All Overshots
Short Description
Over shots...
Description
Series 150
Baker Oil Tools - Celle Bowen Series 150 Overshots held in Stock - Celle
As at
4/14/1998
Maximum Catch (Spiral) Maximum Catch (Basket) Overshot Od Standard Box Conn Type Assy Nr Replacement Parts
2 1 3/4 2 5/16 1 13/16 WFJ S.H. B-8919
2 1/8 1 3/4 2 5/8 2 3/8 WFJ S.H. C-10199
2 1/ 2 2 3 3/8 2 3/8 Reg S.H. C-4523
2 7/ 8 2 19/32 3 5/8 2 3/8 Reg X.S.H 9270
3 1/16 2 11/16 3 3/4 2 3/8 IF S.H. 37585
Top Sub Bowl Packer Packer Seat Ring Spiral Grapple Spiral Grapple Control Standard Guide
A-8920 B-8921 L-9407 A-8922 M-9403 L-9405 L-9404
A-10200 B-10201 B-10202 A-10203 B-10204 A-10205 A-10206
A-5083 B-5088 B-5089 A-5090 B-5091 A-5092 A-5093
9276 9271 8550 9274 9272 9273 9275
37586 37587 37588 37589 37590 37591 37592
Basket Grapple Basket Grapple Control Mill Contol Packer
M-9403 L-9405 9407-R
B-10204 A-10205 B-10202-R
B-5091 A-5092 B-5089-R
9272 9273 8550-R
31 21 14 44
51 47 26 62
99 89 56 167
3 1/8 3 1/8 2 5/8 2 5/8 3 7/8 4 2 3/8 Reg 2 7/8 Reg S.H. S.H. C-1835 C-5104 A-1842 B-1836 B-1839 A-1840 B-1837 A-1838 A-1841
A-5105 B-5106 B-5107 A-5108 B-5109 A-5110 A-5111
37590 B-1837 B-5109 37591 A-1838 B-5110 37588-R B-1839-R B-5107-R
3 21/32 3 1/8 4 9/16 2 7/8 IF S.H. C-5151 A-5152 B-5153 L-6665 A-4338 B-4339 B-4340 A-4341
4 3/4 4 1/4 5 5/8 3 1/2 IF S.H. C-5168 A-5169 B-5170 B-2199 A-2200 B-2201 B-2202 B-2203
B-4339 B-2201 B-4340 B-2202 L-6665-R B-2199-R
4 3/4 4 1/4 5 3/4 3 1/2 IF F.S. 8975
5 4 1/2 5 7/8 3 1/2 IF S.H. C-5171
5 4 3/8 6 1/8 3 1/2 IF S.F.S. 7787
6 1/4 5 5/8 7 3/8 4 1/2 FH S.H. 9692
6 1/4 5 5/8 7 3/8 4 1/2 FH S.H. N-9692
6 1/2 5 3/4 8 1/8 4 1/2 IF F.S. C-5342
6 3/4 6 1/8 7 7/8 4 1/2 IF S.H. C-5222
6 3/4 6 8 3/8 4 1/2 IF F.S. 275
7 6 3/8 8 1/8 4 1/2 IF S.H. 9815
9 5/8 8 7/8 11 1/4 6 5/8 Reg F.S. C-12822
11 1/4 10 1/2 12 3/4 6 5/8 Reg F.S. 15800
8976 8977 6114 6120 6112 6113 6121
A-5172 B-5173 L-5950 A-4368 B-4369 B-4370 B-4371
7789 7788 5950 5945 5942 5944 5946
9693 9694 9689 9690 9687 9688 9691
L-9693 M-9694 L-9689 L-9690 M-9687 L-9688 L-9691
A A-5343 B-3711 L-6635 A-2373 B-2374 B-2375 A-2376
A-5223 B-5224 B-5225 A-5226 B-5227 A-5228 A-5229
276 277 207 206 209 208 205
9816 9817 9224 9225 9222 9223 9226
A-12823 B-12824 B-12825 A-12826 B-12827 B-12828 A-12829
15801 15802 15805 15807 15803 15804 15806
6112 6113 6114-R
B-4369 B-4370 L-5950-R
5942 5944 5950-R
9687 9688 9689-R
B-5227 A-5228 B-5225-R
209 208 207-R
9222 9223 9224-R
B-12827 B-12828 B-12825-R
15803 15804 15805-R
197 187 138 262
147 108 99 262
213 200 146 262
214 203 128 461
242 212 170 421
289 246 185 421
192 182 140 421
244 234 188 833
275 255 202 833
M-9687 B-2374 L-9688 B-2375 L-9689-R M-6635-R
Tensile Yield (M Ton) with Spiral Grapple Basket Grapple Basket Grapple with Stop Connection
99 100 82 140
70 63 35 140
119 98 57 220
126 103 72 140
164 140 107 262
Hollow Mill Container Hollow Mill Insert
X X
Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10.
Barry Boswell
Page 1
212 201 154 461
266 234 188 421 X X
Series 70
Baker Oil Tools - Celle Bowen Series 70 Overshots held in Stock - Celle Maximum Catch Overshot Od Standard Box Conn Type Assy Nr Replacement Parts
As at
3 21/32 4 11/16 2 7/8 Reg S.H. 10543
4 3/4 5 7/8 3 1/2 IF S.H. 10560
6 1/2 8 1/4 4 1/2 IF S.H. 38939
Top Sub Bowl
10544 10545
10561 10562
38940 38941
Basket Grapple Basket Grapple Control
10546 10547
10563 10564
38942 38943
90 90 220
169 149 262
202 N/A 428
Tensile Yield (Ton) with Basket Grapple Basket Grapple with stop Connection
Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10. Barry Boswell
Page 2
4/14/1998
Series 10
Baker Oil Tools - Celle Bowen Series 10 Overshots held in Stock - Celle Maximum Catch (Spiral) Maximum Catch (Basket) Overshot Od Type Assy Nr Replacement Parts
As at
1 5/8 1 7/16 1 29/32 S.H. 9340
Top Sub Bowl Spiral Grapple Control Guide
9341 9342 9343 9349
Basket Grapple Grapple Control Plain Guide
9343 9344 9345
Tensile Yield (M Ton) with Spiral Grapple Basket Grapple more than 1" Basket Grapple 1" or less
17.9 12.9 8.1
Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10. Barry Boswell
Page 3
4/14/1998
Series 20
Baker Oil Tools - Celle Bowen Series 20 Short Catch Overshots held in Stock - Celle Maximum Catch (Basket) Overshot Od Assy Nr Replacement Parts
1 1/2 1 29/32 11555
Top Sub Bowl
9341 11556
Basket Grapple Grapple Control
11557 9344
Tensile Yield (M Ton) with Basket Grapple
22
Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10. Barry Boswell
Page 4
As at
4/14/1998
365796685.xls
Size 4-1/16 OD w/3-1/2 catch Inputs Overshot material yield 120000 psi Overshot material UTS 125000 psi Overshot minimum OD 4.055 inches Overshot maximum ID 3.740 inches Slip taper angle 4.00 degrees Slip Taperminimum OD1 3.690 inches Slip Taper minimum OD2 3.620 inches Slip Slot Width 1.000 inches Slip number of Slots 1.000 Friction co-efficient .220 Output Burst Pressure of overshot 12418 psi Tension at Overshot thin section 231418 lbs Slip Taper Mean OD 3.655 inches Slip taper angle 0.070 radians Slip contact length prior to deformati 0.501 inches Contact Area of Slip 5.255 inches^2 Radial load to burst Overshot 65,260 lbs Axial load to plastically deform Overs 19,208 lbs Axial load to part Overshot 20,009 lbs Reference Commodities Assembly 110-07-2300 Top Sub see body Body 06-06250-00 Slip 06-06249-00 Thread up detail 2-3/8 API Reg box up Thread up tensile rating 375500 lbs Internal thread detail none Internal thread tensile rating none Summary Maximum pull through Overshot i 19208 lbs
4-1/16 OD w/3-3/4 catc 3-5/8 OD with 3-1/8 catc 3-5/8 OD with 2-7/8 catch
8-3/8 OD with 7.441 catch
125000 140000 4.055 3.960 4.00 3.925 3.875 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 3.610 3.405 4.00 3.360 3.275 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 3.610 3.155 4.00 3.110 3.025 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 8.360 7.784 4.00 7.742 7.572 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
4869 74753 3.900 0.070 0.358 4.029 19,620 5,775 6,468
psi lbs inches radians inches inches^2 lbs lbs lbs
10537 141183 3.318 0.070 0.609 5.736 60,440 17,789 19,924
psi lbs inches radians inches inches^2 lbs lbs lbs
20178 302189 3.068 0.070 0.609 5.258 106,090 31,226 34,973
psi lbs inches radians inches inches^2 lbs lbs lbs
10952 912922 7.657 0.070 1.218 28.070 307,417 90,483 101,341
psi lbs inches radians inches inches^2 lbs lbs lbs
111-07-2301 see body 06-06266-00 06-06280-00 2-3/8 API Reg box up 375500 lbs none none 5775
lbs
111-07-3100 06-06790-00 06-06789-00 06-06788-00 2-3/8 API Reg box up 375500 lbs 3-5/8 7.06# TSWP 74000 lbs 17789
06-07462-00 06-06790-00 06-07387-00 06-07386-00 2-3/8 API Reg box up 375500 lbs 3-5/8 7.06# TSWP 74000 lbs
lbs
There are no safety factors included in the above ratings. Test results :- the 4-1/16 with 3-1/2 catch was tested. Started to yield at 20000 lbs and parted at approx 40000 lbs. From the above test results all the theoretical calculations have been based. The friction factor is different for each size and wall thickness.
Page 5
31226
lbs
111-07-8300 see body 06-06879-00 06-06880-00 3-1/2 API IF box up 587310 lbs none none 90483
lbs
365796685.xls
The Slip contact length has been estimated with some deformation. As the tension results prior to deformation are too low. Written by : George Lorge Date : 30th June 94 Revised by Neil Thomson 8/23/1991 Revision numbe Revised by Neil Thomson 8/23/1991 Revision numbe Revision 1: Changed burst pressure to Lame equation. Revised by George Lorgen 4/25/1991 Revision numbe Revision 2: Changed all friction co-efficients to 0.22 Revision 3: Added 3.470/3.460 OD x 2.875 catch (111-07-AF03)
Page 6
1 2 3
365796685.xls
2-7/8 OD with 2.364 catc 2-3/4 OD with 2-3/8 catc 4-1/2 OD with 4 catch
4-3/8 OD with 3.625 catc 4-3/8 OD with 3.625 catc 3-3/8 OD with 2.875 catc 3.470 OD with 2.875 cat
110000 125000 2.860 2.662 3.50 2.623 2.524 0.500 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 2.740 2.610 3.50 2.580 2.480 0.500 1.000 .220
psi psi inches inches degrees inches inches inches
110000 125000 4.490 4.270 4.00 4.235 4.145 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
110000 125000 4.360 4.005 3.75 3.975 3.755 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
110000 125000 4.360 3.855 3.75 3.825 3.755 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 3.365 3.155 4.00 3.110 3.025 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 3.460 3.155 4.00 3.110 3.025 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
11568 94459 2.574 0.061 0.810 6.146 71,100 20,258 23,020
psi lbs inches radians inches inches^2 lbs lbs lbs
9946 68281 2.530 0.061 0.819 6.096 60,637 17,276 19,350
psi lbs inches radians inches inches^2 lbs lbs lbs
7595 166498 4.190 0.070 0.645 7.840 59,543 17,526 19,915
psi lbs inches radians inches inches^2 lbs lbs lbs
13192 256553 3.865 0.065 1.681 18.727 247,047 71,550 81,306
psi lbs inches radians inches inches^2 lbs lbs lbs
15312 358411 3.790 0.065 0.535 5.832 89,304 25,864 29,391
psi lbs inches radians inches inches^2 lbs lbs lbs
11538 134421 3.068 0.070 0.609 5.258 60,663 17,855 19,998
psi lbs inches radians inches inches^3 lbs lbs lbs
14978 198075 3.068 0.070 0.609 5.258 78,754 23,180 25,961
psi lbs inches radians inches inches^3 lbs lbs lbs
not done feasibility only see body feasibility only 06-07161-00 to be comp feasibility only 06-07160-00 to be revisefeasibility only 1-1/2 AM MT box up 1-1/2 AM MT box up 127100 lbs 127100 lbs none none none none 20258
lbs
17276
lbs
feasibility only feasibility only feasibility only feasibility only 1-1/2 AM MT box up 127100 lbs none none 17526
lbs
feasibility only feasibility only feasibility only feasibility only 4-3/8 13.58# TSWP box 134000 lbs none none 71550
lbs
Page 7
feasibility only 111-07-AF02 feasibility only 0A-03013-00 feasibility only 0A-03012-00 feasibility only 06-07386-00 4-3/8 13.58# TSWP box 2-3/8 API Reg box up 134000 lbs 375500 lbs none 3-3/8 10.02# TSWP none 111,500 lbs 25864
lbs
17855
lbs
111-07-AF03 0A-03037-00 0A-03038-00 06-07386-00 2-3/8 API Reg box up 375500 lbs 3-3/8 10.02# TSWP 111,500 lbs 23180
lbs
365796685.xls
3-7/16 OD with 3 catch
2.5" CT connector
4"OD w/3-3/8 catch
3-7/8"OD w/3-3/8 catch 2.675" OD w/2.25" catch 2.340" OD w/2.125" catc 3-7/16" OD w/3-1/8 catch
125000 140000 3.428 3.280 4.00 3.235 3.150 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
110000 125000 2.485 2.344 15.00 2.235 1.953 0.310 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 3.995 3.615 4.00 3.565 3.495 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 3.870 3.615 4.00 3.565 3.495 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
125000 140000 2.670 2.530 4.00 2.485 2.400 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
8882 97466 3.193 0.070 0.609 5.497 48,821 14,370 16,094
psi lbs inches radians inches inches^4 lbs lbs lbs
18650 58825 2.094 0.262 0.539 3.376 62,963 32,190 36,579
psi lbs inches radians inches inches^5 lbs lbs lbs
15390 283902 3.530 0.070 0.501 5.058 77,848 22,913 25,663
psi lbs inches radians inches inches^6 lbs lbs lbs
11462 187384 3.530 0.070 0.501 5.058 57,981 17,066 19,114
psi lbs inches radians inches inches^7 lbs lbs lbs
11103 71471 2.443 0.070 0.609 4.063 45,105 13,276 14,869
psi lbs inches radians inches inches^7 lbs lbs lbs
111-07-AF01 see body 0A-01871-00 0A-01872-00 2-3/8" API REG Box up 375500 lbs none none
feasibility feasibility feasibility feasibility
feasibility only feasibility only feasibility only feasibility only 2-3/8 PAC DSI box up 201,900 lbs none none 14370
lbs
feasibility only feasibility only feasibility only
lbs none none 32190
lbs
22913
lbs
only only only only lbs
none none 17066
lbs
Page 8
111-07-AF04 See Body 0A-03498-00 0A-03497-00 1-1/2 AM MT box up 127100 lbs none none 13276
lbs
125000 140000 2.335 2.300 4.00 2.260 2.230 1.000 1.000 .220 4911 15926 2.245 0.070 0.215 1.301 6,387 1,880 2,105 feasibility feasibility feasibility feasibility feasibility feasibility none none 1880
psi psi inches inches degrees inches inches inches
125000 140000 3.423 3.405 4.00 3.360 3.275 1.000 1.000 .220
psi psi inches inches degrees inches inches inches
psi lbs inches radians inches inches^7 lbs lbs lbs
3894 11730 3.318 0.070 0.609 5.736 22,334 6,574 7,363
psi lbs inches radians inches inches^2 lbs lbs lbs
only only only only only onlbs
lbs
feasibility feasibility feasibility feasibility feasibility feasibility none none 6574
only only only only only onlbs
lbs
Bulldog
Baker Oil Tools - Celle Baker Bull Dog Overshots Held in Stock-Celle
As at
Catch Size (Special) Overshot Od Assy Nr Replacement Parts Top Sub Bowl Special Grapple Tensile Yield (M Ton) with
Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10. Barry Boswell
Page 9
4/14/1998
KELO
Baker Oil Tools - Celle Baker Kelo Overshots Held in Stock-Celle
As at
Catch Size (Special) Overshot Od Assy Nr Replacement Parts Top Sub Bowl Special Grapple Tensile Yield (M Ton) with
Note: All strengths listed are caculated theoretical yield points and accurate within 20%. It should be noted, however, that all strengths assume a straight, steady pull and full grapple engagement of a round fish. Anything less than Full engagement or straight pulling will reduce the listed stength substantially. Tong marks and other surface damage to the bowl will also reduce the strength. Jarring may amplify the pull load by a factor of 3 to 10. Barry Boswell
Page 10
4/14/1998
STYLE "G" (SERIES 150) OVERSHOTS ASSEMBLY NUMBERS (SALES LIST)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
OVERSHOT O.D.
H. E. ASSY. #
BOWEN ASSY. #
BOWEN GRAPPLE #
2-15/93 -21/8 -23/8 -25/8 -27/8 -7/2 -29/8 -29/8 -15/4 -31/8 3-82/97 4 4 -33/8 -33/8 3-56/85 -17/4 -17/4 -35/8 -35/8 -9/2 -9/2 3-97/87 -37/8 -37/8
225000 225050 225100 225150 225300 225350 225400 225450 225600 225650 225750 225800 225850 226100 226150 226200 226250 226300 226400 226550 226650 226800 226850 226900 226950
B-8919 C-10199 16395 9305 C-4623 C-4741 C-5080 N-9270 37585 C-1835 C-5101 C-4736 C-5104 N-9105 C-5115 C-5098 C-4822 C-5126 C-5112 C-4619 C-5123 17201 C-5151 1255 C-5129
L-9403 B-10204 16392 9307 B-5091 B-782 B-5085 M-9272 37590 B1837 B-3596 M-805 B-5109 M-1741 B-5120 B-4403 B-791 B-4627 B-3205 B-3607 B-3359 B-4339 B-4339 1249 B-5133
BOWEN GOTCO BOWL # STRENGTH ASSY. # B-8921 B-10201 16397 9306 B-5088 B-4743 B-5082 M-9271 37587 B-1836 B-5103 B-4738 B-5106 M-9107 B-5117 B-5100 B-4824 B-5128 B-5114 B-4621 B-5125 17203 B-5153 1248 B-5131
11
SH SH SH XSH SH FS FS XSH SH SH SH FS SH FS SH FS FS SH FS SH FS SH SH FS SH
OS-20 OS-22 OS-25 OS-23 OS-30 OS-24 OS-21 OS-02X OS-01 OS-13 OS-07 OS-43 OS-47 OS-31 OS-15 OS-34 OS-14 OS-18 OS-16 OS-33 OS-32 OS-28 OS-35 OS-26 OS-29
09/13/2017
SPIRAL BASKET MAX CATCH MAX CATCH 2 -17/8 -17/8 -19/8 -5/2 -19/8 -5/2 -23/8 2-91/95 -25/8 2-91/95 -23/8 -25/8 -25/8 -13/4 2-91/95 -25/8 -27/8 -13/4 -7/2 -27/8 3-40/93 3-40/93 -7/2 -15/4
-7/4 -7/4 -7/4 2 2 -15/8 2 -5/2 2-50/93 -21/8 -41/16 -19/8 -21/8 -21/8 -11/4 1-79/69 -21/8 -23/8 -11/4 -23/8 -23/8 -25/8 -25/8 3 2-35/73
STYLE "G" (SERIES 150) OVERSHOTS ASSEMBLY NUMBERS (SALES LIST)
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 47 48 49 50 51 52
OVERSHOT O.D. -37/8 4-36/93 4-36/93 4-38/91 -39/8 5 5 -41/8 -41/8 -41/8 -41/8 -21/4 5-26/99 -43/8 4-84/89 -11/2 4-84/87 -45/8 -45/8 -23/4 -23/4 5-29/91 -47/8 5-76/97 5-76/95 -49/8
H. E. ASSY. # 227000 227150 227200 227400 227500 227550 227650 227700 227750 227850 227900 228000 228050 228100 228150 228200 228250 228400 228500 228550 228650 228750 228800 228850 229050 229100
BOWEN ASSY. # C-6230 9109 9120 C-4732 C-5154 C-5148 C-5428 C-4561 C-4686 C-5162 4716 9515 C-5142 C-5165 C-5425 C-4969 5896 5698 C-5168 8975 C-7096 C-4814 C-5171 5737 C-4829 912
BOWEN GRAPPLE # B-6234 6662 9123 164 B-5159 B-4410 B-4897 164 B-814 B-4674 4674 859 B-1505 B-2489 B-1997 M-1135 165 1135 B-2201 6112 B-6389 B-1987 B-4369 196 B-2364 1182
BOWEN GOTCO BOWL # STRENGTH ASSY. # B-6232 SH OS-64 9111 SFS OS-3 9121 SFS OS-36 B-4734 FS OS-38 B-5156 SH OS-67X B-5150 FS OS-51 B-5430 SH OS-57 B-4563 FS OS-50 B-4688 FS OS-41 B-5164 SH OS-59 4717 SH OS-69 9517 FS OS-05 B-5144 FS OS-56 B-5167 SH OS-53 B-5427 FS OS-44 B-4971 SH OS-72 5898 FS OS-42 5700 FS OS-74 B-5170 SH OS-46 8977 FS OS-04 B-7098 SH OS-96 B-4816 FS OS-48 B-5173 SH OS-58 5735 FS OS-80 B-4831 FS OS-95 905 FS OS-62
12
09/13/2017
SPIRAL BASKET MAX CATCH MAX CATCH -31/8 -27/8 3-40/93 3.220 -15/4 -13/4 -7/2 -23/8 4 -7/2 3-40/93 -25/8 -33/8 -29/8 -7/2 -23/8 -15/4 -25/8 -17/4 -15/4 -17/4 -15/4 -31/8 -13/4 4 -27/8 -9/2 -31/8 -33/8 -7/2 -37/8 -33/8 -17/4 3-43/93 -37/8 -33/8 -19/4 -17/4 -19/4 -17/4 -39/8 -17/4 -9/2 -31/8 5 -9/2 -37/8 4 -19/4 -33/8 -39/8 -17/4
STYLE "G" (SERIES 150) OVERSHOTS ASSEMBLY NUMBERS (SALES LIST)
53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78
OVERSHOT O.D. -49/8 5-26/85 -51/8 -13/2 -53/8 -53/8 -55/8 -57/8 -29/4 -59/8 -59/8 -15/2 -61/8 -61/8 -61/8 -31/4 -31/4 -31/4 -63/8 -63/8 8 -65/8 -65/8 -65/8 -65/8 -33/4
H. E. ASSY. # 229200 229250 229400 229500 229550 229650 229950 230050 230200 230350 230500 230700 230950 231000 231300 231400 231450 231550 231700 232050 232100 232200 232250 232450 232500 232650
BOWEN ASSY. # 7787 C-7093 6655 4773 C-4825 8625 8978 C-5176 C-5206 C-4689 9692 9009 7572 8741 9860 C-5204 9163 4785 C-2108 C-5222 8995 C-5342 9339 9815 9217 C-3032
BOWEN GRAPPLE # 5942 B-2457 4498 9207 M-1071 8619 6699 B-759 B-5211 M-104 9687 9003 220 1644 9863 B-2063 5503 9137 B-2073 B-5227 8987 B-2374 84 9222 9222 N-84
BOWEN GOTCO BOWL # STRENGTH ASSY. # 7788 SFS OS-61 B-7095 FS OS-97 4503 SH OS-63 9205 SH OS-102 B-4827 FS OS-98 8617 SH OS-66 8980 SH OS-68 B-2791 FS OS-104 B-5208 SH OS-117 B-3522 FS OS-71 9694 SH OS-73 9011 SH OS-125 7574 FS OS-75 1641 SFS OS-06 9862 SH B-4218 FS OS-77 9164 SFS OS-775 9134 SH OS-126 B-2109 FS OS-78 B-5224 SH OS-79 8997 SH OS-81 B-3711 FS OS-85 9337 SFS OS-128 9817 SH OS-132 9219 SH OS-08 B-3034 FS OS-129
13
09/13/2017
SPIRAL BASKET MAX CATCH MAX CATCH 5 -35/8 -39/8 -17/4 -21/4 -37/8 -43/8 -19/4 5 -17/4 -11/2 -39/8 -23/4 -41/8 -11/2 -19/4 -49/8 -11/2 -23/4 5 -25/4 -45/8 -51/8 -23/4 6 -21/4 -25/4 4-84/87 -13/2 -47/8 -49/8 -43/8 -51/8 -45/8 -53/8 6 -25/4 -11/2 -27/4 -49/8 -55/8 -25/4 -13/2 -23/4 -53/8 -47/8 7 -51/8 7 -51/8 -53/8 -47/8
STYLE "G" (SERIES 150) OVERSHOTS ASSEMBLY NUMBERS (SALES LIST)
79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 97 98 99 100 101 102 103 104 105
OVERSHOT O.D. -67/8 -67/8 -67/8 -17/2 -69/8 -69/8 -35/4 -71/8 -71/8 -71/8 9 -73/8 -73/8 -75/8 -75/8 -19/2 -77/8 -77/8 9-56/95 -81/8 -41/4 -21/2 -85/8 -45/4 -91/8 -47/4
H. E. ASSY. # 232750 232850 232900 233000 233150 233250 233350 233500 233550 233600 233700 233800 233850 233950 234050 234100 234150 234300 234400 234450 234600 234700 234750 234950 235050 235150
BOWEN ASSY. # 275 17208 C-5354 4793 C-4817 C-7101 4796 C-5352 C-5257 9850 C-5230 C-7099 C-5265 1665 C-1500 4834 264 C-5284 C-1230 8960 C-5297 C-5305 5321 C-12822 26255 5329
BOWEN GRAPPLE # 209 9222 B-5359 9235 N-105 B-7106 9241 M-1027 B-5262 9853 C-4156 B-3454 B-5270 85 N-85 9057 238 B-5289 C-1232 8957 B-5302 B-5310 5326 B-12827 26258 5334
BOWEN GOTCO BOWL # STRENGTH ASSY. # 277 FS OS-83 17209 SH OS-84 B-5356 SH OS-136 9233 SH OS-138 B-3819 FS OS-86 B-7103 SH OS-142 9239 SH OS-87 M-1026 FS OS-88 B-5259 SH OS-89X 9852 SH OS-145 B-5232 FS OS-140 B-4516 FS OS-91 B-5267 SH OS-92 1283 FS OS-93 B-1501 FS OS-146 9062 SH OS-149 266 FS OS-09 B-5286 SH OS-151 B-1231 FS OS-150 8962 FS OS-101 B-5299 SH OS-154 B-5307 FS OS-156 5323 FS OS-10 B-12824 FS OS-112 26257 FS OS-113 5331 FS OS-11
14
09/13/2017
SPIRAL BASKET MAX CATCH MAX CATCH -27/4 6 7 -51/8 -29/4 -53/8 -59/8 -27/4 7 -25/4 -15/2 -55/8 -61/8 7 -29/4 -13/2 -31/4 7 -31/4 -57/8 -59/8 -53/8 -15/2 -27/4 8 -29/4 -31/4 7 -31/4 7 -67/8 -31/4 8 -29/4 -17/2 -63/8 -67/8 -61/8 -17/2 -31/4 -69/8 -63/8 -71/8 -65/8 9 -33/4 -77/8 -71/8 -39/4 9 -81/8 -75/8
STYLE "G" (SERIES 150) OVERSHOTS ASSEMBLY NUMBERS (SALES LIST)
106 107 108 109 110
OVERSHOT O.D. -51/4 -55/4 16 -67/4 -83/4
H. E. ASSY. # 235350 235400 235450 235500 235550
BOWEN ASSY. # 15800 33006 68028 64553 31653
BOWEN GRAPPLE # 15803 33009 68033 64558 31658
BOWEN GOTCO BOWL # STRENGTH ASSY. # 15802 FS OS-12 33008 FS OS-161 68030 FS OS-162 64555 FS OS-164 31655 FS OS-165
15
09/13/2017
SPIRAL BASKET MAX CATCH MAX CATCH -45/4 -21/2 12 -45/4 14 -53/4 -59/4 14 -67/4 16
Turned Down Bowl Strengths
Baker Oil Tools SERIES 150 BOWL STRENGTHS INCREMENTED FOR TURNED DOWN OD'S BOWL NUMBER
B-1836
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
1/64 3.88 (See Instruction Manual)
1/16 8.13 (See Instruction Manual)
1/64 4.38 (See Instruction Manual)
3.818 141100 131200 89200
3.802 136000 126400 86000
8.068 577000 506900 406800
8.005 541500 475800 381800
7.943 506100 444600 356800
* 7.88 440000 413500 331800
* 7.818 347500 347500 306800
* 7.755 255800 255800 255800
4.364 260400 214900 140500
4.349 253300 209100 136700
4.333 246200 203200 132900
4.864 376300 235800 163300
4.849 367000 230000 159200
4.833 357700 224200 155200
4.818 348400 218400 151200
4.802 339100 212500 147100
4.786 329800 206700 143100
4.771 320500 200900 139100
4.755 311200 195000 135000
11.719 599700 513800 409800
11.688 582000 498700 397700
11.656 564200 483500 385600
11.625 546500 468300 373500
11.594 528800 453100 361300
11.563 511100 437900 349200
11.531 493400 422800 337100
11.5 475600 407600 325000
B-5156
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
1/64 4.88 (See Instruction Manual) 5331
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
3.833 146300 136000 92500
B-4621
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
3.849 151500 140800 95800
B-3711
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
3.864 156600 145600 99000
1/32 11.75 (See Instruction Manual) 7788
Page 16
4.739 301900 189200 131000
Turned Down Bowl Strengths
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
1/32 6.13 (See Instruction Manual)
6.099 406000 375300 275200
6.068 387800 358500 262900
6.036 369600 341700 250600
6.005 351400 324900 238200
5.974 333200 308000 225900
5.943 315000 291200 213600
5.911 296800 274400 201200
5.88 278700 257600 188900
5.719 385900 362200 265600
5.688 368000 345400 253300
5.656 350100 328600 241000
5.625 332200 311800 228700
5.594 314300 295000 216300
5.563 296300 278200 204000
5.531 278400 261300 191700
5.5 260500 244500 179300
4.099 276400 227200 151500
4.068 263300 216500 144300
4.036 250300 205700 137100
4.005 237200 195000 130000
3.974 224100 184200 122800
3.943 211000 173400 115600
3.911 197900 162700 108400
4.656 296600 248900 177800
4.625 283500 237900 169900
4.594 270400 226900 162100
4.563 257300 215900 154200
4.531 244200 204900 146400
4.5 231100 193900 138500
4.469 218000 182900 130700
11.188 577000 506900 406800
11.125 541500 475800 381800
11.063 506100 444600 356800
11 470700 413500 331800
* 10.938 352800 352800 306800
3.734 195300 198400 161200
3.719 188200 191200 155400
3.703 181200 184100 149500
3.688 174100 176900 143700
8977
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
1/32 5.75 (See Instruction Manual) 9107
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
1/32 4.13 (See Instruction Manual) 9111
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop
1/32 4.688 (See Instruction Manual)
BOWL NUMBER B-12824 OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop BOWL NUMBER
1/16 11.25
37587
OD Increments Bowl OD Spiral Grapple Load Basket Grapple Load Basket W/Stop
1/64 3.75
Page 17
5.469 242600 227700 167000
Grapple Catch Range
Baker Oil Tools - Fishing 5 3/4 FS Overshot Gr 6112 Grapple Catch Range Size Stamped Min Inches 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 3 1/8 3 1/4 3 3/8 3 1/2 3 5/8 3 21/32 3 3/4 3 7/8 4 4 1/8 4 1/4 4 3/8 4 1/2 4 5/8 4 3/4
29/32 1 1/32 1 5/32 1 9/32 1 13/32 1 17/32 1 21/32 1 25/32 1 29/32 2 1/32 2 5/32 2 9/32 2 13/32 2 17/32 2 21/32 2 25/32 2 29/32 3 1/32 3 5/32 3 9/32 3 13/32 3 17/32 3 9/16 3 21/32 3 25/32 3 29/32 4 1/32 4 5/32 4 9/32 4 13/32 4 17/32 4 21/32
Max Inches
Min mm
Max mm
1 1/32 1 5/32 1 9/32 1 13/32 1 17/32 1 21/32 1 25/32 1 29/32 2 1/32 2 5/32 2 9/32 2 13/32 2 17/32 2 21/32 2 25/32 2 29/32 3 1/32 3 5/32 3 9/32 3 13/32 3 17/32 3 21/32 3 11/16 3 25/32 3 29/32 4 1/32 4 5/32 4 9/32 4 13/32 4 17/32 4 21/32 4 25/32
23.02 26.19 29.37 32.54 35.72 38.89 42.07 45.24 48.42 51.59 54.77 57.94 61.12 64.29 67.47 70.64 73.82 76.99 80.17 83.34 86.52 89.69 90.49 92.87 96.04 99.22 102.39 105.57 108.74 111.92 115.09 118.27
26.19 29.37 32.54 35.72 38.89 42.07 45.24 48.42 51.59 54.77 57.94 61.12 64.29 67.47 70.64 73.82 76.99 80.17 83.34 86.52 89.69 92.87 93.66 96.04 99.22 102.39 105.57 108.74 111.92 115.09 118.27 121.44
Page 18
Grapple Catch Range
Barry Boswell
6/12/1998
Page 19
365796685.xls
BAKER OIL TOOLS - FISHING MAX OVERSHOT OD TO RUN IN CASING Casing
Weight
OD Overshot
Max Catch
4 1/2 4 1/2
9,5-11,6# 13,5-15,1#
3 7/ 8 3 3/ 4
3 1/ 8 3 1/16
5"
11,5-18#
4"
3 1/ 8
5 1/2
14-23#
4 9/16
3 21/32
6 6 6 6
20# 24# 28# 32#
5 5 5 4
5" 4 3/ 4 4 3/ 4 3 21/32
7" 7" 7"
20-26# 29-35# 38#
6 1/ 8 5 7/ 8 5 3/ 4
5" 5" 4 3/ 4
7 5/8
26,4-39#
6 1/ 8
5"
8 5/8 8 5/8
24-28# 32-49#
7 7/ 8 7 3/ 8
6 3/ 4 6 1/ 4
9 5/8
36-53,5#
8 3/ 8
6 3/ 4
10 3/4
40,5-65,7#
8 3/ 8
6 3/ 4
11 3/4
47-60#
8 3/ 8
6 3/ 4
13 3/8
54,5-72#
11 3/ 4
10 1/ 8
16"
75-84#
12 3/ 4
11 1/ 4
5/8 5/8 5/8 5/8
7/ 8 3/ 4 5/ 8 9/16
Page 20
365796685.xls
API CASING OVERSHOT SIZES KEPT IN STOCK , CELLE
Standard Series 150 Overshot, Can Be Full Strength Or Slimhole Barry Boswell
Page 21
JDC Fishing Neck Profile
Baker Oil Tools - Fishing - Celle
Page 22
JDC Fishing Neck Profile
Page 23
JDC
Baker Oil Tools - Celle Baker JDC Hydraulic Release Overshots held in Stock - Celle
Catch Size Tool Od Standard Box Conn. Tensile Yield (Metric Ton)
Page 24
As at
4/14/1998
JDC Slick Catch
Baker Oil Tools - Celle Baker JDC Hydraulic Release Slick Catch Overshots held in Stock - Celle
As at Catch Size Tool Od Standard Box Conn. Tensile Yield (Metric Ton)
Page 25
4/14/1998
View more...
Comments
