NOT FOR SALE OUTSIDE SINGAPORE
SINGAPORE STANDARD
SS EN 206-1 : 2009 (ICS 91.100.30)
SPECIFICATION FOR
Concrete Part 1 : Specification, performance, production and conformity This national standard is the identical implementation of EN 206 : 2000 and is adopted with permission of CEN, Rue de Stassart 36, B-1050 Brussels
Published by SPRING Singapore 2 Bukit Merah Central Singapore 159835 SPRING Singapore Website: www.spring.gov.sg Standards Website: www.standards.org.sg
NOT FOR SALE OUTSIDE SINGAPORE
SINGAPORE STANDARD
SS EN 206-1 : 2009 (ICS 91.100.30)
SPECIFICATION FOR
Concrete Part 1 : Specification, performance, production and conformity This national standard is the identical implementation of EN 206 : 2000 and is adopted with permission of CEN, Rue de Stassart 36, B-1050 Brussels
All rights reserved. Unless otherwise specified, no part of this Singapore Standard may be reproduced or utilised in any form or by any means, electronic or mechanical, including photocopying and microfilming, without permission in writing from SPRING Singapore at the address below: Head Standardisation Department SPRING Singapore 2 Bukit Merah Central Singapore 159835 Telephone: 62786666 Telefax: 62786667 Email:
[email protected]
ISBN 978-981-4278-02-7
SS EN 206-1 : 2009
Contents Page National Foreword
8
Introduction
10
CLAUSES 1
Scope
11
2
Normative references
12
3
Definitions, symbols and abbreviations
14
3.1
Terms and definitions
14
3.2
Symbols and abbreviations
17
4
Classification
18
4.1
Exposure classes related to environmental actions
18
4.2
Fresh concrete
21
4.3
Hardened concrete
23
5
Requirements for concrete and methods of verification
24
5.1
Basic requirements for constituent materials
24
5.2
Basic requirements for composition of concrete
25
5.3
Requirements related to exposure classes
30
5.4
Requirements for fresh concrete
31
5.5
Requirements for hardened concrete
33
6
Specification of concrete
34
6.1
General
34
6.2
Specification for designed concrete
35
6.3
Specification for prescribed concrete
36
6.4
Specification of standardized prescribed concrete
37
7
Delivery of fresh concrete
37
7.1
Information from the user of the concrete to the producer
37
7.2
Information from the producer of the concrete to the user
37
7.3
Delivery ticket for ready-mixed concrete
38
7.4
Delivery information for site-mixed concrete
39
7.5
Consistence at delivery
39
8
Conformity control and conformity criteria
40
8.1
General
40
8.2
Conformity control for designed concrete
40
8.3
Conformity control of prescribed concrete including standardized prescribed concrete
46
8.4
Actions in the case of non-conformity of the product
47
5
SS EN 206-1 : 2009 Page 9
Production control
47
9.1
General
47
9.2
Production control systems
48
9.3
Recorded data and other documents
48
9.4
Testing
49
9.5
Concrete composition and initial testing
49
9.6
Personnel, equipment and installation
50
9.7
Batching of constituent materials
51
9.8
Mixing of concrete
51
9.9
Production control procedures
52
10
Evaluation of conformity
57
10.1
General
57
10.2
Assessment, surveillance and certification of production control
58
11
Designation for designed concrete
58
ANNEXES A (normative)
Initial test
59
B (normative)
Identity testing for compressive strength
61
C (normative)
Provisions for assessment, surveillance and certification of production control
63
D (informative) Bibliography
66
E (informative) Guidance on the application of the equivalent performance concept of concrete properties
67
F (informative) Recommendations for limiting values of concrete compositions
68
G (informative) Text deleted
70
H (informative) Additional provisions for high strength concrete
71
J (informative) Performance-related design methods with respect to durability
73
K (informative) Concrete families
75
ZZA (informative) Singapore guidelines – General
77
ZZB (informative) Singapore guidelines – Testing temperature
80
TABLES 1
Exposure classes
19
2
Limiting values for exposure classes for chemical attack from natural soil and ground water
21
3
Slump classes
22
4
Vebe classes
22
5
Compaction classes
22
6
Flow classes
22
6
SS EN 206-1 : 2009 Page 7
Compressive strength classes for normal-weight and heavy-weight concrete
23
8
Compressive strength classes for light-weight concrete
23
9
Classification of light-weight concrete by density
24
10
Maximum chloride content of concrete
29
11
Tolerances for target values of consistence o
32
12
Strength development of concrete at 20 C
38
13
Minimum rate of sampling for assessing conformity
42
14
Conformity criteria for compressive strength
42
15
Confirmation criterion for family members
43
16
Conformity criteria for tensile splitting strength
44
17
Conformity criteria for properties other than strength
45
18
Conformity criteria for consistence
45
19a Acceptance numbers for conformity criteria for properties other than strength and 19b
46
20
Recorded data and other documents, where relevant
49
21
Tolerances for the batching process of constituent material
51
22
Control of constituent material
53
23
Control of equipment
55
24
Control of production procedures and of concrete properties
56
B.1
Identity criteria for compressive strength
61
F.1
Recommended limiting values for composition and properties of concrete
69
H.1
Control of constituent materials
71
H.2
Control of equipment
72
H.3
Control of production procedures and of concrete properties
72
FIGURE 1
Relationships between SS EN 206-1 and standards for design and execution, standards for constituent materials and test standards
7
9
SS EN 206-1 : 2009
National Foreword This Singapore Standard was prepared by the Technical Committee on Building Structure and Substructure under the purview of the Building and Construction Standards Committee. This standard is the result of the review of SS 289 : Parts 1 to 4 : 2000 – ‘Specification for concrete’. SS EN 206-1 together with SS 544 – ‘Concrete – Complementary Singapore Standard to SS EN 206-1 – Part 1 : Method of specifying and guidance for the specifier and Part 2 : Specification for constituent materials and concrete’ replaces the SS 289 series of standards. This Singapore Standard is identical to EN 206-1 ‘Concrete – Part 1 : Specification, performance, production and conformity’ and is adopted with permission of CEN, rue de Stassart 36, B-1050 Brussels. This SS EN incorporates the CEN Amendments 1 (July 2004) and 2 (June 2005). The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags, eg, text altered by CEN amendment A1 is indicated by A1>