1 Complete Weaving Mill

1 Complete Weaving Mill with 80 looms (Airjet and Rapier looms), Warp preparation (Direct Warpers and Sizing Machines), Inspection, Winding, Testing, Knotting etc. WARP PREPARATION 1 BENNINGER DIRECT WARPER, BEN-DIRECT 1000-1800, year 1998 working width 1800 mm, max. speed 1200m/min., with Benninger V-Creel, type: BEN-SENS-546 546 creeling positions + reserve, pitch 290 mm warp accumulator: model FIL-ACUMULATOR 1 SUCKER MUELLER SIZING MACHINE (WETSIZE-technology), year 2002 roller width 2000 mm, working width 1800 mm / headstock max., comprising out of: - 2 Beam Creels ANPf for each 12 beams, 1800 mm width between the flanges and flange diam. 1000 mm, side movable (motor driven), with pneumatic brakes, - 1 Unwinding regulation by LOADCELL measuring roller from 0 – 2700 kN - 1 WETSIZE size box , each with 2 pre-wetting rollers (max. pressure 70 kN), 1 pre-squeezing roller (10 kN) and 2 main squeezing rollers (50 kN) max 40 kN, - 2 partitioning rods (motor driven) - 1 PLEVA size application control and regulation (Telecoll) (System SICAM), consisting of: - software integrated in the PC software - 1 complete PLEVA size application control device type AS 120 - 1 Cylinder dryer with total 11 drying cylinders, consisting of: Z2/2 version (pre-dryer 2 + 2 cylinders) + ZT7 dyrer with 7 drying cylinders max. diameter 800 mm, pressure 5 bar, built from previously existing sizing machine with 3 new electronic temperature controls - 1 partitioning field, 11 rods - 1 Mahlo “Textometer” type EMC-9 humidity measuring and control device for autom. regulation of machine speed in relation to humidity of the warp aat the exit of the cylinder dryer - 1 electronic Headstock WE-10, 3200 mm cylinder width, max. beam pipe width 3000 mm, warping width min. 840 – max. 2600 mm for flange diam. 450 - 1016 mm, max. beam length 2920 mm machine speed 10 - 125 m/min, with crwal speed abt. 5 m/min beaming force 400 – 5000 N, pressure 300 – 6000 N - 1 machine process control LOGOS COMSIZE, 380 V/50Hz, process control of steering and adjustments via monitor: in-built PC with 10” monitor and integrated hard disk, option for tele-diagnosis for maintenance, monitoring or trouble-shooting

- 1 Control Panel 400 Volts, 50 cycles - Size Kitchen 1 Rotor cooker RK 121, with stainless steel tank 1.000 ltr.

1 KARL MAYER SIZING MACHINE, type Rotal, year 1996/98 roller and cyl. width 2000 mm, working width 1800 mm max. working width at headstock 2100 mm, max. speed 120 m/min., consisting of: - Beam creel, type RN-12-1800/1000 for 12 beams 1800 mm between the flanges, max. 1000 mm flange diam., pneum. Brakes, individually controlled - Size trough, type 1800 2 x 2 squeezing rollers, 2 diving roller, automatic temperature regulation automatic dosing of of sizing material - waxing device - Cylinder dyer, 11 drying cylinder modernized in 1996 - Warp tension regulation device, type ULN-1800 - partitioning field - Beaming Machine / Headstock, type ID 2700/1000 Cylinder width 2700 mm, max. working width: 2100 mm Max. Flange diam. 1016 mm - Dinax 1 – computer system: Unwinding tension on the stand on warping rollers, regulation of warp and traction tension, regulation of temperature, funds of delay in tensive zones, regulation of squeezing pressure, residual moisture, machine speed, metering of wrapped quantity possibility of placing of 60 setting dates in the memory..

10 SOMET RAPIER WEAVING LOOMS, Thema Super Excel, year 2003 working width 2300 mm, 4 weft colors, Socos, with Fimtextile Dobby, Type RD 860 , 16 Levers installed speed up to 510 rpm, fabric weight up to 700 g/sqm, weft density 8-200 picks/cm, each loom equipped with : 10 – 12 heald frames 2 warp beams - 1000 mm flange diameter 5000 heddles & droppers 4 Weft Feeders LGL Sirio Progress with creel and weft stand with Formia Nuova batcher, Type TCSE 230

1 SOMET RAPIER WEAVING LOOM, Thema Super Excel-ALPHA, year 2003 Working width 2300 mm, 4 weft colours,

with electronic Fimtextile Dobby, Type RD 860 - 16 Levers installed , speed up to 510 rpm, weight up to 700 g/sqm, weft density 8-200 picks/cm equipped with : 10 – 12 heald frames 2 warp beams - 1000 mm flange diameter 5000 heddles & droppers 4 Weft Feeders LGL Sirio Progress with creel and weft stand with Formia Nuova Batcher, Type TCSE 230 AIR-JET WEAVING 18 SOMET AIRJET WEAVING LOOMS, type Mythos, year 2002, working width 1900 mm, 4 weft colors, with electronic Stäubli Dobby, Type 2871 - 12 levers installed each loom is equipped with : 6 - 8 heald frames 2 warp beams - 1000 mm flange diameter 5000 heddles & droppers 4 Weft Feeders ROY ELF with creel and weft stand with Formia Nuova Batcher, Type TCSE 230

12 PICANOL AIRJET WEAVING LOOMS, type Delta X-2P, year 2000, working width 1900 mm, 2 colours, speed up to 800 rpm fabric weight up to 500 g/sqm, PFT system with positive Stäubli Cam Motion, type 1610, 8 Levers installed DRC2 quick lock, double whip roller equipped with : 6 heald frames 2 warp beams - 1000 mm flange diameter 5000 heddles & droppers 2 Weft Feeders Picanol 2231B with creel and weft stand with Picanol Batcher, PBM 21 PICANOL AIRJET WEAVING LOOMS, type PAT-A 190, year 1990, Working width 1900 mm, 2 Colors with Staubli electronic Dobby, Type 2560 - 12 Levers installed each loom equipped with : 8 - 10 heald frames 2 warp beams - 1000 mm flange diameter 5000 heddles & droppers 2 Weft with creel and weft stand with Formia Batcher 1 SOHLER TRAVELLING BLOWER, year 2004 complete with railway system, … for the better efficiency in the weaving

2 KAESER SPIRAL COMPRESSOR , year 2000/2002 1 x Type FS 360 and 1 x FS 440 capacity 2385 m3/hour, pressure 6 bar, el.motor 250 kW equipped with : Cyclone Condensation Damper, Type ZK 08 Autom. Steam Trap, Type Eco-Drain 14 Micro filter Combination FFG-708D Splitter of Condensation, Type Aquamat 6 Proclima Suction Tube with 2 Kaeser air dryers, year 2000/2 Type TI 751 KE Capacity 75 m³/min El.motor 9,4 kW 1 cloth inspection machine, make PLM, Rotron ML30 – 1990 / 1999 with unwinder built 1999, max roller width 2400 mm 2 Classic inspection tables ELITEX AUXILIARY EQUIPMENT 1 WARP TYING MACHINE, STÄUBLI TOPMATIC-TPM 200 PC, year 2001 computer controlled, with knotting trolley TPF1-25 cm 1 WARP TYING MACHINE, STÄUBLI-TOPMATIC TPM 200 PC, year 1999 computer controlled, with knotting trolley ww 200 cm 1 WARP TYING MACHINE, STÄUBLI-TOPMATIC TPM 200 PC, year 1997, computer controlled, with knotting trolley ww 200 cm, year 2003 1 WARP TYING MACHINE, USTER TOPMATIC - TPM 200, year 1985 with knotting trolley ww 200 cm 4 WARP TYING MACHINES, USTER- UMM mech. 1 TABLE for maintenance/repair of warp tying machines with 2 oil-bathes 1 REED DRAWING-IN MACHINE, make Titan, year 2002 type BE-PC with automatic control. the machine never damages the reed. This machine can work with normal, profiled

and double reeds. Technical features: The machine calculates and memorise automatically the dent spacing, manual programming of the number of dents. 4 REED DRAWING-IN MACHINES, make USTER, complete with stand, year 1973 1 REED DRAWING-IN MACHINE, make USTER, year 2001 complete with stand 1 REED CLEANING MACHINE, make Vollenweider, type BBA 1 CATCH-SELVEDGE WARPER, make Incentrum (CZ), year 2000 with creel, 10/12 position, with el. stop motion 1 SPOOLER / WINDING MACHINE, year 1983 4 positions 1 DOUBLING SPOOLER / WINDING MACHINE, year 1999 12 positions, and creel YARN TESTING LABORATORY COMPLETE USTER TESTER I, with: Spectrograph Imperfection Indicator Control Unit Monitor, Keyboard, Printer Big lot of Spare Parts 1 USTER TENSORAPID 3, year 2000 with Signal Processor, keyboard, printer and Isoinspect FABRIC STRENGTH TESTING 1 TEARING STRENGTH TESTER for fabrics, electronic 1 WARP BEAM AND HARNESS TRUCK, make Genkinger, year 2002 type KHR 12 GEV, hydraulic, capacity for beam 1.200 kg and for harness 200 kg 1 WARP BEAM LIFTING TRUCK with craddle (Mould), Genkinger, year 2001 type KHUM 10/10, hydraulic, capacity 1.000 kg, for beams and batches 5 TRUCKS (MOULDS) FOR BIG BATCHES, year 2.000 1 WARP BEAM LIFTING TRUCK with craddle (Mould), Genkinger, year 1996 type KHUM 15/10, hydraulic, capacity 1.500 kg, for beams and batches

4 WARP BEAM TROLLIES, year (3) 1996, (1)2001 hydraulic, for empty beams, capacity 300 kg 1 WARP BEAM LIFTING TRUCK, make Genkinger, year 1994 type GWB400, hydraulic, capacity 400 kg, light and slim execution

2 WARP BEAM LIFTING TRUCKS, make Genkinger, year 1985/86 type KH 58/15, hydraulic, capacity 1.500 kg FURTHER MACHINERY FOR THE WARP PREPARATION 1 AUTOCONER, make Schlafhorst year 1989 modernized in 2005 Type: 138-GKU-X-P, 1 x 50 spindles, splicer, with electronic clearers Zellweger Uster D4- MK15 4 AUTOCONERS, make Schlafhorst year 1969 , 2x 1970, 1971 , 3 x 50, 1 x 30 spindles 3 WARPING MACHINE TOTEX Year 1986 (1 wide, 2 narrow), with creel 1 DOUBLING MACHINE Year 1988, Type ZR-16/48 Machines are mill floor and are partly prepared for shipment, delivery immediate Ref. No. BIB91275