Designation: D3311 – 09a
An American National Standard
Standard Specification for
Drain, Waste, and Vent (DWV) Plastic Fittings Patterns1 This standard is issued under the fixed designation D3311; the number immediately following the designation indicates the year of original origin al adoption or, in the case of revis revision, ion, the year of last revision. revision. A number in paren parenthese thesess indicates the year of last reappr reapproval. oval. A superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
D2661 Specification for AcrylonitrileAcrylonitrile-Butadiene-Sty Butadiene-Styrene rene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fitting Fittingss D2665 Specification for Poly(Vinyl Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
1. Sco Scope* pe* 1.1 This specification specification prov provides ides standard fitting geometries and laying lengths for plastic fittings intended for use in drain, waste, and vent applications. (See Specifications D2661 and D2665..) D2665 1.2 Fitting Fittingss meeting the requirements requirements of this standard standard specification are designed for use with outside diameter controlled pipe. The inside diameter can vary significantly as the wall thickne thic kness ss and out outsid sidee dia diamet meter er var varies ies and the theref refore ore is not suitable for use as a fitting socket. 1.3 The values stated in inch-poun inch-pound d units are to be regar regarded ded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only
3. Requireme Requirements nts 3.1 Fittings Fittings shall con confor form m to the geo geometr metries ies and laying lengths as shown in Tables in Tables 1-46 and 1-46 and Fig. Fig. 1. 1. Tolerances shall be 1 16 in. unless otherwise specified. 6 ⁄ 16 3.2 Spigo Spigott and hub dimen dimensions sions shall conform conform to the requi requirerements of the referencing standard. 3.3 The exact outside outside shape of a fitting is not determined by
and are not considered standard.
the outline drawings shown in this specification but rather by the socket dimensions, wall thickness requirements, waterway, laying lengths, and any other critical dimensions that may be specified. 3.4 The pitch of sockets sockets for patterns with 90° 90° angles (except (except 1 vent fittings) shall be ⁄ 4 in./ft or 1° 12 min. 3.5 On double reducing reducing sanitary sanitary tees, the G2 dimension on branches will be calculated on the larger size and centerlines shall remain the same for both branches. 3.6 All other dimens dimensions, ions, materials and prop property erty requirements shall be in conformance with the referencing standard.
2. Referenc Referenced ed Documents Documents 2.1 ASTM Standards:2
1
This specification is under the jurisdiction of ASTM Committee F17 Committee F17 on on Plastic Piping Systems Systems and is the direct respo responsibil nsibility ity of Subc Subcommitt ommittee ee F17.63 F17.63 on on DWV. Current Curre nt editi edition on appro approved ved Aug. 1, 2009. Published Published August 2009. Originally Originally approved in 1974. Last previous edition approved in 2009 as D3311 – 09. DOI: 10.1520/D3311-09A. 2 For refere referenced nced ASTM stand standards, ards, visit the ASTM websi website, te, www www.astm .astm.org .org,, or contact ASTM Customer Service at
[email protected]. For Annual Book of ASTM Standards volume information, refer to the standard’s Document Summary page on the ASTM website.
4. Keyw Keywords ords 4.1 DWV DWV;; fitting fittings; s; plastic; Schedule 40; thermo thermoplastic plastic
*A Summary of Changes section appears at the end of this standard. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
1
D3311 – 09a ABLE E 1 Ben Bends, ds, in. in. (mm) (mm) TABL
⁄ 4 Bend
1
Nominal Pipe Size 1 ⁄ 4 11 ⁄ 2 2 3 4 6 8
1
Long Sweep 1 ⁄ 4 Bend
⁄ 8 Bend
1
G
G
G
1 ⁄ 16 16 (40) 13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98) 5 (min) (127) 6 (152)
2 ⁄ 4 (57) 23 ⁄ 4 (70) 31 ⁄ 4 (83) 41 ⁄ 16 16 (103) 415 ⁄ 16 16 (125) 9 (229) ...
1 (25) 11 ⁄ 8 (29) 11 ⁄ 2 (38) 13 ⁄ 4 (44) 23 ⁄ 16 16 (56) 2 (min) (51) 21 ⁄ 16 16 (52)
9
1
⁄ 6 Bend
1
⁄ 16 16 Bend
1
G
G
⁄ 8 (22) 1 (25) 15 ⁄ 16 16 (33) 111 ⁄ 16 16 (43) 21 ⁄ 16 16 (52) 33 ⁄ 8 (86) ...
7
⁄ 16 16 (11) ⁄ 2 (13) 11 ⁄ 16 16 (17) 13 ⁄ 16 16 (21) 1 (25) 11 ⁄ 2 (38) 11 ⁄ 2 (38) 7
1
TABLE 2 Bends with with Inlets, Inlets, in. in. (mm)
⁄ 4 Bend with Low Heel Inlet
1
Nominal Pipe Size
G 1
1
2
33by by33by by12 ⁄ 4 by 4 by 2
16
31 ⁄ ⁄ 16 (78) 3 16 (78) 37 ⁄ 8 (98)
Long-Sweep 1 ⁄ 4 Bend with Low Heel Inlet
N 3
16
4 (106) 47 ⁄ ⁄ 16 16 (113) 57 ⁄ 16 16 (138)
G 1
N
G
N
GG
⁄ 16 (121) 4415 ⁄ 16 (125) 6 (152)
... 41 ⁄ 16 16 (103) ...
55 ⁄ 8. (.1.43) ...
.. 21 ⁄ 4. (57) ...
3
16
41 ⁄ ⁄ 16 (103) 4 16 (103) 415 ⁄ 16 16 (125)
2
Long-Sweep 1 ⁄ 4 Bend with High Heel Inlet
4
D3311 – 09a Sanitary ary Tees, Tees, 45° Wyes, Combination Combination Wyes and 1 ⁄ 8 Bends, in. (mm) TABLE 3 Sanit
Sanitary Tee Single and DoubleA
Nominal Pipe Size 11 ⁄ 4 11 ⁄ 2 2 3 4 6 8
GN
GJ
GN
GJ
⁄ 4 (19) 1 (25) 13 ⁄ 8 (35) 113 ⁄ 16 16 (46) 21 ⁄ 4 (57) 31 ⁄ 2 (89) 41 ⁄ 2 (114)
19 ⁄ 16 16 (40) 13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98) 5 (127) 6 (152)
11 ⁄ 16 16 (27) 11 ⁄ 8 (29) 13 ⁄ 8 (35) 15 ⁄ 8 (41) 17 ⁄ 8 (48) 13 ⁄ 4 (44) 23 ⁄ 8 (60)
29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 35 ⁄ 8 (92) 5 (127) 63 ⁄ 8 (162) 87 ⁄ 16 16 (214) 113 ⁄ 4 (298)
3
45° Wye, Single and Double
Combination Combin ation Wye and 1 / 8 Bend Single Single and and Double GN
GJ
⁄ 16 16 (11) 1 ⁄ 2 (13) 1 (25) 11 ⁄ 8 (29) 113 ⁄ 16 16 (46)
215 ⁄ 16 16 (75) 33 ⁄ 8 (86) 41 ⁄ 2 (114) 65 ⁄ 16 16 (160) 85 ⁄ 8 (219)
B
B
B
B
7
A
Non-reducing double sanitary tees are for vent use only. Combination wye and 1 ⁄ 8 bend is assembled from two standard fittings.
B
TABLE 4 Reduci Reducing ng Sanitary Sanitary Tees, 45° Wyes, Wyes, Combination Combination Wyes, and 1 ⁄ 8 Bends, in. (mm)
Sanitary Tee, Reducing Single and Double A
Nominal Pipe Size
G1
G2 B
1 ⁄ 2 by 1 ⁄ 4 by 1 ⁄ 4 ⁄ 16 16 (17) 11 ⁄ 2 by 11 ⁄ 4 by 11 ⁄ 2 1 (25) 11 ⁄ 2 by 11 ⁄ 2 by 11 ⁄ 4 13 ⁄ 16 16 (21) 2 by 11 ⁄ 4 by 11 ⁄ 2 13 ⁄ 16 16 (30) 2 by 11 ⁄ 2 by 11 ⁄ 2 13 ⁄ 16 16 (30) 1
2 2 2 3 3 3 4 4 4 6 6 8 8
by by by by by by by by by by by by by
1
1
1
1 ⁄ 2 by12 2 by 1 ⁄ 4 2 by 1 1 ⁄ 2 3 by 1 1 ⁄ 2 3 by 2 3 by 2 by 1 1 ⁄ 2 4 by 1 1 ⁄ 2 4 by 2 4 by 3 6 by 3 6 by 4 8 by 4 8 by 6
11
3
1 ⁄ 8 (35) 13 ⁄ 16 16 (30) 13 ⁄ 16 16 (30) 15 ⁄ 16 16 (24) 13 ⁄ 16 16 (30) B 15 ⁄ 16 16 (24) B 11 ⁄ 16 16 (27) 1 1 ⁄ 8 (29) 13 ⁄ 4 (44) — B 23 ⁄ 16 16 (56) 5 2 ⁄ 8 (67) 39 ⁄ 16 16 (90)
G3 B
1 ⁄ 2 (38) 13 ⁄ 4 (44) 111 ⁄ 16 16 (43) 115 ⁄ 16 16 (49) 115 ⁄ 16 16 (49) 1
5
2 ⁄ 16 (59) 115 ⁄ 16 16 (49) 115 ⁄ 16 16 (49) 13 ⁄ 4 (44) 21 ⁄ 8 (54) B 21 ⁄ 16 16 (52) 2 (51)B 21 ⁄ 16 16 (52 ) 3 (76) — 35 ⁄ 8 (92)B 41 ⁄ 8 (105) 413 ⁄ 16 16 (122)
G4 B
1 ⁄ 16 16 (43) 13 ⁄ 4 (44) 113 ⁄ 16 16 (46) 23 ⁄ 16 16 (56) 23 ⁄ 16 16 (56) 11
5
45° Wye, Reducing Single and Double
23 ⁄ 16 (59) 2 ⁄ 16 16 (56) 23 ⁄ 16 16 (56) 29 ⁄ 16 16 (65) 27 ⁄ 8 (73) B 27 ⁄ 16 16 (62) 31 ⁄ 4 (83)B 35 ⁄ 16 16 (84) 39 ⁄ 16 16 (90) — B 45 ⁄ 16 16 (110) 1 5 ⁄ 4 (133) 51 ⁄ 2 (140)
B
1 ⁄ 16 16 (43) 13 ⁄ 4 (44) 113 ⁄ 16 16 (46) 23 ⁄ 16 16 (56) 23 ⁄ 16 16 (56) 11
23 ⁄ 16 (50) 2 ⁄ 16 16 (56) 23 ⁄ 16 16 (56) 29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 21 ⁄ 2 (64)B 31 ⁄ 4 (83)B 35 ⁄ 16 16 (84) 39 ⁄ 16 16 (90) — B 45 ⁄ 16 16 (110) 51 ⁄ 4 (133) 51 ⁄ 2 (140)
G1
G2
G3
G1
G2
G3
— — — — 3 ⁄ 4 (19)B
— — — — B 213 ⁄ 16 16 (71)
— — — — B 215 ⁄ 16 16 (75)
— — 1 ⁄ 2 (13) — 9 ⁄ 16 16 (14)
— — 31 ⁄ 4 (83) — 311 ⁄ 16 16 (94)
— — 33 ⁄ 16 16 (81) — 35 ⁄ 8 (92)
B
5
Combination Wye and 1 ⁄ 8 Bend Reducing Single and Double
1 (25) — 11 ⁄ 16 16 (27) 1 ⁄ 2 (13) 7 ⁄ 8 (22) — 0 (0)B 3 ⁄ 8 (10) 11 ⁄ 16 16 (27) B 3 ⁄ 16 16 (5) B 3 ⁄ 16 16 (5) 3 ⁄ 8 (10) 1 (25)
A
Non-reducing double sanitary tees are for vent use only. This dimension is a minimum with no upper maximum limit. C Combination Wye and 1 ⁄ 8 bend is assembled from two standard fittings. B
3
1
B
3
B
3 ⁄ 2 (89) 3 ⁄ 8 (86) — — 35 ⁄ 16 16 (84) 37 ⁄ 16 16 (87) 33 ⁄ 4 (95) 45 ⁄ 16 16 (110) 1 4 ⁄ 8 (105) 45 ⁄ 8 (117) — — B B 35 ⁄ 16 16 (84) 315 ⁄ 16 16 (100) 11 9 4 ⁄ 16 16 (119) 5 ⁄ 16 16 (141) 59 ⁄ 16 16 (141) 6 (152) B B 615 ⁄ 16 16 (176) 77 ⁄ 16 16 (189) B B 611 ⁄ 16 16 (170) 77 ⁄ 16 16 (189) 5 5 7 ⁄ 8 (194) 8 ⁄ 8 (219) 91 ⁄ 2 (241) 913 ⁄ 16 16 (249)
1 (25) — 9 ⁄ 16 16 (14) 1 ⁄ 8 (3) 7 ⁄ 16 16 (11) — — 5 ⁄ 16 16 (8) 11 ⁄ 16 16 (27) B 11 ⁄ 16 16 (17) B 9 ⁄ 16 16 (14)
1
1
4 ⁄ 2 (114) 4 ⁄ 2 (114) — — 311 ⁄ 16 16 (170) 35 ⁄ 8 (92) 37 ⁄ 16 16 (87) 41 ⁄ 4 (108) 3 4 ⁄ 4 (121) 55 ⁄ 16 16 (135) — — — — 43 ⁄ 4 (121) 57 ⁄ 8 (149) 63 ⁄ 8 (162) 67 ⁄ 8 (175) B B 713 ⁄ 16 16 (198) 813 ⁄ 16 16 (224) B B 713 ⁄ 16 16 (198) 815 ⁄ 16 16 (227)
C
C
C
C
C
C
D3311 – 09a Single, and and Double, Double, in. (mm) TABLE 5 60° Wyes, Single,
Nominal Pipe Size
GN
GJ
Nominal Pipe Size
11 ⁄ 8 (40) 13 ⁄ 8 (37) 15 ⁄ 8 (37)
27 ⁄ 8 (73) 35 ⁄ 8 (92) 5 (127)
2 by 2 by 11 ⁄ 2 3 by 3 by 11 ⁄ 2 3 by 3 by 2
11 ⁄ 2 2 3
TABLE 8 60° Reducing Reducing Wyes, Single Single and Double, Double, in. (mm)
TABLE 6 Fixtu Fixture re Tees, Tees, in. (mm) (mm)
Nominal Pipe Size 1 ⁄ 2 2 by 11 ⁄ 2 by 11 ⁄ 2 2 by 2 by 1 1 ⁄ 2 1
G1
G2
G3
11 ⁄ 16 16 (27) 1 ⁄ 2 (13) 7 ⁄ 8 (22)
37 ⁄ 16 16 (87) 33 ⁄ 4 (95) 41 ⁄ 8 (105)
37 ⁄ 16 16 (87) 45 ⁄ 16 16 (110) 45 ⁄ 8 (117)
TABLE 9 Molded Nippl Nipples, es, in. (mm) (mm)
G1
G2
G3
1 ⁄ 16 16 (40) 17 ⁄ 16 16 (37) 17 ⁄ 16 16 (37)
1 ⁄ 16 16 (30) 13 ⁄ 16 16 (30) 15 ⁄ 16 16 (33)
1 ⁄ 4 (32) 11 ⁄ 4 (32) 11 ⁄ 4 (32)
9
3
Nominal Pipe Size
1
11 ⁄ 2 2 3
OD
ID
1.900 2.375 3.500
1.500 1.939 2.900
Length ⁄ 2-in. increments from close to 18 in. long
1
TABLE 7 Cleano Cleanout ut Tees, Tees, in. (mm) (mm) TABLE 10 Ven Ventt Tees Tees and 1 ⁄ 4 Bend Vents, in. (mm)
Nominal Pipe Size 11 ⁄ 2 2 3 4
G 13 ⁄ 16 16 (30) 11 ⁄ 2 (38) 17 ⁄ 8 (48) 21 ⁄ 2 (64)
I
Nominal Pipe Size
⁄ 8 (16) 5 ⁄ 8 (16) 3 ⁄ 4 (19) 7 ⁄ 8 (22) 5
11 ⁄ 4 11 ⁄ 2 2 3 4
4
Vent Tee
1 (25) 13 ⁄ 16 16 (30) 11 ⁄ 2 (38) 17 ⁄ 8 (48) 21 ⁄ 2 (64)
⁄ 4 Bend Vent
1
1 (25) 13 ⁄ 16 16 (30) 11 ⁄ 2 (38) 17 ⁄ 8 (48) 21 ⁄ 2 (64)
D3311 – 09a Reducing ng Vent Tees, Tees, Single, and Double, Double, in. (mm) TABLE 11 Reduci
Nominal Pipe Size 2 by 11 ⁄ 2 by 11 ⁄ 2 2 by 2 by 1 1 ⁄ 2 3 by 3 by 1 1 ⁄ 2 3 by 3 by 2
GN 13 ⁄ 16 16 (30) 13 ⁄ 16 16 (30) 13 ⁄ 16 16 (30) 11 ⁄ 2 (38)
GJ 11 ⁄ 2 (38) 11 ⁄ 2 (38) 17 ⁄ 8 (48) 17 ⁄ 8 (48)
TABLE 12 12 Bushi Bushings, ngs, in. in. (mm) (mm)
Style 1 (a and b)A
Nominal Pipe Size 1 ⁄ 2 by 1 ⁄ 4 2 by 11 ⁄ 4 2 by 11 ⁄ 2 3 by 11 ⁄ 2 3 by 2 4 by 2 4 by 3 6 by 3 6 by 4 8 by 4 8 by 6 1
L
1
⁄ 16 16 (24) 11 ⁄ 16 16 (27) 11 ⁄ 16 16 (27) 13 ⁄ 4 (44) 13 ⁄ 4 (44) 2 (51) 2 (51) 35 ⁄ 16 16 (84) 31 ⁄ 2 (89) 45 ⁄ 8 (117) 45 ⁄ 8 (117)
Style 2
CM
15
⁄ 16 16 (5) ⁄ 16 16 (8) 5 ⁄ 16 16 (8) 1 (25) 7 ⁄ 8 (22) 11 ⁄ 8 (29) 1 ⁄ 2 (13) 13 1 ⁄ 16 16 (97) 13 ⁄ 4 (44) 27 ⁄ 8 (73) 15 ⁄ 8 (41) 3
5
R
L1
CM
N
L
⁄ 16 16 (5) ⁄ 16 16 (5) 3 ⁄ 16 16 (5) 1 ⁄ 4 (6) 1 ⁄ 4 (6) 1 ⁄ 4 (6) 1 ⁄ 4 (6) 5 ⁄ 16 16 (8) 1 ⁄ 2 (13) 5 ⁄ 8 (16) 5 ⁄ 8 (16)
... ... ... 13 ⁄ 4 (44) 13 ⁄ 4 (44) 2 (51) 2 (51) ... ... ... ...
... ... ... 3 ⁄ 4 (19) 7 ⁄ 8 (22) 7 ⁄ 8 (22) 11 ⁄ 2 (38) ... ... ... ...
... ... ... 1 ⁄ 4 (6) 1 ⁄ 4 (6) 1 ⁄ 4 (6) 1 ⁄ 4 (6) ... ... ... ...
1 (25) 11 ⁄ 8 (29) 13 ⁄ 32 32 (28) 11 ⁄ 2 (38) 15 ⁄ 8 (41) ... ... ... ... ... ...
3 3
Style 3
A
No less than four ribs shall be used to support walls.
5
D3311 – 09a Couplings, lings, Adapt Adapters, ers, in. (mm) TABLE 13 Coup
Coupling
Nominal Pipe Size D 1 ⁄ 4 11 ⁄ 2 2 3 4 6 8 1
1.600 to 1.840 to 2.320 to 3.440 to 4.440 to 6.550 to 8.655 to
Female Adapter N , min
1.380 1.610 2.067 3.068 4.026 6.065 8.610
⁄ 8 (3) ⁄ 8 (3) 1 ⁄ 8 (3) 3 ⁄ 16 16 (5) 1 ⁄ 4 (6) 1 ⁄ 4 (6) 1 ⁄ 4 (6)
1
1
Male Adapter
N , min ⁄ 4 (6) ⁄ 4 (6) 1 ⁄ 4 (6) 5 ⁄ 16 16 (8) 11 ⁄ 32 32 (9) ... ...
1
1
N , min
⁄ 16 16 (5) ⁄ 16 16 (5) 3 ⁄ 16 16 (5) 3 ⁄ 8 (10) 3 ⁄ 8 (10) ... ... 3
A, max 1.290 (32.77) 1.552 (39.42) 2.067 (52.50) 3.068 (77.93) 4.026 (102.26) ... ...
3
TABLE 14 14 Pipe Increaser Increasers, s, in. (mm)
Nominal Pipe Size 11 ⁄ 4 by 11 ⁄ 2 11 ⁄ 2 by 2 11 ⁄ 2 by 3 2 by 3 2 by 4 3 by 4
N , min
6
⁄ 32 32 (10) ⁄ 32 32 (13) 13 ⁄ 32 32 (28) 7 ⁄ 8 (22) 13 ⁄ 8 (35) 15 ⁄ 16 16 (24) 13 17
Female Fitting Adapter
N , min ⁄ 32 32 (4) ⁄ 32 32 (4) 5 ⁄ 32 32 (4) 7 ⁄ 32 32 (6) 1 ⁄ 4 (6) ... ...
5
5
D3311 – 09a Trap ap Adapters, Adapters, in. in. (mm) TABLE 15 Tr
Without stop
With Stop
Nominal Pipe Size
N , min
11 ⁄ 4 11 ⁄ 2 2 11 ⁄ 4 by 11 ⁄ 2
⁄ 16 16 (5) ⁄ 16 16 (5) 3 ⁄ 16 16 (5) 3 ⁄ 16 16 (5)
3
3
A, min 1.250 1.500 2.000 1.250
(32) (38) (51) (32)
TABLE TA BLE 16 Pipe Plugs, Plugs, in. in. (mm)
Nominal Pipe Size 11 ⁄ 4 11 ⁄ 2 2 21 ⁄ 2 3 31 ⁄ 2 4 6 8
I
W
Q
⁄ 2 (13) ⁄ 8 (16) 5 ⁄ 8 (16) 3 ⁄ 4 (19) 3 ⁄ 4 (19) 3 ⁄ 4 (19) 7 ⁄ 8 (22) 1 (25) 13 ⁄ 8 (35)
1 (25) 13 ⁄ 8 (35) 13 ⁄ 8 (35) 11 ⁄ 2 (38) 13 ⁄ 4 (44) 13 ⁄ 4 (44) 17 ⁄ 8 (48) 2 (51) 23 ⁄ 8 (60)
1 (25) 1 (25) 11 ⁄ 4 (32) 11 ⁄ 4 (32) 15 ⁄ 8 (41) 15 ⁄ 8 (41) 2 (51) 21 ⁄ 4 (32) 31 ⁄ 2 (89)
1 5
7
D3311 – 09a ABLE E 17 Hub Hubs, s, in. (mm) (mm) TABL
Nominal Pipe Size
2 3 4 Reducing 4 by 3
A
C
... 3.448 (87.58) 4.493 (114.12) 4.493 (114.12)
... 1 ⁄ 16 16 (43) 115 ⁄ 16 16 (49) 115 ⁄ 16 16 (49) 11
N
AJ
CJ
... ⁄ 16 16 (8) 11 ⁄ 32 32 (9) 5 ⁄ 16 16 (8)
2.94 (74.7) 3.94 (100.1) 4.94 (125.5) 4.94 (125.5)
23 ⁄ 8 (60) 25 ⁄ 8 (67) 27 ⁄ 8 (73) 27 ⁄ 8 (73)
5
N
⁄ 8 (10) ⁄ 16 16 (11) 1 ⁄ 2 (13) 7 ⁄ 16 16 (11) 3
7
TABLE 18 Spigo Spigots, ts, in. in. (mm) (mm)
Nominal Pipe Size 2 3 4
L2 , min 31 ⁄ 2 (89) 33 ⁄ 4 (95) 4 (102)
L1,, min L1 45 ⁄ 8 (117) 55 ⁄ 8 (143) 61 ⁄ 8 (156)
L3 , min ⁄ 8 (10) ⁄ 8 (10) 3 ⁄ 8 (10)
3
3
8
M max
min
2.75 (69.9) 3.88 (98.6) 4.88 (124.0)
2.63 (66.8) 3.63 (92.2) 4.63 (117.6)
AN 2.00 (50.8) 3.00 (76.2) 4.00 (101.6)
D3311 – 09a Reducing ing Spigots, Spigots, in. in. (mm) TABLE 19 Reduc
Nominal Pipe Size
2 by 11 ⁄ 2 3 by 11 ⁄ 2 3 by 2 4 by 2 4 by 3
L2 min min
L1 min L1 min
31 ⁄ 2 (89) 33 ⁄ 4 (95) 33 ⁄ 4 (95) 4 (102) 4 (102)
41 ⁄ 4 (108) 41 ⁄ 2 (114) 45 ⁄ 8 (117) 47 ⁄ 8 (124) 51 ⁄ 2 (140)
M
L3 min min ⁄ 8 (10) ⁄ 8 (10) 3 ⁄ 8 (10) 3 ⁄ 8 (10) 3 ⁄ 8 (10)
3
3
max
min
2.75 (69.9) 3.88 (98.6) 3.88 (98.6) 4.88 (124.0) 4.88 (124.0)
2.63 (66.8) 3.63 (92.2) 3.63 (92.2) 4.63 (117.6) 4.63 (117.6)
AJ 2.00 (50.8) 3.00 (76.2) 3.00 (76.2) 4.00 (101.6) 4.00 (101.6)
TABL ABLE E 20 P Traps Traps,, in. (mm) (mm)
Nominal Pipe Size 11 ⁄ 4 11 ⁄ 2 2 3 4
min GJ min GJ 41 ⁄ 8 (105) 47 ⁄ 32 32 (107) 71 ⁄ 4 (184) 87 ⁄ 16 16 (214) 1013 ⁄ 16 16 (275)
min GGJ min GGJ
min GGN min GGN
33 ⁄ 8 (86) 35 ⁄ 8 (92) 41 ⁄ 16 16 (103) 65 ⁄ 16 16 (160) 77 ⁄ 8 (200)
3 (76) 3 (76) 5 (127) 61 ⁄ 4 (159) 81 ⁄ 16 16 (205)
9
min GN min GN 13 ⁄ 8 (35) 13 ⁄ 8 (35) 21 ⁄ 4 (57) 25 ⁄ 8 (67) 37 ⁄ 16 16 (87)
min R min R 15 ⁄ 8 (41) 15 ⁄ 8 (41) 21 ⁄ 2 (64) 31 ⁄ 8 (79) 41 ⁄ 16 16 (103)
D3311 – 09a Double le Fixture Fixture Fitting, Fitting, in. (mm) (mm) TABLE 21 Doub
Nominal Pipe Size 1 ⁄ 2 2 3 Reducing: 2 by 11 ⁄ 2 by 11 ⁄ 2 by 11 ⁄ 2 2 by 11 ⁄ 2 by 2 by 2 2 by 11 ⁄ 2 by 2 by 1 1 ⁄ 2 1
G1
G2
G3
G4
3
⁄ 8 (10) ⁄ 8 (10) 1 ⁄ 2 (13)
3 ⁄ 16 16 (90) 49 ⁄ 16 16 (116) 63 ⁄ 4 (171)
2 ⁄ 16 16 (62) 31 ⁄ 16 16 (78) 41 ⁄ 2 (114)
2 ⁄ 16 16 (62) 31 ⁄ 16 16 (78) 41 ⁄ 2 (114)
⁄ 8 (10) ⁄ 8 (10) 3 ⁄ 8 (10)
39 ⁄ 16 16 (90) 49 ⁄ 16 16 (116) 49 ⁄ 16 16 (116)
27 ⁄ 16 16 (62) 31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78)
27 ⁄ 16 16 (62) 31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78)
3
9
3
3
7
7
TABLE 22 Doub Double le Fixture Fixture Fitting, Fitting, in. (mm) (mm)
Interchanges with Double Fixture Fittings Double Fixture Fitting
Nominal Pipe Size 11 ⁄ 2 2 3
G1
G4
31 ⁄ 8 (79) 41 ⁄ 4 (108) 61 ⁄ 4 (159)
211 ⁄ 16 16 (68) 31 ⁄ 2 (89) 415 ⁄ 16 16 (125)
⁄ 8 (10)
3 ⁄ 8 (79)
⁄ 8 (10) ⁄ 8 (10) 1 ⁄ 2 (13)
41 ⁄ 4 (108) 41 ⁄ 4 (108) 61 ⁄ 4 (159)
3
G3
⁄ 8 (10) ⁄ 8 (10) 1 ⁄ 2 (13) 3
G2
R1
R2
211 ⁄ 16 16 (68) 31 ⁄ 2 (89) 415 ⁄ 16 16 (125)
35 ⁄ 8 (92) 41 ⁄ 2 (114) 65 ⁄ 8 (168)
35 ⁄ 8 (92) 41 ⁄ 2 (114) 65 ⁄ 8 (168)
2 ⁄ 8 (73)
27 ⁄ 8 (73)
35 ⁄ 8 (92)
35 ⁄ 8 (92)
27 ⁄ 8 (73) 31 ⁄ 2 (89) 415 ⁄ 16 16 (125)
31 ⁄ 2 (69) 31 ⁄ 2 (89) 415 ⁄ 16 16 (125)
35 ⁄ 8 (92) 41 ⁄ 2 (114) 65 ⁄ 8 (168)
41 ⁄ 2 (114) 41 ⁄ 2 (114) 65 ⁄ 8 (168)
Reducing 2 by 11 ⁄ 2 2 by 2 by 3 by
1 ⁄ 2 by 1 ⁄ 2 by 1
1
11 ⁄ 2 by 11 ⁄ 2 by 2 11 ⁄ 2 by 2 by 2 2 by 3 by 3
3
3 3
1
7
10
D3311 – 09a Double Long Turn Turn Tee, Tee, in. (mm) TABLE 23 Single and Double
Interchanges Interc hanges with Combin Combination ation Wye 1 / 8 Bend Single and Double Long Turn Tee
Nominal Pipe Size 11 ⁄ 4 11 ⁄ 2 2 3 4 6
G1
G2
N
R
⁄ 8 (10) ⁄ 16 16 (11) 11 ⁄ 16 16 (17) 11 ⁄ 16 16 (27) 11 ⁄ 2 (38) 21 ⁄ 2 (64)
37 ⁄ 16 16 (87) 315 ⁄ 16 16 (100) 51 ⁄ 8 (130) 79 ⁄ 16 16 (192) 10 (254) 153 ⁄ 8 (391)
31 ⁄ 16 16 (78) 31 ⁄ 2 (89) 47 ⁄ 16 16 (113) 61 ⁄ 2 (165) 81 ⁄ 2 (216) 127 ⁄ 8 (327)
43 ⁄ 4 (121) 57 ⁄ 8 (149) 7 (178) 101 ⁄ 8 (257) 131 ⁄ 4 (337) 19 (483)
3
7
TABLE 24 Single and Double Double Long Turn Turn Tee Tee Reducing, Reducing, in. (mm)
Interchanges Interc hanges with Reduci Reducing ng Combin Combination ation Wye 1 / 8 Bend Single and Double Long Turn Tee Reducing Nominal Pipe Size
11 ⁄ 2 by 11 ⁄ 4 by 11 ⁄ 4 11 ⁄ 2 by 11 ⁄ 2 by 11 ⁄ 4 2 by 11 ⁄ 2 by 11 ⁄ 2 2 by 11 ⁄ 2 by 2 2 by 2 by 1 1 ⁄ 4 2 by 2 by 1 1 ⁄ 2 3 by 3 by 1 1 ⁄ 2 3 by 3 by 2 4 by 4 by 1 1 ⁄ 2 4 by 4 by 2 4 by 4 by 3 6 by 6 by 2 6 by 6 by 3 6 by 6 by 4 6 by 6 by 5
G1
G3
N
G2
R
⁄ 8 (10) ⁄ 8 (10) 7 ⁄ 16 16 (11) 11 ⁄ 16 16 (17) 3 ⁄ 8 (10) 7 ⁄ 16 16 (11) 7 ⁄ 16 16 (11) 11 ⁄ 16 16 (17) 3 ⁄ 8 (10) 5 ⁄ 8 (16) 11 ⁄ 16 16 (27) 9 ⁄ 16 16 (14) 15 ⁄ 16 16 (24) 11 ⁄ 2 (38) 2 (51)
35 ⁄ 8 (92) 35 ⁄ 8 (92) 43 ⁄ 16 16 (107) 51 ⁄ 8 (130) 313 ⁄ 16 16 (97) 43 ⁄ 16 16 (102) 43 ⁄ 4 (121) 511 ⁄ 16 16 (128) 53 ⁄ 16 16 (132) 61 ⁄ 8 (156) 81 ⁄ 16 16 (205) 71 ⁄ 8 (181) 91 ⁄ 16 16 (230) 11 (279) 135 ⁄ 16 16 (338)
31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 31 ⁄ 2 (89) 47 ⁄ 16 16 (113) 31 ⁄ 16 16 (78) 31 ⁄ 2 (89) 31 ⁄ 2 (89) 47 ⁄ 16 16 (113) 39 ⁄ 16 16 (90) 41 ⁄ 2 (114) 61 ⁄ 2 (165) 49 ⁄ 16 16 (116) 65 ⁄ 8 (168) 81 ⁄ 2 (216) 103 ⁄ 4 (273)
37 ⁄ 16 16 (87) 37 ⁄ 16 16 (87) 315 ⁄ 16 16 (100) 51 ⁄ 8 (130) 37 ⁄ 16 16 (87) 315 ⁄ 16 16 (100) 315 ⁄ 16 16 (100) 51 ⁄ 8 (130) 315 ⁄ 16 16 (100) 51 ⁄ 8 (130) 79 ⁄ 16 16 (192) 51 ⁄ 8 (130) 79 ⁄ 16 16 (192) 10 (254) 123 ⁄ 4 (324)
43 ⁄ 4 (121) 43 ⁄ 4 (121) 57 ⁄ 8 (200) 7 (178) 43 ⁄ 4 (121) 57 ⁄ 8 (149) 57 ⁄ 8 (149) 7 (178) 57 ⁄ 8 (149) 7 (178) 101 ⁄ 8 (257) 7 (178) 101 ⁄ 8 (257) 131 ⁄ 4 (337) 16 (406)
3 3
11
D3311 – 09a Three-Way Way EII, EII, in. (mm) (mm) TABLE 25 Three-
Nominal Pipe Size
11 ⁄ 2 2 3 4 Reducing 2 by 11 ⁄ 2 by 11 ⁄ 2 (short) 3 by 2 by 3 2 by 11 ⁄ 2 by 11 ⁄ 2 (long)
G1
G2
G3
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
15 ⁄ 8 (41) 31 ⁄ 16 16 (78) 115 ⁄ 16 16 (49)
15 ⁄ 8 (41) 27 ⁄ 8 (73) 23 ⁄ 16 16 (56)
15 ⁄ 8 (41) 31 ⁄ 16 16 (78) 23 ⁄ 16 16 (56)
TABLE 26 Two Way Cleanou Cleanout, t, in. (mm) (mm)
Nominal Pipe Size
3 4
G 41 ⁄ 16 16 (103) 415 ⁄ 16 16 (125)
12
D3311 – 09a Sanitary ry Tees, Tees, with Side Inlet, Inlet, in. (mm) TABLE 27 Sanita
Nominal Pipe Size Left-Hand Side Inlet 11 ⁄ 2 by 11 ⁄ 2 by 11 ⁄ 2 by 11 ⁄ 2 2 by 2 by 1 1 ⁄ 2 by 11 ⁄ 2 3 by 3 by 2 by 1 1 ⁄ 2 3 by 3 by 2 by 2 3 by 3 by 3 by 1 1 ⁄ 2 3 by 3 by 3 by 2 4 by 4 by 4 by 2 Right-Hand Side Inlet 3 by 3 by 2 by 1 1 ⁄ 2 3 by 3 by 2 by 2 3 by 3 by 3 by 1 1 ⁄ 2 3 by 3 by 3 by 2 4 by 4 by 4 by 2 Side Inlet Both Sides 3 by 3 by 2 by 1 1 ⁄ 2 by 11 ⁄ 2 3 by 3 by 2 by 2 by 2 3 by 3 by 3 by 1 1 ⁄ 2 by 11 ⁄ 2 3 by 3 by 3 by 2 by 2 4 by 4 by 4 by 2 by 2
G1
G2
G3
G4
G5
23 ⁄ 4 (70) 311 ⁄ 16 16 (94) 35 ⁄ 16 16 (84) 35 ⁄ 16 16 (84) 47 ⁄ 8 (124) 47 ⁄ 8 (124) 61 ⁄ 8 (156)
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 21 ⁄ 8 (54) 21 ⁄ 8 (54) 31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 27 ⁄ 8 (73) 27 ⁄ 8 (73) 31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 35 ⁄ 16 16 (84)
13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 21 ⁄ 8 (54) 21 ⁄ 8 (54) 311 ⁄ 16 16 (94) 311 ⁄ 16 16 (94) 5 (127)
35 ⁄ 16 16 (84) 35 ⁄ 16 16 (84) 47 ⁄ 8 (124) 47 ⁄ 8 (124) 61 ⁄ 8 (156)
21 ⁄ 8 (54) 21 ⁄ 8 (54) 31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
27 ⁄ 8 (73) 27 ⁄ 8 (73) 31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 35 ⁄ 16 16 (84)
21 ⁄ 8 (54) 21 ⁄ 8 (54) 311 ⁄ 16 16 (94) 311 ⁄ 16 16 (94) 5 (127)
35 ⁄ 16 16 (84) 35 ⁄ 16 16 (84) 47 ⁄ 8 (124) 47 ⁄ 8 (124) 61 ⁄ 8 (156)
21 ⁄ 8 (54) 21 ⁄ 8 (54) 16 (78) 31 ⁄ 16 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
27 ⁄ 8 (73) 27 ⁄ 8 (73) 16 (78) 31 ⁄ 16 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 16 (65) 29 ⁄ 16 27 ⁄ 8 (73) 35 ⁄ 16 16 (84)
21 ⁄ 8 (54) 21 ⁄ 8 (54) 16 (94) 311 ⁄ 16 311 ⁄ 16 16 (94) 5 (127)
TABLE 28 Sanit Sanitary ary Tee, Tee, Double with Side Inlets, Inlets, in. (mm)
Nominal Nomin al Pipe Size Single Side Inlet 3 by 3 by 3 by 3 by 1 1 ⁄ 2 3 by 3 by 3 by 3 by 2 4 by 4 by 4 by 4 by 2 Inlet Both Sides 3 by 3 by 3 by 3 by 1 1 ⁄ 2 by 11 ⁄ 2 3 by 3 by 3 by 3 by 2 by 2 4 by 4 by 4 by 4 by 2 by 2
G1
G2
G3
G4
G5
47 ⁄ 8 (124) 47 ⁄ 8 (124) 61 ⁄ 8 (156)
31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 35 ⁄ 16 16 (84)
311 ⁄ 16 16 (94) 311 ⁄ 16 16 (94) 37 ⁄ 8 (min) (98)
47 ⁄ 8 (124) 47 ⁄ 8 (124) 61 ⁄ 8 (156)
31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
31 ⁄ 16 16 (78) 31 ⁄ 16 16 (78) 37 ⁄ 8 (98)
29 ⁄ 16 16 (65) 27 ⁄ 8 (73) 35 ⁄ 16 16 (84)
311 ⁄ 16 16 (94) 311 ⁄ 16 16 (94) 5 (127)
13
D3311 – 09a Sanitary ary Tees, Tees, with Slip Joint, Joint, in. (mm) (mm) TABLE 29 Sanit
Nominal Pipe Size
11 ⁄ 4 11 ⁄ 2 11 ⁄ 2 by 11 ⁄ 4 by 11 ⁄ 2
Sanitary Tee
G1
G2
21 ⁄ 4 (57) 23 ⁄ 4 (70) 21 ⁄ 2 (64)
11 ⁄ 2 (38) 13 ⁄ 4 (44) 13 ⁄ 4 (44)
Sanitary Tee Through Wall
G3 , min 23 ⁄ 16 16 (56) 27 ⁄ 16 16 (62) 27 ⁄ 16 16 (62)
G1
G2
21 ⁄ 4 (57) 23 ⁄ 4 (70) 21 ⁄ 2 (64)
11 ⁄ 2 (38) 13 ⁄ 4 (44) 13 ⁄ 4 (44)
G3, min 3 (76) 3 (76) 3 (76)
TABLE 30 30 Uprig Upright ht Wye, Wye, in. (mm) (mm)
Nominal Pipe Size
G1 min G1 min
2 by 2 by 2 3 by 3 by 3 Reducing 2 by 2 by 1 1 ⁄ 2 3 by 3 by 2
G2 min min
G3 min min
51 ⁄ 2 (140) 71 ⁄ 2 (191)
53 ⁄ 16 16 (132) 73 ⁄ 8 (187)
33 ⁄ 4 (95) 51 ⁄ 4 (133)
41 ⁄ 4 (108) 53 ⁄ 16 16 (132)
41 ⁄ 8 (105) 55 ⁄ 16 16 (135)
31 ⁄ 16 16 (78) 49 ⁄ 16 16 (116)
TABLE 31 Singl Single e 45° Wye, with Auxiliar Auxiliary y Inlet, in. (mm) (mm)
NOTE—RH —RH.AI .AI = Rig Right ht Hand Hand Auxi Auxilia liary ry Inlet Inlet LH.AI LH. AI = Lef Leftt Hand Hand Auxi Auxiliar liary y Inlet Inlet DBL.AI DBL. AI = Doubl Doublee Auxiliary Auxiliary Inlets Inlets V = Ven entt
Nominal Pipe Size 3 3 3 3
by 3 by 1 ⁄ 2 V by 1 ⁄ 2 RH.AI by 3 by 11 ⁄ 2 V by 1 1 ⁄ 2 LH.AI by 3 by 2 V by 2 RH.AI by 3 by 2 V by 2 LH.AI 1
1
G1 4 ⁄ 4 (108) 41 ⁄ 4 (108) 5 (127) 5 (127) 1
G2
G3
G4
G5
⁄ 2 (13) ⁄ 2 (13) 7 ⁄ 8 (22) 7 ⁄ 8 (22)
4 ⁄ 16 16 (110) 45 ⁄ 16 16 (110) 45 ⁄ 8 (117) 45 ⁄ 8 (117)
3 ⁄ 16 16 (81) 33 ⁄ 16 16 (81) 31 ⁄ 4 (83) 31 ⁄ 4 (83)
1 ⁄ 4 (44) 13 ⁄ 4 (44) 25 ⁄ 16 16 (59) 25 ⁄ 16 16 (59)
1
1
14
5
3
3
D3311 – 09a Vertical tical Closet Closet Bend, with Auxiliar Auxiliary y Inlets, in. (mm) TABLE 32 Ver
NOTE—RH —RH.AI .AI = Rig Right ht Hand Hand Auxi Auxilia liary ry Inlet Inlet LH.AI LH. AI = Lef Leftt Hand Hand Auxi Auxiliar liary y Inlet Inlet DBL.AI DBL. AI = Doubl Doublee Auxiliary Auxiliary Inlets Inlets V = Ven entt
Nominal Pipe Size 3 by 3 by 4 by 2V by 2 RH.AI 3 by 3 by 4 by 2V by 2 LH.AI 3 by 3 by 4 by 2V by 2 by 2 DBL.AI
G1
G2
G3
G4
G5
G6
G7
71 ⁄ 2 (191) 71 ⁄ 2 (191) 71 ⁄ 2 (191)
53 ⁄ 8 (137) 53 ⁄ 8 (137) 53 ⁄ 8 (137)
61 ⁄ 8 (156) 61 ⁄ 8 (156) 61 ⁄ 8 (156)
35 ⁄ 32 32 (80) 55 ⁄ 32 32 (80) 35 ⁄ 32 32 (80)
23 ⁄ 4 (70) 23 ⁄ 4 (70) 23 ⁄ 4 (70)
27 ⁄ 8 (73) 27 ⁄ 8 (73) 27 ⁄ 8 (73)
27 ⁄ 8 (73) 27 ⁄ 8 (73) 27 ⁄ 8 (73)
TABLE 33 Horiz Horizontal ontal Closet Closet Bend, with Auxiliar Auxiliary y Inlets, in. (mm)
NOTE—RH —RH.AI .AI = Rig Right ht Hand Hand Auxi Auxilia liary ry Inlet Inlet LH.AI LH. AI = Lef Leftt Hand Hand Auxi Auxilia liary ry Inlet Inlet DBL.AII = Doubl DBL.A Doublee Auxiliary Auxiliary Inlets V = Vent
Nominal Pipe Size
G1
3 by 4 by 2V by 2 RH.AI 3 by 4 by 2V by 2 LH.AI
G2
G3
G4
⁄ 16 16 (14)
41 ⁄ 2 (114)
25 ⁄ 16 16 (59)
15
⁄ 16 16 (14)
41 ⁄ 2 (114)
25 ⁄ 16 16 (59)
15
45 ⁄ 8 (117)
9
45 ⁄ 8 (117)
9
G5
G6
G7
G8
⁄ 32 32 (12)
63 ⁄ 16 16 (157)
27 ⁄ 8 (73)
9
⁄ 32 32 (12)
63 ⁄ 16 16 (157)
27 ⁄ 8 (73)
9
⁄ 32 32 (7)
1
⁄ 32 32 (7)
1
TABLE 34 Strain Strainer er Adapter Adapter,, in. (mm)
Nominal Pipe Size 11 ⁄ 2
Fem. NPSM 3 Spigot
Fem. NPSM 3Hub
L
L, min
33 ⁄ 8 (86)
17 ⁄ 8 (48)
15
G9 G9 ⁄ 4 (6) ⁄ 4 (6)
D3311 – 09a TABLE 35 Swivel Strainer Strainer,, Adapter, Adapter, in. (mm)
Short
Nominal Pipe Size 11 ⁄ 2
Long
L1
111 ⁄ 16 16 (43)
L2
L1
⁄ 8 (16)
27 ⁄ 16 16 (62)
5
L2
⁄ 8 (16)
5
TABLE 36 Cleano Cleanout ut Female Fitting Fitting Adapter Adapter,, in. (mm)
Nominal Pipe Size 11 ⁄ 4 11 ⁄ 2 2 3 4
N , min 5 ⁄ 32 32 (4) 5 ⁄ 32 32 (4) 5 7 ⁄ 32 32 ⁄ 32 32 (4) (6) 1 ⁄ 4 (6)
I , min ⁄ 2 (13) 5 ⁄ 8 (16) 5 ⁄ 8 (16) 3 ⁄ 4 (19) 7 ⁄ 8 (22) 1
16
W , min 111 ⁄ 32 32 (34) 115 ⁄ 32 32 (37) 117 ⁄ 32 32 (39) 215 ⁄ 32 32 (63) 23 ⁄ 4 (70)
D3311 – 09a Cut-In n Adapter Adapter TABLE 37 Cut-I
NOTE 1—Adjustable plastic ring optional. NOTE 2—Knockout optional in all configurations. NOTE 3—Adj 3—Adjustab ustable le metal ring option optional al and must be protected by a corro corrosionsion-resisa resisant nt coating.
Minimum Dimensions, in. (mm) 11 ⁄ 2
2
3
4
L L1 L2 L3 L4 L5 D1
... ... ... ... ... ... ...
1 ⁄ 4 (32) 21 ⁄ 2 (64) 0.60 (15.2) 1 (25) 0.53 (13.5) 11 ⁄ 4 (32) 2.385 (60.58)
... ... ... ... ... ... ...
... ... ... ... ... ... ...
D2 D3 D4 D5
... ... ... ...
2.940 2.380 2.577 2.385
... ... ... ...
... ... ... ...
1
(74.69) (60.45) (65.46) (60.58)
TABLE TA BLE 38 4 by 3 in. Closet Flange Flange (MPT)
M (min) 32 17 ⁄ 32 (51 ⁄ 2)
E (min)
L (min)
TH’D (min)
⁄ (6)
34 ⁄ (18)
3 –8
14
17
9
D3311 – 09a Threaded Closet Closet Flange Flange (FPT) TABLE 39 4 by 3 in. Threaded
NOTE 1—Adjustable plastic ring optional. NOTE 2—Knockout optional in all configurations. NOTE 3—Adj 3—Adjustab ustable le metal ring option optional al and must be protected by a corro corrosionsion-resisa resisant nt coating.
M (min) ⁄ 32 32 (51 ⁄ 2) 7
E (min)
L (min)
TH’D (min)
⁄ 4 (6)
⁄ 4 (18)
3 –8
1
3
18
9
D3311 – 09a TABLE BLE 40 4 by 3 in. Closet Flange Flange (Spigot (Spigot)) TA
NOTE 1—Adjustable plastic ring optional. NOTE 2—Knockout optional in all configurations. NOTE 3—Adj 3—Adjustab ustable le metal ring option optional al and must be protected by a corro corrosionsion-resisa resisant nt coating.
M (min) ⁄ 32 32 (51 ⁄ 2) 7
E (min)
L (min)
⁄ 4 (6)
⁄ 4 (18)
1
19
3
D3311 – 09a 41 4 by 3 in. Closet Closet Flange Flange (HUB) (HUB) TABLE 41
NOTE 1—Adjustable plastic ring optional. NOTE 2—Knockout optional in all configurations. NOTE 3—Adj 3—Adjustab ustable le metal ring option optional al and must be protected by a corro corrosionsion-resisa resisant nt coating.
M (min) 7 ⁄ 32 32 (51 ⁄ 2)
E (min)
L (min)
⁄ 4 (6)
11 ⁄ 4 (32)
1
20
D3311 – 09a 42 4 by 4 in. Closet Closet Flange Flange (HUB) (HUB) TABLE 42
NOTE 1—Adjustable plastic ring optional. NOTE 2—Knockout optional in all configurations. NOTE 3—Adj 3—Adjustab ustable le metal ring option optional al and must be protected by a corro corrosionsion-resisa resisant nt coating.
M (min) 7 ⁄ 32 32 (51 ⁄ 2)
E (min)
L (min)
⁄ 4 (6)
2 (51)
1
21
D3311 – 09a TABLE 43 Drain Base Hub/Spigot Hub/Spigot for Roof, Floor and Sediment Drains
NOTE 1—1 ⁄ 2 in. FPT Primer Tap, Optional in All Configurations with Optional Knockout NOTE 2—Inserts Used in Securing Clamping Collars or Underdeck Clamp, Optional in all Configurations Nominal Pipe/Spigot or Gasket Sizes: 1 1 ⁄ 2 in., 2 in., 3 in., 4 in., 6 in.
Nominal Pipe Size
L
D
2
5.25 6 0.10 (13.3 6 0.25) 5.00 6 0.10 (12.7 6 0.25) 5.25 6 0.10 (13.3 6 0.25) 6.00 6 0.10 (15.2 6 0.25)
12 (30.5) 12 (30.5) 12 (30.5) 12 (30.5)
3 4 6
22
D3311 – 09a Offset Closet Flange (Hub) (Hub) TABLE 44 4 by 3in. Offset
NOTE 1—Adjustable Plastic Ring Optional NOTE 2—Knockout Optional in all Configurations NOTE 3—Adjustable Metal Ring Optional Cylinder B must be Free of Ledges and Corners and must be protected by a corrosion-resistant coating NOTE 4—Cylinder S must be Free of Ledges and Corners NOTE 5—Offset, Centerline to Centerline
L, Typical Height 4.5 6 -1 ⁄ 8 (11.4 6 0.32)
C, Offset
2 6 -1 ⁄ 4 (5.1 6 0.64)
D, Diameter
7 6 -1 ⁄ 4 (17.8 6 0.64)
23
E, Flange Thickness
⁄ 4 min. (0.64)
1
D3311 – 09a TABLE 45 Select Selectable able Angle Bends, Bends, in. (mm)
NOTE 1—Us 1—Usee interp interpolation olation for angles betwe between en those shown. NOTE 2—The selectable angle bend is covered by a patent. Interested parties are invited to submit information regarding the identification of an alternative(s) to this patented item to the ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the responsible respo nsible technical committee, committee, which you may attend.
11 ⁄ 2 ANGLE, degrees 111 ⁄ 4 ( 1 ⁄ 32 32 bend) 15 20 221 ⁄ 2 ( 1 ⁄ 16 16 bend) 25 30 35 40 45 (1 ⁄ 8 bend) 50 55 60 (1 ⁄ 6 bend) 65 70 75 80 85 88.8 (pitch 1° 12 min) 90 (1 ⁄ 4 bend)
A 0.96 1.05 1.16 1.22 1.28 1.40 1.53 1.66 1.79 1.92 2.07 2.22 2.37 2.54 2.71 2.90 3.11 3.27 3.33
(24) (27) (30) (31) (33) (36) (39) (42) (45) (49) (52) (56) (60) (64) (69) (74) (79) (83) (84)
NOMINAL PIPE SIZE NOMINAL 2
B 0.42 0.51 0.63 0.69 0.75 0.87 0.99 1.12 1.25 1.39 1.53 1.68 1.84 2.00 2.18 2.37 2.57 2.74 2.79
(11) (13) (16) (18) (19) (22) (25) (28) (32) (35) (39) (43) (47) (51) (55) (60) (65) (70) (71)
A 1.01 1.11 1.24 1.31 1.38 1.52 1.66 1.80 1.95 2.11 2.27 2.44 2.62 2.81 3.01 3.23 3.46 3.65 3.71
(26) (28) (31) (33) (35) (39) (42) (46) (50) (54) (58) (62) (67) (71) (77) (82) (88) (93) (94)
B 0.46 0.56 0.69 0.76 0.83 0.97 1.11 1.26 1.41 1.56 1.73 1.90 2.08 2.27 2.47 2.68 2.91 3.10 3.17
24
3
DIMENSIONS A
(12) (14) (18) (19) (21) (25) (28) (32) (36) (40) (44) (48) (53) (58) (63) (68) (74) (79) (81)
– 1.71 (43) 1.92 (49) 2.02 (51) 2.13 (54) 2.34 (59) 2.56 (65) 2.79 (71) 3.02 (77) 3.26 (83) 3.51 (89) 3.78 (96) 4.05 (103) 4.34 (110) 4.65 (118) 4.99 (127) 5.34 (136) 5.63 (143) 5.74 (146)
4 B
A
B
– 0.84 (21) 1.04 (26) 1.15 (29) 1.25 (32) 1.47 (37) 1.69 (43) 1.91 (49) 2.14 (54) 2.39 (61) 2.64 (67) 2.90 (74) 3.18 (81) 3.47 (88) 3.78 (96) 4.11 (104) 4.47 (113) 4.76 (121) 4.86 (123)
– – 2.16 (55) 2.27 (58) 2.39 (61) 2.64 (67) 2.89 (73) 3.14 (80) 3.40 (86) 3.68 (93) 3.96 (101) 4.26 (108) 4.57 (116) 4.91 (125) 5.26 (134) 5.64 (143) 6.04 (153) 6.37 (162) 6.48 (165)
– – 1.19 (30) 1.31 (33) 1.43 (36) 1.67 (42) 1.92 (49) 2.17 (55) 2.44 (62) 2.71 (69) 2.99 (76) 3.29 (84) 3.61 (92) 3.94 (100) 4.29 (109) 4.67 (119) 5.07 (129) 5.40 (137) 5.51 (140)
D3311 – 09a TABLE 46 45° Slip Joint Double Double Y
Nominal Pipe Size 2 by 11 ⁄ 2 by 11 ⁄ 2 by 11 ⁄ 2
G1
51 ⁄ 2
G2
41 ⁄ 4
G3
11 ⁄ 2
25
G4
37 ⁄ 8
G5
11 ⁄ 4
G6
13 ⁄ 16 16
A
11 ⁄ 2
D3311 – 09a
FIG. 1 Closet Rings and Closet BendsA, in. NOTE-Slot is optional if fully reinforced with a corrosion-resistant material. A All dimensions minimum, unless otherwise noted. B Shorter rise length is optional for limited floor crawl space of MH applications.
26
D3311 – 09a SUMMARY OF CHANGES Committee F17 has identified the location of selected changes to this standard since the last issue (D3311–09) that may impact the use of this standard. (1) Table 13 was 13 was revised. ASTM International International takes no positi position on respecting the validi validity ty of any patent rights assert asserted ed in connec connection tion with any item mentio mentioned ned in this standard. Users of this standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, are entirely their own responsibility. This standard is subject to revision at any time by the responsible technical committee and must be reviewed every five years and if not revised, either reapproved or withdrawn. Your comments are invited either for revision of this standard or for additional standards and should be addressed to ASTM International Headquarters. Your comments will receive careful consideration at a meeting of the responsible respon sible technical technical committee, which you may attend. If you feel that your comments have not receiv received ed a fair hearing you should make your views known to the ASTM Committee on Standards, at the address shown below. This standard is copyrighted by ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959, United States. Individual reprints (single or multiple copies) of this standard may be obtained by contacting ASTM at the above address addr ess or at 610610-832832-9585 9585 (pho (phone), ne), 610610-832832-9555 9555 (fax (fax), ), or serv service@ ice@astm astm.org .org (e-m (e-mail) ail);; or thro through ugh the ASTM webs website ite (www.astm.org).
27
