ANT ADU451816v02 1885 Datasheet

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M Model: ADU451816v02 Electrical Properties 2 x (1710 - 2690) Frequency range (MHz) 1710 - 1990

1920 - 2200

Polarization

2200 - 2490

2490 - 2690

+45° , -45° 0 - 12 , continuously adjustable, each band separately

Electrical downtilt (°) 17.4

17.9

18.2

18.4

17.3 ±0.3

17.7 ±0.4

18.0 ±0.3

18.2 ±0.4

> 18

> 18

> 18

> 18

Horizontal 3dB beam width (°)

66 ±2.7

65 ±2.7

63 ±2.8

61 ±2.6

Vertical 3dB beam width (°)

6.9 ±0.3

6.3 ±0.3

5.5 ±0.3

5.0 ±0.3

at mid Tilt Gain (dBi) over all Tilts Side lobe suppression for first side lobe above main beam (dB)

VSWR

< 1.5

Cross polar isolation (dB)

≥ 30 ≥ 30 (1710 - 2690 // 1710 - 2690 MHz)

Interband isolation (dB) Front to back ratio, ±30° (dB) Cross polar ratio (dB)

0°

> 27

> 27

> 27

> 27

> 20

> 20

> 20

> 20

Max. power per input (W)

250 (at 50℃ ambient temperature)

Intermodulation IM3 (dBc)

≤ -153 (2 x 43 dBm carrier)

Impedance (Ω)

50

Grounding

DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA). 2. Electrical datasheet in XML format is available.

Mechanical Properties Antenna dimensions (H x W x D) (mm)

1365 x 269 x 86

Packing dimensions (H x W x D) (mm)

1680 x 340 x 155

Antenna weight (kg)

11.8

Clamps weight (kg)

2.9 (2 units)

Antenna packing weight (kg)

18.8 (included clamps)

Mast diameter supported (mm)

50 - 115

Radome material

Fiberglass

Radome colour

Light grey

Operational temperature (℃)

-55 .. +65 Frontal: Lateral: Rear side:

Wind load (N)

540 (at 150 km/h) 75 (at 150 km/h) 510 (at 150 km/h)

Max. operational wind speed (km/h)

200

Survival wind speed (km/h)

250

Connector

4 x 7/16 DIN Female

Connector position

Bottom

Accessories Item

Model

Description

Weight

Units per antenna

Downtilt kit

ASMDT0B01

Mechanical downtilt: 0 - 16 °

1.3 kg

1 (Separate packing)

1

DXX-1710-2690/1710-2690-65/65-18i/18i-M/M Model: ADU451816v02 This antenna can upgrade to RET antenna when with a remote electrical tilt module. Model

Description

Weight

Units per antenna

AIMM20D11

Remote electrical tilt module, a couple of AISG connectors

0.6 kg

1 (Separate packing)

106

60

1274 1365

35.5

Unit: mm

1710 - 2690 Left

1710 - 2690 Right

X

X

+45°

-45°

+45°

-45°

7/16 (F)

7/16 (F)

7/16 (F)

7/16 (F)

Pattern sample for reference

1710 - 2690 MHz (Left)

1710 - 2690 MHz (Right)

NOTE 1. Facilities, such as towers and poles, must bear the weight and wind load of antennas. 2. HUAWEI ‘s standard brackets and accessories must be used for any installation. 3. The antenna working environment must meet the requirements specified in the datasheet. 4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements described in the antenna installation guide. Huawei Technologies Co., Ltd.

Bantian, Longgang District, Shenzhen 518129, P.R.China

Any previous datasheet issues become invalid.

2

www.huawei.com/antenna Issue: 2015-12-30