50068218_A4-P________1.0_EN

2

2

Foundation Bolts Plant

: Nyumba Ya Akiba-Cement Plant

Department

: 441. Clinker cooler

Contract

: 1345327

Approved date

: 03-Sep-14

Created by

: VMA

Approved by

: ASU

Doc. No.:

50068218-1.0

Foundation Bolts Doc. No.: Plant: Department:

50068218-1.0 Nyumba Ya Akiba-Cement Plant 441. Clinker Cooler

1 Foundation bolt

2 Hexagon bolt

With nut and plain With nut and plain washer. washer. ISO 630-80, Fe 360 B ISO 724 d mm 10 12 16 20 22 24 30 33 36 39 42 45 48 52 56 64 72x6 76x6 80x6 90x6 100x6

3 Stud anchor

With nut and plain washer.

ISO 724 ISO 898, 4.6 L1 mm 32 40 50 63 63 80 80 100 100 125 125 125 160 160 160 200 200 230 230 280 280

4 Adhesive anchor

With nut and plain washer.

5 Rod screw

With 2 nuts, plain and square washer. ISO 630-80, Fe 360 B ISO 724, ISO 898

Note. Bolt, anchors and screws to be supplied with nuts and washers as indicated above. Additional nuts and washers, if any, are stated on a separate line in the foundation bolt list. Rod screws (type 5) to be supplied as threaded rods or round bars. The length (L) is estimated only. The actual length have to be verified by measuring the actual dimensions on site before cutting the screw. The thread length (b) is the minimum length usually required for this dimension of screw.

ISO 630 Structural steels ISO 724 Isometric screw threads ISO 898 Mechanical properties for fasteners

The information transmitted by this document is the proprietary and confidential property of FLSmidth and may not be duplicated, disclosed or utilized without written consent from FLSmidth

1

Foundation Bolts Doc. No.: Plant: Department:

A Hexagon nut ISO 4032

B Square taper washer (U) DIN 434

C Square taper washer (I) DIN 435

D Square washer ISO 7091

E Plain washer ISO 7091

F Spring washer DIN 128-A

d mm 10 12 16 20 22 24 30 33 36 39 42 45 48 52 56 64 72x6 76x6 80x6 90x6 100x6 DIN DIN DIN ISO ISO

50068218-1.0 Nyumba Ya Akiba-Cement Plant 441. Clinker Cooler

a mm 100 100 100 100 100 120 120 150 150 200 200 200 250 250 250 300 300 350 350 400 400

d1 mm 11 14 18 22 24 26 33 36 39 42 45 48 52 56 62 70 78 82 86 96 107

t mm 10 10 10 10 10 12 12 16 16 20 20 20 25 25 25 30 30 35 35 40 40

434 Square taper washers for use with channel sections. 435 Square taper washers for use with I-section. 128-A Spring washer. 4032 Hexagon nut; Product grades A d £ M16 and B d > M16. 7091 Plain washer; Product grade C. The information transmitted by this document is the proprietary and confidential property of FLSmidth and may not be duplicated, disclosed or utilized without written consent from FLSmidth

2

Foundation Bolts Doc. No.: Plant: Department: Type No. d No. Req. mm 1 8 36 8 36 1 43 24 43 24 1 44 20 44 20 1 4 24 4 24 1 4 39 1 4 30 1 12 56 5 12 42 1 12 24

50068218-1.0 Nyumba Ya Akiba-Cement Plant 441. Clinker Cooler g h c L b 150

650

115 100 100 80 75 100 100 100

50

100

Equipment

Kiln hood Kiln hood (Nuts) 400 120 Cooler CB Cooler CB (Nuts) 550 100 HRB HRB (Nuts) 400 120 HRB HRB (Nuts) 2200 100 Fan MT 280 S 1250 100 Fan MT 280 S 2240 150 Stack 1000 1300 1300 Duct(70-1) 1000 120 Duct (70-2)

Equipment No. 441.KH050 441.KH050 441.CC100 441.CC100 441.RB400 441.RB400 441.RB400 441.RB400 441.FN590 441.FN590 441.SK595 441.XA910 441.XA910

The information transmitted by this document is the proprietary and confidential property of FLSmidth and may not be duplicated, disclosed or utilized without written consent from FLSmidth .

3