All ANSI Standards List

NEMA ANSI IEC NTCIP ANSLG HIMSS

Type of code

Standard code

ANSI

ANSI C119.1-2011

ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI

ANSI C119.4-2011 ANSI C119.5-2009 ANSI C119.6-2011 ANSI C12.10-2011 ANSI C12.11-2007 ANSI C12.1-2008 ANSI C12.18-2006 ANSI C12.19-2008 ANSI C12.20-2010 ANSI C12.21-2006 ANSI C12.22-2008 ANSI C12.4-1984 (R2002, R2011) ANSI C12.5-1978 (R2002, R2012) ANSI C12.6-1987 (R2002, R2012) ANSI C12.7-2005 ANSI C12.8-1981 (R2002, R2012) ANSI C12.9-2005 ANSI C136.10-2010 ANSI C136.11-2011 ANSI C136.1-2012 ANSI C136.12-2004 (R2009) ANSI C136.13-2004 (R2009) ANSI C136.14-2004 (R2009) ANSI C136.15-2011 ANSI C136.16-2009 ANSI C136.17-2005(R2010) ANSI C136.18-2006(R2010) ANSI C136.19-2011 ANSI C136.20-2012 ANSI C136.21-2004 (R2009) ANSI C136.2-2004 (R2009)

ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI

ANSI C136.22-2004 (R2009) ANSI C136.23-2012 ANSI C136.24-2004 (R2010) ANSI C136.25-2009 ANSI C136.26-2010 ANSI C136.27-2012 ANSI C136.28-2006 (R2011) ANSI C136.29-2011 ANSI C136.31-2010 ANSI C136.3-2005 (R2009) ANSI C136.32-2012 ANSI C136.33-2005 ANSI C136.34-2004 (R2009) ANSI C136.35-2009 ANSI C136.36A-2010 ANSI C136.36B-2008 ANSI C136.36C-2010 ANSI C136.37-2011 ANSI C136.38-2009 ANSI C136.40-2011 ANSI C136.4-2003 (R2009) ANSI C136.5-2003 (R2009) ANSI C136.6-2004 (R2012) ANSI C136.9-2003 (R2012) ANSI C18.1M, Part 1-2009 ANSI C18.1M, Part 2-2011 ANSI C18.2M, Part 1-2007 ANSI C18.2M, Part 2-2007 ANSI C18.3M, Part 1-2008 ANSI C18.3M, Part 2-2011 ANSI C29.17-2002 ANSI C29.18-2003 ANSI C29.3-1986 (R2002, R2012) ANSI C37.50-2012 ANSI C37.51-2003 (R2010) ANSI C37.51a-2010 ANSI C37.52-1974 (R1995, R2000) ANSI C37.54-2002 (R2010) ANSI C37.55-2002 (R2010) ANSI C37.57-2003 (R2010) ANSI C37.58-2003 (R2010) ANSI C37.85-2002 (R2010) ANSI C62.61-1993 ANSI C78.1340-1990 (R1995)

ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI

ANSI C78.1341-1990 (R1995) ANSI C78.1342-1990 (R1995) ANSI C78.1372-1997 ANSI C78.1374-1996 ANSI C78.1375-1996 ANSI C78.1376-1996 ANSI C78.1377-1996 ANSI C78.1378-1997 ANSI C78.1379-1997 ANSI C78.1380-1988 ANSI C78.1381-1998 ANSI C78.1382-1996 ANSI C78.1384-1997 ANSI C78.1401-2004 ANSI C78.1402-2004 ANSI C78.1403-1997 ANSI C78.1404-1991 (R1995) ANSI C78.1406-2004 ANSI C78.1407-2004 ANSI C78.1408-2004 ANSI C78.1409-1991 (R1995) ANSI C78.1410-1991 (R1995) ANSI C78.1411-1991 (R1995) ANSI C78.1412-1991 (R1995) ANSI C78.1413-2001 ANSI C78.1414-1988 (R1994) ANSI C78.1415-1989 (R1994) ANSI C78.1417-1997 ANSI C78.1418-1991 (R1995) ANSI C78.1419-1991 (R1995) ANSI C78.1420-2001 ANSI C78.1421-2002 ANSI C78.1430-1997 ANSI C78.1431-1997 ANSI C78.1432-1997 ANSI C78.1433-2001 ANSI C78.1434-2001 ANSI C78.1435-2002 ANSI C78.1450-1983 (R2002) ANSI C78.1451-2002 ANSI C78.1452-2004 ANSI C78.1460-2004

ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI_ANSLG ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI ANSI/IEC ANSI/IEC

ANSI C78.1500-2001 ANSI C78.1501-2001 ANSI C78.1503-2001 ANSI C78.1504-2001 ANSI C78.1505-2001 ANSI C78.180-2003 ANSI C78.20-2003 ANSI/ANSLG C78.42-2009 ANSI C78.22-1995 (R2003) ANSI C78.23-1995 (R2003) ANSI C78.24-2001 ANSI C78.260-2002 ANSI C78.261-1977 (R2007) ANSI C78.30-1997 ANSI C78.370.390-2002 ANSI C78.370-1997 (R2003) ANSI C78.375-1997 ANSI C78.376-2001 ANSI C78.379-2006 ANSI C78.386-1989 (R1994) ANSI C78.389-2004 (R2009) ANSI C78.390-2006 ANSI C78.391-2004 ANSI C78.5-2003 ANSI C79.1-2002 ANSI C80.1-2005 ANSI C80.3-2005 ANSI C80.5-2005 ANSI C80.6-2005 ANSI C82.1-2004 ANSI C82.12-1999 ANSI C82.13-2002 ANSI C82.2-2002 ANSI C82.3-2002 ANSI C82.4-2002 ANSI C82.6-2005 ANSI C82.77-2002 ANSI C84.1-2011 ANSI Z535.1-2006 (R2011) ANSI Z535.2-2011 ANSI Z535.3-2011 ANSI Z535.4-2011 ANSI Z535.5-2011 ANSI Z535.6-2011 ANSI Z535-2011 ANSI/IEC 60529-2004 ANSI/IEC 60974-11-2009

ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/IEC ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA

ANSI/IEC 60974-1-2008 ANSI/IEC 60974-12-2009 ANSI/IEC 60974-2-2009 ANSI/IEC 60974-3-2009 ANSI/IEC 60974-5-2009 ANSI/IEC 60974-7-2009 ANSI/IEC 60974-8-2008 ANSI/IEC 62430-2010 ANSI/IEC C78.682-1997 (R2010) ANSI/IEC C78.901-2005 ANSI/IEC C81.64-2005 ANSI/NEMA AB 3-2013 ANSI/NEMA AB 4-2009 ANSI/NEMA C29.10-1989 (R2002, R2012) ANSI/NEMA C29.11-2012 ANSI/NEMA C29.1-1988 (R2002, R2012) ANSI/NEMA C29.12-1997 (R2002, R2012) ANSI/NEMA C29.13-2012 ANSI/NEMA C29.2-2012 ANSI/NEMA C29.4-1989 (R2002, R2012) ANSI/NEMA C29.5-1984 (R2002, R2012) ANSI/NEMA C29.6-1994 (R2002, R2012) ANSI/NEMA C29.7-1996 (R2002, R2012) ANSI/NEMA C29.8-1985 (R2002, R2012) ANSI/NEMA C29.9-1983 (R2002, R2012) ANSI/NEMA C50.41-2012 ANSI/NEMA C78.LL 1256-2003 ANSI/NEMA C78.LL 3-2003 ANSI/NEMA C78.LL 4-2003 ANSI/NEMA C93.1-1999 ANSI/NEMA CC 1-2009 ANSI/NEMA FB 11-2000 ANSI/NEMA FB 1-2012 ANSI/NEMA FI 1-2004 ANSI/NEMA FI 3-2004 ANSI/NEMA FL 1-2009 ANSI/NEMA GR 1-2007 ANSI/NEMA HP 3-2012 ANSI/NEMA HP 4-2012 ANSI/NEMA HP 8-2013 ANSI/NEMA ICS 8-2011 ANSI/NEMA KS 2-2013 ANSI/NEMA LD 3-2005 ANSI/NEMA MG 1-2011

ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI/NEMA ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG ANSI_ANSLG HIMSS/NEMA NEMA NEMA NEMA NEMA

ANSI/NEMA MW 1000-2012 ANSI/NEMA OS 1-2008 (R2010) ANSI/NEMA OS 2-2008 (R2010) ANSI/NEMA PB 1.1-2007 ANSI/NEMA PB 2.1-2007 ANSI/NEMA SB 40-2010 ANSI/NEMA SG-IC 1-2013 ANSI/NEMA WC 27500-2012 ANSI/NEMA WC 51-2009/ICEA P-54-440 ANSI/NEMA WC 53-2008/ICEA T-27-581 ANSI/NEMA WC 54/ICEA T-26-465-2013 ANSI/NEMA WC 57-2004/ICEA S-73-532 ANSI/NEMA WC 61-2005 ANSI/NEMA WC 63.2-1996 (R2003) ANSI/NEMA WC 66-2001 ANSI/NEMA WC 67-2012 ANSI/NEMA WC 70-2009/ICEA S-95-658-2009 ANSI/NEMA WC 71-1999/ICEA S-96-659-1999 ANSI/NEMA WC 74/ICEA S-93-639-2012 ANSI/NEMA WD 6-2002 (R2008) ANSI_ANSLG C78.21-2011 ANSI_ANSLG C78.357-2010 ANSI_ANSLG C78.377-2011 ANSI_ANSLG C78.380-2007 ANSI_ANSLG C78.40-2011 ANSI_ANSLG C78.41-2006 ANSI_ANSLG C78.43-2013 ANSI_ANSLG C78.44-2008 ANSI_ANSLG C78.45-2007 ANSI_ANSLG C78.60432:1-2007 ANSI_ANSLG C78.60432:2-2007 ANSI_ANSLG C78.60432:3-2007 ANSI_ANSLG C78.81-2010 ANSI_ANSLG C81.61-2009 ANSI_ANSLG C81.62-2009 ANSI_ANSLG C81.63-2007 ANSI_ANSLG C82.11-2011 ANSI_ANSLG C82.14-2006 ANSI_ANSLG C82.9-2010 HIMSS/NEMA HN 1-2008 NEMA 107-1987 (R1993) NEMA 250-2008 NEMA 260-1996 (2004) NEMA 410-2011

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NEMA 5RN 2189-2003 NEMA AB 1 NEMA AB 5-2011 NEMA ABP 1-2010 NEMA ABP 2-2011 NEMA BL 1-1997 (R2002) NEMA BL 2-2009 NEMA BU 1 NEMA BU 1.1-2005 (Spanish) NEMA BU 1.1-2010 NEMA BU 1.2-2002 (R2008) NEMA C12.24 TR-2011 NEMA CB 1-2000 (R2012) NEMA CG 1-2001 NEMA CG 2-2004 NEMA CG 3.2-1998 NEMA CP 1-2000 (R2008) NEMA DC 10-2009 NEMA DC 12-1985 (R1991, R1996, R2002, R2008) NEMA DC 13-1979 (R1985, R1991, R1997, R2002, R2008) NEMA DC 20-1992 (R2003, R2009) NEMA DC 2-1982 (R1988) NEMA DC 3, Annex A-2010 NEMA DC 3-2008 NEMA DC 5-1989 (R1996, R2002, R2008) NEMA EI 21.1-1993 (R2002) NEMA EI 21.2-1991 (R1997, R2002) NEMA EM 1-2010 NEMA EW 1-1988 (R1994, R1999, R2004) NEMA EW 3-1983 (R1995, R1999, R2002) NEMA EW 4-2009 NEMA EW 6-2006 NEMA EW 9-2012 NEMA FB 2.10-2012 NEMA FB 2.20-2012 NEMA FG 1-1993 NEMA FI 2-1992 (R1999, R2004) NEMA FU 1-2002 (R2007) NEMA HP 100-1991 (R1999, R2005, R2010) Series (HP 100-100.4) NEMA HP 5-2009 NEMA HP 6-2007

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NEMA HP 7-2011 NEMA HV 2-1991 (R1996, R2002, R2012) NEMA IA 2.1-2005 NEMA IA 2.2-2005 NEMA IA 2.3-2005 NEMA IA 2.4-2005 NEMA IA 2.5-2005 NEMA IA 2.7-2005 NEMA IA 2.8-2005 NEMA ICS 1.1-1984 (R1988, R1993, R1998, R2003, R2009) NEMA ICS 1.3-1986 (R2001, R2009) NEMA ICS 10-2005, Part 1 NEMA ICS 10-2005, Part 2 NEMA ICS 10-2010, Part 3 NEMA ICS 12.1-1997 NEMA ICS 1-2000 (R2005, R2008) NEMA ICS 14-2010 NEMA ICS 15.1-2012 NEMA ICS 15-2011 NEMA ICS 16-2001 NEMA ICS 18-2001 (R2007) NEMA ICS 19-2002 (R2007) NEMA ICS 2.3-1995 (R2002, R2008) NEMA ICS 2.4-2003 (R2012) NEMA ICS 20-2009 NEMA ICS 2-1996, Part 8 (R2004, R2009) NEMA ICS 2-2000 (R2005) NEMA ICS 2-2002, Part 9 (R2007, R2013) NEMA ICS 3.1-2009 NEMA ICS 3-2005 (R2010) NEMA ICS 4-2010 NEMA ICS 5, Annex B-2002 (R2008) NEMA ICS 5, Annex E-2002 (R2008) NEMA ICS 5, Annex F-2002 (R2007, R2012) NEMA ICS 5-2000 (R2005, R2010) NEMA ICS 61800-1-2002 (R2007) NEMA ICS 61800-2-2005 NEMA ICS 61800-4-2004 NEMA ICS 6-1993 (R2001, R2006) NEMA ICS 7.1-2006

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NEMA ICS 7-2006 NEMA IIC 1 v02 NEMA KS 1-2001 (R2006) NEMA KS 3-2010 NEMA LA 1-2009 NEMA LC 1-2007 NEMA LD 3.1-1995 NEMA LE 4-2012 NEMA LE 5-2001 NEMA LE 5A-1999 NEMA LE 5B-1998 NEMA LE 6-2009 NEMA LI 1-2011 NEMA LI 6-1993 (R1999, R2005) NEMA LL 1-1997 NEMA LL 2-1997 (R2002) NEMA LL 3-1999 NEMA LL 4-1999 NEMA LL 5-1999 NEMA LL 6-1999 NEMA LL 7-2006 NEMA LL 8-2010 NEMA LL 9-2011 NEMA LS 1-1992 (R2000) NEMA LSD 10-2000 NEMA LSD 11-2010 NEMA LSD 1-2003 (R2011) NEMA LSD 13-2001 NEMA LSD 14-2012 NEMA LSD 15-1993 (R2001) NEMA LSD 17-1997 (R2001) NEMA LSD 18-2003 (R2012) NEMA LSD 21-2012 NEMA LSD 2-2012 NEMA LSD 22-2001 NEMA LSD 23-2010 NEMA LSD 24-2012 NEMA LSD 25-2008 NEMA LSD 27-2012 NEMA LSD 29-2012 NEMA LSD 2A-2007 NEMA LSD 2B-1999 NEMA LSD 31-2005 NEMA LSD 3-2012 NEMA LSD 34-2012 NEMA LSD 35-2012

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NEMA LSD 37-2008 NEMA LSD 39-2012 NEMA LSD 40-2008 NEMA LSD 41-2012 NEMA LSD 4-1999 NEMA LSD 43-2008 NEMA LSD 44-2009 NEMA LSD 45-2009 NEMA LSD 46-2009 NEMA LSD 48-2009 NEMA LSD 49-2010 NEMA LSD 51-2009 NEMA LSD 5-2009 NEMA LSD 53-2010 NEMA LSD 54-2010 NEMA LSD 55-2010 NEMA LSD 56-2011 NEMA LSD 58-2010 NEMA LSD 60-2012 NEMA LSD 61-2012 NEMA LSD 6-1999 NEMA LSD 62 NEMA LSD 63 NEMA LSD 64-2012 NEMA LSD 65-2012 NEMA LSD 66-2012 NEMA LSD 7-1999 (R2012) NEMA LSD 8-1999 NEMA LSD 9-2000 (R2011) NEMA LSD E11-2001 NEMA MG 10-2001 (R2007) NEMA MG 11-1977 (R1997, R2001, R2007, R2012) NEMA MG 1-2007 Condensed NEMA MG 2-2001 Revision 1-2007 NEMA MG 3-1974 (R1995, R2000, R2006) NEMA MGW 1-2013 NEMA MS 10-2010 NEMA MS 11-2010 NEMA MS 1-2008 NEMA MS 12-2010 NEMA MS 2-2008 NEMA MS 3-2008 NEMA MS 4-2010 NEMA MS 5-2009

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NEMA MS 6-2008 NEMA MS 7-1993 (Revision 1998) NEMA MS 8-2008 NEMA MS 9-2008 NEMA MW 700-1997 NEMA MW 750-2009 NEMA MW 755-1996 NEMA MW 760-1996 NEMA MW 765-2003 (R2008) NEMA MW 770-1997 (R1998) NEMA MW 780-2005 (R2011) NEMA MW 785-2000 (R2006, R2011) NEMA MW 790-2000 NEMA MW 800-1996 NEMA NS 1-2005 NEMA NU 1-2007 NEMA NU 2-2012 NEMA NU 3-2004 NEMA NU 4-2008 NEMA OS 3-2012 NEMA PB 1.1-2002 (Spanish) NEMA PB 1-2011 NEMA PB 2.1-2002 NEMA PB 2.2-1999 (R2004, R2009) NEMA PB 2-2011 NEMA PE 1-2003 NEMA PE 5-1997 (R2003) NEMA PE 7-1997 (R2003) NEMA PRP 2-2009 NEMA PRP 3-2009 NEMA PRP 4-2009 NEMA RE 2-1999 NEMA RN 1-2005 NEMA RN 2-1997 (R2009) NEMA RN 3-1991 (R2002) NEMA RV 1-2012 NEMA RV 2-2011 NEMA RV 3-2012 NEMA RV 4-2009 NEMA SB 10-1991 (R1998, R2005, R2010) NEMA SB 11-2011 NEMA SB 1-2001 NEMA SB 13-2012

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NEMA SB 19-(R2007) NEMA SB 2-2010 NEMA SB 28-1992 (R1997, R2003) NEMA SB 29-1994 NEMA SB 30-2005 NEMA SB 3-1969 (R1989, R1994) NEMA SB 50-2008 NEMA SB 7-2011 NEMA SBP 1-2010 NEMA SG 10-2008 NEMA SG 11-2008 NEMA SG 4-2009 (R2013) NEMA SG 5-1995 NEMA SG 6-2000 NEMA SG-AMI 1-2009 NEMA SM 23-1991 (R1997, R2002) NEMA SM 24-1991 (R1997, R2002) NEMA SSL 1-2010 NEMA SSL 3-2011 NEMA SSL 4-2012 NEMA SSL 6-2010 NEMA SSL 7A-2013 NEMA ST 20-1992 (R1997) NEMA TC 13-2005 NEMA TC 14-2002 NEMA TC 18-2004 NEMA TC 19-2001 (R2009) NEMA TC 2-2003 NEMA TC 3-2004 NEMA TC 6 & 8-2003 NEMA TC 7-2013 NEMA TC 9-2004 NEMA TCB 2-2000 NEMA TCB 3-2001 (R2009) NEMA TF 1-1993 (R2000, R2005) NEMA TF 2-1993 (R2000, R2005) NEMA TP 1-2002 NEMA TP 2-2005 NEMA TP 3-2000 NEMA TR 1-1993 (R2000) NEMA TS 1-1989 (R1994, R2000, R2005) NEMA TS 2-2003 (R2008) NEMA TS 2-2003, Amendment 3 NEMA TS 2-2003, Amendment 4 NEMA TS 4-2010 NEMA UC 2-1993 (R2000, R2005, R2010)

NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA NTCIP NTCIP NTCIP NTCIP

NEMA UD 2-2004 (R2009) NEMA UD 3-2004 (R2009) NEMA VE 1-2009 NEMA VE 2-2006 NEMA WC 26/EEMAC 201-2008 NEMA WC 50-1976/ICEA P-53-426 Second Edition (R1993, R1999) NEMA WC 52-2005 NEMA WC 56-1986 (R1993, R2000, R2005, R2012) NEMA WC 58-2008/ICEA S-75-381 NEMA WC 60.2-1994 (R1999) NEMA WC 62-1992 (R1999, R2004) NEMA WC 63.1-2005 NEMA WC 65-1995 (R2003) NEMA WC 72-1999 (R2004) NEMA WC 73-2000 (R2005, R2012) NEMA WD 1-1999 (R2005, R2010) NEMA WD 7-2011 NEMA WD 9-2013 NEMA XR 10-1986 (R1992, R1998, R2003) NEMA XR 11-1993 (R1999) NEMA XR 13-1990 (R1995, R2000) NEMA XR 14-1990 (R1995, R2000) NEMA XR 15-1991 (R1996, R2001) NEMA XR 16-1991 (R1996, R2001) NEMA XR 17-1993 (R1999) NEMA XR 18-1993 (R1999) NEMA XR 19-1993 (R1999) NEMA XR 21-2000 NEMA XR 22-2006 NEMA XR 23-2006 NEMA XR 24-2008 NEMA XR 25-2010 NEMA XR 26-2012 NEMA XR 27-2012 NEMA XR 29-2013 NEMA XR 5-1992 (R1999) NEMA XR 7-1995 (R2000) NEMA XR 9-1984 (R1994, R2000) NTCIP 1101:1996 NTCIP 1102:2004 NTCIP 1103 v02 NTCIP 1104 v01

NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NTCIP NEMA NEMA NEMA NEMA NEMA NEMA NEMA NEMA

NTCIP 1201 v03 NTCIP 1202:2005 NTCIP 1203:2011 NTCIP 1204 v02 NTCIP 1205:2001 NTCIP 1206:2005 NTCIP 1207:2007 NTCIP 1208:2005 NTCIP 1209:2011 NTCIP 1211 v01 NTCIP 1213 v02 NTCIP 1400:2000 NTCIP 1401:2000 NTCIP 1402:2000 NTCIP 1403:2000 NTCIP 1404:2000 NTCIP 1405:2000 NTCIP 1406:2000 NTCIP 1407:2000 NTCIP 1408:2001 NTCIP 2001:1996 NTCIP 2101:2001 NTCIP 2102:2003 NTCIP 2103 v02 NTCIP 2104:2003 NTCIP 2201:2003 NTCIP 2202:2001 NTCIP 2301 v02 NTCIP 2302:2001 NTCIP 2303:2001 NTCIP 2304:2002 NTCIP 2306 v01 NTCIP 8003:2001 NTCIP 8004 v02 NTCIP 8005 v01 NTCIP 8007 v01 NTCIP 9001 v04 NEMA PP 1-1986 (R1996) NEMA PS 3.13-2001 PS 3.9-2000 NEMA ST 1-1988 (R1994, R1997) NEMA WC 2-1980 (R1991, R1998)/ICEA S-67-401 5th Edition NEMA WC 3-1992 NEMA WC 4-1988/ICEA S-65-375 3rd Ed. (R1993) NEMA WC 5-1992

NEMA NEMA NEMA

NEMA WC 60.1-1995 NEMA WC 7-1988 NEMA WC 8-1988

National Electrical Manufacturers Association American National Standards Institute International Electrotechnical Commission National Transportation Communications for Intelligent Transportation Systems (ITS) Protocol American National Standard Lighting Group Healthcare Information and Management Systems Society

Title Electric connectors-Sealed insulated underground connector systems rated 600V Electric connectors-connector for use B/N AL-to-AL and Al-to-Cu conductors designed for normal operation at or below 93 0C and Cu-to-Cu Electric connectors-Insulation-piercing connector system, rated 600V or Less (Low voltage aerial bundled cables and insulated and non insulated line wires Electric connectors-Non-sealed, multiport connector systems rated 600V or less for Al and Cu conductors Physical aspects of watt-hour meters-Safety Standard Instrument Transformers for revenue metering, 10kV BIL through 350kV BIL (0.6kV NSV through 69kV NSV) Electric Meters-Code of Electricity Metering Protocol Specification for ANSI Type 2 Optical Port Utility Industry end device data tables Electricity Meters-0.2 & 0.5 Accuracy Classes Protocol Specification for Telephone Modem Communication Protocol Specification for Interfacing of data Communication networks Registers, Mechanical Demand Thermal demand meters Phase-Shifting devices used in metering, marking and arrangement of Terminals Requirements for watt-hour sockets Test blocks and cabinets for installation of self-contained A-base watt-hour meters Test switches for transformer-Rated Meters Roadway and area lighting equipment-Locking type photocontrol devices and mating receptacles-Physical and Electrical interchangeability and testing Roadway and area lighting equipment-Multiple Sockets Roadway and area lighting equipment-Filament Lamps-A guide for selection Roadway and area lighting equipment-Mercury Lamps-A guide for selection Roadway and area lighting equipment-Metal Brackets for wood poles Roadway and area lighting equipment-Elliptically shaped, enclosed side mounted luminaires for horizontal burning High Intensity Discharge (HID) Lamps Roadway and area lighting equipment-Luminaire field identification Roadway and area lighting equipment-Enclosed, post top-mounted Luminaires Roadway and area lighting equipment-Enclosed side-mounted Luminaires for horizontal burning high intensity discharge lamps-Mechanical interchangeability of refractors Roadway and area lighting equipment-High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps Roadway and area lighting equipment-High-Pressure Sodium (HPS) and Retrofit HPS Lamps for Mercury Ballasts-Guide for Selection Roadway and area lighting equipment-Fiber-Reinforced Composite (FRC) Lighting Poles Roadway and area lighting equipment-Vertical Tenons Used with Post Top-Mounted Luminaires Roadway and area lighting equipment-Luminaire Voltage Classification

Roadway and area lighting equipment-Internal Labeling of Luminaires Roadway and area lighting equipment-Enclosed Architectural Luminaires Roadway and area lighting equipment-Non-Locking (Button)-Type Photocontrols Roadway and area lighting equipment-Ingress Protection (Resistance to Dust, Solid Objects and Moisture) for Luminaire Enclosures Roadway and area lighting equipment-Troubleshooting Guide for High-Intensity Discharge (HID) Luminaires Roadway and area lighting equipment-Tunnel Lighting and Underpass Luminaires Roadway and area lighting equipment-Glass Lenses Used in Luminaires Roadway and area lighting equipment-Metal Halide Lamps-Guide for Selection Roadway and area lighting equipment-Luminaire Vibration Roadway and area lighting equipment-Luminaire Attachments Roadway and area lighting equipment-Enclosed Setback Luminaires and Directional Floodlights for High-Intensity Discharge (HID) Lamps Roadway and area lighting equipment-Plug-In Type Receptacle and Plug for High-Intensity Discharge (HID) Ignitors Roadway and area lighting equipment-Vandal Shields for Roadway and Area Lighting Luminaires Roadway and area lighting equipment-Luminaire Electrical Ancillary Devices (LEAD) Roadway and area lighting equipment-Aluminum Lighting Poles Roadway and area lighting equipment-Concrete Lighting Poles Roadway and area lighting equipment-Steel Roadway and Area Lighting Poles Solid State Light Sources Used in Roadway and Area Lighting Roadway and area lighting equipment-Induction Lighting Roadway and area lighting equipment-Solar Lighting Systems Roadway and area lighting equipment-Series Sockets and Series-Socket Receptacles Roadway and area lighting equipment-Film Cutouts Roadway and area lighting equipment-Metal Heads and Reflector Assemblies-Mechanical and Optical Interchangeability Roadway and area lighting equipment-Socket Support Assemblies for Metal Heads-Mechanical Interchangeability Portable Primary Cells and Batteries with Aqueous Electrolyte-General and Specifications Portable Primary Cells and Batteries with Aqueous Electrolyte-Safety Standard Portable Rechargeable Cells and Batteries-General and Specifications Portable Rechargeable Cells and Batteries-Safety Standard Portable Lithium Primary Cells and Batteries-General and Specifications Portable Lithium Primary Cells and Batteries-Safety Standard Insulators-Composite-Line Post Type Insulators-Composite-Distribution Line Post Type Wet-Process Porcelain Insulators Spool Type Switchgear-Low Voltage AC Power Circuit Breakers Used in Enclosures-Test Procedures Switchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test Procedures Switchgear-Metal-Enclosed Low Voltage AC Power Circuit Breaker Switchgear Assemblies-Conformance Test ProceduresAmendment 1: Short-Time Withstand Current Tests Test Procedures for Low-Voltage AC Power Circuit Protectors Used in Enclosures Indoor AC High Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear-Conformance Test Procedures Switchgear-Medium Voltage Metal-Clad Assemblies-Conformance Test Procedures Switchgear-Metal-Enclosed Interrupter Switchgear Assemblies-Conformance Testing Switchgear-Indoor AC Medium Voltage Switches for Use in Metal-Enclosed Switchgear-Conformance Test Procedures AC High Voltage Power Vacuum Interrupters-Safety Requirements for X-Radiation Limits Gas Tube Surge Arresters on Wire Line Telephone Circuits 450W Self-Ballasted Mercury Lamps

750-Watt, 120-Volt Self-Ballasted Mercury Lamps 160-Watt, 120-Volt B87 Self-Ballasted Mercury Halide Lamps 70-Watt, M98 Single-Ended Metal Halide Lamps 50-Watt, M110 Single-Ended Metal-Halide Lamps 400-Watt, M59 Single-Ended Metal Halide Lamps 1000-Watt, M47 Single-Ended Metal Halide Lamps 175-Watt, M57 Single-Ended Metal Halide Lamps 250-Watt, M58 Single-Ended Metal Halide Lamps 1500-Watt, M48 Single-Ended Metal-Halide Lamps Electric Lamps-250 Watt, 120 Volt, Self-Ballasted Mercury Lamps Specifications American National Standard for Electric Lamps-70 W, M85 Double-Ended Metal Halide Lamps 100-Watt, M90 Single-Ended Metal Halide Lamps 150-Watt, M102 Single-Ended Metal-Halide Lamps Electric Lamps-Dimensions for Projection Lamps-Double-Contact, Medium-Ring, Base-Up Type Electric Lamps-Four-Pin, Prefocus, Base-Down Type Lamps-Tungsten Halogen (TH) Lamps with G6.35, GX6.35 and GY6.35 Bases DNF Projection Lamps Electric Lamps-P28 Single-Contact Medium Prefocus-Based Projection Lamps for Base-Down Operation-Dimensions Electric Lamps-Condenser-Reflector, Four-Pin Prefocus-Base Projection Lamps-Dimensions Electric Lamps-CBA Projection Lamp EJL Projection Lamp ELB Projection Lamp ELC Projection Lamp EMM Projection Lamp Dimensions and Centering Systems for Projection Lamps-51 mm (2 in.) Integral Reflector, Rim Reference Lamps with GX5.3, GY5.3 and GU5.3 Bases DDM Projection Lamp DED Projection Lamp 1.65 in. (42 mm) Integral Reflector, Rim Reference Projection Lamps with GX5.3 or GY5.3 Bases-Dimensions and Centering Systems EYB Projection Lamp EML Projection Lamp Microfilm Projection Lamps-2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 Bases Dimensions and Centering Systems for Projection Lamps-35 mm Integral Reflector, Rim Reference Lamps with GZ4 Bases Slide Projector Lamps-Condensing, Dichroic, 1.65 in. (42 mm), Integral Reflector, Rim Reference Tungsten Halogen Lamps with GX5.3 Bases Electric Lamps-Slide Projector Lamps, Condensing, Dichroic, 2 in. (51 mm), Integral Reflector, Rim Reference Tungsten Halogen Lamps with GY5.3 Bases Tungsten Halogen (TH) Lamps with GZ9.5 Two-Pin, Prefocus Bases and 36.5 mm Nominal Light Center Length 2 in. (51 mm) Dichroic Coated Integral Reflector, Rim Reference Tungsten Halogen (TH) Large-Screen Projection Lamps with GX5.3 Bases Condensing Dichroic Coated Integral Reflector Side-Pin Tungsten Halogen (TH) Projection Lamps with GX7.9 Bases Projection Lamps-Tungsten Halogen Lamps with G5.3 Bases Projection Lamps, Incandescent-Method for Life Testing Electric Lamps-Use of Protective Shields with Tungsten Halogen (TH) Lamps-Cautionary Notice Electric Lamps-Projection Lamps-Vocabulary Electric Lamps-Single-Ended Tungsten Halogen (TH) Lamps with GZ9.5 Base, T6 Bulb, 36.5 mm Light Center Length (LCL), 76.2 mm MOL with Proximity Reflector

Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 89 mm (3½ in.) Tungsten Halogen (TH) Lamps with a Light Center Length (LCL) of 63.5 mm (2½ in.) Tungsten Halogen (TH) Lamps with G9.5 Bases and 60.5 mm Light Center Length (LCL) Tungsten Halogen (TH) Lamps with P28 Bases and 55.5 mm Light Center Length (LCL) Tungsten Halogen (TH) Lamps with G38 Bases and 127 mm Light Center Length (LCL) Electric Lamps-Specifications for Fluorescent Lamp Starters Electric Lamps-A, G, PS and Similar Shapes with E26 Medium Screw Bases Electric Lamps-High-Pressure Sodium (HPS) Lamps Incandescent Lamps-A, G, PS and Similar Shapes with E39 Mogul Screw Bases Incandescent Lamps-Miscellaneous Types 2 in. (51 mm) Integral-Reflector Lamps with Front Covers and GU5.3 or GX5.3 Bases Tubular Tungsten Halogen (TH) Lamps-Physical Characteristics Specification for Tubular Incandescent Infrared Lamps Electric Lamps-Procedure for Use in Preparation of Lamp Space Drawings Electric Lamps-Amendments to ANSI C78.370-1997 and ANSI C78.390-1998 Method of Designation for Electric Lamps-Photographic, Stage and Studio Fluorescent Lamps-Guide for Electrical Measurements Specifications for the Chromaticity of Fluorescent Lamps Electric Lamps-Classification of the Beam Patterns of Reflector Lamps Mercury Lamps-Method of Measuring Characteristics Electric Lamps-High-Intensity Discharge (HID)-Methods of Measuring Characteristics Electric Lamps-Miniature and Sealed-Beam Incandescent Lamps-Method of Designation Electric Lamps-Characteristics of Miniature Lamps of T1 and T1¾ Shapes Electric Lamps-Specifications for Performance of Self-Ballasted Compact Fluorescent Lamps Nomenclature for Glass Bulbs Intended for Use with Electric Lamps Electric Rigid Steel Conduit (ERSC) Steel Electrical Metallic Tubing (EMT) Electrical Rigid Aluminum Conduit (ERAC) Intermediate Metal Conduit (EIMC) Lamp Ballasts-Line Frequency Fluorescent Lamp Ballasts Lamp Ballasts-Fluorescent Adapters Lamp Ballasts-Definitions-for Fluorescent Lamps and Ballasts Lamp Ballasts-Method of Measurement of Fluorescent Lamp Ballasts Reference Ballasts for Fluorescent Lamps Lamp Ballasts-Ballasts for High-Intensity Discharge and Low-Pressure Sodium (LPS) Lamps (Multiple-Supply Type) Lamp Ballasts-Ballasts for High-Intensity Discharge (HID) Lamps-Methods of Measurement Harmonic Emission Limits-Related Power Quality Requirements for Lighting Equipment Electric Power Systems and Equipment-Voltage Ratings (60 Hz) Safety Colors Environmental and Facility Safety Signs Standard Criteria for Safety Symbols Product Safety Signs and Labels Safety Tags and Barricade Tapes (for Temporary Hazards) Product Safety Information in Product Manuals, Instructions and Other Collateral Materials Color Chart Degrees of Protection Provided by Enclosures (IP Code) (Identical National Adoption) Arc-Welding Equipment-Part 11: Electrode Holders

Arc-Welding Equipment-Part 1: Welding Power Sources Arc-Welding Equipment-Part 12: Coupling Devices for Welding Cables Arc-Welding Equipment-Part 2: Liquid Cooling Systems Arc-Welding Equipment-Part 3: Arc Striking and Stabilizing Devices Arc-Welding Equipment-Part 5: Wire Feeders Arc-Welding Equipment-Part 7: Torches Arc-Welding Equipment-Part 8: Gas Consoles for Welding and Plasma Cutting Systems Environmentally Conscious Design for Electrical and Electronic Products Electric Lamps-Standard Method of Measuring the Pinch Temperature of Quartz Tungsten-Halogen Lamps Electric Lamps-Single-Based Fluorescent Lamps-Dimensional and Electrical Characteristics Guidelines and General Information for Electrical Lamp Bases, Lampholders and Gauges Molded-Case Circuit Breakers and Their Application Guidelines for Inspection and Preventive Maintenance of Molded-Case Circuit Breakers Used in Commercial and Industrial Applications Wet-Process Porcelain Insulators-Indoor Apparatus Type Composite Insulators-Tests​ Methods Electrical Power Insulators-Test Methods Insulators-Composite-Suspension Type Insulators-Composite-Distribution Deadend Type Insulators-Wet-Process Porcelain and Toughened Glass-Suspension Type Wet-Process Porcelain Insulators-Strain Type Wet-Process Porcelain Insulators-Low and Medium Voltage Types Wet-Process Porcelain Insulators-High Voltage Pin Type Wet-Process Porcelain Insulators-High Voltage Line-Post Type Wet-Process Porcelain Insulators-Apparatus, Cap and Pin Type Wet-Process Porcelain Insulators-Apparatus, Post Type Polyphase Induction Motors for Power Generation Stations Procedures for Fluorescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP) Procedures for High-Intensity Discharge (HID) Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP) Procedures for Incandescent Lamp Sample Preparation and the Toxicity Characteristic Leaching Procedure (TCLP) Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVTs) Electric Power Connectors for Substations Plugs, Receptacles and Connectors of the Pin-and-Sleeve Type for Hazardous Locations Fittings, Cast Metal Boxes and Conduit Bodies for Conduit, Electrical Metallic Tubing (EMT) and Cable Manufactured Electrical Mica Calendered Aramid Papers Used for Electrical Insulation Flashlight Basic Performance Standard Grounding Rod Electrodes and Grounding Rod Electrode Couplings Electrical and Electronic Polytetrafluoroethylene (PTFE) Insulated High-Temperature Hook-Up Wire, Types ET (250 V), E (600 V) and EE (1,000 V) Electrical and Electronic Fluorinated Ethylene Propylene (FEP) Insulated High-Temperature Hook-Up Wire, Types KT (250 V), K (600 V) and KK (1,000 V) Electrical and Electronic Cross-Linked, Modified Low-Smoke Polyolefin (XLPO) Insulated Hook-Up Wire, Types LS (rated 105°C; 600 V), ZHDM (rated 90°C; 600 V), ZHDH (rated 90°C; 600 V), ZH (rated 125°C; 600 V), and ZHX (rated 125°C; 1000 V) Application Guide for Industrial Control and Systems Crane and Hoist Controllers Distribution Equipment Switch Application Guide, A User's Reference High-Pressure Decorative Laminates (HPDL) Motors and Generators

Magnet Wire Sheet-Steel Outlet Boxes, Device Boxes, Covers and Box Supports Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 V or Less Communications Systems for Life Safety in Schools Smart Grid Interoperable & Conformant (SG-IC) Testing and Certification Scheme Operator Guidelines Standard for Aerospace and Industrial Electrical Cable Ampacities of Cables Installed in Cable Trays Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation and Portable Cables for Test Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation and Portable Cables for Test Standard for Control, Thermocouple Extension and Instrumentation Cables Transfer Impedance Testing Performance Standard for Coaxial Premise Data Communications Cables Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables Standard for Uninsulated Conductors Used in Electrical and Electronic Applications Power Cables Rated 2,000 V or Less for the Distribution of Electrical Energy Standard for Non-Shielded Cables Rated 2,001-5,000 V for Use in the Distribution of Electric Energy 5-46 kV Shielded Power Cable for Use in the Transmission and Distribution of Electric Energy Wiring Devices-Dimensional Specifications American National Standard Electric Lamps: PAR and R Shapes For Incandescent Lamps: Tungsten Halogen Lamps (Non-Vehicle) Electric Lamps-Specifications for the Chromaticity of Solid State Lighting (SSL) Products Electric Lamps-High-Intensity Discharge (HID)-Method of Designation Electric Lamps: Specifications for Mercury Lamps Electric Lamps-Guidelines for Low-Pressure Sodium (LPS) Lamps Electric Lamps-Single-Ended Metal Halide Lamps Electric Lamps-Double-Ended Metal Halide Lamps Electric Lamps-Self-Ballasted Mercury Lamps Electric Lamps-Incandescent Lamps-Safety Specifications, Part 1: Tungsten Filament Lamps for Domestic and Similar General Lighting Purposes Electric Lamps-Safety Specifications, Part 2: Tungsten Halogen (TH) Lamps for Domestic and Similar General Lighting Purposes Electric Lamps-Incandescent Lamps-Safety Specifications, Part 3: Tungsten Halogen (TH) Lamps (Non-Vehicle) Electric Lamps-Double-Capped Fluorescent Lamps-Dimensional and Electrical Characteristics Electrical Lamp Bases-Specifications for Bases (Caps) for Electric Lamps Electric Lampholders Gauges for Electric Lamp Bases and Lampholders Lamp Ballasts-High Frequency Fluorescent Lamp Ballasts Lamp Ballasts-Low-Frequency Square Wave Electronic Ballasts-for Metal Halide Lamps Lamp Ballasts-High-Intensity Discharge (HID) and Low-Pressure Sodium (LPS) Lamps-Definitions Manufacturer Disclosure Statement for Medical Device Security Methods of Measurement of Radio Influence Voltage (RIV) of High Voltage Apparatus Enclosures for Electrical Equipment (1,000 V Maximum) Safety Labels for Pad-Mounted Switchgear and Transformers Sited in Public Areas Performance Testing for Lighting Controls and Switching Devices with Electronic Drivers and Discharge Ballasts

User Guide to Product Specifications for Metal Electrical Conduit and Tubing Molded-Case Circuit Breakers, Molded Case Switches, and Circuit-Breaker Enclosures Establishing Levels of Selective Coordination for Low Voltage Circuit Breakers Selective Coordination Recommendations on AFCI / Home Electrical Product Compatibility Fluorescent Ballast Connector Energy Efficiency for Electronic Ballasts for T8 Fluorescent Lamps Busways Instrucciones Generales para el Manejo, Instalacion, Operacion y Mantenimiento de Electroductos Hasta 600 V Nominales o Menos General Instructions for Handling, Installation, Operation and Maintenance of Busway Rated 600 V or Less Application Information for Busway Rated 600 V or Less NEMA Technical Report Definitions for Calculations of VA, VAh, VAR, and VARh for Poly-Phase Electricity Meters Brushes for Electrical Machines Manufactured Graphite/Carbon Electrodes Powdered Graphite Torquing Devices for Electrodes-Selection Through Disposal Shunt Capacitors Residential Controls-Temperature Limit Controls for Electric Baseboard Heaters Residential Controls-Hot Water Immersion Controls Residential Controls-Line Voltage Integrally Mounted Thermostats for Electric Heaters Residential Controls-Class 2 Transformers Quick-Connect Terminals Energy-Efficiency Requirements for Programmable Thermostats Residential Controls-Electrical Wall-Mounted Room Thermostats Residential Controls-Surface-Type Controls for Electric Storage Water Heaters Instrument Transformers for Revenue Metering (110 kV BIL and Less) Instrument Transformers for Revenue Metering (125 kV BIL through 350 kV BIL) Exit Sign Visibility Testing Requirements for Safety and Energy Efficiency Electric Arc-Welding Power Sources Semi-Automatic Wire-Feed Systems for Arc Welding Graphic Symbols for Arc-Welding and Cutting Apparatus Guidelines for Precautionary Labeling for Arc-Welding and Cutting Products Arc Welding Power Sources–Energy Consumption Testing and Labeling Selection and Installation Guidelines for Fittings for Use with Non-Flexible Electrical Metal Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit and Electrical Metallic Tubing) Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and Cable Fiberglass Cable Tray Systems Untreated Mica Paper Used for Electrical Insulation Low Voltage Cartridge Fuses High-Temperature Instrumentation and Control Cables Electrical and Electronic Crosslinked, Modified Polyethylene (XLPE) Insulated 125°C Hook-Up Wire, Types L (600 V), LL (1,000 V) and LX (3,000 V) Electrical and Electronic Silicone and Silicone-Braided Insulated Hook-Up Wire Types S (600 V), ZHS (600 V), SS (1,000 V), ZHSS (1,000 V) and SSB Braided (1,000 V)

Electrical and Electronic PVC, PVC/Nylon, and PE/Nylon 105ºC Hook-Up Wire, Types B, C, D, BN, CN, and DN (600, 1000, and 3000 V), and Types J and JN 75ºC (600V) Application Guide for Ceramic Suspension Insulators Programmable Controllers (PLC), Part 1: General Information Programmable Controllers (PLC), Part 2: Equipment Requirements and Test Programmable Controllers (PLC), Part 3: Programming Languages Programmable Controllers (PLC), Part 4: User Guidelines Programmable Controllers (PLC), Part 5: Communications Programmable Controllers (PLC), Part 7: Fuzzy Control Programming Programmable Controllers (PLC), Part 8: Guidelines for the Application and Implementation of Programming Languages Safety Guidelines for the Application, Installation and Maintenance of Solid State Control Preventive Maintenance of Industrial Control and Systems Equipment Part 1: Electromechanical AC Transfer Switch Equipment AC Transfer Equipment, Part 2: Static AC Transfer Equipment Safety Bulletin: NEMA Safety Considerations for Residential Transfer Equipment and Residential Transfer Switches Industrial Control and Systems: Profiles of Networked Industrial Devices-Part 1: General Rules Industrial Control and Systems: General Requirements Application Guide for Electric Fire Pump Controllers Instructions for the Handling, Installation, Operation, and Maintenance of Medium Voltage Electric Fire Pump Controllers Rated Not More Than 7200V Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600 V Motion/Position Control Motors, Controls and Feedback Devices Motor Control Centers Diagrams, Device Designations and Symbols Instructions for the Handling, Installation, Operation and Maintenance of Motor Control Centers Rated Not More Than 600 V NEMA and IEC Devices for Motor Service-A Guide for Understanding the Differences Informational Guide to Electrical Industrial Topics Controllers, Contactors and Overload Relays Rated Not More Than 2,000 V AC or 750 V DC, Part 8: Disconnect Devices for Use in Industrial Control Equipment Controllers, Contactors and Overload Relays Rated 600 V AC Vacuum-Break Magnetic Controllers Rated 1,500 V AC Guide for the Application, Handling, Storage, Installation and Maintenance of Medium Voltage AC Contactors, Controllers and Control Centers Medium Voltage Controllers Rated 2,001 to 7,200 V AC Application Guideline for Terminal Blocks Typical Proximity Switch Specifications Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields High-Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices Control Circuit and Pilot Devices Adjustable Speed Electrical Power Drive Systems, Part 1: General Requirements-Rating Specifications for Low Voltage Adjustable-Speed DC Power Drive Systems Adjustable Speed Electrical Power Drive Systems, Part 2: General Requirements-Rating Specifications for Low Voltage Adjustable Frequency AC Power Drive Systems Adjustable Speed Electrical Power Drive Systems, Part 4: General Requirements-Rating Specifications for AC Power Drive Systems Above 1,000 V AC and Not Exceeding 35 kV Enclosures Safety Standards for Construction and Guide for Selection, Installation and Operation of Adjustable Speed Drive Systems

Adjustable Speed Drives Digital Imaging and Communications in Security Information Object Definitions (IODs) Enclosed and Miscellaneous Distribution Equipment Switches (600 V Maximum) Guidelines for Inspection and Preventive Maintenance of Switches Used in Commercial and Industrial Applications Surge Arresters Test Procedure for Compatibility of Hearing Aids and Ultrasonic Lighting Control Devices Performance, Application, Fabrication, and Installation of High Pressure Decorative Laminates Recessed Luminaires-Ceiling Compatibility Procedure for Determining Luminaire Efficacy Ratings for Fluorescent Luminaires Procedure for Determining Luminaire Efficacy Ratings for Commercial, Non-Residential Downlight Luminaires Procedure for Determining Luminaire Efficacy Ratings for High-Intensity Discharge (HID) Industrial Luminaires Procedure for Determining Target Efficacy Ratings (TER) for Commercial, Industrial and Residential Luminaires Industrial Laminated Thermosetting Products Relative Temperature Indices of Industrial Thermosetting Laminates Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLP Procedures for Pin-Based Compact Fluorescent Lamp Sample Preparation and the TCLP Procedures for High-intensity Discharge Lamp Sample Preparation and the TCLP Procedures for Incandescent Lamp Sample Preparation and the TCLP Procedure for U-shaped Fluorescent Lamp Sample Preparation and the TCLP Procedures for Integral Electronic Compact Fluorescent Lamp Sample Preparation and the TCLP Generic Designation System for Pin-Based Compact Fluorescent and T5 Twin Fluorescent Lamps Limits on Mercury Content in Self-Ballasted Compact Fluorescent Lamps Dimming of T8 Fluorescent Lighting Systems Low-Voltage Surge-Protection (LVSP) Devices A Guide for the Safe Use of Remote Illumination Systems Equipment, Including a Glossary of Definitions White Paper on Outdoor Lighting Issues and Quality Lighting Applications Tungsten Halogen (TH) Lamps (Bulbs): Ultraviolet, Rupture and High Temperature Risks Exit Sign Brightness for Visibility and Safety Guidelines on the Application of Dimming to High-Intensity Discharge Lamps Radioactive Substances in Compact Fluorescent Lamps Consumer Guide for 4-Ft Fluorescent Bulbs Compatibility of Fluorescent Lamps and Electronic Ballasts in Frequently Switched Applications End-of-life Operation of Small Diameter (5/8 in. Diameter or Less) Pin-Based Fluorescent Lamps Wiring Requirements for T8 Lamps with Instant-Start Ballasts Demand Reduction and Energy Savings Using Occupancy Sensors Recommended Practice-Lamp Seasoning for Fluorescent Dimming Systems Marking of Luminaire Codes on Metal Halide Lamps Best Practices for Metal Halide Lighting Systems, Plus Questions and Answers about Lamp Ruptures in Metal Halide Lighting Systems Best Practices for Operating Fluorescent Lighting Systems Incompatibility of T8 Ballasts (RS, PS, Dimming) and Shunted Bi-Pin Lampholders Application Note: Wiring Requirements for T8 Fluorescent Lamps with Instant-Start Ballasts Application Note: Wiring Requirements for 2G11 Based T5 Fluorescent Twin Lamps With Instant-Start Ballasts A Lighting Systems Division Information Bulletin: Changes to the 2005 NEC Will Impact Future Metal Halide Systems Options Interaction of Infrared Controls and Electronic Compact Fluorescent Lamps Recommended Practices for T8 Rapid-Start Fluorescent Lamp Dimming (17 W, 25 W, 32 W and 40 W Lamps) ANSI Code Update to Include Letter C for Ceramic Metal Halide Lamps

Effects of EPAct 2005 on Mercury Vapor (MV) Lamp Ballasts and Lighting Systems-Frequently Asked Questions Four-Pin Spiral Compact Fluorescent Lamp Systems Issues, Recommendations and Standardization Failure Modes for Self-Ballasted Compact Fluorescent Lamps (SBCFLs)-A NEMA Update UN2911 Labeling and Transportation of Lamps Containing Radioactive Substances Glossary of Terms Pertaining to Remote Illumination Systems Luminaire Ballast Disconnects Solid State Lighting-The Need for a New Generation of Sockets and Interconnects Recommendations for Solid State Lighting Sub-Assembly Interfaces for Luminaires Photoluminescent Exit Signage-Factual Review Lead in Household Lamps Solid State Lighting for Incandescent Replacement-Best Practices for Dimming Solid State Lighting-Definitions for Functional and Decorative Applications 34 W Fluorescent Lamps and High-Frequency Electronic Ballasts Proposal for Digital Protocol for Lighting Control Devices The Strengths and Potentials of Metal Halide Lighting Systems Outdoor Lighting and Human/Animal Factors: An Industry Opinion Compatibility of Forward Phase Control Dimmers and Dimmable Self-Ballasted Compact Fluorescent Lamps and Frequently Asked Questions Regarding CFLs and Dimming Air Infiltration Ratings for Recessed Luminaires The Effects of Dimming on Color and Efficacy of LED Lamps Fluorescent Dimming Standards Development Report Interaction of Infrared Controls and Fluorescent Lamp/Ballast Systems in Education Facilities Systems Approach for Lighting Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and Systems Lighting Controls Terminology NEMA Guide to Emergency Lighting Understanding the New Fluorescent Ballast Rule EPCA 10 CFR 430 Ultraviolet Radiation (UV) from Fluorescent Lamps Compact Fluorescent Lamps in Residences-Power Quality Implications Compatibility of Add-on Tube Guards with T8 Fluorescent Lamps Operating on High-Frequency Electronic Ballasts Fluorescent Lamps and the Environment Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel-Cage Polyphase Induction Motors Energy Management Guide for Selection and Use of Single-Phase Motors Information Guide for General Purpose Industrial AC Small and Medium Squirrel-Cage Induction Motor Standards Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators Sound Level Prediction for Installed Rotating Electrical Machines The U.S. Department of Energy Small Electric Motor Standards Final Rule and Technical Support Document of March 9, 2010 Determination of Local Specific Absorption Rate (SAR) in Diagnostic Magnetic Resonance Imaging (MRI) Determination of Gradient-Induced Electric Fields in Diagnostic Magnetic Resonance Imaging Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Imaging Quantification and Mapping of Geometric Distortion for Special Applications Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images Determination of Image Uniformity in Diagnostic Magnetic Resonance Images Acoustic Noise Measurement Procedure for Diagnostic Magnetic Resonance Imaging (MRI) Devices Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging

Determination of Signal-to-Noise Ratio and Image Uniformity for Single-Channel, Non-Volume Coils in Diagnostic Magnetic Resonance Imaging (MRI) Measurement Procedure for Time Varying Gradient Fields (dB/dt) for Magnetic Resonance Imaging Systems Characterization of the Specific Absorption Rate (SAR) for Magnetic Resonance Imaging Systems Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images (MRI) Test Procedures for Magnet Wire Plastic Spools/Reels Dynamic Coefficient of Friction of Film-Insulated Magnet Wire Straight Flange Magnet Wire Plastic Spools/Reels Tapered Flange Magnet Wire Plastic Spools/Reels Reclaiming of Magnet Wire Packaging Unified Customer Labeling for Magnet Wire Products Returnable Packaging for 24x6 Magnet Wire Reels Simulated Insertion Force Test for Film-Insulated Round Magnet Wire AC Overload Test for Film Insulated Magnet Wire Guidelines for Precautionary Labeling of Magnet Wire Guide for Preparation of NEMA Standards Publications Performance Measurements of Gamma Cameras Performance Measurements of Positron Emission Tomographs (PETs) Performance Measurements and Quality Control Guidelines for Non-Imaging Intraoperative Gamma Probes Performance Measurements of Small Animal Positron Emission Tomographs (PETs) Selection and Installation Guidelines for Electrical Outlet Boxes General Instructions for Proper Installation, Operation and Maintenance of Panelboards Rated 600 V or Less Panelboards General Instructions for Proper Handling, Installation, Operation and Maintenance of Deadfront Distribution Switchboards Rated 600 V or Less Application Guide for Ground-Fault Protective (GFP) Devices for Equipment Deadfront Distribution Switchboards Uninterruptible Power Systems (UPS)-Specification and Performance Verification Utility-Type Battery Chargers Communications-Type Battery Chargers Solvent-Cementing Joints for PVC Rigid Nonmetallic Conduit, Duct and Fittings Expansion Epoxy-Based Fittings for RTRC Rigid Nonmetallic Conduit Expansion Fittings for Polyvinyl Chloride (PVC) Rigid Nonmetallic Conduit Electrical Insulating Varnish Polyvinyl Chloride (PVC) Externally Coated Galvanized Rigid Steel Conduit and Intermediate Metal Conduit Packaging of Master Bundles for Electrical Rigid Metal Conduit (ERMC)-Steel, Electrical Intermediate Metal Conduit (EIMC)Steel, and Electrical Metallic Tubing (EMT)-Steel Product Identification Numbers for Metallic Tubular Conduit Products for Use with Bar Coding and Electric Data Interchange (EDI) Applications Application and Installation Guidelines for Armored Cable (AC) and Metal-Clad (MC) Cable Application and Installation Guidelines for Nonmetallic-Sheathed (NM-B) Cable and Underground Feeder and Branch Circuit (UF-B) Cable Application and Installation Guidelines for Flexible and Liquidtight Flexible Metal and Nonmetallic Conduits Application Guidelines for Service-Entrance Cable Audio Standard for Nurse Call Systems Guide for Proper Use of System Smoke Detectors Quality Informational Guide for Automatic Fire Detection and Alarm Systems Guide for Proper Use of Smoke Detectors in Duct Applications

NEMA Installation Guide for Nurse Call Systems (R2007) Training Manual on Fire Alarm Systems Product Safety Guide for Developing Documentation for Fire Alarm Systems and Equipment Impact of Electrostatic Discharges in the Hospital Environment Fire Service Annunciator and Interface Interconnection Circuitry of Noncoded Remote Station Protective Signaling Systems Emergency Communications Audio Intelligibility Applications Guide Applications Guide for Carbon Monoxide Alarms and Detectors Looking Ahead to UL 2560 Guide to OSHA and NFPA 70E Safety Regulations when Servicing and Maintaining Medium Voltage Switchgear and Circuit Breakers Rated Above 1,000 V Guide for Handling and Maintenance of AC Outdoor High Voltage Circuit Breakers Alternating Current High Voltage Circuit Breakers Power Switchgear Assemblies Power Switching Equipment Requirements for Smart Meter Upgradeability Steam Turbines for Mechanical Drive Service Land-Based Steam Turbine Generator Sets 0 to 33,000 kW Electronic Drivers for LED Devices, Arrays or Systems High-Power White LED Binning for General Illumination Retrofit Lamps: Minimum Performance Requirements Solid State Lighting for Incandescent Replacement-Dimming Phase Cut Dimming for Solid State Lighting: Basic Compatibility Dry Type Transformers for General Applications Electrical Nonmetallic Tubing (ENT) Reinforced Thermosetting Resin Conduit (RTRC) and Fittings Packaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) Conduit Nonmetallic Riser U-Type Guards Electrical Polyvinyl Chloride (PVC) Tubing and Conduit Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing Polyvinyl Chloride (PVC) Plastic Utilities for Underground Installations Smooth Wall Coilable Electrical Polyethylene Conduit Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installation NEMA Guidelines for the Selection and Installation of Underground Nonmetallic Duct User's Manual for the Installation of Underground Corrugated Coilable Plastic Utility Duct (CCD) Coated Electrical Sleeving Uncoated Treated Fiberglass Sleeving Guide for Determining Energy Efficiency for Distribution Transformers Standard Test Method for Measuring the Energy Consumption of Distribution Transformers Standard for the Labeling of Distribution Transformer Efficiency Transformers, Regulators and Reactors Traffic Control Systems (Not Recommended for New Designs) Traffic Controller Assemblies with NTCIP Requirements-Version 02.06 Contactor Amendment Flashing Yellow Arrow (FYA) Amendment Hardware Standards for Dynamic Message Signs (DMS) with NTCIP Requirements Undercarpet Power Distribution Systems

Acoustic Output Measurement Standard for Diagnostic Ultrasound Equipment, Revision 3 Standard for Real-Time Display of Thermal and Mechanical Acoustic Output Indices on Diagnostic Ultrasound Equipment, Revision 2 Metal Cable Tray Systems Cable Tray Installation Guidelines Binational Wire and Cable Packaging Standard Ampacities, Including Effect of Shield Losses for Single-Conductor Solid Dielectric Power Cable 15 kV through 69 kV High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing 3.0 kHz Insulation Continuity Proof Testing of Wire and Cable Portable and Power Feeder Cables for Use in Mines and Similar Applications Product Identification and Bar Coding Requirements for Building Wire Products Repeated Spark/Impulse Dielectric Testing Performance Standard for Twisted Pair Premise Voice and Data Communications Cables A Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel-Coated Stranded Conductors in HighPerformance Wire and Cable Applications Continuity of Coating Testing for Electrical Conductors Wire Selection Guidelines for Wires Rated at 200° to 450°C General Color Requirements for Wiring Devices Occupancy Motion Sensors Standard Dimmers, Photoelectric Controls, Presence Sensors, and Multi-outlet Bars Energy Consumption Testing and Labeling Measurement of the Maximum Symmetrical Radiation Field from a Rotating Anode X-Ray Tube Used for Medical Diagnosis Test Standard for the Determination of the Limiting Spatial Resolution of X-Ray Image Intensifier Systems Mechanical Safety Standard for Power Driven Motions of Electromedical Equipment Recommended Practices for Load-Bearing Mechanical Assemblies Used in Diagnostic Imaging Test Standard for the Determination of the Visible Entrance Field Size of an X-Ray Image Intensifier (XRII) System Test Standard for the Determination of the System Contrast Ratio (SCR) and the System Veiling Glare Index (SVGI) of an X-Ray Image Intensifier (XRII) System Test Standard for the Measurement of the Image Signal Uniformity of an X-Ray Image Intensifier (XRII) System Test Standard for the Determination of the Radial Image Distortion of an X-Ray Image Intensifier (XRII) System Electrical, Thermal and Loading Characteristics of X-Ray Tubes Used for Medical Diagnosis Characteristics of and Test Procedures for a Phantom to Benchmark Cardiac Fluoroscopic and Photographic Performance Quality Control Manual Template for Manufacturers of Displays and Workstations Labeled for Final Interpretation in FullField Digital Mammography (FFDM) Quality Control Manual Template for Manufacturers of Hardcopy Output Devices Labeled for Final Interpretation in Full-Field Digital Mammography (FFDM) Primary User Controls for Interventional Angiography X-Ray Equipment Computed Tomography Dose Check Access Controls for Computed Tomography: Identification, Interlocks, and Logs X-ray Equipment for Interventional Procedures User Quality Control Mode Standard Attributes on CT Equipment Related to Dose Optimization and Management Measurement of Dimensions and Properties of Focal Spots of Diagnostic X-Ray Tubes High Voltage X-Ray Cable Assemblies and Receptacles Power Supply Guidelines for X-Ray Machines Simple Transportation Management Framework Octet Encoding Rules (OER) Base Protocol Transportation Management Protocols (TMP) Center-to-Center Naming Convention Specification

Global Object (GO) Definitions Object Definitions for Actuated Traffic Signal Controller (ASC) Units-Version 02 Object Definitions for Dynamic Message Signs (DMS) Object Definitions for Environmental Sensor Station (ESS) Object Definitions for Closed-Circuit Television (CCTV) Camera Control Object Definitions for Data Collection and Monitoring (DCM) Devices Object Definitions for Ramp Meter Control (RMC) Units Object Definitions for Closed-Circuit Television (CCTV) Switching Data Element Definitions for Transportation Sensor Systems (TSS) Object Definitions for Signal Control and Prioritization (SCP) Object Definitions for Electrical and Lighting Management Systems (ELMS) TCIP Framework Standard Standard on Common Public Transportation (CPT) Objects Standard on Incident Management (IM) Objects Standard on Passenger Information (PI) Objects Standard on Scheduling/Runcutting (SCH) Objects Standard on Spatial Representation (SP) Objects Standard on On-Board (OB) Objects Standard on Control Center (CC) Objects Standard on Fare Collection (FC) Business Area Objects National Transportation Communications For ITS Protocol-Class B Profile Point to Multi-Point Protocol Using RS-232 Subnetwork Profile Point to Multi-Point Protocol Using FSK Modem Subnetwork Profile Point-to-Point Protocol over RS-232 Subnetwork Profile Ethernet Subnetwork Profile Transportation Transport Profile Internet (TCP/IP and UDP/IP) Transport Profile Simple Transportation Management Framework (STMF) Application Profile (AP) (AP-STMF) Trivial File Transfer Protocol Application Profile File Transfer Protocol Application Profile Application Profile for DATEX-ASN (AP-DATEX) Application Profile for XML Message Encoding and Transport in ITS Center-to-Center Communications Profile Framework Structure and Identification of Management Information (SMI) Procedures for Creating Management Information Base (MIB) Files Testing and Conformity Assessment Documentation within NTCIP Standards Publications The NTCIP Guide Procedure for Evaluating Ground Fault Circuit Interrupters for Response to Conducted Radio Frequency Energy Digital Imaging and Communications in Medicine (DICOM) Part 13: Print Management Point-to-Point Communication Support Digital Imaging and Communications in Medicine (DICOM) Part 9: Point to Point Communication Support for Message Exchange Specialty Transformers (Except General Purpose Type) Steel Armor and Associated Coverings for Impregnated Paper Insulated Cables (ICEA S-67-401 Fifth Edition) Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy Varnished Cloth Insulated Wire and Cable for the Transmission and Distribution of Electrical Energy Thermoplastic-Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy

Bar Coding and Control Wire and Cable Products Cross-Linked-Thermosetting-Polyethylene-Insulated Wire & Cable for the Transmission & Distribution of Electric Enegy Ethylene-Propylene-Rubber-Insulated Wire & Cable for the Transmission & Distribution of Electrical Energy

No longer available in market

Nema 1998 also available

No longer available in market

No longer available in market

NTCIP

i) NEMA ii) American Association of State Highway and Transportation Officials (AASHTO) iii) Institute of Transportation Engineers (ITE)

NTCIP Website Resources

History of the NTCIP Development

Parts of the NTCIP Family

I)

Actuated traffic signal systems

II) Variable message signs III) Environmental sensor stations More types of roadside devices are on the way.

NTCIP The National Transportation Communications for Intelligent Transportation Systems (ITS) Protocol is a family of standards that define the functional control and communications profiles for electronic traffic control The NTCIP has received funding from the U.S. Department of Transportation’s Federal Highway Administration, as part of the Intelligent Transportation Systems program, and is a joint project of these groups: i) NEMA ii) American Association of State Highway and Transportation Officials (AASHTO) iii) Institute of Transportation Engineers (ITE) NEMA initiated the development of the NTCIP in 1992. Since then, AASHTO and ITE joined with NEMA to form a Joint Committee on the NTCIP, which provides guidance for the overall project. The Joint Committee has in turn formed 14 technical working groups to develop and maintain the standards, and has initiated or produced over

NTCIP Website Resources I) A document library (including the drafts that are waiting for publication and those available for user II) Discussion forums for outreach and deployment, Testing NTCIP systems, comments on each of the standards, and for status reports of the committees. III) A protocol chart to aid the user in selecting the compatible standards that can be used for deployment of equipment over different communications media. Those interested in volunteering to serve on the NTCIP working groups should contact the NTCIP Coordinator at NEMA. Project participants have access to password-protected FTP areas and e-mail listservs.

History of the NTCIP Development In early 1993, the FHWA brought together transportation industry representatives to discuss the obstacles in the way of installing equipment for new Intelligent Transportation Systems (ITS). The representatives said that the number one priority was the need for an industry-wide standard communications protocol. Since the NEMA Transportation Section members had already started a part of a new industry standard, they offered to expedite The key objects of the new NTCIP protocol were the interchangeability of similar roadside devices, and the interoperability of different types of devices on the same communications channel. In 1996, the FHWA suggested a partnership of standards developing organizations to expand both user and industry involvement. The American Association of State Highway and Transportation Officials (AASHTO) and the Institute of Transportation Engineers (ITE) signed an agreement with NEMA to establish the Joint Committee on

Parts of the NTCIP Family The development of the NTCIP standards documents branched off in two directions: object definitions and i) Object definitions define particular types of roadside devices and control products, such as traffic signal controllers or dynamic message signs. ii) An “object” is an abstract computer term, representing a range of values or functions that can be accessed or remotely controlled. The object is “defined,” like in a dictionary, so that everyone uses the same spelling of its name.) The definition of the objects is based on another Internet standard developed for controlling networked iii) Communications profiles identify standard groupings of layered profiles. The profiles are also based on international communications standards. The analogy is sometimes made that the objects are the “vocabulary,” and the profiles are the communications rules (“you talk; I listen”), that allow devices from different manufacturers to talk with each other and operate as Beginning in 1999, the field deployment of interoperable equipment was a success because the NTCIP enabled equipment from different manufacturers to interoperate and control: I) Actuated traffic signal systems

II) Variable message signs III) Environmental sensor stations More types of roadside devices are on the way.

Lamps CB Area & Road lighting Connectors Battaries Insulators Conduits Lamp Ballasts Arc-Welding Equipment

ANSI C78 C37 C136 C119 C18 C29 C80 C82 ANSI/IEC 60974