Barudan BEAT 100 User Manual

 

Barudan BEAT 100 User Manual 102, 104, 106 Instructions

 

Basics

Operation Keys •

•

•

•

•

•

•

•

•

CTL + R : To erase all input letters/numbers To backup one step CTL + P: To CTL + G: Go to the beginning menu, STYLE  CTL + O: Move pantograph to origin ENT: Enter key. To accept. ke y. SPACE: Spacebar key SHIFT: To To get lower case letters. START: If input data is ready, to begin sewing. STOP: Stop sewing.

 

Frame move •

To manually move the pantograph. ARROW KEYS: To

Load a new design Loading from the Tape Reader or USB Reader.

1. The BEAT BEAT 100 can only run one stitch at a time from the reader. 2. If you just turned on the machine, it will ask PARAMETERS EXCHANGE?. 3. Press N and ENTER . 4. If you are not at the STYLE menu, then press CTL+G to get to the STYLE menu. 5. At the 1. STYLE menu, press 8 and ENTER . 6. At the 2. TAPE FORMAT menu, press 1 and ENTER . 7. At the 6. MIRROR IMAGE menu, press 0 and ENTER . INPUTREADER OK? PressDRIVE Y and .ENTER . 8. It It will will say say TAPE 9. 10. Press the START button to start sewing one stitch at a time from the reader.

Error codes

•

SPK ERROR : Make sure the tape or USB reader is ready for download before starting the load

 process.