AWWA - roovedfittings
Short Description
AWWA - roovedfittings...
Description
AWWA Grooved Products
AWWA Grooved Fittings
MATERIAL SPECIFICATIONS • Material - Ductile Iron per ASTM A536 Grade 65-45-12. • Interior lining - Cement l ined per ANSI/AWWA ANSI/AWWA C104/A21.4 sizes 3” single thickness and sizes 4”-36” double thickness and asphaltic seal coated. • Exterior coating – Rust inhibitor prime coat. • Fittings supplied with rigid radius grooves in accordance with ANSI/AWW ANSI/AWWA A C606. • Fittings conform to ANSI/AWW ANSI/AWWA A C110/A21.10 for center-to-end dimensions. Wall thickness per ANSI/AWW ANSI/AWWA A C153/A21.53 or ANSI/AWWA ANSI/AWWA C110/A21.10. • Fittings rated to 350 psi for sizes 3"-12", 250 psi for sizes 14"-24" and 150 psi for sizes 30"-36". • Sizes 3"-12" UL, ULC listed and Factory Mutual approved. • The Standard asphaltic seal coat applied applied on cement lining is UL/ANSI/NSF Standards 61 and 372 Approved. • Optional linings and coatings are available. • All ttings are UL/ANSI/NSF Standards 61 and 372 Approved.
APPROVED
A T A A
A
A
A A
PIPE SIZE
AE-6C 90º L.R. ELBOW
AE-1C 90º ELBOW
A
A
AE-2C 45º ELBOW
A
AE-3C AE-4C 22 1/2º ELBOW 11 1/4º ELBOW
AK-1C CAP
NOM. SIZE
ACTUAL PIPE SIZE
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
T
MAX. ALLOWABLE TAP
APPROX. WEIGHT (LBS)/(KG)
3 80
3.96 100.6
7.75 197
19 8.6
5.50 140
10 4.5
3.00 76
7 3.2
3.00 76
8 3.6
3.00 76
9 4.1
1.07 27
2 1/2
3 1.4
4 100
4.80 121.9
9.00 229
21 9.5
6.50 165
15 6.8
4.00 102
10 4.5
4.00 102
11 5.0
4.00 102
11 5.0
1.07 27
3
4 1.8
6 150
6.90 175.3
11.50 292
43 19.5
8.00 203
28 12.7
5.00 127
22 10.0
5.00 127
25 11.3
5.00 127
21 9.5
1.07 27
5
7 3.2
8 200
9.05 229.9
14.00 356
75 34.0
9.00 229
44 20.0
5.50 140
35 15.9
5.50 140
39 17.7
5.50 140
39 17.7
1.31 33
6
15 6.8
10 250
11.10 281.9
16.50 419
114 51.7
11.00 279
72 32.7
6.50 165
53 24.0
6.50 165
54 24.5
6.50 165
77 34.9
1.39 35
6
22 10.0
12 300
13.20 335.3
19.00 483
150 68.0
12.00 305
99 44.9
7.50 191
76 34.5
7.50 191
77 34.9
7.50 191
120 54.4
1.39 35
6
34 15.4
14 350
15.30 388.6
21.50 546
261 118.4
14.00 356
165 74.8
7.50 191
92 41.7
7.50 191
92 41.7
7.50 191
101 45.8
1.39 35
6
43 19.5
16 400
17.40 442.0
24.00 610
337 152.9
15.00 381
207 93.9
8.00 203
124 56.2
8.00 203
112 50.8
8.00 203
121 54.9
1.75 45
6
85 38.5
18 450
19.50 495.3
26.50 673
451 204.6
16.50 419
330 149.7
8.50 216
191 86.6
8.50 216
145 65.8
8.50 216
146 66.2
1.75 45
6
103 46.7
20 500
21.60 548.6
29.00 737
588 266.7
18.00 457
424 192.3
9.50 241
258 117.0
9.50 241
200 90.7
9.50 241
202 91.6
1.75 45
6
120 54.4
24 600
25.80 655.3
34.00 864
909 412.3
22.00 559
646 293.0
11.00 279
409 185.5
11.00 279
282 127.9
11.00 279
284 128.8
1.75 45
6
180 81.6
30 750
32.00 762.0
41.50 1054
2136 968.9
25.00 635
1145 519.4
15.00 381
1146 519.8
15.00 381
681 308.9
15.00 381
699 317.1
4.00 102
6
323 146.5
36 900
38.30 914.4
49.00 1245
3120 1415.2
28.00 711
1697 769.7
18.00 457
1262 572.4
18.00 457
975 442.3
18.00 457
1124 509.8
4.00 102
6
554 251.3
*All dimensions in black text are in inches except where indicated. *All dimensions in blue text (below number) are in millimeters except where indicated. GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 11
AWWA Grooved Products
AWWA Grooved Fittings
H A Y A
A
A B
Y
PIPE SIZE
AT-1C TEE
AY-1C TRUE WYE
AX-1C CROSS
A
AL-1C 45º LATERAL
NOM. SIZE
ACTUAL PIPE SIZE
A
APPROX. WEIGHT (LBS)/(KG)
A
B
APPROX. WEIGHT (LBS)/(KG)
H
APPROX. WEIGHT (LBS)/(KG)
Y
A
APPROX. WEIGHT (LBS)/(KG)
3 80
3.96 100.6
5.50 140
16 7.3
5.50 140
5.50 140
25 11.4
5.50 140
24 10.9
10.0 254
3.00 76
21 9.5
4 100
4.80 121.9
6.50 165
22 10.0
6.50 165
3.00 76
55 24.9
6.50 165
28 12.7
12.00 305
3.00 76
34 15.4
6 150
6.90 175.3
8.00 203
42 19.1
8.00 203
3.50 89
90 40.8
8.00 203
64 29.0
14.50 368
3.50 89
64 29.0
8 200
9.05 229.9
9.00 229
65 29.5
9.00 229
4.50 114
140 63.5
9.00 229
81 36.7
17.50 445
4.50 114
104 47.2
10 250
11.10 281.9
11.00 279
122 55.3
11.00 279
5.00 127
220 99.8
11.00 279
127 57.6
20.50 521
5.00 127
145 65.8
12 300
13.20 335.3
12.00 305
161 73.0
12.00 305
5.50 140
315 142.9
12.00 305
156 70.8
24.50 622
5.50 140
225 102.1
14 350
15.30 388.6
14.00 356
221 100.2
14.00 356
6.00 152
425 192.8
14.00 356
307 139.3
27.00 686
6.00 152
436 197.8
16 400
17.40 442
15.00 381
290 131.5
15.00 381
6.50 165
555 251.7
15.00 381
426 193.2
30.00 762
6.50 165
592 268.5
18 450
19.50 495.3
16.50 419
461 209.1
16.50 419
7.00 178
720 326.6
16.50 419
567 257.2
32.00 813
7.00 178
754 342.1
20 500
21.60 548.6
18.00 457
589 267.2
18.00 457
8.00 203
910 412.8
18.00 457
717 325.2
35.00 889
8.00 203
989 448.6
24 600
25.80 655.3
22.00 559
980 444.5
22.00 559
9.00 229
1135 514.8
22.00 559
1177 533.9
40.50 1029
9.00 229
1519 689.0
30 750
32.00 762.0
25.00 635
1505 682.6
25.00 635
10.00 254
1700 771.1
25.00 635
1366 619.6
49.00 1245
10.00 254
3280 1487.8
36 900
38.30 914.4
28.00 711
2175 986.6
28.00 711
15.25 387
2300 1043.3
28.00 711
1885 855.0
56.00 1422
15.25 387
5020 2277.0
PIPE SIZE H
H
J
AT-1C TEE
NOM. SIZE
H
J
APPROX. WEIGHT (LBS)/(KG)
4X4X6 100 X 100 X 150
8.00 203
8.00 203
47 21.3
6X6X8 150 X 150 X 200
8.00 203
8.00 203
79 35.8
8 X 8 X 10 200 X 200 X 250
11.00 279
11.00 279
164 74.4
10 X 10 X 12 250 X 250 X 300
12.00 305
12.00 305
226 102.5
*All dimensions in black text are in inches except where indicated. *All dimensions in blue text (below number) are in millimeters except where indicated. GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 12
AWWA Grooved Products
AWWA Grooved Fittings H
H J Y
J
J
A
Y
H
PIPE SIZE NOM. SIZE 4 100 6 150
8 200
10 250
12 300
14 350
16 400
18 450
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
3 80 3 80 4 100 3 80 4 100 6 150 4 100 6 150 8 200 4 100 6 150 8 200 10 250 6 150 8 200 10 250 12 300 6 150 8 200 10 250 12 300 14 350 6 150 8 200 10 250 12 300 14 350 16 400
AT-2C REDUCING TEE
AL-2C 45º REDUCING LATERAL
H
AX-2C REDUCING CROSS
H
J
APPROX. WEIGHT (LBS)/(KG)
Y
A
APPROX. WEIGHT (LBS)/(KG)
H
J
APPROX. WEIGHT (LBS)/(KG)
6.50 165 8.00 203 8.00 203 9.00 229 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 356 14.00 356 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 13.00 330 13.00 330 13.00 330 13.00 330 16.50 419 16.50 419
6.50 165 8.00 203 8.00 203 9.00 229 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 356 14.00 356 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 15.50 394 15.50 394 15.50 394 15.50 394 16.50 419 16.50 419
26 11.8 53 24.0 42 19.0 57 25.8 62 28.1 67 30.4 94 42.6 101 45.8 119 54.0 112 50.8 127 57.6 134 60.8 153 69.4 194 88.0 199 90.3 258 117.0 267 121.2 231 104.8 236 107.0 246 111.6 269 122.0 341 154.7 320 145.1 311 141.1 332 150.6 332 150.6 409 185.5 453 205.5
12.00 305 14.50 368 14.50 368 + + 17.50 445 17.50 445 20.50 521 20.50 521 20.50 521 24.50 622 24.50 622 24.50 622 24.50 622 27.00 686 27.00 686 27.00 686 27.00 686 30.00 762 30.00 762 30.00 762 30.00 762 30.00 762 + + + + 32.00 813 32.00 813 32.00 813 32.00 813
3.00 76.0 3.50 89.0 3.50 89.0 + + 4.50 114 4.50 114 5.00 127 5.00 127 5.00 127 5.50 140 5.50 140 5.50 140 5.50 140 6.00 152 6.00 152 6.00 152 6.00 152 6.50 165 6.50 165 6.50 165 6.50 165 6.50 165 + + + + 7.00 178 7.00 178 7.00 178 7.00 178
45 20.4 52 23.6 55 24.9 + + 88 39.9 93 42.1 120 54.4 124 56.2 133 60.3 175 79.4 180 81.6 186 84.4 196 88.9 330 149.7 346 156.9 540 244.9 625 283.5 570 258.5 585 265.4 630 285.8 650 294.8 692 313.9 + + + + 765 347.0 800 362.9 865 392.4 895 406.0
6.50 165 8.00 203 8.00 203 + + 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 346 14.00 356 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 + + 15.50 394 15.50 394 15.50 394 16.50 419 16.50 419
6.50 165 8.00 203 8.00 203 + + 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 346 14.00 356 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 + + 15.50 394 15.50 394 15.50 394 16.50 419 16.50 419
22 10.0 46 20.9 38 17.2 + + 76 34.5 82 37.2 120 54.5 114 51.7 123 56.8 174 78.9 130 59.0 139 63.1 154 69.9 215 97.5 221 100.2 235 106.6 244 110.7 266 120.7 276 125.2 291 132.0 305 138.3 280 127.0 + + 272 123.4 277 125.6 291 132.0 361 163.7 367 166.5
+ Contact Star Pipe Products for Details *All dimensions in black text are in inches except where indicated.
( Con’t )
*All dimensions in blue text (below number) are in millimeters except where indicated.
GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 13
AWWA Grooved Products
H
AWWA Grooved Fittings
H
J Y
J
J
A
Y
H
PIPE SIZE
AT-2C REDUCING TEE
24 600
30 750
36 900
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
6 150 8 200 10 250 12 300 14 350 16 400 18 450 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750
AX-2C REDUCING CROSS
H
J
APPROX. WEIGHT (LBS)/(KG)
Y
A
APPROX. WEIGHT (LBS)/(KG)
H
J
APPROX. WEIGHT (LBS)/(KG)
14.00 356 14.00 356 14.00 356 14.00 356 14.00 356 18.00 457 18.00 457 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 22.00 559 22.00 559 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 25.00 635 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 28.00 711
17.00 432 17.00 432 17.00 432 17.00 432 17.00 432 18.00 457 18.00 457 19.00 483 19.00 483 19.00 483 19.00 483 19.00 483 19.00 483 22.00 559 22.00 559 23.00 584 23.00 584 23.00 584 23.00 584 23.00 584 23.00 584 23.00 584 23.00 584 25.00 635 26.00 660 26.00 660 26.00 660 26.00 660 26.00 660 26.00 660 26.00 660 26.00 660 28.00 711
407 184.6 412 186.9 419 190.1 426 193.2 443 200.9 571 259.0 584 264.9 534 242.2 540 244.9 549 249.0 593 269.0 610 276.7 574 260.4 820 371.9 937 425.0 870 394.6 875 396.9 880 399.2 890 403.7 900 408.2 912 413.7 927 420.5 942 427.3 1475 669.0 1410 639.6 1415 641.8 1420 644.1 1425 646.4 1430 648.6 1435 650.9 1440 653.2 1445 655.4 2113 958.4
+ + + + + + 35.00 889 35.00 889 35.00 889 35.00 889 + + + + + + + + 40.50 1029 40.50 1029 40.50 1029 40.50 1029 + + + + + + 49.00 1245 49.00 1245 49.00 1245 49.00 1245 49.00 1245 49.00 1245 + + + + + + 54.00 1372 54.00 1372 54.00 1372 54.00 1372 54.00 1372 56.00 1422
+ + + + + + 8.00 203 8.00 203 8.00 203 8.00 203 + + + + + + + + 9.00 229 9.00 229 9.00 229 9.00 229 + + + + + + 10.00 254 10.00 254 10.00 254 10.00 254 10.00 254 10.00 254 + + + + + + 15.25 387 15.25 387 15.25 387 15.25 387 15.25 387 15.25 387
+ + + + + + 1000 453.6 1062 481.7 1105 501.2 1150 521.6 + + + + + + + + 1510 684.9 1580 716.7 871 395.1 1705 773.4 + + + + + + 2178 987.9 2208 1001.5 2248 1019.7 2294 1040.5 2339 1061.0 2451 1111.8 + + + + + + 3200 1451.5 3493 1584.4 3533 1602.5 3574 1621.1 3675 1666.5 3879 1759.5
+ + 17.00 432 17.00 432 17.00 432 17.00 432 18.00 457 18.00 457 + + + + + + 15.00 381 15.00 381 15.00 381 22.00 559 22.00 559 + + + + + + 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 + + + + 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 28.00 711
+ + 17.00 432 17.00 432 17.00 432 17.00 432 18.00 457 18.00 457 + + + + + + 19.00 483 19.00 483 19.00 483 22.00 559 22.00 559 + + + + + + 23.00 584 23.00 584 23.00 584 23.00 584 23.00 584 23.00 584 + + + + 26.00 66 26.00 66 26.00 66 26.00 66 26.00 66 26.00 66 28.00 711
+ + 343 155.6 343 155.6 357 161.9 327 148.3 458 207.7 469 212.7 + + + + + + 475 215.5 450 204.1 446 202.3 782 354.7 788 357.4 + + + + + + 888 402.8 853 386.9 843 382.4 839 380.6 835 378.7 1304 591.5 + + + + 1262 572.4 1222 554.3 1213 550.2 1204 546.1 1190 539.8 1163 527.5 1865 845.9
NOM. SIZE 20 500
AL-2C 45º REDUCING LATERAL
H
+ Contact Star Pipe Products for Details *All dimensions in black text are in inches except where indicated.
*All dimensions in blue text (below number) are in millimeters except where indicated. GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 14
AWWA Grooved Products
AWWA Grooved Fittings
A L
A
L
A
A
PIPE SIZE
AR-1C CONC. REDUCER
NOM. SIZE 4 100 6 150
8 200
10 250
12 300
14 350
16 400
18 450
X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X
3 80 3 80 4 100 3 80 4 100 6 150 4 100 6 150 8 200 4 100 6 150 8 200 10 250 6 150 8 200 10 250 12 300 6 150 8 200 10 250 12 300 14 350 8 200 10 250 12 300 14 350 16 400
AR-2C ECC. REDUCER
AE-5C 90º RED. EL
AE-7C 90º L.R. RED. EL
L
APPROX. WEIGHT (LBS)/(KG)
L
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
7.00 178 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 356 14.00 356 16.00 406 16.00 406 16.00 406 16.00 406 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 19.00 483 19.00 483 19.00 483 19.00 483 19.00 483
8 3.6 15 6.8 16 7.3 33 15.0 28 12.7 30 13.6 36 16.3 42 19.1 46 20.9 49 22.2 53 24.0 67 30.4 73 33.1 80 36.3 86 39.0 91 41.3 104 47.2 110 49.9 122 55.3 129 58.5 134 60.8 141 64.0 148 67.1 158 71.1 167 75.7 184 83.5 194 88.0
7.00 178 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 356 14.00 356 16.00 406 16.00 406 16.00 406 16.00 406 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 19.00 483 19.00 483 19.00 483 19.00 483 19.00 483
9 4.1 20 9.1 17 7.7 30 13.6 28 12.7 30 13.6 35 15.9 39 17.7 43 19.5 50 22.7 54 24.5 58 26.3 70 31.8 81 36.7 88 40.0 93 42.2 96 43.5 115 52.5 125 56.7 131 59.4 137 62.1 160 72.6 150 68.0 160 72.6 169 76.6 185 84.0 190 86.0
6.50 165 8.00 203 8.00 203 + + 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 12.00 305 12.00 305 12.00 305 12.00 305 14.00 356 14.00 356 14.00 356 14.00 356 15.00 381 15.00 381 15.00 381 15.00 381 15.00 381 16.50 419 16.50 419 16.50 419 16.50 419 16.50 419
17 7.7 25 11.3 27 12.2 + + 40 18.1 43 19.5 55 24.9 60 27.2 65 29.5 70 31.8 75 34.0 84 38.1 92 41.7 112 50.8 127 57.6 170 77.1 195 88.5 123 55.8 145 65.8 195 88.5 240 108.9 280 127.0 170 77.1 200 90.7 305 138.3 345 156.5 360 163.3
9.00 229 11.50 292 11.50 292 + + 14.00 356 14.00 356 16.50 419 16.50 419 16.50 419 + + 19.00 483 19.00 483 19.00 483 + + 21.50 546 21.50 546 21.50 546 + + 24.00 610 24.00 610 24.00 610 24.00 610 + + 26.50 673 26.50 673 26.50 673 26.50 673
20 8.1 36 16.3 40 18.1 + + 60 27.2 71 32.2 90 40.8 106 48.1 121 54.9 + + 143 64.9 163 73.9 188 85.3 + + 183 83.0 213 96.6 240 108.9 + + 228 103.4 263 119.3 295 133.8 290 131.5 + + 323 146.5 336 152.4 355 161.0 386 175.1
( Con’t )
+ Contact Star Pipe Products for Details *All dimensions in black text are in inches except where indicated.
*All dimensions in blue text (below number) are in millimeters except where indicated.
GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 15
AWWA Grooved Products
AWWA Grooved Fittings A L
A
L
A
A
PIPE SIZE NOM. SIZE 20 500
24 600
30 750
36 900
X8 X 200 X 10 X 250 X 12 X 300 X 14 X 350 X 16 X 400 X 18 X 450 X8 X 200 X 10 X 250 X 12 X 300 X 14 X 350 X 16 X 400 X 18 X 450 X 20 X 500 X6 X 150 X8 X 200 X 10 X 250 X 12 X 300 X 14 X 350 X 16 X 400 X 18 X 450 X 20 X 500 X 24 X 600 X8 X 200 X 10 X 250 X 12 X 300 X 14 X 350 X 16 X 400 X 18 X 450 X 20 X 500 X 24 X 600 X 30 X 750
AR-1C CONC. REDUCER
AR-2C ECC. REDUCER
AE-5C 90º RED. EL
AE-7C 90º L.R. RED. EL
L
APPROX. WEIGHT (LBS)/(KG)
L
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 + + + + 24.00 610 24.00 610 24.00 610 24.00 610 24.00 610 + + + + + + + + + + + + 30.00 762 30.00 762 30.00 762 + + + + + + + + 36.00 914 + + 36.00 914 36.00 914 36.00 914
173 78.5 182 82.6 201 91.2 205 93.0 215 97.5 266 120.7 + + + + 293 132.9 300 136.1 324 147.0 386 175.1 381 172.8 + + + + + + + + + + + + 500 226.8 535 242.7 689 312.5 + + + + + + + + 621 281.7 + + 1280 580.6 1370 621.4 1136 515.3
20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 20.00 508 + + + + 24.00 610 24.00 610 24.00 610 24.00 610 24.00 610 + + + + + + + + + + 30.00 762 30.00 762 30.00 762 30.00 762 + + + + + + + + + + + + 36.00 914 36.00 914 36.00 914
175 79.4 185 83.9 203 92.1 207 93.9 219 99.3 269 122.0 + + + + 295 133.8 305 138.3 330 149.7 384 174.2 385 174.6 + + + + + + + + + + 466 211.4 500 226.8 715 324.3 595 269.9 + + + + + + + + + + + + + + + + + +
+ + 18.00 457 18.00 457 18.00 457 18.00 457 18.00 457 + + + + 22.00 559 22.00 559 22.00 559 22.00 559 22.00 559 + + + + + + + + 25.00 635 25.00 635 25.00 635 25.00 635 25.00 635 + + + + + + + + + + + + + + + + + +
+ + 242 109.8 365 165.6 405 183.7 440 199.6 485 220.0 + + + + 525 238.1 535 242.7 545 247.2 565 256.3 598 271.2 + + + + + + + + 566 256.7 596 270.3 631 286.2 675 306.2 1170 530.7 + + + + + + + + + + + + + + + + + +
+ + 29.00 737 29.00 737 29.00 737 29.00 737 29.00 737 + + + + 34.00 864 34.00 864 34.00 864 34.00 864 34.00 864 + + + + + + + + + + 41.50 1054 41.50 1054 41.50 1054 41.50 1054 + + + + + + + + + + + + 49.00 1245 49.00 1245 49.00 1245
+ + 390 176.9 420 190.5 440 199.6 466 211.4 507 230.0 + + + + 620 281.2 640 290.3 658 298.5 745 337.9 759 344.3 + + + + + + + + + + 1000 453.6 1150 521.6 1245 564.7 1400 635.0 + + + + + + + + + + + + 1710 775.6 1960 889.0 2280 1034.2
+ Contact Star Pipe Products for Details *All dimensions in black text are in inches except where indicated.
*All dimensions in blue text (below number) are in millimeters except where indicated. GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 16
AWWA Grooved Products
AWWA Grooved Fittings
A
A
A
A
B
B
PIPE SIZE
AE-8C 90º FLARE
L
AE-9C AS-1C AE-10C** AT-3C** 90º LONG RADIUS FLARE STRAIGHT FLARE 90º SIDE OUTLET TEE SIDE OUTLET
NOM. SIZE
ACTUAL SIZE
A
B
APPROX. WEIGHT (LBS)/(KG)
A
B
APPROX. WEIGHT (LBS)/(KG)
L
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
A
APPROX. WEIGHT (LBS)/(KG)
3 80 4 100 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 750 36 900
3.96 100.6 4.80 121.9 6.90 175.3 9.05 229.9 11.10 281.9 13.20 335.3 15.30 388.6 17.40 442.0 19.50 495.3 21.60 548.6 25.80 655.3 32.00 762.0 38.30 914.4
5.50 140 6.50 165 8.00 203 9.00 229 11.00 279 12.00 305 14.00 356 15.00 381 16.50 419 18.00 457 22.00 559 + + + +
8.50 216 9.50 241 12.00 305 13.00 330 15.00 381 16.00 406 22.00 559 23.00 584 24.50 622 26.00 660 30.00 762 + + + +
18 8.2 35 15.9 70 31.8 120 54.4 157 71.2 190 86.2 235 106.6 300 136.1 391 177.4 496 225.0 808 366.5 + + + +
7.75 197 9.00 229 11.50 292 14.00 356 16.50 419 19.00 483 21.50 546 24.00 610 26.50 673 29.00 737 34.00 864 + + + +
11.25 286 12.50 318 15.00 381 18.50 470 22.50 572 25.50 648 29.00 737 32.00 813 35.00 889 38.00 965 44.50 1130 + + + +
23 10.4 42 19.1 68 30.9 118 53.5 188 85.3 275 124.7 325 147.4 435 197.3 571 259.0 713 331.6 1642 744.8 + + + +
8.00 203 8.00 203 8.00 203 10.00 254 10.00 254 12.00 305 12.00 305 16.00 406 16.00 406 18.00 457 18.00 457 24.00 610 24.00 610
13 5.9 17 7.7 23 10.4 43 19.5 58 26.3 100 45.4 120 40.8 156 70.8 205 93.0 221 100.3 293 132.9 567 257.2 736 333.9
5.50 140 6.50 165 8.00 203 9.00 229 11.00 279 12.00 305 14.00 356 15.00 381 16.50 419 18.00 457 22.00 559 25.00 635 28.00 711
13 5.9 30 13.6 58 26.3 90 40.8 124 56.3 170 77.1 202 91.6 272 123.4 378 171.5 468 212.3 736 333.8 1097 497.6 1740 789.3
5.50 140 6.50 165 8.00 203 9.00 229 11.00 279 12.00 305 14.00 356 15.00 381 16.50 419 18.00 457 22.00 559 25.00 635 28.00 711
28 12.7 42 19.1 85 38.6 114 51.7 219 99.3 295 133.8 290 131.5 337 152.9 456 206.8 607 275.3 1048 475.4 1647 747.1 2182 989.7
+ Contact Star Pipe Products for Details *All dimensions in black text are in inches except where indicated. *All dimensions in blue text (below number) are in millimeters except where indicated. **Reducing side outlet 90 elbows, tees and crosses are available. Contact Star Pipe Products for details. °
GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 17
AWWA Grooved Products
AWWA Grooved Fittings
U
R
R
U
U
T
T
S
T
S
PIPE SIZE
U
T
S
AE-12C 90° LONG RADIUS BASE ELBOW
AT-4C BASE TEE
AE-11C 90° BASE ELBOW
R
R
S
AT-5C REDUCING BASE TEE
APPROX. WEIGHT (LBS)/(KG)
BASE DIMENSIONS
NOM. SIZE
ACTUAL SIZE
R
S
T
U
W
ØY
3 80 4 100 6 150 8 200 10 250 12 300 14 350 16 400 18 450 20 500 24 600 30 350 36 900
3.96 100.6 4.80 121.9 6.90 175.3 9.05 229.9 11.10 281.9 13.20 335.3 15.30 388.6 17.40 442.0 19.50 495.3 21.60 548.6 25.80 655.3 32.00 762.0 38.30 914.4
4.88 124 5.50 140 7.00 178 8.38 213 9.75 248 11.25 286 12.50 318 13.75 349 15.00 381 16.00 406 18.50 470 23.00 584 26.00 660
5.00 127 6.00 152 7.00 178 9.00 229 9.00 229 11.00 279 11.00 279 11.00 279 13.50 343 13.50 343 13.50 343 16.00 406 19.00 483
0.56 14 0.62 16 0.69 18 0.94 24 0.94 24 1.00 25 1.00 25 1.00 25 1.12 29 1.12 29 1.12 29 1.19 30 1.25 32
0.50 13 0.50 13 0.62 16 0.88 22 0.88 22 1.00 25 1.00 25 1.00 25 1.12 29 1.12 29 1.12 29 1.15 29 1.15 29
3.88 99 4.75 121 5.50 140 7.50 191 7.50 191 9.50 241 9.50 241 9.50 241 11.75 299 11.75 299 11.75 299 14.25 362 17.00 432
0.63 16 0.75 19 0.75 19 0.75 19 0.75 19 0.88 22 0.88 22 0.88 22 0.88 22 0.88 22 0.88 22 1.00 25 1.00 25
NO. OF BOLTS 4 4 4 4 4 4 4 4 4 4 4 4 4
AE-11C BASE ELBOW
AT-4C BASE TEE
AE-12C LR BASE ELBOW
AT-5C REDUCING BASE TEE
19 8.6 24 10.9 42 19.1 75 34.0 114 51.7 152 68.9 262 118.8 312 141.5 451 204.6 557 252.7 814 369.2 1192 540.7 1798 815.5
19 8.6 26 11.8 50 22.7 92 41.7 125 56.7 183 83.0 293 132.9 338 153.3 489 221.8 632 286.7 895 406.0 1742 790.2 2240 1016.0
25 11.3 40 18.1 76 34.5 141 64.0 206 93.4 310 140.6 340 154.2 425 192.8 770 349.3 717 325.2 1056 479.0 2431 1102.7 3415 1549.0
+ + + + + + + + + + + + + + + + + + + + + + + + + +
ØY
w
NOTES: 1.
Bases of these ttings are intended for support in compression and are not to be used for anchors or supports in tension or shear.
2.
Bases are faced and drilled. Dimension “R” is nished dimension.
3.
Bases 3” - 24” meet the dimensions of ASME B16.1 and B16.42. S
ROUND BASE + Contact Star Pipe Products for Details *All dimensions in black text are in inches except where indicated.
*All dimensions in blue text (below number) are in millimeters except where indicated. GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 18
AWWA Grooved Products
Reducing Fitting Outlet Designation METHOD OF DESIGNATING OUTLETS OF REDUCING FITTINGS FOR SPECIFICATIONS Reducing Tees b
b
c
b
b
c
a
a
Reducing on Outlet
Reducing on One Run
c
c
a
a
Reducing on One Run and Outlet
Reducing on Both Runs (Bull Head)
Reducing Crosses b
b
b
c
c
d
c
d
a
a
Reducing on One Outlet
Reducing on Both Outlets
b
c
d
d
a
a
Reducing on One Run and Outlet
Reducing on One Run and Both Outlets
Reducing Laterals b
b
b
c
c
a
a
Reducing on Branch
Reducing on One Run
d
a
Right Hand
c
d
a
a
Reducing on One Run and Branch
b
a
True Y
Side Outlet 90 deg. Elbow
Double Branch Elbow
b
c
c
b
a
Side Outlet Tee b
c
c
c
a
Right Hand
Left Hand
b
b
c
a
Left Hand
The Largest opening establishes the basic size of a reducing tting. The largest opening is named rst, except for bull head tees which are reducing on both runs and double branch elbows where both branches are reducing; the outlet is the largest opening and named last in both cases. In designating the openings of reducing ttings, they should be read in the order indicated by the sequence of the letters, “a,” “b,” “c” and “d.” In designating the outlets of side outlet reducing ttings, the side outlet is named last; and in the case of the side outlet cross, which is not shown, the side outlet is designated by the letter “e.” GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 19
AWWA Grooved Products
Tap Locations METHOD OF DESIGNATING LOCATION OF TAPPED HOLES
The above illustrations show two views of the same tting and represent ttings with symmetrical shapes, with the exception of the side outlet elbow and the side outlet tee (straight sizes). If tting wall thickness is insufcient for the required tap size or angle of tap, a boss will be required. GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 20
AWWA Grooved Products
Pipe Preparations
A
D
B T
O.D.
C
R DUCTILE IRON PRESSURE PIPE CUT GROOVING SPECIFICATIONS FOR FLEXIBLE AND RIGID JOINTS PIPE OUTSIDE DIA. NOM. SIZE
GASKET SEAL A +0.000/-0.020
ACTUAL O.D.
TOL.
FLEXIBLE JOINT
RIGID JOINT
3
3.960
+0.045/-0.045
0.750
0.840
4
4.800
+0.060/-0.060
0.750
0.840
6
6.900
+0.060/-0.060
0.750
8
9.050
+0.060/-0.060
0.875
10
11.100
+0.060/-0.060
12
13.200
+0.060/-0.060
GROOVE DIA. C
GROOVE WIDTH B +0.031/-0.016
GROOVE DEPTH D
RADIUS R
MIN. WALL THICKNESS T
ACTUAL
TOL.
MIN.
MAX.
0.375
3.723
+0.000/-0.020
0.096
0.151
0.120
0.31
0.375
4.563
+0.000/-0.020
0.096
0.151
0.120
0.32
0.840
0.375
6.656
+0.000/-0.020
0.100
0.154
0.120
0.34
0.950
0.500
8.781
+0.000/-0.025
0.104
0.177
0.145
0.36
0.938
1.015
0.500
10.813
+0.000/-0.025
0.114
0.186
0.145
0.38
0.938
1.015
0.500
12.906
+0.000/-0.030
0.117
0.192
0.145
0.40
14
15.300
+0.050/-0.080
0.938
1.015
0.625
14.969
+0.000/-0.030
0.126
0.206
0.165
0.42
16
17.400
+0.050/-0.080
1.188
1.340
0.625
17.063
+0.000/-0.030
0.128
0.208
0.165
0.43
18
19.500
+0.050/-0.080
1.188
1.340
0.625
19.125
+0.000/-0.030
0.148
0.228
0.185
0.47
20
21.600
+0.050/-0.080
1.188
1.340
0.625
21.219
+0.000/-0.030
0.150
0.230
0.185
0.51
24
25.800
+0.050/-0.080
1.188
1.340
0.625
25.406
+0.000/-0.030
0.157
0.237
0.185
0.56
30
32.000
+0.080/-0.060
1.375
1.625
0.750
31.550
+0.000/-0.035
0.195
0.282
0.215
0.63
36
38.300
+0.080/-0.060
1.375
1.625
0.750
37.850
+0.000/-0.035
0.195
0.282
0.215
0.73
NOTES: 1.
When rigid radius groove is used, the pipe or tting ends are drawn together in contact as the coupling is tightened whereas when exible radius groove is used it allows for moderate conditions of pipe movement or deection due to thermal, seismic or settling activities.
2.
Gasket seat “A” must be free from scores, seams, loose paint, scale, dirt, grease and rust to assure a leak tight seal.
3.
Pipe end squareness (ends must be square cut) maximum allowable tolerance from square cut ends is 0.030" for 3" size, 0.045" for sizes 4" and 6", 0.060" for sizes 8" through 36".
4.
Groove diameter must have uniform depth for entire circumference.
5.
Pipe out of roundness - difference between maximum O.D. and minimum O.D. measured at 90° must not exceed total O.D. tolerance listed.
GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 21
AWWA Grooved Products
Sample Specifcations STAR PIPE PRODUCTS - SAMPLE SPECIFICATIONS
Grooved Piping System for AWWA Ductile Pipe – Mechanical grooved pipe couplings and ttings as manufactured by Star Pipe Products or equal shall be used on all ductile iron piping systems. Grooved end product manufacturer to be ISO-9001:2008 certied. Pipe Materials – Grooved end ductile iron pipe shall be grooved in accordance with ANSI/AWWA Standard C-606. Rigid radius groove dimensions shall be utilized where exibility is neither required nor desired. Flexible grooves shall be provided as necessary for settlement or expansion as determined and approved by the engineer. Mechanical Couplings – Mechanical couplings shall be Star AC-9 cast of ductile iron conforming to ASTM A-536, grade 65-45-12, with rust resistant primer coating (unless specied otherwise) with a Flush synthetic rubber gasket and plated nuts and bolts, 3" - 36" size range. Couplings Bolts/Nuts – Bolts shall be heat-treated plated carbon steel, track-head meeting the physical and chemical requirements of ASTM A-449 and physical requirements of ASTM A-183, or optional – hex head bolts and nuts shall be Type 316 stainless steel conforming to ASTM A-193, Grade B-8M, Class 2. AC-9Gaskets – Gaskets shall be ush design molded of synthetic rubber to conform to ductile pipe surfaces with a short center leg which shall bridge the pipe ends offering an initial seal on the leading edge of the pipe ends. Elastomers shall have properties as designated in ASTM D-2000. Reference shall always be made to the latest published Selection Guide for Star gaskets for proper gasket selection for the intended service. Water Service/Ductile Iron Pipe – Gasket supplied for water service from -20° F to +200° F on ductile iron pipe shall be Grade “M” halogenated butyl, with brown color code, specially compounded to conform to ductile pipe surfaces recommended for water service within the specied temperature range plus a variety of diluted acids, oil-free air, and many chemical services (not recommended for petroleum services). Gasket supplied for water service from -20° F to +200° F for the Star AF-4 ange adapter shall be Grade “M” halogenated butyl. Oil Service/Ductile Iron Pipe – Gasket supplied from -20° F to +180° F on ductile iron pipe shall be Grade “S” nitrile, with red color code, compounded to conform to ductile pipe surfaces recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specied temperature range, except hot dry air over +140° F and water over +150° F. Not recommended for hot water services. Fittings – Fittings shall be ductile iron conforming to ASTM A-536, grade 65-45-12 and conform to the requirements of ANSI/AWWA-C110/A21.10 for center to end dimensions and ANSI/AWWA-C110/A21.10 or ANSI/AWWA C153/A21.53 for wall thickness. End preparation are per ANSI/AWWA-C606 rigid radius grooving. Grooved/Flanged Transition Components – Star AF-4 ange adapter shall be used for connecting grooved ttings to anged valves, pumps, pipe, ttings, and other Class 125 anged components. The ange adapters shall be ductile iron conforming to ASTM A-536, grade 65-45-12, 3" - 24" size range. Gaskets shall have properties as designated by ASTM D-2000 of the same compounded elastomer as the couplings, and shall be suitable for the required service. Latch bolts & nuts shall be same as for the couplings.
GRVDCAT.14.01
® REGISTERED TRADEMARK OF STAR PIPE PRODUCTS STAR ® PIPE PRODUCTS HOUSTON CORPORATE TOLL FREE 1-800-999-3009 FAX 281-558-9000 www.starpipeproducts.com
Page 22
View more...
Comments
