3hh-08079-Ddaa-tczza-01-r4_3 Cli Command Guide for Fd 100_320gbps - r4_3_x
March 31, 2017 | Author: dracfun2002 | Category: N/A
Short Description
Download 3hh-08079-Ddaa-tczza-01-r4_3 Cli Command Guide for Fd 100_320gbps - r4_3_x...
Description
Alcatel-Lucent 7302
INTELLIGENT SERVICES ACCESS MANAGER
Alcatel-Lucent 7330
INTELLIGENT SERVICES ACCESS MANAGER FIBER TO THE NODE
Alcatel-Lucent 7360
INTELLIGENT SERVICES ACCESS MANAGER FX CLI COMMAND GUIDE FOR FD 100/320GBPS NT and FX NT
R4.3 3 HH - 0 8079- DDAA-T C ZZA E d itio n 01 Re le ase d Alcatel-Lucent Proprietary This document contains proprietary information of Alcatel-Lucent and is not to be disclosed or used except in accordance with applicable agreements. Copyright 2011 © Alcatel-Lucent. All rights reserved.
Status Change Note Short Title
Released
Released CD CLI CMD GUIDE All rigths reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel-Lucent.
3HH-08079-DDAA-TCZZA
01
Contents
Contents 1- ISAM CLI
1
1.1 History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3 CLI Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 Nodes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.6 Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 Getting help . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.9 The CLI Prompt . . . . . . . . . . . . . . . . . . . . . . . . . 1.10 Entering CLI Commands . . . . . . . . . . . . . . . . . . . . 1.11 CLI Backward Compatibility . . . . . . . . . . . . . . . . . . 1.12 Phase Out Strategy Obsolete Commands and/or Parameters 1.13 Command Phase Out Annoucement Release . . . . . . . . . 1.14 Non supported commands/parameters . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
2- Environment Configuration Commands
2 37 38 40 41 44 45 46 47 48 49 51 52 53
55
2.1 Environment Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 56 2.2 Environment Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
3- Alarm Configuration Commands
59
3.1 Alarm Configuration Command Tree . . . . . . . . . 3.2 Alarm Log Configuration Command . . . . . . . . . . 3.3 Alarm Entry Configuration Command . . . . . . . . . 3.4 Alarm Delta Log Configuration Command . . . . . . 3.5 Customizable Alarm Profile Configuration Command
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
4- Trap Configuration Commands
60 62 64 86 88
93
4.1 Trap Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 4.2 Trap Definition Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 4.3 Trap Manager Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
5- Equipment Configuration Commands 5.1 Equipment Configuration Command Tree . . . . . 5.2 Rack Configuration Command . . . . . . . . . . . . 5.3 Shelf Configuration Command . . . . . . . . . . . . 5.4 Slot Configuration Command . . . . . . . . . . . . 5.5 Applique Configuration Command . . . . . . . . . . 5.6 Protection Group Configuration Command . . . . . 5.7 Protection Element Configuration Command . . . . 5.8 External-link-host Configuration Commands . . . . 5.9 Host Shelf SFP Configuration Commands . . . . . 5.10 NE Configuration Command . . . . . . . . . . . . 5.11 Environment Monitoring Configuration Command
102 . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
6- Gpon ONT Configuration Commands
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
103 104 105 107 109 111 112 114 116 118 119
120
6.1 Gpon ONT Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 121 6.2 ONT Interface Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123 6.3 GPON GEM port performance monitoring Configuration Commands . . . . . . . . . . . . . 128
3HH-08079-DDAA-TCZZA 01
Released
i
Contents
6.4 ONT-SIDE TC-layer Performance Monitoring Counter Thresholds Configuration Command for 130 ONT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 Multicast TC-layer Performance Monitoring Command for ONT . . . . . . . . . . . . . . . . 132 6.6 Fec TC-layer Performance Monitoring Command for ONT . . . . . . . . . . . . . . . . . . 134 6.7 ONT Card Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 6.8 ONT Software Control Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . 138
7- xDSL Configuration Commands
140
7.1 xDSL Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . 7.2 xDSL Common Service Profile Configuration Command . . . . . . . . . . . . 7.3 xDSL Common Spectrum Profile Configuration Command . . . . . . . . . . . 7.4 xDSL Artificial Noise Downstream Configuration Command . . . . . . . . . . . 7.5 xDSL Spectrum Profile for ADSL/ADSL2 Configuration Command . . . . . . . 7.6 xDSL Spectrum Profile for RE-ADSL2 Configuration Command . . . . . . . . 7.7 xDSL Spectrum Profile for ADSL2 Plus Configuration Command . . . . . . . . 7.8 ADSL2-plus Custom PSD shape Configuration Command . . . . . . . . . . . 7.9 xDSL Spectrum Profile for VDSL Configuration Command . . . . . . . . . . . 7.10 VDSL Ghs Tones Transmission Power Control Configuration Command . . . 7.11 VDSL Custom PSD shape Downstream Configuration Command . . . . . . . 7.12 VDSL Custom RX PSD shape Upstream Configuration Command . . . . . . 7.13 VDSL Power Back Off Configuration Command . . . . . . . . . . . . . . . . 7.14 xDSL Spectrum Profile for VDSL2 Configuration Command . . . . . . . . . . 7.15 VDSL2 Custom PSD shape Downstream Configuration Command . . . . . . 7.16 VDSL2 Custom PSD shape Upstream Configuration Command . . . . . . . . 7.17 VDSL2 Custom RX PSD shape Upstream Configuration Command . . . . . . 7.18 VDSL2 Virtual Noise Downstream Configuration Command . . . . . . . . . . 7.19 VDSL2 Virtual Noise Upstream Configuration Command . . . . . . . . . . . . 7.20 VDSL2 Power Back Off Configuration Command . . . . . . . . . . . . . . . . 7.21 xDSL DPBO Profile Configuration Command . . . . . . . . . . . . . . . . . . 7.22 xDSL DPBO Mode Independent Custom PSD Mask Configuration Command 7.23 xDSL DPBO Exchange PSD Mask Configuration Command . . . . . . . . . . 7.24 xDSL RTX Profile Configuration Command . . . . . . . . . . . . . . . . . . . 7.25 xDSL Vectoring Profile Configuration Command . . . . . . . . . . . . . . . . 7.26 xDSL Vectoring Control Entity Profile Configuration Command . . . . . . . . 7.27 xDSL Line Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 7.28 xDSL Line TCA Threshold Configuration Command . . . . . . . . . . . . . . 7.29 xDSL Board Configuration Command . . . . . . . . . . . . . . . . . . . . . . 7.30 xDSL Per Line Overrule Configuration Command . . . . . . . . . . . . . . . 7.31 xDSL Overrule Noise Psd Shape Downstream Configuration Command . . . 7.32 xDSL Overrule Noise Psd Shape Upstream Configuration Command . . . . . 7.33 xDSL INS Near End Configuration Command . . . . . . . . . . . . . . . . . . 7.34 xDSL INS Far End Configuration Command . . . . . . . . . . . . . . . . . . 7.35 xDSL Vectoring Processing Board Configuration Command . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.1 Gpon xDSL Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . 8.2 Gpon xDSL Common Service Profile Configuration Command . . . . . . . . . . . . 8.3 Gpon xDSL Common Spectrum Profile Configuration Command . . . . . . . . . . . 8.4 Gpon xDSL Spectrum Profile for VDSL Configuration Command . . . . . . . . . . . 8.5 Gpon xDSL Spectrum Profile for VDSL2 Configuration Command . . . . . . . . . . 8.6 ONT VDSL2 Virtual Noise Downstream Configuration Command . . . . . . . . . . . 8.7 ONT VDSL2 Virtual Noise Upstream Configuration Command . . . . . . . . . . . . 8.8 Gpon xDSL Line Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 8.9 Gpon xDSL DPBO Profile Configuration Command . . . . . . . . . . . . . . . . . . 8.10 Gpon xDSL DPBO Mode Independent Custom PSD Mask Configuration Command 8.11 Gpon xDSL DPBO Exchange PSD Mask Configuration Command . . . . . . . . . 8.12 Gpon xDSL ONT Configuration Command . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
8- Gpon xDSL Configuration Commands
ii
Released
142 150 153 159 161 164 166 170 172 179 181 183 185 186 192 194 196 198 200 202 204 206 208 210 214 217 220 225 228 230 237 239 241 243 245
247
3HH-08079-DDAA-TCZZA
248 251 254 258 260 263 265 267 271 273 275 277
01
Contents
9- ATM Configuration Commands
279
9.1 ATM Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 9.2 ATM PVC Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 281 9.3 IPOA X-connect L2 interworking port Configuration Command . . . . . . . . . . . . . . . . 283
10- Interface Management Configuration Commands 10.1 Interface Management Configuration Command Tree 10.2 Network Interface Configuration Command . . . . . . 10.3 Extend Interface Configuration Command . . . . . . . 10.4 Interface Alarm Configuration Command . . . . . . .
. . . .
. . . .
. . . .
285 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
11- Error Configuration Commands
. . . .
286 287 291 292
293
11.1 Error Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294 11.2 Error Log Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295
12- System Configuration Commands
296
12.1 System Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.2 System Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.3 System SNTP Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . 12.4 System SNTP Server Table Configuration Command . . . . . . . . . . . . . . . . . . 12.5 System Loop ID Syntax Configuration Command . . . . . . . . . . . . . . . . . . . . . 12.6 Maximum Lt Link Speed Configuration Command . . . . . . . . . . . . . . . . . . . . 12.7 System Clock Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . 12.8 System ONT Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 12.9 System Synchronous Interface Timing Clock Switching Mode Configuration Command 12.10 System Clock Bits Mode Configuration Command . . . . . . . . . . . . . . . . . . . 12.11 System Clock Source Priority Configuration Command . . . . . . . . . . . . . . . . . 12.12 NTR Clock PTP Packet Mode Configuration Command . . . . . . . . . . . . . . . . . 12.13 NTR Clock Transmission Protocol Configuration Command . . . . . . . . . . . . . . 12.14 System Synchronous InterfaceTiming Clock Switching Mode configuration Command 12.15 NTR Acceptable Clock Master Configuration Command . . . . . . . . . . . . . . . . 12.16 System Clock Synchronous Status Message Configuration Command . . . . . . . . 12.17 System Clock Synchronous Source port Configuration Command . . . . . . . . . . . 12.18 System Clock Force Reference Configuration Command . . . . . . . . . . . . . . . . 12.19 SSMOut Configuration Command for synce ports . . . . . . . . . . . . . . . . . . . . 12.20 SSMOut Configuration Command for XDSL ports . . . . . . . . . . . . . . . . . . . . 12.21 T4 D-PLL Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
13- Security Configuration Commands 13.1 Security Configuration Command Tree . . . . . . . . . . . . . . . 13.2 Security Banner Configuration Commmand . . . . . . . . . . . . . 13.3 Operator Configuration Command . . . . . . . . . . . . . . . . . . 13.4 Profile Configuration Command . . . . . . . . . . . . . . . . . . . 13.5 Default Profile Configuration Command . . . . . . . . . . . . . . . 13.6 SNMP View Configuration Command . . . . . . . . . . . . . . . . 13.7 Security SNMP Community Configuration Command . . . . . . . . 13.8 Security SNMPv3 Group Configuration Command . . . . . . . . . 13.9 Security SNMPv3 User Configuration Command . . . . . . . . . . 13.10 Security SNMPv3 User-Group Configuration Command . . . . . 13.11 SNMP Notify View Configuration Command . . . . . . . . . . . . 13.12 Security SNMP Notification Profile Configuration Command . . . 13.13 Security SNMP Notification Profile Filter Configuration Command 13.14 Security SNMP Element Manager Configuration Command . . . 13.15 Security RADIUS Client Configuration Command . . . . . . . . . 13.16 Security RADIUS Authentication Server Configuration Command
3HH-08079-DDAA-TCZZA 01
. . . . . . . . . . . . . . . . . . . . .
297 299 302 303 304 306 307 308 309 312 313 314 315 316 317 318 321 323 324 326 328
330 . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
Released
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
331 336 337 339 346 352 354 356 359 361 363 365 367 369 371 372
iii
Contents
13.17 Security RADIUS Accounting Server Configuration Command . . . . . . 13.18 Security RADIUS Dynamic Authorization Client Configuration Command 13.19 Security RADIUS Policy Configuration Command . . . . . . . . . . . . . 13.20 Security RADIUS Server Configuration Command . . . . . . . . . . . . 13.21 Security Domain Configuration Command . . . . . . . . . . . . . . . . . 13.22 Security Connection Profile Configuration Command . . . . . . . . . . . 13.23 Security Connection Policy Configuration Command . . . . . . . . . . . 13.24 Security 802.1x PAE System Configuration Command . . . . . . . . . . 13.25 Security 802.1x Port Authentication Configuration Command . . . . . . 13.26 Security 802.1x Extension, Port Authentication Configuration Command 13.27 Security 802.1x Port Configuration Command . . . . . . . . . . . . . . . 13.28 Security Password Policy Configuration Commmand . . . . . . . . . . . 13.29 File Transfer Configure Command . . . . . . . . . . . . . . . . . . . . . 13.30 file Transfer server Configure Commands . . . . . . . . . . . . . . . . . 13.31 PM File Upload Configure Command . . . . . . . . . . . . . . . . . . . 13.32 PM File Upload Configure Command . . . . . . . . . . . . . . . . . . . 13.33 Lawful Intercept Split Management Configuration Command . . . . . . . 13.34 MAC Filter Configuration Command . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
14- Secure Shell Configuration Commands 14.1 Secure Shell Configuration Command Tree . . . . 14.2 SSH Server Configuration Command . . . . . . . 14.3 Secure Shell User Configuration Command . . . . 14.4 Secure Shell Access Configuration Command . . 14.5 Secure Shell SFTP User Configuration Command
. . . . . . . . . . . . . . . . . .
374 376 378 380 382 384 385 386 387 389 391 393 395 396 397 398 400 401
402 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
15- Transaction Configuration Commands
. . . . .
403 404 405 406 408
409
15.1 Transaction Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 410 15.2 Transaction Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 411
16- SYSLOG Configuration Commands
412
16.1 SYSLOG Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413 16.2 SYSLOG Destination Configuration command . . . . . . . . . . . . . . . . . . . . . . . . 414 16.3 SYSLOG Route Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 416
17- Software Management Configuration Commands
419
17.1 Software Management Configuration Command Tree . . . . . . . . . . . . . . . . . . . . 420 17.2 Software Management Overall Software Package Configuration Command . . . . . . . . 421 17.3 Database Automatic Activation Configure Command . . . . . . . . . . . . . . . . . . . . . 424
18- QoS Configuration Commands
426
18.1 QoS Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.2 QoS Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18.3 QoS 802.1P Class-to-Queue Mapping Configuration Command . . . . . . . . . . . . 18.4 QoS Dsl Control Pkt Policer Configuration Command . . . . . . . . . . . . . . . . . 18.5 QoS DSCP-to-Dot1P Alignment for L3 Forwarded Traffic Configuration Command . 18.6 QoS Queue Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . 18.7 QoS Scheduler Node Profile Configuration Command . . . . . . . . . . . . . . . . . 18.8 QoS CAC Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.9 QoS Single Dot1P Marker Configuration Command . . . . . . . . . . . . . . . . . . 18.10 QoS Single DSCP Marker Configuration Command . . . . . . . . . . . . . . . . . . 18.11 QoS DSCP Contract Table Marker Configuration Command . . . . . . . . . . . . . 18.12 QoS DSCP Contract Table Code-point Configuration Command For DSCP-contract 18.13 QoS Dot1P and DSCP Contract Table Marker Configuration Command . . . . . . . 18.14 DSCP Contract Table Codepoint Configuration Command For D1p-dscp-contract . 18.15 QoS Dot1P and Single DSCP Marker Configuration Command . . . . . . . . . . .
iv
Released
3HH-08079-DDAA-TCZZA
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
428 432 434 436 437 438 441 443 445 446 447 448 449 450 451
01
Contents
18.16 QoS Dot1P Alignment Marker Configuration Command . . . . . . . . . . . . . . . . 18.17 QoS Dot1P Remark Table Marker Configuration Command . . . . . . . . . . . . . 18.18 QoS DSCP Contract Table Code-point Configuration Command For DSCP-contract 18.19 QoS Policer Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.20 QoS L2 Filter Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.21 QoS L3 Filter Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.22 QoS Policy Action Profile Configuration Command . . . . . . . . . . . . . . . . . . 18.23 QoS Policy Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . 18.24 QoS Session Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.25 QoS Session Upstream Policy List Configuration Command . . . . . . . . . . . . . 18.26 QoS Session Downstream Policy List Configuration Command . . . . . . . . . . . 18.27 QoS Shaper Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . 18.28 QoS Bandwidth Profile Configuration Command . . . . . . . . . . . . . . . . . . . 18.29 QoS IngressQoS Profile Configuration Command . . . . . . . . . . . . . . . . . . . 18.30 QoS Board-Level Queue and Performance Configuration Command . . . . . . . . 18.31 QoS Queue Threshold Crossing Alarm Configuration Command . . . . . . . . . . . 18.32 QoS DSL Link Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . 18.33 QoS LIM Queue Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.34 QoS ShdSL Link Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 18.35 QoS LIM Queue (SHDSL) Configuration Command . . . . . . . . . . . . . . . . . . 18.36 QoS Interface Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . 18.37 QoS Interface Queue Configuration Command . . . . . . . . . . . . . . . . . . . . 18.38 QoS Interface Upstream Queue Configuration Command . . . . . . . . . . . . . . 18.39 QoS Line Control Packets Rate Limit Configuration Command . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
19- VLAN Configuration Commands
452 454 455 456 459 461 463 465 467 470 471 472 474 476 479 481 483 485 487 489 491 494 497 500
502
19.1 VLAN Configuration Command Tree . . . . . . . . . . . . 19.2 VLAN General Configuration Command . . . . . . . . . . . 19.3 Virtual MAC Configuration Command . . . . . . . . . . . . 19.4 VLAN Configuration Command . . . . . . . . . . . . . . . 19.5 VLAN Filtering Database Configuration Command . . . . . 19.6 VLAN Port Filtering Database Configuration Command . . 19.7 VLAN Protocol-based Configuration Command . . . . . . . 19.8 Vlan Pbit Traffic Counter Configuration Command . . . . . 19.9 Vlan Priority Regeneration Profile Configuration Command
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
20- Bridge Configuration Commands 20.1 Bridge Configuration Command Tree . . . . . . . . . . . 20.2 Bridge General Configuration Command . . . . . . . . . 20.3 Bridge Port Configuration Command . . . . . . . . . . . 20.4 Bridge Port to VLAN Association Configuration Command 20.5 L2 Static User Ip Address Configuration Command . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . .
503 505 507 508 514 516 518 521 523
525 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
21- ARP-RELAY Configuration Commands
. . . . .
526 527 528 533 538
540
21.1 ARP-RELAY Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 541 21.2 Arp-Relay Statistics Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 542
22- IGMP Configuration Commands
544
22.1 IGMP Configuration Command Tree . . . . . . . . . . . . . . . . . . . . 22.2 IGMP Channel Configuration Command . . . . . . . . . . . . . . . . . 22.3 IGMP Channel Permission Package Members Configuration Command 22.4 IGMP Channel Preview Package Members Configuration Command . . 22.5 IGMP Package Bitmaps Configuration Command . . . . . . . . . . . . 22.6 IGMP System Configuration Command . . . . . . . . . . . . . . . . . . 22.7 IGMP System CDR Type Configuration Command . . . . . . . . . . . . 22.8 IGMP Vlan System Configuration Command . . . . . . . . . . . . . . . 22.9 IGMP Multicast Vlan Translation Command . . . . . . . . . . . . . . . .
3HH-08079-DDAA-TCZZA 01
. . . . . . . . .
. . . . . . . . .
Released
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
545 547 552 554 556 558 561 562 563
v
Contents
22.10 Igmp Multicast Service Context Configuration Command . . . . . . . . . . . . . . . . . . 564
23- Multicast Configuration Commands
565
23.1 Multicast Configuration Command Tree . . . . . . . . . . . . . 23.2 Multicast General Group Configuration Command . . . . . . . 23.3 General Multicast Package Members Configuration Command 23.4 Multicast Capacity Configuration Command . . . . . . . . . . . 23.5 Multicast Channel Configuration Command . . . . . . . . . . . 23.6 Multicast Channel Package Members Configuration Command 23.7 Multicast Channel Configuration Command . . . . . . . . . . . 23.8 Multicast Channel Package Members Configuration Command 23.9 Multicast Monitoring Source Configuration Command . . . . . 23.10 Multicast Monitoring Channel Configuration Command . . . . 23.11 Multicast Static Branch Configuration Command . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
24- PPPoX-Relay Configuration Commands
. . . . . . . . . . .
566 568 570 571 572 574 575 577 578 579 580
582
24.1 PPPoX-Relay Configuration Command Tree . . . . . . . . . . . . . . 24.2 PPPoX Cross-connect Global Configuration Command . . . . . . . . 24.3 PPPoX Cross-connect Engine Configuration Command . . . . . . . . 24.4 PPPoX Cross-connect Engine Monitoring Configuration Command . . 24.5 PPPoX Cross-connect Client Port Configuration Command . . . . . . 24.6 PPPoX Cross-connect Client Port Monitoring Configuration Command
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
25- PPPoEL2STATS Configuration Commands
. . . . . .
583 584 586 588 589 592
594
25.1 PPPoEL2STATS Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . 595 25.2 Pppoe-L2 Statistics Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 596
26- DHCP Relay Configuration Commands
598
26.1 DHCP Relay Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 599 26.2 DHCP Relay User Port Configuration Command . . . . . . . . . . . . . . . . . . . . . . . 600 26.3 DHCP v6 Relay User Port Configuration Command . . . . . . . . . . . . . . . . . . . . . 602
27- XDSL Bonding Configuration Commands
604
27.1 XDSL Bonding Configuration Command Tree . . . . . . . 27.2 XDSL Bonding Assembly Timer Configuration Command 27.3 xDSL Bonding Group Profile Configuration Command . . 27.4 xDSL Bonding Configuration Command . . . . . . . . . . 27.5 xDSL Bonding Configuration Command . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
28- CPE Remote Configuration Commands
605 606 607 610 612
613
28.1 CPE Remote Configuration Command Tree . . . . . . . . . 28.2 CPE Remote Management System Configuration Commands 28.3 CPE Manager Configuration Command . . . . . . . . . . . . 28.4 CPE IPProxy Session Configuration Command . . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
29- SHDSL Configuration Commands 29.1 SHDSL Configuration Command Tree . . . 29.2 SHDSL Span Configuration Command . . 29.3 SHDSL Unit Configuration Command . . . 29.4 SHDSL Segment Configuration Command
. . . . .
. . . .
614 615 616 617
618 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
30- IMA Configuration Commands
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
619 621 626 628
630
30.1 IMA Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 631 30.2 IMA Group Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 632
vi
Released
3HH-08079-DDAA-TCZZA
01
Contents
30.3 IMA Link Configuration Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 634
31- L2CP Configuration Commands 31.1 L2CP Configuration Command Tree . . . . . . . . 31.2 L2CP Configuration Command . . . . . . . . . . . 31.3 L2CP Session Configuration Command . . . . . . 31.4 L2CP User Port Partition Configuration Command
635 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
32- Voice Configuration Commands 32.1 Voice Configuration Command Tree . . . . . . . . . . . . . . . . . . 32.2 Voice Sip Server Configuration Commands . . . . . . . . . . . . . . 32.3 Voice Sip LineId Syntax Profile Configuration Commands . . . . . . 32.4 Voice Sip User Agent Configuration Commands . . . . . . . . . . . 32.5 Sip Voice Service Provider Configuration Commands . . . . . . . . 32.6 Voice Sip User Agent Access Point Configuration Command . . . . 32.7 Voice Sip Dial Plan Configuration Commands . . . . . . . . . . . . 32.8 Voice Sip Dial Plan Digitmap Configuration Commands . . . . . . . 32.9 Voice Sip Termination Configuration Commands . . . . . . . . . . . 32.10 Voice Sip Termination TCA Threshold Configuration Command . . 32.11 Sip Voice Register Configuration Commands . . . . . . . . . . . . 32.12 Voice Sip Transport Configuration Commands . . . . . . . . . . . 32.13 Voice Sip Redundancy Table Configuration Commands . . . . . . 32.14 Voice Sip System Session Timer Configuration Commands . . . . 32.15 Voice Sip DNS Server Configuration Commands . . . . . . . . . . 32.16 Voice Sip DHCP Authentication Params Configuration Commands 32.17 manage restoration Failover/Failback type/mode . . . . . . . . . . 32.18 Voice Cluster Configuration Commands . . . . . . . . . . . . . . . 32.19 Voice Megaco IP Configuration Commands . . . . . . . . . . . . . 32.20 Voice Megaco Equipment Configuration Commands . . . . . . . . 32.21 Voice Megaco Equipment Board Configuration Commands . . . . 32.22 Voice Megaco Equipment Termination Configuration Commands . 32.23 Voice Megaco Media Gateway Configuration Commands . . . . . 32.24 Voice Megaco Signal Gateway Configuration Commands . . . . .
. . . .
642 . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
33.1 Voice Ont Configuration Command Tree . . . . . . . . . . . . . . . . 33.2 Voice ONT Service Configuration Command . . . . . . . . . . . . . . 33.3 Performance Monitoring configuration command for VOIP service . . 33.4 Voice ONT POTS Configuration Command . . . . . . . . . . . . . . . 33.5 Voice ONT Voice-Port Configuration Command . . . . . . . . . . . . 33.6 GPON Authentication Security Profile Configuration Command . . . . 33.7 Voice ONT Secure URI profile Configuration command . . . . . . . . 33.8 GPON URI Profile Configuration Command . . . . . . . . . . . . . . . 33.9 GPON Tone Pattern Profile Configuration Command . . . . . . . . . . 33.10 GPON Tone Pattern Sequence Profile Configuration Command . . . 33.11 Tone Event Profile Configuration Command . . . . . . . . . . . . . . 33.12 GPON Busy Tone Event Profile Configuration Command . . . . . . . 33.13 GPON First Call Wait Tone Event Profile Configuration Command . . 33.14 GPON Second Call Wait Tone Event Profile Configuration Command 33.15 GPON Third Call Wait Tone Event Profile Configuration Command . 33.16 GPON Fourth Call Wait Tone Event Profile Configuration Command 33.17 GPON Alert Tone Event Profile Configuration Command . . . . . . . 33.18 GPON Special Dial Tone Event Profile Configuration Command . . . 33.19 GPON Special Info Tone Event Profile Configuration Command . . . 33.20 GPON Release Tone Event Profile Configuration Command . . . . . 33.21 GPON Congest Tone Event Profile Configuration Command . . . . . 33.22 GPON Confirm Tone Event Profile Configuration Command . . . . . 33.23 GPON Dial Tone Event Profile Configuration Command . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
33- Voice Ont Configuration Commands
3HH-08079-DDAA-TCZZA 01
636 637 638 641
643 648 651 653 656 661 663 664 665 667 669 671 673 676 678 680 682 683 684 686 688 690 694 704
706
Released
708 715 719 721 724 727 729 731 732 734 738 739 741 743 745 747 749 751 753 755 757 759 761
vii
Contents
33.24 GPON Message Wait Tone Event Profile Configuration Command . . . . 33.25 GPON Reorder Tone Event Profile Configuration Command . . . . . . . . 33.26 GPON Ring Back Tone Event Profile Configuration Command . . . . . . . 33.27 GPON Roh Tone Event Profile Configuration Command . . . . . . . . . . 33.28 GPON Stutter Tone Event Profile Configuration Command . . . . . . . . . 33.29 GPON Intrusion Tone Event Profile Configuration Command . . . . . . . . 33.30 GPON Dead Tone Event Profile Configuration Command . . . . . . . . . 33.31 GPON First User Defined Tone Event Profile Configuration Command . . 33.32 GPON Second User Defined Tone Event Profile Configuration Command 33.33 GPON Third User Defined Tone Event Profile Configuration Command . . 33.34 GPON Fourth User Defined Tone Event Profile Configuration Command . 33.35 GPON Network Dial Plan Profile Configuration Command . . . . . . . . . 33.36 Create a RTP profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.37 Create a Voice Service profile . . . . . . . . . . . . . . . . . . . . . . . . 33.38 Create a VOIP Application Service Profile . . . . . . . . . . . . . . . . . . 33.39 Create a VOIP media profile . . . . . . . . . . . . . . . . . . . . . . . . . 33.40 GPON Ringing Pattern Profile Configuration Command . . . . . . . . . . 33.41 GPON Ringing Pattern Sequence Profile Configuration Command . . . . 33.42 GPON Ring Event Profile Configuration Command . . . . . . . . . . . . . 33.43 GPON VOIP Feature Access Codes Profile Configuration Command . . . 33.44 GPON Common VOIP Configuration Command . . . . . . . . . . . . . . . 33.45 GPON Voice ONT POTS Rtp PM Mode Configuration Command . . . . . 33.46 GPON ONT SIP Configuration Command . . . . . . . . . . . . . . . . . . 33.47 Voice Ont SIP Agent PM Mode Configuration Command . . . . . . . . . . 33.48 Voice Ont SIP Agent Call PM Mode Configuration Command . . . . . . . 33.49 Configure ont POT SIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.50 Voice ONT MGC Configuration command . . . . . . . . . . . . . . . . . . 33.51 Voice ONT MGC PM monitoring command . . . . . . . . . . . . . . . . . 33.52 Voice Ont Pots Call PM Mode Configuration Command . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
34- Debug Configuration Commands
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
763 765 767 769 771 773 775 777 779 781 783 785 787 789 792 797 803 805 808 811 814 816 818 822 824 826 830 833 834
836
34.1 Debug Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 837 34.2 Protocol Tracing Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 838
35- Ethernet User Ports Configuration Commands 35.1 Ethernet User Ports Configuration Command Tree . . . 35.2 Ethernet Line Configuration Command . . . . . . . . . 35.3 Ethernet Line TCA Threshold Configuration Command 35.4 Ethernet Line Mau Configuration Command . . . . . .
840 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
36- ONT Ethernet Port Configuration Command
. . . .
841 842 843 845
847
36.1 ONT Ethernet Port Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . 848 36.2 ONT Ethernet Port Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 849 36.3 ONT Ethernet Port Performance Monitoring Configuration Command . . . . . . . . . . . . 852
37- Efm Oam Configuration Commands
854
37.1 Efm Oam Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 855 37.2 Efm Oam Interface ConfigurationCommand . . . . . . . . . . . . . . . . . . . . . . . . . . 856
38- CFM Configuration Commands
858
38.1 CFM Configuration Command Tree . . . . . . . . . . . . . . . . . . 38.2 Maintenance Domain on NT Configuration Command . . . . . . . . 38.3 Maintenance Association on NT Configuration Command . . . . . . 38.4 Maintenance Association End Point on NT Configuration Command
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
39- Trouble-Shooting Configuration Commands
viii
Released
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
859 860 862 864
866
3HH-08079-DDAA-TCZZA
01
Contents
39.1 Trouble-Shooting Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . 867 39.2 Trouble-shooting Interface Configuration Commands . . . . . . . . . . . . . . . . . . . . 868
40- Trouble-Shooting Pon Interface Configuration Command
870
40.1 Trouble-Shooting Pon Interface Configuration Command Tree . . . . . . . . . . . . . . . 871 40.2 Trouble-shooting Pon Interface Configuration Commands . . . . . . . . . . . . . . . . . . 872
41- IPoA/E IW Configuration Commands
873
41.1 IPoA/E IW Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 874 41.2 IPoA/E IW Interworking Port Configuration Command . . . . . . . . . . . . . . . . . . . . 875 41.3 IPoA/E IW Gateway Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 877
42- LineTest Configuration Commands
878
42.1 LineTest Configuration Command Tree . . . . . . . 42.2 Megaco LineTest Session Configuration Command 42.3 Megaco LineTest Line Configuration Command . . 42.4 MEGACO LineTest Param Configuration Command 42.5 SINGLE LineTest Session Configuration Command 42.6 SINGLE LineTest Line Configuration Command . . 42.7 SINGLE LineTest Param Configuration Command .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
43- LACP Configuration Commands 43.1 LACP Configuration Command Tree . . . 43.2 LACP general configuration command . . 43.3 LACP port configuration command . . . . 43.4 LACP group configuration command . . . 43.5 LACP Group Port configuration command .
. . . . . . .
879 881 884 886 890 894 896
900 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
44- MSTP Configuration Commands 44.1 MSTP Configuration Command Tree . . . . . . . . . . 44.2 MSTP general configuration Command . . . . . . . . . 44.3 MSTP Instance configuration Command . . . . . . . . 44.4 MSTP Vlan-Instance Mapping configuration Command 44.5 MSTP Port configuration Command . . . . . . . . . . . 44.6 MSTP Port-Instance configuration Command . . . . . .
. . . . .
901 902 903 904 906
907 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
45- Pon Configuration Commands
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
908 909 911 912 913 915
917
45.1 Pon Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45.2 Pon Interface Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45.3 Pon GEM Port Performance Monitoring Configuration Command . . . . . . . . . . . . . . 45.4 OLT-SIDE TC-layer Performance Monitoring Counter Thresholds Configuration Command for PON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45.5 Multicast TC-layer Performance Monitoring Command for PON . . . . . . . . . . . . . . . 45.6 OTDR enable Command for PON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45.7 Pon Protection Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 45.8 Power Shedding Profile Configuration Command . . . . . . . . . . . . . . . . . . . . . . .
46- Uni Ont Configuration Commands
918 919 922 924 926 928 929 931
933
46.1 Uni Ont Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 934 46.2 Uni Ont Video Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . 935 46.3 Uni Ont TC layer Ccounters Configuration Command . . . . . . . . . . . . . . . . . . . . 937
47- CES Configuration Commands
939
47.1 CES Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 940
3HH-08079-DDAA-TCZZA 01
Released
ix
Contents
47.2 CES Maintenance Profile Configuration Command . . . 47.3 CES Service Port Provisioning Configuration Command 47.4 CES Service PM Mode Configuration Command . . . . 47.5 CES Service Configuration Command . . . . . . . . . . 47.6 CES Service Gem Port Configuration Command . . . . 47.7 CES Service Configuration Command . . . . . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
48- ANI ONT Configuration Commands
. . . . . .
941 943 946 948 951 953
955
48.1 ANI ONT Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . 956 48.2 ANI ONT Thershold Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . 957 48.3 ANI ONT Video Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 959
49- L2UNI Configuration Commands
961
49.1 L2UNI Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 962 49.2 L2 UNI ONT Performance Monitor Configuration Command . . . . . . . . . . . . . . . . . 963 49.3 TC-layer Performance Monitoring Counter Thresholds Configuration Command for 965 ONTL2UNI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
50- IpHost Configuration Commands
967
50.1 IpHost Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 968 50.2 Voice Ont IP-Host Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . 969 50.3 Voice Ont IP-Host PM Mode Configuration Command . . . . . . . . . . . . . . . . . . . . 972
51- ONT VEIP Configuration Commands
974
51.1 ONT VEIP Configuration Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 975 51.2 ONT VEIP Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 976 51.3 ONT VEIP Port Performance Monitoring Configuration Command . . . . . . . . . . . . . . 978
52- Configure NTP parameters on a specific ONT
980
52.1 Configure NTP parameters on a specific ONT Tree . . . . . . . . . . . . . . . . . . . . . 981 52.2 Configure NTP parameters on a specific ONT . . . . . . . . . . . . . . . . . . . . . . . . 982
53- Equipment Status Commands 53.1 Equipment Status Command Tree . . . . 53.2 Slot Status Command . . . . . . . . . . 53.3 Profile Description Command . . . . . . 53.4 Applique Status Command . . . . . . . . 53.5 Shelf Summary Status Command . . . . 53.6 Protection Element Status Command . . 53.7 Protection Group Status Command . . . 53.8 External-link-host Status Commands . . 53.9 External-link-remote Status Commands . 53.10 SFP/XFP Diagnostics Status Command 53.11 Board Temperature Status Command . 53.12 Transceiver Inventory Status Command 53.13 NE Status Command . . . . . . . . . . 53.14 Rack Status Command . . . . . . . . . 53.15 Shelf Status Command . . . . . . . . .
984 . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
54.1 ONT Status Command Tree . . . . . . . . . 54.2 ONT Interface Command . . . . . . . . . . . 54.3 ONT Interface Operational Status Command 54.4 ONT Card Status Command . . . . . . . . . 54.5 ONT Software Control Status Command . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
54- ONT Status Commands
x
Released
. 985 . 986 . 991 . 992 . 996 . 998 .1001 .1004 .1008 .1011 .1017 .1019 .1022 .1024 .1026
1029
3HH-08079-DDAA-TCZZA
.1030 .1032 .1034 .1037 .1039
01
Contents
54.6 ONT Software Version Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . .1040 54.7 ONT Software Download Status Command . . . . . . . . . . . . . . . . . . . . . . . . . .1041 54.8 ONT Data Store Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1044 54.9 ONT Optics Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1046 54.10 ONT Optics History Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .1049 54.11 ONT Power Shedding Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . .1052 54.12 GPON ont Olt-side on-demand Aggregate gem Current-Interval Performance Monitoring 1054 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.13 GPON ont Olt-side on-demand aggregate gem Previous-Interval Performance Monitoring1056 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.14 GPON ont Ont-side aggregate gem Current-Interval Performance Monitoring Command 1058 54.15 GPON ont Ont-side Aggregate gem Previous-Interval Performance Monitoring Command1060 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.16 GPON ont Olt-side Always-on Aggregate gem Current-Interval Performance Monitoring 1062 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.17 GPON Ont Olt-side Always-on Aggregate gem Previous-Interval Performance Monitoring1064 Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54.18 Multicast TC-layer Current Interval Performance Data Status Command . . . . . . . . .1066 54.19 Multicast TC-layer Previous Interval Performance Data Status Command . . . . . . . . .1068 54.20 Fec TC-layer Current Interval Counters Command . . . . . . . . . . . . . . . . . . . . .1070 54.21 ONT Software Control List Status Command . . . . . . . . . . . . . . . . . . . . . . . .1072
55- Trap Status Commands
1073
55.1 Trap Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1074 55.2 Trap Manager Queue Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .1075
56- Alarm Delta Log Status Commands 56.1 Alarm Delta Log Status Command Tree . . . . . . 56.2 Alarm Generic Delta Alarm Log Status Command 56.3 Indeterminate Alarm Delta Log Status Command . 56.4 Warning Alarm Delta Log Status Command . . . . 56.5 Minor Alarm Delta Log Status Command . . . . . 56.6 Major Alarm Delta Log Status Command . . . . . 56.7 Critical Alarm Delta Log Status Command . . . .
1076 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
57.1 Alarm Log Status Command Tree . . . . . . . . . . . . . . . . 57.2 Alarm Log Status Command . . . . . . . . . . . . . . . . . . . 57.3 Equipment Alarm Log Status Command . . . . . . . . . . . . . 57.4 Equipment Holder Alarm Log Status Command . . . . . . . . . 57.5 Equipment Holder Extended Alarm Log Status Command . . . 57.6 Plug-in Unit Alarm Log Status Command . . . . . . . . . . . . 57.7 ATM Alarm Log Status Command . . . . . . . . . . . . . . . . 57.8 Ethernet Interface Alarm Log Status Command . . . . . . . . . 57.9 Software Management Alarm Log Status Command . . . . . . 57.10 xDSL Common Alarm Log Status Command . . . . . . . . . 57.11 xDSL Near-end Alarm Log Status Command . . . . . . . . . 57.12 xDSL Far-end Alarm Log Status Command . . . . . . . . . . 57.13 TCA xDSL Alarm Log Status Command . . . . . . . . . . . . 57.14 Vectoring Line Alarm Log Status Command . . . . . . . . . . 57.15 Electrical-to-Optical Conversion Alarm Log Status Command 57.16 Authentication Alarm Log Status Command . . . . . . . . . . 57.17 xDSL Bonding Alarm Log Status Command . . . . . . . . . . 57.18 Redundancy Alarm Log Status Command . . . . . . . . . . . 57.19 Custom Alarm Log Status Command . . . . . . . . . . . . . . 57.20 SFP Alarm Log Status Command . . . . . . . . . . . . . . . 57.21 Custom External Alarm Log Status Command . . . . . . . . . 57.22 Plug In Unit Extended Alarm Log Status Command . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
57- Alarm Log Status Commands
3HH-08079-DDAA-TCZZA 01
.1077 .1078 .1080 .1102 .1124 .1146 .1168
1190
Released
.1192 .1195 .1199 .1202 .1207 .1209 .1213 .1215 .1216 .1219 .1222 .1225 .1229 .1235 .1237 .1239 .1241 .1245 .1247 .1253 .1257 .1259
xi
Contents
57.23 Alarm Periodic Sealing Current Status Commands . . . . . 57.24 SIP Server Alarm Log Status Commands . . . . . . . . . . 57.25 SIP VSP Alarm Log Status Commands . . . . . . . . . . . 57.26 SIP Dial Plan Alarm Log Status Commands . . . . . . . . . 57.27 SIP Slot Alarm Log Status Commands . . . . . . . . . . . . 57.28 SIP Termination Alarm Log Status Commands . . . . . . . 57.29 Shdsl Alarm Log Status Command . . . . . . . . . . . . . . 57.30 Shdsl Alarm Log Status Command . . . . . . . . . . . . . . 57.31 Megaco Media Gateway Alarm Log Status Command . . . 57.32 Megaco Signaling Gateway Alarm Log Status Command . . 57.33 Megaco Plug Unit Alarm Log Status Command . . . . . . . 57.34 Megaco Termination Alarm Log Status Command . . . . . 57.35 Megaco Signaling Lt Alarm Log Status Command . . . . . . 57.36 Ima-Group Alarm Log Status Command . . . . . . . . . . . 57.37 Ima-Link Alarm Log Status Command . . . . . . . . . . . . 57.38 Ether-Tca Alarm Log Status Command . . . . . . . . . . . 57.39 Ether-Sfp Alarm Log Status Command . . . . . . . . . . . . 57.40 Alarm Qos Slot Log Status Commands . . . . . . . . . . . 57.41 Alarm Qos Queue Log Status Commands . . . . . . . . . . 57.42 Log File Transfer Server Alarm Log Status Command . . . 57.43 Log Lsm Redundancy Alarm Log Status Command . . . . . 57.44 Log L2 Forward Alarm Log Status Command . . . . . . . . 57.45 External Device Alarm Log Status Command . . . . . . . . 57.46 Multicast Source Alarm Log Status Command . . . . . . . . 57.47 Vlanport Alarm Log Status Command . . . . . . . . . . . . 57.48 BGP Alarm Log Status Command . . . . . . . . . . . . . . 57.49 RIP Alarm Log Status Command . . . . . . . . . . . . . . . 57.50 LAG Alarm Log Status Command . . . . . . . . . . . . . . 57.51 ihub-general Alarm Log Status Command . . . . . . . . . . 57.52 VPRN Alarm Log Status Command . . . . . . . . . . . . . 57.53 ISIS Alarm Log Status Command . . . . . . . . . . . . . . 57.54 Ospf Alarm Log Status Command . . . . . . . . . . . . . . 57.55 ihub-l2forward Alarm Log Status Command . . . . . . . . . 57.56 Vpls Alarm Log Status Command . . . . . . . . . . . . . . 57.57 IHUB-Eqip Alarm Log Status Command . . . . . . . . . . . 57.58 IHUB-Link Alarm Log Status Command . . . . . . . . . . . 57.59 LDP Alarm Log Status Command . . . . . . . . . . . . . . 57.60 MPLS Alarm Log Status Command . . . . . . . . . . . . . 57.61 SDP Alarm Log Status Command . . . . . . . . . . . . . . 57.62 IHUB IPV6 Alarm Log Status Command . . . . . . . . . . . 57.63 EPIPE Alarm Log Status Command . . . . . . . . . . . . . 57.64 EPIPE Alarm Log Status Command . . . . . . . . . . . . . 57.65 IHUB Lawful Intercept Alarm Log Status Command . . . . . 57.66 Sync Clock Alarm Log Status Command . . . . . . . . . . . 57.67 Equipment Supplemental Alarm Log Status Command . . . 57.68 Otdr Alarm Log Status Command . . . . . . . . . . . . . . 57.69 Management Security Access Alarm Log Status Command
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
58- Alarm Snap-shot Status Commands 58.1 Alarm Snap-shot Status Command Tree . . . . . . . . . 58.2 Alarm Snapshot Status Command . . . . . . . . . . . . . 58.3 Alarm Snapshot Equipment Status Command . . . . . . 58.4 Equipment Holder Alarm Log Status Command . . . . . . 58.5 Equipment Holder Alarm Extended Log Status Command 58.6 Plug-in Unit Alarm Log Status Command . . . . . . . . . 58.7 ATM Alarm Log Status Command . . . . . . . . . . . . . 58.8 Alarm Snapshot Ethernet Interface Status Command . . 58.9 Alarm Snapshot Software Management Status Command 58.10 Alarm xDSL Snapshot Status Command . . . . . . . . .
xii
Released
.1263 .1265 .1267 .1269 .1270 .1272 .1276 .1279 .1282 .1283 .1284 .1286 .1288 .1290 .1293 .1296 .1298 .1301 .1304 .1306 .1308 .1310 .1312 .1313 .1315 .1318 .1320 .1322 .1324 .1326 .1328 .1330 .1333 .1335 .1338 .1341 .1344 .1346 .1348 .1350 .1352 .1354 .1356 .1358 .1361 .1363 .1365
1367 . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
3HH-08079-DDAA-TCZZA
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
.1369 .1372 .1376 .1378 .1381 .1382 .1385 .1387 .1388 .1390
01
Contents
58.11 TCA xDSL Alarm Log Status Command . . . . . . . . . . . . . . . . . 58.12 Alarm Vectoring Line Snapshot Status Command . . . . . . . . . . . . 58.13 Alarm Electrical-to-Optical Conversion for Snapshot Status Command 58.14 Authentication Alarms for Snapshot Status Command . . . . . . . . . 58.15 Alarm xDSL Bonding Snap Shot Status Command . . . . . . . . . . . 58.16 Alarm Redundancy Snapshot Status Command . . . . . . . . . . . . . 58.17 Alarm Custom Snapshot Status Command . . . . . . . . . . . . . . . 58.18 Alarm SFP Snapshot Status Command . . . . . . . . . . . . . . . . . 58.19 Alarm Custom External Snap Shot Status Command . . . . . . . . . . 58.20 Alarm Plug In Unit Extended Snap Shot Status Command . . . . . . . 58.21 Alarm Periodic Sealing Current Status Command . . . . . . . . . . . . 58.22 Alarm Snap-shot SIP Server Status Command . . . . . . . . . . . . . 58.23 Alarm Snap-shot SIP VSP Status Command . . . . . . . . . . . . . . 58.24 Alarm Snap-shot SIP Dial Plan Status Command . . . . . . . . . . . . 58.25 Alarm Snap-shot SIP Slot Status Command . . . . . . . . . . . . . . . 58.26 Alarm Snap-shot SIP Termination Status Command . . . . . . . . . . 58.27 Alarm Snap-shot Megaco Media Gateway Status Command . . . . . . 58.28 Alarm Snap-shot Megaco Signaling Gateway Status Command . . . . 58.29 Alarm Snap-shot Megaco Plug Unit Status Command . . . . . . . . . 58.30 Alarm Snap-shot Megaco Termination Status Command . . . . . . . . 58.31 Alarm Snap-shot Megaco Signaling Lt Status Command . . . . . . . . 58.32 Alarm Snap-shot Shdsl Status Command . . . . . . . . . . . . . . . . 58.33 Alarm Snap-shot Shdsl Status Command . . . . . . . . . . . . . . . . 58.34 Alarm Snap-shot Ima-Group Status Command . . . . . . . . . . . . . 58.35 Alarm Snap-shot Ima-Link Status Command . . . . . . . . . . . . . . 58.36 Alarm Snap-shot Ether-Tca Status Command . . . . . . . . . . . . . . 58.37 Alarm Snap-shot Ether-Sfp Status Command . . . . . . . . . . . . . . 58.38 Alarm Snap-shot SIP Termination Status Command . . . . . . . . . . 58.39 Alarm Snap-shot SIP Termination Status Command . . . . . . . . . . 58.40 Alarm File Transfer Server Status Command . . . . . . . . . . . . . . 58.41 Alarm Lsm Redundancy Status Command . . . . . . . . . . . . . . . . 58.42 Alarm L2 Forward Status Command . . . . . . . . . . . . . . . . . . . 58.43 Alarm Snap-shot External Device Status Command . . . . . . . . . . 58.44 Alarm Snap-shot Multicast Source Status Command . . . . . . . . . . 58.45 Vlanport Alarm Snapshot Status Command . . . . . . . . . . . . . . . 58.46 BGP Alarm SnapShot Status Command . . . . . . . . . . . . . . . . . 58.47 RIP Alarm SnapShot Status Command . . . . . . . . . . . . . . . . . 58.48 LAG Alarm SnapShot Status Command . . . . . . . . . . . . . . . . . 58.49 ihub-general Alarm SnapShot Status Command . . . . . . . . . . . . 58.50 VPRN Alarm SnapShot Status Command . . . . . . . . . . . . . . . . 58.51 ISIS Alarm SnapShot Status Command . . . . . . . . . . . . . . . . . 58.52 OSPF Alarm SnapShot Status Command . . . . . . . . . . . . . . . . 58.53 ihub-l2forward Alarm SnapShot Status Command . . . . . . . . . . . . 58.54 VPLS Alarm SnapShot Status Command . . . . . . . . . . . . . . . . 58.55 IHUB-Equip Alarm SnapShot Status Command . . . . . . . . . . . . . 58.56 IHUB-link Alarm SnapShot Status Command . . . . . . . . . . . . . . 58.57 LDP Alarm SnapShot Status Command . . . . . . . . . . . . . . . . . 58.58 Alarm SnapShot MPLS Status Command . . . . . . . . . . . . . . . . 58.59 Alarm SnapShot SDP Status Command . . . . . . . . . . . . . . . . . 58.60 IHUB IPV6 Alarm SnapShot Status Command . . . . . . . . . . . . . 58.61 Alarm SnapShot EPIPE Status Command . . . . . . . . . . . . . . . . 58.62 Alarm SnapShot EPIPE Status Command . . . . . . . . . . . . . . . . 58.63 IHUB Lawful Intercept Alarm SnapShot Status Command . . . . . . . 58.64 Sync Clock Alarm SnapShot Status Command . . . . . . . . . . . . . 58.65 Alarm Snapshot Equipment Supplemental Status Command . . . . . . 58.66 Otdr Alarm SnapShot Status Command . . . . . . . . . . . . . . . . . 58.67 Sync Clock Alarm SnapShot Status Command . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
59- Current Alarm Status Commands
3HH-08079-DDAA-TCZZA 01
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.1394 .1398 .1400 .1401 .1402 .1405 .1406 .1410 .1414 .1416 .1419 .1421 .1422 .1424 .1425 .1427 .1430 .1431 .1432 .1433 .1435 .1437 .1439 .1441 .1443 .1445 .1447 .1449 .1451 .1453 .1454 .1456 .1458 .1459 .1461 .1463 .1465 .1466 .1468 .1470 .1472 .1474 .1476 .1478 .1480 .1482 .1484 .1486 .1488 .1490 .1492 .1493 .1495 .1497 .1499 .1501 .1503
1505
Released
xiii
Contents
59.1 Current Alarm Status Command Tree . . . . . . . . . . . . . . . . 59.2 Alarm Current Status Command . . . . . . . . . . . . . . . . . . . 59.3 Equipment Current Alarm Status Command . . . . . . . . . . . . 59.4 Equipment Holder Current Alarm Status Command . . . . . . . . 59.5 Equipment Holder Extended Current Alarm Status Command . . . 59.6 Plug-in Unit Current Alarm Status Command . . . . . . . . . . . . 59.7 ATM Current Alarm Status Command . . . . . . . . . . . . . . . . 59.8 Ethernet Interface Current Alarm Status Command . . . . . . . . . 59.9 Software Management Current Alarm Status Command . . . . . . 59.10 xDSL Current Alarm Status Command . . . . . . . . . . . . . . . 59.11 TCA xDSL Current Alarm Status Command . . . . . . . . . . . . 59.12 Vectoring Line Current Alarm Status Command . . . . . . . . . . 59.13 Electrical-to-Optical Conversion Current Alarm Status Command 59.14 Authentication Current Alarm Status Command . . . . . . . . . . 59.15 xDSL Bonding Current Alarm Status Command . . . . . . . . . . 59.16 Redundancy Current Alarm Status Command . . . . . . . . . . . 59.17 Custom Current Alarm Status Command . . . . . . . . . . . . . 59.18 SFP Current Alarm Status Command . . . . . . . . . . . . . . . 59.19 Custom External Current Alarm Status Command . . . . . . . . . 59.20 Plug In Unit Extended Current Alarm Status Command . . . . . . 59.21 Alarm Periodic Sealing Current Status Command . . . . . . . . . 59.22 SIP Server Current Alarm Status Command . . . . . . . . . . . . 59.23 SIP VSP Current Alarm Status Command . . . . . . . . . . . . . 59.24 SIP Dial Plan Current Alarm Status Command . . . . . . . . . . 59.25 SIP Slot Current Alarm Status Command . . . . . . . . . . . . . 59.26 SIP Termination Current Alarm Status Command . . . . . . . . . 59.27 Megaco Media Gateway Current Alarm Status Command . . . . 59.28 Megaco Signaling Gateway Current Alarm Status Command . . . 59.29 Megaco Plugin Unit Current Alarm Status Command . . . . . . . 59.30 Megaco Termination Current Alarm Status Command . . . . . . 59.31 Megaco Signaling Lt Current Alarm Status Command . . . . . . 59.32 Shdsl Current Alarm Status Command . . . . . . . . . . . . . . . 59.33 Shdsl Current Alarm Status Command . . . . . . . . . . . . . . . 59.34 Ima-Group Current Alarm Status Command . . . . . . . . . . . . 59.35 Ima-Link Current Alarm Status Command . . . . . . . . . . . . . 59.36 Alarm Current Ether-Tca Status Command . . . . . . . . . . . . 59.37 Alarm Current Ether-Sfp Status Command . . . . . . . . . . . . 59.38 Alarm Current Qos Slot Status Command . . . . . . . . . . . . . 59.39 Alarm Current Qos Queue Status Command . . . . . . . . . . . 59.40 Alarm File Transfer Server Status Command . . . . . . . . . . . 59.41 Alarm LSM Redundancy Status Command . . . . . . . . . . . . 59.42 Alarm L2 Forward Status Command . . . . . . . . . . . . . . . . 59.43 Alarm Current External Device Status Command . . . . . . . . . 59.44 Multicast Source Current Alarm Status Command . . . . . . . . . 59.45 Vlanport Current Alarm Status Command . . . . . . . . . . . . . 59.46 Vlanport Current Alarm Status Command . . . . . . . . . . . . . 59.47 BGP Current Alarm Status Command . . . . . . . . . . . . . . . 59.48 RIP Current Alarm Status Command . . . . . . . . . . . . . . . . 59.49 LAG Current Alarm Status Command . . . . . . . . . . . . . . . 59.50 ihub-general Current Alarm Status Command . . . . . . . . . . . 59.51 VPRN Current Alarm Status Command . . . . . . . . . . . . . . 59.52 ISIS Current Alarm Status Command . . . . . . . . . . . . . . . 59.53 Ospf Current Alarm Status Command . . . . . . . . . . . . . . . 59.54 ihub-l2forward Current Alarm Status Command . . . . . . . . . . 59.55 VPLS Current Alarm Status Command . . . . . . . . . . . . . . . 59.56 IHUB-Equip Current Alarm Status Command . . . . . . . . . . . 59.57 ihub-link Current Alarm Status Command . . . . . . . . . . . . . 59.58 LDP Current Alarm Status Command . . . . . . . . . . . . . . . 59.59 MPLS Current Alarm Status Command . . . . . . . . . . . . . . 59.60 SDP Current Alarm Status Command . . . . . . . . . . . . . . .
xiv
Released
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3HH-08079-DDAA-TCZZA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.1507 .1510 .1514 .1516 .1519 .1520 .1523 .1525 .1526 .1528 .1532 .1536 .1538 .1540 .1541 .1544 .1545 .1549 .1553 .1555 .1559 .1561 .1562 .1564 .1565 .1567 .1570 .1571 .1572 .1574 .1576 .1578 .1580 .1582 .1584 .1586 .1588 .1590 .1592 .1594 .1595 .1597 .1599 .1600 .1602 .1604 .1606 .1608 .1609 .1611 .1613 .1615 .1617 .1619 .1621 .1623 .1625 .1627 .1629 .1631
01
Contents
59.61 IHUB IPV6 Current Alarm Status Command . . . . . . . . . . . 59.62 EPIPE Current Alarm Status Command . . . . . . . . . . . . . 59.63 EPIPE Current Alarm Status Command . . . . . . . . . . . . . 59.64 IHUB Lawful Intercept Current Alarm Status Command . . . . . 59.65 Sync Clock Current Alarm Status Command . . . . . . . . . . 59.66 Equipment Supplemental Current Alarm Status Command . . . 59.67 Otdr Current Alarm Status Command . . . . . . . . . . . . . . 59.68 Management Security Access Current Alarm Status Command
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
60- ATM Status Commands
.1633 .1635 .1636 .1638 .1640 .1642 .1644 .1646
1648
60.1 ATM Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.2 ATM Interface Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.3 PVC Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.4 TC Adapter Protocol Interval Status Command . . . . . . . . . . . . . . . . . . . 60.5 TC Adapter Protocol Current Quarter Performance Data Command . . . . . . . . 60.6 TC Adapter Protocol Current Day Performance Data Command . . . . . . . . . . 60.7 TC Adapter Protocol Performance Data for Previous Quarter Intervals Command 60.8 TC Adapter Protocol Performance Data for Previous Day Intervals Command . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
61- Bridge Status Commands
.1649 .1650 .1652 .1654 .1656 .1658 .1660 .1662
1664
61.1 Bridge Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1665
62- VLAN Status Commands
1666
62.1 VLAN Status Command Tree . . . . . . . . . . . . . . . . . . . . . . 62.2 Global VLAN Status Command . . . . . . . . . . . . . . . . . . . . . 62.3 Residential Bridge VLAN Summary Status Command . . . . . . . . . 62.4 Residential Bridge VLAN Extensive Status Command . . . . . . . . . 62.5 Cross-connect VLAN Status Command . . . . . . . . . . . . . . . . . 62.6 Stacked VLAN Status Command . . . . . . . . . . . . . . . . . . . . 62.7 Stacked QoS VLAN Status Command . . . . . . . . . . . . . . . . . . 62.8 QoS C-VLAN Status Command . . . . . . . . . . . . . . . . . . . . . 62.9 Layer-2 Terminated VLAN Status Command . . . . . . . . . . . . . . 62.10 VLAN Name Mapping Status Command . . . . . . . . . . . . . . . . 62.11 VLAN Filtering Database Per LIM Status Command . . . . . . . . . 62.12 Bridge Port Filtering Database Status Command . . . . . . . . . . . 62.13 VLAN Priority Regeneration Profile Status Command . . . . . . . . . 62.14 Duplicate MAC Alarm Status Command . . . . . . . . . . . . . . . . 62.15 Port Event Status Command . . . . . . . . . . . . . . . . . . . . . . 62.16 Port Statistics for Current Quarter Status Command . . . . . . . . . 62.17 Port Statistics for Current Day Status Command . . . . . . . . . . . 62.18 Port Statistics for Previous Quarter Intervals Status Command . . . . 62.19 Port Statistics for Previous Day Intervals Status Command . . . . . . 62.20 VLAN Port Statistics for Current Quarter Status Command . . . . . . 62.21 VLAN Port Statistics for Current Day Status Command . . . . . . . . 62.22 VLAN Port Statistics for Previous Quarter Intervals Status Command 62.23 VLAN Port Statistics for Previous Day Intervals Status Command . . 62.24 VLAN Filtering Database Status Command . . . . . . . . . . . . . . 62.25 P-bit Traffic Counters Status Command . . . . . . . . . . . . . . . . 62.26 Current VLAN Filtering Database Status Command . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
63- QOS Status Commands 63.1 QOS Status Command Tree . . . . . . . . . . 63.2 QoS Session Profile Status Command . . . . 63.3 QoS Marker Profile Status Command . . . . . 63.4 QoS Policer Profile Status Command . . . . . 63.5 QoS Queue Profile Status Command . . . . . 63.6 QoS Scheduler Node Profile Status Command
3HH-08079-DDAA-TCZZA 01
.1667 .1669 .1670 .1672 .1676 .1680 .1682 .1684 .1685 .1687 .1688 .1691 .1694 .1697 .1700 .1702 .1705 .1708 .1711 .1714 .1717 .1720 .1723 .1726 .1729 .1732
1734 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
Released
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
.1735 .1737 .1738 .1739 .1740 .1741
xv
Contents
63.7 QoS CAC Profile Status Command . . . . . . . . . . . . . . . . . 63.8 QoS Policy Profile Status Command . . . . . . . . . . . . . . . . 63.9 QoS L2 Filter Profile Status Command . . . . . . . . . . . . . . . 63.10 QoS L3 Filter Profile Status Command . . . . . . . . . . . . . . . 63.11 QoS Policy Action Profile Status Command . . . . . . . . . . . . 63.12 QoS IngressQoS Profile Status Command . . . . . . . . . . . . . 63.13 QoS Shaper Profile Status Command . . . . . . . . . . . . . . . 63.14 QoS Bandwidth Profile Status Command . . . . . . . . . . . . . 63.15 QoS DSL Bandwidth Status Command . . . . . . . . . . . . . . 63.16 QoS Shdsl Bandwidth Status Command . . . . . . . . . . . . . . 63.17 QoS Ethernet Bandwidth Status Command . . . . . . . . . . . . 63.18 QoS Interface Bandwidth Status Command . . . . . . . . . . . . 63.19 QoS Total Buffer Overflow Statistics for Previous Quarter . . . . 63.20 QoS Total Buffer Overflow Statistics for Current Quarter . . . . . 63.21 QoS Total Buffer Overflow Statistics for Previous Day Command 63.22 QoS Total Buffer Overflow Statistics for Current Day . . . . . . . 63.23 QoS Total Buffer Overflow Statistics Total Status Command . . . 63.24 QoS Interface Buffer Overflow Statistics for Previous Quarter . . 63.25 QoS Interface Buffer Overflow Statistics for Current Quarter . . . 63.26 QoS Fan Out Statistics for Previous Quarter . . . . . . . . . . . . 63.27 QoS Fan Out Statistics for Current 15 minutes . . . . . . . . . . 63.28 QoS Fan Out Statistics for Previous Day . . . . . . . . . . . . . . 63.29 QoS Fan Out Statistics for Current Day . . . . . . . . . . . . . . 63.30 QoS LT Queue Overflow Statistics for Previous Quarter . . . . . 63.31 QoS LT Queue Overflow Statistics for current Quarter . . . . . . 63.32 QoS TC2QMapping Status Command . . . . . . . . . . . . . . . 63.33 Qos Pcc Rules Status Command . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
64- ARP-RELAY Status Commands 64.1 ARP-RELAY Status Command Tree . . . . . . . . 64.2 ARP-RELAY statistics Status Command . . . . . 64.3 ARP-RELAY summary statistics Status Command 64.4 ARP-RELAY detailed statistics Status Command .
1797 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
65.1 xDSL Status Command Tree . . . . . . . . . . . . . . . . . . 65.2 xDSL Profiles Status Command . . . . . . . . . . . . . . . . 65.3 xDSL PM Interval Per Interface Status Command . . . . . . 65.4 xDSL Operational Data Near End Line Status Command . . 65.5 xDSL Operational Data Near End Channel Status Command 65.6 xDSL Operational Data Far End Line Status Command . . . 65.7 xDSL Operational Data Far End Channel Status Command . 65.8 xDSL Operational Data Statistics . . . . . . . . . . . . . . . 65.9 xDSL Carrier Data Near End Status Command . . . . . . . . 65.10 xDSL Carrier Data Far End Status Command . . . . . . . . 65.11 xDSL Failure Status Near End Status Command . . . . . . 65.12 xDSL Failure Status Far End Status Command . . . . . . . 65.13 xDSL Counters Near End Line Current 15 Min . . . . . . . 65.14 xDSL Counters Near End Line Current Day . . . . . . . . . 65.15 xDSL Counters Near End Line Previous 15 Min . . . . . . . 65.16 xDSL Counters Near End Of Line Previous Day . . . . . . . 65.17 xDSL Counters Near End Channel Current 15 Min . . . . . 65.18 xDSL Counters Near End Channel Current Day . . . . . . . 65.19 xDSL Counters Near End Channel Previous 15 Min . . . . 65.20 xDSL Counters Near End Channel Previous Day . . . . . . 65.21 xDSL Counters Far End Line Current 15 Min . . . . . . . . 65.22 xDSL Counters Far End Line Current Day . . . . . . . . . . 65.23 xDSL Counters Far End Line Previous 15 Min . . . . . . . . 65.24 xDSL Counters Far End Line Previous Day . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
65- xDSL Status Commands
xvi
Released
.1742 .1743 .1744 .1745 .1746 .1747 .1748 .1749 .1750 .1752 .1754 .1756 .1759 .1762 .1765 .1768 .1771 .1775 .1778 .1781 .1783 .1785 .1787 .1789 .1791 .1793 .1795
.1798 .1799 .1801 .1803
1806
3HH-08079-DDAA-TCZZA
.1808 .1811 .1813 .1815 .1824 .1826 .1833 .1835 .1839 .1844 .1847 .1850 .1853 .1855 .1857 .1859 .1861 .1863 .1865 .1867 .1869 .1871 .1873 .1875
01
Contents
65.25 xDSL Counters Far End Channel Current 15 Min . . . . . . 65.26 xDSL Counters Far End Channel Current Day . . . . . . . . 65.27 xDSL Counters Far End Channel Previous 15 Min . . . . . 65.28 xDSL Counters Far End Channel Previous Day . . . . . . . 65.29 xDSL Inventory XT/RT Status Command . . . . . . . . . . 65.30 xDSL Board Capability Status Command . . . . . . . . . . 65.31 xDSL Low Rate Alarm Timestamp Command . . . . . . . . 65.32 xDSL Low Rate Alarm Line Bitmap Status Command . . . . 65.33 xDSL Low Rate Alarm Linkup Record Data Command . . . 65.34 xDSL INS Near End Operational Data Status Command . . 65.35 xDSL INS Near End Current 15Min Data Status Command . 65.36 xDSL INS Near End Current 15Min IAT Histogram . . . . . 65.37 xDSL INS Near End Current 15Min EINP Histogram . . . . 65.38 xDSL INS Near End Current Day Data Status Command . . 65.39 xDSL INS Near End Current Day IAT Histogram . . . . . . 65.40 xDSL INS Near End Current Day EINP Histogram . . . . . 65.41 xDSL INS Near End Previous 15Min Data Status Command 65.42 xDSL INS Near End Previous 15Min IAT Histogram . . . . 65.43 xDSL INS Near End Previous 15Min EINP Histogram . . . 65.44 xDSL INS Near End Previous Day Data Status Command . 65.45 xDSL INS Near End Previous Day IAT Histogram . . . . . . 65.46 xDSL INS Near End Previous Day EINP Histogram . . . . . 65.47 xDSL INS Far End Operational Data Status Command . . . 65.48 xDSL INS Far End Current 15Min Data Status Command . 65.49 xDSL INS Far End Current 15Min IAT Histogram . . . . . . 65.50 xDSL INS Far End Current 15Min EINP Histogram . . . . . 65.51 xDSL INS Far End Current Day Data Status Command . . . 65.52 xDSL INS Far End Current Day IAT Histogram . . . . . . . 65.53 xDSL INS Far End Current Day EINP Histogram . . . . . . 65.54 xDSL INS Far End Previous 15Min Data Status Command . 65.55 xDSL INS Far End Previous 15Min IAT Histogram . . . . . 65.56 xDSL INS Far End Previous 15Min EINP Histogram . . . . 65.57 xDSL INS Far End Previous Day Status Command . . . . . 65.58 xDSL INS Far End Previous Day IAT Histogram . . . . . . 65.59 xDSL INS Far End Previous Day EINP Histogram . . . . . . 65.60 xDSL Vectoring Disturbers Status Command . . . . . . . . 65.61 xDSL Vectoring Carrier Data Near End Status Command . 65.62 xDSL Vectoring Carrier Data Far End Status Command . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
66- Configuration Data Status Commands
1934
66.1 Configuration Data Status Command Tree . . . . . . . . 66.2 xDSL Port Configuration Status Command . . . . . . . . 66.3 xDSL Port ATM Configuration Status Command . . . . . 66.4 xDSL Port ATM Interface Configuration Status Command 66.5 xDSL Port Interface Configuration Status Command . . . 66.6 xDSL IGMP Configuration Status Command . . . . . . . 66.7 xDSL Security PAE Configuration Status Command . . . 66.8 xDSL BridgePort Configuration Status Command . . . . 66.9 xDSL QoS Configuration Status Command . . . . . . . . 66.10 xDSL PPPoX Relay Configuration Status Command . . 66.11 xDSL Bonding Group Configuration Status Command .
. . . . . . . . . . .
. . . . . . . . . . .
67- Operational Data Status Commands 67.1 Operational Data Status Command Tree . . . . . . 67.2 xDSL Port Operational Status Command . . . . . . 67.3 xDSL BridgePort Operational Status Command . . 67.4 xDSL Port ATM Operational Status Command . . . 67.5 xDSL Port Interface Configuration Status Command 67.6 xDSL IGMP Operational Status Command . . . . .
3HH-08079-DDAA-TCZZA 01
.1877 .1879 .1881 .1883 .1885 .1887 .1893 .1894 .1895 .1898 .1900 .1901 .1902 .1903 .1904 .1905 .1906 .1907 .1908 .1909 .1910 .1911 .1912 .1914 .1915 .1916 .1917 .1918 .1919 .1920 .1921 .1922 .1923 .1924 .1925 .1926 .1928 .1931
.1935 .1937 .1943 .1945 .1947 .1949 .1951 .1954 .1958 .1960 .1962
1964 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
Released
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
.1965 .1966 .1970 .1972 .1974 .1976
xvii
Contents
67.7 xDSL Port Ip Bridge Operational Status Command . . . . . . . . . . . . . . . . . . . . . .1979 67.8 xDSL QoS Opertaional Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . .1981
68- Gpon xDSL Status Commands
1983
68.1 Gpon xDSL Status Command Tree . . . . . . . . . . . . . . . . . 68.2 Gpon xDSL Profiles Status Command . . . . . . . . . . . . . . . . 68.3 Gpon xDSL PM Interval Per Interface Status Command . . . . . . 68.4 Gpon xDSL Operational Data Near End Line Status Command . . 68.5 Gpon xDSL Operational Data Near End Channel Status Command 68.6 Gpon xDSL Operational Data Far End Line Status Command . . . 68.7 Gpon xDSL Operational Data Far End Channel Status Command . 68.8 Gpon xDSL Carrier Data Near End Status Command . . . . . . . 68.9 Gpon xDSL Carrier Data Far End Status Command . . . . . . . . 68.10 Gpon xDSL Failure Status Near End Status Command . . . . . . 68.11 Gpon xDSL Failure Status Far End Status Command . . . . . . . 68.12 Gpon xDSL Counters Near End Line Current 15 Min . . . . . . . 68.13 Gpon xDSL Counters Near End Line Previous 15 Min . . . . . . 68.14 Gpon xDSL Counters Near End Channel Current 15 Min . . . . . 68.15 Gpon xDSL Counters Near End Channel Previous 15 Min . . . . 68.16 Gpon xDSL Counters Far End Line Current 15 Min . . . . . . . . 68.17 Gpon xDSL Counters Far End Line Previous 15 Min . . . . . . . 68.18 Gpon xDSL Counters Far End Channel Current 15 Min . . . . . . 68.19 Gpon xDSL Counters Far End Channel Previous 15 Min . . . . . 68.20 Gpon xDSL XTU-R Inventory Status Command . . . . . . . . . . 68.21 Gpon xDSL XTU-C Inventory Status Command . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
69- xDSL Bonding Status Commands
2033
69.1 xDSL Bonding Status Command Tree . . . . . . . . . . . . . 69.2 xDSL Bonding Profiles Status Command . . . . . . . . . . . 69.3 xDSL Bonding Near End Operational Data Status Command 69.4 xDSL Bonding Far End Operational Data Status Command . 69.5 xDSL Bonding Group Operational Data Command . . . . . . 69.6 xDSL Bonding Link Operational Data Command . . . . . . . 69.7 xDSL Bonding Near End Failure Status Command . . . . . . 69.8 xDSL Bonding Far End Failure Status Command . . . . . . . 69.9 xDSL Bonding Group Failure Status Command . . . . . . . . 69.10 xDSL Bonding Group Summary Info Command . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
70- PPPoEL2 Statistics Status Commands 70.1 PPPoEL2 Statistics Status Command Tree . . . . 70.2 PPPoEL2 Statistics Status Command . . . . . . . 70.3 PPPoEL2 detailed Statistics Status Command . . 70.4 PPPoEL2 On-demand Statistics Status Command
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
.2052 .2053 .2055 .2057
2059
71.1 Pon Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . 71.2 PON Bit Error Status Command . . . . . . . . . . . . . . . . . . . . . . . 71.3 Aggregate Pon Gem Port Current Interval Status Command . . . . . . . . 71.4 Aggregate Pon Gem Port Previous Interval Status Command . . . . . . . 71.5 Multicast TC-layer Current Interval Performance Data Status Command . 71.6 Multicast TC-layer Previous Interval Performance Data Status Command 71.7 PON Optics Operational Information Status Command . . . . . . . . . . . 71.8 PON Software Download Status Command . . . . . . . . . . . . . . . . . 71.9 PON Optics Status Command . . . . . . . . . . . . . . . . . . . . . . . . 71.10 Pon Interface protection status Command . . . . . . . . . . . . . . . . .
Released
.2034 .2035 .2036 .2038 .2040 .2042 .2044 .2046 .2048 .2050
2051
71- Pon Status Commands
xviii
.1984 .1986 .1987 .1989 .1993 .1995 .1997 .1999 .2004 .2007 .2010 .2013 .2015 .2017 .2019 .2021 .2023 .2025 .2027 .2029 .2031
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
3HH-08079-DDAA-TCZZA
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
.2060 .2061 .2063 .2064 .2066 .2068 .2070 .2072 .2073 .2075
01
Contents
72- Uni Ont Gem-port Status Commands
2077
72.1 Uni Ont Gem-port Status Command Tree . . . . . . . . . . 72.2 Uni Gem-port Olt-side Current Interval Status Command . 72.3 Uni Gem-port Olt-side Previous Interval Status Command . 72.4 Uni Gem-port Ont-side Current Interval Status Command . 72.5 Uni Gem-port Ont-side Previous Interval Status Command
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
73- CES Show Commands
.2078 .2079 .2081 .2083 .2085
2087
73.1 CES Show Command Tree . . . . . . . . . . . . . . . 73.2 CES Service Operational Information . . . . . . . . . . 73.3 CESPW Service Current Interval Statistics Command . 73.4 CESPW Service Previous Interval Statistics Command 73.5 Current Interval OLT side PM status Command . . . . . 73.6 Previous Interval OLT side PM status Command . . . . 73.7 Current Interval ONT side PM status Command . . . . 73.8 Previous Interval ONT side PM status Command . . . . 73.9 CESUNI Current Interval PM status Command . . . . . 73.10 CESUNI Previous Interval PM status Command . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
74- ANI ONT Show Commands
.2088 .2089 .2091 .2093 .2095 .2097 .2099 .2101 .2103 .2105
2107
74.1 ANI ONT Show Command Tree . . . . . . . 74.2 ANI ONT Operational-Data Status Command 74.3 ANI ONT Video Status Command . . . . . . 74.4 ANI ONT Video Stats Command . . . . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
75- L2UNI Show Commands
.2108 .2109 .2111 .2114
2116
75.1 L2UNI Show Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2117 75.2 Current L2UNI ONT Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2118 75.3 Previous L2UNI ONT Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .2121
76- Voice Ont IP Host Show Commands
2123
76.1 Voice Ont IP Host Show Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . .2124 76.2 ONT IP Host Operational Data Status Command . . . . . . . . . . . . . . . . . . . . . . .2125 76.3 ONT IP Host Current 15min Statistics Status Command . . . . . . . . . . . . . . . . . . .2128
77- Interface Status Commands 77.1 Interface Status Command Tree . . . 77.2 Interface Alarm Status Command . . 77.3 Physical Interface Status Command . 77.4 Interface Status Command . . . . . . 77.5 Interface Test Status Command . . . 77.6 Interface Stack Status Command . . 77.7 Interface Extensive Status Command
2130 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
78- SNTP Status Commands
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
.2131 .2132 .2134 .2135 .2143 .2148 .2155
2157
78.1 SNTP Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2158 78.2 SNTP Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2159
79- SNTP Server Commands
2160
79.1 SNTP Server Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2161 79.2 SNTP Server Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2162
3HH-08079-DDAA-TCZZA 01
Released
xix
Contents
80- System Status Commands
2163
80.1 System Status Command Tree . . . . . . . . . . 80.2 System Statistics Command . . . . . . . . . . . . 80.3 System Licenses Status Command . . . . . . . . 80.4 System Clock Status Command . . . . . . . . . . 80.5 Show syslog parameters . . . . . . . . . . . . . . 80.6 System Memory Usage Status Command . . . . . 80.7 System CPU Load Status Command . . . . . . . 80.8 System CDE Command . . . . . . . . . . . . . . 80.9 System Clock Management Status Command . . 80.10 System T4 Clock Management Status Command
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
81- Transaction Status Commands
.2164 .2165 .2166 .2169 .2171 .2172 .2174 .2176 .2177 .2180
2183
81.1 Transaction Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2184 81.2 Transaction Log Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2185 81.3 Transaction Log Entry Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . .2187
82- Error Status Command
2188
82.1 Error Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2189 82.2 Error Log Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2190
83- Software Status Commands 83.1 Software Status Command Tree . . . . . . . 83.2 Database Status Command . . . . . . . . . 83.3 Disk Status Command . . . . . . . . . . . . 83.4 Overall Software Package Status Command 83.5 Software Package Status Command . . . . 83.6 File Status Command . . . . . . . . . . . . . 83.7 Upload/Download Status Command . . . . . 83.8 Software Version For ANSI Status Command 83.9 Software Version For ETSI Status Command
2192 . . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
84- CDE Status Commands
.2193 .2194 .2196 .2198 .2201 .2203 .2205 .2208 .2209
2210
84.1 CDE Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2211 84.2 CDE download Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2212
85- IGMP Status Commands 85.1 IGMP Status Command Tree . . . . . . . . . . 85.2 IGMP System Status Command . . . . . . . . . 85.3 IGMP Channel Sources Status Command . . . 85.4 IGMP Channel Miscellaneous Status Command 85.5 IGMP Channel Protocol Status Command . . . 85.6 IGMP package to multicast source Command . 85.7 IGMP Group to Package Status Command . . . 85.8 Show Multicast Source Statistics Command . . 85.9 Show Multicast Channel Statistics Command . . 85.10 IGMP Module Counter Status Command . . . 85.11 IGMP Module Time Status Command . . . . . 85.12 IGMP Module Miscellaneous Status Command 85.13 IGMP System Status Command . . . . . . . .
2214 . . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
86- Transport Status Commands
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
. . . . . . . . . . . . .
.2215 .2216 .2218 .2221 .2224 .2227 .2228 .2229 .2231 .2233 .2236 .2238 .2240
2241
86.1 Transport Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2242 86.2 SNMP Protocol Statistics Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2243
xx
Released
3HH-08079-DDAA-TCZZA
01
Contents
86.3 SNMP Engine Status Command . . 86.4 System Status Command . . . . . 86.5 SFP status commands . . . . . . . 86.6 Interface MAU Status Command . . 86.7 Ethernet Lt Dot3 Status Command
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
87.1 Efm Oam Status Command Tree . . . . . . . 87.2 Efm Oam Mac Statistics Command . . . . . . 87.3 Efm Oam Pme Statistics Command . . . . . . 87.4 Efm Oam Local Information Status Command 87.5 Efm Oam Peer Information Status Command . 87.6 Efm Oam statistics Status Command . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
87- Efm Oam Status Commands
.2246 .2247 .2248 .2250 .2254
2256
88- DHCP Relay Status Commands
.2257 .2258 .2261 .2263 .2265 .2267
2269
88.1 DHCP Relay Status Command Tree . . . . . . . . . . . . . . . 88.2 DHCP Relay Port Statistics . . . . . . . . . . . . . . . . . . . . 88.3 DHCP Relay Port Statistics Related To Vlan Ports . . . . . . . 88.4 DHCP Relay Port Summary Statistics Related To Vlan Ports . 88.5 DHCP Relay Port Detailed Statistics Related To Vlan Ports . . 88.6 DHCP v6 Relay Port Statistics . . . . . . . . . . . . . . . . . . 88.7 DHCP v6 Relay Port Statistics Related To Vlan Ports . . . . . 88.8 DHCP v6 Relay Port Summary Statistics Related To Vlan Ports 88.9 DHCP v6 Relay Port Detailed Statistics Related To Vlan Ports 88.10 DHCP Relay Session Status Command . . . . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
89- Multicast Status Commands
.2270 .2271 .2273 .2275 .2277 .2284 .2286 .2288 .2290 .2294
2298
89.1 Multicast Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2299 89.2 Multicast Active Groups Status Command . . . . . . . . . . . . . . . . . . . . . . . . . .2300 89.3 Multicast Group Membership Status Command . . . . . . . . . . . . . . . . . . . . . . . .2303
90- CPE Management Status Commands
2306
90.1 CPE Management Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . .2307 90.2 CPE Management Show Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2308
91- Session Status Commands
2309
91.1 Session Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2310 91.2 Session Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2311
92- PPPoX-Relay Status Commands 92.1 PPPoX-Relay Status Command Tree . . . . . . . 92.2 PPPoX CC Engine Statistics . . . . . . . . . . . . 92.3 PPPoX CC Client Port Statistics . . . . . . . . . . 92.4 PPPoX CC Engine Monitor Statistics . . . . . . . 92.5 PPPoX CC Client Port Monitor Statistics . . . . . 92.6 PPPoX CC Session Engine Status Command . . 92.7 PPPoX CC Session Client Port Status Command
2313 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
93.1 SHDSL Status Command Tree . . . . . . . . . . . . . . . . 93.2 SHDSL Inventory Status Command . . . . . . . . . . . . . . 93.3 SHDSL Span Status Command . . . . . . . . . . . . . . . . 93.4 SHDSL Unit Status Command . . . . . . . . . . . . . . . . . 93.5 SHDSL Segment Status Command . . . . . . . . . . . . . . 93.6 SHDSL Segment Counters Current Interval Status Command
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
93- SHDSL Status Commands
3HH-08079-DDAA-TCZZA 01
.2314 .2315 .2317 .2320 .2322 .2325 .2328
2331
Released
.2332 .2334 .2336 .2343 .2345 .2350
xxi
Contents
93.7 SHDSL Segment Counters Current Day Status Command . . . . . . . 93.8 SHDSL Segment Counters Previous Interval Status Command . . . . 93.9 SHDSL Segment Counters Previous Day Status Command . . . . . . 93.10 SHDSL Span Current Interval Performance Data Status Command . 93.11 SHDSL Span Current Day Performance Data Status Command . . . 93.12 SHDSL Span Previous Interval Performance Data Status Command 93.13 SHDSL Span Previous Day Performance Data Status Command . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
94- IMA Status Commands
2370
94.1 IMA Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . 94.2 IMA Group Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . 94.3 IMA Group Near-End Current Interval Performance Data Status Command 94.4 IMA Group Near-End Previous Interval Performance Data Status Command 94.5 IMA Group Far-End Current Interval Performance Data Status Command . 94.6 IMA Group Far-End Previous Interval Performance Data Status Command . 94.7 IMA Link Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . 94.8 IMA Link Near-End Current Interval Performance Data Status Command . . 94.9 IMA Link Near-End Previous Interval Performance Data Status Command . 94.10 IMA Link Far-End Current Interval Performance Data Status Command . . 94.11 IMA Link Far-End Previous Interval Performance Data Status Command .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . .
95- Voice Status Commands
Released
.2371 .2372 .2377 .2379 .2381 .2383 .2385 .2389 .2391 .2393 .2395
2397
95.1 Voice Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . 95.2 Voice Sip Server Status Commands . . . . . . . . . . . . . . . . . . . 95.3 Voice Sip User Agent Access Point Show Commands . . . . . . . . . 95.4 Voice Sip Statistics System Status Command . . . . . . . . . . . . . 95.5 Voice Sip Statistics Perfinfo Status Command . . . . . . . . . . . . . 95.6 Voice Sip Termination Statistics Command for Current 15 Minutes . . 95.7 Voice Sip Termination Statistics Command for Current Day . . . . . . 95.8 Voice Sip Termination Statistics Command for Previous 15 Minutes . 95.9 Voice Sip Termination Statistics Command for Previous day . . . . . . 95.10 Voice Sip Call Statistics Command . . . . . . . . . . . . . . . . . . . 95.11 Voice Sip restoration: Redundancy Status Commands . . . . . . . . 95.12 Voice Sip Redundancy Status Commands . . . . . . . . . . . . . . . 95.13 Voice Sip Termination Status Commands . . . . . . . . . . . . . . . 95.14 Voice Megaco Equipment Board Status Commands . . . . . . . . . 95.15 Voice Megaco Equipment Status Commands . . . . . . . . . . . . . 95.16 Voice Megaco MGI Status Commands . . . . . . . . . . . . . . . . . 95.17 Voice Megaco Database Status Commands . . . . . . . . . . . . . . 95.18 Voice Megaco IP Status Commands . . . . . . . . . . . . . . . . . . 95.19 Voice Megaco SGI Status Commands . . . . . . . . . . . . . . . . . 95.20 Summary of Current Operational Parameters for ONT VoIP . . . . . 95.21 Summary of Call History Operational Parameters . . . . . . . . . . . 95.22 Voice ONT POTS MLT Test Status Command . . . . . . . . . . . . 95.23 Voice ONT POTS PB Dialtone Test Status Command . . . . . . . . 95.24 Voice ONT POTS SIP Dialtone Test Status Command . . . . . . . . 95.25 Summary of Actual Operational data for ONT VoIP Config Command 95.26 Voice ONT POTS Hook State Command . . . . . . . . . . . . . . . 95.27 Voice TC Olt-side Current Interval Status Command . . . . . . . . . 95.28 Voice TC Olt-side Previous Interval Status Command . . . . . . . . 95.29 Voice TC Ont-side Current Interval Status Command . . . . . . . . . 95.30 Voice TC Ont-side Previous Interval Status Command . . . . . . . . 95.31 GPON Voip Configuration Status Command . . . . . . . . . . . . . . 95.32 Voice GPON POTS RTP Current Statistics Command . . . . . . . . 95.33 Current Interval PM stats of ONT MGC Agent Command . . . . . . . 95.34 Voice Gpon POTS Call Statistics Command for Current 15 Minutes . 95.35 GPON Ont Sip Status Command . . . . . . . . . . . . . . . . . . . . 95.36 Voice Gpon SIP Agent Statistics Command for Current 15 Minutes . 95.37 Voice Gpon SIP Call Statistics Command for Current 15 Minutes . .
xxii
.2353 .2356 .2359 .2362 .2364 .2366 .2368
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3HH-08079-DDAA-TCZZA
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.2398 .2401 .2402 .2404 .2405 .2407 .2409 .2411 .2413 .2415 .2417 .2419 .2420 .2422 .2424 .2427 .2429 .2430 .2431 .2433 .2435 .2438 .2442 .2444 .2446 .2450 .2452 .2454 .2456 .2458 .2460 .2463 .2465 .2467 .2469 .2471 .2474
01
Contents
96- L2CP Status Commands 96.1 L2CP Status Command Tree . . . 96.2 L2CP Status Command . . . . . 96.3 L2CP Status Command . . . . . 96.4 L2CP Status Command . . . . . 96.5 L2CP Partition Status Command .
2476 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
97- Ethernet Lt Configuration Data Status Commands 97.1 Ethernet Lt Configuration Data Status Command Tree . 97.2 Ethernet Port Interface Configuration Status Command 97.3 Ethernet IGMP Configuration Status Command . . . . . 97.4 Ethernet Security PAE Configuration Status Command 97.5 Ethernet BridgePort Configuration Status Command . . 97.6 Ethernet QoS Configuration Status Command . . . . .
. . . . . .
. . . . . .
. . . . . .
2484 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
98- Ethernet Status Commands
.2485 .2486 .2488 .2491 .2494 .2498
2500
98.1 Ethernet Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . 98.2 Ethernet Counters Near End Line Current 15 Min . . . . . . . . . . . . . . . . . 98.3 Ethernet Counters Near End Line Current Day . . . . . . . . . . . . . . . . . . . 98.4 Ethernet Counters Near End Line Previous 15 Min . . . . . . . . . . . . . . . . . 98.5 Ethernet Counters Near End Line Previous Day . . . . . . . . . . . . . . . . . . 98.6 Ethernet PM Interval Per Interface Status Command . . . . . . . . . . . . . . . . 98.7 Ethernet Statistics Line Status Command . . . . . . . . . . . . . . . . . . . . . . 98.8 Ethernet Ont Port Operational Status Command . . . . . . . . . . . . . . . . . . 98.9 ONT Ethernet Port Performance Monitoring Current-Interval Status Command . . 98.10 ONT Ethernet Port Performance Monitoring Previous-Interval Status Command
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
99- Ethernet Lt Operational Data Status Commands 99.1 Ethernet Lt Operational Data Status Command Tree . 99.2 Ethernet Port Operational Status Command . . . . . 99.3 Ethernet BridgePort Operational Status Command . . 99.4 Ethernet Port Interface Operational Status Command 99.5 Ethernet IGMP Operational Status Command . . . . 99.6 Ethernet Port Ip Bridge Operational Status Command 99.7 Ethernet QoS Opertaional Status Command . . . . .
.2477 .2478 .2480 .2482 .2483
. . . . . . .
. . . . . . .
.2501 .2502 .2504 .2506 .2508 .2510 .2512 .2515 .2517 .2519
2521 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
100- Debug Status Commands
.2522 .2523 .2525 .2527 .2529 .2532 .2534
2536
100.1 Debug Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2537 100.2 SW Error Log Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2538
101- Trouble-Shooting Status Commands
2539
101.1 Trouble-Shooting Status Command Tree . . . . . . . . . . . . . . . . . 101.2 Trouble-shooting Statistics To One Port . . . . . . . . . . . . . . . . . . 101.3 Trouble-shooting Statistics on a Port (DSL or Ethernet) or PVC Interface 101.4 Trouble-shooting Statistics To One VlanPort . . . . . . . . . . . . . . . 101.5 Summary Trouble-shooting Statistics To Vlan Ports . . . . . . . . . . . . 101.6 Extensive Trouble-shooting Statistics To Vlan Ports . . . . . . . . . . . 101.7 Extensive Trouble-shooting ipv4-antispoofing Statistics To One UNI Port
. . . . . . .
102- Trouble-Shooting Pon Status Commands
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
.2540 .2541 .2543 .2545 .2547 .2550 .2554
2556
102.1 Trouble-Shooting Pon Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . .2557 102.2 Trouble-shooting Statistics over Pon Port . . . . . . . . . . . . . . . . . . . . . . . . . .2558
3HH-08079-DDAA-TCZZA 01
Released
xxiii
Contents
103- CFM Status Commands
2560
103.1 CFM Status Command Tree . . . . . . . . . . . . . . . . . . 103.2 Maintenance Domain on NT Status Command . . . . . . . . 103.3 Maintenance Association on NT Status Command . . . . . . 103.4 Maintenance Association End Point on NT Status Command 103.5 CFM Stack on NT Status Command . . . . . . . . . . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
104- IPoA/E IW Status Commands
.2561 .2562 .2564 .2566 .2568
2570
104.1 IPoA/E IW Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2571 104.2 IPoA/E IW Interworking Port Status Command . . . . . . . . . . . . . . . . . . . . . . .2572
105- LineTest Status Commands
2574
105.1 LineTest Status Command Tree . . . . . . . . . . . . 105.2 Megaco LineTest Available Session Status Command 105.3 Megaco LineTest Session Status Command . . . . . 105.4 Megaco LineTest Line Status Command . . . . . . . . 105.5 Megaco LineTest LineId ExtReport Status Command . 105.6 SINGLE LineTest Available Session Status Command 105.7 SINGLE LineTest Session Status Command . . . . . 105.8 SINGLE LineTest Line Status Command . . . . . . . 105.9 SINGLE LineTest LineId ExtReport Status Command
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
106- LACP status commands 106.1 LACP status commands Tree . . . . . 106.2 LACP Port Status Command . . . . . 106.3 LACP Group Status Command . . . . 106.4 LACP Member Port Status Command
2601 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
107- MSTP Status Commands 107.1 MSTP Status Command Tree . . . . 107.2 MSTP Bridge Status Command . . . 107.3 MSTP Instance Status Command . . 107.4 MSTP Network Port Status Command 107.5 MSTP Port Instance Status Command
.2575 .2576 .2577 .2579 .2583 .2588 .2589 .2592 .2596
.2602 .2603 .2609 .2611
2613 . . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
. . . . .
108- IPv6 Users Status Commands
.2614 .2615 .2617 .2619 .2622
2625
108.1 IPv6 Users Status Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2626 108.2 IPv6 Users Status Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2627
109- Security Status Commands
2630
109.1 Security Status Command Tree . . . . . . . . . . . . . . . 109.2 Operator Information Status Command . . . . . . . . . . . 109.3 Domain Status Command . . . . . . . . . . . . . . . . . . . 109.4 User Sessions Status Command . . . . . . . . . . . . . . . 109.5 Connection Profile Status Command . . . . . . . . . . . . . 109.6 RADIUS Authentication Server Status Command . . . . . . 109.7 RADIUS Authentication Server Statistics Command . . . . 109.8 RADIUS Accounting Server Statistics Command . . . . . . 109.9 RADIUS Accounting Server Status Command . . . . . . . . 109.10 RADIUS Dynamic Authentication Client Status Command 109.11 RADIUS Next Available Index Command . . . . . . . . . . 109.12 RADIUS Client Status Command . . . . . . . . . . . . . . 109.13 PAE Authenticator Status Command . . . . . . . . . . . . 109.14 EAPOL Statistics Command . . . . . . . . . . . . . . . . .
xxiv
Released
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
3HH-08079-DDAA-TCZZA
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . .
.2631 .2633 .2635 .2636 .2641 .2642 .2644 .2647 .2650 .2651 .2653 .2654 .2655 .2658
01
Contents
109.15 Diagnostic Information Status Command . . . . 109.16 Session Statistics Command . . . . . . . . . . 109.17 PAE Port System Status Command . . . . . . . 109.18 MAC Address related EAPOL Status Command 109.19 SSH Server Status Command . . . . . . . . . . 109.20 PM File Upload Status Command . . . . . . . . 109.21 PM File Upload Status Command . . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
110- Alarm Management Commands
.2661 .2666 .2669 .2671 .2673 .2674 .2675
2677
110.1 Alarm Management Command Tree . . . . . . . . . . . . . . . 110.2 Alarm Management Command . . . . . . . . . . . . . . . . . . 110.3 Snapshot Management Command . . . . . . . . . . . . . . . . 110.4 Alarm Delta Log Management Command . . . . . . . . . . . . 110.5 Log Management Command . . . . . . . . . . . . . . . . . . . 110.6 Alarm Filetransfer Manual Clearance Management Command . 110.7 Alarm Failed Login Manual Clearance Management Command
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
111- ATM Management Commands
.2678 .2679 .2680 .2681 .2682 .2683 .2684
2685
111.1 ATM Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2686 111.2 ATM Port Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2687
112- IGMP Management Commands
2689
112.1 IGMP Management Command Tree . . . . . . . 112.2 IGMP Management Command . . . . . . . . . . 112.3 IGMP Multicast Sources Management Command 112.4 IGMP Multicast Channel Management Command 112.5 IGMP Multicast Channel Management Command 112.6 IGMP Slot Management Command . . . . . . . 112.7 IGMP Channel Management Command . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
113- PPPoX Management Commands
.2690 .2691 .2692 .2693 .2694 .2696 .2697
2699
113.1 PPPoX Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2700 113.2 PPPoX Engine Port Management Command . . . . . . . . . . . . . . . . . . . . . . . .2701
114- PPPoEL2 Statistics Management Commands
2702
114.1 PPPoEL2 Statistics Management Command Tree . . . . . . . . . . . . . . . . . . . . .2703 114.2 PPPoEL2 Statistics Management Command . . . . . . . . . . . . . . . . . . . . . . . .2704
115- xDSL Management Commands
2706
115.1 xDSL Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2707 115.2 xDSL Line Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2708
116- Gpon xDSL Management Commands
2710
116.1 Gpon xDSL Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . .2711 116.2 Gpon xDSL Line Management Command . . . . . . . . . . . . . . . . . . . . . . . . . .2712
117- Software Management Commands 117.1 Software Management Command Tree . 117.2 Software Management Command . . . . 117.3 OSWP Software Management Command 117.4 Database Management Command . . . . 117.5 File Management Command . . . . . . . 117.6 Ihub Software Management Command . 117.7 IHUB Database Management Command
3HH-08079-DDAA-TCZZA 01
2714 . . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
Released
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
. . . . . . .
.2715 .2716 .2717 .2719 .2721 .2722 .2723
xxv
Contents
117.8 CDE Management Command
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2724
118- SHDSL Management Commands
2725
118.1 SHDSL Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2726 118.2 SHDSL Segment Configuration Command . . . . . . . . . . . . . . . . . . . . . . . . .2727
119- Session Management Commands
2729
119.1 Session Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2730 119.2 Forced Disconnect Session Command . . . . . . . . . . . . . . . . . . . . . . . . . . . .2731
120- System Management Commands
2732
120.1 System Management Command Tree . . . . . . . 120.2 SYSLOG Management command . . . . . . . . . 120.3 Secure Shell Server Key Regeneration Command 120.4 PM File Upload Management Command . . . . . . 120.5 PM File Upload Management Command . . . . . . 120.6 CPU Load Management Command . . . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
121- UDP debug Management Commands
.2733 .2734 .2735 .2736 .2737 .2738
2740
121.1 UDP debug Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . .2741 121.2 Forced Disconnect UDP debug Command . . . . . . . . . . . . . . . . . . . . . . . . . .2742
122- Trouble-Shooting Management Commands
2743
122.1 Trouble-Shooting Management Command Tree . . . . . . . . . . . . . . . . . . . . . . .2744 122.2 Trouble-shooting Interface Management Commands . . . . . . . . . . . . . . . . . . . .2745
123- Trouble-Shooting Management Commands
2747
123.1 Trouble-Shooting Management Command Tree . . . . . . . . . . . . . . . . . . . . . . .2748 123.2 Trouble-shooting Pon Interface Management Commands . . . . . . . . . . . . . . . . .2749
124- Voice Ont Management Commands
2750
124.1 Voice Ont Management Command Tree . . . . . . . . . . . . 124.2 Voice Megaco Database Management Command . . . . . . . 124.3 Voice Megaco Termination Lock Management Command . . 124.4 Voice Megaco Media Gateway Lock Management Command 124.5 Voice POTS Diagostics Management Command . . . . . . . 124.6 Voice POTS Pull-Break Management Command . . . . . . . 124.7 Voice SIP Pull-Break Management Command . . . . . . . . . 124.8 GPON Voip Configuration Management Command . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . .
125- Voice Management Commands
.2751 .2752 .2753 .2755 .2756 .2758 .2760 .2762
2764
125.1 Voice Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2765
126- MSTP Management Commands
2766
126.1 MSTP Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2767 126.2 MSTP Port Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2768
127- Pon Management Commands 127.1 Pon Management Command Tree . . . 127.2 Pon Bit Error Statistics Commands . . . 127.3 PON Rogue Test Diagnostic Command 127.4 Pon Protection Configuration Command
xxvi
Released
2769 . . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
. . . .
3HH-08079-DDAA-TCZZA
. . . .
. . . .
. . . .
. . . .
. . . .
.2770 .2771 .2772 .2773
01
Contents
128- CESUNI Management Commands
2774
128.1 CESUNI Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . .2775 128.2 CESUNI Loopback Management Command . . . . . . . . . . . . . . . . . . . . . . . . .2776
129- Equipment Management Commands
2778
129.1 Equipment Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . .2779 129.2 Equipment Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2780 129.3 Slot Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2781
130- ONT Management Command 130.1 ONT Management Command Tree . . . . . . . 130.2 ONT Interface Management Command . . . . 130.3 ONT Card Management Command . . . . . . 130.4 ONT Software Control Management Command 130.5 ONT Software Version Management Command 130.6 ONT Data Store Management Command . . .
2783 . . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
131- Bridge Management Commands
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
. . . . . .
.2784 .2785 .2786 .2787 .2788 .2789
2790
131.1 Bridge Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2791 131.2 Learned Unicast MAC Address Management Command . . . . . . . . . . . . . . . . . .2792 131.3 VLAN Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2794
132- Trap Management Commands
2795
132.1 Trap Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2796 132.2 Trap Manager Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . .2797
133- DHCP Management Command
2798
133.1 DHCP Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2799 133.2 DHCP Relay User Port Management Command . . . . . . . . . . . . . . . . . . . . . .2800 133.3 DHCP Relay User Port Management Command . . . . . . . . . . . . . . . . . . . . . .2802
134- ARP-RELAY statistics Management Commands
2804
134.1 ARP-RELAY statistics Management Command Tree . . . . . . . . . . . . . . . . . . . .2805 134.2 Arp-relay statistics Management Command . . . . . . . . . . . . . . . . . . . . . . . . .2806
135- Transport Management Commands
2808
135.1 Transport Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . .2809 135.2 IP Net-to-media Management Command . . . . . . . . . . . . . . . . . . . . . . . . . .2810
136- SNTP Management Commands
2811
136.1 SNTP Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2812 136.2 SNTP Management Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2813
137- Transactions Management Commands
2814
137.1 Transactions Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . .2815 137.2 Transaction Configuration Management Command . . . . . . . . . . . . . . . . . . . . .2816
138- Security Management Commands
2817
138.1 Security Management Command Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . .2818 138.2 Security 802.1x Port Authentication Management Command . . . . . . . . . . . . . . . .2819
3HH-08079-DDAA-TCZZA 01
Released
xxvii
Contents
139- Debug commands
2821
139.1 Debug commands Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2822 139.2 Debug commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2823
140- IHUB Commands
2824
141- Global And Environmental Commands 141.1 History Command . . . . . . 141.2 Echo Command . . . . . . . 141.3 Telnet Command . . . . . . 141.4 Exec Command . . . . . . . 141.5 Sleep Command . . . . . . . 141.6 Tree Command . . . . . . . 141.7 Write Command . . . . . . . 141.8 Logout Command . . . . . . 141.9 Help Command . . . . . . . 141.10 Info Command . . . . . . . 141.11 Exit Command . . . . . . . 141.12 Back Command . . . . . . 141.13 Delete Command . . . . . 141.14 In Command . . . . . . . . 141.15 Configure Command . . . . 141.16 Action Command . . . . . . 141.17 Show Command . . . . . . 141.18 Recursive Show Command 141.19 Sample Command . . . . . 141.20 Poll Command . . . . . . . 141.21 Debug Command . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
2827 . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
142- CLI Filters
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
.2828 .2829 .2830 .2831 .2833 .2834 .2835 .2836 .2837 .2838 .2841 .2842 .2843 .2844 .2845 .2847 .2848 .2849 .2850 .2851 .2852
2853
142.1 Count Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2854 142.2 Match Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2855 142.3 Tee Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2856
143- CLI Printers
2857
143.1 More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2858 143.2 No-More . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2859 143.3 Discard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2860
Index
xxviii
2861
Released
3HH-08079-DDAA-TCZZA
01
1- ISAM CLI
1.1 History 1.2 Preface 1.3 CLI Commands 1.4 Nodes 1.5 Parameters 1.6 Filters 1.7 Printers 1.8 Getting help 1.9 The CLI Prompt 1.10 Entering CLI Commands 1.11 CLI Backward Compatibility 1.12 Phase Out Strategy Obsolete Commands and/or Parameters 1.13 Command Phase Out Annoucement Release 1.14 Non supported commands/parameters
3HH-08079-DDAA-TCZZA 01
1-2 1-37 1-38 1-40 1-41 1-44 1-45 1-46 1-47 1-48 1-49 1-51 1-52 1-53
Released
1
1 ISAM CLI
1.1 History This history section enumerates the CLI commands which are new, modified or removed between any two subsequent releases. No details are provided within this section. The command description, syntax and parameters for each new and modified command is in the Command Syntax section of the respective command in the CLI Command Guide.
Command delta R4.3 versus R4.2.30 Modified Commands configure alarm entry (NTP and multiple xNTP servers support ,NRCD- B SW Auto-upgrade during migration/upgradwe) configure alarm entry (Login logout and target deletion traps,Enable OTDR on GPON LT, 48p vectoring VDSL2 LT ) configure igmp channel(CLI Commands implementation for IGMP CAC) configure igmp system (Context drop: Drop non-IGMPv3 packets) configure l2cp session (ANCP - set Partition ID field) configure linetest cluster ltparm ( Config external CDE parameter and Encrypt SIP regist) configure linetest cluster tsession ( Config external CDE parameter and Encrypt SIP regist) configure linetest single ltparm( Config external CDE parameter and Encrypt SIP regist) configure linetest single ltsession ( Config external CDE parameter and Encrypt SIP regist) configure mcast chn src-ip-addr(CLI Commands implementation for IGMP CAC) configure qos interface (Ctrl-Pkt-Policer for protocol PPPoX not PPPoE,GPON UNI scheduling/shaping based on queue parameters) configure qos interface queue (Ctrl-Pkt-Policer for protocol PPPoX not PPPoE,GPON UNI scheduling/shaping based on queue parameters) configure qos interface upstream-queue( ONT upstream policing and queue config) configure qos profiles ingress-qos(GPON LT color-aware trTCM) configure qos profiles policer(GPON LT color-aware trTCM) configure qos profiles shaper (Ctrl-Pkt-Policer for protocol PPPoX not PPPoE,GPON UNI scheduling/shaping based on queue parameters) configure shdsl span (shdslSpanBondingRateControlMode check) configure system loop-id-syntax (Protocol-awareness for dual-tagged VLAN ports)
2
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
configure trap manager (login logout Trap management) configure trap definition (login logout Trap management) configure vlan id (Insert Line parameter for PPPOE and SW policer management ready , ARP anti-spoof) configure voice sip server ( SIP LC call Transfer) configure voice sip termination(R4.3V migration) configure voice sip user-agent (Enable line test when port is disabled/blocked/not, NTT: SIP: CLI Support for DHCP) configure voice sip system session-timer (R4.3V migration) configure voice sip user-agent-ap slot-id (Enable line test when port is disabled/blocked/not) configure voice sip vsp (Common Voice Software for ONT and ISAM-V) configure xdsl board (support for sink xdsl common code) configure xdsl line (support for sink xdsl common code ) show equipment diagnostics sfp(Retrievable SFP/SFP+/XFP Config data) show linetest cluster lineid-ext-rept(Config external CDE parameter and Encrypt SIP regist) show linetest single lineid-ext-rept( Config external CDE parameter and Encrypt SIP regist) show system license (Green DSL L2 Mode License Counter) configure equipment ont interface (IR Dual SIP Stack OLT) configure pon interface (IR Dual SIP Stack OLT) configure qos profiles scheduler-node (GPON: downstream UNI rate shaping to include multicast traffic) configure system (GPON: downstream UNI rate shaping to include multicast traffic) configure system sync-if-timing (GPON: downstream UNI rate shaping to include multicast traffic) configure system sync-if-timing ssm (GPON: downstream UNI rate shaping to include multicast traffic) configure voice ont pots (IR Dual SIP Stack OLT) admin alarm clear-alarm (minor bug fix) configure iphost ont (minor bug fix) configure linetest single ltsession (Common Voice Software for ONT) show config-data-port bridge-port(minor bug fix) show oper-data-port bridge-port(minor bug fix) show voice ont mgc-agent statistics current-15min (minor bug fix) show xdsl vect-disturbers (minor bug fix) configure voice ont mgc-config (minor bug fix)
3HH-08079-DDAA-TCZZA 01
Released
3
1 ISAM CLI
New Commands admin alarm clear-alarm ip-address session-id (login logout Trap management) admin system security pmfile ( R4.3V migration) admin system security pmfile upload ( R4.3V migration) admin voice cluster (ISAM-V) admin voice cluster database(ISAM-V) admin voice cluster equipment(ISAM-V) admin voice cluster media-gateway (ISAM-V) admin voice sip ( Common Voice Software for ONT and ISAM-V) configure igmp mcast-svc-context (CLI Commands implementation for IGMP CAC) configure pon interface otdr ( Enable OTDR on GPON LT ) configure qos ctrl-pkt-policer(Ctrl-Pkt-Policer for protocol PPPoX not PPPoE) configure qos profiles marker dot1p-remark (GPON LT color-aware trTCM) configure qos profiles marker dot1p-remark dot1p-value(GPON LT color-aware trTCM) configure system security pmfile ( R4.3V migration) configure system security pmfile upload ( R4.3V migration) configure voice cluster (ISAM-V) configure voice cluster equipment (ISAM-V) configure voice cluster media-gateway (ISAM-V) configure voice cluster signal-gateway (ISAM-V) configure voice cluster equipment board ( ISAM-V) configure voice cluster equipment termination (ISAM-V) configure voice cluster ip (ISAM-V) configure voice sip dhcp-authent-para ( Enable line test when port is disabled/blocked/not) configure voice sip dnsserver ( SIP LC call Transfer) configure voice sip transport ( Common Voice Software for ONT and ISAM-V) configure voice sip redundancy ( SIP LC call Transfer) configure voice sip redundancy-cmd ( SIP LC call Transfer) configure voice sip register ( Common Voice Software for ONT and ISAM-V) configure xdsl vce-profile (support for sink xdsl common code) configure xdsl vect-profile (support for sink xdsl common code) admin alarm clear-alarm filetransfer ip-address(minor bug fix)
4
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
admin alarm clear-alarm login-failure ip-address(minor bug fix) show igmp mcast-svc-context (CLI Commands implementation for IGMP CAC) show alarm current mgmt-sec-access ( login logout Trap management) show alarm current otdr (Enable OTDR on GPON LT ) show alarm current sip-dial-plan ( SIP LC call Transfer) show alarm current sip-server ( SIP LC call Transfer) show alarm current sip-vsp ( SIP LC call Transfer) show alarm current vect-line (48p vectoring VDSL2 LT) show alarm log mgmt-sec-access (login logout Trap management) show alarm log otdr ( Enable OTDR on GPON LT ) show alarm log sip-dial-plan ( SIP LC call Transfer) show alarm log sip-server ( SIP LC call Transfer) show alarm log sip-vsp ( SIP LC call Transfer) show alarm log vect-line (48p vectoring VDSL2 LT) show alarm snap-shot mgmt-sec-access ( login logout Trap management) show alarm snap-shot otdr (Enable OTDR on GPON LT ) show alarm snap-shot sip-dial-plan ( SIP LC call Transfer) show alarm snap-shot sip-server ( SIP LC call Transfer) show alarm snap-shot sip-vsp ( SIP LC call Transfer) show alarm snap-shot vect-line (48p vectoring VDSL2 LT) show equipment transceiver-inventory (Retrievable SFP/SFP+/XFP Config data ) show security pmfile ( R4.3V migration) show security pmfile upload ( R4.3V migration) show trouble-shooting statistics uni-interface (Protocol-awareness for dual-tagged VLAN ports) show voice cluster ( Common Voice Software for ONT and ISAM-V) show voice cluster board ( Common Voice Software for ONT and ISAM-V) show voice cluster database( Common Voice Software for ONT and ISAM-V) show voice cluster ip ( Common Voice Software for ONT and ISAM-V) show voice cluster media-gateway ( Common Voice Software for ONT and ISAM-V) show voice cluster signal-gateway( Common Voice Software for ONT and ISAM-V)
3HH-08079-DDAA-TCZZA 01
Released
5
1 ISAM CLI
show voice cluster termination ( Common Voice Software for ONT and ISAM-V) show voice sip redundancy-node ( SIP LC call Transfer) show voice sip redundancy-node redundancy-cmd ( SIP LC call Transfer) show voice sip redundancy-node redundancy-state ( SIP LC call Transfer) show xdsl vect-carrier-data (48p vectoring VDSL2 LT) show xdsl vect-carrier-data far-end disturber (48p vectoring VDSL2 LT) show xdsl vect-carrier-data near-end disturber (48p vectoring VDSL2 LT) show xdsl vect-disturbers (48p vectoring VDSL2 LT) configure system user-user-hairpin (ONT to ONT communication via OLT) configure system sntp server-table (IACM MIB, CLI drop for SNTP) configure system sntp server-table ip-address (IACM MIB, CLI drop for SNTP) configure system sync-if-timing ssmout-ltport (NRNT-A) configure system sync-if-timing ssmout-synce(NRNT-A) configure system sync-if-timing t4-out-config (NRNT-A) configure system time (IACM CLI, Alarm drop for NTP) configure xdsl vp-board vp-link (CLI implementation VP-LT mapping) show alarm current megaco-media-gw (In DN mode alarm for dns lookup failure) show alarm current megaco-plug-unit (In DN mode alarm for dns lookup failure) show alarm current megaco-sig-gw (In DN mode alarm for dns lookup failure) show alarm current megaco-sig-lt(In DN mode alarm for dns lookup failure) show alarm current megaco-term (In DN mode alarm for dns lookup failure) show alarm log megaco-media-gw (In DN mode alarm for dns lookup failure) show alarm log megaco-plug-unit (In DN mode alarm for dns lookup failure) show alarm log megaco-sig-gw (In DN mode alarm for dns lookup failure) show alarm log megaco-sig-lt (In DN mode alarm for dns lookup failure) show alarm log megaco-term (In DN mode alarm for dns lookup failure)
6
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show alarm snap-shot megaco-media-gw (In DN mode alarm for dns lookup failure) show alarm snap-shot megaco-plug-unit (In DN mode alarm for dns lookup failure) show alarm snap-shot megaco-sig-gw (In DN mode alarm for dns lookup failure) show alarm snap-shot megaco-sig-lt (In DN mode alarm for dns lookup failure) show alarm snap-shot megaco-term (In DN mode alarm for dns lookup failure) show sntp server-table server-ip-addr (IACM MIB, CLI drop for SNTP) show system ntp (IACM CLI, Alarm drop for NTP) show system sync-if-timing-t4 (CLI Commands for Full SSM and SSM-QL) show system user-user-hairpin (ONT to ONT communication via OLT) show voice ont pots hookstate (Dual SIP Stack OLT) Removed Commands configure system security domain ip-pool (remove XD mappers) configure system security domain user (remove XD mappers) configure voice sip termination local-loop (remove XD mappers) configure xdsl line local-loop (remove XD mappers) show alarm current llu-relay (remove XD mappers) show alarm current sip-user-agent (SIP LC call Transfer) show alarm log llu-relay (remove XD mappers) show alarm log sip-user-agent (SIP LC call Transfer) show alarm snap-shot llu-relay (remove XD mappers) show alarm snap-shot sip-user-agent (SIP LC call Transfer)
Command delta R4.2.30 versus R4.2.0.2 Modified Commands configure interface port (Logical Link ID support) show interface port (Logical Link ID support) configure vlan (4096 support for UVlanIndex) show vlan cross-connect (Logical Link ID support) show vlan bridge-port-fdb (Logical Link ID support) show vlan dup-mac-alarm (Logical Link ID support) admin bridge learned-unicast-mac (Logical Link ID support)
3HH-08079-DDAA-TCZZA 01
Released
7
1 ISAM CLI
configure bridge port (Logical Link ID support, 4096 vlan support) show vlan fdb-board (vlanport added) configure qos interface(Logical Link ID support) configure qos interface (index) upstream-queue (queue) configure qos profiles (type onetokentworate added) New Commands configure bridge port in-qos-prof-name configure bridge port max-up-qos-policy configure bridge port max-ip-antispoof configure system loop-id-syntax
Command delta R4.2.02 versus R4.2 Modified Commands configure igmp (Multicast channel selection by vlan-id) configure igmp system(Multicast channel selection by vlan-id) configure shdsl span(CTC support with SHDSL proxy) configure system syslog(DomLead Ral Transport (GPON)) show igmp grp-to-package(Multicast channel selection by vlan-id) show igmp module-mcast-channel(Multicast channel selection by vlan-id) configure linetest cluster ltparm(ISAM-V H248 CLI enhancement) configure linetest cluster ltsession(ISAM-V H248 CLI enhancement) configure linetest single ltparm(ISAM-V H248 CLI enhancement) configure linetest single ltsession(ISAM-V H248 CLI enhancement) show linetest cluster lineid-ext-rept(Config externalCDEparameter) show linetest single lineid-ext-rept(Config externalCDEparameter) configure cfm domain association(Jitter, Latency, RT performance report- CFM) configure cfm domain association mep(Jitter, Latency, RT performance report- CFM) show cfm stack(Jitter, Latency, RT performance report- CFM) configure equipment ont interface(OMCIv2) configure xdsl ont line(OMCIv2) configure equipment ont slot(OLT/OMCI/ONT support for TR-69) configure xdsl ont service (minor problem solving) show arp-relay-stats vlan(minor problem solving)
8
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
New Commands show ipv6 users(IPv6 on FD) configure mcast chn (Multicast channel selection by vlan-id) configure mcast monitor (Multicast channel selection by vlan-id) admin igmp mcast-chn(Multicast channel selection by vlan-id) show xdsl-bonding operational-data link(Transport B-Fast) configure xdsl ont dpbo-profile(MDU : VDSL enhancements) configure xdsl ont dpbo-profile micpsd-pt-down(MDU : VDSL enhancements) configure xdsl ont dpbo-profile epsd-pt-down(MDU : VDSL enhancements) configure xdsl ont interface dpbo-profile(MDU : VDSL enhancements) configure veip(OLT/OMCI/ONT support for TR-69) configure veip ont domain-name(OLT/OMCI/ONT support for TR-69) configure veip port pm-collect(OLT/OMCI/ONT support for TR-69) admin voice ont voip-config (OMCIv2) configure equipment ont interface fec-tc-layer (OMCIv2) configure iphost (OMCIv2) configure iphost ont (OMCIv2) configure iphost ont performance-monitor (OMCIv2) configure voice ont auth-sec-prof (OMCIv2) configure voice ont feat-acccode-prof (OMCIv2) configure voice ont mgc-config (OMCIv2) configure voice ont nwdial-plan-prof (OMCIv2) configure voice ont ring-seg-prof (OMCIv2) configure voice ont ring-seq-prof (OMCIv2) configure voice ont ringing-profile (OMCIv2) configure voice ont rtp-profile (OMCIv2) configure voice ont sec-uri-profile (OMCIv2) configure voice ont sip-config (OMCIv2) configure voice ont tone-event-prof (OMCIv2) configure voice ont tone-seg-profile (OMCIv2) configure voice ont tone-seq-profile (OMCIv2) configure voice ont uri-prof (OMCIv2) configure voice ont voice-serv-prof (OMCIv2) configure voice ont voice-sip-port (OMCIv2)
3HH-08079-DDAA-TCZZA 01
Released
9
1 ISAM CLI
configure voice ont voip-app-service (OMCIv2) configure voice ont voip-config (OMCIv2) configure voice ont voip-media-prof (OMCIv2) configure voice ont mgc-agent (OMCIv2) configure voice ont pots-call (OMCIv2) configure voice ont pots-rtp (OMCIv2) configure voice ont sip-agent (OMCIv2) configure voice ont sip-call (OMCIv2) configure voice ont tone-event-prof (OMCIv2) configure voice ont tone-event-prof busy-tone (OMCIv2) configure voice ont tone-event-prof callwait1-tone (OMCIv2) configure voice ont tone-event-prof callwait2-tone (OMCIv2) configure voice ont tone-event-prof callwait3-tone (OMCIv2) configure voice ont tone-event-prof callwait4-tone (OMCIv2) configure voice ont tone-event-prof confirm-tone (OMCIv2) configure voice ont tone-event-prof congest-tone (OMCIv2) configure voice ont tone-event-prof dead-tone (OMCIv2) configure voice ont tone-event-prof dial-tone (OMCIv2) configure voice ont tone-event-prof intrusion-tone (OMCIv2) configure voice ont tone-event-prof msg-wait-tone (OMCIv2) configure voice ont tone-event-prof release-tone (OMCIv2) configure voice ont tone-event-prof reorder-tone (OMCIv2) configure voice ont tone-event-prof ringback-tone (OMCIv2) configure voice ont tone-event-prof roh-tone (OMCIv2) configure voice ont tone-event-prof special-dial-tone (OMCIv2) configure voice ont tone-event-prof special-info-tone (OMCIv2) configure voice ont tone-event-prof stutter-tone (OMCIv2) configure voice ont tone-event-prof userdef1-tone (OMCIv2) configure voice ont tone-event-prof userdef2-tone (OMCIv2) configure voice ont tone-event-prof userdef3-tone (OMCIv2) configure voice ont tone-event-prof userdef4-tone (OMCIv2) configure voice ont voice-port custinfo (OMCIv2) show equipment ont fec-tc-layer (OMCIv2) show equipment ont fec-tc-layer ont-side (OMCIv2) show equipment ont fec-tc-layer ont-side current-interval (OMCIv2) show iphost (OMCIv2)
10
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show iphost ont (OMCIv2) show iphost ont operational-data (OMCIv2) show iphost ont statistics (OMCIv2) show iphost ont statistics current-15min (OMCIv2) show iphost ont statistics prev-15min (OMCIv2) show voice ont mgc-agent (OMCIv2) show voice ont mgc-agent statistics (OMCIv2) show voice ont mgc-agent statistics current-15min (OMCIv2) show voice ont mgc-agent statistics previous-15min (OMCIv2) show voice ont pots operational-data (OMCIv2) show voice ont pots-call (OMCIv2) show voice ont pots-call statistics (OMCIv2) show voice ont pots-call statistics current-15min (OMCIv2) show voice ont pots-call statistics prev-15min (OMCIv2) show voice ont pots-rtp (OMCIv2) show voice ont pots-rtp statistics (OMCIv2) show voice ont pots-rtp statistics current-15min (OMCIv2) show voice ont pots-rtp statistics prev-15min (OMCIv2) show voice ont sip-agent (OMCIv2) show voice ont sip-agent statistics (OMCIv2) show voice ont sip-agent statistics current-15min (OMCIv2) show voice ont sip-agent statistics prev-15min (OMCIv2) show voice ont sip-call (OMCIv2) show voice ont sip-call statistics (OMCIv2) show voice ont sip-call statistics current-15min (OMCIv2) show voice ont sip-call statistics prev-15min (OMCIv2) show voice ont sip-config (OMCIv2) show voice ont sip-config operational-data (OMCIv2) show voice ont voip-config (OMCIv2) show voice ont voip-config operational-data (OMCIv2)
Command delta R4.2 versus R4.0.10 Modified Commands admin equipment slot(NRNT-A; mini-ISAM NT) admin shdsl-seg unit-id(SHDSL evolution on NSLT-b) admin system cpu-load(NRNT-A; mini-ISAM NT) configure alarm entry(IPv6 on HC-L3 NT)
3HH-08079-DDAA-TCZZA 01
Released
11
1 ISAM CLI
configure debug-trace protocol-trace(IPv6 Protocol Aware CC with DHCPv6 on FD) configure equipment slot(NANT-E CLI/TL1 Adaptation) configure ethernet line(FD 36p Ethernet LT (NELT-B)) configure igmp channel(GPON support) configure interface port(FD 36p Ethernet LT (NELT-B)) configure qos profiles l2-filter(IPv6 Protocol Aware CC with DHCPv6 on FD) configure qos profiles policer(FD 36p Ethernet LT (NELT-B)) configure qos profiles queue(FD 36p Ethernet LT (NELT-B)) configure qos tc-map-dot1p(FD 36p Ethernet LT (NELT-B)) configure qos tca queue(GPON support) configure shdsl segment unit-id(SHDSL evolution on NSLT-b) configure shdsl span(SHDSL evolution on NSLT-b) configure shdsl unit unit-id(SHDSL evolution on NSLT-b) configure system max-lt-link-speed(NANT-E CLI/TL1 Adaptation) configure system security profile(Lawful Intercept) configure system security domain(Full CLI support) configure system security default-profile(Lawful Intercept) configure system security snmp group security-level(Lawful Intercept) configure system security snmp map-user-group(Lawful Intercept) configure system sync-if-timing(NRNT-A; mini-ISAM NT) configure system sync-if-timing ssm(minor problem solving) configure system sync-if-timing synce(NRNT-A; mini-ISAM NT) configure system syslog route msg-type(Lawful Intercept) configure trap manager(Reliable Trap management) configure trap definition(Reliable Trap management) configure vlan id(IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan port-protocol(IPv6 Protocol Aware CC with DHCPv6 on FD) configure voice sip termination(ISAM-V) configure voice sip lineid-syn-prof(ISAM-V) configure voice sip vsp(ISAM-V) configure xdsl overrule-data(standard ARQ for ADSL2(+)and VDSL2) configure xdsl service-profile(SRA for VDSL2) configure xdsl line(standard ARQ for ADSL2(+)and VDSL2) configure xdsl line tca-line-threshold(standard ARQ for
12
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
ADSL2(+)and VDSL2) configure xdsl-bonding group-profile(8p PTM VDSL2 bonding on FD) show equipment slot(NANT-E CLI/TL1 Adaptation) show equipment temperature(NRNT-A; mini-ISAM NT) show interface port(FD 36p Ethernet LT (NELT-B)) show interface stack(FD 36p Ethernet LT (NELT-B)) show interface test(FD 36p Ethernet LT (NELT-B)) show qos interface-bandwidth(GPON support) show qos statistics queue current-15min(GPON support) show qos statistics queue prev-15min(GPON support) show shdsl inventory(SHDSL evolution on NSLT-b) show shdsl segment-counters current-15min(SHDSL evolution on NSLT-b) show shdsl segment-counters current-1day(SHDSL evolution on NSLT-b) show shdsl segment-counters previous-15min(SHDSL evolution on NSLT-b) show shdsl segment-counters previous-1day(SHDSL evolution on NSLT-b) show shdsl segment-status(SHDSL evolution on NSLT-b) show shdsl unit-status(SHDSL evolution on NSLT-b) show system cpu-load(NRNT-A; mini-ISAM NT) show system license(NANT-E CLI/TL1 Adaptation) show system memory-usage(NRNT-A; mini-ISAM NT) show trouble-shooting statistics interface(PT Counters) show vlan residential-bridge extensive(FD 36p Ethernet LT (NELT-B)) show vlan residential-bridge summary(FD 36p Ethernet LT (NELT-B)) show voice sip statistics call(ISAM-V) New Commands admin ces(Full CLI support) admin ces ont(Full CLI support) admin ces ont line(Full CLI support) admin dhcp-relay v6-port-stats(IPv6 Protocol Aware CC with DHCPv6 on FD) admin equipment ont(Full CLI support) admin equipment ont data-store(Full CLI support) admin equipment ont interface(Full CLI support)
3HH-08079-DDAA-TCZZA 01
Released
13
1 ISAM CLI
admin equipment ont slot(Full CLI support) admin equipment ont sw-ctrl(Full CLI support) admin equipment ont sw-version(Full CLI support) admin ont-xdsl-line(Full CLI support) admin pon(Full CLI support) admin pon ber-stats(Full CLI support) admin voice(Full CLI support) admin voice ont(Full CLI support) admin voice ont pots(Full CLI support) admin voice ont pots diagnostics mode(Full CLI support) admin voice ont pots pb-dial-tone slow-pull-timer(Full CLI support) admin voice ont pots sip-dial-tone sip-phone-number(Full CLI support) configure ani(Full CLI support) configure ani ont(Full CLI support) configure ani ont tca-thresh(Full CLI support) configure ani ont video(Full CLI support) configure ces(Full CLI support) configure ces ont(Full CLI support) configure ces ont profile(Full CLI support) configure ces ont service service-nbr(Full CLI support) configure ces ont line mode(Full CLI support) configure ces ont line port pm-collect(Full CLI support) configure ces ont service service-nbr tc-layer(Full CLI support) configure ces ont service service-nbr pseudo-wire(Full CLI support) configure dhcp-relay v6-port-stats(IPv6 Protocol Aware CC with DHCPv6 on FD) configure equipment ont(Full CLI support) configure equipment ont interface(Full CLI support) configure equipment ont slot(Full CLI support) configure equipment ont sw-ctrl(Full CLI support) configure equipment ont interface tc-layer-threshold(Full CLI support) configure ethernet line mau(FD 36p Ethernet LT (NELT-B)) configure ethernet ont cust-info(Full CLI support) configure ethernet ont port pm-collect(Full CLI support) configure l2uni(Full CLI support) configure l2uni ont(Full CLI support)
14
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
configure l2uni ont performance-monitor(Full CLI support) configure l2uni ont tc-layer-threshold dropped-frames-up(Full CLI support) configure linetest(ISAM-V H248 : CLI enhancements) configure linetest cluster(ISAM-V H248 : CLI enhancements) configure linetest cluster ltline(ISAM-V H248 : CLI enhancements) configure linetest cluster ltparm(ISAM-V H248 : CLI enhancements) configure linetest cluster ltsession(ISAM-V H248 : CLI enhancements) configure linetest single(ISAM-V H248 : CLI enhancements) configure linetest single ltline lineid(ISAM-V H248 : CLI enhancements) configure linetest single ltparm tst-type(ISAM-V H248 : CLI enhancements) configure linetest single ltsession session-cmd(ISAM-V H248 : CLI enhancements) configure link-agg(FD 36p Ethernet LT (NELT-B)) configure link-agg general priority(FD 36p Ethernet LT (NELT-B)) configure link-agg group load-sharing-policy(FD 36p Ethernet LT (NELT-B)) configure link-agg group port(FD 36p Ethernet LT (NELT-B)) configure link-agg port passive-lacp(FD 36p Ethernet LT (NELT-B)) configure mcast static(FD 36p Ethernet LT (NELT-B)) configure mcast static branch(FD 36p Ethernet LT (NELT-B)) configure ntp(Full CLI support) configure ntp ont(Full CLI support) configure pon (Full CLI support) configure pon power-shed-prof(Full CLI support) configure pon interface label(Full CLI support) configure pon interface tc-layer pm-collect(Full CLI support) configure pon interface tc-layer-threshold(Full CLI support) configure system pon-ont slid-mode(Full CLI support) configure system security li separate(Full CLI support) configure uni(Full CLI support) configure uni ont(Full CLI support) configure uni ont tc-layer pm-collect(Full CLI support) configure uni ont video pwr-override(Full CLI support) configure voice ont(Full CLI support) configure voice ont service(Full CLI support)
3HH-08079-DDAA-TCZZA 01
Released
15
1 ISAM CLI
configure voice ont pots custinfo(Full CLI support) configure voice ont tc-layer pm-collect(Full CLI support) configure xdsl rtx-profile rtx-profile(Full CLI support) configure xdsl ont(Full CLI support) configure xdsl ont service-profile(Full CLI support) configure xdsl ont spectrum-profile(Full CLI support) configure xdsl ont line service-profile(Full CLI support) configure xdsl ont spectrum-profile vdsl vdsl-band-plan(Full CLI support) configure xdsl ont spectrum-profile vdsl2 max-agpowlev-down(Full CLI support) configure xstp(FD 36p Ethernet LT (NELT-B)) configure xstp instance(FD 36p Ethernet LT (NELT-B)) configure xstp general enable-stp(FD 36p Ethernet LT (NELT-B)) configure xstp instance associate-vlan(FD 36p Ethernet LT (NELT-B)) configure xstp port priority(FD 36p Ethernet LT (NELT-B)) configure xstp port-instance instance(FD 36p Ethernet LT (NELT-B)) mrinfo(PIM-SSM on HC-L3 NT) mstat(PIM-SSM on HC-L3 NT) mtrace(PIM-SSM on HC-L3 NT) show alarm current ihub-ipv6(IPv6 on HC-L3 NT) show alarm current pim(PIM-SSM on HC-L3 NT) show alarm current sip-user-agent(minor problem solving) show alarm log ihub-ipv6(IPv6 on HC-L3 NT) show alarm log pim(PIM-SSM on HC-L3 NT) show alarm log sip-user-agent(minor problem solving) show alarm snap-shot ihub-ipv6(IPv6 on HC-L3 NT) show alarm snap-shot pim(PIM-SSM on HC-L3 NT) show alarm snap-shot sip-user-agent(minor problem solving) show ani(Full CLI support) show ani ont(Full CLI support) show ani ont operational-data(Full CLI support) show ani ont video(Full CLI support) show ani ont video-stats(Full CLI support) show ces(Full CLI support) show ces ont(Full CLI support)
16
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show ces ont line(Full CLI support) show ces ont line port(Full CLI support) show ces ont line port current-interval(Full CLI support) show ces ont line port previous-interval interval-nbr(Full CLI support) show ces ont service(Full CLI support) show ces ont service operational-data(Full CLI support) show ces ont service pseudo-wire(Full CLI support) show ces ont service pseudo-wire current-interval(Full CLI support) show ces ont service pseudo-wire previous-interval interval-nbr(Full CLI support) show ces ont service tc-layer(Full CLI support) show ces ont service tc-layer olt-side(Full CLI support) show ces ont service tc-layer olt-side current-interval(Full CLI support) show ces ont service tc-layer olt-side previous-interval interval-nbr(Full CLI support) show ces ont service tc-layer ont-side(Full CLI support) show ces ont service tc-layer ont-side current-interval(Full CLI support) show ces ont service tc-layer ont-side previous-interval interval-nbr(Full CLI support) show dhcp-relay v6-port-stats(IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan(IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6extensive(IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6summary(IPv6 Protocol Aware CC with DHCPv6 on FD) show equipment ont(Full CLI support) show equipment ont data-store(Full CLI support) show equipment ont interface(Full CLI support) show equipment ont operational-data(Full CLI support) show equipment ont optics(Full CLI support) show equipment ont optics-history(Full CLI support) show equipment ont pwr-shed(Full CLI support) show equipment ont slot(Full CLI support) show equipment ont sw-ctrl(Full CLI support) show equipment ont sw-download(Full CLI support)
3HH-08079-DDAA-TCZZA 01
Released
17
1 ISAM CLI
show equipment ont sw-version(Full CLI support) show equipment ont tc-layer(Full CLI support) show equipment ont tc-layer olt-side(Full CLI support) show equipment ont tc-layer olt-side current-interval(Full CLI support) show equipment ont tc-layer olt-side previous-interval(Full CLI support) show equipment ont tc-layer olt-side-on-demand(Full CLI support) show equipment ont tc-layer olt-side-on-demand current-interval(Full CLI support) show equipment ont tc-layer olt-side-on-demand previous-interval(Full CLI support) show equipment ont tc-layer ont-side(Full CLI support) show equipment ont tc-layer ont-side current-interval(Full CLI support) show equipment ont tc-layer ont-side previous-interval interval-num(Full CLI support) show ethernet ont(Full CLI support) show ethernet ont operational-data(Full CLI support) show ethernet ont port(Full CLI support) show ethernet ont port current-interval(Full CLI support) show ethernet ont port previous-interval interval-num(Full CLI support) show ethernet statistics(FD 36p Ethernet LT (NELT-B)) show ethernet statistics line(FD 36p Ethernet LT (NELT-B)) show l2uni(Full CLI support) show l2uni ont(Full CLI support) show l2uni ont performance-data(Full CLI support) show l2uni ont performance-data current-interval(Full CLI support) show l2uni ont performance-data previous-interval interval-nbr(Full CLI support) show linetest(ISAM-V H248 : CLI enhancements) show linetest cluster(ISAM-V H248 : CLI enhancements) show linetest cluster avail-sess(ISAM-V H248 : CLI enhancements) show linetest cluster lineid-ext-rept lineid(ISAM-V H248 : CLI enhancements) show linetest cluster ltline lineid(ISAM-V H248 : CLI enhancements) show linetest cluster ltsession(ISAM-V H248 : CLI enhancements) show linetest single(ISAM-V H248 : CLI enhancements) show linetest single avail-sess(ISAM-V H248 : CLI enhancements)
18
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show linetest single lineid-ext-rept lineid(ISAM-V H248 : CLI enhancements) show linetest single ltline lineid(ISAM-V H248 : CLI enhancements) show linetest single ltsession(ISAM-V H248 : CLI enhancements) show link-agg(FD 36p Ethernet LT (NELT-B)) show link-agg group-info(FD 36p Ethernet LT (NELT-B)) show link-agg member-port port(FD 36p Ethernet LT (NELT-B)) show link-agg port-info(FD 36p Ethernet LT (NELT-B)) show pon(Full CLI support) show pon ber-stats ont-num(Full CLI support) show pon interface(Full CLI support) show pon interface tc-layer(Full CLI support) show pon interface tc-layer current-interval(Full CLI support) show pon interface tc-layer previous-interval interval-nbr(Full CLI support) show pon optics(Full CLI support) show pon sfp-inventory(Full CLI support) show pon sw-download(Full CLI support) show pppoel2-stats(Porting FTTU) show pppoel2-stats vlan(Porting FTTU) show pppoel2-stats vlan extensive(Porting FTTU) show pppoel2-stats vlan summary(Porting FTTU) show qos pcc-rules fwd-port(Full CLI support) show trouble-shooting pon(PT Counters) show trouble-shooting pon statistics(PT Counters) show trouble-shooting pon statistics interface(PT Counters) show uni(Full CLI support) show uni ont(Full CLI support) show uni ont tc-layer(Full CLI support) show uni ont tc-layer olt-side(Full CLI support) show uni ont tc-layer olt-side current-interval(Full CLI support) show uni ont tc-layer olt-side previous-interval(Full CLI support) show uni ont tc-layer ont-side(Full CLI support) show uni ont tc-layer ont-side current-interval(Full CLI support) show uni ont tc-layer ont-side previous-interval(Full CLI support) show voice ont(Full CLI support) show voice ont call-hist call-hist-num(Full CLI support) show voice ont pots(Full CLI support)
3HH-08079-DDAA-TCZZA 01
Released
19
1 ISAM CLI
show voice ont pots diagnostics(Full CLI support) show voice ont pots pb-dial-tone(Full CLI support) show voice ont pots sip-dial-tone(Full CLI support) show voice ont pots tc-layer(Full CLI support) show voice ont pots tc-layer olt-side(Full CLI support) show voice ont pots tc-layer olt-side current-interval(Full CLI support) show voice ont pots tc-layer olt-side previous-interval interval-nbr(Full CLI support) show voice ont pots tc-layer ont-side(Full CLI support) show voice ont pots tc-layer ont-side current-interval(Full CLI support) show voice ont pots tc-layer ont-side previous-interval interval-nbr(Full CLI support) show voice ont service(Full CLI support) show xdsl ont(Full CLI support) show xdsl ont carrier-data(Full CLI support) show xdsl ont carrier-data far-end(Full CLI support) show xdsl ont carrier-data near-end(Full CLI support) show xdsl ont counters(Full CLI support) show xdsl ont counters far-end(Full CLI support) show xdsl ont counters far-end channel(Full CLI support) show xdsl ont counters far-end channel current-interval(Full CLI support) show xdsl ont counters far-end channel previous-interval interval-no(Full CLI support) show xdsl ont counters far-end line(Full CLI support) show xdsl ont counters far-end line current-interval(Full CLI support) show xdsl ont counters far-end line previous-interval interval-no(Full CLI support) show xdsl ont counters near-end(Full CLI support) show xdsl ont counters near-end channel(Full CLI support) show xdsl ont counters near-end channel current-interval(Full CLI support) show xdsl ont counters near-end channel previous-interval interval-no(Full CLI support) show xdsl ont counters near-end line(Full CLI support) show xdsl ont counters near-end line current-interval(Full CLI support) show xdsl ont counters near-end line previous-interval interval-no(Full CLI support)
20
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show xdsl ont cpe-tuc-inventory(Full CLI support) show xdsl ont cpe-tur-inventory(Full CLI support) show xdsl ont failure-status(Full CLI support) show xdsl ont failure-status far-end(Full CLI support) show xdsl ont failure-status near-end(Full CLI support) show xdsl ont operational-data(Full CLI support) show xdsl ont operational-data far-end(Full CLI support) show xdsl ont operational-data far-end channel(Full CLI support) show xdsl ont operational-data far-end line(Full CLI support) show xdsl ont operational-data near-end(Full CLI support) show xdsl ont operational-data near-end channel(Full CLI support) show xdsl ont operational-data near-end line(Full CLI support) show xdsl ont profiles(Full CLI support) show xdsl ont xdsl-int(Full CLI support) show xstp(FD 36p Ethernet LT (NELT-B)) show xstp bridge(FD 36p Ethernet LT (NELT-B)) show xstp instance(FD 36p Ethernet LT (NELT-B)) show xstp port(FD 36p Ethernet LT (NELT-B)) show xstp port-instance instance(FD 36p Ethernet LT (NELT-B)) Removed Commands configure mcast src(Fixed multicast VLAN per IGMP channel) configure mcast src packagemember(Fixed multicast VLAN per IGMP channel) show bridge port-to-atm-pvc(ISAM-V H248 : CLI enhancements)
Command delta R4.2 versus R4.1.02 Modified Commands admin arp-relay-stats(GPON support) admin bridge learned-unicast-mac unicast-mac-address(GPON support) admin dhcp-relay port-stats(GPON support) admin equipment slot(NRNT-A; mini-ISAM NT) admin igmp channel(GPON support) admin security ext-authenticator(GPON support) admin system cpu-load(NRNT-A; mini-ISAM NT) admin trouble-shooting interface(GPON support) configure alarm entry(IPv6 on HC-L3 NT)
3HH-08079-DDAA-TCZZA 01
Released
21
1 ISAM CLI
configure arp-relay statistics(GPON support) configure bridge port(GPON support) configure debug-trace protocol-trace(IPv6 Protocol Aware CC with DHCPv6 on FD) configure dhcp-relay port-stats(GPON support) configure equipment slot(NANT-E CLI/TL1 Adaptation) configure ethernet line(FD 36p Ethernet LT (NELT-B)) configure igmp channel(GPON support) configure igmp system(GPON support) configure interface port(FD 36p Ethernet LT (NELT-B)) configure pppox-relay cross-connect client-port(GPON support) configure qos dsl-port(GPON support) configure qos interface(GPON support) configure qos interface queue(GPON support) configure qos profiles cac(GPON support) configure qos profiles l2-filter(IPv6 Protocol Aware CC with DHCPv6 on FD) configure qos profiles policer(FD 36p Ethernet LT (NELT-B)) configure qos profiles queue(FD 36p Ethernet LT (NELT-B)) configure qos profiles shaper(GPON support) configure qos shdsl-port(GPON support) configure qos tc-map-dot1p(FD 36p Ethernet LT (NELT-B)) configure qos tca queue(GPON support) configure system(Full CLI support) configure system loop-id-syntax(GPON support) configure system max-lt-link-speed(NANT-E CLI/TL1 Adaptation) configure system security profile(Lawful Intercept) configure system security domain(Full CLI support) configure system security default-profile(Lawful Intercept) configure system security pae authenticator(GPON support) configure system security pae ext-authenticator(GPON support) configure system security pae port(GPON support) configure system security radius(GPON support) configure system security snmp group security-level(Lawful Intercept) configure system security snmp map-user-group(Lawful Intercept) configure system security ssh access(GPON support) configure system sync-if-timing ssm(NRNT-A; mini-ISAM NT)
22
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
configure system sync-if-timing synce(NRNT-A; mini-ISAM NT) configure system syslog destination(GPON support) configure system syslog route(GPON support) configure trap manager(GPON support) configure trap definition(GPON support) configure trouble-shooting statistics interface(GPON support) configure vlan id(IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan port-protocol protocol-group(IPv6 Protocol Aware CC with DHCPv6 on FD) configure vlan unicast-mac vlan-id(GPON support) configure vlan vlan-port unicast-mac(GPON support) configure vlan pbit-statistics port min-dot1p(GPON support) configure voice sip termination(ISAM-V) configure voice sip lineid-syn-prof(ISAM-V) configure voice sip vsp(ISAM-V) configure xdsl overrule-data(standard ARQ for ADSL2(+)and VDSL2) configure xdsl service-profile(SRA for VDSL2) configure xdsl line(standard ARQ for ADSL2(+)and VDSL2) configure xdsl line tca-line-threshold(standard ARQ for ADSL2(+)and VDSL2) configure xdsl-bonding group-profile(8p PTM VDSL2 bonding on FD) show arp-relay-stats(GPON support) show config-data-port igmp(GPON support) show config-data-port qos scheduler-profile(GPON support) show dhcp-relay port-stats(GPON support) show dhcp-relay session(GPON support) show equipment slot(NANT-E CLI/TL1 Adaptation) show equipment temperature(NRNT-A; mini-ISAM NT) show igmp channel counter(GPON support) show igmp channel miscellaneous(GPON support) show igmp channel protocol(GPON support) show interface stack(FD 36p Ethernet LT (NELT-B)) show interface port(FD 36p Ethernet LT (NELT-B)) show interface stack(FD 36p Ethernet LT (NELT-B)) show interface test(FD 36p Ethernet LT (NELT-B)) show mcast active-groups(GPON support)
3HH-08079-DDAA-TCZZA 01
Released
23
1 ISAM CLI
show mcast grp-membership(GPON support) show oper-data-port igmp(GPON support) show pppox-relay cross-connect monitor-statistics client-port(GPON support) show pppox-relay cross-connect session client-port(GPON support) show pppox-relay cross-connect statistics client-port(GPON support) show qos statistics buffer-overflow current-1day(NRNT-A; mini-ISAM NT) show qos statistics queue current-15min(GPON support) show qos statistics queue prev-15min(GPON support) show security pae authenticator(GPON support) show security pae diagnostics(GPON support) show security pae eapol-stats(GPON support) show security pae port-details(GPON support) show security pae session-stats(GPON support) show system cpu-load(NRNT-A; mini-ISAM NT) show system license(NANT-E CLI/TL1 Adaptation) show system memory-usage(NRNT-A; mini-ISAM NT) show trouble-shooting statistics interface(GPON support) show vlan bridge-port-fdb(GPON support) show vlan cross-connect(GPON support) show vlan current-15min-stats(GPON support) show vlan current-day-stats(GPON support) show vlan dup-mac-alarm(GPON support) show vlan pbit-statistics port(GPON support) show vlan port-15min-stats(GPON support) show vlan port-curr-15min-stats(GPON support) show vlan port-curr-day-stats(GPON support) show vlan port-event(GPON support) show vlan port-prev-day-stats(GPON support) show vlan previous-15min-stats(GPON support) show vlan residential-bridge extensive(FD 36p Ethernet LT (NELT-B)) show vlan residential-bridge summary(FD 36p Ethernet LT (NELT-B)) show vlan vlan-day-stats(GPON support) show vlan vmac-bridge-port-fdb(GPON support) show voice sip statistics call interval
24
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show xdsl config-data-port qos scheduler-profile(GPON support) show xdsl oper-data-port igmp(GPON support) New Commands admin ces(Full CLI support) admin ces ont(Full CLI support) admin ces ont line(Full CLI support) admin dhcp-relay v6-port-stats(IPv6 Protocol Aware CC with DHCPv6 on FD) admin equipment ont(Full CLI support) admin equipment ont data-store(Full CLI support) admin equipment ont interface(Full CLI support) admin equipment ont slot(Full CLI support) admin equipment ont sw-ctrl(Full CLI support) admin equipment ont sw-version(Full CLI support) admin ont-xdsl-line loop-diagnostic(Full CLI support) admin pon(Full CLI support) admin pon ber-stats(Full CLI support) admin voice(Full CLI support) admin voice ont(Full CLI support) admin voice ont pots(Full CLI support) admin voice ont pots diagnostics mode(Full CLI support) admin voice ont pots pb-dial-tone slow-pull-timer(Full CLI support) admin voice ont pots sip-dial-tone sip-phone-number(Full CLI support) configure ani(Full CLI support) configure ani ont(Full CLI support) configure ani ont tca-thresh tca-thresh lower-optical-th(Full CLI support) configure ani ont video(Full CLI support) configure ces(Full CLI support) configure ces ont(Full CLI support) configure ces ont profile(Full CLI support) configure ces ont service(Full CLI support) configure ces ont line mode(Full CLI support) configure ces ont line port pm-collect(Full CLI support) configure ces ont service service-nbr(Full CLI support) configure dhcp-relay v6-port-stats(IPv6 Protocol Aware CC with DHCPv6 on FD)
3HH-08079-DDAA-TCZZA 01
Released
25
1 ISAM CLI
configure equipment ont(Full CLI support) configure equipment ont interface(Full CLI support) configure equipment ont interface tc-layer-threshold(Full CLI support) configure equipment ont slot(Full CLI support) configure equipment ont sw-ctrl(Full CLI support) configure equipment ont interface tc-layer(Full CLI support) configure ethernet line mau(FD 36p Ethernet LT (NELT-B)) configure ethernet ont cust-info(Full CLI support) configure ethernet ont port pm-collect(Full CLI support) configure l2uni(Full CLI support) configure l2uni ont(Full CLI support) configure l2uni ont performance-monitor pm-collect(Full CLI support) configure l2uni ont tc-layer-threshold dropped-frames-up(Full CLI support) configure linetest(ISAM-V H248 : CLI enhancements) configure linetest cluster(ISAM-V H248 : CLI enhancements) configure linetest cluster ltparm(ISAM-V H248 : CLI enhancements) configure linetest cluster ltline(ISAM-V H248 : CLI enhancements) configure linetest cluster ltparm(ISAM-V H248 : CLI enhancements) configure linetest cluster ltsession(ISAM-V H248 : CLI enhancements) configure linetest single(ISAM-V H248 : CLI enhancements) configure linetest single ltline(ISAM-V H248 : CLI enhancements) configure linetest single ltparm tst-type(ISAM-V H248 : CLI enhancements) configure linetest single ltsession session-cmd(ISAM-V H248 : CLI enhancements) configure link-agg(FD 36p Ethernet LT (NELT-B)) configure link-agg general priority(FD 36p Ethernet LT (NELT-B)) configure link-agg group load-sharing-policy max-active-port(FD 36p Ethernet LT (NELT-B)) configure link-agg group port(FD 36p Ethernet LT (NELT-B)) configure link-agg port passive-lacp(FD 36p Ethernet LT (NELT-B)) configure mcast monitor(GPON support) configure mcast monitor src(GPON support) configure mcast static(FD 36p Ethernet LT (NELT-B)) configure mcast static branch(FD 36p Ethernet LT (NELT-B))
26
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
configure ntp(Full CLI support) configure ntp ont(Full CLI support) configure pon(Full CLI support) configure pon power-shed-prof(Full CLI support) configure pon interface label(Full CLI support) configure pon interface tc-layer pm-collect(Full CLI support) configure pon interface tc-layer-threshold(Full CLI support) configure qos interface upstream-queue(GPON support) configure qos profiles bandwidth(GPON support) configure qos profiles ingress-qos(GPON support) configure qos profiles scheduler-node(GPON support) configure system pon-ont slid-mode(Full CLI support) configure system security li separate(Lawful Intercept) configure uni(Full CLI support) configure uni ont(Full CLI support) configure uni ont tc-layer(Full CLI support) configure uni ont video pwr-override(Full CLI support) configure voice ont(Full CLI support) configure voice ont service(Full CLI support) configure voice ont pots custinfo(Full CLI support) configure voice ont tc-layer pm-collect(Full CLI support) configure xdsl rtx-profile rtx-profile(standard ARQ for ADSL2(+)and VDSL2) configure xdsl ont(Full CLI support) configure xdsl ont service-profile(Full CLI support) configure xdsl ont spectrum-profile(Full CLI support) configure xdsl ont line service-profile(Full CLI support) configure xdsl ont spectrum-profile vdsl(Full CLI support) configure xdsl ont spectrum-profile vdsl2(Full CLI support) configure xstp(FD 36p Ethernet LT (NELT-B)) configure xstp instance(FD 36p Ethernet LT (NELT-B)) configure xstp general enable-stp(FD 36p Ethernet LT (NELT-B)) configure xstp instance associate-vlan(FD 36p Ethernet LT (NELT-B)) configure xstp port priority(FD 36p Ethernet LT (NELT-B)) configure xstp port-instance instance(FD 36p Ethernet LT (NELT-B)) mrinfo(PIM-SSM on HC-L3 NT) mstat(PIM-SSM on HC-L3 NT)
3HH-08079-DDAA-TCZZA 01
Released
27
1 ISAM CLI
mtrace(PIM-SSM on HC-L3 NT) show alarm current eqpt-supplemental(GPON support) show alarm current ihub-ipv6(IPv6 on HC-L3 NT) show alarm current mcsrc(GPON support) show alarm current pim(PIM-SSM on HC-L3 NT) show alarm current sip-user-agent(minor problem solving) show alarm current vlanport(GPON support) show alarm log eqpt-supplemental(GPON support) show alarm log ihub-ipv6(IPv6 on HC-L3 NT) show alarm log mcsrc(GPON support) show alarm log pim(PIM-SSM on HC-L3 NT) show alarm log sip-user-agent(minor problem solving) show alarm log vlanport(GPON support) show alarm snap-shot eqpt-supplemental(GPON support) show alarm snap-shot ihub-ipv6(IPv6 on HC-L3 NT) show alarm snap-shot mcsrc(GPON support) show alarm snap-shot pim(PIM-SSM on HC-L3 NT) show alarm snap-shot sip-user-agent(minor problem solving) show alarm snap-shot vlanport(GPON support) show ani(Full CLI support) show ani ont(Full CLI support) show ani ont operational-data(Full CLI support) show ani ont video(Full CLI support) show ani ont video-stats(Full CLI support) show ces(Full CLI support) show ces ont(Full CLI support) show ces ont line(Full CLI support) show ces ont line port(Full CLI support) show ces ont line port current-interval(Full CLI support) show ces ont line port previous-interval interval-nbr(Full CLI support) show ces ont service(Full CLI support) show ces ont service operational-data(Full CLI support) show ces ont service pseudo-wire(Full CLI support) show ces ont service pseudo-wire current-interval(Full CLI support) show ces ont service pseudo-wire previous-interval interval-nbr(Full CLI support) show ces ont service tc-layer(Full CLI support)
28
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show ces ont service tc-layer olt-side(Full CLI support) show ces ont service tc-layer olt-side current-interval(Full CLI support) show ces ont service tc-layer olt-side previous-interval interval-nbr(Full CLI support) show ces ont service tc-layer ont-side(Full CLI support) show ces ont service tc-layer ont-side current-interval(Full CLI support) show ces ont service tc-layer ont-side previous-interval(Full CLI support) show dhcp-relay v6-port-stats(IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan(IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6extensive(IPv6 Protocol Aware CC with DHCPv6 on FD) show dhcp-relay v6-port-stats vlan v6summary(IPv6 Protocol Aware CC with DHCPv6 on FD) show equipment ont(Full CLI support) show equipment ont data-store(Full CLI support) show equipment ont interface(Full CLI support) show equipment ont operational-data(Full CLI support) show equipment ont optics(Full CLI support) show equipment ont optics-history(Full CLI support) show equipment ont pwr-shed(Full CLI support) show equipment ont slot(Full CLI support) show equipment ont sw-ctrl(Full CLI support) show equipment ont sw-download(Full CLI support) show equipment ont sw-version(Full CLI support) show equipment ont tc-layer(Full CLI support) show equipment ont tc-layer olt-side(Full CLI support) show equipment ont tc-layer olt-side current-interval(Full CLI support) show equipment ont tc-layer olt-side previous-interval interval-num(Full CLI support) show equipment ont tc-layer olt-side-on-demand(Full CLI support) show equipment ont tc-layer olt-side-on-demand current-interval(Full CLI support) show equipment ont tc-layer olt-side-on-demand previous-interval interval-num(Full CLI support) show equipment ont tc-layer ont-side(Full CLI support)
3HH-08079-DDAA-TCZZA 01
Released
29
1 ISAM CLI
show equipment ont tc-layer ont-side current-interval(Full CLI support) show equipment ont tc-layer ont-side previous-interval(Full CLI support) show ethernet ont(Full CLI support) show ethernet ont operational-data(Full CLI support) show ethernet ont port(Full CLI support) show ethernet ont port current-interval(Full CLI support) show ethernet ont port previous-interval interval-num(Full CLI support) show ethernet statistics(FD 36p Ethernet LT (NELT-B)) show ethernet statistics line(FD 36p Ethernet LT (NELT-B)) show l2uni(Full CLI support) show l2uni ont(Full CLI support) show l2uni ont performance-data(Full CLI support) show l2uni ont performance-data current-interval(Full CLI support) show l2uni ont performance-data previous-interval interval-nbr(Full CLI support) show linetest(ISAM-V H248 : CLI enhancements) show linetest cluster(ISAM-V H248 : CLI enhancements) show linetest cluster avail-sess(ISAM-V H248 : CLI enhancements) show linetest cluster lineid-ext-rept lineid(ISAM-V H248 : CLI enhancements) show linetest cluster ltline lineid(ISAM-V H248 : CLI enhancements) show linetest cluster ltsession(ISAM-V H248 : CLI enhancements) show linetest single(ISAM-V H248 : CLI enhancements) show linetest single avail-sess(ISAM-V H248 : CLI enhancements) show linetest single lineid-ext-rept lineid(ISAM-V H248 : CLI enhancements) show linetest single ltline lineid(ISAM-V H248 : CLI enhancements) show linetest single ltsession(ISAM-V H248 : CLI enhancements) show link-agg(FD 36p Ethernet LT (NELT-B)) show link-agg group-info(FD 36p Ethernet LT (NELT-B)) show link-agg member-port port(FD 36p Ethernet LT (NELT-B)) show link-agg port-info(FD 36p Ethernet LT (NELT-B)) show pon(Full CLI support) show pon ber-stats ont-num(Full CLI support) show pon interface(Full CLI support) show pon interface tc-layer(Full CLI support)
30
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show pon interface tc-layer current-interval(Full CLI support) show pon interface tc-layer previous-interval interval-nbr(Full CLI support) show pon optics(Full CLI support) show pon sfp-inventory(Full CLI support) show pon sw-download(Full CLI support) show pppoel2-stats(Porting FTTU) show pppoel2-stats vlan(Porting FTTU) show pppoel2-stats vlan extensive(Porting FTTU) show pppoel2-stats vlan summary(Porting FTTU) show qos interface-bandwidth(GPON support) show qos pcc-rules fwd-port rule(Full CLI support) show qos profile-usage bandwidth(GPON support) show qos profile-usage ingress-qos(GPON support) show qos profile-usage scheduler-node(GPON support) show qos statistics lt-queue(GPON support) show qos statistics lt-queue current-15min(GPON support) show qos statistics lt-queue prev-15min(GPON support) show qos tc-to-qmap(GPON support) show trouble-shooting pon(PT Counters) show trouble-shooting pon statistics(PT Counters) show trouble-shooting pon statistics interface(PT Counters) show uni(Full CLI support) show uni ont(Full CLI support) show uni ont tc-layer(Full CLI support) show uni ont tc-layer olt-side(Full CLI support) show uni ont tc-layer olt-side current-interval(Full CLI support) show uni ont tc-layer olt-side previous-interval interval-nbr(Full CLI support) show uni ont tc-layer ont-side(Full CLI support) show uni ont tc-layer ont-side current-interval(Full CLI support) show uni ont tc-layer ont-side previous-interval(Full CLI support) show vlan fdb-board vlan-id(GPON support) show voice ont(Full CLI support) show voice ont call-hist call-hist-num(Full CLI support) show voice ont pots(Full CLI support) show voice ont pots diagnostics(Full CLI support) show voice ont pots pb-dial-tone(Full CLI support)
3HH-08079-DDAA-TCZZA 01
Released
31
1 ISAM CLI
show voice ont pots sip-dial-tone(Full CLI support) show voice ont pots tc-layer(Full CLI support) show voice ont pots tc-layer olt-side(Full CLI support) show voice ont pots tc-layer olt-side current-interval(Full CLI support) show voice ont pots tc-layer olt-side previous-interval interval-nbr(Full CLI support) show voice ont pots tc-layer ont-side(Full CLI support) show voice ont pots tc-layer ont-side current-interval(Full CLI support) show voice ont pots tc-layer ont-side previous-interval interval-nbr(Full CLI support) show voice ont service(Full CLI support) show xdsl ont(Full CLI support) show xdsl ont carrier-data(Full CLI support) show xdsl ont carrier-data far-end(Full CLI support) show xdsl ont carrier-data near-end(Full CLI support) show xdsl ont counters(Full CLI support) show xdsl ont counters far-end(Full CLI support) show xdsl ont counters far-end channel(Full CLI support) show xdsl ont counters far-end channel current-interval(Full CLI support) show xdsl ont counters far-end channel previous-interval interval-no(Full CLI support) show xdsl ont counters far-end line(Full CLI support) show xdsl ont counters far-end line current-interval(Full CLI support) show xdsl ont counters far-end line previous-interval interval-no(Full CLI support) show xdsl ont counters near-end(Full CLI support) show xdsl ont counters near-end channel(Full CLI support) show xdsl ont counters near-end channel current-interval(Full CLI support) show xdsl ont counters near-end channel previous-interval interval-no(Full CLI support) show xdsl ont counters near-end line(Full CLI support) show xdsl ont counters near-end line current-interval(Full CLI support) show xdsl ont counters near-end line previous-interval interval-no(Full CLI support) show xdsl ont cpe-tuc-inventory(Full CLI support) show xdsl ont cpe-tur-inventory(Full CLI support)
32
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show xdsl ont failure-status(Full CLI support) show xdsl ont failure-status far-end(Full CLI support) show xdsl ont failure-status near-end(Full CLI support) show xdsl ont operational-data(Full CLI support) show xdsl ont operational-data far-end(Full CLI support) show xdsl ont operational-data far-end channel(Full CLI support) show xdsl ont operational-data far-end line(Full CLI support) show xdsl ont operational-data near-end(Full CLI support) show xdsl ont operational-data near-end channel(Full CLI support) show xdsl ont operational-data near-end line(Full CLI support) show xdsl ont profiles(Full CLI support) show xdsl ont xdsl-int(Full CLI support) show xstp(FD 36p Ethernet LT (NELT-B)) show xstp bridge(FD 36p Ethernet LT (NELT-B)) show xstp instance(FD 36p Ethernet LT (NELT-B)) show xstp port(FD 36p Ethernet LT (NELT-B)) show xstp port-instance(FD 36p Ethernet LT (NELT-B)) Removed Commands configure mcast src(Fixed multicast VLAN per IGMP channel) configure mcast src packagemember(Fixed multicast VLAN per IGMP channel) configure qos profiles scheduler(GPON support) show qos profile-usage scheduler(GPON support) show vlan fdb mac((GPON support) show bridge port-to-atm-pvc(ISAM-V H248:CLI enhancements)
Command delta R4.1.02 versus R4.1 Modified Commands admin shdsl-seg unit-id(SHDSL evolution on NSLT-b) configure alarm entry(ADSLx/VDSL TPS-TC) configure shdsl segment unit-id(SHDSL evolution on NSLT-b) configure shdsl span(SHDSL evolution on NSLT-b) configure shdsl unit unit-id(SHDSL evolution on NSLT-b) configure system sync-if-timing(Sync Ethernet feature) configure system sync-if-timing ssm(Sync Ethernet feature) configure trap manager(Sync Ethernet feature)
3HH-08079-DDAA-TCZZA 01
Released
33
1 ISAM CLI
show shdsl inventory(SHDSL evolution on NSLT-b) show shdsl segment-counters current-15min(SHDSL evolution on NSLT-b) show shdsl segment-counters current-1day(SHDSL evolution on NSLT-b) show shdsl segment-counters previous-15min(SHDSL evolution on NSLT-b) show shdsl segment-counters previous-1day(SHDSL evolution on NSLT-b) show shdsl segment-status(SHDSL evolution on NSLT-b) show shdsl unit-status(SHDSL evolution on NSLT-b) show system license(redundancy feature)
Command delta R4.1 versus R4.0.02 Modified Commands admin bridge learned-unicast-mac(VLAN translation feature) admin system cpu-load(ISAM-V,SIP POTS statistics feature) configure alarm entry(new alarms MPLS,SIP POTS statistics feature) configure equipment applique(NCFC-F sync ethernet feature) configure equipment external-link-assign(problem solving) configure igmp channel(IGMP forking application feature) configure igmp system(IGMP forking application feature) configure l2cp session(MPLS feature) configure qos dsl-port queue(8 queue support on IFX feature) configure qos interface queue(8 queue support on IFX feature) configure qos profiles queue(8 queue support on IFX feature) configure qos shdsl-port queue(8 queue support on IFX feature) configure qos tc-map-dot1p(8 queue support on IFX feature) configure system(Management port on FD-REM) configure system security ssh access(mgmt security feature) configure system sync-if-timing ssm(Synchronous Ethernet) configure system sync-if-timing synce(Synchronous Ethernet) configure vlan id(vMac in DHCP Option61 feature) configure voice sip vsp(minor problem solving) configure xdsl spectrum-profile adsl-adsl2(annex-j masks ADLU-32/ADLU-48 feature) configure xdsl spectrum-profile adsl2-plus(annex-j masks ADLU-32/ADLU-48 feature) configure xdsl spectrum-profile vdsl(typeB and proxyversion)
34
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
show equipment external-link-host(minor problem solving) show equipment temperature(minor problem solving) show l2cp partition(improvement) show system cpu-load(ISAM-V,SIP POTS statistics feature) show system memory-usage(ISAM-V,SIP POTS statistics feature) show vlan corss-connect(VLAN translation feature) show vlan fdb(VLAN translation feature) show system license(SHDSL Evolution on NSLT-B) New Commands admin system security kill-debug(mgmt security feature) configure qos profiles shaper(8 queue support on IFX feature) configure service epipe(MPLS feature) configure service sdp(MPLS feature) configure system security peripheral-mgnt(Management port on FD-REM) configure vlan vlan-port(VLAN translation feature) configure voice sip termination tca(ISAM-V,SIP POTS statistics feature) monitor service(MPLS feature) show qos profile-usage shaper(8 queue support on IFX feature) show vlan residential-bridge summary(VLAN translation feature) show vlan residential-bridge extensive(VLAN translation feature) show voice sip statistics(ISAM-V,SIP POTS statistics feature) show alarm current epipe(MPLS feature) show alarm current ldp(MPLS feature) show alarm current mpls(MPLS feature) show alarm current sdp(MPLS feature) show alarm log epipe(MPLS feature) show alarm log ldp(MPLS feature) show alarm log mpls(MPLS feature) show alarm log sdp(MPLS feature) show alarm snap-shot epipe(MPLS feature) show alarm snap-shot ldp(MPLS feature) show alarm snap-shot mpls(MPLS feature) show alarm snap-shot sdp(MPLS feature) Removed Commands show bridge port(VLAN translation feature)
3HH-08079-DDAA-TCZZA 01
Released
35
1 ISAM CLI
show vlan port-vlan-map(VLAN translation feature) show vlan residential-bridge(VLAN translation feature) admin voice cluster(not supported) configure voice cluster(not supported) show voice cluster(not supported)
36
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
1.2 Preface Scope This user guide describes the Command Line Interface (CLI) commands supported by the Alcatel-Lucent 7302 ISAM and 7330 ISAM FTTN. These commands are used for installation, configuration, management and troubleshooting.
User Profile The guide is intended for operating personnel (sometimes called craft persons).
The CLI Structure The ISAM CLI is a command-driven interface accessible via telnet or via the craft terminal. The CLI can be used to configure and manage ISAM equipment.
3HH-08079-DDAA-TCZZA 01
Released
37
1 ISAM CLI
1.3 CLI Commands Command Types The commands of the CLI language can be divided into two groups: global and environmental commands. Global commands (such as the logout command) can be entered in any context and have the same effect in each context. Environmental commands (such as the info command) can only be entered in some contexts (for example, the info command cannot be used in the show node) and have a different effect in each context. The purpose of the command (for example, showing the configuration) is the same but the implementation or the generated output is different. Some commands are also implicit. For example, when you enter only the node name configure system security snmp community fden, you run an implicit command that changes your context to the specified node and that creates this node if it did not previously exist. The available commands are discussed in a separate chapter.
Access Rights Not every operator can execute every command. Access to commands is granted via the operator profile. It is possible that an operator can execute a given command in one context and not in another.
Options and Parameters Commands can have options and parameters. Options are special parameters that are context insensitive. For example, you can enter the option detail after info in any context. Options must be given at the end of the command preceeding the filter and printer specifications.
Different look and feel for IHUB CLI commands A multi-core system exists of two cli parsers. This can result in a different behavior and sometimes a different look and feel, depending on the cli parser which is handling the command. This section lists the most important differences in "behavior / look and feel" for the cli commands listed in the different IHUB CLI guides, compared to the cli commands listed in this document, and compared to the description of ISAM CLI in the subsections of this chapter. Command Completion: command can complete with a root command iso the IHUB command if the characters before the completion are similar to the characters of the root command no command completion for combined types (e.g. nt-a:sfp:1) no command completion for parameter alternatives command completion can cease to work when entering a range
38
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
Ranges: a range allows only decimal numeric values command execution with numerical ranges will fail when a context change occured commands which contain a valid range syntax (no context change), are executed without displaying the different individual commands Prompt: dynamic resource-id is not displayed in the prompt Online Help: global command not supported for IHUB commands : use or online help not scaled down (not restrictive) depending the installed equipment practice no online help for combined types General: global command returns to the context from which the current level was entered keystroke not supported Info Command: info command must be executed from within a node, it cannot take an argument the output format option "xml" is not applicable, only a textual (=hierarchical) output is supported Show Command: the output is tailored depending on the provided parameters Absolute path: Cli commands can be executed in any context by specifying the full path from the CLI root. The command may or may not change the current context, depending on whether or not it is a leaf command IACM command execution after executing "exit" : IACM command execution can cease to work when the command was entered after executing the "exit" command from within an IHUB context, for which the parent node has both: IACM and IHUB children nodes Tree Command: When a tree command is executed in a node who has both :IACM and IHUB subnodes, the indentation in the tree structure gets lost for the IHUB related subnodes
3HH-08079-DDAA-TCZZA 01
Released
39
1 ISAM CLI
1.4 Nodes Node Definition A command definition tree, further abbreviated to "command tree" is a structure of nested command nodes from which CLI commands can be derived. A command node consists of a node name and zero or more resource identifiers. The resource identifiers behave like parameters, but identify a particular resource. For example, public in configure system security snmp community public is an unnamed resource identifier of the node community. One such command node identifies a context. A CLI command can be derived from a command tree starting from the root node, but a command with the same meaning and impact can also be derived from a lower level node or subnode. The following are examples of equivalent commands: • info configure system security snmp community public in any node. • info system security snmp community public in node configure • info security snmp community public in node configure system • info snmp community public in node configure system security • info community public in node configure system security snmp • info in node configure system security snmp community public The root node is the highest level. Directly below the root node are important command nodes such as configure and show.
Node Creation A dynamic node is a sub-node of the configure node that corresponds to a configurable resource that an operator can create. An operator can create a dynamic node by navigating to it. The system will automatically create the node. The operator can configure its prompt in such a way that it shows if the operator navigated to an existing or a new node. The ability to create nodes is limited by the access rights of the user. It is also possible that the system creates additional subnodes in other nodes, for example, in the show node due to the creation of a new dynamic node in the configure node.
Node Deletion A dynamic node can be deleted by placing no in front of the node name. For example, configure system security snmp no community public deletes the specified node and all its subnodes. The ability to delete nodes is limited by the access rights of the operator.
Resource Attributes The value of resource attributes can be changed by entering the name of the resource attribute followed by the new value. For example, password plain:secret sets the value of the resource attribute named password to the plain text string secret. Resource attributes can be set to their default value by entering no followed by the name of the resource attribute. For example, no password sets the value of the resource attribute named password to the default value (no password required).
40
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
1.5 Parameters Named and Unnamed Parameters Parameters are characterised by a name and a type. Parameters can be named or unnamed. Named parameters are entered as two tokens: a keyword and a value (for example, password plain:secret). Some commands (such as info) require only the keyword. Only the value token is entered for unnamed parameters (for example, public in the node name community public). Most options and first resource identifiers are unnamed. Parameters can be entered in any order. Only unnamed keys must be entered directly after the node name.
Parameter Types Parameter values belong to a parameter type. Parameter types limit the parameter values to strings that the system can understand. Parameter types consists of 1 to N fields with separators in between. Each field belongs to a basic type. The separator is in most cases a colon : or a slash /. The name of parameter types always starts with an uppercase character and can contain an optional domain name. The domain name is separated from the parameter name by ::. The sequence in which the fields appear can differ in case one of the fields belongs to an enumeration type. For example, if provided some possible values for the parameter type ExtendedFileName (the first field is an enumeration field with possible values file and ftp, host-name, user-name, password and local-file are also fields): • file: local-file • ftp: host-name @ user-name : password / local-file Parameter types are built by combining 1 to N basic types.
Basic Types Basic types can be divided in two groups: fixed length basic types and variable length basic types. Examples of variable length basic types are: • integers • printable strings (representing operator chosen names or descriptions) • SNMP object identifiers • binary strings The length of a variable length basic type is in most cases limited. The definition of logical length depends on the basic type: number of characters for printable strings, number of bytes for binary strings, and number of numbers in the object identfier for SNMP object identifiers. Examples of fixed length basic types are: • ip-address • fixed-length printable strings • enumeration types (limited list of allowed strings)
3HH-08079-DDAA-TCZZA 01
Released
41
1 ISAM CLI
Basic Type Formatting Rules Integers can be entered in a decimal format. Large integers can be abbreviated as follows: • decimal-number k which is equal to decimal-number *1000 (For example: 3k is equal to 3000) • decimal-number M which is equal to decimal-number *1000000 • decimal-number G which is equal to decimal-number *1000000000 Binary strings must be entered as: hex-byte : hex-byte :...: hex-byte. hex-byte is a number between 0 and 255 in hexadecimal format (all lowercase).For example, 3f:23:ff:b2 is a valid binary string. Object identifiers and ipv4-addresses must be entered as: decimal-number . decimal-number ..... decimal-number.For example, 128.17.32.45 is a valid object identifier. The values of all fields may be placed within double quotes. A field separator can never be placed within double quotes. For example, "1"/"1" is a valid shelf identifier, but "1/1" is not a valid shelf identifier. A field value can contain multiple double quotes. For example, "hallo world" is equivalent to hallo" "world or to "hallo"" ""world". Printable strings must be placed within double quotes if they contain special characters: double quote ", a backslash \, a question mark ?, a cross #, a space, a tab, a carriage return, or a new line. The backslash \ is the escape character. The double quote " and backslash \ characters must be preceded by the escape character. The \ char is equivalent to char with the following exceptions: • \r : carriage-return • \t : tab • \n : new-line In some cases it is possible that a command is ambiguous. For example, info operator detail can be interpreted in two ways: list the configuration of the operator with the name detail or list the configuration of all operators in detail. The ambiguity is solved by the parser in the following way: if the string contains quotes, it is interpreted as a printable string, otherwise it is interpreted as a keyword. For example, info operator "detail" lists the configuration of the operator with the name detail and info operator detail lists the configuration of all operators in detail.
Syntax Check The system verifies if each typed character is syntactically correct. In case the system detects a syntax error, it will position the cursor at the offending character and beep. This can give strange effects if you are entering characters in the 'insert mode': the invalid characters will shift to the right and any newly entered character will be inserted in front of the faulty characters. To avoid this strange effect, it is recommended to work in the (default) overwrite mode.
Command Repetition Values of parameters may contain decimal, hexadecimal or character ranges. These ranges indicate that the concerned command must be repeated a number of times with the different values as specified in the range. Decimal ranges are entered as [ d: start...end ] in which start and end are integers. Example of a decimal range: lt:1/1/[4...16] Hexadecimal ranges are entered as [ h: start...end ] in which start and end are hexadecimal numbers. start and end values may not contain uppercase characters and the number of characters of the first start value determines the number of characters to be entered for the following values in the range. Example of a hexadecimal range:
42
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
03:06:ff:[h:aa...bd] Character ranges are entered as [ c: start...end ] in which start and end are characters. start and end value must belong to the same character class: digit, lowercase or uppercase. Special characters are not allowed. Example of a character range : operator[c:a...f] Ranging is not supported for float values Ranges have following restrictions: • One command may only contain 1 range. • The default range type is decimal. It will be used if the type is not explicitely mentioned with 'd:' , 'h:' or 'c:'. • Subranges can be separated with a comma. For example: [d:17...19,32,60...62] will be replaced consecutively with the values 17, 18, 19, 32, 60, 61 and 62. • Ranges between quotes are not expanded. • Command completion may refuse to work once a range is entered. • Execution of command repetition will stop once an iteration in the range fails. The system sometimes restricts which range type may be used: the system only allows a decimal range where a decimal number can be entered or a hexadecimal range where a hexadecimal number can be entered. It even imposes that the range replaces completely the number. Example: 1[2...3] is invalid, [12...13] must be entered instead. Also the start and end of the range must fall in the allowed range for the number. Only text strings may contain all types of ranges. The way the system handles a range depends on the command. • Some commands can handle ranges directly. Repeating the command will be done internally. The command will then behave for the operator as a normal command.. • For the other commands, the system will execute the command end - start + 1 times in which the specified range is each time replaced by a number out of the range. Each expanded command is shown to the operator. Commands that normally change the context, don't do this in this case. The command repetition can be stopped via an interrupt. • Range commands in combination with help "?" character always show the complete list of available parameters and subnodes and do not suppress subnodes in case of the existing nodes.
Obsolete and Replaced Parameters Parameters can become obsolete or parameters are substituted by new parameters. See the definition and strategy in section 1.11 CLI Backward Compatibility.
3HH-08079-DDAA-TCZZA 01
Released
43
1 ISAM CLI
1.6 Filters The language provides filters to manipulate the output of commands. The available filters are discussed in detail in a separate chapter. Filters can be specified in case the command generates output. They are separated from the basic command with a pipe character |. The user can specify a sequence of filters as in following example: info | match exact:1/1 | count lines.
44
Released
3HH-08079-DDAA-TCZZA
01
1 ISAM CLI
1.7 Printers The language provides printers to allow the user to decide how the output must be printed on his terminal. The available printers are discussed in detail in a separate chapter. Printers can be specified in case the command generates output. They are separated from the basic command with a pipe character |. The user can specify maximum one printer as in following example: info | match exact:1/1 | more The default printer can be specified for the CLI session or the operator.
3HH-08079-DDAA-TCZZA 01
Released
45
1 ISAM CLI
1.8 Getting help The user can get help in two ways. The first is using the help command. This gives an extensive explanation on the command. The user can also enter a question-mark ? at each position in the command. He will then get a short explanation on what he can enter at this position in the command. For example: configure system security operator ? gives following output:
: the name of the operator [a-z0-9] (1 configure alarm delta-log [ indet-log-full-action ] [ warn-log-full-action ] [ minor-log-full-action ] [ major-log-full-action ] [ crit-log-full-act ]
Command Parameters Table 3.4-2 "Alarm Delta Log Configuration Command" Command Parameters Parameter
Type
Description
indet-log-full-action
Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap
optional parameter set the action when indeterminate log buffer is full
warn-log-full-action
minor-log-full-action
major-log-full-action
86
Released
optional parameter action in case indeterminate delta log buffer is full
optional parameter set the action when minor delta log buffer is full
optional parameter set action when major delta log buffer is full
3HH-08079-DDAA-TCZZA
01
3 Alarm Configuration Commands
Parameter
crit-log-full-act
3HH-08079-DDAA-TCZZA 01
Type
Description
| halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full Parameter type: Format: ( wrap | halt ) Possible values: - wrap : wrap around when log is full - halt : halt logging when log is full
optional parameter set action when critical delta log buffer is full
Released
87
3 Alarm Configuration Commands
3.5 Customizable Alarm Profile Configuration Command Command Description This command allows the operator to configure the external alarm profile. The profile is made to be assigned to a remote LT board. The profile reflects a configuration of external alarms parameters that corresponds to a certain environment where the remote board is located (in an outdoor cabinet, basement cabinet, ...). The use of a profile avoids the need to specify the parameters for each remote board separately. The alarm profile groups all five external alarms parameters. The profile contains a description/meaning of each alarm, as well as an indication that tells us whether or not any alarm outputs are to be triggered if the corresponding external input alarm is raised. On top of these parameters, a mnemonic (short for the description), the polarity and the severity are configurable.
User Level The command can be accessed by operators with alarm privileges, and executed by operators with alarm privileges.
Command Syntax The command has the following syntax: > configure alarm ( no custom-profile (name) ) | ( custom-profile (name) [ no mnemonic1 | mnemonic1 ] [ no description1 | description1 ] [ no visible1 | visible1 ] [ no audible1 | audible1 ] [ no polarity1 | polarity1 ] [ no severity1 | severity1 ] [ no mnemonic2 | mnemonic2 ] [ no description2 | description2 ] [ no visible2 | visible2 ] [ no audible2 | audible2 ] [ no polarity2 | polarity2 ] [ no severity2 | severity2 ] [ no mnemonic3 | mnemonic3 ] [ no description3 | description3 ] [ no visible3 | visible3 ] [ no audible3 | audible3 ] [ no polarity3 | polarity3 ] [ no severity3 | severity3 ] [ no mnemonic4 | mnemonic4 ] [ no description4 | description4 ] [ no visible4 | visible4 ] [ no audible4 | audible4 ] [ no polarity4 | polarity4 ] [ no severity4 | severity4 ] [ no mnemonic5 | mnemonic5 ] [ no description5 | description5 ] [ no visible5 | visible5 ] [ no audible5 | audible5 ] [ no polarity5 | polarity5 ] [ no severity5 | severity5 ] )
Command Parameters Table 3.5-1 "Customizable Alarm Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(name)
Format: - a profile name - range: [a-zA-Z0-9-_.]
custom profile name
88
Released
3HH-08079-DDAA-TCZZA
01
3 Alarm Configuration Commands
Resource Identifier
Type
Description
- length: 1 configure xdsl ( no dpbo-profile (index) ) | ( dpbo-profile (index) name [ no es-elect-length | es-elect-length ] [ no es-cable-model-a | es-cable-model-a ] [ no es-cable-model-b | es-cable-model-b ] [ no es-cable-model-c | es-cable-model-c ] [ no min-usable-signal | min-usable-signal ] [ no min-frequency | min-frequency ] [ no max-frequency | max-frequency ] [ no rs-elect-length | rs-elect-length ] [ no muf-control | muf-control ] [ no offset | offset ] [ [ no ] active ] [ no modification | modification ] )
Command Parameters Table 7.21-1 "xDSL DPBO Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - a profile index value - range: [1...50]
index of profile
Table 7.21-2 "xDSL DPBO Profile Configuration Command" Command Parameters Parameter
Type
Description
name
Parameter type: Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1 configure xdsl dpbo-profile (index) micpsd-pt-down (psd-point) ] [ no psd | psd ]
[
no
frequency
|
frequency
Command Parameters Table 7.22-1 "xDSL DPBO Mode Independent Custom PSD Mask Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - a profile index value - range: [1...50] Format: - psd point - range: [1...32]
index of profile
(psd-point)
psd point
Table 7.22-2 "xDSL DPBO Mode Independent Custom PSD Mask Configuration Command" Command Parameters
206
Released
3HH-08079-DDAA-TCZZA
01
7 xDSL Configuration Commands
Parameter
Type
Description
[no] frequency
Parameter type: Format: - frequency - unit: khz - range: [0...30000] Parameter type: Format: - psd level (-10 * PSD-level) - unit: -10*dBm/Hz - range: [0...1275]
optional parameter with default value: 0L psd frequency
[no] psd
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: 0L psd level
Released
207
7 xDSL Configuration Commands
7.23 xDSL DPBO Exchange PSD Mask Configuration Command Command Description This command specifies the Assumed Exchange PSD mask to be protected by the DPBO shaping mechanism at the remote flexibility point. This parameter matches the DPBOEPSD parameter described in ITU-T G.997.1 A number of 2 to 16 PSD points can be specified. The successive PSD points must have increasing (>/=) frequencies. It is allowed that for two successive PSD points, different PSD levels are defined at a same frequency (brickwall). Only PSD values within the standard range from -95 to 0 dBm/Hz are guaranteed. When all break points are set to default values (frequency 0, psd 0), the psd shape is cleared. To clear the entire shape at once, set the first two breakpoints to default values. When any other breakpoint is set to default values, all points following it will also be set to the default values.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure xdsl dpbo-profile (index) epsd-pt-down (psd-point) [ no frequency | frequency ] [ no psd | psd ]
Command Parameters Table 7.23-1 "xDSL DPBO Exchange PSD Mask Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - a profile index value - range: [1...50] Format: - psd point - range: [1...16]
index of profile
(psd-point)
psd point
Table 7.23-2 "xDSL DPBO Exchange PSD Mask Configuration Command" Command Parameters Parameter
Type
Description
[no] frequency
Parameter type: Format: - frequency - unit: khz - range: [0...30000] Parameter type: Format: - psd level (-10 * PSD-level)
optional parameter with default value: 0L psd frequency
[no] psd
208
Released
optional parameter with default value: 0L psd level
3HH-08079-DDAA-TCZZA
01
7 xDSL Configuration Commands
Parameter
Type
Description
- unit: -10*dBm/Hz - range: [0...1275]
3HH-08079-DDAA-TCZZA 01
Released
209
7 xDSL Configuration Commands
7.24 xDSL RTX Profile Configuration Command Command Description This command allows the operator to configure the RTX profile which can be used to configure the modem for a physical Line RTX downstream/upstream parameters will have effect, only when the retransmission feature in downstream/upstream is not "forbidden" on the line
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure xdsl ( no rtx-profile (index) ) | ( rtx-profile (index) name [ version ] [ no rtx-mode-dn | rtx-mode-dn ] [ no rtx-mode-up | rtx-mode-up ] [ no min-exp-thrpt-dn | min-exp-thrpt-dn ] [ no min-exp-thrpt-up | min-exp-thrpt-up ] [ no plan-exp-thrpt-dn | plan-exp-thrpt-dn ] [ no plan-exp-thrpt-up | plan-exp-thrpt-up ] [ no max-exp-thrpt-dn | max-exp-thrpt-dn ] [ no max-exp-thrpt-up | max-exp-thrpt-up ] [ no max-net-rate-dn | max-net-rate-dn ] [ no max-net-rate-up | max-net-rate-up ] [ no min-delay-dn | min-delay-dn ] [ no min-delay-up | min-delay-up ] [ no max-delay-dn | max-delay-dn ] [ no max-delay-up | max-delay-up ] [ no min-inp-shine-dn | min-inp-shine-dn ] [ no min-inp-shine-up | min-inp-shine-up ] [ no min-inp-rein-dn | min-inp-rein-dn ] [ no min-inp-rein-up | min-inp-rein-up ] [ no int-arr-time-dn | int-arr-time-dn ] [ no int-arr-time-up | int-arr-time-up ] [ no shine-ratio-dn | shine-ratio-dn ] [ no shine-ratio-up | shine-ratio-up ] [ no leftr-thresh-dn | leftr-thresh-dn ] [ no leftr-thresh-up | leftr-thresh-up ] [ [ no ] active ] [ no modification | modification ] )
Command Parameters Table 7.24-1 "xDSL RTX Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - a profile index value - range: [1...128]
index of the profile
Table 7.24-2 "xDSL RTX Profile Configuration Command" Command Parameters Parameter
Type
Description
name
Parameter type: Format: - a profile name - range: [a-zA-Z0-9-_.]
mandatory parameter profile name
210
Released
3HH-08079-DDAA-TCZZA
01
7 xDSL Configuration Commands
Parameter version [no] rtx-mode-dn
[no] rtx-mode-up
[no] min-exp-thrpt-dn
[no] min-exp-thrpt-up
[no] plan-exp-thrpt-dn
[no] plan-exp-thrpt-up
[no] max-exp-thrpt-dn
[no] max-exp-thrpt-up
[no] max-net-rate-dn
3HH-08079-DDAA-TCZZA 01
Type
Description
- length: 1 configure xdsl ( no vect-profile (index) ) | ( vect-profile (index) name [ version ] [ no fext-cancel-up | fext-cancel-up ] [ no fext-cancel-dn | fext-cancel-dn ] [ [ no ] dis-gvect-cpe ] [ [ no ] gvec-friendly-cpe ] [ [ no ] legacy-cpe ] [ no band-control-up | band-control-up ] [ no band-control-dn | band-control-dn ] [ no vect-leav-thresh | vect-leav-thresh ] [ [ no ] active ] [ no modification | modification ] )
Command Parameters Table 7.25-1 "xDSL Vectoring Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - a profile index value - range: [1...25]
index of the profile
Table 7.25-2 "xDSL Vectoring Profile Configuration Command" Command Parameters Parameter
Type
Description
name
Parameter type: Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1 configure system sync-if-timing ssmout-synce (index) [ [ no ] ssmout-enable ]
Command Parameters Table 12.19-1 "SSMOut Configuration Command for synce ports" Resource Parameters Resource Identifier
Type
(index)
Format: xdsl port supporting synce clock ( ntio-1 : sfp : source | ntio-1 : xfp : | ntio-2 : sfp : | ntio-2 : xfp : | nt-a : sfp : | nt-a : xfp : | nt-b : sfp : | nt-b : xfp : | nt : sfp : | none ) Possible values: - ntio-1 : an nt applique slot in a single or multiple-ntio-shelf - ntio-2 : an nt applique slot in a multiple-ntio-shelf - nt-a : nt-a slot - nt-b : nt-b slot - nt : active nt slot - none : no port Possible values: - nosfp : no SFP/XFP port - sfp : SFP port - xfp : XFP port Field type - host SFP faceplate number
324
Released
Description
3HH-08079-DDAA-TCZZA
01
12 System Configuration Commands
Table 12.19-2 "SSMOut Configuration Command for synce ports" Command Parameters Parameter
Type
Description
[no] ssmout-enable
Parameter type: boolean
optional parameter enable ssm-out for synce port
3HH-08079-DDAA-TCZZA 01
Released
325
12 System Configuration Commands
12.20 SSMOut Configuration Command for XDSL ports Command Description This command allows the operator to enable or disable SSMout for xDSL ports. This command is applicable to NT's supporting enhanced clock management
User Level The command can be accessed by operators with all privileges, and executed by operators with all privileges.
Command Syntax The command has the following syntax: > configure system sync-if-timing ( no ssmout-ltport (index) ) | ( ssmout-ltport (index) [ [ no ] ssmout-enable ] )
Command Parameters Table 12.20-1 "SSMOut Configuration Command for XDSL ports" Resource Parameters Resource Identifier
Type
(index)
Format: ( / / : : | / / | / / / / | / / / / voip | / / / / ) Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type
326
Released
Description xdsl port supporting synce clock / source / / / / /
3HH-08079-DDAA-TCZZA
01
12 System Configuration Commands
Resource Identifier
Type
Description
- the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier
Table 12.20-2 "SSMOut Configuration Command for XDSL ports" Command Parameters Parameter
Type
Description
[no] ssmout-enable
Parameter type: boolean
optional parameter enable ssm-out for dsl port
3HH-08079-DDAA-TCZZA 01
Released
327
12 System Configuration Commands
12.21 T4 D-PLL Configuration Command Command Description This command allows the operator to configure the T4 D-PLL parameters. Note: In standard mode, T4 parameters are optional. The possible combinations are: 1. t4mode = standard, t4-prio-ref1 = assysclk, t4-prio-ref2 = none 2. t4mode = synce-transfer, t4-prio-ref1 = synce-1, t4-prio-ref2 = synce-2 3. t4mode = synce-split, t4-prio-ref1 = synce-1, t4-prio-ref2 = synce-2 For t4-jitter-bw, the proposed values are 18, 35, 70, 560
User Level The command can be accessed by operators with all privileges, and executed by operators with all privileges.
Command Syntax The command has the following syntax: > configure system sync-if-timing t4-out-config [ no t4-mode | t4-mode ] [ no t4-damping-factor | t4-damping-factor ] [ no t4-jitter-bw | t4-jitter-bw ] [ no t4-prio-ref1 | t4-prio-ref1 ] [ no t4-prio-ref2 | t4-prio-ref2 ]
Command Parameters Table 12.21-2 "T4 D-PLL Configuration Command" Command Parameters Parameter
Type
Description
[no] t4-mode
Parameter type: Format: ( standard | synce-transfer | synce-split ) Possible values: - standard : standard configuration - synce-transfer : synce-transfer t4 mode - synce-split : synce-split t4 mode Parameter type: Format: ( factor-1.2-db | factor-2.5-db | factor-5.0-db | factor-10.0-db | factor-20.0-db ) Possible values: - factor-1.2-db : 1.2 db damping factor - factor-2.5-db : 2.5 db damping factor - factor-5.0-db : 5.0 db damping factor - factor-10.0-db : 10.0 db damping factor - factor-20.0-db : 20.0 db damping factor Parameter type: Format:
optional parameter with default value: "standard" standard t4 mode
[no] t4-damping-factor
[no] t4-jitter-bw
328
Released
optional parameter with default value: "factor-5.0-db" t4 d-pll damping factor
optional parameter with default value: 18
3HH-08079-DDAA-TCZZA
01
12 System Configuration Commands
Parameter [no] t4-prio-ref1
[no] t4-prio-ref2
3HH-08079-DDAA-TCZZA 01
Type
Description
- jitter bandwidth - range: [0...1024] Parameter type: Format: ( none | local | synce-1 | synce-2 | assysclk ) Possible values: - none : no clock is specified for this priority - local : holdover specified (always enable last priority) - synce-1 : 1st SyncE clock is specified for this priority - synce-2 : 2nd SyncE clock is specified for this priority - assysclk : synce-split config Parameter type: Format: ( none | local | synce-1 | synce-2 | assysclk ) Possible values: - none : no clock is specified for this priority - local : holdover specified (always enable last priority) - synce-1 : 1st SyncE clock is specified for this priority - synce-2 : 2nd SyncE clock is specified for this priority - assysclk : synce-split config
t4 jitter bandwidth filter optional parameter with default value: "none" synce reference 1
optional parameter with default value: "none" synce reference 2
Released
329
13- Security Configuration Commands
13.1 Security Configuration Command Tree 13.2 Security Banner Configuration Commmand 13.3 Operator Configuration Command 13.4 Profile Configuration Command 13.5 Default Profile Configuration Command 13.6 SNMP View Configuration Command 13.7 Security SNMP Community Configuration Command 13.8 Security SNMPv3 Group Configuration Command 13.9 Security SNMPv3 User Configuration Command 13.10 Security SNMPv3 User-Group Configuration Command 13.11 SNMP Notify View Configuration Command 13.12 Security SNMP Notification Profile Configuration Command 13.13 Security SNMP Notification Profile Filter Configuration Command 13.14 Security SNMP Element Manager Configuration Command 13.15 Security RADIUS Client Configuration Command 13.16 Security RADIUS Authentication Server Configuration Command 13.17 Security RADIUS Accounting Server Configuration Command 13.18 Security RADIUS Dynamic Authorization Client Configuration Command 13.19 Security RADIUS Policy Configuration Command 13.20 Security RADIUS Server Configuration Command 13.21 Security Domain Configuration Command 13.22 Security Connection Profile Configuration Command 13.23 Security Connection Policy Configuration Command 13.24 Security 802.1x PAE System Configuration Command 13.25 Security 802.1x Port Authentication Configuration Command 13.26 Security 802.1x Extension, Port Authentication Configuration Command 13.27 Security 802.1x Port Configuration Command 13.28 Security Password Policy Configuration Commmand 13.29 File Transfer Configure Command 13.30 file Transfer server Configure Commands 13.31 PM File Upload Configure Command 13.32 PM File Upload Configure Command 13.33 Lawful Intercept Split Management Configuration Command 13.34 MAC Filter Configuration Command
330
Released
13-331 13-336 13-337 13-339 13-346 13-352 13-354 13-356 13-359 13-361 13-363 13-365 13-367 13-369 13-371 13-372 13-374 13-376 13-378 13-380 13-382 13-384 13-385 13-386 13-387 13-389 13-391 13-393 13-395 13-396 13-397 13-398 13-400 13-401
3HH-08079-DDAA-TCZZA
01
13 Security Configuration Commands
13.1 Security Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "Security Configuration Commands".
Command Tree ----configure ----system ----security - [no] login-banner - [no] welcome-banner ----[no] operator - (name) - profile - password - [no] prompt - [no] description - [no] more ----[no] profile - (name) - [no] prompt - [no] password-timeout - [no] terminal-timeout - [no] slot-numbering - [no] description - [no] aaa - [no] atm - [no] alarm - [no] dhcp - [no] equipment - [no] igmp - [no] ip - [no] pppoe - [no] qos - [no] software-mngt - [no] transport - [no] vlan - [no] xdsl - [no] sip - [no] megaco - [no] lacp - [no] mstp - [no] security - [no] service - [no] debug - [no] debug-mirror - [no] filter - [no] link - [no] log - [no] oam - [no] liadmin
3HH-08079-DDAA-TCZZA 01
Released
331
13 Security Configuration Commands
- [no] liuser ----default-profile - [no] prompt - [no] password-timeout - [no] terminal-timeout - [no] slot-numbering - [no] description - [no] aaa - [no] atm - [no] alarm - [no] dhcp - [no] equipment - [no] igmp - [no] ip - [no] pppoe - [no] qos - [no] software-mngt - [no] transport - [no] vlan - [no] xdsl - [no] sip - [no] megaco - [no] lacp - [no] mstp - [no] security - [no] service - [no] debug - [no] debug-mirror - [no] filter - [no] link - [no] log - [no] oam - [no] liadmin - [no] liuser ----snmp ----[no] view - (notify-view) - subtree - type ----[no] community - (name) - host-address - [no] context - [no] privilege - [no] read-view - [no] write-view - [no] notify-view ----[no] group - (name) - security-level - context - [no] read-view - [no] write-view - [no] notify-view ----[no] user - (name) - [no] authentication - [no] privacy - [no] public
332
Released
3HH-08079-DDAA-TCZZA
01
13 Security Configuration Commands
----[no] map-user-group - (name) - group-name ----[no] notify-view - (notify-view) - subtree - type ----[no] notify-profile - (name) - snmp-version ----[no] filter - notify-view ----[no] manager - (name) - destination - notify-profile - [no] nt - [no] shub - [no] epon - [no] xvps1 - [no] xvps2 - [no] xvps3 - [no] xvps4 - [no] xvps5 - [no] xvps6 - [no] xvps7 - [no] xvps8 ----radius - [no] auth-super-user - [no] operator-policy - [no] aut-s-unreach-act ----[no] auth-server - (name) - router-instance - ip-address - [no] port - secret - [no] retry-limit - [no] timeout-limit - [no] admin-down - [no] dead-interval ----[no] acc-server - (name) - router-instance - ip-address - [no] port - secret - [no] retry-limit - [no] timeout-limit - [no] admin-down - [no] dead-interval ----[no] dyn-auth-client - (name) - router-instance - ip-address - secret - [no] admin-down ----[no] policy - (name)
3HH-08079-DDAA-TCZZA 01
Released
333
13 Security Configuration Commands
- nas-id - nas-ip-address - [no] keep-domain-name - [no] disable-accnt-msg - [no] acc-interval - [no] disable-eap ----[no] servers - (index) - auth-server - auth-router-inst - [no] acc-server - [no] acc-router-inst - priority ----[no] domain - (name) - [no] vlan-id - [no] primary-dns - [no] second-dns - [no] primary-nbns - [no] second-nbns - [no] sess-timeout - [no] qos-policy - authenticator - [no] admin-down ----[no] conn-profile - (name) - version - [no] reject-no-domain - [no] reject-inv-domain - domain-name ----[no] conn-policy - conn-profile-name ----pae - [no] port-access ----authenticator - (port) - [no] controlled-port - [no] quiet-period - [no] tx-period - [no] supp-timeout - [no] server-timeout - [no] max-req - [no] re-auth-enabled - [no] re-auth-period ----ext-authenticator - (port) - [no] authentication - [no] init-authreq-off - [no] handshake - [no] handshake-period ----port - (port) - [no] initialize ----password - min-length - min-num-numeric-char - min-num-special-char - [no] mixed-case ----filetransfer
334
Released
3HH-08079-DDAA-TCZZA
01
13 Security Configuration Commands
- [no] protocol ----[no] server - (serverid) - user-name - password ----pmfile ----[no] upload - (upload-index) - pri-server-addr - upload-path - upload-username - upload-password - interval-type - [no] auto-upload - [no] retry-num - [no] max-delay ----li - [no] separate ----peripheral-mgnt ----mac-filter - (index-num) - [no] filter
3HH-08079-DDAA-TCZZA 01
Released
335
13 Security Configuration Commands
13.2 Security Banner Configuration Commmand Command Description This command allows the operator to configure the login banner and the welcome banner. There is a limit to the number of characters that can be entered in a single CLI command. For lengthy banners, Alcatel-Lucent recommends that the operator enter separate commands to configure the login banner and the welcome banner.
User Level The command can be accessed by operators with security privileges, and executed by operators with security privileges.
Command Syntax The command has the following syntax: > configure system security [ no login-banner | login-banner ] [ no welcome-banner | welcome-banner ]
Command Parameters Table 13.2-2 "Security Banner Configuration Commmand" Command Parameters Parameter
Type
Description
[no] login-banner
Parameter type: Format: - a banner to be shown to the operator - length: x configure system security radius [ [ no ] auth-super-user ] [ no operator-policy | operator-policy ] [ no aut-s-unreach-act | aut-s-unreach-act ]
Command Parameters Table 13.15-2 "Security RADIUS Client Configuration Command" Command Parameters Parameter
Type
Description
[no] auth-super-user
Parameter type: boolean
[no] operator-policy
Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associate - name : enter profile name to be associated Field type - name of the RADIUS policy - length: 1 configure qos profiles ( no shaper (name) ) | ( shaper (name) committed-info-rate committed-burst-size [ no excess-info-rate | excess-info-rate ] [ no type | type ] [ no autoshape | autoshape ] )
Command Parameters Table 18.27-1 "QoS Shaper Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(name)
Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1 configure qos dsl-port (index) queue (queue) [ queue-profile ] Obsolete command, replaced by configure qos interface (index) queue.
Command Parameters Table 18.33-1 "QoS LIM Queue Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: physical port of a subscriber / / / interface. Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Format: queue in scope of 1 dsl link on a - output dsl/gpon/epon port queue number line-interface-module - range: [0...7,255]
(queue)
Description
Table 18.33-2 "QoS LIM Queue Configuration Command" Command Parameters Parameter
Type
Description
queue-profile
Parameter type: Format:
optional parameter name of the queue profile
3HH-08079-DDAA-TCZZA 01
Released
485
18 QoS Configuration Commands
Parameter
Type
Description
( none | name : ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help.
486
Released
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
18.34 QoS ShdSL Link Configuration Command Command Description Obsolete command, replaced by configure qos interface (index). This command allows the operator to configure Shdsl links. For each Shdsl link the operator can apply scheduling and CAC settings. A scheduler profile is used to configure egress scheduler settings for each egress Shdsl interface. A CAC profile is used to configure CAC settings for each Shdsl interface. The Shdsl link table can be configured on the SMLT-H , SMLT-J and NSLT-A units.
User Level The command can be accessed by operators with qos privileges, and executed by operators with qos privileges.
Command Syntax The command has the following syntax: > configure qos shdsl-port (index) [ scheduler-profile ] [ cac-profile ] Obsolete command, replaced by configure qos interface (index).
Command Parameters Table 18.34-1 "QoS ShdSL Link Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: physical port of a shdsl link / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number
Description
Table 18.34-2 "QoS ShdSL Link Configuration Command" Command Parameters Parameter
Type
Description
scheduler-profile
Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associate
optional parameter name of scheduler profile to be mapped on this dsl link
3HH-08079-DDAA-TCZZA 01
Released
487
18 QoS Configuration Commands
Parameter
Type
cac-profile
488
Description
- name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: optional parameter Format: name of cac profile to be mapped ( name : on this dsl link | none ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help.
Released
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
18.35 QoS LIM Queue (SHDSL) Configuration Command Command Description Obsolete command, replaced by configure qos interface (index) queue. This command allows the operator to configure a QoS Line Card queue. On the L3 line cards, each SHDSL interface supports four downstream buffers, which can be configured independently using buffer acceptance control (BAC) profiles. The operator can configure downstream buffers, such that the total buffer pool is oversubscribed. However, this is not recommended because this allows QoS un-aware packet discard. If the total downstream buffer pool is over-subscribed, the system logs a warning message. Proceed with care, as this allows QoS un-aware packet discard in extreme traffic conditions.
User Level The command can be accessed by operators with qos privileges, and executed by operators with qos privileges.
Command Syntax The command has the following syntax: > configure qos shdsl-port (index) queue (queue) [ queue-profile ] Obsolete command, replaced by configure qos interface (index) queue.
Command Parameters Table 18.35-1 "QoS LIM Queue (SHDSL) Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: physical port of a shdsl link / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Format: queue in scope of 1 dsl link on a - output dsl/gpon/epon port queue number line-interface-module - range: [0...7,255]
(queue)
Description
Table 18.35-2 "QoS LIM Queue (SHDSL) Configuration Command" Command Parameters
3HH-08079-DDAA-TCZZA 01
Released
489
18 QoS Configuration Commands
Parameter
Type
queue-profile
Parameter type: optional parameter Format: name of the queue profile ( none | name : ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help.
490
Released
Description
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
18.36 QoS Interface Configuration Command Command Description This command allows the operator to configure QoS settings on a user-port Interface. A user-port Interface can be a DSL-link, an Shdsl-link, an Ethernet Line, a Link Aggregation Group or a pon, ont or uni interface. For each Interface the operator can apply scheduling and CAC settings. A scheduler node profile is used to configure egress scheduler settings for each egress Interface. A CAC profile is used to configure CAC settings for each Interface.
User Level The command can be accessed by operators with qos privileges, and executed by operators with qos privileges.
Command Syntax The command has the following syntax: > configure qos interface (index) [ no scheduler-node | scheduler-node ] [ no cac-profile | cac-profile ] [ [ no ] ds-queue-sharing ] [ [ no ] us-queue-sharing ] [ no ds-num-queue | ds-num-queue ] [ no us-num-queue | us-num-queue ] [ [ no ] queue-stats-on ] [ [ no ] autoschedule ] [ oper-weight ] [ oper-rate ]
Command Parameters Table 18.36-1 "QoS Interface Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: physical port or la-group of a ( / / / user-port Interface | / / / / / / | pon : / / / | ont : / / / / | / / / / / voip | ellid : / / / / / | epon : / / / | eont : / / / / ) Possible values: - pon : pon - ont : ont
3HH-08079-DDAA-TCZZA 01
Description
Released
491
18 QoS Configuration Commands
Resource Identifier
Type
Description
- epon : epon - eont : eont - ellid : ellid Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - the PON identifier Field type - the ONT identifier Field type - the LLID identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier
Table 18.36-2 "QoS Interface Configuration Command" Command Parameters Parameter
Type
Description
[no] scheduler-node
optional parameter with default value: "none" the name of the scheduler-node profile to be mapped on this user-port Interface
[no] ds-queue-sharing
Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: Format: ( name : | none ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: boolean
[no] us-queue-sharing
Parameter type: boolean
[no] ds-num-queue
Parameter type: Format: ( not-applicable | ) Possible values:
[no] cac-profile
492
Released
optional parameter with default value: "none" the name of the cac profile to be mapped on this user-port Interface
optional parameter enable downstream queue sharing optional parameter enable upstream queue sharing optional parameter with default value: 4 number of downstream queues per uni
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
Parameter
[no] us-num-queue
[no] queue-stats-on [no] autoschedule oper-weight
oper-rate
3HH-08079-DDAA-TCZZA 01
Type - not-applicable : not applicable Field type - number of queues per uni - range: [4,8] Parameter type: Format: ( not-applicable | ) Possible values: - not-applicable : not applicable Field type - number of queues per uni - range: [4,8] Parameter type: boolean Parameter type: boolean Parameter type: Format: - relative weight - range: [0...127] Parameter type: Format: - excessive information rate of a shaper - unit: kbps - range: [0...2147483647]
Description
optional parameter with default value: 8 number of upstream queues per uni
optional parameter enable queue stats collection for ont uni optional parameter optional parameter operational weight of the ONT or UNI scheduler optional parameter Operational rate limit when autoShape enabled for ONT or UNI
Released
493
18 QoS Configuration Commands
18.37 QoS Interface Queue Configuration Command Command Description This command allows the operator to configure a QoS Line Card queue. On the L3 line cards, each user-port (DSL-Link, Shdsl-link or Ethernet Line or LA-Group) supports four downstream buffers, which can be configured independently using buffer acceptance control (BAC) profiles. The operator can configure downstream buffers, such that the total buffer pool is oversubscribed. Please take note that this allows QoS un-aware packet discard under extreme traffic conditions. When the total downstream buffer pool is over-subscribed, the system logs a warning message. Queue profile none only for epon,queue profile must have a name for other boards.
User Level The command can be accessed by operators with qos privileges, and executed by operators with qos privileges.
Command Syntax The command has the following syntax: > configure qos interface (index) queue (queue) [ priority ] [ weight ] [ oper-weight ] [ queue-profile ] [ shaper-profile ]
Command Parameters Table 18.37-1 "QoS Interface Queue Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: physical port or la-group of a ( / / / user-port Interface | / / / / / / | pon : / / / | ont : / / / / | / / / / / voip | ellid : / / / / / | epon : / / / | eont : / / /
494
Released
Description
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
Resource Identifier
(queue)
Type
Description
/ ) Possible values: - pon : pon - ont : ont - epon : epon - eont : eont - ellid : ellid Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - the PON identifier Field type - the ONT identifier Field type - the LLID identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Format: - output dsl/gpon/epon port queue number - range: [0...7,255]
queue in scope of 1 user-port Interface on a line-interface-module
Table 18.37-2 "QoS Interface Queue Configuration Command" Command Parameters Parameter
Type
Description
priority
Parameter type: Format: - relative priority - range: [1...8] Parameter type: Format: - relative weight - range: [0...127] Parameter type: Format: - relative weight - range: [0...127] Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type:
optional parameter relative priority of the scheduler
weight
oper-weight
queue-profile
shaper-profile
3HH-08079-DDAA-TCZZA 01
optional parameter relative weight of the scheduler optional parameter relative weight of the scheduler operational value optional parameter name of the queue profile
optional parameter
Released
495
18 QoS Configuration Commands
Parameter
Type
Description
Format: name of the shaper profile ( none | name : ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help.
496
Released
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
18.38 QoS Interface Upstream Queue Configuration Command Command Description This command allows the operator to configure the upstream queues on the LIM with queue profiles The operator can configure the upstream queue priority and upstream queue weight along with an option to enable or disable the bandwidth sharing.
User Level The command can be accessed by operators with qos privileges, and executed by operators with qos privileges.
Command Syntax The command has the following syntax: > configure qos interface (index) upstream-queue (queue) [ no priority | priority ] [ no weight | weight ] [ no bandwidth-profile | bandwidth-profile ] [ no bandwidth-sharing | bandwidth-sharing ] [ no queue-profile | queue-profile ]
Command Parameters Table 18.38-1 "QoS Interface Upstream Queue Configuration Command" Resource Parameters Resource Identifier
Type
(index)
Format: physical port or la-group of a ( / / / user-port Interface | / / / / / / | pon : / / / | ont : / / / / | / / / / / voip | ellid : / / / / / | epon : / / / | eont : / / / / ) Possible values: - pon : pon
3HH-08079-DDAA-TCZZA 01
Description
Released
497
18 QoS Configuration Commands
Resource Identifier
Type
Description
- ont : ont - epon : epon - eont : eont - ellid : ellid Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - the PON identifier Field type - the ONT identifier Field type - the LLID identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Format: - output dsl/gpon/epon port queue number - range: [0...7,255]
(queue)
queue in scope of 1 user-port Interface on a line-interface-module or ont uni, value 255 indicates the configuration is on the interface not on the queue
Table 18.38-2 "QoS Interface Upstream Queue Configuration Command" Command Parameters Parameter
Type
Description
[no] priority
Parameter type: Format: - relative priority - range: [1...8] Parameter type: Format: - relative weight - range: [0...127] Parameter type: Format: ( name : | none ) Possible values: - none : no profile name to associate - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: Format: ( no-sharing | uni-sharing | ont-sharing )
optional parameter with default value: 1 relative priority
[no] weight
[no] bandwidth-profile
[no] bandwidth-sharing
498
Released
optional parameter with default value: 10 relative weight optional parameter with default value: "none" name of the bandwidth profile
optional parameter with default value: "no-sharing" enable or disable shaper sharing
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
Parameter
[no] queue-profile
3HH-08079-DDAA-TCZZA 01
Type
Description
Possible values: - no-sharing : disable shaper sharing - uni-sharing : enable BW or TCONT sharing on a single UNI - ont-sharing : enable BW or TCONT sharing on across UNIs of an ONT Parameter type: optional parameter with default Format: value: "none" ( none name of the queue profile | name : ) Possible values: - none : no profile name to associated - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help.
Released
499
18 QoS Configuration Commands
18.39 QoS Line Control Packets Rate Limit Configuration Command Command Description This command allows the operator to configure police rate and burst per protocl.
User Level The command can be accessed by operators with qos privileges, and executed by operators with qos privileges.
Command Syntax The command has the following syntax: > configure qos ( no ctrl-pkt-policer (protocol-id) ) | ( ctrl-pkt-policer (protocol-id) [ no sustained-rate | sustained-rate ] [ no burst-size | burst-size ] )
Command Parameters Table 18.39-1 "QoS Line Control Packets Rate Limit Configuration Command" Resource Parameters Resource Identifier
Type
Description
(protocol-id)
Format: ( arp | igmp | dhcpv4 | dhcpv6 | icmpv6 | cfm | pppox ) Possible values: - arp : arp - igmp : igmp - dhcpv4 : dhcpv4 - dhcpv6 : dhcpv6 - icmpv6 : icmpv6 - cfm : cfm - pppox : pppox
protocol id for arp,igmp,dhcpv4,dhcpv6,icmpv6,cfm,pp
Table 18.39-2 "QoS Line Control Packets Rate Limit Configuration Command" Command Parameters Parameter
Type
Description
[no] sustained-rate
Parameter type: Format: - the police rate of inc user pkts in pps - range: [1...64]
optional parameter with default value: 15 police the user incoming packets on all pvc's for the protocol of a
500
Released
3HH-08079-DDAA-TCZZA
01
18 QoS Configuration Commands
Parameter
Type
Description
[no] burst-size
Parameter type: Format: - the burst size - range: [1...128]
dsl line. optional parameter with default value: 10 police the user incoming packets on all pvc's for the protocol of a dsl line.
3HH-08079-DDAA-TCZZA 01
Released
501
19- VLAN Configuration Commands
19.1 VLAN Configuration Command Tree 19.2 VLAN General Configuration Command 19.3 Virtual MAC Configuration Command 19.4 VLAN Configuration Command 19.5 VLAN Filtering Database Configuration Command 19.6 VLAN Port Filtering Database Configuration Command 19.7 VLAN Protocol-based Configuration Command 19.8 Vlan Pbit Traffic Counter Configuration Command 19.9 Vlan Priority Regeneration Profile Configuration Command
502
Released
19-503 19-505 19-507 19-508 19-514 19-516 19-518 19-521 19-523
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
19.1 VLAN Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "VLAN Configuration Commands".
Command Tree ----configure ----vlan - [no] broadcast-frames - priority-policy X pvid-usage ----vmac-address-format - host-id ----[no] id - (vlanid) - [no] name - mode - [no] sntp-proxy - [no] priority - [no] vmac-translation - [no] vmac-dnstr-filter - [no] vmac-not-in-opt61 - [no] broadcast-frames - [no] protocol-filter X [no] pppoe-relay - [no] pppoe-relay-tag - [no] dhcp-opt-82 X [no] circuit-id - [no] circuit-id-dhcp X [no] remote-id - [no] remote-id-dhcp - [no] dhcp-linerate - [no] pppoe-linerate - [no] dhcpv6-linerate - [no] circuit-id-pppoe - [no] remote-id-pppoe - [no] secure-forwarding - [no] aging-time - [no] l2cp-transparent - [no] dhcpv6-itf-id - [no] dhcpv6-remote-id - [no] dhcpv6-trst-port - [no] enterprise-number - [no] icmpv6-sec-fltr - [no] in-qos-prof-name - [no] ipv4-mcast-ctrl - [no] ipv6-mcast-ctrl - [no] mac-mcast-ctrl - [no] dis-proto-rip - [no] proto-ntp - [no] dis-ip-antispoof
3HH-08079-DDAA-TCZZA 01
Released
503
19 VLAN Configuration Commands
- [no] unknown-unicast ----[no] unicast-mac - (unicast-mac) - vlan-id - forward-port ----[no] vlan-port - (port) - unicast-mac ----[no] port-protocol - (port) - protocol-group - vlan-id - priority ----pbit-statistics ----[no] port - (vlan-port) - min-dot1p - max-dot1p ----[no] priority-regen - (profile-idx) - profile-name - [no] pbit0 - [no] pbit1 - [no] pbit2 - [no] pbit3 - [no] pbit4 - [no] pbit5 - [no] pbit6 - [no] pbit7
504
Released
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
19.2 VLAN General Configuration Command Command Description This command allows the operator to specify VLAN parameters that are globally applicable to VLANs: - broadcast-frames : applies to VLANs of type residential bridge.when configured,broadcasting of frames is configurable on a per vlan basis, when the parameter is configured as "no broadcast-frames", downstream broadcast is disabled globally for all vlans. - priority-policy : applies to VLANs of type residential bridge, cross-connect and QoS-aware.Indicates if the priority of upstream frames is selected from the vlan (pvid) or port-default.This configuration is only applicable for untagged user traffic. - pvid-usage : when configured as "c-vlantranslation", the pvid (port default vlan) behaviour will become very specific. In this configuration case, the pvid is used to do c-vlantranslation for user upstream traffic which is tagged with vlan 7. Other tagged user traffic will be discarded. Also untagged user traffic will be discared: it will not be tagged with the pvid. If downstream traffic must be tagged,c-vlantranslation will also be done :the vlantag (equal to pvid value)will be translated to vlan 7.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan [ [ no ] broadcast-frames ] priority-policy [ pvid-usage ]
Command Parameters Table 19.2-2 "VLAN General Configuration Command" Command Parameters Parameter
Type
Description
[no] broadcast-frames
Parameter type: boolean
priority-policy
Parameter type: Format: ( vlan-specific | port-default ) Possible values: - vlan-specific : the priority of the vlan - port-default : the default priority of the port Parameter type: Format: ( c-vlan-translation | standard ) Possible values:
optional parameter broadcasting of frames is configurable per vlan optional parameter specifies how to deal with ethernet priority of the upstream frames
pvid-usage
3HH-08079-DDAA-TCZZA 01
obsolete parameter that will be ignored multi-vlan service supports c-vlan translation
Released
505
19 VLAN Configuration Commands
Parameter
Type
Description
- c-vlan-translation : enable cvlan translation - standard : disable cvlan translation
506
Released
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
19.3 Virtual MAC Configuration Command Command Description This command allows the user to configure the format in which a virtual MAC address is defined.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan vmac-address-format [ host-id ]
Command Parameters Table 19.3-2 "Virtual MAC Configuration Command" Command Parameters Parameter
Type
host-id
Parameter type: optional parameter Format: Value of vMac unique host - A unique host Id within an EMAN connected to the same ID.Range 1...524287 for IP edges DSL/ETH vMAC range 1...65536 - range: [1...524287] for GPON vMAC
3HH-08079-DDAA-TCZZA 01
Description
Released
507
19 VLAN Configuration Commands
19.4 VLAN Configuration Command Command Description This command allows the operator to specify a VLAN and its attributes. The following combination is not allowed:pppoe-relay-tag=configurable, while circuit-id-pppoe and remote-id-pppoe are both disable or customer-id or physical-id. The circuit-id-pppoe and remote-id-pppoe take effect when the pppoe-relay-tag is configurable. The circuit-id-dhcp and remote-id-dhcp take effect when the dhcp-opt-82 is true. - broadcast-frames: applies to VLANs of type residential bridge.The configured value of this parameter has no meaning when broadcast-frames is not enabled at node level, meaning globally for all VLANs - priority: The selection of the vlan based priority can apply provided the prioritypolicy at node level is vlan-specific. - vmac-translation: this configuration value has no effect in case mac learning is disabled (mac-learn-off). - RIP will be enabled automatically by default during the creation of VLAN. The vlan numbering space is the concatenation of an Service Provider VLAN, say S-VLAN-ID, and a Customer VLAN, say C-VLAN-ID. Remark that the S-VLAN-ID is assumed to be unique. The VLAN-ID value "0" - which is not a valid VLAN-tag value- is used to indicate "not applicable". The value 4097 should not be used as a valid forwarding vlan. Following convention applies: - S-VLAN is identified as (S-VLAN-ID, C-VLAN-ID=0) - unstacked C-VLAN: - the S-VLAN is absent or not applicable - C-VLAN-ID > 0. A constraint exists for VLAN 1: it is reserved as the VLAN-unaware bridge. This VLAN is managed as any other VLAN (i.e. it can be created, modified, removed) but it must be a residential bridged VLAN. - stacked C-VLAN is identified as (S-VLAN-ID>1, C-VLAN-ID>1) - ipv6-mcast-ctrl: This parameter is used in the following cases: - on the NGLT-A GPON linecard, ipv6-mcast-ctrl parameter is used to allow or disallow upstream and downstream IPv6 multicast traffic - for all other linecards, in case no DHCPv6 protocol processing is performed on the linecard (i.e. secure-forwarding,dhcpv6-itf-id and dhcpv6-remote-id are all disabled), the ipv6-mcast-ctrl parameter is used to control upstream and downstream DHCPv6 multicast traffic
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan ( no id (vlanid) ) | ( id (vlanid) [ no name | name ] mode [ [ no ] sntp-proxy ] [ no priority | priority ] [ [ no ] vmac-translation ] [ [ no ] vmac-dnstr-filter ] [ [ no ] vmac-not-in-opt61 ] [ [ no ] broadcast-frames ] [ no protocol-filter | protocol-filter ] [ [ no ] pppoe-relay ] [ no pppoe-relay-tag | pppoe-relay-tag
508
Released
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
] [ [ no ] dhcp-opt-82 ] [ no circuit-id | circuit-id ] [ no circuit-id-dhcp | circuit-id-dhcp ] [ no remote-id | remote-id ] [ no remote-id-dhcp | remote-id-dhcp ] [ no dhcp-linerate | dhcp-linerate ] [ no pppoe-linerate | pppoe-linerate ] [ no dhcpv6-linerate | dhcpv6-linerate ] [ no circuit-id-pppoe | circuit-id-pppoe ] [ no remote-id-pppoe | remote-id-pppoe ] [ [ no ] secure-forwarding ] [ no aging-time | aging-time ] [ [ no ] l2cp-transparent ] [ no dhcpv6-itf-id | dhcpv6-itf-id ] [ no dhcpv6-remote-id | dhcpv6-remote-id ] [ no dhcpv6-trst-port | dhcpv6-trst-port ] [ no enterprise-number | enterprise-number ] [ [ no ] icmpv6-sec-fltr ] [ no in-qos-prof-name | in-qos-prof-name ] [ [ no ] ipv4-mcast-ctrl ] [ [ no ] ipv6-mcast-ctrl ] [ [ no ] mac-mcast-ctrl ] [ [ no ] dis-proto-rip ] [ [ no ] proto-ntp ] [ [ no ] dis-ip-antispoof ] [ [ no ] unknown-unicast ] )
Command Parameters Table 19.4-1 "VLAN Configuration Command" Resource Parameters Resource Identifier
Type
Description
(vlanid)
Format: ( | stacked : : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [2...4093] Field type - customer vlan identity - range: [0...4093,4096]
vlan id
Table 19.4-2 "VLAN Configuration Command" Command Parameters Parameter
Type
Description
[no] name
Parameter type: Format: - char string - length: x configure vlan ( no unicast-mac (unicast-mac) vlan-id ) | ( unicast-mac (unicast-mac) vlan-id forward-port )
Command Parameters Table 19.5-1 "VLAN Filtering Database Configuration Command" Resource Parameters Resource Identifier
Type
Description
(unicast-mac)
Format: - mac address (aa:bb:cc:a1:02:03) - length: 6 Parameter type: Format: ( | stacked : : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [2...4093] Field type - customer vlan identity - range: [0...4093,4096]
unicast mac address
vlan-id
network vlan id
Table 19.5-2 "VLAN Filtering Database Configuration Command" Command Parameters
514
Released
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
Parameter
Type
Description
forward-port
Parameter type: Format: ( / / : : | / / | / / / / | / / / / voip | / / / / ) Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier
mandatory parameter forward bridge port
3HH-08079-DDAA-TCZZA 01
/ / / / / /
Released
515
19 VLAN Configuration Commands
19.6 VLAN Port Filtering Database Configuration Command Command Description This command allows the operator to specify entries in the Layer 2 filtering database for a specific VLAN Port and unicast MAC address. This information is used by the bridge in determining how to propagate a received frame. This command will in time obsolete and replace the VLAN Filtering Database Configuration command. Already now, it must be used in case multiple vlan ports are configured on the same bridge port and attached to the same I-Bridge.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan ( no vlan-port (port) unicast-mac ) | ( vlan-port (port) unicast-mac )
Command Parameters Table 19.6-1 "VLAN Port Filtering Database Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: ( vlan-port : / / : : | vlan-port : / / : | vlan-port : / / : : stacked : : | vlan-port : / / : stacked : | vlan-port : / / / / : stacked : | vlan-port : / / / /
516
Released
Description vlan port / : / / : / : / / : / / :
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
Resource Identifier
unicast-mac
3HH-08079-DDAA-TCZZA 01
Type
Description
| vlan-port : / / / / voip stacked : : | vlan-port : / / / / voip | vlan-port : / / / : | vlan-port : / / / : stacked : : ) Possible values: - vlan-port : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id Parameter type: Format: - mac address (aa:bb:cc:a1:02:03) - length: 6
/ : / : / / / /
unicast mac address
Released
517
19 VLAN Configuration Commands
19.7 VLAN Protocol-based Configuration Command Command Description For protocol-based VLANs, this command allows the operator to specify how incoming traffic on a port is allocated to a particular VLAN and priority. For Ethernet frames, the mapping to either the PPPoE or IPoE protocol is: • protocol value 0x8863: PPPoE • protocol value 0x8864: PPPoE • protocol value 0x0800: IPoE • protocol value 0x0806: IPoE • protocol value 0x8035: IPoE For RFC_1042 frames the mapping to either PPPoE or IPoE protocol is: • protocol value 0x8863: PPPoE • protocol value 0x8864: PPPoE • protocol value 0x0800: IPoE • protocol value 0x0806: IPoE • protocol value 0x8035: IPoE priority: The selection of the priority for upstream frames, in case of a protocol based vlan, is not dependent on the configuration of the priority-policy configured at node level.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan ( no port-protocol (port) protocol-group ) | ( port-protocol (port) protocol-group vlan-id priority )
Command Parameters Table 19.7-1 "VLAN Protocol-based Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: ( / / : : | / / | / / / /
518
Released
Description identity of a port(e.g. atm PVC, / EFM port,...) / / /
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
Resource Identifier
protocol-group
Type
Description
| / / / / / voip | / / / / / ) Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Parameter type: protocol group Format: ( pppoe | ipoe | ipv6oe ) Possible values: - pppoe : PPPoE - ipoe : IPv4oE - ipv6oe : IPv6oE
Table 19.7-2 "VLAN Protocol-based Configuration Command" Command Parameters Parameter
Type
Description
vlan-id
Parameter type: Format: ( | stacked : : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [2...4093] Field type - customer vlan identity - range: [0...4093,4096] Parameter type:
mandatory parameter protocol group vlan id
priority
3HH-08079-DDAA-TCZZA 01
mandatory parameter
Released
519
19 VLAN Configuration Commands
Parameter
520
Released
Type
Description
Format: - priority of ethernet frames - range: [0...7]
priority of protocol based vlan
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
19.8 Vlan Pbit Traffic Counter Configuration Command Command Description This command allows the operator to configure the p-bit traffic counter.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan pbit-statistics ( no port (vlan-port) min-dot1p max-dot1p ) | ( port (vlan-port) min-dot1p max-dot1p )
Command Parameters Table 19.8-1 "Vlan Pbit Traffic Counter Configuration Command" Resource Parameters Resource Identifier
Type
(vlan-port)
Format: ( vlan-port : / / : : | vlan-port : / / : | vlan-port : / / : : stacked : : | vlan-port : / / : stacked : | vlan-port : / / / / : stacked : | vlan-port : / / / / | vlan-port : / / / / voip stacked : : | vlan-port : / / / / voip
3HH-08079-DDAA-TCZZA 01
Description vlan port / : / / : / : / / : / / : / : / :
Released
521
19 VLAN Configuration Commands
Resource Identifier
Description
| vlan-port : / / / : | vlan-port : / / / : stacked : : ) Possible values: - vlan-port : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id Parameter type: Format: - dot1p value range - range: [0...7] Parameter type: Format: - dot1p value range - range: [0...7]
min-dot1p
max-dot1p
522
Type
Released
/ / / /
min p-bit value
max p-bit value
3HH-08079-DDAA-TCZZA
01
19 VLAN Configuration Commands
19.9 Vlan Priority Regeneration Profile Configuration Command Command Description This command allows the operator to configure a priority regeneration profile. The priority regeneration profile table stores the pbit to TC mappings that can be used by a L2 Forwarder in the upstream and downstream directions. The first 10 profiles are hard-coded and may be neither edited nor deleted.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure vlan ( no priority-regen (profile-idx) ) | ( priority-regen (profile-idx) profile-name [ no pbit0 | pbit0 ] [ no pbit1 | pbit1 ] [ no pbit2 | pbit2 ] [ no pbit3 | pbit3 ] [ no pbit4 | pbit4 ] [ no pbit5 | pbit5 ] [ no pbit6 | pbit6 ] [ no pbit7 | pbit7 ] )
Command Parameters Table 19.9-1 "Vlan Priority Regeneration Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(profile-idx)
Format: - a unique index value for the priority regeneration profile - range: [11...32]
A unique profile index
Table 19.9-2 "Vlan Priority Regeneration Profile Configuration Command" Command Parameters Parameter
Type
Description
profile-name
Parameter type: Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1 configure bridge ( no port (port) ) | ( port (port) [ no pvid | pvid ] [ no default-priority | default-priority ] [ [ no ] mac-learn-off ] [ no max-unicast-mac | max-unicast-mac ] [ no accept-frame-type | accept-frame-type ] [ no qos-profile | qos-profile ] [ no prio-regen-prof | prio-regen-prof ] [ no max-committed-mac | max-committed-mac ] [ no mirror-mode | mirror-mode ] [ no mirror-vlan | mirror-vlan ] )
Command Parameters Table 20.3-1 "Bridge Port Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: ( / / : : | / / | / / / /
3HH-08079-DDAA-TCZZA 01
Description identity of a port(e.g. atm pvc, / efm port, eth port, la group ...) / / /
Released
529
20 Bridge Configuration Commands
Resource Identifier
Type
Description
| / / / / / voip | / / / / / ) Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier
Table 20.3-2 "Bridge Port Configuration Command" Command Parameters Parameter
Type
Description
[no] pvid
Parameter type: Format: ( | stacked : : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [2...4093] Field type - customer vlan identity - range: [0...4093,4096] Parameter type: Format: - priority of ethernet frames - range: [0...7] Parameter type: boolean
optional parameter with default value: "stacked : 0 : 4097" The parameter is not visible during creation. default vlan id for untagged frames
[no] default-priority
[no] mac-learn-off [no] max-unicast-mac
530
Released
Parameter type: Format: - number of unicast mac addresses - range: [1...8192]
optional parameter with default value: 0 priority to be set in upstream frames optional parameter disable self learning of mac address optional parameter with default value: "1" max uncommitted unicast mac addresses
3HH-08079-DDAA-TCZZA
01
20 Bridge Configuration Commands
Parameter
Type
Description
[no] accept-frame-type
Parameter type: Format: ( single-tagged | untagged | mixed-tagged ) Possible values: - single-tagged : admit only vlan tagged - untagged : admit only vlan untagged - mixed-tagged : admit vlan tagged and vlan untagged Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associate - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: Format: ( none | trusted-port | best-effort | cl-all-prio-3 | cl-all-prio-4 | background | be-cl-voice | be-cl-1d-voice | be-voice | l2-vpn-3 | l2-vpn-4 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 ) Possible values: - none : default value
obsolete parameter that will be ignored accept frame types
[no] qos-profile
[no] prio-regen-prof
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: "none" qos profile name
optional parameter with default value: "none" priority regeneration profile
Released
531
20 Bridge Configuration Commands
Parameter
Type
[no] max-committed-mac
[no] mirror-mode
[no] mirror-vlan
532
Released
Description
- trusted-port : trusted port - best-effort : best effort - cl-all-prio-3 : controlled load, all priority 3 traffic - cl-all-prio-4 : controlled load, all priority 4 traffic - background : background - be-cl-voice : best effort, controlled load, voice - be-cl-1d-voice : best effort, controlled load, 802.Id Annex G voice - be-voice : best effort voice - l2-vpn-3 : L2 VPN with 3 traffic classes - l2-vpn-4 : L2 VPN with 4 traffic classes - 11 : operator-defined profile - 12 : operator-defined profile - 13 : operator-defined profile - 14 : operator-defined profile - 15 : operator-defined profile - 16 : operator-defined profile - 17 : operator-defined profile - 18 : operator-defined profile - 19 : operator-defined profile - 20 : operator-defined profile - 21 : operator-defined profile - 22 : operator-defined profile - 23 : operator-defined profile - 24 : operator-defined profile - 25 : operator-defined profile - 26 : operator-defined profile - 27 : operator-defined profile - 28 : operator-defined profile - 29 : operator-defined profile - 30 : operator-defined profile - 31 : operator-defined profile - 32 : operator-defined profile Parameter type: optional parameter with default Format: value: "65535" - number of unicast mac addresses max committed unicast mac - range: [0...128,65535] addresses. 65535 means the committed value is the same as max-unicast-mac Parameter type: optional parameter with default Format: value: "disable" ( disable flow mirroring mode of the | overwrite-outer-vlan ) bridge port Possible values: - disable : disable mirror vlan tag - overwrite-outer-vlan : overwrite outer vlan tag with mirror vlan tag Parameter type: optional parameter with default Format: value: 0 - mirroring vlan id vlan-id to be inserted into - range: [0...4093] mirrored packets. This configuration value has no effect in case mirroring mode of the bridgeport is disabled (mirror-mode).
3HH-08079-DDAA-TCZZA
01
20 Bridge Configuration Commands
20.4 Bridge Port to VLAN Association Configuration Command Command Description This command allows the operator to associate a VLAN to a bridge port and to define VLAN attributes on this port. The parameters that allow to configure the priority bits (prior-best-effort till prior-nw-ctrl) only apply in case of a qos-aware VLAN.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure bridge port (port) ( no vlan-id (index) ) | ( vlan-id (index) [ (old-tag) ] [ no tag | tag ] [ no network-vlan | network-vlan ] [ no vlan-scope | vlan-scope ] [ no qos | qos ] [ no qos-profile | qos-profile ] [ [ no ] prior-best-effort ] [ [ no ] prior-background ] [ [ no ] prior-spare ] [ [ no ] prior-exc-effort ] [ [ no ] prior-ctrl-load ] [ [ no ] prior-less-100ms ] [ [ no ] prior-less-10ms ] [ [ no ] prior-nw-ctrl ] [ no in-qos-prof-name | in-qos-prof-name ] [ no max-up-qos-policy | max-up-qos-policy ] [ no max-ip-antispoof | max-ip-antispoof ] [ no max-unicast-mac | max-unicast-mac ] )
Command Parameters Table 20.4-1 "Bridge Port to VLAN Association Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: ( / / : : | / / | / / / / | / / / / voip | / / / / ) Field type - the rack number Field type - the shelf number Field type
3HH-08079-DDAA-TCZZA 01
Description identity of a port(e.g. atm pvc, / efm port, eth port, la group ...) / / / / /
Released
533
20 Bridge Configuration Commands
Resource Identifier
Type
Description
- the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Format: ( | stacked : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [1...4093] Field type - customer vlan identity - range: [0...4093,4096]
(index)
vlan id :
Table 20.4-2 "Bridge Port to VLAN Association Configuration Command" Command Parameters Parameter
Type
Description
(old-tag)
Format: ( untagged | single-tagged | priority-tagged ) Possible values: - untagged : untagged outgoing frames - single-tagged : singletagged outgoing frames - priority-tagged : prioritytagged outgoing frames Parameter type: Format: ( untagged | single-tagged | priority-tagged ) Possible values: - untagged : untagged outgoing frames - single-tagged : singletagged outgoing frames - priority-tagged : prioritytagged outgoing frames Parameter type: Format: (
obsolete parameter replaced by parameter "tag" tag control for egress port
[no] tag
[no] network-vlan
534
Released
optional parameter with default value: "untagged" tag control for egress port
optional parameter with default value: "stacked : 0 : 4097" network vlan id
3HH-08079-DDAA-TCZZA
01
20 Bridge Configuration Commands
Parameter
[no] vlan-scope
[no] qos
3HH-08079-DDAA-TCZZA 01
Type
Description
| stacked : : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [2...4093] Field type - customer vlan identity - range: [0...4093,4096] Parameter type: Format: ( network | local ) Possible values: - network : network wide scope - local : local scope Parameter type: Format: ( priority : | profile : none | profile : trusted-port | profile : best-effort | profile : cl-all-prio-3 | profile : cl-all-prio-4 | profile : background | profile : be-cl-voice | profile : be-cl-1d-voice | profile : be-voice | profile : l2-vpn-3 | profile : l2-vpn-4 | profile : 11 | profile : 12 | profile : 13 | profile : 14 | profile : 15 | profile : 16 | profile : 17 | profile : 18 | profile : 19 | profile : 20 | profile : 21 | profile : 22 | profile : 23 | profile : 24 | profile : 25 | profile : 26 | profile : 27 | profile : 28 | profile : 29 | profile : 30 | profile : 31 | profile : 32 ) Possible values: - priority : fixed priority identify
optional parameter with default value: "network" the vlan scope
optional parameter with default value: "profile : none" the qos policy
Released
535
20 Bridge Configuration Commands
Parameter
Type
Description
[no] prior-best-effort
- profile : regeneration profile identify Field type - priority of ethernet frames - range: [0...7] Possible values: - none : default value - trusted-port : trusted port - best-effort : best effort - cl-all-prio-3 : controlled load, all priority 3 traffic - cl-all-prio-4 : controlled load, all priority 4 traffic - background : background - be-cl-voice : best effort, controlled load, voice - be-cl-1d-voice : best effort, controlled load, 802.Id Annex G voice - be-voice : best effort voice - l2-vpn-3 : L2 VPN with 3 traffic classes - l2-vpn-4 : L2 VPN with 4 traffic classes - 11 : operator-defined profile - 12 : operator-defined profile - 13 : operator-defined profile - 14 : operator-defined profile - 15 : operator-defined profile - 16 : operator-defined profile - 17 : operator-defined profile - 18 : operator-defined profile - 19 : operator-defined profile - 20 : operator-defined profile - 21 : operator-defined profile - 22 : operator-defined profile - 23 : operator-defined profile - 24 : operator-defined profile - 25 : operator-defined profile - 26 : operator-defined profile - 27 : operator-defined profile - 28 : operator-defined profile - 29 : operator-defined profile - 30 : operator-defined profile - 31 : operator-defined profile - 32 : operator-defined profile Parameter type: Format: ( none | name : ) Possible values: - none : no profile name to associate - name : enter profile name to be associated Data driven field type Possible values are depending on the actual configuration and software. The currently allowed values can be shown with online-help. Parameter type: boolean
[no] prior-background
Parameter type: boolean
[no] prior-spare
Parameter type: boolean
[no] qos-profile
536
Released
optional parameter with default value: "none" qos profile name
optional parameter enable best effort priority (value 0) optional parameter enable background priority (value 1) optional parameter
3HH-08079-DDAA-TCZZA
01
20 Bridge Configuration Commands
Parameter
Type
[no] prior-exc-effort
Parameter type: boolean
[no] prior-ctrl-load [no] prior-less-100ms [no] prior-less-10ms [no] prior-nw-ctrl [no] in-qos-prof-name
[no] max-up-qos-policy
[no] max-ip-antispoof
[no] max-unicast-mac
3HH-08079-DDAA-TCZZA 01
Description
enable spare priority (value 2) optional parameter enable the excellent effort priority (value 3) Parameter type: boolean optional parameter enable the controlled load priority (value 4) Parameter type: boolean optional parameter enable video configure arp-relay ( no statistics (vlan-port) ) | ( statistics (vlan-port) )
Command Parameters Table 21.2-1 "Arp-Relay Statistics Configuration Command" Resource Parameters Resource Identifier
Type
(vlan-port)
Format: ( vlan-port : / / : : stacked : : | vlan-port : / / : : | vlan-port : / / : stacked : | vlan-port : / / : | vlan-port : / / / / : stacked : | vlan-port : / / / / | vlan-port : / / / / voip stacked : : | vlan-port : / / / / voip | vlan-port : / / / :
542
Released
Description the vlan-port / : / : / : / / / : / / : / : / : / /
3HH-08079-DDAA-TCZZA
01
21 ARP-RELAY Configuration Commands
Resource Identifier
Type
Description
| vlan-port : / / / / / : stacked : : ) Possible values: - vlan-port : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id
3HH-08079-DDAA-TCZZA 01
Released
543
22- IGMP Configuration Commands
22.1 IGMP Configuration Command Tree 22.2 IGMP Channel Configuration Command 22.3 IGMP Channel Permission Package Members Configuration Command 22.4 IGMP Channel Preview Package Members Configuration Command 22.5 IGMP Package Bitmaps Configuration Command 22.6 IGMP System Configuration Command 22.7 IGMP System CDR Type Configuration Command 22.8 IGMP Vlan System Configuration Command 22.9 IGMP Multicast Vlan Translation Command 22.10 Igmp Multicast Service Context Configuration Command
544
Released
22-545 22-547 22-552 22-554 22-556 22-558 22-561 22-562 22-563 22-564
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
22.1 IGMP Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "IGMP Configuration Commands".
Command Tree ----configure ----igmp ----[no] channel - (port) - [no] perm-pkg-bitmap - [no] max-num-group - [no] mode X (cac-disable) X (ip-anti-spoof-dis) - [no] igmp-version - [no] forking - [no] lt-ont-signaling - [no] mc-pbit-value - [no] mcast-vlan-id - [no] mc-vlan-xlate - [no] mcast-svc-context ----[no] fullview-packages - (package) ----[no] preview-packages - (package) ----package - (index) - [no] name - [no] template-name - [no] template-version ----system - [no] src-ip-address - [no] verify-checksum - [no] query-interval - [no] max-rsp-time - [no] robustness - [no] mem-query-int - [no] last-memb-cnt - [no] last-max-resp-tim - [no] host-report-intv - [no] start - [no] preview-valid - [no] cdr-validation - [no] cdr-generation - [no] except-cdr-rate - [no] cdr-export - [no] cdr-file-aging - [no] cdr-polling - [no] user-igmp-version - [no] netw-igmp-version
3HH-08079-DDAA-TCZZA 01
Released
545
22 IGMP Configuration Commands
- [no] v3-max-num-rec - [no] forking - [no] lt-ont-signaling - [no] vlan-selection - [no] disc-lwr-version ----cdr-type - [no] periodic - [no] period - [no] attempt-max-pview - [no] attempt-blackout - [no] attempt-no-perm ----[no] vlan - (vlan-id) - netw-igmp-version - [no] v3-max-num-rec ----[no] mc-vlan-xlate - (nwvlan) - ponvlan ----[no] mcast-svc-context - (name)
546
Released
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
22.2 IGMP Channel Configuration Command Command Description This command allows the operator to create and configure the IGMP channel parameters.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure igmp ( no channel (port) ) | ( channel (port) [ no perm-pkg-bitmap | perm-pkg-bitmap ] [ no max-num-group | max-num-group ] [ no mode | mode ] [ (cac-disable) ] [ (ip-anti-spoof-dis) ] [ no igmp-version | igmp-version ] [ no forking | forking ] [ no lt-ont-signaling | lt-ont-signaling ] [ no mc-pbit-value | mc-pbit-value ] [ no mcast-vlan-id | mcast-vlan-id ] [ no mc-vlan-xlate | mc-vlan-xlate ] [ no mcast-svc-context | mcast-svc-context ] )
Command Parameters Table 22.2-1 "IGMP Channel Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: identification of the port, vlanport ( / / / or virtual channel : : | / / / | vlan : / / / : : : | vlan : / / / : | vlan : / / / : : : stacked : : | vlan : / / / : stacked : : | vlan : / / / / / / : stacked : : | vlan : / / / / / / : | / / /
3HH-08079-DDAA-TCZZA 01
Description
Released
547
22 IGMP Configuration Commands
Resource Identifier
Type
Description
/ / / | vlan : / / / / / voip : stacked : : | vlan : / / / / / voip : | / / / / / voip | vlan : / / / / / : stacked : : | vlan : / / / / / : | / / / / / ) Possible values: - vlan : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id
Table 22.2-2 "IGMP Channel Configuration Command" Command Parameters Parameter
Type
Description
[no] perm-pkg-bitmap
Parameter type: Format:
optional parameter with default value: "01 : 00 : 00 : 00 : 00 : 00
548
Released
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
Parameter
[no] max-num-group
[no] mode
(cac-disable)
(ip-anti-spoof-dis)
[no] igmp-version
[no] forking
3HH-08079-DDAA-TCZZA 01
Type
Description
- a binary string - length: 128
: 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00" packages, the user is allowed to join optional parameter with default value: 0 max group number the port can support optional parameter with default value: "ipoe" protocol mode (ipoe or pppoe)
Parameter type: Format: - max group number this port can support - range: [0...1024] Parameter type: Format: ( ipoe | pppoe ) Possible values: - ipoe : IPoE mode - pppoe : PPPoE Format: ( cac-disable | cac ) Possible values: - cac-disable : disables bandwidth CAC for conf. streams,default=enable - cac : enables bandwidth CAC for conf. streams,default=enable Format: ( ip-anti-spoof-dis | ip-anti-spoof ) Possible values: ip-anti-spoof-dis : disables IP@ anti-spoofing,default=enable - ip-anti-spoof : enables IP@ anti-spoofing,default=enable Parameter type: Format: ( system-inherited |2 |3) Possible values: - system-inherited : inherits GMQs to userversion from the System level - 2 : IGMPV2 GMQs - 3 : IGMPV3 GMQs Parameter type:
obsolete parameter that will be ignored bandwidth CAC for pre-configured multicast streams
obsolete parameter that will be ignored enables IP@ anti-spoofing on this user-interface
optional parameter with default value: "system-inherited" version of the IGMP protocol
optional parameter with default
Released
549
22 IGMP Configuration Commands
Parameter
[no] lt-ont-signaling
[no] mc-pbit-value
[no] mcast-vlan-id
[no] mc-vlan-xlate
[no] mcast-svc-context
Type
Description
Format: ( system-inherited | enable | disable ) Possible values: - system-inherited : inherits forking status from the system level - enable : enable IGMP forking - disable : disable IGMP forking Parameter type: Format: ( enabled | disabled | inherited ) Possible values: - enabled : lt to ont signaling is enabled - disabled : lt to ont signaling is disabled - inherited : inherits lt to ont signaling from the system level Parameter type: Format: - default P-bit value to be used by the ONT on the UNI-side for downstream multicast traffic towards subscribers - range: [0...8]
value: "system-inherited" forking status of the IGMP protocol
Parameter type: Format: - vlan selection value - range: [0...4093] Parameter type: Format: ( enabled | disabled ) Possible values: - enabled : allow mcast vlan translation - disabled : disallow mcast vlan translation Parameter type: Format: ( default | | name : ) Possible values: - default : default profile is associated - name : profile name Field type - profile index - range: [0...64] Field type - printable string
optional parameter with default value: "inherited" The parameter is not visible during modification. lt to ont signaling parameter
optional parameter with default value: 8 default P-bit value to be used by the ONT on the UNI-side for downstream multicast traffic towards subscribers optional parameter with default value: 0 vlan selection for multicast channel optional parameter with default value: "disabled" to enable or disable mcast vlan translation
optional parameter with default value: "default" The parameter is not visible during modification. Multicast Service Context name
Command Output Table 22.2-3 "IGMP Channel Configuration Command" Display parameters Specific Information name mcast-svc-context-name
550
Released
Type
Description
Parameter type: - ignored printable string
Multicast Service Context name This element is always shown.
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
3HH-08079-DDAA-TCZZA 01
Released
551
22 IGMP Configuration Commands
22.3 IGMP Channel Permission Package Members Configuration Command Command Description This command allows the operator to configure the IGMP channel permission package members.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure igmp channel (port) ( no fullview-packages (package) ) | ( fullview-packages (package) )
Command Parameters Table 22.3-1 "IGMP Channel Permission Package Members Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: identification of the port, vlanport ( / / / or virtual channel : : | / / / | vlan : / / / : : : | vlan : / / / : | vlan : / / / : : : stacked : : | vlan : / / / : stacked : : | vlan : / / / / / / : stacked : : | vlan : / / / / / / : | / / / / / /
552
Released
Description
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
Resource Identifier
(package)
3HH-08079-DDAA-TCZZA 01
Type
Description
| vlan : / / / / / voip : stacked : : | vlan : / / / / / voip : | / / / / / voip | vlan : / / / / / : stacked : : | vlan : / / / / / : | / / / / / ) Possible values: - vlan : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id Format: package member - the package number - range: [1...1024]
Released
553
22 IGMP Configuration Commands
22.4 IGMP Channel Preview Package Members Configuration Command Command Description This command allows the operator to configure the IGMP channel preview package members.
User Level The command can be accessed by operators with vlan privileges, and executed by operators with vlan privileges.
Command Syntax The command has the following syntax: > configure igmp channel (port) ( no preview-packages (package) ) | ( preview-packages (package) )
Command Parameters Table 22.4-1 "IGMP Channel Preview Package Members Configuration Command" Resource Parameters Resource Identifier
Type
(port)
Format: identification of the port, vlanport ( / / / or virtual channel : : | / / / | vlan : / / / : : : | vlan : / / / : | vlan : / / / : : : stacked : : | vlan : / / / : stacked : : | vlan : / / / / / / : stacked : : | vlan : / / / / / / : | / / / / / /
554
Released
Description
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
Resource Identifier
(package)
3HH-08079-DDAA-TCZZA 01
Type
Description
| vlan : / / / / / voip : stacked : : | vlan : / / / / / voip : | / / / / / voip | vlan : / / / / / : stacked : : | vlan : / / / / / : | / / / / / ) Possible values: - vlan : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id Format: package member - the package number - range: [1...1024]
Released
555
22 IGMP Configuration Commands
22.5 IGMP Package Bitmaps Configuration Command Command Description This command allows the operator to configure IGMP package bitmaps. The package is intended primarily for use by a network/element manager, such as an AMS, to support multiple sets of packages in different regions. A package is a group of zero or more multicast sources that share a common access permission. Grouping the source channels into one or more packages provides flexibility for the service provider to deliver different levels of services to the end users; for example, "Basic Package", "Middle-Tier Package", and "Premium Package". NOTE:There is no requirement to configure the package. If the package is modified, there is no effect on the multicast source.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure igmp package (index) [ no name | name ] [ no template-name | template-name ] [ no template-version | template-version ]
Command Parameters Table 22.5-1 "IGMP Package Bitmaps Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - index of the package - range: [1...1024]
index of the package
Table 22.5-2 "IGMP Package Bitmaps Configuration Command" Command Parameters Parameter
Type
Description
[no] name
Parameter type: Format: - a printable string - length: x configure igmp system cdr-type [ [ no ] periodic ] [ no period | period ] [ [ no ] attempt-max-pview ] [ [ no ] attempt-blackout ] [ [ no ] attempt-no-perm ]
Command Parameters Table 22.7-2 "IGMP System CDR Type Configuration Command" Command Parameters Parameter
Type
Description
[no] periodic
Parameter type: boolean
[no] period
[no] attempt-max-pview
Parameter type: Format: - intermediate CDR generation period, in multiples of 5 - unit: min - range: [15...60] Parameter type: boolean
optional parameter interim CDR records generated for fullview/preview optional parameter with default value: 15 intermediate CDR generation period
[no] attempt-blackout
Parameter type: boolean
[no] attempt-no-perm
Parameter type: boolean
3HH-08079-DDAA-TCZZA 01
optional parameter CDR generated when max nbr preview exceeded is true optional parameter CDR generated allowed when blackout period is active optional parameter CDR generated to join a mcast with no access rights
Released
561
22 IGMP Configuration Commands
22.8 IGMP Vlan System Configuration Command Command Description This command allows the operator to configure the IGMP parameters on a per Vlan basis.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure igmp ( no vlan (vlan-id) ) | ( vlan (vlan-id) netw-igmp-version [ no v3-max-num-rec | v3-max-num-rec ] )
Command Parameters Table 22.8-1 "IGMP Vlan System Configuration Command" Resource Parameters Resource Identifier
Type
Description
(vlan-id)
Format: - vlan index - range: [1...4093]
index of the system vlan
Table 22.8-2 "IGMP Vlan System Configuration Command" Command Parameters Parameter
Type
Description
netw-igmp-version
Parameter type: Format: (2 |3) Possible values: - 2 : IGMP version2 - 3 : IGMP version3 Parameter type: Format: - max num of group records in one IGMPv3 report (2 exp N) - range: [0...10]
mandatory parameter IGMP version of the protocol
[no] v3-max-num-rec
562
Released
optional parameter with default value: 3 max num of group records in one IGMPv3 report (2 exp N)
3HH-08079-DDAA-TCZZA
01
22 IGMP Configuration Commands
22.9 IGMP Multicast Vlan Translation Command Command Description This command allows the operator configure source-pon vlan translation.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure igmp ( no mc-vlan-xlate (nwvlan) ) | ( mc-vlan-xlate (nwvlan) ponvlan )
Command Parameters Table 22.9-1 "IGMP Multicast Vlan Translation Command" Resource Parameters Resource Identifier
Type
Description
(nwvlan)
Format: - the multicast vlan id - range: [2...4093]
identification of the network-side virtual lan
Table 22.9-2 "IGMP Multicast Vlan Translation Command" Command Parameters Parameter
Type
Description
ponvlan
Parameter type: Format: - vlan index - range: [1...4093]
mandatory parameter identification of the pon-side virtual lan
3HH-08079-DDAA-TCZZA 01
Released
563
22 IGMP Configuration Commands
22.10 Igmp Multicast Service Context Configuration Command Command Description This command allows the operator to configure multicast service context
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure igmp ( no mcast-svc-context (name) ) | ( mcast-svc-context (name) )
Command Parameters Table 22.10-1 "Igmp Multicast Service Context Configuration Command" Resource Parameters Resource Identifier
Type
Description
(name)
Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1 configure mcast general ( no package-member (package) ) | ( package-member (package) )
Command Parameters Table 23.3-1 "General Multicast Package Members Configuration Command" Resource Parameters Resource Identifier
Type
Description
(package)
Format: - the package number - range: [1...1024]
package member
570
Released
3HH-08079-DDAA-TCZZA
01
23 Multicast Configuration Commands
23.4 Multicast Capacity Configuration Command Command Description This command allows the operator to configure the multicast capacity parameters.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure mcast capacity [ no max-num-group | max-num-group ] [ no max-num-uncfg | max-num-uncfg ] [ no cfg-res-time | cfg-res-time ] [ no uncfg-res-time | uncfg-res-time ]
Command Parameters Table 23.4-2 "Multicast Capacity Configuration Command" Command Parameters Parameter
Type
Description
[no] max-num-group
Parameter type: Format: - no of groups the system can support in enough bandwidth - range: [0...1024] Parameter type: Format: - no of uncfg grps,system can support in enough bandwidth - range: [0...1024] Parameter type: Format: - time to reserve - unit: sec - range: [0...2147483647] Parameter type: Format: - time to reserve - unit: sec - range: [0...2147483647]
optional parameter with default value: 1024 no of grps the system supports in enough bandwidth optional parameter with default value: 64 no of uncfg grps the system supports in enough bandwidth optional parameter with default value: 125 time to reserve the unused guaranteed configured groups
[no] max-num-uncfg
[no] cfg-res-time
[no] uncfg-res-time
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: 0 time to reserve the unused unconfigured groups
Released
571
23 Multicast Configuration Commands
23.5 Multicast Channel Configuration Command Command Description This command allows the operator to configure the multicast channel. Note:Mcast channel can not be deleted when VlanSelection is enabled.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure mcast ( no channel (grp-ip-addr) src-ip-addr ) | ( channel (grp-ip-addr) src-ip-addr [ [ no ] dis-fast-change ] [ no pkg-mem-bitmap | pkg-mem-bitmap ] [ no name | name ] [ [ no ] guaranteed-serv ] [ no peak-bit-rate | peak-bit-rate ] vlan-id [ no service-name | service-name ] [ no preview-duration | preview-duration ] [ no preview-number | preview-number ] [ no preview-blackout | preview-blackout ] )
Command Parameters Table 23.5-1 "Multicast Channel Configuration Command" Resource Parameters Resource Identifier
Type
Description
(grp-ip-addr)
Format: - multicast-address (range: 224.0.0.3....239.255.255.255) Parameter type: Format: - IPv4-address
ip address identifying the multicast group ip address of the multicast server originating the multicast channel,value 0.0.0.0 means ASM(any-src-ip-addr),range:0.0.0.0....22
src-ip-addr
Table 23.5-2 "Multicast Channel Configuration Command" Command Parameters Parameter
Type
Description
[no] dis-fast-change
Parameter type: boolean
[no] pkg-mem-bitmap
Parameter type: Format: - a binary string - length: 128
optional parameter disable fast channel change optional parameter with default value: "01 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 :
572
Released
3HH-08079-DDAA-TCZZA
01
23 Multicast Configuration Commands
Parameter
[no] name
[no] guaranteed-serv
Type
Description 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00 : 00" indicates to which package(s) a mcast channel belongs optional parameter with default value: "" name of the mcast channel
Parameter type: Format: - a printable string - length: x configure mcast ( no chn (grp-ip-addr) src-ip-addr vlan-id ) | ( chn (grp-ip-addr) src-ip-addr vlan-id [ no end-ip-addr | end-ip-addr ] [ no mcast-svc-context | mcast-svc-context ] [ [ no ] dis-fast-change ] [ no name | name ] [ [ no ] guaranteed-serv ] [ no peak-bit-rate | peak-bit-rate ] [ no service-name | service-name ] [ no preview-duration | preview-duration ] [ no preview-number | preview-number ] [ no preview-blackout | preview-blackout ] )
Command Parameters Table 23.7-1 "Multicast Channel Configuration Command" Resource Parameters Resource Identifier
Type
Description
(grp-ip-addr)
Format: - multicast-address (range: 224.0.0.3....239.255.255.255) Parameter type: Format: - IPv4-address
ip address identifying the multicast group ip address of the multicast server originating the multicast channel,value 0.0.0.0 means ASM(any-src-ip-addr),range:0.0.0.0....22 vlanid of the multicast channel which is configured in it
src-ip-addr
vlan-id
Parameter type: Format: - vlan id for multicast - range: [1...4093]
Table 23.7-2 "Multicast Channel Configuration Command" Command Parameters Parameter
Type
Description
[no] end-ip-addr
Parameter type: Format: - IPv4-address
optional parameter with default value: "0.0.0.0" The parameter is not visible during modification. end ip address of the multicast server originating the multicast
3HH-08079-DDAA-TCZZA 01
Released
575
23 Multicast Configuration Commands
Parameter
Type
[no] mcast-svc-context
Parameter type: Format: ( default | | name : ) Possible values: - default : default profile is associated - name : profile name Field type - profile index - range: [0...64] Field type - printable string Parameter type: boolean
[no] dis-fast-change [no] name
[no] guaranteed-serv
Description
Parameter type: Format: - a printable string - length: x configure mcast monitor ( no src (grp-ip-addr) src-ip-addr ) | ( src (grp-ip-addr) src-ip-addr [ no loss-duration | loss-duration ] [ no loss-thresh-alert | loss-thresh-alert ] )
Command Parameters Table 23.9-1 "Multicast Monitoring Source Configuration Command" Resource Parameters Resource Identifier
Type
Description
(grp-ip-addr)
Format: - multicast-address (range: 224.0.0.3....239.255.255.255, except for 224.0.0.22) Parameter type: Format: - IPv4-address
mcast src address in network-byte order(big-endian)
src-ip-addr
Unicast IP address in case SSM multicast channel, value 0.0.0.0 means ASM(any-src-ip-addr)
Table 23.9-2 "Multicast Monitoring Source Configuration Command" Command Parameters Parameter
Type
Description
[no] loss-duration
Parameter type: Format: - duration - unit: sec - range: [5...2147483647] Parameter type: Format: - the threshold for loss of traffic alert, 0 - disable - range: [0...4294967295]
optional parameter with default value: 15 set the duration to count packets
[no] loss-thresh-alert
578
Released
optional parameter with default value: 0 set loss of traffic threshold, alert generated if packet count is less or equal to the threshold.
3HH-08079-DDAA-TCZZA
01
23 Multicast Configuration Commands
23.10 Multicast Monitoring Channel Configuration Command Command Description This command allows the operator to configure on demand monitoring for a specified multicast stream.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure mcast monitor ( no chn (grp-ip-addr) src-ip-addr vlan-id ) | ( chn (grp-ip-addr) src-ip-addr vlan-id [ no loss-duration | loss-duration ] [ no loss-thresh-alert | loss-thresh-alert ] )
Command Parameters Table 23.10-1 "Multicast Monitoring Channel Configuration Command" Resource Parameters Resource Identifier
Type
Description
(grp-ip-addr)
Format: - multicast-address (range: 224.0.0.3....239.255.255.255, except for 224.0.0.22) Parameter type: Format: - IPv4-address Parameter type: Format: - vlan id for multicast - range: [0...4093]
mcast src address in network-byte order(big-endian)
src-ip-addr vlan-id
Unicast IP address in case SSM multicast channel, value 0.0.0.0 means ASM(any-src-ip-addr) vlanid of the multicast channel. Value 0 means any VLAN ID
Table 23.10-2 "Multicast Monitoring Channel Configuration Command" Command Parameters Parameter
Type
Description
[no] loss-duration
Parameter type: Format: - duration - unit: sec - range: [5...2147483647] Parameter type: Format: - the threshold for loss of traffic alert, 0 - disable - range: [0...4294967295]
optional parameter with default value: 15 set the duration to count packets
[no] loss-thresh-alert
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: 0 set loss of traffic threshold, alert generated if packet count is less or equal to the threshold.
Released
579
23 Multicast Configuration Commands
23.11 Multicast Static Branch Configuration Command Command Description This command allow the operator to configure the static multicast branch. When at least one static multicast branch is created, the corresponding static multicast root is created.
User Level The command can be accessed by operators with igmp privileges, and executed by operators with igmp privileges.
Command Syntax The command has the following syntax: > configure mcast static ( no branch (grp-ip-addr) src-ip-addr port ) | ( branch (grp-ip-addr) src-ip-addr port )
Command Parameters Table 23.11-1 "Multicast Static Branch Configuration Command" Resource Parameters Resource Identifier
Type
Description
(grp-ip-addr)
Format: - multicast-address (range: 224.0.0.3....239.255.255.255) Parameter type: Format: - IPv4-address
ip address identifying the multicast group ip address of the multicast server originating the multicast channel, value 0.0.0.0 means ASM(any-src-ip-addr),range:0.0.0.0....22 identification of the vlanport
src-ip-addr
port
580
Parameter type: Format: ( / / / : : : | / / / : | / / / : : : stacked : : | / / / : stacked : : ) Field type - the rack number Field type - the shelf number Field type - the LT slot number
Released
3HH-08079-DDAA-TCZZA
01
23 Multicast Configuration Commands
Resource Identifier
Type
Description
Field type - the port number Field type - atm VPI Field type - atm VCI Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id
3HH-08079-DDAA-TCZZA 01
Released
581
24- PPPoX-Relay Configuration Commands
24.1 PPPoX-Relay Configuration Command Tree 24.2 PPPoX Cross-connect Global Configuration Command 24.3 PPPoX Cross-connect Engine Configuration Command 24.4 PPPoX Cross-connect Engine Monitoring Configuration Command 24.5 PPPoX Cross-connect Client Port Configuration Command 24.6 PPPoX Cross-connect Client Port Monitoring Configuration Command
582
Released
24-583 24-584 24-586 24-588 24-589 24-592
3HH-08079-DDAA-TCZZA
01
24 PPPoX-Relay Configuration Commands
24.1 PPPoX-Relay Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "PPPoX-Relay Configuration Commands".
Command Tree ----configure ----pppox-relay ----cross-connect ----global-session - [no] pado-timeout - [no] pads-timeout - [no] max-pad-attempts - [no] trans-max-age - [no] cc-max-age ----[no] engine - (vlan-id) - [no] mac-addr-conc - [no] dslf-iwf-tag - [no] max-payload-tag - [no] name - [no] lock - [no] service-name ----[no] monitor ----[no] client-port - (port) - vlan-id - default-priority - [no] max-cc - [no] qos-profile ----[no] monitor
3HH-08079-DDAA-TCZZA 01
Released
583
24 PPPoX-Relay Configuration Commands
24.2 PPPoX Cross-connect Global Configuration Command Command Description This command allows the operator to specify the system-wide configuration parameters applicable to all PPP sessions.
User Level The command can be accessed by operators with pppoe privileges, and executed by operators with pppoe privileges.
Command Syntax The command has the following syntax: > configure pppox-relay cross-connect global-session [ no pado-timeout | pado-timeout ] [ no pads-timeout | pads-timeout ] [ no max-pad-attempts | max-pad-attempts ] [ no trans-max-age | trans-max-age ] [ no cc-max-age | cc-max-age ]
Command Parameters Table 24.2-2 "PPPoX Cross-connect Global Configuration Command" Command Parameters Parameter
Type
Description
[no] pado-timeout
Parameter type: Format: - timeout for PAD-O PAD-S messages - unit: sec - range: [1...60] Parameter type: Format: - timeout for PAD-O PAD-S messages - unit: sec - range: [1...60] Parameter type: Format: - maximum number of PAD-R messages - range: [1...16] Parameter type: Format: - maximum age of PPP transaction - unit: sec - range: [1...300] Parameter type: Format:
optional parameter with default value: 3 timeout for PAD-O message
[no] pads-timeout
[no] max-pad-attempts
[no] trans-max-age
[no] cc-max-age
584
Released
optional parameter with default value: 3 timeout for PAD-S message optional parameter with default value: 10 maximum number of PAD-R messages optional parameter with default value: 300 maximum age of PPP transaction optional parameter with default value: 300
3HH-08079-DDAA-TCZZA
01
24 PPPoX-Relay Configuration Commands
Parameter
3HH-08079-DDAA-TCZZA 01
Type
Description
- maximum age of PPP cross-connection - range: [10...3000]
maximum age of PPP cross connection
Released
585
24 PPPoX-Relay Configuration Commands
24.3 PPPoX Cross-connect Engine Configuration Command Command Description This command allows the operator to configure the PPP cross-connect engine. The PPP cross-connect engine is identified by a VLAN ID. The name is the name used to identify the PPP cross-connect engine. The lock command locks or unlocks the PPP control plane. For example, if the control plane is unlocked, no new PPP cross-connections can be established, but the existing connections remain until they are released by the PPP server or client.
User Level The command can be accessed by operators with pppoe privileges, and executed by operators with pppoe privileges.
Command Syntax The command has the following syntax: > configure pppox-relay cross-connect ( no engine (vlan-id) ) | ( engine (vlan-id) [ [ no ] mac-addr-conc ] [ [ no ] dslf-iwf-tag ] [ no max-payload-tag | max-payload-tag ] [ no name | name ] [ [ no ] lock ] [ no service-name | service-name ] )
Command Parameters Table 24.3-1 "PPPoX Cross-connect Engine Configuration Command" Resource Parameters Resource Identifier
Type
Description
(vlan-id)
Format: ( | stacked : : ) Possible values: - stacked : stacked vlan identity Field type - unstacked vlan identity - range: [1...4093,4096] Field type - service vlan identity - range: [2...4093] Field type - customer vlan identity - range: [0...4093,4096]
vlan identity
Table 24.3-2 "PPPoX Cross-connect Engine Configuration Command" Command Parameters Parameter
Type
Description
[no] mac-addr-conc
Parameter type: boolean
optional parameter The parameter is not visible
586
Released
3HH-08079-DDAA-TCZZA
01
24 PPPoX-Relay Configuration Commands
Parameter
Type
Description
[no] dslf-iwf-tag
Parameter type: boolean
[no] max-payload-tag
Parameter type: Format: ( insert | no-insert ) Possible values: - insert : add tag holding the MRU to PADI and PADR messages - no-insert : donot add tag holding the MRU to PADI and PADR messages Parameter type: Format: - Engine Name - length: 1 configure dhcp-relay ( no v6-port-stats (port-interface) ) | ( v6-port-stats (port-interface) )
Command Parameters Table 26.3-1 "DHCP v6 Relay User Port Configuration Command" Resource Parameters Resource Identifier
Type
(port-interface)
Format: ( vlan-port : / / : : | vlan-port : / / : | vlan-port : / / : : stacked : : | vlan-port : / / : stacked : | vlan-port : / / / / : stacked : | vlan-port : / / / / | vlan-port : / / / / voip stacked : : | vlan-port : / / / / voip
602
Released
Description identification of vlan port / : / / : / : / / : / / : / : / :
3HH-08079-DDAA-TCZZA
01
26 DHCP Relay Configuration Commands
Resource Identifier
Type
Description
| vlan-port : / / / : | vlan-port : / / / : stacked : : ) Possible values: - vlan-port : vlan port Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Field type - atm VPI Field type - atm VCI Field type - the PON identifier Field type - the ONT identifier Possible values: - voip : virtual uni identifier Field type - the ONT SLOT identifier Field type - the ONT PORT identifier Field type - the LLID identifier Possible values: - stacked : stacked vlan identity Field type - unstacked vlan id Field type - service vlan id Field type - customer vlan id
3HH-08079-DDAA-TCZZA 01
/ / / /
Released
603
27- XDSL Bonding Configuration Commands
27.1 XDSL Bonding Configuration Command Tree 27.2 XDSL Bonding Assembly Timer Configuration Command 27.3 xDSL Bonding Group Profile Configuration Command 27.4 xDSL Bonding Configuration Command 27.5 xDSL Bonding Configuration Command
604
Released
27-605 27-606 27-607 27-610 27-612
3HH-08079-DDAA-TCZZA
01
27 XDSL Bonding Configuration Commands
27.1 XDSL Bonding Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "XDSL Bonding Configuration Commands".
Command Tree ----configure ----xdsl-bonding - group-assembly-time ----[no] group-profile - (index) - name - (scope) - version - [no] min-bitrate-up - [no] min-bitrate-down - [no] plan-bitrate-up - [no] plan-bitrate-down - [no] max-bitrate-up - [no] max-bitrate-down - [no] max-delay-down - [no] max-delay-up - [no] imp-noise-prot-dn - [no] imp-noise-prot-up - [no] delay-opt-mode-ds - [no] active ----group - (bonding-group-idx) - [no] group-profile X [no] admin-up - [no] up ----[no] link - (bonding-link-id)
3HH-08079-DDAA-TCZZA 01
Released
605
27 XDSL Bonding Configuration Commands
27.2 XDSL Bonding Assembly Timer Configuration Command Command Description This node provides the provisioning of the bonding group assembly timeout. Default value is zero ('0', represents an infinite time ), and will have as consequence that the bonding group will not come up till all lines in this bonding group are up.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure xdsl-bonding group-assembly-time
Command Parameters Table 27.2-2 "XDSL Bonding Assembly Timer Configuration Command" Command Parameters Parameter
Type
Description
group-assembly-time
Parameter type: Format: - second - unit: sec - range: [0...65535]
optional parameter Max waiting period for group to become operational
606
Released
3HH-08079-DDAA-TCZZA
01
27 XDSL Bonding Configuration Commands
27.3 xDSL Bonding Group Profile Configuration Command Command Description This command allows to manage the xDSL bonding group profile. A profile can be created in one step with all the necessary parameters and making it active. It can also be created in several steps by specifying a few parameters in each step and make the profile active in the last step. DESCRIPTION FOR THE COMMAND PARAMETER-SCOPE:The combination scope+profile must be unique.Typically local-profile must be used especially when configuring via CLI.Use of network-profile is depreciated.The network-profile was foreseen to allow management agents to define network-wide unique profiles,independent of what local profiles may have been created.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure xdsl-bonding ( no group-profile (index) ) | ( group-profile (index) name (scope) version [ no min-bitrate-up | min-bitrate-up ] [ no min-bitrate-down | min-bitrate-down ] [ no plan-bitrate-up | plan-bitrate-up ] [ no plan-bitrate-down | plan-bitrate-down ] [ no max-bitrate-up | max-bitrate-up ] [ no max-bitrate-down | max-bitrate-down ] [ no max-delay-down | max-delay-down ] [ no max-delay-up | max-delay-up ] [ no imp-noise-prot-dn | imp-noise-prot-dn ] [ no imp-noise-prot-up | imp-noise-prot-up ] [ no delay-opt-mode-ds | delay-opt-mode-ds ] [ [ no ] active ] )
Command Parameters Table 27.3-1 "xDSL Bonding Group Profile Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - bonding group profile index - range: [1...100]
index of the profile
Table 27.3-2 "xDSL Bonding Group Profile Configuration Command" Command Parameters Parameter
Type
Description
name
Parameter type: Format: - a profile name - range: [a-zA-Z0-9-_.] - length: 1 configure xdsl-bonding group (bonding-group-idx) ( no link (bonding-link-id) ) | ( link (bonding-link-id) )
Command Parameters Table 27.5-1 "xDSL Bonding Configuration Command" Resource Parameters Resource Identifier
Type
(bonding-group-idx)
Format: a unique interface index / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Format: a bonding link interface index / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number
(bonding-link-id)
612
Released
Description
3HH-08079-DDAA-TCZZA
01
28- CPE Remote Configuration Commands
28.1 CPE Remote Configuration Command Tree 28.2 CPE Remote Management System Configuration Commands 28.3 CPE Manager Configuration Command 28.4 CPE IPProxy Session Configuration Command
3HH-08079-DDAA-TCZZA 01
28-614 28-615 28-616 28-617
Released
613
28 CPE Remote Configuration Commands
28.1 CPE Remote Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "CPE Remote Configuration Commands".
Command Tree ----configure ----cpe-management - [no] proxy-mode X vlan-id ----[no] manager - (address) ----X [no] session - (dslport) - connection
614
Released
3HH-08079-DDAA-TCZZA
01
28 CPE Remote Configuration Commands
28.2 CPE Remote Management System Configuration Commands Command Description This command allows to configure CPE Remote Management System;
User Level The command can be accessed by operators with security privileges, and executed by operators with security privileges.
Command Syntax The command has the following syntax: > configure cpe-management [ no proxy-mode | proxy-mode ] [ vlan-id ]
Command Parameters Table 28.2-2 "CPE Remote Management System Configuration Commands" Command Parameters Parameter
Type
Description
[no] proxy-mode
Parameter type: Format: ( snmp | none ) Possible values: - snmp : this mode is relaying SNMP messages - none : disables the cpeproxy Parameter type: Format: - cpe ipproxy vlan number - range: [0...4093]
optional parameter with default value: "none" set the CPE Proxy mode
vlan-id
3HH-08079-DDAA-TCZZA 01
obsolete parameter that will be ignored configure the svlan number.
Released
615
28 CPE Remote Configuration Commands
28.3 CPE Manager Configuration Command Command Description This command allows to configure a CPE manager.
User Level The command can be accessed by operators with security privileges, and executed by operators with security privileges.
Command Syntax The command has the following syntax: > configure cpe-management ( no manager (address) ) | ( manager (address) )
Command Parameters Table 28.3-1 "CPE Manager Configuration Command " Resource Parameters Resource Identifier
Type
Description
(address)
Format: : Field type - IP address of CPE Management Station Field type - cpe management station udp port number - range: [1...65535]
the address of a CPE manager
616
Released
3HH-08079-DDAA-TCZZA
01
28 CPE Remote Configuration Commands
28.4 CPE IPProxy Session Configuration Command Command Description Obsolete command.
User Level The command can be accessed by operators with security privileges, and executed by operators with security privileges.
Command Syntax The command has the following syntax: > configure cpe-management ( no session )
(dslport)
)
|
(
session
(dslport)
connection
Obsolete command.
Command Parameters Table 28.4-1 "CPE IPProxy Session Configuration Command " Resource Parameters Resource Identifier
Type
(dslport)
Format: identification of port to which the / / / CPE is connected Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number
Description
Table 28.4-2 "CPE IPProxy Session Configuration Command " Command Parameters Parameter
Type
connection
Parameter Format: - cpe ipproxy port number - range: [0,13410...13457]
3HH-08079-DDAA-TCZZA 01
Description type: mandatory parameter protocol port for ipproxy session.
Released
617
29- SHDSL Configuration Commands
29.1 SHDSL Configuration Command Tree 29.2 SHDSL Span Configuration Command 29.3 SHDSL Unit Configuration Command 29.4 SHDSL Segment Configuration Command
618
Released
29-619 29-621 29-626 29-628
3HH-08079-DDAA-TCZZA
01
29 SHDSL Configuration Commands
29.1 SHDSL Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "SHDSL Configuration Commands".
Command Tree ----configure ----shdsl ----span - (if-index) - [no] active - [no] admin-up - [no] repeaters - [no] op-mode - [no] spectral-profile - [no] wire-mode - [no] mgmt-by-stu-r - [no] regi-set - [no] min-line-rate - [no] max-line-rate - [no] margin-down-worst - [no] margin-down-curr - [no] margin-up-worst - [no] margin-up-curr - [no] probe - [no] tc-pam-sele - [no] efm-hs-sele - [no] bonding-rate-mode - [no] min-rate-link1 - [no] max-rate-link1 - [no] min-rate-link2 - [no] max-rate-link2 - [no] min-rate-link3 - [no] max-rate-link3 - [no] min-rate-link4 - [no] max-rate-link4 - [no] tc-pam-link1 - [no] tc-pam-link2 - [no] tc-pam-link3 - [no] tc-pam-link4 - [no] ctc ----unit - (if-index) - unit-id - [no] loop-attenuation - [no] snr-margin - [no] loopback-timeout ----segment - (if-index) - unit-id - side
3HH-08079-DDAA-TCZZA 01
Released
619
29 SHDSL Configuration Commands
- [no] loopback - [no] pbo-mode
620
Released
3HH-08079-DDAA-TCZZA
01
29 SHDSL Configuration Commands
29.2 SHDSL Span Configuration Command Command Description This command allows the operator to manage the SHDSL span profile. The lines, which you can configure, are calculated via the next formula: m*n + 1 o where m is the number of pairs per modem o where n is from 0 till 24/m - 1 Mixing of different "wire mode" on the same LT is possible as long as the lines are not occupied yet.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure shdsl span (if-index) [ [ no ] active ] [ [ no ] admin-up ] [ no repeaters | repeaters ] [ no op-mode | op-mode ] [ no spectral-profile | spectral-profile ] [ no wire-mode | wire-mode ] [ [ no ] mgmt-by-stu-r ] [ no regi-set | regi-set ] [ no min-line-rate | min-line-rate ] [ no max-line-rate | max-line-rate ] [ no margin-down-worst | margin-down-worst ] [ no margin-down-curr | margin-down-curr ] [ no margin-up-worst | margin-up-worst ] [ no margin-up-curr | margin-up-curr ] [ no probe | probe ] [ no tc-pam-sele | tc-pam-sele ] [ no efm-hs-sele | efm-hs-sele ] [ no bonding-rate-mode | bonding-rate-mode ] [ no min-rate-link1 | min-rate-link1 ] [ no max-rate-link1 | max-rate-link1 ] [ no min-rate-link2 | min-rate-link2 ] [ no max-rate-link2 | max-rate-link2 ] [ no min-rate-link3 | min-rate-link3 ] [ no max-rate-link3 | max-rate-link3 ] [ no min-rate-link4 | min-rate-link4 ] [ no max-rate-link4 | max-rate-link4 ] [ no tc-pam-link1 | tc-pam-link1 ] [ no tc-pam-link2 | tc-pam-link2 ] [ no tc-pam-link3 | tc-pam-link3 ] [ no tc-pam-link4 | tc-pam-link4 ] [ no ctc | ctc ]
Command Parameters Table 29.2-1 "SHDSL Span Configuration Command" Resource Parameters Resource Identifier
Type
(if-index)
Format: interface index of the port / / / Field type - the rack number Field type
3HH-08079-DDAA-TCZZA 01
Description
Released
621
29 SHDSL Configuration Commands
Resource Identifier
Type
Description
- the shelf number Field type - the LT slot number Field type - the port number
Table 29.2-2 "SHDSL Span Configuration Command" Command Parameters Parameter
Type
Description
[no] active
Parameter type: boolean
[no] admin-up
Parameter type: boolean
[no] repeaters
Parameter type: Format: - the number of SRUs to be configured for this span - range: [0...8] Parameter type: Format: ( native | ima | efm ) Possible values: - native : the operational mode is native - ima : the operational mode is ima - efm : the operational mode is efm Parameter type: Format: ( symmetric | asymmetric ) Possible values: - symmetric : the spectral mode is symmetric - asymmetric : the spectral mode is asymmetric Parameter type: Format: ( two-wire | four-wire | six-wire | eight-wire ) Possible values: - two-wire : the M-pair operation is one-pair - four-wire : the M-pair operation is two-pair - six-wire : the M-pair operation is three-pair - eight-wire : the M-pair operation is four-pair Parameter type: boolean
optional parameter set the span-profile active optional parameter admin status is up optional parameter with default value: 0 number of repeaters
[no] op-mode
[no] spectral-profile
[no] wire-mode
[no] mgmt-by-stu-r [no] regi-set
Parameter type: Format: ( annex-a/f | annex-b/g ) Possible values: - annex-a/f : Annex A/F Region 1 - annex-b/g : Annex B/G Region 2 Parameter type: Format: - bitrate - unit: kbits/sec
[no] min-line-rate
622
Released
optional parameter with default value: "native" span operational mode
optional parameter with default value: "symmetric" spectral mode
optional parameter with default value: "two-wire" M-pair operation wire mode
optional parameter enable the STU-R initiated management flow optional parameter with default value: "annex-b/g" the number specifies regional setting
optional parameter with default value: 192 the minimum requested data rate
3HH-08079-DDAA-TCZZA
01
29 SHDSL Configuration Commands
Parameter
Type
Description
[no] max-line-rate
Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - a noise margin value of worst conditions - unit: db - range: [-11...10] Parameter type: Format: - a noise margin value of current conditions - unit: db - range: [-11,0...10] Parameter type: Format: - a noise margin value of worst conditions - unit: db - range: [-11...10] Parameter type: Format: - a noise margin value of current conditions - unit: db - range: [-11,0...10] Parameter type: Format: ( disable | enable ) Possible values: - disable : disable the line probe - enable : enable the line probe Parameter type: Format: ( auto | tc-pam32 | tc-pam16 ) Possible values: - auto : auto-tcPam selection - tc-pam32 : tcPam32 selection - tc-pam16 : tcPam16 selection Parameter type: Format: ( auto | ieee | itu | not-applicable ) Possible values: - auto : auto select ieee/itu according to cpe - ieee : ieee 2base-tl - itu : itu-t g.991.2 ptm 64/65otc - not-applicable : not-applicable for atm/ima mode Parameter type: Format: ( span-level | link-level ) Possible values: - span-level : bonding rate control mode is span level
optional parameter with default value: 5696 the maximum requested data rate
[no] margin-down-worst
[no] margin-down-curr
[no] margin-up-worst
[no] margin-up-curr
[no] probe
[no] tc-pam-sele
[no] efm-hs-sele
[no] bonding-rate-mode
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: -11 target relative margin in dwnstrm for worst case noise optional parameter with default value: 5 relative margin in dwnstrm for current noise condition optional parameter with default value: -11 target relative margin in upstrm for worst case noise optional parameter with default value: 5 relative margin in upstrm for current noise conditions optional parameter with default value: "enable" the number enable/disable line probe
optional parameter with default value: "auto" the TC-PAM modulation selection for the span
optional parameter with default value: "not-applicable" the handshake mode selection for the span
optional parameter with default value: "span-level" the bonding rate control mode on the span
Released
623
29 SHDSL Configuration Commands
Parameter
Type
[no] min-rate-link1
[no] max-rate-link1
[no] min-rate-link2
[no] max-rate-link2
[no] min-rate-link3
[no] max-rate-link3
[no] min-rate-link4
[no] max-rate-link4
[no] tc-pam-link1
[no] tc-pam-link2
[no] tc-pam-link3
624
Description
- link-level : bonding rate control mode is span level Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: - bitrate - unit: kbits/sec Parameter type: Format: ( auto | tc-pam32 | tc-pam16 ) Possible values: - auto : auto-tcPam selection - tc-pam32 : tcPam32 selection - tc-pam16 : tcPam16 selection Parameter type: Format: ( auto | tc-pam32 | tc-pam16 ) Possible values: - auto : auto-tcPam selection - tc-pam32 : tcPam32 selection - tc-pam16 : tcPam16 selection Parameter type: Format: ( auto | tc-pam32 | tc-pam16 ) Possible values:
Released
optional parameter with default value: 192 the minimum requested data rate of link 1 optional parameter with default value: 5696 the maximum requested data rate of link 1 optional parameter with default value: 192 the minimum requested data rate of link 2 optional parameter with default value: 5696 the maximum requested data rate of link 2 optional parameter with default value: 192 the minimum requested data rate of link 3 optional parameter with default value: 5696 the maximum requested data rate of link 3 optional parameter with default value: 192 the minimum requested data rate of link 4 optional parameter with default value: 5696 the maximum requested data rate of link 4 optional parameter with default value: "auto" the TC-PAM modulation selection for the link 1
optional parameter with default value: "auto" the TC-PAM modulation selection for the link 2
optional parameter with default value: "auto" the TC-PAM modulation selection for the link 3
3HH-08079-DDAA-TCZZA
01
29 SHDSL Configuration Commands
Parameter
[no] tc-pam-link4
[no] ctc
3HH-08079-DDAA-TCZZA 01
Type - auto : auto-tcPam selection - tc-pam32 : tcPam32 selection - tc-pam16 : tcPam16 selection Parameter type: Format: ( auto | tc-pam32 | tc-pam16 ) Possible values: - auto : auto-tcPam selection - tc-pam32 : tcPam32 selection - tc-pam16 : tcPam16 selection Parameter type: Format: ( disable | enable ) Possible values: - disable : disable the cross-talk cancellation - enable : enable the cross-talk cancellation
Description
optional parameter with default value: "auto" the TC-PAM modulation selection for the link 4
optional parameter with default value: "disable" enable the cross-talk cancellation for the span
Released
625
29 SHDSL Configuration Commands
29.3 SHDSL Unit Configuration Command Command Description This command allows the operator to manage the SHDSL unit profile in one SHDSL span.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure shdsl unit (if-index) unit-id [ no loop-attenuation | loop-attenuation ] [ no snr-margin | snr-margin ] [ no loopback-timeout | loopback-timeout ]
Command Parameters Table 29.3-1 "SHDSL Unit Configuration Command" Resource Parameters Resource Identifier
Type
(if-index)
Format: interface index of the port / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Parameter type: unit identifier in an SHDSL span Format: ( stu-c | stu-r | sru-1 | sru-2 | sru-3 | sru-4 | sru-5 | sru-6 | sru-7 | sru-8 ) Possible values: - stu-c : the SHDSL unit is STU-C - stu-r : the SHDSL unit is STU-R - sru-1 : the SHDSL unit is SRU-1
unit-id
626
Released
Description
3HH-08079-DDAA-TCZZA
01
29 SHDSL Configuration Commands
Resource Identifier
Type
Description
- sru-2 : the SHDSL unit is SRU-2 - sru-3 : the SHDSL unit is SRU-3 - sru-4 : the SHDSL unit is SRU-4 - sru-5 : the SHDSL unit is SRU-5 - sru-6 : the SHDSL unit is SRU-6 - sru-7 : the SHDSL unit is SRU-7 - sru-8 : the SHDSL unit is SRU-8
Table 29.3-2 "SHDSL Unit Configuration Command" Command Parameters Parameter
Type
Description
[no] loop-attenuation
Parameter type: Format: - a loop attenuation threshold value for an SHDSL unit - unit: db - range: [0...127] Parameter type: Format: - an SNR margin threshold value for an SHDSL unit - unit: db - range: [0...15] Parameter type: Format: - a loopback timeout duration value for an SHDSL unit - unit: min - range: [0...4095]
optional parameter with default value: 0 the loop attenuation threshold value
[no] snr-margin
[no] loopback-timeout
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: 0 the snr margin threshold value optional parameter with default value: 0 the loopback timeout value
Released
627
29 SHDSL Configuration Commands
29.4 SHDSL Segment Configuration Command Command Description This command allows the operator to manage the SHDSL segment points on either sides of an SHDSL unit.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure shdsl segment (if-index) unit-id side [ no loopback | loopback ] [ no pbo-mode | pbo-mode ]
Command Parameters Table 29.4-1 "SHDSL Segment Configuration Command" Resource Parameters Resource Identifier
Type
(if-index)
Format: interface index of the port / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Parameter type: unit identifier in an SHDSL span Format: ( stu-c | stu-r | sru-1 | sru-2 | sru-3 | sru-4 | sru-5 | sru-6 | sru-7 | sru-8 ) Possible values: - stu-c : the SHDSL unit is STU-C - stu-r : the SHDSL unit is STU-R - sru-1 : the SHDSL unit is SRU-1 - sru-2 : the SHDSL unit is SRU-2
unit-id
628
Released
Description
3HH-08079-DDAA-TCZZA
01
29 SHDSL Configuration Commands
Resource Identifier
Type
side
- sru-3 : the SHDSL unit is SRU-3 - sru-4 : the SHDSL unit is SRU-4 - sru-5 : the SHDSL unit is SRU-5 - sru-6 : the SHDSL unit is SRU-6 - sru-7 : the SHDSL unit is SRU-7 - sru-8 : the SHDSL unit is SRU-8 Parameter type: Format: ( network | customer ) Possible values: - network : the network side - customer : the customer side
Description
the particular side of an SHDSL unit in an SHDSL segment
Table 29.4-2 "SHDSL Segment Configuration Command" Command Parameters Parameter
Type
Description
[no] loopback
Parameter type: Format: ( none | normal ) Possible values: - none : no loopback - normal : normal loopback Parameter type: Format: ( default | selected | disabled ) Possible values: - default : the default mode - selected : the selected mode - disabled : disable PBO
optional parameter with default value: "none" the loopback mode for the associated side
[no] pbo-mode
3HH-08079-DDAA-TCZZA 01
optional parameter with default value: "default" the power backoff mode for the associated side
Released
629
30- IMA Configuration Commands
30.1 IMA Configuration Command Tree 30.2 IMA Group Configuration Commands 30.3 IMA Link Configuration Commands
630
Released
30-631 30-632 30-634
3HH-08079-DDAA-TCZZA
01
30 IMA Configuration Commands
30.1 IMA Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "IMA Configuration Commands".
Command Tree ----configure ----ima ----group - (if-index) - [no] activate - [no] admin-up - [no] min-tx-links - [no] min-rx-links - near-end-ima-id ----[no] link - (link-if-index) - grp-index
3HH-08079-DDAA-TCZZA 01
Released
631
30 IMA Configuration Commands
30.2 IMA Group Configuration Commands Command Description This command allows the operator to manage the IMA group profile.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure ima group (if-index) [ [ no ] activate ] [ [ no ] admin-up ] [ no min-tx-links | min-tx-links ] [ no min-rx-links | min-rx-links ] [ near-end-ima-id ]
Command Parameters Table 30.2-1 "IMA Group Configuration Commands" Resource Parameters Resource Identifier
Type
(if-index)
Format: interface index of the port / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number
Description
Table 30.2-2 "IMA Group Configuration Commands" Command Parameters Parameter
Type
Description
[no] activate [no] admin-up
Parameter type: boolean Parameter type: boolean
[no] min-tx-links
Parameter type: Format: - a mininum number of transmit links required to be active - range: [1...8] Parameter type: Format: - a mininum number of receive links required to be active - range: [1...32] Parameter type: Format:
optional parameter optional parameter admin status is up optional parameter with default value: 1 the mininum number of transmit links optional parameter with default value: 1 the mininum number of receive links optional parameter the imd id used by the near-end
[no] min-rx-links
near-end-ima-id
632
Released
3HH-08079-DDAA-TCZZA
01
30 IMA Configuration Commands
Parameter
3HH-08079-DDAA-TCZZA 01
Type
Description
- an imd id used by the near-end ima function - range: [0...255]
ima function
Released
633
30 IMA Configuration Commands
30.3 IMA Link Configuration Commands Command Description This command allows the operator to manage the IMA link profile.
User Level The command can be accessed by operators with xdsl privileges, and executed by operators with xdsl privileges.
Command Syntax The command has the following syntax: > configure ima ( no link (link-if-index) ) | ( link (link-if-index) grp-index )
Command Parameters Table 30.3-1 "IMA Link Configuration Commands" Resource Parameters Resource Identifier
Type
(link-if-index)
Format: interface index of the port / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number
Description
Table 30.3-2 "IMA Link Configuration Commands" Command Parameters Parameter
Type
grp-index
Parameter type: mandatory parameter Format: logical interface number assigned / / / to this IMA grp Link Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number
634
Released
Description
3HH-08079-DDAA-TCZZA
01
31- L2CP Configuration Commands
31.1 L2CP Configuration Command Tree 31.2 L2CP Configuration Command 31.3 L2CP Session Configuration Command 31.4 L2CP User Port Partition Configuration Command
3HH-08079-DDAA-TCZZA 01
31-636 31-637 31-638 31-641
Released
635
31 L2CP Configuration Commands
31.1 L2CP Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "L2CP Configuration Commands".
Command Tree ----configure ----l2cp - [no] partition-type ----[no] session - (index) - bras-ip-address - [no] gsmp-version - [no] gsmp-sub-version - [no] encap-type - [no] topo-discovery - [no] layer2-oam - [no] alive-timer - [no] port-reprt-shaper - [no] aggr-reprt-shaper - [no] tcp-retry-time - [no] gsmp-retry-time - [no] dslam-name - [no] partition-id - [no] window-size - [no] tcp-port - [no] router-instance - [no] sig-partition-id ----[no] user-port - (user-port) - partition-id
636
Released
3HH-08079-DDAA-TCZZA
01
31 L2CP Configuration Commands
31.2 L2CP Configuration Command Command Description This command allows the operator to configure the L2CP parameters.
User Level The command can be accessed by operators with transport privileges, and executed by operators with transport privileges.
Command Syntax The command has the following syntax: > configure l2cp [ no partition-type | partition-type ]
Command Parameters Table 31.2-2 "L2CP Configuration Command" Command Parameters Parameter
Type
Description
[no] partition-type
Parameter type: Format: ( no-partition | fixed-assigned ) Possible values: - no-partition : no partitioning is supported - fixed-assigned : partitioning is supported
optional parameter with default value: "no-partition" partition type
3HH-08079-DDAA-TCZZA 01
Released
637
31 L2CP Configuration Commands
31.3 L2CP Session Configuration Command Command Description This command allows the operator to configure the L2CP session parameters for a given session id. In current version, ISAM supports L2CP only on top of TCP/IP; as result of this command, ISAM shall start a TCP connection to a BRAS identified by a configured IP address. Then depending on the setting of the GSMP Retry Timer, the ISAM shall start the GSMP Adjacency Protocol to setup a L2CP session with that BRAS. This means: • if TCP Retry Timer is zero, ISAM shall not start the TCP connection. If TCP Retry Timer is not zero, ISAM shall start the setup of a TCP connection to a BRAS whose IP address must be configured too. In no way the ISAM accepts that a (unknown) BRAS tries to start a TCP connection • if GSMP Retry Timer is zero, ISAM shall not start the GSMP Adjacency Protocol but instead be prepared to handle GSMP Adjacency Protocol messages from that BRAS. If GSMP Retry Timer is not zero, ISAM shall start the GSMP Adjacency Protocol in addition to being prepared to handle GSMP Adjacency Protocol messages from that BRAS
User Level The command can be accessed by operators with transport privileges, and executed by operators with transport privileges.
Command Syntax The command has the following syntax: > configure l2cp ( no session (index) ) | ( session (index) bras-ip-address [ no gsmp-version | gsmp-version ] [ no gsmp-sub-version | gsmp-sub-version ] [ no encap-type | encap-type ] [ no topo-discovery | topo-discovery ] [ no layer2-oam | layer2-oam ] [ no alive-timer | alive-timer ] [ no port-reprt-shaper | port-reprt-shaper ] [ no aggr-reprt-shaper | aggr-reprt-shaper ] [ no tcp-retry-time | tcp-retry-time ] [ no gsmp-retry-time | gsmp-retry-time ] [ no dslam-name | dslam-name ] [ no partition-id | partition-id ] [ no window-size | window-size ] [ no tcp-port | tcp-port ] [ no router-instance | router-instance ] [ [ no ] sig-partition-id ] )
Command Parameters Table 31.3-1 "L2CP Session Configuration Command" Resource Parameters Resource Identifier
Type
Description
(index)
Format: - identity of the l2cp session - range: [1...255]
index to the l2cp session table
Table 31.3-2 "L2CP Session Configuration Command" Command Parameters
638
Released
3HH-08079-DDAA-TCZZA
01
31 L2CP Configuration Commands
Parameter
Type
Description
bras-ip-address
Parameter type: Format: - IPv4-address
[no] gsmp-version
Parameter type: Format: - version of the GSMP protocol - range: [3]
[no] gsmp-sub-version
Parameter type: Format: - sub version of the GSMP protocol - range: [1]
[no] encap-type
mandatory parameter The parameter is not visible during modification. IPv4 address used for the L2cp session peer optional parameter with default value: 3 The parameter is not visible during modification. version of gsmp protocol optional parameter with default value: 1 The parameter is not visible during modification. sub version of gsmp protocol optional parameter with default value: "tcp" The parameter is not visible during modification. encapsulation type optional parameter with default value: "enabled" The parameter is not visible during modification. topology discovery capability
Parameter type: Format: tcp Possible values: - tcp : tcp encapsulation type Parameter type: Format: ( disabled | enabled ) Possible values: - disabled : no topology discovery - enabled : topology discovery Parameter type: optional parameter with default Format: value: "enabled" ( disabled The parameter is not visible | enabled ) during modification. Possible values: layer2 OAM is supported - disabled : no layer2 oam - enabled : layer2 oam Parameter type: optional parameter with default Format: value: 250 - adjacency protocol watchdog alive time adjacency protocol watchdog - unit: 100 msec alive time. - range: [1...255] Parameter type: optional parameter with default Format: value: 10 - time between two EventReport msgs related to same port, The parameter is not visible should be >= aggr-reprt-shaper during modification. - unit: 100 msec time between 2 EventReport - range: [1...255] msgs on the same port, should be >= aggr-reprt-shaper Parameter type: optional parameter with default Format: value: 10 - time between two EventReport msgs related to any port The parameter is not visible - unit: 10 msec during modification. - range: [1...2550] time between 2 EventReport msgs on any port Parameter type: optional parameter with default Format: value: 10 - time between 2 TCP connection setup attempts. time between 2 TCP connection - unit: 100 msec setup attempts - range: [0...255]
[no] topo-discovery
[no] layer2-oam
[no] alive-timer
[no] port-reprt-shaper
[no] aggr-reprt-shaper
[no] tcp-retry-time
3HH-08079-DDAA-TCZZA 01
Released
639
31 L2CP Configuration Commands
Parameter
Type
Description
[no] gsmp-retry-time
Parameter type: Format: - time between 2 GSMP/L2CP connection setup attempts. - unit: 100 msec - range: [0...255] Parameter type: Format: - a mac-address (example : 01:02:03:04:05:06) - length: 6
optional parameter with default value: 10 time between 2 GSMP/L2CP connection setup attempts
[no] dslam-name
optional parameter with default value: "00 : 00 : 00 : 00 : 00 : 00" The parameter is not visible during modification. l2cp name of the DSLAM Parameter type: optional parameter with default Format: value: 0 - partition id The parameter is not visible - range: [0...127] during modification. identity for this session's specific DSLAM partition Parameter type: optional parameter with default Format: value: 10 - max no.of unacknow req msgs to be transmtted in a The parameter is not visible window during modification. - range: [10] max no.of unacknow req msgs to be transmtted in a window Parameter type: optional parameter with default Format: value: 6068 - tcp port number The parameter is not visible - range: [0...65535] during modification. tcp port number of the session established to the peer. Parameter type: optional parameter with default Format: value: "base" ( base The parameter is not visible | vpls-management during modification. | ) router-instance to be used to Possible values: obtain connectivity to the peer. - base : base router - vpls-management : vpls-management router Field type - vprn service-id - range: [1...2147483646] Parameter type: boolean optional parameter The parameter is not visible during modification. indicates if partition ID is signalled
[no] partition-id
[no] window-size
[no] tcp-port
[no] router-instance
[no] sig-partition-id
640
Released
3HH-08079-DDAA-TCZZA
01
31 L2CP Configuration Commands
31.4 L2CP User Port Partition Configuration Command Command Description This command allows the operator to configure the partition id for the given user-port.
User Level The command can be accessed by operators with transport privileges, and executed by operators with transport privileges.
Command Syntax The command has the following syntax: > configure l2cp ( no user-port (user-port) partition-id ) | ( user-port (user-port) partition-id )
Command Parameters Table 31.4-1 "L2CP User Port Partition Configuration Command" Resource Parameters Resource Identifier
Type
(user-port)
Format: interface index of the port / / / Field type - the rack number Field type - the shelf number Field type - the LT slot number Field type - the port number Parameter type: partition id Format: - partition id - range: [1...127]
partition-id
3HH-08079-DDAA-TCZZA 01
Description
Released
641
32- Voice Configuration Commands
32.1 Voice Configuration Command Tree 32.2 Voice Sip Server Configuration Commands 32.3 Voice Sip LineId Syntax Profile Configuration Commands 32.4 Voice Sip User Agent Configuration Commands 32.5 Sip Voice Service Provider Configuration Commands 32.6 Voice Sip User Agent Access Point Configuration Command 32.7 Voice Sip Dial Plan Configuration Commands 32.8 Voice Sip Dial Plan Digitmap Configuration Commands 32.9 Voice Sip Termination Configuration Commands 32.10 Voice Sip Termination TCA Threshold Configuration Command 32.11 Sip Voice Register Configuration Commands 32.12 Voice Sip Transport Configuration Commands 32.13 Voice Sip Redundancy Table Configuration Commands 32.14 Voice Sip System Session Timer Configuration Commands 32.15 Voice Sip DNS Server Configuration Commands 32.16 Voice Sip DHCP Authentication Params Configuration Commands 32.17 manage restoration Failover/Failback type/mode 32.18 Voice Cluster Configuration Commands 32.19 Voice Megaco IP Configuration Commands 32.20 Voice Megaco Equipment Configuration Commands 32.21 Voice Megaco Equipment Board Configuration Commands 32.22 Voice Megaco Equipment Termination Configuration Commands 32.23 Voice Megaco Media Gateway Configuration Commands 32.24 Voice Megaco Signal Gateway Configuration Commands
642
Released
32-643 32-648 32-651 32-653 32-656 32-661 32-663 32-664 32-665 32-667 32-669 32-671 32-673 32-676 32-678 32-680 32-682 32-683 32-684 32-686 32-688 32-690 32-694 32-704
3HH-08079-DDAA-TCZZA
01
32 Voice Configuration Commands
32.1 Voice Configuration Command Tree Description This chapter gives an overview of nodes that are handled by "Voice Configuration Commands".
Command Tree ----configure ----voice ----sip ----[no] server - (name) - [no] admin-status - address - [no] port - [no] server-role - [no] priority - [no] weight - [no] site - [no] transproto - [no] dnsname-type - admin-domain-name ----lineid-syn-prof - (name) - [no] syntax-pattern - [no] pots-syntax ----[no] user-agent - (name) - [no] ip-addr-policy - [no] ip-config-mode - [no] signal-gateway-ip - signal-vlan-id - [no] signal-dscp - [no] signal-pbits - [no] signal-link-mtu - [no] rtp-gateway-ip - rtp-vlan-id - [no] rtp-dscp - [no] rtp-pbits - [no] rtp-link-mtu - [no] dhcp-optreq-list - [no] admin-status ----vsp - (name) - [no] domain-name - [no] admin-status - [no] tinfo - [no] ta4 - [no] ttir1 - [no] t-acm-delta - [no] access-held-time - [no] awaiting-time
3HH-08079-DDAA-TCZZA 01
Released
643
32 Voice Configuration Commands
- [no] digit-send-mode - [no] overlap-484-act - [no] dmpm-intdgt-expid - [no] dial-start-timer - [no] dial-long-timer - [no] dial-short-timer - [no] uri-type - [no] rfc2833-pl-type - [no] rfc2833-process - [no] min-data-jitter - [no] init-data-jitter - [no] max-data-jitter - [no] release-mode - [no] dyn-pt-nego-type - [no] vbd-g711a-pl-type - [no] vbd-g711u-pl-type - [no] vbd-mode - [no] timer-b - [no] timer-f - [no] timer-t1 - [no] timer-t2 ----user-agent-ap - (ua-name) - slot-id - signal-ip - rtp-ip - [no] dhcp-fqdn - [no] admin-status ----[no] dialplan - (name) - [no] pre-activated - [no] static-prefix - [no] static-suffix ----[no] digitmap - (name) - type - rule - [no] access-type ----[no] termination - (if-index) - [no] directory-number - [no] user-name - [no] display-name - [no] uri - [no] direct-uri - [no] line-feed - [no] md5-realm - [no] md5-password - [no] admin-status - [no] clip-mode - [no] anti-tapping ----tca - [no] enable - [no] high-jbfl - [no] low-jbfl ----register - (provider-name) - [no] register-uri - [no] register-intv
644
Released
3HH-08079-DDAA-TCZZA
01
32 Voice Configuration Commands
- [no] reg-retry-intv - [no] reg-prev-ava-intv - [no] reg-head-start - [no] reg-start-min ----[no] transport - (trans-protocol) - provider-name - [no] admin-status - [no] port-rcv - [no] tcp-idle-time - [no] max-out-udp-size ----redundancy - (admin-domain-name) - [no] support-redun - [no] dns-purge-timer - [no] dns-ini-retr-int - [no] dns-max-retr-nbr - [no] fg-monitor-method - [no] fg-monitor-int - [no] bg-monitor-method - [no] bg-monitor-int - [no] stable-obs-period - [no] fo-hystersis - [no] del-upd-threshold - [no] auto-server-fo - [no] auto-server-fb - [no] auto-sos-fo - [no] auto-sos-fb - [no] rtry-after-thrsh ----system ----session-timer - [no] enable - [no] min-se-time - [no] se-time - [no] admin-status ----[no] dnsserver - (name) - [no] admin-status - address - [no] priority - [no] site - admin-domain-name - [no] port ----[no] dhcp-authent-para - (ua-name) - secret-id - [no] key - [no] action-type ----redundancy-cmd - (domain-name) - [no] start-time - [no] end-time - fail-x-type ----cluster - (cluster-id) ----ip - ivps-ip - netmask - router-ip
3HH-08079-DDAA-TCZZA 01
Released
645
32 Voice Configuration Commands
- vlan-id - [no] private-ip - [no] private-netmask - [no] private-vlan-id ----[no] equipment - (equip-id) - asam-id - ip-address - [no] next-hop ----[no] board - (board-id) - planned-type - lanx-port ----[no] termination - (port-id) - [no] type - [no] switch-type - [no] activate-type - termination-id - media-gateway-id - [no] admin-status - [no] line-feed - [no] impedance - [no] rtp-dscp - [no] rtp-pbits - [no] clip-mode - [no] metering-type - [no] directory-number ----[no] media-gateway - (media-gateway-id) - [no] name - ip-address - netmask - [no] udp-port - [no] router-ip - vlan-id - [no] mgc-type - prim-mgc-ip - [no] mgc-id - [no] prim-mgc-udp - [no] sec-mgc-ip - [no] sec-mgc-udp - [no] tert-mgc-ip - [no] tert-mgc-udp - [no] mg-mid-type - [no] mg-domain-name - [no] svcreason-format - [no] mg-profile-name - [no] admin-status - termid-type - pstn-term-format - isdn-term-format - isdn-suffix1 - isdn-suffix2 - [no] max-transhandling - [no] max-network-delay - [no] max-retrans - [no] red-bat-delay
646
Released
3HH-08079-DDAA-TCZZA
01
32 Voice Configuration Commands
- [no] release-delay - [no] release-type - [no] wt-rls-delay - [no] active-heartbeat - [no] passive-heartbeat - [no] retrans - [no] max-waiting-delay - [no] prov-rpl-time - [no] signal-dscp - [no] signal-pbits - [no] rtp-dscp - [no] rtp-pbits - [no] event-req-id - [no] stml-stdsg-evt - [no] al-of-evt - [no] al-on-evt - [no] al-of-strict-evt - [no] al-on-strict-evt - [no] mg-overload-evt - [no] rfc2833-pl-type - [no] rfc2833-process - [no] dial-start-timer - [no] dial-long-timer - [no] dial-short-timer - [no] min-data-jitter - [no] init-data-jitter - [no] max-data-jitter - [no] ephe-term-prefix - [no] ephe-term-min - [no] ephe-term-max ----[no] signal-gateway - (signal-gateway-id) - prim-asp-ip - prim-sctp-port - sec-asp-ip - [no] sec-sctp-port - tert-asp-ip - [no] tert-sctp-port - ip-address - sgi-user-label - sgi-mgi - [no] admin-status
3HH-08079-DDAA-TCZZA 01
Released
647
32 Voice Configuration Commands
32.2 Voice Sip Server Configuration Commands Command Description This command allows the operator to manage the Voice Sip Server profile.
User Level The command can be accessed by operators with sip privileges, and executed by operators with sip privileges.
Command Syntax The command has the following syntax: > configure voice sip ( no server (name) ) | ( server (name) [ no admin-status | admin-status ] address [ no port | port ] [ no server-role | server-role ] [ no priority | priority ] [ no weight | weight ] [ no site | site ] [ no transproto | transproto ] [ no dnsname-type | dnsname-type ] admin-domain-name )
Command Parameters Table 32.2-1 "Voice Sip Server Configuration Commands" Resource Parameters Resource Identifier
Type
Description
(name)
Format: - uniquely identifies this voice server - length: x
View more...
Comments
