Module 7 Essay Questions

Module 7 essay questions 1. Describe Describe how you you would would make a hole hole in metal, metal, composite composite and wood, wood, discuss discuss this in context of aircraft maintenance, state the precautions to be taken and include any limits or tolerances that the usage of these tools can achieve. 2. Describe Describe the inspection inspection in-situ in-situ of of a brake unit, unit, what what would be your your actions actions if  you find a brake worn to limits. 3. Describe Describe how tooling tooling and equipment equipment is is controlled controlled within within a part 145 145 maintenance organisation. 4. There is 2 inches inches of wet wet snow on on the aircraft aircraft and light light snow snow is still falling, falling, the the temperature is –2 deg, what are your considerations before releasing the aircraft for departure. 5. You notice notice that that there is no hydraulic hydraulic pressure pressure indicated indicated on the left system, system, details your actions. 6. There is is water contami contamination nation in the fuel tank, tank, how how would would you carry out out a water fuel contamination test and what are the other tests you could carry out, describe any follow-up actions if contamination is found and continues in the future. 7. Micrometers Micrometers and and dial test test indicator indicatorss are used as precision precision equipme equipment nt discuss discuss the use of these equipment, their limitations and state the precautions to be taken when using them. 8. On a major major hangar hangar inspection inspection,, you find corrosi corrosion on on a panel on an un pressurised area of the fuselage, detail your actions to return the aircraft to service. 9. Describe Describe how you you would would replace replace an electronics electronics card, and the precaut precautions ions you you would take. 10. Describe the problem of HIRF and discuss the design features of protection against HIRF.