3D-07-13F1-129_SP3D Operator Training Guide _Lab2 System Hierarchy Setting_EN_Rev0_WATERMARK

Job Code Doc. No.

6-1720-10-0000 3D-07-13F1-129

SP3D Operation Training Guide

Lab 2: System Hierarchy Setting

3D ENGINEERING PROPULSION GROUP

REV 0

DATE 01/May/’09

REASON FOR ISSUE 1st Issue

PREP’D D.Iwata

CHK’D T.Hayami

APR’D T.Hayami

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

1 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

Lab:2 System Hierarchy Setting Training 1 

OUTLINE .......................................................................................................................................................... 3  1.1 

2 

Configure the System Hierarchy ............................................................................................................... 3 

CONFIGURE OF SYSTEM HIERARCHY ........................................................................................................ 4  2.1  2.2 

Configure the system hierarchy manually ................................................................................................. 4  Creating System Hierarchy by importing Excel data ................................................................................. 6 

2.2.1  Preparing the Excel file .................................................................................................................... 6  2.2.2  Import the System Hierarchy .......................................................................................................... 7  2.3  Creating Pipeline System by importing Excel data ................................................................................... 9  2.3.1  Preparing the Excel file .................................................................................................................... 9  2.3.2  Import the Pipeline System ........................................................................................................... 11  2.3.3  Move the Pipeline System and edit the System Hierarchy. ........................................................ 12 

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

2 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

1

OUTLINE

1.1

Configure the System Hierarchy

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

System Hierarchy is the folder definition and arrangement of the Plant or Project. The Hierarchy is used to group the objects according to discipline or area/unit during modeling on SP3D. Moreover, when we want to refer to the other discipline's object, if it is hard to recognize where the object is modeled in the hierarchy, it would impede the project execution, so the hierarchy should not be deep to understand easily. This training will help you set up the System Hierarchy. The System Hierarchy appears on SP3D like Explorer of Windows, which is called Workspace Explorer. To organize the Objects on SP3D, you need to have a System Hierarchy set up in advance. One of the administrators must set up the System Hierarchy, where all users can refer to the Hierarchy. There are two ways to create System Hierarchy. One is to create manually on SP3D, and the other way is to import Excel sheet wherein a template is used to define the Hierarchy setting.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

3 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

2

CONFIGURE OF SYSTEM HIERARCHY

2.1

Configure the system hierarchy manually

6-1720-10-0000 3D-07-13F1-129

(1) Start up SmartPlant 3D (2) Set the Work Space using Define Work Space command. (3) Click Task ＞ Systems and Specifications.

(4) Select the Plant on the left side of the Explorer. Click down-arrow button

on the Tool bar and select New Generic System from the type list.

(5) New Generic System will be added on the list, and then double click on the name and change it to ‘JGC_Training’.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

4 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

(6) After creating ‘JGC_Training’ hierarchy, create different types of hierarchies under this hierarchy. •

Generic System

•

Conduit System

•

HVAC System

•

Electrical System

•

Equipment System

•

Piping System

•

Pipeline System

•

Structure System

•

Unit System

•

Area System

Example

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

5 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

2.2

Creating System Hierarchy by importing Excel data

2.2.1

Preparing the Excel file

6-1720-10-0000 3D-07-13F1-129

When SP3D is installed in your PC, a sample data is included, located at the following folders. Copy the sample file and rename. C:¥Program Files¥SmartPlant¥3D¥SystemsAndSpecs¥Import¥ImportData_Sample.xls

Referring to the sample input the Hierarchy configuration on SYSTEM_HIERARCHY sheet.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

6 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

2.2.2

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

Import the System Hierarchy (1) Start up SmartPlant 3D (2) Set the Work Space using Define Work Space command. (3) Click Task ＞ Systems and Specifications.

(4) Click Tools ＞ Import Systems Hierarchy from Excel.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

7 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

(5) Set the Excel file to import and select a destination for the log file. And then click ‘Import’ button.

1

2

4 3

(6) After importing, click the ‘Finish’ button. (7) System hierarchy from Excel file is imported as in the following example.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

8 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

2.3

Creating Pipeline System by importing Excel data

2.3.1

Preparing the Excel file

6-1720-10-0000 3D-07-13F1-129

Creating Pipeline System Hierarchy is somewhat similar to 2.2.1 Preparing the Excel file. In the case of JGC SP3D modeling environment, it is supposed to use SPPID (SmartPlant P&ID) and SPI (SmarPlant Instrumentation) interface. The hierarchy must be defined as 【Plant System】＞【Area System】＞【Unit System】 (P･A･U) by SPI constraints, and then set the Pipeline System under the Unit System. However, using the Import method, we can only import Pipeline System under a Piping System only. As a workaround, we must create a Piping System and a dummy Unit System. For the Piping System, name it same as the Unit name (e.g. 021, 031, 051). And for the Unit System, use the same name but add a dummy character to distinguish it from the Piping System. After Import is finished, just move the Pipeline Systems that were created under the Piping System to the dummy Unit Systems. Delete the empty Piping Systems and then rename the Unit Systems to the correct Unit Name.

(1) In SYSTEM_HIERARCHY sheet, input the Piping System and Unit System, with their respective Unit names as shown below.

Piping System where the Pipeline will be imported Unit Name +Dummy Unit System

Piping System where the Pipeline will be imported Unit Name +Dummy Unit System

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

9 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

(2) Create a new sheet and rename it with the same Piping System name which you defined in the SYSTEM_HIERARCHY sheet.

Parent System should be same as sheet name.

Sheet name should be the same as Piping System to be imported.

※Caution Piping Spec can be defined at the same time as Pipeline System. This means that only the specified Piping Spec may be used for that specific Pipeline System. If you use several Piping Specs, leave this column blank.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

10 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

2.3.2

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

Import the Pipeline System (1) Start up SmartPlant 3D (2) Set the Work Space using Define Work Space command. (3) Click Task ＞ Systems and Specifications.

(4) Click Tools ＞ Import Systems Hierarchy from Excel.

(5) Set the Excel file to import and select a destination for the log file. And then click ‘Import’ button.

1

2

4 3

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

11 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

(6) After importing, click the ‘Finish’ button. (7) Pipeline System hierarchy from Excel file is imported as in the following example.

2.3.3

Move the Pipeline System and edit the System Hierarchy. Move all Pipeline System from Piping System to Unit System Hierarchy. (1) Select Pipeline System and click Property button.

2

1

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

12 of 13

3D ENGINEERING PROPULSION GROUP SP3D Operator Training Guide

Job Code: Doc. No.:

6-1720-10-0000 3D-07-13F1-129

(2) Select the equivalent dummy Unit System for Parent System and click OK button.

(3) There is no pipeline under the Piping System hierarchy, so right click the unnecessary Piping System and click Delete button.

(4) Select dummy Unit System and open Properties and then rename to the correct Unit name.

(5) Repeat the above steps to move all the other Pipeline System to its appropriate Unit System.

3D-07-13F1-129_SP3D Operator Training Guide (Lab2 System Hierarchy Setting)EN.doc Copyright 2007 by JGC Corporation ALL Rights Reserved

13 of 13