Midas_Civil PSC 2 Span Composite Girder Bridge using wizard...
MIDAS
Technical Material
Tutorial 2-Span PSC Composite I Girder Bridge
00 2-Span PSC Composite I Girder Bridge Overview - A two span of 23m long composite bridge consisting of five precast, post tensioned girder beams sp aced at 3m centers are generated using beam elements with defined construction stages. - The behavior of the bridge under Static loads, Prestress loads and Moving loads are examined
In this tutorial we will learn the following things; - How to generate composite sections in midas Civil. - How to assign static and prestress load in midas Civil. - How to define moving load as per Eurocode in midas Civil. - How to define composite section for construction stages in midas Civil. - How to interpret the tendon losses, forces, stresses represented by midas Civil. - How to formulate load combinations in midas Civil. Program Version
Civil 2016 (v1.1)
Revision Date
December, 2015
- How to carry out PSC composite design as per Eurocode in midas Civil.
Step
00
Specifications of the Bridge
Bridge Type: Span Length: Width: Moving Loads: Time Dependent Material:
PSC composite bridge (Composite I + girder) 23-m, 2-Span 15 m Eurocode Eurocode
2-Span PSC Composite I Girder Bridge
3
Step
00
General Arrangement Detail of the Bridge
3D View of the Model generated in midas Civil
3m 0.25m 0.15m
0.15m 0.50m
0.50m
0.10m 1.20m
0.30m
0.025m 1.525m
0.10m 0.15m 0.45m
0.45m
Mid Section
End Section 2-Span PSC Composite I Girder Bridge
4
Step
00
General Arrangement Detail of the Bridge
Structural sections Expansion Gap between the 2 spans is 40mm. Girders are spaced 3m c/c.
Support Section
CL of Girder
Tapered Section
Mid Section
0.3m
0.45 m
0.5m 2m
3m
6.5m
Half Girder Elevation 2-Span PSC Composite I Girder Bridge
5
Step
01
Modeling >
Generating Model
Model Generation – Define Units
1
3
Invoke midas Civil 1
Open New File
2
Select the Unit System [ kN, m]
3
Save as ‘2-Span PSC Bridge’
. 2
2-Span PSC Composite I Girder Bridge
6
Step
01
Modeling >
Material Properties 4
Model Generation – Material Properties 1 2 3 4
1 2
Go to “Properties” Click on “Material Properties” Click on “Add” to define materials Define Material data: Name > C35/45 Type of design> Concrete Concrete Standard > EN04(RC) DB: C35/45 Click on Apply Name > C25/30 Type of design> Concrete Concrete Standard > EN04(RC) DB: C25/30 Click on Apply Name > Diaph Type of design> Concrete Concrete Standard > EN04(RC) DB: C35/45 Click on Apply Name > Substructure Type of design> Concrete Concrete Standard > EN04(RC) DB: C25/30 Click on Apply
3
5
Name> Tendon Type of Design: Steel Steel Standard: EN05(S) DB: S235 Click on Apply 5
Click on OK
2-Span PSC Composite I Girder Bridge
7
Step
01
Modeling >
Time Dependent Material Properties
Model Generation – Time Dependent Material Properties 1
Change unit system [ N, mm ]
2
Go to “Properties”
3
(Creep/Shrinkage)”
4
Click on “Add” to define properties
5
Define Creep / Shrinkage data: Name > C35/45 C&S Code > European Compressive strength of concrete at the age of 28 days > 35 N/mm2 Relative Humidity of ambient environment (40–99) > 70 Notational size of member > 1000mm Age of concrete at the beginning of shrinkage > 3 days Click on Apply
6
1
2 3
5
4
Name > C25/30 C&S Code > European Compressive strength of concrete at the age of 28 days > 25 N/mm2 Other data are same as above Click on Apply 7
7
6
Click on Show Result to see the graph Note: To get the creep & shrinkage strains, the value of relative humidity is to be considered as 70%, Notational size of member, h as 1000mm and Age of concrete at the beginning of shrinkage as 3 days. Later, the h value would be automatically updated for composite sections
2-Span PSC Composite I Girder Bridge
8
Step
01
Modeling >
Time Dependent Material Properties
Model Generation – Time Dependent Material Properties 1
Go to “Properties”
2
Click on “Comp. Strength”
3
Click on “Add” to define properties
4
Define Compressive Strength data: Name > C35/45 Comp Type > Code Development of Strength > Code > European) Mean compressive strength of concrete at age of 28 days (fck+delta_f) > 43N/mm2 Click on Redraw Graph Click on OK
5
6
1
3
2
4
Click on Add Name > C25/30 Comp Type > Code Development of Strength > Code > European Mean compressive strength of concrete at age of 28 days (fck+delta_f) > 33N/mm2 Click on Redraw Graph Click on OK
5
6
2-Span PSC Composite I Girder Bridge
9
Step
01
Modeling >
Time dependent Material Link 3
Model Generation – Time Dependent Material Link 1
Go to “Properties”
2
Click on “Material Link”
3
Time Dependent Material Link Data 4
Creep/Shrinkage > C35/45 C&S
5
Comp. Strength > C35/45 Comp
6
Double click on C35/45 under
1 2 4
5
6
Materials to shift it to the Selected Materials list 7
Click on “Add / Modify”
Repeat steps 4 to 7 with following
7
input: Creep/Shrinkage > C25/30 C&S Comp. Strength > C25/30 Comp
Double click on C25/30 under Materials to shift it to the Selected Materials list Click on “Add / Modify” 8
Click on “Close”
Any time during the modeling, analysis and design stage, invoking F1 key takes you to web help.
8
2-Span PSC Composite I Girder Bridge
10
Step
01
Modeling >
Defining Section 1 4
Model Generation – Defining Girder Support Section
7 2
1
Change unit system [ KN, m ]
2
Go to “Properties” > Section
5
Properties” 3
Click on “Add..”
4
Click on tab “Composite”
5
Select Section type “Composite6
General” 6
8
Import “mid section sec file” created using SPC.
7
Enter Section Name as “Mid”
8
Check option “Composite Section
33
9
10
for PSC Design” & Enter Web Thick. For Shear (total) as “0.4m” 9
Click “Change Offset” Select Offset : Center- Top Click “OK”
10
Click “Apply”
Note: For getting the correct transformed properties of the composite section, the material properties for slab and girder should be defined accordingly in SPC (Section property Calculator) for creating the section.
2-Span PSC Composite I Girder Bridge
11
Step
01
Modeling >
Defining Section
Model Generation – Girder Mid 3
1
Select Section type “Composite-
1
General” 2
Import “support section sec file” created using SPC.
3
Enter Section Name as “Sup”
4
Check option “Composite Section for PSC Design” & Enter Web Thick. For Shear (total) as “0.9m”
5
Click “Change Offset”
2
Select Offset : Center- Top Click “OK” 6
Click “Show Calculation Results”
7
Click “Apply”
4
5
6
7
Note: Invoke the section data window by following Steps 1 to 4 in Page 11.
2-Span PSC Composite I Girder Bridge
12
Step
01
Modeling >
Defining Tapered Section 1
Model Generation – Defining Tapered Section 2
Note: Invoke the section data window by following Steps 1 to 4 in Page 11.
3
Click on tab “Tapered”
1
4
Select “Composite General Section” 2
Define Taper Right Section:
Similarly Define Taper Left Section:
3
Enter name as “Mid-Sup”
Enter name as “Sup-Mid”
4
Click “Import Section” for section-i
Click “Import Section” for section-i
and import “mid section sec
and import “support section
file”
sec file”
5
.
8
Click “Import Section” for section-j
and import “support section
and import “mid section sec
sec file”
file”
Check option “Composite Section for
6
7
Click “Import Section” for section-j
6
Check option “Composite Section for
PSC Design” & Enter Web Thick.
PSC Design” & Enter Web Thick.
For Shear (total) as “0.4m” and
For Shear (total) as “0.9m” and
“0.9m” as shown for i and j
“0.4m” as shown for i and j
ends respectively
ends respectively
Click “Change Offset” Select Offset : Center- Top Click “OK”
Click “Change Offset” Select Offset : Center- Top Click “OK”
Click on “Apply”
5
Click on “Apply”
7 8
Note: The internal Process of calculation of sectional property as per dimensional variation is explained in the help file. Path: Help > Contents > Start > Model > Properties > Section > Tapered tab, under Note, click on ‘Details’
2-Span PSC Composite I Girder Bridge
13
Step
01
Modeling >
Defining Section
Model Generation – Defining Cross Girder Section 1
Go to “Properties”
2
Click on “Section Properties”
3
Click on “Add..”
4
Click on tab “DB/User”
5
Define End Diaphragm: Name > End Diaphragm Section Type > Solid Rectangle Select “User” H > 1.4m, B > 0.45m Click “Change Offset” Select Offset : Center- Top Select Vertical Offset: “User” User offset Reference: Extreme fiber(s) Enter value of I: > -0.25 Click on “Apply”
4 5 1 2
3
7
6
Define Internal Diaphragm: Name > Internal Diaphragm Section Type > Solid Rectangle Select “User” H > 1.4m, B > 0.3m Click “Change Offset” Select Offset : Center- Top Select Vertical Offset: “User” User offset Reference: Extreme fiber(s) Enter value of I: > -0.25 6
Click “Show Calculation Results”
7
Click on “OK”
5
Note: To define prismatic sections in midas Civil, go to Models > Properties > Section > Value and here enter the section properties directly instead of section dimensions. To know how sectional properties are calculated go to Help > Contents > Start > Model > Properties > Section > Section Properties
2-Span PSC Composite I Girder Bridge
14
Step
01
Modeling >
Defining Section
Model Generation – Defining Pier Cap & Pier Sections 1
Go to “Properties”
2
Click on “Section Properties”
3
Click on “Add..”
4
Click on tab “DB/User”
5
Define Pier Cap : Name> Mid Pier Cap Section Type > Solid Rectangle Select “User” H > 1.5m, B > 1.5m Click “Change Offset” Select Offset : Center- Top Click on “Apply”
4 5 1 2
3
Define Pier: Name > Pier Section Type > Solid Track Select “User” H > 1.5m, B > 3m 6
Click “Show Calculation Results”
7
Click on “OK”
6
7
Note: To define prismatic sections in midas Civil, go to Models > Properties > Section > Value and here enter the section properties directly instead of section dimensions. To know how sectional properties are calculated go to Help > Contents > Start > Model > Properties > Section > Section Properties
2-Span PSC Composite I Girder Bridge
15
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1
Click on “Structure”
2
Click on “Prestressed Composite
1 2
Bridge” wizard 3
Enter Span information as “
[email protected] ”m
4
Enter Deck width as “ 15 ” m
5
Enter Spacing(a) as “ 0.04 ” m & Spacing(b) as “ 0.5 ” m
6
Enter Elastic link Stiffness for bearings of Abutment & Pier as
3
4
Kx = “1e+8” kN/m 5
Ky = “1000” kN/m Kz = “1000” kN/m 7
Enter Elastic link length as “0.1”m
8
Select Material for Pier and Pier-cap as “Substructure” , select Section as
6
“Pier-Cap” & enter its Length as 7
“13.5”m 9
Select Section as “Pier” & enter its
Height as “10”m
8 9
2-Span PSC Composite I Girder Bridge
16
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1
Click on “Section” tab
2
Enter Deck Thickness as “ 0.25”m
1 2
Select Deck material as “ C25/30 ” 3
4
3
Select Girder material as “ C35/45 ” Select Diaphragm material as “ Diaph”
4
Enter Number of Girders as “5” and click “Apply” and enter girder
6
offsets as “-6, -3 , 0, 3, 6” respectively for girders “1 to 5” 5
Select Diaphragm sections at End &
5
Pier support locations as “End Diaphragm” and for intermediate diaphragm as “Internal Diaphragm” 6
For Transverse deck element, select “ Divisions per span ” and
8 7 9
number of divisions as “21” 7
Enter No. of Divisions as “5” and click “Apply”. Select sections and
enter end lengths as shown. 8
Repeat Step 7 for “Span2”
9
Uncheck “Generate 10th points..” option 2-Span PSC Composite I Girder Bridge
17
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1
Click on “Tendon” tab
2
Click “ …” to define Tendon property
3
Click “Add” Enter Tendon Name “Tendon” Select Tendon Type “Internal(PostTension” Select Material “Tendon” Click “…” in the dialog box for Total Tendon Area Select Strand Diameter “15.2mm(0.6”)” Enter Number of Strands “12” Click “OK” Enter Duct Diameter “0.09”m Select Relaxation Coefficient “European – Low”
4
Click “OK”
5
Click “Close”
1
2
3
5
4
2-Span PSC Composite I Girder Bridge
18
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1
2
3 4
Enter Tendon Data in the table as Shown Change Jacking Stress to
4
“1395000” kN/m^2 Click “Add” Change Segments to “Span2” & repeat Step3
1
2
3
2-Span PSC Composite I Girder Bridge
19
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1 2
3
4
5
1
Click on “Load” tab Enter widths b1= b5 = “0.5”m b2= b4 = “7”m b3= “0”m Enter wet Con’c density as “25”kN/m^3 & Thickness as “0.25”m Enter Crash Barrier load intensity as “9”kN/m. Also uncheck the option of “Median Strip” loading Enter Wearing Surface load Density as “22”kN/m^3 &
2
3
5 4
Thickness as “0.1”m.
2-Span PSC Composite I Girder Bridge
20
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1 2
1
Click on “Construction Stage” tab Check “Reinforcement” option
3
and Click on “Define Reinforcement…” 3
Select “Mid section”
4
Click on “Multi Add”
5
Enter Reinforcement data as
2
shown in the tables 6
click “OK”
7
Click “Apply”
4
7 5
6
2-Span PSC Composite I Girder Bridge
21
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1 2
1
Click on “Construction Stage” tab Check “Reinforcement” option
3
and Click on “Define Reinforcement…” 3
Select “Mid section”
4
Click on “Multi Add”
5
Enter Reinforcement data as
2
shown in the tables 6
click “OK”
7
Click “Apply”
4
7 5
Note: In case the diameter of rebars is not in terms of P(dia), then change the rebar material code from Tools Preferences Design Concrete Rebar Material Code Select IS(RC) & Click OK 6
2-Span PSC Composite I Girder Bridge
22
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1 2
1
Click on “Shear Reinforcement” Enter Shear Reinforcement data under “Diagonal
2
Reinforcement” as Pitch: 0.15m Angle: 90 [deg] Aw: 0.0004022 m^2 (2Legs 5
of P16) 3
Click “Apply”
4
Click “Copy Reinforcements to..” Select “Sup” Section and Click “ -> ” Click “OK” Click “Close”
5
6 7 8
Click “OK” in the wizard window.
6 4 3
7
8
2-Span PSC Composite I Girder Bridge
23
Step
01
Modeling >
Creating Elements 1
Model Generation – Creating Elements (Girder Mid) 1
Click on “Node/Element” tab
2
Click on “Translate” Elements
2
3
option. 3
Type “1to22by3” in element selection box, press Enter Goto Works menu
4
Select “Move” option for translation
5
4
Enter distance dx,dy,dz: “ 0.5,0,0 ”m
6
Click ”Apply”
7
Type “3to24by3” in element
5
selection box, press Enter similar to Step3 8
Change distance to dx,dy,dz: “ -0.5,0,0 ”m similar to Step5
8
Click ”Apply” as in Step6
9
Click ”Close” 6
9
2-Span PSC Composite I Girder Bridge
24
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1
1
Switch to Front View by clicking the button as shown
2
4
3
Goto Tree Menu Works SectionDouble click on “Sup” section to select relevant elements
3
Click on “Activate” button
4
Click on select by window button and select elements
X
as shown. 5
Drag and Drop “Sup-mid”
2
5
section from Tree Menu in the Model Window.
X
2-Span PSC Composite I Girder Bridge
25
Step
01
Modeling >
Creating Elements
Model Generation – Creating Elements (Girder Mid) 1
1
Switch to Front View by clicking the button as shown
2
3
4
6
Goto Tree Menu Works Section Double click on “Sup” section to select relevant elements
3
Click on “Activate” button
4
Click on select by window button and select elements
X
as shown. 5
2
Drag and Drop “Mid-Sup” section from Tree Menu in
5 X
the Model Window. 6
Click on “Activate All” button to view the whole structure.
2-Span PSC Composite I Girder Bridge
26
Step
01
Modeling >
Define Taper Groups
Model Generation – Defining Tapered Section Groups 1
Right Click on the ribbon as shown
2
Check the “Tree Menu 2 “ Option and another Tree menu will appear on the right hand side.
3 4
1 2
Click on “Properties”
6
Click on “Tapered Group” Go to “Tree Menu” 6
7
Set Group Name as “Mid-Sup” Go to Tree Menu 2, Double Click on Mid-Sup Section & the element list will be updated as “95to98 125to128 153to156 183to186 211to214 241to244 269to272 299to302 327to330 357to360” Click on “Add”
3 4
Set Group Name as “Sup-Mid” Go to Tree Menu 2, Double Click on Sup-Mid Section & the element list will be updated as “77to80 107to110 135to138 165to168 193to196 223to226 251to254 281to284 309to312 339to342” Click on “Add” 8
Click on “Close” 7
8
2-Span PSC Composite I Girder Bridge
27
Step
01
Modeling >
Editing Geometry 1
Model Generation – Creating Elements (Girder Mid) 1
Click on “Node/Element” tab
2
Click on “Translate” Elements
2
option. 3
3
Type “244to252” in node selection box, press Enter Goto Works menu
4
Unselect “Only Free Nodes” option for translation
5
Click ”Apply” & “Close”
4
5
2-Span PSC Composite I Girder Bridge
28
Step
01
Load >
Creating Live Load Distribution Group
Moving Loads– Creating Cross Element Structure Group 1
2
1
Switch to Front View by clicking 3
the button as shown 2 3
Goto Tree Menu Group tab
7
Right Click on “Structure Group” & click “New”
4
Give the structure Group Name as “LL-Cross Beam“
5
4
6
Change Selection of “y” direction elements only from bottom ribbon.
6
Use
button to select the whole superstructure in front view as shown.
7
Drag and drop “LL-Cross Beam” structure group over the
5
model window. 8
Change Selection by direction to
8
“none”.
2-Span PSC Composite I Girder Bridge
29
Step
02
Load >
Defining Loads
Moving Loads – Define Lane
1
6
4 1
Go to “Load” tab
2
Click “Moving Load”
3
Select “EUROCODE” under Moving Load Code.
4
Click “Traffic Line Lanes” 5 6
7
Click “Add” Enter Lane Name “Lane1” View the figure provided Enter Lane Width “3”m Enter Eccentricity “-4.5”m Enter Wheel Spacing “2”m Select Vehicular load distribution “Cross beam” Select cross beam group LL-Cross Beam Select Moving direction as “Both” Select Selection by “2 Points” Click in the “Box” Click on node no. 5 Click on Node no. 6 Click “OK”
For other lanes, similarly change names, wheel spacing and eccentricities as below by reapeating Steps 5 to 7:
3 2
Moving Loads – Define Lane
Node no. 5
Enter Lane Name “Lane3” Enter Lane Width “3”m Enter Eccentricity “1.5”m Enter Wheel Spacing “2”m Enter Lane Name “Lane4” Enter Lane Width “3”m Enter Eccentricity “4.5”m Enter Wheel Spacing “2”m Enter Lane Name “RA1” Enter Lane Width “1.5”m Enter Eccentricity “6.75”m Enter Wheel Spacing “0.9”m Enter Lane Name “RA2” Enter Lane Width “1.5”m Enter Eccentricity “-6.75”m Enter Wheel Spacing “0.9”m
5
Enter Lane Name “Lane2” Enter Lane Width “3”m Enter Eccentricity “-1.5”m Enter Wheel Spacing “2”m
7
Node no. 6 2-Span PSC Composite I Girder Bridge
30
Step
02
Load >
Defining Vehicles
Moving Loads – Define Lane 1
Go to “Load” tab
2
Click “Moving Load”
3
Click “Vehicles”
4
Click “Add Standard”
5
Click “OK” to add Load Model 1
1 3
2
4
6
5
2-Span PSC Composite I Girder Bridge
31
Step
02
Load >
Defining Moving Load Cases
Moving Loads- Load Cases
1 3
1
Go to “Load” tab
2
Click “Moving Load”
3
Click “Moving load Cases”
4
Click “Add”
5
Enter Load Case Name as
2
4
5
“LM1_1.0TS+1.0UDL” 6
Check “Ignore Psi Factor” Option
7
Select all lanes from left and click on
10
6
“->” to bring all the lanes in
the selected lanes list. 8
Select Lanes “RA1 & RA2” from selected lanes list and click “->” to move them under
7
Remaining Area List. 9
Click “OK”
10
Click “Close”
8
9
2-Span PSC Composite I Girder Bridge
32
Step
02
Construction Stage>
Composite Section Definition
Construction Stage – Comp. Section Definition for Girder Elements 1
Go to “Load” tab
2
Click on “Construction Stage”
3
Click “Composite Section for C.S”
4
Click “Update all H”
5
Click “OK”
6
Select “Mid” Section definition
7
Click “Modify…”
8
Change Age for Part1 to “21”days and
1 3 2
6
7
4 5
Part2 to “7”days 9
Click “OK”
10
Repeat Step5 to Step7 by selecting “Sup” Section definition 8
9
2-Span PSC Composite I Girder Bridge
33
Step
02
Construction Stage>
Composite Section Definition
Construction Stage – Comp. Section Definition for Girder Elements 1
Click “Add”
2
Select “Stage2”
3
Select “Mid-Sup” section
4
For Part1 :
1
7
Enter Age as “21” days and h as “0.439”m
2
For Part2 :
3
Select Material Type “Material” Select Material “C25/35” Select Composite Stage “Stage3-2” Enter Age as “7” days and h as “0.23 5
Click “OK”
6
Repeat Step1 to Step5 by selecting
4
“Sup-Mid” Section in Step3 7
Click “Close” 5
2-Span PSC Composite I Girder Bridge
34
Step
03
Analysis >
Moving Load Analysis Control 1
Moving Load Analysis Control 1
Go to “Analysis” tab
2
Click “Moving Load”
3
Enter Distance between points : 0.3m
4
Select Analysis Results Frame
2
“Normal + Concurrent Force” Check “Combined Stress Calculation” 5
Click “OK”
3
4
5
2-Span PSC Composite I Girder Bridge
35
Step
03
Analysis >
Construction Stage Analysis
Construction Stage Analysis Control 1
Go to “Analysis” tab
2
Click “Construction Stage”
3
Change Beam Section Property
1 2
Changes to “Constant” 4
Click “OK”
3
4
2-Span PSC Composite I Girder Bridge
36
Step
03
Analysis >
Perform Analysis
Run Analysis 1 2 1
Go to “Analysis” tab
2
Click “Perform Analysis”
2-Span PSC Composite I Girder Bridge
37
Step
04
Result>
Combination 1
Load Combination 2 1
Go to “Results” tab
2
Click “Load Combination”
3
Click “Concrete Design” tab
4
Click “Auto Generation…”
5
Select Design Code “Eurocode 0”
6
Select “ST+CS”
7
Select “Both” option
8
Click “OK”
9
Click “Close”
3
5
6
7
4 9
8
2-Span PSC Composite I Girder Bridge
38
Step
04
Result>
Service Stage Stresses 1
Service Stage Stresses 1
Go to “Results” tab
2
Click “Stresses” “Beam Stresses
2
Diagram” 3
Select Load Combination “CBCmax: 3
cLCB3” which is the critical service combination 4 4
Select “Part1” which is Girder part
5
Select point “4(-y,-z)” for viewing stresses at bottom left corner of the I
girder. 6
Check the “Legend option” option
7
Click “Apply”
8
Change the units to “N,mm”
5
6
7
8
2-Span PSC Composite I Girder Bridge
39
Step
04
Result>
Design 1
Design as per Eurocode 2 1
Go to “PSC” tab
2
Select “Eurocode2-2:05” and click on “Parameters”
3
Click “Select All” Click “OK”
4
Select “Part1” which is Girder part
3
4
2-Span PSC Composite I Girder Bridge
40
Step
04
Result>
Design
Design as per Eurocode 1 1
Click “PSC Design Material”
2
Click “C35/45” in Material List
3
Select for Girder concrete Material Code: EN04(RC) 2
Grade: C35/45 4
Select for Girder Rebar Material Code: EN04(RC) 3
Grade of Main Rebar: Class B Grade of Main Rebar: Class B 5
Select for Slab concrete Material
4
Code: EN04(RC) Grade: C25/30 5 6
Select for Slab Rebar Material Code: EN04(RC) Grade of Main Rebar: Class B
6
Grade of Main Rebar: Class B 7
Click “Modify” & “Close” 7
2-Span PSC Composite I Girder Bridge
41
Step
04
Result>
Design
Design as per Eurocode 1
Click “Design/Output Position”
1
“Design Position”
4 2
2
Type “318 331” elements nos in the element selection box and press enter
3
Click “Apply” & “Close”
4
Click “Design/Output Position” “Output Position”
5
Repeat Step2
6
Click “Apply” & “Close”
3
6
2-Span PSC Composite I Girder Bridge
42
Step
04
Result>
Design
Design as per Eurocode 1
Click on “Shear Connector” option
2
Type “318 331” elements nos in the
7 6 1
2
element selection box and press enter Enter Interface Shear Input as: 3
Angle: 0 [deg]
4
Aw: 2355 mm^2 Fy: 500 N/mm^2
5
Click “Apply” & “Close”
6
Click “Perform Design” button to
perform design 7
Click “Excel Report” button after performing design to get design output in excel sheet format for elements 318 & 331
3
2-Span PSC Composite I Girder Bridge
43
Step
04
Result>
Stresses 1
Result Verification 2 1
Go to “Results” of Main Menu
2
Click “Stresses”
3
Click “Beam Stresses”
4
Select Load Cases/Combinations “
5
Select “Components”
6
Click Type of Display “Contour”
7
Click “Apply”
8
See the Contour diagram in the
4 3 5
6
“Model View” window
8
7
Note: To view the results in tables, click Results Tables and browse to required quantity Note: The significance of various stress components are clearly explained in detail in the help file . Path: Help > Contents > Start > Result > Stresses > Beam Stresses
2-Span PSC Composite I Girder Bridge
44
Step
04
Result>
Tendon Loss 1 2
Result Verification 1
Go to “Results” tab
2
Click “Result Tables”
3
Click “Tendon”
4
Click “Tendon Loss”
5
See the various tendon loss in tabular
By grouping the tendons, the average prestress force at the CG of the cables along the length of the bridge can be seen in Tendon Arrangement (Path: Results > Result Tables > Tendon > Tendon Arrangement.)
format in the window “Result[tendon Loss (Tendon Group)]”
4
3 5
Note: Similarly the tables of tendon Coordinates, Elongation , Weight can be checked.
2-Span PSC Composite I Girder Bridge
45
Step
04
Result>
Elastic Link Forces (Bearing Forces) 1
Result Verification 1
Go to “Results” tab
2
Click “Result Tables”
3
Click “Elastic Link…”
4
Check “LM1_1.0TS+1.0UDL(Mv:max)”
5
Click “OK”
6
See the various forces in the bearings
2
6
3
in “Result-[Elastic Link]”
4
Note: Similarly, forces for all the cases could be viewed, which could be used for design of bearings.
5
2-Span PSC Composite I Girder Bridge
46
Step
05
Additional Features (1) DXF Import Important considerations: Polyline in dxf file will be imported as a plate elements. Surface in dxf file will be imported as a plate element. Solid cannot be imported. Unit system must be consistent.
import Line Beam Elements
import Polyline Rectangle
import
Plate Element
3-D Face
2-Span PSC Composite I Girder Bridge
47
Step
05
Additional Features (2) Integral Bridge • Using the formulation proposed by B.M. Lehane, soil springs can be assigned. • To account for this characteristic of the soil, lateral springs are modeled as compression-only springs and vertical springs are modeled as linear elastic springs.
2-Span PSC Composite I Girder Bridge
48
Step
05
Additional Features (3) Loads
Self weight Specified Displacement of Supports Pressure Load Temperature Load System Temperature - for applying the change in temperature to whole structure. Nodal Temperate – for applying change in temperature to certain nodes. Element Temperature –for applying change in temperature to certain elements. Temperature Gradient – for applying change in temperature to beam and plate sections. Beam Section Temperature – for applying temperature gradient to beam sections (General Sections and PSC sections).
2-Span PSC Composite I Girder Bridge
49
Step
05
Additional Features (4) Section Property Calculator
• The Import function permits the use of AutoCAD DXF files. • Simple data entry using various modeling functions • The section property calculations are provided for the input section configuration by generating fully automated optimum meshes. • The properties of hybrid sections composed of different material properties can be calculated
2-Span PSC Composite I Girder Bridge
50
Step
[email protected]
Bridging Your Innovations to Realities
2-Span PSC Composite I Girder Bridge
51
