ASME B16.5 Flanges

CHAOWEI ANSI/ASME B16.5 FLANGE Size:

NPS 1/2" - NPS 24" Pressure Rating:

Class 150, Class 300, Class 400, Class 600, Class 900, Class 1500, Class 2500 SLIP ON

WELDING NECK

SOCKET WELDING

BLIND

THREADED

LAP JOINT

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 Url: http://www.chinachaowei.com p //

Page 1

CHAOWEI ANSI/ASME B16.5 FLANGE INDEX Material Specifications Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating p g Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Pressure Temperature Rating Flange Dimension Class 150 Flange g Dimension Class 300 Flange Dimension Class 400 Flange Dimension Class 600 Flange Dimension Class 900 Flange Dimension Class 1500 Flange Dimension Class 2500 Tolerances

Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material Material

Group Group Group Group Group Group Group Group Group Group Group Group Group Group Group Group Group Group Group p Group Group Group Group Group Group

2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16

…………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… …………………………………………………………………………………………… ……………………………………………………………………………………………

P3 P4 P4 P5 P5 P6 P6 P7 P7 P8 P8 P8 P9 P9 P9 P10 P10 P10 P11 P12 P12 P12 P12 P13 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 Url: http://www.chinachaowei.com

Page 2

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Material Group

UNS Number

2.1

S30400 S30409 S31600 S31609 S31700 S30403 S31603 S31703 S32100 S32109 S34700 S34709 S34800 S34809 S30909 S31000 S31009 S31254 S31803 S32750 S32760 S30908 S31008 N08020 N02200 N02201 N04400 N04405 N06600 N08800 N10665 N10675 N10276 N06625 N10001 N10003 N06455 N08825 N06022 N06200 N06002 R30556 N08700 N08904 N08320 N06985 N08367 N06975 N08031 N06007 N06030 N06035 N08810 N08330

2.2

2.3

2.4 2.5

2.6 2.7 2.8

2.9 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8

3.9 3.10 3.11 3.12

3.13 3.14

3.15 3.16

Alloy Name

Nominal Designation

Applicable ASTM Specifications Forgings Plates

Austenitic Stainless Steel 304 Austenitic Stainless Steel 304H Austenitic Stainless Steel 316 Austenitic Stainless Steel 316H Austenitic Stainless Steel 317 Austenitic Stainless Steel 304L Austenitic Stainless Steel 316L Austenitic Stainless Steel 317L Austenitic Stainless Steel 321 Austenitic Stainless Steel 321H Austenitic Stainless Steel 347 Austenitic Stainless Steel 347H Austenitic Stainless Steel 348 Austenitic Stainless Steel 348H Austenitic Stainless Steel 309H Austenitic Stainless Steel 310 Austenitic Stainless Steel 310 H Super Austenitic Stainless Steel F44 Duplex Stainless Steel F51 Super Duplex Stainless Steel F53 Super Duplex Stainless Steel F55 Austenitic Stainless Steel 309S Austenitic Stainless Steel 310S Incoloy 020 Nickel 200 Nickel 201 Monel 400 Monel R-405 Inconel 600 Incoloy 800 Hastelloy B-2 Hastelloy B-3 Hastelloy C-276 Inconel 625 Hastelloy B Hastelloy N Hastelloy C-4 Incoloy 825 Hastelloy C-22 Hastelloy C-2000 Hastelloy X Haynes 556 ATI JS700 904L Hastelloy 20MOD Hastelloy H t ll G-3 G3 Incoloy 25-6HN Nimonic 75 Nicrofer 3127 hMO Hastelloy G Hastelloy G-30 Hastelloy G-35 Incoloy 800H Incoloy 330

18Cr-8Ni 18Cr-8Ni 16Cr-12Ni-2Mo 16Cr-12Ni-2Mo 18Cr-13Ni-3Mo 18Cr-18Ni 16Cr 12Ni 2Mo 16Cr-12Ni-2Mo 18Cr-13Ni-3Mo 18Cr-10Ni-Ti 18Cr-10Ni-Ti 18Cr-10Ni-Cb 18Cr-10Ni-Cb 18Cr-10Ni-Cb 18Cr-10Ni-Cb 23Cr-12Ni 25Cr-20Ni 25Cr-20Ni 20Cr-18Ni-6Mo 22Cr-5Ni-3Mo-N 25Cr-7Ni-4Mo-N 25Cr-7Ni-3.5Mo-N-Cu-W 23Cr-12Ni 25Cr-20Ni 35Ni-35Fe-10Cr-Cb 99.0Ni 99.0Ni-Low Carbon 67Ni-30Cu 67Ni-30Cu-S 72Ni-15Cr-8Fe 33Ni-42Fe-21Cr 65Ni-28Mo-2Fe 65Ni-29.5Mo-2Cr-2Fe-Mn-W 54Ni-16Mo-15Cr 60Ni-22Cr-9Mo-3.5Cb 62Ni-28Mo-5Fe 70Ni-16Mo-7Cr-5Fe 61Ni-16Mo-16Cr 42Ni-21.5Cr-3Mo-2.3Cu 55Ni-21Cr-13.5Mo 55Ni-23Cr-16Mo-1.6Cu 47Ni-22Cr-9Mo-18Fe 21Ni–30Fe–22Cr–18Co–3Mo–3W 25Ni-46Fe-21Cr-5Mo 44Fe-25Ni-21Cr-Mo 26Ni-42Fe-22Cr-5Mo 47Ni-22Cr-20Fe-7Mo 47Ni 22C 20F 7M 46Fe-24Ni-21Cr-6Mo-Cu-N 49Ni-25Cr-18Fe-6Mo Ni-Fe-Cr-Mo-Cu-Low Carbon 47Ni-22Cr-19Fe-6Mo 40Ni-29Cr-15Fe-5Mo 58Ni–33Cr–8Mo 33Ni-42Fe-21Cr 35Ni-19Cr-1.25Si

ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM A182 ASTM B462 ASTM B564 ASTM B564 ASTM B164 ASTM B564 ASTM B564 ASTM B462 ASTM B462 ASTM B462 ASTM B564 ASTM B564 ASTM B462 ASTM B462 ASTM B572 ASTM A479 ASTM B462 ASTM B564 ASTM B462 ASTM B462 ASTM B564 ASTM B511

ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM A240 ASTM B463 ASTM B162 ASTM B162 ASTM B127 ASTM B168 ASTM B409 ASTM B333 ASTM B333 ASTM B575 ASTM B443 ASTM B333 ASTM B434 ASTM B575 ASTM B424 ASTM B575 ASTM B575 ASTM B435 ASTM B435 ASTM B599 ASTM A240 ASTM B620 ASTM B582 ASTM B688 ASTM B582 ASTM B625 ASTM B582 ASTM B582 ASTM B575 ASTM B409 ASTM B536

Monel,, Inconel,, Incoloy, y, Nimomic,, Nicrofer are registered g trademarks of Special p Metal Corporation p group g p of companies. p Hastelloy, Haynes are registered trademark of Haynes International inc. ATI is registered trademark of ATI Properties, Inc. or its affiliated companies

Zhejiang CHAOWEI New Material Co.,Ltd. No 128 Houzhang Rd, No.128, Rd Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

CH HAOWE EI - AN NSI /AS SME B16.5

Material Specifications

ANSI / ASME B16.5

Page 3

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

ANSI / ASME B16.5 GROUP 2.1 MATERIAL Nominal Designation Alloy Name 18Cr-8Ni S30400 Austenitic Stainless Steel 304 18Cr-8Ni S30409 Austenitic Stainless Steel 304H (A) At temperature over 538 °C, use only when the Carbon content is 0.04% or higher UNS No

-29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

Plates ASTM A240 (A) ASTM A240

Work Pressure (Bar) 150

300

400

600

900

1500

2500

19.0 18.3 15.7 14.2 13.2 12.1 10.2 9.3 8.4 7.4 6.5 55 5.5 4.6 3.7 2.8 1.4 -

49.6 47.8 40.9 37.0 34.5 32.5 30.9 30.2 29.6 29.0 28.4 28 0 28.0 27.4 26.9 26.5 24.4 23.6 20.8 16.9 13.8 11.3 9.3 8.0 6.8 5.8 4.6 3.5 2.8

66.2 63.8 54.5 49.3 46.0 43.3 41.2 40.3 39.5 38.7 37.9 37 3 37.3 36.5 35.9 35.3 32.6 31.4 27.8 22.5 18.4 15.0 12.5 10.7 9.0 7.7 6.2 4.8 3.8

99.3 95.6 81.7 74.0 69.0 65.0 61.8 60.4 59.3 58.1 56.9 56 0 56.0 54.8 53.9 53.0 48.9 47.1 41.7 33.8 27.6 22.5 18.7 16.1 13.5 11.6 9.0 7.0 5.9

148.9 143.5 122.6 111.0 103.4 97.5 92.7 90.7 88.9 87.1 85.3 84 0 84.0 82.2 80.8 79.5 73.3 70.7 62.5 50.6 41.4 33.8 28.0 24.1 20.3 17.3 13.7 10.5 8.6

248.2 239.1 204.3 185.0 172.4 162.4 154.6 151.1 148.1 145.2 142.2 140 0 140.0 137.0 134.7 132.4 122.1 117.8 104.2 84.4 68.9 56.3 46.7 40.1 33.8 28.9 22.8 17.4 14.1

413.7 398.5 340.4 308.4 287.3 270.7 257.6 251.9 246.9 241.9 237.0 233 3 233.3 228.4 224.5 220.7 203.6 196.3 173.7 140.7 114.9 93.8 77.9 66.9 56.3 48.1 38.0 29.2 23.8

GROUP 2.2 MATERIAL Nominal Designation Alloy Name 16Cr-12Ni-2Mo Austenitic Stainless Steel 316 S31600 16Cr-12Ni-2Mo S31609 Austenitic Stainless Steel 316H 18Cr-13Ni-3Mo Austenitic Stainless Steel 317 S31700 (A) At temperature over 538 °C, use only when the Carbon content is 0.04% or higher UNS No

Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 50 750 775 800 816

Forgings

Plates

ASTM A182 ((A)) ASTM A182 ASTM A182 (A)

ASTM A240 ((A)) ASTM A240 ASTM A240 (A)

Work Pressure (Bar) 150

300

400

600

900

1500

2500

19.0 18.4 16.2 14.8 14 8 13.7 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 3.7 28 2.8 1.4 -

49.6 48.1 42.2 38.5 38 5 35.7 33.4 31.6 30.9 30.3 29.9 29.4 29.1 28.8 28.7 28 2 28.2 25.2 25.0 24.0 19.9 15.8 12.7 10.3 8.4 7.0 5.9 5 9 4.6 3.5 2.8

66.2 64.2 56.3 51.3 51 3 47.6 44.5 42.2 41.2 40.4 39.8 39.3 38.9 38.5 38.2 37 6 37.6 33.4 33.3 31.9 26.5 21.1 16.9 13.8 11.2 9.3 7.8 8 6.2 4.8 3.8

99.3 96.2 84.4 77.0 77 0 71.3 66.8 63.2 61.8 60.7 59.8 58.9 58.3 57.7 57.3 56 5 56.5 50.0 49.8 47.9 39.8 31.6 25.3 20.6 16.8 14.0 11.7 9.0 7.0 5.9

148.9 144.3 126.6 115.5 115 5 107.0 100.1 94.9 92.7 91.0 89.6 88.3 87.4 86.5 86.0 84 7 84.7 75.2 74.8 71.8 59.7 47.4 38.0 31.0 25.1 21.0 17.6 6 13.7 10.5 8.6

248.2 240.6 211.0 192.5 192 5 178.3 166.9 158.1 154.4 151.6 149.4 147.2 145.7 144.2 143.4 140 9 140.9 125.5 124.9 119.7 99.5 79.1 63.3 51.6 41.9 34.9 29.3 93 22.8 17.4 14.1

413.7 400.9 351.6 320.8 320 8 297.2 278.1 263.5 257.4 252.7 249.0 245.3 242.9 240.4 238.9 235 0 235.0 208.9 208.0 199.5 165.9 131.8 105.5 86.0 69.8 58.2 48.9 89 38.0 29.2 23.8

C CHAOW WEI - AN NSI /AS SME B1 16.5

Temp, °C

Forgings ASTM A182 (A) ASTM A182

Page 4

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 2.3 MATERIAL Alloy Name UNS No Austenitic Stainless Steel 304L S30403 S31603 Austenitic Stainless Steel 316L Austenitic Stainless Steel 317L S31703 (A) Not to be used over 425 °C Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450

150 15.9 15.3 13.3 12.0 11.2 10.5 10.0 9.3 8.4 7.4 6.5 55 5.5 4.6

300 41.4 40.0 34.8 31.4 29.2 27.5 26.1 25.5 25.1 24.8 24.3 23 9 23.9 23.4

Nominal Designation 18Cr-18Ni 16Cr-12Ni-2Mo 18Cr-13Ni-3Mo

400 55.2 53.4 46.4 41.9 38.9 36.6 34.8 34.0 33.4 33.0 32.4 31 8 31.8 31.2

Forgings ASTM A182 (A) ASTM A182 ASTM A182

Work Pressure (Bar) 600 82.7 80.0 69.6 62.8 58.3 54.9 52.1 51.0 50.1 49.5 48.6 47 7 47.7 46.8

900 124.1 120.1 104.4 94.2 87.5 82.4 78.2 76.4 75.2 74.3 72.9 71 6 71.6 70.2

Plates ASTM A240 (A) ASTM A240 ASTM A240

1500 206.8 200.1 173.9 157.0 145.8 137.3 130.3 127.4 125.4 123.8 121.5 119 3 119.3 117.1

2500 344.7 333.5 289.9 261.6 243.0 228.9 217.2 212.3 208.9 206.3 202.5 198 8 198.8 195.1

GROUP 2.4 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No 18Cr-10Ni-Ti Austenitic Stainless Steel 321 ASTM A182 (A) ASTM A240 (A) S32100 18Cr-10Ni-Ti S32109 Austenitic Stainless Steel 321H ASTM A182 (B) ASTM A240 (B) (A) Not to be used over 538 °C (B) At temperature over 538 °C, use if the material is heat treated by heating to a minumum temperature of 1,095 °C. Temp °C Temp, C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.6 17.0 15.7 13.8 12.1 10.2 9.3 8.4 74 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

300 49.6 48.6 44.2 41.0 38.3 36.0 34.1 33.3 32.6 32 0 32.0 31.6 31.1 30.8 30.5 28.2 25.2 25.0 24.0 20.3 15.8 12.6 9.9 7.9 6.3 5.0 4.0 3.1 2.6

400 66.2 64.7 59.0 54.6 51.1 48.0 45.5 44.4 43.5 42 7 42.7 42.1 41.5 41.1 40.7 37.6 33.4 33.3 31.9 27.0 21.1 16.9 13.2 10.5 8.5 6.7 5.3 4.2 3.5

Work Pressure (Bar) 600 99.3 97.1 88.5 82.0 76.6 72.0 68.3 66.6 65.2 64 1 64.1 63.2 62.3 61.7 61.1 56.5 50.0 49.8 47.9 40.5 31.6 25.3 19.8 15.8 12.7 10.0 8.0 6.3 5.2

900 148.9 145.7 132.7 122.9 114.9 108.1 102.4 99.9 97.8 96 1 96.1 94.8 93.4 92.5 91.6 84.7 75.2 74.8 71.8 60.8 47.4 37.9 29.6 23.7 19.0 15.0 11.9 9.4 7.8

1500 248.2 242.8 221.2 204.9 191.5 180.1 170.7 166.5 163.0 160 2 160.2 157.9 155.7 154.2 152.7 140.9 125.5 124.9 119.7 101.3 79.1 63.2 49.4 39.5 31.7 25.0 19.9 15.6 13.0

2500 413.7 404.6 368.7 341.5 319.1 300.2 284.6 277.6 271.7 266 9 266.9 263.2 259.5 256.9 254.4 235.0 208.9 208.0 199.5 168.5 131.8 105.4 82.3 65.9 52.8 41.7 33.2 26.1 21.7

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area W Wenzhou, h 325000, 325000 Zh Zhejiang, ji P P.R.China R Chi Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

C CHAOW WEI - ANSI /AS SME B16.5

ANSI / ASME B16.5

Page 5

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 2.5 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No Austenitic Stainless Steel 347 18Cr-10Ni-Cb ASTM A182 (A) ASTM A240 S34700 S34709 Austenitic Stainless Steel 347H 18Cr-10Ni-Cb ASTM A182 (B) ASTM A240 S34800 Austenitic Stainless Steel 348 18Cr-10Ni-Cb ASTM A182 (A) ASTM A240 S34809 Austenitic Stainless Steel 348H 18Cr-10Ni-Cb ASTM A182 (B) ASTM A240 (A) Not to be use at temperature over 538 °C. (B) For temperature over 538 °C, use if the material is heat treated by heating to a minumum temperature of 1,095 °C. Temp °C Temp, C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.7 17.4 15.8 13.8 12.1 10.2 9.3 8.4 74 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

300 49.6 48.8 45.3 42.5 39.9 37.8 36.1 35.4 34.8 34 2 34.2 33.9 33.6 33.5 31.7 28.2 25.2 25.0 24.0 21.6 18.3 14 1 14.1 12.4 10.1 7.9 5.9 4.6 3.5 2.8

GROUP 2.6 MATERIAL UNS No Alloy Name S30909 Austenitic Stainless Steel 309H Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.5 16.5 15.3 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

300 49.6 48.3 43.1 40.0 37.8 36.1 34.8 34.2 33.8 33.4 33.1 32.6 32.2 31.7 28.2 25.2 25.0 22.2 16.8 12.5 9.4 7.2 5.5 4.3 3.4 2.7 2.1 18 1.8

400 66.2 65.0 60.4 56.6 53.3 50.4 48.1 47.1 46.3 45 6 45.6 45.2 44.8 44.6 42.3 37.6 33.4 33.3 31.9 28.6 24.3 18 9 18.9 16.9 13.4 10.5 7.9 6.2 4.8 3.8

Work Pressure (Bar) 600 99.3 97.5 90.6 84.9 79.9 75.6 72.2 70.7 69.5 68 4 68.4 67.8 67.2 66.9 63.4 56.5 50.0 49.8 47.9 42.9 36.6 28 1 28.1 25.2 20.0 15.4 11.7 9.0 7.0 5.9

Nominal Designation 23Cr-12Ni

400 66.2 64.4 57.5 53.3 50.3 48.1 46.4 45.7 45.1 44.5 44.1 43.5 42.9 42.3 37.6 33.4 33.3 29.6 22.4 16.7 12.5 9.6 7.3 5.8 4.6 3.6 2.8 24 2.4

900 148.9 146.3 135.9 127.4 119.8 113.4 108.3 106.1 104.3 102 6 102.6 101.7 100.8 100.4 95.1 84.7 75.2 74.8 71.8 64.2 54.9 42 5 42.5 37.6 29.8 23.2 17.6 13.7 10.5 8.6

Forgings -

Work Pressure (Bar) 600 99.3 96.6 86.2 80.0 75.5 72.1 69.6 68.5 67.6 66.8 66.1 65.3 64.4 63.4 56.5 50.0 49.8 44.4 33.5 25.0 18.7 14.5 11.0 8.7 6.8 5.4 4.2 35 3.5

900 148.9 144.9 129.3 120.0 113.3 108.2 104.4 102.7 101.4 100.1 99.2 97.9 96.5 95.1 84.7 75.1 74.8 66.5 50.3 37.5 28.1 21.7 16.5 13.0 10.2 8.1 6.3 53 5.3

(A) (B) (A) (B)

1500 248.2 243.8 226.5 212.4 199.7 189.1 180.4 176.8 173.8 171 0 171.0 169.5 168.1 167.3 158.2 140.9 125.5 124.9 119.7 107.0 91.2 70 7 70.7 62.7 49.7 38.6 29.6 22.8 17.4 14.1

2500 413.7 406.4 377.4 353.9 332.8 315.1 300.7 294.5 289.6 285 1 285.1 282.6 280.1 278.8 263.9 235.0 208.9 208.0 199.5 178.5 152.0 117 7 117.7 104.5 83.0 64.4 49.1 38.0 29.2 23.8

Plates ASTM A240

1500 248.2 241.5 215.5 200.0 188.8 180.4 173.9 171.2 169.0 166.9 165.4 163.1 160.9 158.2 140.9 125.5 124.9 110.9 83.9 62.5 46.8 36.2 27.5 21.6 17.1 13.5 10.5 89 8.9

2500 413.7 402.5 359.2 333.3 314.7 300.6 289.9 285.4 281.7 278.2 275.6 271.9 268.2 263.9 235.0 208.9 208.0 184.8 139.8 104.2 78.0 60.3 45.9 36.0 28.4 22.4 17.5 14 8 14.8

C CHAOW WEI - ANSI /AS SME B16.5

ANSI / ASME B16.5

Page 6

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 2.7 MATERIAL Nominal Designation Alloy Name UNS No 25Cr-20Ni Austenitic Stainless Steel 310 S31000 25Cr-20Ni Austenitic Stainless Steel 310H S31009 (A) Not to be use at temperature over 538 °C, use only when the Carbon is 0.04% or higher. (B) Service temperature of 565 °C and above should be used only when assurance is provided that Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.5 16.6 15.3 13.8 12.1 10.2 9.3 8.4 7.4 6.5 55 5.5 4.6 3.7 2.8 1.4 -

300 49.6 48.4 43.4 40.0 37.6 35.8 34.5 33.9 33.3 32.9 32.4 32 1 32.1 31.7 31.2 28.2 25.2 25.0 22.2 16.8 12.5 9.4 7.2 55 5.5 4.3 3.4 2.7 2.1 1.8

400 66.2 64.5 57.9 53.3 50.1 47.7 45.9 45.2 44.4 43.8 43.2 42 8 42.8 42.2 41.7 37.6 33.4 33.3 29.6 22.4 16.7 12.5 9.6 73 7.3 5.8 4.6 3.6 2.8 2.4

-29 to 38 50 100 150 200 250 300 325 350 375 400

150 20.0 19.5 17.7 15.8 13.8 12.1 10.2 9.3 8.4 7.4 6.5

300 51.7 51.7 50.7 45.9 42.7 40.5 38.9 38.2 37.6 37.4 36.5

400 68.9 68.9 67.5 61.2 56.9 53.9 51.8 50.9 50.2 49.8 48.9

Plates ASTM A240

grain size is not finer than ASTM 6.

Work Pressure (Bar) 600 99.3 96.7 86.8 80.0 75.2 71.5 68.9 67.7 66.6 65.7 64.8 64 2 64.2 63.4 62.5 56.5 50.0 49.8 44.4 33.5 25.0 18.7 14.5 11 0 11.0 8.7 6.8 5.4 4.2 3.5

GROUP 2.8 MATERIAL Nominal Designation Alloy Name UNS No S31254 Super Austenitic Stainless Steel F4420Cr-18Ni-6Mo S31803 Duplex Stainless Steel F51 22Cr-5Ni-3Mo-N S32750 Super Duplex Stainless Steel F53 25Cr-7Ni-4Mo-N S32760 Super Duplex Stainless Steel F55 25Cr-7Ni-3.5Mo-N-Cu-W (A) The steel may become brittle after service at moderately elevated temperatures. Not to be use Temp, °C

Forgings ASTM A182 (A,B) -

900 148.9 145.1 130.2 120.0 112.8 107.3 103.4 101.6 99.9 98.6 97.3 96 4 96.4 95.1 93.7 84.7 75.2 74.8 66.5 50.3 37.5 28.1 21.7 16 5 16.5 13.0 10.2 8.0 6.2 5.3

Forgings ASTM A182 ASTM A182 (A) ASTM A182 (A) ASTM A182 (A) over 315 °C.

Work Pressure (Bar) 600 103.4 103.4 101.3 91.9 85.3 80.9 77.7 76.3 75.3 74.7 73.3

900 155.1 155.1 152.0 137.8 128.0 121.4 116.6 114.5 112.9 112.1 109.8

1500 248.2 241.8 217.0 200.0 188.0 178.8 172.3 169.3 166.5 164.3 162.1 160 6 160.6 158.4 156.2 140.9 125.5 124.9 110.9 83.9 62.5 46.8 36.2 27 5 27.5 21.6 17.1 13.3 10.3 8.9

2500 413.7 403.1 361.6 333.3 313.4 298.1 287.2 282.2 277.6 273.8 270.2 267 7 267.7 264.0 260.3 235.0 208.9 208.0 184.8 139.8 104.2 78.0 60.3 45 9 45.9 36.0 28.4 22.1 17.2 14.8

Plates ASTM A240 ASTM A240 (A) ASTM A240 (A) ASTM A240 (A)

1500 258.6 258.6 253.3 229.6 213.3 202.3 194.3 190.8 188.2 186.8 183.1

2500 430.9 430.9 422.2 382.7 355.4 337.2 323.8 318.0 313.7 311.3 304.9

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area W Wenzhou, h 325000, 325000 Zh Zhejiang, ji P P.R.China R Chi Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

C CHAOW WEI - ANSI /AS SME B16.5

ANSI / ASME B16.5

Page 7

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

ANSI / ASME B16.5

Temp °C Temp, C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.5 16.6 15.3 13.8 12.1 10.2 9.3 8.4 74 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

300 49.6 48.3 43.1 40.0 37.6 35.8 34.5 33.9 33.3 32 9 32.9 32.4 32.1 31.7 31.2 28.2 23.4 20.5 15.1 11.0 8.1 58 5.8 3.7 2.2 1.4 1.0 0.8 0.6 0.5

GROUP 3.1 MATERIAL UNS No Alloy Name N08020 Incoloy 020 (A) Use annealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425

150 20.0 19.5 17.7 15.8 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5

400 66.2 64.4 57.5 53.3 50.1 47.7 45.9 45.2 44.4 43 8 43.8 43.2 42.8 42.2 41.7 37.6 31.2 27.3 20.1 14.7 10.9 78 7.8 4.9 2.9 1.8 1.4 1.1 0.8 0.6

Work Pressure (Bar) 600 99.3 99.6 86.2 80.0 75.2 71.5 68.9 67.7 66.6 65 7 65.7 64.8 64.2 63.4 62.5 56.5 46.8 41.0 30.2 22.1 16.3 11 6 11.6 7.4 4.3 2.7 2.1 1.6 1.2 0.9

Nominal Designation 35Ni-35Fe-10Cr-Cb

300 51.7 51.7 50.9 48.9 47.2 45.5 42.9 41.4 40.3 38.9 36.5 35.2

400 68.9 68.9 67.8 65.3 62.9 50.7 57.0 55.0 53.6 51.6 48.9 46.5

900 148.9 144.9 129.3 120.0 112.8 107.3 103.4 101.6 99.9 98 6 98.6 97.3 96.4 95.1 93.7 84.7 70.2 61.5 45.3 33.1 24.4 17 4 17.4 11.1 6.5 4.1 3.1 2.5 1.8 1.4

Forgings ASTM B462 (A)

Work Pressure (Bar) 600 103.4 103.4 101.7 97.9 94.3 91.0 85.7 82.6 80.4 77.6 73.3 70.0

900 155.1 155.1 152.6 146.8 141.5 136.5 128.6 124.0 120.7 116.5 109.8 105.1

1500 248.2 241.5 215.5 200.0 188.0 178.8 172.3 169.3 166.5 164 3 164.3 162.1 160.6 158.4 156.2 140.9 117.0 102.5 75.5 55.1 40.7 29 1 29.1 18.4 10.8 6.8 5.2 4.1 3.0 2.4

2500 413.7 402.5 359.2 333.3 313.4 298.1 287.2 282.2 277.6 273 8 273.8 270.2 267.7 264.0 260.3 235.0 195.0 170.8 125.8 91.9 67.9 48 5 48.5 30.7 18.0 11.4 8.6 6.8 5.0 3.9

Plates ASTM B463 (A)

1500 258.6 258.6 254.4 244.7 235.8 227.5 214.4 206.6 201.1 194.1 183.1 175.1

2500 430.9 430.9 423.9 407.8 392.9 379.2 357.1 344.3 335.3 323.2 304.9 291.6

GROUP 3.2 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No N02200 Nickel 200 99 0Ni 99.0Ni ASTM B564 (A,B) (A B) ASTM B162 (A) (A) Use annealed material only. (B) The chemical composition, mechanical properties, heat treating requirements, and grain size requirements shall conform the applicable ASTM specification. The Manufacturing procedures, tolerances, tests, certification, and marking shall be in accordance with ASTM B564 Temp, °C -29 to 38 50 100 150 200 250 300 325

150 12.7 12.7 12.7 12.7 12.7 12.1 10.2 7.2

300 33.1 33.1 33.1 33.1 33.1 31.6 29.2 18.8

400 44.1 44.1 44.1 44.1 44.1 42.1 39.0 25.0

Work Pressure (Bar) 600 66.2 66.2 66.2 66.2 66.2 63.2 58.5 37.6

900 99.3 99.3 99.3 99.3 99.3 94.8 87.7 56.4

1500 165.5 165.5 165.5 165.5 165.5 158.0 146.2 93.9

2500 275.8 275.8 275.8 275.8 275.8 263.4 243.7 156.5

C CHAOW WEI - AN NSI /AS SME B16.5

GROUP 2.9 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No 23Cr-12Ni Austenitic Stainless Steel 309S ASTM A240 (A,B,C) S30908 25Cr-20Ni S31008 Austenitic Stainless Steel 310S ASTM A240 (A,B,C) (A) Not to be use at temperature over 538 °C, use only when the Carbon is 0.04% or higher. (B) At temperature above 538 °C, use only if the material is solution heat treated to the minimum temperature specified in the specification but not lower than 1,035 °C, and quenching in water or rapidly cooling by other means. © This material should be used for service temperatures 565 °C and above only when assurance is provided that grain size is not finer than ASTM 6.

Page 8

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 3.3 MATERIAL Alloy Name UNS No N02201 Nickel 201 (A) Use annealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650

150 6.3 6.3 6.1 60 6.0 6.0 6.0 6.0 5.9 5.9 5.9 5.8 5.5 4.6 3.7 2.8 1.4 -

Nominal Designation 99.0Ni-Low Carbon

300 16.5 16.4 15.8 15 6 15.6 15.6 15.6 15.6 15.5 15.4 15.4 15.2 14.9 14.6 14.3 13.8 13.1 9.8 5.4 4.4 3.4 2.8

GROUP 3.4 MATERIAL Alloy Name UNS No N04400 Monel 400 (A) Use annealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475

150 15.9 15.4 13.8 12.9 12.5 12.1 10 2 10.2 9.3 8.4 7.4 6.5 5.5 4.6 3.7

-29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650

150 20.0 19.5 17.7 15.8 13.8 12 1 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

Work Pressure (Bar) 600 33.1 32.8 31.7 31 1 31.1 31.1 31.1 31.1 31.0 30.8 30.7 30.4 29.8 29.2 28.6 27.6 26.1 19.6 10.7 8.9 6.9 5.7

Nominal Designation 67Ni 30Cu 67Ni-30Cu

300 41.4 40.2 35.9 33.7 32.7 32.6 32 6 32.6 32.6 32.6 32.4 32.1 31.6 26.9 20.8

GROUP 3.5 MATERIAL y Name Alloy UNS No N06600 Inconel 600 (A) Use annealed material only. Temp, °C

400 22.1 21.9 21.1 20 7 20.7 20.7 20.7 20.7 20.7 20.5 20.5 20.3 19.9 19.5 19.1 18.4 17.4 13.1 7.1 5.9 4.6 3.8

400 55.2 53.7 47.9 45.0 43.6 43.5 43 5 43.5 43.5 43.4 43.2 42.8 42.2 35.9 27.7

400 68.9 68.9 68.7 66.8 64.8 61 7 61.7 57.0 55.0 53.6 51.6 48.9 46.5 45.1 42.3 37.6 22.1 18.6 12.6 8.9 6.8 6.3

900 49.6 49.2 47.5 46 7 46.7 46.7 46.7 46.7 46.5 46.2 46.1 45.6 44.7 43.8 43.0 41.4 39.2 29.5 16.1 13.3 10.3 8.5

Forgings ASTM B564 (A)

Work Pressure (Bar) 600 82.7 80.5 71.9 67.5 65.4 65.2 65 2 65.2 65.2 65.1 64.8 64.2 63.3 53.8 41.5

g Nominal Designation 72Ni-15Cr-8Fe

300 51.7 51.7 51.5 50.3 48.6 46 3 46.3 42.9 41.4 40.3 38.9 36.5 35.2 33.7 31.7 28.2 16.5 13.9 9.4 6.6 5.1 4.7

Forgings -

900 124.1 120.7 107.8 101.2 98.1 97.8 97 8 97.8 97.8 97.7 97.2 96.2 94.9 80.7 62.3

g g Forgings ASTM B564 (A)

Work Pressure (Bar) 600 103.4 103.4 103.0 100.3 97.2 92 7 92.7 85.7 82.6 80.4 77.6 73.3 70.0 67.7 63.4 56.5 33.1 27.9 18.6 13.3 10.3 9.5

900 155.1 155.1 154.6 150.6 145.8 139 0 139.0 128.6 124.0 120.7 116.5 109.8 105.1 101.4 95.1 84.7 49.6 41.8 28.3 19.9 15.4 14.2

Plates ASTM B162 (A)

1500 82.7 82.0 79.2 77 8 77.8 77.8 77.8 77.8 77.5 76.9 76.8 76.1 74.6 73.1 71.6 69.0 65.4 49.1 26.8 22.2 17.2 14.2

2500 137.9 136.7 132.0 129 6 129.6 129.6 129.6 129.6 129.2 128.2 128.0 126.8 124.3 121.8 119.3 115.1 108.9 81.8 44.6 37.0 28.7 23.6

Plates ASTM B127 (A)

1500 206.8 201.2 179.7 168.7 163.5 163.0 163 0 163.0 163.0 162.8 161.9 160.4 158.2 134.5 103.8

2500 344.7 335.3 299.5 281.1 272.4 271.1 271 7 271.7 271.7 271.3 269.9 267.4 263.6 224.2 173.0

Plates ASTM B168 (A)

1500 258.6 258.6 257.6 250.8 243.4 231 8 231.8 214.4 206.6 201.1 194.1 183.1 175.1 169.0 158.2 140.9 82.7 69.7 47.2 33.2 25.7 23.6

2500 430.9 430.9 429.4 418.2 405.4 386 2 386.2 357.1 344.3 335.3 323.2 304.9 291.6 281.8 263.9 235.0 137.9 116.2 78.6 55.3 42.8 39.4

C CHAOW WEI - AN NSI /AS SME B1 16.5

ANSI / ASME B16.5

Page 9

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 3.6 MATERIAL Alloy Name UNS No N08800 Incoloy 800 (A) Use annealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.7 17.5 15.8 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 37 3.7 2.8 1.4 -

Nominal Designation 33Ni-42Fe-21Cr

300 49.6 48.8 45.6 44.0 42.8 41.7 40.8 40.3 39.8 38.9 36.5 35.2 33.7 31 7 31.7 28.2 25.2 25.0 24.0 21.6 18.3 14.1 10.3 5.6 4.0 30 3.0 2.5 2.2 1.9

GROUP 3.7 MATERIAL Alloy Name UNS No N10665 Hastelloy B-2 N10675 Hastelloy B-3 (A) Use solution annealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425

150 20.0 19.5 17.7 15.8 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5

400 66.2 65.1 60.8 58.7 57.1 55.7 54.4 53.8 53.0 51.6 48.9 46.5 45.1 42 3 42.3 37.6 33.4 33.3 31.9 28.6 24.3 18.9 13.7 7.4 5.4 40 4.0 3.3 2.9 2.5

Work Pressure (Bar) 600 99.3 97.6 91.2 88.0 85.6 83.5 81.6 80.6 79.5 77.6 73.3 70.0 67.7 63 4 63.4 56.5 50.0 49.8 47.9 42.9 36.6 28.1 20.5 11.1 8.1 61 6.1 4.9 4.3 3.8

Nominal Designation 65Ni-28Mo-2Fe 65Ni-29.5Mo-2Cr-2Fe-Mn-W

300 51.7 51.7 51.5 50.3 48.6 46.3 42.9 41.4 40.3 38.9 36.5 35.2

400 68.9 68.9 68.7 66.8 64.8 61.7 57.0 55.0 53.6 51.6 48.9 46.5

Forgings ASTM B564 (A)

900 148.9 146.4 136.9 132.0 128.4 125.2 122.5 120.9 119.3 116.5 109.8 105.1 101.4 95 1 95.1 84.7 75.2 74.8 71.8 64.2 54.9 42.5 30.8 16.7 12.1 91 9.1 7.4 6.5 5.7

Forgings ASTM B462 (A) ASTM B462 (A)

Work Pressure (Bar) 600 103.4 103.4 103.0 100.3 97.2 92.7 85.7 82.6 80.4 77.6 73.3 70.0

900 155.1 155.1 154.6 150.6 145.8 139.0 128.6 124.0 120.7 116.5 109.8 105.1

Plates ASTM B409 (A)

1500 248.2 244.0 228.1 219.9 214.0 208.7 204.1 201.6 198.8 194.1 183.1 175.1 169.0 158 2 158.2 140.9 125.5 124.9 119.7 107.0 91.2 70.7 51.3 27.8 20.1 15 1 15.1 12.4 10.8 9.5

2500 413.7 406.7 380.1 366.6 356.7 347.9 340.2 336.0 331.3 323.2 304.9 291.6 281.8 263 9 263.9 235.0 208.9 208.0 199.5 178.5 152.0 117.7 85.6 46.3 33.6 25 2 25.2 20.6 18.0 15.8

Plates ASTM B333 (A) ASTM B333 (A)

1500 258.6 258.6 257.6 250.8 243.4 231.8 214.4 206.6 201.1 194.1 183.1 175.1

2500 430.9 430.9 429.4 418.2 405.4 386.2 357.1 344.3 335.3 323.2 304.9 291.6

GROUP 3.8 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No 54Ni-16Mo-15Cr ASTM B462 (A,B) ASTM B575 (A,B) N10276 Hastelloy C-276 N06625 Inconel 625 60Ni-22Cr-9Mo-3.5Cb ASTM B564 (C,D,E) ASTM B443 (C,D,E) N10001 Hastelloy B 62Ni-28Mo-5Fe ASTM B333 (A,F) N10003 Hastelloy N 70Ni 16Mo 7Cr 5Fe 70Ni-16Mo-7Cr-5Fe ASTM B434 © N06455 Hastelloy C-4 61Ni-16Mo-16Cr ASTM B575 (A,F) N08825 Incoloy 825 42Ni-21.5Cr-3Mo-2.3Cu ASTM B564 (C,G) ASTM B424 (C,G) N06022 Hastelloy C-22 55Ni-21Cr-13.5Mo ASTM B462 (A,B,H) ASTM B575 (A,B,H) N06200 Hastelloy C-2000 55Ni-23Cr-16Mo-1.6Cu ASTM B462 (A,F) ASTM B575 (A,F) (A) Use solution annealed material only. (B) Not to be used over 675 °C. © Use annealed material only. (D) Not to be used over 645 °C. Alloy N06625 in the annealed condition is subject to severe loss of impact strength at room temperatures after exposure in the range 538 °C to 760 °C. (E) Grade 1. (F) Not to be used over 425 °C. (G) Not to be used over 538 °C. (H) Alloy N06022 in the solution annealed condition is subject to severe loss impact strength at room temperature after exposure to temperatures in range of 538 °C to 675 °C.

C CHAOW WEI - AN NSI /AS SME B16.5

ANSI / ASME B16.5

Page 10

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

ANSI / ASME B16.5

Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700

150 20.0 19.5 17.7 15.8 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

300 51.7 51.7 51.5 50.3 48.3 46.3 42.9 41.4 40.3 38.9 36.5 35.2 33.7 31.7 28.2 25.2 25.0 24 0 24.0 21.6 18.3 14.1 11.5 8.8

400 68.9 68.9 68.7 66.8 64.5 61.7 57.0 55.0 53.6 51.6 48.9 46.5 45.1 42.3 37.6 33.4 33.4 31 9 31.9 28.6 24.3 18.8 15.4 11.7

Work Pressure (Bar) 600 103.4 103.4 103.0 100.3 96.7 92.7 85.7 82.6 80.4 77.6 73.3 70.0 67.7 63.4 56.5 50.0 49.8 47 9 47.9 42.9 36.6 28.1 23.0 17.5

900 155.1 155.1 154.6 150.6 145.0 139.0 128.6 124.0 120.7 116.5 109.8 105.1 101.4 95.1 84.7 75.2 74.8 71 8 71.8 64.2 54.9 42.2 34.6 26.3

1500 258.6 258.6 257.6 250.8 241.7 231.8 214.4 206.6 201.1 194.1 183.1 175.1 169.0 158.2 140.9 125.5 124.9 119 7 119.7 107.0 91.2 70.4 57.6 43.8

2500 430.9 430.9 429.4 418.2 402.8 386.2 357.1 344.3 335.3 323.2 304.9 291.6 281.8 263.9 235.0 208.9 208.0 199 5 199.5 178.5 152.0 117.3 96.0 73.0

GROUP 3.9 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No 47Ni-22Cr-9Mo-18Fe ASTM B572 (A,B) ASTM B435 (A) N06002 Hastelloy X 21Ni–30Fe–22Cr–18Co–3Mo–3W R30556 Haynes 556 ASTM B572 (A,B) ASTM B435 (A) (A) Use annnealed material only. (B) The chemical composition, mechanical properties, heat treating requirements, and grain size requirements shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and markings shall be in accordance with ASTM B 564. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 20.0 19.5 17.7 15.8 13 8 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

300 51.7 51.7 51.5 47.6 44 3 44.3 41.6 39.5 38.6 37.9 37.3 36.5 35.2 33.7 31.7 28.2 25.2 25.0 24.0 21.6 18.3 14.1 12.4 10.1 7.9 5.9 4.6 3.5 2.8

400 68.9 68.9 68.7 63.4 59 1 59.1 55.4 52.7 51.5 50.5 49.8 48.9 46.5 45.1 42.3 37.6 33.4 33.3 31.9 28.6 24.3 18.9 16.9 13.4 10.5 7.9 6.2 4.8 3.8

Work Pressure (Bar) 600 103.4 103.4 103.0 95.2 88 6 88.6 83.1 79.0 77.2 75.8 74.7 73.3 70.0 67.7 63.4 56.5 50.0 49.8 47.9 42.9 36.6 28.1 25.2 20.0 15.4 11.7 9.0 7.0 5.9

900 155.1 155.1 154.6 142.8 132 9 132.9 124.7 118.5 115.8 113.7 112.0 109.8 105.1 101.4 95.1 84.7 75.2 74.8 71.8 64.2 54.9 42.2 37.6 29.8 23.2 17.6 13.7 10.5 8.6

1500 258.6 258.6 257.6 237.9 221 5 221.5 207.9 197.4 193.0 189.5 186.6 183.1 175.1 169.0 158.2 140.9 125.5 124.9 119.7 107.0 91.2 70.4 62.7 49.7 38.6 29.6 22.8 17.4 14.1

2500 430.9 430.9 429.4 396.5 369 2 369.2 346.4 329.1 321.7 315.8 311.1 304.9 291.6 281.8 263.9 235.0 208.9 208.0 199.5 178.5 152.0 117.3 104.5 83.0 64.4 49.1 38.0 29.2 23.8

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area W Wenzhou, h 325000, 325000 Zh Zhejiang, ji P P.R.China R Chi Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

C CHAOW WEI - ANSI /AS SME B16.5

GROUP 3.8 MATERIAL

Page 11

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

ANSI / ASME B16.5 GROUP 3.10 MATERIAL Alloy Name UNS No ATI JS700 N08700 (A) Use solution annealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350

150 20.0 19.5 17.7 15 8 15.8 13.8 12.1 10.2 9.3 8.4

Nominal Designation 25Ni-46Fe-21Cr-5Mo

300 51.7 51.7 51.5 47 1 47.1 44.3 42.8 41.3 40.4 38.9

400 68.9 68.9 68.7 62 8 62.8 59.0 57.1 55.1 53.8 51.9

Forgings -

Work Pressure (Bar) 600 103.4 103.4 103.0 94 2 94.2 88.5 85.6 82.7 80.7 77.8

900 155.1 155.1 154.6 141 3 141.3 132.8 128.4 124.0 121.1 116.7

Plates ASTM B599 (A)

1500 258.6 258.6 257.6 235 5 235.5 221.3 214.0 206.7 201.8 194.5

2500 430.9 430.9 429.4 392 5 392.5 368.9 356.6 344.5 336.4 324.2

Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375

150 19.7 18.8 15.4 14.4 13.3 12.1 10.2 9.3 8.4 7.4

300 51.3 49.1 41.1 37.5 34.7 32.0 30.0 29.2 28.7 28.2

GROUP 3.12 MATERIAL Alloy Name UNS No N08320 Hastelloy 20MOD N06985 Hastelloy G-3 N08367 Incoloy 25-6HN (A) Use U solution l i annnealed l d material i l only. l Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425

150 17.8 17.5 16.3 15.4 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5

-29 to 38 50 100 150 200 250 300 325 350 375 400 425

150 20.0 19.5 17.7 15.8 13.8 12.1 10.2 93 9.3 8.4 7.4 6.5 5.5

Work Pressure (Bar) 600 102.6 98.3 82.1 75.0 69.3 64.0 60.0 58.5 57.3 56.5

Nominal Designation 26Ni-42Fe-22Cr-5Mo 47Ni-22Cr-20Fe-7Mo 46Fe-24Ni-21Cr-6Mo-Cu-N

300 46.3 45.6 42.5 40.1 37.3 34.9 33.1 32.3 31.6 31.0 30.4 29.8

GROUP 3.13 MATERIAL Alloy Name UNS No N06975 Nimonic 75 N08031 Nicrofer 3127 hMO (A) Use solution annnealed material only. only Temp, °C

400 68.4 65.5 54.7 50.0 46.2 42.6 40.0 39.0 38.2 37.7

400 61.8 60.8 56.7 53.5 49.8 46.5 44.1 43.1 42.1 41.4 40.6 39.8

300 51.7 51.7 48.2 45.8 43.6 41.5 39.4 38 4 38.4 37.7 37.2 36.5 35.2

400 68.9 68.9 64.2 61.0 58.1 55.3 52.5 51 3 51.3 50.3 49.5 48.9 46.5

Forgings ASTM B462

Work Pressure (Bar) 600 92.7 91.1 85.1 80.3 74.6 69.8 66.2 64.6 63.2 62.0 60.8 59.7

Nominal Designation 49Ni-25Cr-18Fe-6Mo Ni-Fe-Cr-Mo-Cu-Low Carbon (B) Use annealed material only. only

900 153.9 147.4 123.2 112.5 104.0 95.9 90.0 87.7 86.0 84.7

900 139.0 136.7 127.6 120.4 112.0 104.7 99.3 97.0 94.8 93.0 91.3 89.5

Forgings ASTM B564 (B)

Work Pressure (Bar) 600 103.4 103.4 96.3 91.6 87.1 82.9 78.7 76 9 76.9 75.5 74.3 73.3 70.0

900 155.1 155.1 144.5 137.4 130.7 124.4 118.1 115 3 115.3 113.2 111.5 109.8 105.1

1500 256.5 245.7 205.3 187.5 173.4 159.9 150.1 146.1 143.4 141.2

2500 427.5 409.6 342.1 312.5 288.9 266.5 250.1 243.6 238.9 235.4

Plates ASTM B620 ASTM B582 ASTM B688

1500 231.7 227.8 212.7 200.7 186.6 174.5 165.5 161.6 158.1 155.1 152.1 149.1

2500 386.1 379.7 354.5 334.6 311.0 290.8 275.9 269.3 263.4 258.5 253.5 248.5

Plates ASTM B582 (A) ASTM B625 (B)

1500 258.6 258.6 240.8 228.9 217.8 207.3 196.8 192 2 192.2 188.7 185.8 183.1 175.1

2500 430.9 430.9 401.4 381.6 362.9 345.5 328.1 320 3 320.3 314.5 309.7 304.9 291.6

C CHAOW WEI - AN NSI /AS SME B1 16.5

GROUP 3.11 MATERIAL Nominal Designation Alloy Name Forgings Plates UNS No N08904 904L 44Fe-25Ni-21Cr-Mo ASTM A479 (A,B) ASTM A240 (A) ((A)) Use annnealed material only. y (B) The chemical composition, mechanical properties, heat treating requirements, and grain size requirements shall conform to the applicable ASTM specification. The manufacturing procedures, tolerances, tests, certification, and markings shall be in accordance with ASTM B 564.

Page 12

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 3.14 MATERIAL Alloy Name UNS No N06007 Hastelloy G N06030 Hastelloy G-30 N06035 Hastelloy G-35 (A) Use solution annnealed material only. (B) Not to be used over 425°C. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538

150 19.0 18.6 17.0 15.8 13.8 12.1 10.2 9.3 8.4 7.4 65 6.5 5.5 4.6 3.7 2.8 1.4

Nominal Designation 47Ni-22Cr-19Fe-6Mo 40Ni-29Cr-15Fe-5Mo 58Ni–33Cr–8Mo

300 49.6 48.6 44.3 41.3 39.1 37.4 36.1 35.6 35.2 34.9 34 6 34.6 34.4 33.7 31.7 28.2 25.2

GROUP 3.15 MATERIAL Alloy Name UNS No N08810 Incoloy 800H (A) Use solution annnealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 15.9 15.6 14.5 13.7 13.0 12.1 10.2 93 9.3 8.4 7.4 6.5 5.5 4.6 3.7 2.8 1.4 -

400 66.2 64.7 59.0 55.1 52.1 49.9 48.2 47.4 46.9 46.5 46 1 46.1 45.9 45.1 42.3 37.6 33.4

Work Pressure (Bar) 600 99.3 97.1 88.6 82.6 78.2 74.8 72.2 71.1 70.3 69.7 69 2 69.2 68.9 67.7 63.4 56.5 50.0

Nominal Designation 33Ni-42Fe-21Cr

300 41.4 40.6 37.8 35.9 33.9 32.3 30.7 30 1 30.1 29.4 28.7 28.3 27.7 27.2 26.8 26.3 25.2 25.0 24.0 21.6 18.3 14.1 12.4 10.1 7.9 5.9 4.6 3.5 2.8

400 55.2 54.2 50.4 47.8 45.2 43.0 41.0 40 1 40.1 39.2 38.3 37.7 36.9 36.3 35.7 35.1 33.4 33.3 31.9 28.6 24.3 18.9 16.9 13.4 10.5 7.9 6.2 4.8 3.8

Forgings ASTM B462 (A,B) ASTM B462 (A,B)

900 148.9 145.7 132.8 124.0 117.3 112.2 108.3 106.7 105.5 104.6 103 7 103.7 103.3 101.4 95.1 84.7 75.2

Forgings ASTM B564 (A)

Work Pressure (Bar) 600 82.7 81.3 75.6 71.7 67.9 64.5 61.5 60 1 60.1 58.8 57.4 56.5 55.3 54.4 53.5 52.6 50.0 49.8 47.9 42.9 36.6 28.1 25.2 20.0 15.4 11.7 9.0 7.0 5.9

900 124.1 121.9 113.4 107.6 101.8 96.8 92.2 90 2 90.2 88.3 86.2 84.8 83.0 81.7 80.3 79.0 75.2 74.8 71.8 64.2 54.9 42.5 37.6 29.8 23.2 17.6 13.7 10.5 8.6

Plates ASTM B582 (A) ASTM B582 (A,B) ASTM B575 (A,B)

1500 248.2 242.8 221.4 206.6 195.4 187.0 180.6 177.9 175.8 174.3 172 9 172.9 172.1 169.0 158.2 140.9 125.5

2500 413.7 404.6 369.0 344.3 325.7 311.6 300.9 296.4 293.1 290.6 288 1 288.1 286.9 281.8 263.9 235.0 208.9

Plates ASTM B409 (A)

1500 206.8 203.2 189.0 179.3 169.6 161.3 153.7 150 3 150.3 147.1 143.6 141.3 138.4 136.1 133.9 131.6 125.5 124.9 119.7 107.0 91.2 70.7 62.7 49.7 38.6 29.6 22.8 17.4 14.1

2500 344.7 338.7 315.0 298.9 282.7 268.9 256.2 250 5 250.5 245.2 239.4 235.6 230.6 226.8 223.1 219.4 208.9 208.0 199.5 178.5 152.0 117.7 104.5 83.0 64.4 49.1 38.0 29.2 23.8

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area W Wenzhou, h 325000, 325000 Zh Zhejiang, ji P P.R.China R Chi Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

C CHAOW WEI - ANSI /AS SME B16.5

ANSI / ASME B16.5

Page 13

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Pressure Temperature Rating

GROUP 3.16 MATERIAL Alloy Name UNS No N08330 Incoloy 330 (A) Use solution annnealed material only. Temp, °C -29 to 38 50 100 150 200 250 300 325 350 375 400 425 450 475 500 538 550 575 600 625 650 675 700 725 750 775 800 816

150 19.0 18.5 16.7 15.6 13.8 12.1 10.2 9.3 8.4 7.4 6.5 5.5 4.6 37 3.7 2.8 1.4 -

Nominal Designation 35Ni-19Cr-1.25Si

300 49.6 48.4 43.5 40.8 38.6 36.8 35.2 34.5 33.9 33.2 32.6 32.0 31.4 30 8 30.8 28.2 25.2 25.0 21.9 17.4 13.8 11.0 9.1 7.6 6.1 48 4.8 3.9 3.1 2.6

400 66.2 64.5 58.0 54.4 51.5 49.0 47.0 46.0 45.2 44.2 43.4 42.6 41.8 41 0 41.0 37.6 33.4 33.3 29.2 23.2 18.3 14.7 12.1 10.1 8.1 64 6.4 5.2 4.2 3.5

Forgings -

Work Pressure (Bar) 600 99.3 96.7 87.0 81.6 77.2 73.5 70.4 69.0 67.8 66.3 65.1 64.0 62.8 61 6 61.6 56.5 50.0 49.8 43.7 34.8 27.5 22.1 18.2 15.2 12.2 95 9.5 7.7 6.3 5.2

900 148.9 145.1 13.5 122.5 115.8 110.3 105.6 103.6 101.7 99.5 97.7 95.9 94.1 92 4 92.4 84.7 75.2 74.8 65.6 52.3 41.3 33.1 27.3 22.8 18.3 14 3 14.3 11.6 9.4 7.8

Plates ASTM B536 (A)

1500 248.2 241.8 217.5 204.1 192.9 183.8 176.1 172.6 169.4 165.8 162.9 159.9 156.9 153 9 153.9 140.9 125.5 124.9 109.4 87.1 68.8 55.1 45.6 38.0 30.5 23 8 23.8 19.4 15.6 13.0

2500 413.7 403.1 362.4 340.2 321.6 306.3 293.4 287.7 282.4 276.4 271.4 266.5 261.5 256 5 256.5 235.0 208.9 208.0 182.3 145.1 114.6 91.9 75.9 63.3 50.9 39 7 39.7 32.3 26.1 21.7

Monel, Inconel, Incoloy, Nimomic, Nicrofer are registered trademarks of Special Metal Corporation group of companies. Hastelloy, Haynes are registered trademark of Haynes International inc. ATI is registered trademark of ATI Properties, Inc. or its affiliated companies

CHAOWEI 1'st Factory start production in 1998 No. 128 Zhongxing Rd, Wenzhou Industrial Park Area Wenzhou, 325000, Zhejiang, P.R.China.

CHAOWEI 2'nd Factory start production in 2010 No. 128 Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China. Zhejiang CHAOWEI New Material Co.,Ltd. g Rd,, Longwan g Central Industrial Area No.128,, Houzhang Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

C CHAOW WEI - AN NSI /AS SME B1 16.5

ANSI / ASME B16.5

Page 14

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 150#

ANSI / ASME B16.5 SOCKET WELDING

LAP JOINT

BLIND

THREADED

SLIP ON

WELDING NECK

1

2

3

4

5

6

7

8

9

Length Through Hub

Nominal Min. Min Outside Pipe Thickness Thickness Dia Size Notes 2-4 Lap Joint

NPS

O

tf

tf

Dia. Of Hub

X

10

11

12

Min. Thread Length

Bore

Hub Dia. Beginning of Chamfer Threaded Minimum Welding Welding Slip On Slip On Minimun Lapped Threaded Neck Neck Lapped Socket Socket g g Welding Welding Ah

Y

Y

Y

T

B

B

1/2" 90 9.6 11.2 30 21.3 14 16 46 16 22.2 3/4" 100 11.2 12.7 38 26.7 14 16 51 16 27.7 1" 110 12.7 14.3 49 33.4 16 17 54 17 34.5 1 1/4" 115 14.3 15.9 59 42.2 19 12 56 21 43.2 1 1/2" 125 15.9 17.5 65 48.3 21 22 60 22 49.5 2" 150 17.5 19.1 78 60.3 24 25 62 25 61.9 2 1/2" 180 20.7 22.3 90 73.0 27 29 68 29 74.6 3" 190 22.3 23.9 108 88.9 29 30 68 30 90.7 3 1/2" 215 22.3 23.9 122 101.6 30 32 70 32 103.4 4" 230 22.3 23.9 135 114.3 32 33 75 33 116.1 5" 255 22.3 23.9 164 141.3 35 36 87 36 143.8 6" 280 23.9 25.4 192 168.3 38 40 87 40 170.7 8" 345 27.0 28.6 246 219.1 43 44 100 44 221.5 10" 405 28.6 30.2 305 273.0 48 49 100 49 276.2 12" 485 30.2 31.8 365 323.8 54 56 113 56 327.0 14" 535 33.4 35.0 400 355.6 56 79 125 57 359.2 16" 595 35.0 36.6 457 406.4 62 87 125 64 410.5 18" 18 635 38 1 38.1 39 7 39.7 505 457 0 457.0 67 97 138 68 461 8 461.8 20" 700 41.3 42.9 559 508.0 71 103 143 73 513.1 24" 815 46.1 47.7 663 610.0 81 111 151 83 616.0 Note 1 : This dimension is for large end of hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, dimension is defined as the diameter at the intersection between the hub taper and back face of the flange. Note 2 : Note 3 : Note 4 : Note 5 :

13

Welding Neck Socket Welding Note 5 B

14

15

16

Min. Counter Corner Bore Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

22.9 15.8 3 28.2 20.9 3 34.9 26.6 3 43.7 35.1 5 50.0 40.9 6 62.5 52.5 8 75.4 62.7 8 91.4 77.9 10 104.1 90.1 10 116.8 102.3 11 144.4 128.2 11 171.4 154.1 13 222.2 202.7 13 277.4 254.6 13 328.2 304.8 13 360.2 13 To be 411.2 13 specified 462 3 462.3 13 by the 514.4 13 Purchaser 616.0 13 slip-on, socket-welding, and lapped

D

Q

10 11 13 14 16 17 19 21 flanges. This

The minimum thickness of these loose flanges, in sizes NPS 31⁄2 and smaller, is slightly greater than the thickness of flanges on fittings, These flanges may be supplied with a flat face. The flat face may be either the full tf dimension of thickness plus 2 mm or the tf dimension thickness without the raised face The flange dimensions illustrated are for regularly furnished 2-mm raised face (except lapped) Dimensions in Column 13 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. Thickness of standard wall is the same as Schedule 40 in sizes NPS 10 and smaller Zhejiang CHAOWEI New Material Co.,Ltd. Co Ltd No.128, Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 15

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 300#

ANSI / ASME B16.5 SOCKET WELDING

LAP JOINT

BLIND

THREADED

SLIP ON

WELDING NECK

1

2

3

4

5

6

7

8

9

Length Through Hub

Nominal Min. Min Outside Pipe Thickness Thickness Dia Size Notes 2-3 Lap Joint

NPS

O

tf

tf

Dia. Of Hub

X

10

11

12

Min. Thread Length

Bore

Hub Dia. Beginning of Chamfer Threaded Minimum Welding Welding Slip On Slip On Minimun Lapped Threaded Neck Neck Lapped Socket Socket g g Welding Welding Ah

Y

Y

Y

T

13

B

B

1/2" 95 12.7 14.3 38 21.3 21 22 51 16 22.2 3/4" 115 14.3 15.9 48 26.7 24 25 56 16 27.7 1" 125 15.9 17.5 54 33.4 25 27 60 18 34.5 1 1/4" 135 17.5 19.1 64 42.2 25 27 64 21 43.2 1 1/2" 155 19.1 20.7 70 48.3 29 30 67 23 49.5 2" 165 20.7 22.3 84 60.3 32 33 68 29 61.9 2 1/2" 190 23.9 25.4 100 73.0 37 38 75 32 74.6 3" 210 27.0 28.6 117 88.9 41 43 78 32 90.7 3 1/2" 230 28.6 30.2 133 101.6 43 44 79 37 103.4 4" 255 30.2 31.8 146 114.3 46 48 84 37 116.1 5" 280 33.4 35.0 178 141.3 49 51 97 43 143.8 6" 320 35.0 36.6 206 168.3 51 52 97 47 170.7 8" 380 39.7 41.3 260 219.1 60 62 110 51 221.5 10" 445 46.1 47.7 321 273.0 65 95 116 56 276.2 12" 520 49.3 50.8 375 323.8 71 102 129 61 327.0 14" 585 52.4 54.0 425 355.6 75 111 141 64 359.2 16" 650 55.6 57.2 483 406.4 81 121 144 69 410.5 18" 18 710 58 8 58.8 60 4 60.4 533 457 0 457.0 87 130 157 70 461 8 461.8 20" 775 62.0 63.5 587 508.0 94 140 160 74 513.1 24" 915 68.3 69.9 702 610.0 105 152 167 83 616.0 Note 1 : This dimension is for large end of hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, dimension is defined as the diameter at the intersection between the hub taper and back face of the flange.

Welding Neck Socket Welding Note 4 B

14

15

16

Min. Counter Corner Bore Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

22.9 15.8 3 28.2 20.9 3 34.9 26.6 3 43.7 35.1 5 50.0 40.9 6 62.5 52.5 8 75.4 62.7 8 91.4 77.9 10 104.1 90.1 10 116.8 102.3 11 144.4 128.2 11 171.4 154.1 13 222.2 202.7 13 277.4 254.6 13 328.2 304.8 13 360.2 13 To be 411.2 13 specified 462 3 462.3 13 by the 514.4 13 Purchaser 616.0 13 slip-on, socket-welding, and lapped

D

Q

10 11 13 14 16 17 19 21 flanges.

23.6 29.0 35.8 44.4 50.3 63.5 76.2 92.2 104.9 117.6 144.4 171.4 222.2 276.2 328.6 360.4 411.2 462 0 462.0 512.8 614.4 This

Note 2 : These flanges may be supplied with a flat face. The flat face may be either the full tf dimension thickness plus 2-mm or the tf dimension thickness without the raised face he Note 3 : The flange dimensions illustrated are for regularly furnished 2-mm raised face (except lapped) Note 4 : Dimensions in Column 13 correspond to the inside diameters of pipe as given in ASME B36.10M for standard wall pipe. Thickness of standard wall is the same as Schedule 40 in sizes NPS 10 and smaller Zhejiang CHAOWEI New Material Co.,Ltd. Co Ltd No.128, Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 16

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 400#

ANSI / ASME B16.5 THREADED

LAP JOINT

BLIND

SLIP ON

1

2

WELDING NECK

3

4

5

6

7

8

9

Length Through Hub

Nominal Min Outside Min. Pipe Thickness Dia Thickness Size Lap Joint

NPS

O

tf

tf

Dia. Of Hub

X

10

11

Min. Thread Length

12 Bore

Hub Dia. Beginning of Chamfer Welding Threaded Welding Minimum Minimun Lapped Threaded Neck Slip On Neck Slip On Lapped

Ah

Y

Y

Y

T

13

B

B

Welding Neck

B

14

15

16

Min. Counter Corner Bore Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

D

Q

To be specified by the Purchaser

1/2" 95 14.3 38 21.3 22 22 52 16 22.2 22.9 3 23.6 3/4" 115 15.9 48 26.7 25 25 57 16 27.7 28.2 3 29.0 1" 125 17.5 54 33.4 27 27 62 18 34.5 34.9 3 35.8 1 1/4" 135 20.7 64 42.2 29 29 67 21 43.2 43.7 5 44.4 1 1/2" 155 22.3 70 48.3 32 32 70 23 49.5 50.0 6 50.6 2" 165 25.4 84 60.3 37 37 73 29 61.9 62.5 8 63.5 2 1/2" 190 28.6 100 73.0 41 41 79 32 74.6 75.4 8 76.2 3" 210 31.8 117 88.9 46 46 83 35 90.7 91.4 10 92.2 3 1/2" 230 35.0 133 101.6 49 49 86 40 103.4 104.1 10 104.9 4" 255 35.0 146 114.3 51 51 89 37 116.1 116.8 11 117.6 5" 280 38.1 178 141.3 54 54 102 43 143.8 144.4 11 144.4 6" 320 41.3 206 168.3 57 57 103 46 170.7 171.4 13 171.4 8" 380 47.7 260 219.1 68 68 117 51 221.5 222.2 13 222.2 10" 445 54.0 321 273.0 73 102 124 56 276.2 277.4 13 276.2 12" 520 57.2 375 323.8 79 108 137 61 327.0 328.2 13 328.6 14" 585 60.4 425 355.6 84 117 149 64 359.2 360.2 13 360.4 16" 650 63.5 483 406.4 94 127 152 69 410.5 411.2 13 411.2 18" 18 710 66 7 66.7 533 457 0 457.0 90 137 165 70 461 8 461.8 462 3 462.3 13 462 0 462.0 20" 775 69.9 587 508.0 102 146 168 74 513.1 514.4 13 512.8 24" 915 76.2 702 610.0 114 159 175 83 616.0 616.0 13 614.4 Note 1 : This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange. Note 2 : Socket welding flanges may be provided in NPS 1⁄2 through NPS 21⁄2, using Class 600 dimensions.

Zhejiang CHAOWEI New Material Co.,Ltd. No 128 Houzhang Rd No.128, Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 17

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 600#

ANSI / ASME B16.5 SOCKET WELDING

LAP JOINT

BLIND

THREADED

SLIP ON

WELDING NECK

1

2

3

4

5

6

7

8

9

Length Through Hub

Nominal Min. Min Outside Pipe Thickness Thickness Dia Size Notes Lap Joint

NPS

O

tf

tf

Dia. Of Hub

X

10

11

Min. Thread Length

12 Bore

Hub Dia. Beginning of Chamfer Threaded Minimum Welding Welding Slip On Slip On Minimun Lapped Threaded Neck Neck Lapped Socket Socket g g Welding Welding Ah

Y

Y

Y

T

13

B

B

Welding Neck Socket g Welding B

14

16

Min. Counter Corner Bore Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

1/2" 95 14.3 38 21.3 22 22 52 16 22.2 22.9 3 3/4" 115 15.9 48 26.7 25 25 57 16 27.7 28.2 3 1" 125 17.5 54 33.4 27 27 62 18 34.5 34.9 3 1 1/4" 135 20.7 64 42.2 29 29 67 21 43.2 43.7 5 1 1/2" 155 22.3 70 48.3 32 32 70 23 49.5 50.0 6 2" 165 25.4 84 60.3 37 37 73 29 61.9 62.5 8 2 1/2" 190 28.6 100 73.0 41 41 79 32 74.6 75.4 8 3" 210 31.8 117 88.9 46 46 83 35 90.7 91.4 10 3 1/2" 230 35.0 133 101.6 49 49 86 40 103.4 104.1 10 4" 275 38.1 152 114.3 54 54 102 42 116.1 116.8 11 5" 330 44.5 189 141.3 60 60 114 48 143.8 144.4 13 6" 355 47.7 222 168.3 67 67 117 51 170.7 171.4 13 8" 420 55.6 273 219.1 76 76 133 58 221.5 222.2 13 10" 510 63.5 343 273.0 86 111 152 66 276.2 277.4 13 12" 560 66.7 400 323.8 92 117 156 70 327.0 328.2 13 14" 605 69.9 432 355.6 94 127 165 74 359.2 360.2 13 16" 685 76.2 495 406.4 106 140 178 78 410.5 411.2 13 18" 18 745 82 6 82.6 546 457 0 457.0 117 152 184 80 461 8 461.8 462 3 462.3 13 20" 815 88.9 610 508.0 127 165 190 83 513.1 514.4 13 24" 940 101.6 718 610.0 140 184 203 93 616.0 616.0 13 Note 1 : This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange. To be specified by the Purchaser

15

D

Q

10 23.6 11 29.0 13 35.8 14 44.4 16 50.6 17 63.5 19 76.2 21 92.2 104.9 117.6 144.4 171.4 222.2 276.2 328.6 360.4 411.2 462 0 462.0 512.8 614.4 lapped flanges.

Zhejiang CHAOWEI New Material Co.,Ltd. No 128 Houzhang Rd No.128, Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 18

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 900#

ANSI / ASME B16.5 THREADED

LAP JOINT

BLIND

SLIP ON

1

2

WELDING NECK

3

4

5

6

7

8

9

Length Through Hub

Nominal Min Outside Min. Pipe Thickness Dia Thickness Size Lap Joint

NPS

O

tf

tf

Dia. Of Hub

X

10

11

Min. Thread Length

12 Bore

Hub Dia. Beginning of Chamfer Welding Threaded Welding Minimum Minimun Lapped Threaded Neck Slip On Neck Slip On Lapped

Ah

Y

Y

Y

T

13

B

B

Welding Neck

B

14

15

16

Min. Counter Corner Bore Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

D

Q

To be specified by the Purchaser

1/2" 120 22.3 38 21.3 32 32 60 23 22.2 22.2 3 23.6 3/4" 130 25.4 44 26.7 35 35 70 26 27.7 28.2 3 29.0 1" 150 28.6 52 33.4 41 41 73 29 34.5 34.9 3 35.8 1 1/4" 160 28.6 64 42.2 41 41 73 31 43.2 43.7 5 44.4 1 1/2" 180 31.8 70 48.3 44 44 83 32 49.5 50.0 6 50.6 2" 215 38.1 105 60.3 57 57 102 39 61.9 62.5 8 63.5 2 1/2" 245 41.3 124 73.0 64 64 105 48 74.6 75.4 8 76.2 3" 240 38.1 127 88.9 54 54 102 42 90.7 91.4 10 92.2 4" 290 44.5 159 114.3 70 70 114 48 116.1 116.8 11 117.6 5" 350 50.8 190 141.3 79 79 127 54 143.8 144.4 11 144.4 6" 380 55.6 235 168.3 86 86 140 58 170.7 171.4 13 171.4 8" 470 63.5 298 219.1 102 114 162 64 221.5 222.2 13 222.2 10" 545 69.9 368 273.0 108 127 184 72 276.2 277.4 13 276.2 12" 610 79.4 419 323.8 117 143 200 77 327.0 328.2 13 328.6 14" 640 85.8 451 355.6 130 156 213 83 359.2 360.2 13 360.4 16" 705 88.9 508 406.4 133 165 216 86 410.5 411.2 13 411.2 18" 785 101.6 565 457.0 152 190 229 89 461.8 462.3 13 462.0 20" 20 855 108 0 108.0 622 508 0 508.0 159 210 248 93 513 1 513.1 514 4 514.4 13 512 8 512.8 24" 1040 139.7 749 610.0 203 267 292 102 616.0 616.0 13 614.4 Note 1 : This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange. Note 2 : Socket welding flanges may be provided in NPS 1⁄2 through NPS 21⁄2, using Class 1500 dimensions.

Zhejiang CHAOWEI New Material Co.,Ltd. No 128 Houzhang Rd No.128, Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 19

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 1500#

ANSI / ASME B16.5 SOCKET WELDING

LAP JOINT

BLIND

THREADED

SLIP ON

WELDING NECK

1

2

3

4

5

6

7

8

9

Length Through Hub

Nominal Min. Min Outside Pipe Thickness Thickness Dia Size Notes Lap Joint

NPS

O

tf

tf

Dia. Of Hub

X

10

11

Min. Thread Length

12 Bore

Hub Dia. Beginning of Chamfer Threaded Minimum Welding Welding Slip On Slip On Minimun Lapped Threaded Neck Neck Lapped Socket Socket g g Welding Welding Ah

Y

Y

Y

T

13

B

B

Welding Neck Socket g Welding B

14

16

Min. Counter Corner Bore Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

1/2" 120 22.3 38 21.3 32 32 60 23 22.2 22.2 3 3/4" 130 25.4 44 26.7 35 35 70 26 27.7 28.2 3 1" 150 28.6 52 33.4 41 41 73 29 34.5 34.9 3 1 1/4" 160 28.6 64 42.2 41 41 73 31 43.2 43.7 5 1 1/2" 180 31.8 70 48.3 44 44 83 32 49.5 50.0 6 2" 215 38.1 105 60.3 57 57 102 39 61.9 62.5 8 2 1/2" 245 41.3 124 73.0 64 64 105 48 74.6 75.4 8 3" 265 47.7 133 88.9 73 117 91.4 10 4" 310 54.0 162 114.3 90 124 116.8 11 5" 375 73.1 197 141.3 105 156 144.4 11 6" 395 82.6 229 168.3 119 171 171.4 13 8" 485 92.1 292 219.1 143 213 222.2 13 10" 585 108.0 368 273.0 178 254 277.4 13 12" 675 129.3 451 323.8 219 283 328.2 13 14" 750 133.4 495 355.6 241 298 360.2 13 16" 825 146.1 552 406.4 260 311 411.2 13 18" 915 162.0 597 457.0 276 327 462.3 13 20" 20 985 177 8 177.8 641 508 0 508.0 292 356 514 4 514.4 13 24" 1170 203.0 762 610.0 330 406 616.0 13 Note 1 : This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and This dimension is defined as the diameter at the intersection between the hub taper and back face of the flange. To be specified by the Purchaser

15

D

Q

10 23.6 11 29.0 13 35.8 14 44.4 16 50.6 17 63.5 19 76.2 lapped flanges.

Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 20

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Dimension Class 2500#

ANSI / ASME B16.5 WELDING NECK

LAP JOINT

BLIND

THREADED

1

2

3

4

Nominal Min. Min Outside Pipe Thickness Thickness Dia Size Notes Lap Joint

NPS

O

tf

tf

5

Dia. Of Hub

X

6

7

8

9

10

11

Min. Thread Length

Length Through Hub Hub Dia. Beginning of Chamfer Welding Welding Threaded Lapped Threaded Neck Neck

Ah

Y

Y

Y

T

12

13

15

16 Min. Counter Bore

Bore

B

14

Minimun Lapped

Welding Neck

B

B

Corner Bore Depth radius of of Lapped Socket Threaded flange Flange and pipe

r

D

Q

To be specified by y the Purchaser

1/2" 135 30.2 43 21.3 40 40 73 29 22.2 3 23.6 3/4" 140 31.8 51 26.7 43 43 79 32 28.2 3 29.0 1" 160 35.0 57 33.4 48 48 89 35 34.9 3 35.8 1 1/4" 185 38.1 73 42.2 52 52 95 39 43.7 5 44.4 1 1/2" 205 44.5 79 48.3 60 60 111 45 50.0 6 50.6 2" 235 50.9 95 60.3 70 70 127 51 62.5 8 63.5 2 1/2 1/2" 265 57 2 57.2 114 73 0 73.0 79 79 143 58 75 4 75.4 8 76 2 76.2 3" 305 66.7 133 88.9 92 168 91.4 10 4" 355 76.2 165 114.3 108 190 116.8 11 5" 420 92.1 203 141.3 130 229 144.4 11 6" 485 108.0 235 168.3 152 273 171.4 13 8" 550 127.0 305 219.1 178 318 222.2 13 10" 675 165.1 375 273.0 229 419 277.4 13 12" 760 184.2 441 323.8 254 464 328.2 13 NOTES: Note 1 : This dimension is for the large end of the hub, which may be straight or tapered. Taper shall not exceed 7 deg on threaded, slip-on, socket-welding, and lapped flanges. p and back face of the flange. g This dimension is defined as the diameter at the intersection between the hub taper

Zhejiang CHAOWEI New Material Co.,Ltd. g Rd,, Longwan g Central Industrial Area No.128,, Houzhang Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

Page 21

CHAOWEI

FLANGES http://www.chinachaowei.com

HIGH PERFORMANCE ALLOY SPECIALIST

Tolerances

ANSI / ASME B16.5 1. Center-to-Contact Surfaces and Center-to-End Tolerances Size Tolerance

Center-to-Contact Surfaces (Other than Ring Joint)

5. Length Through Hub on Welding Neck Flanges Size Tolerance NPS ≤ 4

+/- 1.5 mm

NPS ≤ 10

+/- 1.0 mm

+/- 0.03 in

NPS 5-10

+ 1.5 / - 3.0 mm

+/- 0.06 in + 0.06 / - 0.12 in

NPS ≥ 12

+/- 1.5 mm

+/- 0.03 in

NPS ≥ 12

+ 3.0 / - 5.0 mm

+ 0.12 / - 0.18 in

NPS ≤ 10

+/- 1.0 mm

+/- 0.03 in

NPS ≥ 12

+/- 1.5 mm

+/- 0.03 in

Center-to-End (Ring Joint) Tolerance

Lapped and Slip On Flanges Bore

NPS ≤ 10

+/- 2.0 mm

+/- 0.06 in

NPS ≤ 2 1/2

+/-0.8 mm

+/- 0.03 in

NPS ≥ 12

+/- 3.0 mm

+/- 0.12 in

NPS ≥ 3

+/-1.5 mm

+/- 0.06 in

NPS ≤ 10

+ 1.0 / - 0.0 mm

+ 0.03 / - 0.00 in

NPS ≤ 10

+/- 2.0 mm

+/- 0.06 in

NPS ≥ 12

+ 1.5 / - 0.0 mm

+ 0.06 / - 0.00 in

NPS ≥ 12

+/- 3.0 mm

+/- 0.12 in

+ 1.0 / - 0.0 mm + 1.5 / - 0.0 mm

+ 0.03 / - 0.00 in + 0.06 / - 0.00 in

+/-0.25 / 0 25 mm

+/0.01 / 0 01 iin

End-to-End (Ring Joint)

Counterbores, Threaded Flanges. NPS ≤ 10 NPS ≥ 12

2. Facings Size

Tolerance

ID and OD of la large ge and small tong tongue e and groove g oo e and female +/- 0.5 mm

+/- 0.02 in

OD 2.0 mm, RF tolerance

+/- 1.0 mm

+/- 0.03 in

OD 7.0 mm, RF tolerance

+/- 0.5 mm

+/- 0.02 in

3. Flange Thickness Size

Tolerance

NPS ≤ 18

+ 3.0 / - 0.0 mm

+ 0.12 / - 0.00 in

NPS ≥ 20

+ 5.0 / - 0.0 mm

+ 0.19 / - 0.00 in

4. Welding End Flange Ends and Hubs Size

Counterbores, Socket Welding NPS ≤ 1/2 1/2-3 3 7. Drilling and Facing Size

Tolerance

Bolt Circle Diameter

+/-1.5 mm

+/- 0.06 in

Bolt Hole to Bolt Hole

+/-0.8 mm

+/- 0.03 in

Bolt Circle Conc NPS ≤ 2 1/2

+/-0.8 mm

+/- 0.03 in

Bolt Circle Conc NPS ≥ 3

+/-1.5 mm

+/- 0.06 in

Tolerance

Outside Diameter NPS ≤ 5

+ 2.0 / - 1.0 mm

+ 0.09 / - 0.03 in

NPS ≥ 6

+ 4.0 / - 1.0 mm

+ 0.16 / - 0.03 in

NPS ≤ 10 NPS 12-18

+/- 1.0 mm +// 1.5 mm

+/- 0.03 in +// 0.06 in

NPS ≥ 20

+ 3.0 / - 1.5 mm

+ 0.12 / - 0.06 in

Inside Diameter

Backing Ring Contact Surface 2 ≤ NPS ≤ 24

+ 0.25 / - 0.0 mm + 0.01 / - 0.00 in

Hub Thickness the thickness of the hub at the welding end shall not be less than 871⁄2% of the nominal thickness of the pipe, having an under-tolerance of 12.5% for the pipe wall thickness to which the flange is to be attached or the minimumwall thickness as specified by the purchaser.

CHAOWEI 1'st Factory start production in 1998 No. 128 Zhongxing Rd, Wenzhou Industrial Park Area Wenzhou, 325000, Zhejiang, P.R.China.

CHAOWEI 2'nd Factory start production in 2010 No. 128 Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China. For further information and support, please contact us: Zhejiang CHAOWEI New Material Co.,Ltd. No.128, Houzhang Rd, Longwan Central Industrial Area Wenzhou, 325000, Zhejiang, P.R.China Tel: +86-577-8588-8800 Fax: +86-577-8588-8633 SUTANTO HARTONO ( [email protected] )

C CHAOW WEI - AN NSI /AS SME B1 16.5

Contact Surface-to-Contact Surface (Other than Ring Joint)

6. Flange Bore Diameter Size

Page 22