MODEL: 898G
2-way car alarm system with engine start
MANUFACTURED BY:
Steelmate Co., Ltd http: //www.steel-mate.com E-mail:
[email protected] All rights reserved The trademark, patent and copyright owned by Steelmate Co., Ltd. The right to change design and specification for improving the product is reserved
MODEL: 898G
USER'S MANUAL
Two way car alarm system with engine start
10 reasons to choose Steelmate 1. Stable, reliable and professional 2. User friendly innovative design 3. More than 100 engineers in the company 4. More than190 design and utility patents in possession 5. Complete range of products for cars and commercial vehicles 6. Nearly 20 years leading experience in the Chinese automotive industry 7. The preferred product and brand in more than 60 countries 8. The first Famous Trademark in the automotive industry recommended by SAIC China 9. ISO 9001 and ISO/TS16949 certified company 10. Products have FCC, CE, E-mark approvals
Warranty I. The unit is warranted for a limited period from the date of purchase. In the unlikely event of a defect arising in this product when used in accordance with the manufacturer's instructions, the parts would be repaired or replaced free of charge. l It is required to show warranty card when making any warranty claims. l The model and serial number on unit must be the same as the information on the warranty card. II. This warranty is non-transferable and is automatically void if: l The original purchaser has not completed the warranty card. l The unit's serial number is defaced, missing or altered. l The unit has been modified or used in a manner contrary to its intended purpose. l The unit has been damaged by accident, unreasonable use, neglect, improper installation or service. III. The warranty does not cover damage to the unit caused by installation or removal of the unit.
Steelmate warranty card User: Tel: Vehicle license/reg number: Steelmate product model No: Series No: Date of installation: Name of the distributor
1
Signed by distributor
26
Two way car alarm system with engine start
Troubleshooting
Contents
Fault
Solution
8. Transmitter is ineffective.
l Low power of the battery. Please charge the battery. l The frequency of the transmitter has been changed, replace the transmitter or change the frequency back to match the ECU. l The transmitter is broken or damaged. l The transmitter is out of the range. l The transmitter is switched off. l Weather conditions, tall buildings, nearby radio towers, structures around the vehicle may decrease the transmitting range.
9. Temperature on the screen is F°C.
l Check whether the temperature sensor is connected correctly to the ECU. l Check whether the temperature is out of the detection range (-40°C ~ +80°C)
10. The vehicle can not be remote started
l Check whether the handbrake is pulled up. l Check the wire connection. l Check whether the engine start relay is connected correctly. l Check whether the engine start detection wire is connected correctly, the wire should has positive voltage after the vehicle is started.
25
Important notice ----------------------------------------------------------------3 Brief look at each device-----------------------------------------------------4 About LCD screen -------------------------------------------------------------5 Turn transmitter ON/OFF-----------------------------------------------------6 Transmitter charging ----------------------------------------------------------6 Functions--------- ----------------------------------------------------------------7 1. Remote engine start----------------------------------------------------------7 2. Monitoring temperature inside the car-----------------------------------7 3. Alarm arming & locking the doors-----------------------------------------8 4. Mute arming & locking the doors------------------------------------------8 5. Disarming & unlocking the doors------------------------------------------9 6. Locating the vehicle / panic alarm-----------------------------------------9 7. Trunk release-------------------------------------------------------------------9 8. Impacting shock sensor----------------------------------------------------10 9. Impacting tilt sensor---------------------------------------------------------11 10. Sensitivity adjustment of tilt sensor------------------------------------11 11. LED indicator----------------------------------------------------------------12 12. Opening door/pressing footbrake alarm -----------------------------12 13. Opening trunk alarm ------------------------------------------------------13 14. Ignition alarm ---------------------------------------------------------------13 15. Alarm pause -----------------------------------------------------------------14 16. Emergency override ------------------------------------------------------14 17. Anti-hijack --------------------------------------------------------------------14 18. Valet mode-------------------------------------------------------------------14 19. Not-armed warning---------------------------------------------------------15 20. Passive arming/auto arming---------------------------------------------15 21. Central door lock/unlock automatically--------------------------------15 22. Rearming automatically (for unintentional disarming)-------------16 23. Open door reminding -----------------------------------------------------16 24. Open trunk reminding ----------------------------------------------------17 25. Automatic window close--------------------------------------------------18 26. Antenna range indication-------------------------------------------------18 27. Status preserving-----------------------------------------------------------18 28. Positive or negative door trigger --------------------------------------19 29. Electric door lock or Baro door lock-----------------------------------19 30. Warning for triggered system--------------------------------------------19 31. Clock alarm & time setting-----------------------------------------------20 32. Disable the former transmitters-----------------------------------------21 33. Programming new transmitters ----------------------------------------21 Technical parameters --------------------------------------------------------22 Troubleshooting -----------------------------------------------------------23-25 Warranty -------------------------------------------------------------------------26
2
Two way car alarm system with engine start
Important notice
Troubleshooting
u Keep the product and the transmitters from water and falling down. u This product will help you to lock/unlock doors or trunk, to remote start your car, it will also alarm for any un-authorized impact. u To ensure maximum performance, it is highly recommended to install this product by a professional technician. u When the battery voltage is low, please use the original charger to charge it in time. u The emitter has to be installed according to the manual to set the maximum distance monitoring. u This system can work for long distance remote monitoring, but a decrease in operating range could be caused by weather conditions, nearby radio towers, structures around the vehicle, etc.
Fault 5. The central door lock does not lock the door but other functions are normal when the alarm is installed in a Baro lock car.
l Check the wiring according to the manual. l Check whether the jump switch J1 in PCB is switched to Baro door lock.
6. The siren does not chirp when the alarm system is triggered.
l To check whether the system is mute armed. l To check the siren. l To check the wire connection between the ECU and the siren.
7. The siren chirps sharply in 10 seconds after arming and the same situation happens after disarm and re-arm it again.
l The sensor has problem, check it’s wiring, sensitivity and fix the sensor according to the manual. l Change the sensor if it is damaged. l The doors or trunk/boot is not closed, close it completely. l The door's pin switch has problem or wiring has problem.
u The car can only be started when the car is parked on “P” and the handbrake is pulled up. Otherwise, it may cause the car runs suddenly. Steelmate does not liable for any accident or losses caused by this improper action. u When the handbrake is not pulled up, the car can not be remote started. The Siren will chirp and the turn signals flash three times. No icon will appear on the screen and the system will return to previous armed status.
3
Solution
24
Two way car alarm system with engine start
Troubleshooting
Brief look at each device
Fault 1.The continuous chirping of the siren can not be stopped by transmitter after the installation of ECU.
Antenna
Solution l The wire is improperly connected. l Check whether the ECU is compatible to the transmitter. If not, the transmitter need to be programmed again. l The siren is damaged.
2. The turn signals don’t flash after disarming the system or the siren does not chirp when the door is opened without disarming.
l Door trigger wire is not connected properly. l Door switch has problem.
3. When the car parks on roadside and armed, there are false alarms by passing heavy vehicles.
l The sensitivity of the sensor is too high. Please lower the sensitivity by adjusting the shock sensor.
4. The central door lock does not work normally or does not work at all.
l Check the wiring according to the manual. l Fuse broken, check the wiring and fix the problem, then change the fuse. l The motor of central lock is damaged.
SET VOICE ALARM TIME AUTO-ARM EXT
LCD screen
Mute arming
Battery charging socket Disarming
Alarm arming
Arming button Press button once to arm in alarm arming mode with shock sensor/tilt sensor and lock the doors. Press button to stop alarming while the alarming is on. Press button to lock the doors while engine is running. Press button for 2 seconds to locate the vehicle.
23
Disarming button Press Press Press
button to disarm the system and unlock the doors. button and hold to switch transmitter ON/OFF. button to unlock the doors while engine is running.
Mute button Press button to arm in mute mode and lock the doors. Press button to stop alarming while the alarming is on. Press button for 2 seconds to start the engine when the car is armed and the handbrake is pulled up. Press button for 2 seconds to activate anti-hijack function while engine is running.
+
Trunk release
Press +
+
button together for 2 second to release the trunk.
Set mode
Press button and button together for 2 seconds to enter setting mode. Press button + button for 2 seconds again to save the setting and exit.
4
Two way car alarm system with engine start
Technical parameters
About LCD screen SET VOICE ALARM TIME AUTO-ARM EXT SET— Clock and alarm
time setting VOICE—Voice warning (optional) ALARM — Clock alarm TIME — Time setting AUTO-ARM — Automatic rearming EXT— Exit
Arming with door locked
Disarming with door unlocked
ACC ON
Clock alarm
Signal bar
5
Technical parameters for charger: Voltage: 12V ± 3V Current: *5mA Charging current: 100 ± 10mA Charging voltage: 4.23 ± 0.05V
Voltage: 3V~5.5V Current: *1mA Temperature range: -40°C ~ +80°C
Trunk-released
Engine started
3.2V~4.2V *25*A
Technical parameters for temperature sensor:
Clock or tempreature
Door opened
Voltage: Current:
Engine start icon
Arming in mute mode
Impact on car
Technical parameters for transmitters:
Temperature inside car
Arming in alarm mode
Turn signal flashing
Frequency range: 433.92 MHz Voltage: 12V ± 3V Current: *20mA Siren SPL: 105~125dB
Battery indicator
Tilted or moved
22
Two way car alarm system with engine start
32. Disable the former transmitters
Turn transmitter ON/OFF
Press the learning button in ECU for 10 seconds, the LED indicator will turn on for 10 seconds and the siren will chirp once to indicate both former transmitters are disabled.
The transmitter needs to be turned on before the first use, the factory setting is OFF. Turn transmitter ON: press button (about 3 seconds) till the transmitter is turned on with melody and vibration, the backlight of LCD screen on the transmitter will change the color from green to yellow and to red, the icons will light up one by one. Turn transmitter OFF: press button till a “Bee” heard (about 5 seconds) . Transmitter will be shut down when the battery is used up. If the transmitter cannot be turned on, please charge it first.
33. Programming new transmitters Press footbrake, turn the ignition key from ACC OFF to ACC ON 8 times continuously and keep the key at “ON” position finally, the LED indicator of alarm system will turn on, press button of the first transmitter once, the LED indicator will flash to indicate the successful program of this transmitter; press button of another transmitter once, the LED indicator will flash to indicate the successful program of the second transmitter. When the two new transmitters are functioning, the former transmitters can not be used automatically.
TXE MRA-OTUA EMIT MRALA ECIOV TES
TXE MRA-OTUA EMIT MRALA ECIOV TES
Press button on the first transmitter, the transmitter responds by melody, the LED indicator will flash to indicate the successful program of this transmitter; press button on another transmitter to program the second transmitter.
Transmitter 1 Transmitter 2
Transmitter charging When a transmitter’s battery is low, the transmitter will send out warning sound after the button is pressed, the battery indicator will display the battery status. When the battery indicator is empty, the transmitter needs to be charged immediately. Charging: connect the charger’s plug to transmitter’s battery charging socket, and then insert the charger into the vehicle’s cigarette lighter. The transmitter’s battery can be charged discontinuously.
The LED indicator flashing The LED indicator goes off TXE MRA-OTUA EMIT MRALA ECIOV TES
Battery charging socket Battery charger Insert the charger into the vehicle’s cigarette lighter
21
6
Two way car alarm system with engine start
Functions
31. Clock alarm & time setting
1. Remote engine start In ARMED status, press button for 2 seconds to remote start the car. The transmitter will "Bee" once with the icon flashes. 1). When the car is remote started, the transmitter sends out the confirmation signal once every 2 minutes. The icon flashes and the icon will turn ON; The transmitter “Bee, Bee, Bee” 3 times and vibrates once, this will repeat once. In the mean time, the temperature in the car will be refreshed once for every 30 seconds. 2). 12 minutes later, the engine will be shut down and the system will return to previous armed status. 3). Press button for 2 seconds to stop engine while the car is remote started, the transmitter will "Bee"once, and the system will return to previous armed status. 4). Press button to open doors. The car key should be turned to ACC ON position in 30 seconds after start the engine; otherwise, the system will return to previous armed status. 5). If the remote start is unsuccessful, the system will return to previous armed status. 6). If the air-condition is switched on, when engine is remote started, air-condition will work automatically.
2. Monitoring temperature inside the car
Press + button together for 2 seconds, the transmitter beeps once, the “SET” icon will flash, then press button to choose “ALARM” setting, “TIME” setting or “EXT”. 1). Clock alarm setting: When “ALARM” icon flashes on the LCD screen, press button once to enter clock alarm setting status, press button to set clock alarm ON or OFF. When “ON” flashes, press button once to enter the alarm time setting mode, set the alarm time by button and button. When “EXT” flashes on the LCD screen, press button to enter “TIME” setting mode. When “OFF” flashes, press time setting.
button once to exit the alarm
2). Time setting: When “TIME” icon flashes on the LCD screen, press button once to enter time setting mode, set the time by button and button. 3). Exit: When “EXT” flashes on the LCD screen, press + button together for 1 second to save the setting and exit the setting mode.
1). Press button or button to display temperature first and then time in the transmitter when the car is parked and the engine stops running. 2). The temperature inside the car and the engine started time count down will appear alternately in the transmitter when the car is remote started.
7
SET VOICE ALARM TIME AUTO-ARM EXT
20
Two way car alarm system with engine start
13. Opening trunk alarm
15. Alarm pause
In armed status, to open trunk will trigger the system and the siren will chirp for 30 seconds with the turn signals flashing, the engine will be immobilized. The icon and the icon on the transmitter’s LCD screen will flash, the backlight will turn on yellow, the transmitter beeps “Bee-Bee-Bee” for about 30 seconds with 8 times vibration. The system will return to its former arming status after alarm.
In armed status, opening door/trunk alarm, ignition alarm or the second impact within 15 seconds, will trigger the alarm chirping continuously, press button or button to stop the alarm and the system will return to its former arming status.
In armed status, trunk is opened
The siren chirps for 30 seconds
The turn signals The icon and the flashing flashing on the screen
16. Emergency override When the transmitter is lost or damaged and the car is armed, open the door with key and keep the door opened, press footbrake, turn the ignition key from ACC OFF to ACC ON for 10 times and keep the key at ACC ON position finally for 2 seconds, the system will be overrided. Press button or program a new transmitter will activate the normal alarm function.
17. Anti-hijack icon
14. Ignition alarm In armed status, insert the key and turn it to ON position will trigger the system and the siren will chirp for 30 seconds with the turn signals flashing, the engine will be immobilized, the icon and the icon will flash on the transmitter’s LCD screen, the backlight will turn on yellow and red alternately, the transmitter will beep “Bee-Bee-Bee” for about 30 seconds with 8 times vibration. The system will return to its former arming status after alarm. The siren chirps for 30 seconds
Press button for 2 seconds when the engine is running will trigger the anti-hijack function, the turn signals will flash quickly and the siren will chirp sharply. In 20 seconds, the engine will be shut down. Press button to stop this function.
18. Valet mode This is very useful when washing the vehicle or having it serviced. In valet mode, the system will not arm, even with the transmitter, but all convenience functions (door lock/unlock and trunk release) will work normally. When ACC on, press button for 3 seconds, the LED indicator will turn on, then press button once in 5 seconds, the siren will chirp once to indicate that the system is in valet mode. In valet mode, when ACC on, press button once, the LED indicator will turn off to indicate that the system is in normal alarm mode again.
In armed status insert the key and turn it to ON position
The turn signals flashing
The icon and the icon flashing on the screen
Note: When the system is triggered, the engine will be immobilized. When the system is triggered again by the same impact, the system will chirp for 4 minutes only, then stop. If a new trigger is detected, the system will chirp for another 4 minutes.
13
14
Two way car alarm system with engine start
19. Not-armed warning
11. LED indicator
When the car is parked with the doors closed and the system is not armed in 10 seconds, the siren will chirp 3 times and the turn signals will flash to remind the owner to arm the system.
LED indicator is very useful. It shows that the vehicle is protected by alarm Don’t touch me! system. When the system is armed, it flashes twice quickly every 2 seconds. When the system is triggered, the flashing frequency will be changed, the owner will know what has happened when he notices the flashing frequency of the LED indicator.
20. Passive arming/auto arming (optional) When the car is parked with the doors closed and the system is not armed in 10 seconds, the siren will chirp 3 times and the turn signals will flash 3 times to remind the owner to arm the system. 20 seconds later, the transmitter beeps “Bee-Bee” 3 times and vibrates 5 times with the icon and the icon flashing on the LCD screen alternately, the backlight will turn on green to remind the owner to arm the system; 60 seconds later, the system will arm in mute mode automatically with the doors unlocked. The transmitter sends out strident sound once with the icon and the “AUTO -ARM” icon appearing on the LCD screen and yellow backlight turning on.
Attention: 1). When ACC is ON, the AUTO-ARM” will stop. 2). When the door is opened and closed again, the system will enter mute arming mode automatically and the door is not locked. 3). When the car is parked and the engine is turned off, the door is not opened or not closed, the system will not AUTO-ARM. 4). Before or after auto-arming, when the car is parked with the doors closed, press button twice in 5 seconds to end autoarming completely. The passive arming function is factory setting; you can cancel this function by the jump switch J2 in the ECU to active arming when the system is being installed. For detail information, please contact the installation engineer.
When shock sensor/tilt sensor is triggered, the LED indicator will flash quickly while alarming. Then the LED indicator will quickly flash 4 times every 2 seconds until the system is disarmed and turn the key to ACC ON. To open door/trunk, turn ACC ON, press footbrake will trigger the system, the LED indicator will flash quickly and continuously until the system is disarmed and turn the key to ACC ON.
12. Opening door/pressing footbrake alarm In armed status, to open door or press footbrake will trigger the system and the siren will chirp for 30 seconds with the turn signals flashing, the engine will be immobilized. On transmitter’s LCD screen, the icon and the icon will flash, the backlight will turn on yellow, the transmitter beeps “Bee-Bee-Bee” for about 30 seconds with 8 times vibration. The system will return to its former arming status after alarm. In armed status, the door is opened
21. Central door lock/unlock automatically 15 seconds after the engine running, the doors will lock automatically by pressing footbrake. When the door (trunk) is not closed properly, 15 seconds after driving, the siren will "Bee, Bee, Bee" 3 times, the turn signals will flash once to remind the owner to close the door after the footbrake is pressed. If the door (trunk) is not closed in another 15 seconds
15
Press footbrake The siren chirps for 30 seconds
The transmitter beeps “BeeBee-Bee” for 30 seconds and vibrates 8 times
The turn signals flashing
The icon and the icon flashing on the screen
12
Two way car alarm system with engine start
9. Impacting tilt sensor (optional) When a tilt sensor is equipped, any movement of the car will trigger the alarm system. In alarm arming mode, when a slight tilt of the car is detected, the siren will chirp 5 times with the turn signals flashing, the engine will be immobilized. The transmitter will beep “Bee” 5 times and then vibrates once to remind the owner, the icon and the icon will flash on the transmitter’s LCD screen, the backlight turn on green and yellow alternately. This procedure will repeat once. When a big tilt of the car is detected, the siren will chirp for 30 seconds with the turn signals flashing, the engine will be immobilized. The transmitter beeps “Bee-Bee-Bee” for about 30 seconds with 8 times vibration to remind the owner, the icon and the icon will flash on the transmitter’s LCD screen, the backlight will turn on green and yellow alternately, the engine will be immobilized, the system will return to its former arming status after alarm. In mute arming mode, the movement of the car will trigger the system, the siren will not chirp, the turn signals will flash, the transmitter’s warnings are the same as that in alarm arming mode. In alarm arming mode, when slight tilt of the car detected
The siren will chirp 5 times
The turn signals flashing The transmitter beeps “Bee” 5 times with the icon and icon flashing on the screen
the system will repeat the previous action, but the doors will not lock. When the engine stops, the doors will unlock automatically. During driving, press to unlock the doors.
button to lock the doors, press
22. Rearming automatically (for unintentional disarming) When the system is disarmed by pressing button and the doors are not opened in 25 seconds, the system will rearm with the doors locked automatically. The transmitter will beep once. In armed status, press button to disarm the system. In 0.5 seconds, the system detects that the door is opened (the dome light of some cars will turn on after unlocking the system), but the shock sensor, till sensor, ACC or footbrake have not been triggered in 55 seconds, the system will treat it as an unintentional disarming and will return to previous armed status.
23. Open door reminding When the system is armed and the door is not closed completely, 8 seconds later, the turn signals will flash 3 times, the siren will chirp 3 times. The transmitter beeps “Bee-Bee-Bee” 3 times and vibrates 3 times, the icon appears on the LCD screen and backlight will turn on green. 15 seconds later, if the door is not closed completely, the siren will chirp with the turn signals flashing until the system is disarmed. The icon and the icon flash on the transmitter’s LCD screen for about 30 seconds, the backlight will turn on yellow, the transmitter beeps “Bee-Bee” for about 30 seconds with 8 times vibration. If the door is still opened after 30 seconds, the above alarming action will repeat for about 4 minutes or until the system is disarmed.
10. Sensitivity adjustment of tilt sensor: There are 3 sensitivity levels of tilt sensor. To press button in tilt sensor can change the sensor’s sensitivity alternately: from level 1, level 2, to level 3, level 1…
when the system is armed and the door is not closed completely in 8 seconds
Note: This icon will flash quickly from left to right on the LCD screen of the transmitter when tilt sensor is triggered.
11
button
The siren will The turn signals flash 3 chirp 3 times times to remind the owner to close the door
16
Two way car alarm system with engine start
24. Open trunk reminding When the system is armed and the trunk is not closed completely, 8 seconds later, the siren will chirp 3 times and the turn signals will flash 3 times. The transmitter beeps “Bee-Bee-Bee” 3 times and vibrates 3 times, the icon appears on the LCD screen and backlight will turn on green. The turn signals flash 3 times to remind the owner to close the trunk completely
The siren chirps 3 times When the system is armed and the trunk is not closed completely in 8 seconds
In 15 seconds, if the trunk is not closed completely, the siren will chirp with the turn signals flashing until the system is disarmed. The icon and the icon flash on the transmitter’s LCD screen for about 30 seconds, the backlight will turn on yellow, the transmitter beeps “Bee-Bee” for about 30 seconds with 8 times vibration.
three times. The icon will flash; If the trunk is detected open after 3 minutes, the transmitter will repeat the previous actions and the icon will be on. Within 3 minutes, the shock sensor and tilt sensor will be by passed, however, open door, turn ACC ON or press footbrake will trigger the alarm system. When the car does not have trunk release motor, the trunk will not open, all the sensors will be by passed for 30 seconds, the system will return to the former mode after 30 seconds.
8. Impacting shock sensor The system is 2-stage warning system: In alarm arming mode, the first shock impact will trigger the 1-stage warning of the system, the siren will beep “Bee” 5 times with the turn signals flashing, the engine will be immobilized. The transmitter will beep “Bee” 5 times and then vibrate once to remind the owner, the icon and the icon will flash on the transmitter’s LCD screen, the backlight will turn on green. This procedure will repeat once. In alarm arming mode, when shock sensor is triggered
The siren will chirp
15 seconds later, if the trunk is not closed completely
The icon and the icon flashing for 30 seconds, the backlight turns on yellow, the transmitter beeps “Bee-Bee” for 30 seconds with 8 times vibration.
The above action will repeat for about 4 minutes or until the system is disarmed.
The transmitter chirps “Bee” 5 times The siren beeps “Bee” and vibrates once with the icon 5 times with the turn and icon flashing signals flashing on the screen
A second impact within 15 seconds will trigger the 2-stage warning of the system again. The siren will chirp for about 30 seconds with the turn signals flashing, the engine will be immobilized. The transmitter will beep “Bee-Bee” for about 30 seconds with 8 times vibration, the icon and the icon will flash on the transmitter’s LCD screen, the backlight will turn on yellow. The system will return to its former arming status after alarm. In mute arming mode, the shock impact will trigger the system, the siren will not chirp, the turn signals will flash, the transmitter has the same actions as that in alarm arming mode.
17
10
Two way car alarm system with engine start
5. Disarming & unlocking the doors
25. Automatic window close (optional)
Press
Window closer function is only for vehicle with convenience system (turn key into lock position and hold until the roof/windows are closed).
button to disarm the system and unlock the doors.
In alarm arming mode, press button once to unlock the doors, the turn signals will flash twice and the siren will chirp twice, the system will be disarmed. The transmitter beeps “Bee-Bee” twice, the icon on screen will flash twice and then turn on for 5 seconds. The icon will appear on the screen and the backlight will turn on yellow. In mute arming mode, press button once to unlock the doors, the siren will not chirp, the turn signals will flash twice, the transmitter has the same actions as that in alarm arming mode.
6. Locating the vehicle/panic alarm Press button for 2 seconds, the siren will chirp for 10 seconds with the turn signals flashing. Press button again to stop this function. Press button for 2 seconds, the turn signals will flash for 10 seconds without siren chirping. Press button again to stop this function. Locating the vehicle in alarm mode
Please choose the SW2 switch to "ON" position to switch on this function. The windows and roof will be closed when arming the system. For those vehicles without this function, the SW2 switch must be on "OFF" position. Otherwise, the central locking system will be damaged. (Factory setting:SW2 switch on "OFF" position).
26. Antenna range indication Antenna range shows by signal bar, the more the bar, the stronger the signal. When the transmitter cannot receive the signal from the system, the signal bar will disappear in 3 minutes. The alarm signal will be sent to both transmitters when alarm is triggered. When a transmitter sends signal to the system, the system will send the feedback signal to the transmitter only.
Locating the vehicle in mute mode The turn signals flashing
TXE MRA-OTUA EMIT MRALA ECIOV TES
The signal bar will disappear fully, it indicates the transmitter is out of the operating range.
TXE MRA-OTUA EMIT MRALA ECIOV TES
When the transmitter cannot receive signal from the ECU for 2 to 3 minutes
Press button for 2 seconds
The siren chirps for 10 seconds with the turn signals flashing
When the signal bar shows 1 or 2 scales, it indicates the long distance between ECU and transmitter
Press button for 2 seconds
27. Status preserving
7. Trunk release When the car is parked and armed with engine stopped, you can open the trunk by pressing + buttons together on the transmitter for 1 second. The transmitter will beep three times and the icon on screen will flash for 5 seconds. The backlight of LCD screen will turn on green (for the car with trunk release motor).
If the power is cut off, the system will return to the former status in 5 seconds when the power is on again.
In arming mode, when remote open the trunk in 30 seconds, the system will detect the trunk is open. After 2 minutes, the trunk is still open, the transmitter will beep three times and vibrate
9
18
Two way car alarm system with engine start
28. Positive or negative door trigger
3. Alarm arming & locking the doors
The door trigger can be positive or negative, it can be chosen by changing the jump switch J3 to (-) or (+) in the PCB of ECU.
When armed, this system will respond if unauthorized entry is attempted. When the unauthorized entry occurs, the turn signals will flash and the siren will chirp.
The factory setting is negative door trigger. For more detailed information, please contact the installation engineer.
29. Electric door lock or Baro door lock Our system can be used for electric lock and baro lock vehicles. It can be chosen by changing the jump switch J1 in the PCB of ECU. The factory setting is for electric door lock system. For more detailed information, please contact the installation engineer.
Press button once to arm in alarm arming mode with shock sensor (tilt sensor if equipped) activated. The doors will be locked with the LED indicator flashing and the turn signals flash once, the siren chirps “Bee” once. The transmitter will beep “Bee” once with icon and icon showing on the screen. The icon flashes twice and backlight will turn on green. Park the car, pull out the key and close the doors
LED indicator flashing
The the
icon and icon turn on
SET VOICE ALARM TIME AUTO-ARM EXT
TXE MRA-OTUA EMIT MRALA ECIOV TES
30. Warning for triggered system If the system has been triggered in alarm arming status, when the system is disarmed and the door is opened: 1).The siren will chirp twice when shock sensor and tilt sensor has been triggered. 2).The siren will chirp 4 times when door / trunk has been opened, or ACC has been turned to ON, or footbrake has been pressed. 3).In mute armed mode, the LED indicator will flash continuously to remind the owner to check the vehicle, the siren won’t chirp. Note: The system will remember that the car has been impacted after the door is opened for the first time. The preserved memory will be lost after the ACC is ON. The system will remind the owner that the car has been impacted after the door is opened for the second time, the preserved memory will be deleted automatically after this, but the flashing of the LED indicator will not be deleted.
press button
The doors are locked The siren chirps The transmitter “Bee” once, the turn beeps “Bee” The icon flashes twice signals flash once. once
4. Mute arming & locking the doors When mute armed, this system will respond if unauthorized entry is attempted. When the unauthorized entry occurs, the turn signals will flash and the siren will not chirp. Press button once to arm in mute mode with shock sensor (tilt sensor if equipped) activated. The doors will be locked with the LED indicator flashing and the turn signals flash once, the siren will not chirp. The transmitter will beep once with icon and icon showing on the screen. The icon flashes twice and backlight will turn on green. Park the car, pull out the key and close the doors
LED indicator flashing
The doors are locked
Press button
The turn signals flash once TXE MRA-OTUA EMIT MRALA ECIOV TES
The icon and the icon turn on.
The icon flashes twice
19
8
SET VOICE ALARM TIME AUTO-ARM EXT
