345591204 Soal Mikrotik Exam

1. For static routing functionality, additionally to the RouterOS ‘system’ package you will also need the following software package : A. No extra package Required B. dhcp C. routing D. advanced-tools JAWAB : A

2. In RouterOS queue configurations the word “total” ussually represents

A. download B. upload + download C. download - upload D. upload

3. Domain name system (DNS) requests can use protocol/port : UDP and TCP port 53 4. When sending out an ARP request, an IP host is expecting what kind of address for an answer? A. VLAN ID B. IP address C. MAC Address D. 802.11g

5. Which port does PPTP use by default ? PPTP traffic uses TCP port 1723 and IP protocol GRE (Generic Routing Encapsulation, IP protocol ID 47) 6. Which options can be used when you want to prevent access form one specific address to your router web interfance ? Firewall Filter chain input 7. Which firewall chain should you use to filter ICMP packets from the router itself ? a.postrouting b.foward c.input d.output 8. Netinstall can be used to: A. Keep configuration, but reset a lost admin password B. Install package for different hardware architecture C. Install different software version (upgrade or downgrade) D. Reinstall software without losing licence

9. Mark all the feauture that can be used for limiting client registrations to your access point : Access-list 10. You can control bandwidth of a client connected to AP with theresource /i nterface wireless acess-list (assume the client uses mikrotik RouterOS) TRUE 11. To set up masquerading of the network 192.168.0.0/24, configured on the interface ether1, you should add rule ? A. /ip firewall nat add action=masquerade chain=srcnat B. /ip firewall nat add action=masquerade chain=srcnat src-address=192.168.0.0/24 C. /ip firewall nat add action=masquerade out-interface=ether1 chain=dstnat D. /ip firewall nat add action=masquerade chain=srcnat out-interface=ether1 12. What is the meaning of the status letter “R” on a PpoE client interface in RoterOS interfaces menu ? a.Running b.Radius c.Remote 13. PpoE server only works within one Ethernet broadcast domain that it is connected to. If there is a router between server and end-user host, it will not be able to create PpoE tunnel to that PpoE server FALSE 14. What is necessary for PpoE client configuration ? A.ip firewall nat masquerade rule B. Interface (on which PPPoE client is going to work) C. Static IP address on PPPoE client interface 15. When using routing option ‘check-gateway=ping’ what is the ICMP echo request interval (in second) ? A. 60s B. 20s C. 30s D.10s

16. What can be used as ‘Target’ in the simple queue? a. Client ip address b. Server ip address c.

Address list name

d. Client mac address 17. What does the simple queue do (check the image) ? A. Queue guarantees download data rate of one megabit per second for host 192.168.1.10 B. Queue limits host 192.168.1.10 upload data rate to one megabit per second. C. Queue guarantees upload data rate of one megabit per second for host 192.168.1.10 D. Queue limits host 192.168.1.10 download data rate to one megabit per second.

18. What is the default protocol/port of (secure) winbox ? A. UDP/5678 B. TCP/8291 C. TCP/22 D. TCP/8080 19. Mikrotik RouterOS commands can be run once a day by ? A. /system cron B. /system watchdog C. /system scheduler 20. Mark correct answer for action=dstnat in chain=dst nat. a.Change destination address and port b.Add destination address to address-list c.Nat source address d.Change source address and port 21. /ip route configuration on router, /ip route add gateway=192.168.0.1 /ip route add dst-address=192.168.1.0/24 gateway=192.168.0.2 /ip route add dst-address=192.168.2.0/24 gateway=192.168.0.3 /ip route add dst-address=192.168.3.0/26 gateway=192.168.0.4 Router needs to send packets to 192.168.3.240. Which gateway will be used? A. 192.168.0.2 B. 192.168.0.3 C. 192.168.0.4 D. 192.168.0.1

22. Which option in the configution=ration of a wireless card must be disabled to cause the router to permit ONLY known clients listed in the access list to connect? a.enable access list b.security profile c.default foward d.default authenticate 23. What kind of users are listed in the “/user ” menu ? A. pptp users B. hotspot users C. router users D. wireless users 24. A client that has successfully connected to a wireless network is considered to be which of the following? Choose all that apply : A. Authenticated B. Associated C. Unauthenticated D. Unassociated 25. DHCP server is configured on router ether1 interface. IP address 192.168.0.100/24 is assigned to the interface. Correct IP pool configuration that can be used by this DHCP server is : a. 192.168.0.1-192.168.0.255 b. 192.169.0.1-192.169.0.254 c. 192.168.0.1-192.168.0.14 d. 192.168.0.1-192.168.0.99,192.168.0.101-192.168.0.254

https://vannda.wordpress.com/mtcna/

https://lifeisrouting.blogspot.co.id/p/set-1-1.html http://imanirvansyaah124.blogspot.co.id/2016/08/mtcna-jawaban.html http://soalterbaru.blogspot.co.id/2012/07/soal-dan-jawaban-soal-mtcna-terbaru.html http://imanirvansyaah124.blogspot.co.id/2016/09/latihan-soal-mtcre-penjelasan.html https://www.slideshare.net/byronfabian/mexamen-mtcna-110817-puerto-rico https://soaljarkom.blogspot.co.id/ http://yaskurrafii.blogspot.co.id/2016/08/soal-soal-mtcna-beserta-jawabannya.html http://achya15.blogspot.co.id/2015/10/conto-soal-ujian-mtcna.html http://soalterbaru.blogspot.co.id/2012/07/soal-dan-jawaban-soal-mtcna-terbaru.html