ 121 4567 Mixed Mode Baseband GSM (CXC 401 2017) FAJ 121 4586 Mixed Mode Radio GSM for Baseband (CXC 401 2026 and CXC 401 1018)
11.1.2
GRAN HWAC
FAK 101 0076 GSM Cell Carrier (TRX) ERS (CXC 401 2037) FAK 101 0059 - Initial HWAC Baseband 5212 Utility Module - CXC 401 1956 FAK 101 0069 - Initial HWAC Baseband 5216 Utility Module - CXC 401 1961
11.1.3
Common HWACs
Power Licenses are no longer technology specific. The following power licenses can be ordered according to the current power configuration.
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES
52 (55)
Prepared (Subject resp)
No.
EKAMMOK
257/15443-2/LZA9055680
Approved (Document (Document resp)
Checked
EUSRARO
Date
Rev
2017-11-17
D
Reference
FAK 101 0050 Output power 20W to 40W CXC4010625 FAK 101 0051 Output power 40W to 60W CXC4010626 FAK 101 0052 Output power 60W to 80W CXC4011161 FAK FAK 101 101 0053 0054 Output Output power power 80W 100Wtoto100W 120WCXC4011162 CXC4011182 FAK 101 0055 Output power 120W to 140W CXC4011620 FAK 101 0056 Output power 140W to 160W CXC4011621
11.2
License Changes on BSC Side
The following licenses/HWACs licenses/HWACs are affected due to the migration from DUG to baseband Node as the relevant HWACs are loaded on Baseband side. These can be reduced after the migration.
FAJ 123 173 GSM MCPA Intelligent Power Management (FAT 102 0115/14 and FAT 102 0115/51) FAJ 121 0816 Mixed Mode Radio GSM (FAT 102 0115/11 and FAT 102 0115/52) FAK 101 0008 GSM Cell Carrier (TRX) (CXC 401 0898), FAK 101 0009 GSM Output Power 20W to 40W (CXC 401 0767) FAK 101 0010 GSM Output Power 40W to 60W (CXC 401 0769) FAK 101 0022 GSM Output Power 60W to 80W 9CXC 401 1179) FAK 101 0023 GSM Output Power 80W to 100W (CXC 401 1180) FAK 101 0024 GSM Output Power 100W to 120W (CXC 401 1181) FAK 101 0057 GSM Output Power 120W to 140W (CXC 401 1934) FAK 101 0058 GSM Output Power 140W to 160W (CXC 401 1935)
11.3
SA Es
For new Baseband, the RXSTG structure will use a new range of SAEs in BSC. To ensure that new RXSTG structure and also RXSTRX structures structures can be defined ,a group of new SAEs should be taken into consideration. List of the SAEs and more information can be found in document SIZE ALTERATION EVENTS IN BSC/TRC [4] [4] . .
12
Glossary
3GPP: 3rd Generation Partnership Project Abis: Interface between the Base Station Controller (BSC) and Base Transceiver Station (BTS) ARNE: Add Radio Network Element BB: Base-band BCM: Bulk Configuration Configuration Management BSC: Base Station Controller BSIM: Base Station Integration Manager
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO BTS: Base Transceiver Station CAT: Common Architecture Tier CIS: Common Input Sheets DU: Digital Unit DUG: Digital Unit GSM DUS: Digital Unit multi-Standard EDI: Engineer Data Input. ENM: Ericsson Network Manager GRAT: GSM Radio Access Technology GSM: Global System for Mobile Communications HOPTYPE: Frequency Hopping Type HWAC: HardWare Activation Code IDB: Installation Data Sheet IPSec: Internet Protocol Security LDAP: Light Directory Application Protocol LKF: License Key File MO: Managed Object MOM: Managed Object Model NDB: Network Data Book NHR: Next Hop Router NTP: Network Time Time Protocol NUMREQBPC: Number of Required BPC’s OMT: Operation and Maintenance Terminal OSS: Operation Support System OSS-RC: Operation Support System for Radio and Core PCB: Parameter Classificati Classification on Baseline PCI: Product Configuration and Integration
53 (55)
No.
Date
Rev
2017-11-17
D
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
54 (55)
No.
Checked
EUSRARO
Date
Rev
2017-11-17
D
RAN: Radio Access Network RBS: Radio Base Station RLCHC: Radio Control Cell, Configuration Frequency Hopping Data RN: Radio Network RNC: Radio Network Controller RXALC: Radio X-ceiver Administration, Alarm Coordination, Data Change RXATC: Radio X-ceiver Adminstration, Abis Path Threholds Data, Change RXMOC: Radio X-ceiver Administration, Managed Object Data, Change RXMOI: Radio X-ceiver Administration, Managed Object Initiate SAE: Size Alteration Events SC: Super Channel SCGR: Super Channel Group SCU: Support Control Unit SHU: Support Hub Unit SIU: Site Integration Unit SMRS: Software Management Repository Services with individual user accounts. SSD: Site Specific Data SSIS: Site Specific Input Sheet SSR: Site Survey Report SW: SoftWare TCU: Transmission Connection Unit TDM: Time Division Multiplexing TLS: Transport Layer Security TN: Transport Network TRX: Transceiver TWAMP: Two-Way Active Measurement Protocol
Reference
Internal Use Only
Ericsson Internal OPERAT. GUIDELINES Prepared (Subject resp)
55 (55)
No.
257/15443-2/LZA9055680
EKAMMOK Approved (Document (Document resp)
Checked
EUSRARO
13
Date
Rev
2017-11-17
D
Reference
References [1] Baseband Common Co mmon Configuration Configu ration Guide Guid e 2017 [2] Baseband Integratio Integration n – GSM BSC Procedure Pro cedure [3] Functional Specification Sp ecification,, BTS Logical Model Mod el G31 [4] SIZE ALTERATION EVENTS IN BSC/TRC 2/155 18-AXE 105 07 Uen AX3 ove r IP, Deactivate 38/154 3 8/154 31-APT 31- APT 210 09 Uen J [5] BSC, Packet Abis over [6] User Guide, Guide , Manage Integration In tegration [7] User Guide, Manage Man age Configuration Config uration Files [8] User Guide, Guid e, Manage Manag e Security [9] User Guide, Guide , Manage Hardware Ha rdware Equipment Equ ipment [10] User Guide, Manage Man age Network Synchroni Synchronization zation [11] User Guide, Guide , Manage Transport Tra nsport Network Ne twork [12] PCI-Tool Serve Serverr URL, http://pci.internal.ericsson.com/ http://pci.internal.ericsson.com/ Guide,, Manage Radio Ra dio Network GSM [13] User Guide [14] Radio X-receiver Administration, Admi nistration, Managed Mana ged Object, Initiate [15] Radio X-receiver X-receive r Administration, Administratio n, Managed Object Obje ct Data, Change [16] Radio X-receiver Administration, Admi nistration, Alarm Coordination Coord ination Data, Change [17] Radio X-receiver X-receive r Administration, Administratio n, Abis Path Thresholds Threshold s Data, Change [18] User Description, Descrip tion, Baseband Bas eband Node Nod e for GSM [19] User Description, Descriptio n, GSM RAN Handling of Software Licenses Licen ses and Hardware Activation Act ivation Codes [20] Radio X-receiver X-receive r Administration, Administratio n, TG to Channel Group, Initiate Init iate [21] Radio X-receiever X-receiev er Administration, Administrat ion, Managed Object Obj ect Data, Change
View more...
Comments
