Configuration FSMF with FBBA/FBBC module can be used for: •Dual RF band 3-sector configurations with standard 2TX/2RX with FSMF •6 sector configurations with default 2TX/2RX •2TX and 4RX configurations •4TX and 4RX configurations
RA4120AEN60GLA0
50
LTE FDD Nokia Solution
RA4120AEN60GLA0
51
LTE FDD Nokia Solution
RA4120AEN60GLA0
52
LTE FDD Nokia Solution
RA4120AEN60GLA0
53
LTE FDD Nokia Solution
RA4120AEN60GLA0
54
LTE FDD Nokia Solution
•
In RL30 implementation FHCC support bands 850 MHz, 1800 MHz and 10 MHz bandwidth in dedicated, coupled and mixed mode.
•
Current RL60 implementations FHCC support additional band 2600 MHz and extended to 20 MHz bandwidth (for band 1800 and 2600) in dedicated mode only.
•
Only single band (850, 1800 or 2600) configurations per one FSME/FSMF System Module per one FHCC RIU is possible.
•
It is possible to configure dual band configuration in one FSME/FSMF and then two RIUs can be connected to one FSME/FSMF where each RIU supports different frequency band respectively.
RA4120AEN60GLA0
55
LTE FDD Nokia Solution
RA4120AEN60GLA0
56
LTE FDD Nokia Solution
RA4120AEN60GLA0
57
LTE FDD Nokia Solution
•One System Module can support a combination of two cells of 20MHz and two cells of 10 MHz bandwidth with 2TX MIMO • Following configurations are supported with required radio HW and with FSME/FSMF for Korean market: •
LGU+ •20MHz @2.6GHz (FRHB) and 10MHz @ 850MHz (FHCA) •20MHz @2.6GHz (FRHA) and 10MHz @ 850MHz (FXCA) •20MHz @2.6GHz (FRHB) and 10MHz @ 2.1GHz (FRGQ) •20MHz @2.6GHz (FRHA) and 10MHz @ 2.1GHz (FRGP)
•
SKT •20MHz @1.8GHz (FHEA/FHEB) and 10MHz @ 850MHz (FXCC) •20MHz @1.8GHz (FXEB) and 10MHz @ 850MHz (FXCA)
•
KT •20MHz @ 1.8GHz (FHEA) and 10MHz @ 900MHz (FHDB)
Thank you for interesting in our services. We are a non-profit group that run this website to share documents. We need your help to maintenance this website.