Adhesive

ADHESIVES

ADHESIVES

INTRODUCTION Materials employed employed for sticking, or adhering, one surface to another are known as Adhesives. Forms are liquid, paste, powder and dry film. fi lm. The commerc commercial ial adhesives adhesives include include pastes; glues; proxylin cements; rubber cements; synthetic synthetic rubbers; and natural mucilages. Adhesives are characterized by ---1.

The degr egree of ta tack, ck, or sti sticki ckine ness ss,,

2.

By str stren eng gth of bo bond nd aft after se settting ting or dryi drying ng,,

3.

By rapidity of bonding

4.

And by durability.

CLASSIFICATION

Adhesives can be grouped in five classifications based on chemical composition. 1.

Natural adhesives

2.

Casein-latex adhesives

3.

Thermoplas lastic ad adhesives

4.

Thermosetting ad adhesives

5.

Plastics

NATURAL ADHESIVES

Natural adhesives can also be classified into three parts--Casein Animal based Plant based

CASEIN

Casein is a natural polymer from skim milk proteins used in some water-based adhesives. It represents a small but important percentage of all natural polymers used in water-based adhesives. The casein formulations are highly soluble in alkaline and water, they thus wash very cleanly off of the glass containers. Casein can be cross-linked to give excellent water resistance.

CASEIN - COMMON APPLICATIONS

Casein is now used as: An adhesive in construction for wood working applications. Packaging industries for breweries, wineries and packagers where refrigerated products are packaged.

ANIMAL ADHESIVES

Fish

gelatin:

Sheets

of amber clear fish gelatin. Should first be soaked then dissolved in a double boiler. Imported from Italy, sheets are 9" x 2 1/2".

FISH GLUE Fish

glue

A high-tack adhesive, light tan color. Free of salt but will shrink upon drying. Adding 10% glycerin (found in Chemical section) will give greater flexibility and reduce shrinkage. This product is commonly used as an adhesive in furniture restoration where long drying times are preferred, and has excellent resistance to solvents and heat. Permanently remoistenable with water:

GELATIN --- PHOTOGRAPHIC GRADE

Gelatin

Virtually free of mineral contaminants suitable for conservation of photographs and can be used for the preparation of photo sensitive coatings.

GELATIN U.S.P

Gelatin USP

Often used as a paper size, pharmaceutical grade, granular.

PLANT BASED ADHESIVES

Cellulose powder

A purified microcrystalline cellulose powder, partially-depolymerized and derived from fibrous plants. Cellulose is a white, odorless, freeflowing powder that is virtually free of organic and inorganic contaminants. It is insoluble in water, in dilute acids, and in most organic solvents; practically insoluble in sodium hydroxide solution (1 part in 20).

FUNORI

Funori

A polysaccharide mucilage made from the seaweed Gloiopeltis, which is harvested from natural populations in Japan. To prepare cut up 6g funori (the web is tan to orange-brown in color). Soak in 200cc (just shy of one cup) water overnight. Cook this mixture in a pan over low heat until the seaweed is dissolved, Do not boil. Cool. Strain the solution through a Japanese silk strainer or a cotton cloth. The solution will be light drab tan in color and feel "slimy". Store in refrigerator when not in use. Warm up prior to use.

RICE STARCH

Rice

starch

For the same applications as wheat starch. Forms a transparent film. Unmodified, requires cooking. Has excellent water retention properties.

WHEAT PASTE

Wheat paste

A general purpose bookbinding adhesive for use on paper, binders board and leather. Suitable for paper-to-paper adhesion such as book plating, hinging, repairing torn pages and corners. Precooked powder; dissolves easily in cold water. Can also be mixed with PVA adhesives or methyl cellulose. Wheat Paste is acidic, pH 6-6.5 (measured in a 70% slurry). To buffer it, add 10% (by weight) of  calcium carbonate (found in the Chemical section).

WHEAT STARCH

Wheat starch

For

lining and repairing works of art on paper. Holds better than rice starch but is not as strong as wheat paste. An unmodified food grade starch that requires cooking. Has a high water holding capacity, pH 5-6.5 (measured in a 70% slurry). To buffer it, add 10% (by weight) of  calcium carbonate (found in the Chemical section).

Bituminous Adhesives Bitumen Forms

of Bitumen

1. Bitumen emulsion 2. Blown Bitumen 3. Cut-back Bitumen 4. Plastic Bitumen 5.

Straight

run Bitumen

Bitumen Sheet Roofing Adhesives Polymer-modified Bitumen sheets SBS-High

Performance Sheets

APP-High Performance Sheets

Thermoplastic Adhesives

Synthetic

rubber based adhesives

Themoplastic Adhesives In general, thermoplastic adhesives have low/medium shear strength and may suffer from creep at high loading. They have good resistance to oils but poor resistance to water. Thermoplastic adhesives include polyvinyl acetate (PVA), polyvinyl alcohol (PVA), polyacrylates, polyester acrylics, acrylic solvent cement, cyanoacrylates (superglue), silicone resins, polyamides and acrylic acid diesters .

Fevicol-SH It is a synthetic adhesive in white milky viscous paste. features. How to apply. Packing. Uses: bonding wood, plywood, laminates, particle boards, block boards. pencil mfg., sports goods, paper labeling, tube, wallpaper, carpet mfg. also recommended for bonding porous materials ( paper, cardboard.)

Fevicol-Marine is used in bonding furniture. exposed to water or placed in high humid areas. Features .

Application. Uses: bonding wood, plywood, laminates, particle boards, block boards. used in all types of furniture works in areas of high humidity.

Fevicol-SpeedX

More

quick and water resistant.

Features.

Application. Uses : in time bound projects. Kitchen, wall units, bathroom (water exposed is high.) bonding wood, plywood, laminates, particle boards, block boards, veneers,

Fevicol-DDL

Features How to Apply Uses Packing

Polyvinyl Acetate Adhesives Supplied as an emulsion in water, for porous materials, especially wood. Shear strength is good. Resistant to oil . Poor resistance to water. Low heat tolerance. ( White glue) Materials Bonded: Wood, Metal, glass, ceramics

Fevicol Nailfree It eliminates the need for nails & screws. Features. Application. Uses: bonding wood Patti, beading in and windows.

furniture doors

bonding laminates on table and partition. veneer inlay and parquet flooring. fast assembly of wood joints. bonding nonporous materials like metal particle board ceramic marble to wood. repairing of carvings.

Fevicol SR 998 it is used in furniture works and where it is difficult to apply pressure. Features. Application. Uses: for bonding vertical and decorative laminates to wood and plywood. rubber, glass, leather, foam, fib re, metal, gl ass, ceramic, canvas. duct insulation ( nitryl rubber to metal.) under duct insulation.

Fevicol SR X-Pres Formulated for tough conditions. Features. Application. Uses: for bonding vertical and decorative laminates to wood and plywood. rubber, glass, leather, foam, fibre, metal, glass, ceramic, canvas. duct insulation ( nitryl rubber to metal.) under duct insulation.

Fevicol Foamfix. Free from harmful benzene and used to bond foam. Features. Application. Uses : foam/ rubber to foam. upholstery (rexine to foam/rubber foam), wood/plywood to foam, rexine. metal to foam or rubber foam.

Advantages of Rubber based Adhesives Fast Drying Excellent initial tack & bonding Good open time Excellent room temperature contactability Excellent bond adhesion to a variety of substrates like corative laminates,plywood,particle board, leather, metal etc. Excellent heat resistance

Disadvantages Poor resistance to elevated temperatures. Fair to poor resistance to chemicals. Poor resistance to ultra violet light & oxidation.

 Advantages

Disadvantages 1. Provides large stress-bearing area. 2. Provides excellent fatigue strength. 3. Damps vibration and absorbs shock. 4. Minimizes or prevents galvanic corrosion between dissimilar metals. 5. Joins all shapes and thicknesses. 6. Provides smooth contours. 7. Seals joints. 8. Joins any combination of similar or  dissimilar materials. 9. Often less expensive and faster than mechanical fastening. 10. Heat, if required, is too low to affect metal parts. 11. Provides attractive strength-toweight ratio. 1. Surfaces must be carefully cleaned. 2. Long cure times may be needed. 3. Limitation on upper continuous operating temperature (generally 350F). 4. Heat and pressure may be required. 5. Jigs and fixtures may be needed. 6. Rigid process control usually necessary. 7. Inspection of finished joint difficult. 8. Useful life depends on environment. 9. Environmental, health, and safety considerations are necessary. necessary. 10. Special training sometimes required.

 Adhesives used in home school and ofiices

W hite glue

Used for  Art & Craft activities. Used in activities like collage making, bread crafting, papier-mâché & other craft techniques. Bonding/sticking paper, cardboard, thermocole, fabrics, wood, plywood, etc.

Features & BenefitsSynthetic white adhesive. Ready to use. Strong bonding. Simple and convenient to use. Convenient pack sizes to meet different quantity requirements.

Paper glue Used for sticking paper to paper.

Features & BenefitsExcellent paper to paper bonding.  Available in different fragrances & colors. S Attractive packaging. Easy dispensing Packing made simple & convenient to use especially by children. Packing120ml (Lime, Orange, Green  Apple, Cologne, Blueberry, Mango, Waterlily and Sandalwood). 25ml Toy pack-lime (Lion, Monkey, Squirrel and Owl). 30ml (Strawberry, Orange and Cologne).  Assorted jar pack of five different fragrances.

Quick instant glue

Used for bonding most plastics, rubber, ceramic, metal and porous materials like wood, leather. Used for repairing broken plastic parts,  joining footwear, leather articles, making µO` rings. Bonding/sticking paper, cardboard, thermocole, fabrics, wood, plywood, etc.

Features & BenefitsBonds in an instant. W ithstands temperature from -40°c to 90°c. Clog resistant nozzle, preventing wastage. Packing500mg, 1g, 2g, 3g, 5g, 20g.

Used for bonding most plastics, rubber, ceramic, metal and porous materials like wood, leather. Used for repairing broken plastic parts, joining footwear, leather  articles, making µO` rings.

Glue stick

Bonding/sticking paper, cardboard, thermocole, fabrics, wood, plywood, etc. Features & BenefitsBonds in an instant. W ithstands temperature from 40°c to 90°c. Clog resistant nozzle, preventing wastage. Packing500mg, 1g, 2g, 3g, 5g, 20g.

Epoxy Putty

Used for sealing, joining, repairing and insulating ferrous and non-ferrous metals, glass, asbestos, concrete, ceramics, etc. Used for sealing leakage in flush tank, wash basin pipes, radiators, etc. For joining chipped parts of ceramic, metal patterns, for repairing and insulating cable terminal entry into switch boxes, transformers, etc. Can be used as a craft medium (especially M-Seal W hite) for making decorative artifacts, murals etc. Features & BenefitsMouldable into different shapes. Cures to hard mass for long lasting sea. Can be shaped, drilled, filed, sanded, painted upon so as to suit the type of surface applied on. W ithstands temperature upto 120°C.  Available in different variants. M-Seal General Purpose. M-Seal Phataphat (for faster curing). M-Seal white (for a white finish). Used for sealing, joining, repairing and insulating ferrous and non ferrous metals, glass, asbestos, concrete, ceramics, etc. Used for sealing leakage in overhead/ flush tanks, pipes. For filling small holes and to secure wall plugs. Sets faster hence ideal for emergency applications. Can be used as a craft medium (especially M-Seal W hite) for making decorative artifacts, murals etc.

Features & BenefitsConvenient to use, j ust cut knead & apply. Sets in 20 minutes, ideal for emergency applications. Cures to hard mass for a long lasting seal. Can be shaped, drilled, filed, sandpapered, painted upon so as to suit the surface applied on. withstands temperature up to 120°C.

Used for sealing leakages between the hose pipe and wash basin, filling gaps between the wash basin and tiles, and stopping leakage in asbestos roofs and radiators. It can also be used to fill the gaps that occur between switchboards and the walls they are affixed to.

Features & BenefitsM-Seal Wet Set is a do-it-yourself product (DIY). SIt can be moulded into any desired shape by hand. Can be sanded, drilled, filed and painted upon after curing. M-Seal Wet Set can also be used to make murals and build up chipped vases.

Used for bonding metal, ceramic, marble, asbestos, granite, PVC, ivory, glass, wood, leather, rubber. Seal cracks in engine, machine blocks. Fixes bolts on engine parts. Impeller vane bonding. Fixing cylinder sleeves. Features & BenefitsProvides strong durable bond. Bond withstands temperature from -50°C to 120°C.  Available in different variants. Normal setting (EPX/ A1). Rapid setting (EPX Rapid), sets in 5 minutes.

Fevitite Super Fast is a two component fast setting super  strength epoxy adhesive that bond virtually anything to anything in 2-3 hours.

Features & BenefitsExcellent adhesion to a wide range of  substrates, virtually anything to anything. High cohesive strength. Good Heat/Solvent/Chemical resistance. Negligible shrinkage on curing and hence good dimentional stability. Good shock resistance. Long lasting bond

Epoxy adhesive Fevitite Vertifix is a two-component, high strength construction epoxy adhesive. Spot bonding large format tile and stone on vertical surfact. For either interior or approved exterior applications. Features & BenefitsPermanent bond. Non-sag consistency. Shock and Vibrator resistant. Quickly and easily adjust stone veneers. Non-staining. NUnmatched productivity and installation speed of tile and stone veneers.

PVC Insulation Tape

Dr. Fixit Silicone Sealant

Steel gripinsulation of electrical wire joints. Color Coding (3 Phase wiring). Insulating cable lugs in meter panels. Insulating cable joints in submersible pump. House hold electrical appliances. Features & BenefitsIndia`s first Insulation tape with an ISI mark. Self-extinguishing, does not allow source of fire to spread. Waterproof, weatherproof and non-ageing. Provide long lasting insulation. Offers firm grip and protects electrical conductors from the effect of acids, alkalies and oils. Maintains insulation in different usage and temperature conditions.

Dr. Fixit Silicon Sealant comes in 2 variants:General Purpose -  Acetic Cure Silicon Sealant for windows. Metal and Glazing purpose - Neutral Cure Silicon Sealant. Applications:Glass and Ceramics. Metal and painted surfaces. Non oil wood. Sealing aluminum/ glass window frame joints, fixing glass into aluminum frames. Bathroom fittings, Plastic and Tiles. Features & BenefitsFast curing silicone sealant. very strong adhesion. High elasticity.

Contact Glue

Used for bonding leather, rubber, metal, wood, canvas. Used to bond rexine to foam/ wood./ cardboard. Used to stick glass to ceramic, metal, canvas, PVC tiles to floors etc. Joins rubber bead to vehicle door, repairing leather goods.

Features & BenefitsProvides flexible bond, resistant to water, oil and alkalis. Does not contain harmful benzene thus safe to work with. PackingPTube pack - 10ml, 20ml, 50ml.

Transparent and non-staining multipurpose adhesive. Quick drying. Safe to work.

Features & BenefitsIt is single component, clear/transparent versatile synthetic adhesive. It is suitable for various household repairs/servicing and Manufacturing job. Joins glass, ceramic, wood, leather, rubber, cork, paper, cloth most plastics such as acrylic,  ABS. Packing20 ml.

Maintenance Spray  Adhesive dissolver 

Cleans: Zorrik 88 loosens and cleans surfaces from dirt, rust, grime, caked grease and oil. It dissolves most adhesives enabling easy removal of labels / stickers. Lubricants: Zorrik 88 is an effective lubricant. It penetrates easily and rapidly in to the minor  gaps of tenaaciously held moving parts. It helps to reduce friction and enables easy movements of metal parts. Penetrates: Zorrik 88 protects rust to metal bonds, crevices and pores through capillary actions and loosens / frees jammed, frozen and rusted metal parts, bolts, nuts, shafts and bearings. Displaces moisture: Zorrik 88 penetrates and goes under surface moisture and forms a protective film between moisture - induced short circuits in electrical contacts. Features & BenefitsCan perform multiple functioal tasks. Easy to use (D.I.Y. Product). It is non staining and leaves no gummy residue. It is easy to use and non messy. It has 88 uses & more.

Fevicol Kwikgrab is a high strength, multipurpose adhesive to bond almost all building materials. Features & BenefitsGives instant grab and form a long lasting elastic bond. Ideal for use in construction industry. Fast drying to ensure strong bond. Easy to use and apply. Packing :300ml.

Synthetic Resin  Adhesive used for bonding wood, plywood, laminates, veneers, particle boards, block board/hard board & MDF to each other. Ideal for woodworking. Features & BenefitsSynonymous with strong bond in wood and furniture industry. Unsurpassed bonding strength. Resistant to water and heat. Gives high coverage. Packing50 gm, 125 gm, 250 gm, 500 gm. 1 Kg, 2 Kg, 5 Kg,10 Kg,15 Kg, 20 Kg, 30 Kg, 50 Kg

Synthetic Resin  Adhesive with a superior resistance to water, Fevicol Marine could be used for bonding wood, plywood, laminates, veneers, particle boards, block board/hard board & MDF to each other.

Features & BenefitsFevicol Marine is a specialised water resistant adhesive that protects furniture from water. Its special chemical properties give superior bonding with marine (BW P) ply to laminate. 48-hour continuous cold water resistance. 1-hour boiling water resistance. Packing1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 50 kg.

Synthetic Resin  Adhesive with faster drying time, Fevicol Speedx could be used for bonding wood, plywood, laminates, veneers, particle boards, block board/hard board & MDF to each other. Features & BenefitsFast setting adhesive. Ideal for time bound projects. Saves time, saves money. Packing1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 50 kg.

Fevicol W R A is India`s 1st Wood Reiforced adhesive. It could be used for bonding wood, plywood, laminates, veneers, particle boards, block board/hard board & MDF to each other.

Features & BenefitsContain wooden particles for extra strengths. Higher coverage Wood coloured for better finish Packing1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 50 kg.

PV Ac W hite Glue for Wood to Wood Joining W ith a High Initial Tack, Mr. Bond HIT could be used for 

bonding wood, plywood, laminates, veneers, particle boards, block board/hardboard & MDF each other.

Features & Benefits Adhesive with specialized HIT (High Initial Tack) formulation. Special formulation for better coverage/spread ability. New International Packing. Packing1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 50 kg.

Wood

Grip is a high viscosity adhesive with an advantage of  better grab. Because of its unique "W OODGRIP W ITH A TIGHT GRIP" feature grip remain till the end.

FeaturesHigh viscous adhesive - symbol of strength. 10-15% more coverage.  Attractive international packaging.  ABetter grip. UsesFor bonding wood, plywood, laminates and veneers, particle board, Block board, Hardboard, MDF to each of the substrates. Pencil mfg. Sports goods, paper labelling, Paper Tube, Wall Paper & Wooden Flooring. PackingIn plastic Containers 1 Kg, 2 Kg, 5 kg, 10 kg. In Carboys 20 kg, & 50 kg

Used for bonding plywood, MDF, particle board, laminate and veneer to each other, good for woodworking.

Features & BenefitsSynthetic resin adhesive. Can be mixed with sawdust and used for filling knots and holes in timber and wood. Economical adhesive for mass produced furniture with quality assurance from Fevicol. Packing125g, 250g, 500g, 1 kg, 2 kg, 5 kg, 20 kg, 50 kg, Pouch - 500g, 1 kg.

Used for bonding wood, plywood, laminates, veneers, particle boards, & MDF to each other.

Features & BenefitsSynthetic rubber adhesive. High viscosity. Single side application. Value for money. Packing1 kg pouch pack. 125gm, 250gm, 500gm, 1kg, 2kg, 5kg, 20kg, 50kg. container 

Contact  Adhesive for Laminate and Veener Pasting Used for bonding laminates to wood/plywood/MDF/particle boards and also used for car and bus rooftops.

Features & BenefitsFaster bonding rubber based adhesive for plywood and laminates. High heat resistance. W herever nailing/taping/applying pressure is not possible, SR 998 gives excellent results. Speed in furniture making. Handling strength achieved in 30 minutes. PackingTin - 100 ml, 200 ml, 500 ml, 1 litre , 2 litres, 5 litres. Drum - 25 litr.

 A Premium quality adhesive specially formulated to tough condition.

Features & BenefitsMore resistant to heat and sunlight. Faster Drying (3-5 minutes). Saves time and labour. Used for the surfaces where it is difficult to apply pressure. PackingIn tins 200ml, 500ml, 1 ltr and 5 ltr. In drum 25 ltr.

Hotmelt & PU based adhesives Used for bonding pre coated PVC,  ABS, polyester, resin impregnated paper, solid wood, veneer edges to MDF, particleboard and other wood based panel products with automatic machine. Working temperature 180°C ±

190°C.

Special information - Suitability depends upon individual characteristics of edging material and how it is primed.

Features & BenefitsHigh softening point 110°C + 5, hence heat resistant up to 90°C + 5. High bond & peel strength. High initial tack with long open time.  Also suitable for manual edge banding machine. Packing25 kg bag

Fevicol 1K PUR is single component moisture curing polyurethane adhesive. Applications:Bonds wood to wood ± W indows and door assembly, staircase. Plywood, rigid plastics, foams, concrete and ceramics. Features & Benefits:Very high water resistant. Can be used in area exposed to moisture and water. Conforms to EN 204/D4 and J AS (BW SD) standards for boiling water  resistance. Dries fast, gives strong bond. Easy to use and apply. Packing Unit:Plastic Bottle: 500g.

Contact  Adhesive for Upholstery Synthetic Rubber  Adhesive. Introducing Fevicol Foamfix with faster bonding to your expectation. Specially for making superior quality sofa, chair, mattresses etc. Applications:Foam / rubber foam to foam. Upholstery ( rexine to foam / rubber foam ), wood / plywood to foam / rubber foam / rexine. Metal to foam / rubber foam. Features & BenefitsFree from benzene - Non hazardous to health. Soft on foam, keeps foam shape intact. Faster bonding. Excellent spreadability. Mild smell. Economical in long run. Packing:500ml, 1ltr, 2ltr, 5ltr, 25ltr  Bulbond SR 55 is a synthetic rubber based solvent containing contact adhesive specially designed for Upholstery and flooring segments. It exhibits immediate bond strength and has good resistance to water and aging. This adhesive can be applied by brush, applicator, spray gun etc. Application AreaBulbond SR 55 is used in Upholstery to bond variety of substrates like PU-Foam/Rubber Foam to PU-Foam, Rexine to PU-Foam, Wood/Plywood to PU-Foam, Coir to PU-Foam etc. It is also used to bond PVC flooring to Mosaic /concrete substrate in Flooring segment.Color: Light Brown liquid. Product featureFree from Benzene - Non-hazardous to health. Multipurpose adhesive. High Tack. Excellent spread ability. High coverage specially on flooring ± 125 sq ft per litre. (depending upon the floor  conditions.). Mild smell. Packing1 ltr, 5 ltr and 25 ltr.

Glue for Wall Paper and Floor Covering Used for PVC flooring and woven carpets.  Also for bonding UFoam / rubber foam / rexine / coir / canvas to each other and also to wood / plywood / metal. Product also finds usage in car & bus Interiors. Used by Roadside Cobbler for repairing purposes. Features & BenefitsMulti purpose adhesive. Ideal viscosity gives superior coverage. Excellent bonding strength. Does not contain benzene. Packing100ml, 200ml, 500ml, 1 litre, 2 litres, 5 litres. Drum - 25 litres.

FEVICOL VC-31 is water based synthetic resin adhesive for flooring application. It is India¶s first synthetic Resin  Adhesive , which has been specially formulated for easier  bonding of PVC flooring material.

Features & BenefitsOne sided application, saves time and labor cost. No smell, Eco friendly. More strength compare to solvent based adhesive. Less application time compare to solvent based adhesive. Best option to work in non ventilated room. Suitable for both Tiles and Rolls. Excellent bonding in wooden flooring. UsesFlooring- Mosaic/Concrete. Vinyl Carpet(Rolls and tiles). PVC/Karara/Rekwin carpet. Marine Ply ± PVC carpet. One surface should be porous. Packing1 kg, 5 kg

Solvent Cement for CPVC Pipes Used for joining and plugging leakage in rigid PVC pipe joints. For joining telecom cables, PVC drainage pipes, for industrial pipelines.

Features & Benefits-Specially formulated PVC solvent cement. Viscous liquid form, does not drip down in vertical pipe joints. W ithstands temperature from -30°C to 90°C. Packing--20ml, 50ml, 200ml, 500ml, 1 litre

Used for joining and plugging leakage in G.I. pipes.

Features & BenefitsStains on hands can be removed easily. Sets flexibly, pipe joints can be opened again if  required. Sets in 10 minutes, pipe can be put to use fast.  Available in variants - black and white (ideal for open pipe fittings). Packing10g pouch, 30g, 50g, 100g, 200g, 500g.

High performance Tile Fixing Adhesive for internal w all/ floor &external Flooring & Tile-on-Tile Applications.

Dr. Fixit Fevimate XL is a blended polymer modified cement based powder tile adhesive. It gives excellent bond on cementitious surfaces like,concrete, plaster, etc.Dr. Fixit Fevimate XL forms a waterproof barrier between two surfaces and has excellent `grab` properties. Area Of ApplicationFor fixing all types of tiles on internal wall / floor, external floor & tile on tile applications.  As well as swimming pool tiling applications. Features & BenefitsReady to use, needs only mixing with water. Excellent adhesion, low shrinkage. Suitable for indoor and tile on tile applications. Sufficiently flexible to accommodate physical & thermal movements. Needs no curing, needs no hacking or mechanical key on the surfaces. Floors can be used after 24 hours. Curing not required. Soaking of tiles & backing of surface not required.

Tile Fixing Solutions

Precaution O Linitations Always add powder to water and not water to powder. Do not add more water than recommended. Do not add sand or cement at site. Before doing tile-on-tile application, ensure that the original tiling surface is in sound condition. In case of undulations in the existing floor, rectify the same before applying Dr. Fixit Fevimate XL. Do not use for vertical cladding of heavy tiles. Strictly not recommended for the direct use on gypsum plaster, paint, wood & metal. Technical Information Packing 5 kg, 20 kg, 25 kg, 30 & 50 kg. Appearance Mix ratio Open time Pot life Coverage

: Cement Grey Powder : 3 : 1 (by vol). : Approx. 10 - 15 minutes at 30oC : approx. 2 hrs at 30°C : 60 - 70 sqft/25K g. Bag at 3 mm thickness, 30 - 35 sqft/25K g bag at 6 mm thickness

Trafficable time Shelf Life

: 24 hrs (max.) : 12 Months when sealed pack stored in cool & dry place

White

tile adhesive for marble and glass tiles

Dr. Fixit Fevimate W M A is a white colour polymer modified cement based tile adhesive specially designed for heavy duty tile applications like marble fixing and glass tiles on internal/external vertical surfaces. This tile adhesive has excellent waterproofing property.

Area Of Application All applications of Marble, Glass tiles, Glass mosaics on Internal/ External wall or floor, Swimming pools, Bathrooms, Commercial Spaces,Residential Spaces and Exterior Spaces. Features & BenefitsW hite base ensures that the original colour of the marble and glass tiles stands out. Ready to use, needs only mixing with water. Excellent adhesion, low shrinkage. Excellent waterproofing characteristics. Sufficiently flexible to accommodate thermal & physical movements. Suitable for indoor and outdoor applications. Needs no curing and soaking of tile. Needs no hacking or mechanical key on the surface. Heavy Duty Tile Fixing Adhesive for Vertical Cladding & Tile-on-Tile Applications.

Dr. Fixit Fevimate TL is a blended powder polymer modified cement based tile adhesive specially designed for heavy duty tile applications like granite, mosaic on internal/external vertical surfaces. This highly flexible adhesive also has an excellent waterproofing ability. Dr. Fixit Fevimate TL is suitable for fixing large format Ceramic,vitrified tiles Glazed surfaces,Natural Stones, etc., on a new substrate & tile on tile applications.

Area Of ApplicationFor heavy duty vertical cladding like natural stones & large format tiles on internal/external applications and tile on tile applications as well as the swimming pool tiling applications. Features & BenefitsReady to use, needs only mixing with water.

Heavy Duty Tile Fixing Adhesive for Vertical Cladding & Tile-on-Tile Applications.

Dr. Fixit Fevimate TL is a blended powder polymer modified cement based tile adhesive specially designed for heavy duty tile applications like granite, mosaic on internal/external vertical surfaces. This highly flexible adhesive also has an excellent waterproofing ability. Dr. Fixit Fevimate TL is suitable for fixing large format Ceramic,vitrified tiles Glazed surfaces,Natural Stones, etc., on a new substrate & tile on tile applications.

Area Of ApplicationFor heavy duty vertical cladding like natural stones & large format tiles on internal/external applications and tile on tile applications as well as the swimming pool tiling applications. Features & BenefitsReady to use, needs only mixing with water. Excellent adhesion, low shrinkage. Excellent waterproofing characteristics. Suitable for indoor and outdoor use. Sufficiently flexible to accommodate Thermal & physical movements. Needs no curing and soaking of substrate or tile. Needs no hacking or mechanical key on the surface.

Dr. Fixit Fevimate TG tile grout is cement based, enhanced by adding siliceous fillers, UV stable pigments and additives.

Tile Grouts

It has excellent adhesion to all types of tiles and is impermeable to running water. Dr. Fixit Fevimate TG can be used for joint filling of ceramic tiles, mosaics, marble, resin bonded marble, natural stones, terrazzo tiles and swimming pool tiling.

Area Of Application All indoor & outdoor tiling joints. Features & BenefitsReady to use - only addition of water at site. Excellent adhesion with all types of tiles. Forms impermeable joints. Non shrinking. UV stable hence suitable for outdoor application. Method of ApplicationThe tiling joint should be made clean, dry and free from all contamination.  Add 2.5 parts of powder to 1 part of water to get homogeneous mix and desired consistency.  Addition of water shall be adjusted as per the climatic conditions. Fill the prepared paste into the tiling gaps and remove excess material by tooling. Leave the surface for 24 hours.

DR. FIXIT FEVIM ATE P A is a liquid additive to be mixed with cement for fixing ceramic, marble & terrazzo tiles on new surfaces. It is an easy to use liquid polymer additive ,which when added to ordinary Portland cement and sand at site gives a high strength, impermeable mortar for fixing tiles.

Area Of ApplicationFor fixing wall & floor tiles like glazed / unglazed ceramic, porous / non porous vitrified tiles, marble & granite on internal /external wall & floor surfaces. Features & BenefitsStrong bond. Fast fixing rate. Tiles fixed dry, directly - no soaking, no mess. Thin bed of 3-6 mm.