Abstract

UNIVERSITI TEKNIKAL MALAYSIA MELAKA___________________________________________BMFA

ABSTRACT All bachelor degree students are required to undergo industrial training for 20 weeks as part of their curriculum to complete their 4 year course for the Bachelor of Manufacturing Engineering. The attachment will be during the 6th semester of their study. During the 20 weeks period of training, students will be supervised and monitored their training by two nominated supervisors. For my industrial training, I did at United Plantation Berhad Ulu Bernam Engineering Department which situated at Ulu Bernam. It is an oil palm extracting company. This company has been established since 1906. The factory was established on 1932. This factory process about 80 tons of fresh fruit bunches per hour. This company also has it own refinery which is Unitata Berhad. I was assigned to the workshop section which my supervisor is Mr. Periannan and my academic supervisor is Mr. Sivarao. For the first month I learn about the basic operation in manufacturing. That includes the use of oxyacetylene cutter and arc weld. Then for the second month I was assigned to the locomotive section where I learn about the operation of locomotive, hydraulic system and gearing system. Third month I was assigned to the factory section which I was able to learn about the operation of producing the crude oil palm and kernel. On the forth month I was assigned to the mechanical section where I learn about tractors, heavy machinery and overhaul engine. For the final month I was assigned to the machinery section where was able to sharpen my skill in operating the lathe machine, learn about shaping and milling machine.

II

UNIVERSITI TEKNIKAL MALAYSIA MELAKA___________________________________________BMFA

ACKNOWLEDGEMENTS Firstly I like to thank you to my family for allowing me to take Bachelor Degree in Manufacturing Engineering. Then my gratitude goes to both my academic supervisor and industrial supervisor for the guidance trough out the industrial training. I would like to thanks to the United Plantations Berhad Ulu Bernam Engineering Department for allowing me to join the company temporally for my industrial training. My gratitude goes to the Chief Engineer and Assistance Engineer. Then I would like to thank to the Dean of the Manufacturing Faculty and all the staff that involve directly or indirectly in the industrial training. Finally I was able to complete this industrial training and the final report with the help of the instructor that is the employers of the company.

III

UNIVERSITI TEKNIKAL MALAYSIA MELAKA___________________________________________BMFA

TABLE OF CONTAINS Page ABSTRACT

II

ACKNOWLEDGEMENTS

III

TABLE OF CONTAINS

IV

CHAPTER 1: Introduction

1

1.1

Briefing to Industrial Training

1

1.2

Objective of Industrial Training

1

1.3

Objective of this report

2

1.4

Important of industrial training to student

2

1.5

Scope of industrial training

3

CHAPTER 2: ORGANIZATION BACKGROUND

4

2.1

Company history

4

2.2

Company Facts

7

2.3

Organization chart

8

2.4

Organization environment policy

9

2.5

Occupational safety and health policy

10

2.6

Quality policy

11

CHAPTER 3: TRAINING ACTIVITIES

12

3.2

Fruit cages and rail line in marshal field

19

3.3

Locomotive section

25

3.4

Factory section

32

3.5

Vehicle mechanics

63

CHAPTER 4:CONCLUSION AND RECOMMENDATION

72

4.1

Conclusion

72

4.2

Recommendation

73

CHAPTER 5: REFERENCE

75

CHAPTER 6: APPENDICES

76 IV