ALARM RET

 

E// RET Alarm

StandardizedRet LicenseNotValid

RetCascadingLicense NotValid

RetFailure

RetPortCurrent TooHigh

CommunicationLostWith Ret

RetProfileParameter  ElectricalAntenn Error  aTiltOutOfRange

Solve Related

Check the antenna type

Restart a RETU/ARETU restartAuxUnit for the MO Function/ Feature is used?

No

Faults PiuConnectionLost Restart the RRU

Deactivate the feature

YES (If alarmed more than 1Hr) Expired/Removed License à Contact E// Local account

H.W .Test RETU/ARETU RETU/ARETU Tools menu à Test Board à  Lock Board à start test à  Unlock Board

Lock the RETU/ARETU, TMA&RRU

No

 ARETU_CASCADE?

Lock the RETU/ARETU, TMA&RRU

& disconnected from power  Inspect for objects obstructing & clean up & greasing Gears & Screw rods/regulators Connect the power & Unlock RETU/ARETU,TMA&RRU RETU/ARETU,TMA&RRU Wait up to 10 minutes and check Then Calibrate RET ForceCalibration

Lock the RETU/ARETU, TMA&RRU & Disconnected from power  Replace RET/ARETU or RET cable according to vendor's instructions  ARETU:Collect  ARETU:Colle ct the serial n number umber  ARETU_CASCADED:  ARETU_CASC ADED: Install N New ew Cabin Cabinet et & Site con contains tains new “UniqueHwId “ Conne Connect ct tthe he pow power er & Unlock RETU/AR RETU/ARETU,TMA&RRU ETU,TMA&RRU Wait up to 10 minutes and check

SendAntennaConfigurationFile in in RetDevice  RetDevice to  to re-download the configuration file of the RET Make sure the AuxPlugInUnit MO is enabled auType = ARETU, ARETU, or AIR Wait up to 10 minutes and check.

   d   e   g   a   m   a    d   n   u    d   n   a    d   e    t   c   e   n   n   o   c   y    l    t   c   e   r   r   o    C

In the relevant SectorAntenna

Check the tilt setting

Check RETU & TMA Cables Unlock RETU/  ARETU,TMA&RRU  ARETU,TMA&RRU

MissingRet Profile

Matched

Yes

 As Site Installation Document

Check if a UniqueHwId  UniqueHwId  is not found or duplicated

Check the RET profile Minimum and maximum tilt

Not Matched Create new RET profile  Install Corrected Ca b biine t & Sit Site e contains new ” UniqueHwId “ Lock the RETU/ARETU, TMA&RRU & Disconnected from power  Replace RRUW/ASC/ TMA Connect the power & Unlock RETU/  ARETU,TMA&RRU Wait up to 10 minutes and check

 Antenna type, RETU type, minimum and maximum tilt and checksum

Create a Configuration Version CV Set Startable, add to Rol Rollback lback list

Spare before move: Triple Power Wave (8230.4) + Single Power Wave (8210.4)  Amphenol/JayBeam Triple = (MDDU-G20G22)  Amphenol/JayBeam Single = ((MDCU-G0000 MDCU-G0000)) KATHREIN RET KRY12163/1  + cable RET from each type (02230BUF,  1/TSR48421/3000, 1/TSR48431/2500 1/TSR48431/2500 and 04070097) + jumper 6m and 3m + connector 7/8 + Weatherproofing Kits (221213) Cleaning KIT (White Grease + DWL + Brushes + Dry Textile/Towel …)