Alat alat kominusi

1. Crushers 1.1. Jawcrushers a. Blake Jaw Crusher

OB Price:

US $100 - 999,999 / Set \

Min.Order Quantity:1 Set/Sets Supply Ability:

50 Set/Sets per Month

Port:

Qingdao ,China

Merk :

Wante

PE series Jaw Crusher is ideally suitable as primary and secondary crusher for material with compression strength less than 320Mpa. Jaw Crusher is of high crushing ratio, larger capacity, well-distributed final product size, simple structure, reliable performance, convenient maintence and wide range of applications.PE jaw crusher is widely used in metallurgy construction, highway, railroad, and water conservancy, etc.

Please carefully examine the fasteners, especially the lubrication components and bolts before starting the machine. Enough oil is needed on each lubrication component. Fasten the loose bolts, clean the crushing cavity, and then start the machine. Insufficient load or over load is not allowed. Moving jaw plate, fixed jaw plate, side guard plate and roof plate are wearing parts, and much attention should be paid to them. Jaw crusher are usually used to crush Limestone,marble, granite, basalt, bricks, blocks, asphalt,iron ore, river cobble, blue stone, coal, cobble stone, construction waste and reinforced concrete.Recycling concrete building rubble is not only able to bring profit to investors, but also good for environment protection. Usually Crusher machine includes following machines: vibrating feeder, jaw crusher,impact crusher, vibrating screen or portable crushing plant. >>What is the technical parameters of blake jaw crusher?

Model

Mainshaft Feed Opening Feed Size Output Size Rotation Size （mm） （mm） Speed （mm） （r/min）

Processing Capacity （t/h）

Power （kw）

Overall Dimension (L×W×H)（mm）

Weight（t）

PE400×600

400×600

≤340

40-90

270

15-40

30

1450×1750×1670

6.5

PE500×750

500×750

≤480

50-110

270

20-80

55

2046×1964×2010

8.9

PE600×900

600×900

≤520

65-130

260

50-150

75

2240×2128×2530

16.6

PE700×1000

700×1000

≤600

70-140

260

80-170

90

2280×2266×2530

18.5

PE750×1060

750×1060

≤630

80-140

250

100-180

110

2538×2350×2782

26.1

PE900×1100

900×1100

≤800

100-200

250

130-250

132

2708×2490×2843

33.4

PE900×1200

900×1200

≤800

100-230

250

180-280

132

2950×2882×3270

42.4

PE1000×1200 1000×1200

≤900

140-250

250

200-400

132

3435×3182×3025

60

PE1200×1500 1200×1500

≤1000

150-350

180

300-800

200

4590×3342×4037

109

Customer's Background: This is a very strong stone company in Russia, buy equipment is mainly used for stone crushi ng and screening to meet local demand for stone. Production Status： Main equipment:PE-900x1200 Jaw crusher 1 set,PF-1515 Impact crusher 1 set,2YK-1548 Vibrating Screen 2 set ect. Raw material:limestone Max.Feeding size:700mm Final product size:0-6mm,6-10mm,10-14mm Capacity:150-200 T/H

b. Dodge crusher

FOB Price:

US $ 10,000 / Set | Get Latest Price

Min.Order Quantity:

1 Set/Sets

Supply Ability:

1000 Set/Sets per Month

Port:

Shanghai

dodge crusher Introduction We adapt the latest manufacturing technology and the unique structural design. The finished stone product is cube and has no tension or cracks. The grain shape is quite good. Impact crusher can handle each kind of coarse, medium and fine materials ores, rocks (granite, limestone, concrete, etc.), which particle size is not more than 120-500 mmand compressive strength is below 320 MPa. Impact crusher is widely used in water and electricity, highway, artificial aggregate, crushing and other industries. This series of impact crusher has unique structure.It's equipped

with high chrome hammer.Its unique counterattack lining is suitable for hard rock crushing and energy efficient. Nesting particle size can be adjusted to simplified crushing process. This crusher has large crushing ratio, high crushing efficiency, cubic shape and optional broken, etc. dodge crusher Structure

Impact crusher uses impact energy to crush materials. When impact crusher works, it's driven by the electric motor. The rotor has high-speed rotation. while the materials go into the plate hammer area, and impact the plate hammer on the rotor, then is thrown back again to the counter device to break. then from the back liner bounced back to the blow bar again broken,material is sent into one, two, three and impact chamber repeated broken until the material is crushed to the desired particle size then discharge from the outlet port. Adjust the gap between the rotor and frame to change the material shape and particle size.

dodge crusher Features

1.

Multiple chamber can make it evenly and suitable for crushing hard rock.;

2. Large low feed port makes it easy to layout production line and increase the feed size; 3. New wear-resistant material of the plate hammer, impact plate and liner can last longer life; 4. High chrome hammer and unique counterattack lining board are particularly suitable for crushing hard rock and energy efficient;

5. The entire plate hammer structure makes the materials particle size more smaller and cube-shaped; 6. It uses fully hydraulic system, so it is easy and more convenient for maintenance and replacement of worn parts.

dodge crusher In Crushing Plant 1. Primary Crushing line: The big stones in the stone production line are coarsely crushed in the jaw crusher sent by the vibrating feeders through the bunker evenly. The coarsely crushed stones are sent to the impact crusher by the belt conveyor for further crushing.

2. Screening Plant: After tertiary crushing, the materials are screened in the vibrating screen through the belt conveyor to classify several sizes of stones.The stones which can meet the requirements will be sent to the finished product material piles by the belt conveyor, while the left stones will be sent to the impact crusher for another further crushing to form a closed circuit cycle.

The finished product can be classified and combined according to the customers' needs. The dust removal equipment can be added in order to protect the environment.

dodge crusher Technical Parameter: Model

PF-1007 PF-1010 PF-1210 PF-1214 PF-1315 PF-1520

Specificatio Feed n Opening(m m) (mm) Φ1000×70 400×730 0 Φ1000×10 400×1080 50 Φ1250×10 400×1080 50 Φ1250×14 400×1430 00 Φ1320×15 860×1520 00 Φ1500×20 830×2040 00

Max. Feeding Size(mm)

Capacity (t/h)

Model of Motor Power (kw)

(t)

Overall Dimensions(L×W× H) (mm)

300

30-70

45

12

2330×1660×2300

350

50-90

55

15

2370×1700×2390

350

70-130

110

17.7

2680×2160×2800

350

100-180

132

22.4

2650×2460×2800

500

130-250

220

27

3180×2720×2620

700

300-550

440

50.6

3959×3564×3330

Weight

Any change of technical data shall not be advised additionally.

c. Roller Bearing Jaw crusher

FOB Price:

US $ 1,000 - 9,999,999 / Set

Min.Order Quantity: 1 Set/Sets Supply Ability:

999 Set/Sets per Month

Port:

Shanghai

                    

Condition: New Application: ore crushing and mining beneficiation Motor Type: DC Motor Power(W): 5-315KW, 5-315KW Capacity(t/h): 2-1000t/h Place of Origin: Shanghai, China (Mainland) Brand Name: ChangLei Model Number: ZSW Dimension(L*W*H): 6310 *3262 *2330mm Weight: 5000kg-99999kg Certification: ISO 9001, CE,BV certificate etc. Warranty: 3 years After-sales Service Provided: Engineers available to service machinery overseas Spare part: supply for the whole year Rotation speed of eccentric shaft: 160r/min Factory: shanghai changlei feed size: 25-400mm quality warranty: 3 years Adjusting range of discharge opening: 100-400mm Installation: engineer guide on site Processing capacity: 13-2200t/h Features Of The roller bearing jaw crusher:

1. Simple structure, easy maintenance; 2. High crushing ratio, even output granularity; 3. High reliability, low investment; 4. Low noise, less dust. The roller bearing jaw crusher is widely used in mining, building materials, chemical industry, metallurgy and so on. The roller bearing jaw crusher is suitable for primary and secondary crushing all kinds of minerals and rocks with compressive strength less than 320 MPa.

1.2. Gyratory Crusher a. Cone crusher New CS Series High-efficiency Spring Cone Crusher ( CS cone crusher) CS cone crusher introduction: CS Series High-efficiency Spring Cone Crusher concentrates on the specialty of high-frequency, optimization of cavity and reasonable impact. This CS series cone crusher is widely used to crush metalliferous and non-metalliferous ores, cement, construction and sand.

Merk :

Pioneer

FOB Price:

US $ 20,000 - 800,000 / Set

Min.Order Quantity: 1 Set/Sets Supply Ability:

80 Set/Sets per Month

Port:

shanghai

Working principle of CS cone crusher When CS series cone crusher is working, the motor drives the eccentric ring spin through V-belt, big belt wheel, transmission shaft, big bevel gear and small bevel gear. The crushing cone spins by the force of eccentric ring, which makes the crushing wall approach and leave rolling mortar wall to and fro, so the materials get impacted and broken in the crushing chamber formed by fixed cone and movable cone. The materials were discharged from the bottom after several times’ break until they get the required grade.

Sturcture of CS cone crusher

Specification of High Quality clay CS Series cone crusher Equipment ( cs cone crusher)

Model

CSB75 CSB16 0

CSB24 0

CSB31 5

Feed Opening Dia. mm Cavity Closing Open (feet) Side Side (mm) (mm) Fine 83 102 900 (3') Coarse 159 175 Fine 109 137 1295 (4 Mediu 188 210 1/4') m Coarse 216 241 Fine 188 209 1650 (5 Mediu 213 241 1/2') m Coarse 241 268 Fine 253 278 Mediu 2134 (7') 303 334 m Coarse 334 369

Outlet Setting (mm) 9-22 13-38 13-31 16-38

Shaft Speed (r/min)

Power (kw)

580

75

485

185

19-51 16-38 22-51

31-64

45-91 59-163 109-181 132-253

15

2821×1880 ×2164

27

2800×2342 ×2668

55

3911×2870 ×3771

110

4613×3251 ×4732

172-349 181-327 485

240

25-64 19-38 25-51

Capacity Weight Dimension (t/h) (t) (mm)

258-417 299-635 381-726

435

315

608-998 789-1270

Feature of CS cone crusher

1. High-performance 2. Good products size composition

The crusher applies for laminated crushing principle to make cubic shapes of final products stand for larger proportion. Acicular and flake shape products decrease and size fraction much more well-proportioned.

3. Good stability

The protection device has fixed discharge opening returning point and the original discharge opening can returning back immediately after the metal goes through the crushing chamber.

4. Convenient Cleaning-up

If the crusher stops under loading condition, hydraulic cleaning system can clean up the crushing chamber quickly so that decrease the downtime.

5. High reliability.

6. Easy maintenance and operation

All parts can be disassembled from top and the upper side, so that fixed cone and dynamic cone can be disassembled easily.

Under high shock and vibration environment, bronze Bearing can keep excellent bearing capacity and it is much more economic and easy for maintenance.

7. Low production costs

Due for big capacity, high reliability and easy maintenance, the production costs has been recuded greatly.

8. Widespread use 9. Separate Lubrication

1.3. Crushing Rolls a. Smooth Roll Crusher

FOB Price:

US $1,000 - 888,888 / Set

Min.Order Quantity: 1 Set/Sets Supply Ability:

80 Set/Sets per Month

Port:

Shanghai

  

Condition: Application: Motor Type:

New stone and ore AC Motor

           

Power(W): 110KW Capacity(t/h): 15-650TPH Place of Origin: Shanghai China (Mainland) Brand Name: Zenith Model Number: PEW series Dimension(L*W*H): 3300*2320*3120 Certification: CE&ISO Warranty: 12 Months After-sales Service Provided: Engineers available to service machinery overseas Spare parts supply: For whole using life Test&installation: Engineer assigned After-sale service: Forwhole using life

smooth roll crusher working principle:

The structure of smooth roll crusher: main frame, eccentric shaft, a large belt pulley, fly wheel, swing jaw, side guard plate, toggle plate, Rear bracket, adjust gap screw, reset spring, and fixed jaw and swing jaw board etc., and the toggle plate also plays a role of protection.

The motor transmits power through belt and belt pulley, drives the swing jaw surround the eccentric shaft do periodic motion. The angle between toggle plate and swing jaw increases when swing jaw moves up., which makes the moving jaw get closes to the fixed jaw.

At the same time the material is squeezed, rubbing, grinding and other multiple broken. The angle of Jaw Crusher between toggle plate and swing jaw decreases when swing jaw moves down, the moving jaw of Jaw Crusher moves away from fixed jaw by the pulling of rod and spring, the products after crushing will be discharged from the outlet of Jaw Crusher.

smooth roll crusher structure and application:

smooth roll crusher is widely used for medium crushing various ores and bulk materials in mining, smelting, building materials, highway, railway, water, chemical industry and other industries. The crushed materials are of a compressive strength less than 320MPa. Jaw crusher has the characteristics of big crushing ratio, uniform finished product size, simple structure, reliable work, convenient repair and low operating costs. Then how are jaw crushers used in the sand making line? please see the following picture:

smooth roll crusher techinical data: Model

Feed Opening (mm)

PEW250x1000

250x1000

PEW250x1200

250x1200

PEW400x600

400x600

PEW760

760x1100

PEW860

860x1100

PEW1100

1100x1200

b. Toothed Rolled Crushers

FOB Price:

US $100 - 999,999 / Set

Min.Order Quantity: 1 Set/Sets Supply Ability:

30 Set/Sets per Month

Port:

QINGDAO



 Condition:  Type: crusher  crusher,scrap crusher  Motor Type: AC Motor 

         

New metal Application: metal

Power(W):

600 kw Capacity(t/h): 10-15 Place of Origin: Shandong China (Mainland) Brand Name: Wante Model Number: PSX-600 Certification: ISO9001&CE Warranty: 1 year After-sales Service Provided: Engineers available to service machinery overseas Name: double teeth roll crusher feed size(mm): 1600 Output size: as you request to discharge



Moter power(kw):

600

>>What is the detail of double teeth roll crusher?

The steel scrap shredder can scrap metal, slag, iron slag, metal and other materials under the angle of the broken metal recycling large crushing machine. scrap metal shredder had combined with the special technical ingenuity and perfect design.It not only has the world-class performance and good reliablity, but also the operational cost is lower.The new steel scrap shredder is widely used in the scrap of iron,steel,car racks, motorcycle racks, bike racks, and a large class of scrap steel items.

>>What is the working princip le of double teeth roll crusher?

Scrap iron and steel raw materials shipped to feed incline through the scales conveyor, feed incline mounted on two rotatable grinding rollers, high and low , to flatten wins and into the crushing chamber. In the crushing cavity composed of ten fixed on the spindle between the disc and ten security branch of the disc is free to swing the hammer, generated by high-speed rotation speed of scrap metals smashing, torn, broken handle make scrap metal processed into lumps or granules, through the lower part of the grid and the top of the drop in the vibrating

conveyor. Firstly it failed to deal with a small enough scrap metal, and will again handle the rotating disc and hammer until it can pass through the grid so far.

>>What is the features of double teeth roll crusher?

1.Equipped with the large inertia, long life, fully enclosed rotating body. 2.Using the heavy duty rotating body bearing. 3.The rotating body has lifting device, easy for staff close to the equipment and safety mainte nance. 4.Discharge grille with good to engage in impact performance. 5.Equipped with good impact resistance of the steel liner. 6.Equipped with the hydraulic opening of the upper device and locking mechanisms for maintance staff easy to close to the middle liner to safety repairs.

>>What is the applacation of double teeth roll crusher? The shredder is designed to shred a wide variety of light and thin materials as discarded automobiles, tin plate, household appliances, bicycles, empty cans, etc, making the materials into pure charge for steelmaking. By smashing and compressing, the shredder will remove the impurities, raise density, lower transporting and smelting cost to offer good furnace charge for steel plant. The machine is able to shred: 1. Whole or flattened car bodies (without tires, fuel/gas tanks, engines & gear boxes). 2. Tin plate material. 3. Electrical appliances (without motor, compressor, axles). 4. Bicycles & similar materials. 5. Empty tanks (without liquid materials & painting, etc). 6. Other scraps suitable for shredding.

>>What is the advantages of double teeth roll crusher?

1.The structure of the scrap steel crusher,stable and compact, easy operation and maintenance;the material is on the conveyor,which improves efficiency and automate operations; 2.A gate with a magnetic device, separate completely iron and other impurities, so that the best use, crushed materials, clean and bright, you can directly meet the "feed into the furnace" requirement; 3.Hammer and liner material using high-manganese steel casting, prolong machine life, scrap steel crusher to reduce the cost of transport, labor and other aspects; 4.Structural stability compact, easy maintenance, paint effect more than 95%, high yield, high profit margins, the material on the conveyor feeding achieve automation, a gate with a magnetic device to achieve the separation of iron and other impurities, material crushed, big or small, small footprint,the scrap material meets directly the "fine material into the furnace requirements" 5.Applicable to steel subsidiary companies, professional scrap processing and distribution companies, all recycling companies. >>What is the technical parameters of double teeth roll crusher? Model

Feed size(mm)

Motor power kw(HP)

Capacity(T/H)

PSX-400

1600

400

8-12

PSX-600

1600

600

10-15

750

20-25

900

25-30

1200

30-40

1500

35-50

2250

50-70

3000

100-130

4420

170-220

5520

260-320

6000

300-400

7500

345-420

PSX-750 PSX-900

2200

PSX-1200 PSX-1500 PSX-2250 PSX-3000 PSX-4420 PSX-5520 PSX-6000 PSX-7500

2500 2600 2700 3000

c. Disintegrator/Cage Mills

FOB Price:

US $ 1 - 999,999 / Set

Min.Order Quantity: 1 Set/Sets spare parts provided Supply Ability:

30 Set/Sets per Month 10set/days

Port:

Qingdao/Shanghai

                   

Condition: New Type: Jaw Crusher Application: Stone crushing Motor Type: AC Motor Power(W): 20-110kw Capacity(t/h): 30-800t/h Place of Origin: Henan, China (Mainland) Brand Name: KBW Model Number: PE Dimension(L*W*H): 2*1.8*2.2m Weight: 12t Certification: ISO/CE Warranty: 2 years, 2 years After-sales Service Provided: Engineers available to service machinery overseas Installation: Under guide or worker sent to install Techinical support: Providing Spare parts: Providing Motor brand: General Working Volatage: 220v-240v Working condition: General temprature & moisture condition

Tin ore disintegrator plant working principle: Big size stones are transferred to primary crusher through vibrating feeder from hopper for first crushing, then the crushed materials are transferred to impact crusher through belt conveyor for secondary crushing. The materials crushed will be transferred to the vibrating screen, and separated to different sizes. The aggregate with suitable size will be transferred to the final product pile and aggregate with unsuitable size will be transferred to the impact crusher for re-crushing. This forms a closed and manifold cycles. The sizes of final products will be graded and separated according to customers' requirements, and the duster will be attached for the sake of environment protection. Tin ore disintegrator Specification: 1. Capacity: 80-120t/h The mainly device of this Crushing Screening production line including Vibrating Feeder(GZD960X3800),Jaw crusher(PE600X900),Cone crusher(CSB160)/impact crusher(PF1214),three sets vibrating screen (3YZS1860),Belt conveyor, electronic control system. This Crushing Screening Solution is widely used in the crushing granite, basalt, river stone, andesine, Iron ore, manganese ore and other hard material. 2. Capacity: 120-200t/h

The mainly device of this Crushing Screening production line including Vibrating Feeder(GZD1100X4200),Jaw crusher(PE750X1060),Cone crusher(HPC220)/Impact crusher(PF1315),three sets vibrating screen (3YZS2160),Belt conveyor,electronic control system. This Crushing & Screening Solution is widely used in the crushing granite, basalt, river stone, andesine, Iron ore, manganese ore and other hard material. 3. Capacity: 200-300t/h The mainly device of this Crushing Screening production line including Vibrating Feeder(GZD1300X4900),Jaw crusher(PEW860),two sets Cone crusher(CSB160/HPC220),three sets vibrating screen (3YZS2160),Belt conveyor,electronic control system. This Crushing Screening Solution is widely used in the crushing limestone, marble, dolomite, gypsum, sand stone, etc soft or medium hard material 4. Capacity: 300-500t/h The mainly device of this Crushing Screening production line including Vibrating Feeder(GZD1300X4900),Jaw crusher(PEW1100),two sets Cone crusher(HPC400/HPC220),three sets vibrating screen (3YZS2160),Belt conveyor,electronic control system. This Crushing Screening Solution is widely used in the crushing limestone, marble, dolomite, gypsum, sand stone, etc soft or medium hard material 5. Capacity: 500-800t/h The Crushing Screening production line mainly including Vibrating Feeder(GZD1500X6000),Jaw crusher(PE1200x1500),two sets impact crusher(PFW1415),two sets vibrating screen (3YZS2460),Belt conveyor,electronic control system. This Crushing Screening Solution is widely used in the crushing hard material and usually used in the big projects construction such as the infrastructure waste disposal,Railway construction and so on.

2. Grinders 2.1. Hammer Mill dan Impactor

FOB Price:

US $ 5,000 - 75,000 / Set

Min.Order Quantity: 1 Set/Sets Supply Ability:

100 Set/Sets per Quarter

Port:

Qingdao

 Type: Hammer Crusher  Capacity(t/h): 35-45  Place of Origin: Henan, China (Mainland)  Brand Name: Yufeng  Model Number: 800*800  type: Stone Hammer Mill  application: crushing stone, rocks, minerals  Quality: hig standard

  Condition : New

Working Principle Of Stone Hammer Crusher/hammer mill The electric motor drives the rotor, and the rotor moves and makes the hammer board rotate f aster. The materials are crushed in the crusher by the rotated hammer board. The end products come out via the strips of the screen under the machine. The size of the granularity can be adj usted by changing the distances among the screen strips. Main Technical Parameter of Hammer Mill: Discharging size (mm) 0-30 0-35 0-35 0-45 0-45 0-45 0-45 0-45 0-45 0-45 0-60

Capacity (t/h) 5-8 10-12 12-18 20-25 35-45 25-40 40-80 20-50 90-110 120-170 220-280

2.2. Rolling Compression Mills a. Roller Mill

FOB Price:

US $ 1,700 - 970,000 / Set

Min.Order Quantity: 1 Set/Sets Supply Ability:

97 Set/Sets per Month

Port:

Qingdao,Tianjin, Shanghai or others

Main Structure of Raymond Roller Mill This machine is mainly composed of main engine, analytical engine, air blower, clone separator for final products, clone separator for micro powders and air pipe, and the main engine is composed of rack, inlet air volute, relieving tool, grinding roll, grinding ring and cover piece.

Application of Raymond Roller Mill Raymond mill is applicable to the grinding and processing of more than 280 kinds of nonflammable and non-explosive materials with hardness less than 7 and humidity less than 6% in mining, construction, chemical industry and metallurgy, such as barite, calcite, feldspar, talcum, marble, limestone, clay, glass. The fineness of the finished product can be adjusted from 100 meshes to 325 meshes according to requirements. It is the main and widely used grinding machine. Working Characteristics of Raymond Roller Mill

When the grinding roll and the grinding ring are abraded, the output and the fineness of the final products are not influenced. The changing cycle of the grinding roll and the grinding ring is long. The air separation flow of this machine cyclically flows inside the air blower, mill case, cyclone separator and air blower, so that compared with high-speed centrifugal crusher, this machine has little powder dust and the operational workshop is clean

Parameters of Raymond Roller Mill

b. Bowl Mill

The Raymond Mill is designed by adopting advanced structure of similar products at home and abroad and bettering them in the industry. The Raymond bowl mill has higher grinding efficiency and lower energy consumption, smaller floor area and investment than that of the Ball Mill.

FOB Price:

US $1,000 - 99,999 / Set

Min.Order Quantity: 1 Set/Sets as requested Supply Ability:

100 Set/Sets per Month

Technical Parameters of Raymond Bowl Mill Type Parameter Feeding size (mm) Particle size of finished product (mm) Shift output of different material fineness (t) Rotation speed of central shart (r/min) Diameter of pulverizing ring (mm) Diameter of pulverizing roller (mm) Height of pulverizing roller (mm) Main Motor Fan Motor Analyzer motor

6R4525 5R4119 4R3216

3R90

3R85

4R90

4R85

3R75

3R65

3R60

≤30

≤25

≤25

≤25

≤20

≤20

≤15

≤15

0.1250.044

0.1250.044

0.1250.044

0.1250.044

0.1250.044

0.1250.044

0.1250.044

0.1250.044

16-120

8-60

4-45

3-35

2-28

1.5-20

1-18

0.5-8

82

105

130

160

160

160

180

280

1770

1400

1073

973

885

865

725

495

450

410

320

300

270

260

210

140

250

190

160

160

150

150

150

100

Y315m4-132

Y280s4-75

Y225s4-37

Y225m- Y225m8-30 8-22

Y225s8-18.5

Y200L8-15

Y160m6-7.5

Y315m- Y250m4-132 4-75

Y200L4-37

Y180m4-22

Y160L4-15

Y160m4-11

Y132s2-5.5

Y160m4-11

Yc1204a-5.5

Y112m- Y112m- Y112m- Y112m6-2.2 6-2.2 6-2.2 6-2.2

Yc2004B-7.5

Y160L4-15

Y90L6-1.1

2.3.

FOB Price:

Attrition Mills

US $ 7,000 - 250,000 / Set

Application Attrition Mill The ball mill generally grinds material 1/4 inch and finer down to the particle size of 20 to 75 microns. attrition mill is a key equipment to grind the crushed materials, and the ball mill is widely used in powder-making production line including cement, silicate, new-type

building material, refractory material, fertilizer, ore dressing of ferrous metal and non-ferrous metal, glass ceramics, etc. And the ball mill can grind various ores and other materials with dry type and wet type. There are two kinds of ball mill, grate type and overfall type due to different ways of discharging material.

Structure of Attrition Mill

Technical Parameters:attrition mill Model

Cylinder rotary speed(r/min)

Ø900×1800

39

Ø900×3000

39

Ø1200×3000

36

Ø1200×4500

32

Ø1500×3000

27

Ø1500×5700

28

Ø1830×3000

25

Ø1830×6400

24

Ø1830×7000

24

Ø2100×3600

23

Ø2200×4500

21

Ø2200×6500

21

Ø2200×7000

21

Ø2200×7500

21

Ø2400×4500

21

Ø2400×8000

20

Ø2700×3600

21

Ø2700×4000

20

Ø2700×4500

20

Ø3200×4500

18

Ø3200×5400

18

Ø3600×4500

17

Ø3600×6000

17

Ø3600×8500

17

2.4.

Tumbling Mills

a. Rod-Mills

FOB Price:US $5,600 - 89,000 Min.Order Quantity:1 Piece/Pieces

Rod mill 1. Energy saving 2.High efficience 3.good Quality 4.Low price Energy-Saving Rod mill Application: Energy Saving rod Mill is generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency with ball mills, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. Various classifiers, such as screens, spiral classifiers, cyclones and air classifiers are used for classifying the discharge from ball mills. Ball mill is an efficient tool for grinding many materials into fine powder. The ball mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material. 1) Energy saving rod mill, reduce the energy consumption by 30% 2) improve fineness of discharging 3) increase capacity by 15-20% Energy-Saving Rod mill Introduction: Energy Saving rod Mill grinds material by rotating a cylinder with steel grinding balls, causing the balls to fall back into the cylinder and onto the material to be ground. The rotation is usually between 4 to 20 revolutions per minute, depending upon the diameter of the mill. The larger the diameter, the slower the rotation. If the peripheral speed of the mill is too great, it begins to act like a centrifuge and the balls do not fall back, but stay on the perimeter of the mill. The point where the mill becomes a centrifuge is called the "Critical Speed", and ball mills usually operate at 65% to 75% of the critical speed. Energy-Saving Rod mill Application: EnergySaving rod Millis generally used to grind material 1/4 inch and finer, down to the particle size of 20 to 75 microns. To achieve a reasonable efficiency with ball mills, they must be operated in a closed system, with oversize material continuously being recirculated back into the mill to be reduced. Various classifiers, such as screens, spiral classifiers, cyclones and air classifiers are used for classifying the discharge from ball mills. Ball mill is an efficient tool for grinding many materials into fine powder. The ball mill is used to grind many kinds of mine and other materials, or to select the mine. It is widely used in building material, chemical industry, etc. There are two ways of grinding: the dry process and the wet process. It can be divided into tabular type and flowing type according to different forms of discharging material. Technical Parameter of Energy-Saving Rod mill: Type

Feed Size

Discharging Size

Output (t/h)

Power of Motor (Kw)

HS-930

6-25

0-5

3-10

22

Weight (t) 4.5

HS-1224

6-25

0-5

5-25

45

11.5

HS-1245

6-25

0-5

6-40

55

13.8

HS-1530

6-25

0-5

7-45

75

17

HS-1557

6-25

0-5

10-85

130

24.7

HS-1830

6-25

0-5

15-100

130

31

HS-1860

6-30

0-5

30-120

210

41

b. Ball-Mills

FOB Price:    

US $8,000 - 300,000 / Set

Condition: New Type: Ball Mill Motor Type: ANY Power(W): 155kw

              

Capacity(t/h): 0.5-260 Place of Origin: Shanghai China (Mainland) Brand Name: Shanghai Minggong Model Number: All Dimension(L*W*H): ANY Certification: CE ISO9001:2000 Model: All Model name: Ball mill suitable for mineral processing, cement, lime, crushing, etc Cylinder rotary speed (r/min): 39-17 Loading ball weight (t): 1.5-144 Input size (mm): ≤25 Discharge size (mm): 0.074-0.4 Capacity (t/h): 0.5-260 Motor power (kw): 18.5-1800 Weight (t): 4.5-260

Specifications 1.can design and manufacture at customer's special need. 2.Mining grinding ball mill for ore, cement clinker, gypsum, glass, Working principle: Ball mill is an efficient machine for fine powder grinding and key equipment for grinding after the crushing process. There are two ways of ball mill grinding: the dry way and the wet way. It is used to grind many kinds of mineral ores and other materials, or to select mine. Ball mill is also widely used in the manufacturing industries, such as cement, silicate, new building material, refractory material, fertilizer, ferrous metal, nonferrous metal and glass ceramics and can be used for the dry and wet grinding for all kinds of ores and other materials.

Structure: The machine is composed by feeding part, discharging part, rotation part and driving part (reducer, small driving gear, electric motor and electric control). Feature: (1). Easy maintenance and operation; (2). Big crushing ratio, uniform end product size; (3). Simple structure; (4). Low operating cost.

TUGAS 1 ALAT INDUSTRI KIMIA ALAT-ALAT KOMINUSI

Disusun Oleh : SAVANNAH YONITA C. 12521039 KELAS SELASA 12:30 (B)

PROGRAM STUDI TEKNIK KIMIA FAKULTAS TEKNOLOGI INDUSTRI UNIVERSITAS ISLAM INDONESIA YOGYAKARTA

TUGAS ETIKA PROFESI Etika dan Penerapan Teknologi dalam Perspektif Agama Islam

Disusun Oleh : 1. Savannah Yonita C. 2. Hadid

(12521039)

PROGRAM STUDI TEKNIK KIMIA FAKULTAS TEKNOLOGI INDUSTRI UNIVERSITAS ISLAM INDONESIA YOGYAKARTA