AVEVA Bocad Training Modules and Guides Summary

0. 1. 2. 3.

Main Discipline Area (Skill Level)

Admin Guide

User Guide

AVEVA Schematics and Engineering

Unintelligent Drawing Upgrade Guide

AVEVA Diagrams

Schematic Model Manager

Schematic 3D Integrator Schematic Gateways Schematic TAGS

AVEVA Instrumentation

AVEVA Marine (Hull)

AVEVA Marine (Initial Design)

AVEVA Electrical

INITIAL DESIGN

DISCIPLINE

ADMINISTRATION SPECIALIST

AVEVA Marine (Common)

BASIC

ADMINISTRATION

SPECIALIST

TM-3415

AVEVA PID (12.1) Admin Training

TM-3401

AVEVA PID (12.1) Admin (PP)

TM-3445

AVEVA PID (12.1) Training

TM-3423

AVEVA PID (12.1) Day1 Session1 (PP)

TM-3431

AVEVA PID (12.1) Day2 Session1 (PP)

TM-3460

TM-3460 AVEVA PID (12.1) Reports Training

TM-3461

AVEVA PID (12.1) PID Rep 1 (PP)

TBC

AVEVA PID (12.1) Unintelligent Upgrade Training

TBC

AVEVA PID (12.1) Unintelligent Upgrade Training (PP)

TM-3501

AVEVA Diagrams Plant (12.1) Cable Diagrams

TM-3502

AVEVA Diagrams Plant (12.1) P&ID Designer

TM-3503

AVEVA Diagrams Plant (12.1) HVAC Diagrams

TM-3504

AVEVA Diagrams Plant (12.1) Administration

TM-3521

AVEVA Diagrams Marine (12.1) Cable Diagrams

TM-3522

AVEVA Diagrams Marine (12.1) P&ID Designer

TM-3523

AVEVA Diagrams Marine (12.1) HVAC Diagrams

TM-3524

AVEVA Diagrams Marine (12.1) Administration

TM-3541

AVEVA Plant (12.1) Schematic Model Manager

TM-3541

AVEVA Plant (12.1) Schematic Model Manager

TM-3542

AVEVA Plant (12.1) Schematic Model Manager , Admin

TM-3561

AVEVA Plant(12.1) Schematic 3D Integrator

TM-3562

AVEVA Marine (12.1) Schematic 3D Integrator

TM-3563

AVEVA Plant (12.1) Schematic-3D-Integrator (Administration)

TM-3570

AVEVA (12.1) Schematic Gateway for Smart Plant P&ID

TM-3550

AVEVA Plant (12.1) Engineering TAG module (Basic)

TM-3551

AVEVA Plant (12.1) Engineering TAG module (Advanced)

TM-3552

AVEVA Plant (12.1) Engineering administration

TM-6101

AVEVA Instrumentation Project Administrator

TM-6102

AVEVA Instrumentation Engineer

TM-6103

AVEVA Instrumentation Wiring Manager

TM-6104

AVEVA Instrumentation Designer

TM-6501

AVEVA Electrical Project Administrator

TM-6502

AVEVA Electrical Engineer

TM-6503

AVEVA Electrical Wiring Manager

TM-6504

AVEVA Electrical Designer

TM-2000

Initial Design Introduction & Project Set-up

TM-2001

Surface

TM-2002

Compartment

TM-2003

Lines (Design)

TM-2004

Lines (Production)

TM-2005

Hydrostatics

TM-2006

Probabalistic Stability

TM-2007

Hydrodymanics

TM-2008

Surface Manager

TM-2101

Hull Structural Design

TM-2102

Hull Detailed Design - Planar Hull Modelling

TM-2103

Hull Detailed Design - Curved Hull Modelling (Combined)

TM-2106

Hull Detailed Design - Hull Production Information

TM-2107

Hull Detailed Design - Plate Nesting

TM-2109

Space Management

TM-2110

Common Reference Model

TM-2141

FEM

TM-2122

Project Administration (Hull)

TM-2130

Vitesse Basic / Data Extraction

TM-2131

Vitesse Hull / Advanced

TM-2100

Marine Drafting

TM-2108

Assembly Planning & Hull Weld Planning

TM-2132

Migration

TM-2203

Review

TM-2204

Reporting

TM-2239

Clash Manager

TM-2262

Global

TM-2120

System Administration (Basic)

TM-2121

System Administration (Advanced)

TM-2123

Marine Drafting Administration

TM-2254

Clash Manager Administration

TM-2263

Programmable Macro Language (Basic)

TM-2264

Programmable Macro Language (Advanced)

TM-2268

.NET Custimisation

NICOLAS ROUSSEAU

Product Development

JOERG BUHREN

JOEL WECHSELER

GERT STOCKFISCH

DOAN-TRINH PHAM THI

ALEXANDRE BEDIN

JOHN BUCK

BoCad

HENRY UYEME

KENNETH IGBE

SELCAN ROWLES

GUSTAVO CUERVO

CHRIS TINGLE

DAVID WRIGHT

SOMAYEH TOURANIAN

Schematics

SHASHANK SHARDA

STEPHEN BURROWS

BRYN TOOTELL

NICK GLYNN

KEVIN BROWNLIE

Plant

STEVE MORTON

ANTHONY HORRELL

WAYNE ROWLES

JAMES PAGET

This manual TM-0001 is for AVEVA Training personnel Setup only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines.

Outfitting

STAN KERNEN

ALF JONSSON

Hull

MACIEJ ZALEWSKI

ÖZGUR KIZILOCAK

Initial Design

IAN APPLEGARTH

N/A Very low knowledge Low knowledge, but know whom to contact and where to look for info. Some knowledge which can be built on. Questions can be answered and discussions around the program/function can be handled. Can demo with structured material. 4. Good knowledge, can handle support calls with confidence. Can deliver training. 5. Very high knowledge. Aware of the background of the program/functionality and can answer most questions without having to check documentation and/or consult developer. Can take active role in a workshop and benchmark

PD Contact

PD Product Manager

PD Team Lead

TM-2201

AVEVA Outfitting Foundations

TM-2202

Outfit Drawing Production (Basic)

TM-2220

Pipework Modelling

TM-2221

Outfit Structural Modelling

TM-2222

Cable Tray

TM-2223

Heating, Ventilation & Air Conditioning Modelling

TM-2225

Cable Design

TM-2227

Room Design

TM-2228

Iso ADP (Cable Tray / HVAC)

TM-2229

Pipe Fabrication

TM-2230

Outfit Drawing Production (Advanced)

TM-2231

Router

TM-2232

Spooler

TM-2234

Multi Discipline Supports

TM-2235

Piping Catalogues & Specifications

TM-2236

Cabling and Cable Tray Cats & Specs

TM-2237

Structural Catalogues & Specifications

TM-2238

Equipment Design (Advanced)

TM-2240

Room Design Catalogue and Specifications

TM-2241

AVEVA Outfitting Supports

TM-2242

Equipment Seat Application

TM-2252

Project Administration (Outfit)

TM-2253

Outfit Project Drawing Administration

TM-2255

Multi Discipline Supports Administration

TM-2256

AVEVA Outfitting Supports Administration

TM-2261

Structural Design Templates

TM-2270

Pipe Stress Interface (Admin)

INTERFACES

TM-2271

Pipe Stress Interface (User) (Caesar II 5.1)

Training Setup

TM-0001

Training Setup

BASIC

TM-1000

AVEVA PDMS Hands-On Overview

TM-1001

AVEVA PDMS Foundations

TM-1002

Drawing Production (Basic)

TM-1003

Design Utilities

TM-1004

Reporting

TM-1100

Pipework Modelling

TM-1101

Structural Modelling

TM-1102

Cable Tray Modelling

TM-1103

Heating, Ventilation & Air Conditioning Modelling

TM-1104

Equipment Modelling

TM-1105

Electrical & Instrumentation Equipment Modelling

TM-1106

Cable Design

TM-1108

Building Applications

TM-1109

Walls and Floors Miodelling

TM-1200

Equipment Design Templates

TM-1202

Piping Catalogues & Specifications

TM-1203

Structural Catalogues & Specifications

TM-1204

Cabling and Cable Tray Cats & Specs

TM-1205

Structural Design Templates

TM-1206

Drawing Production (Advanced)

TM-1207

Pipe Router

TM-1208

Spooler

TM-1209

Area Based Automatic Drawing Production

TM-1210

Multi-Discipline Supports

TM-1212

HVAC - Cableway Isometric Automatic Drawing Production

TM-1220

Model Object Manager

TM-1221

Clash Manager

TM-1300

System Administration (Basic)

TM-1301

System Administration (Advanced)

TM-1302

Project Drawing Administration

TM-1303

Project Design General Administration

TM-1304

Multi-Discipline Supports Administration

TM-1305

Area Based Automatic Drawing Production (Administration)

TM-1307

Building Applications Administration

TM-1308

Lexicon

TM-1309

Piping Design Administration

TM-1310

HVAC Design Administration

TM-1321

Clash Manager Administration

TM-1400

Administering Global Projects

TM-1401

PML Macros & Functions

TM-1402

PML Form Design

TM-1403

PML Applied

TM-1406

.NET Customisation

TM-1500

OpenSteel

TM-1501

Pipe Stress Interface (Admin)

TM-1503

Pipe Stress Interface (User)

TM-1504

AVEVA Laser Modeller (User)

TM-1505

AVEVA Laser Modeller (Admin)

BASIC

AVEVA Marine (Outfitting)

DISCIPLINES

ADVANCED

ADMINISTRATION

SPECIALIST

Laser Model Interface

DISCIPLINE

AVEVA Plant

ADVANCED

ADMINISTRATION

SPECIALIST

INTERFACE

NICOLAS ROUSSEAU

JOERG BUHREN

JOEL WECHSELER

GERT STOCKFISCH

DOAN-TRINH PHAM THI

ALEXANDRE BEDIN

JOHN BUCK

HENRY UYEME

KENNETH IGBE

SELCAN ROWLES

GUSTAVO CUERVO

CHRIS TINGLE

DAVID WRIGHT

SOMAYEH TOURANIAN

SHASHANK SHARDA

STEPHEN BURROWS

BRYN TOOTELL

NICK GLYNN

KEVIN BROWNLIE

STEVE MORTON

ANTHONY HORRELL

WAYNE ROWLES

JAMES PAGET

STAN KERNEN

ALF JONSSON

MACIEJ ZALEWSKI

ÖZGUR KIZILOCAK

IAN APPLEGARTH

This manual TM-0001 is for AVEVA Training personnel Setup only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines.

PD Contact

PD Product Manager

PD Team Lead

Training Setup Basics

Modelling

AVEVA Everything 3D

Drawing Production

Catalogues & Specifications

Tools

Administration

Programming

SDNF

TM-1800

AVEVA Everything3D™ Training Setup

TM-1801

AVEVA Everything3D™ Foundations

TM-1802

AVEVA Everything3D™ Model Utilities

TM-1803

AVEVA Everything3D™ Reporting

TM-1810

AVEVA Everything3D™ Pipework Modelling

TM-1811

AVEVA Everything3D™ Equipment Modelling

TM-1812

AVEVA Everything3D™ Structural Modelling

TM-1813

AVEVA Everything3D™ Stairs, Ladders & Handrail Modelling

TM-1814

AVEVA Everything3D™ Walls & Floors Modelling

TM-1815

AVEVA Everything3D™ Cableway & Cable Modelling

TM-1816

AVEVA Everything3D™ Cable Tray Modelling

TM-1817

AVEVA Everything3D™ Heating, Ventilation & Air Conditioning Modelling

TM-1818

AVEVA Everything3D™ Multi-Discipline Supports

TM-1819

AVEVA Everything3D™ Electrical & Instrumentation Equipment Modelling

TM-1821

AVEVA Everything3D™ Using Laser Models

TM-1830

AVEVA Everything3D™ Draw

TM-1831

AVEVA Everything3D™ Automatic Drawing Production

TM-1832

AVEVA Everything3D™ Area Based Automatic Drawing Production

TM-1840

AVEVA Catalogue Piping Catalogues & Specifications

TM-1841

AVEVA Catalogue Structural Catalogues & Specifications

TM-1842

AVEVA Catalogue Cable Catalogues & Specifications

TM-1850

AVEVA Everything3D™ Pipe Router

TM-1851

AVEVA Everything3D™ Spooler

TM-1852

AVEVA Everything3D™ Equipment Design Templates

TM-1853

AVEVA Everything3D™ Structural Design Templates

TM-1854

AVEVA Everything3D™ Clash Manager

TM-1855

AVEVA Everything3D™ Schematics 3D Integrator

TM-1860

AVEVA Administration System Administration (Basic)

TM-1861

AVEVA Administration System Administration (Advanced)

TM-1862

AVEVA Administration Lexicon

TM-1863

AVEVA Global Administering Global Projects

TM-1864

AVEVA Everything3D™ Stairs, Ladders & Handrail Administration

TM-1865

AVEVA Everything3D™ Multi-Discipline Supports Administration

TM-1867

AVEVA Everything3D™ Project Modelling General Administration

TM-1868

AVEVA Everything3D™ Pipe Modelling Administration

TM-1869

AVEVA Everything3D™ HVAC Modelling Administration

TM-1870

AVEVA Everything3D™ Draw Administration

TM-1871

AVEVA Everything3D™ Automatic Drawing Production Administration

TM-1872

AVEVA Everything3D™ Area Based Automatic Drawing Production Administration

TM-1873

AVEVA Everything3D™ Isodraft Administration

TM-1874

AVEVA Everything3D™ Clash Manager Administration

TM-1875

AVEVA Everything3D™ Schematics 3D Integrator Administration

TM-1880

AVEVA Everything3D™ PML Macros & Functions

TM-1881

AVEVA Everything3D™ PML Form Design

TM-1882

AVEVA Everything3D™ PML Applied

TM-1883

AVEVA Everything3D™ .NET Customisation

TM-1890

AVEVA Everything3D™ SDNF Interface

NICOLAS ROUSSEAU

JOERG BUHREN

JOEL WECHSELER

GERT STOCKFISCH

DOAN-TRINH PHAM THI

ALEXANDRE BEDIN

JOHN BUCK

HENRY UYEME

KENNETH IGBE

SELCAN ROWLES

GUSTAVO CUERVO

CHRIS TINGLE

DAVID WRIGHT

SOMAYEH TOURANIAN

SHASHANK SHARDA

STEPHEN BURROWS

BRYN TOOTELL

NICK GLYNN

KEVIN BROWNLIE

STEVE MORTON

ANTHONY HORRELL

WAYNE ROWLES

JAMES PAGET

STAN KERNEN

ALF JONSSON

MACIEJ ZALEWSKI

ÖZGUR KIZILOCAK

IAN APPLEGARTH

This manual TM-0001 is for AVEVA Training personnel Setup only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines.

PD Contact

PD Product Manager

PD Team Lead

AVEVA Plant (12 Series) Training Modules and Guides ISSUED Module ID

Module and Training Guide Title

TM-0001

Training Setup

TM-1000

AVEVA PDMS Hands-On Overview

TM-1001

AVEVA PDMS Foundations

TM-1002

Drawing Production (Basic)

TM-1003

Module Training Guide Content Summary This manual is for AVEVA personnel only, to setup the Training Project for Customer training. Covers training project DB's for MDS, PDMS and related disciplines.

Hand on PDMS Appreciation, covering from PDMS Database Structure, worked examples of various Design disciplines, simple Catalogue creatin, through to Drawing Production AVEVA PDMS Fundamentals, User Interface Basics, Displaying Model Elements, Working with 3D Views, General Utilities, Attributes, Positioning and Orientation, Introduction to Model Editor, Basic Equipment Modelling, Equipment Modelling Using Templates, Equipment Utilities, Volume Modelling

Duration (Days)

Pre-requisites

Target Personnel

Replacing Existing Training Modules

0

For AVEVA Personnel only, when conducting Training for Customers.

NONE

NONE

Management Project Leaders

2

None

3

Knowledge of Windows XP, Keyboard Skills

All Designers and Engineers

M3, M4

Draft Hierarchy, View Creation, 3D View, Dimensioning, Labelling, 2D Draughting, Flat Section Planes

2

AVEVA PDMS Foundations

All Designers and Engineers

M10

Design Utilities

Clash Detection, Quick Reports, Reporter using templates, Surface treatment reports, Mass properties & CofG, Status Control, Representation rules (Design)

½

AVEVA PDMS Foundations

All Designers and Engineers

M11, M12

TM-1100

Pipework Modelling

Pipework Modelling, Pipe Routing, Replacing Components, Data Consistency Checker, Clash Detection, Hole Management, Isometric Production, Sloping/Falling Pipelines, Alternative Posistioning forms, Pipe Assemblies, Pipe Splitting, Pipe Editing (re-bore/re-spec), Pipe Fabrication Machine. Production Checks, Flange enhancements

2

AVEVA PDMS Foundations

Piping Designers

TM-1101

Structural Modelling (Basic)

Setting-up the Database hierarchy for Structures, Beams & Columns, Modifying Structural Sections, Beam & Column Utilities, Regular Structures, Section Fittings and Joints, Panels & Plates, Negative Extrusions and Panel Fittings, Material assignment (Weights, CofG calculations)

2

AVEVA PDMS Foundations

Structural Designers

M6

TM-1102

Cable Tray Modelling

Cable Tray Modelling Concepts, Creation of Cable Tray branches, In-line Components, Model Editor for Cable Tray, Reporting for Cable Tray, Data consistency checks

2

AVEVA PDMS Foundations

E&I Designers

M9

Heating, Ventilation & Air Conditioning Modelling

HVAC Design Features, Getting Started, Learning about the PDMS HVAC database hierarchy, Routing a sequence of HVAC components, Adding to the HVAC model, HVAC Splitting, Completing the Design, Hole Management, Checking and Outputting Design Data, HVAC Systems, HVAC Spooling, HVAC Sketches

2

AVEVA PDMS Foundations

HVAC Designers

M8

TM-1105

Cableway & Cabling Design

Cableway Modelling, Route Attachment Points, Cableway Route node Points, Cableway Qucik Router, Splitting Cableways. Cable Tray Material, Cableway / Tray Penetrations Cable routing, Cable Import, Cable Data Utility

2

AVEVA PDMS Foundations

E&I Designers

N/A

TM-1106

E & I Modelling

Modelling and Managing Electrical and Instrument items. Non parametric templates creation, modification, linking 3D objects to documents

1

AVEVA PDMS Foundations

E&I Designers

TM-1107

AVEVA Diagrams (Pipe)

Contact John Reynard for further details

TM-1108

AVEVA Diagram (HVAC)

Contact John Reynard for further details

TM-1109

Nuclear Concrete Design PDMS 11.6 Version

Data Structure in Nuclear Concrete Design, Floor and Wall Hierarchy and Elements creation, Create / Modify Floor and Walls. Use contour editior for points modifications, Creation / Modification of Beams, Colums, Ladders, Concrete Stairs, Steel Stairs, Spiral Stairs

2

AVEVA PDMS Foundations

Structural Designers

N/A

TM-1110

Nuclear Room Manager PDMS 11.6 Version

Overview of Nuclear Room Manager, Room Volume definition and creation, Room inventory, Utilities, eg Flood Water sumulation, Paint Area calculations, etc

2

AVEVA PDMS Foundations

Structural Designers

N/A

TM-1111

Room Design

(Not available in Plant)

N/A

TM-1112

ASL

HOLD

N/A

TM-1103

M2

M5, M11, M13

TM-1104

TM-1113

Nuclear Application

Data structure and hierarchy. Create/modify beams, columns, walls, floors, sub-components, handrail, stairs, and ladders. Create/modify room volumes, flooding and inventory reports. Create/modify quantity reports.

4

Structural modelling (basic) or an understanding of the Walls & Floors application.

Structural Designers

N/A

TM-1114

Nuclear Application Admin

Product installation, configuration and set up requirements. Parameter files, catalogue and specification requirements (this does not include detailed Cats & Specs for Nuclear items).

½

TM-1200

Equipment Design (Advanced)

Equipment Templates (Parametrised & Nonparameterised), Selection Tables, Equipment Associtaions, Hole Management for Equipment.

2

Any Discipline Modelling Course

Advanced Pipework or E&I Designers

M19

TM-1201

Structural Modelling (Advanced)

3D Aid Constructs & Working Planes, Curved Profiles, Hole Management

2

Structural Modelling (Basic)

Advanced Structural Designers

M18

TM-1202

Piping Catalogues & Specifications

What Paragon Does, The Catalogue Database Structure, Paragon - General Application, Component Creation, Constructing Pointsets, Creation of Geometry Sets, Creating Text Elements, Component Part Families, Coding Systems, Connection Compatibility Tables, Pipe Speifications, Component Insulation and Specification, Design Parameters, Nozzle Specifications, Bolting, Datasets, Attachment points, Properties, Spooling, Component Item Codes, Catalogue Database Consistency, Administration,

5

Pipework Modelling

Designated Cats & Specs personnel with Piping Design background.

M22

TM-1203

Structural Catalogues & Specifications

General Pinciples, Structural Profiles, Design Parameters and Non-Prismatic Profiles, Section Fittings, Panel Fittings, Joints

5

Structural Modelling (Advanced)

TM-1204

Cabling Catalogue and Specifications

TBC

TM-1205

Structural Design Templates

Template Hierarchy, Basic Referencing, Property Relationships, Initial Modelling, Capturing the Elements, Adding Properties, Data Ranges & Valid Values, Parametrisation, Design Points, Local Names, Repeat Elements

5

Structural Cats & Specs

Advanced Structural Designers

M32

TM-1206

Drawing Production (Advanced)

3D View, Autotagging, Change Highlighting, General ADP, Symbolic Representation

2

Drawing Production (Basic)

All Designers and Engineers

M20

TM-1207

Pipe Router

Basic Routing, Positioning and Locking Components, Creating and Uaing Routing Points, Routing Planes, Creating and Using Pipe Rack, Pipe Packing, Routing Rules

1

Pipework Modelling

Piping Designers

M16

TM-1208

Pipe Spooler

Controlling Spooler, Preparation for Spooler, Creating a Spool Drawing, Spooling Piping Network, Advanced Spooler Features, Outputting Spool Drawings

1

Pipework Modelling

Piping Designers

M17

TM-1209

Area Based Automatic Drawing Production (User)

Basic Components of an ABA Drawing, Remplates, Areas, etc Creating AB-ADP Drawing, Processing options, Regenerate process, AB-ADP defaults, View Log files, Setting Drawing names.

½

Drawing Production (Basic)

All Designers and Engineers

N/A

TM-1210

Multi-Discipline Supports

MDS Basic Concepts of a Support, Entering the MDS Application, MDS Defaults, Multi Discipline Support, Modification of a Support, Deleting a Support, Locking a Support, Cable Rack Support, HVAC Support, Creation of a General Support, Trunnion Support, Fixed Hanger, Variable Hanger, Fixed/Variable Hanger Creation Modes, Special Supports, Support Groups, Lighting Supports, Vessel Supports, Branch Reinforcement, Preliminary Supports, Copying a Support, Modifying a Support Name, MDS Wizard, MDS Helath Check Utility, MDS Reports, Miscellaneous Utilities, MDS Drawing Production, MDS Manuals & Help

2

Pipework Modelling or HVAC Modelling or E&I Modelling

Piping Designers, HVAC Designers and E&I Designers

M15

TM-1211

P & ID Integrator

Contact John Reynard for further details

TM-1220

Model Object Manager

MOM concepts,Controlling 2D & 3D objects, Building contolled Pipes, Equipments and Instruments

1

AVEVA PDMS Foundations, Pipework Modelling and E&I Modelling.

All Designers and Engineers

M40

TM-1221

Clash Manager

Clash Manager concepts,Creating & Executing Clash Sets, Approval of Clashes, Clash Groups, Clash Reports

1

AVEVA PDMS Foundations

All Designers and Engineers

M41

TM-1222

Deliverable Manager

Controlling deliverables such as isometrics, equipment drawings and pipe support details depending upon attribute values.Produce and detail the drawings,Adding notes and stickers to Drawings

1

Model Object Manager, AVEVA PDMS Foundations, Pipework and Equipment Modelling.

Piping and Equipment Designers and Engineers

M42

Connectivity Manager

P&ID to 3D graphical comparison of equipment, nozzle, line and piping/instrument component data between AVEVA PE P&IDs and PDMS models.Connectivity reports,Building of Pipe, Equipment and inline components

1

AVEVA PDMS Foundations, Pipework Modelling and E&I Modelling.

Piping and Equipment Designers and Engineers

M43

TM-1223

Basic understanding of PDMS system administration and Nuclear Applications Administrators utilities.

TBC at Electrical & Instruments Modelling 12.0.SP2

Designated Cats & Specs personnel with Structural Design background. Designated Cats & Specs personnel with E & I background.

N/A

M23 N/A

Final Designer

Not Available for PDMS12.SP2.1 Yet

2

Drawing Production and good AutoCAD knowledge

Drawing Production Personnel

TM-1300

System Administration (Basic)

Project Access, Creating a New Project, Teams and Users, Password security, Creating Databases, Foreign Databases, MDBs,Testing AVEVA Plant Access, Reference Between Databases, NT Authentication, Sharing Projects and Files, Multiwrite Databases, Project Administration, Project Setup Excel Import, Environment Variables, Data Integrity Checking, Reconfigure, Backing Up Data

2

Any Discipline Course

System Adminstrators

M25, M35

TM-1301

System Administration (Advanced)

Extract Databases, Lexicon, Creating UDA's and UDET's, Data Access Control, PML Encryption, IPR Database Encryption

2

Basic System Administration

System Adminstrators

M26

TM-1302

Project Drawing Administration

Draft Administration, IsoDraft Administration and ADP Administration

3

Drawing Production (Basic)

Project Administrators and System Administrators

TM-1303

Project Design Administration

HVAC Administration, ASL Administration, Cable Administration (Future), Systems, Assemblies, Association Requirements, Hole Management Requirements, Pipe Assemblies

2

Any Discipline Course

TM-1304

Multi-Discipline Supports Administration

MDS Projects and Databases, Project Catalogue Requirements and minimum DAC, Configuration Checklist, Accessing NDS Administration Form and Menus, MDS Admin Form, MDS Ancillary Defaults Form, MDS Hanger Data Form, Hangers Design Templates, MDS Lighting Support Defaults, Structure Defaults Form, Framework Template Administration, MDS Trunnion Defaults Form, Trunnions, MDS Autonaming, MDS User Plots, Report Defaults, MDS Drawing production

1

Multi-Discipline Supports

TM-1305

Area Based Automatic Drawing Production (Administration)

Basic components of AB-ADP, Templates, Areas, etc. AB-ADP defaults, Creating classifications, areas, Auto Tag rules, Creating tasks, Setting up Templates, Creating Drawing registry areas, Applying to Keyplans, Building Tasks.

1

Area Based Automatic Drawing Production (User) and Programmable Macro Language (Basic)

TM-1320

Model Object Manager Administration

Creating of Database instance(Oracle), Installing & Configuration of Model Management,Creating UDA's in VPE and mapping it across to PDMS, Releasing items in VPE, Issuing items for 3D design.

1

Model Manager,AVEVA PDMS Foundations

System Adminstrators

M40A

TM-1321

Clash Manager Administration

Creating of Database instance(Oracle & SQL), Installing & Configuration of Clash Manager,Assingning of Clashes to Disciplines, Setting up of Clash Manager users, Setting up of automatic assignment rules.

1

AVEVA PDMS Foundations

System Adminstrators

M41A

TM-1322

Deliverable Manager Administration

Installation and Configuration of Deliverable Manager

1

Model Object Manager, AVEVA PDMS Foundations, Pipework and Equipment Modelling.

System Adminstrators

M42A

TM-1323

Connectivity Manager Administration

Creating of Database instance(Oracle), Installing & Configuration of Model Management, Exporting data from P&ID to VPE, Releasing items in VPE, Creating UDA's in VPE and mapping it across to PDMS,Issuing items for 3D Design and PCM

1

Connectivity Manager

System Adminstrators

M43A

TM-1324

AVEVA Schematics 3D Integrator Contact John Reynard for further details

1

Connectivity Manager

System Adminstrators

M43A

TM-1325

AVEVA Schematics (Admin)

1

System Administration

System Adminstrators

M34

5

Any Discipline course

Advanced Designers

M33

TM-1230

TM-1400

Global

Concepts and Terminology, Setting Up a Global Project, Satellite Project Structure, Unscheduled Database Updates, Transaction Database Administration, Databases in a Global Project, Tseating AVEVA Plant Global Access in Design, Global Daemon Service, Extract Databases, Working with Extract Databases in a Global Project, Data Access Control in a Global Project, Managing Databases in a Global Project, Transaction Failures

TM-1401

Programmable Macro Language (Basic)

TBC

M44

M27, M28, M29

N/A

Designated MDS Administration Personnel

M31

N/A

TM-1402

Programmable Macro Language (Advanced)

pml.net, creating applications, interaction with PDMS

5

Programmable Macro Language

Application Personnel

N/A

TM-1500

OpenSteel

TBC

2

Structural Modelling

Advanced Structural Designers

M24

Pipe Stress Interface (Admin)

Project Installation and configuration, Catalogue and Design UDA settings, PSI interface settings, Expressions, Restraint settings

1

Pipework Modelling

Pipe Stress Engineers

M30

1

Pipework Modelling

Pipe Stress Engineers

M30

1

Any Discipline Course

Advanced Designers

M38

TM-1501

TM-1502

Pipe Stress Interface (User) (Caesar II 5.1)

Laser Model Interface (vendor specific)

TM-1900

PSI Interface, Creation / Display of Stress Groups,, Rebuild Stress groups, Animation, Stress group nodes, attributes, Checking of Stress groups, PDMS to CAESAR II, Transfer and stressing network, Reports, CAESAR II to PDMS, Add Pipe Supports & Anchors.

Vendor dependant

User Interface changes, multi drawlists, 3D views, Design explorers, Plant Grid systems, Groups, search, Command PDMS Foundations and Design Utilline window, Surface Treatment, Mass properties, Status Control, Representation rules in Design

All Designers and Engineers All Support / Administrators PDMS11.6 Knowledge

Equipment Modelling Upgrade

New equipment primitive creation forms, import equipmet tags, Design Templates, Volume Modelling, Equipment Associations, Hole Management, Selection tables

PDMS11.6 Knowledge

TM-1902

Pipework Modelling Upgrade

Pipe Splitting, Re-spec and Re-bore, Pipe assemblies, Pipe Fabrication Machine, Production checks, New Piping component attributes, Flange enhancements, Pipe penetrations, Hole Management

PDMS11.6 Knowledge

TM-1903

Structural Modelling Upgrade

Enhanced Mitring , Enhanced Split functionality, Profile Filleting, Mass properties (Weights, CofG), Hole Management

TM-1904

Piping Cats & Specs Upgrade

Combined Paragon, Specon, Propcon, New database elements (Part families and Selection Tables), New interface, Gparts, Branch tables, Bolting, Flange offsets, Mitre / Pulled bends, Surface treatment

TM-1905

System Admin Upgrade

Database evolution, System limits, project wizard, excel import, PML publisher, IPR database protection, Password security, NT Authentication

PDMS11.6 Knowledge

TM-1906

Drawing Production Upgrade

Unbundling of colours from pens, true type fomts, improved printing, 2D symbology, project upgrading

PDMS11.6 Knowledge

All Designers and Engineers All Support / Administrators

TM-1907

PML Upgrade

PDMS11.6 Knowledge

All Designers and Engineers All Support / Administrators

Not Available for PDMS12.0.SP5 (Same as 12.0.SP4)

2 to 3 days

TM-1901

PDMS11.6 Knowledge

PDMS11.6 Knowledge

All Designers and Engineers All Support / Administrators All Designers and Engineers All Support / Administrators

All Designers and Engineers All Support / Administrators All Designers and Engineers All Support / Administrators

All Designers and Engineers All Support / Administrators

AVEVA Marine (12 Series) Common Training Modules and Guides

ADMINISTRATION

BASIC

Module Group

Module ID

Module and Training Guide Title

Module Training Guide Content

Duration (Days)

Pre-requisites

Target Personnel

TM-2100

Marine Drafting

Introduction to AVEVA Marine Hull Concept, overview of user interface and basic functionality

2

Knowledge of Windows XP, Keyboard Skills

All Designers and Engineers

TM-2108

Assembly Planning & Hull Weld Planning

All Assembly Planning & Weld Planning Functionality

1

None

Steelwork Designers Outfit Designers Planning Engineer

TM-2132

Migration

Project Migration fromTribon M3 series to AVEVA Marine 12.1

TM-2203

Review

TM-2204

Reporting

TM-2239

Clash Manager

Comments

Module Upgrade Content

Intended as an introduction and foundation for All New Users before taking other courses.

0.5

0.5

System Administration, basic and System Administrators Advanced

N/A

2

Knowledge of Windows XP, Keyboard Skills

All Designers and Engineers

AVEVA Hull / Outfitting

All Designers and Engineers

Upgrade Training Duration (Days)

N/A

Documentation supplied with Review is adequate for Training

N/A

N/A

Any Discipline Course

N/A

TM-2262

Global

Concepts and Terminology, Setting Up a Global Project, Satellite Project Structure, Unscheduled Database Updates, Transaction Database Administration, Databases in a Global Project, Testing AVEVA Marine Global Access in Design, Global Daemon Service, Extract Databases, Working with Extract Databases in a Global Project, Data Access Control in a Global Project, Managing Databases in a Global Project, Transaction Failures

TM-2120

System Administration (Basic)

System Set-up, Project Set-up (including outfit), Common System Tasks, DACS, Lexicon

2

None

System Administrators

N/A

TM-2121

System Administration (Advanced)

Extract Databases, Data Access Control, PML encryption, IPR Data Base Encrption.

2

System Administration (Basic)

System Administrators

N/A

TM-2123

Marine Drafting Administration

2

Marine Drafting

Draft Administration

TM-2254

Clash Manager Administration

TBC

2

System Administration, basic and System Administrators Advanced

N/A

Clash Manager

System Adminstrators

M41A

N/A

TBC

AVEVA Bocad Training Modules and Guides ISSUED

Module Training Guide Content Summary

Duration (Days)

Pre-requisites

AVEVA Bocad Basics 1

Understand basic concepts of AVEVA Bocad. Setup new projects. Understand the grid concept of AVEVA Bocad. Use and create different types of views. Understand and use different point types in the design process. Create and edit member within the model in different ways. Create and edit outline plates. Create welded and bolted connections.

5

None

Structural detailers and engineers

TM-7002

AVEVA Bocad Basics 2 (Steel)

Create advanced member types such as curved members and flashings. Understand and use advanced construction concepts such as copy and mirror, detailing members with help of the detailing box, sharing construction elements between projects via libraries. Work with pre-defined steel construction connections. Understand and use advanced functions of AVEVA Bocad, especially the marking, parts lists and the drawing production.

5

TM-7001

Structural detailers and engineers

TM-7003

AVEVA Bocad NC

Understand general handling concepts of AVEVA Bocad NC. Create common editing processes for parts within AVEVA Bocad NC.

1

None

Structural detailers

TM-7101

AVEVA Bocad Basics

AVEVA Bocad Fundamentals, User Interface Basics, General Utilities, Create objects, Modify objects, Create connections, Move-, Copy-, Mirror objects, exercises

2

None

Intended as an introduction and foundation for All New Users before taking other courses.

TM-7102

AVEVA Bocad Deliverables

Marking, Automatic drawings, Drawing lists, Nested drawings, Bills of material, Interfaces, BoView

1

TM-7103

AVEVA Bocad Advanced Utilities

Advanced marking, Marking status, Revision Nr, Revision list, update drawing, Automatic nesting, Special profiles, shared work, Interfaces

2

TM-7101 and TM-7102

Structural detailers and engineers

TM-7104

AVEVA Bocad Customisation

Letterboxes, Bills of Material, Bolts, Profiles, BoView

1

TM-7102

Structural detailers and engineers

TM-7200

Evalution (Onshore)

Understand basic concepts of AVEVA Bocad, Import a steel structure from Everything3D, Complete this model, Export the steel structure to Everything3D

3

None

TM-7201

Detailing (Onshore)

Creation of joints - interactive/ by using macros, Advanced member/connection, Checking tools, 3D Library, Exercises

2

TM-7101

Structural detailers and engineers

TM-7202

Specialisation (Onshore)

Basics in: Stairs&Rails, Cladding, Boedit

2

TM-7103

Structural detailers and engineers

Module ID

TM-7001

Module and Training Guide Title

Target Personnel

TM-7201 or TM-7301 or TM-7401 Structural detailers and engineers

Especially for PDMS and Everything3D users to get an overview of the product but also for any user who wants to discover Bocad-3D

Replacing Existing Training Modules

TM-7201 TM-7301 TM-7401

Block 3 Deliverables

Block 2 DETAILING Specifc for each Daymodule 3&4 Tips &Tricks for effective Day 5 - Output detailing (with repetitions)

TM-7102

Day 2 Rebuilding the sample model

Day 1 Exploring an existing model

Block 1 - BASICS Common to all modules Different by specifc model

TM-7101

Module ID Basic Training C = Common / SP = Specific / - = N/A One Week OnshoreOffshore Tower

C C C C C C C C SP C SP C C C C C C SP C C C C C C C C C SP C SP C C C C C C C C C C C C C C C SP C SP SP C C C C C C

SP SP SP

SP C SP SP C C C C C C C C C C SP C SP C C SP C C C C C C C SP C SP C C C C C C C C C C

Specific / - = N/A

Description Zoom, main views, additional views Fonts & Colors Iconbars Modifying the representation of objects in views Object properties and information about coherencies of connections Editing object properties including Search/Filter Save/Load model + automatic save Usage of Pick-Modes Grid and grid-modification Phases + Member Colors Creation and editing of profiles Creating Pick-Points Creation and editing of outline-plates Creation and editing of bolts and welds Move/Copy/Mirror objects Generation of plates -> similarity Profile vs. Outline-Plate Difference between Assembly, Single Member, Main- and Secondary Member Stretchen/Shorten to make main changes in completed construction Small excursion in automatic drawings (for motivation) Combining views, points and members effectively (exercises stiffener, beams, end-plates, head-plates and bottom-plates) Using joint-macros Checking tools (member/bolt clashing e.g.) 2D-Flashings, Gratings 3D-Flashings Slotted holes 3D Library Marking Interactive Drawings (nested drawing) Interactive list for GA-drawings Automatic Drawings BoPrint BoView/BoMat Interfaces? Keep some free time for special purpose

TM-7104

TM-7103

Block 3 Block 2 Block 1 - Advanced Specialisati Customisatio Utilities on n Day 3 Day 4 & 5 Customisatio Macros & Day 1 & 2 n Specifc Advanced Utilities (common Tools examples)

TM-7202 TM-7302 TM-7402

ModuleAdvanced TrainingC = Common / SP = Specific / - = N/A ID One Week OnshoreOffshore Tower C C C C C C C C C C C C C C C C C C SP SP C C C C C C C C C C C C C C C C C C SP -

C C C C C C C C C C C C C C C C C SP SP

Specific / - = N/A

Description Advanced Marking Revision Nr Marking Status Revision List Update Drawings Cladding Classification Automatic Nesting Special Profiles Import/Export vs. Shared Work Interfaces (NC/DSTV, VRML, ABSI, DWG/DXF, Mechanicad, IFC) Automatic Drawings Setup Catalogue Profiles Database Profiles, Bolts Titleblock Carcli Frame Clientdata Project Management Stairs&Rails Basics Cladding Basics BoEdit Basics Offshore Output Tools & Macros Specific Macros Table