Astm f2413

October 7, 2022 | Author: Anonymous | Category: N/A
Share Embed Donate


Short Description

Download Astm f2413...

Description

 

ASTM F2413

Standards Tracker   Tracker

Abstract 

Standards Subscriptions   Subscriptions

This specification covers the minimum design, performance, testing, and classification requirements, and prescribes fit, function, and performance criteria for  for  footwear  footwear designed to be worn to provide protection against a variety of workplace hazards that can potentially result in injury. It is not the intention of this specification to serve as a detailed manufacturing or purchasing specification, but can be referenced in purchase contracts to ensure that minimum performance requirements are met. Footwear conforming to this specification shall meet the performance requirements for the following: impact resistance for the toe area of footwear; compression resistance for the toe area of footwear; metatarsal protection that reduces the chance of injury to the metatarsal bones at the top of the foot; conductive properties which reduce hazards that may result from static electricity buildup, and reduce the possibility of ignition of  explosives and volatile chemicals; electric shock resistance; static dissipative (SD) properties to reduce hazards due to excessively low footwear resistance that may exist where SD footwear is required; puncture resistance of footwear bottoms; chain saw cut resistance; and dielectric insulation. This abstract is a brief summary of the referenced standard. It is informational informational only and not an official part of the standard; the full text of the standard  itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation representation that the contents of  this abstract are accurate, complete or up to date.

1. Scope 

1.1 This specification covers minimum requirements for the design, performance, testing, and classification of footwear designed to provide protection against a variety of workplace hazards that can potentially result in injury. 1.2 The objective of this specification is to prescribe fit, function, and performance criteria for footwear that is intended to be worn to reduce injuries. 1.3 This specification is not intended to serve as a detailed manufacturing or purchasing specification, but can be referenced in purchase contracts to ensure that minimum performance requirements are met. 1.4 Controlled laboratory tests used to determine compliance with the performance requirements of this specification shall not be deemed as establishing performance levels for all situations to which individuals may be exposed. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health

Customers frequently also buy:  F2412   F2412

Related Standards:  F2412 F2412  

 

practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately) 

The documents listed below are referenced

within the subject standard but are not provided as part of the standard.  

ASTM Standards 

B117 B117  Practice for Operating Salt Spray (Fog) Apparatus F1116  Test Method for Determining Dielectric Strength of Dielectric Footwear F1116 F1117  F1117 Specification for Dielectric Footwear F1818  Specification for Foot Protection for Chainsaw Users F1818 F2412 F2412  Test Methods for Foot Protection Federal Standards 

CFR1910.136 Personal Protective Equipment-Occupational Foot Protection Canadian Standards Association Standard 

CAN/CSAZ195 Protective Footwear

Index Terms 

chain saw protection; conductive footwear; dielectric; electric shock resistance (EH); foot protection; impact resistance; metatarsal protection; protective footwear; puncture resistance; safety footwear electrical hazard; static dissipative (ESD); ICS Number Code 13.340.50 (Leg and foot protection)

DOI: 10.1520/F2413-05

ASTM International is a member of CrossRef.

ASTM F2413 (Security System Standards and Pedestrian /  Walkway Safety Standards) Standards   Citing ASTM Standards [Back to Top] Top]  

 

Standards   Back to  to Security System Standards and Pedestrian / Walkway Safety Standards Home  ASTM  | Site Map Map  | Support Support  | Contact Contact  | Web/IP Policies  Policies | Link to Us  Us | Copyright/Permissions  Copyright/Permissions   Home | About ASTM Standards - Petroleum Standards  Construction Standards  Standards -Steel Standards Standards  - Plastics Standards  Standards - Environmental Standards Standards  - Metals Standards 

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF