Download Appendix 3 - Operation Guide To The OMStar V500R006C02 For LTE Maintenance SOP...
Product Name
Confidentiality
OMStar
INTERNAL
Product Version OMStar V500R006
Total 77 Pages
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
(For internal use only)
Prepared by:
Wang Sen
Date:
Reviewed by:
Date:
Approved by:
Date:
2011-4-7
Huawei Technologies Co., Ltd. All Rights Reserved
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 1 of 77
Change History Date
Revision Version
Description
Author
2011-03-23
V0.1
Draft completed.
Wang Sen
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 2 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Contents 1 Overview....... Overview............................. ............................................ ............................................ ............................................ ............................................. .......................................... ...................6 6 1.1 Intended Audience.............................................................................................................................................6 1.2 Application Scope.............................................................................................................................................. Scope.............................................................................................................................................. 6 1.3 Precautions......................................................................................................................................................... Precautions.........................................................................................................................................................6 6 1.3.1 Precautions for Installing and Operating NIC..........................................................................................6 1.4 Software Acquisition Modes..............................................................................................................................7 1.5 Installation Requirements..................................................................................................................................8 1.5.1 Installation Environment Specification....................................................................................................8 1.5.2 Hard Disk Specification........................................................................................................................ Specification............................................................................................................................8 ....8 1.5.3 Descriptions of NIC Ports.........................................................................................................................9 Ports.........................................................................................................................9 1.5.4 Networking Modes...................................................................................................................................9 1.6 Introduction to the Installation and Operation of the OMStar.........................................................................10
2 Installing the SQL Server........ Server.............................. ............................................ ............................................ ........................................... ................................ ...........12 12 2.1 Precautions for Installing the SQL Server.......................................................................................................12 2.2 Installing the SQL Server 2000 Personal Edition............................................................................................12 2.3 Installing the SQL Server 2000 SP4................................................................................................................21
3 Installing the NIC............. NIC................................... ............................................ ............................................ ............................................ .........................................27 ...................27 3.1 Precautions for Installing the NIC...................................................................................................................27 3.2 Installing the NIC Tool....................................................................................................................................27
4 Installing the OMStar........ OMStar.............................. ............................................. ............................................. ............................................ ......................................31 ................31 4.1 Installing the OMStar Tool..............................................................................................................................31 4.2 Applying for and Installing a License....................................................................................... License..............................................................................................................35 .......................35
5 Using the NIC................ NIC...................................... ............................................ ............................................ ............................................ .............................................4 .......................41 1 5.1 Installing the Mediation Matching the NE Version.........................................................................................41 5.1.1 Precautions for Installing the Mediation Layer......................................................................................41 5.1.2 Procedure for Installing the Mediation Layer.........................................................................................41 5.2 Setting the IP Address of the FTP Server.......................................................................... Server.........................................................................................................43 ...............................43 5.3 Using the NIC to Collect Data.........................................................................................................................45 5.3.1 Creating an NE.......................................................................................................................................46 5.3.2 Customizing SOP Collection Scenario...................................................................................................47 5.3.3 Creating a Collection Ta Task.................................................................................................................... sk......................................................................................................................48 ..48
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 3 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
5.3.4 Viewing the Collection Result................................................................................................................52
6 Using the OMStar......... OMStar............................... ............................................ ............................................ ............................................ .............................................54 .......................54 6.1 Importing Data to SQL by Using Transdata....................................................................................................54 6.2 Analyzing Data by Using the OMStar.............................................................................................................62
7 Help Information... Information......................... ............................................ ............................................ ............................................ ............................................ ..............................66 ........66 8 FAQs.............. FAQs.................................... ............................................ ............................................ ............................................ ............................................ .........................................67 ...................67 8.1 FAQs Related to the SQL Server.....................................................................................................................67 8.1.1 How Do I Handle the SQL Server Installation Failure?.........................................................................67 8.1.2 How Do I Handle the Database Connection Failure?.............................................................................69 8.1.3 Can the MSDE 2000 Be Used?..............................................................................................................72 8.1.4 Can the SQL Server 2005 Be Used?......................................................................................... Used?.......................................................................................................72 ..............72 8.2 FAQs Related to the NIC.................................................................................................................................72 8.2.1 How Do I Handle the NIC Startup Failure?...........................................................................................72 8.2.2 How Do I Handle the Failure to Add NEs to the NIC?..........................................................................73 8.2.3 The System Displays the Message "Adaptation layer does not match the C version of the NE." When the User Adds an NE.......................................................................................................................................73 8.2.4 Data Collection Failure Scenarios (Configuration Data, Traffic Statistics Data, and MML Data)........73 8.2.5 How Do I Add NEs More Efficiently by Using the Batch Import Function?........................................74 8.3 FAQs Related to the OMStar and the Transdata..............................................................................................76 8.3.1 Is the OMStar Compatible with Office 2007?........................................................................................76 8.3.2 Does the OMStar Support Windows 7?........................................................................... 7?..................................................................................................76 .......................76 8.3.3 How Do I Handle the Failure to Import the OMStar License?..............................................................76 8.3.4 How Do I Handle the Case When OMStar License Prompts "Invalid license file: Incorrect License ID"?..................................................................................................................................................................77 8.3.5 Does the OMStar Support the Server/Client Mode?..............................................................................78
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 4 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Operation Guide to the OMStar V500R006C02 for LTE Mainte Maintenance nance SOP Keywords : Maintenance SOP, OMStar, NIC Abstract : This document provides guidance for quick installation and operation of the OMStar and the NIC for routine inspection and maintenance SOP. SOP. It does d oes not involve the details of specific technologies and services. In case of any exception or question related to the installation and use, you can refer to the FAQs FAQs to handle it or contact relevant engineers for assistance according to the help information. List of Abbreviations:
2022-4-21
Acronym or Abbreviation
Full Name
SOP
Standard Operation Procedure
NIC
Network Information Information Collection
OMStar
Operation&Maintenance Star
Transdata
Transdata
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 5 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
1
INTERNAL
Overview
1.1 Intended Audience This document is intended to guide readers to deploy MAINEX operation and maintenance (OM) tools (including the NIC and the OMStar) to implement automatic network inspection for routine OM tasks such as maintenance SOP. It is intended for engineers responsible for routine inspection and delivery of maintenance SOP.
1.2 Application Scope This document describes how to use the NIC V100R006C00SPC200/SPC300 V100R006C00SPC200/SPC300 and the OMStar V500R006C02 to support the maintenance SOP as follows:
1.3 Precautions 1.3.1 Precautions for Installing and Operating NIC The NIC can be installed successfully only if the source files of the NIC installation
package are saved saved in the directory directory that does not contain contain any Chinese character character and illegal character.
2022-4-21
The main program language edition and mediation layer language edition for the NIC installation must be consistent with the NE language edition.
Disable hard disk shutdown, standby mode, and sleep mode of the PC for NIC collection.
The source files of the installation package of the SQL Server 2000 must be saved in a directory that does not contain Chinese characters; otherwise, the installation may fail.
This document describes how to obtain, install, and use the NIC of English version.
Sufficient space should be available for installing the NIC and the OMStar.
The special notes on the tool installation and usage are marked red.
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 6 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
1.4 Software Acquisition Modes(For example as follows) Product Version
Tool
Description NIC_install
NIC
Version
Log in to http://support.huawei.com.
Main program of the NIC
Choose Software Center > V100R006C00S Version Software > Wireless DBS3900 LTE which is installed PC200 Product Line > Wireless OSS > V100R003C00SP after the main MAINEX > NIC > NIC C200 M2000 program of the NIC NIC V100R006 > NIC mediation ENG is installed. V100R006C00SPC200 LTE mediation,
Main program of the OMStar, including the Transdata data OMStar V500R006C02SP import program, V500R006C02 OMStar C100T_ENG_SO OMStar data analysis program, FT and Mini-OMStar plugin for data import and analysis. eRAN2.1
How to Obtain
SQL Server 2000 the SQL Server Personal Edition required.
Log in to http://support.huawei.com. Choose Software Center > Version Software > Wireless Product Line > Wireless OSS > MAINEX > OMSTAR > OMSTAR V500R006 > OMSTAR V500R006C02.
SQL Server 2000 1. Obtain the software from the IT Personal Edition administrator of the corresponding representative office. 2. Obtain the software from the file mirror server of the corresponding office/sub-regional office/sub-regional division.
SQL SQL patch, which Server en_sql_server_20 is installed after the SP4 00_sp4 SQL Server 2000 is installed.
Download the setup program of the SQL Server 2000 from the following directory: \\lg-fs\Rnd\ Software\2.ITapply\0.Database\ SQL Server\ en_sql_2000a_personal.iso Download the patch file of SQL Server 2000 SP4 from the following directory: \\lg-fs\Rnd\ Software\2.ITapply\0.Database\ SQL Server\patch.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 7 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
1.5 Installation Requirement Requirementss 1.5.1 Installation Environment Specification Hardware Requirement
Software Requirement
Model: common PC CPU: P4 1.8 GHz or higher
OS: Windows XP SP3 or more advanced Windows Server operating system
Memory: 2 GB or higher
Database: SQL Server 2000 Personal Edition SP4
Hard Disk: 80 GB or higher Accessories: Network adapter/17-inch adapter/17-inch LCD display
Browser: Internet Explorer 6.0 or later Others: Office 2003 or Office 2007
1.5.2 Hard Disk Specification Data Software Specification
Required Space
Required Space for Collection and Analysis (30 eNodeB)
Required Space for Collection and Analysis (900 eNodeB)
Single BSC NIC (capable of controlling 88 OMStar base stations and 338 cells), seven-day data, and granularity of traffic statistics data is 60 minutes.
480 MB
Collected data package: package: 170 MB
Collected data package: 5 GB
600 MB
Collected data package: 180 MB
Collected data package: 5.5 GB GB
OMStar installation directory: 2.5 GB
OMStar installation directory: 2.5 GB (same as that in the Required Space for Collection and Analysis (30 eNodeB ) column.)
OMStar project storage: 3 GB
OMStar installation directory: 2.5 GB (same as that in the Required Space for Collection and Analysis (30 eNodeB ) column.) SQLServer
2022-4-21
250 MB MB
Database iin nstallation directory: 1.5 GB
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Database installation directory: 1.5 GB (same as that in the Required Space for Collection and Analysis (30 eNodeB ) column.)
Page 8 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
1.5.3 Descriptions of NIC Ports Port
Source Device
Target Device
Description
31035
NIC server
M2000 server
This port is provided by the M2000 server and used for the NIC to collect data.
6000
NIC server
NE
This port is provided by a specific NE and used for the NIC to collect MML data.
21
NIC server
NE
This port is provided by a GSM/UMTS NE and used for the NIC to collect data in FTP transmission mode.
31038
Web browser
NIC server
This port is used to connect to the NIC server through HTTP.
NIC server
These ports are NIC internal ports.
30700 NIC server 31000 31007 31009 31015 31030 31032 31037 31038 6432 5432
1. The preceding specifications are only for your reference. The actual specifications may vary with networks and data. You must reserve sufficient disk space. 2. After the NIC is installed, the disk where the installation directory is located must have a minimum of 5% free space for saving collected data. Otherwise, the NIC displays error information.
1.5.4 Networking Modes a.
Online De Deployment
The NIC, OMStar, and SQL Server are installed on a PC. The PC is connected to NEs through the network during data collection.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 9 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Required space (400 eNodeB): at least 10 GB free space for an inspection.
b.
Offline Deployment
The NIC is installed on a PC that is connected to NEs through the network. After data is collected, you can manually copy the data to the PC where the OMStar and the SQL Server are installed for automatic import and analysis.
Required space (400 eNodeB):
PC where the NIC is installed: at least 5 GB free space for an inspection. PC where the OMStar and the SQL Server are installed: at least 10 GB GB free free space for an inspection.
1.6 Introduction to the Installation and Operation of the OMStar
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 10 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
NOTE
The existing OMStar does not provide a summarizing tool. Use the OMStar to analyze data and export a .doc report.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 11 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
2
INTERNAL
Installing the SQL Server
2.1 Precautions for Installing the SQL Server 1.The directory for saving the source files of the installation package and the installation directory of the SQL Server 2000 cannot contain any Chinese character. 2.If the SQL Server 2000 has been installed and uninstalled on the PC, check whether the uninstall is complete by performing the following steps: (1) Run regedit. (2) In the registry, check whether "PendingFileRenameOperation" of "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager" is present. If it is present, delete it. 3.During installation, the Collation designator must be set to Chinese_PRC and Sort order must be set to Accent sensitive. 4.If the SQL Server 2000 fails to be installed, handle it by referring to section 8.1.1 "How Do I Handle the SQL Server Installation Failure?" Failure?"
2.2 Installing the SQL Server 2000 Personal Edition To install the SQL Server 2000 Personal Edition, do as follows:
2. Click SQL Server 2000 Components .
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 12 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
3. Click Install Database Server.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 13 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
4. Click Next.
5. Select Local Computer, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 14 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
6. Select Create a new instance of SQL Server, or install Client Tools , and then click Next.
7. Enter the user name and the company name, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 15 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
8. Click Yes.
9. Select Server and Client Tools , and then click Next.
10. Select Default, and then click Next. 2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 16 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
If Default is unavailable, it indicates that a database instance has been installed on the PC. In this case, enter a new instance name, for example, OMSTARSOP, in Instance name.
11. Select Custom, and then click Next. You can set the destination folders of program files and data files as required or use the default destination folders. (The path name cannot contain Chinese characters.)
12. Click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 17 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
13. Select Use the same account for each service. Auto start SQL Server Service and Use the Local System account, and then click Next.
14. Select Mixed Mode (Windows Authentication and SQL Server Authentication) , set the password of user sa, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 18 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
15. Select Chinese_PRC in Collation designator and Accent sensitive in Sort order, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 19 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
16. Select Named Pipes and TCP/IP Sockets with the default values unchanged, and then click Next, as shown in the following figure.
17. Click Next. The setup program starts copying the program files.
18. Click Finish to complete the installation of the SQL Server 2000 Personal Edition.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 20 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
2.3 Installing the SQL Server 2000 SP4 To install the SQL Server 2000 SP4, do as follows:
19. Click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 21 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
20. Click Yes.
21. Click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 22 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
22. Select The SQL Server system administrator login information (SQL Server 13. in section authentication) , enter the password of user sa (this password has been set in 13. in 2.1 "Precautions for Installing the SQL Server "; "; the user name and password are sa by default), and then click Next.
23. Select Upgrade Microsoft Search and apply SQL Server 2000 SP4 (required) , and then click Continue .
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 23 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
24. Click OK .
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 24 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
25. Click Next.
26. Back up the databases, and then click OK . 2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 25 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
27. Click Finish to complete the installation of the SQL Server 2000 SP4.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 26 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
3
INTERNAL
Installing the NIC
3.1 Precautions for Installing the NIC 1.The NIC can be installed successfully only if the source files of the NIC installation package are saved in the directory that does not contain any Chinese character and illegal character. 2.The main program language edition for the NIC installation must be consistent with the NE language edition. 3.If the NIC fails to be installed, handle it by referring to section 8.2.1 "How Do I Handle the NIC Startup Failure?" Failure?"
3.2 Installing the NIC Tool To obtain the installation package of the NIC and install the NIC, do as follows:
28. Double click install package, select temp dir to release the package.
29. Select the setup language of the NIC, and then click OK .
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 27 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
30. Click Next.
31. Select I accept these terms.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 28 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
32. Click Next. You can set the target directory as required or use the default directory. The default directory is recommended.
33. Click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 29 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
34. Click Next.
35. Click Finish to complete the NIC installation.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 30 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
4
INTERNAL
Installing the OMStar
4.1 Installing the OMStar Tool To install the OMStar, do as follows:
36. Select the setup language, and then click OK .
37. Click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 31 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
38. Click Accept.
39. Enter User Name and Company Name, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 32 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
40. Click Next. You can set the installation directory as required or use the default directory.
41. Click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 33 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
42. Click Install.
43. Click Finish to complete the installation of the OMStar.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 34 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
4.2 Applying for and a nd Installing a License
The OMStar and the Transdata share the same license file with the same ESN. You need to activate the license file for the OMStar and the Transdata respectively.
If the PC uses multiple network adapters, the ESNs may change when the system cannot read the ESNs of the hard disks. In this case, the number of ESNs is equal to that of network adapters. You are advised to record and reserve the license files corresponding to all the ESNs, and re-activate the license files based on the ESNs each time.
44. After the OMStar is installed, start it.
45. In the displayed dialog box, record the ESN.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 35 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
46. Log in to the W3 license management center by pressing Ctrl and clicking http://w3.huawei.com/dominoapp/isc/license/libv m/dominoapp/isc/license/libvcg.nsf/fmDatabas cg.nsf/fmDatabase?ReadForm e?ReadForm.. http://w3.huawei.co select Non-Commercial Lic License ense.. 47. Click Platform License Application, and then select Non-Commercial
48. Enter the relevant information in the application information page, and then click Get License Application Template.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 36 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
namely, MAINEX OMStar Select the application template of the OMStar V500R006, namely, MAINEX ID).xls.. V500R006 license application (yyyy-mm-dd+full name+employee ID).xls
the MAINEX OMStar V500R006 V500R006 license application ( 49. Save the MAINEX yyyy-mm-dd+full yyyy-mm-dd+full name+employee name+employee ).xls file. file. The information marked red should be filled by the applicant as follows: ID ).xls
50. Open the file, enter the required information such as Applicant, YYYY-MM-DD (end date), ESN, OMStar Network Performance Analysis–Add, and OMStar Enhanced Development Platform–Add, and then save the file.
51. Click Upload on the application information page, and then select the application form that you set in 50.. 50..
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 37 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
52. Click Submit on the application information page. In the displayed confirmation dialog box, click OK to to submit the application information.
53. After the license file is complete, the license center automatically sends a notification mail to the applicant.
54. Log in to the W3 license management center by pressing Ctrl and clicking http://w3.huawei.com/dominoapp/isc/license/libv m/dominoapp/isc/license/libvcg.nsf/fmDatabas cg.nsf/fmDatabase?ReadForm e?ReadForm,, choose My http://w3.huawei.co Applications > Non-Commercial License, and then select the license that you apply for.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 38 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
55. On the license approval page, click View Detail Approval Log, and then download the license file (.dat) in Attachment to the local PC.
56. Restart the OMStar V500R006, and then select Update License. The Open dialog box is displayed.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 39 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
57. Select the required license file, and then click Open. A message is displayed.
Click OK . The message "Update license successfully!" is displayed.
58.
2022-4-21
Start the Transdata and activate the license file that is shared by the Transdata and the OMStar. The method for updating the license file of the Transdata is the same as the method for updating the license file of the OMStar.
The Mini-OMStar is a plugin that is automatically integrated with the Transdata and the OMStar. The Mini-OMStar can perform analysis only after you activate the license file for the OMStar and the Transdata respectively.
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 40 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
5
INTERNAL
Using the NIC
5.1 Installing the Mediation Matching the NE Version 5.1.1 Precautions for Installing the Mediation Layer 1. The main program language edition and mediation layer language edition for the NIC installation must be consistent with the NE language edition. 2. You must install the mediation layer matching a specific NE version by choosing NIC Tools Suite > Mediation layer manager. Double-clicking the setup program to install the mediation layer is not allowed.
5.1.2 Procedure for Installing the Mediation Layer 59. Choose NIC Tools Suite > Mediation layer manager. Be sure to install the mediation of each NE version through the Mediation layer manager. manager. Install the mediation by double-clicking the mediation setup program is not allowed.
60. Click Install From file.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 41 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
61. Select the mediation package to be installed. The language of the mediation (the name contains "CHS" or "ENG") must match the language of the main program of the NIC.)
62. After the mediation is installed successfully, click Exit.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 42 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
5.2 Setting the IP Address of the FTP Server 63. Choose NIC Tools Suite > FTP Server Configuration.
64. Select the proper IP address from the IP address drop-down list box. That is, select the IP address of the PC where the NIC is installed (Ensure that the IP address address can be connected to network where the NE is located.)
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 43 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
65. Click Ok .
66. Display Server Proxy Configuration Configuration. Set Mode Selection to Proxy Mode.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 44 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
67. Click OK to to complete the server proxy configuration.
If the NIC has been started, restart the NIC (In the notification area, right-click the NIC icon, and then choose Exit NIC from the shortcut menu. Then, restart the NIC.instead of restarting the Internet Explorer) to make the configuration take effect after the FTP Server configuration is complete.
5.3 Using the NIC to Collect Data
2022-4-21
a.
NE Managem Management: ent: used used to to create create or or del delete ete an an NE. For For details details about about how how to create create an NE, see section 5.3.1 "Creating an NE." NE."
b.
Scenario Management: Management: used to customize a collection scenario that the SOP collection is unavailable (optional (optional). ).
c.
Task Manag Management : used create create a colle collection task taskrange (for (for select selecting ing the the collecti collection on scenario scenario,, the NEs fromement: which data to is collected, andction the time of collection).
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 45 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
5.3.1 Creating an NE This section describes how to create a BSC manually on the NIC. For details about how to import NEs in batches, batches, see section section 8.2.5 "How Do I Add NEs More Efficiently by Using the Batch Import Function?"" Function?
68. Choose NIC Tools Suite > Network Information Collection.
69. Choose NE Management > NE Information Maintenance.
70. Select an NE from the drop-down list.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 46 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
71. Configure the NE connection information.
Note：User name and Password : which to log in the eNodeB
72. Click Apply to create an NE.
5.3.2 Customizing SOP Collection Scenario
1. This step is optional. 2. You do not need to customize the SOP collection scenario for LTE 2.1, because LTE 2.1 provides a default default SOP collection scenario scenario (OMSTAR (OMSTAR Check).
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 47 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
5.3.3 Creating a Collection Task 73. Click the Task Management tab. Select Unfinished Tasks in Navigation Tree, and then select Based on Scenario from the Create Task drop-down drop-down list box in Task List.
74. Set Task Name, and then select a product from the Product Type drop-down list box and a scenario from the Scenario(Group) drop-down list box. namely, COMMON. Scenario(Group) : Select the SOP collection scenario, namely, Task Execution Type: You are advised to select Instant . (If you select Scheduled , you need to set Task Execution Time.)
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 48 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
75. Click Next, set the Data Collection Time Range. Data Collection Time Range: You are advised to collect data of three to seven days (if the time range is too large, the collection and analysis efficiency is affected).
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 49 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
76. Select an eNodeB under the eNodeB node in Optional NEs, and then click > to move the selected eNodeB to Selected NEs. Then, click Next.
77. Click each NEs in the left list, ensure that the parameter settings of each NE are correct, correct, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 50 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
78. Set the additional information such as Name and Email, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 51 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
79. After ensuring that the collected information is correct, click Finish to start the collection task.
5.3.4 Viewing the Collection Result
Do not disable the FTP Server of the tool during data collection; otherwise, the collection may fail.
Check whether configuration collection fails. The data analysis of the NE where configuration collection fails may also fail.
80. During collection, view the progress of the whole collection task and the progress and running status of each NE.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 52 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
81. Select tasks in Finished Tasks.
82. Select Result Information. Click Task Result and Download.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 53 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
6
INTERNAL
Using the OMStar
This chapter describes how to implement the automatic data import and analysis and generate a summary report on the Mini-OMStar in one-key mode. The descriptions about the manual data import and analysis and other functions of the OMStar are not included in this chapter chapter..
6.1 Introduction to the Mini-OMS Mini-OMStar tar Mini-OMStar is a plugin of the OMStar, which integrates with the function of data collection supported by the NIC and the function of data import and analysis supported by the OMStar. OMStar. The Mini-OMStar helps in network evaluation and inspection and reduces the time for manual operation. This document describes only the overview information about the Mini-OMStar. For details, click Help in the menu bar to see the Help document.
The Mini-OMStar creates a database on disk D to perform a one-key analysis task. If no disk D is available, handle it by referring to section 8.3.6 "Why Does the Mini-OMStar Fail to Create an Automatic Analysis Task?"
The language of the Mini-OMStar is English only.
6.2 Starting the Mini-OMS Mini-OMStar tar 83. Choose Microsoft SQL Server > Service Manager .
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 54 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
84. Check that the default SQL Server instance is started properly.
85. Start the Mini-OMStar.
86. Enter the information for login. SQL Server: indicates the database server used by the OMStar. You can type the information by referring referring to the following description: description:
2022-4-21
If the server name is typed in Server in Step 2, you just need to type period (.).
If Server name name\\instance name is typed in Server in Step 2, you just need to type ".\ instance name." name."
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 55 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
6.3 Creating a One-key Analysis Task 87. Click
to create a one-key analysis task.
88. Set the NIC collection information, bind an NIC collection task, and then click Next.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 56 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Data Source Path: indicates the root directory for saving data collected by the NIC. After the NIC is installed, this root root directory can be identified automatically. automatically. If If the NIC is not installed installed on the PC, you need to manually specify it. For details, see Step 3 in section 5.3.4 "Viewing the Collection Result." Result."
You ou must set this parameter to the actual name of Task Name: Indicates the name of a task.. Y an NIC task.The value of this parameter must be in English,number and ‘_’,cann’t start with number,and number ,and the long must fewer than 27. Task Type: indicates the task execution type. Currently, Task Type for the NIC can only be set to Immediately.
Immediately: indicates that the task is executed immediately. This type of tasks corresponds to immediate collection tasks or scheduled collection tasks on the NIC.
89. Set common parameters for analysis on the OMStar, and then click Next.
90. Select the NE version, set check items and related thresholds, and then click Finish.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 57 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
91. Right-click a task on the main interface, and then choose Run from the shortcut menu to start the task. Alternatively, click
to start the task.
92. View the task running status and execution process. Task state : indicates the state of a task. A task can be in one of the following states:
2022-4-21
Ready: indicates that the task is ready. You can run, edit, or delete the task.
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 58 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
You can stop this task but cannot edit or Running: indicates that the task is running. You delete it. Note that you can start multiple tasks at the same time but only one task can be in the running state at a time.
Stopping : indicates that the task is being stopped. You You cannot run, edit, or delete the task.
If the online deployment is used (the NIC and the OMStar are installed on a PC): After the task on the NIC is started, you can start a one-key analysis task even if the data collection is not complete. The Mini-OMStar periodically detects the data integrity and implements the automatic analysis after the data collection is complete, as shown in the following figure. If the offline deployment is used (the NIC and the OMStar are installed on different PCs): After the collection task is executed completely completely,, the data corresponding to the task ID can be copied to the PC where the OMStar is installed. For details, see Step 3 in section 5.3.4 "Viewing the Collection Result." Result."
The Mini-OMStar task is executed. starts the Transdata automatically, but you need to close the Transdata before the
You can close the Transdata that is started by the Mini-OMStar only if the task is executed completely.
93. View NE reports generated by the one-key analysis task. To view a report, do as follows: Select a task in the task list, and then choose Report > View Report or click the hyperlink in the Report column.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 59 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Task name: indicates the name of the executed task that corresponds to reports in the report list. Report path: indicates the path for saving reports in the report list. Open: enables you to navigate to the path for saving reports. Open report file: enables you to open a report file. Open report path: enables you to navigate to the path for saving reports.
2022-4-21
Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
Page 60 of 77
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
The report is named in the following format: Project name + Generation time stamp of the report.
2022-4-21
Huawei Proprietary and Confidential
Page 61 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
7
INTERNAL
Help Information
Contact person: Wang Sen Staff ID: 148669 Email: wangsency@hua
[email protected] wei.com Your valuable advice is always welcome. In case of any problem related to the tool usage, please collect relevant log information and send it to R&D engineers for handling. Direct Directories ories for saving logs of the NIC:
Main logs for troubleshooting: Installation directory directory of the NIC \etc\NICServer\omstarnicscript\omstar_Log \etc\NICServer\omstarnicscript\omstar_Log Auxiliary logs for troubleshooting: Installation directory directory of the NIC \var\logs \var\logs Installation directory directory of the NIC \data\pg_log \data\pg_log Installation directory directory of the NIC \bin\pgbouncer.log \bin\pgbouncer.log Installation directory directory of the NIC \bin\pgbouncer.pid \bin\pgbouncer.pid Installation directory directory of the NIC \bin\postgres_install.log \bin\postgres_install.log Directories for saving logs of the OMStar V500R006:
Installation directory directory \OMStar V500R006C02\Transdata\SysLog V500R006C02\Transdata\SysLog Installation directory directory \OMStar V500R006C02\WCDMA\SysLog Installation directory directory \OMStar \OMStar V500R006C02\WCDMA\Runtime V500R006C02\WCDMA\Runtime Installation directory directory \OMStar V500R006C02\WCDMA\UNP\Log
Compress the log data if the data amount is large.
2022-4-21
Huawei Proprietary and Confidential
Page 62 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
8
FAQs
8.1 FAQs Related to the SQL Server 8.1.1 How Do I Handle the SQL Server Installation Installation Failure? installed SQL Server is The cause of most installation failures is description that the previously uninstalled incompletely incompletely. . The following describes some common installation completely. errors. The handling methods can also be used to uninstall the SQL Server 2000 completely. a.
Files ar are pe pending.
This error usually occurs when the SQL Server is uninstalled and then reinstalled. Solution:
2022-4-21
Huawei Proprietary and Confidential
Page 63 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Delete the key value "PendingFileRenameOperation" "PendingFileRenameOperation" in HKEY_LOCAL_MACHINE\ SYSTEM\CurrentControlSet\Control\Session Manager of the registry. b.
The installation program program fails to configure the server.
Solution: Cause 1: The previously installed SQL Server 2000 is uninstalled incompletely. −
Delete the Microsoft SQL Server folder in C:\Program Files.
−
Find "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server" in the registry and delete it.
Cause 2: The name of the PC running Windows contains lower-case letters. The SQL Server 2000 fails to be installed when the name of the PC running Windows Windows contains some or only lower-ca lower-case se letters, with the message of general network error in the sqlstp.log file. To solve this problem, change the lower-case letters to upper-case letters. For example, to change the PC name from jys0800964 to JYS0800964, do as follows: Open the registry (by running the regedit command in the Run window), find "HKEY_LOCAL_MACHINE\System\CurrenControlSet\Control\Com "HKEY_LOCAL_MACHINE\System\Cur renControlSet\Control\ComputerName\ puterName\ ComputerName",, and then change the primary key value of 'ComputerName' from ComputerName" jys0800964 to JYS0800964. Then, log out the user or restart the system to make the modification take effect.
c.
The syste system m display displayss th thee messag messagee "comman "command d line line option syntax syntax error. error.""
The cause of this error is that the name of the directory for saving the source files of the SQL Server installation package contains this to case, the SQL Server can be installed successfully after you click Chinese OK , butcharacters. the OMStarInfails connect to the database. Solution: Ensure that the name of the directory for saving source files of the SQL Server does not contain any Chinese character. d.
The GU GUII iiss ssusp uspend ended ed during during ins instal tallat lation ion..
Solution: The SQL Server 2000 Personal Edition should be installed for Windows XP. Check whether the SQL Server Standard Edition or Enterprise Edition is installed on Windows XP (the two editions can be installed only on Windows Server 2000 or Windows Windows Server 2003). e.
2022-4-21
The SQL SQL S Serve erverr fails fails tto o be start started ed after after tthe he domain domain password password is change changed. d.
Huawei Proprietary and Confidential
Page 64 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Choose Control Panel > Management Tools > Services. In the displayed window, window, rightclick MSSQLSERVER and and choose Properties from the shortcut menu. Then, click the Login tab and change the password to the password of the current domain user.
8.1.2 How Do I Handle the Database Connection Failure? 1. The problem of invalid connection or common network error occurs. Either of the following log is recorded in the WCDMA\UNP\Log\...\ofc.log file: [Microsoft][ODBC SQL Server Driver][DBNETLIB]invalid connection or [Microsoft] [Microsoft][ODBC [ODBC SQL Server Driver][DBNETLIB]common network error. Solutions: Solution 1: Open the configuration manager manager,, and then d double-click ouble-click TCP/IP to view the TCP/IP configuration.
2022-4-21
Huawei Proprietary and Confidential
Page 65 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Check that the TCP dynamic port is left blank.
Solution 2: Restart the service through the service manager. Note that you need to perform this operation several times to solve this problem. 2. Connecting to the database fails. Solutions:
Solution 1: Check whether the server is started in the SQL Server Service Manager window. If the server is not started, start it.
2022-4-21
Huawei Proprietary and Confidential
Page 66 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Solution 2: Verify Verify that the typed server name is correct. Note that the only the slash "\" can be contained in the server name. The following figure shows the incorrect server name:
3. The user name or password for logging in to the database is incorrect. Solutions:
Solution 1: Verify Verify that the user name or password for logging in to the database is correct. Solution 2: If you forget the user name or password, perform the following steps to modify the user name or password:
94. Choose Microsoft SQL Server > Enterprise Manager.
95. In the SQL Server Enterprise Manager window, choose Microsoft SQL Servers > SQL Server Group > (local) (Windows NT) > Security > Logins from the left navigation tree to view the names of users that have logged in to the database. To modify the password of a user, right-click a user in the right pane and choose Properties from the shortcut menu. To create a new user, right-click a user in the right pane and choose New Login from the shortcut menu.
2022-4-21
Huawei Proprietary and Confidential
Page 67 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
8.1.3 Can the MSDE 2000 Be Used? a.
Th Thee MSDE MSDE 20 2000 00 is equiv equival alen entt to a li lite te edit editio ion n of SQL SQL Serv Server er 20 2000 00 with with th thee limite limited d specification (the performance decreases decreases abruptly when the size of a single table exceeds 2 GB). GB). The MSDE 2000 2000 is not re recom commen mended ded esp especi eciall ally y when when the perfor performan mance ce measurement data collected from a single BSC exceeds 150 MB.
b.
If the conditions for installing installing the SQL Sever 2000 2000 are not met but users can can take the low efficienc effic iency y risks cause caused d by the MSDE, MSDE, the GENEX MSDE program must be insta installed lled.. The The GE GENE NEX X MSD MSDE pr prog ogrram can be dow downl nloa oade ded d from th thee fol ollo lowi win ng URL: RL: http://support.huawei.com/s http://support.huawei.com/support/pages/editionctr upport/pages/editionctrl/catalog/ShowVer l/catalog/ShowVersionDetail.do? sionDetail.do? actionFlag=getDetail&node=00000142343 actionFlag=getDe tail&node=000001423430&colID=ROOTENWE 0&colID=ROOTENWEB|CO0000000174 B|CO0000000174..
c.
The MSDEs MSDEs of other vendors vendors ma may y not be be applicabl applicablee to normal normal analysis analysis of the OMSta OMStar. r.
8.1.4 Can the SQL Server 2005 Be Used? The OMStar can only support the SQL Server 2005 Enterprise, which is only compatible with the Windows Server Server 2003 and later versions. Other versions of the SQL Server 2005 including the SQL Server 2005 Standard and SQL Server 2005 Express cannot be supported by the OMStar. OMStar. The OMStar can support the SQL Sever 2000 and the SQL Server 2005 Enterprise installed together.
8.2 FAQs Related to the NIC 8.2.1 How Do I Handle the NIC Startup Failure? d.
Check Check that the the FTP Se Server rver is is disabled disabled and and the default default FTP port port is not used before before start starting ing the NIC.
2022-4-21
Huawei Proprietary and Confidential
Page 68 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
The FTP Server ports conflict between the LMT and the NIC. Therefore, you need to disable the FTP Server before starting the NIC. e.
At present, present, the the ports ports conflict conflict between between the M2000 client client and the the NIC. Therefor Therefore, e, disable disable the M2000 client before starting the NIC.
f.
For other causes, causes, send the log infor informatio mation n to R&D engineer engineerss for for trouble troubleshoot shooting. ing.
8.2.2 How Do I Handle the Failure to Add NEs to the NIC? g.
Check Check whether whether the the user name and passwor password d are correct, correct, that that is, check check whether whether the the login login by using the LMT succeeds. succeeds.
h.
Chec Check k w whe heth ther er the the IP addr addres esss in in FTP Server Configuration is consistent with the IP address of the PC. If the IP addresses are inconsistent, modify them and restart the NIC to make the modification take effect. (Caution: Restart the NIC program without restarting the Internet Explorer.)
i.
Check Mediation layer manager to ensure that mediation matching the version of the NE whose data needs needs to be collected collected has been installed.
j.
For other causes, causes, send the log information information to development engineers engineers for troubleshooting. troubleshooting.
8.2.3 The System Displays the Message "Adaptation layer does not match the C version of the NE." When the User Adds an NE k.
This error error is a type type of NE NE adding adding failure failures. s. Che Check ck whethe whetherr the media mediation tion matchi matching ng the NE version is installed.
l.
If the medi mediati ation on mat matchi ching ng the N NE E versio version n is install installed, ed, the the possibl possiblee cause cause is that that the NIC NIC of Chinese version has been manually installed with the mediation of English version.
8.2.4 Data Collection Failure Scenarios (Configuration Data, Traffic Statistics Data, and MML Data) m.
If the NIC fa fails ils to be connec connected ted to NEs NEs,, check check whether whether the the FTP Server Server of the NIC NIC is disabled. Do not disable the FTP Server during startup or running of the NIC.
n.
Chec Check k w whe heth ther erPC. the the IP addr addres esss in in FTP Server Configuration is consistent with the IP address of the If the IP addresses are inconsistent, modify them and restart the NIC to make the modification take effect. (Caution: Restart the NIC program without restarting the Internet Explorer.)
o.
Check Check whet whether her the user user has has the the opera operatio tion n right right.. It is recommended to collect data as user admin; otherwise, the collection may fail due to lack of rights for certain collection items.
2022-4-21
−
Check whether the user is authorized to operate MML commands. If the user is not authorized to operate MML commands, collecting configuration data and MML data may fail.
−
Check whether the user is authorized to back up configuration files. If the user is not authorized to back up configuration files, collecting configuration files may fail.
−
Check whether the user is authorized to run the BIN command. If the user is not authorized to run the BIN command, collecting traffic statistics data may fail.
Huawei Proprietary and Confidential
Page 69 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
8.2.5 How Do I Add NEs More Efficiently by Using the Batch Import Function? 96. Choose NE Management > NE Information Maintenance, and then click Batch Manage.
97. In the Batch Manage window, click Download Template to save the template to the local PC.
98. Load the macro. Then, select the NE type, such as LTE.
2022-4-21
Huawei Proprietary and Confidential
Page 70 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Specify y the information 99. After you select the NE type, the template is automatically displayed. Specif about the NEs to be imported in the template.
100. After you specify the NE information, go to the contents page of the template file and click Export NE To XML File. Then, an NEList folder is generated in the folder where the template is located. The NEList folder contains an .xml file.
101. In the Batch Manage window, click Browse, select the .xml file, and then click Import.
102. After the .xml file is imported, click OK .
2022-4-21
Huawei Proprietary and Confidential
Page 71 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
8.3 FAQs Related to the OMStar and the Transdata 8.3.1 Is the OMStar Compatible with Office 2007? The OMStar V500R006C01T and later versions can support Office 2007.
8.3.2 Does the OMStar Support Windows 7? Currently,, the OMStar V500R006C02does not support Windows 7. Currently
8.3.3 How Do I Handle the Failure to Import the OMStar License? 103. Ensure that the ESN of the license is correct.
2022-4-21
Huawei Proprietary and Confidential
Page 72 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
104. If the ESN is switched over when multiple network interface cards are available, the Invalid license file: Incorrect License ID(***) message is displayed when you update the license of the relevant ESN in turn. For the handling method, see FAQ 8.3.4 "How Do I Handle the Case When OMStar License Prompts "Invalid license file: Incorrect License ID"?" ID"? "
8.3.4 How"Invalid Do I Handle the Case When OMStar License Prompts license file: Incorrect License ID"? 105. Delete the license folder in the following two directories: Installation directory\OMStar V500R006C02\WCDMA Installation directory\OMStar V500R006C02\Transdata V500R006C02\Transdata
106. Copy the following compressed file to the local PC. Decompress the file and click the batch processing file in the file.
2022-4-21
Huawei Proprietary and Confidential
Page 73 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
107. Restart the OMStar. Select the relevant license file based on the displayed d isplayed ESN. Then, update the file.
8.3.5 Does the OMStar Support the Server/Client Mode? The OMStar supports the server/client mode. Y You ou can install the database and Transdata on the same PC to import data. Install the OMStar analysis tool on other PCs. Connect the OMStar analysis tool to the database and analyze the data. Note that you must specify the IP address of the PC where the database is installed before you connect the analysis tool to the database.
If the database uses the non-default instance name, specify the information as shown in the following figure.
8.3.6 How to Handle the Failure to Start the Mini-OMStar Because the vcredist.exe Is Not Installed? Symptom
When you run the Mini-OMStar, Mini-OMStar, the following message is displayed because the vcredist.exe is not installed.
2022-4-21
Huawei Proprietary and Confidential
Page 74 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Solution
After the vcredist.exe is installed, restart the Mini-OMStar. Mini-OMStar. The directory for saving the vcredist.exe is as follows: \OMStar V500R006_ENG \OMStar V500R006\Mini_OMStar\vcredist_x86.exe.
8.3.7 Why Does the Mini-OMStar Fail to Create an Automatic Analysis Task? 1.
Chec Check k whe wheth ther er the the dis disk k D is av avai aila labl blee on on th the PC PC. By default, the automatic anddisk analysis tasks created thePC, Mini-OMStar in one mode are saved in the diskimport D. if the D is unavailable onby the the data cannot be key imported automatically. Solution:
108. Open the config.ini file in the installation directory\OMStar directory\OMStar V500R006\Mini_OMStar\ config.ini directory.
109. Find the DBPATH field and change D behind the equal mark ( =) to a disk label available on a local PC. At least 2 GB free space is required in the available disk.
2.
Chec Check k whet whethe herr tthe he en ente tered red na name me of th thee NIC NIC co colle llecti ction on ta task sk co comp mpli lies es wit with h naming convention. There are restrictions on the name of the project database created by the OMStar when running automatic import and analysis tasks. Therefore, the NIC collection task name is also restricted. For details, see the Step 2 in section 5.3.3 "Creating a Collection Task ..""
2022-4-21
Huawei Proprietary and Confidential
Page 75 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
Task Name: The name of the collection task for network inspection or SOP can contain only letters (a to z and A to Z), numbers (0 to 9), and underline (_),the name cannot contain more than 27 characters, cann’t start with number.
Solution:
Name the NIC collection collection task with the recommended recommended characters. characters. If the NIC collection task with invalid name is executed completely completely,, you can perform the following operation to correct the name and to avoid repeated collection.
Navigate to the path for saving the collected collected data pack packet et and correct correct the task name. For details, see section 5.3.4 "Viewing Viewing the Collection Result." Result."
3.
Chec Check k whet whethe herr the the SQL SQL Se Serv rver er is pr prop oper erly ly in inst stal alle led. d.
If the MSDE 2000 is installed, install the GENEX MSDE program. For details, see FAQ
8.1.3 Can the MSDE 2000 Be Used? If the SQL Server 2000 is installed, set Collation designator to Chinese_PRC. For details, see section 2.1 "Precautions for Installing the SQL Server ..""
To check whether the SQL Server 2000 is properly installed, do as follows:
110. Choose Microsoft SQL Server > Enterprise Manager.
111. In the SQL Server Properties (Configure) (Configure) – (local) dialog box, check whether Collation designator is set to Chinese_PRC_CI_AI.
2022-4-21
Huawei Proprietary and Confidential
Page 76 of 77
Copyright © Huawei Technologies Co., Ltd.
Operation Guide to the OMStar V500R006C02 for LTE Maintenance SOP
INTERNAL
8.3.8 Why Does the Mini-OMStar Display the Message "Waiting for the data source get ready…"? After an immediate task is created, you run the task. The Mini-OMStar displays the message "Waiting for the data source get ready…" for a long time, but the NIC data collection task is executed completely. completely. If this happens, check whether the task name created by the MiniOMStar is consistent with the NIC collection task name. If they are inconsistent, you need to stop the current task, correct the task name, and then run the task again.
8.3.9 How to Handle the Problem That the Task is in the Stopping State for a Long Time After the Mini-OMStar Stops the Task? The Mini-OMStar supports periodic stopping of tasks. After After you stop a task that is running on the Mini-OMStar, the task is waiting for being stopped until it runs to a certain stage. You You need to wait with patience.
8.3.10 How to Back Up Tasks Created by the Mini-OMStar After the OMStar Program Is Uninstalled? The automatic tasks are saved in the project folder in the root directory of the OMStar program. When When the OMStar is uninstalled, the project folder is also deleted. Therefore, you need to back up the project folder before uninstalling the OMStar OMStar.. After the OMStar of a new n ew version is installed, you need to copy the project folder to the directory of the OMStar program.
2022-4-21
Huawei Proprietary and Confidential
Page 77 of 77
