21.Amphenol Jaybeam Product Catalogue - Europe, Africa and Middle East

Amphenol Telecom Solutions

Antennas Combiners Tower Mount Amplifiers Lightning Arresters Coaxial Connectors Coaxial & Feeder Cable Base Station Accessories Networking Products Fibre Optic Products V090601

Amphenol Telecom Solutions - Table of Contents Amphenol Introduction & Contact Information

ii

Amphenol Telecom Solutions – Product Overview

Section A

Antennas

Section B

Coaxial Interconnects

Section C

Coaxial Cable

Section D

Jumper Cable Assemblies

Section E

Accessories for Telecommunication Applications

Section F

Assembly & Installation Instructions

Section G

Fibre Optic Products

Section H

Data / Networking Products

Section I

Glossary

Section J

ii

Amphenol Telecom Solutions Introduction to Amphenol Corporation Amphenol was founded in 1932. The company is one of the largest manufacturers of interconnect products in the world. The company designs, manufactures and markets electrical, electronic and fibre optic connectors, interconnect systems and coaxial and flat-ribbon cable. Its activities are geared towards 7 major markets: Aerospace / Military, Automotive, Broadband Communication, Industrial, Internet Equipment, Mobile Phones and Wireless Infrastructure. Amphenol is headquartered in Connecticut, USA and employs more than 28,000 people on a worldwide basis with manufacturing and assembly operations in the Americas, Europe and Asia.

Amphenol’s Contribution to Telecom Networks Amphenol is a leading global interconnect solutions provider to the wireless infrastructure market including applications such as cellular base stations, radio links, mobile switches, wireless routers, wireless local loop and cellsite antenna systems, combiners, transceivers, filters and amplifiers. Amphenol offers a wide product portfolio for every wireless standard and generation radio technology including 2.5G, 3G, WiMAX and future IP solutions. The product range includes RF, low frequency, power and fiber-optic connectors and cable assemblies, antennas, backplane interconnect systems and power distribution systems. This catalog details the most commonly used products for telecom networks. Should you require a product which is not listed in the catalog, please forward your request to Amphenol.

Notice Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all products.

Contact Amphenol Jaybeam Rutherford Drive, Park Farm South Wellingborough, Northamptonshire, NN8 6AX England

Tel: +44 (0) 1933 408 408 Fax: +44 (0) 1933 408 404 Email: [email protected] Web: www.amphenol-jaybeam.com

Page ii

Amphenol Telecom Solutions Amphenol Telecom Solutions – Product Overview Where Can Amphenol Service Your Requirements? Antennas

Amphenol is the only company that supports the entire interconnect requirements of a cellular infrastructure system. From high-speed backplane interconnect solutions to antenna, RF, fibre optic and power products, the vast majority of base stations are enabled by our interconnection technology.

Section B Indoor Antennas

Section B Microwave Antennas

Contact Amphenol Coaxial Connectors

Coaxial Cable

Pre-assembled Jumpers, Feeders and Cable Assemblies

Section C

Section D

Section E

Lightning Arresters

Earthing Kits

Cable Clamps

Section F

Section F

Section F A-1

Amphenol Telecom Solutions Amphenol Telecom Solutions – Product Overview – Continued Splitters & Couplers

Combiners – Dual-band & Tri-band

Tower Mount Amplifiers (TMA)

Section F

Section F

Section F

Power Distribution Units for TMAs

Gland Plates & Grounding Bars

Lugs

Section F

Section F

Section F

Consumables

Calibration Kits

Tools

Section F

Section F

Section F

Fibre Optic Products

IP67 Ethernet Connectors

Infiniband

Section H

Section I

Section I

(AISG) Antenna Interface Standards Group Connectors & Cable Assemblies

Backplane Systems

Busbars

Contact Amphenol

Contact Amphenol

Contact Amphenol

Filtered Terminal Blocks and Headers

Quick Connect Jumpers

Systems Integration TCS

Contact Amphenol

Contact Amphenol

Contact Amphenol

A-2

Amphenol

Antennas

Telecom Solutions

- Table of Contents Amphenol Antenna Solutions

Page B1

Product Overview - Cellular Base Station Antennas - Embedded Amplifier Antennas - In-Building / Microcell Antennas - Tri -Sector Ante nna Solutions – UNICEL & TRIO - UHF & VHF Base Station Antennas - Marine Antennas - Camouflage Solutions

Amphenol Jaybeam SmartTilt™

- Remote Electrical Tilt Technology

Pages B1 – B4

Pages B5 – B6

Cellular Antennas

Pages B15 – B68

PMR Antennas

Pages B69 – B196

Miniature Antennas - Whip Antenna for GSM/AMPS/ETACS - Whip Antenna for GSM - Short Whip Antenna for GSM/AMPS/ETACS - Swivel Antenna 45°~90° for GSM/DCS - Swivel Antenna 45°~90° for WiF i/Blue - Swivel Antenna 45°~90° 433/868MHz - Flat Antenna for GSM/DCS - Cling -On for GSM/DCS - Mini Me External Stubby for GSM/DCS - GPS Antenna Active Antenna - Mini GPS Dielectric Patch Antenna - Enterprise GPS/GSM Antenna - GPS/GSM Alternat e Packaged Antennas

Pages B197 – B200

Notice Specifications are subject to change without notice. Contact your nearest Ampheno l Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, w arranty, or responsibility of any kind expressed or implied. Stateme nts or suggestions concerning possible use of our products are made without representation or warranty that any such use is f ree of patent infringement and are not recommendations to infringe any patent. The user should not assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all products.

Amphenol Telecom Solutions Amphenol Antenna Solutions Amphenol Antenna Solutions Product Range

 450 MHz CDMA

 1900 MHz PCS

 WCDMA & CDMA2000

 Environment Decorations

 800 MHz CDMA

 1920-2170 MHz WCDMA

 TD-SCDMA Smart Antennas

 In-building Antennas

 2.4 GHz WIMAX

 MIMO

 3.5 GHz WIMAX

 Beamforming

 5.7 GHz WIMAX

 Dual-Band & Tri-Band Series

 900 MHz GSM  806-960 MHz Broadband  1800 MHz DCS

 1710-2170 MHz Multi-Band & UMTS  1710-2170 MHz Broadband & GSM  GSM and CDMA VET

Product Overview Cellular Base Station Antennas Amphenol Antenna Solutions has been supplying base station antennas into the cellular market for nearly 20 years. In that time our product portfolio has grown to serve customers operating in the 700 MHz, Cellular 850 MHz, GSM 900 MHz, IDEN, GSM 1800 MHz, PCS 1900 MHz, UMTS 2100 MHz, AWS and 2500 WiMAX frequency bands. Amphenol Antenna Solutions offers a broad range of base station antenna models in indoor, point-to-point, sectorized panel and omni directional configurations. Our high performance antennas are field proven by network operators worldwide to deliver reliable communications in harsh tower top environments. Amphenol Antenna Solutions offers a wide selection of gains, azimuth beamwiths and electrical downtilts to give RF engineers the tools they need for network optimization. Innovative Wideband, Dual-Band and Tri-Band antenna solutions are also available to allow deployment of multiple networks in existing tower space with minimum visual impact to the community. In addition to antennas, Amphenol Antenna Solutions has established expertise in tri-sector antenna structures, tower top electronics and Remote Electrical Tilt (RET) technology. This depth of experience allows Amphenol Antenna Solutions engineers to develop highly sophisticated site solutions to support challenging network requirements. To search on-line for Cellular Base Station antennas: http://www.amphenol-jaybeam.com

Product Overview – Continued Embedded Amplifier Antennas Amphenol Antenna Solutions has pioneered the development of embedded amplifier technology for base station antennas. Rather than simply re-packaging an existing Tower Mounted Amplifier (TMA), our engineers were encouraged to reconsider all aspects of the design to insure a solution that provides maximum system performance in the smallest physical size possible. The resulting design improves RF system performance by minimizing cable losses in front of the TMA. This allows network operators to achieve higher quality of service from their existing sites or larger cell radii for new deployments. The Amphenol Antenna Solutions design also reduces installation costs by eliminating two RF jumper cables per antenna and by eliminating the time required to mount the external TMA’s and to weatherproof the external RF connections. The logistics savings in combination with the improved RF system performance make the case for embedded amplifier technology very compelling.

B-1

Amphenol Telecom Solutions In-Building / Microcell Antennas Amphenol Antenna Solutions in-building and microcell antennas have been deployed by network operators worldwide to provide improved coverage in office buildings, campuses, tunnels and urban canyons. Our aesthetically pleasing, low profile designs are available in an assortment of directional and omnidirectional configurations giving network engineers the tools needed to optimize coverage in these difficult environments. Innovative Wideband, Dual-Band and Tri-Band configurations are available allowing one distributed antenna system to serve multiple service providers with minimum visual impact. To search on-line for In-Building / Microcell antennas: http://www.amphenol-jaybeam.com Tri-Sector Antenna Solutions Amphenol Antenna Solutions is the industry leader in low visual impact Tri-sector antenna solutions. Since our first Tri-Sector antenna deployment over a decade ago, we have continuously enhanced the product range to support the need for smaller antenna structures with increased functionality. Amphenol Antenna Solutions understands the unique packaging challenges associated with tri-sector sites and has designed UNICELL and TRIO to provide trouble free installation and easy serviceability. A full line of accessories including TMA mounting canisters, lightning protection kits and flag pole adapter kits are available to allow customization to meet site specific requirements. UNICELL Unicells are antenna enclosures designed to conceal a wide variety of “off-the-shelf” Amphenol Antenna Solutions dual polarized antennas. The Unicell product family was designed by a team of RF and mechanical engineers to provide robust mechanical structures with maximum RF performance. Three module diameters are available in an assortment of lengths which can be custom tailored to meet your site requirements. Depending on the antenna selected, features such as azimuth panning & mechanical downtilt can be accommodated. In addition to the modules themselves accessories such as TMA mounting canisters, lightning protection kits, GPS antenna mounting kits, mounting masts and flag pole adapter kits have been developed to enhance the product offering. Product Features:  3-Sector antenna enclosures  312mm (12-inch), 368mm (14-inch) and 511 mm (20-inch) diameter versions  Removable concealment panels  Easy field access to antennas  Stackable to meet co-location requirements  AZ and EL adjustment available in some modules To search on-line for UNICELL antennas: http://www.amphenol-jaybeam.com

B-2

Amphenol Telecom Solutions Product Overview – Continued Tri-Sector Antenna Solutions - Continued TRIO TRIO antennas are 3-sector base station antennas concealed inside a compact cylindrical shroud. Unlike Unicell structures, the TRIO radiating sub-assemblies are not individually removable. Rather, the antenna for each sector is built directly into the TRIO mechanical structure, creating the smallest possible antenna diameter. The product range includes Wideband, Twin-Wideband, Dual-Band and Tri-Band configurations in diameters ranging from 230mm (9-inch) to 457mm (18-inch.) TRIO antennas are RET capable and selected models are available with azimuth panning. Accessories such as TMA mounting canisters, lightning protection kits and mounting masts are available to enhance the product offering. Product Features:  3-Sector base station antennas  Wideband, Dual-Band and Tri-Band configurations  230mm (9-inch), 310mm (12-inch), 388mm (15-inch) and 457mm (18-inch) diameters  Removable connector access panels  Independent Remote Electrical Tilt on each sector  Independent AZ panning available in some modules To search on-line for TRIO antennas: http://www.amphenol-jaybeam.com UHF & VHF Base Station Antennas Amphenol Antenna Solutions is a leading supplier of professional base station antennas to Private Mobile Radio (PMR), TETRA and broadcast markets worldwide. Applications include public safety, transportation, utilities, government, military, digital radio as well as mobile video broadcast using the DVB-H standard. Amphenol Antenna Solutions is a long standing supplier to these markets and has an excellent reputation for delivering high quality antennas for mission critical applications. Amphenol Antenna Solutions offers a robust range of antenna models covering the VHF and UHF frequency bands in indoor, Yagi, sector grid, sector panel, discone, collinear, exposed dipole, center-fed dipole and end-fed dipole omni directional configurations. Our high performance antennas are field proven by network operators worldwide to deliver reliable communications in harsh tower top environments. Amphenol Antenna Solutions offers a full range of robust mounting options as well as an assortment of phasing harnesses to create high gain antennas for long range applications. Marine Antennas Amphenol Antenna Solutions has produced high performance Marine antennas for more than 30 years under the MAT Equipment brand covering the AM, FM, HF, CB, TV, VHF, UHF and Cellular frequency bands. Our professional antennas are produced to the highest quality standards in the industry, providing clear, reliable communications that you can trust. The marine environment is extremely harsh due to constant exposure to wind, sea and pounding waves. Our engineers understand this environment and have developed robust antenna designs using the finest materials and finishes available to insure years of reliable service on the sea. A wide selection of mounting options and accessories are available to suit your application. Select from our large assortment of high quality mounting brackets, ratcheting bases, RF connector styles and cable lengths to insure quick, easy installation. To search on-line for Marine antennas: http://www.amphenol-jaybeam.com

B-3

Flagpole Solutions for all flag sizes Lamp Post Integration

Chimney

Non Penetrating Roof Mount

CAMOUFLAGE SOLUTIONS

Vegetation Camouflage All Electrical Equipment installed internally in our tri-sector range

B-4

Amphenol Telecom Solutions Amphenol Jaybeam SmartTilt™ - Remote Electrical Tilt Technology Remote Electrical Tilt Technology Amphenol Antenna Solutions has developed a complete range of equipment to provide Remote Electrical Tilt (RET) operation, known as SmartTilt™. Network engineers can make electrical downtilt adjustments in minutes without the need to schedule site outage and without having to pay for an expensive tower climb. Amphenol Antenna Solutions is proud to be at the forefront of RET Technology and was responsible for gathering the industry together to form the Antenna Interface Standards Group (AISG.) This group has worked together to develop an open communications standard for remote control of basestation antennas and mast head amplifiers. All Amphenol Antenna Solutions SmartTilt™ antennas are compliant with the AISG standard. Amphenol Antenna Solutions’s Mechanical Electrical Tilt (MET) antennas can be upgraded to remote electrical tilt (RET) antennas with the addition of the appropriate RET unit. Two different RET configurations are available depending on the antenna type and on your specific site requirements: Internal RET: Internal, “cassette style” RET’s install inside the antenna structure and are not visible after installation. This style construction often results in a slightly longer antenna, but one with no external features to be damaged during installation or to impede RF connector weatherproofing. External RET:

External RET’s extend beyond the bottom of the antenna structure and are not typically considered part of the antenna length by zoning officials. With this style RET, 100% of the antenna aperture is dedicated to radiating elements providing higher gain for a given antenna size.

Portable Control Unit Multiple RET antennas can be daisy chained together and controlled at the base of the tower via a single data feed cable. (See Diagram.) For applications where running the additional control cable is not feasible, Amphenol Antenna Solutions offers an assortment of AISG Modems to inject the control signals onto an existing RF feed cable. Electrical downtilt of antennas can be controlled at the site using a standard laptop computer and a Amphenol Antenna Solutions Portable Control Unit (PCU) kit. For more information on SmartTilt™ solutions, please contact Jaybeam Wireless sales and customer service.

JAYBEAM

B-5

Amphenol Telecom Solutions Amphenol Jaybeam SmartTilt™– Continued Remote Electrical Tilt Technology – Continued SmartTilt™ Site Configuration

To search on-line for Remote Electrical Tilt Technology: http://www.jaybeamwireless.com/remote-electrical-tilt-technology.php JAYBEAM

B-6

Amphenol Telecom Solutions Cellular Antennas - Table of Contents ITEM CODE 5052100 5052300 5130100 5133100 5133110 5142100 5157100 5157120 5160100 5162100 5162703 5162903 5163100 5165100 5176100 5176703 5176903 5177100 5177703 5257100 5260311 5264102 5265102 5270200 5290100 5829101 5860100 5860110 5863100 5863903 5876100 5880100 5880110 7691300 7825100 BMX065X13x000 BMX090X13x000 GSM3X75-22-A W85-13-x010 W85-19-x28

……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ………………………………………………………………………………………..

PAGE NUMBER B-15 B-16 B-17 B-18 B-19 B-20 B-21 B-22 TO B-23 B-24 B-25 B-26 B-27 B-28 B-29 B-30 B-31 B-32 B-33 TO B-34 B-35 B-36 B-37 B-38 B-39 TO B-40 B-41 TO B-42 B-43 B-44 TO B-45 B-46 TO B-47 B-48 TO B-49 B-50 TO B-51 B-52 TO B-53 B-54 TO B-55 B-56 TO B-57 B-58 TO B-59 B-60 B-61 B-62 B-63 B-64 B-65 TO B-66 B-67 TO B-68

806-960 / 1710-2170 MHz 5052100

MULTI BAND CEILING MOUNTED MICROCELL ANTENNA This antenna offers excellent performance within a minimal design, for use on multiple bands.

V-Pol | Omni | 2.0 dBi

Electrical Characteristics Frequency bands

806-960 MHz / 1710-2170 MHz

Polarization

Vertical

Horizontal beamwidth (-3 dB)

Omnidirectional

Gain

2 dBi

Impedance

50Ω

VSWR

≤ 1.85:1 max full band

Input power

50 W per band

Termination

N socket on 30 cm RG303 cable (light brown jacket)

Mechanical Characteristics Dimensions

Base plate: Mini:

Ø 18 cm Ø 7 cm

Weight

Ø 7.1 in Ø 2.8 in

0.35 kg

0.8 lbs

Packaging Packing dimensions LxWxD

25 x 11 x 11 cm

Packing weight

9.8 x 4.3 x 4.3 in

0.7 kg

1.5 lbs

Mounting Options 4 x 5 mm (0.16 x 0.20 in) holes in base plate concealed with 3 removable caps

Mounting

Horizontal

Vertical | 950 MHz

Vertical | 1800 MHz

Vertical | 1920 MHz

Vertical | 2080 MHz

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0909

www.amphenol-jaybeam.com

B-15

806-960 / 1710-2500 MHz 5052300 INDOOR CEILING MOUNT ANTENNA

V-Pol | Omni | 2.0 dBi

Electrical Characteristics Frequency bands

806-960 MHz / 1710-2500 MHz

Polarization

Vertical

Horizontal beamwidth

Omnidirectional

Gain

2 dBi

VSWR

< 1.8:1

Input power

100 W

Input connector type / Location

N Female + 30 cm (11.8 in) RG303 cable / Rear

Radome color

White

Mechanical Characteristics

Dimensions (Ø x H)

203 x 71 mm

Weight

8.0 x 2.8 in

0.35 kg

0.8 lbs

Mounting Options

Mounting

Screws supplied (3 holes in the base) for ceiling mounting.

Horizontal

Vertical | 900 MHz

Vertical | 1800 MHz

Vertical | 1900 MHz

Vertical | 2100 MHz

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0909

www.amphenol-jaybeam.com

B-16

880-960 / 1710-2170 MHz 5130100 5130100 is a dual band, dual polarized sector panel overing the GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment on each band and can be fitted with an optional remote control.

X-Pol | Dual Band VET | 85° | 147./16.0 dBi

Electrical Characteristics Frequency bands

880-960 MHz

1710-2170 MHz

±45°

±45°

Polarization Horizontal beamwidth Vertical beamwidth Gain

85°

85°

9.5° (±0.5°)

6° (±0.5°)

14.7 dBi (±0.5)

16.0 dBi (±0.5)

0-10°

0-10°

Electrical downtilt Impedance

50Ω

VSWR

24 dB (± 30° at the back)

Null fill

Better than 22 dB

IM3 (2x20W carrier)

-110 dBm

Isolation between ports

< 30 dB

Isolation between bands

< 32 dB

Input power

200 W

Connector(s)

160 W

4 Ports / 7/16-DIN / Female / Long Neck / Bottom

Mechanical Characteristics Dimensions HxWxD

2040 x 286 x 138 mm

80.3 x 11.3 x 5.4 in

Weight without brackets

18.5 kg

Wind speed

160 km/hr

100 mph

665 N

149 lbf

Wind load @ 160 km/hr (100 mph) Shroud / Housing

41 lbs

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits Pipe Diameter

Weight

Mounting bracket kit

0900181/00

48-115 mm

2.6 kg

Kit to add mech. downtilt (0-10°)

---

---

1.9-4.5 in

5.6 lbs

---

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-17 7

880-960 / 1710-2170 MHz 5133100 X-Pol | Dual Band VET | 85° | 16.0/16.0 dBi

5133100 is a full size dual band, dual polarized sector panel covering the GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment on each band and can be fitted with an optional remote control.

Electrical Characteristics Frequency bands

880-960 MHz

1710-2170 MHz

Polarization

±45°

±45°

Horizontal beamwidth

85°

85°

Vertical beamwidth

7°

6°

16.0 dBi

16.0 dBi

Gain Electrical downtilt

0-10°

0-10°

Impedance

50Ω

VSWR

30 dB

Isolation between bands

> 40 dB

Input power

200 W

Connector(s)

160 W

4 Ports / 7/16-DIN / Female / Long Neck / Bottom

Mechanical Characteristics Dimensions HxWxD

2680 x 286 x 138 mm

Weight without brackets

105.5 x 11.3 x 5.4 in

25 kg

Wind speed Wind load @ 160 km/hr (100 mph) Shroud / Housing

55 lbs

160 km/hr

100 mph

900 N

202 lbf

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits Pipe Diameter

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

Kit to add mech. downtilt (0-9.5°)

0900394/00

---

Wall mount with azimuth pan

0900395/00

---

Wall mount with mech. tilt & az. pan

0900533/00

---

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator. This antenna can be delivered with the RET units already fitted under part number 5133000.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-18

880-960 / 1710-2170 MHz 5133110 X-Pol | Dual Band VET | 85° | 15.5/15.5 dBi

5133110 is a full size dual band, dual polarized sector panel covering the GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment on each band and can be fitted with an optional remote control.

Electrical Characteristics Frequency bands

880-960 MHz

1710-2170 MHz

Polarization

±45°

±45°

Horizontal beamwidth

85°

85°

Vertical beamwidth

7°

6°

15.5 dBi

15.5 dBi

Gain Electrical downtilt

0-10°

0-10°

Impedance

50Ω

VSWR

30 dB

Isolation between bands

> 40 dB

Input power

200 W

Connector(s)

160 W

4 Ports / 7/16-DIN / Female / Long Neck / Bottom

Mechanical Characteristics Dimensions HxWxD

2680 x 286 x 138 mm

Weight without brackets

105.5 x 11.3 x 5.4 in

25 kg

Wind speed Wind load @ 160 km/hr (100 mph) Shroud / Housing

55 lbs

160 km/hr

100 mph

900 N

202 lbf

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits Pipe Diameter

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

Kit to add mech. downtilt (0-9.5°)

0900394/00

---

Wall mount with azimuth pan

0900395/00

---

Wall mount with mech. tilt & az. pan

0900533/00

---

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator. This antenna can be delivered with the RET units already fitted under part number 5133010.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-19

1710-2170 MHz 5142100

5142100 is a 65° sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and can be fitted with an optional remote control.

X-Pol | VET Panel | 65° | 19.0 dBi

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

4.5°

Gain

19.0 dBi

Electrical downtilt

2-10°

Impedance

50 Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 18 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Mechanical Characteristics Dimensions HxWxD

1950 x 157 x 69 mm

76.8 x 6.2 x 2.7 in

Weight without brackets

9.5 kg

Wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

21 lbs 100 mph

395 N

Connector(s)

89 lbf

2 ports / 7/16 DIN / Female / “Long Neck” / Bottom

Shroud

Fiberglass extrusion, Grey RAL 7035

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight

Mounting bracket kit

0900390/00

48-115 mm

2.55 kg 5.6 lbs

Kit to add mechanical downtilt

---

---

1.9-4.5 in

Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators.

Horizontal Plane

Vertical Plane

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-20

1710-2170 MHz 5157100

5157100 is a twin 65° sector antenna covering the GSM1800/GSM1900/UMTS frequency bands. Each antenna has variable electrical tilt capability with manual adjustment and can be fitted with an optional remote control.

XX-Pol | VET Panel | 65° | 18.5 dBi

Electrical Characteristics (general) The antenna contains two radiating arrays housed in a single mechanical structure. Isolation between arrays

> 32 dB

Electrical Characteristics of each antenna Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

6°

Gain

16.4 dBd / 18.5 dBi

Electrical downtilt

0-10°

Impedance

50 Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 18 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Mechanical Characteristics Dimensions HxWxD

1730 x 340 x 78 mm

Weight without brackets Wind speed Wind load @ 160 km/hr (100 mph) Connector(s)

67.3 x 13.4 x 3.0 in

18 kg

40 lbs

160 km/hr

100 mph

785 N

176 lbf

4 ports / 7/16 DIN / Female / “Long Neck” / Bottom

Shroud / Housing

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight

Mounting bracket kit

0900390/00

48-115 mm

2.55 kg 5.6 lbs

Kit to add mechanical downtilt (0-14°)

0900374/00

---

1.9-4.5 in

Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators for each antenna.

Horizontal Plane

Vertical Plane

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-21

1710-2170 MHz 5157120

● Double wideband antenna, dual polarized, 4 connectors

5157020 5157020G

● Variable electrical tilt, 0-10° on each antenna

XX-Pol | VET Panel | 65° | 18.5 dBi

● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● RET modules fully inserted inside the antenna (field replaceable)

Model number options: 5157120 Manual Electrical Tilt Antenna 5157020 Remote Electrical Tilt Antenna (AISG1.1) 5157020G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has four connectors located at the bottom face and marked with colored rings. Wideband 1710-2170 MHz ports

WHITE rings

2 x 7/16 DIN Long Neck

Wideband 1710-2170 MHz ports Recommended for UMTS2100

BLUE rings

2 x 7/16 DIN Long Neck

Electrical Characteristics (general) The antenna contains two radiating arrays housed in a single mechanical structure. Isolation between arrays

> 32 dB

Electrical Characteristics of each antenna Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

6°

Gain

16.4 dBd / 18.5 dBi

Electrical downtilt

0-10°

Impedance

50 Ω

VSWR

< 1.4

Upper sidelobe rejection

> 18 dB

Front-to-Back ratio

> 25 dB

Null fill

< 18 dB typical

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

< -153 dBc

Maximum power per port

160 W

Electrical Downtilt Control Electrical downtilt can be controlled separately for each internal array. Manual control: The electrical tilt of each band is changed by tuning the adjustment screw at the end of each tilt indicator with a 10 mm socket wrench. Remote control: Optional RET modules (one per internal array), already configured and compatible with 3GPP/AISG2.0 or AISG1.1, allow the remote control of the variable electrical downtilt. The remote control of other equipment or sectors is possible by “daisy-chain” through the use of an extra AISG connector located on each RET module. The RET modules are fully inserted at the bottom of the antenna and do not add any additional length. The tilt angle indicators always stay visible and each band of the antenna still has manual tilt control (manual override). The antennas delivered with RET fitted in it (5157120 and 5157120G) include the AISG cable necessary for the daisy chain between the two RET units. RET module part number (two per antenna)

RETU-CA01 RETU-CG01

for AISG1.1 protocol (2 supplied with 5157120) for 3GPP/AISG2.0 protocol (2 supplied with 5157120G)

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-22

1710-2170 MHz 5157120 5157020 5157020G XX-Pol | VET Panel | 65° | 18.5 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

1710 x 340 x 77 mm

Weight without brackets

67.3 x 13.4 x 3.0 in

18 kg

Survival wind speed

40 lbs

200 km/hr

Operational wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

785 N

Shroud

124 mph 99 mph 176 lbf

Outdoor plastic, grey RAL7035

Packaging Packing dimensions

2300 x 340 x 210 mm

Packing weight

20.0 kg

Packing volume

0.164 m3

90.6 x 13.4 x 8.3 in 44 lbs 5.8 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900181/00

48-115 mm

1.9-4.5 in

3.4 kg

7.5 lbs

Mounting bracket kit

0900182/00

70-150 mm

2.8-5.9 in

3.9 kg

8.6 lbs

Kit to add mechanical downtilt

0900188/00

---

1.5 kg

3.3 lbs

Wall mount with azimuth pan

0900183/00

---

1.6 kg

3.5 lbs

Wall mount with mech. tilt & az. pan

0900885/00

---

3.3 kg

7.3 lbs

Installation Do not install the antenna with the connectors facing upwards.

Bottom View

Tilt angle indicators Location of the RET modules

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-23

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 MHz 5160100 X-Pol | Dual Band VET | 65° | 17.5/18.2 dBi

5160100 is a full size dual band, dual polarized sector panel covering the GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment on each band and can be fitted with an optional remote control.

Electrical Characteristics

880-960 MHz

Frequency bands

880-960 MHz

1710-2170 MHz 1710-1880 MHz

1850-1990 MHz

1920-2170 MHz

Polarization

±45°

Horizontal beamwidth

64°

66°

63°

60°

Vertical beamwidth

6.9°

5.8°

5.7°

5.6°

17.5 dBi

17.3 dBi

17.7 dBi

18.2 dBi

Gain Electrical downtilt

±45°

0-10°

0-10°

Impedance

50Ω

VSWR

25 dB

Null fill

18 dB typical

IM3 (2x20W carrier)

-110 dBm

Isolation between ports

Tilt 0-2° > 28 dB

Isolation between bands

Tilt 2-10° > 30 dB

35 dB typical

Input power

200 W

Connector(s)

160 W 4 Ports / 7/16-DIN / Female / Long Neck / Bottom

Mechanical Characteristics Dimensions HxWxD

2680 x 286 x 138 mm

Weight without brackets

105.5 x 11.3 x 5.4 in

25 kg

55 lbs

Wind speed

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

900 N

202 lbf

Shroud / Housing

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits Pipe Diameter

Weight

Mounting bracket kit

0900393/00

48-115 mm

5.8 kg

Kit to add mech. downtilt (0-10°)

---

---

1.9-4.5 in

13 lbs

---

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-24

1710-2170 MHz 5162100

5162100 is a 65° sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and can be fitted with an optional remote control.

X-Pol | VET Panel | 65° | 18.5 dBi

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

6°

Gain

18.5 dBi

Electrical downtilt

0-10°

Impedance

50 Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 18 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Mechanical Characteristics Dimensions HxWxD

1690 x 157 x 69 mm

66.5 x 6.2 x 2.7 in

Weight without brackets

8.4 kg

Wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

19 lbs 100 mph

340 N

Connector(s)

76 lbf

2 ports / 7/16 DIN / Female / “Long Neck” / Bottom

Shroud

Fiberglass extrusion, Grey RAL 7035

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight

Mounting bracket kit

0900390/00

48-115 mm

2.55 kg 5.6 lbs

Kit to add mechanical downtilt (0-14°)

---

---

1.9-4.5 in

Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators.

Horizontal Plane

Vertical Plane

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-25

1710-2170 MHz 5162703

● TRIO230 (120° fixed azimuth) ● Three 65° wideband antennas installed at 120° in a cylindrical shroud

X-Pol | VET TRIO | 65° | 18.5 dBi

● MET and RET versions available ● Manual units can be upgraded with RET control ● A built-in canister at the bottom allows access to connectors and tilt control ● A remote controlled antenna still has manual control capability with a visible tilt indicator Model number options: 5162703 Manual Electrical Tilt - Unit fitted with 3 sectors 5162701 Manual Electrical Tilt - Unit fitted with 1 sector 5162702 Manual Electrical Tilt - Unit fitted with 2 sectors 5162603 Remote Electrical Tilt

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

6°

Gain

18.5 dBi

Electrical downtilt

0-10°

Sector antenna bearings

0°, 120°, 240°

Impedance

50Ω

VSWR

< 1.5:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 18 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Connector(s)

6 ports / 7/16 DIN / Female / Long Neck / Bottom

Mechanical Characteristics Overall Dimensions Height x Diameter

1940 x 230 mm

Antenna Height Access Panel Height x Diameter Weight

76.4 x 9.1 in

1565 mm

61.6 in

250 x 230 mm

9.8 x 9.1 in

27 kg

Wind speed - Survival

60 lbs

200 km/hr

124 mph

Wind speed - Operational

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

390 N

Shroud / Housing

88 lbf

Outdoor plastic, Grey RAL7035 / Aluminum

Installation Any base allowing a 230 mm (9.1 in) diameter flat surface. The antenna must be bolted with six M10 screws 120° apart in a 180 mm (7.1 in) diameter construction circle. Accessosries Lightning Finial

TRX-LPK

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-26

1710-2170 MHz 5162903

● TRIO310 (±15° individual azimuth panning) ● Three 65° wideband antennas installed at 120° in a cylindrical shroud

X-Pol | VET TRIO | 65° | 18.5 dBi With Individual Azimuth Panning (±15°)

● MET and RET versions available ● Manual units can be upgraded with RET control ● A built-in canister at the bottom allows access to connectors and tilt control ● A remote controlled antenna still has manual control capability with a visible tilt indicator Model number options: 5162903 Manual Electrical Tilt - Unit fitted with 3 sectors 5162901 Manual Electrical Tilt - Unit fitted with 1 sector 5162902 Manual Electrical Tilt - Unit fitted with 2 sectors 5162803 Remote Electrical Tilt

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

6°

Gain

18.5 dBi

Electrical downtilt

0-10°

Sector antenna bearings

0° (±15°), 120° (±15°), 240° (±15°)

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 18 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Connector(s)

6 ports / 7/16 DIN / Female / Long Neck / Bottom

Mechanical Characteristics Overall Dimensions Height x Diameter

1937 x 310 mm

Antenna Height Access Panel Height x Diameter Weight

76.3 x 12.2 in

1565 mm

61.6 in

250 x 310 mm

9.8 x 12.2 in

37 kg

Wind speed - Survival

82 lbs

200 km/hr

124 mph

Wind speed - Operational

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

252 N

Shroud / Housing

57 lbf

Outdoor plastic, Grey RAL7035 / Aluminum

Installation Any base allowing a 310 mm (12.2 in) diameter flat surface. The antenna must be bolted with six M10 screws 60° apart in a 260 mm (10.2 in) diameter construction circle. Accessosries Lightning Finial

TRX-LPK

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-27

870-960 / 1710-2170 MHz 5163100 5163100 is a 3/4 dual band, dual polarized sector panel covering the GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment on each band and can be fitted with an optional remote control.

X-Pol | Dual Band VET | 65° | 16.5/17.5 dBi

Electrical Characteristics Frequency bands

870-960 MHz

1710-2170 MHz

±45°

±45°

Polarization Horizontal beamwidth Vertical beamwidth Gain

65°

65°

9.5° (±0.5°)

6° (±0.5°)

16.5 dBi (±0.5)

17.5 dBi (±0.5)

0-10°

0-10°

Electrical downtilt Impedance

50Ω

VSWR

25 dB

Null fill

Better than 22 dB

IM3 (2x20W carrier)

-110 dBm

Isolation between ports

< 30 dB

Isolation between bands

< 32 dB

Input power

200 W

Connector(s)

160 W

4 Ports / 7/16-DIN / Female / Long Neck / Bottom

Mechanical Characteristics Dimensions HxWxD

2040 x 286 x 138 mm

80.3 x 11.3 x 5.4 in

Weight without brackets

18.5 kg

Wind speed

160 km/hr

100 mph

665 N

149 lbf

Wind load @ 160 km/hr (100 mph) Shroud / Housing

41 lbs

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits Pipe Diameter

Weight

Mounting bracket kit

0900181/00

48-115 mm

2.6 kg

Kit to add mech. downtilt (0-10°)

---

---

1.9-4.5 in

5.6 lbs

---

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-28

870-960 / 1710-2170 MHz 5165100 5165110 is a half size dual band, dual polarized sector panel covering the GSM900/1800/1900 and UMTS frequency bands. The antenna features variable electrical tilt with manual adjustment on each band and can be fitted with an optional remote control.

X-Pol | Dual Band VET | 65° | 15.0/16.5 dBi

Electrical Characteristics Frequency bands

870-960 MHz

1710-2170 MHz

±45°

±45°

Polarization Horizontal beamwidth Vertical beamwidth Gain

65°

65°

13.5° (±0.5°)

7° (±0.5°)

15.0 dBi (±0.4)

16.5 dBi (±0.4)

0-10°

0-10°

Electrical downtilt Impedance

50Ω

VSWR

25 dB

Null fill

Better than 22 dB

IM3 (2x20W carrier)

-110 dBm

Input power

200 W

Connector(s)

160 W

4 Ports / 7/16-DIN / Female / Long Neck / Bottom

Mechanical Characteristics Dimensions HxWxD

1500 x 286 x 138 mm

Weight without brackets

14.5 kg

Wind load @ 161 km/hr (100 mph)

500 N

Shroud / Housing

59.1 x 11.3 x 5.4 in 32 lbs 112 lbf

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits Pipe Diameter

Weight

Mounting bracket kit

0900181/00

48-115 mm

2.6 kg

Kit to add mech. downtilt (0-10°)

---

---

1.9-4.5 in

5.6 lbs

---

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-29

1710-2170 MHz 5176100

5176100 is a 65° sector wide band GSM1800/GSM1900/UMTS antenna fully housed in a fiberglass shroud. The antenna features variable electrical tilt with manual adjustment and can be fitted with an optional remote control.

X-Pol | VET Panel | 65° | 17.5 dBi

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

7°

Gain

17.5 dBi

Electrical downtilt

2-14°

Impedance

50 Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 22 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Mechanical Characteristics Dimensions HxWxD

1430 x 157 x 69 mm

Weight without brackets Wind speed Wind load @ 160 km/hr (100 mph) Connector(s)

56.3 x 6.2 x 2.7 in

8 kg

18 lbs

160 km/hr

100 mph

290 N

65 lbf

2 ports / 7/16 DIN / Female / “Long Neck” / Bottom

Shroud

Fiberglass extrusion, Grey RAL 7035

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight

Mounting bracket kit

0900390/00

48-115 mm

1.9-4.5 in

2.55 kg 5.6 lbs

Mounting bracket kit

0900503/00

70-150 mm

2.8-5.9 in

---

Wall mounting kit with azimuth pan

0900408/00

---

---

Kit to add mechanical downtilt

0900474/00

---

---

Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators. This antenna can be delivered with the RET unit already fited under part number 5176000.

Horizontal Plane

Vertical Plane

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-30

1710-2170 MHz 5176703

● TRIO230 (120° fixed azimuth) ● Three 65° wideband antennas installed at 120° in a cylindrical shroud

X-Pol | VET TRIO | 65° | 17.5 dBi

● MET and RET versions available ● Manual units can be upgraded with RET control ● A built-in canister at the bottom allows access to connectors and tilt control ● A remote controlled antenna still has manual control capability with a visible tilt indicator Model number options: 5176703 Manual Electrical Tilt - Unit fitted with 3 sectors 5176701 Manual Electrical Tilt - Unit fitted with 1 sector 5176702 Manual Electrical Tilt - Unit fitted with 2 sectors 5176603 Remote Electrical Tilt

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

7°

Gain

17.5 dBi

Electrical downtilt

2-14°

Sector antenna bearings

0°, 120°, 240°

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 22 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Connector(s)

6 ports / 7/16 DIN / Female / Long Neck / Bottom

Mechanical Characteristics Overall Dimensions Height x Diameter

1710 x 230 mm

Antenna Height Access Panel Height x Diameter Weight

67.3 x 9.1 in

1335 mm

52.6 in

250 x 230 mm

9.8 x 9.1 in

25 kg

Wind speed - Survival

55 lbs

200 km/hr

124 mph

Wind speed - Operational

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

184 N

Shroud / Housing

41 lbf

Outdoor plastic, Grey RAL7035 / Aluminum

Installation Any base allowing a 230 mm (9.1 in) diameter flat surface. The antenna must be bolted with six M10 screws 120° apart in a 180 mm (7.1 in) diameter construction circle. Accessosries Lightning Finial

TRX-LPK

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-31

1710-2170 MHz 5176903

● TRIO310 (±15° individual azimuth panning) ● Three 65° wideband antennas installed at 120° in a cylindrical shroud

X-Pol | VET TRIO | 65° | 17.5 dBi With Individual Azimuth Panning (±15°)

● MET and RET versions available ● Manual units can be upgraded with RET control ● A built-in canister at the bottom allows access to connectors, tilt control and azimuth control ● A remote controlled antenna still has manual control capability with a visible tilt indicator Model number options: 5176903 Manual Electrical Tilt - Unit fitted with 3 sectors 5176901 Manual Electrical Tilt - Unit fitted with 1 sector 5176902 Manual Electrical Tilt - Unit fitted with 2 sectors 5176803 Remote Electrical Tilt

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

7°

Gain

17.5 dBi

Electrical downtilt

2-14°

Sector antenna bearings

0° (±15°) , 120° (±15°), 240° (±15°)

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 22 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Connector(s)

6 ports / 7/16 DIN / Female / Long Neck / Bottom

Mechanical Characteristics Overall Dimensions Height x Diameter

1710 x 310 mm

Antenna Height Access Panel Height x Diameter Weight

67.3 x 12.2 in

1335 mm

52.6 in

250 x 310 mm

9.8 x 12.2 in

32 kg

Wind speed - Survival

71 lbs

200 km/hr

124 mph

Wind speed - Operational

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

268 N

Shroud / Housing

60 lbf

Outdoor plastic, Grey RAL7035 / Aluminum

Installation Any base allowing a 310 mm (12.2 in) diameter flat surface. The antenna must be bolted with six M10 screws 60° apart in a 260 mm (10.2 in) diameter construction circle. Accessosries Lightning Finial

TRX-LPK

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-32

1710-2170 MHz 5177100

● Double wideband antenna, dual polarized, 4 connectors

5177000 5177000G

● Variable electrical tilt, 2-14° on each antenna

XX-Pol | VET Panel | 65° | 17.5 dBi

● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● RET modules fully inserted inside the antenna (field replaceable)

Model number options: 5177100 Manual Electrical Tilt Antenna 5177000 Remote Electrical Tilt Antenna (AISG1.1) 5177000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has four connectors located at the bottom face and marked with colored rings. Wideband 1710-2170 MHz ports

WHITE rings

2 x 7/16 DIN Long Neck

Wideband 1710-2170 MHz ports Recommended for UMTS2100

BLUE rings

2 x 7/16 DIN Long Neck

Electrical Characteristics (general) The antenna contains two radiating arrays housed in a single mechanical structure. Isolation between arrays

> 32 dB

Electrical Characteristics of each antenna Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

7°

Gain

15.4 dBd / 17.5 dBi

Electrical downtilt

2-14°

Impedance

50 Ω

VSWR

< 1.4

Upper sidelobe rejection

> 18 dB

Front-to-Back ratio

> 25 dB

Null fill

< 18 dB typical

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

< -153 dBc

Maximum power per port

160 W

Electrical Downtilt Control Electrical downtilt can be controlled separately for each internal array. Manual control: The electrical tilt of each band is changed by tuning the adjustment screw at the end of each tilt indicator with a 10 mm socket wrench. Remote control: Optional RET modules (one per internal array), already configured and compatible with 3GPP/AISG2.0 or AISG1.1, allow the remote control of the variable electrical downtilt. The remote control of other equipment or sectors is possible by “daisy-chain” through the use of an extra AISG connector located on each RET module. The RET modules are fully inserted at the bottom of the antenna and do not add any additional length. The tilt angle indicators always stay visible and each band of the antenna still has manual tilt control (manual override). The antennas delivered with RET fitted in it (5177000 and 5177000G) include the AISG cable necessary for the daisy chain between the two RET units. RET module part number (two per antenna)

RETU-CA01 RETU-CG01

for AISG1.1 protocol (2 supplied with 5177000) for 3GPP/AISG2.0 protocol (2 supplied with 5177000G)

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-33

1710-2170 MHz 5177100 5177000 5177000G XX-Pol | VET Panel | 65° | 17.5 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

1430 x 340 x 77 mm

56.3 x 13.4 x 3.0 in

Weight without brackets

13.1 kg

Survival wind speed

200 km/hr

29 lbs

Operational wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

660 N

Shroud

124 mph 99 mph 148 lbf

Outdoor plastic, grey RAL7035

Packaging Packing dimensions

2000 x 380 x 140 mm

Packing weight

20.0 kg

Packing volume

0.106 m3

78.7 x 15.0 x 5.5 in 44 lbs 3.7 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900181/00

48-115 mm

1.9-4.5 in

3.4 kg

7.5 lbs

Mounting bracket kit

0900182/00

70-150 mm

2.8-5.9 in

3.9 kg

8.6 lbs

Kit to add mechanical downtilt

0900188/00

---

1.5 kg

3.3 lbs

Wall mount with azimuth pan

0900183/00

---

1.6 kg

3.5 lbs

Wall mount with mech. tilt & az. pan

0900885/00

---

3.3 kg

7.3 lbs

Installation Do not install the antenna with the connectors facing upwards.

Bottom View

Tilt angle indicators Location of the RET modules

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-34

www.amphenol-jaybeam.com

REV0809

1710-2170 MHz 5177703

● TRIO380 (120° fixed azimuth) ● Three 65° TWIN wideband antennas installed at 120° in a cylindrical shroud

XX-Pol | VET TRIO | 65° | 17.5/17.5 dBi

● MET and RET versions available ● Manual units can be upgraded with RET control ● A built-in canister at the bottom allows access to connectors and tilt control ● A remote controlled antenna still has manual control capability with a visible tilt indicator Model number options: 5177703 Manual Electrical Tilt - Unit fitted with 3 sectors 5177701 Manual Electrical Tilt - Unit fitted with 1 sector 5177702 Manual Electrical Tilt - Unit fitted with 2 sectors 5177603 Remote Electrical Tilt

Electrical Characteristics Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

7°

Gain

17.5 dBi (each antenna per sector)

Electrical downtilt

2-14°

Sector antenna bearings

0°, 120°, 240°

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 22 dB

Isolation between ports

> 30 dB

Isolation between antennas in a sector

> 32 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Connector(s)

12 ports / 7/16 DIN / Female / Long Neck / Bottom

Mechanical Characteristics Overall Dimensions Height x Diameter

1710 x 388 mm

Antenna Height Access Panel Height x Diameter Weight

67.3 x 15.3 in

1335 mm

52.6 in

250 x 388 mm

9.8 x 15.3 in

53 kg

117 lbs

Wind speed - Survival

200 km/hr

124 mph

Wind speed - Operational

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

402 N

Shroud / Housing

90 lbf

Outdoor plastic, Grey RAL7035 / Aluminum

Installation Any base allowing a 388 mm (15.3 in) diameter flat surface. The antenna must be bolted with six M10 screws 60° apart in a 260 mm (10.2 in) diameter construction circle. Accessosries Lightning Finial

TRX-LPK

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-35

1710-2170 MHz 5257100

5257100 is a twin 65° sector antenna covering the GSM1800/GSM1900/UMTS frequency bands. Each antenna has variable electrical tilt capability with manual adjustment and can be fitted with an optional remote control.

XX-Pol | VET Panel | 65° | 19.0 dBi

Electrical Characteristics (general) The antenna contains two radiating arrays housed in a single mechanical structure. Isolation between arrays

> 32 dB

Electrical Characteristics of each antenna Frequency band

1710-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

4.5°

Gain

16.9 dBd / 19.0 dBi

Electrical downtilt

2-10°

Impedance

50 Ω

VSWR

< 1.4:1

Upper sidelobe rejection

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 18 dB

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

-153 dBc

Maximum power per port

160 W

Mechanical Characteristics Dimensions HxWxD

1990 x 340 x 78 mm

Weight without brackets

78.3 x 13.4 x 3.1 in

18 kg

Wind speed Wind load @ 160 km/hr (100 mph) Connector(s)

40 lbs

160 km/hr

100 mph

900 N

202 lbf

4 ports / 7/16 DIN / Female / “Long Neck” / Bottom

Shroud / Housing

Outdoor plastic / Aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight

Mounting bracket kit

0900390/00

48-115 mm

2.55 kg 5.6 lbs

Kit to add mechanical downtilt (0-14°)

---

---

1.9-4.5 in

Notes: Mounting plates add 45 mm (1.8 in) to top and bottom. Mechanical control of the electrical tilt does not add additional length at the bottom of antenna. The optional remote control of the electrical tilt fits completely inside the antenna. The remote controlled antenna still has the manual control capability and the tilt angle indicators for each antenna.

Horizontal Plane

Vertical Plane

on

le lab

So

i

n ter

a Av

t

Pa

on

le

b ila

So

va nA

er att

P

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-36

880-960 / 1710-2170 MHz 5260311 X-Pol | Dual Band VET Antenna | 65° | 17.0 dBi Electrical Characteristics Frequency band

880-960 MHz

Polarization

1710-1880 MHz

±45°

1900-2170 MHz ±45°

Horizontal beamwidth

70°

68°

65°

Vertical beamwidth

9.5°

6.5°

5.5°

15.0 dBi

16.0 dBi

Gain Electrical downtilt

17.0 dBi

0-10°

0-10°

Impedance

50Ω

50Ω

Return loss

> 15.6 dB

> 15.0 dB

Upper sidelobe

16 dB typical

16 dB typical

Front-to-Back ratio

> 20 dB

> 29 dB

Isolation

> 25 dB

> 25 dB

Maximum power per port

200 W

Connector(s)

160 W 4 ports / 7/16-DIN / Female / Bottom

Mechanical Characteristics Dimensions HxWxD

2400 x 236 x 130 mm

94.5 x 9.3 x 5.1 in

Overall dimensions to base of TMA mounting HxWxD

2920 x 236 x 130 mm

115.0 x 9.3 x 5.1 in

2920 mm shown in photo

Weight - 2400 mm

19.5 kg

Weight - 2920 mm

21.5 kg

Wind speed

200 km/hr

124 mph

Wind load - 2400 mm

800 N

180 lbf

Wind load - 2920 mm

900 N

Colour

43 lbs 47 lbs

202 lbf Grey RAL 7035

Mounting

Part number:

Weight:

Mounting bracket

0900590/00

6 kg

13 lbs

880-960 MHz

Horizontal

1710-2170 MHz

5° | Vertical

Horizontal

5° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-37

880-960 MHz 5264102

This 3/4 panel is designed for use on the GSM900 band and is offered with variable electrical tilt. The new curved shape of the shroud offers both improved appearance and reduce windload.

X-Pol | VET Panel | 65° | 16.5 dBi

Electrical Characteristics Frequency band

880-960 MHz

Polarization

±45°

Horizontal beamwidth

62° (±5°)

Vertical beamwidth

9°

Gain

16.5 dBi

Electrical downtilt

0-10°

Impedance

50 Ω

VSWR

< 1.4:1

Upper sidelobe levels

Typically better than 18 dB

Front-to-Back ratio

> 25 dB

Isolation between ports

> 30 dB

Maximum power per port

200 W

Mechanical Characteristics Dimensions HxWxD

2050 x 287 x 138 mm

Weight without brackets

80.7 x 11.3 x 5.4 in

13 kg

Wind speed

29 lbs

160 km/hr

Wind load @ 160 km/hr (100 mph) Front:610, Side:355, Rear:860 N Connector(s)

100 mph Front:137, Side:80, Rear:193 lbf

2 ports / 7/16 DIN / Female / Bottom

Shroud / Housing

Outdoor plastic / aluminum

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight

Mounting bracket kit

0900181/00

48-115 mm

5.0 kg

Kit to add mechanical downtilt (0-10°)

---

---

1.9-4.5 in

11 lbs

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the above dimensions. The remote controlled antenna still has the manual control capability and the tilt angle indicators.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-38

880-960 MHz 5265102

● Single band antenna, dual polarization, 2 connectors

5265002 5265002G

● Wide range of electrical tilt, variable 0°-10°

X-Pol | VET Panel | 65° | 17.5 dBi

● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● RET modules fully inserted inside the antenna (field replaceable)

Model number options: 5265102 Manual Electrical Tilt Antenna 5265002 Remote Electrical Tilt Antenna (AISG1.1) 5265002G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Electrical Characteristics Frequency band

880-960 MHz

Polarization

±45°

Horizontal beamwidth

65° (±5°)

Vertical beamwidth

7°

Gain

15.4 dBd / 17.5 dBi

Electrical downtilt

0-10° (continuously adjustable)

Impedance

50 Ω

VSWR

< 1.4

Upper sidelobe rejection

> 18 dB

Front-to-Back ratio

> 30 dB

Null fill

< 22 dB typical

Isolation between ports

> 30 dB

IM3 (2x20W carrier)

< -110 dBm

Maximum power per port Connector(s)

200 W 2 Ports / 7/16-DIN Long Neck / Female / Bottom

Electrical Downtilt Control Manual control: The electrical tilt is changed by turning the adjustment screw at the end of the tilt indicator with a 10 mm socket wrench. Remote control: An optional RET module, already configured and compatible with 3GPP/AISG2.0 or AISG1.1, allows the remote control of the variable electrical downtilt. This module is fully inserted at the bottom of the antenna and does not add any additional length. The remote control of other equipment or sectors is possible by “daisy-chain” through the use of an extra AISG connector located on the RET module. The tilt angle indicator always stays visible and the antenna still has manual tilt control (manual override).

RET module part number

RETU-CA11 RETU-CG11

for AISG1.1 protocol (supplied with 5265002) for 3GPP/AISG2.0 protocol (supplied with 5265002G)

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-39

880-960 MHz 5265102 5265002 5265002G X-Pol | VET Panel | 65° | 17.5 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

2690 x 287 x 138 mm

Weight without brackets

105.9 x 11.3 x 5.4 in

17 kg

37.5 lbs

Survival wind speed

200 km/hr

Operational wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 819 N Side: 480 N Back: 1160N

Shroud

124 mph 99 mph Front: 184 lbf Side: 108 lbf Back: 261 lbf

Outdoor plastic, grey RAL7035

Packaging Packing dimensions

2930 x 330 x 210 mm

Packing weight

115.3 x 13 x 8.3 in

26 kg

57.3 lbs

0.203 m3

Packing volume

7.2 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

5.1 kg 11.2 lbs

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

5.8 kg 12.8 lbs

Kit to add mechanical downtilt (0-10°)

0900394/00

---

3.1 kg

6.8 lbs

Wall mount with azimuth pan

0900395/00

---

2.3 kg

5.1 lbs

Wall mount with mech. tilt & az. pan

0900533/00

---

4.4 kg

9.7 lbs

Installation Always use the three mounting points to install the antenna. Do not install the antenna with the connectors facing upwards. Bottom View

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-40

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 MHz 5270200

● Tri-sector, “monopole” dual band antenna, 12 connectors

5270303 5270306

● Independent tilt on each band 0-10° / 0-10°

X-Pol | Dual Band VET TRIO | 65° | 15.0/17.0 dBi

● MET and RET versions ● Flag pole kit available

Model number options: 5270200 Manual Electrical Tilt Antenna 5270303 Manual Electrical Tilt for GSM Band, Remote Electrical Tilt for Wideband 5270306 Remote Electrical Tilt Antenna for both bands

Electrical Characteristics Frequency band

880-960 MHz

1710-1880 MHz

1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

70°

68°

65°

Vertical beamwidth

9.5°

6.5°

5.5°

12.9 dBd / 15.0 dBi

13.9 dBd / 16.0 dBi

Gain

±45°

14.9 dBd / 17.0 dBi

Electrical downtilt

0-10°

0-10°

Impedance

50Ω

50Ω

Return loss

> 15.6 dB

> 15.0 dB

Upper sidelobes

< -16 dB typical

Front-to-Back ratio

> 20 dB

> 29 dB

In-band isolation

> 25 dB

Inter-band isolation

> 30 dB

IM3 (2x20W carrier)

< -153 dBc

Maximum power per port

200 W

Connector(s)

160 W 12 ports / 7/16-DIN / Female / Bottom

RET Type / Part Number

5270303: RET-CD71; 5270306: RETU-DCA71

Mechanical Characteristics Overall Dimensions Height x Diameter

2830 x 325 mm

Weight

70 kg

111.4 x 12.8 in 154 lbs

Survival wind speed

200 km/hr

125 mph

Wind load @ 160 km/hr (100 mph)

496 N

111 lbf

Color

RAL 7035 Grey

Mounting Accessories Item:

Description:

Part Number:

Adapter plate

Adapter plate to provide six M10 x 1.5 tapped holes on 240 mm (9.4 in) bolt circle

3902908/68

TRIO Flange Interface

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-41

880-960 / 1710-2170 MHz 5270200 5270303 5270306 X-Pol | Dual Band VET TRIO | 65° | 15.0/17.0 dBi

880-960 MHz -90

-90 -60

-120

-150

35

30

25

20

15

10

150

5

30

120

35

25

20

15

10

150

60

5

120

35

60

20

15

10

5

120

35

30

25

20

15

10

150

60

-150

-30

0 180

30

5

120

-30

35

0 180

30

90

0° | Vertical

-90

25

150

90

Horizontal

30

30

25

20

15

10

150

60

5

0

30

120

90

2° | Vertical

-60

-120

-150

-30

0 180

30

90

60 90

4° | Vertical

6° | Vertical

-90 -60

-120

-150

-30

35

30

25

20

15

10

150

5

-30

35

0 180

30

120

-60

-120

-150

180

30

-90 -60

-120

-150

-30

0 180

-90 -60

-120

-150

-30

180

-90 -60

-120

30

25

20

15

10

150

60

5

0

30

120

60

90

90

8° | Vertical

10° | Vertical

1710-2170 MHz -90

-90 -60

-120

-150

35

30

25

20

15

10

150

5

30

120

35

25

20

15

10

150

60

5

120

60

25

20

15

10

5

30

120

35

30

25

20

150

60

2° | Vertical

-150

-30

0 180

90

0° | Vertical

-90

30

150

90

Horizontal

35

15

10

5

30

120

60 90

4° | Vertical

-60

-120

-150

-30

0 180

30

90

-30

35

0 180

30

25

20

150

15

10

5

0

30

120

60 90

6° | Vertical

-90 -60

-120

-150

-30

35

30

25

20

150

15

10

5

30

120

60 90

8° | Vertical

-60

-120

-150

180

30

-90 -60

-120

-150

-30

0 180

-90 -60

-120

-150

-30

180

-90 -60

-120

-30

35

0 180

30

25

20

150

15

10

5

0

30

120

60 90

10° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-42

www.amphenol-jaybeam.com

REV0809

880-960 MHz 5290100 X-Pol | VET Panel | 85° | 16.0 dBi

Electrical Characteristics Frequency bands

880-960 MHz

Polarization

±45°

Horizontal beamwidth

85° (±5°)

Vertical beamwidth

7°

Gain

16.0 dBi

Electrical downtilt (X)

0-10°

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe levels

Better than 18 dB

Front-to-Back ratio

> 25 dB

Null fill

Better than 22 dB

Isolation between ports

> 30 dB

Input power

200 W (each port)

Connector(s)

2 Ports / 7/16-DIN / Female / Bottom

Mechanical Characteristics Dimensions HxWxD

2690 x 287 x 138 mm

Weight without brackets

105.9 x 11.3 x 5.4 in

17 kg

Wind load @ 161 km/hr (100 mph)

37 lbs

820 N

Shroud / Housing

184 lbf

Outdoor plastic / Aluminum

Mounting Options

Part Number

Fits Pipe Diameter

Mounting bracket kit

0900393/00

48-115 mm

Kit to add mech. downtilt (0-10°)

---

1.9-4.5 in

Notes: The mechanical control of the electrical tilt does not add any additional length at the bottom of the antenna. When the optional remote control of the electrical tilt is installed, it fits completely inside the antenna base and does not add any additional length to the dimensions shown above. The remote controlled antenna still has the manual control capability and the tilt angle indicator.

Horizontal Plane

Vertical Plane

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-43

880-960 / 1710-2170 MHz 5829101

● Dual band antenna, 4 connectors

5829001 5829001G

● Independent tilt on each band 0-14° / 0-12°

XX-Pol | VET Panel | 65° | 15.0 /17.2 dBi

● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5829101 Manual Electrical Tilt Antenna 5829001 Remote Electrical Tilt Antenna (AISG1.1) 5829001G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has four connectors located at the bottom face, marked with colored rings. Low Band (RED rings)

880-960 MHz ports

High Band (BLUE rings)

1710-2170 MHz ports

Electrical Characteristics

2 x 7/16 DIN Long Neck

Low Band (RED)

High Band (BLUE)

880-960 MHz

1710-1880 MHz

1920-2170 MHz

Polarization

±45°

±45°

±45°

Horizontal beamwidth

65°

65°

63°

Vertical beamwidth

13°

7.5°

7°

14.5 ± 0.5 dBi

16.3 ± 0.5 dBi

16.7 ± 0.5 dBi

0-14°

0-12°

0-12°

Gain mid tilt Electrical downtilt Impedance

50Ω

50Ω

50Ω

VSWR

< 1.5

< 1.5

< 1.5

15 dB typical

15 dB typical

15 dB typical

> 22 dB

> 25 dB

> 25 dB

Upper sidelobe rejection Front-to-Back ratio Isolation between ports

> 25 dB

> 25 dB

> 25 dB

Isolation between bands

> 35 dB

> 35 dB

> 35 dB

< -110 dBm

< -110 dBm

< -110 dBm

200 W

160 W

160 W

IM3 (2x20W carrier) Maximum power per port

PRELIMINARY

Frequency band

2 x 7/16 DIN Long Neck

Electrical Downtilt Control Electrical downtilt can be controlled separately for low band (RED) and high band (BLUE). The tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override). RET module part number

MDCU-A0002 MDCU-G0002

Compliant to AISG1.1 (one unit included with 5829001) Compliant to 3GPP/AISG2.0 (one unit included with 5829001G)

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0909

www.amphenol-jaybeam.com

B-44

880-960 / 1710-2170 MHz 5829101 5829001 5829001G XX-Pol | VET Panel | 65° | 15.0 / 17.5 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

1500 x 253 x 147 mm

Weight without brackets

59.1 x 10.0 x 5.8 in

17 kg

37.5 lbs

Survival wind speed

200 km/hr

Operational wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 330 N

100 mph Front: 74.2 lbf

PRELIMINARY

Shroud / Housing

124 mph

Outdoor plastic, Grey RAL7035

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

5.1 kg

1.9-4.5 in

11 lbs

Installation Always attach antenna by the three mounting points. Do not install with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-45

www.amphenol-jaybeam.com

REV0909

880-960 / 1710-2170 MHz 5860100

● Dual band antenna, 4 connectors

5860000 5860000G

● Independent tilt on each band 0-10° / 4-14°

X-Pol | Dual Band VET | 65° | 17.5/18.0 dBi

● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5860100 Manual Electrical Tilt Antenna 5860000 Remote Electrical Tilt Antenna (AISG1.1) 5860000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has four connectors located at the bottom face, marked with colored rings. Low Band (RED rings)

880-960 MHz ports

2 x 7/16 DIN Long Neck

High Band (BLUE rings)

1710-2170 MHz ports

2 x 7/16 DIN Long Neck

Electrical Characteristics Frequency band

Low Band (RED) 880-960 MHz

High Band (BLUE) 1710-1880 MHz

1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

65°

64°

Vertical beamwidth

7°

6°

6°

17.0-17.5 dBi 17.0-17.5 dBi 16.9-17.4 dBi

17.3-17.6 dBi 17.2-17.4 dBi 17.2-17.3 dBi

17.6-18.1 dBi 17.4-17.9 dBi 17.3-17.7 dBi

Gain 0° downtilt 5° downtilt 10° downtilt

±45°

Electrical downtilt

0-10°

0-10°

Impedance

50Ω

50Ω

VSWR Upper sidelobe rejection Front-to-Back ratio

< 1.4

< 1.4

18 dB typical

18 dB typical

> 30 dB

> 30 dB

Isolation between ports

> 30 dB

> 30 dB

Isolation between bands

45 dB typical

45 dB typical

< -110 dBm

< -110 dBm

200 W

160 W

IM3 (2x20W carrier) Maximum power per port Electrical Downtilt Control

Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override).

RET module part number

MDCU-A0001 MDCU-G0001

Compliant to AISG1.1 Compliant to 3GPP/AISG2.0

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-46

880-960 / 1710-2170 MHz 5860100 5860000 5860000G X-Pol | Dual Band VET | 65° | 17.5/18.0 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

2690 x 253 x 147 mm

Weight without brackets

105.9 x 10.0 x 5.8 in

25 kg

Survival wind speed

55 lbs

200 km/hr

Operational wind speed

124 mph

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 580, Side: 480, Rear: 910 N

Shroud / Housing

100 mph Front:130, Side:108, Rear 205 lbf

Outdoor plastic, RAL7035 / Aluminum

Packaging Packing dimensions

2930 x 350 x 240 mm

Packing weight

115.4 x 13.8 x 9.4 in

33 kg

73 lbs

0.246 m3

Packing volume

8.7 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

5.1 kg

11 lbs

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

5.8 kg

13 lbs

Kit to add mech. downtilt (0-10°)

0900394/00

---

3.1 kg

7 lbs

Wall mount with azimuth pan

0900395/00

---

2.3 kg

5 lbs

Wall mount with mech. tilt & az. pan

0900533/00

---

4.4 kg

10 lbs

Installation Always attach antenna by the three mounting points. Do not install antenna with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-47

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 MHz 5860110

● Dual band antenna with internal diplexer, 2 connectors

5860010 5860010G

● Independent tilt on each band 0-10° / 4-14°

X-Pol | Dual Band VET Diplexed | 65° | 17.3/17.8 dBi

● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5860110 Manual Electrical Tilt Antenna 5860010 Remote Electrical Tilt Antenna (AISG1.1) 5860010G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has two connectors located at the bottom face, marked with colored rings. Low Band (RED rings)

880-960 MHz ports

High Band (BLUE rings)

1710-2170 MHz ports

2 x 7/16 DIN Long Neck Electrical Characteristics Frequency band

Low Band (RED) 880-960 MHz

High Band (BLUE) 1710-1880 MHz

1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

65°

64°

Vertical beamwidth

7°

6°

6°

16.8-17.3 dBi 16.8-17.3 dBi 16.7-17.2 dBi

17.0-17.3 dBi 16.9-17.1 dBi 16.9-17.0 dBi

17.3-17.8 dBi 17.1-17.6 dBi 17.0-17.4 dBi

Gain 0° downtilt 5° downtilt 10° downtilt

±45°

Electrical downtilt

0-10°

0-10°

Impedance

50Ω

50Ω

VSWR Upper sidelobe rejection Front-to-Back ratio

< 1.4

< 1.4

18 dB typical

18 dB typical

> 30 dB

> 30 dB

Isolation between ports

> 30 dB

> 30 dB

Isolation between bands

45 dB typical

45 dB typical

< -110 dBm

< -110 dBm

200 W

160 W

IM3 (2x20W carrier) Maximum power per port Electrical Downtilt Control

Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override).

RET module part number

MDCU-A0001 MDCU-G0001

Compliant to AISG1.1 Compliant to 3GPP/AISG2.0

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-48

880-960 / 1710-2170 MHz 5860110 5860010 5860010G X-Pol | Dual Band VET Diplexed | 65° | 17.3/17.8 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

2690 x 253 x 147 mm

Weight without brackets

105.9 x 10.0 x 5.8 in

25 kg

Survival wind speed

55 lbs

200 km/hr

Operational wind speed

124 mph

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 580, Side: 480, Rear: 910 N

Shroud / Housing

100 mph Front:130, Side:108, Rear 205 lbf

Outdoor plastic, RAL7035 / Aluminum

Packaging Packing dimensions

2930 x 350 x 240 mm

Packing weight

115.4 x 13.8 x 9.4 in

33 kg

73 lbs

0.246 m3

Packing volume

8.7 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

5.1 kg

11 lbs

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

5.8 kg

13 lbs

Kit to add mech. downtilt (0-10°)

0900394/00

---

3.1 kg

7 lbs

Wall mount with azimuth pan

0900395/00

---

2.3 kg

5 lbs

Wall mount with mech. tilt & az. pan

0900533/00

---

4.4 kg

10 lbs

Installation Always attach antenna by the three mounting points. Do not install antenna with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-49

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 MHz 5863100

● Dual band antenna, 4 connectors

5863000 5863000G

● Independent tilt on each band 0-10° / 0-10°

X-Pol | Dual Band VET | 65° | 16.5/18.1 dBi

● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5863100 Manual Electrical Tilt Antenna 5863000 Remote Electrical Tilt Antenna (AISG1.1) 5863000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has four connectors located at the bottom face, marked with colored rings. Low Band (RED rings)

880-960 MHz ports

2 x 7/16 DIN Long Neck

High Band (BLUE rings)

1710-2170 MHz ports

2 x 7/16 DIN Long Neck

Electrical Characteristics Frequency band

Low Band (RED) 880-960 MHz

High Band (BLUE) 1710-1880 MHz

1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

65°

64°

Vertical beamwidth

9°

6°

6°

16.0-16.5 dBi 16.0-16.5 dBi 15.9-16.4 dBi

17.3-17.6 dBi 17.2-17.4 dBi 17.2-17.3 dBi

17.6-18.1 dBi 17.4-17.9 dBi 17.3-17.7 dBi

Gain 0° downtilt 5° downtilt 10° downtilt

±45°

Electrical downtilt

0-10°

0-10°

Impedance

50Ω

50Ω

VSWR Upper sidelobe rejection Front-to-Back ratio

< 1.4

< 1.4

18 dB typical

18 dB typical

> 30 dB

> 30 dB

Isolation between ports

> 30 dB

> 30 dB

Isolation between bands

45 dB typical

45 dB typical

< -110 dBm

< -110 dBm

200 W

160 W

IM3 (2x20W carrier) Maximum power per port Electrical Downtilt Control

Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override).

RET module part number

MDCU-A0001 MDCU-G0001

Compliant to AISG1.1 Compliant to 3GPP/AISG2.0

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-50

880-960 / 1710-2170 MHz 5863100 5863000 5863000G X-Pol | Dual Band VET | 65° | 16.5/18.1 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

1910 x 253 x 147 mm

Weight without brackets

75.2 x 10.0 x 5.8 in

16 kg

Survival wind speed

35 lbs

200 km/hr

Operational wind speed

124 mph

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 413, Side: 347, Rear: 649 N

Shroud / Housing

100 mph Front: 93, Side: 78, Rear: 146 lbf

Outdoor plastic, RAL7035 / Aluminum

Packaging Packing dimensions

2130 x 350 x 240 mm

Packing weight

83.9 x 13.8 x 9.4 in

23 kg

51 lbs

0.180 m3

Packing volume

6.4 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900181/00

48-115 mm

1.9-4.5 in

3.4 kg

7.5 lbs

Mounting bracket kit

0900182/00

70-150 mm

2.8-5.9 in

3.9 kg

8.6 lbs

Kit to add mech. downtilt (0-10°)

0900188/00

---

1.5 kg

3.3 lbs

Wall mount with azimuth pan

0900183/00

---

1.6 kg

3.5 lbs

Wall mount with mech. tilt & az. pan

0900885/00

---

3.3 kg

7.3 lbs

Installation Do not install antenna with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-51

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 MHz 5863903

● Tri-sector, “monopole” dual band antenna, 4 connectors

5863803 5863803G

● Independent tilt on each band 0-10° / 0-10°

X-Pol | Dual Band VET TRIO | 65° | 16.5/18.0 dBi With Individual Azimuth Panning (±15°)

● Independent azimuth panning ±15° on each sector ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Very small diameter: 388 mm (15.3 in) Model number options: 5863903 Manual Electrical Tilt Antenna 5863803 Remote Electrical Tilt Antenna (AISG1.1) 5863803G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

General Description The antenna contains three dual band antennas installed at 120° in a cylindrical shroud with ±15° azimuth panning capability. A service area at the bottom allows access to the connectors and manual adjustments of the electrical downtilts and azimuth panning. Access Ports Description (Connectors) Each sector has four connectors located inside the service area and marked with colored rings. Low Band (RED rings)

880-960 MHz ports

2 x 7/16 DIN Long Neck

High Band (BLUE rings)

1710-2170 MHz ports

2 x 7/16 DIN Long Neck

Electrical Characteristics Frequency band

Low Band (RED) 880-960 MHz

High Band (BLUE) 1710-1880 MHz

1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

65°

64°

Vertical beamwidth

9°

6°

6°

16.0-16.5 dBi 16.0-16.5 dBi 15.9-16.4 dBi

17.3-17.6 dBi 17.2-17.4 dBi 17.2-17.3 dBi

17.6-18.1 dBi 17.4-17.9 dBi 17.3-17.7 dBi

Gain 0° downtilt 5° downtilt 10° downtilt

±45°

Electrical downtilt

0-10°

Impedance

50Ω

50Ω

VSWR

< 1.4

< 1.4

18 dB typical

18 dB typical

Upper sidelobe rejection

0-10°

Front-to-Back ratio

> 30 dB

> 30 dB

Isolation between ports

> 30 dB

> 30 dB

Isolation between bands

45 dB typical

45 dB typical

< -110 dBm

< -110 dBm

200 W

160 W

IM3 (2x20W carrier) Maximum power per port Electrical Downtilt Control

Electrical downtilt can be controlled separately for low band and high band. The two tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override). RET module part number

MDCU-A0001 MDCU-G0001

Compliant to AISG1.1 (3 units included in 5880803) Compliant to 3GPP/AISG2.0 (3 units included in 5880803G)

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenolantennas.com

B-52

696-900 MHz 5863903 5863803 5863803G X-Pol | Dual Band VET TRIO | 65° | 16.5/18.0 dBi With Individual Azimuth Panning (±15°) Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Overall Dimensions Height x Diameter

2291 x 388 mm

Weight

90.2 x 15.3 in

68 kg

Survival wind speed

150 lbs

200 km/hr

124 mph

Operational wind speed

160 km/hr

100 mph

Wind load @ 160 km/hr (100 mph)

428 N

Shroud / Housing

96 lbf

Outdoor plastic, RAL7035 / Aluminum

Mounting Accessories (to be ordered separately) Item:

Description:

TRIO extension / Mounting mast

Height=85 cm (33.5 in), Diameter=388 mm (15.3 in) Same outside material as antenna Can house three TMAs

TRIO-Pack:

Part Number:

In line jumpers output

TRX380-E085-001

Radial jumpers output

TRX380-E085-002

Antenna delivered with a non-penetrating platform

Bottom View Inside Service Area

Contact Us

Mounting Flange Interface

Six curved slots 11.5 mm (0.5”) wide on a 260 mm (10.2”) diameter circle

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-53

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 / 1710-2170 MHz 5876100

● Triple band antenna, dual polarization, 6 connectors

5876000 5876001G

● Independent tilt on each band 0-14° / 0-10° / 0-10°

XXX-Pol | VET Panel | 65° | 14.5 / 14.0 dBi

● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5880100 Manual Electrical Tilt Antenna 5880000 Remote Electrical Tilt Antenna (AISG1.1) 5880000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has six connectors located at the bottom face, marked with colored rings. 880-960 MHz ports

2 x 7/16 DIN Long Neck

High Band (WHITE rings)

1710-2170 MHz ports

2 x 7/16 DIN Ultra Long Neck

High Band (BLUE rings)

1710-2170 MHz ports

2 x 7/16 DIN Long Neck

Electrical Characteristics

Low Band (RED)

Frequency band

880-960 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth Gain - mid tilt

13° 14.5 ± 0.5 dBi

High Band (WHITE)

High Band (BLUE)

1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz ±45°

±45°

65°

63°

65°

63°

15°

13°

15°

13°

13.5 ± 0.5 dBi 14.0 ± 0.5 dBi 13.5 ± 0.5 dBi 14.0 ± 0.5 dBi

Electrical downtilt

0-14°

0-10°

0-10°

Impedance

50Ω

50Ω

50Ω

VSWR Upper sidelobe rejection

< 1.5

< 1.5

< 1.5

15 dB typical

15 dB typical

15 dB typical

Front-to-Back ratio

> 22 dB

> 25 dB

> 25 dB

Isolation between ports

> 25 dB

> 25 dB

> 25 dB

Isolation between bands IM3 (2x20W carrier) Maximum power per port

PRELIMINARY

Low Band (RED rings)

> 35 dB

> 35 dB

> 35 dB

< -110 dBm

< -110 dBm

< -110 dBm

200 W

160 W

160 W

Electrical Downtilt Control Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override). RET module part number

MDCU-A0002 MDCU-G0002

Compliant to AISG1.1 (one unit included in 5876000) Compliant to 3GPP/AISG2.0 (one unit included in 5876001G)

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0909

www.amphenol-jaybeam.com

B-54

880-960 / 1710-2170 / 1710-2170 MHz 5876100 5876000 5876001G XXX-Pol | VET Panel | 65° | 14.5 / 14.0 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

1500 x 253 x 147 mm

Weight without brackets

59.1 x 10.0 x 5.8 in

17 kg

37.5 lbs

Survival wind speed

200 km/hr

Operational wind speed

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 330 N

100 mph Front: 74.2 lbf

PRELIMINARY

Shroud / Housing

124 mph

Outdoor plastic, RAL7035

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

5.1 kg

1.9-4.5 in

11 lbs

Installation Always attach antenna by the three mounting points. Do not install with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-55

www.amphenol-jaybeam.com

REV0909

880-960 / 1710-2170 / 1710-2170 MHz 5880100

● Triple band antenna, 6 connectors

5880000 5880000G

● Independent tilt on each band 0-10° / 0-12° / 0-12°

XXX-Pol | VET Panel | 65° | 17.5 dBi

● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5880100 Manual Electrical Tilt Antenna 5880000 Remote Electrical Tilt Antenna (AISG1.1) 5880000G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has six connectors located at the bottom face, marked with colored rings. Low Band (RED rings)

880-960 MHz ports

2 x 7/16 DIN Long Neck

High Band (WHITE rings)

1710-2170 MHz ports Pattern optimized for DCS1800

2 x 7/16 DIN Ultra Long Neck

High Band (BLUE rings)

1710-2170 MHz ports Pattern optimized for UMTS2100

2 x 7/16 DIN Long Neck

Electrical Characteristics

Low Band (RED)

Frequency band

880-960 MHz

High Band (WHITE)

High Band (BLUE)

1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

65°

62°

65°

62°

Vertical beamwidth

7°

7°

7°

7°

7°

17.0-17.5 dBi 17.0-17.5 dBi 16.9-17.4 dBi

16.5-16.7 dBi 16.3-16.5 dBi 16.0-16.3 dBi

16.7-17.2 dBi 16.5-17.0 dBi 16.3-16.5 dBi

16.5-16.9 dBi 16.4-16.7 dBi 16.3-16.5 dBi

16.9-17.3 dBi 16.7-17.2 dBi 16.5-17.0 dBi

Gain 0° downtilt 5° downtilt 10° downtilt

±45°

±45°

Electrical downtilt

0-10°

0-12°

Impedance

50Ω

50Ω

50Ω

VSWR

< 1.4

< 1.4

< 1.4 18 dB typical

Upper sidelobe rejection

0-12°

18 dB typical

18 dB typical

Front-to-Back ratio

> 30 dB

> 30 dB

> 30 dB

Isolation between ports

> 30 dB

> 30 dB

> 30 dB

Isolation between bands

45 dB typical

45 dB typical

45 dB typical

< -110 dBm

< -110 dBm

< -110 dBm

200 W

160 W

160 W

IM3 (2x20W carrier) Maximum power per port Electrical Downtilt Control

Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override). RET module part number

MDCU-A0002 MDCU-G0002

Compliant to AISG1.1 Compliant to 3GPP/AISG2.0

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-56

880-960 / 1710-2170 / 1710-2170 MHz 5880100 5880000 5880000G XXX-Pol | VET Panel | 65° | 17.5 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

2690 x 253 x 147 mm

105.9 x 10.0 x 5.8 in

Weight without brackets

27.5 kg

Survival wind speed

200 km/hr

Operational wind speed

61 lbs 124 mph

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 580, Side: 480, Rear: 910 N

Shroud / Housing

100 mph Front: 130, Side: 108, Rear: 205 lbf

Outdoor plastic, RAL7035 / Aluminum

Packaging Packing dimensions

2930 x 350 x 240 mm

Packing weight

115.4 x 13.8 x 9.4 in

35 kg

77 lbs

0.246 m3

Packing volume

8.7 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

5.1 kg

11 lbs

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

5.8 kg

13 lbs

Kit to add mech. downtilt (0-10°)

0900394/00

---

3.1 kg

7 lbs

Wall mount with azimuth pan

0900395/00

---

2.3 kg

5 lbs

Wall mount with mech. tilt & az. pan

0900533/00

---

4.4 kg

10 lbs

Installation Always attach antenna by the three mounting points. Do not install with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-57

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-2170 / 1710-2170 696-900 MHz

ANTENNA SOLUTIONS

5880110

● Triple band antenna, 4 connectors

5880010 5880010G

● Low Band and one High Band diplexed for common feeder sharing

XXX-Pol Diplexed | VET Panel | 65° | 17.3 dBi

● Independent tilt on each band 0-10° / 0-12° / 0-12° ● Slimline profile for low wind load ● MET and RET versions, AISG1.1 or 3GPP/AISG2.0 ● Single RET module to control all tilt angles Model number options: 5880110 Manual Electrical Tilt Antenna 5880010 Remote Electrical Tilt Antenna (AISG1.1) 5880010G Remote Electrical Tilt Antenna (3GPP/AISG2.0)

Access Ports Description (Connectors) The antenna has four connectors located at the bottom face, marked with colored rings. Low Band (RED) and High Band (WHITE) are diplexed and share the same connectors. Low Band (RED rings)

880-960 MHz ports

High Band (WHITE rings)

1710-2170 MHz ports Pattern optimized for DCS1800

High Band (BLUE rings)

1710-2170 MHz ports Pattern optimized for UMTS2100

Electrical Characteristics

Low Band (RED)

Frequency band

880-960 MHz

2 x 7/16 DIN Long Neck

2 x 7/16 DIN Long Neck

High Band (WHITE)

High Band (BLUE)

1710-1880 MHz 1900-2170 MHz 1710-1880 MHz 1900-2170 MHz

Polarization

±45°

Horizontal beamwidth

65°

65°

62°

65°

62°

Vertical beamwidth

7°

7°

7°

7°

7°

16.8-17.3 dBi 16.8-17.3 dBi 16.7-17.2 dBi

16.3-16.5 dBi 16.1-16.3 dBi 15.8-16.1 dBi

16.5-17.0 dBi 16.3-16.8 dBi 16.1-16.3 dBi

16.5-16.9 dBi 16.4-16.7 dBi 16.3-16.5 dBi

16.9-17.3 dBi 16.7-17.2 dBi 16.5-17.0 dBi

Gain 0° downtilt 5° downtilt 10° downtilt

±45°

±45°

Electrical downtilt

0-10°

0-12°

Impedance

50Ω

50Ω

50Ω

VSWR

< 1.4

< 1.4

< 1.4 18 dB typical

Upper sidelobe rejection

0-12°

18 dB typical

18 dB typical

Front-to-Back ratio

> 30 dB

> 30 dB

> 30 dB

Isolation between ports

> 30 dB

> 30 dB

> 30 dB

Isolation between bands

45 dB typical

45 dB typical

45 dB typical

< -110 dBm

< -110 dBm

< -110 dBm

200 W

160 W

160 W

IM3 (2x20W carrier) Maximum power per port Electrical Downtilt Control

Electrical downtilt can be controlled separately for low band (RED), high band (WHITE) and high band (BLUE). The three tilt indicators are covered by a removable transparent cap. Manual control: A colored knob at the end of the tilt indicator allows change of the tilt without need for a tool. Knob color is identical to connector colors as defined above. To access the knob, the cap is removed by turning it counter clockwise. It is re-installed by opposite rotation. Remote control: The remote control of the electrical tilt is managed by a module (MDCU) totally inserted at the bottom of the antenna. One single module controls individually the tilt of each band (no need of daisy chain cables between the bands). For RET control, the transparent cap must be in place and locked. This module does not add any additional length at the bottom of the antenna. The tilt angle indicator stays always visible and the antenna still has manual tilt control (manual override). RET module part number

MDCU-A0002 MDCU-G0002

Compliant to AISG1.1 Compliant to 3GPP/AISG2.0

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-58

880-960 / 1710-2170 / 1710-2170 MHz 5880110 5880010 5880010G XXX-Pol Diplexed | VET Panel | 65° | 17.3 dBi Environmental Operating temperature range

-40° to +60° C

Environmental

-40° to +140° F

ETS 300 019

RoHS compliant

Yes

Mechanical Characteristics Dimensions HxWxD

2690 x 253 x 147 mm

105.9 x 10.0 x 5.8 in

Weight without brackets

27.5 kg

Survival wind speed

200 km/hr

Operational wind speed

61 lbs 124 mph

160 km/hr

Wind load @ 160 km/hr (100 mph)

Front: 580, Side: 480, Rear: 910 N

Shroud / Housing

100 mph Front: 130, Side: 108, Rear: 205 lbf

Outdoor plastic, RAL7035 / Aluminum

Packaging Packing dimensions

2930 x 350 x 240 mm

Packing weight

115.4 x 13.8 x 9.4 in

35 kg

77 lbs

0.246 m3

Packing volume

8.7 ft3

Mounting Options (Installation accessories to be ordered separately) Description:

Part number:

Fits pipe diameter:

Weight:

Mounting bracket kit

0900393/00

48-115 mm

1.9-4.5 in

5.1 kg

11 lbs

Mounting bracket kit

0900501/00

70-150 mm

2.8-5.9 in

5.8 kg

13 lbs

Kit to add mech. downtilt (0-10°)

0900394/00

---

3.1 kg

7 lbs

Wall mount with azimuth pan

0900395/00

---

2.3 kg

5 lbs

Wall mount with mech. tilt & az. pan

0900533/00

---

4.4 kg

10 lbs

Installation Always attach antenna by the three mounting points. Do not install with the connectors facing upward.

Bottom View

Location of the MDCU for RET control

Tilt indicator covered by a transparent cap. Manual adjustment is accessed by removing the cap. Knob color is same as connectors. For RET control, the cap must be in place.

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-59

www.amphenol-jaybeam.com

REV0809

880-960 / 1710-1880 / 1900-2170 MHz 7691300

Two wide band crossed dipoles ±45° polarisation. Small panel wall mounted indoor and outdoor applications.

X-Pol | 80°/60°/60° | 7.0/8.0/8.0 dBi

Electrical Characteristics Frequency bands

880-960 MHz

1710-1880 MHz

1900-2170 MHz

Polarization

±45°

±45°

±45°

Horizontal beamwidth (-3 dB)

80°

60°

60°

7.0 dBi (4.9 dBd)

8.0 dBi (5.9 dBd)

8.0 dBi (5.9 dBd)

Gain Impedance

VSWR

50Ω GSM GSM (Tx band) PCN UMTS

Front-to-Back ratio

> 20 dB

Isolation between ports

> 23 dB

Input power Input connector type / Location

< 2.1:1 < 1.5:1 < 1.5:1 < 1.5:1

25 W max per port N Female, 0.50m Flylead of RG303

Mechanical Characteristics Dimensions HxWxD Weight

205 x 221 x 65 mm

8.1 x 8.7 x 2.6 in

0.5 kg

1.1 lbs

Mounting Options Mounting

Wall mount standard - stainless steel plate 4 screw holes

Horizontal | 930 MHz

Horizontal | 1800 MHz

Horizontal | 2100 MHz

Vertical | 930 MHz

Vertical | 1800 MHz

Vertical | 2100 MHz

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0909

www.amphenol-jaybeam.com

B-60

800-2700 MHz 7825100 V-Pol | Omni | 2.5 dBi

Electrical Characteristics Frequency band

800-2700 MHz

Polarization

Vertical

Horizontal beamwidth

Omnidirectional

Vertical beamwidth

50°

Gain

2.5 dBi

Impedance

50Ω 800-960 MHz 960-1710 MHz 1710-2700 MHz

VSWR Input power

< 1.8:1 < 2.5:1 < 1.8:1

50 W

Connector type / Location

N-Female / Bottom

Mechanical Characteristics Dimensions (L x Ø)

Including connector:

Weight

175 x 28 mm 205 x 28 mm

6.9 x 1.1 in 8.1 x 1.1 in

0.12 kg

0.26 lbs

11 N

2.5 lbf

Wind load @ 160 km/hr (100 mph) Radome color

Universal Mounting Kit

White 4 x 3.4mm (0.135 in) dia. holes equally spaced on a 41mm (1.614 in) dia. bolt circle.

Mounting interface Mounting Options

Part Number

Fits Pipe Dia.

Mounting kit

505-173-5-003

Universal wall / ceiling mount

---

Mounting kit

XSL9254316

Wall mount

---

Mounting kit

XSL9254317

Wall or pole mount

30-53 mm

(Drawings are not to scale.)

Horizontal | 800-960 MHz

Horizontal | 1710-2170 MHz

Vertical | 800-960 MHz

Vertical | 1710-2170 MHz

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0909

www.amphenol-jaybeam.com

B-61

2400-2700 MHz BMX065X13x000

Replace “x” with the following electrical tilt options: M - Manual Electrical Tilt = BMX065X13M000 R - Remote Electrical Tilt = BMX065X13R000

X-Pol | VET Panel | 65° | 17.5 dBi

Electrical Characteristics Frequency bands

2400-2700 MHz

Polarization

±45°

Horizontal beamwidth

65°

Vertical beamwidth

6°

Gain

15.4 dBd / 17.5 dBi

Electrical downtilt

2° - 10°

Impedance

50Ω

VSWR

< 1.37:1

1st upper sidelobe

30 dB

Isolation between ports

>25 dB

IM3 (2x20W carrier)

< -153 dBc

Input power

2 x 300 W

Connector(s)

2 Ports / 7/16-DIN / Female / Bottom

Operating temperature

-40° to +60° C (-40° to 140° F)

Mechanical Characteristics Dimensions HxWxD

1372 x 170 x 100 mm

Weight without brackets

6.8 kg

Survival wind speed

241 km/hr

Wind load @ 161 km/hr (100 mph) Mounting Options

Front:

285 N

54.0 x 6.7 x 3.9 in 15 lbs 150 mph

Side: 166 N

Part Number

Front:

64 lbf

Side: 37 lbf

Fits Pipe Diameter

Weight

Pole mounting kit

MKS02P01

50-115 mm

2.0-4.5 in

2.9 kg

Scissor tilt mounting kit

MKS02T06

50-115 mm

2.0-4.5 in

3.8 kg

6.5 lbs 8.3 lbs

Bar tilt mounting kit

MKS02T07

50-115 mm

2.0-4.5 in

3.9 kg

8.7 lbs

Concealment Options UNICELL module Azimuth Swivel Elevation Tilt Required Mounting Kit

UNX14-14 UNX14-19 (Antenna + RET)

UNX20-14 UNX20-19 (Antenna + RET)

±25° Azimuth Swivel

±30° Azimuth Swivel

Fixed Elevation

Fixed Elevation

Included with Unicell

UNX20-AZ

-90

-90 -60

-120

-150

35

30

25

20

15

10

150

5

0

30

120

35

25

20

15

10

5

0

120

-30

35

180

30

90

-90

60

120

35

30

25

20

150

15

10

5

30

120

60 90

6° | Vertical

0

5

35

30

25

20

150

-150

15

10

5

0

30

120

-60

60 90

8° | Vertical

-30

35

180

30

25

20

150

15

10

5

30

120

60 90

10° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

0

-90

-30

180

10

60

-120

-150

-30

15

4° | Vertical

-60

-120

-150

20

90

-90 -60

25

30

2° | Vertical

-120

30

150

90

Horizontal

180

30

150

60

-150

-30

180

-60

-120

-150

-30

180

-90 -60

-120

www.amphenol-jaybeam.com

B-62

0

2400-2700 MHz BMX090X13x000

Replace “x” with the following electrical tilt options: M - Manual Electrical Tilt = BMX090X13M000 R - Remote Electrical Tilt = BMX090X13R000

X-Pol | VET Panel | 90° | 16.3 dBi

Electrical Characteristics Frequency bands

2400-2700 MHz

Polarization

±45°

Horizontal beamwidth

93°

Vertical beamwidth

5.8°

Gain

14.2 dBd / 16.3 dBi

Electrical downtilt

2° - 10°

Impedance

50Ω

VSWR

< 1.37:1

1st upper sidelobe

26 dB

Isolation between ports

>25 dB

IM3 (2x20W carrier)

< -153 dBc

Input power

2 x 300 W

Connector(s)

2 Ports / 7/16-DIN / Female / Bottom

Operating temperature

-40° to +60° C (-40° to +140° F)

Mechanical Characteristics Dimensions HxWxD

1372 x 170 x 100 mm

Weight without brackets

6.8 kg

Survival wind speed

241 km/hr

Wind load @ 161 km/hr (100 mph)

Front: 285 N

Mounting Options

Part Number

54.0 x 6.7 x 3.9 in 15 lbs 150 mph

Side: 166 N

Front: 64 lbf

Side: 37 lbf

Fits Pipe Diameter

Weight

Pole mounting kit

MKS02P01

50-115 mm

2.0-4.5 in

2.9 kg

Scissor tilt mounting kit

MKS02T06

50-115 mm

2.0-4.5 in

3.8 kg

6.5 lbs 8.3 lbs

Bar tilt mounting kit

MKS02T07

50-115 mm

2.0-4.5 in

3.9 kg

8.7 lbs

Concealment Options UNX14-14 UNX14-19 (Antenna + RET)

UNICELL module

UNX20-14 UNX20-19 (Antenna + RET)

Azimuth swivel

±25°

±30°

Elevation tilt

Fixed

Fixed

Included

UNX20-AZ

FP mounting configuration

-90

-90 -60

-120

-150

35

30

25

20

15

10

150

5

0

30

120

35

25

20

15

10

5

0

120

-30

35

180

30

90

-90

60

120

35

30

25

20

150

15

10

5

30

120

60 90

6° | Vertical

0

5

35

30

25

20

150

-150

15

10

5

0

30

120

-60

60 90

8° | Vertical

-30

35

180

30

25

20

150

15

10

5

30

120

60 90

10° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

0

-90

-30

180

10

60

-120

-150

-30

15

4° | Vertical

-60

-120

-150

20

90

-90 -60

25

30

2° | Vertical

-120

30

150

90

Horizontal

180

30

150

60

-150

-30

180

-60

-120

-150

-30

180

-90 -60

-120

www.amphenol-jaybeam.com

B-63

0

870-960 MHz GSM3X75-13-A X-Pol | VET TRIO | 75° | 14.5 dBi Electrical Characteristics Frequency band

870-960 MHz

Polarization

±45°

Horizontal beamwidth

73° (±5° each beam nominally)

Vertical beamwidth

14.5° (±1.5°)

Gain

14.5 dBi per sector

Electrical downtilt

2-12°

Impedance

50Ω

VSWR

< 1.4:1

1st upper side lobe

-16 dB typical

Inter-port isolation

> 25 dB any pair of ports

IM3 (2x20W carrier)

< -153 dBc

Maximum power per port

2 x 250 W per sector

Connector(s) Operating temperature

6 ports / 7/16 DIN / Female / Bottom -40° to +140° F

-40° to +140° F

Mechanical Characteristics Overall Dimensions Height x Diameter (less lightning finial)

1905 x 230 mm

Array Height Access Panel Height x Diameter Lightning finial

75.0 x 9.1 in

1350 mm

53.0 in

430 x 230 mm

16.9 x 9.1 in

220 x 8 mm

8.6 x 0.3 in

Weight - Antenna

20 kg

44 lbs

Weight - Adaptor

TBD kg

TBD lbs

Wind speed - Survival

200 km/hr

124 mph

Wind load @ 160 km/hr (100 mph)

345 N

77.6 lbf

Mounting Mounting adaptor

Horizontal Plane

Integral base flange adaptor supplied

Vertical Plane

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

www.amphenol-jaybeam.com

B-64

1710-2170 MHz W85-13-x010

Replace “x” with the following electrical tilt options: A - Manual Electrical Tilt = W85-13-A010 R - Remote Electrical Tilt = W85-13-R010

Electrical Characteristics

X-Pol | VET Panel | 85° | 17.0 dBi

1710-2170 MHz

Frequency bands

1710-1880 MHz

1850-1990 MHz

1900-2170 MHz

Polarization

±45°

±45°

±45°

Horizontal beamwidth

85°

85°

85°

Vertical beamwidth

7.3°

6.8°

6.3°

14.1 dBd / 16.2 dBi

14.5 dBd / 16.6 dBi

15.9 dBd / 17.0 dBi

Gain Electrical downtilt

0°-10°

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe suppression

< -16 dB

Front-to-Back ratio

> 25 dB

Isolation between ports

> 28 dB

IM3 (2x20W carrier)

< -153 dBc

Input power

2 x 200 W

Connector(s)

2 Ports / 7/16-DIN / Female / Bottom

Operating temperature

-40° to +60° C (-40° to +140° F)

Mechanical Characteristics Dimensions HxWxD

1385 x 170 x 100 mm

Weight without brackets Survival wind speed Wind load @ 161 km/hr (100 mph)

Front:

288 N

54.5 x 6.7 x 3.9 in

7 kg

15.4 lbs

> 241 km/hr

> 150 mph

Side: 167 N

RET type / part number

Front:

65 lbf

Side: 38 lbf

External / RETU-EA01

Mounting Options

Part Number

Fits Pipe Diameter

Pole mounting kit

MKS02P01

40-115 mm

2.0-4.5 in 2.9 kg

Weight 6.5 lbs

Scissor tilt mounting kit

MKS02T06

40-115 mm

2.0-4.5 in 3.8 kg

8.3 lbs

Bar tilt mounting kit

MKS02T07

40-115 mm

2.0-4.5 in 3.9 kg

8.7 lbs

Concealment Options UNICELL module Azimuth swivel Elevation tilt Required mounting kit

UNX14-14 UNX14-19 (Antenna + RET) ± 25° Fixed

UNX20-14 UNX20-19 (Antenna + RET) ± 30° Fixed

Included

UNX20-AZ

1800 MHz

1900 MHz

-90 -60

-120

30

25

20

15

10

150

5

0

30

120

35

25

20

15

10

5

0

120

-30

35

180

30

90

-90

60

120

35

30

25

20

150

15

10

5

30

120

60 90

0° | Vertical

0

5

35

30

25

20

150

-150

15

10

5

0

30

120

-60

60 90

0° | Vertical

-30

35

180

30

25

20

150

15

10

5

30

120

60 90

0° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

0

60

-120

-30

180

10

-90 -60

-150

-30

15

Horizontal

-120

-150

20

90

-90 -60

25

30

Horizontal

-120

30

150

90

Horizontal

180

30

150

60

-150

-30

180

-60

-120

-150

-30

35

-90 -60

-120

-150

180

2100 MHz

-90

www.amphenol-jaybeam.com

B-65

0

1710-2170 MHz W85-13-x10 X-Pol | VET Panel | 85° | 17.0 dBi

1800 MHz

1900 MHz

-90

30

25

20

15

10

150

5

0

30

120

35

120

10

5

0

35

180

120

35

30

25

20

15

10

150

5

0

30

120

35

30

25

20

15

10

150

60

120

5

0

-30

35

180

60

120

35

30

25

20

15

10

150

5

0

30

120

35

30

25

20

15

10

150

60

5

0

120

-30

35

180

60

6° | Vertical

120

35

30

25

20

15

10

150

5

0

120

35

30

25

20

15

10

150

30

120

60

5

0

-30

35

180

60

120

-60

35

30

25

20

150

15

10

5

30

120

60 90

10° | Vertical

0

5

0

60

35

30

25

20

150

15

10

5

30

120

-60

-120

-150

-30

180

10

-90 -60

-150

-30

15

8° | Vertical

-120

-150

20

90

-90

-120

25

30

8° | Vertical

-90

30

150

90

8° | Vertical

0

-60

-150

30

90

5

-90 -120

-30

180

10

6° | Vertical -60

-150

-30

15

60

-90

-150

20

90

-120

-60

25

30

6° | Vertical

-90

30

150

90

-120

0

-60

-150

30

90

5

60

-120

-30

180

10

-90 -60

-150

-30

15

4° | Vertical

-120

-150

20

90

-90 -60

25

30

4° | Vertical

-120

30

150

90

-90

0

-60

-150

30

4° | Vertical

5

60

-120

-30

90

10

-90 -60

180

15

2° | Vertical

-150

-30

20

90

-120

-150

25

30

-90 -60

30

150

2° | Vertical

-120

180

15

60

-90

180

20

-30

90

2° | Vertical

180

25

30

90

180

30

150

60

-150

-30

180

-60

-120

-150

-30

35

-90 -60

-120

-150

180

2100 MHz

-90 -60

-120

60 90

10° | Vertical

0

-30

35

180

30

25

20

150

15

10

5

0

30

120

60 90

10° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on -79structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-66

www.amphenol-jaybeam.com

REV0809

1710-2170 MHz W85-19-x28

Replace “x” with the following electrical tilt options: A - Manual Electrical Tilt = W85-19-A28 R - Remote Electrical Tilt = W85-19-R28

Electrical Characteristics

X-Pol | VET Panel | 85° | 18.3 dBi

1710-2170 MHz

Frequency bands

1710-1880 MHz

1850-1990 MHz

1900-2170 MHz

Polarization

±45°

±45°

±45°

Horizontal beamwidth

85°

85°

85°

Vertical beamwidth

5.3°

5.1°

4.7°

15.4 dBd / 17.5 dBi

15.7 dBd / 17.8 dBi

16.2 dBd / 18.3 dBi

Gain Electrical downtilt

2° - 8°

Impedance

50Ω

VSWR

< 1.4:1

Upper sidelobe suppression

< -18 dB

Front-to-Back ratio

> 25 dB

Isolation between ports

> 28 dB

IM3 (2x20W carrier)

< -153 dBc

Input power

2 x 200 W

Connector(s)

2 Ports / 7/16-DIN / Female / Bottom

Operating temperature

-40° to +60° C (-40° to +140° F)

Mechanical Characteristics Dimensions HxWxD

1935 x 170 x 100 mm

Weight without brackets

11.0 kg

Survival wind speed

241 km/hr

Wind load @ 161 km/hr (100 mph)

Front:

402 N

76.2 x 6.7 x 3.9 in 24.3 lbs 150 mph

Side: 234 N

RET type / part number

Front:

90 lbf

Side: 53 lbf

External / RETU-EA01

Mounting Options

Part Number

Fits Pipe Diameter

Weight

Pole mounting kit

MKS02P01

40-115 mm

2.0-4.5 in

2.9 kg

6.5 lbs

Scissor tilt mounting kit

MKS02T06

40-115 mm

2.0-4.5 in

3.8 kg

8.3 lbs

Bar tilt mounting kit

MKS02T07

40-115 mm

2.0-4.5 in

3.9 kg

8.7 lbs

Concealment Options UNX14-19 (Antenna + RET)

UNICELL module

UNX20-19 (Antenna + RET)

Azimuth swivel

± 25°

± 30°

Elevation tilt

Fixed

Fixed

Included

UNX20-AZ

Required mounting kit

1800 MHz

1900 MHz

-90 -60

-120

30

25

20

15

10

150

5

0

30

120

35

25

20

15

10

5

0

120

-30

35

180

30

90

-90

60

120

35

30

25

20

150

15

10

5

30

120

60 90

2° | Vertical

0

5

35

30

25

20

150

-150

15

10

5

0

30

120

-60

60 90

2° | Vertical

-30

35

180

30

25

20

150

15

10

5

30

120

60 90

2° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

REV0809

0

60

-120

-30

180

10

-90 -60

-150

-30

15

Horizontal

-120

-150

20

90

-90 -60

25

30

Horizontal

-120

30

150

90

Horizontal

180

30

150

60

-150

-30

180

-60

-120

-150

-30

35

-90 -60

-120

-150

180

2100 MHz

-90

www.amphenol-jaybeam.com

B-67

0

1710-2170 MHz W85-19-x28 X-Pol | VET Panel | 85° | 18.3 dBi

1800 MHz

1900 MHz

-90

30

25

20

15

10

150

5

0

30

120

35

120

20

15

10

5

0

-30

35

180

-90

60

120

35

30

25

20

15

10

150

5

0

30

120

35

30

25

20

15

10

150

60

120

5

0

-30

35

180

-90

60

120

35

30

25

20

150

15

10

5

30

120

60 90

8° | Vertical

0

5

0

60

35

30

25

20

150

-150

15

10

5

0

30

120

-60

-120

-30

180

10

-90 -60

-150

-30

15

6° | Vertical

-120

-150

20

90

-90 -60

25

30

6° | Vertical

-120

30

150

90

6° | Vertical

0

-60

-150

30

90

5

60

-120

-30

180

10

-90 -60

-150

-30

15

4° | Vertical

-120

-150

20

90

-90 -60

25

30

4° | Vertical

-120

30

150

90

4° | Vertical

180

25

30

90

180

30

150

60

-150

-30

180

-60

-120

-150

-30

35

-90 -60

-120

-150

180

2100 MHz

-90 -60

-120

60 90

8° | Vertical

-30

35

180

30

25

20

150

15

10

5

0

30

120

60 90

8° | Vertical

Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.

B-68

www.amphenol-jaybeam.com

REV0809

Amphenol Telecom Solutions PMR Antennas - Table of Contents ITEM CODE 5001000 5004xxx 5023xxx 5029000 5043xxx 5047xxx 5201xxx 5211388 5227000 5680000 7014385 7014xxx 7018xxx 7019xxx 7029xxx 7031xxx 7034xxx 7039xxx 7040xxx 7041xxx 7042xxx 7043xxx 7047200 7047xxx 7049xxx 7050xxx 7051xxx 7073xxx 7074xxx 7129xxx 7130xxx 71482xx 7148xxx 7170xxx 7175xxx 7176xxx 7177010 7210xxx 7227000 7255xxx 7256xxx 7273xxx 7277010 7323xxx 7345000 7353xxx 7360012 7373xxx 7395xxx 7417xxx 7418xxx 7421xxx 7427xxx

……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ………………………………………………………………………………………..

PAGE NUMBER B-69 B-70 B-71 B-72 B-73 B-74 B-75 B-76 B-77 B-78 B-79 B-80 B-81 B-82 B-83 B-84 B-85 B-86 B-87 B-88 B-89 B-90 B-91 B-92 B-93 B-94 B-95 B-96 B-97 B-98 B-99 B-100 B-101 B-102 B-103 B-104 B-105 B-106 B-107 B-108 B-109 B-110 B-111 B-112 B-113 B-114 B-115 B-116 B-117 B-118 B-119 B-120 B-121

Amphenol Telecom Solutions PMR Antennas - Table of Contents ITEM CODE 7428xxx 7437010 7500xxx 7501xxx 7502xxx 7511xxx 7513xxx 7530xxx 7533xxx 7536xxx 7548xxx 75492xx 7549387 7549xxx 7556xxx 7576xxx 7579000 7586307 75863xx 7586xxx 7636000 7680000 LPU/R-xx MA100K01 MA100LM01 MA100PQ01 MA100RS00 MA411xx MA412D00 MA421H06 MA421H08 MA421H29 MA421LM01 MA421LM02 MA421LM05 MA421PR01 MA421PR03 MA421PR04 MA421PR05 MA421PR06 MA421PR07 MA421RS01 MA421RS02 MA421RS03 MA421RS04 MA421RS05 MA421RS06 MA421RS07 MA431Exx MA431H00 MA431KMxx MA432H0x MA432H1x

……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ………………………………………………………………………………………..

PAGE NUMBER B-122 B-123 B-124 B-125 B-126 B-127 B-128 B-129 B-130 B-131 B-132 B-133 B-134 B-135 B-136 B-137 B-138 B-139 B-140 B-141 B-142 B-143 B-144 B-145 B-146 B-147 B-148 B-149 B-150 B-151 B-152 B-153 B-154 B-155 B-156 B-157 B-158 B-159 B-160 B-161 B-162 B-163 B-164 B-165 B-166 B-167 B-168 B-169 B-170 B-171 B-172 B-173 B-174

Amphenol Telecom Solutions PMR Antennas - Table of Contents ITEM CODE MA432H8x MA432J00 MA432KMxx MA461H01 MA462DS06 MA462DS08 MA481E86 MA481E41 MA481H02 MA481H04 MA481I00 MA481J00 MA481KMxx MA481Q02 MA481QS06 MA481S02 MA491QS10 MA521F00 MA521J00 MMU2xxx MMU3xxx MMU4xxx

……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ……………………………………………………………………………………….. ………………………………………………………………………………………..

PAGE NUMBER B-175 B-176 B-177 B-178 B-179 B-180 B-181 B-182 B-183 B-184 B-185 B-186 B-187 B-188 B-189 B-190 B-191 B-192 B-193 B-194 B-195 B-196

112-156 MHz 5001000 Ground Plane Antenna V-Pol | 360° | 0 dBd

A rugged and durable “lightning proof” VHF Ground Plane antenna designed for VHF AIR BAND applications. The broadband active element is enclosed inside a glassfibre shroud to provide extra protection in harsh environments.

Type

5001000

Electrical Specifications Frequency:

112 MHz to 156 MHz

Gain: VSWR:

0 dBd