Administrator
Short Description
Download Administrator...
Description
Administrator Program to registrate and administrate the Users
User's Manual
v.3.0
Adminstrator Contents
1
Adminstrator Contents
1 .................. ADMINSTRATOR CONTENTS......................................................................2 2 .................. ENABLE USER FROM SYSTEM .................................................................. 4 2.1 ............... Purpose of this function .............................................................................. 4 2.2 ............... User groups relation .................................................................................... 4 2.3 ............... Activation of this function ........................................................................... 4 2.4 ............... Resetting the "User from system" function...............................................5 3 .................. ENABLE USER FROM SYSTEM: EXAMPLE...............................................6 4 .................. USERS INFO..................................................................................................7 5 .................. ADMINISTRATOR: DEFINITION...................................................................8 5.1 ............... Administrator: definition and tasks ............................................................ 8 5.2 ............... Registration of a New User..........................................................................8 5.2.1 ............ The User Management...................................................................................8 5.2.2 ............ The User Password........................................................................................ 9 5.2.3 ............ The User Group..............................................................................................9 5.2.4 ............ The User Level ............................................................................................... 9 5.2.5 ............ Finish Definition.............................................................................................. 9 5.2.6 ............ Window Positions ........................................................................................... 9 5.3 ............... Change a User Entry .................................................................................... 9 5.4 ............... Store Changes ............................................................................................ 10 5.5 ............... Cancel Changes..........................................................................................10 5.6 ............... Delete User Entry........................................................................................10 5.7 ............... Change User Level ..................................................................................... 11 6 .................. FURTHER TASKS ....................................................................................... 12 6.1 ............... Rescan List ................................................................................................. 12 7 .................. OVERVIEW: USER RIGHTS ....................................................................... 13 7.1 ............... User Rights ................................................................................................. 13 7.1.1 ............ Deny Rights..................................................................................................13 7.1.2 ............ Dialogue window .......................................................................................... 13 8 .................. REVISION MANAGEMENT ......................................................................... 15
2
v 3.0
22.05.06
Adminstrator Contents
8.1 ............... Activate Revision Management.................................................................15 8.1.1 ............ Introduction...................................................................................................15 8.1.2 ............ Activate the Function....................................................................................15 8.1.3 ............ Start Conditions............................................................................................15 8.1.4 ............ Deactivate the Function................................................................................16 8.2 ............... Revision Management: Settings ............................................................... 16 8.2.1 ............ Activating the Function ................................................................................. 16 8.2.2 ............ Additional Audit Trail Entries ........................................................................ 16 8.2.3 ............ Password Input.............................................................................................17 9 .................. COPY PROTECTION:DONGLE .................................................................. 18 9.1 ............... Further Hardware........................................................................................18 9.2 ............... Read Dongle Data.......................................................................................18 9.3 ............... Program Copy Protection .......................................................................... 18
22.05.06
v.3.0
3
Enable User from System
2
Enable User from System
2.1
Purpose of this function
The "User from system" function makes it possible that MCOSMOS, when starting, takes the user currently logged onto the operating system. In this case there is, consequently, no necessity for the user to get logged again onto MCOSMOS. Minimum requirements This function can only be used with Windows 2000 or Windows XP Professional. The use of this function is not possible with Windows XP Home Edition, Windows NT or Windows 98 (or any lower operating system).
2.2
User groups relation
Operating system user group
MCOSMOS user level
Administrators
Admin
Power users
Level 5
Users
Level 4
Guests
Level 1
Each user of the operating system is a member of an "Operating system user group". The function designated "User from system" automatically relates every user group to a MCOSMOS user level (see table). The registry of user names and passwords in the MCOSMOS user management is no longer required. What you have to do is just to define the MCOSMOS user rights required to be related to the four different MCOSMOS user levels. Refer to "User Rights".
2.3
Activation of this function
Immediately upon installation of MCOSMOS you can call the MCOSMOS user management, provided you possess the MCOSMOS administrator rights.
Click on the "Editing" function provided in the PartManager within the "User" menu.
In the subsequent "User management" window, activate the "User from system" function in the "Editing" menu".
Only after restart of MCOSMOS the new user rights are regarded as allocated.
4
v 3.0
22.05.06
Enable User from System
Upon restart of MCOSMOS, in the PartManager's status line you see the user who is currently logged onto the operating system, and also the MCOSMOS user level automatically related to said user by the program, e.g.: Miller, Level 5.
The activation of this function is indicated by a tick before the "User from system" menu entry.
If the "User from system" function has been activated, the "Auto Login" MCOSMOS function will be ignored. At the same time, the "Login" function in the "User" menu of the PartManager is deactivated.
2.4
Resetting the "User from system" function
Only a member of the operating system user group "Administrators" is able to reset the "User from system" function. To do this, the function is clicked off. The procedure is as follows: Click on the "Editing" function in the PartManager. Deactivate the "User from system" function in the "Editing" menu of the subsequent "User management" window. For further information on this subject refer to "Enable User from System: Example".
22.05.06
v.3.0
5
Enable User from System: Example
3
Enable User from System: Example
It is quite possible that you wish to give a user who usually belongs only to the "Power users" group in the operating system, more MCOSMOS rights than those of level 5. This necessity may arise in cases where this user is to define rights, for example, in the MCOSMOS user management. Follow these steps: Enter the user in the MCOSMOS user management. The user registration entry should conform with the way the user logs onto the system. Then it is necessary that you allocate to the user the level "Admin" in the MCOSMOS user management. Activate the "User from system" function.
If this user would log onto the operating system, he would usually be related to the MCOSMOS user level 5, as he belongs to the group "Power users".
The program, however, locates the same user now also in the MCOSMOS user management. In the MCOSMOS user management, however, the user is related to the "Admin" level..
Thus, in MCOSMOS, this user has the full administrator rights. The user is regarded as • •
6
a power user (within the operating system), but... nevertheless as an administrator (in MCOSMOS).
v 3.0
22.05.06
Users Info
4
Users Info
The menu "user" gives you following functions:
Define new users , Change the entries of existing users and
Delete user entries .
The administrator has to define exactly which rights and levels each user is assigned.
22.05.06
v.3.0
7
Administrator: Definition
5
Administrator: Definition
5.1
Administrator: definition and tasks
The administrator (Admin) has - depending on the philosophy of the company - the following tasks: registrar or delete new users
input, change, or delete passwords assign levels to the users
Change User Level
make one user automatically "Login" assign the rights to the levels
The administrator can only perform his tasks after he has logged in as "Admin" with his special level: "Admin". This can be seen ...
in the status line of the PartManager window, if this option has been set and ...
in the pull down menu "User". Here the administrator can activate the "Editing". With the function "Edit" now active, the administrator is authorised to administrate his users (see also Login with Password).
5.2
Registration of a New User
An operator can only work with the system, if he has been registered as a user with the corresponding rights. This registration is done by the administrator using the function "Edit user" of the pull down menu "User". After activating the function "User" and "Edit" you come as the administrator to the window "User management".
5.2.1
In this window you activate once more the "Editing" and "User". Now you get the complete window for the user management, containing a table with the users.
The User Management
You manage the users in two windows; the table you see first is only for your information; you cannot change entries in here. Editing, in other words delete, change, etc. can only be done in the dialogue window "User". You get this window by selecting "User", "New" or by a double click on an existing user entry. A user must be completely defined. This means ...
... the group the user is assigned to, ... the level the user is given
... the "auto login" facility.
8
... the user alias, ... the user name,
v 3.0
22.05.06
Administrator: Definition
• •
•
5.2.2
The auto login can only be given to one user. Example: If you give the auto login to user "A", the auto login for user "B" is automatically erased. The auto login saves you the effort of typing your name and password after program start.
... the password.
The User Password
The password protects any unauthorised access, and inhibits a login under another person's name.
5.2.3
Therefore it is not listed in the window "User management". For safety reasons, the password is not shown in the input field. Asterisks are displayed In place of characters. The password can be freely selected, or the administrator gives it to a user. The administrator can define a minimum number of characters for the password.
The User Group
Users can be assigned groups. The groups and their names are input in the text field "User group". Up to 1000 groups can be defined. Every single entry can have up to 20 characters. If you click the arrow besides the text field, a list containing the groups defined by the administrator. You select one of these to assign this to the user (Windows style).
5.2.4
The User Level
When assigning a level to a user, the levels cannot be changed; they can only be selected. There are five different levels in addition to the "Admin" level. Each level has its set of rights (cf. User Rights ). You proceed as known from the Windows operation.
5.2.5
Finish Definition
After you have finished the input, you confirm by , , or by "Okay". Then you are back again in the window "User management". Here you can see the last input except for the password. Now you can ...
... abort by the "X" in the title line or by double click on the Mitutoyo-"M", ... finish and store (cf. Store Changes ) via the menu "Edit", ... activate other functions by the menu "User" ("change","store", etc.),
... or double click on some user entry for further changes.
5.2.6
Window Positions
If you want to arrange your windows in a special way, and to keep these positions for the next time, you open the menu "Window"; there you can select "Store positions".
5.3
Change a User Entry
Only the administrator can make changes of user entries. (cf. Operator Management).
22.05.06
In the PartManager you select "User"/"Edit". You get a window without entries.
v.3.0
9
Administrator: Definition
5.4
Then you select "User"/"Edit". You get a complete window "User management" containing all entries, however, without the passwords. These should not be easily visible. You click the user you want to change and select "User"/"change". Or you just double click the user line you have to change. In each case you get the window "User"; here you can modify as necessary (for details, cf. New User).
Store Changes
A user entry does not become effective until it has been permanently stored. If you have made changes in the window "User", these must be stored in order to become valid (cf. New User "Finish Entry"). You confirm by , or via the "Ok" button. Then you come to the window "User management".
You select "Edit"/"finish" in the menu bar and answer the question "Store changes?". In this case, the window "User Management" is closed, and you are back in the PartManager.
Or You select "User"/"store" of the menu bar. The question "Store changes?" has also be answered. Instead of returning to the PartManager, you stay in the window "User Management".
After the changes have been stored, it is not possible to get the original data back (cf. Cancel Changes ). All steps described above are also valid for changes of the user rights you have made.
Note
5.5
Cancel Changes
Changes you have made to the user entries or user rights, can be changed as long as you have not stored them. If you cancel the changes, you can start over again with the data of the last storing. In the menu bar of the window "User management" you select "User"/"Cancel" or "User rights"/"Cancel".
5.6
Delete User Entry
In the window "User management" you click t he user you want to delete.
In the menu bar you select "User"/"Delete" You answer the question "Delete user?". The change can be made invalid; the user is only really erased from the system, if you store the changes (cf. Store Changes ).
10
You have to answer the question "Really cancel changes?". Then the original data are loaded again; your changes are gone.
v 3.0
22.05.06
Administrator: Definition
5.7
Change User Level
Every user has a user level. The level determines the functionality the user can access. The administrator can change the level at any time. You can find the way to modify the functionality a user can access at a certain level at User Rights. In the menu bar of the PartManager you select "User"/"Edit" and you get to the window "User management".
In the menu bar you select "User"/"change" (cf. Change User Entry ). You come to the dialogue window "User".
You click on the arrows in the text field of the "Level". You get a list; here you can click on one of the entries. The text is transferred into the text field "Level". Confirm by , , or by the "Ok" button; then you are back again in the "User management".
You close the window - now containing the changes - by "Edit"/"Finish", and answer the question "Store changes?" and come back to the PartManager.
You can also store the changes via the function "User"/"store". In this case, there is also the question "Store changes?", but then you stay in the user management.
Note Changes only get valid and effective, after you store them (cf. Store Changes ).
22.05.06
v.3.0
11
Further Tasks
6
Further Tasks
6.1
Rescan List
This function should only be used by an experienced user – this is in most cases the administrator. The function can be deactivated by the administrator. This function is used to restore defective part directories or to recover deleted parts. For this, the main index file of the part directory will be build up. These main index files make it possible, to speed up the access of the part files. If there are wrong index files, it can be impossible to get access to the data. In case of using the function "List restore" all index files of the selected part directory will be checked and if necessary restored. You start the function (Rescan List) with the menu bar and the pull down menu. The list will be automatically updated – without any further dialog window –, if you use the function. For details regarding the topic "Available Diskspace" see at the end of the topic Second Partlist.
12
v 3.0
22.05.06
Overview: User Rights
7
Overview: User Rights
7.1
User Rights
The user levels are assigned to the user rights; i.e. the level of a user determines his rights, or better the functionality of the program he has access to. The administrator grants or denies the rights. In the menu bar of the PartManager you select "User"/"Edit", and you come to the window "User management". You select "Edit"/"User rights"; now you have to decide which program package the user has to work with. PartManager GEOPAK STATPAK Task Editor You select e.g. STATPAK and get to the dialogue window "User rights for STATPAK". • • • •
• •
In the left column you find the names of the functions. The five right columns correspond to the five user levels.
Now proceed as follows: Activate (click) the function you want to assign to a level (Example "Delete measurement data").
7.1.1
In the menu bar you click "User rights"/"change" and get to a pull down menu with the five levels (Level 1 bis 5). You click the level where this function should be accessible, e.g. level 2. In the column of "Level 2" where the function "Delete measurement data " is listed, there is a check. Now every user with the level 2 can use this function.
Deny Rights
The procedure is the same as granting the rights; the rights are "toggled", i.e. if they are granted, the next action will deny it, and vice versa.
7.1.2
Dialogue window
It is faster and easier, however, to double click the line of the table where the function can be seen. Then you come to a dialogue window with the user rights for the selected package. Five buttons show which level entitles the user to access the function. You activate or de-activate the function for the level by a simple click (toggle).
You confirm by , , or via the "Ok" button. You can now stay in the "User management", and store the changes via "User rights"/"store" , or ... You terminate the action by "Edit"/"finish". In any case you have to answer the question "Store changes?". You are back in the PartManager.
Note Changes are only valid after they have been stored.
22.05.06
v.3.0
13
Overview: User Rights
If you activate the function "User from system", you should only allocate the Levels 5, 4 and 1. If you allocate the Levels 3 and 2 this action has no effects (cf. Enable User from System
14
v 3.0
22.05.06
Revision Management
8
Revision Management
8.1
Activate Revision Management
8.1.1
Introduction
The purpose of the revision management is to achieve that only tested part programs are used in a current measurement operation. Changes need to be captured in a protocol. This means that the part programs can only be used again in a current measurement operation when the changes have before been tested and captured in a protocol. For MCOSMOS, this implies a completely new structure of the part directory and a modified part administration.
8.1.2
Activate the Function
You can call up the "Revision management" from the PartManager if you have the appropriate MCOSMOS administrator rights and administrator rights f or the operating system.
In the PartManager, click the function "Edit" in the menu "User". In the following window "User administration", activate the function "Revision management" in the menu "Edit".
The dialogue "Revision management" is displayed. Read also the topic "Revision Management: Settings". In the top part of the dialogue you define which actions are to be captured in the audit trail file. In the bottom part of the dialogue you define which actions require the input of the user password. A checkmark in front of the menu entry "Revision management" in the user administration indicates that this function is active. Close the window "User administration".
Close MCOSMOS.
The revision management is only active after restarting MCOSMOS. After the restart of MCOSMOS, you see the menu entry "Revision" in the menu bar of the PartManager.
8.1.3
Start Conditions
Upon the restart of MCOSMOS, the revision management is always in the "Active mode". The part list shows the error message "No access to part directory" because the revision management works with special directories. This means that you have first to create a new part directory using the function "Change directory". This part directory is then identified by the PartManager with the supplement "Active mode".
22.05.06
v.3.0
15
Revision Management
Hint In the active mode, no parts can be created. For creating parts you have to change to the "Edit mode". Include parts in revision management Use the function "Revision" to change to the edit mode for creating new parts or for including already existing parts in the revision management.
8.1.4
Deactivate the Function
To deactivate the function "Revision management",
open the user administration, click again the function "Revision management" in the menu "Edit".
Then close MCOSMOS and restart.
Part directories being used in the revision management cannot be used while the revision management is inactive.
For more information about the revision management, refer to the topics Check Out of Parts Check In of Parts Part List in Active Mode Part List in Edit Mode Part List in Archive Mode Show Audit Trail File
8.2
Revision Management: Settings
8.2.1
Activating the Function
You can call up the MCOSMOS user administration from the PartManager if you have the appropriate MCOSMOS administrator rights. In the PartManager, go to the menu "User" and click the function "Edit".
8.2.2
In the following window "User administration", go to the menu "Edit" and activate the function "Revision management". The dialogue "Revision management" is displayed.
Additional Audit Trail Entries
In the top part of the dialogue you define which actions are to be captured in the audit trail file. User login/logout Three different entries are possible.
16
If the login function is called up, the entry "USR OUT" is captured in the audit trail file.
If the login function is confirmed with "OK", there are two options:
v 3.0
22.05.06
Revision Management
•
•
If the user name and the corresponding password are valid, the entry "USR IN" is captured. If the user name and the corresponding password are invalid, the input "USR NOTIN" is captured. In this case, the protocol uses the user "Nobody". This user account has no user rights.
Check out In the active mode, you can check out a part to edit a part program of the part, as the case may be. In this case, the entry "P CHKOUT" is captured in the audit trail file. Change mode If you want to edit a part program, you need first to activate the edit mode. In this case, the entry "RM SWEDIT" is captured in the audit trail file. When you are working in the edit mode and when you start an audited (released) part program in the repeat mode, you need first to change back into the active mode. In this case, the entry "RM SWACTV" is captured in the audit trail file. Delete part (active mode) When deleting an audited (released) part program, the entry "P DEL" is captured in the audit trail file. The deleted part is copied into an archive. Start GEOPAK part program When starting a GEOPAK part program in the active mode, the entry "GEO RPTPP" is captured in the audit trail file. Furthermore, the part name and directory name are included in the protocol. When exiting the part program an entry will be captured. This entry could either be "GEO ENDPP", i.e. the GEOPAK part program has been finished without errors, or "GEO ERRPP", i.e. the GEOPAK part program has been finished incorrectly. The entries captured in the audit trail file are listed in an overview in the t opic "Audit Trail File Entries".
8.2.3
Password Input
In the bottom part of the dialogue you define the actions that require the password input of the user. These settings increase the safety when working with the revision management. The following actions in the active mode require the password input when you activate the corresponding check box: Check out
Start GEOPAK part program (in repeat mode) Delete part
Change mode (active > edit)
The following actions in the edit mode require the input of the password when you activate the corresponding check box: Check in
22.05.06
Change mode (edit > active)
v.3.0
17
Copy Protection:Dongle
9
Copy Protection:Dongle
9.1
Further Hardware
The software is protected against unauthorised copying by a hardware component; this is called 'hardlock' or 'dongle'. The dongle is placed on the parallel port of your computer; this is the interface where usually your printer is connected to. The dongle is put immediately on this interface, and the printer is then connected to the dongle. Usually the dongle is transparent and does not disturb the printer operation. However, in some cases this might not work as designed. In such a case, you should inform the Mitutoyo technical support. We can either re-configure your dongle, or provide a different type of dongle: as an alternative to the one connected to the parallel port, we could provide one connected to a serial port, or even a card which is inserted into a f ree slot of your computer.
9.2
Read Dongle Data
If you need more MCOSMOS options than you currently have, these options must be bought; then the dongle can be re-programmed. For this, use the function "Read out dongle data" to read the current software attributes of the dongle. Store these data in a file and send the data, e.g. on a disk, to your Mitutoyo partner. It is not necessary to dismantle and dispatch the dongle itself. Your operations with the capabilities you have had before will not be interrupted. You can also send the file per e-mail or in form of a printout. In the latter case, however, you must take care that you re-enter the answer correctly. Proceed as follows Go via the PartManager and the functions "User", "Edit", "Copy protection" and "Read out" and you get to the dialogue "Read out". Start the ProgramManager and use the functions "User", "Edit".
The MCOSMOS-Program "User administration" starts. Via the menu bar "Copy protection" and "Read out" you get to the dialogue window "Read out".
The dialogue "Read out" provides
the serial number of the dongle, the directory path in which the file is stored with the current software attributes
and the file containing the current software attributes. When clicking the button "Execute", the file is copied with the current software attributes into the selected directory. The file name consists of the serial number of the dongle and the file name extension "RTC".
9.3
Program Copy Protection
With the function "Program copy protection ", the new software attributes are read into the dongle. These are, however, only available after a restart of the complete software, i.e. it is not sufficient to restart, for example, only GEOPAK to make a new GEOPAK attribute operative. A restart of the PartManager is mandatory.
18
v 3.0
22.05.06
Copy Protection:Dongle
The data to be programmed into the dongle are transferred via a file. This file is available from your Mitutoyo partner. The file name consists of the serial number of your dongle and the file name extension "RTU". To get the file, you must execute the function "Read Out Dongle Data".
Proceed as follows Start the PartManager and proceed via the functions "User", "Edit".
The MCOSMOS-Program "User administration" starts.
Use the menu bar "Copy protection" and "Programming" to get to the dialogue window "Programmingi".
The dialogue "Programming" provides
the serial number of the dongle, the directory path in which the file with the new software attributes is expected and
the file with the new software attributes.
Example: You have received your new data on a disk. Select in the dialogue window "Programming" (e.g. using the button "Search") drive "A:". Confirm, e.g. using "Open". When clicking the button "Execute", the dongle is programmed with the new software attributes. The dialogue window "Programming" indicates if the programming has been successfully completed. To close the dialogue window "Programming", click the button "Exit".
22.05.06
v.3.0
19
View more...
Comments
