200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

July 14, 2018 | Author: Anirban Das | Category: Nuclear Fission, Internal Combustion Engine, Nuclear Reactor, Mechanical Engineering, Chemistry
Share Embed Donate


Short Description

gtawsghrsvd...

Description

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Engineering Interview Questions.com Engineering interview questions,multiple choice questions,objective type questions,seminor topics,lab viva questions and answers ,online quiz test pdf free download for freshers. HOME interview Questions MCQs *LAB VIVA C LASS NOTES SEMINAR TOPICS ONLINE TEST GATE IIT JEE CAT

Home » Mechanical Interview Questions » 200 TOP MECHANICAL Engineering Interview Questions and Answers

Custo powered by

200 TOP MECHANICAL Engineering Interview Questions and Answers Kalasalingam University-B.Tech - Admissions Open for 2017 Posted on March 9, 2017 by engineer

298

Comments Ads by Google

Interview Questions PDF Questions and Answers

MECHANICAL Engineering Interview Questions and Answers :1. What is the difference between scavenging and supercharging ? 2. What are the names given to constant temperature, constant pressure, constant volume, constant internal energy, constant http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

1/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

enthalpy, and constant entropy processes. 3. In a Rankine cycle if maximum steam pressure is increased keeping steam temperature and condenser pressure same, what will happen to dryness fraction of steam after expansion ? 4. Why entropy change for a reversible adiabatic process is zero ? 5. What are two essential conditions of perfect gas ? 6. Enthalpy and entropy are functions of one single parameter. Which is that ? 7. Why rate of condensation is higher on a polished surface compared to rusty surface ? 8. How much resistance is offered to heat flow by drop wise condensation ?

Engineering Questions

9. What is the relationship between COP of heating and cooling

Engineering Quest

?

4,115 likes

10. How much is the work done in isochoric process ? Like Page

11. When maximum discharge is obtained in nozzle ? Be the first of your friends to like this

12. Under what condition the work done in reciprocating compressor will be least ? 13. What is the difference between stalling and surging in rotary compressions ?

14. Why the electric motor of a fan with backward curved blades is never got overloaded under any condition ?

Find us on Google Plus Engineering i Follow

15. Why the work per kg of air flow in axial flow compressor is

560 followers

less compared to centrifugal compressor for same pressure ratio ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

2/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

16. What is the name given to portion of thermal energy to be necessarily rejected to environment ? 17. What is pitting ? How it is caused ? 18. What is caustic embrittlement ? 19. Which impurities form hard scale and which impurities soft scale ? 20. What is the difference between hard water and soft water ? 21. Which two elements in feed water can cause corrosion of tubes and plates in boiler ? ‘ Ans: Acid and oxygen in feed water lead to corrosion. 22. What should be done to prevent a safety valve to stick to its seat ? Ans: Safety valve should be blown off periodically so that no corrosion can take place on valve and valve seat. 23. Why large boilers are water tube type ? Ans: Water tube boilers raise steam fast because of large heat transfer area and positive water circulation. Thus they respond faster to fluctuations in demand. Further single tube failure does not lead to catastrophy. 24. What type of boiler does not need a steam drum ? Ans: Super-critical pressure boiler. 25. Why manholes in vessels are usually elliptical in shape ? Ans: Elliptical shape has minimum area of opening and thus plate is weakened the least. Further it is very convenient to http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

3/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

insert and take out the cover plate from elliptical opening. 26. Low water in boiler drum is unsafe because it may result in overheating of water tubes in furnace. Why it is unsafe to have high water condition in boiler drum ? Ans: High drum level does not allow steam separation to be effective and some water can be carried over with steam which is not desirable for steam turbine. 27. Why boiler is purged everytime before starting firing of fuel ? Ans: Purging ensures that any unburnt fuel in furnace is removed, otherwise it may lead to explosion. 28. What is the principle of mechanical refrigeration ? Axis. A volatile liquid will boil under the proper conditions and in so doing will absorb heat from surrounding objects. 29. Why high latent heat of vaporisation is desirable in a refrigerant ? Ans: A high latent heat of vaporisation of refrigerant results in small amount of refrigerant and thus lesser circulation system of refrigerant for same tonnage. 30. What is the critical temperature of a refrigerant ? Ans: Critical temperature is the maximum temperature of a refrigerantrat which it can be condensed into liquid and beyond this it remains gas irrespective of pressure applied. 31. Maximum combustion temperature in gas turbines is of the order of 1100 to 10°C whereas same is around 00°C in I.C. engine ? Why ?

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

4/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: High temperature in I.C. engine can be tolerated because it lasts for a fraction of second but gas turbines have to face it continuously which metals can’t withstand. 32. Why efficiency of gas turbines is lower compared to I.C. engines ? Ans: In gas turbines, 70% of the output of gas turbine is consumed by compressor. I.C. engines have much lower auxiliary consumption. Further combustion temperature of I.C. engines is much higher compared to gas turbine. 33. What do you understand by timed cylinder lubrication ? Ans: For effective lubrication, lub oil needs to be injected between two piston rings when piston is at bottom of stroke so that piston rides in oi during upward movement. This way lot of lub oil can be saved and used properly. 34. What is IIUCR in relation to petrol engine ? Ans: HUCR is highest useful compression ratio at which the fuel can be used in a specific test engine, under specified operating conditions, without knocking. 35. In some engines glycerine is used in place of water for cooling of engine. Why ? Ans: Glycerine has boiling point of 90°C which increases its heat carrying capacity. Thus weight of coolant gets reduced and smaller riadiator can be used. 36. Why consumption of lubricating oil is more in two-stroke cycle petrol engine than four-stroke cycle petrol engine ? Ans: In two-stroke engine lub oil is mixed with petrol and thus some lub oil is blown out through the exhaust valves by scavenging and charging air. There is no such wastage in four stroke petrol engine. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

5/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

37. As compression ratio increases, thermal n increases. How is thermal n affected by weak and rich mixture strength ? Ans: Thermal n is high for weak mixture and it decreases as mixture strength becomes rich. 38. How engine design needs to be changed to burn lean mixture ? Ans: Engine to burn lean mixture uses high compression ratio and the highly turbulent move¬ment of the charge is produced by the geometry of the combustion chamber. 39. Horse power of I.C. engines can be expressed as RAC rating, SAE rating, or DIN rating. To which countries these standards belong ? Ans: U.K., USA and Germany respectively. 40. What is the use of flash chamber in a vapour compression refrigeration cycle to improve the COP of refrigeration cycle ? Ans: When liquid refrigerant as obtained from condenser is throttled, there are some vapours. These vapours if carried through the evaporator will not contribute to refrigerating effect. Using a flash chamber at some intermediate pressure, the flash vapour at this pressure can be bled off and fed back to the compression process. The throttling process is then carried out in stages. Similarly compression process is also done in two separate compressor stages. 41. Why pistons are usually dished at top ?

Ans: Pistons are usually hollowed at top to (i) provide greater spa’e for combustion, (ii) increase surface for flue gases to act upon, and (iii) better distribution of stresses. 42. What is the function of thermostat in cooling system of an engine ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

6/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Thermostat ensures optimum cooling because excessive cooling decreases the overall efficiency. It allows cooling water to go to radiator beyond a predetermined temperature. 43. What are the causes of failure of boiler tubes ? Ans: Boiler tubes, usually are made from carbon steel and are subject to (a) high rates of heat transfer,( b ). bending stresses due to uneven heating, especially at expanded or welded joints into headers or drums, © external erosion from burners and flue gas, (d) possible corrosion on the boiler side, and (e) occasional manufacturing defects. Failure may occur due to following reasons : (a) High thermal ratings may lead to rapid failure if the internal fluid flow is reduced for any reason. The resultant overheating leads to a failure by creep, characterised by the bulging of the tube with the eventual development of a longitudinal split. (b ) Fatigue cracking due to bending stresses occur. These are associated with change of section and/or weld undercut, where tubes are expanded or welded into headers. © Failure may arise due to overstressing of a reduced section of metal. (d) Sudden failure of the boiler tube due to corrosion arises from embrittlement of the carbon steel due to interaction between atomic hydrogen from the corrosion process and the iron carbide present in the steel. (e) Defects in tube manufacture, although far from being a regular occurrence, can be a cause of serious trouble. Lamination in boiler tubes or score marks arising from the cold drawing of tubes, give rise to premature failure and may promote corrosion at these regions. 44. What are the causes of failure of superheater tubes ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

7/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Superheater tubes are subjected to the most severe combination of stress, temperature and corrosive environment. In addition to high-temperature strength, resistance to corrosion is also important. For example, low-alloy ferritic steel such as -1/% Cr, 1% Mo would not be used at metal temperatures above 580°C because of inadequate resistance to corrosion and oxidation over a full service life of 100,000/150,000 hr. Failures in superheater tubes may arise from : (a) Prior fabrication history (b ) Faulty heat treatment © Consequences of welding (d) Overheating of the tube metal (e) Gas-side corrosion (f) Stress corrosion (austenitic steels). 45. Why supercritical boilers use less amount of steel compared to non-supercritical boilers ? Ans: Supercritical boilers do not head heavy drum for separation of steam from mixture of water and steam. 46. Out of electric heater and heat pump, which is economical in operation ? Ans: Heat pump. 47. Which furnace burns low-ash fusion coal and retains most of the coal ash in the slag? Ans: Cyclone furnace.

48. How the thickness of thermal boundary layer and thickness of hydrodynamic boundary layer related ? Ans: Ratio of their thickness = (Prandtl number)-1/3.

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

8/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

49. What is the effect of friction on flow of steam through a nozzle ? Ans: To decrease both mass flow rate and wetness of steam. 50. Why gas turbine power plant needs efficient compressor ? Ans: Because a large portion of turbine work is eaten away by compressor and its inefficiency will affect net power output and cost of generation. 51. Why rockets using liquid hydrogen have higher specific impulse compared to liquid hydrocarbon ? Ans: Liquid hydrogen has higher burning velocity. 52. Why axial flow compressor is preferred for gas turbines for aeroplanes ? Ans: Because it has low frontal area. 53. What is the effect of inter cooling in gas turbines ? Ans: It decreases thermal efficiency but increases net output. 54. Why iso-octane is chosen as reference fuel for S.I. engines and allotted 100 value for its octane number ? Ans: Iso-octane permits highest compression without causing knocking. 55. Why thermal efficiency of I.C. engines is more than that of gas turbine plant ? Ans: In I.C. engine maximum temperature attained is higher than in gas turbine.

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

9/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

56. Which are the reference fuels for knock rating of S.I. engines ? Ans: n-heptane and ISO-octane. 57. When effect of variations in specific heats is considered then how do maximum temperature and pressure vary compared to air standard cycle ? Ans: Temperature increases and pressure decreases. 58. Quantities like pressure, temperature, density, viscosity, etc. are independent of mass. What are these called ? Ans: Intensive properties. 59. The amount of radiation emitted per scm per sec is called …. ? Ans: Emissive power. 60. In convection heat transfer, if heat flux intensity is doubled then temperature difference between solid surface and fluid will ? Ans: Get doubled. 61. How you can define coal ? Ans: Coal is a naturally occurring hydrocarbon that consists of the fossilised remains of buried plant debris that have undergone progressive physical and chemical alteration, called coalification, in the course of geologic time. 62. Which pollutant is major greenhouse gas and what is its effect ?

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

10/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: CO is major greenhouse gas and it traps the radiation of heat from the sun within earth’s atmosphere. 63. In order to increase efficiency and reduce CO emissions and other emissions, clear coal technologies are receiving major attention. What are these ? Ans: (i) Advanced pulverised and pressurised pulverised fuel combustion. (ii) Atmospheric fluidised bed combustion and pressurised fluidised bed combustion. (iii) Supercritical boilers. (iv) Integrated gasification combined cycle systems. (v) Advanced integrated gasification, including fuel cell systems. (vi) Magneto hydrodynamic electricity generation. 64. What are the important operational performance parameters in design of fuel firing equipment ? Ans: Fuel flexibility, electrical load following capability, reliability, availability, and maintenance ease. 65. What is the differenc between total moisture and inherent moisture in coal ? Ans: The moisture content of the bulk as sampled is referred to as total moisture, and that of the air dried sample is called inherent moisture. 66. Proximity analysis of coal provides data for a first, general assessment of a coal’s quality and type. What elements it reports ? Ans: Moisture, volatile matter, ash and fixed carbon. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

11/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

67. Ultimate analysis of coal is elementary analysis. What it is concerned with ? Ans: Carbon, hydrogen, nitrogen, and sulphur in coal on a weight percentage basis. 68. Explain the difference between AFBC, BFBC, PFBC and PCFB in regard to fluidised bed technologies. Ans: AFBC (Atmospheric fluidised bed combustion) process consists of forming a bed of inert materials like finely sized ash or ash mixed with sand, limestone (for sulphur removal), and solid fuel particles in a combustor and fluidising it by forcing combustion air up through the bed mixture. The gas flows thorugh bed without disturbing particles significantly but gas velocity is high enough to support the total weight of bed (fluidisation). At slightly higher velocity excess gas passes through the bed as bubbles (fluidised bed) and gives the bed the appearance of a boiling liquid. Bubbling fluidised bed combustion (BFBC) has a defined height of bed material and operates at or near atmospheric pressure in the furnace. Pressurised fluidised bed combustion (PFBC) system operates the bed at elevated pressure. Exhaust gases have sufficient energy to power a gas turbine, of course, gases need to be cleaned. In fluidised combustion, as ash is removed some unburned carbon is also removed resulting in lower efficiency. In circulating fluidised bed combustion (CFBC) system, bed is operated at higher pressure leading to high heat transfer, higher combustion efficiency, and better fuel feed. Circulating fluidised beds operate with relatively high gas velocities and fine particle sizes. The maintenance of steady state conditions in a fast fluidised bed requires the continuous recycle of particles removed by the gas stream (circulating bed). The term circulating bed is often used to include fluidised bed sys¬tems http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

12/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

containing multiple conventional bubbling beds between which bed material is exchanged. 69. What for Schmidt plot for is used in heat transfer problems ? Ans: Schmidt plot is a graphical method for determining the temperature at any point in a body at a specified time during the transient heating or cooling period. 70. In which reactor the coolant and moderator are the same ? Ans: Pressurised water reactor. 71. Which reactor has no moderator ? Ans: Fast breeder reactor. 72. What are thermal neutrons ? Ans: Thermal neutrons are slow neutrons (having energy below 1 eV) which are in thermal equilibrium with their surroundings. 73. What is big advantage of fast breeder reactor ? Ans: It has rapid self breeding of fissile fuel during the operation of the reactor, and thus, it offers about sixty times the output with same natural uranium resources through ordinary nonbreeder nuclear reactor. 74. What is the purpose of biological shield in nuclear plants ? Ans: Biological shield of heavy concrete prevents exposure to neutrons, beta rays and gamma rays which kill living things. 75. Which two elements have same percentage in proximate and ultimate analysis of coal? Ans: Moisture and ash. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

13/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

76. On which analysis is based the Dulong’s formula for the heating value of fuel ? Ans: On ultimate analysis. 77. Which element causes difference in higher and lower heating values of fuel ? Ans: Hydrogen. 78. Which heating value is indicated by a calorimeter and why ? Ans: Gross heating value because steam is condensed and heat of vapour formed is recovered. 79. State the difference between ultimate and proximate analysis of coal ? Ans: In ultimate analysis, chemical determination of following elements is made by weight: Fixed and combined carbon, H, O, N, S, water and ash. Heating value is due to C, H and S. In proximate analysis following constituents are mechanically determined by weight. Moisture, volatile matter, fixed carbon and ash. Heating value is due to fixed carbon and volatile matter. 80. What is fuel ratio ? Ans: Fuel ratio is the ratio of its % age of fixed carbon to volatile matter. 81. How the analyses and calorific values of fuels can be reported ? Ans: It may be reported as (a) as received or fired (wet) basis http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

14/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

(b ) dry or moisture free basis © combustible or ash and moisture free basis 82. What is the difference between nuclear fission and fission chain reaction. Ans: The process of splitting of nucleus into two almost equal fragments accompanied by re¬lease of heat is nuclear fission. Self sustained, continuing, sequence of fission reactions in a con¬trolled manner is fission chain reaction. 83. Explain difference between fissile and fertile materials. Ans: The materials which can give nuclear fission e.g. U 35, Pu 39, U 33 are fissile materi¬als. Fertile material itself is not fissionable, but it can be converted to a fissionable material by irradiation of neutrons in a nuclear reactor. 84. What do you understand by fuel cycle in nuclear plants ? Ans: Fuel cycle a series of sequential steps involved in supplying fuel to a nuclear power reactor. The steps include : Mining, refining uranium, fabrication of fuel elements, their use in nuclear reactor, chemical processing to recover remaining fissionable material, re-enrichment of fuel from recovered material, refabrication of new fuel elements, waste storage etc. 85. What is heavy water and what is its use in nuclear plants ? Ans: Water containing heavy isotopes of hydrogen (Deuterium) is known as heavy water. Heavy water is used as a moderator. Heavy water has low cross section for absorption of neutrons than ordinary water. Heavy water slows down the fast neutrons and thus moderates the chain reaction. 86. What is a converter reactor ?

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

15/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: A reactor plant which is designed to produce more fuel than it consumes. The breeding is obtained by converting fertile material to fissile material. 87. Explain nuclear reactor in brief. Ans: A plant which initiates, sustains, controls and maintains nuclear fission chain reaction and provides shielding against radioactive radiation is nuclear reactor. 88. What is the difference between conversion and enrichment ? Ans: The process of converting the non fissile U 38 to fissile U35 is also called “Conversion”. The material like U 38 which can be converted to a fissile material by the neutron flux is called “fertile material”. The conversion is obtained within the nuclear reactor during the chain reaction. Enrichment is the process by which the proportion of fissile uranium isotope (U-35) is increased above 0.7% (srcinal % in natural uranium). The concentration of U-35 in the uranium hexafluoride is increased from the 0.7% in natural uranium to to 4%. This is called enrichment and is accomplished in an enrichment plant. 89. Disposal of radioactive waste materials and spent fuel is a major and important technology. How the waste radioactive material is disposed off ? Ans: Nonusable fission products are radioactive and take short/medium/long time for radioactive decay to reach safe level of radioactivity. Accordingly three methods of disposal are : (a) Zero or low radioactivity material is dispersed or stored without elaborate shielding.

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

16/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

(b ) Medium radioactivity material is stored for short duration of about 5 years to allow decay of radioactivity. © High radioactive material. They are stored in water for several months to permit radioactive decay to an accepetable low level. 90. Which nuclear reactor uses water as a coolant, moderator and reflector ? Ans: Pressurised water reactor. 91. Which reactor produces more fissionable material than it consumes ? Ans: Breeder reactor. 92. Which reactor uses natural uranium as fuel ? Ans: Gas cooled reacator. 93. Which reactor uses heavy water as moderator ? Ans: CANDU. 94. Which reactor requires no moderator ? Ans: Breeder reactor. 95. Which reactor uses primary coolant as fluoride salts of lithium, beryllium, thorium and uranium ? Ans: Molten salt breeder reactor. 96. Why an increase in area is required to produce an increase of velocity in case of supersonic flow ?

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

17/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Increase in area for increase in velocity for supersonic flow is required because the density decreases faster than velocity increases at supersonic speeds and to maintain continuity of mass, area must increase. 97. Under what circumstances would there be an increase in pressure in a diver¬gent nozzle ? Ans: For subsonic flow at inlet section of a diffuser a lower velocity and higher pressure will exist at the exit section. For supersonic isentropic flow at the inlet section a higher velocity and lower pressure will exist at the exit but if a shock wave occurs in the diffuser then a higher pressure will exist at the exit. 98. Why water can’t be used as refrigerant for small refrigerating equipment ? Ans: The refrigerant should be such that vapour volume is low so that pumping work will be low. Water vapour volume is around 4000 times compared to R- for a given mass. 99. Which parameter remains constant in a throttling process ? Ans: Enthalpy. 100. What is the difference between isentropic process and throttlinglprocess ? Ans: In isentropic process, heat transfer takes place and in throttling process, enthalpy before and after the process is same.

MECHANICAL Interview Questions with Answers book: 1. What is the difference between isotropic and anisotropic materials ?

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

18/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: If a material exhibits same mechanical properties regardless of loading direction, it is isotropic, e.g., homogeneous cast materials. Materials lacking this property are anisotropic. 2. What are orthotropic materials ? Ans: It is a special class of anisotropic materials which can be described by giving their prop¬erties in three perpendicular directions e.g. wood; composites. 3. What is view factor ? Ans: View factor is dependent upon geometry of the two surfaces exchanging radiation. 4. What properties need to be considered for applications calling for following re¬quirements : (i) rigidity (ii) strength for no plastic deformation under static load (iii) strength to withstand overload without fracture. (iv) wear resistance (v) reliability and safety. Ans: (i) Rigidity—Elastic modulus and yield strength (ii) Strength (for no plastic deformation under static loading)— yield point

(iii) Strength (overload)—Toughness and impact resistance (iv) Wear resistance—Hardness (v) Reliability and safety—Endurance limit and yield point. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

19/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

5. Explain the effects of alloying chromium and nickel in stainless steel. Ans: Addition of nickel and chromium increases the tensile strength and increase in resistance to corrosion takes place. 6. Mention two types of dislocations. Ans: Dislocation refers to a break in the continuity of the lattice. In edge dislocation, one plane of atoms gets squeezed out. In screw dislocation the lattice atoms move fom their regular ideal positions. 7. What are the principal constituents of brass? Ans: Principal constituents of brass are copper and zinc. 8. What is Curie point ? Ans: Curie point is the temperature at which ferromagnetic materials can no longer be magnetised by outside forces. 9. Specific strength of materials is very high when they are in fibre size but lower when they are in bar form Why ? Ans: Crystal structure has ordered, repeating arrangement of atoms. Fibres are liable to maintain this and thus have high specific strength. As size increases, the condition of ordered and repeating arrangements can’t be guaranteed because of several types of defects and dislocations and thus the specific strength gets lower. 10. What is the percentage of carbon in cast iron ? Ans: 2.5%. 11. Which element is added in steel to increase resistance to corrosion ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

20/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Chromium. 12. Whether individual components in composite materials retain their characteristics or not? Ans: yes. 13. An elastomer is a polymer when its percentage elongation rate is ? Ans: Greater than 100%. 14. If percentage elongation of a material is more than 200%, it is classed as ? Ans: Rubber. 15. Why is it that the maximum value which the residual stress can reach is the elastic limit of the material ? Ans: A stress in excess of elastic limit, with no external force to oppose it, will relieve itself by plastic deformation until it reaches the value of the yield stress. 16. Why fatigue strength decreases as size of a part increases beyond around 10 mm? Ans: Perfection of material conditions is possible at lower sizes and as size increases, it is not possible to attain uniform structure of the material. 17. Distinguish between creep and fatigue.

Ans: Creep is low and progressive deformation of a material with time under a constant stress at high temperature applications. Fatigue is the reduced tendency of material to offer resistance to applied stress under repeated or fluctuating loading condition. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

21/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

18. While normal carburising and nitriding surface treatments increase fatigue strength, excessive treatment may decrease the fatigue strength. Why ? .Ans: Normal carburising/nitriding treatments increase volume due to phase transformation at Surface and introduce residual compressive surface stress and thus increase the fatigue strength. By excessive treatment the high compressive stresses are introduced but these are balanced by high in¬ternal tensile stresses of equal value and the subsurface fatigue cracks may develop in the regions of high tensile stress and lead to early fatigue failure. 19. List at least two factors that promote transition from ductile to brittle fracture. Ans: Manner of loading, and the rate of loading promote transition from ductile to brittle frac¬ture. A machine member may have ductile failure under static loading but may fail in brittle fashion when the load is fluctuating. Similarly a material may evidence ductile failure under tensile loading at ordinary testing speed but if load is applied at a high velocity then failure may be brittle. 20. Which theories of failure are used for (a) ductile materials, and (B) brittle materials ? Ans: For ductile materials, theories of failure used are maximum shear stress theory, and maximum energy of distortion theory; while for brittle materials, theory of maximum principal stress, and maximum strain are used. 21. What does thermal diffusivity of metals signify. Ans: Thermal diffusivity is associated with the speed of propagation of heat into solids during changes in temperature with time.

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

22/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

22. For conduction of heat, the instantaneous rate of heat flow is product of three factors. What are these ? Ans: (i) Area of the section of the heat flow path, perpendicular to the direction of heat flow. (ii) temperature gradient, i.e. change of temperature w.r.t. length of path. (ii) Thermal conductivity of material. 23. How convective heat transfer is effected and on what factors it depends ? Ans: Convective heat transfer is effected between a solid and fluid by a combination of molecular conduction within the fluid in combination with energy transport resulting from the motion of fluid particles. It depends on boundary layer configuration, fluid properties and temperature difference. 24. Which is the common element between brass and bronze ? Ans: Copper. 25. What does following alloy designation indicate FG 250 ? Ans: Grey cast iron with tensile strength of 250 MPa. 26. How is ceramic defined ? Ans: It is a solid formed by combination of metallic and nonmetallic elements.

27. Give one example of metal classified as per structure as BCC, FCC, HCP and CCP. Ans: BCC (body centred cubic) structure—Molybdenum

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

23/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

FCC (face centred cubic) structure—Aluminium HCP (hexagonal closed packed) structure—Zinc CCP (cubic dosed packed) structure-Copper. 28. What is the name of solid solution of carbon in alpha iron and delta iron ? Ans: Ferrite and austenite respectively. 29. Explain the difference between pearlite and cementile ? Ans: Pearlite is eutectoid mixture of ferrite and cementile. Cementite is chemical compound of iron and carbon. 30. Give one example each of the following proportion of materials dimensional, physical, technological and mechanical. Ans: Roughness, enthalpy, toughness, and hardness respectively. 31. For which parts the Wahl factor and Lewis form factor used ? Ans: For springs and gears respectively. 32. How oxygen can be removed from steel during melting? What are fully killed steels ? Ans: Oxygen can be removed by adding elements such as manganese, silicon or aluminium which, because of their high affinity for oxygen, react with it to form non-metallic oxides which rise into the slag. Steels which have had most of their dissolved oxygen removed are called “fully killed steels”. 33. Hydrogen cannot be removed easily from molten steel. What harm hydrogen has on property of steel ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

24/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Execessive hydrogen results in the formation of small fissures often described as hairline cracks or flakes in the steel. Large forgings in alloy steel are particularly sensitive to this phenom¬enon. 34. What is allotrope ? In what forms of cubic pattern, iron exists ? Ans: Some elements exist in more than one crystalline form. Each form is known as “allotrope”. Iron exists in two forms of cubic pattern, namely body centered cubic (bcc) and facecentered cubic (fee). 35. What is the difference between alpha iron, delta iron and gamma iron ? Ans: The bcc form of iron exists between room temperature and 910°C, and between 1400°C and the melting point at 1539°C. The lower temperature form is known as “alpha”-iron and the higher temperature form as “delta”-iron. The face-centered cubic form existing between 910°C and 1400°C is referred to as “gamma-iron”. 36. Metals, in general are of low strength and do not possess required physio-chemical and technological properties for a definite purpose. Alloys are therefore more than metals alone. Discuss the arrangement of atoms and structures of alloys. Ans: Alloys are produced by melting or sintering two ore more metals, or metals and a non-metal, together. Alloys possess typical properties inherent in the metallic state. The chemical elements that make up an alloy are called its components. An alloy can consist of two or more components. The phase and structures of alloys describe the constitution, transformations and properties of metals and alloys. A combination of phases in a state of equilibrium is called a system. A phase is a homogeneous portion of a system having the same composition and the same state of aggregation throughout its volume, and separated from the other portions of the system by interfaces. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

25/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

For instance, a homogeneous pure metal or alloy is a singlephase system. A state in which a liquid alloy (or metal) coexists with its crystals is a two-phase system. Structure refers to the shape, size or the mutual arrangement of the corresponding phases in metals or alloys. The structural components of an alloy are its individual portions, each having a single structure with its characteristic features. 37. What is the difference between isotropic material and homogeneous material ? Ans: In homogeneous material the composition is same throughout and in isotropic material the elastic constants are same in all directions. 38. Explain the difference between the points of inflexion and contraflexure. Ans: At points of inflexion in a loaded beam the bending moment is zero and at points of contraflexure in loaded beam the bending moment changes sign from increasing to decreasing. 39. What is the difference between proof resilience and modulus of resilience ? Ans: Proof resilience is the maximum strain energy that can be stored in a material without permanent deformation. Modulus of resilience is the maximum strain energy stored in a material per unit volume. 40. What is the difference between column and strut ?

Ans: Both column and strut carry compressive load. Column is always vertical but strut as member of structure could carry axial compressive load in any direction. 41. Explain the difference between ferrite, austenite and graphite ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

26/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Ferrite is the solid solution of carbon and other constituents in alpha-iron. It is soft, ductile and relatively weak. Austenite is the solid solution of carbon and other constituents in gamma-iron. It exists in ordinary steels at elevated temperatures, but it is also found at ordinary temperatures in some stainless steels. Graphite has a hexagonal layer lattice. ‘ 42. Explain the terms solid solution, eutectic, eutectoid and peritectic. Ans: Solid Solution. When a homogeneous mixture of two (or more) atomic forms exists in solid state, it is known as solid solution. Eutectic. A mixture of two (or more) phases which solidify simultaneously from the liquid al¬loy is called an eutectic. Alloys in which the components solidify simultaneously at a constant tem¬perature the lowest for the given system, are called eutectic alloys. Eutectoid. Eutectoid alloys are the alloys for which two solid phases which are completely soluble become completely insoluble on cooling before a certain temperature called eutectoid tem¬perature. Peritectic. A peritectic transformation involves a reaction between a solid and liquid that form a different and new solid phase. This three phase transformation occurs at a point called peritectic point.

43. What do you understand by critical points in iron, ironcarbide diagram ? Ans: The temperatures at which the phase changes occur are called critical points (or tem¬peratures). http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

27/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

45. Why PERT is preferred over CPM for evaluation of project ? Ans: PERT is based on the approach of multiple time estimates for each activity. 46. What is the percentage of chromium in 18 : 4 : 1 IISS ? Ans: 4%. 47. What is stellite ? Ans: It is a non-ferrous cast alloy containing cobalt, chromium and tungsten. 48. Which rays are produced by cobalt-60 in industrial radiography ? Ans: Gamma rays. 49. What are killed steels and what for these are used ? Ans: Killed steels are deoxidised in the ladle with silicon and aluminium. On solidification no gas evolution occurs in these steels because they are free from oxygen. 50. What is critical temperature in metals ? Ans: It is the temperature at which the phase change occurs in metals.

MECHANICAL Engineering In terview Questions and Answers pdf for freshers :51. Car tyres are usually made of ? Ans: Styrene-butadine rubber. 52. What is the structure of pure iron and whether it is soft or hard ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

28/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Ferrite and it is soft. 53. Which elements increase the corrosion resistance of steel ? Ans: Chromium and nickel. 54. What causes hardness in steel ? How heat treatment alters properties of steel ? Ans: The shape and distribution of the carbides in the iron determines the hardness of the steel. Carbides can be dissolved in austenite is the basis of the heat treatment of steel. If steel is heated above the A critical temperature to dissolve all the carbides, and then cooled, suitable cooling through the cooling range will produce the desired size and distribution of carbides in the ferrite, imparting different properties. 55. Explain the formation of microstructures of pearlite, bainite and martensite in steel. Ans: If austenite containing about 0.80 percent carbon is slowly cooled through the critical temperature, ferrite and cementite are rejected simultaneously, forming alternate plates or lamellae. This microstructure is called pearlite. At temperatures just belot the A1, the transformation from austenite.to pearlite may take an appreciable time to initiate and complete, but the product will be lameller pearlite. As the transformation temperature is lowered, the time to initiate transformation shortens but the product is pearlite of increasing fineness, and at temperatures approaching 550°C it cannot be resolved into its lamellar constituents. Further deerease in transformation temperature causes a lengthening of the ncubation period and a change in structure of the product to a form known as “bainite”. If the temperature is lowered sufficiently, the diffusion controlled nucleation and growth modes of transformation are suppressed completely and the austenite transforms by a diffusionless process in which the crystal lattice effectively shears to a new crystallographic configuration known as http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

29/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

“martensite”. This phase has a tetragonal crystal structure and contains carbon in supersaturated solid solution. 56. How with alloying of steel it is possible to a achieve properties which can not be achieved with heat treatment ? Ans: A prerequisite to the hardening of steels is that martensite should be formed on cooling, but this can only be achieved if the rate of cooling is great enough to suppress the formation of pearlite or bainite and in plain carbon steels this can be achieved by quenching relatively small specimens 57. What are the major effects of alloying elements? Ans: (1) To alter the transformation temperatures and times (2) To modify the room temperature and elevated temperature strengths of given structures by (a) stiffening the crystals and (B) introducing complex precipitates which tend to harden the steel. (3) To modify the type of oxide film formed on the surface of the steel and thereby affect its corrosion resistance. 58. What is the difference between austenite stabilisers and ferrite stabilisers ? Ans: Austenite stabilisers have the effect of extending the temperature range overwhich austenite is formed. Such elements are carbon, manganese, nickel, copper and cobalt. Ferrite stabilisers have the effect of extending the temperature range over which alpha and delta ferrite are formed, which consequently reduces temperature range over which austenite is formed. Such elements are silicon, chromium, molybdenum, tungsten, titanium and niobium. 59. What are the effects of carbon on the properties of steel. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

30/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: In general, an increase in carbon content produces higher ultimate strength and hardness but lowers ductility and toughness of steel alloys. Carbon also increases air-hardening tendencies and weld hardness, especially in the presence of chromium. In low-alloy steel for high-temperature applications, the carbon content is usually restricted to a maximum of about 0.15% in order to assure optimum ductility for welding, expanding, and bending operations. To minimize intergranular corro¬sion caused by carbide precipitation, the carbon content of austenitic (18-8 type) alloys is limited in commercial specifications to a maximum of 0.08%, or even less, i.e. 0.03% in the extremely low-carbon grades used in certain corrosionresistant applications. In plain carbon steels in the normalised condition, the resistance to creep at temperatures below 440°C appears to increase with carbon content up to 0.4% carbon, at higher temperatures there is but little variation of creep properties with carbon content. An increase in carbon content lessens the thermal and electrical conductivities of steel and increases its hardness on quenching. 60. What is the role of silicon as alloying element in steels ? Ans: Silicon contributes greatly to the production of sound steel because of its deoxidizing and degasifying properties. When added in amounts up to 2.5%, the ultimate strength of the steel is increased without loss in ductility. Silicon in excess of 2.5% causes brittleness, and amounts higher than 5% make the steel non-malleable.

Resistance to oxidation and surface stability of steel are increased by the addition of silicon. These desirable effects partially compensate for the tendency of silicon to lower the creep properties of steel. Silicon increases the electrical resistivity of steel and decreases hysteresis losses. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

31/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

61. Discuss the role of manganese in alloying steels. Ans: Manganese is an excellent deoxidizer and sulfur neutralizer, and improves the mechanical properties of steel, notably the ratio of yield strength to tensile strength at normal temperatures. As an alloying element, manganese serves as an inexpensive means of preventing “hot shortness”. It improves rolling properties, hardenability, and resistance to wear. However manganese increases the crack sensitivity of weldments, particularly with steels of higher carbon content. 62. Define buckling factor. Ans: It is the ratio of the equivalent length of column to the minimum radius of gyration. 63. What do you understand by catenary cable ? Ans: A cable attached to the supports and carrying its own weight. 64. What is coaxing ? Ans: It is the process of improving fatigue properties by first under-stressing and then increasing the stress in small increments. 65. What is difference between conjugate beam and continuous beam ? Ans: A conjugate beam is an imaginary beam of same size as srcinal beam and carrying a distributed load in accordance with the bending moment diagram. A continuous beam is one which is resting on more than two supports. 66. What is isotropic material ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

32/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: It is a material having same elastic constants in all directions. 67. Explain difference between modulus of resilience and modulus of rigidity ? Ans: Modulus of resilience is the maximum strain energy stored in a material per unit volume and modulus of rigidity is the ratio of shearing stress to the shearing strain within the elastic limit. 68. What is the difference between basic hole and basic shaft ? Ans: A basic hole is one whose lower deviation is zero and in case of basic shaft the upper deviation is zero. 69. What for pyranometer is used ? Ans: It is used to measure the total hemispherical solar radiation. 70. Describe transfer machines in brief. Ans: It is an automatic machine in which workpiece alongwith fixture is transferred from one station to other automatically and several operation on workpiece are performed at each station. 71. What is burnt-out point ? Ans: It corresponds to maximum heat flux at which transition occurs from nucleate boiling to film boiling. 72. What do you understand by eutectic ? Ans: It is mechanical mixture of two or more phases which solidify simultaneously from the liquid alloy. 72. Explain the difference between grey iron and white iron. What is mottled iron ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

33/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: The carbon in cast iron could exist at room temperature as either iron carbide, or as graphite which is the more stable form. Irons containing carbon as graphite are soft, easily machinable and are called “grey irons”. Irons with carbon present as iron carbide are extremely hard, difficult to machine and are called “white” irons. Irons with fairly equal proportions of graphite and iron carbide have intermediate hardness and are called “mottled” irons. 73. The graphite in grey irons exists in the form of flakes which act as stress-raisers under tensile loading and consequently grey irons have relatively low tensile strength and ductility. Still grey iron is extensively used in engineering. Why ? Ans: Grey iron is extensively used in engineering because of following characteristics. (a) Cheapness. (B) Low melting point and high fluidity making it suitable for castings of intricate shape. © Relatively good erosion and corrosion resistance. (d) High damping capacity, with respect to vibration. (e) Relatively good mechanical properties under compressive loading. 74. Under what condition a convergent divergent nozzle required ? Ans: When pressure ratio is greater than critical pressure ratio. 75. What is endurance limit and what is its value for steel ? Ans: Endurance limit is the maximum level of fluctuating stress which can be tolerated indefinitely. In most steels this stress is approximately 50% of the ultimate tensile strength and it is http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

34/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

defined as the stress which can be endured for ten million reversals of stress. 76. How the net work to drive a compressor and its volumetric efficiency behave with increase in clearance volume ? Ans: Work remains unaltered and volumetric efficiency decreases. 77. What do you understand by sulphur print ? Ans: Sulphides, when attached with dilute acid, evolve hydrogen sulphide gas which stains bromide paper and therefore can be readily detected in ordinary steels and cast irons. While sulphur is not always as harmful as is sometimes supposed, a sulphur print is a ready guide to the distribution of segregated impurities in general. 78. What is the different between brass and bronze ? Ans: Brass is an alloy of copper with zinc; and bronze is alloy of copper with tin. 79. What is the effect of addition of zinc in copper? What is the use of 70/30 brass ? Ans: By addition of zinc in copper, both tensile strength and elongation increases. The 70/30 brass has excellent deep drawing property and is used for making radiator fins. 80, What for admirality brass used ? Ans: Admirality brass with 29% zinc and 1% tin has good corrosion resistance and is used for condenser and feed heater tubes. Aluminium is also added to brass to improve corrosion resistance. 81. What is the maximum use of magnesium ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

35/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ans: Magnesium is used to alloy with aluminium and as an additive for making SG (Spheroidal Graphite) iron. 82. What for zinc finds applications ? Ans: Galvanizing consumes the largest proportion of zinc. Zinc is resistant to corrosion but is attacked by acids and alkalies. Zinc alloy.s are suited for making die casting since the melting point is reasonably low. 83. Which factors influence the type of fracture in failure of a material ? Ans: Seven factors influencing type of failure are : (i) Type of material (inherent structure properties), (ii) Manner of loading (Static versus dynamic), (iii) Range of imposed stress, (iv) Strain rate (static, dynamic, impact), (v) Stress distribution (discontinuity in material/shape), (vi) temperature, and (vii) surface treatment. 84. What is the name given to ratio of actual cycle efficiency and ideal cycle efficiency. Ans: Efficiency ratio. 85. List two effects of manganese in plain carbon steels. , Ans: Manganese increases tensile strength and hardness. It decreases weldability. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

36/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

86. Name the strongest and weakest type of atomic bonds. Ans: Metallic bond is strongest and molecular bond also known as Vander Waals bond is weakest. 87. In which process internal energy remains constant ? Ans: Isothermal process. 88. What is temper embrittlement in alloy steels and what are its effects ? Ans: Embrittlement attack is usually intergranular in metals, i.e. cracks progress between the grains of the polycrystalline material. It imparts a tendency to fail under a static load after a given period of time in those alloy steels which are susceptible to embrittlement. 89. What are whiskers ? Ans: Whiskers are very small crystals which are virtually free from imperfections and dislocations. 90. What is Bauschinger effect ? Ans: According to Bauschinger, the limit of proportionality of material does not remain constant but varies according to the direction of stress under cyclic stresses. 91. What is the difference between heat capacity and specific heat of a material ? Ans: The heat capacity of a material is the amount of heat transformed to raise unit mass of a material 1 degree in temperature. The specific heat of a material is the ratio of the amount of heat transferred to raise unit mass of a material 1 degree in http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

37/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

temperature to that required to raise unit mass of water 1 degree of temperature at some specified temperature. For most engineering purposes, heat capacities may be assumed numerically equal to;specific heats. 92. Explain the rule to find specific heat of aqueous solutions. Ans: For aqueous solutions of salts, the specific heat can be estimated by assuming the specific heat of the solution equal to that of the water alone. Thus, for a 15% by weight solution of sodium chloride in water, the specific heat would be approximately 0.85. 93. What do you understand by latent heat ? Give four examples of latent heats. Ans: For pure substances, the heat effects accompanying changes in state at constant pressure (no temperature change being evident) are known as latent heats. Examples of latent heats are : heat of fusion, vaporisation, sublimation, and change in crystal form. 94. Define the terms free energy and free enthalpy. What is their significance and importance ? Ans: Free energy (or Helmholtz function) is defined as/= u -Ts. It is equal to the work during a constant-volume isothermal reversible nonflow process. Free enthalpy (or Gibbs function) is defined as g = h – Ts

(where u = internal energy, h = enthalpy, T = temperature, s = entropy) Gibbs function is of particular importance in processes where chemical changes occur. For reversible isothermal steady-flow http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

38/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

processes or for reversible constant-pressure isothermal nonflow processes, change in free energy is equal to net work. 95.Which parameter remains constant in isochoric process ? Ans: Volume. 96. What is polytropic process ? Under what conditions it approaches isobaric, isothermal, and isometric process ? In which reversible process no work is done ? Ans: A polytropic process is one that follows the equation pun = constant (index n may have values from – oc to + oo. This process approaches isobaric when n = 0, isothermal when n = 1, and isometric when n = . No work is done in isometric process. 97. Whether superheated steam can be treated like ideal gas ? Ans: Yes. 98. Out of constant pressure and constant volume lines on TS diagram which line has higher slope ? And whether slope is constant or variable ? Ans: Constant volume line. Slope is variable. 99. Whether entropy is intensive property or extensive property ? Ans: Entropy is extensive property. 100. In which process fluid expands but does no work ? Ans: Throttling process.

MECHANICAL Engineering In terview Questions :-

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

39/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Posted in Mechanical Interview Questions Tagged 200 TOP MECHANICAL Engineering Interview Questions and Answers pdf free download

400 TOP MOST EEE VIVA Interview Questions and Answers



298 THOUGHTS ON “200 TOP MECHANICAL

ENGINEERING INTERVIEW QUESTIONS AND ANSWERS” nikesh pandey FEBRUARY 14, 2017 AT 2:48 PM

sir please send me all the related question and answer which has been useful for job interview….thanks Email:- [email protected] REPLY

Ritesh JANUARY 28, 2017 AT 3:32 PM

sir i want interview question(200) and answer pdf for mechanical will you send me on my email. REPLY

Bhabani Sankar Bhuyan JANUARY 17, 2017 AT 6:01 AM

Hi sir, thanks a ton please kindly send me the question relating to tata steel and tata motor. REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

40/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Vikas JANUARY 16, 2017 AT 4:01 PM

Pls…Send me all these interview questions….Very helpful…. REPLY

deepesh kumar chandora JANUARY 12, 2017 AT 8:37 AM

PlZ send me these questions REPLY

Emy JANUARY 6, 2017 AT 10:15 PM

Hello Can you please email me these questions and answers?

[email protected] REPLY

pramod JANUARY 2, 2017 AT 5:39 PM

Sir please send me this entire 200 questions answers and answers PDFs,also including mcqs part also…. Old..sir it’s a kind request. REPLY

R.Sanjeevi http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

41/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

DECEMBER 26, 2016 AT 12:01 PM

Good Evening Sir, These are very useful for me,, thank you sir and One Request sir, please PDF files send to me

[email protected]…this is my mail address REPLY

harsh gadhavi DECEMBER 17, 2016 AT 10:51 AM

sir pls send me to pump and boiler question to my i”d pls sir

[email protected] REPLY

arul DECEMBER 14, 2016 AT 2:07 PM

sir this is very usefull could please send to my email [email protected] REPLY

Jaru Dipak DECEMBER 10, 2016 AT 6:43 PM

Respected Sir, Please send to me all the questions and their answer in my mail address… REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

42/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Thambidurai DECEMBER 6, 2016 AT 4:44 PM

I want these questions please send pdf to my mail REPLY

Jagannath DECEMBER 5, 2016 AT 4:55 PM

Sir Please send me the above questions with answers PDF to my gmail REPLY

Nabin kumar Tandi DECEMBER 5, 2016 AT 2:39 PM

plz sir send me this questions and answers in pdf file my email adress

[email protected] REPLY

Nabin kumar Tandi DECEMBER 5, 2016 AT 2:35 PM

hello sir, I want all this questions with answers in pdf file plz sir send me in my email adress REPLY

T. Geeta NOVEMBER 9, 2016 AT 12:12 PM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

43/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Excellent question bank. Kindly share with my e mail id in pdf. REPLY

manikanta NOVEMBER 5, 2016 AT 4:00 PM

plz send me the pdf of mechanical interview questions with answers REPLY

nandeesh NOVEMBER 2, 2016 AT 5:06 PM

Thank u sir……..this is very useful to us.i want aslo which typeof questions asked in pharma companies&cars manufacturing companies pls send me [email protected]@gmail.com….. REPLY

Frank ovie NOVEMBER 2, 2016 AT 9:23 AM

Thanks for all this, please can u send the question to my mail in PDF. [email protected] Thanks for your support. REPLY

chaitu OCTOBER 20, 2016 AT 4:21 PM

Will you send PDF to my mail-id.? REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

44/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

bharath OCTOBER 19, 2016 AT 10:29 AM

please send me the pdf formate my mail [email protected] REPLY

akshay OCTOBER 16, 2016 AT 2:53 PM

sir plz send all the mechanical question above to my mail REPLY

Deshmukh Siddheshwar Abasaheb OCTOBER 13, 2016 AT 3:54 AM

Sir send above questions ando answer my mail [email protected] REPLY

ROHIT OCTOBER 12, 2016 AT 9:50 AM

sir. please send this in PDF file to my email I’d. i want more related mechanical engg. REPLY

shahzad ali OCTOBER 6, 2016 AT 11:08 AM

sir plzzz send this mechanical question plzzz plzz plzzz on my [email protected] REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

45/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

SURESH SEPTEMBER 28, 2016 AT 4:33 PM

Please sir give all questions to my mail id pls sir I want PDF my mail id [email protected] pls sir…. REPLY

prashant naik SEPTEMBER 28, 2016 AT 9:08 AM

That was very helpful.. please send a PDF of these questions to my email [email protected] REPLY

Abrar SEPTEMBER 27, 2016 AT 10:01 AM

Thanks for the compilation please can you send me the Q&A at [email protected] REPLY

raj gaurav SEPTEMBER 23, 2016 AT 5:17 PM

plz send a pdf format of this question on my mail [email protected] REPLY

sharanu SEPTEMBER 21, 2016 AT 6:12 PM

Can u send all these questions & answers REPLY http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

46/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

sharanu SEPTEMBER 21, 2016 AT 6:11 PM

Can u send me all these questions in PDF REPLY

Gobind Singh SEPTEMBER 18, 2016 AT 7:31 PM

Dear Sir, Can u please send me pdf file. Mechanical engineering interview point of all question and answer pdf file send me my mail id sir. My mail id – [email protected] REPLY

Rajas SEPTEMBER 16, 2016 AT 4:10 PM

plz sir i want all this que and ans plz send me to my email id my email id is [email protected] REPLY

Naseem Khan SEPTEMBER 16, 2016 AT 1:10 PM

Plz send me all questions answers to My email ID. REPLY

S.SARAVANAN SEPTEMBER 16, 2016 AT 4:23 AM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

47/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Please send pdf questions and answers of mechanical engineering to me sir. REPLY

surya Kumar SEPTEMBER 15, 2016 AT 10:48 AM

Plz ,send this questions to my mail REPLY

NARESH KUMAR JENA SEPTEMBER 8, 2016 AT 6:17 AM

Sir i want mechanical interview question and answers REPLY

akshay mashere SEPTEMBER 7, 2016 AT 8:17 AM

sir, plz send me all types of mechanical engineering interview questions {for ex.Technical,Nontechnical,and HR interview question} [email protected] REPLY

mrinmoy banerjee SEPTEMBER 6, 2016 AT 2:44 AM

please send all the questions and answers to my mail….as soon as possible REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

48/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Wilbert SEPTEMBER 4, 2016 AT 12:02 AM

Dear Sir: Can you please email the Mechanical Engineering question and answer pdf Thank you in advance REPLY

V.NAVEEN SEPTEMBER 3, 2016 AT 7:15 PM

please send me the Q&A REPLY

jibanjyoti das SEPTEMBER 3, 2016 AT 12:14 PM

Plz sir give this question on mail [email protected] i need this questions. REPLY

Ethiraj SEPTEMBER 2, 2016 AT 2:02 PM

Study material is very useful for my life.. So sir could you send me above question and answer to my mail.. [email protected] Com REPLY

sheick

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

49/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

SEPTEMBER 1, 2016 AT 10:06 AM

Please send this questions in pdf to my email id it will helpful for me plz sir REPLY

kuldeep kumar AUGUST 31, 2016 AT 9:10 PM

my self kuldeep kumar. i am mechanical engineer (fresher) sir pls send me question and answer. gmail id [email protected] thank you sir REPLY

Razu Ahmmed AUGUST 29, 2016 AT 10:47 AM

Dear Sir, I want this 200 Mechanical Engineer Question and ans please send me please my E-mail Add is ….. REPLY

rajesh AUGUST 27, 2016 AT 1:28 PM

Please pdf REPLY

Nitish roy AUGUST 27, 2016 AT 8:42 AM

plz send me pdf sir my email [email protected] REPLY http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

50/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

gopi AUGUST 26, 2016 AT 10:51 AM

plse send pdf of this questions…. mail id:[email protected] REPLY

anmoldeep AUGUST 25, 2016 AT 10:25 AM

Sir plzz sent me 200 ques in pdf formet REPLY

sheick AUGUST 24, 2016 AT 5:09 PM

Please send me this question in pdf to [email protected] REPLY

Zeeshan AUGUST 24, 2016 AT 2:16 AM

Sir i want all those questions in pdf can u please sent me pls sir REPLY

Kunti kumari AUGUST 22, 2016 AT 5:33 PM

hello sir. Final year mechanical engineering student from delhi technological university.could you please send me the interview questions and ans pdf of mechanical engineering .

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

51/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

Abhishek AUGUST 21, 2016 AT 11:18 AM

Can you please send me the pdf REPLY

ARUN AUGUST 18, 2016 AT 4:36 PM

SIR I NEED THESE QUESTIONS IN PDF FORMAT CAN I HAVE THOSE REPLY

Thandavamoorthy AUGUST 18, 2016 AT 7:58 AM

Sir can u please send me pdf file. Mechanical engineering interview point of all question and answer pdf file send me my mail id sir. My mail id [email protected] REPLY

SUJITH S AUGUST 17, 2016 AT 10:47 AM

CAN YOU PLS SEND THIS QUESTION AND ANSWER TO MY MAIL ID REPLY

Purav rana AUGUST 16, 2016 AT 7:42 AM

Hello..sir I want this que. &ans for my interview preparation. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

52/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Plz send to my mail. REPLY

Rakesh AUGUST 15, 2016 AT 9:13 PM

Respected sir i want question ans. automobile industry in pdf file so plz send on my email id

[email protected] Thanks &Regards Rakesh kumar REPLY

sandeepkumar dass AUGUST 15, 2016 AT 1:47 AM

Sir i want this questions and answers plz send to my mail. REPLY

Abubakar AUGUST 14, 2016 AT 8:47 AM

Dear Sir ! I want to get these question answer in pdf format ? will u send it to me please? REPLY

asif sayed AUGUST 14, 2016 AT 6:15 AM

Sir I need these questions in pdf file.. will you please send me on my mail I’d? ? http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

53/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

[email protected] REPLY

kauser AUGUST 11, 2016 AT 7:07 PM

very usefull please send me sir on my email id these 200 mech eng question and pdf on( [email protected]) REPLY

jaya Murugan AUGUST 11, 2016 AT 4:04 PM

pls send the PDF and all other basic questions in mechanical engineering REPLY

md ashafque ali AUGUST 11, 2016 AT 12:58 AM

I hardly need the pdf of these 200 questions.so main on this sid plzzzz. [email protected] REPLY

sunny kumar AUGUST 10, 2016 AT 6:42 PM

Sir please send me these questions and its answers in pdf to my email [email protected] REPLY

emily n http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

54/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

AUGUST 10, 2016 AT 6:29 AM

PLEASE I NEED THOSE QUESTIONS, PLEASE SEND THEM AS a pdf REPLY

rakesh AUGUST 8, 2016 AT 8:17 AM

Sir please send me these questions and its answers in pdf to my email [email protected] REPLY

Bikramjit Paul AUGUST 7, 2016 AT 3:34 PM

Can you send me the questions and answers in a pdf format please? REPLY

Danish AUGUST 4, 2016 AT 8:00 AM

Please send all the interview questions in pdf sir in email id REPLY

PATIL RAJESH AUGUST 4, 2016 AT 6:47 AM

plz send me this 200 types interview question and ans on my email …….. REPLY

chandan Gupta http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

55/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

AUGUST 2, 2016 AT 4:27 AM

sir I want thermal engineering viva question & answer in pdf file. plg send on my email REPLY

Mohammed AUGUST 10, 2016 AT 7:03 PM

i’m a Mechanical Engineer Thermal engineering could we exchange info about our majors my Email address is [email protected] Thanks Mohammed REPLY

Rahul K R AUGUST 1, 2016 AT 4:26 PM

sir plz send all these question and answer to my mail……. and also another questions n there answers which you have. ? [email protected] REPLY

prashant langute AUGUST 1, 2016 AT 9:44 AM

Respected sir. I want to this que in pdf format? Will u send me a mai.. [email protected] REPLY http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

56/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

amar JULY 30, 2016 AT 3:12 PM

please send me this questions and answersto my mail REPLY

sarver khan JULY 30, 2016 AT 1:31 PM

Dear sir plz send me this questn answer in PDF…I will thankful REPLY

anoop JULY 30, 2016 AT 7:55 AM

plz mail me these qns in pdf format REPLY

rahul JULY 30, 2016 AT 6:09 AM

can u please send me a pdf of these questions. thank you REPLY

tarun mishra JULY 30, 2016 AT 4:17 AM

Sir i want to 200 question pdf farmet . Will you send my mail plz sir REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

57/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

sandeep JULY 29, 2016 AT 5:17 AM

sir plz send me these pdf to my mail REPLY

Laljith K S JULY 28, 2016 AT 4:25 PM

Sir, I want these questions and answers. Can u mail it?? (machanical engineering) REPLY

Laljith K S JULY 28, 2016 AT 4:23 PM

Sir, I want these questions and answers. Can u mail it?? REPLY

saravanan JULY 24, 2016 AT 10:55 AM

Thank you sir…will you plz send this data’s to my mail I’d sir REPLY

Krunal JULY 22, 2016 AT 1:29 PM

[email protected] please mail me all que. ans sir. i am thankful to you http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

58/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

Krunal JULY 22, 2016 AT 1:28 PM

pls send me also sir , thank you REPLY

Raj Patel JULY 22, 2016 AT 1:26 PM

plz sir, mail me all questions with answers and plz send extra important questions also. thank you sir REPLY

Mandeep JULY 22, 2016 AT 1:53 AM

Hello Sir, I want all of these Questions & Answer . So, please send on my mail as PDF document. I hope you send me. Thank You. REPLY

krishna shukla JULY 20, 2016 AT 10:19 AM

hello sir please send it to me in my email so i can improve more my knowledge. REPLY

Dev JULY 20, 2016 AT 7:56 AM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

59/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Sir i want this question & answer in pdf format REPLY

Kunal Mukundrao Magar JULY 20, 2016 AT 7:13 AM

Hello sir….. I want all que. And ans so please sir send me on my mail as pdf doc. Please sir….. REPLY

Amol Gaikwad JULY 19, 2016 AT 3:37 PM

Hello sir, please send me listing questions and answers above. . REPLY

Amol Gaikwad JULY 19, 2016 AT 3:34 PM

hello sir, please send me this pdf listing questions an answer above. … REPLY

shahjeb khan JULY 19, 2016 AT 1:56 PM

These r vry important Thnks sir Sir can u plse send all these ques & ans to my mail

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

60/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

id My mail is [email protected] REPLY

Muzammil JULY 19, 2016 AT 1:23 PM

Plz send me PDF files… Sir REPLY

Rahul JULY 17, 2016 AT 6:50 PM

Sir, I want these questions plz snd it to my email . [email protected] REPLY

vasanth JULY 17, 2016 AT 5:31 PM

Pls send the pdf to [email protected] REPLY

Rai govind JULY 16, 2016 AT 5:05 PM

Haii sir please send me 200 qs REPLY

BINEET PRAJAPATI JULY 15, 2016 AT 1:11 PM

please sir send me this200Q&A pdf in my em ail [email protected] http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

61/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

Pratap Sing JULY 15, 2016 AT 10:49 AM

excellent !! sir plz send me these quetions in pdf format on my mail [email protected] REPLY

vivek kumar JULY 14, 2016 AT 11:05 AM

hello sir thanku so much sir for all informations plz can you send me mechanical engg questions answers on my email …. REPLY

vivek ramesh jadhav JULY 13, 2016 AT 6:51 PM

sir i want this 200 ques in pdf format.will you send to my mail pls REPLY

vivek ramesh jadhav JULY 13, 2016 AT 6:50 PM

Sir I want this Question in pdf

REPLY

anil JULY 21, 2016 AT 5:43 AM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

62/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Sir i want this in pdf format Sir send to [email protected] pls sir REPLY

satish JULY 12, 2016 AT 7:59 PM

its nice sir plz mail me this interview Q&A to my mail [email protected] REPLY

yousef alhabsh JULY 12, 2016 AT 9:06 AM

Hey sir, can you email me these questions and answers in pdf file plz on [email protected] Thanks YA REPLY

Shiva Rao JULY 9, 2016 AT 12:19 PM

Good it’s excellent, please send it to my E – mail ID sir REPLY

Sakure Pradip JULY 8, 2016 AT 6:54 PM

very nice, sir/mam please send me this que/ans on my e-mail [email protected]

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

63/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

Suneeldath JULY 7, 2016 AT 6:23 PM

pls send pdf format all. REPLY

biranu kumsa JULY 7, 2016 AT 2:59 PM

best thing you did.please send me pdf REPLY

Ajay JULY 6, 2016 AT 12:08 PM

sir plz send all these mechanical question and answer to my mail……. and also another questions n there answers which you have REPLY

Anand JULY 6, 2016 AT 3:54 AM

very nice and relevant ..plz send these in pdf form in my email id- [email protected] thanks

REPLY

fatehjit singh JULY 5, 2016 AT 9:12 AM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

64/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

sir,kindly send these questions in pdf format to [email protected] thank you. REPLY

Dharmendra kumar JULY 3, 2016 AT 6:23 AM

Thanks regarde sir,plz send me all me ques. PDF my email REPLY

Dharmendra kumar JULY 3, 2016 AT 6:21 AM

Thanks regard REPLY

vishal JULY 1, 2016 AT 6:21 AM

will u plz send me all question with answer REPLY

sunny JUNE 30, 2016 AT 1:11 PM

Hii…sir Very nice Please send me PDF to

[email protected] REPLY

amol http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

65/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

JUNE 30, 2016 AT 7:50 AM

i want this questions and ans can u send it on [email protected] REPLY

kiran sr JUNE 30, 2016 AT 6:16 AM

Sir i want this questions and answer plz send to my mail in pdf REPLY

Essa ali JUNE 28, 2016 AT 5:21 PM

Can you send me those questions to my email plz REPLY

Mayur patil JUNE 28, 2016 AT 12:10 PM

plz send me 200 questions with answers in pdf my mail id – [email protected] REPLY

arun choudhary JUNE 28, 2016 AT 6:22 AM

Please send me the pdf file of all mechanical engineering questions. Thank you. REPLY

Vinod http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

66/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

JUNE 27, 2016 AT 1:46 AM

Sir I want questions on catia hypermesh REPLY

pravinbhai JUNE 26, 2016 AT 3:51 PM

Sir i want this questions and ans. In pdf so pls sent on my mail [email protected] REPLY

pravinbhai JUNE 26, 2016 AT 3:36 PM

sir i want this 200 ques in pdf format.will you send to my mail pls.. REPLY

sandeep JUNE 26, 2016 AT 7:00 AM

sir,I want the mechanical engg questions & answers,can you pls send it to my mail REPLY

Rahul yadav JUNE 26, 2016 AT 4:22 AM

sir i want these questions on my e- mail id so please send me these question – answers in pdf form ……….. REPLY

Salman http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

67/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

JUNE 24, 2016 AT 11:34 AM

sir plz send me these questions in pdf to my mail…[email protected] or kindly send me the link to download….thank you.. REPLY

hemant JUNE 24, 2016 AT 7:12 AM

Sir, i want this questions and answer plz send to my mail [email protected] REPLY

Raval bhumi JUNE 24, 2016 AT 6:52 AM

Sir,plz send me 200 questions and ans. it will very useful to me.and also other technical questions if u have. REPLY

Upender Singh JUNE 23, 2016 AT 9:00 AM

sir i want to mechanical engg, interview question answer pdf to mail please sir REPLY

prasad JUNE 23, 2016 AT 7:29 AM

sir… i need these 200 mechanical questions and answers to my mail.. please sir.. REPLY http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

68/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

mohana c JUNE 23, 2016 AT 2:00 PM

good questions,please send to my mail id:[email protected] REPLY

ARUMUGAM S JUNE 21, 2016 AT 8:13 AM

Sir I am also want to request you to send this question and answer in PDF format plzz REPLY

Md Hannad Anwar JUNE 20, 2016 AT 8:16 AM

Thank you sir REPLY

Md Hannad Anwar JUNE 20, 2016 AT 8:15 AM

Thank you REPLY

Dev JUNE 19, 2016 AT 12:17 PM

sir, please send the pdf copy to me at

[email protected] REPLY

bhavesh http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

69/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

JUNE 19, 2016 AT 12:16 PM

Hello Sir, I want all of these Qs and Ans. SO plz send on my mail as PDF doc REPLY

bhavesh JUNE 19, 2016 AT 12:15 PM

Hello Sir, I want all of these Qs and Ans. SO plz send on my mail as PDF REPLY

P.Subramanyam JUNE 18, 2016 AT 3:47 PM

sir I want this 200 ques in PDF format . will u send to my mail I’d. REPLY

gaurav JUNE 15, 2016 AT 2:42 PM

Hello Sir, I want all of these Qs and Ans. SO plz send on my mail as PDF doc. Reply REPLY

akshay divekar http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

70/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

JUNE 12, 2016 AT 8:53 AM

Sir i want this questions and answer plz send to my mail REPLY

akshay divekar JUNE 12, 2016 AT 8:52 AM

Plz end me this pdf form REPLY

akshay divekar JUNE 12, 2016 AT 8:51 AM

Send me this pdf form REPLY

sandeep saini JUNE 11, 2016 AT 3:50 AM

Sir plz send me all questions in pdf format… REPLY

Sanket JUNE 10, 2016 AT 5:50 PM

Plzz sir Send me this question and answer pdf in my email id REPLY

jagadesh JUNE 10, 2016 AT 12:23 PM

plz send this questions in pdf format to my mail id http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

71/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

Rakesh Yadav JUNE 6, 2016 AT 3:06 PM

SIR please send pdf of these questions. I have to appear for rites mechanical get interview so if you will give me some suggestions i will always be thankful to you…give suggestions in my email… thank you REPLY

murugan JUNE 6, 2016 AT 2:40 PM

sir, may request, please send mech engg technical ques @ answer..send me mail… REPLY

Sarvnam JUNE 6, 2016 AT 7:04 AM

Plz send me this questions and answer sir REPLY

Sarvnam JUNE 6, 2016 AT 6:56 AM

Sir i want this questions and answer in pdf plz send to my mail [email protected] REPLY

Thirumalaivasan JUNE 6, 2016 AT 6:10 AM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

72/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

sir send this to my mail id REPLY

Nahid EQBAL JUNE 3, 2016 AT 6:40 PM

sir Please send on my email [email protected] REPLY

PHANI KUMAR JUNE 3, 2016 AT 9:38 AM

SIR I AM HAPPY TO SEE THIS PLEASE SEND ME THIS 200 BITS PDF IN TO MY MAIL MY MAIL IS [email protected] REPLY

Anant Sonwane JUNE 3, 2016 AT 6:51 AM

very good quations. please send me pdf. please sir REPLY

Anant Sonwane JUNE 3, 2016 AT 6:49 AM

Thank you very much very good Q. are collected according to interview point of view. sir i request you please send me pdf of these Q. REPLY

Harshad Jadhav http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

73/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

JUNE 2, 2016 AT 5:04 PM

Hello sir….. I’m harshad jadhav… I want above questions and answers in pdf format… Pls send these questions and answers on my email address…. [email protected] REPLY

Harshad Jadhav JUNE 2, 2016 AT 5:01 PM

Hello sir….. I’m harshad jadhav…. Sir I want above questions and answers in pdf format….. So please send these questions and answers in pdf format on my email address….. [email protected] REPLY

Sudip kumar bhim JUNE 2, 2016 AT 1:49 PM

Sir.really these questions are helpful.please send me all these pdf and answer in my mail. REPLY

Sumit Kumar JUNE 1, 2016 AT 5:27 PM

Sir I want these questions in PDF format . please send me these questions in PDF foramat.My email ID [email protected] REPLY

sarwar JUNE 1, 2016 AT 9:09 AM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

74/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Really very good questions according to interview point of view. So sir plz send me all 200qs and answer. REPLY

Rahul v hotti JUNE 1, 2016 AT 7:45 AM

sir please send pdf files to my email id REPLY

bikramaditya barik MAY 31, 2016 AT 1:46 PM

Sir I want to 200qus in pdf format.pl send me REPLY

vipul MAY 31, 2016 AT 3:25 AM

Plzz send me it REPLY

shiva MAY 30, 2016 AT 2:08 AM

sir i need this questions and answers with pdf, if their is any questions with multiple choose questions with answers, please send to my mail id

REPLY

Diya saini MAY 28, 2016 AT 1:06 PM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

75/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Sir i want this question answer in pdf file. Will you send to my mail? REPLY

vishal MAY 28, 2016 AT 8:15 AM

Sir pls send all que ans my mail adress REPLY

Sameer Nakhate MAY 26, 2016 AT 6:53 PM

Sir,I want this 200 questions in PDF format thank you REPLY

Hridesh Varshney MAY 26, 2016 AT 1:19 PM

Sir I want this 200 questions & answers in pdf file format.Will you my mail. Please sir REPLY

vijay kumar singh MAY 25, 2016 AT 5:47 PM

Sir can you send this questions because I need this questions.

REPLY

raju MAY 25, 2016 AT 7:19 AM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

76/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

sir . im preparing to ceptam . i have no coaching . Please send the mechanical questions . all subjects . it will help for my preparation . thanking u sir REPLY

Pritam kumar pusp MAY 19, 2016 AT 5:26 AM

Please sir I request to u send me PDF copies REPLY

jrsfer MAY 18, 2016 AT 8:53 AM

Sir Pls send PDF REPLY

Gagan MAY 17, 2016 AT 7:57 AM

Sir i want this questions and answer plz send to my mail [email protected] REPLY

Siddalingesh V Karanelli MAY 14, 2016 AT 12:20 PM

Very usefull questions n answers. Please send me PDF to my email id sir, [email protected] REPLY

Siddalingesh V Karanelli MAY 14, 2016 AT 12:12 PM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

77/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Nice, Sir please send me these in PDF please REPLY

vishal MAY 12, 2016 AT 6:06 PM

It’s good [email protected] REPLY

Satish nayak MAY 11, 2016 AT 4:47 PM

Hello Sir, I want all of these Qs and Ans. SO plz send on my mail as PDF doc. REPLY

Karthik E MAY 11, 2016 AT 5:16 AM

very useful.sir pls send this study materials to my mail [email protected] REPLY

Karthik E MAY 11, 2016 AT 5:12 AM

This is very useful to build strong basics of knowledge.sir could u pls send all this materials as pdf to my mail [email protected] REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

78/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Vishal sharma MAY 9, 2016 AT 7:05 PM

Sir please send me these questions & answer REPLY

Asif iqbak MAY 9, 2016 AT 12:12 PM

Sir I need this question and answer in PDF format.sir can u plz send d same REPLY

Sunil Mewada MAY 9, 2016 AT 11:08 AM

Sir I want to PDF all the mechanical interview questions, kindly send the PDF of questions. My mail ID is [email protected] REPLY

Dhilipan.n MAY 6, 2016 AT 9:05 AM

Sir., firstly I thank to you . You did a great job, these questions and answers very useful to me &my friends so can u send the pdf with questions & answers through my email ID: [email protected] REPLY

Omkar patil MAY 5, 2016 AT 5:32 PM

Hii.. Anyone give me all thise question in pdf format http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

79/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

seyfu tiruneh MAY 2, 2016 AT 9:01 AM

engir REPLY

seyfu tiruneh MAY 2, 2016 AT 9:01 AM

sir please send me this pdf copy and send me more mechanical engineering questions with thier answer by my email address. REPLY

seyfu tiruneh MAY 2, 2016 AT 8:59 AM

sir please send me this pdf copy and send me more mechanical engineering questions with thier answer by my email address REPLY

karthik APRIL 29, 2016 AT 11:36 AM

please send the pdf to [email protected] REPLY

Harinath shukla APRIL 27, 2016 AT 5:12 PM

Pls send all these questions on my mail id…[email protected] http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

80/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

Manjunath APRIL 22, 2016 AT 2:12 PM

plz send me pdf copy of this REPLY

Jeet APRIL 22, 2016 AT 10:26 AM

sir plz send me ME interview ques. and answer in my email id [email protected]…… REPLY

vikas APRIL 21, 2016 AT 4:06 AM

Respected Sir,

Thank you for the all the great work you have done. kindly do send me the pdf Mechanical questions to mail- [email protected] REPLY

Rahul Ranjan APRIL 20, 2016 AT 7:01 PM

sir plz send me all mechanical interview questions and answers email: [email protected] REPLY

gautam kolgaonkar APRIL 20, 2016 AT 2:20 PM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

81/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

its very useful ….. please send me pdf on mail REPLY

sachin pomane APRIL 20, 2016 AT 7:59 AM

sir I want this 200 questions and answers in pdf format .please send to my mail. REPLY

santosh kumar APRIL 20, 2016 AT 4:57 AM

pls sir send me 200 question with answers on my emai……. REPLY

Deepak chaudhary APRIL 19, 2016 AT 1:49 AM

Sr pls send me 200 mechanical que/ans. In my mail. REPLY

Deepak chaudhary APRIL 19, 2016 AT 1:43 AM

Sr. pls send me 200 que/ans pdf REPLY

ARSLAN APRIL 18, 2016 AT 11:19 AM

Very Informative… Thanks http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

82/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

I was insearch of these answers, they are really helpful. THANKS. If it is possible to send on email id.. please do this kind act … REPLY

PAVAN KUMAR APRIL 17, 2016 AT 11:21 AM

i would love to get all the 200 questions. please mail on [email protected] and any updates also… thanks alot REPLY

PAVAN KUMAR APRIL 17, 2016 AT 11:17 AM

I would love to get all the 200 questions. Would you please mail me on [email protected] REPLY

k.shafi APRIL 15, 2016 AT 5:55 PM

great job….very useful to mech….interviews…..pls send to in pdf formate……my mail [email protected] REPLY

salman Khan APRIL 15, 2016 AT 12:47 PM

Hi sir….it’s very useful for us plzzzzz could you mail me this Ques n ans pdf @ http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

83/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

[email protected] REPLY

Raju kumar APRIL 14, 2016 AT 4:3 3 PM

sir i want this 200 ques in pdf format.will you send to my mail pls.. REPLY

arun kumar APRIL 14, 2016 AT 12:23 PM

Sir I want these 200 questions in PDF format , will you send this to my e- mail id REPLY

Niranjan APRIL 13, 2016 AT 5:12 PM

Can u send me PDF file of this it’s an request REPLY

jay APRIL 13, 2016 AT 7:38 AM

Pls send me pdf file sir REPLY

sai vishnu APRIL 11, 2016 AT 11:49 AM

hello sir its very useful will u pls send me in pdf my email id [email protected] http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

84/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

jay APRIL 11, 2016 AT 6:24 AM

I want pdf file for all those question ..pls help me REPLY

Shriram Verma APRIL 11, 2016 AT 12:54 AM

Sir in Isentropic process heat transfer takes place????? Plz go through 100 no. question (difference between isentropic & throttling) REPLY

AJAY APRIL 9, 2016 AT 4:24 PM

sir can you please send me the the interview question answers …its very much helpful REPLY

sudhanshu shekhar APRIL 9, 2016 AT 2:20 AM

sir plz send me the question and their ans to my mail in pdf form, I will be thankful to you

REPLY

Vishal jogani APRIL 8, 2016 AT 7:21 AM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

85/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Sir please me PDF of questions and answers of mechanical engineering REPLY

mayank chandra devshali APRIL 7, 2016 AT 12:15 PM

NICE ONE QUESTION ALL SIR CAN U SEND PLZ ALL QUESTION IN PDF IN MY Mail id

[email protected] REPLY

mayank chandra devshali APRIL 7, 2016 AT 11:42 AM

Dear, sir plz send the all question with ans in pdf for me REPLY

Aceinmech APRIL 4, 2016 AT 2:20 PM

Sir i want this questions and answers in pdf format,please send me on email id. REPLY

Chandan APRIL 4, 2016 AT 9:29 AM

Plz send this pdf in my mail [email protected] REPLY

Amit kumar APRIL 1, 2016 AT 2:45 PM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

86/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Sir pls send me complet pdf [email protected] REPLY

JOy APRIL 1, 2016 AT 11:29 AM

Please send This pdf File to my mail id… REPLY

Ombir phalswal MARCH 31, 2016 AT 4:07 AM

Sir I want this question in pdf . Will u send them on my mail . REPLY

rahul saini MARCH 29, 2016 AT 10:46 AM

sir, please send these questions in pdf format….. [[email protected]] REPLY

E.Haridas MARCH 27, 2016 AT 7:44 AM

Sir please send me these questions and answers to my mail: [email protected] REPLY

jaysukhbh ai MARCH 26, 2016 AT 11:41 AM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

87/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Sir… These are very useful to all.. Plese send me the pdf formet of these 200 question and answers… To my mail [email protected] REPLY

balwant lokhande MARCH 26, 2016 AT 11:36 AM

sir please send me this all question in pdf format on my email [email protected] REPLY

Dilip maiti MARCH 20, 2016 AT 2:31 PM

first I would like to thanks all the student & engineer.this is the right way for improve our self. REPLY

 engineer

MARCH 22, 2016 AT 10:28 AM

Ok Dilip maiti i will send you questions and answers pdf REPLY

akshay OCTOBER 16, 2016 AT 2:57 PM

bhai can you send me those question which you got from #engineer (this page admin) REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

88/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

akshay OCTOBER 16, 2016 AT 2:57 PM

can you mail me those question which you got from #engineer (this page admin) REPLY

ganesh chand MARCH 20, 2016 AT 9:34 AM

sir can u plz send me all mechanical & automobile questions with answers….it will be very helpfull for me…. thank you REPLY

nick MARCH 18, 2016 AT 9:11 AM

sirji mah email id [email protected] REPLY

nick MARCH 18, 2016 AT 9:09 AM

hello sir its awesome…, sir after few days mah interview will b held so plz send its pdf as soon as possible. thanks u. REPLY

Ashutosh Raj MARCH 18, 2016 AT 6:57 AM

Pls send on mail id–[email protected] REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

89/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ashutosh Raj MARCH 18, 2016 AT 6:56 AM

Sir,please Send Question and answer PDF to my mail id—[email protected] REPLY

BARATH KUMAR MARCH 17, 2016 AT 10:42 AM

sir, i need this 200 ques pdf .will you send to my mail. REPLY

David Obada MARCH 15, 2016 AT 10:15 PM

Please send this to my email as PDF. Thank you so much REPLY

David Obada MARCH 15, 2016 AT 10:14 PM

Thanks for this. Very very informative. Please can you send this 200 questions and answers to my email as PDF. Thanks REPLY

ankit sharma

MARCH 12, 2016 AT 7:01 PM

sir please send me all of these question to my email id in pdf format my email- [email protected] http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

90/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

sharad MARCH 10, 2016 AT 4:58 AM

plz send me PDF of 200 mechanical engineering interview questions and answer and also refrigeration and air conditioning questions and answers REPLY

suraj MARCH 7, 2016 AT 4:49 AM

sir i want sending mechanical questions and answers REPLY

A, Prasad MARCH 6, 2016 AT 8:53 AM

Sir… These are very useful to all.. Plese send me the pdf formet of these 200 question and answers… To my mail [email protected] REPLY

 engineer

MARCH 6, 2016 AT 6:10 PM

Ok A.prasad i will send you Questions and answers PDF REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

91/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

prasad MARCH 6, 2016 AT 8:48 AM

Sir… These are very useful for all… Sir can you please send me these to my mail… . [email protected] Please send me REPLY

 engineer

MARCH 6, 2016 AT 5:42 PM

Ok prasad i will send you Questions and answers PDF REPLY

Shiva prasad MARCH 6, 2016 AT 6:40 AM

Plz send me in PDF format to [email protected] REPLY

 engineer

MARCH 6, 2016 AT 5:41 PM

Ok Shiva prasad i will send you Questions and answers PDF REPLY

Alok kumar singh MARCH 5, 2016 AT 3:34 PM

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

92/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

sir i want to hvac(ahu) question and answer with pdf formate. please send me REPLY

 engineer

MARCH 6, 2016 AT 5:39 PM

Ok Alok kumar singh i will send you Questions and answers PDF REPLY

Deepak MARCH 4, 2016 AT 2:55 AM

It is very helpful . Good Job . Can you please help me with the PDF REPLY

 engineer

MARCH 4, 2016 AT 4:32 PM

Ok Deepak i will send you Questions and answers PDF REPLY

Nilesh Gupta MARCH 3, 2016 AT 5:25 PM

Sir I want pdf of same

[email protected] REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

93/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

 engineer

MARCH 4, 2016 AT 4:28 PM

Ok Nilesh Gupta i will send you Questions and answers PDF… REPLY

narayanan MARCH 3, 2016 AT 11:15 AM

plese send me in all questions in pdf REPLY

 engineer

MARCH 3, 2016 AT 4:34 PM

Ok narayanan i will send you Questions and answers PDF REPLY

mayur ingale MARCH 3, 2016 AT 6:26 AM

pls send me questions and answer of this 200 questions in pdf formate REPLY

 engineer

MARCH 3, 2016 AT 4:32 PM

Ok mayur ingale i will send you Questions and answers PDF REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

94/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

KTS MARCH 2, 2016 AT 5:34 AM

Need specific Q & A for steel structure & fabrication industry for Business Head REPLY

 engineer

MARCH 2, 2016 AT 11:30 AM

Ok KTS i will update that Questions and answers PDF REPLY

snehal FEBRUARY 29, 2016 AT 7:09 PM

tell me sir what type of technical question for mechanical engg. ask in ONGC Interview . plz give me feeb back fast. send imp. REPLY

 engineer

MARCH 1, 2016 AT 3:44 AM

Ok snehal k i will send you Questions & answers PDF…… REPLY

Ajinkya FEBRUARY 28, 2016 AT 4:48 PM

Sir i want this questions and answer plz send to my mail REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

95/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

 engineer

FEBRUARY 28, 2016 AT 5:38 PM

Ok Ajinkya i will send you Questions & answers PDF…… REPLY

Ganesh FEBRUARY 28, 2016 AT 11:28 AM

I want these questions and ans pdf. REPLY

 engineer

FEBRUARY 28, 2016 AT 2:01 PM

Ok GANESH i will send you all Questions and answers PDF…… REPLY

ishwar DECEMBER 27, 2016 AT 1:24 PM

Hello sir.sir pls tell me the book name or writter name which about i c diesel and petrol engines in pure information with easy llanguage in my email id.pls sir. REPLY

GANESH FEBRUARY 28, 2016 AT 11:01 AM

Hello Sir,

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

96/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

I want all of these Qs and Ans. SO plz send on my mail as PDF doc. REPLY

 engineer

FEBRUARY 28, 2016 AT 2:01 PM

Ok GANESH i will send you Questions and answers PDF…… REPLY

Salman JUNE 24, 2016 AT 1:21 PM

respected sir….these 200 questions are very useful….plz send me to my

mail…[email protected] otherwise send me link to download pdf. REPLY

deepak kumar JANUARY 1, 2017 AT 2:37 PM

SIR PLEASE SEND ME PDF FILE

[email protected] REPLY

ajay kumar FEBRUARY 27, 2016 AT 12:14 PM

Sir send me these interview material as PDF in my I’d [email protected] http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

97/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

 engineer

FEBRUARY 27, 2016 AT 12:15 PM

Ok ajay kumar now i will send you Questions and answers PDF REPLY

SUDHARSAN M R FEBRUARY 25, 2016 AT 7:35 AM

PLZ SEND ALL THESE QUESTIONS TO MY MAIL AS SOON AS POSSIBLE SIR REPLY

 engineer

FEBRUARY 25, 2016 AT 8:51 AM

Ok i will send you Questions & answers pdf REPLY

Piyush FEBRUARY 23, 2016 AT 1:57 PM

How can I get that Questions REPLY

 engineer

FEBRUARY 25, 2016 AT 8:46 AM

Ok i will send you Questions & answers pdf REPLY

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

98/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Zelalem Desta NOVEMBER 22, 2016 AT 6:24 PM

please sir send thus interview questions on my email adress and send if possible different worked design projects by pdf

[email protected] REPLY

manisha jagtap FEBRUARY 22, 2016 AT 5:13 AM

sir plz send all these question and answer to my mail……. and also another questions n there answers which you have REPLY

 engineer

FEBRUARY 25, 2016 AT 8:42 AM

Ok i will send you Questions and answers pdf REPLY

ANKIT CHAUDH ARY FEBRUARY 21, 2016 AT 8:48 PM

plz snd pdf files of questions on my mail REPLY

 engineer

FEBRUARY 25, 2016 AT 8:41 AM http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

99/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Ok i will send you Questions and answers pdf REPLY

Sarver khan FEBRUARY 21, 2016 AT 12:35 PM

sir plzzs send me in pdf REPLY

 engineer

FEBRUARY 25, 2016 AT 8:40 AM

Ok i will send you Questions and answers REPLY

Rachti Raval FEBRUARY 20, 2016 AT 9:38 AM

Pls Send ma this Interview question..Very helpful.. REPLY

 engineer

FEBRUARY 25, 2016 AT 8:38 AM

Ok i will send you Questions and answers pdf REPLY

DHINESH A S FEBRUARY 17, 2016 AT 2:55 PM

Send to my mail id…these 200 questions and answers.. http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

100/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

 engineer

FEBRUARY 17, 2016 AT 4:33 PM

Ok DHINESH A S i will send you Questions & answers pdf REPLY

suraj MARCH 7, 2016 AT 4:52 AM

sir i want mechanical questions and answers REPLY

Naveen kumar srivastav FEBRUARY 12, 2016 AT 8:10 PM

sir I want thermal engineering viva question & answer in pdf file. plg send on my email REPLY

 engineer

FEBRUARY 13, 2016 AT 8:03 AM

Ok Naveen kumar srivastav i will send you answers pdf REPLY

sheick SEPTEMBER 1, 2016 AT 10:08 AM

Please send me too http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

101/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

REPLY

kalish FEBRUARY 7, 2016 AT 4:28 PM

Sir i want this questions and answer plz send to my mail REPLY

 engineer

FEBRUARY 7, 2016 AT 4:47 PM

Ok Kalish i will send you mechanical engineering questions and answers REPLY

BALARAMAN FEBRUARY 7, 2016 AT 6:22 AM

sir i want this 200 ques in pdf format.will you send to my mail pls.. REPLY

 engineer

FEBRUARY 7, 2016 AT 1:34 PM

Ok Balaraman I will send you Mechanical questions and answers REPLY

v.shashank FEBRUARY 6, 2016 AT 8:35 PM

Tq REPLY http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

102/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

 engineer

FEBRUARY 7, 2016 AT 1:33 PM

wel come V.shashank…Please share this for your friends also REPLY

Kunti kumari AUGUST 22, 2016 AT 5:38 PM

Study material is helpfull .so sir could you please send me the mechnical engineering pdf of questions & ans. REPLY

Ethiraj SEPTEMBER 2, 2016 AT 2:03 PM

Could send above questions aand answer to my mail REPLY

LEAVE A REPLY Your email address will not be published. Required fields are marked *

Comment

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

103/104

5/18/2017

200 TOP MECHANICAL Engineering Interview Questions and Answers Mechanical Interview Questions

Name *

Email *

Website

Engineering interview questions,multiple choice questions,objective type questions,seminor topics,lab viva questions and answers ,online quiz test pdf free download for freshers. Terms & Conditions | Privacy Policy | Contact us | About us

http://engineeringinterviewquestions.com/mechanical-engineering-interview-questions-and-answers/

104/104

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF