Alldata 10.50 install 1. Close your anti-virus software, Open the folder\ ALLDATA INSTALL \ AFW_10500811 Choose the Setup.exe to install
Installing
Next
\
Next
Input name phone and address (any as you want)
Waiting
The Alldata don’t need install the key,
When it appears the following interface, you only need click the button“ “NO” ”to continue .
Finish
2. Open the folder ALLDATA Copy the crack file
\
INSTALL
\
alldata10.50_crack,
Paste the file to C:/Alldataw( the rounter where the alldata was installed, that’s why you need remember where you install)
If you don’t remember where you install the alldata, you can do like the following: Right click the icon of alldata on desktop, then select “Porperty” →“Find Objet”,Finally you also can find the disc where you install the alldata.
3. open folder ALLDATA \ INSTALL \ FLEXnet Software REMOVER
4. Run the Alldata on desktop.
Now let us set data directory one by one
go to menu Data → Devices
click “Connect” button
Then Connect to the alldata Disc Path , because my external hard disc with alldata shows Disc i: on my computer. So I select i:\ , Maybe the external HDD with alldata shows Disc j: on your computer, then you select j:\ . And
DM1
Data
path
ALLDATA\DM1 , Click OK
is
\ALLDATA\DM1,
SO
input
Next , choose Disc i, Data path: ALLDATA\DM2 Click OK . Do as this step until IMP37 (because alldata 10.50 has DM1 TO DM10, IMP1 TO IMP37 ) (details Check the vedio)
5. After you connect all data ,you can enjoy it. If you have problem about installing,please email us:
[email protected] ☺☺☺☺