2010_July_To_Dec_Training_Brochure.pdf

Technical Training

2010 July - December

Revision Date 5/4/2010

2

Cummins West Training Center 1950 Burroughs Avenue San Leandro, California 94577 Phone: (510) 351-6101 Fax: (510) 895-5781

Training Programs Available for authorized Dealers and Cummins/Onan Customers • • • • • • • • • • •

Theory and Practical Application Training Electronics Overhaul/Repair Systems Troubleshooting Warranty (Authorized Dealers) Marine Cummins Power Generation Programs Product, Parts, Dealer, Technician Updates Customized Training Programs Cummins Onan RV Generators Allison Transmission 3

Training Curriculum for

2010 General Information Introduction: Today’s complex engine, transmission and power generation systems demand high quality interactive classroom and hands-on technical training. We provide affordable training with state-of-the-art equipment, repair procedures, and live engine, transmission and generator troubleshooting. Cummins West Training Center classes are sized and monitored to assure proper student to instructor ratio providing personalized performance based training to all students. Cummins West Training Center delivers the best training because we have the best instructors. Our instructors are highly skilled professionals, educated in training technology, engine and generator knowledge. Through a comprehensive trainer development program, our instructors are provided with a curriculum which teaches instructional concepts, benefiting adult learners with diverse learning styles. Also, Cummins West’s instructors are kept on the leading edge of changing technologies, by attending courses at Cummins Inc, Allison Transmission, and Cummins Power Generation. These classes provide the latest technical information, procedures, and techniques available. This insures each student receives up-to-date information and instruction.

Enrollment Procedures: 1. Phone Cummins West Training Center and Request Only enrollment for a particular course, or. 2. Complete the enclosed Request Only for enrollment 3. Detach and forward to Cummins West Training Center (Mail or Fax). 3. Classes are limited to 6 to 12 students, based on curriculum. 4. Work clothes and safety footwear are recommended. 5. Any questions should be directed to the Training Center at (510) 357-6101.

4

Payment Procedures: 1. Prepayment by check or purchase order is required with enrollment Request Only, or presented by the student prior to the start of class. VISA/MasterCard and AmEx are also accepted. 2. Prior credit approval is necessary for all company purchase orders. 3. Cancellations made less than five (5) working days prior to the class start date will be subjected to a $100.00 cancellation fee. The balance of the tuition may be applied to a future training session. 4. If a student does not attend class and fails to cancel with the Training Center, he/she will be billed for the full amount of the class. 5. Refunds will not be granted after class begins. 6. If, for any reason, the training class is canceled, students may either apply the tuition towards a future training class, or Request Only a refund.

Daily Schedule: Typical program hours are 8:00 a.m. to 4:30 p.m. with ample breaks and a one hour lunch period. Homework may be assigned each evening to help students comprehend the material covered and to increase classroom hands-on time.

Books, Tools, and Supplies: Cummins West Training Center provides the manuals and tools used while attending class. The appropriate handout literature will be given to each student and is included in the tuition cost. We recommend students wear comfortable clothing suitable for working on engines and hardware. NOTE: Shorts, sandals, and sleeveless shirts are not considered appropriate clothing.

Recognition: A Cummins, Allison, or Power Generation certificate will be awarded to each student upon successful completion of the course. In some courses students will be required to take a written test and perform hands-on tasks, and must make a passing score to receive a certificate.

Lodging: Payment for hotel accommodations is the responsibility of the student.

Money Back Guarantee: The guarantee we offer with all our courses is unconditional. If you feel you did not receive expected value from the course, Cummins West Training Center will refund your course fee.

Custom (private) Training Classes: Custom training classes are available and can be designed to meet your needs. For scheduling information please contact the Cummins West Training Center at 510-351-6101. Classes listed in the brochure, but not on the schedule, are available by special Request Only.

Cummins West Training Center

5

Cummins Engines Current Engine Courses Available for 2010: 1. Warranty Qualification (2005-07 Distributor, 2005-08 North American Dealer) A course designed to familiarize the Cummins Warranty Decision Maker with an understanding of proper claim preparation, documentation, SRT, and procedures. Qualification testing is included. Virtual College program must be completed before attending. Mandatory Prerequisites: Warranty Virtual College Bulletin #4091832 1 Day (Refer to schedule for cost)

2. Cummins Electronic Engine Diagnostics. (2006-13Q) Covered in this course will be Basic Electricity Fundamentals and diagnostic tools, Wiring Diagram Familiarization, Electronic Troubleshooting Trees and a common sense approach to Electronic Diagnosis. The student will be required to use the INSITE Diagnostics program. Recommended Prerequisites:

INSITE Diagnostic Service Tool (2006-14Q)

5 Days (Refer to schedule for cost)

3. INSITE Diagnostic Service Tool (2006-14Q) This course is designed to introduce the technician to basic computer operation and software applications related to troubleshooting and programming today' s electronically controlled engines. Technicians will learn to navigate within the Windows operating system and to run Windows based Cummins applications such as INSITE and Intercept. They will learn basic functions such as opening jobs, diagnosing engine problems, programming, and calibrating ECMs. 2 Days (Refer to schedule for cost) 4. 2010 ISX15 CM2250 (2009-37Q) This course will cover in detail the new 2010 ISX15 CM2250. Topics to be covered will be changes to the ISX15 Base Engine such as the engine gear train, the new XP High Pressure Common Rail fuel system for the ISX., Cooled exhaust Gas Recirculation, and CM2250 Control System diagnostics. Also covered will be the addition of the Selective Catalyst Reduction aftertreatment system, new for the 2010 automotive product. Mandatory Prerequisites:

INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics. or equivalent (2006-13Q) Bulletin Number 4091874 - Heavy Duty Virtual College Library 5 Days (Refer to schedule for cost)

5. 2010 ISB, ISC, ISL CM2250 (2009-30Q and 2009-31Q) This course will cover in detail the new 2010 MidRange Product. Topics to be covered will be changes to the ISB, C & L Base Engines., High Pressure Common Rail fuel system, Cooled exhaust Gas Recirculation, and CM2250 Control System diagnostics. Also covered will be the addition of the Selective Catalyst Reduction aftertreatment system, new for the 2010 automotive product. Mandatory Prerequisites:

INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics. or equivalent (2006-13Q) Bulletin Number 4091856 - MidRange Duty Virtual College Library 5 Days (Refer to schedule for cost)

6

6. 2010 ISB, ISC, ISL ISX15 CM2250 Combo (2009-30Q, 2009-31Q, 2009-37Q) This course will cover in detail the new 2010 MidRange and ISX15 2250 Product. Topics to be covered will be changes to the ISB, C , L, and ISX 15 Base Engines., High Pressure Common Rail fuel system, Cooled exhaust Gas Recirculation, and CM2250 Control System diagnostics. Also covered will be the addition of the Selective Catalyst Reduction aftertreatment system, new for the 2010 automotive product. Mandatory Prerequisites:

Bulletin Number 4091856 - MidRange Duty Virtual College Library Bulletin Number 4091874 - Heavy Duty Virtual College Library

5 Days (Refer to schedule for cost) Note: To be eligible for registration the technician must be previously qualified on the 2007 Midrange and 2007 ISX Engines.

7. 2010 ISX 11.9 CM2250 Engine Qualification (2010-06Q) This course will cover in detail the new ISX 11.9 Engine for 2010. Course will include tear down and reassembly of the ISX 11.9 Engine.

Mandatory Prerequisites:

Bulletin Number 4091874 - Heavy Duty Virtual College Library Update for ISX 11.9 CM2250

Note: To be eligible for registration the technician must be previously qualified on the 2010 ISX15 CM2250 Engine.

8. 2007 ISM/ISX Engine Qualification CM 871 & CM 876 (2006-30Q & 2006-31Q) This course is designed to familiarize the technician with the changes made Cummins ISM/ISX engine for 2007. Topics include features and design components. Also included in this course are systems troubleshooting, wiring diagram interpretation, cooled EGR, VGT, exhaust aftertreatment and practical application utilizing Insite. Written and practical application testing involved. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics. or equivalent (2006-13Q) Bulletin Number 4091874 - Heavy Duty Virtual College Library 5 Days (Refer to schedule for cost)

9. 2007 ISB/ISC/ISL CM 2150 Engine Qualification (2006-38Q & 2006-39Q) This course is designed to familiarize the technician with the changes made Cummins ISB/ISC/ISL engine for 2007. Topics include features and design components. Also included in this course are systems troubleshooting, wiring diagram interpretation, cooled EGR, VGT, exhaust aftertreatment and practical application utilizing Insite. Written and practical application testing involved. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics. or equivalent (2006-13Q) Midrange Virtual College Library #4091856 5 Days (Refer to schedule for cost)

10. ISL G Engine Qualification (2007-28Q) This course covers the new 2007 ISL G engine that operates on compressed natural gas (CNG) and liquefied natural gas (LNG). Topics of this course include safety procedures, engine familiarization, scheduled maintenance, and troubleshooting of engine systems and electronic controls. Students need to have a basic knowledge in electronic troubleshooting as well as being familiar with the INSITE diagnostic tool. Additional Training Requirements (Mandatory Prerequisites): In addition to the classroom training, students must complete the Virtual College Library Bulletin #4091845 to be Qualified on this product. We suggest completion of the Virtual College before attending the classroom training. INSITE Diagnostic Service Tool (2006-14Q) 4 Days (Refer to schedule for cost)

7

11. B5.9G, B5.9LPG, C8.3G and L8.9G Plus Qualification (2006-06Q, 2006-07Q, 2006-08Q, 2006-10) This course covers pre-2007 engines that operate on compressed natural gas (CNG) and liquefied natural gas (LNG). Topics of this course include safety procedures, engine familiarization, scheduled maintenance, and troubleshooting of engine systems and electronic controls. Students need to have a basic knowledge in electronic troubleshooting as well as being familiar with the INSITE diagnostic tool. Mandatory Prerequisites: In addition to the classroom training, students must complete the Virtual College Library Bulletin #4091838 to be Qualified on this product. We suggest completion of the Virtual College before attending the classroom training. INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics or equivalent (2006-13Q) 5 Days (Refer to schedule for cost)

2010 Training Schedule for Cummins Engines July - December Program

Start Date

End Date

Class Name

Location

Tuition

2009-30/31/37Q

28-Jun

2-Jul

2010 ISB/C/L/ISX15

San Leandro

1,250.00

2009-30/31/37Q 200606/07/08/10Q

6-Jul

9-Jul

2010 ISB/C/L/ISX15

San Leandro

1,250.00

12-Jul

16-Jul

B/C/LGas Plus

San Leandro

1,250.00

2009-30/31/37Q 2007-28Q

9-Aug 23-Aug

13-Aug 27-Aug

Hawaii San Leandro

1,250.00 1,000.00

2006-13Q 2006-30Q/200631Q 2006-38Q/200639Q

23-Aug

27-Aug

2010 ISB/C/L/ISX15 ISL G Qualification Cummins Electronic Engine Diagnostics

San Leandro

1,250.00

30-Aug

3-Sep

2007 ISM/ISX CM876/871 Engines

San Leandro

1,250.00

30-Aug

3-Sep

2007 ISB/ISC/ISL CM2150 Engines

San Leandro

1,250.00

2009-30 & 31Q 2009-30/31/37Q 2005-07Q

7-Sep 20-Sep 27-Sep

10-Sep 24-Sep 27-Sep

2010 Midrange Only 2010 ISB/C/L/ISX15 Warranty Qualification

San Leandro San Leandro San Leandro

1,000.00 1,250.00 250.00

2009-30/31/37Q 2010 -06Q

4-Oct 25-Oct

8-Oct 29-Oct

2010 ISB/C/L/ISX15 2010 ISX 11.9

San Leandro San Leandro

1,250.00 1,000.00

2010 -06Q 2009-30/31/37Q 2010 -06Q 2009-30/31/37Q 2009-30/31/37Q

1-Nov 2-Nov 15-Nov 22-Nov 29-Nov

4-Nov 5-Nov 18-Nov 24-Nov 3-Dec

2010 ISX 11.9 2010 Midrange Only 2010 ISX 11.9 2010 ISB/C/L/ISX15 2010 ISB/C/L/ISX15

San Leandro San Leandro San Leandro San Leandro San Leandro

1,000.00 1,000.00 1,000.00 1,250.00 1,250.00

2006-13Q 2009-30/31/37Q 2010 -06Q

6-Dec 6-Dec 6-Dec

10-Dec 10-Dec 9-Dec

Cummins Electronic Engine Diagnostics 2010 ISB/C/L/ISX15 ISX 11.9

San Leandro San Leandro Hawaii

1,250.00 1,250.00 1,000.00

8

Cummins Engine Courses Available Upon Request Only: 12. Engine Rebuild Courses (available by Request Only) B Series, C Series, L10/M11 Series, NT/N14 Series, ISX Series/QST30

These courses emphasize correct disassembly, inspection, and reassembly procedures. Hands-on work and classroom instructions are major portions of these courses. Failure analysis, repair order documentation, and reuse guidelines are just some of the main topics. B/ISB Series - 2 Days C/ISC/ISL Series - 3 Days L10/M11 Series - 4 Days NT/N14 Series - 4 Days ISX Series - 4 Days QST 30 – 5 Days

(Available by Request Only)

13. N.O.W. (National Overhaul Warranty) Qualification (2005-01Q) ISX Series Engines This course covers the philosophy of the N.O.W. Program as well as a description and plan concept. Technicians will be instructed on proper disassembly and reassembly procedures using published Cummins parts reuse guidelines and repair practices. The inspected items are covered in detail. 4 Days (Available by Request Only)

14. N.O.W. (National Overhaul Warranty) Qualification (2005-01Q) Midrange Series Engines This course covers the philosophy of the N.O.W. Program as well as a description and plan concept. Technicians will be instructed on proper disassembly and reassembly procedures using published Cummins parts reuse guidelines and repair practices. The inspected items are covered in detail. 3 Days (Available by Request Only)

15. High Horsepower QSK19/23 Engine Qualification (1995-15Q & 2002-63Q) The will receive qualification status through hands-on live engine training and written testing. Topic to be covered are the HPI Fuel System and Electronic Features and Controls. Hands on training will include Major Tune Up procedures and live engine troubleshooting. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) 3 Days (Available by Request Only)

16. ISM CM570 Familiarization and Troubleshooting (2000-54Q) This course is designed to familiarize the technician with the evolution of the ISM Engines. Base engine, as well as engine systems changes are reviewed. Unique service and troubleshooting techniques and procedures are also covered. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics. or equivalent (2006-13Q) 4 Days (Available by Request Only)

17. ISX/Signature CM570 Engine Qualification (2000-56Q) This course is designed to familiarize the technician with all engine systems and subsystems. Emphasis is placed on the fuel system, the electronic subsystem, dual overhead cam assembly, engine timing, front gear train, overhead adjustment, cooling and lubrication systems, and combustion air system. Fuel system troubleshooting techniques are also emphasized. Written and practical application testing involved. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics or equivalent (2006-13Q) 5 Days (Available by Request Only)

18. ISX CM870 Engine Qualification (2002-03Q) This course will also familiarize the technician with the changes made Cummins ISX CM870 engine for 2003. Topics include features and design components. Also included in this course are systems troubleshooting, wiring diagram interpretation, cooled EGR, VGT and practical application utilizing the current version of Insite. Written and practical application testing involved. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) 5 Days (Available by Request Only)

9

19. ISC/ISL Engine Qualification (Pre 2002) (2004-07Q, 2004-08Q) A course designed to familiarize the technician with the Pre - 2002 Cummins MidRange product, the Interact System C, and L. Topics include its features and design components. Also included in this course are ISB/ISC/ISL system troubleshooting, wiring diagram interpretation, DVM usage, and practical application utilizing Insite. Written and practical application testing involved. Also we will cover modular repair to the CAPS fuel injection pump. Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics or equivalent (2006-13Q) ISC/ISL Engine Evolution Virtual College 5 Days (Available by Request Only)

20. ISB CM850Engine Qualification (2002-06Q) This course is designed to familiarize the technician with the changes made Cummins ISB CM850 engine for 2003. Topics include features and design components. Also included in this course are systems troubleshooting, wiring diagram interpretation, cooled EGR, VGT and practical application utilizing Insite 6.x. Written and practical application testing involved. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics or equivalent (2006-13Q) 4 Days (Available by Request Only)

20. ISC/ISLCM850 Engine Qualification (2004-07Q, 2004-08Q) This course is designed to familiarize the technician with the changes made Cummins ISC/ISL CM850 engine for 2003. Topics include features and design components. Also included in this course are systems troubleshooting, wiring diagram interpretation, VGT and practical application utilizing Insite 6.x. Written and practical application testing involved. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics or equivalent (2006-13Q) 4 Days (Available by Request Only)

21. Legacy Gas Engines - B5.9G. B5.9LPG, C8.3G, and L10G III (1995-05Q,1997-02Q, 1997-03Q) With the change in emission regulations the use of alternative fueled engines have become more prevalent. This course covers engines that operate on compressed natural gas (CNG) and liquefied natural gas (LNG). Topics of this course include safety procedures, engine familiarization, scheduled maintenance, and troubleshooting of engine systems and electronic controls. Students need to have a basic knowledge in electronic troubleshooting as well as being familiar with the INSITE diagnostic tool. Mandatory Prerequisites: INSITE Diagnostic Service Tool (2006-14Q) Cummins Electronic Engine Diagnostics or equivalent (2006-13Q) 5 Days (Available by Request Only)

22. Cummins Stationary Natural Gas Engines-Cummins Carbureted Engine Qualification (2003-05) This course is designed to familiarize the technician with all engine systems and subsystems of the Cummins stationary natural gas or propane product. Emphasis is placed on the fuel system, the ignition system, engine commissioning, overhead adjustment, cooling and lubrication systems, and combustion air system. Fuel system and Ignition system troubleshooting techniques are also emphasized. 3 Days (Available by Request Only)

23. Industrial Gas CM558 AFR SLB & LE (2007-31Q) This course covers the new CM558 Industrial Gas engines. Both SLB (simple lean burn) and LE (low emissions using a catalyst) technology is covered. Emphasis is placed on natural gas as a fuel, natural gas analysis, initial engine setup and adjustments, Cummins Gas Analysis web tool, elevation & timing adjustments, exhaust 02 level adjustments, NOx level adjustments, gas pressure, fuel system plumbing and filtration, carburetor adjustment, ignition system, troubleshooting skills, service & maintenance procedures, safety procedures, service tools, exhaust aftertreatment, and information resources. Written and hands-on testing assures competency. Mandatory Prerequisites: QuickServe On Line Service Training Cummins Virtual College (CVC) Courses: BETT and BETT Update CVC Insite & Insite Update CVC Course # 1042 – Engine Clean Care CVC Course # 1039 & 1040 Quick Serve On Line 5 Days (Available by Request Only)

10

24. Industrial Tier III QSK19 MCRS (2005-02Q) This course covers the Tier III QSK19 engine used in Tier III Industrial applications and Tier II Marine applications. The QSK 19 is the Cummins 19 Litre engine with the Modular Common Rail Fuel System and the CM850 Electronic control system. Topics covered in this course will be base engine familiarization, Modular Common Rail fuel system operation and diagnostics, and CM850 control system operation and diagnostics. There will be a written and hands on testing. Additional Training Requirements (Mandatory Prerequisites): Students must complete the Virtual College Library Bulletin #4091843 to be Qualified on this product. Must be qualified on the INSITE Diagnostic Service Tool.. (2006-14Q) 4 Days (Available by Request Only)

Cummins Marine Engine Training 1. QSM11 and 480CE Marine Engine Qualification (2006-49Q & 2006-56Q) The Technician will receive qualification status through hands-on live engine training and written testing on the QSM11 & 480CE engines. The technician will work with INSITE, Data Link Adapters, and Electronic Control Modules. Marine application requirements, sea trial, marine specific components, maintenance, operation and installation requirements will be covered. Emphasis is placed on understanding the Air, Lube, Cooling, Fuel, and Electronic systems as it applies to Marine engines Mandatory Prerequisites: BASIC ELECTRONICS THEORY AND TROUBLESHOOTING (classroom or Virtual College)

INSITE Diagnostic Service Tool (2006-14Q)

CMC/CMD Performance Troubleshooting Course (Virtual College), 3898917 ISM Engine (Virtual College) 3898757 ISM/QSM Electronic Features (Virtual College) 5 Days (Refer to schedule for cost)

2. QSB/QSC/QSL Marine Engine Qualification (2006-48Q) The Technician will receive qualification status through hands-on live engine training and written testing on the 480C-E, QSB, QSC, QSL, and QSM11 engines. The technician will work with INSITE, Data Link Adapters, and Electronic Control Modules. Marine application requirements, sea trial, marine specific components, maintenance, operation and installation requirements will be covered. Emphasis is placed on understanding the Air, Lube, Cooling, Fuel, and Electronic systems as it applies to Marine engines Mandatory Prerequisites: BASIC ELECTRONICS THEORY AND TROUBLESHOOTING (classroom or Virtual College)

CMC/CMD Performance Troubleshooting Course (Virtual College) INSITE Diagnostic Service Tool (2006-14Q)

5 Days (Refer to schedule for cost)

3. Marine QSK19 CM850 MCRS Engine Qualification (2008- 02Q) The Qualified Marine Technician will receive qualification status through hands-on live engine training and written testing. Marine application requirements, sea trial, maintenance, operation and troubleshooting techniques will be taught using a QSK19 MCRS marine engine with C Command Elite and Elite Plus controls. Mandatory Prerequisites: QSK19 CM850 MCRS Industrial Engine Qualification (2005-02Q) 4 Days (Refer to schedule for cost)

4. QSD MerCruiser Diesel Engine Qualification (2007-01Q) The Qualified Marine Technician will receive qualification status through hands-on engine training and written testing on the QSD 2.0, 2.8, 4.2 Engines. Marine application requirements, sea trial, maintenance, operation and troubleshooting techniques will be taught using live engine modules and controls. Mandatory Prerequisites: BASIC ELECTRONICS THEORY AND TROUBLESHOOTING 4 Days (Refer to schedule for cost)

5. Marine Vessel Electronics (7005 & 7007) This course will qualify the student on the SmartCraft 1.0/1.1/2.0/2.1 and 2.2 Vessel Electronics. Mandatory Prerequisites: BASIC ELECTRONICS THEORY AND TROUBLESHOOTING

3 Days (Refer to schedule for cost)

11

Cummins Power Generation RV Generator Required Courses. (2007- 08Q & 2007-10Q) 1. CPG Gas and Diesel RV Qualification

This course covers basic generator set theory, operation, maintenance, troubleshooting and repair. This course focuses on the Microlite gensets. This course also covers the new RV Gensets MicroQuiet, Quiet Diesel, Marquis Gold, and Marquis Platinum Gensets. This class concludes with written and practical application qualification testing. This course meets the qualification requirements for the Consumer Commercial Diesel and Gas GenSets. (200718Q & 2007-16Q) This course meets the qualification requirements for “Portables” (2007-19Q) 3 Days (Refer to schedule for cost)

2. RV Inverter/Charger (Equinox course 122)

This course is designed to introduce technicians to the Equinox inverter/charger. Technicians will learn operation, troubleshooting and repair of the Equinox inverter/charger. This course also contains classroom activities and shop activities to enhance the learning experience. 2 Days (Available by Request Only)

3. Hybrid Quiet Diesel HQD (6018 and 6019)

This course is designed to introduce technicians to the Hybrid Quiet Diesel Power System used in high end motor homes. The technician will learn about this new concept and how to identify a proper installation. This course also includes operation maintenance, and troubleshooting the power unit, inverter, and transfer switch. This course will be classroom and hands on with an operating system. 3 Days (Available by Request Only) Mandatory Prerequisites: RV Diesel course

4. 3.2 Quiet Diesel (6030 and 6031) This course qualifies the technician on the 3.2 Quiet Diesel genset. This course also includes operation maintenance, and troubleshooting, This course will be classroom and hands on with an operating system. 2 Days (Refer to schedule for cost)

PowerGen Industrial Products 1. Fundamentals of Power Generation (CORE Requirements and Course 177)

This course covers the many of the CORE training requirements for all Commercial GenSets Topics include generator and control familiarization, wiring diagram interpretation, basic troubleshooting and testing. In addition to the basic technical training, required safety courses are also covered such as Electrical Hazards (NFPA70E

Overview) Electrical Safety - Introduction to NFPA 70E 600 Volts or Greater Electrical Safety Introduction to NFPA 70E 600 Volts or Less - Lockout/Tagout -Contractor Safety Training and OSHA familiarization. Customer connections, Detector 12 control panel, Sentinal and 3100 Controls are also covered in this course. This course is a requirement for all Commercial GenSet Technicians. 5 Days (Refer to schedule for cost) Prerequisites : Virtual College Courses for Generator CORE Training. Check “CORE” Smart program Guide on QSOL.

2. InPower ( Courses 6029 and 6058)

This course will qualify technicians on the InPower software application as it relates to troubleshooting and programming 3200 and 2100 PowerCommand Controls, and OTPC, OHPC, CHPC transfer switches. Students will learn how to navigate within the Windows-based operating system and to use Windows functions necessary to use InPower diagnostic & programming functions. STUDENTS MUST BRING A LAPTOP COMPUTER and INPower software WITH THEM TO CLASS 2 Days (Refer to schedule for cost) Prerequisites : CORE Requirements

12

3. Automatic Transfer Switches (2000-05Q)

This course concentrates on installation, adjustment, service and troubleshooting of CPG OT III and LT III transfer switches. Through a combination of classroom instruction and practical application training experiences, technicians learn to use electrical diagrams and manuals to troubleshoot and repair CPG transfer switches. Technicians must have a thorough knowledge of AC and DC electrical theory. This class concludes with written and practical application qualification testing. 3 Days (Refer to schedule for cost) Mandatory Prerequisites: CORE Requirements

4. Power Command 1.X Controls (2008-08Q)

The technician will learn the features of the PowerCommand Control 1301/1302. This course also includes a complete sequence of operation of all of the modes in the PowerCommand Control 1301/1302 operating systems, troubleshooting practice and installation procedures for generator sets with the PowerCommand Control 1301/ 1302. Troubleshooting of this control expands the knowledge of InPower Service Tool software brought to the class by the participants. Once the students have successfully completed all of the required exercises, they will participate in a written and hands-on qualification assessment. Mandatory Prerequisites: CORE Requirements

InPower Course (no exceptions)

2 Days (Refer to schedule for cost) 5. Power Command 2.X Controls (2008-13Q) The technician will learn the features of the PowerCommand Control 2300. This course also includes a complete sequence of operation of all of the modes in the PowerCommand Control 2300 operating system, troubleshooting practice and installation procedures for generator sets with the PowerCommand Control 2300. In addition, this class will cover modifications to the PCC 2300 control. Troubleshooting of this control expands the knowledge of InPower Service Tool software brought to the class by the participants. Once the students have successfully completed all of the required exercises, they will participate in a written and hands-on qualification assessment. Mandatory Prerequisites: CORE Requirements

InPower Course (no exceptions)

3 Days (Refer to schedule for cost)

6. Power Command 3.X Controls (2008-18Q)

This course covers PowerCommand Control 3300 installation, operation, adjustment, and troubleshooting. We will also review the menu systems, Voltage Regulator and Governor adjustments of the PowerCommand Control 3300. The technicians will learn where the generator set control hardware is located and the function of each module in the control. Troubleshooting of this control expands the knowledge of InPower Service Tool software brought to the class by the participants., Once the students have successfully completed all of the required exercises they will participate in a written and hands-on qualification assessment. Covers Parralelling Basics STUDENTS MUST BRING A LAPTOP COMPUTER WITH THEM TO CLASS EACH DAY. Mandatory Prerequisites: CORE Requirements

InPower Course (no exceptions)

5 Days (Refer to schedule for cost)

7. Power Command 3200/3201 Controls (2000-19Q)

This course covers PowerCommand Control 3200 &3201 installation, operation, adjustment, and troubleshooting. We will also review the menu systems, Voltage Regulator and Governor adjustments of the PowerCommand Control 3200 & 3201 The technicians will learn where the generator set control hardware is located and the function of each module in the control. Troubleshooting of this control expands the knowledge of InPower Service Tool software brought to the class by the participants., Once the students have successfully completed all of the required exercises they will participate in a written and hands-on qualification assessment. STUDENTS MUST BRING A LAPTOP COMPUTER WITH THEM TO CLASS EACH DAY. Mandatory Prerequisites: CORE Requirements

InPower Course (no exceptions)

3 Days (Refer to schedule for cost)

13

8. Power Command 2100/ 2100 CAN Controls (2001-28Q)

The technician will learn the features of the PowerCommand Control 2100 CAN. This course also includes a complete sequence of operation of all of the modes in the PowerCommand Control 2100 operating systems, troubleshooting practice and installation procedures for generator sets with the PowerCommand Control 2100. In addition, this class will cover modifications to the PCC 2100 control resulting from the addition of the CAN data Link to communicate on engine ECM' s. Troubleshooting of this control expands the knowledge of InPower Service Tool software brought to the class by the participants. Once the students have successfully completed all of the required exercises, they will participate in a written and hands-on qualification assessment. Mandatory Prerequisites: CORE Requirements

InPower Course (no exceptions)

2 Days (Refer to schedule for cost)

9. OTPC Transfer Switch (2000-18Q)

This course concentrates on installation, adjustment, service and troubleshooting of OTPC transfer switch. Through a combination of classroom instruction and practical application training experiences, technicians learn to use electrical diagrams, manuals and the InPower program to troubleshoot and repair the OTPC transfer switch. Technicians must have a thorough knowledge of AC and DC electrical theory. This class concludes with written and practical application qualification testing. STUDENTS MUST BRING A LAPTOP COMPUTER WITH THEM TO CLASS EACH DAY!! Mandatory Prerequisites: Automatic Transfer Switches and InPower Courses (no exceptions) 2 Days (Refer to schedule for cost)

10. Paralleling Load Transfer Equipment (2002-40Q)

This course is designed to provide the student with knowledge on how to Start-up, Maintain and Troubleshoot the Keystone based PLT series load transfer equipment. The covered switches will be the PLTS, PLTH, PLTO, PLTR and the Keystone Based PLTE. (Note that the DMC based PLTE will not be discussed). The course will consist of 2 classroom days with a PLT series switch for visual aid only. Included in this course will be product specific information on gensets utilizing the "Utility Single" option and review both the Digital Paralleling and Utility Paralleling courses Mandatory Prerequisites: CORE Requirements OTPC Transfer Switch and InPower Courses (no exceptions) 2 Days (Refer to schedule for cost)

11. PowerRent GenSets (2002-32Q)

This course is designed to enable field personnel to install, operate, maintain and repair Cummins PowerGeneration prime and standby Power Rent generator sets. The procedures to change voltage, checkout engine and fluid levels, check batteries, and inspect shutdowns and other electromechanical devices will be discussed. The distribution panel, wiring diagrams, breakers, safety, and troubleshooting considerations unique to the Power Rent package will be covered. This course will also include the paralleling of rental gensets. The paralleling connections for each genset will be considered as well as the interface connections between the two or more gensets that are connected in parallel. Additional circuit breakers necessary for paralleling configuration will be discussed. Mandatory Prerequisites: CORE Requirements 3 Days (Refer to schedule for cost)

12. DMC1 - Digital Master Controls (2000-22Q)

This course covers installation, operation and troubleshooting Digital Paralleling Systems. Topics for this course include: Fundamentals of paralleling in Isolated Bus and Infinite Bus applications. Sequence of operation in Automatic, Semi-automatic and Manual paralleling modes. Digital Master Control components, operation, adjustments and troubleshooting. Touch Screen operation of the paralleling system. Utilizing the touchscreen software program. PowerCommand Paralleling Control (3100) calibration and adjustments. Reading and interpreting Modicon ladder diagrams. Interconnection wiring harness checks and troubleshooting. Digital Paralleling System schematic interpretation. Application review before startup of a new system. This class concludes with written and practical application qualification testing. Mandatory Prerequisites: CORE Requirements Previous attendance at Large Commercial Products Course or six years experience with CPG Generator sets. Previous attendance in a Transfer Switch Course or six years experience with CPG Transfer Switches. Previous attendance in a PowerCommand Control (3100) Course (no exceptions). Previous attendance at CPG Systems & Paralleling Course would be an additional help to the participants in this course. 5 Days (Refer to schedule for cost)

14

13. Basic and Intermediate FT 10 Networks (2004-15Q and 2004-17Q)

This course is designed to qualify technicians on the PowerCommand Network hardware and software. This course includes building a network using twisted-pair media. The course will introduce the technicians to the software used in installing and maintaining networks. Participants will also learn to select and install all hardware, to develop a network which can fill the needs of the customer. This will include the use of a sample specification, drawing the installation diagram for the hardware components and completing a binding diagram. Once the participants have successfully completed all of the required exercises they will complete written and hands-on qualification assessments. STUDENTS MUST BRING A LAPTOP COMPUTER WITH Lon Maker Software. Mandatory Prerequisites: CORE Requirements

InPower Courses (no exceptions)

4 Days (Refer to schedule for cost)

14. Advanced FT10 Network (2004-16Q)

This class will cover LonWorks communication principles, LonMaker stencil creation and use, ModLon II device configuration and use, iLon600 configuration and use, and Remote Light-Weight client use. Cummins resource file and plug-in use will also be covered. The iWatch100 product description, use, and configuration will be covered. This class will also cover the use of PowerCommand for Windows when connecting through a serial (null-modem) connection to a PowerCommand genset or transfer switch Control. This is an expanded version of the training included in the FT10 Network class. All current released device firmware, plug-ins, resource files, and stencils will be provided to participants prior to class and should be placed in the correct locations on the PC. The following is required to participate in this class; LonMaker Integration Tool version 3.13.10 and LNS version 3.08.05 installed and operating on the participants PC along with a properly functioning PCC10 PCMCIA interface. Mandatory Prerequisites: CORE Requirements PowerCommand FT10 Networks and InPower Courses (no exceptions) 3 Days (Refer to schedule for cost)

14. OHPC and CHPC Transfer Switches (2001-29Q)

This course is designed to introduce technicians to the new Open Transition and Closed Transition PowerCommand transfer switches and the new transfer switch mechanism. The participants will learn where the transfer switch hardware is located and the function of each module in the control. The control portion of the course will be expanded from the OTPC transfer switch course. The course will include reviewing the procedures for removal, rebuilding and replacement of the OHPC/CHPC mechanism. After successfully completing the transfer switch control portion of the course, participants will continue with removing, rebuilding and replacing the OHPC/CHPC transfer switch mechanism. Once the participants have successfully completed all of the required exercises, they will participate in a written and hands-on qualification assessment. STUDENTS MUST BRING A LAPTOP COMPUTER WITH THEM TO CLASS EACH DAY!! Mandatory Prerequisites: CORE Requirements OTPC Transfer Switch and InPower Courses (no exceptions) 3 Days (Refer to schedule for cost)

15. MCM 3320 Controls (2005-13Q) This course covers installation, operation, and troubleshooting the MCM3320 master control. Topics for this course include power distribution buss topography, power load transfer control, load shed, and load demand configurations. This course will cover the use of the MCM3320 with Power Command Parallel systems. Also discussed will be programming and setup with the HMI211 and InPower. Mandatory Prerequisites: CORE Requirements Large commercial course or six years experience. Transfer Switch course or six years experience with transfer switches. Power Command 3100 or 3200 course, no exceptions Paralleling Load Transfer course or experience 5 Days (Refer to schedule for cost)

16. PCC 3100 Control

The technician will learn the features of the PowerCommand Control 3100. This course also includes a complete sequence of operation of all of the modes in the PowerCommand Control 3100 operating systems, troubleshooting practice and installation procedures for generator sets with the PowerCommand Control 3100. Once the students have successfully completed all of the required exercises, they will participate in a written and hands-on qualification assessment. Mandatory Prerequisites: CORE Requirements 1 Day (Refer to schedule for cost)

15

Marine GenSets 1. PowerGen Marine Gas & Diesel Qualification (2007-14Q)

This course will cover the current Marine products. The materials will cover the MDK (e-QD) family of gensets, the MGK (e-QG) gasoline family, and the briefly touch on the new MDD series (replacement for the Admiral series). Basic mechanical and electronic troubleshooting and schematic reading will be emphasized, along with specific information for each family of gensets. This class concludes with written and practical application qualification testing. 4 Days (Refer to schedule for cost)

Additional PowerGen Courses 1. Comfort Guard Auxiliary Power Unit (2007-21Q)

This course covers the new Comfort Guard APU. Covered in this course are the installation, operation, maintenance, troubleshooting and repair of the Comfort Guard Unit. This class concludes with written and practical application qualification testing. 3 Days (Refer to schedule for cost)

2. RS 12000 Home Standby (2009-23Q)

This course will cover the RS12000 home standby system including the generator, and transfer switch. Students will learn how to install repair and maintain the system. There will be classroom and practical exercises on a running system in our shop. At the end of this course students will take a written and practical assessment. 3 Days (Refer to schedule for cost)

3. OTEC Transfer Switch Qualification 2008-14Q This course will cover description and operation of the OTEC Transfer Switch. Also covered is the operation and troubleshooting of the OTEC Control Panel. There will a hands on and written assessment at the end of the course. Prerequisites: CORE Requirements 2 Days (Refer to schedule for cost) 4. NSPS (2009-43Q) This course covers the New Source Performance Standards (NSPS) as they relate to GenSet performance and emissions. Covered in this course will be a review of Gaseous Fuel Systems including, Gaseous Fuels, Fuel System Layout, Fuel System Components, and Fuel System sizing. Also covered will be proper use of testing equipment and diagnostic procedures. Prerequisites: Core Requirements 2 Days (Refer to schedule for cost) 5, CMSD 20KW (2009-42Q) This is a familiarization of the new CMSD 20kw GenSet. The student will be introduced to the fuel system, engine systems and control system operation. Also covered will be the YD Alternator installation and troubleshooting. There will be a written assessment at the end of the course. Prerequisites: CORE Requirements, InPower Service Tool 1 Day (Refer to schedule for cost) 6. 1500 KW Rental Container Qualification 2009-44Q This course will cover the new 1500kw Rental container Units. Topic include customer connections, operation setup, and paralleling. Fuel system “Clean Care” and proper diagnostics will be discussed. Prerequisites: CORE Requirements, InPower Service Tool 2 Days (Refer to schedule for cost) 7. Commercial Mobile GenSets 2007-16Q/18Q/23Q This course covers repair and diagnostic functions for the Commercial Mobile Generator product line. Covered are the Commercial Mobile Gasoline Generators (HGJ ), Commercial Mobile Diesel Generators (HDK,), the CPG Portables and the Commercial Mobile Hydraulic/ PTO Qualification (HG & YD). 5 Days (Refer to schedule for cost)

16

2010 Cummins Power Generation Training Schedule July - December Program

Start Date

End Date

Class

Location

2001-29Q

28-Jun

2-Jul

OHPC/CHPC

San Leandro

1250

2007-08Q & 200710Q 6031 & 6032 2009-23Q

12-Jul 15-Jul 26-Jul

14-Jul 16-Jul 30-Jul

RV GenSets 3200 Quiet Diesel RS 12000

San Leandro San Leandro San Leandro

750 500 750

2008-08Q & 200813Q

16-Aug

20-Aug

PC 1.X & 2.X Controls

San Leandro

1250

2004-15Q/2004-17Q

13-Sep

17-Sep

Basic and Intermediate FT10 Networks

San Leandro

1250

2008-18Q

27-Sep

1-Oct

PC 3.X Controls

San Leandro

1250

2008-18Q

11-Oct

15-Oct

PC 3.X Controls

Hawaii

1250

2004-16Q

15-Nov

19-Nov

Advanced FT10 Networks

San Leandro

1250

2008-18Q

13-Dec

17-Dec

PC 3.X Controls

San Leandro

1250

Tuition

17

Allison 1000/2000 Maintenance Training This 2 day course is designed to instruct the technician on performing maintenance level service and repairs on Allison 1000 and 2000 series transmissions. Additional topics include general transmission diagnostics and troubleshooting. Upon successful completion of WBT and classroom instruction, attendees receive TCM Reprogramming Certification which can be provided to SPX-Kent Moore for Allison DOC™ Reprogramming activation.

18

Allison 3000/4000 Maintenance Training This 2 day course is designed to instruct the technician on performing maintenance level service and repairs on Allison 3000 and 4000 series transmissions. Additional topics include general transmission diagnostics and troubleshooting. Upon successful completion of WBT and classroom instruction, attendees receive TCM Reprogramming Certification which can be provided to SPX-Kent Moore for Allison DOC™ Reprogramming activation.

19

Allison Transmission Overhaul Training This course is designed to instruct the technician on performing complete overhaul procedures on the Allison 1000/2000 and 3000/4000 series transmissions. Additional topics include specific details on failure analysis and update information. Upon successful completion of the WBT and classroom instruction, attendees receive Allison Transmission Overhaul Factory Certification on the respective product covered in each 2 day session.

20

Allison AT/MT/HT Maintenance Training These 2 day courses are designed to instruct the technician on performing maintenance level service and repairs on Allison AT or MT or HT series transmissions. Additional topics include general transmission diagnostics and troubleshooting.

21

Allison AT/MT/HT Overhaul Training These courses are designed to instruct the technician on performing complete overhaul procedures on the Allison AT or MT or HT series transmissions. Additional topics include specific details on failure analysis and update information. Upon successful completion of the classroom instruction, attendees receive Allison Transmission Overhaul Factory Certification on the respective product covered in each 2 day session.

22

Please contact Cummins West Training Center for Class Schedule Information Allison Product Training. Elizabeth Dias – 510-614-5138 or [email protected].

2010 Allison Transmission Training Schedule Session ID

Start Date

January – June

End Date

Class

Location

Tuition

San Leandro San Leandro

500 500

San Leandro

1000

San Leandro San Leandro

500 500

San Leandro

1000

San Leandro San Leandro

500 500

San Leandro

1000

July TT-12-MA01.0FAC TT-34-MA01.0FAC

19-Jul 21-Jul

20-Jul 22-Jul

1000/2000 Maintenance 3000/4000 Maintenance August

TT-AMHST01.0LEG

16-Aug

20-Aug

Legacy Maintenance September

TT-12-MA01.0FAC TT-34-MA01.0FAC

7-Sep 9-Sep

8-Sep 10-Sep

1000/2000 Maintenance 3000/4000 Maintenance October

TT-AMHST01.0LEG

11-Oct

15-Oct

Legacy Maintenance November

TT-12-MA01.0FAC TT-34-MA01.0FAC

8-Nov 10-Nov

9-Nov 11-Nov

1000/2000 Maintenance 3000/4000 Maintenance December

TT-AMHST01.0LEG

13-Dec

17-Dec

Legacy Maintenance

23

Cleaire Starting January 1st 2010 Cummins West Training Center will provide Cleaire product training for Cummins West Inc customers by request only. For all Certified Dealer Training contact Cleaire Advanced Emission Controls. 1. Cleaire Longview/Lonestar

This course will familiarize the technician with the Longview Exhaust Aftertreatment system operation, maintenance, troubleshooting and repair.

2. Cleaire Horizon/Skyline

This course will familiarize the technician with the Cleaire Horizon Exhaust Aftertreatment system operation, maintenance, troubleshooting and repair.

3. Cleaire Vista/Phoenix

This course will familiarize the technician with the Cleaire Vista/Phoenix Exhaust Aftertreatment system operation, maintenance, troubleshooting and repair.

4. Cleaire All Metal

This course will familiarize the technician with the Cleaire All Metal Exhaust Aftertreatment system operation, maintenance, troubleshooting and repair.

24

Jay Miller -

40 years of experience in the heavy duty engine and generator fields. Mr. Miller has been a technician, assistance maintenance manager, field service engineer, director of training and engineering, service manager, general service manager, operations manger, automotive and diesel instructor, and is currently our Director of Service Engineering and Training. Mr. Miller holds a Vocational Education Teaching Credential in Automotive/Diesel Technology.

Stu Frampton - 39 years of experience in the heavy duty engine field. Mr. Frampton has been a technician, foreman, owned his own repair business, service engineer, and is currently our Training Manager. Eric Mondale -

29 years of experience in the generator field. Mr. Mondale has been an engineering technician, service engineer, service manager, and is currently our distributor service engineer for PowerGeneration.

Ron Pasquetti - 28 years experience in the Heavy Duty Engine and Allison Transmission fields. Mr. Pasquetti has been technician and shop foreman. In addition he has previously held the Customer Support and Dealer Development Manager position for Allison Transmission Products. He is currently our Technical Support Manager and Instructor for Allison West. Jeremie Pitts -

12 years experience in the Heavy Duty / Midrange engine field Mr. Pitts has been a technician, shop foreman and technical trainer in the Heavy Duty Midrange engine field. He has also worked in Customer Support for Ford Motor Company and has held positions as training developer and instructor for Cummins MerCruiser Diesel. Mr. Pitts holds a BS Degree in Automotive Technologies.

--------------------------------------------------------------------------------------------------------------------------------------------------

Student Registration Form

Please complete this form and forward it to the Cummins West Training Center at 1950 Burroughs Ave, San Leandro, CA 94577 or fax to (510) 895-5781 Student’s Name: ______________________________________________________________________ Company: ___________________________________________________________________________ Contact: _____________________________________________________________________________ Address: ____________________________________________________________________________ City: ________________________________________ State: ________________ Zip: ____________ Phone: _________________________________ Fax Number: ________________________________ Course Name: _______________________________________________ Date: __________________ Account Number: _______________________________ PO: _________________________________ Classes begin promptly at 8:00 am daily. We suggest that students wear comfortable clothing suitable for working on engines, generators, or equipment (NO SHORTS OR SANDALS). Payment is due upon the first day of class, if not prepaid. Cancellations made less than five (5) working days prior to the class start date will be subjected to a $100.00 cancellation fee. In addition, students are responsible for making their own hotel reservations. Maps and a hotel list is provided for your convenience.

Refunds will not be granted after class begins

25

San Leandro Hotel Accommodations La Quinta 20777 Hesperian Blvd. Hayward, CA 94541 (510) 732-6300

San Leandro Marina Inn 68 San Leandro Marina San Leandro, CA 94577 (510) 895-1311

Sacramento Hotel Accommodations Extended Stay America 795 Stillwater Road W. Sacramento, CA 95505 (916) 371-1270

Hallmark Inn 110 F Street Davis, CA 93616 (530) 753-3600

Bakersfield Hotel Accommodations Clarion 3540 Rosedale Highway Bakersfield, CA 93308 (661) 326-1111

Courtyard by Marriot 3601 Marriot Drive Bakersfield, CA 93308 (661) 324-6660

Fresno Hotel Accommodations Holiday Inn Express 5046 North Barcus Fresno, CA 93772 (559) 277-5700

Picadilly Inn Shaw 2305 W. Shaw Avenue Fresno, CA 93711 (559) 226-3850

Hawaii Hotel Accommodations Hilton Prince Kuhio 2500 Kuhio Drive Honolulu, HI 96815 (808) 922-0811

Payment for accommodations is the responsibility of the student. To receive the corporate discount, you must Request Only the Cummins West Corporate Rate when making reservations. 26

27

Directions: From 99 South: Exit Shaw Blvd, turn right on Shaw Blvd (east). Turn left on North Blythe Avenue. Turn left on North Gates Avenue. Turn right on West Jacquelyn Avenue. Turn left on North Cornelia Avenue. Cummins West will be on the right. From 99 North: Exit Shaw Blvd, turn right on Shaw Blvd (east). Turn left on North Blythe Avenue. Turn left on North Gates Avenue. Turn right on West Jacquelyn Avenue. Turn left on North Cornelia Avenue. Cummins West will be on the right.

28

Cummins West Inc. Sacramento Customer Service Center 875 Riverside Parkway West Sacramento, CA 95605-1502

To Reno and I5 5

North

(916) 371-0630

N

Reed Avenue

CHP Academy

Riverside Drive

80 Cummins West

Sacramento To Sacramento and

80

Directions:

5I5

South

Bus 80

50

From San Francisco. Follow I 80 towards Reno, Exit at Reed Avenue. Left on Reed Ave. under the freeway past the CHP Training Center to end. Left on Riverside Parkway approximately 1/2 mile Cummins West on the left. From Sacramento, I 5 North: Take Highway 50 West to INtersate 80 East.Exit at Reed Avenue. Left on Reed Ave. under the freeway past the CHP Training Center to end. Left on Riverside Parkway approximately 1/2 mile Cummins West on the left. From I 5 South: Take I 80 west toward San Francisco, Exit Reed Avenue. Left on Reed Avenue past the CHP Training Center to end. Left on Riverside Parkway 1/2 mile to Cummins West on the left.

29

Cummins West - Hawaii 91-230 Kalaeloa Blvd. Kapolei, HI 96707 1 (808) 682-8110

H1

To Kapolei

To Honolulu

Directions From Honolulu: Take H1 and take exit 1 at Kapolei. Go south on Hawaii 95. Hawaii 95 turns into Kalaeloa Blvd. The branch is on the right hand side of the street, 91-230 Kalaeloa Blvd.

Kal a aelo d Blv

Cummins West

N

30

Cummins West, Inc 5125 Caterpillar Road Redding, CA 96003 (530) 224-4070

Directions: From I-5 South: Exit Twin View Road, turn left on Twin View Road, turn right on Caterpillar Road to 5125, Cummins West will be on the left. From I-5 North: Exit Twin View Road, turn right on Twin View Road, turn right on Caterpillar Road to 5125, Cummins West will be on the left.

31

32

Cummins West, Inc.

Serving Northern & Central California’s, and Hawaii’s Power, Equipment, and Emission Needs San Leandro Corporate Headquarters 14775 Wicks Blvd San Leandro, CA 94577 (510) 351-6101 Arcata 5150 Boyd Road Arcata, CA 95521 (707) 822-7390 Bakersfield 4601 East Brundage Ln. Bakersfield, CA 93307 (661) 325-9404 Fresno 5333 N. Cornelia Avenue Fresno, CA 93722 (559) 277-6760 Hawaii 91-230 Kalaeloa Blvd Kapolei, HI 96707 (808) 682-8110 Redding 5125 Caterpillar Road Redding, CA 96003 (530) 224-4070 West Sacramento 875 Riverside Parkway West Sacramento, CA 95691 (916) 371-0630

Hawaii

33

34