Civil Engineering Books Collection

August 9, 2017 | Author: rexand.cariaga6999 | Category: Earthquake Engineering, Precast Concrete, Concrete, Geotechnical Engineering, Structural Analysis
Share Embed Donate


Short Description

Download Civil Engineering Books Collection...

Description

Civil Engineering Books Collection Structural Engineering Handbook 28.23 MB Structural Details in Concrete 7.43 MB Bridge Design Manual 2000 - Hydraulic Design 0.52 MB Bridge Design Manual 2003 6.07 MB Design Manual Metric 18.81 MB ANSYS - Methods of Analysis 9.58 MB Finite Element Analysis of Structural Steelwork Beam to Column Bolted Connections 0.41 MB Generative Assembly Structural Analysis 1.17 MB Structural Analysis 1.81 MB Finite Element Method - Boundary Element Method - Course Notes 2001 0.95 MB Finite Element Method - Boundary Element Method - Course Notes 2003 0.80 MB Fixed Grid Finite Element Analysis in Structural Design & Optimization 0.22 MB The Finite Element Method Using Matlab 1.02 MB Finite Element Method Volumes 1, 2, 3 54.93 MB Finite Element Methods - Lectures 1.11 MB Forensic Structural Engineering Handbook 23.34 MB Euro code 3 - Design of Steel Structures Part 1-8 General Design of Joints 2.19 MB Euro code 3 - Design of Steel Structures 1 DD ENV 1993 11.22 MB Metallic Materials Properties Development & Standardization 70.36 MB Composites Materials Handbook Vol4 1.08 MB Engineering - Structural ANSYS Tutorials Part 1 97.66 MB Part 2 97.66 MB Part 3 97.66 MB Part 4 44.77 MB Biaxial-Mutiaxial Fatigue & Fracture 9.15 MB Failure Analysis Case Studies 8.43 MB Beginning AutoCAD 2002 10.85 MB Modeling with AutoCAD 2002 11.71 MB Safety at Work 8.76 MB Encyclopedia of Forensic Sciences 36.91 MB Project Planning & Control 7.15 MB A Guide to MS Excel 2002 for Scientists & Engineers 5.43 MB Geologic Analysis of Naturally Fractured Reservoir 5.53 MB Biomaterials Science - An Introduction to Materials in Medicine 36.68 MB PASSWORD(if required) try engineering-books.blogspot.com or www.AvaxHome.ru

Civil Engineering by admin @ 8:51 pm. • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

- Bridge Maintenance, Inspection and Repair - Builder’s Foundation Handbook - Hazardous waste land disposal - land treatment - Physical Oceanography - Soil Stabilization for Pavements - Soil and Geology Procedure for Foundation Design Building - Standard Practice for Concrete Pavements - Water treatment - Water desalination - Dewatering and Groundwater Control - Water Supply, Water Distribution - Water Supply - Pumping Station - Sanitary and Industrial Waste Water Collection - Pumping Station - Cathodic Protection System for Civil Works Structure - Design, Construction and Operation Small Water System - Inspection, Evaluation and Repair of Hydraulic Steel Structures - Design of Pile Foundation - Behaviour of Fiber-Reinforced Polymer Composite Piles under Vertical Load - Concrete Repair - Concrete Crack and Partial-depth Spall Repair - Standard Practice for Flexible Pavements - Geotechnical Engineering Procedures for Foundation Design of Buildings and Structures - Planning and Commissioning Wastewater Treatment Plants - Design and Construction of Driven Pile Foundation - Protective Coatings and Paints - Handbook on Plumbing Installation for Buildings - Standard Practice for Pavement Recycling - Systems Engineering for Intelligent Transportation Systems - Fire Protection Engineering for Facilities - Telecommunications Building Cabling Systems Planning and Design - Seismic Design for Buildings - Monitoring Well Design, Installation, and Documentation at Hazardous Toxic, and Radioactive Waste Sites - Engineering Properties of Resin Modified Pavement (RMP) for Mechanistic Design - Guide for The Use of Low-density Concrete in Civil Works Projects - High Performance Concrete Structural Designer Guide - Highway Engineering Field Formulas - Soil Mechanics

DOWNLOAD CIVIL/STRUCTURE CODE AND STANDARD 1. ACI 315-99 DOWNLOAD 2. ACI 318-99 DOWNLOAD 3. API RP 2A-WSD DOWNLOAD 4. API RP 2A-LRFD DOWNLOAD 5. SNI BAJA (03-1729-2000) DOWNLOAD 6. SNI BETON (03-1729-2002) DOWNLOAD 7. SNI GEMPA (03-1729-2001) DOWNLOAD DOWNLOAD OTHER CIVIL/STRUCTURE eBOOK (PASSWORD : free2share) 1. International Building Code® 2006, 18.1MB DOWNLOAD 2. M.Y.H Bangash - Structural Details in Concrete with drawings, PDF, 7.1 MB DOWNLOAD 3. Roger L. Brockenbrough - Structural Steel Designer's Handbook (3rd Edition), 8.8MB DOWNLOAD 4. ABC-Clio Inc - 2001 - Encyclopedia of Architectural and Engineering Feats, 5.9 MB DOWNLOAD 5. Jan Bijen - Durability of engineeringstructures - Design, repair & maintenance, 5.4MB DOWNLOAD 6. J.H.BUNGEY - Testing of Concrete in Structures, PDF, 4.6MB DOWNLOAD 7. Reinforced Concrete Council - Practical Yield Line Design, PDF, 4.0MB DOWNLOAD 8. Wayne B. Geyer - HANDBOOK OF STORAGE TANK SYSTEMS, 4.0MB DOWNLOAD 9. UBC Structural Code 1997 - Volume 2, PDF, 3.3MB DOWNLOAD 10. ARBED - Practical Design of Sheet Pile Bulk Head, 3.0MB DOWNLOAD 11. Dr. Fu Hua Chen, P.E - SOIL ENGINEERING, 2.9MB DOWNLOAD 12. Jaffe - Masonry Instant Answers - McGraw Hill 2004, 2.0MB DOWNLOAD

13. Offshore Standard DNV-OS-C201 Structural Design of Offshore Units, 1.8MB DOWNLOAD 14. Lightweight Aggregate Concrete, 1.7MB DOWNLOAD 15. Environmental Engineering Dictionary and Directory, 1.5MB DOWNLOAD 16. Ascalew Abebe & Dr Ian GN Smith - Pile Foundation Design: A Student Guide, 1.2MB DOWNLOAD 17. McGRAW-HILL - Dictionary of Engineering, 4.8MB DOWNLOAD 18. Ramachandran, V.S - HB of Analytical Techniques in Concrete Science & Tech, 8.4MB DOWNLOAD 19. NCEES - Fundamental of Engineering, Supplied Refference Handbook, 4.4MB DOWNLOAD 20. British Standards - BS 5950 - Steelwork Design, Steelwork Specification, 3.8M DOWNLOAD 21. Hoe l. Ling - Reinforced Soil Engineering - Advances in Research and Practice, 5.6MB DOWNLOAD 22. Design of Masonry Structure, 3.2MB DOWNLOAD 23. YONG BAI - MARINE STRUCTURAL DESIGN, 8.5MB DOWNLOAD 24. The Design Guide For The Fire Protection Of Buildings, 2000, 1.3MB DOWNLOAD 25. Tong, Mouritz & Bannister - 3d Fibre Reinforced Polymer Composites, 4.9MB DOWNLOAD 26. Arnold Verruijt - Soil Mechanics Handbook, Delft University Of Technology, 5.8MB DOWNLOAD 27. Deborah D.l. Chung - Applied Materials Science, 1.4MB DOWNLOAD 28.Awad S.hanna - Concrete Formwork System, 1.1MB DOWNLOAD 29. Sami Khan - Design Guide Post-tensioned Concrete Floors, 12.1MB DOWNLOAD 30. D.V.hutton - Fundamentals Of Finite Element, 3.6MB DOWNLOAD 31. Cimsteel - Design For Construction The Steel Construction Institute, 1.8MB DOWNLOAD

32. Hicks - Welded Design Theory And Practice, 3.4MB DOWNLOAD 33. Tyler G. Hicks - Civil Engineering Formulas, MCGraw-Hill, 2.1MB DOWNLOAD 34. ASCE 7-05 - Minimum Design Loads for buildings and other Structures, 18.1MB DOWNLOAD 35. Eurocode 3-design Of Steel Structures, 11.4MB DOWNLOAD 36. Standard Handbook For Civil EngineersMCGraw-Hill 2004, 13.8MB DOWNLOAD 37. S.S Ray - Reinforced Concrete Analysis And Design, 12.0MB DOWNLOAD 38. Nicholas P. Cheremisinoff - Handbook Of Wastewater Treatment, 11.3MB DOWNLOAD 39. R. Barry - The Construction Of Building, Volume 2, 10.2MB DOWNLOAD 40. Pay Guthrie - The Architect Portable Handbook, MCGraw-Hill, 9.2MB DOWNLOAD 41. API No . 327 - Above ground Storage Tank Standards, A Tutorial, 3.0MB DOWNLOAD 42. AWWA M11-1989 - Steel pipe Design and Installation, 4.1MB DOWNLOAD 43. AISC 1990 - Manual of Steel Construction, 2nd Edition, 24.0 MB DOWNLOAD 44.Geotechnical Earthquake Engineering Handbook, 22.8 MB DOWNLOAD 45. Timoshenko - Strength of materials II, 18.8 MB DOWNLOAD 46. Tyler G. Hicks - Handbook of Civil Engineering Calculations, 30.9 MB DOWNLOAD 47. McGraw Hill - Forensic Structural Engineering Handbook 2000, 12.2 MB DOWNLOAD 48. Hudson Harrison - Engineering rock Mechanics, 7.6 MB DOWNLOAD DOWNLOAD CIVIL/STRUCTURE SOFTWARE 1. PCACol 3.1 2. BETON 2000 3. CONVERTER DOWNLOAD 4. SLOPE W/ Student Edition DOWNLOAD

STANDAR NASIONAL INDONESIA • • • • • • • •

SNI 03-4814-1998 :Spesifikasi Bahan Penutup Sambungan Beton Tipe Elastis Tuang Panas (down-load PDF 44 kb) SNI 03-6431 -2000 ( Pd M-19-1999-03) : Metode Pengujian Waktu Alir Beton Berserat Dengan Kerucut Uji Slump Yang Dibalik (down-load PDF 13 kb) SNI 03-6814-2002 : Tata Cara Pelaksanaan Sambungan Mekanis Untuk Tulangan Beton (down-load PDF 74 kb) SK SNI 03 - xxxx - 2002 (16 Desember 2002) : Tata cara perhitungan struktur beton untuk bangunan gedung (down-load PDF 3.45 Mb) SNI 03 - 1729 - 2002 Tata Cara Perencanaan Struktur Baja Untuk Bangunan Gedung (down-load PDF 2.7 Mb) SNI – 1726 - 2002 : Standar Perencanaan Ketahanan Gempa Untuk Struktur Bangunan Gedung (down-load PDF 372 kb) SNI 07-0329-2005 : Baja profil I-beam proses canai panas Bj.P I-Beam (down-load PDF 422 kb) Pedoman Teknis : “Metode Pembangunan Jalan Berbasis Tenaga Kerja”, Edisi Pertama, dipersiapkan untuk Kementerian Pembangunan Perdesaan, oleh Bjorn Johannessen Engineering Consultant dan I.T. Transport Ltd Consultants in Transport for Rural Development (buku 195 halaman, down-load PDF 4.25 Mb)

Link pada artikel lain yang terkait dengan tema di atas • • • • • • • • • •

standard uji produk besi , dari ASTM kiriman Wisnu Kusumoaji , tentang ASTM spesifikasi pembebanan, dari ASCE untuk tukang dan insinyur bangunan, tentang IBC 2003 A C I 3 1 8 - 0 2 lengkap Eurocode 3: Design of steel structures Eurocode 2: Design of concrete structures Sharing Knowledge - SNI 1726-2002 AISC 2005 gratis Sayeed Hossain’s collections pernak-pernik digital yang menarik bagi engineers.

ACI (American Concrete Institute) •



ACI 351.3R-04 : Foundations for Dynamic Equipment, Reported by ACI Committee 351 This report presents to industry practitioners the various design criteria and methods and procedures of analysis, design, and construction applied to dynamic equipment foundations. (download *.RAR 636 kb) ACI 318-08 : Building Code Requirements for Structural Concrete and Commentary An ACI Standard, Reported by ACI Committee 318 (down-load PDF 16.463 Mb)

DOWNLOAD CIVIL/STRUCTURE CODE AND STANDARD

• • • • • • • • • • • • • • • • • • • • • • • • • • • •

Consultant & Independent Contractor Agreements 5th Edition (down-load 1536 kb) Welded MomFrame Conn Min Residual Stress oct 99.pdf (down-load 1137 kb) Modeling of Masonry Infill Panels for Structural Analysis (down-load 5959 kb) Management tools 2005 an executives guide (down-load 1213 kb) Remediation Engineering Design Concepts (down-load 2886 kb) Soil Dynamics (down-load 2914 kb) Zamil Steel Design Manual (down-load 40347 kb) Steel Structures-BS5950 down-load Civil Engineering Formulas Pocket Guide ( down-load ) The Aging Brain and How to Keep It Healthy ( down-load ) newnes-accelerated testing and validation Modelling passenger flows in public transport facilities.rar Structural analysis with finite elements.rar Architecture Ebook Architectural Structures.pdf Structural Steelwork Analysis and Design.rar Excavations and foundations in soft soils (down-load 16738 Kb). Mansory Designers Guide (down-load 30887 KB). Masonry Instant Answer (down-load 1893 KB) Geotechnical MODELING (down-load 6146 kb) CHOPRA’S dynamic of structure (down-load 22410 kb) ASTM (down-load 95672 kb) Bowles-Foundation Analysis and Design (down-load 52789 kb) Concrete Structures - BS 8110 (down-load 7204 kb) Bridge Engineering Substructure Design (down-load 6908 kb) Bridge Engineering (down-load 17176 kb) Building Construction, 5 volume by BARRY (down-load 52505 kb) MS Excel for RCC Design by Reinforced Concrete Council (down-load 6689 kb) STAAD foundation ( Part 1 : down-load 100 Mb) - (Part 2 : down-load 7 Mb) Petunjuk dari Sayeed tentang program ini yaitu :1. right click on setup.exe (which is in “stfnd_04.00.00.00_en” folder) file. 2. Click on properties menu. 3. Click on compatibility. 4. Check the box in “Run this program in compatibility mode for”

• • • • •



• • •







• •

5. Then from drop down choose approporiate operating system. 6. Now run setup. 7. Also do this for setup.exe file which is in “Bentley IEG License Service” folder. Book in taking decision efficiently (down-load 1119 kb) AASHTO CODE for Bridge (down-load 17180 kb) The Finite Element Method (down-load 6402 kb) The Finite Element Method practical course - muya (down-load 10189 kb) Etabs9 o Etab9.part1_crack.rar o Etab9.part2_crack.rar o Etab9.part3_crack.rar books of structural analysis o Tall Building Structures Analysis Design.rar o Structural and Stress Analysis.rar o Formulas for Stress Strain and Structural Matrices.rar o Engineering Analysis with ANSYS Software 1.rar o Advanced Stress and Stability Analysis.rar o Load bearing panels.pdf o Modern_experimental_stress_analysis_2004_.rar Foundation Engineering by Barja M. Das (down-load 9277 kb) books on project management http://rapidshare.com/files/97192863/The_little_black_book_of_project_management.rar Download Staad pro 2007 crack from here. o STAADPro-2007_Crack.part1.rar o STAADPro-2007_Crack.part2.rar o STAADPro-2007_Crack.part3.rar Download Sap10 from here: o Sap10_crack.part1.rar o Sap10_crack.part2.rar Download Code (ACI 318-99, ACI 318-05 & IBC 2006) o ACI-318-99 (down-load 11028 kb) o ACI -318R-05-Building code and Commentary (down-load 2378 kb) o 2006 IBC (down-load 18108 kb) two books on PUSHOVER analysis o Pushover_analysis.pdf o Evaluation of modal pushover analysis procedure using vertically regular and irregular generic The computer program given in floppy disk of Bowles soil mechanics. Download link is here: Bowles_computer_program_soil_mechanics.rar Column design software PCA col crack here: PCA_col_Ver3.64.rar

• • • •

• •

AISC manual of steel construction 3rd edition from here: Manual-of-Steel-Construction.pdf CSI safe (Crack) for slab design from here: CSI_SAFE_CRACK.rar If you are a consultant you should read this book. Download from here: click to down-load If you have Staad pro software but not crack then download crack for Staad pro 2004, 2005, 2006 & 2007 from here: click to down-load Buried Pipe Design 2nd Ed. (down-load) Geotechnical Earthquake Engineering.rar

1. The International Existing Building Code®, 2003 edition,

300 pages (down-load PDF 3.3 Mb) Internationally, code officials recognize the need for a modern, up-to-date code addressing repair, alteration, addition or change of occupancy in existing buildings. This code is designed to meet this need through model code regulations that safeguard the public health and safety in all communities, large and small. 2. ASCE 37-05: Design Load on Structures during Construction,

49 pages (down-load PDF 282 kb) The purpose of this standard is to provide minimum design load requiement during construction for building and other structures. This Standard addresses partially completed structures, and temporary structures used during construction. The load specified herein are suitable for use either with strength design (such USD and LRFD) or with allowable stress design (ASD) criteria. The loads are equally applicable to all conventional construction materials. 3. BUILDING CODE REQUIREMENTS for STRUCTURAL CONCRETE and

COMMENTARY (ACI 318M-05) 438 pages (down-load PDF 8.3 Mb) The code portion of this document covers the design and construction of structural concrete used in buildings and where applicable in nonbuilding structures. Among the subjects covered are: drawings and specifications; inspection; materials; durability requirements; concrete quality, mixing, and placing; formwork; embedded pipes; construction joints; reinforcement details; analysis and design; strength and serviceability; flexural and axial loads; shear and torsion; development and splices of reinforcement; slab systems; walls; footings; precast concrete; composite flexural members; prestressed concrete; shells and folded plate members; strength evaluation of existing structures; special provisions for seismic design; structural plain concrete; strut-

and-tie modeling in Appendix A; alternative design provisions in Appendix B; alternative load and strength-reduction factors in Appendix C; and anchoring to concrete in Appendix D. 4. Guidelines for the Use of Structural Precast Concrete in Building 2nd Ed.

Report of a Study Group of the New Zealand Concrete Society and New Zealand Society for Earthquake Engineering 152 pages, (down-load 8.3 Mb) 5. Analysis and Design of Reinforced Concrete Bridge Structures Reported by ACI-ASCE Committee 343 (ACI 343R-95) 158 pages (down-load PDF 7.5 Mb) These recommendations, reported by the joint ACI-ASCE Committee 343 on Concrete Bridge Design, provide currently acceptable guidelinesfor the analysis and design of reinforced, prestressed, and partially prestressed concrete bridges based on the state of the art at the rime of writing the report. The provisions recommended herein apply to pedestrian bridges, highway bridges, railroad bridges, airport taxiway bridges, and other special bridge structures. Recommendations for Transit Guideways are given in ACI 358R. The subjects covered in these recommendations are: common terms; general considerations; materials; construction: loads and load combinations; preliminary design: ultimate load analysis and strength design; service load analysis and design: prestressed concrete; superstructure systems and elements; substructure systems and elements; precast concrete: and details of reinforcement. The quality and testing of materials used in construction are covered by reference to the appropriate AASHTO and ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. 6. Design Recommendations for Precast Concrete Structures

Reported by ACI-ASCE Committee 550 ACI 550R-96 (Reapproved 2001) 8 pages (down-load PDF 137 kb) Recommendations for the design of precast concrete structures are presented. Design of individual members and of connections for the integration of members into structures are covered. Aspects of detailing, production, handling, erection, and strength evaluation that are related to design are also presented. Keywords: anchorage (structural); bearing elements; composite construction (concrete to precast concrete); concrete construction; connections (structural); erection; fabrication; joints (junctions); load tests (structural); precast concrete; reinforced concrete;

reinforcement; slabs; structural analysis; structural design; structural integrity; tolerances; volume changes; walls. 7. Emulating Cast-in-Place Detailing in Precast Concrete Structures

Reported by Joint ACI-ASCE Committee 550 ACI 550.1R-01 16 pages (down-load PDF 515 kb) This report provides engineers with a practical guide for detailing precast concrete structures that should meet building code requirements in all seismic regions by emulating cast-in-place reinforced concrete design. This report also provides information that shows how emulative precast concrete structures can address any or all of the provisions in accordance with ACI 318-99, including those of Chapter 21, if special attention is directed to detailing the joints and splices between precast components.Keywords: ductility; elastic design; emulation; flexural strength; joint; precast concrete; precast detailing; reinforcement. 8. Chemical Admixtures for Concrete

Reported by ACI Committee 212 ACI 212.3R-04 30 pages (down-load PDF 196 kb) This report updates the previous 1991 report. Chemical admixtures, which are primarily water-soluble substances, are discussed. Finely divided mineral admixtures are dealt with by ACI Committees 232, Fly Ash and Natural Pozzolans in Concrete, and 234, Silica Fume in Concrete. For the purpose of this report, chemical admixtures are classified into five groups: airentraining; accelerating; water-reducing and set-controlling; admixtures for flowing concrete; and miscellaneous. Admixtures possessing properties identifiable with more than one group are discussed with the group that describes its most important effect on concrete. Keywords: adhesives; admixture; air-entraining; alkali-aggregate reaction; bond; calcium chloride; concrete; corrosion inhibitor; flowing concrete; grouting; high-range water-reducing admixture; pigment; plasticizer; pumped concrete; retardon; waterreducing admixture. 9. Joints in Concrete Construction

ACI 224.3R-95 (Reapproved 2001) 44 pages (down load PDF 884 kb) This report reviews the state of the art in design, construction, and maintenance of joints in concrete structures subjected to a wide variety of use and environmental conditions. In

some cases, the option of eliminating joints is considered. Aspects of various joint sealant materials and jointing techniques are discussed. The reader is referred to ACI 504R for a more comprehensive treatment of sealant materials, and to ACI 224R for a broad discussion of the causes and control of cracking in concrete construction. Chapters in the report focus on various types of structures and structural elements with unique characteristics: buildings, bridges, slabs-on-grade, tunnel linings, canal linings, precast concrete pipe, liquid-retaining structures, walls, and mass concrete.Keywords: bridges, buildings, canals, canal linings, concrete construction, construction joints, contraction joints, design, environmental engineering concrete structures, isolation joints, joints, parking lots, pavements, runways, slabs-on-grade, tunnels, tunnel linings, walls. 10. Composite Structures of Steel and Concrete

Volume 1 : Beams, Slabs, Columns, and Frames for Buildings Second Editon, 228 pages (down-load 8.3 Mb) R.P. Johnson MA, FEng, FICE, FIStructE Profesor of Civil Engineering - University of Warwick Blackwell Sientific Publications - 1994 ISBN 0-632-02507-7This volume provides an introduction to the theory and design of composite structures of steel and concrete. Readers are assumed to be familiarwith the elastic and plastic theories for the analysis for bending and shear of cross-sections of beams and columns of a single material, such as structural steel, and to have some knowledge of reinfornced concrete.

Link AASHTO 2005 http://www.bestsharing.com/files/ms001122756/AASHTO%20LRFD%20Bridge %202005%20Full%20Edition-SI.pdf.html ACI SP66-04 Detailing Manual, http://www.4shared.com/file/19737507/5715e2a1/ACI_SP6604_DETAILING_MANUAL.html

Proposed … for Seismic Regulations for Precast Concrete Structures http://www.pci.org/pdf/publications/journal/2000/September-October/JL-00SEPTEMBER-OCTOBER-6.pdf Seismic Design and Construction of Precast Concrete Buildings in New Zealand http://www.pci.org/pdf/publications/journal/2002/September-October/JL-02SEPTEMBER-OCTOBER-2.pdf

Requirements for the Use of PRESSS Moment-Resisting Frame Systems https://www.pci.org/pdf/publications/journal/2004/March-April/JL-04-MARCH-APRIL5.pdf Ductile Connections in Precast Moment Resisting Frames http://www.pci.org/pdf/publications/journal/2006/May-June/JL-06-MAY-JUNE-5.pdf

ACI 117-90 Reapproved 2002 (download PDF 393 kb). ETABS TUTORIAL http://www.csiberkeley.com/Watch&Learn/DownLoad/ETABS/ComFloor_V9E.ZIP

British_Standards BS 5950-1 : 2000 Structural Use of Steelwork in Building Part 1 : Code of Practice for Design - Rolled and Welded Sections BS 8110 Structural Use of Concrete Part 1 : Code of Practice for Design and Construction (1997) Part 2 : Code of Practice for Special Circumstances (1985) Part 3 : Design Charts for Singley Reinforced Beams, Doubly Reinforced Beams and Rectangular Columns (1985) http://rapidshare.com/files/66491073/British_Standard.rar

Bridge Engineering:Construction and Maintenance (Principles and Applications in Engineering) http://rapidshare.com/files/17603426/Bridge_Engineering_Construction_and_Maintenance_0849 316847.rar ===================================================================== ============== Bridge Engineering : Substructure Design (Principles and Applications in Engineering) http://rapidshare.com/files/18371151/Bridge_Engineering_Substructure_Design_0849316812.rar ===================================================================== ============== Bridge Engineering : Seismic Design (Principles and Applications in Engineering) http://rapidshare.com/files/18472112/Bridge_Engineering_Seismic_Design_0849316839.rar ===================================================================== ============== AASHTO Standard Specification for Highway Bridges, 16th Ed http://rapidshare.com/files/48177306/GRSSHB.rar ===================================================================== ============== CONCRETE BRIDGE ENGINEERING: Performance and Advanced http://rapidshare.com/files/13273864/Concrete_Bridge_Engineering_Performance_and_Advance d.rar ===================================================================== ============== BRIDGE ENGINEERING http://w13.easy-share.com/1251983.html?F11 http://depositfiles.com/files/1099805 ===================================================================== ============== REINFORCED CONCRETE DEEP BEAMS http://rapidshare.com/files/11076575/Reinforced_Concrete_Deep_Beams__Prof._F.K.Kong.rar.html http://www.rapidshare.com/files/4320086/Reinforced_Concrete_Deep_Beams.rar http://mihd.net/z9ufog ===================================================================== ============== STRUCTURAL DETAILS in CONCRETE http://rapidshare.de/files/22577434/Bangash__Structural_Details_In_Concrete__Blackwell_Scientific_1992_.pdf ===================================================================== ==============

CONCRETE FORMWORK SYSTEMS http://rapidshare.com/files/10841109/Concrete_Formwork_Systems_0824700724.rar http://mihd.net/9auj70 ===================================================================== ============== STRENGTHENING of REINFORCED CONCRETE STRUCTURES http://www.rapidshare.com/files/4384913/Strengthening_of_Reinforced_Concrete_Structures.rar ===================================================================== ============== REPAIR, PROTECTION and WATERPROOFING of CONCRETE STRUCTURES, 3th Ed. http://rapidshare.com/files/11933404/Repair__Protection_and_waterproofing_of_concrete_struct ures.pdf http://www.file2upload.com/file/10017/ebc-repair–protection-and-waterproofing-of-concretestructures-isbn10-0419202803-pdf.html http://mihd.net/0mzqel ===================================================================== ============== PRACTICAL FOUNDATION ENGINEERING HANDBOOK, 2nd Ed http://www.rapidshare.com/files/10956077/Practical_Foundation_Engineering_Handbook.rar ===================================================================== ============== PILE DESIGN and CONSTRUCTION PRACTICE, 4th Ed http://rapidshare.com/files/32594371/Pile.Design.and.Construction.Practice-0419184503.rar ===================================================================== ============== FOUNDATION ANALYSIS and DESIGN, 5th Ed http://rapidshare.com/files/9780506/bowles_-_foundation_analysis_and_design.rar http://mihd.net/x5nsib ===================================================================== ============== COLD-FORMED STEEL DESIGN, 3rd Ed http://rapidshare.com/files/11574013/0471348090.rar http://mihd.net/02a3bh ===================================================================== ============== FINITE ELEMENT METHOD: A Practical Course http://rapidshare.com/files/2332110/TheFinElementMethodpracticalcourse_muya.rar http://www.4shared.com/file/8694599/e2f9a67d/TheFinElementMethodpracticalcourse_muya.ht ml ===================================================================== ============== STABILITY OF STRUCTURES: Elastic, Inelastic, Fracture, and Damage Theories http://mihd.net/hywe94

===================================================================== ============== STANDARD HANDBOOK for CIVIL ENGINEERS, 4th Ed http://www.rapidshare.com/files/18649908/standard_handbook_for_civil_engineers.rar http://rapidshare.com/files/18062809/standard_handbook_for_civil_engineers.rar ===================================================================== ============== HANDBOOK of CIVIL ENGINEERING CALCULATIONS http://www.rapidshare.com/files/9956411/Handbook_of_Civil_Engineering_Calculations_by_Hi cks__Tyler_Gregory_-_1999.rar http://www.rapidshare.com/files/15234963/Handbook_of_Civil_Engineering_Calculation.rar ===================================================================== ============== HANDBOOK of STRUCTURAL ENGINEERING, 2nd Ed http://rapidshare.com/files/9628592/handbook_of_structural_engineering.rar http://www.4shared.com/file/8704190/5a6007d1/handbook_of_structural_engineering.html http://www.ftp2share.com/file/13657/ctural_engineering.rar.html Jika memerlukan PASSWORD: ebooksclub ===================================================================== ============== STRUCTURAL ANALYSIS with FINITE ELEMENTS http://rapidshare.com/files/14583894/structural_analysis_with_finite_elements.pdf www.elektrotekno.com http://rapidshare.com/files/57113774/ASCE_Journal_of_Structural_Engineering_October_2007. rar ===================================================================== ============== ACI STRUCTURAL JOURNAL D. Ngo and A.C. Scordelis .(1967). “Finite Element Analysis of Reinforced Concrete Beams”, ACI Journal , March 1967 http://www.box.net/public/szj1pklj8g ===================================================================== ============== Peter Marti .(1985). “Basic Tools of Reinforced Concrete Beam Design”, ACI Journal, JanuaryFebruary 1985 http://www.box.net/public/l37ibquiar ===================================================================== ============== Frank J. Vecchio and Michael P. Collins.(1986). “The Modified Compression-Field Theory for Reinforced Concrete Element Subjected to Shear”, ACI Journal, March-April 1986 http://wiryanto.files.wordpress.com/2006/11/jp2.pdf ===================================================================== ==============

Julio A. Ramirez and John E. Breen .(1991). “Evaluation of a Modified Truss-Model Approach for Beams in Shear”, ACI Structural Journal, V.88, No.5, September-October 1991 http://www.box.net/public/usliq65a3y ===================================================================== ============== Michael P. Collins, Denis Mitchell, Perry Adebar and Frank J. Vecchio .(1996). “A General Shear Design Method”, ACI Structural Journal, January-February 1996 http://wiryanto.files.wordpress.com/2006/11/jp24.pdf ===================================================================== ============== Brian S. Maxwell and John E. Breen. (2000). “Experimental Evaluation of Strut-and-Tie Model Applied to Deep Beam with Opening”, ACI Structural Journal, V.97 No.1, Januari-Februari 2000 http://www.box.net/public/z4rfdzhi9t ===================================================================== ============== Federico A. Tavarez, Lawrence C. Bank, and Michael E. Plesha .(2003). “Analysis of FiberReinforced Polymer Composite Grid Reinforced Concrete Beams”, ACI Structural Journal, March-April 2003 http://wiryanto.files.wordpress.com/2006/11/tavarezbankpleshaacistructures2003.pdf ===================================================================== ============== Daniel Palermo and Frank J. Vecchio .(2003). “Compression Field Modeling of Reinforced Concrete Subjected to Reversed Loading: Formulation”, ACI Structural Journal, V. 100 / 5 http://wiryanto.files.wordpress.com/2006/11/100-s64.pdf ===================================================================== ============== Joel M. Barron and Mary Beth D. Hueste.(2004). “Diaphragm Effects in Rectangular Reinforced Concrete Buildings”, ACI Structural Journal, V. 101 / 5 http://wiryanto.files.wordpress.com/2006/11/acidiaphragm.pdf ===================================================================== ============== uan F. Correal, M. Saiid Saiidi, David Sanders, and Saad El-Azazy.(2007). “Shake Table Studies of Bridge Columns with Double Interlocking Spirals”, ACI Structural Journal V. 104 / 4 http://www.box.net/shared/g8slapk4i3 ===================================================================== ============== Khaldoun N. Rahal. (2007). “Combined Torsion and Bending in Reinforced and Prestressed Concrete Beams Using Simplified Method for Combined Stress-Resultants”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/je82fqtyaf ===================================================================== ============== P. Revathi and Devdas Menon.(2007). “Slenderness Effects in Reinforced Concrete Beams”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/ohojsz9fg1

===================================================================== ============== Keun-Hyeok Yang, Heon-Soo Chung, and Ashraf F. Ashour.(2007).”Influence of Shear Reinforcement on Reinforced Concrete Continuous Deep Beams”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/l3706of3ai ===================================================================== ============== Joseph Robert Yost, Shawn P. Gross, David W. Dinehart, and Jason J. Mildenberg.(2007). “Flexural Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Strips”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/vd2spmqec5 ===================================================================== ============== Kyoung-Kyu Choi, Mahmoud M. Reda Taha, and Alaa G. Sherif .(2007). “Simplified Punching Shear Design Method for Slab-Column Connections Using Fuzzy Learning”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/1jxdyyrvgn ===================================================================== ============== Mary Beth D. Hueste, JoAnn Browning, Andres Lepage, and John W. Wallace .(2007). “Seismic Design Criteria for Slab-Column Connections”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/r4ibkb631s ===================================================================== ============== Hung-Jen Lee and Jen-Wen Ko. (2007).”Eccentric Reinforced Concrete Beam-Column Connections Subjected to Cyclic Loading in Principal Directions”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/8l2xn6cj0u ===================================================================== ============== Alexandros G. Tsonos.(2007). “Cyclic Load Behavior of Reinforced Concrete Beam-Column Subassemblages of Modern Structures”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/0o02gth37k ===================================================================== ============== Nam Ho Lee, Kang Sik Kim, Chang Joon Bang, and Kwang Ryeon Park.(2007). “TensileHeaded Anchors with Large Diameter and Deep Embedment in Concrete”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/j6fmpbtxjg ===================================================================== ============== José R. Martí-Vargas, César A. Arbeláez, Pedro Serna-Ros, and Carmen Castro-Bugallo.(2007). “Reliability of Transfer Length Estimation from Strand End Slip”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/iljmpakgze

===================================================================== ============== Miguel Fernández Ruiz and Aurelio Muttoni.(2007). “On Development of Suitable Stress Fields for Structural Concrete”, ACI Structural Journal, V. 104 / 4 http://www.box.net/shared/augbzaxqdz ===================================================================== ============== Discussion by Himat Solanki: Shear Strength of Reinforced Concrete T-Beams without Transverse Reinforcement. Paper by A. Koray Tureyen, Tyler S. Wolf, and Robert J. Frosch (From the Sept.-Oct. 2006 ACI Structural Journal) http://www.box.net/shared/kjy1104f10 ===================================================================== ============== BULLETIN of THE NEW ZEALAND NSEE M.J. Nigel Priestley .(1993). “Myths and Fallacies in Earthquake Engineering - Conflict between Design and Reality”, Bulletin of The New Zealand National Society for Earthquake Engineering, Vol. 26, No.3 September 1993 http://www.box.net/public/15nx6nx0b2 ===================================================================== ============== CANADIAN JOURNAL of CIVIL ENGINEERING M.P. Collins, F.J. Vecchio and G. Mehlhorn .(1985). “An international competition to predict the response of reinforced concrete panels”, Can. J. Civ. Eng. 12: 624�644 http://www.box.net/public/gyr4m3orln ===================================================================== ============== F.J. Vecchio and S. Balopoulou .(1990). “On the nonlinear behaviour of reinforced concrete frames”, Can. J. Civ. Eng. 17: 698�704 http://wiryanto.files.wordpress.com/2006/11/jp12.pdf ===================================================================== ============== R.G. Selby and F.J. Vecchio .(1997). “A constitutive model for analysis of reinforced concrete solids”, Can. J. Civ. Eng. 24: 460�470 http://wiryanto.files.wordpress.com/2006/11/jp27.pdf ===================================================================== ============== D. Svecova and R.J. Eden .(2004). “Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars ― an experimental investigation”, Can. J. Civ. Eng. 31: 45�55 http://www.box.net/public/efgjx92km6 ===================================================================== ============== William Cavers and Gordon A. Fenton .(2004). “An evaluation of pile cap design methods in accordance with the Canadian design standard”, Can. J. Civ. Eng. 31: 109�119 http://wiryanto.files.wordpress.com/2006/11/l03-075.pdf

===================================================================== ============== Aftab A. Mufti, Baidar Bakht, Dagmar Svecova, and Vidyadhar Limaye .(2004). “Failure tests on full-scale models of grout laminated wood decks”, Can. J. Civ. Eng. 31: 133�145 http://wiryanto.files.wordpress.com/2006/11/l03-088.pdf ===================================================================== ============== Ricardo N.F. do Carmo and Sérgio M.R. Lopes .(2005). “Ductility and linear analysis with moment redistribution in reinforced high-strength concrete beams”, Can. J. Civ. Eng. 32: 194�203 http://wiryanto.files.wordpress.com/2006/11/l04-080.pdf ===================================================================== ============== Y.F. Li, S.H. Chen, K.C. Chang, and K.Y. Liu .(2005). “A constitutive model of concrete confined by steel reinforcements and steel jackets”, Can. J. Civ. Eng. 32: 279�288 http://wiryanto.files.wordpress.com/2006/11/l04-093.pdf ===================================================================== ============== COMPUTER and CONCRETE Frank J. Vecchio, Evan C. Bentz and Michael P. Collins .(2004). “Tools for forensic analysis of concrete structures”, Computers and Concrete, Vol. 1, No. 1 (2004) 1-14 http://wiryanto.files.wordpress.com/2006/11/cac0101001.pdf ===================================================================== ============== COMPUTER and STRUCTURES Lip H. Teh.(2004).”Beam element verification for 3D elastic steel frame analysis”, Computers and Structures 82 (2004) 1167�1179 http://www.box.net/public/7hbho3qk2g ===================================================================== ============== COMPOSITE STRUCTURES A.J.M. Ferreira, P.P. Camanho, A.T. Marques, A.A. Fernandes .(2001). “Modelling of concrete beams reinforced with FRP re-bars”, Composite Structures 53 (2001) 107-116 http://wiryanto.files.wordpress.com/2006/11/experimental-study-of-composite-structures.pdf ===================================================================== =============

CONCRETE INTERNATIONAL

D.M. Rogowsky and J.G. MacGregor .(1986). “Design of Reinforced Concrete Deep Beams Using the strut and tie model”, Concrete International, August 1986 http://www.box.net/public/kt5i92i4qt ===================================================================== ============= James K. Wight And Gustavo J. Parra-Montesinos . (2003). “Strut-and-Tie Model for Deep Beam Design: A practical exercise using Appendix A of the 2002 ACI Building Code”, Concrete International, May 2003 http://wiryanto.files.wordpress.com/2006/11/ci2505wight.pdf ===================================================================== ============= EARTHQUAKE ENGINEERING and ENGINEERING SEISMOLOGY Thomas Paulay .(1999). “A Simple Seismic Design Strategy Based on Displacement and Ductility Compatibility”, Earthquake Engineering and Engineering Seismology, Vol.1 No.1 http://wiryanto.files.wordpress.com/2006/11/ee0101-5.pdf ===================================================================== ============= C. H. Yeh and C. H. Loh .(2001). “Methodology of Seismic Hazard Analysis and Damage Assessment”, Earthquake Engineering and Engineering Seismology, Vol.3 No.1 http://www.box.net/public/xnyb696oic ===================================================================== ============= EARTHQUAKE ENGINEERING and STRUCTURAL DYNAMICS Sinan Akkar and Julian J. Bommer.(2007). “Prediction of elastic displacement response spectra in Europe and the Middle East”, Earthquake Engng Struct. Dyn. 2007; 36:1275�1301 http://www.box.net/shared/bsu3j90reh ===================================================================== ============= Chin-Hsiung Loh, Jerome P. Lynch, Kung-Chun Lu, Yang Wang, Chia-Ming Chang, Pei-Yang Lin and Ting-Hei Yeh.(2007). “Experimental verification of a wireless sensing and control system for structural control using MR dampers”, Earthquake Engng Struct. Dyn. 2007; 36:1303�1328 http://www.box.net/shared/xope67u9sf ===================================================================== ============= Songye Zhu and Yunfeng Zhang.(2007). “Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace”, Earthquake Engng Struct. Dyn. 2007; 36:1329�1346 http://www.box.net/shared/k7xuo3rizg ===================================================================== ============= R. Pinho, C. Casarotti and S. Antoniou.(2007). “A comparison of single-run pushover analysis techniques forseismic assessment of bridges”, Earthquake Engng Struct. Dyn. 2007; 36:1347�1362

http://www.box.net/shared/y3prl0ffq5 ===================================================================== ============= Manuel Navarro,Francisco Vidal, Takahisa Enomoto, Francisco J. Alcala, Antonio Garcia-Jerez, Francisco J. Sanchez and Norio Abeki.(2007). “Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)”, Earthquake Engng Struct. Dyn. 2007; 36:1363�1383 http://www.box.net/shared/7gxy9mvk4z ===================================================================== ============= M. R. Ghayamghamian, and G. R. Nouri.(2007). “On the characteristics of ground motion rotational components using Chiba dense array data”, Earthquake Engng Struct. Dyn. 2007; 36:1407�1429 http://www.box.net/shared/ls81864pe3 ===================================================================== ============= EARTHQUAKE SPECTRA Peter Fajfar .(2000). “A Nonlinear Analysis Method for Performance Based Seismic Design”, Earthquake Spectra, Vol.16 No.3 http://www.box.net/public/67kkzmp6pq ===================================================================== ============= Keith A. Porter,James L. Beck,and Rustem Shaikhutdinova .(2004). “Simplified Estimation of Economic Seismic Risk for Buildings”, Earthquake Spectra, Vol.20,No.4 http://www.box.net/public/r4r0aoqgjb ===================================================================== ============= ENGINEERING CONCRETE E. Montoya, F.J. Vecchio, S.A. Sheikh .(2004). “Numerical evaluation of the behaviour of steel and FRP-confined concrete columns using compression field modelling”, Engineering Structures 26(2004) 1535-1545 http://wiryanto.files.wordpress.com/2006/11/jp52.pdf ===================================================================== ============= ENGINEERING STRUCTURES Seung-Eock Kim, Kyung-Won Kang, Dong-Ho Lee .(2003). “Full-scale testing of space steel frame subjected to proportional loads”, Engineering Structures 25 (2003) 69�79 http://www.box.net/public/l59knmesqt ===================================================================== ============= H. Sezen, A.S. Whittaker, K.J. Elwood, K.M. Mosalam .(2003). “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey”, Engineering Structures 25 (2003) 103�114

http://www.box.net/public/mgu9o9anxb ===================================================================== ============= L. Cavaleri, N. Miraglia, M. Papia .(2003). “Pumice concrete for structural wall panels”, Engineering Structures 25 (2003) 115�125 http://www.box.net/public/6tt6397fhr ===================================================================== ============= John L. Wilson .(2003). “Earthquake response of tall reinforced concrete chimneys”,Engineering Structures 25 (2003) 11�24 http://www.box.net/public/nysv1ay78n ===================================================================== ============= M. Brun, J.M. Reynouard, L. Jezequel .(2003). “A simple shear wall model taking into account stiffness degradation”, Engineering Structures 25 (2003) 1�9 http://www.box.net/public/qqe5cjv9id ===================================================================== ============= ENGINEERING JOURNAL - AISC William A. Litle.(1966). “Small Scale Models for Steel Frameworks”, AISC Engineering Journal, July 1966 http://www.box.net/shared/jsk78idohq ===================================================================== ============= W.H. Munse .(1967). “High-Strength Bolting”, AISC Engineering Journal, January 1967 http://wiryanto.files.wordpress.com/2006/11/04_1_018.PDF ===================================================================== ============= A. Lally and W. A. Milek, JR..(1969). “Bridge Construction Details”, AISC Engineering Journal, January 1969 http://www.box.net/public/710m4vupjs ===================================================================== ============= Allen E. Wehrmeister.(1969). “Use of Ultrasonic Testing in the Structural Steel Industry”, AISC Engineering Journal, April 1969 http://www.box.net/public/cs2qne7249 ===================================================================== ============= R. H. R. Tide And T. V. Galambos .(1970). “Composite Open-Web Steel Joists”, AISC Engineering Journal, January 1970 http://www.box.net/public/vr0tv26fm0 ===================================================================== ============= Fazlur R. Khan and Anthony F. Nassetta.(1970).”Temperature Effects on Tall Steel Framed

Buildings - Part 3―Design Considerations”, AISC Engineering Journal,October 1970 http://www.box.net/public/dhkjchygk5 ===================================================================== ============= John H. A. Struik, Abayomi O. Oyeledun and John W. Fisher. (1973). “Bolt Tension Control with a Direct Tension Indicator”, AISC Engineering Journal, First Quarter 1973 http://www.box.net/shared/spvest96ie ===================================================================== ============= T.V. Galambos .(1978). “Load Factor Design of Steel Buildings”, AISC Engineering Journal, July 1978 http://wiryanto.files.wordpress.com/2006/11/09_3_108.pdf ===================================================================== ============= S.T. Rolfe .(1977). “Fracture and Fatigue Control in Steel Structures”, AISC Engineering Journal, First Quarter http://wiryanto.files.wordpress.com/2006/11/14_1_002.PDF ===================================================================== ============= N. Krishnamurthy .(1978). “A Fresh Look at Bolted End-Plated Behavior and Design”, Engineering Journal, Second Quarter http://wiryanto.files.wordpress.com/2006/11/15_2_039.PDF ===================================================================== ============= John D. Griffiths .(1984). “End-Plate Moment Connections - Their Use and Misuse”, Engineering Journal, First Quarter http://wiryanto.files.wordpress.com/2006/11/21_1_032.PDF ===================================================================== ============= Michael P. Cohen .(1986). “Design Solutions Utilizing the Staggered-steel Truss System”, Engineering Journal, Third Quarter http://wiryanto.files.wordpress.com/2006/11/265_ej_cohen.pdf ===================================================================== ============= Lambert Tall .(1989). “The Reinforcement of Steel Columns”, Engineering Journal, First Quarter 1989 http://www.box.net/public/i6lpmre60n ===================================================================== ============= Mark A. Bradford .(1991). “Buckling of Prestressed Steel Girders”, Engineering Journal, Third Quarter 1991 http://www.box.net/public/a2qbaen4js ===================================================================== ============= Patrick D. Zuraski .(1992). “The Significance and Application of Cb in Beam Design”, Engineering Journal, First Quarter

http://wiryanto.files.wordpress.com/2006/11/the-significance-and-application-ofcb-inbeamdesign.pdf ===================================================================== ============= W. McGuire .(1992). “Computers and Steel Design”, Engineering Journal, Fourth Quarter http://wiryanto.files.wordpress.com/2006/11/computer-and-steel-design-wmc-guire.pdf ===================================================================== ============= Engineering Journal Vol. 29 tahun 1992 http://wiryanto.wordpress.com/2006/12/14/engineering-journal-vol29-th-1992-lengkap-gratis/ ===================================================================== ============= Engineering Journal Vol. 30 tahun 1993 http://wiryanto.wordpress.com/2006/12/13/aisc-journal-bundel-1993-gratis/ ===================================================================== ============= JOURNAL of THE CONSTRUCTION DIVISION Boyd C. Paulson, Jr. (1976). “Goal for Education and Research in Construction”, Journal of Construction Division, September 1976 http://wiryanto.files.wordpress.com/2006/11/paulsonjcem.pdf ===================================================================== ============= JOURNAL of CONSTRUCTIONAL STEEL RESEARCH A.M Citipitioglu, R.M. Haj-Ali, D.W. White .(2002). “Refined 3D finite element modeling of partially restrained connections including slip”, Journal of Constructional Steel Research 58 (2002) 995-1013 http://wiryanto.files.wordpress.com/2006/11/steel_connection_jcsr_1.pdf ===================================================================== ============= JOURNAL of PERFORMANCE OF CONSTRUCTED FACILITIES - ASCE F.J. Vecchio .(2002). “Contribution of Nonlinear Finite-Element Analysis to Evaluation of Two Structural Concrete Failures”, Journal of Performance of Constructed Facilities, Vol. 16 No.3, August 1, 2002 http://wiryanto.files.wordpress.com/2006/11/jp44.pdf ===================================================================== ============= Frederick R. Rutz, and Kevin L. Rens.(2007).”Wind Loads for 19th Century Bridges: Design Evolution, Historic Failures, and Modern Preservation”, Journal of Performance of Constructed Facilities, Vol. 21 No.2, April 1, 2007 http://www.box.net/shared/r1vhakn3g0 ===================================================================== ============= JOURNAL of MATERIALS IN CIVIL ENGINEERING

Chee Kiong Soh, Yu Liu, Yue Xing Dong and Xin Zheng Lu .(2003). “Damage Model Based Reinforced-Concrete Element”, Journal of Materials in Civil Engineering, Vol. 15, No.4, August 1, 2003 http://wiryanto.files.wordpress.com/2006/11/28.pdf ===================================================================== ============= JOURNAL of ENGINEERING MECHANICS - ASCE F. J. Vecchio and A. DeRoo .(1995). “Smeared-Crack Modeling of Concrete Tension Splitting”, Journal of Engineering Mechanics, Vol. 121 / 6 http://wiryanto.files.wordpress.com/2006/11/jp23.pdf ===================================================================== ============= In-Won Lee, Hyung-Jo Jung, Man-Cheol Kim, and Arthur R. Robinson .(1999). “Eigensolution Method for Structures with Multiple or Close Eigenvalues”, Journal of Engineering Mechanics, Vol.125/ 11 http://www.box.net/public/nfzrjm19kg ===================================================================== ============= M. A. Bradford, B. Uy, Y. L. Pi. (2002). “In-plane Elastic Stability of Arches Under a Centra Concentrated Load”, Journal of Engineering Mechanics,Vol.128 / 7 http://www.box.net/shared/8cps3lghk0 ===================================================================== ============= Ferhun C. Caner; and Zdenek P. Bazant .(2002).”Lateral Confinement Needed to Suppress Softening of Concrete in Compression”, Journal of Engineering Mechanics, Vol.128 / 12 http://www.box.net/public/qjpjiumo2h ===================================================================== ============= Lip H. Teh.(2005).”Spatial Rotation Kinematics and Flexural�Torsional Buckling”, Journal of Engineering Mechanics, Vol. 131 / 6 http://www.box.net/public/g6joy313jz ===================================================================== ============== JOURNAL of STRUCTURAL ENGINEERING - ASCE Virote Boonyapinyo, Hitoshi Yamada and Toshio Miyata.(1994).”Wind-induced Nonlinear Lateral-Torsional Buckling of Cable-Stayed Bridges, Journal of Structural Engineering Vol.120/2 http://www.box.net/shared/m0epy3y8rq ===================================================================== ============== Abolghasem Saneinejad and Brian Hoobs .(1995). “Inelastic Design of Infilled Frames”, Journal of Structural Engineering, Vol.121/4 http://www.box.net/public/xqup9h3skn =====================================================================

============== M.S Pfeil and R.C. Batista.(1995). “Aerodynamic Stability Analysis of Cable-Stayed Bridges”, Journal of Structural Engineering, Vol.121/12 http://www.box.net/shared/pcx5rr3o6o ===================================================================== ============== Madan, A., Reinhorn, A.M., Mander, J.B., and Valles, R.E. (1997). “Modeling of Masonry Infill Panels for Structural Analysis”, Journal of Structural Engineering Vol.123/10 http://www.box.net/shared/dxhv81mg3n ===================================================================== ============== Muhammad N. S. Hadi and Yoyong Arfiadi.(1998). “Optimum Desing of Absorber for MDOF Structures, Journal of Structural Engineering, Vol. 124/11 http://www.box.net/shared/555ufxtpnh ===================================================================== ============== Balaur S. Dhillon, James W. O’Malley III .(1999). “Interactive Design of Semirigid Steel Frames”, Journal of Structural Engineering, May 1999 http://www.box.net/public/ei38m4o2qx ===================================================================== ============== M.A. Polak and F.J. Vecchio .(1993). “Nonlinear Analysis of Reinforced-Concrete Shells”, Journal of Structural Engineering, Vol.119 / 12 http://wiryanto.files.wordpress.com/2006/11/jp19.pdf ===================================================================== ============== Joseph M. Bracci, Sashi K. Kunnath and Andrei M. Reinhorn .(1997). “Seismic Performance and Retrofit Evaluation of Reinforced Concrete Structures”, Journal of Structural Enginering, Vol. 123 / 1 http://wiryanto.files.wordpress.com/2006/11/kunnath-and-reinhorn.pdf ===================================================================== ============== Suchart Limkatanyu and Enrico Spacone .(2002). “Reinforced Concrete Frame Element with Bond Interfaces II: State Determinations and Numerical Validation”, Journal of Structural Engineering, Vol. 128 / 3 http://wiryanto.files.wordpress.com/2006/11/spaconelimkatanyuasce-st-3-2002b.pdf ===================================================================== ============== Qing Quan Liang, Brian Uy, and Grant P. Steven . (2002). “Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete”, Journal of Structural Engineering, Vol.128 / 6 http://www.box.net/shared/yh6dda6n05 ===================================================================== ============== Mettupalayam V. Sivaselvan and Andrei M. Reinhorn .(2002). “Collapse Analysis: Large Inelastic Deformations Analysis of Planar Frames”, Journal of StructuralEngineering, Vol. 128 / 12

http://wiryanto.files.wordpress.com/2006/11/sivaselvan-and-reinhorn_large.pdf ===================================================================== ============== F.J. Vecchio and W. Shim .(2004). “Experimental and Analytical Re-examination of Classic Concrete Beam Tests”, Journal of Structrual Engineering, Vol. 130 / 3 http://wiryanto.files.wordpress.com/2006/11/jp49.pdf ===================================================================== ============== Jianguo Nie, Jiansheng Fan and C. S. Cai . (2004). “Stiffness and Deflection of Steel�Concrete Composite Beams under Negative Bending”, Journal of Structural Engineering, Vol. 130 / 11 http://wiryanto.files.wordpress.com/2006/11/j2004-stiffness-and-deflection-of-steel-concretecomposite-beams-under-negative-bending.pdf ===================================================================== ============== Dimitrios Vamvatsikos and C. Allin Cornell . (2005). “Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation”, Journal of Structural Engineering, Vol. 131 / 4 http://wiryanto.files.wordpress.com/2006/11/demand_and_capacity_through_spo2ida.pdf ===================================================================== ============== Tadeh Zirakian and Hossein Showkati. (2007). “Experiments on Distortional Buckling of IBeams”, Journal of Structural Engineering, Vol. 133 / 7 http://www.box.net/shared/hq52ypo82v ===================================================================== ============== Vu Phan, M. Saiid Saiidi, John Anderson and Hamid Ghasemi.(2007). “Near-Fault Ground Motion Effects on Reinforced Concrete Bridge Columns”, Journal of Structural Engineering, Vol. 133, No. 7 http://www.box.net/shared/dgkpbe93ry ===================================================================== ============== Murat Dicleli and Anshu Mehta.(2007). “Efficient Energy Dissipating Steel-Braced Frame to Resist Seismic Loads”, Journal of Structural Engineering, Vol. 133, No. 7 http://www.box.net/shared/8h2gt5lpxb ===================================================================== ============== Feng Zhou, Khalid M. Mosalam and Masayoshi Nakashima.(2007). “Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic Loading”, Journal of Structural Engineering, Vol. 133, No. 7 http://www.box.net/shared/98×4thafes ===================================================================== ============== K. A. Riederer and T. Haukaas.(2007). “Cost-Benefit Importance Vectors for PerformanceBased Structural Engineering”, Journal of Structural Engineering, Vol. 133, No. 7 http://www.box.net/shared/48m7r9rh3c =====================================================================

============== JOURNAL of BRIDGE ENGINEERING - ASCE Uwe Starossek.(1996).”Cable-Stayed Bridge Concept for Longer Spans”, Journal of Bridge Engineering, Vol.1, No.3 http://www.box.net/public/vo3b9v8lo8 ===================================================================== ============== Sami W. Tabsh and Kalpana Sahajwani .(1997). “Approximate Analysis of Irregular Slab-onGirder Bridges”, Journal of Bridge Engineering,Vol. 2 / 1 http://wiryanto.files.wordpress.com/2006/11/approximate-analysis-of-irregular-slab-on-girderbridges.pdf ===================================================================== ============== Mounir E. Mabsout, Kassim M. Tarhini, Gerald R. Frederick and Charbel Tayar .(1997). “FiniteElement Analysis of Steel Girder Highway Bridges”, Journal of Bridge Engineering,Vol. 2 / 3 http://wiryanto.files.wordpress.com/2006/11/finite-element-analysis-of-steel-girder-highwaybridges.pdf ===================================================================== ============== Eric M. Hines, David P. Billingtion .(1998). “Case Study of Bridge Design Competition”, Journal of Bridge Engineering, Vol.3, No.3 http://www.box.net/public/8dgtzy19e3 ===================================================================== ============== A. Zureick and R. Naqib .(1999). “Horizontally Curved Steel I Girders State of The Art Analysis Methods”, Journal of Bridge Engineering, Vol. 4 / 1 http://wiryanto.files.wordpress.com/2006/11/horizontally-curved-steel-i-girders-state-of-the-artanalys.pdf ===================================================================== ============== Constantine C. Spyrakos, Emory L. Kemp,and Ramesh Venkatareddy.(1999).”Validated Analysis Of Wheeling Suspension Bridge”, Journal of Bridge Engineering, Vol.4, No.1 http://www.box.net/public/s23oqre2tn ===================================================================== ============== Marco Rosignoli .(1999). “Prestressing Schemes For Incrementally Launched Bridges”, Journal of Bridge Engineering, Vol.4, No.2 http://www.box.net/public/lgoyrmdfmr ===================================================================== ============== Toorak Zokaie .(2000). “AASHTO-LRFD Live Load Distribution Specification”, Journal of Bridges Engineering,Vol. 5 / 2 http://wiryanto.files.wordpress.com/2006/11/aashto-lrfd-live-load-distribution-specifications.pdf ===================================================================== ==============

K. E. Barth and D. W. White .(2000).”Inelastic Design of Steel I-Girder Bridges”, Journal of Bridge Engineering, Vol. 5 / 3 http://wiryanto.files.wordpress.com/2006/11/inelastic-design-of-steel-i-girder-bridges.pdf ===================================================================== ============== Brett A. McElwain and Jeffrey A. Laman .(2000). “Experimental Verification of Horizontally Curved I-Girder Bridge Behavior”, Journal of Bridge Engineering, Vol. 5, No. 4 http://wiryanto.files.wordpress.com/2006/11/experimental-verification-of-horizontally-curved-igirder-b.pdf ===================================================================== ============== Sami W. Tabsh and Muna Tabatabai.(2001).”Live Load Distribution In Girder Bridges Subject To Oversized Trucks”, Journal of Bridge Engineering, Vol.6, No.1 http://www.box.net/public/898bhcge0i ===================================================================== ============== Hung-Shan Shu and Yang-Cheng Wang.(2001).”Stability Analysis Of Box-Girder Cable-Stayed Bridges”, Journal of Bridge Engineering, Vol.6, No.1 http://www.box.net/public/deqyn31017 ===================================================================== ============== Q. W. Zhang, T. Y. P. Chang, and C. C. Chang .(2001). “Finite-Element Model Updating for The Kap Shui Mun Cable-Stayed Bridge”, Journal of Bridge Engineering, Vol. 6 / 4 http://wiryanto.files.wordpress.com/2006/11/finite-element-model-updating-for-the-kap-shuimun-cable-st.pdf ===================================================================== ============== Gregor P. Wollmann.(2001).”Preliminary Analysis of Suspension Bridges”, Journal of Bridge Engineering, Vol.6, No.4 http://www.box.net/public/nspjt7ytgr ===================================================================== ============== M. Schlaich .(2001). “Erection of Cable-Stayed Bridges Having Composite Decks With Precast Concrete Slabs”, Journal of Bridge Engineering, Vol. 6 / 5 http://wiryanto.files.wordpress.com/2006/11/erection-of-cable-stayed-bridges-having-compositedecks-wit.pdf ===================================================================== ============== Bruce A. Moulds .(2001). “Design Considerations for Aircraft Bridges”, Journal of Bridge Engineering, Vol. 6 / 6 http://wiryanto.files.wordpress.com/2006/11/design-considerations-for-aircraft-bridges.pdf ===================================================================== ============== Junsik Eom and Andrzej S. Nowak .(2001).”Live Load Distribution For Steel Girder Bridges”, Journal of Bridge Engineering, Vol.6, No.6 http://www.box.net/public/vvjn74e6pj

===================================================================== ============== Zhong Liu, Fang Li, and W. M. Kim Roddis .(2002).”Analytic Model of Long-Span Self-Shored Arch Bridge”,Journal of Bridge Engineering, Vol.7, No.1 http://www.box.net/public/a1jy233xi4 ===================================================================== ============== Khaled M. Sennah, and John B. Kennedy .(2002).”Literature Review in Analysis of Box-Girder Bridges”,Journal of Bridge Engineering, Vol.7, No.2 http://www.box.net/public/89cpe23fb4 ===================================================================== ============== Ahmad M. Itani, Michael Bruneau, Lyle Carden and Ian G. Buckle .(2004). “Seismic Behavior of Steel Girder Bridge Superstructures”, Journal of Bridges Engineering,Vol. 9 / 3 http://wiryanto.files.wordpress.com/2006/11/asce-2004-itani-bruneau-carden-buckle.pdf ===================================================================== ============== JOURNAL of ADVANCED CONCRETE TECHNOLOGY Hajime Okamura and Masahiro Ouchi .(2003). “Self-Compacting Concrete”, Journal of Advanced Concrete Technology, Vol.1 No.1 http://wiryanto.files.wordpress.com/2006/11/1_5.pdf ===================================================================== ============== Shunsuke Otani .(2004). “Earthquake Resistant Design of Reinforced Concrete Buildings - Past and Future”, Invited Paper, Journal of Advanced Concrete Technology Vol.2 No.1 http://wiryanto.files.wordpress.com/2006/11/003-024.pdf ===================================================================== ============== Kiang Hwee Tan . (2004). “Design of Non-Prismatic RC Beams Using Strut-and-Tie Models”, Journal of Advanced Concrete Technology, Vol. 2 No.2 http://wiryanto.files.wordpress.com/2006/11/design-of-non-prismatic-rc-beams-using-strut-andtie-models.pdf ===================================================================== ============== Tomohiro Miki and Junichiro Niwa . (2004). “Nonlinear Analysis of RC Structural Members Using 3D Lattice Model”, Journal of Advanced Concrete Technology, Vol. 2 No.3 http://www.box.net/shared/n113yeoz6c ===================================================================== ============== JOURNAL of STRUCTURAL ENGINEERING SOCIETY NEW ZEALAND John Butterworth .(2000). “Ductile Concentrically Braced Frames using Slotted Bolted Joints”, SESOC Journal Vol. 13 No.1 April 2000 http://wiryanto.files.wordpress.com/2006/11/xbracesesoc.pdf =====================================================================

============== JOURNAL of WIND ENGINEERING and INDUSTRIAL AERODYNAMICS Toshio Miyata.(2003).”Historical view of long-span bridge aerodynamics”,Journal of Wind Engineering and Industrial Aerodynamics 91 (2003) 1393�1410 http://www.box.net/shared/8×7s6de1ph ===================================================================== ============== MODERN of STEEL CONSTRUCTIONS Kenneth J. Wright and Matthew A. Bunner .(1997). “High Strength Steel Reduces Truss Costs: A new bridge across the Chelyan River in West Virginia utilized Gr.36, 50 and 70 steels”, Modern Steel Construction / October 1997 http://www.box.net/public/h4294od0tv ===================================================================== ============== Steven A. Weinhold, P.E. .(1997). “Erection Engineering For Steel Bridge Superstructures”, Modern Steel Construction / October 1997 http://www.box.net/public/m3036qate1 ===================================================================== ============== Michael E. Trunko .(1997). “Galvanizing Eliminates Repainting On Bridges : A turn-key operation specializes in designing, fabricating and erecting galvanized truss bridges, Modern Steel Construction / October 1997 http://www.box.net/public/3oai51ybfg ===================================================================== ============== Lawrence G. Griffis .(2006). A Culture of Discipline: Structural engineers must approach their work with diligence and a great sense of responsibility to themselves, their firms, and society”, Modern Steel Construction / December 2006 http://www.box.net/public/dmf1vitcoa ===================================================================== ============== PCI JOURNAL M.J. Nigel Priestley, S. (Sri) Sritharan, James R. Conley, Stefano Pampanin. (1999). “Preliminary Results and Conclusions From the PRESSS Five-Story Precast Concrete Test Building”, PCI JOURNAL November-December 1999 http://www.box.net/shared/5lui147f57 ===================================================================== ============== Sidney Freedman .(1999). “Loadbearing Architectural Precast Concrete Wall Panels”, PCI JOURNAL September-October 1999 http://www.box.net/shared/tcp0tfz2g2 =====================================================================

============== ROYAL ACADEMY of ENGINEERING Tony Fitzpatrick.(1991). “Linking London: The Millennium Bridge”,The Royal Academy of Engineering, Westminster, London, June 2001 http://www.box.net/shared/6y28sckm0j ===================================================================== ============== STRUCTURAL CONCRETE F. J. Vecchio .(2001). “Non-linear finite element analysis of reinforced concrete: at the crossroads ?”, Structural Concrete 2001 Vol.2 No. 4 http://wiryanto.files.wordpress.com/2006/11/jp40.pdf ===================================================================== ============== Stefano Pampanin .(2003). “Alternative design philosophies and seismic response of precast concrete buildings”, Structural Concrete 2003 Vol.4 No.4 . The author is one of the winners of the fib 2003 diplomas to younger engineers in the Research category http://eacef.files.wordpress.com/2007/08/fib_news_dec03.pdf ===================================================================== ============== E. Caetano and A. Cunha.(2004). “Experimental and numerical assessment of the dynamic behaviour of a stress-ribbon footbridge”, Structural Concrete 2004 Vol.5,No.1 http://www.box.net/public/g4z5ev27a3 ===================================================================== ============== C. G. Papanicolaou and T. C. Triantafillou .(2004). “Analysis and minimum cost design of concrete sandwich panels under out-of-plane loading”, Structural Concrete 2004 Vol.5,No 1 http://www.box.net/public/tujqzyff91 ===================================================================== ============== STRUCTURAL ENGINEERING INTERNATIONAL Michel Virlogeux, Claude Servant, Jean-Marie Cremer,Jean-Pierre Martin, Marc Buonomo. (2005). “Millau Viaduct, France”, Structural Engineering International 1/2005 http://www.box.net/public/ossgffjhs8 ===================================================================== ============== Federico M. Mazzolani.(2006). “Structural Applications of Aluminium in Civil Engineering”, Structural Engineering International 4/2006 http://www.box.net/public/hn2a844l2f ===================================================================== ============== THIN-WALLED STRUCTURES - ELSEVIER

K.F. Chung *, K.H. Ip.(2000).”Finite element modeling of bolted connections between coldformed steel strips and hot rolled steel plates under static shear loading”, Engineering Structures 22 (2000) 1271�1284 http://www.box.net/shared/iedn6jdo16 ===================================================================== ============== H.C. Ho, K.F. Chung .(2006). “Analytical prediction on deformation characteristics of lapped connections between cold-formed steel Z sections”, Thin-Walled Structures 44 (2006) 115-130 http://wiryanto.files.wordpress.com/2006/11/analytical-prediction-on-deformationcharacteristics-of-lapped-connections-between-cold-formed-steel-z-sections.pdf ===================================================================== ============== Tae Soo Kima, Hitoshi Kuwamura. (2007). “Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear”, Thin-Walled Structures 45 (2007) 407�421 http://www.box.net/shared/myf7cs079n ===================================================================== ============== “Analisa Inelastis Portal - Dinding Pengisi dengan Equivalent Diagonal Strut”, Jurnal Teknik Sipil - ITB, Edisi Vol. 12 / 4, Oktober 05, Institut Teknologi Bandung, Bandung (down-load PDF 358 kb) http://sipil-uph.tripod.com/jurnal_itb.pdf ===================================================================== ============== “Proyek Tangki Air dari Semen-Pasir-Bambu di Mesjid Al-Ikhlas, Binong ,Tangerang”, Jurnal Teknik Sipil - UPH, Vol.2 No.1 Januari 2005, Universitas Pelita Harapan, Banten. (down-load PDF 324 kb) http://sipil-uph.tripod.com/jurnal_tangki_air.pdf ===================================================================== ============== “Perancangan Balok Beton Bertulang dengan SAP2000″, Jurnal Teknik Sipil - UPH, Vol.1 No.2 Juli 2005, Universitas Pelita Harapan, Banten. (down-load PDF 323 kb) http://sipil-uph.tripod.com/desain_dng_sap2000.pdf ===================================================================== ============== “Lebih Dekat dengan Kampus Uni-Stuttgart di Kota Asal Mercedes Benz”, Majalah PELITA HARAPAN , Volume III/1, Jan.-Maret 04. (read …. or down-load PDF 184 kb) http://sipil-uph.tripod.com/ttg_stuttgart.pdf ===================================================================== ============== “STRUKTUR JEMBATAN TERINGAN dan TERKUAT (TERKOKOH) - Studi kasus : Jembatan Model UPH pada KJBI 2005 dan KJI 2006″, seminar “Research and Education in Engineering for Prospected Technology - National Conference on Prospected Technology 2007 (NCPT 2007)”, Universitas Maranatha, 24-25 Agustus 2007, Bandung (down-load paper 199 kb) http://www.box.net/shared/2zzxqsc1og ===================================================================== ==============

“Metode s.t.m untuk Perencanaan Struktur Transfer-Wall Proyek ‘Kota Kasablanka’ Jakarta”, seminar “The 2nd National Civil Engineering Conference”. Jurusan Teknik Sipil, Fakultas Teknik, Unika Soegijapranata, Semarang, 20 � 21 Desember 2006 (down-load paper PDF 160 kb) http://www.box.net/shared/yelpbgyujc ===================================================================== ============== “Ilmu Rekayasa Klasik Sarana Menguasai Program Aplikasi Rekayasa - Studi Kasus: Mekanika Teknik Klasik dan Program SAP2000″, Pembicara Utama dalam Seminar di Pameran Buku Konstruksi Indonesia 2006, R. Sapta Taruna, Gd. Utama Departemen Pekerjaan Umum, Jl. Pattimura 20, Sabtu, 2 Desember 2006 (down-load paper PDF 883 kb dan presentasi 1,620 kb) http://www.box.net/public/l28myclfm8 http://www.box.net/public/kmouyrnuj4 ===================================================================== ============== “Evaluasi Metode Perencanaan Batang Aksial Murni SNI-03-1729-2000 dan AISC-LRFD”, Civil Engineering Conference: Toward Sustainable Civil Engineering Practice , Surabaya, 25-26 Agustus 2006, Universitas Kristen PETRA (down-load PDF) http://www.petra.ac.id/kts06/papers/17-KTS-SE-15.pdf ===================================================================== ============== “Strategi Analisis Struktur dengan Kabel Prategang memakai SAP2000″, Civil Engineering Conference: Toward Sustainable Civil Engineering Practice, Surabaya, 25-26 Agustus 2006, Universitas Kriten PETRA (down-load PDF) http://www.petra.ac.id/kts06/papers/15-KTS-SE-13.pdf ===================================================================== ============== “Perlunya Pembelajaran Baja Cold-Formed dalam Kurikulum Konstruksi Baja di Indonesia” , prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, Jurusan Teknik Sipil, FT Universitas Udayana, Bukit, Jimbaran, Bali (down-load PDF 619 kb) http://www.box.net/public/f72kq0d75a ===================================================================== ============== “Pemrograman sebagai Sarana Pembelajaran Rekayasa”, prosiding Lokakarya Pengajaran Mekanika Teknik, Konstruksi Beton dan Konstruksi Baja, Jurusan Teknik Sipil, FT Universitas Udayana, Bukit, Jimbaran, Bali (down-load PDF 398 kb) http://www.box.net/shared/a1has697yh ===================================================================== ============== Simulasi Numerik Berbasis Komputer sebagai Solusi Pencegah Bahaya akibat Kegagalan Bangunan”, Presentation and Proceeding at the Seminar Nasional Kegagalan Bangunan, Solusi dan Pencegahannya, Jurusan Teknik Sipil, Universitas Pelita Harapan, Lippo Karawaci, Rabu 3 Mei 2006 (down-load PDF 771 kb) http://sipil-uph.tripod.com/wir_kegagalan_bangunan.pdf ===================================================================== ==============

“Strategi Penyelesaian Numerik Berbasis Komputer Analisis Lentur Ultimate Penampang Beton (Model Tegangan Parabolik PCA)”, Presentation and Proceeding at the Seminar Nasional Teknologi II, Universitas Teknologi Yogyakarta, 10 December 2005 (down-load PDF 280 kb) http://sipil-uph.tripod.com/wiryanto_di_uty.pdf ===================================================================== ============== “Masih perlukah mempelajari Mekanika Teknik Klasik dalam Era Serba Komputer ?”, Presentation and Proceeding at the Lokakarya Pengajaran Konstruksi Beton dan Mekanika Teknik, Jurusan Teknik Sipil, Institut Teknologi Sepuluh Nopember (ITS) Surabaya, 13-14 July 2005. (down-load PDF 180 kb) http://sipil-uph.tripod.com/wiryanto_di_its.pdf ===================================================================== ============== “Evaluasi Kinerja Struktur Baja Tahan Gempa dengan Analisa Pushover”, Presentation and Proceeding at the Civil Engineering National Conference Sustainability Construction & Structural Engineering Based on Professionalism, Unika Soegijapranata, Semarang, 17-18 Juni 2005 (down-load PDF 784 kb) http://sipil-uph.tripod.com/wiryanto_di_soegijapranata.pdf ===================================================================== ============== “Simulasi Keruntuhan Balok Beton Bertulang Tanpa Sengkang dengan ADINA TM”, Proceeding at the Seminar Nasional Rekayasa Material dan Konstruksi Beton 2005, Jurusan Teknik Sipil � ITENAS, Bandung, Sabtu, 4 June 05. (down-load PDF 453 kb) http://sipil-uph.tripod.com/wiryanto_di_itenas.pdf ===================================================================== ============== Steel Handbook ISBN: 0070087822 Title: Structural Steel Designer’s Handbook, 3rd edition, 1999-11 Author: Roger L Brockenbrough, Frederick S. Merritt Publisher: McGraw-Hill Professional Publication Date: 1999-11-11 Number Of Pages: 1208 Section 1. Properties of Structural Steels and Effects of Steelmaking and Fabrication Roger L. Brockenbrough, P.E. (PDF 299 kb) http://www.box.net/public/pp7smbb2v0 Section 2. Fabrication and Erection Thomas Schflaly (PDF 214 kb) http://www.box.net/public/a973×4d6hb Section 3. General Structural Theory Ronald D. Ziemian, Ph.D. (PDF 893 kb) http://www.box.net/public/idtm28m93p

Section 4. Analysis of Special Structures Louis F. Geschwindner, P.E. (PDF 429 kb) http://www.box.net/public/0618aa8hsb Section 5. Connections William A. Thornton, P.E., and T. Kane, P.E. (PDF 769 kb) http://www.box.net/public/sm84r7c3oh Section 6. Building Design Criteria R. A. LaBoube, P.E. (PDF 844 kb) http://www.box.net/shared/29ysl1l0p9 Section 7. Design of Building Members Ali A. K. Haris, P.E. (PDF 230 kb) http://www.box.net/shared/e4fllp7seu Section 8. Floor and Roof Systems Daniel A. Cuoco, P.E. (PDF 580 kb) http://www.box.net/public/nfgl0gfyg2 Section 9. Lateral-Force Design Charles W. Roeder, P.E. (PDF 392 kb) http://www.box.net/public/5ouxfi63f1 Section 10. Cold-Formed Steel Design R. L. Brockenbrough, P.E. (PDF 320 kb) http://www.box.net/public/q61tvny2ju Section 11. Design Criteria for Bridges Part 1. Application of Criteria for Cost-Effective Highway Bridge Design Robert L. Nickerson, P.E., and Dennis Mertz, P.E. (PDF 426 kb) http://www.box.net/shared/683jaqpx2b Part 2. Railroad Bridge Design Harry B. Cundiff, P.E. (PDF 190 kb) http://www.box.net/public/y4xmkucf0q Section 12. Beam and Girder Bridges Alfred Hedefine, P.E.,John Swindlehurst, P.E., and Mahir Sen, P.E. (PDF 1,126 kb) http://www.box.net/public/31r7kt9bg1 Section 13. Truss Bridges John M. Kulicki, P.E., Joseph E. Prickett, P.E.,and David H. LeRoy, P.E. (PDF 379 kb) http://www.box.net/shared/yn8ktrbenc

Section 14. Arch Bridges Arthur W Hedgren, Jr., P.E. (PDF 1,138 kb) http://www.box.net/shared/v4hsy185tk Section 15. Cable-Suspended Bridges Walter Podolny, Jr., P.E. (PDF 1,224 kb) http://www.box.net/public/2tysegzxa0 ===================================================================== ============== **peraturan beton dari SNI 2002** http://wiryanto.wordpress.com/2007/01/31/sharing-knowledge/ ===================================================================== ============== SNI 03-1729-2002 ya. http://wiryanto.wordpress.com/2006/12/03/aisc-2005-gratis/ ===================================================================== ============== AmericanSocietyofCivilEngineers MinimumDesignLoadsforBuildingsand OtherStructures A. S_ C. E atau S. E_ I seri 7 tahun 05 Chapter 1 � General (down-load PDF 178 kb) http://www.box.net/shared/zl5gdmga64 Chapter 2 � Combinations of Loads (down-load PDF 75 kb) http://www.box.net/shared/qzlmxx2yoo Chapter 3 - Dead Loads Soil Loads and Hydrostatic Pressure (down-load PDF 53 kb) http://www.box.net/shared/i1btsok82n Chapter 4 � Live Loads (down-load PDF 221 kb) http://www.box.net/shared/c39ip0ih3u Chapter 5 � Flood Loads (down-load PDF 164 kb) http://www.box.net/shared/l3y0v8u015 Chapter 6 � Wind Loads (down-load PDF 2,232 kb) http://www.box.net/shared/19lcmv4eif Chapter 7 � Snow Loads (down-load PDF 474 kb) http://www.box.net/shared/otgmohd2o6 Chapter 8 � Rain Loads (down-load PDF 37 kb) http://www.box.net/shared/gdvck4prc7 Chapter 9 - Reserved for Future Provisions (down-load PDF 26 kb) http://www.box.net/shared/749f3xq036

Chapter 10 - Ice Loads-Atmospheric Icing (down-load PDF 576 kb) http://www.box.net/shared/1p3lnlph7x Chapter 11 - Seismic Design Criteria (down-load PDF 498 kb) http://www.box.net/shared/kv2d7k9mey Chapter 12 - Seismic Design Requirements for Building Structures (down-load PDF 1,242 kb) http://www.box.net/shared/zbsrjoyn5u Chapter 13 - Seismic Design Requirements for Nonstructural Components (down-load PDF 553 kb) http://www.box.net/shared/639ed9xism Chapter 14 - Material-Specific Seismic Design and Detailing Requirements (down-load PDF 528 kb) http://www.box.net/shared/4y0zvo2q7y Chapter 15 - Seismic Design Requirements for Nonbuilding Structures (down-load PDF 760 kb) http://www.box.net/shared/qk0sn25y9e Chapter 16 - Seismic Response History Procedures (down-load PDF 118 kb) http://www.box.net/shared/m6gx84nk6f Chapter 17 - Seismic Design Requirements for Seismically Isolated Structures (down-load PDF 533 kb) http://www.box.net/shared/sdccu4th9b Chapter 18 - Seismic Design Requirements for Structures with Damping Systems (down-load PDF 734 kb) http://www.box.net/shared/lz71aj39nv Chapter 19 - Soil Structure Interaction for Seismic Design (down-load PDF 134 kb) http://www.box.net/shared/s799zy1ytu Chapter 20 - Site Classification Procedure for Seismic Design (down-load PDF 88 kb) http://www.box.net/shared/fu9zj4j9lg Chapter 21 - Site-Specific Ground Motion Procedures for Seismic Design (down-load PDF 1,633 kb) http://www.box.net/shared/dg1p9t4mjj Chapter 22 - Seismic Ground Motion and Long-Period Transition Maps (down-load PDF 1,424 kb) http://www.box.net/shared/sgo2mju54v Chapter 23 - Seismic Design Reference Documents (down-load PDF 147 kb) http://www.box.net/shared/tfl1o5d9di Appendix 11A Quality Assurance Provisions Appendix 11B Existing Building Provisions Appendix C Serviceability Considerations (down-load PDF 239 kb) http://www.box.net/shared/ppj7l9vyxa

COMMENTARY (down-load PDF 6,616 kb) http://www.box.net/shared/ui357rq9ct ===================================================================== ============== Civil Engineering Textbooks for Reference DESIGN OF CONCRETE STRUCTURES, 13th By Arthur.H.Nilson McGraw-Hill, New York, 2004 down load di http://rapidshare.com/files/31542208/Design_of_concrete_structures_A.H.Nilson_13th_edition.r ar Masih ada lagi lho ! HANDBOOK OF CORROSION ENGINEERING (10,47MB) By Roberge, P.R, McGraw-Hill, 1999 download di http://rapidshare.de/files/20323168/Roberge_P.R.__Handbook_of_Corrosion_Engineering__McGraw-Hill_1999_.rar download di http://rapidshare.com/files/41811552/Roberge_P.R.__Handbook_of_Corrosion_Engineering__McGraw-Hill_1999.rar STEELWORK CORROSION CONTROL (12,74MB) By D.A. Bayliss, Taylor & Francis, 2002 download di http://mihd.net/7s4vz9 SOIL MECHANICS IN ENGINEERING PRACTICE (48,22MB) By Karl Terzaghi, John Willey & Sons, Inc., 1996 download di http://rapidshare.com/files/9854991/smiep.rar BUILDING DESIGN AND CONSTRUCTION HANDBOOK (6th Ed) McGraw-Hill, 2000 download di http://www.4shared.com/file/8692903/ff9f5292/BuildingDesign_and_ConstructionHandbook_m uyac.html download di http://www.bestsharing.com/files/ms001107403/Building%20Design%20and %20Construction%20Handbook.pdf.htm BRIDGE ENGINEERING HANDBOOK By Wai Fah Chen, CRC Press, 1999 Part 1:50 MB - Part 2 : 50 MB - Part 3 :18,925 MB download di http://www.4shared.com/file/9197544/8021306f/wwwallislamnet_Almourrakochi_Bridge_Engin eering_Handbookpart1.html download di http://www.4shared.com/file/9199091/a3f10f75/wwwallislamnet_Almourrakochi_Bridge_Engin eering_Handbookpart2.html download di

http://www.4shared.com/file/9199778/41e18cda/wwwallislamnet_Almourrakochi_Bridge_Engin eering_Handbookpart3.html BRIDGE ENGINEERING SEISMIC DESIGN (55MB) By Wai-Fah Chen, CRC Press, 2003 download di http://mihd.net/simhvn ===================================================================== ============== Steel Design Guide Series Column Base Plates Design of Column Base Plates John T. DeWolf Professor of Civil Engineering University of Connecticut Storrs, Connecticut http://www.box.net/shared/6329yi9j6m ===================================================================== ============== Design Guide for Low-and Medium-Rise Steel Buildings http://www.box.net/shared/8umfzqjlgd ===================================================================== ============== Floor Vibrations http://www.box.net/shared/2reeczbq3n ===================================================================== ============== Staggered Truss Framing Systems http://www.box.net/shared/7xefpnamof ===================================================================== ============== AWS D1.1 las http://www.4shared.com/dir/1882148/a7350711/JIS.html ===================================================================== ============== Structure Engineer http://www.4shared.com/file/14624844/27f6d177/Manual_of_Stel_Construction_2nd_ed_LRFD 93.html http://www.4shared.com/dir/2541514/8ece5c0f/sharing.html ===================================================================== ============== SNI tentang gempa SNI 1726-2002 http://www.box.net/public/755vo6dqbh

Steel Handbook

ISBN: 0070087822 Title: Structural Steel Designer’s Handbook, 3rd edition, 1999-11 Author: Roger L Brockenbrough, Frederick S. Merritt Publisher: McGraw-Hill Professional Publication Date: 1999-11-11 Number Of Pages: 1208 Editorial Description The only A-Z guide to structural steel design Find a wealth of practical techniques for costeffectively designing steel structures from buildings to bridges in Structural Steel Designer’s Handbook by Roger L. Brockenbrough and Frederick S. Merritt The Handbook’s integrated approach gives you immediately useful information about: • •

steel as a material - how it’s fabricated and erected how to analyze a structure to determine internal forces and moments from dead, live, and seismic loads how to make detailed design calculations to withstand those forces

This new third edition introduces you to the latest developments in seismic design, including more ductile connections, and high performance steels…offers an expanded treatment of welding….helps you understand design requirements for hollow structural sections and for coldformed steel members….and explores numerous design examples. You get examples for both Load and Resistance Factor Design (LRFD) and Allowable Stress Design (ASD). This edition of the handbook has been updated throughout to reflect continuing changes in design trends and improvements in design specifications. Criteria and examples are included for both allowable-stress design (ASD) and load-and-resistance-factor design (LRFD) methods, but an increased emphasis has been placed on LRFD to reflect its growing use in practice. CONTENTS title (PDF 44 kb) ; preface (PDF 38 kb); t.o.c (PDF 252 kb) ; index (PDF 2123 kb)

Section 1. Properties of Structural Steels and Effects of Steelmaking and Fabrication Roger L. Brockenbrough, P.E. (PDF 299 kb) Section 2. Fabrication and Erection Thomas Schflaly (PDF 214 kb) Section 3. General Structural Theory Ronald D. Ziemian, Ph.D. (PDF 893 kb) Section 4. Analysis of Special Structures Louis F. Geschwindner, P.E. (PDF 429 kb) Section 5. Connections William A. Thornton, P.E., and T. Kane, P.E. (PDF 769 kb) Section 6. Building Design Criteria R. A. LaBoube, P.E. (PDF 844 kb) Section 7. Design of Building Members Ali A. K. Haris, P.E. (PDF 230 kb) Section 8. Floor and Roof Systems Daniel A. Cuoco, P.E. (PDF 580 kb) Section 9. Lateral-Force Design Charles W. Roeder, P.E. (PDF 392 kb) Section 10. Cold-Formed Steel Design R. L. Brockenbrough, P.E. (PDF 320 kb) Section 11. Design Criteria for Bridges Part 1. Application of Criteria for Cost-Effective Highway Bridge Design Robert L. Nickerson, P.E., and Dennis Mertz, P.E. (PDF 426 kb)

Part 2. Railroad Bridge Design Harry B. Cundiff, P.E. (PDF 190 kb) Section 12. Beam and Girder Bridges Alfred Hedefine, P.E.,John Swindlehurst, P.E., and Mahir Sen, P.E. (PDF 1,126 kb) Section 13. Truss Bridges John M. Kulicki, P.E., Joseph E. Prickett, P.E.,and David H. LeRoy, P.E. (PDF 379 kb) Section 14. Arch Bridges Arthur W Hedgren, Jr., P.E. (PDF 1,138 kb) Section 15. Cable-Suspended Bridges Walter Podolny, Jr., P.E. (PDF 1,224 kb)

Bridge Engineering:Construction and Maintenance (Principles and Applications in Engineering) (12,981MB) By Wai-Fah Chen; Lian Duan, CRC Press, 2003 (256 Pages) ISBN : 0849316847 Book Description: The Principles and Application in Engineering Series is a new series of convenient, economical references sharply focused on particular engineering topics and subspecialties. Each volume in this series comprises chapters carefully selected from CRC’s bestselling handbooks, logically organized for optimum convenience, and thoughtfully priced to fit every budget. From the award-winning Bridge Engineering Handbook, Bridge Engineering: Construction and Maintenance takes an in-depth look at the construction engineering and maintenance aspects of steel and concrete bridges. Topics include effective project management, construction procedures

and practices, construction and maintenance inspections and ratings, and bridge strengthening and rehabilitation. down load di http://rapidshare.com

Bridge Engineering : Substructure Design (Principles and Applications in Engineering) (6,906MB) By Wai-Fah Chen; Lian Duan, CRC Press, 2003 (272 Pages) ISBN : 0849316812 Book Description: Bridge Engineering: Substructure Design focuses on the various components comprising and affecting bridge substructures. These include bearings, piers and columns, towers, abutments and retaining structures, footings and foundations, and bridge hydraulics. For each component, the contributing author addresses the various types of that component, discusses specific selection or design criteria, and provides thorough references. Other relevant topics studied in this volume include geotechnical considerations, such as field exploration techniques and site characterization, and designing bridges to minimize the potential for and damage resulting from vessel collisions.geotechnical considerations. down load di http://rapidshare.com

Update Link alternatif (postingan sebelumnya) :

Bridge Engineering : Seismic Design (Principles and Applications in Engineering) (58,436MB) By Wai-Fah Chen; Lian Duan, CRC Press, 2003 (480 Pages) ISBN : 0849316839 Book Description: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit technology. In-depth discussions contributed by bridge and earthquake engineers from around the world cover the types and effects of earthquake damage and structural performance criteria. The book also includes an overview of seismic design practices in Japan, including a study of the damage to highway bridges caused by the Hyogo-ken Nanbu earthquake and the changes in retrofit practices precipitated by that earthquake. down load di http://rapidshare.com

AASHTO Standard Specification for Highway Bridges, 16th Ed (16,041 MB) By AASHTO, American Association of State Highway & Trans, 1996 (760 Pages) ISBN-10: 1560510404 ISBN-13: 978-1560510406 Book Description: The structural design standards used by state bridge engineers, engineering colleges and universities, and practicing engineers worldwide. Customary U.S. Units. Loose-leaf with three ring binder. Replaces the 15th Edition and Interim Specifications-Bridges-1993, 9400 and 1995. down load file *.rar di http://rapidshare.com down load file *.pdf di http://www.rapidshare.com

CONCRETE BRIDGE ENGINEERING: Performance and Advanced By Robert J. Cope, Elsevier Science Pub.Co, 2003 (360 Pages) ISBN : 0203233638 down load file *.rar di http://rapidshare.com

BRIDGE ENGINEERING (16,37MB) By Jim J. Zhao; Demetrios E. Tonias, McGraw-Hill Professional, 2006 (488 Pages) ISBN-10: 0071459030 down load via link di http://w13.easy-share.com down load via link di http://depositfiles.com

TEXTBOOK BETON BERTULANG :

REINFORCED CONCRETE DEEP BEAMS (7,671 MB) By F.K.Kong, Routledge, 1998 (304 Pages) ISBN : 0216926955 Book Description: The contents of this book have been chosen with the following main aims: to review the present coverage of the major design codes and the CIRIA guide, and to explain the fundamental behaviour of deep beams; to provide information on design topics which are inadequately covered by the current codes and design manuals; and to give authoritative reviews of some powerful concepts and techniques for the design and analysis of deep beams.

down load via link di http://rapidshare.com down load file *.rar di http://www.rapidshare.com down load via link di http://mihd.net

STRUCTURAL DETAILS in CONCRETE (7,43 MB) By M. Y. H. Bangash, Blackwell Science Inc, 1992 (272Pages) ISBN : 063202853X Book Description: Here the reader is given examples of some reinforced, composite and prestressed concrete bridges with simplified structural details. A number of books have been published on various aspects of concrete design and detailing, but this is believed to be the first comprehensive detailing manual, and covers details in reinforced, prestressed, precast and composite concrete. down load file *.pdf di http://rapidshare.de

CONCRETE FORMWORK SYSTEMS (0,96 MB) By Awad S. Hanna, CRC Press, 1998 (272 Pages) ISBN : 0824700724 Book Description: Offers insights on currently-used concrete formwork structures, from classification, system components and materials’ properties to selection and construction requirements and procedures, while considering product quality, labour, safety and economic factors throughout. The text details hand-set, crane-dependent and crane-independent systems. down load file *.rar di http://rapidshare.com down load via link di http://mihd.net

STRENGTHENING of REINFORCED CONCRETE STRUCTURES (7,154 MB) By L C Hollaway and M B Leeming, Woodhead Publishing, 1999 (250 Pages) ISBN 1855733781 Book Description: The in situ rehabilitation or upgrading of reinforced concrete members using bonded steel plates is an effective, convenient and economic method of improving structural performance. However, disadvantages inherent in the use of steel have stimulated research into the possibility of using fibre reinforced polymer (FRP) materials in its place, providing a non-corrosive, more versatile strengthening system.

The book has been designed for practising structural and civil engineers seeking to understand the principles and design technology of plate bonding, and for final year undergraduate and postgraduate engineers studying the principles of highway and bridge engineering and structural engineering. down load file *.rar di http://www.rapidshare.com

REPAIR, PROTECTION and WATERPROOFING of CONCRETE STRUCTURES, 3th Ed. (13,8MB) By P. Perkins, Taylor & Francis, 1997 (233 Pages) ISBN: 0419202803 Book Description: A wealth of recent research into the continued deterioration of reinforced concrete structures has led to a review of methods of investigation and repair techniques. This thoroughly revised and updated edition brings together the fundamental aspects of this world wide problem and offers advice on how investigations, diagnosis and consequent remedial work should be carried out. down load file *.pdf di http://rapidshare.com down load via link di http://www.file2upload.com down load via link di http://mihd.net

TEXTBOOK TENTANG FOUNDATION :

PRACTICAL FOUNDATION ENGINEERING HANDBOOK, 2nd Ed (27,546 MB) By Robert Wade Brown, McGraw-Hill, 2000 ISBN : 0071351396 Book Description: Standard and advanced methods for every type of foundation engineering Incorporating the expertise of a distinguished team of soil and foundation engineers, this expanded and updated Handbook clarifies and simplifies every part of the job, from site assessment through design and construction, to remediation of failed foundations. Here are proven, expert design alternatives for even substandard soil and challenging site conditions, with example problems for any type of structure. You get not only important how-to’s, but equally vital how-not-to’s that prevent costly damage to structures and professional reputations. Handy illustrations, charts, tables, and casestudy examples ease your work. You also get full coverage of failure analysis and repairs New in this edition are treatments of forensics investigations; grouting substandard soils; special coverage of lightly loaded foundations, pier and beam, as well as conventional and post-tension slabs; advice on litigation and role of expert witnesseses; and much more. down load file *.rar di http://www.rapidshare.com

PILE DESIGN and CONSTRUCTION PRACTICE, 4th Ed

(18,130 MB) by Michael John Tomlinson,Taylor & Francis, 1994 (432 Pages) ISBN 0419184503 Book Description: The fourth edition of this well-known book is fully revised and up-dated. It deals comprehensively with every aspect of design and construction of all types of piled foundation. A key feature of this book is the large number of worked examples, many of which are based on actual problems encountered in practice. down load file *.rar di http://rapidshare.com

FOUNDATION ANALYSIS and DESIGN, 5th Ed (52,789MB) By Joseph E. Bowles, McGraw-Hill, 1996 (1024 Pages) ISBN : 0079122477 down load file *.rar di http://rapidshare.com down load via link di http://mihd.net

COLD-FORMED STEEL DESIGN, 3rd Ed (5,997MB) By Wei-Wen Yu, Wiley-Interscience, 2000 (848 Pages) ISBN : 0471348090 Book Description: The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Third Edition of the classic text provides you with more of the detailed, up-tothe-minute technical information and expert guidance you need to make optimum use of this incredibly versatile material for building construction. down load file *.rar di http://rapidshare.com down load via link di http://mihd.net

FINITE ELEMENT METHOD: A Practical Course (10,189MB) By Gui-Rong Liu; S.S. Quek, Elsevier, 2003 (384 Pages) ISBN : 0750658665 Book Description: The Finite Element Method (FEM) has become an indispensable technology for the modelling and simulation of engineering systems. Written for engineers and students alike, the aim of the book is to provide the necessary theories and techniques of the FEM for readers to be able to use a commercial FEM package to solve primarily linear problems in mechanical and civil

engineering with the main focus on structural mechanics and heat transfer.Fundamental theories are introduced in a straightforward way, and state-of-the-art techniques for designing and analyzing engineering systems, including microstructural systems are explained in detail. Case studies are used to demonstrate these theories, methods, techniques and practical applications, and numerous diagrams and tables are used throughout. The case studies and examples use the commercial software package ABAQUS, but the techniques explained are equally applicable for readers using other applications including NASTRAN, ANSYS, MARC, etc. Full sets of PowerPoint slides developed by the authors for their course on FEM are available as a free download from a companion website.* A practical and accessible guide to this complex, yet important subject* Covers modeling techniques that predict how components will operate and tolerate loads, stresses and strains in reality* Full set of PowerPoint presentation slides which illustrate and support the book are available on a companion website. down load file *.rar di http://rapidshare.com down load via link di http://www.4shared.com

STABILITY OF STRUCTURES: Elastic, Inelastic, Fracture, and Damage Theories (12,03 MB) By Zdenek P. Bazant; Luigi Cedolin, Courier Dover Publications, 2003 (1056 Pages) ISBN: 0486425681 Book Description: A vital element of structural and continuum mechanics, stability theory has limitless applications in engineering. This text explores the principles and applications of stability analysis, offering students solid footing in the subject; it also functions as a convenient reference for engineers and scientists researching basic approaches and concepts. In addition to conventional aspects of elastic stability, the text emphasizes nonelastic stability. Topics include modern stability problems of fracture and damage, the thermodynamic principles of stability in irreversible systems, viscoelastic and viscoplastic buckling, and other key areas, plus numerous examples and 700 exercise problems. http://mihd.net/hywe94

STANDARD HANDBOOK for CIVIL ENGINEERS, 4th Ed (13,847 MB) By Frederick S. Merritt; Jonathan T. Ricketts; M. Kent Loftin, McGraw-Hill, 2003 (1600 Pages) ISBN : 0071364730 Book Description: Updating the third edition, this revised classic features more than 50% new information and remains the most valuable source on principles and techniques needed by practicing civil engineers. It incorporates scores of revisions and innovations in design, construction, materials, and equipment, including: Code changes from the ACI, ASTM, AISC; Specification for Wood

Construction; The latest EPA and OSHA regulations; Changes in highway and airport pavement design; Expanded coverage of harbor engineering; More material on water resources; New methods for nondestructive testing of piles and applications of geosynthetics; The latest techniques of load-and-resistance factor design of structural steels. down load file *.rar di http://www.rapidshare.com down load file *.rar di http://rapidshare.com

HANDBOOK of CIVIL ENGINEERING CALCULATIONS (30,826 MB) By Tyler Gregory Hicks, McGraw-Hill Professional, 1999 (800 Pages) ISBN : 0070288143 Book Description: Handle every day-to-day calculation instantly and accurately. Now, a single authoritative reference offers you a surefire way to save time handling routine and non-routine calculations in the design, construction, rehab and maintenance of all types of structures. Edited by Tyler G. Hicks, Handbook of Civil Engineering Calculations explains and illustrates over 500 key calculations covering the entire field: structural steel engineering and design; reinforced and prestressed concrete; timber engineering; soil mechanics; surveying, route design, and highway bridges; fluid mechanics; pumps, piping, and hydro power;water supply and stormwater; sanitary wastewater treatment and control; and engineering economics.Using both customary and SI units, each calculation procedure includes a worked-out example with numbered steps. You see exactly how to compute the desired values for a particular design, and go quickly from data to finished design. down load file *.rar di http://www.rapidshare.com down load file *.rar di http://www.rapidshare.com

HANDBOOK of STRUCTURAL ENGINEERING, 2nd Ed (49,2 MB) By Wai-Fah Chen; Eric M. Lui, CRC Press, 2005 (1768 Pages) ISBN : 0849315697 Book Description: Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The contributors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind and earthquakeresistant design; design of prestressed structures; high-performance steel, concrete, and fiberreinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety. down load file *.rar di http://rapidshare.com down load via link di http://www.4shared.com

down load via link di http://www.ftp2share.com Jika memerlukan PASSWORD: ebooksclub

STRUCTURAL ANALYSIS with FINITE ELEMENTS (17,498 MB) By Friedel Hartmann; Casimir Katz, Springer, 2004 ISBN : 3540404163 Book Description: Structural Analysis with Finite Elements develops the foundations and applications of the finite element method in structural analysis in a language which is familiar to structural engineers. At the same time, it uncovers the structural mechanics behind the finite element method. This innovative text explores and explains issues such as: why finite element results are “wrong”, why support reactions are relatively accurate, why stresses at midpoints are more reliable, why averaging the stresses sometimes may not help or why the equilibrium conditions are violated. An additional chapter treats the boundary element method and related software is available at www.winfem.de. Structural Analysis with Finite Elements provides a new foundation for the finite element method that enables structural engineers to address key questions that arise in computer modelling of structures with finite elements. down load file *.pdf di http://rapidshare.com

BRIDGE_INSPECTION_REPORT http://www.dot.state.mn.us/i35wbridge/pdfs/bridge_inspection_report_06-15-06.pdf

IBC 2006 PDF 679 17, 26 MB http://depositfiles.com/en/files/385870 ASCE PUBLICATION 1. Design of Blast Resistant Buildings in Petrochemical Facilities, 280 pages

(non-original print out, base on scan works) down load this pdf file 11 Mb ACI STRUCTURAL JOURNAL 1. D. Ngo and A.C. Scordelis .(1967). “Finite Element Analysis of Reinforced Concrete

Beams”, ACI Journal , March 1967 (down-load PDF 2,848 kb) ini merupakan paper klasik pembahasan f.e.m untuk struktur beton bertulang

2. Ramon L. Carrasquillo, Arthur H. Nilson, and Floyd O. Slate. (1981). “Properties of High

Strength Concrete Subject to Short-Term Loads”, ACI Journal, March-April 1981(download PDF 581 kb) 3. Peter Marti .(1985). “Basic Tools of Reinforced Concrete Beam Design”, ACI Journal, January-February 1985 (down-load PDF 3,038 kb) 4. Frank J. Vecchio and Michael P. Collins.(1986). “The Modified Compression-Field Theory for Reinforced Concrete Element Subjected to Shear”, ACI Journal, March-April 1986 (down-load PDF 1,568 kb) 5. Frank J. Vecchio and Michael P. Collins .(1988). “Predicting the Response of Reinforced Concrete Beams Subjected to Shear Using Modified Compression Field Theory”, ACI Structural Journal, May-June 1988 (down-load PDF 1,280 kb) 6. Julio A. Ramirez and John E. Breen .(1991). “Evaluation of a Modified Truss-Model Approach for Beams in Shear”, ACI Structural Journal, V.88, No.5, September-October 1991 (down-load 2,500 kb) 7. Michael P. Collins, Denis Mitchell, Perry Adebar and Frank J. Vecchio .(1996). “A General Shear Design Method”, ACI Structural Journal, January-February 1996 (download PDF 1,401 kb) 8. Brian S. Maxwell and John E. Breen. (2000). “Experimental Evaluation of Strut-and-Tie Model Applied to Deep Beam with Opening”, ACI Structural Journal, V.97 No.1, Januari-Februari 2000 (down-load 1,880 kb) 9. Federico A. Tavarez, Lawrence C. Bank, and Michael E. Plesha .(2003). “Analysis of Fiber-Reinforced Polymer Composite Grid Reinforced Concrete Beams”, ACI Structural Journal, March-April 2003 (down-load PDF 1,367 kb) 10. Daniel Palermo and Frank J. Vecchio .(2003). “Compression Field Modeling of Reinforced Concrete Subjected to Reversed Loading: Formulation”, ACI Structural Journal, V. 100 / 5 (down-load PDF 182 kb) 11. Joel M. Barron and Mary Beth D. Hueste.(2004). “Diaphragm Effects in Rectangular Reinforced Concrete Buildings”, ACI Structural Journal, V. 101 / 5 (down-load PDF 189 kb) 12. Juan F. Correal, M. Saiid Saiidi, David Sanders, and Saad El-Azazy.(2007). “Shake Table Studies of Bridge Columns with Double Interlocking Spirals”, ACI Structural Journal V. 104 / 4 (down-load PDF 1139 kb) 13. Khaldoun N. Rahal. (2007). “Combined Torsion and Bending in Reinforced and Prestressed Concrete Beams Using Simplified Method for Combined Stress-Resultants”, ACI Structural Journal, V. 104 / 4 (down-load PDF 630 kb) 14. P. Revathi and Devdas Menon.(2007). “Slenderness Effects in Reinforced Concrete Beams”, ACI Structural Journal, V. 104 / 4 (down-load PDF 570 kb) 15. Keun-Hyeok Yang, Heon-Soo Chung, and Ashraf F. Ashour.(2007).”Influence of Shear Reinforcement on Reinforced Concrete Continuous Deep Beams”, ACI Structural Journal, V. 104 / 4 (down-load PDF 674 kb) 16. Joseph Robert Yost, Shawn P. Gross, David W. Dinehart, and Jason J. Mildenberg. (2007). “Flexural Behavior of Concrete Beams Strengthened with Near-Surface-Mounted CFRP Strips”, ACI Structural Journal, V. 104 / 4 (down-load PDF 605 kb) 17. Kyoung-Kyu Choi, Mahmoud M. Reda Taha, and Alaa G. Sherif .(2007). “Simplified Punching Shear Design Method for Slab-Column Connections Using Fuzzy Learning”, ACI Structural Journal, V. 104 / 4 (down-load PDF 572 kb)

18. Mary Beth D. Hueste, JoAnn Browning, Andres Lepage, and John W. Wallace .(2007).

“Seismic Design Criteria for Slab-Column Connections”, ACI Structural Journal, V. 104 / 4 (down-load PDF 315 kb) 19. Hung-Jen Lee and Jen-Wen Ko. (2007).”Eccentric Reinforced Concrete Beam-Column Connections Subjected to Cyclic Loading in Principal Directions”, ACI Structural Journal, V. 104 / 4 (down-load PDF 676 kb) 20. Alexandros G. Tsonos.(2007). “Cyclic Load Behavior of Reinforced Concrete BeamColumn Subassemblages of Modern Structures”, ACI Structural Journal, V. 104 / 4 (down-load PDF 982 kb) 21. Nam Ho Lee, Kang Sik Kim, Chang Joon Bang, and Kwang Ryeon Park.(2007). “Tensile-Headed Anchors with Large Diameter and Deep Embedment in Concrete”, ACI Structural Journal, V. 104 / 4 (down-load PDF 765 kb) 22. José R. Martí-Vargas, César A. Arbeláez, Pedro Serna-Ros, and Carmen Castro-Bugallo. (2007). “Reliability of Transfer Length Estimation from Strand End Slip”, ACI Structural Journal, V. 104 / 4 (down-load PDF 419 kb) 23. Miguel Fernández Ruiz and Aurelio Muttoni.(2007). “On Development of Suitable Stress Fields for Structural Concrete”, ACI Structural Journal, V. 104 / 4 (down-load PDF 557 kb) 24. Discussion by Himat Solanki: Shear Strength of Reinforced Concrete T-Beams without Transverse Reinforcement. Paper by A. Koray Tureyen, Tyler S. Wolf, and Robert J. Frosch (From the Sept.-Oct. 2006 ACI Structural Journal) (down-load PDF 72 kb) BULLETIN of THE NEW ZEALAND NSEE M.J. Nigel Priestley .(1993). “Myths and Fallacies in Earthquake Engineering - Conflict between Design and Reality”, Bulletin of The New Zealand National Society for Earthquake Engineering, Vol. 26, No.3 September 1993 (down-load PDF 2,580 kb) CANADIAN JOURNAL of CIVIL ENGINEERING 1. M.P. Collins, F.J. Vecchio and G. Mehlhorn .(1985). “An international competition to

2. 3. 4.

5.

6.

predict the response of reinforced concrete panels”, Can. J. Civ. Eng. 12: 624–644 (down-load PDF 2,965 kb) F.J. Vecchio and S. Balopoulou .(1990). “On the nonlinear behaviour of reinforced concrete frames”, Can. J. Civ. Eng. 17: 698–704 (down-load PDF 1,375 kb) R.G. Selby and F.J. Vecchio .(1997). “A constitutive model for analysis of reinforced concrete solids”, Can. J. Civ. Eng. 24: 460–470 (down-load PDF 1,477 kb) D. Svecova and R.J. Eden .(2004). “Flexural and shear strengthening of timber beams using glass fibre reinforced polymer bars — an experimental investigation”, Can. J. Civ. Eng. 31: 45–55 (down-load PDF 1,929 kb) William Cavers and Gordon A. Fenton .(2004). “An evaluation of pile cap design methods in accordance with the Canadian design standard”, Can. J. Civ. Eng. 31: 109– 119 (down-load PDF 223 kb) Aftab A. Mufti, Baidar Bakht, Dagmar Svecova, and Vidyadhar Limaye .(2004). “Failure tests on full-scale models of grout laminated wood decks”, Can. J. Civ. Eng. 31: 133–145 (down-load PDF 774 kb)

7. Ricardo N.F. do Carmo and Sérgio M.R. Lopes .(2005). “Ductility and linear analysis

with moment redistribution in reinforced high-strength concrete beams”, Can. J. Civ. Eng. 32: 194–203 (down-load PDF 478 kb) 8. Y.F. Li, S.H. Chen, K.C. Chang, and K.Y. Liu .(2005). “A constitutive model of concrete confined by steel reinforcements and steel jackets”, Can. J. Civ. Eng. 32: 279–288 (down-load PDF 662 kb) COMPUTER and CONCRETE 1. Frank J. Vecchio, Evan C. Bentz and Michael P. Collins .(2004). “Tools for forensic

analysis of concrete structures”, Computers and Concrete, Vol. 1, No. 1 (2004) 1-14 (down-load PDF 1,224 kb) COMPUTER and STRUCTURES 1. Lip H. Teh.(2004).”Beam element verification for 3D elastic steel frame analysis”,

Computers and Structures 82 (2004) 1167–1179 (down-load PDF 400 kb) Note : Dr. Lip lahir di Indonesia, saat ini adalah pakar struktur sekaligus dosen di University of Sidney, ada beberapa comment beliau di blog ini yang mendukung. Opini beliau ditampilkan pada sampul belakang buku SAP2000 Edisi Baru yang terbit tahun 2007 ini. Thanks Dr. Lip. COMPOSITE STRUCTURES A.J.M. Ferreira, P.P. Camanho, A.T. Marques, A.A. Fernandes .(2001). “Modelling of concrete beams reinforced with FRP re-bars”, Composite Structures 53 (2001) 107-116 (down-load PDF 322 kb) CONCRETE INTERNATIONAL 1. K.W. Day. (1981). “Quality Control of 55 MPa Concrete for Collins Place Project,

Melbourne, Australia”, Concrete International, March 1981 (down-load PDF 1,266 kb) 2. D.M. Rogowsky and J.G. MacGregor .(1986). “Design of Reinforced Concrete Deep Beams - Using the strut and tie model”, Concrete International, August 1986 (down-load PDF 2,685 kb) 3. James K. Wight And Gustavo J. Parra-Montesinos . (2003). “Strut-and-Tie Model for Deep Beam Design: A practical exercise using Appendix A of the 2002 ACI Building Code”, Concrete International, May 2003 (down-load PDF 156 kb) CONSTRUCTION AND BUILDING MATERIALS 1. R.F. Pedreschi, B.P. Sinha.(2007). “An experimental study of cold formed steel trusses

using mechanical clinching”, Constr Build Mater (2007), doi:10.1016/j.conbuildmat.2006.12.014 (down-load PDF 1021 kb)

EARTHQUAKE ENGINEERING and ENGINEERING SEISMOLOGY 1. Thomas Paulay .(1999). “A Simple Seismic Design Strategy Based on Displacement and

Ductility Compatibility”, Earthquake Engineering and Engineering Seismology, Vol.1 No.1 (down-load PDF 489 kb) 2. C. H. Yeh and C. H. Loh .(2001). “Methodology of Seismic Hazard Analysis and Damage Assessment”, Earthquake Engineering and Engineering Seismology, Vol.3 No.1 (down-load PDF 560 kb) EARTHQUAKE ENGINEERING and STRUCTURAL DYNAMICS 1. Sinan Akkar and Julian J. Bommer.(2007). “Prediction of elastic displacement response

2.

3.

4.

5.

6.

spectra in Europe and the Middle East”, Earthquake Engng Struct. Dyn. 2007; 36:1275– 1301 (down-load PDF 563 kb) Chin-Hsiung Loh, Jerome P. Lynch, Kung-Chun Lu, Yang Wang, Chia-Ming Chang, Pei-Yang Lin and Ting-Hei Yeh.(2007). “Experimental verification of a wireless sensing and control system for structural control using MR dampers”, Earthquake Engng Struct. Dyn. 2007; 36:1303–1328 (down-load PDF 917 kb) Songye Zhu and Yunfeng Zhang.(2007). “Seismic behaviour of self-centring braced frame buildings with reusable hysteretic damping brace”, Earthquake Engng Struct. Dyn. 2007; 36:1329–1346 (down-load PDF 647 kb) R. Pinho, C. Casarotti and S. Antoniou.(2007). “A comparison of single-run pushover analysis techniques for seismic assessment of bridges”, Earthquake Engng Struct. Dyn. 2007; 36:1347–1362 (down-load PDF 828 kb) Manuel Navarro,Francisco Vidal, Takahisa Enomoto, Francisco J. Alcala, Antonio Garcia-Jerez, Francisco J. Sanchez and Norio Abeki.(2007). “Analysis of the weightiness of site effects on reinforced concrete (RC) building seismic behaviour: The Adra town example (SE Spain)”, Earthquake Engng Struct. Dyn. 2007; 36:1363–1383 (down-load PDF 843 kb) M. R. Ghayamghamian, and G. R. Nouri.(2007). “On the characteristics of ground motion rotational components using Chiba dense array data”, Earthquake Engng Struct. Dyn. 2007; 36:1407–1429 (down-load PDF 958 kb)

EARTHQUAKE SPECTRA 1. Peter Fajfar .(2000). “A Nonlinear Analysis Method for Performance Based Seismic

Design”, Earthquake Spectra, Vol.16 No.3 (down-load PDF 167 kb) 2. Keith A. Porter,James L. Beck,and Rustem Shaikhutdinova .(2004). “Simplified

Estimation of Economic Seismic Risk for Buildings”, Earthquake Spectra, Vol.20,No.4 (down-load PDF 579 kb) ENGINEERING CONCRETE

E. Montoya, F.J. Vecchio, S.A. Sheikh .(2004). “Numerical evaluation of the behaviour of steel and FRP-confined concrete columns using compression field modelling”, Engineering Structures 26(2004) 1535-1545 (down-load PDF 393 kb) ENGINEERING STRUCTURES 1. Seung-Eock Kim, Kyung-Won Kang, Dong-Ho Lee .(2003). “Full-scale testing of space

2.

3. 4. 5.

steel frame subjected to proportional loads”, Engineering Structures 25 (2003) 69–79 (down-load PDF 562 kb) H. Sezen, A.S. Whittaker, K.J. Elwood, K.M. Mosalam .(2003). “Performance of reinforced concrete buildings during the August 17, 1999 Kocaeli, Turkey earthquake, and seismic design and construction practise in Turkey”, Engineering Structures 25 (2003) 103–114 (down-load PDF 1,099 kb) L. Cavaleri, N. Miraglia, M. Papia .(2003). “Pumice concrete for structural wall panels”, Engineering Structures 25 (2003) 115–125 (down-load PDF 586 kb) John L. Wilson .(2003). “Earthquake response of tall reinforced concrete chimneys”,Engineering Structures 25 (2003) 11–24 (down-load PDF 234 kb) M. Brun, J.M. Reynouard, L. Jezequel .(2003). “A simple shear wall model taking into account stiffness degradation”, Engineering Structures 25 (2003) 1–9 (down-load PDF 362 kb)

ENGINEERING JOURNAL - AISC 1. William A. Litle.(1966). “Small Scale Models for Steel Frameworks”, AISC Engineering

Journal, July 1966 (down-load 2,580 kb) 2. W.H. Munse .(1967). “High-Strength Bolting”, AISC Engineering Journal, January 1967 (down-load PDF 885 kb) 3. A. Lally and W. A. Milek, JR..(1969). “Bridge Construction Details”, AISC Engineering Journal, January 1969 (down-load 452 kb) 4. Allen E. Wehrmeister.(1969). “Use of Ultrasonic Testing in the Structural Steel Industry”, AISC Engineering Journal, April 1969 (down-load 1,351 kb) 5. R. H. R. Tide And T. V. Galambos .(1970). “Composite Open-Web Steel Joists”, AISC Engineering Journal, January 1970 (down-load 739 kb) 6. Fazlur R. Khan and Anthony F. Nassetta.(1970).”Temperature Effects on Tall Steel Framed Buildings - Part 3—Design Considerations”, AISC Engineering Journal,October 1970 (down-load 506 kb) 7. John H. A. Struik, Abayomi O. Oyeledun and John W. Fisher. (1973). “Bolt Tension Control with a Direct Tension Indicator”, AISC Engineering Journal, First Quarter 1973 (down-load 593 kb) 8. T.V. Galambos .(1978). “Load Factor Design of Steel Buildings”, AISC Engineering Journal, July 1978 (down-load PDF 65 kb) 9. S.T. Rolfe .(1977). “Fracture and Fatigue Control in Steel Structures”, AISC Engineering Journal, First Quarter (down-load 162 kb) 10. N. Krishnamurthy .(1978). “A Fresh Look at Bolted End-Plated Behavior and Design”, Engineering Journal, Second Quarter (down-load 234 kb)

11. John D. Griffiths .(1984). “End-Plate Moment Connections - Their Use and Misuse”,

Engineering Journal, First Quarter (down-load PDF 42 kb) 12. Michael P. Cohen .(1986). “Design Solutions Utilizing the Staggered-steel Truss

System”, Engineering Journal, Third Quarter (down-load PDF 575 kb) 13. Lambert Tall .(1989). “The Reinforcement of Steel Columns”, Engineering Journal, First

Quarter 1989 (down-load 60 kb) 14. Mark A. Bradford .(1991). “Buckling of Prestressed Steel Girders”, Engineering Journal,

Third Quarter 1991 (down-load 50 kb) 15. Patrick D. Zuraski .(1992). “The Significance and Application of Cb in Beam Design”, Engineering Journal, First Quarter (down-load PDF 115 kb) 16. W. McGuire .(1992). “Computers and Steel Design”, Engineering Journal, Fourth Quarter (down-load PDF 1,120 kb) 17. Engineering Journal Vol. 29 tahun 1992 - Lengkap 171 halaman 18. Engineering Journal Vol. 30 tahun 1993 - Lengkap 152 halaman JOURNAL of THE CONSTRUCTION DIVISION Boyd C. Paulson, Jr. (1976). “Goal for Education and Research in Construction”, Journal of Construction Division, September 1976 (down-load PDF 103 kb) JOURNAL of CONSTRUCTIONAL STEEL RESEARCH A.M Citipitioglu, R.M. Haj-Ali, D.W. White .(2002). “Refined 3D finite element modeling of partially restrained connections including slip”, Journal of Constructional Steel Research 58 (2002) 995-1013 (down-load PDF 763 kb) JOURNAL of PERFORMANCE OF CONSTRUCTED FACILITIES - ASCE 1. F.J. Vecchio .(2002). “Contribution of Nonlinear Finite-Element Analysis to Evaluation

of Two Structural Concrete Failures”, Journal of Performance of Constructed Facilities, Vol. 16 No.3, August 1, 2002 (down-load PDF 1,039 kb) 2. Frederick R. Rutz, and Kevin L. Rens.(2007).”Wind Loads for 19th Century Bridges: Design Evolution, Historic Failures, and Modern Preservation”, Journal of Performance of Constructed Facilities, Vol. 21 No.2, April 1, 2007 (down-load PDF 758 kb) JOURNAL of MATERIALS IN CIVIL ENGINEERING Chee Kiong Soh, Yu Liu, Yue Xing Dong and Xin Zheng Lu .(2003). “Damage Model Based Reinforced-Concrete Element”, Journal of Materials in Civil Engineering, Vol. 15, No.4, August 1, 2003 (down-load PDF 336 kb) JOURNAL of ENGINEERING MECHANICS - ASCE 1. F. J. Vecchio and A. DeRoo .(1995). “Smeared-Crack Modeling of Concrete Tension

Splitting”, Journal of Engineering Mechanics, Vol. 121 / 6 (down-load PDF 1,309 kb)

2. In-Won Lee, Hyung-Jo Jung, Man-Cheol Kim, and Arthur R. Robinson .(1999).

“Eigensolution Method for Structures with Multiple or Close Eigenvalues”, Journal of Engineering Mechanics, Vol.125/ 11 (down-load 117 kb) 3. M. A. Bradford, B. Uy, Y. L. Pi. (2002). “In-plane Elastic Stability of Arches Under a Centra Concentrated Load”, Journal of Engineering Mechanics,Vol.128 / 7 (down-load PDF 188 kb) 4. Ferhun C. Caner; and Zdenek P. Bazant .(2002).”Lateral Confinement Needed to Suppress Softening of Concrete in Compression”, Journal of Engineering Mechanics, Vol.128 / 12 (down-load PDF 1,438 kb) 5. Lip H. Teh.(2005).”Spatial Rotation Kinematics and Flexural–Torsional Buckling”, Journal of Engineering Mechanics, Vol. 131 / 6 (down-load PDF 100 kb) JOURNAL of STRUCTURAL ENGINEERING - ASCE 1. Virote Boonyapinyo, Hitoshi Yamada and Toshio Miyata.(1994).”Wind-induced

2. 3. 4.

5.

Nonlinear Lateral-Torsional Buckling of Cable-Stayed Bridges, Journal of Structural Engineering Vol.120/2 (down-load PDF 968 kb) Abolghasem Saneinejad and Brian Hoobs .(1995). “Inelastic Design of Infilled Frames”, Journal of Structural Engineering, Vol.121/4 (down-load PDF 3,066 kb) M.S Pfeil and R.C. Batista.(1995). “Aerodynamic Stability Analysis of Cable-Stayed Bridges”, Journal of Structural Engineering, Vol.121/12 (down-load PDF 462 kb) Madan, A., Reinhorn, A.M., Mander, J.B., and Valles, R.E. (1997). “Modeling of Masonry Infill Panels for Structural Analysis”, Journal of Structural Engineering Vol.123/10 (down-load PDF 5,680 kb) Muhammad N. S. Hadi and Yoyong Arfiadi.(1998). “Optimum Desing of Absorber for MDOF Structures, Journal of Structural Engineering, Vol. 124/11 (down-load PDF 776 kb) Note : Dr. Yoyong Arfiadi sekarang aktif di Jurusan Teknik Sipil, Universitas Atmajaya Yogyakarta, paper tersebut ditulis pada saat beliau mengambil Ph.D program di Australia

6. Balaur S. Dhillon, James W. O’Malley III .(1999). “Interactive Design of Semirigid Steel

Frames”, Journal of Structural Engineering, May 1999 (down-load PDF 2,341 kb) 7. M.A. Polak and F.J. Vecchio .(1993). “Nonlinear Analysis of Reinforced-Concrete Shells”, Journal of Structural Engineering, Vol.119 / 12 (down-load PDF 1,281 kb) 8. Joseph M. Bracci, Sashi K. Kunnath and Andrei M. Reinhorn .(1997). “Seismic Performance and Retrofit Evaluation of Reinforced Concrete Structures”, Journal of Structural Enginering, Vol. 123 / 1 (down-load PDF 769 kb) 9. Suchart Limkatanyu and Enrico Spacone .(2002). “Reinforced Concrete Frame Element with Bond Interfaces II: State Determinations and Numerical Validation”, Journal of Structural Engineering, Vol. 128 / 3 (down-load PDF 158 kb) 10. Qing Quan Liang, Brian Uy, and Grant P. Steven . (2002). “Performance-Based Optimization for Strut-Tie Modeling of Structural Concrete”, Journal of Structural Engineering, Vol.128 / 6 ( down-load PDF 1,014 kb)

11. Mettupalayam V. Sivaselvan and Andrei M. Reinhorn .(2002). “Collapse Analysis: Large

Inelastic Deformations Analysis of Planar Frames”, Journal of StructuralEngineering, Vol. 128 / 12 (down-load PDF 184 kb) 12. F.J. Vecchio and W. Shim .(2004). “Experimental and Analytical Re-examination of Classic Concrete Beam Tests”, Journal of Structrual Engineering, Vol. 130 / 3 (download PDF 654 kb) 13. Jianguo Nie, Jiansheng Fan and C. S. Cai . (2004). “Stiffness and Deflection of Steel– Concrete Composite Beams under Negative Bending”, Journal of Structural Engineering, Vol. 130 / 11 (down-load PDF 145 kb) 14. Dimitrios Vamvatsikos and C. Allin Cornell . (2005). “Direct Estimation of Seismic Demand and Capacity of Multidegree-of-Freedom Systems through Incremental Dynamic Analysis of Single Degree of Freedom Approximation”, Journal of Structural Engineering, Vol. 131 / 4 ( down-load PDF 182 kb) 15. Tadeh Zirakian and Hossein Showkati. (2007). “Experiments on Distortional Buckling of I-Beams”, Journal of Structural Engineering, Vol. 133 / 7 (down-load PDF 355 kb) 16. Vu Phan, M. Saiid Saiidi, John Anderson and Hamid Ghasemi.(2007). “Near-Fault Ground Motion Effects on Reinforced Concrete Bridge Columns”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 289 kb) 17. Murat Dicleli and Anshu Mehta.(2007). “Efficient Energy Dissipating Steel-Braced Frame to Resist Seismic Loads”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 256 kb) 18. Feng Zhou, Khalid M. Mosalam and Masayoshi Nakashima.(2007). “Finite-Element Analysis of a Composite Frame under Large Lateral Cyclic Loading”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 313 kb) 19. K. A. Riederer and T. Haukaas.(2007). “Cost-Benefit Importance Vectors for Performance-Based Structural Engineering”, Journal of Structural Engineering, Vol. 133, No. 7 (down-load PDF 171 kb) 20. Thiru Aravinthan, and T. G. Suntharavadivel. (2007). “Effects of Existing Shear Damage on Externally Posttensioned Repair of Bent Caps”, Journal of Structural Engineering, Vol. 133, No. 11, November 1, 2007. (down-load PDF 559 kb) JOURNAL of BRIDGE ENGINEERING - ASCE 1. Uwe Starossek.(1996).”Cable-Stayed Bridge Concept for Longer Spans”, Journal of

Bridge Engineering, Vol.1, No.3 (down-load PDF 376 kb) 2. Sami W. Tabsh and Kalpana Sahajwani .(1997). “Approximate Analysis of Irregular

Slab-on-Girder Bridges”, Journal of Bridge Engineering,Vol. 2 / 1 (down-load PDF 614 kb) 3. Mounir E. Mabsout, Kassim M. Tarhini, Gerald R. Frederick and Charbel Tayar .(1997). “Finite-Element Analysis of Steel Girder Highway Bridges”, Journal of Bridge Engineering,Vol. 2 / 3 (down-load PDF 501 kb) 4. Eric M. Hines, David P. Billingtion .(1998). “Case Study of Bridge Design Competition”, Journal of Bridge Engineering, Vol.3, No.3 (down-load PDF 1,035 kb)

5. A. Zureick and R. Naqib .(1999). “Horizontally Curved Steel I Girders State of The Art

Analysis Methods”, Journal of Bridge Engineering, Vol. 4 / 1 (down-load PDF 115 kb) 6. Constantine C. Spyrakos, Emory L. Kemp,and Ramesh Venkatareddy.(1999).”Validated

Analysis Of Wheeling Suspension Bridge”, Journal of Bridge Engineering, Vol.4, No.1 (down-load PDF 185 kb) 7. Marco Rosignoli .(1999). “Prestressing Schemes For Incrementally Launched Bridges”, Journal of Bridge Engineering, Vol.4, No.2 (down-load PDF 233 kb) 8. Toorak Zokaie .(2000). “AASHTO-LRFD Live Load Distribution Specification”, Journal of Bridges Engineering,Vol. 5 / 2 (down-load PDF 241 kb) 9. K. E. Barth and D. W. White .(2000).”Inelastic Design of Steel I-Girder Bridges”, Journal of Bridge Engineering, Vol. 5 / 3 (down-load PDF 224 kb) 10. Brett A. McElwain and Jeffrey A. Laman .(2000). “Experimental Verification of Horizontally Curved I-Girder Bridge Behavior”, Journal of Bridge Engineering, Vol. 5, No. 4 (down-load PDF 189 kb) 11. Sami W. Tabsh and Muna Tabatabai.(2001).”Live Load Distribution In Girder Bridges Subject To Oversized Trucks”, Journal of Bridge Engineering, Vol.6, No.1 (down-load PDF 194 kb) 12. Hung-Shan Shu and Yang-Cheng Wang.(2001).”Stability Analysis Of Box-Girder CableStayed Bridges”, Journal of Bridge Engineering, Vol.6, No.1 (down-load PDF 140 kb) 13. Q. W. Zhang, T. Y. P. Chang, and C. C. Chang .(2001). “Finite-Element Model Updating for The Kap Shui Mun Cable-Stayed Bridge”, Journal of Bridge Engineering, Vol. 6 / 4 (down-load PDF 146 kb) 14. Gregor P. Wollmann.(2001).”Preliminary Analysis of Suspension Bridges”, Journal of Bridge Engineering, Vol.6, No.4 (down-load PDF 136 kb) 15. M. Schlaich .(2001). “Erection of Cable-Stayed Bridges Having Composite Decks With Precast Concrete Slabs”, Journal of Bridge Engineering, Vol. 6 / 5 (down-load PDF 93 kb) 16. Bruce A. Moulds .(2001). “Design Considerations for Aircraft Bridges”, Journal of Bridge Engineering, Vol. 6 / 6 (down-load PDF 188 kb) 17. Junsik Eom and Andrzej S. Nowak .(2001).”Live Load Distribution For Steel Girder Bridges”, Journal of Bridge Engineering, Vol.6, No.6 (down-load PDF 403 kb) 18. Zhong Liu, Fang Li, and W. M. Kim Roddis .(2002).”Analytic Model of Long-Span SelfShored Arch Bridge”,Journal of Bridge Engineering, Vol.7, No.1 (down-load PSDF 235 kb) 19. Khaled M. Sennah, and John B. Kennedy .(2002).”Literature Review in Analysis of BoxGirder Bridges”,Journal of Bridge Engineering, Vol.7, No.2 (down-load PDF 85 kb) 20. Ahmad M. Itani, Michael Bruneau, Lyle Carden and Ian G. Buckle .(2004). “Seismic Behavior of Steel Girder Bridge Superstructures”, Journal of Bridges Engineering,Vol. 9 / 3 (down-load PDF 608 kB) JOURNAL of ADVANCED CONCRETE TECHNOLOGY 1. Hajime Okamura and Masahiro Ouchi .(2003). “Self-Compacting Concrete”, Journal of

Advanced Concrete Technology, Vol.1 No.1 (down-load PDF 1,908 kb)

2. Shunsuke Otani .(2004). “Earthquake Resistant Design of Reinforced Concrete Buildings

- Past and Future”, Invited Paper, Journal of Advanced Concrete Technology Vol.2 No.1 (down-load PDF 288 kb) 3. Kiang Hwee Tan . (2004). “Design of Non-Prismatic RC Beams Using Strut-and-Tie Models”, Journal of Advanced Concrete Technology, Vol. 2 No.2 (down-load PDF 422 kb) 4. Tomohiro Miki and Junichiro Niwa . (2004). “Nonlinear Analysis of RC Structural Members Using 3D Lattice Model”, Journal of Advanced Concrete Technology, Vol. 2 No.3 (down-load PDF 1,257 kb) JOURNAL of STRUCTURAL ENGINEERING SOCIETY NEW ZEALAND John Butterworth .(2000). “Ductile Concentrically Braced Frames using Slotted Bolted Joints”, SESOC Journal Vol. 13 No.1 April 2000 (down-load PDF 131 kb) JOURNAL of WIND ENGINEERING and INDUSTRIAL AERODYNAMICS Toshio Miyata.(2003).”Historical view of long-span bridge aerodynamics”,Journal of Wind Engineering and Industrial Aerodynamics 91 (2003) 1393–1410 (down-load PDF 614 kb) MODERN of STEEL CONSTRUCTIONS 1. Kenneth J. Wright and Matthew A. Bunner .(1997). “High Strength Steel Reduces Truss

Costs: A new bridge across the Chelyan River in West Virginia utilized Gr.36, 50 and 70 steels”, Modern Steel Construction / October 1997 (down-load PDF 139 kb) 2. Steven A. Weinhold, P.E. .(1997). “Erection Engineering For Steel Bridge Superstructures”, Modern Steel Construction / October 1997 (down-load PDF 21 kb) 3. Michael E. Trunko .(1997). “Galvanizing Eliminates Repainting On Bridges : A turn-key operation specializes in designing, fabricating and erecting galvanized truss bridges, Modern Steel Construction / October 1997 (down load PDF 132 kb) 4. Lawrence G. Griffis .(2006). A Culture of Discipline: Structural engineers must approach their work with diligence and a great sense of responsibility to themselves, their firms, and society”, Modern Steel Construction / December 2006 (down-load PDF 91 kb)

PCI JOURNAL 1. M.J. Nigel Priestley, S. (Sri) Sritharan, James R. Conley, Stefano Pampanin. (1999).

“Preliminary Results and Conclusions From the PRESSS Five-Story Precast Concrete Test Building”, PCI JOURNAL November-December 1999 (down-load PDF 626 kb) 2. Sidney Freedman .(1999). “Loadbearing Architectural Precast Concrete Wall Panels”, PCI JOURNAL September-October 1999 (down-load PDF 1192 kb)

ROYAL ACADEMY of ENGINEERING Tony Fitzpatrick.(1991). “Linking London: The Millennium Bridge”,The Royal Academy of Engineering, Westminster, London, June 2001 (down-load PDF 799 kb) STRUCTURAL CONCRETE 1. F. J. Vecchio .(2001). “Non-linear finite element analysis of reinforced concrete: at the

crossroads ?”, Structural Concrete 2001 Vol.2 No. 4 (down-load PDF 1,228 kb) 2. Stefano Pampanin .(2003). “Alternative design philosophies and seismic response of precast concrete buildings”, Structural Concrete 2003 Vol.4 No.4 (down-load PDF 1,655 kb) . The author is one of the winners of the fib 2003 diplomas to younger engineers in the Research category 3. E. Caetano and A. Cunha.(2004). “Experimental and numerical assessment of the dynamic behaviour of a stress-ribbon footbridge”, Structural Concrete 2004 Vol.5,No.1 (down-load PDF 456 kb) 4. C. G. Papanicolaou and T. C. Triantafillou .(2004). “Analysis and minimum cost design of concrete sandwich panels under out-of-plane loading”, Structural Concrete 2004 Vol.5,No 1 (down-load PDF 437 kb) STRUCTURAL ENGINEERING INTERNATIONAL 1. Michel Virlogeux, Claude Servant, Jean-Marie Cremer,Jean-Pierre Martin, Marc

Buonomo.(2005). “Millau Viaduct, France”, Structural Engineering International 1/2005 (down-load PDF 415 k) 2. Federico M. Mazzolani.(2006). “Structural Applications of Aluminium in Civil Engineering”, Structural Engineering International 4/2006 (down-load PDF 266 k) THIN-WALLED STRUCTURES - ELSEVIER 1. K.F. Chung *, K.H. Ip.(2000).”Finite element modeling of bolted connections between

coldformed steel strips and hot rolled steel plates under static shear loading”, Engineering Structures 22 (2000) 1271–1284 (down-load PDF 1.53 Mb) 2. H.C. Ho, K.F. Chung .(2006). “Analytical prediction on deformation characteristics of lapped connections between cold-formed steel Z sections”, Thin-Walled Structures 44 (2006) 115-130 (down-load PDF 492 kb) 3. Tae Soo Kima, Hitoshi Kuwamura. (2007). “Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear”, Thin-Walled Structures 45 (2007) 407–421 (down-load PDF 1.07 Mb)

Steel Design Guide Series Column Base Plates Design of Column Base Plates John T. DeWolf Professor of Civil Engineering

University of Connecticut Storrs, Connecticut Some Practical Aspects of Column Base Selection David T. Bicker Vice President, Engineering The Berlin Steel Construction Company, Inc. Berlin, Connecticut

The book contain 60 pages, down-load PDF 970 kb This is the document #2 regarding the trick and tip for design low and medium-rise of steel building.

Design Guide for Low-and Medium-Rise Steel Buildings Horatio Allison, PE Consulting Engineer Dagsboro, Delaware

The book contain 53 pages , down-load PDF 769 kb **Document #3

Floor Vibrations Due to Human Activity Thomas M. Murray, PhD, P.E. Montague-Betts Professor of Structural Steel Design The Charles E. Via, Jr. Department of Civil Engineering Virginia Polytechnic Institute and State University Blacksburg, Virginia, USA David E. Allen, PhD Senior Research Officer Institute for Research in Construction National Research Council Canada Ottawa, Ontario, Canada Eric E. Ungar, ScD, P.E. Chief Engineering Scientist

Acentech Incorporated Cambridge, Massachusetts, USA

The book contain 73 pages, down-load 1,450 kb ** Document #4 **

Staggered Truss Framing Systems Neil Wexler, PE Wexler Associates Consulting Engineers, New York, NY Feng-Bao Lin, PhD, PE Polytechnic University Brooklyn, NY

The book contain 49 pages, down-load 681 kb

FEMA 232 : Homebuilders’ Guide to Earthquake-Resistant Design and Construction (download PDF ).

STANFORD UNIVERSITY PAPERS http://www.stanford.edu/group/rms/pubs.htm

Reference Code/Standard (direct link) http://www.4shared.com/dir/6805527/ed9582c/code-standard.html Reference shear wall (direct link) http://www.4shared.com/dir/6805546/2f84cf3c/Lecture.html

Civil Engineering 101 E-book collection

101 ebook |All PDF Format | RS | 13 files Aysen - Problem Solving in Soil Mechanics Autocad 2006 Manual Users Guide AutoCAD2007Bible Bridge Design Manual-Texas Department of transportation Bridge.Hydraulic.Design.(2000) BSP_VL4 Building Design and Construction Handbook Building Design and Construction Handbook(2) Chen & Liew Civil Engineering Handbook Civil Engineering Handbook(Second Edition) Civil engineering hydraulics- Essential theory with worked e cmaug2005

List of books : COMPOSITE MATERIALS HANDBOOKvol4 Composite Structures Of Steel And Concrete- Volume 1 (2Nd Ed Concrete Forwork Construction of buildings Volume 1 Construction Of Buildings Volume 2 Design Loads During Construction DESIGN OF HYDRAULIC GATES Engineering Structural Welding Engineer's Mini-Notebook FIDIC Finite Element Method - Boundary Element Method Finite-element-procedure-Bathe Fundamentals Handbook - Engineering Symbology, Prints, and Drawings 1 Fundamentals of Finite Element Analysis Fundamentals of wood design and engineering Handbook Handbook of Structural Engineering Handbook_of_Structural_Engineering Harrison___Nettleton_-_Advanced_Engineering_Dynamics__Arnold_1997__4AH Hydraulics Manual J.F.Doyle - Modern experimental stress analysis Lean Manufacturing And The Enviroment (Epa) LIQUID STORAGE TANK Manual for the design of reinforced concrete building struct MARINE STRUCTURAL DESIGN Mathematics-The Civil Engineering Handbook matlab_quickref MatlabNotes McGraw Hill - Dictionary of Engineering Mcgraw Hill - Project Management McGraw-Hill - Piping Handbook McGraw-Hill_-_Civil_Engineering_Formulas__2002__Tlf Mechanical Engineering Handbook (CRC Press) miscellaneous_recipes_001 Modern Manufacturing Multiresolution Green?s Function Methods for Interactive Simulation of Large-Scale Elastostatic Objects Non-linear Finite Element Analysis of Solids and Structures Vol.2 Numerical approximations of time domain boundary integral equation for wave propagation Olver P.J., Shakiban C. Applied mathematics (draft, 2004)(11 Patankar_Numerical_Heat_Transfer_and_Fluid_Flow

PLANNING AND DESIGN OF HYDROLECTRIC POWER PLANT STRUCTURES PORTLAND CEMENT Post-Tensioning Reinforced concrete analysis and design Residential_Structural_Design_Guide Sadd - Elasticity theory applications and numerics [butterworth heinemann 2004] 4AH SMITH, E. H. (1994). Mechanical Engineer's Reference Book (12t.) Soil engineering - testing, design, and remediation Soil_Mechanics___Foundations SPED_VL3 standard_handbook_of_engineering_calculations Steel designers manual 5th edition Stiffener Design for Beam-to-Column Connections strength of materials stress analysis of why branch Structural Mechanics of Buried Pipes Structural Steel Designer's Handbook (Brockenbrough & Merritt) TAYLOR, D. A. (1996). Introduction to Marine Engineering (2nd .) Teexas - Hydraulic Design Manual Time-dependent problems with the boundary integral equation TONG, L. (2002). 3D Fibre Reinforced Polymer Composites Transportation Eng Transportation Systems Planning Methods and Applications Vibration and Shock Handbook Vibration Simulation using MATLAB and ANSYS Vibrations Fundamentals and Practice WATSON, D. G. M. (1998). Practical Ship Design Welded Design - Theory and Practice Welding Metallurgy (Second Edition) Wind Loading of Structures WU, Y.-S. (2001). Practical Design of Ships and Other Floating S YUN, L. (2000). Theory and Design of Air Cushion Craft ZIENKIEWICZ, O. C. (2000). The Finite Element Method (5th ed.).) Zienkiewicz's Finite Element Book Code: http://rapidshare.com/files/128097847/Civil_Eng._Books_www.softarchive.net.pa rt01.rar http://rapidshare.com/files/128097851/Civil_Eng._Books_www.softarchive.net.pa rt02.rar http://rapidshare.com/files/128106863/Civil_Eng._Books_www.softarchive.net.pa rt03.rar http://rapidshare.com/files/128106870/Civil_Eng._Books_www.softarchive.net.pa rt04.rar http://rapidshare.com/files/128097802/Civil_Eng._Books_www.softarchive.net.pa rt05.rar

http://rapidshare.com/files/128103383/Civil_Eng._Books_www.softarchive.net.pa rt06.rar http://rapidshare.com/files/128102297/Civil_Eng._Books_www.softarchive.net.pa rt07.rar http://rapidshare.com/files/128108744/Civil_Eng._Books_www.softarchive.net.pa rt08.rar http://rapidshare.com/files/128109829/Civil_Eng._Books_www.softarchive.net.pa rt09.rar http://rapidshare.com/files/128108707/Civil_Eng._Books_www.softarchive.net.pa rt10.rar http://rapidshare.com/files/128107397/Civil_Eng._Books_www.softarchive.net.pa rt11.rar http://rapidshare.com/files/128102160/Civil_Eng._Books_www.softarchive.net.pa rt12.rar http://rapidshare.com/files/128102159/Civil_Eng._Books_www.softarchive.net.pa rt13.rar

Structural Foundation Designers' Manual

Structural Foundation Designers' Manual By W. G. Curtin, Gerry Shaw, Gary Parkinson, J. Golding, Norman Seward • • • • •

Publisher: Wiley-Blackwell Number Of Pages: 392 Publication Date: 2006-12-11 ISBN-10 / ASIN: 140513044X Product Description: This manual for civil and structural engineers aims to simplify as much as possible a complex subject which is often treated too theoretically, by explaining in a practical way how to provide uncomplicated, buildable and economical foundations It explains simply, clearly and with numerous worked examples how economic foundation design is achieved. It deals with both straightforward and difficult sites, following the process through site investigation, foundation selection and, finally, design



• • • •

The book includes chapters on many aspects of foundation engineering that most other books avoid including o filled and contaminated sites o mining and other man-made conditions features a step-by-step procedure for the design of lightweight and flexible rafts, to fill the gap in guidance in this much neglected, yet extremely economical foundation solution concentrates on foundations for building structures rather than the larger civil engineering foundations includes many innovative and economic solutions developed and used by the authors’ practice but not often covered in other publications provides an extensive series of appendices as a valuable reference source

For the Second Edition the chapter on contaminated and derelict sites has been updated to take account of the latest guidelines on the subject, including BS 10175. Elsewhere, throughout the book, references have been updated to take account of the latest technical publications and relevant British Standards PDF 7.6 Mb http://rapidshare.com/files/117227081/Structural_Foundation_DM.zip http://ifile.it/92uoxpj http://www.filefactory.com/file/95000b/ http://rapidshare.com/files/117169635/cbtionczxczxers_Manual_140513044X.rar.h tml

Metric Handbook, Third Edition

Metric Handbook, Third Edition By David Littlefield * Publisher: Architectural Press * Number Of Pages: 856 * Publication Date: 2008-01-08 * ISBN-10 / ASIN: 0750652810 * ISBN-13 / EAN: 9780750652810 * Product Description: Originally devised as a guide for converting from imperial to metric measurements, 'The Metric Handbook' has since been totally transformed into the major handbook of planning and design data for architects. This new edition has been updated to account of the most recent changes to regulation and practice in particular the increasing emphasis on environmental legislation - to meet the needs of the modern building design professional.

The Metric Handbook deals with all the principal building types from airports, factories and warehouses, offices shops and hospitals, to schools, religious buildings and libraries. For each type the book gives the basic design requirements and all the principal dimensional data, as well as succinct guidance on how to use the information and what regulations the designer may need to be aware of. As well as buildings the Metric Handbook deals with broader aspects of design such as materials, acoustics and lighting, and general design data on human dimensions and space requirements. The Metric Handbook is a unique authoritative reference for solving everyday planning problems. It has sold well over 100,000 copies worldwide to successive generations of architects and designers this is a book that truly belongs on every design office desk and drawing board. * THE tried and trusted source of information for all basic design data * Every important type of public and private building dealt with, from homes to hospitals, from law courts to laboratories * Well over 100,000 copies have been sold worldwide to successive generations of architects and designers Rar'd pdf , 49.3 mb http://rapidshare.com/files/132075366/0750652810.rar or http://www.filefactory.com/file/621ea9/n/0750652810_rar or http://ifile.it/dpn8gm2

Civil Engineering books (browse by category)

Theory of Structures Structural Engineering Structural Analysis Construction Engineering Reinforced Concrete Concrete Structures Soil Mechanics Design of Steel Structures Environmental Eng. Highway Engineering Foundation Engineering Civil Drawing Bridge Engineering Transportation Planning Geotechnical Engineering Materials of Construction Strength of Materials Traffic Engineering Irrigation $ Drainage Eng. Surveying & Topography Hydraulics

Photogrammetry Engineering Geology Design of pipeline Testing of Materials Project Management Sap Finite Elements

Building Design and Construction Handbook 6th edition link Design of Rainwater Storage Tanks for use in Developing Countries by Stephen Turner Department of Engineering University of Warwick 27th April 2000 http://mihd.net/hxfm03

Theatre Engineering and Stage Machinery

Theatre Engineering and Stage Machinery By Toshiro Ogawa * Publisher: Entertainment Technology Press Ltd * Number Of Pages: 308 * Publication Date: 2001-04-03 * ISBN-10 / ASIN: 1904031021 * ISBN-13 / EAN: 9781904031024

http://rs102l32.rapidshare.com/files..._Machinery.rar

Architecture - 100 eBooks

http://www.shareonall.com/architecturalthoughtthedesignprocessandandtheexpect anteye_juzs.rar http://www.shareonall.com/9780750662253_znge.rar http://www.shareonall.com/aw10_nbww.rar http://www.shareonall.com/0750668253_zttg.rar

http://www.shareonall.com/ArtofGothic_pwbr.rar http://www.shareonall.com/BuildingDesignandConstructionHandbook6thEdition_vhh w.zip http://www.shareonall.com/R20070913E_tzjk.rar http://www.shareonall.com/TheArchitectureofModernItalyIKirkPrinceton2005_imyz .rar http://www.shareonall.com/TheArchitectureofModernItalyIIKirkPrinceton2005_fjh l.rar http://www.shareonall.com/0750661747_oequ.rar http://www.shareonall.com/Ar-form-space-order-2007.part1_zkgg.rar http://www.shareonall.com/Ar-form-space-order-2007.part2_vpyh.rar http://www.shareonall.com/Ar-form-space-order-2007.part3_txfh.rar http://www.shareonall.com/Ar-form-space-order-2007.part4_cznc.rar http://www.shareonall.com/Ar-form-space-order-2007.part5_zfby.rar http://www.shareonall.com/Ar-form-space-order-2007.part6_ipxi.rar http://www.shareonall.com/Ar-form-space-order-2007.part7_yvsv.rar http://www.shareonall.com/Ar-form-space-order-2007.part8_hypa.rar http://www.shareonall.com/DynamicLoadingandDesignofStructures_wgbq.pdf http://www.shareonall.com/DesignHotels-ArchitecturalDesign_sloz.pdf http://www.shareonall.com/ArchitecturalDetailingFunctionConstructibilityAesthetics_cibm.pdf http://www.shareonall.com/ConstructionBuildingEnvelopeandInteriorFinishesData book_qeew.pdf http://www.shareonall.com/ArchitecturalRecordMagazine2007No.11_hacv.pdf http://www.shareonall.com/beautyandislamaestheticsinislamicart_devv.rar http://www.shareonall.com/9780750668224-0750668229.pdf_wfyq.rar http://www.shareonall.com/ThePhaidonAtlasofContemporaryWorldArchitecture.part 1_cbat.rar http://www.shareonall.com/ThePhaidonAtlasofContemporaryWorldArchitecture.part 2_crse.rar http://www.shareonall.com/ThePhaidonAtlasofContemporaryWorldArchitecture.part 3_nnna.rar http://www.shareonall.com/ThePhaidonAtlasofContemporaryWorldArchitecture.part 4_evnt.rar http://www.shareonall.com/ThePhaidonAtlasofContemporaryWorldArchitecture.part 5_yhed.rar http://www.shareonall.com/r20070913d_fncq.rar http://www.shareonall.com/time-saverstandardsforurbandesign007145361x_mbgl.pdf http://www.shareonall.com/HowDesignersThink0750660775_wmeb.rar http://www.shareonall.com/architectsguidetofengshui0750656069_royt.rar http://www.shareonall.com/AnArchitectsGuidetoFame075065967X_kbyx.rar http://www.shareonall.com/ArchitectureTechnologyandProcess0750637927_lsok.rar http://www.shareonall.com/swimmingpools4ed_cwip.rar http://www.shareonall.com/breakinggroundadventuresinlifeandarchitecture_asbx. rar http://www.shareonall.com/041595228x_uvjo.rar http://www.shareonall.com/9995516101vol1_evpy.rar http://www.shareonall.com/9995516101vol2_jylr.rar http://www.shareonall.com/BuildingwithEarth_iavq.rar http://www.shareonall.com/0750658495_hdwb.rar http://www.shareonall.com/0750659025_nddb.rar http://www.shareonall.com/0750660899_igwi.rar http://www.shareonall.com/0750661429_vpwc.rar http://www.shareonall.com/0750661755_xdwj.rar http://www.shareonall.com/0750666285_lbye.rar

http://www.shareonall.com/0750668180_bapt.rar http://www.shareonall.com/9780750664486_fogy.rar http://www.shareonall.com/9780750659345_qpyy.rar http://www.shareonall.com/0750665440_fzic.rar http://www.shareonall.com/0750665270_yffg.rar http://www.shareonall.com/0750664584_ovep.rar http://www.shareonall.com/0750662077_fwvo.rar http://www.shareonall.com/0750658320_xiao.rar http://www.shareonall.com/0750657642_wefj.rar http://www.shareonall.com/0750657294_mtav.rar http://www.shareonall.com/0750656050_hcep.rar http://www.shareonall.com/0750655437_lnzu.rar http://www.shareonall.com/0750654260_trgg.rar http://www.shareonall.com/0750654252_kdya.rar http://www.shareonall.com/0750653590_juoc.rar http://www.shareonall.com/0750653434_vyxg.rar http://www.shareonall.com/0750651644_nmgh.rar http://www.shareonall.com/0750648481_haqr.rar http://www.shareonall.com/0750642734_zbfn.rar http://www.shareonall.com/0750632755_brsx.rar http://www.shareonall.com/0750640820_aosx.rar http://www.shareonall.com/075065385X_yzbq.rar http://www.shareonall.com/075065693X_mset.rar http://www.shareonall.com/0271029773_mdjt.rar http://www.shareonall.com/075065130X_hsgj.rar http://www.shareonall.com/0750666579_elpm.rar http://www.shareonall.com/0750658975_uelw.rar http://www.shareonall.com/0750657170_cili.rar http://www.shareonall.com/0750656530_kclz.rar http://www.shareonall.com/0750655119_jmkv.rar http://www.shareonall.com/0750654503_ljkc.rar http://www.shareonall.com/0750653728_jckb.rar http://www.shareonall.com/0750652462_tcft.rar http://www.shareonall.com/0750649488_wxmg.rar http://www.shareonall.com/0750649046_knfe.rar http://www.shareonall.com/0750648902_afml.rar http://www.shareonall.com/0750647930_zxtx.rar http://www.shareonall.com/0750647701_plyk.rar http://www.shareonall.com/0750641029_cvlo.rar http://www.shareonall.com/ArchitectDrawingsworldfamousarchitects0750657197_li af.rar http://www.shareonall.com/0138552142_bmuf.rar http://www.shareonall.com/9780750680585-075068058x.pdf.tar_ovdq.gz http://www.shareonall.com/ArchitectsPocketBook_kxvy.rar http://www.shareonall.com/InteriorDesignHandbookofProfessionalPractice0071361 634_sxxp.rar http://www.shareonall.com/TSB2000_ydjk.zip http://www.shareonall.com/RoofingHandbook_batp.rar http://www.shareonall.com/075064785X_laph.rar http://www.shareonall.com/ConcreteandMasonryDatabook_hdza.rar http://www.shareonall.com/HowToBuildYourOwnUndergroundHome_ealv.rar http://www.shareonall.com/0750650826_ngpm.rar http://www.shareonall.com/0071460292_kimo.rar http://www.shareonall.com/0937426571_lwia.rar http://www.shareonall.com/seismicdesignhandbookallchapters_svws.pdf

http://www.shareonall.com/GFX-history_oqhl.pdf http://www.shareonall.com/ConstructionofMarineandOffshoreStructuresThirdEditi on_xnvs.rar http://www.shareonall.com/FS_mpnd.pdf http://www.shareonall.com/Leeuwen_chug.rar http://www.shareonall.com/9780231133043-0231133049_wrgi.ra

Architecture - 50 eBooks Architect's Drawings: A selection of sketches by world famous architects through history By Kendra Schank Smith * Publisher: Architectural Press * Number Of Pages: 224 * Publication Date: 2005-09-20 * ISBN / ASIN: 0750657197 http://www.shareonall.com/ArchitectD...57197_tisw.rar ================================= Introduction to Architectural Science: The Basis of Sustainable Design By Steven Szokolay * Publisher: Architectural Press * Number Of Pages: 320 * Publication Date: 2003-10 * ISBN / ASIN: 0750658495 * EAN: 9780750658492 http://www.shareonall.com/0750658495_ovsv.rar ================================= Introduction to Urban Housing Design: At Home in the City By Graham Towers * Publisher: Architectural Press * Number Of Pages: 384 * Publication Date: 2005-05-23 * ISBN / ASIN: 0750659025 * EAN: 9780750659024 http://www.shareonall.com/0750659025_vgoq.rar =================================

Laboratory Design Guide, Third Edition By Brian Griffin * Publisher: Architectural Press * Number Of Pages: 384 * Publication Date: 2004-10-06 * ISBN / ASIN: 0750660899 * EAN: 9780750660891 http://www.shareonall.com/0750660899_gdgb.rar ================================= Spaced Out: A Guide to Best Contemporary Urban Spaces in the UK By Rachel Tennant, Nicola Garmory, * Publisher: Architectural Press * Number Of Pages: 136 * Publication Date: 2005-04-15 * ISBN / ASIN: 0750661429 http://www.shareonall.com/0750661429_wdac.rar ================================= Reinventing the Workplace, Second Edition By John Worthington * Publisher: Architectural Press * Number Of Pages: 192 * Publication Date: 2005-12-17 * ISBN / ASIN: 0750661755 http://www.shareonall.com/0750661755_sycy.rar ================================= Urban Design: A typology of Procedures and Products. Illustrated with over 50 Case Studies By Jon Lang * Publisher: Architectural Press * Number Of Pages: 400 * Publication Date: 2005-10-18 * ISBN / ASIN: 0750666285 http://www.shareonall.com/0750666285_nmnl.rar ================================= Managing Quality in Architecture By Charles Nelson * Publisher: Architectural Press

* Number Of Pages: 320 * Publication Date: 2006-07-13 * ISBN / ASIN: 0750668180 * EAN: 9780750668187 http://www.shareonall.com/0750668180_tvyt.rar ================================= What Designers Know By Bryan Lawson * Publisher: Architectural Press * Number Of Pages: 144 * Publication Date: 2004-11-08 * ISBN / ASIN: 0750664487 http://www.shareonall.com/9780750664486_sfwl.rar ================================= Design First: Design-based Planning for Communities By David Walters, Linda Brown, * Publisher: Architectural Press * Number Of Pages: 304 * Publication Date: 2004-06-03 * ISBN / ASIN: 0750659343 http://www.shareonall.com/9780750659345_wreb.rar ================================= Architecture in a Climate of Change By Peter Smith * Publisher: Architectural Press * Number Of Pages: 192 * Publication Date: 2005-05-02 * ISBN / ASIN: 0750665440 http://www.shareonall.com/0750665440_axwx.rar ================================= Structure as Architecture: A Source Book for Architects and Structural Engineers By Andrew Charleson * Publisher: Architectural Press * Number Of Pages: 256 * Publication Date: 2005-08-19 * ISBN / ASIN: 0750665270

* EAN: 9780750665278 http://www.shareonall.com/0750665270_vtpr.rar ================================= Inclusive Urban Design: Streets For Life By Elizabeth Burton, Lynne Mitchell, * Publisher: Architectural Press * Number Of Pages: 224 * Publication Date: 2006-04-03 * ISBN / ASIN: 0750664584 * EAN: 9780750664585 http://www.shareonall.com/0750664584_bsow.rar ================================= Urban Design: Green Dimensions, Second Edition By J C Moughtin, Peter Shirley, * Publisher: Architectural Press * Number Of Pages: 272 * Publication Date: 2005-02-11 * ISBN / ASIN: 0750662077 http://www.shareonall.com/0750662077_aqop.rar ================================= Architectural Tiles: Conservation and Restoration By Lesley Durbin * Publisher: Butterworth-Heinemann * Number Of Pages: 240 * Publication Date: 2004-12-30 * ISBN / ASIN: 0750658320 http://www.shareonall.com/0750658320_moql.rar ================================= The Portfolio: An Architectural Student's Handbook (Architectural Students Handbooks) By Katerina Ruedi Ray, Lesley Lokko, Igor Marjanovic, * Publisher: Architectural Press * Number Of Pages: 148 * Publication Date: 2003-06-12 * ISBN / ASIN: 0750657642

http://www.shareonall.com/0750657642_unsj.rar ================================= Law and Practice for Architects By Robert Greenstreet, Karen Greenstreet, Brian Schermer, * Publisher: Architectural Press * Number Of Pages: 160 * Publication Date: 2005-04-19 * ISBN / ASIN: 0750657294 * EAN: 9780750657297 http://www.shareonall.com/0750657294_rvdv.rar ================================= Consensus Design: Socially inclusive process By Christopher Day, Rosie Parnell, * Publisher: Architectural Press * Number Of Pages: 222 * Publication Date: 2002-12-11 * ISBN / ASIN: 0750656050 http://www.shareonall.com/0750656050_adlp.rar ================================= Continuous Productive Urban Landscapes: Designing Urban Agriculture for Sustainable Cities By * Publisher: Architectural Press * Number Of Pages: 304 * Publication Date: 2005-04-13 * ISBN / ASIN: 0750655437 * EAN: 9780750655439 http://www.shareonall.com/0750655437_raqj.rar ================================= Children's Spaces By * Publisher: Architectural Press * Number Of Pages: 256 * Publication Date: 2005-09-30 * ISBN / ASIN: 0750654260 * EAN: 9780750654265

http://www.shareonall.com/0750654260_xzwi.rar ================================= Beginnings - Charles Rennie Mackintosh's Early Sketches By Elaine Grogan * Publisher: Architectural Press * Number Of Pages: 177 * Publication Date: 2002-12 * ISBN / ASIN: 0750654252 * EAN: 9780750654258 http://www.shareonall.com/0750654252_sjvo.rar ================================= Spirit and Place By Christopher Day * Publisher: Architectural Press * Number Of Pages: 264 * Publication Date: 2002-01-23 * ISBN / ASIN: 0750653590 * EAN: 9780750653596 http://www.shareonall.com/0750653590_aybw.rar ================================= Architect's Guide to Running a Job, Sixth Edition By Ronald Green * Publisher: Architectural Press * Number Of Pages: 176 * Publication Date: 2001-08-15 * ISBN / ASIN: 0750653434 * EAN: 9780750653435 http://www.shareonall.com/0750653434_drtg.rar ================================= New Architecture and Technology By Gyula Sebestyen, Christopher Pollington, * Publisher: Architectural Press * Number Of Pages: 288 * Publication Date: 2002-12 * ISBN / ASIN: 0750651644 * EAN: 9780750651646

http://www.shareonall.com/0750651644_zqff.rar ================================= Victorian Houses and their Details By Helen Long * Publisher: Architectural Press * Number Of Pages: 144 * Publication Date: 2002-01-23 * ISBN / ASIN: 0750648481 * EAN: 9780750648486 http://www.shareonall.com/0750648481_tirk.rar ================================= Urban Design: Ornament and Decoration, Second Edition (Urban Design) By J C Moughtin, Taner Oc, Steven Tiesdell, * Publisher: Architectural Press * Number Of Pages: 146 * Publication Date: 1999-10-05 * ISBN / ASIN: 0750642734 * EAN: 9780750642736 http://www.shareonall.com/0750642734_gxjt.rar ================================= Space Grid Structures By John Chilton * Publisher: Architectural Press * Number Of Pages: 180 * Publication Date: 1999-12-28 * ISBN / ASIN: 0750632755 * EAN: 9780750632751 http://www.shareonall.com/0750632755_gwfr.rar ================================= Lighting Modern Buildings By Derek Phillips * Publisher: Architectural Press * Number Of Pages: 248 * Publication Date: 2000-08-07 * ISBN / ASIN: 0750640820 * EAN: 9780750640824

http://www.shareonall.com/0750640820_uxin.rar ================================= Inclusive Urban Design: Public Toilets, First Edition By Clara Greed * Publisher: Architectural Press * Number Of Pages: 256 * Publication Date: 2003-01-12 * ISBN / ASIN: 075065385X * EAN: 9780750653855 http://www.shareonall.com/075065385X_pfhc.rar ================================= Transport Terminals and Modal Interchanges By Christopher Blow * Publisher: Architectural Press * Number Of Pages: 192 * Publication Date: 2005-03-09 * ISBN / ASIN: 075065693X http://www.shareonall.com/075065693X_qacn.rar ================================= Together at the Table: Sustainability And Sustenance in the American Agrifood System (Rural Studies) By Patricia Allen * Publisher: Pennsylvania State University Press * Number Of Pages: 260 * Publication Date: 2007-05-30 * ISBN / ASIN: 0271029773 http://www.shareonall.com/0271029773_atvj.rar ================================= Lighting by Design By Christopher Cuttle * Publisher: Architectural Press * Number Of Pages: 224 * Publication Date: 2003-05-07 * ISBN / ASIN: 075065130X * EAN: 9780750651301 http://www.shareonall.com/075065130X_uvdd.rar

================================= Built to Meet Needs: Cultural Issues in Vernacular Architecture By Paul Oliver * Publisher: Architectural Press * Number Of Pages: 480 * Publication Date: 2006-10-17 * ISBN / ASIN: 0750666579 * EAN: 9780750666572 http://www.shareonall.com/0750666579_yozw.rar ================================= Tony Hunt's Structures Notebook, Second Edition By Tony Hunt * Publisher: Architectural Press * Number Of Pages: 96 * Publication Date: 2003-06-30 * ISBN-10 / ASIN: 0750658975 * ISBN-13 / EAN: 9780750658973 http://www.shareonall.com/0750658975_rwgi.rar ================================= Urban Design: Street and Square, Third Edition By J C Moughtin * Publisher: Architectural Press * Number Of Pages: 320 * Publication Date: 2003-04 * ISBN / ASIN: 0750657170 * EAN: 9780750657174 http://www.shareonall.com/0750657170_dufi.rar ================================= Portable Architecture By Robert Kronenburg * Publisher: Architectural Press * Number Of Pages: 288 * Publication Date: 2003-11-18 * ISBN / ASIN: 0750656530 * EAN: 9780750656535 http://www.shareonall.com/0750656530_rqor.rar

================================= History of Architectural Conservation (CONSERVATION AND MUSEOLOGY) By Jukka Jokilehto * Publisher: Butterworth-Heinemann * Number Of Pages: 368 * Publication Date: 2002-03-06 * ISBN / ASIN: 0750655119 * EAN: 9780750655118 http://www.shareonall.com/0750655119_rchr.rar ================================= Ecology of Building Materials By Bjorn Berge * Publisher: Architectural Press * Number Of Pages: 480 * Publication Date: 2001-12-15 * ISBN / ASIN: 0750654503 * EAN: 9780750654500 http://www.shareonall.com/0750654503_pifk.rar ================================= Virtual Reality and the Built Environment By Jennifer Whyte * Publisher: Architectural Press * Number Of Pages: 160 * Publication Date: 2002-09-24 * ISBN / ASIN: 0750653728 * EAN: 9780750653725 http://www.shareonall.com/0750653728_xmqu.rar ================================= Language of Space By Bryan Lawson * Publisher: Architectural Press * Number Of Pages: 272 * Publication Date: 2001-12-05 * ISBN / ASIN: 0750652462 * EAN: 9780750652469

http://www.shareonall.com/0750652462_ndrn.rar ================================= Taking Shape: A New Contract Between Architecture and Nature By Susannah Hagan * Publisher: Architectural Press * Number Of Pages: 240 * Publication Date: 2001-03-19 * ISBN / ASIN: 0750649488 * EAN: 9780750649483 http://www.shareonall.com/0750649488_jkeh.rar ================================= Ecohouse: A Design Guide By Susan Roaf, Manuel Fuentes, Stephanie Thomas, * Publisher: Architectural Press * Number Of Pages: 352 * Publication Date: 2001-06-20 * ISBN / ASIN: 0750649046 http://www.shareonall.com/0750649046_vuqt.rar ================================= Lit Interior By William J Fielder, Frederick H Jones, * Publisher: Architectural Press * Number Of Pages: 160 * Publication Date: 2002-01-16 * ISBN / ASIN: 0750648902 * EAN: 9780750648905 http://www.shareonall.com/0750648902_kqtm.rar ================================= Structure and Architecture, Second Edition By ANGUS J MACDONALD * Publisher: Architectural Press * Number Of Pages: 164 * Publication Date: 2001-04-10 * ISBN / ASIN: 0750647930 http://www.shareonall.com/0750647930_afrt.rar

================================= Crit - An Architectural Student's Handbook By Charles Doidge, Rachel Sara, Rosie White, * Publisher: Architectural Press * Number Of Pages: 117 * Publication Date: 2000-09-19 * ISBN / ASIN: 0750647701 * EAN: 9780750647700 http://www.shareonall.com/0750647701_nkwx.rar ================================= Urban Design: Method and Techniques (Urban Design) By Rafael Cuesta, Christine Sarris, Paola Signoretta, * Publisher: Butterworth-Heinemann * Number Of Pages: 195 * Publication Date: 1999-09 * ISBN / ASIN: 0750641029 * EAN: 9780750641029 http://www.shareonall.com/0750641029_ryyb.rar

The 50 ARCHITECTURE Ebooks RS links http://rapidshare.com/files/81656078/ArchitectDrawingsworldfamousarchitects07 50657197.rar http://rapidshare.com/files/81655737/0750658495.rar http://rapidshare.com/files/81655482/0750659025.rar http://rapidshare.com/files/81657974/0750660899.rar http://rapidshare.com/files/81657337/0750661429.rar http://rapidshare.com/files/81657198/0750661755.rar http://rapidshare.com/files/81656863/0750666285.rar http://rapidshare.com/files/81656499/0750668180.rar http://rapidshare.com/files/81656152/9780750664486.rar http://rapidshare.com/files/81659554/9780750659345.rar http://rapidshare.com/files/81659187/0750665440.rar http://rapidshare.com/files/81658820/0750665270.rar http://rapidshare.com/files/81658445/0750664584.rar http://rapidshare.com/files/81658298/0750662077.rar http://rapidshare.com/files/81660361/0750658320.rar http://rapidshare.com/files/81660879/0750657642.rar http://rapidshare.com/files/81663699/0750657294.rar http://rapidshare.com/files/81663548/0750656050.rar http://rapidshare.com/files/81663409/0750655437.rar http://rapidshare.com/files/81662912/0750654260.rar http://rapidshare.com/files/81662544/0750654252.rar http://rapidshare.com/files/81662012/0750653590.rar http://rapidshare.com/files/81661419/0750653434.rar

http://rapidshare.com/files/81661302/0750651644.rar http://rapidshare.com/files/81667163/0750648481.rar http://rapidshare.com/files/81665755/0750642734.rar http://rapidshare.com/files/81665570/0750632755.rar http://rapidshare.com/files/81665277/0750640820.rar http://rapidshare.com/files/81664945/075065385X.rar http://rapidshare.com/files/81664413/075065693X.rar http://rapidshare.com/files/81664016/0271029773.rar http://rapidshare.com/files/81666862/075065130X.rar http://rapidshare.com/files/81667611/0750666579.rar http://rapidshare.com/files/81667630/0750658975.rar http://rapidshare.com/files/81668486/0750657170.rar http://rapidshare.com/files/81670999/0750656530.rar http://rapidshare.com/files/81669386/0750655119.rar http://rapidshare.com/files/81668934/0750654503.rar http://rapidshare.com/files/81668515/0750653728.rar http://rapidshare.com/files/81670772/0750652462.rar http://rapidshare.com/files/81671536/0750649488.rar http://rapidshare.com/files/81672521/0750649046.rar http://rapidshare.com/files/81673131/0750648902.rar http://rapidshare.com/files/81674334/0750647930.rar http://rapidshare.com/files/81674477/0750647701.rar http://rapidshare.com/files/81675434/0750641029.rar

INTERNATIONAL ROAD MAINTENANCE HANDBOOK mihd

INTERNATIONAL ROAD MAINTENANCE

HANDBOOK mihd

INTERNATIONAL ROAD MAINTENANCE HANDBOOK

mihd

Vibration of Solids and Structures Under Moving Loads By Ladislav Fryba Publisher: Thomas Telford Ltd Number Of Pages: 500 Publication Date: 1999-05-01 ISBN-10 / ASIN: 0727727419 ISBN-13 / EAN: 9780727727411

http://rapidshare.com/files/12145320...ving_Loads.rar 24849 KB

Precast Prestressed Concrete Parking Structures: Recommended Practice for Design and Construction By Pci Committee On Parking Marketing & Pro Publisher: Precast/Prestressed Concrete Institute Number Of Pages: 1 Publication Date: 1997-01 ISBN-10 / ASIN: 0937040584 ISBN-13 / EAN: 9780937040584

44,733 MB http://www.4shared.com/file/20621897...tures.html?s=1 http://www.filefactory.com/file/9559a7/ http://rapidshare.com/files/119572421/ParkStr.zip.html

http://depositfiles.com/files/5734869 http://w13.easy-share.com/1700522419.html

Theories and Applications of Plate Analysis: Classical Numerical and Engineering Methods By Rudolph Szilard Publisher: Wiley Number Of Pages: 1056 Publication Date: 2004-01-02 ISBN-10 / ASIN: 0471429899 ISBN-13 / EAN: 9780471429890 Product Description: This book by a renowned structural engineer offers comprehensive coverage of both static and dynamic analysis of plate behavior, including classical, numerical, and engineering solutions. It contains more than 100 worked examples showing step by step how the various types of analysis are performed

9 MB Rar'd PDF http://rapidshare.com/files/11716531...29899.rar.html http://ifile.it/6mqshl3 http://www.filefactory.com/file/415167

The Aboveground Steel Storage Tank Handbook Industrial Health & Safety By Brian D. Digrado, Gregory A. Thorp Publisher: Wiley Number Of Pages: 350 Publication Date: 1995-03 ISBN-10 / ASIN: 047128629X ISBN-13 / EAN: 9780471286295 Product Description: The Aboveground Steel Storage Tank Handbook I like the summary of regulations in conjunction with industry standards and products. Usually a book covers one or the other. — Wayne Geyer, Executive Vice-President, Steel Tank Institute I think this is a valuable text in that it does a very good job presenting the two types of ASTs. —Darryl J. Butkos, Hydrogeologist and Environmental Engineer The U.S. aboveground storage tank (AST) market will approach $2.0 billion in 1995 and has an annual growth rate of approximately 5 percent. Shop-built ASTs have proliferated over the last 10 years and are replacing the underground tanks that have caused a large percentage of groundwater contamination. Larger field-erected tanks are now found at almost every industrial facility because of their greater reliability and the lessened risk of environmental spills. The Aboveground Steel Storage Tank Handbook discusses the myriad of regulations, codes, and manufacturing standards and shows how they are intertwined. It is the first handbook on aboveground storage tanks that explains the unique differences between field-erected ASTs and shop-built ASTs. The authors have divided the Handbook into four easyto-understand sections: Markets, Regulations, Standards, and Products. Anyone who finds himself or herself working through the maze of the AST compliance paperwork will find this book to be a great benefit as a single-source reference guide.

rar (53118 KB)

http://rapidshare.com/files/11716672...8629X.rar.html http://ifile.it/1b65kow

The Wiley Dictionary of Civil Engineering and Construction (Wiley Professional) By L. F. Webster • • • • •

Publisher: Wiley Number Of Pages: 688 Publication Date: 1997-04-10 ISBN-10 / ASIN: 0471181153 ISBN-13 / EAN: 9780471181156

Product Description: The Wiley Dictionary of Civil Engineering and Construction provides comprehensive coverage of a broad range of technical disciplines. The definitions are designed to be of use to professionals in architecture, engineering, surveying, building, construction, forestry, mining, and public works. Entries include terms, concepts, names, abbreviations, tools, and techniques common to these disciplines, and virtually all terms and their functions were supplied by working professionals and experts in each field. More than 30,000 definitions and descriptions, including many that are not covered in other dictionaries • • •

Written with the support and assistance of nearly 100 manufacturers, trade associations, government agencies, and specialists All terms arranged alphabetically; many grouped according to logical common topics; thoroughly cross-referenced All weights, volumes, and spatial dimensions presented in both metric and nonmetric values (conversion factors included).

The Wiley Dictionary of Civil Engineering and Construction is an indispensable resource for civil engineers, contractors and subcontractors, architects, construction administrators, consultants, and students. It also offers assistance to professionals without technical training who need to become familiar with this terminology, including bankers, attorneys, insurers, regulators, and inspectors. Rar'd PDF 52 MB

http://rapidshare.com/files/117167944/cbfCivilEngineeringandConstruction_0471 181153.rar.html http://ifile.it/x9ku5ib http://www.filefactory.com/file/84b139/

Airport Engineering By Norman J. Ashford, Paul H. Wright • • • • •

• • • • • • • •

Publisher: Wiley-Interscience Number Of Pages: 536 Publication Date: 1992-02 ISBN-10 / ASIN: 0471527556 Product Description: This new revised Third Edition of Airport Engineering, the basic classroom text for airport planning and design, shows professionals and students such key essentials as: The structure and organization of air transport Forecasting of air transport demand, using both traditional and new methods Airport systems planning Airport master planning Air traffic control, lighting, and signing Airport capacity and configuration Passenger terminal Air cargo facilities

• • •

Airport access Designing for safety Environmental impact of airports

Reflecting the latest FAA, ICAO, and IATA recommendations and guidelines, and mirroring the changing climate of air travel in the 1990s, Airport Engineering, Third Edition is the single most informative guide to mastering the state of the art in airport engineering and design. And also by the same authors… Transportation Engineering Planning and Design Third Edition Paul H. Wright and Norman Ashford This book gives a balanced treatment of all modes of transportation —highways, railways and guideways, pipelines, airports, and ports and harbors. Transportation Engineering, Third Edition is divided into six parts: • • • • • •

Part 1—Introduces the transportation system of the United States Part 2—Deals with the operation and control of the vehicles that use the physical transport systems Part 3—Examines transportation planning Part 4—Explains the design of land transportation facilities Part 5—Describes the planning procedures and design criteria for air transportation facilities Part 6—Covers water transportation facilities

Complete with an excellent list of references at the end of each chapter for readers who waist to study a transportation problem in greater detail, Transportation Engineering, Third Edition is the definitive textbook for students taking undergraduate transportation courses in civil engineering and city planning. 1989 (0 471-83874-8) 784 pp Rar'd PDF 74 MB http://rapidshare.com/files/117169179/cbng_0471527556.rar.html http://ifile.it/vgx49cq http://www.filefactory.com/file/69e715/

Design of Seismic Isolated Structures: From Theory to Practice By Farzad Naeim, James M. Kelly • • • • • •

Publisher: Wiley Number Of Pages: 304 Publication Date: 1999-03-11 ISBN-10 / ASIN: 0471149217 ISBN-13 / EAN: 9780471149217 Product Description: Complete, practical coverage of the evaluation, analysis, and design and code requirements of seismic isolation systems. Based on the concept of reducing seismic demand rather than increasing the earthquake resistance capacity of structures, seismic isolation is a surprisingly simple approach to earthquake protection. However, proper application of this technology within complex seismic design code requirements is both complicated and difficult.

Design of Seismic Isolated Structures provides complete, up-to-date coverage of seismic isolation, complete with a systematic development of concepts in theory and practical application supplemented by numerical examples. This book/CD-ROM set helps design professionals navigate and understand the ideas and procedures involved in the analysis, design, and development of specifications for seismic isolated structures. It also provides a framework for satisfying code requirements while retaining the favorable cost-effective and damage control aspects of this new technology. An indispensable resource for practicing and aspiring engineers and architects, Design of Seismic Isolated Structures includes: * Isolation system components. * Complete coverage of code provisions for seismic isolation. * Mechanical characteristics and modeling of isolators. * Buckling and stability of elastomeric isolators. * Examples of seismic isolation designs. * Specifications for the design, manufacture, and testing of isolation devices. rar (14981 KB) http://rapidshare.com/files/117169503/cbsolatedStructuresFromTheorytoPractice _0471149217.rar.html http://ifile.it/wxsghrn

Structural Wood Design: A Practice-Oriented Approach By Abi Aghayere, Jason Vigil • • • • • •

Publisher: Wiley Number Of Pages: 416 Publication Date: 2007-07-30 ISBN-10 / ASIN: 0470056789 ISBN-13 / EAN: 9780470056783 Product Description A simple, practical, and concise guide to timber design To fully understand structural design in wood, it is not sufficient to consider the individual components in isolation. Structural Wood Design: A Practice-Oriented Approach Using the ASD Method offers an integrative approach to structural wood design that considers the design of the individual wood members in the context of the complete wood structure so that all of the structural components and connectors work

• • • • • • • • • •

together in providing strength. Holistic, practical, and code-based, this text provides the reader with knowledge of all the essentials of structural wood design: Wood structural elements and systems that occur in wood structures Structural loads—dead, live, snow, wind, and seismic—and how to calculate loads acting on typical wood structures Glued-laminated lumber and allowable stresses for sawn lumber and Glulam The design and analysis of joists and girders Floor vibrations The design of wood members subjected to axial and bending loads Roof and floor sheathing and horizontal diaphrams Exterior wall sheathing and wood shear walls The design of connections and how to use the connection capacity tables in the NDS code Several easy-to-use design aids for the preliminary sizing of joists, studs, and columns

In keeping with its hallmark holistic and practice-oriented approach, the book culminates in a complete building design case study that brings all the elements together in a total building system design. Conforming throughout to the 2005 National Design Specification (NDS) for Wood, Structural Wood Design will prepare students for applying the fundamentals of structural wood design to typical projects, and will serve as a handy resource for practicing engineers, architects, and builders in their everyday work. PDF | 11,5 Mb http://rapidshare.com/files/117221288/Structural_Wood_Design.zip http://www.filefactory.com/file/97df75/ http://ifile.it/5kliu2x http://rapidshare.com/files/117169372/cbsignAPracticeOrientedApproachUsingtheASDMethod_0470056789.ra

Advanced Analysis and Design of Steel Frames By Gou-Qiang Li, Jin-Jin Li • • • • • • •

Publisher: Wiley Number Of Pages: 384 Publication Date: 2007-06-15 ISBN-10 / ASIN: 0470030615 ISBN-13 / EAN: 9780470030615 Product Description Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability evaluation of structural systems to advanced analysis of steel frames, and ensures that the steel frame design described is founded on

• • • • •

system reliability. Important features of the this book include: fundamental equations governing the elastic and elasto-plastic equilibrium of beam, sheer-beam, column, joint-panel, and brace elements for steel frames; analysis of elastic buckling, elasto-plastic capacity and earthquake-excited behaviour of steel frames; background knowledge of more precise analysis and safer design of steel frames against gravity and wind, as well as key discussions on seismic analysis. theoretical treatments, followed by numerous examples and applications; a review of the evolution of structural design approaches, and reliability-based advanced analysis, followed by the methods and procedures for how to establish practical design formula.

Advanced Design and Analysis of Steel Frames provides students, researchers, and engineers with an integrated examination of this core civil and structural engineering topic. The logical treatment of both advanced analysis followed by advanced design makes this an invaluable reference tool, comprising of reviews, methods, procedures, examples, and applications of steel frames in one complete volume http://rapidshare.com/files/117263950/Design_of_Steel_Frames.zip http://ifile.it/dxt2p5g http://www.filefactory.com/file/3c4963/ http://rapidshare.com/files/117164224/cbandczxczxofSteelFrames_0470030615.rar .html

Lightweight Sandwich Construction By J. M. Davies • • • • •

Publisher: Wiley-Blackwell Number Of Pages: 384 Publication Date: 2001-07-23 ISBN-10 / ASIN: 0632040270 Product Description Sandwich panels are being used increasingly as the cladding of buildings like factories, warehouses, cold stores and retail sheds. This is because they are light in weight, thermally efficient, aesthetically attractive and can be easily handled and erected. However, to date, an authoritative book on the subject was lacking. This new reference work aims to fill that gap. The designer, specifier and manufacturer of sandwich panels all require a great deal of

information on a wide range of subjects. This book was written by a group of European experts under the editorship of a UK specialist in lightweight construction. It provides guidance on * materials used in manufacture * thermal efficiency and air- and water-tightness * acoustic performance * performance in fire * durability * special problems of sandwich panels in cold stores and chill rooms * architectural and aesthetic considerations * structural design at the ultimate and serviceability limit states * additional structural considerations including fastenings, the effect of openings and the use of sandwich panels as load-bearing walls * test procedures The book concludes with some numerical design examples and is highly illustrated throughout PDF - 4.6 Mb http://rapidshare.com/files/117224626/Lightweight_Sandwich_Construction.zip http://ifile.it/dglp9oq http://rapidshare.com/files/117166431/cbichConstruction_0632040270.rar.html

Ground Anchors and Anchored Structures By Petros P. Xanthakos • • • • •

Publisher: Wiley-Interscience Number Of Pages: 704 Publication Date: 1991-01-02 ISBN-10 / ASIN: 0471525200 Product Description: Treating anchorages as a direct application of the laws of statics and the theories governing the transfer of load, this book focuses on designs that are safe and reasonably priced. It is divided into two parts. Following a general introduction in the first chapter, Part One goes on to explore anchor systems, components, installation and construction details. Presents special anchor systems such as extractable, compression-type, multibell, and regroutable anchors. Analyzes the transfer of load and its relation to failure modes and anchor load capacity; deals with design considerations; covers mechanisms and types of corrosion; and details anchor stressing, testing programs, and evaluation standards. Part Two considers uses and applications and design aspects of anchored structures; presents design examples of practical value and reasonable simplicity; and incorporates examples and case histories.

http://rapidshare.com/files/117237653/Ground_Anchors_and_Anchored_Structures. zip http://ifile.it/m9ev8z4 http://rapidshare.com/files/117164838/cbAnchoredStructures_0471525200.rar.html

Timber Designers' Manual By E. C. Ozelton, J. A. Baird • • • •

Publisher: Wiley-Blackwell Number Of Pages: 560 Publication Date: 2006-10-27 ISBN-10 / ASIN: 1405146710

http://rapidshare.com/files/117242638/Timber_Designers__Manual.zip http://www.filefactory.com/file/bee778/ http://ifile.it/qgbyikt http://rapidshare.com/files/117166454/cbManual_1405146710.rar.html

Earthquake Engineering: Application to Design By Charles K. Erdey • • • • •

Publisher: Wiley Number Of Pages: 448 Publication Date: 2007-01-09 ISBN-10 / ASIN: 0470048433 Product Description Learn to design code-compliant, earthquake-resistant structures with this practical guide Earthquake Engineering demonstrates how to design structural members and joints for seismic resistance. The text guides readers through dozens of structural designs, documenting how to perform each step, make the necessary calculations, and adhere to relevant design codes. Most other texts on seismic design focus on theory and the construction of idealized structures; this text is a radical departure, presenting actual tested design methodologies that protect structures from the devastation of earthquakes.

All the design methods presented by the author comply with the current U.S. building codes. References to these codes are provided throughout the text, helping readers understand how they are integrated into an overall structural design. Everything readers need to create sound designs, from analysis to design implementation, is provided, including: * Dozens of worked problems throughout the text * Complete reference chapters dedicated to matrices, differential equations, and numerical analysis * Latest results of ongoing seismic research, including how these studies are likely to influence future design projects * The latest 2006 IBC, highlighting significant variations from the 2000 and 2003 editions of the code * Detailed coverage of seismic design for steel moment-resisting frame structures (SMRF), as well as braced-frame steel, concrete, masonry, and wood-framed structures This text, with its many worked problems, is ideal for upper-level undergraduates and graduate students. Now that the seismic engineering provisions of the IBC Code apply to the entire United States, this text should also guide practicing engineers not yet exposed to seismic design in designing code-compliant, earthquake-resistant structures Rar'd PDF 5 MB http://rapidshare.com/files/117253237/Earthquake_EngAppDesign.zip http://www.filefactory.com/file/9d6f11/ http://ifile.it/ytx430i http://rapidshare.com/files/117165841/cberingApplicationtoczxczx_0470048433.r ar.html

Structural Timber Design to Eurocode 5 By Jack Porteous, Abdy Kermani • • • • •

Publisher: Wiley-Blackwell Number Of Pages: 560 Publication Date: 2008-01-10 ISBN-10 / ASIN: 1405146389 ISBN-13 / EAN: 9781405146388

http://rapidshare.com/files/11725779...Eurocode_5.zip http://ifile.it/qngph7v http://rapidshare.com/files/11716524...46389.rar.html

Civil Engineer's Reference Book, Fourth Edition Book Description After an examination of fundamental theories as applied to civil engineering, authoritative coverage is included on design practice for certain materials and specific structures and applications, and a particular feature is the incorporation of chapters on construction and site practice, including contract management and control. Book Info Completely revised and updated. Concise and comprehensive survey of the fundamentals, theory and current practice in the many branches of civil engineering. Product Details *Author: L. S. Blake * Paperback: 1246 pages * Publisher: Laxton's; 4 edition (April 1, 1994) * Language: English * ISBN-10: 0750619643 * ISBN-13: 978-0750619646 http://www.badongo.com/file/1585628 http://www.badongo.com/file/1585824 http://www.badongo.com/file/1586429 http://www.badongo.com/file/1586427 http://www.badongo.com/file/1586428

Foundation Design By Allan Hodgkinson * Publisher: Architectural Press * Number Of Pages: 127 * Publication Date: 1987-06 * ISBN-10 / ASIN: 0851398375 * ISBN-13 / EAN: 9780851398372 Editorial Reviews Product Description Using a design-oriented approach that addresses geotechnical, structural, and construction aspects of foundation engineering, this book explores practical methods of designing structural foundations, while emphasizing and explaining how and why foundations behave the way they do. It explains the theories and experimental data behind the design procedures, and how to apply this information to real-world problems. Covers general principles (performance requirements, soil mechanics, site exploration and characterization); shallow foundations (bearing capacity, settlement, spread footings -- geotechnical design, spread footings -structural design, mats); deep foundations (axial load capacity -- full-scale load tests, static methods, dynamic methods; lateral load capacity; structural design); special topics (foundations on weak and compressible soils, foundation on expansive soils, foundations on collapsible soils); and earth retaining structures (lateral earth pressures, cantilever retaining walls, sheet pile walls, soldier pile walls, internally stabilized earth retaining structures). For geotechnical engineers, soils engineers, structural engineers, and foundation engineers.

PDF Size: 4.58 MB http://ifile.it/5tlvpk0

Foundation Design: Principles and Practices (2nd Edition) By Donald P. Coduto * Publisher: Prentice Hall * Number Of Pages: 883 * Publication Date: 2000-07-20 * ISBN-10 / ASIN: 0135897068 * ISBN-13 / EAN: 9780135897065 Product Description: Using a design-oriented approach that addresses geotechnical, structural, and construction aspects of foundation engineering, this book explores practical methods of designing structural foundations, while emphasizing and explaining how and why foundations behave the way they do. It explains the theories and experimental data behind the design procedures, and how to apply this information to real-world problems. Covers general principles (performance requirements, soil mechanics, site exploration and characterization); shallow foundations (bearing capacity, settlement, spread footings -- geotechnical design, spread footings -- structural design, mats); deep foundations (axial load capacity -- full-scale load tests, static methods, dynamic methods; lateral load capacity; structural design); special topics (foundations on weak and compressible soils, foundation on expansive soils, foundations on collapsible soils); and earth retaining structures (lateral earth pressures, cantilever retaining walls, sheet pile walls, soldier pile walls, internally stabilized earth retaining structures). For geotechnical engineers, soils engineers, structural engineers, and foundation engineers.

http://rapidshare.com/files/113386773/Coduto.rar

Guide to Design Criteria for Bolted and Riveted Joints, 2nd Edition By Geoffrey L. Kulak, John W. Fisher, John H. A. Struik * Publisher: Wiley-Interscience * Number Of Pages: 352 * Publication Date: 1987-03-31 * ISBN-10 / ASIN: 0471837911 * ISBN-13 / EAN: 9780471837916 pdf, with bookmarks, no password http://rapidshare.com/files/11314222...olt_joints.pdf

In 1971 the Institution of Structural Engineers published a report on the Stability ofmodern buildings as a result of its conference on industrialized buildings, the collapse of prefabricated buildings under erection at Aldershot and the aftermath of the tragic accident at Ronan Point. That report was largely concerned with high-rise construction, and it was in 1984 that the Institution formed a Committee to prepare a successor to deal with stability of all types of building whether high or low rise

pdf 2 mb password:gigapedia.org http://rapidshare.com/files/65427210..._Buildings.rar

Seismic Design for Buildings CHAPTER 1 SEISMIC DESIGN FOR BUILDINGS Paragraph 1-1 PURPOSE AND SCOPE 1-2 BACKGROUND 1-3 APPLICABILITY 1-4 CONFLICTS AND MODIFICATIONS 1-5 IMPLEMENTATION 1-6 STRUCTURE OF THE UFC 1-7 COMMENTARY 1-8 PROCEDURES FOR APPLYING UFC 3-310-04 FOR STRUCTURAL DESIGN 1-8.1 Seismic Design in Regions of Low Activity 1-8.2 Progressive Collapse Analysis and Design 1-9 PROCEDURES FOR APPLYING UFC 3-310-04 FOR DESIGN OF ARCHITECTURAL, MECHANICAL, AND ELECTRICAL COMPONENTS 1-10 REVISIONS 1-11 CREDITS 1-12 ACRONYMS AND ABBREVIATIONS APP A REFERENCES APP B 2003 BUILDING CODE MODIFICATIONS FOR CONVENTIONAL SEISMIC DESIGN FOR DOD BUILDINGS APP C SIMPLIFIED ALTERNATIVE STRUCTURAL DESIGN CRITERIA FOR SIMPLE BEARING WALL OR BUILDING FRAME SYSTEMS APP D ALTERNATE DESIGN PROCEDURE FOR BUILDINGS AND OTHER STRUCTURES IN SEISMIC USE GROUP III APP E DESIGN FOR ENHANCED PERFORMANCE OBJECTIVES: SEISMIC USE GROUP IV APP F GUIDANCE FOR SEISMIC DESIGN OF ARCHITECTURAL, MECHANICAL, AND ELECTRICAL COMPONENTS APP G GUIDANCE ON APPLICATION OF UFC 3-310-04 AND IBC 2003

Download : pdf1 File : pdf, 3.7 MB, 245 pages http://www.artikel-software.com/file...0Buildings.pdf

Civil Engineering Design and Construct By G. Lafford, et al * Publisher: Construction Industry Research & Information Association (CIRIA) * Number Of Pages: 92 * Publication Date: 2001-01-09 * ISBN-10 / ASIN: 0860175340 * ISBN-13 / EAN: 9780860175346

http://rapidshare.com/files/11175786..._Construct.rar

Concrete Repair According to the new European Standard EN 1504 http://www.ibac.rwth-aachen.de/filea...41_Raupach.pdf

Fracture and Fatigue Control in Structures Applications of Fracture Mechanics (Astm Manual Series) By John M. Barsom, Stanley Theodore Rolfe * Publisher: ASTM International * Number Of Pages: 525 * Publication Date: 1999-11 * ISBN-10 / ASIN: 0803120826 * ISBN-13 / EAN: 9780803120822 Book Description: The latest edition of this comprehensive publication concentrates on the practical applications of fracture mechanics to fracture and fatigue control in structures, emphasizing the driving force and the resistance force. It also examines fitness for service, or life extension, of existing structures whose design life may have expired but whose actual life can be continued. Finally, it provides case studies for the practicing professional engineer or graduate engineering student, which illustrate the effects of toughness, constraint, loading rate, failure analysis, and other factors that demonstrate the application of fracture mechanics to real-world structures. Five sections cover: Introduction to Fracture Mechanics; Fracture Behavior; Fatigue and Environmental Behavior; Fracture and Fatigue Control; and Applications of Fracture Mechanics - Case Studies. Rar'd PDF files No password 8564 KB http://rapidshare.com/files/106534691/0803120826.rar

Structural and Stress Analysis, Second Edition By T. H. G. Megson * Publisher: Butterworth-Heinemann * Number Of Pages: 744 * Publication Date: 2005-04-15 * ISBN-10 / ASIN: 0750662212 * ISBN-13 / EAN: 9780750662215 Product Description: Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure. The new edition of this popular textbook provides the student with a comprehensive introduction to all types of structural and stress analysis, starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. Building on the success of the first edition, new material on structural dynamics and finite element method has been included. Virtually no prior knowledge of structures is assumed and students requiring an accessible and comprehensive insight into stress analysis will find no better book available. * Comprehensive overview of structural and stress analysis * Invaluable to undergraduate civil engineers * Numerous worked examples and problems * Solutions manual available online Rar'd PDF files No password 6899 KB

http://rapidshare.com/files/106534690/0750662212.rar

Concrete Structures: Stresses and Deformations By Amin Ghali * Publisher: Spon Press * Number Of Pages: 504 * Publication Date: 2002-05-03 * ISBN-10 / ASIN: 0415247217 * ISBN-13 / EAN: 9780415247214 Book Description: The authors present accurate and easy-to-apply methods of analysing immediate and long-term stresses and deformations. Comprehensively updated, the third edition of Concrete Structures also four new chapters covering: non-linear analysis of plane frames, design for serviceability of prestressed concrete, serviceability of members reinforced with fibre polymer bars, and the analysis of time-dependent internal forces with linear computer programs that are routinely used by structural designers. A website accompanies the book, featuring three design calculation programs related to stresses in cracked sections, creep coefficients and time-dependent analysis. 5062 KB rar pdf

http://rapidshare.com/files/105848699/0415247217.rar

Structural Dynamics and Vibration in Practice An Engineering Handbook By Douglas Thorby * Publisher: Butterworth-Heinemann * Number Of Pages: 420 * Publication Date: 2008-02-25 * ISBN-10 / ASIN: 0750680024 * ISBN-13 / EAN: 9780750680028 Product Description: This straightforward text, primer and reference introduces the theoretical, testing and control aspects of structural dynamics and vibration, as practised in industry today. Written by an expert engineer of over 40 years experience, the book comprehensively opens up

the dynamic behavior of structures and provides engineers and students with a comprehensive practice based understanding of the key aspects of this key engineering topic. Key features Worked example based makes it a thoroughly practical resource Aimed at those studying to enter, and already working in industry; Presents an applied practice and testing based approach while remaining grounded in the theory of the topic Makes the topic as easy to read as possible, omitting no steps in the development of the subject; Includes the use of computer based modelling techniques and finite elements Covers theory, modelling testing and control in practice Written with the needs of engineers of a wide range of backgrounds in mind, this book will be a key resource for those studying structural dynamics and vibration at undergraduate level for the first time in aeronautical, mechanical, automotive and civil engineering It will be ideal for laboratory classes and as a primer for readers returning to the subject, or coming to it fresh at graduate level. It is a guide for students to keep and for practicing engineers to refer to: its worked example approach ensures that engineers will turn to Thorby for advice in many engineering situations. 1. Presents students and practitioners in all branches of engineering with a unique structural dynamics resource and primer, covering practical approaches to vibration engineering while remaining grounded in the theory of the topic 2. Written by a leading industry expert, with a worked example lead approach for clarity and ease of understanding 3. Makes the topic as easy to read as possible, omitting no steps in the development of the subject; covers computer based techniques and finite elements http://www.filefactory.com/file/ad333a/ http://rapidshare.com/files/103305896/0750680024.rar

Design and Control of Concrete Mixtures (Engineering Bulletin (Skokie, Ill.).) (Engineering Bulletin (Skokie, Ill.).) By Steven H. Kosmatka, Beatrix Kerkhoff, William C. Panarese * Publisher: Portland Cement Association * Number Of Pages: 358 * Publication Date: 2002-02-01 * ISBN-10 / ASIN: 0893122173 * ISBN-13 / EAN: 9780893122171 Description: Definitive reference on concrete technology covers fundamentals and detailed information on freshly mixed and hardened concrete. Extensively updated and expanded, this new edition discusses materials for concrete, such as portland cements, supplementary cementing materials, aggregates, admixtures and fibers; air entrainment; procedures for mix proportioning, batching, mixing, transporting, handling, placing, consolidating, finishing, and curing concrete; precautions necessary during hot- and cold-weather concreting; causes and methods of controlling volume changes; commonly used control tests for quality concrete; special types of concrete, such as high-performance, lightweight, heavyweight, no-slump, roller-compacted, shotcrete, mass concrete and many more. Applicable ASTM, AASHTO, and ACI standards are referred to extensively PDF in RAR 33,943 KB http://rapidshare.com/files/101269964/Design_and_Control_of_Concrete_Mixtures .rar

Concrete Microstructure , Properties and Materials By P. Kumar Mehta, Paulo J.M. Monteiro * Publisher: McGraw-Hill Professional * Number Of Pages: 659 * Publication Date: 2005-09-26 * ISBN-10 / ASIN: 0071462899 * ISBN-13 / EAN: 9780071462891 Book Description: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability ‫كود‬:

http://www.filefactory.com/file/3c3960/ http://rapidshare.com/files/99954367/0071462899.pdf

Uniform Building Code 1997: Structural Engineering Design Provisions (Uniform Building Code Vol 2: Structural Engineering Design Provisions) By International Code Council * Publisher: International Conference of Building Officials * Number Of Pages: 492 * Publication Date: 1997-04 * ISBN-10 / ASIN: 1884590896 * ISBN-13 / EAN: 9781884590894 * Binding: Paperback 23 Mb PDF file download link

Mihd

ACI 318-08: Building Code Requirements for Structural Concrete and Commentary By Committee 318 * Publisher: ACI * Number Of Pages: 456 * Publication Date: 2008 * ISBN-10 / ASIN: 0870312642 * ISBN-13 / EAN: 9780870312649 Product Description: Abstract: The Building Code Requirements for Structural Concrete (Code) covers the materials, design, and construction of structural concrete used in buildings and where applicable in nonbuilding structures. The Code also covers the strength evaluation of existing concrete structures. Among the subjects covered are: drawings and specifications; inspection; materials; durability requirements; concrete quality, mixing, and placing; formwork; embedded pipes; construction joints; reinforcement details; analysis and design; strength and serviceability; flexural and axial loads; shear and torsion; development and splices of reinforcement; slab systems; walls; footings; precast concrete; composite flexural members; prestressed concrete; shells and folded plate members; strength evaluation of existing structures; provisions for seismic design; structural plain concrete; strut-and-tie modeling in Appendix A; alternative design provisions in Appendix B; alternative load and strength reduction factors in Appendix C; and anchoring to concrete in Appendix D. The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions.

Size RAR: 14 Mb http://ifile.it/kjhzm9t

Or http://rapidshare.com/files/102560345/ACI-318R-08.rar

Reinforced Concrete Design to BS 8110 - Simply explained By A.H.Allen * Publisher: Taylor & Francis * Number Of Pages: 256 * Publication Date: 1988-04-02 * ISBN-10 / ASIN: 0419145508 * ISBN-13 / EAN: 9780419145509 Book Description: This highly successful book describes the background to the design principles, methods and procedures required in the design process for reinforced concrete structures. The easy to follow style makes it an ideal reference for students and professionals alike Pdf, 10M, scanned photocopy, good quality http://www.mediafire.com/?cxuzd1mbp9d

http://rapidshare.com/files/2382593/www.allislam.net_almourrakochi_Reinforced _Concrete_Design_To_Bs81

Concrete Pavement Design Guidance Notes By Thom Griffiths * Publisher: Spon Press * Number Of Pages: 168 * Publication Date: 2007-06-18 * ISBN-10 / ASIN: 0415254515 * ISBN-13 / EAN: 9780415254519 Book Description: This book is a comprehensive design guide summarising current best practice for the design of concrete pavements. Following an overview of the theory involved, the author details optimum design techniques and best practice, with a focus on highway and infrastructure projects. Worked examples and calculations are provided to describe standard design methods, illustrated with numerous case studies. The author provides guidance on how to use each method on particular projects, with reference to UK, European and US standards and codes of practice. Concrete Pavement Design: Guidance Notes is an essential handbook for civil engineers, consultants and contractors involved in the design and construction of concrete pavements. It will also be of interest to students of pavement design. 1.82 MB rar pdf

http://ifile.it/8nmeqlc http://rapidshare.com/files/99285893/0415254515.rar

Concrete Pavement Design, Construction, and Performance By Norbert Delatte * Publisher: Taylor & Francis * Number Of Pages: 372 * Publication Date: 2007-10-30 * ISBN-10 / ASIN: 0415409705 * ISBN-13 / EAN: 9780415409704 3.4 MB rar pdf http://rapidshare.com/files/99285894/0415409705.rar

Using the Building Regulations: Part C: Site Preparation & resistance to contaminants & moisture by Mike Billington * Publisher: Butterworth-Heinemann * Number Of Pages: 232 * Publication Date: 2007-06-07 * ISBN / ASIN: 0750662581 * EAN: 9780750662581 Book Description: As the Building Regulations and Approved Documents have become more and more complex, they have become increasingly unfriendly for a professional user. Compliance is only possible by understanding a wide range of supporting documentation. Alternative approaches are implied,

but not described or analysed. This book examines Approved Document C on Site Preparation and takes the user through all the key stages of preparation, compliance, inspection and enforcement. It offers practical advice on using not just the traditional routes to compliance but also on the alternative approaches suggested but not explained in the Approved Documents. The advantages and disadvantages of each form of compliance are analysed in depth. Everything you need to know to prepare a site's fixtures against contamination and moisture is discussed, including floors, walls, window frames, door tresholds, and roofs. This is an indispensable text for professional designers, architects, structural and other specialist engineers, building control officers and students in construction, building and architecture. *Detailed guidance to Part C *Practical advice to achieve compliance *Alternative approaches explained and evaluated 2560 KB RAR'd PDF File http://mihd.net/m6dzvo http://rapidshare.com/files/44905375/0750662581.rar

The Structural Engineers Professional Training Manual By Dave K. Adams * Publisher: McGraw-Hill Professional * Number Of Pages: 405 * Publication Date: 2007-10-24 * ISBN-10 / ASIN: 0071481079 * ISBN-13 / EAN: 9780071481076 Book Description: The Business and Problem-Solving Skills Needed for Success in Your Engineering Career! The Structural Engineer's Professional Training Manual offers a solid foundation in the realworld business and problem-solving skills needed in the engineering workplace. Filled with illustrations and practical “punch-list” summaries, this career-building guide provides an introduction to the practice and business of structural and civil engineering, including lots of detailed advice on developing competence and communicating ideas. Comprehensive and easyto-understand, The Structural Engineer's Professional Training Manual features:

* Recommendations for successfully training engineers who are new to the field * Methods for bringing together ideas from a variety of sources to find workable solutions to difficult problems * Information on the real-world behaviors of building materials * Guidance on licensing, liability, regulations, and employment * Techniques for responsibly estimating design time and cost * Tips on communicating design ideas effectively * Strategies for working successfully as part of a team Inside This Skills-Building Engineering Resource The Dynamics of Training • The World of Professional Engineering • The Business of Structural Engineering • Building Projects • Bridge Projects • Building Your Own Competence • Communicating Your Designs • Engineering Mechanics • Soil Mechanics • Understanding the Behavior of Concrete • Understanding the Behavior of Masonry Construction • Understanding the Behavior of Structural Steel • Understanding the Behavior of Wood Framing

6267 KB rar pdf http://rapidshare.com/files/97989513/0071481079.rar http://mihd.net/572hpq

Planning, Estimating, and Control of Chemical Construction Projects (Cost Engineering) By Pablo F. Navarrete, William C. Cole * Publisher: CRC * Number Of Pages: 480 * Publication Date: 2001-01-15 * ISBN-10 / ASIN: 0824705165 * ISBN-13 / EAN: 9780824705169 Book Description: Contains added chapters emphasizing the importance of choosing the correct project and defining project goals. Stresses the need for adequate front end loading (FEL) and outlines the responsibility of the venture manager in project selection. Provides updated case studies and examples on technical evaluation criteria, construction progress monitoring, offshore estimating, and more. The authors discuss such topics as initial involvement and plan of action, process design, regulatory compliance, risk analysis, project execution plan/master project schedule, estimating, contracting, detailed engineering, procurement, construction management, project control, contracts administration, communications, and plant start-up. PDF in WinRAR -> 35,9 MB http://rapidshare.com/files/77834437/Lucky0824705165.rar mirrors : http://www.filefactory.com/file/b47547/

http://w13.easy-share.com/1699723284.html http://www.mediafire.com/?e2tdzfxsyye

Masonry Walls: Specification and Design By K. Thomas * Publisher: Butterworth-Heinemann Ltd * Number Of Pages: 317 * Publication Date: 1996-02 * ISBN-10 / ASIN: 0750624655 * ISBN-13 / EAN: 9780750624657 Book Description: Details symptoms and causes of defects * Of special interest to these investigating building failures and expert witnesses * Much needed comprehensive reference This book provides a clear, well-illustrated guide to the specification and design of modern masonry and covers brickwork, blockwork and stone masonry forms of construction. It also describes and analyses possible defects and gives advice on effective remedial works

13,273KB PDF http://www.4shared.com/file/26708246...esign.html?s=1

Practical Foundation Engineering Handbook By Robert Wade Brown * Publisher: Mcgraw-Hill (Tx) * Number Of Pages: 1120 * Publication Date: 1995-12-18 * ISBN-10 / ASIN: 0070081948 * ISBN-13 / EAN: 9780070081949 Book Description: Structural foundation answers on demand! Save your most difficult structural foundation questions for the one guide with all the answers: Robert Wade Brown's Practical Foundation Engineering Handbook. It's jam-packed with the best and the latest on foundation construction, performance, and repair for residential, light commercial, and heavy construction projects. You'll get skilled guidance from a full team of soil and foundation experts on identifying and implementing the best techniques for site development... earth pressure and retaining systems... soil stabilization and improvement... stress distribution and settlement... soil mechanics and foundation design... legal and insurance issues... and much more 26.27 MB http://rapidshare.com/files/10956077/Practical_Foundation_Engineering_Handboo k.rar

Design of Concrete Structures By Arthur H Nilson Publisher: McGraw-Hill Number Of Pages: 800 Publication Date: 2003-08-08 ISBN-10 / ASIN: 0072483059 ISBN-13 / EAN: 9780072483055 Binding: Hardcover

Book Description: The 13th edition of the classic text, Design of Concrete Structures, is completely revised using the newly released 2002 ACI Code. The text covers the behavior and design aspects of concrete and provides thoroughly updated examples and homework problems throughout. The 13th edition features a new chapter, Chapter 10, covering strut-and-tie models, although the two-pronged objectives of (1) establishing a firm understanding of the behavior of reinforced concrete, and (2) developing proficiency in the methods used in current design practice are retained. The text presents the basic mechanics of structural concrete and methods for the design of individual members for bending, shear, torsion, and axial force, and also provides detail in the various types of structural systems applications

http://mihd.net/blav8w http://rs95l3.rapidshare.com/files/3...th_edition.rar

Pile Design and Construction Practice by Micha Tomlinson Publisher: Taylor & Francis Number Of Pages: 432 Publication Date: 1994-01-05 ISBN / ASIN: 0419184503 Book Description: The fourth edition of this well-known book is fully revised and up-dated. It deals comprehensively with every aspect of design and construction of all types of piled foundation. A key feature of this book is the large number of worked examples, many of which are based on actual problems encountered in practice 18130 KB RAR'd PDF ‫كود‬: http://www.zshare.net/download/2319265e7ead63/ http://rapidshare.com/files/39324109/59319.rar

Geosynthetic Design and Construction Guidelines by Office of Bridge Technology Description: Manual developed for the FHWA training course Geosynthetic Engineering Workshop. The manual enables a highway engineer to correctly identify and evaluate potential applications of geosynthetics as an alternative to other construction methods and as a means to solve construction problems. The manual addresses primarily geotechnical issues and is listed as a current publication on the Office of Bridge Technology, Geotechnical Engineering Publications website 56.99MB 479 pages direct link http://isddc.dot.gov/OLPFiles/FHWA/011431.pdf http://www.filefactory.com/file/4149a8/ http://rapidshare.com/files/95448074...Guidelines.rar

Guide for the Design of Crane-Supporting Steel Structures by Canadian Institute of Steel Construction Publisher: Canadian Institute of Steel Construction Number Of Pages: 129 Publication Date: Jan-2005 ISBN / ASIN: 0-88811-101-0 Crane-Supporting Steel Structures: Design Guide First Edition (January 2005) R.A. MacCrimmon This guide fills a long-standing need for technical information for the design and construction of crane-supporting steel structures that is compatible with Canadian codes and standards written in Limit States format. It is intended to be used in conjunction with the National Building Code of Canada, 2005 (NBCC 2005), and CSA Standard S16-01, Limit States Design of Steel Structures (S16-01). This guide provides information on how to apply the current Canadian Codes and Standards to aspects of design of crane-supporting structures such as loads, load combinations, repeated loads, notional loads, monosymmetrical sections, analysis for torsion, stepped columns, and distortion induced fatigue. The scope of this design guide includes crane-supporting steel structures regardless of the type of crane. The interaction ofthe crane and its supporting structure is addressed. ISBN 0-88811-101-0 129 pages, download PDF (1.1 MB) link : _http://www.ciscicca.ca/files/publications/techpubs/design/craneguide/cranesupportingsteelstructures.pdf

http://rapidshare.com/files/65745653...structures.pdf

Dynamics of Structures: Theory and Applications to Earthquake Engineering (2nd Edition) By Anil K. Chopra * Publisher: Prentice Hall * Number Of Pages: 844 * Publication Date: 2000-09-11 * ISBN-10 / ASIN: 0130869732 * ISBN-13 / EAN: 9780130869739 Book Description: This second edition includes many topics encompassing the theory of structural dynamics and the application of this theory regarding earthquake analysis, response, and design of structures. Covers the inelastic design spectrum to structural design; energy dissipation devices; Eurocode; theory of dynamic response of structures; structural dynamics theory; and more. Ideal for readers interested in Dynamics of Structures and Earthquake Engineering

File size: 24770KB http://w13.easy-share.com/1699544099.html

Residential Structural Design Guide: 2000 Edition This guide strives to bridge the gap between conventional engineering practices and conventional residential construction practices.

February 2000 Structural Design Guide is a unique and comprehensive tool for design professionals, particularly structural engineers, seeking to provide value-added services to the producers and consumers of American housing. As such, the guide is organized around the following major objectives: * to present a sound perspective on American housing relative to its history, construction characteristics, regulation, and performance experience; * to provide the latest technical knowledge and engineering approaches for the design of homes to complement current code-prescribed design methods; * to assemble relevant design data and methods in a single, comprehensive format that is instructional and simple to apply for the complete design of a home; and * to reveal areas where gaps in existing research, design specifications, and analytic tools necessitate alternative methods of design and sound engineering judgment to produce efficient designs. This guide consists of seven chapters. The layout and application of the various chapters are illustrated in the figure on page vii. Chapter 1 describes the basic substance of American housing, including conventional construction practices, alternative materials, building codes and standards, the role of design professionals, and actual experience with respect to performance problems and successes, particularly as related to natural hazards such as hurricanes and earthquakes. Chapter 2 introduces basic engineering concepts regarding safety, load path, and the structural system response of residential buildings, subassemblies, and components to various types of loads. Chapter 3 addresses design loads applicable to residential construction. Chapters 4 and 5 provide step-by-step design procedures for the various components and assemblies comprising the structure of a home—from the foundation to the roof. Chapter 6 is devoted to the design of light-frame homes to resist lateral loads from wind and earthquakes. Chapter 7 addresses the design of various types of connections in a wood-framed home that are important to the overall function of the numerous component parts. As appropriate, the guide offers additional resources and references on the topics addressed. 434 pages Size: 3.76 MB http://mihd.net/kb21nh http://rs98cg2.rapidshare.com/files/...esignguide.pdf

Cathodic Protection of Reinforced Concrete Concrete Society Technical Report -1989 ISBN 0946691347

http://rapidshare.com/files/93990113/Cathodic_Protection_Of_Reinforced_Concre te.rar

Design Guidance for Strengthening Concrete Structures using Fibre Composite Materials ISBN 0946691843 This Report provides authoritative guidance for structural designers on strengthening concrete buildings and bridges by bonding fibre composite to the surface. This relatively new technique is proving to be much quicker and more cost-effective than established techniques using steel plates, but guidance has been lacking until now. The Report explains the advantages and disadvantages of the technique and gives examples of applications. It explains the design approach in detail and discusses workmanship, installation, inspection and maintenance. The second edition of this Report reflects the fact that materials and techniques have developed rapidly along with their range of applications. Significant changes covered in the new edition include modification of the treatment of partial safety factors in the design process, and design of members in shear, to provide a less empirical approach, amongst others

http://mihd.net/mw9lnh http://rapidshare.com/files/93995874/Design_Guidance__Strengthening_Concrete_ Fiber_Comp

Masonry Designers' Guide. 4th ed. (book w/ cd rom). * Publisher: Masonry Society * Number Of Pages: * Publication Date: 2003 * ISBN-10 / ASIN: 1929081200 * ISBN-13 / EAN: 9781929081202 Product Description: Purpose is to assist those involved in the design, construction, and regulation of masonry structures. The best guide on designing has been completely updated to comply with the provisions of the 2002 Building Code Requirements of Masonry Structures (ACI 530-02) and Specifications for

Masonry Structures (ACI 530.1-02), which are referenced by the 2003 International Building Code and the NFPA 5000. Topics covered in the guide include masonry materials, testing, quality assurance, quality control, construction methods, structural design, and seismic detailing requirements. Major revisions include: * The incorporation of strength design into the discussions and examples; * A detailed discussion on new prescriptive seismic provisions for masonry; * Revised cold- and hot-weather construction requirements; and * Updates to the entire MDG to highlight new changes in the 2002 MSJC. As a bonus feature, you will also receive the MDG-4 in CD-ROM format, allowing you to easily search and find keywords. MDG-4 is a valuable reference tool for engineers, contractors, architects, inspectors, building code officials, and educators RAR-ed and splitted - size 181 MB ( exploded ) to run click SETUP icon

http://mihd.net/qial8w http://mihd.net/r9jlh2 or http://rapidshare.com/files/93978893/Masonry_Designer_s_Guide_4Th_Ed.part1.rar http://rapidshare.com/files/93979872/Masonry_Designer_s_Guide_4Th_Ed.part2.rar

CONSTRUCTION AND MAINTENANCE OF MASONRY HOUSES For masons and craftsmen by MARCIAL BLONDET Editor Director: Dr. Eng. Marcial Blondet Construction: Eng. Iván Bragagnini Structures: Mag. Eng. Gianfranco Ottazzi Architecture: Arch. Mariana Bidart Research Assistant: Eng. Nicola Tarque Research Assistant: Eng. Miguel Mosqueira Design and edition: Arch. Mariana Bidart Art: Mr. Víctor Sanjinez Translation: Eng. Gladys Villa Garcia Djvu | pages: 90 | size: 3 mb http://rapidshare.com/files/93787393/Construction_and_maintenance_of_Masonry_ Houses.djvu http://www.filefactory.com/file/a9936a/ http://mihd.net/4oy79b

Mechanics of Materials A Modern Integration of Mechanics and Materials in Structural Design By Christopher Jenkins, Sanjeev Khanna * Publisher: Academic Press * Number Of Pages: 408 * Publication Date: 2005-03-15 * ISBN-10 / ASIN: 0123838525 * ISBN-13 / EAN: 9780123838520 Book Description: This new book is the first to bridge the often disparate bodies of knowledge now known as applied mechanics and materials science. Using a very methodological process to introduce mechanics, materials, and design issues in a manner called "total structural design", this book seeks a solution in "total design space" Features of the text include: * A generalized design template for solving structural design problems. * Every chapter first introduces mechanics concepts through deformation, equilibrium, and energy considerations. Then the constitutive nature of the chapter topic is presented, followed by a link between mechanics and materials concepts. Details of analysis and materials selection are subsequently discussed. * A concluding example design problem is provided in most chapters, so that students may get a sense of how mechanics and materials come together in the design of a real structure. * Exercises are provided that are germane to aerospace, civil, and mechanical engineering applications, and include both deterministic and design-type problems. * Accompanying website contains a wealth of information complementary to this text, including

a set of virtual labs. Separate site areas are available for the instructor and students. * Combines theories of solid mechanics, materials science and structural design in one coherent text/reference * Covers physical scales from the atomistic to continuum mechanics * Offers a generalized structural design template djvu 7.29 mb http://www.filefactory.com/file/e49e5a/ http://rapidshare.com/files/90981242/jenkinsMechanicsOfMaterials.djvu

Engineering Rock Mechanics By J. A. Hudson, John P. Harrison * Publisher: Pergamon Press Inc * Number Of Pages: 456 * Publication Date: 1997-06-01 * ISBN-10 / ASIN: 0080419127 * ISBN-13 / EAN: 9780080419121 Book Description: Hardbound. Engineering rock mechanics is the discipline used to design structures built in rock. These structures encompass building foundations, dams, slopes, shafts, tunnels, caverns, hydroelectric schemes, mines, radioactive waste repositories and geothermal energy projects: in short, any structure built on or in a rock mass. Despite the variety of projects that use rock engineering, the principles remain the same. Engineering Rock Mechanics clearly and systematically explains the key principles behind rock engineering. The book covers the basic rock mechanics principles; how to study the interactions between these principles and a discussion on the fundamentals of excavation and support and the application of these in the design of surface and underground structures. Engineering Rock Mechanics is recommended as an across-the-board source of information for the benefit of anyone involved in rock mechanics and rock engineering

pdf with bookmarks http://rapidshare.com/files/90824428...anics_Vol1.pdf

REINFORCED CONCRETE DEEP BEAMS By F.K.Kong, Routledge, 1998 ISBN : 0216926955 299pages Book Description The *******s of this book have been chosen with the following main aims: to review the present coverage of the major design codes and the CIRIA guide, and to explain the fundamental behaviour of deep beams; to provide information on design topics which are inadequately covered by the current codes and design manuals; and to give authoritative reviews of some powerful concepts and techniques for the design and analysis of deep beams

7,671 MB http://www.filefactory.com/file/7e688e/ http://rapidshare.com/files/11076575....Kong.rar.html

http://mihd.net/z9ufog http://www.rapidshare.com/files/4320...Deep_Beams.rar

NFPA 5000: Building Construction and Safety Code, 2006 Edition by National Fire Protection Association (NFPA) Enhance safety by applying the industry's most advanced design and construction rules. Keep pace with the latest technologies and safety practices with the updated NFPA 5000: Building Construction and Safety Code. Changes to the 2006 Building Construction and Safety Code affect: * Sprinkler provisions for new one- and two-family dwellings, nursing homes, and nightclub assembly occupancies * Accessibility rules * Egress requirements for stairs serving more than 2000 occupants. * Smoke control systems in malls that contain three or more stories * Buildings that contain high-hazard *******s Base your job decisions on a strong foundation of current knowledge. This 2006 edition of NFPA 5000 Building Construction and Safety Code has received several revisions, including the following:

* The introduction of an optional design approach for selection of allowable building and heights and areas that is based on construction type and enhanced fire compartments. * Several changes have been incorporated to address certain means of egress design features, including an increase in stair width when large populations would be expected to utilize the stairs and a mandate for stairway descent devices in certain multistory buildings. * Chapter 12 was completely revised to be consistent with the recent changes to the Americans with Disabilities Act Accessibility Guidelines (ADAAG) and the technical provisions of ICC/ANSI A117.1, American National Standard for Accessible and Usable Buildings and Facilities. * New requirements for patient treatment and sleeping room suites have been included in Chapter 19 for health care occupancies. Placement and use rules for alcohol-based hand rub dispensing units have also been added for health care and ambulatory health care occupancies. * A first-of-its-kind requirement in a US building code for residential sprinklers in one- and twofamily dwellings appears in Chapter 22. * The hazardous *******s provisions of Chapter 34 have been further refined and clarified to address new topics and subjects; this chapter continues to correlate with the various specialty codes and standards that address certain subjects, and a flow chart has been added to help select the appropriate protection scheme for the conditions given. * The structural design and materials chapters have all been updated to recognize and reference the latest editions of key design documents, such as ASCE 7, Minimum Design Loads for Buildings and Other Structures. * Substantial changes were made to Chapter 38, Roof Assemblies and Roof Structures, to address new requirements for subjects such as metal shingle roof coverings. PDF 6.82 MB http://mihd.net/katxez http://rapidshare.com/files/90629436/nfpa_5000_2006.pdf

Soil Sampling and Methods of Analysis, 2nd Edition By E.G. Gregorich, M.R. Carter * Publisher: CRC * Number Of Pages: 1264 * Publication Date: 2007-08-03 * ISBN-10 / ASIN: 0849335868 * ISBN-13 / EAN: 9780849335860 Book Description: Thoroughly updated and revised, this second edition of the bestselling Soil Sampling and Methods of Analysis presents several new chapters in the areas of biological and physical analysis and soil sampling. Reflecting the burgeoning interest in soil ecology, new contributions describe the growing number and assortment of new microbiological techniques, describe indepth methods, and demonstrate new tools that characterize the dynamics and chemistry of soil organic matter and soil testing for plant nutrients. A completely new section devoted to soil water reviews up-to-date field- and laboratory-based methods for saturated and unsaturated soil hydraulic properties. Retaining the easy-to-follow, "cookbook" style of the original, this second

edition provides a compilation of soil analytical techniques that are fast, straightforward, and relatively easy-to-use. Heavily referenced, peer-reviewed contributions from approximately 150 specialists make this a practical manual and resource handbook that describes a wide array of methods, both conventional and cutting-edge, for analyzing the chemical, biological, biochemical, and physical properties of many different soil types. Including several "primer" chapters that cover the overall principles and concepts behind the latest techniques, the book presents sufficient detail on the materials and procedures to characterize the potential and limitation of each method. It covers recent improvements in methodology, outlines current methods, and characterizes the best methods available for selecting the appropriate analysis technique. Promoting the research and practical application of findings in soil science, Soil Sampling and Methods of Analysis, Second Edition continues to be the most current, detailed, comprehensive tool for researchers and practitioners working with soil (16.8 MB) , RAR 14.3 MB pass: tFSOSAMOFA.rar http://rapidshare.com/files/90673164/SOSAMOFA.rar

Fundamentals of Soil Behavior By James K. Mitchell, Kenichi Soga * Publisher: Wiley * Number Of Pages: 592 * Publication Date: 2005-05-25 * ISBN-10 / ASIN: 0471463027 * ISBN-13 / EAN: 9780471463023 Book Description: The improved, new edition of the classic book on the physical properties of soil Fundamentals of Soil Behavior, Third Edition is the thoroughly updated, expanded, and revised edition of this highly distinguished publication in geotechnical engineering. Filled with useful tables and graphs illustrating correlations among composition, classification, state, and static and dynamic properties, this Third Edition continues the tradition of providing the latest information on the physical properties of soil and the fundamentals of its behavior over time. Students and busy professionals will connect with this new edition's timesaving, streamlined format and its greater emphasis on practical exercise problems involving advanced concepts of

soil behavior. Other must-read features of this Third Edition include: * New, expanded material on micro-mechanical behavior at the particulate level and its influences on engineering properties at the macro-scale * A new chapter on time effects on soil deformation at different stress and strain levels * New coverage of such important topics as environmental geotechnics, biological influences on soil behavior, soil fracturing, the effects of time, and geochemical problems * Sets of questions and problems at the end of each chapter, a feature not available in prior editions Fundamentals of Soil Behavior, Third Edition is an essential text for graduate students and researchers as well as a peerless reference for geotechnical, environmental, and civil engineers and geologists no pass rared pdf 16M http://mihd.net/7lyru1

Soil Strength and Slope Stability By J. Michael Duncan, Stephen G. Wright * Publisher: Wiley * Number Of Pages: 312 * Publication Date: 2005-01-25 * ISBN-10 / ASIN: 0471691631 * ISBN-13 / EAN: 9780471691631 Book Description: Authoritative, state-of-the-art guidance to soil strength and slope-stability analysis Through clear, concise language and practical examples, Soil Strength and Slope Stability describes state of the art methods for evaluating soil strength, and for analysis, design and stabilization of slopes in soil. The principles of limit equilibrium analysis, and appropriate use of computer programs are emphasized. Methods are described for checking the results of complex analyses, and for presenting results of slope stability analyses clearly. These are illustrated through many examples. Written by two recognized experts in the field, Soil Strength and Slope Stability features:

* Case histories of landslides, embankment failures, excavation slope failures * Principles that govern the shear strength of soils, including shear strength of municipal solid waste * Methods for estimating and evaluating shear strengths based on back analysis of slope failures and stable slopes * Explanations of the conditions that slopes must be designed to endure * Detailed explanations of analysis methods for short-term and long-term stability, rapid drawdown, earthquake, and partial consolidation * A wide range of analysis methods, methods for verifying results, and advice on presenting the results of slope stability analyses,including the importance of using multiple and/or independent methods * Methods for repairing failed slopes and stabilizing marginally stable slopes Visually informative with more than 250 illustrations, Soil Strength and Slope Stability is a complete and practical resource for geotechnical engineers, engineering geologists, civil engineers, geologists, environmental engineers, and students no pass rared pdf 10M http://mihd.net/g7c5up

Unsaturated Soil Mechanics By Ning Lu, William J. Likos * Publisher: Wiley * Number Of Pages: 584 * Publication Date: 2004-05-20 * ISBN-10 / ASIN: 0471447315 * ISBN-13 / EAN: 9780471447313 Book Description: Unsaturated Soil Mechanics is the first book to provide a comprehensive introduction to the fundamental principles of unsaturated soil mechanics. * Offers extensive sample problems with an accompanying solutions manual. * Brings together the rapid advances in research in unsaturated soil mechanics in one focused volume. * Covers advances in effective stress and suction and hydraulic conductivity measurement no pass rared pdf 10M

http://mihd.net/gam79w

Strength of Materials and Structures By Carl T. F. Ross, The late John Case, A. Chilver, * Publisher: Butterworth-Heinemann * Number Of Pages: 706 * Publication Date: 1999-08-27 * ISBN / ASIN: 0340719206 Engineers need to be familiar with the fundamental principles and concepts in materials and structures in order to be able to design structurers to resist failures. For 4 decades, this book has provided engineers with these fundamentals. Thoroughly updated, the book has been expanded to cover everything on materials and structures that engineering students are likely to need. Starting with basic mechanics, the book goes on to cover modern numerical techniques such as matrix and finite element methods. There is also additional material on composite materials, thick shells, flat plates and the vibrations of complex structures. Illustrated throughout with worked examples, the book also provides numerous problems for students to attempt. New edition introducing modern numerical techniques, such as matrix and finite element methods Covers requirements for an engineering undergraduate course on strength of materials and structures

15.68 MB http://mihd.net/zrngj8u

Concrete Materials, 2nd Edition Properties, Specifications, and Testing By Sandor Popovics * Publisher: Noyes Publications * Number Of Pages: 661 * Publication Date: 1992-01-01 * ISBN-10 / ASIN: 0815513089 * ISBN-13 / EAN: 9780815513087 Book Description: This book presents an in-depth approach to concrete ingredients and their relationships to concrete by discussing their properties, pertinent test methods, specifications, proper use and selection, and solutions to problems in practice. The approach is practice oriented, and the book assists in the improved application of concrete through a thorough understanding of its ingredients. This is aided by the discussion of certain fundamental aspects and relationships in quantitative forms, and by also presenting the interpretation of research and experience. An extensive bibliography is included. The book is a current, organized summary of knowledge concerning concrete-making materials, which will enable the engineer/user to make the best possible product using these materials

1. Introduction 2. Portland Cement - Types, Properties and Specifications 3. Hydration of Portland Cement 4. Hydraulic Cements Other Than Standard Portland 5. Water 6. Admixtures 7. Mineral Aggregates - General 8. Mineral Aggregates - Physical Properties 9. Chemical Properties of Aggregates 10. Geometric Properties of Aggregates 11. Fineness Modulus and Specific Surface 12. Grading Evaluation and Specification 13. Internal Structure of Concrete and its Optimization 14. Lightweight and Heavyweight Aggregates 15. Handling and Selection of Aggregates • Bibliography • Index

24.19 MB http://www.filefactory.com/file/808c84/

http://rapidshare.com/files/88550895/Concrete_Materials__Properties_Specifications_and_Testing.ra

Concrete Admixtures Handbook, Second Edition Properties, Science and Technology (Building Materials Science Series) By V.S. Ramachandran * Publisher: Noyes Publications * Number Of Pages: 1153 * Publication Date: 1996-01-01 * ISBN-10 / ASIN: 0815513739 * ISBN-13 / EAN: 9780815513735 Book Description: Since the publication of the first edition 10 years ago, significant developments have occurred in the use of admixtures in concrete. Eight new chapters and a full update of the preceding 10 chapters bring this book up to date; reflecting the relative advances made in the science and

technology of different groups of admixtures. The increased role and development of admixtures in concrete technology is evidenced by a number of conferences, publications, and novel admixtures available in the market place. These developments in the field caused the modification of many chapters in the First Edition in order to reflect the advances. Although individual chapters refer to standards and specifications of admixtures, those only interested in the standards or techniques used in investigating admixtures will find the second chapter (Research Technologies, Standards, and Specifications) useful. Admixtures are not as inert as may be presumed. They may chemically interact with the constituents of concrete and affect the properties of the fresh and hardened concrete and its durability. The third chapter deals with these aspects. It was important to devote a chapter to recent attempts in developing new admixtures. This publication will be useful to many readers including: technologists, practitioners, engineers, architects, concrete manufacturers, material scientists, cement scientists, and students 55.613 MB http://mihd.net/a3fjon http://www.filefactory.com/file/dc20dd/ http://rapidshare.com/files/88405886/Concrete_Admixtures_Handbook.rar

Concrete and Masonry Databook By Christine Beall, Rochelle Jaffe * Publisher: McGraw-Hill Professional * Number Of Pages: 700 * Publication Date: 2002-09-26 * ISBN-10 / ASIN: 0071361545 * ISBN-13 / EAN: 9780071361545 * Binding: Hardcover

Book Description: Concise answers to all your questions about concrete and masonry

It's all here: the concrete and masonry information you need to work more efficiently, avoid costly problems and mistakes, minimize risk, reduce waste...and maximize profits! Industry experts Christine Beall and Rochelle Jaffe save you countless hours of searching through dozens of manuals or esoteric pamphlets, presenting the data in a quick-find, straightforward, heavily illustrated format. You get fingertip access to valuable practice tools and job-simplifying material, including more than 1000 tables, charts, graphs, and line drawings…guidance on thermal, fire, and weather resistance…current ASTM, ACI, and TMS standards…UBC, MSJC, and IBC code requirements…essential concrete and masonry data…listings of industry standards. You can count on thorough, detailed coverage of key topics, including: products and materials; mortar, grout, and concrete mixes; form work and reinforcements; site and landscape elements; wall and floor systems; and much more. Invaluable for those working in both the commercial and residential markets, here is the single definitive volume on concrete and masonry.

Size: 25.84 MB http://mihd.net/cydr9t http://rapidshare.com/files/77261746...y_Databook.rar http://www.filefactory.com/file/91a082

Publisher: Butterworth-Heinemann Number Of Pages: 368 Publication Date: 2004-03-18 ISBN-10 / ASIN: 0750659122 ISBN-13 / EAN: 9780750659123 Book Description: This classic textbook is a comprehensive introduction to structural steelwork design.The book describes the design theory and code requirements for common structures, connections, elements and frames. The book is structured to meet the needs of courses in structural steelwork, introducing and explaining each concept before allowing the student to test the knowledge with practical examples. Each section is illustrated with exercises for the student to reinforce their learning. This book continues to be an indispensable introduction to structural steelwork design for students of structural and civil engineering. This book continues to be an indispensable introduction to structural steelwork design for students of structural and civil engineering *Updated to reflect the 2000 Amendment to Part 1 of BS5950. *Practical examples of methods and techniques throughout. *Exercises accompany each chapter. Format: PDF Archive: RAR Size: 2.21 MB

http://rapidshare.com/files/82502035/0750659122.rar

Mirror : http://mihd.net/zkrd39

The Structural Design of Air and Gas Ducts for Power Stations and Industrial Boiler Applications By American Society Of Civil Engineers * Publisher: American Society of Civil Engineers * Number Of Pages: 296 * Publication Date: 1995-08 * ISBN-10 / ASIN: 0784401128 * ISBN-13 / EAN: 9780784401125

http://mihd.net/016vjz http://www.filefactory.com/file/27256f/

Advanced Earthquake Engineering Analysis (CISM International Centre for Mechanical Sciences) By Alain Pecker * Publisher: Springer * Number Of Pages: 214 * Publication Date: 2007-10-12 * ISBN-10 / ASIN: 3211742131 * ISBN-13 / EAN: 9783211742136 Book Description: During the last decade, the state of the art in Earthquake Engineering Design and Analysis has made significant steps towards a more rationale analysis of structures. Scientists have long recognized that earthquake design is guided by displacements and deformations rather than forces. However due to the historical background of structural engineers in static analyses, effects of earthquake on structures have been viewed as forces acting on the structures. All presently available design building codes are developed along these lines. Our knowledge of ground motion characteristics, earthquake geotechnical engineering, structural behaviour (design

and numerical analyses) and model tests have advanced to a point where it is possible to anticipate a significant move from force based design approaches to displacements based design approaches. Although displacement based analyses constitute the kernel of most research programs, they have not yet been incorporated in the state of practice. The purpose of the book is to review the fundamentals of displacement based methods, starting from engineering seismology, earthquake geotechnical engineering, to focus on design, analysis and testing of structures with emphasis on buildings and bridges PDF File Size : 4865 KB http://www.filefactory.com/file/898de7/ http://rapidshare.com/files/86680622/Advanced_EarthquakeEngineeringAnalysis.p df

Structural Steelwork: Analysis and Design By S. S. Ray * Publisher: Wiley-Blackwell * Number Of Pages: 592 * Publication Date: 1998-10-26 * ISBN-10 / ASIN: 0632038578 * ISBN-13 / EAN: 9780632038572 Book Description: This manual, a companion to the book Reinforced Concrete, also by Ray, covers the design of structural steelwork elements in a logical, step-by-step fashion. The text is backed up by numerous illustrations, design charts and tables, and refers throughout to the relevant codes of practice. A large number of worked examples cover almost all types of structural steelwork elements, including more advanced techniques Size: 24.337 KB ~ PDF http://mihd.net/hv5icb http://www.filefactory.com/file/29eb0f/ http://rapidshare.com/files/84415147/0632038578.rar.html

Steel Structures: Design and Behavior (4th Edition) By Charles G. Salmon, John E. Johnson * Publisher: Prentice Hall * Number Of Pages: 1024 * Publication Date: 1997-01-17 * ISBN-10 / ASIN: 0673997863 * ISBN-13 / EAN: 9780673997869 Summary: The best steel design reference This book covers the basics and fundamentals of steel design in such a way that provides a great reference for the structural engineering student or professional. Possibly the best book you can find in the field. I've been using it since graduate school and through the years as a consultant in structural engineering 35 MB ‫كود‬: http://mihd.net/x8clpj http://www.filefactory.com/file/1a8b47/ http://rapidshare.com/files/83907912/steel_structures_design___behaviour_Salm an___Johnson_.pdf

Organic Materials in Civil Engineering By Yves Mouton

* Publisher: ISTE Publishing Company * Number Of Pages: 320 * Publication Date: 2008-02-04 * ISBN-10 / ASIN: 1905209118 * ISBN-13 / EAN: 9781905209118 * Binding: Hardcover

Book Description: This book provides an inventory of organic materials and products, the major components of all civil engineering projects, in terms of their scientific and technical background, including the regulations that cover their use and their predicted useful life. Such materials include: bitumen on the roads; geotextiles for retaining walls; membranes for bridges; tunnel and reservoir waterproofing; paint binders to protect metallic and concrete structures or to create road markings; injection resins; gluing products; concrete admixtures; and composite materials. The presentation is based on a physicochemical approach, which is essential if these products are to be considered as part of sustainable development: as such, those studying or working in these fields will find this an invaluable source of information.

http://mihd.net/5a2p6c or http://rapidshare.com/files/82951745/1905209118.rar

Strengthening of Reinforced Concrete Structures By * Publisher: Woodhead Publishing * Number Of Pages: 352 * Publication Date: 1999-03 * ISBN / ASIN: 1855733781 http://mihd.net/jztbuy http://rapidshare.com/files/6894458/...Structures.rar

or http://www.4shared.com/file/10626190...tructures.html

Failed Stone: Problems and Solutions with Concrete and Masonry By Patrick Loughran * Publisher: Birkhäuser Basel * Number Of Pages: 159 * Publication Date: 2006-11-21 * ISBN-10 / ASIN: 3764373296 * ISBN-13 / EAN: 9783764373290 Book Description: Concrete and stone seem made to last forever. But the fact is they develop problems. It is not always as dramatic as the collapse of a section of the roof of the Paris Charles de Gaulle airport in 2004. Gradual changes also occur that may compromise the appearance and structural soundness of buildings constructed with these materials. These changes can be created by efflorescence, thermal stress, weathering, leakage and corrosion. This book explains how to avoid typical kinds of failure. With this in mind, it systematically analyzes cases of damage in contemporary international architecture. It also offers strategies for minimizing the risk of damage. Examples include such high-visibility structures as Finlandia Hall in Helsinki, Parco della Musica in Rome and Vontz Center for Molecular Studies in Cincinnatti. In eight chapters, typical kinds of damage are explained and illustrated with examples

PDF Size : 19520 KB http://www.filefactory.com/file/d3bc9c/ http://rapidshare.com/files/81378597/FS.pdf

Lightweight Aggregate Concrete By Satish Chandra, Leif Berntsson * Publisher: Noyes Data Corporation/Noyes Publications * Number Of Pages: 450 * Publication Date: 2002-06-15 * ISBN-10 / ASIN: 0815514867 * ISBN-13 / EAN: 9780815514862 Book Description: Written to give an overall picture of LWAC, from the historical background of aggregate production, proportioning and production of concrete, to applications in structural and physical properties. Discusses the historical background of lightweight aggregate concrete

3.31MB http://www.filefactory.com/file/0cf62b/ http://rapidshare.com/files/80699445/Lightweight_Aggregate_Concrete.rar

Metal Building Systems: Design and Specifications By Alexander Newman * Publisher: McGraw-Hill Professional * Number Of Pages: 576 * Publication Date: 2003-11-28 * ISBN / ASIN: 0071402012 $80.05 This book from an expert on metal building systems--the first an author unaffiliated with an industry trade group--offers important, valuable, and unbiased information that can save you money and time--and that may even save your building! Full of essential features, tips and advice, this guide goes beyond manufacturer-supplied information to warn you of potential design pitfalls and to point out specific recurring problems and failures of MBS drawn from actual experience. It provides specific help--unavailable elsewhere--with specifying and

selecting secondary framing, walls, roofs, and much, much more. This is the one book that is a must-have for any professional involved with pre-engineered buildings

Archive: RAR Size: 9437 KB http://rapidshare.com/files/67854733/0071402012.rar

Construction of Marine and Offshore Structures, Third Edition By Jr, Ben C. Gerwick * Publisher: CRC * Number Of Pages: 813 * Publication Date: 2007-03-05 * ISBN-10 / ASIN: 0849330521 * ISBN-13 / EAN: 9780849330520 Book Description: For two decades, Ben Gerwick's ability to capture the current state of practice and present it in a straightforward, easily digestible manner has made Construction of Marine and Offshore Structures the reference of choice for modern civil and maritime construction engineers. The third edition of this perennial bestseller continues to be the most modern and authoritative guide in the field. Based on the author's lifetime of experience, the book also incorporates relevant published information from many sources. Updated and expanded to reflect new technologies, methods, and materials, the book includes new information on topics such as liquefaction of loose sediments, scour and erosion, archaeological concerns, high-performance steel, ultra-highperformance concrete, steel H piles, and damage from sabotage and terrorism. It features coverage of LNG terminals and offshore wind and wave energy structures. Clearly, concisely,

and accessibly, this book steers you away from the pitfalls and toward the successful implementation of principles that can bring your marine and offshore projects to life 17.53MB http://mihd.net/ehulpz http://www.filefactory.com/file/af9c85/ http://rapidshare.com/files/80438156/Construction_of_Marine_and_Offshore_Stru ctures__Third_Edition.rar

The Seismic Design Handbook By Farzad Naeim * Publisher: Springer * Number Of Pages: 848 * Publication Date: 2001-03-31 * ISBN-10 / ASIN: 0792373014 * ISBN-13 / EAN: 9780792373018 Book Description: The Seismic Design Handbook is a primary resource for both researchers and teachers in the

field of earthquake-resistant design. The first edition of this handbook was received with much enthusiasm. It is the de-facto textbook for teaching seismic design principles at many major universities. In the United States, UC Berkeley, Stanford, UCLA, University of Southern California, SUNY Buffalo, the University of Illinois, Washington University, the University of Texas at Austin, Georgia Tech, Cornell, and the University of Michigan have adopted the text. Abroad, the Imperial College of London and the Israel Institute of Technology are among its adopters. This second edition contains up-to-date information on planning, analysis, and design of earthquake-resistant building structures. Its intention is to provide engineers, architects, developers, and students of structural engineering and architecture with authoritative, yet practical, design information. It bridges the gap between advances in the theories and concepts of seismic design and their implementation in practice. This handbook has been endorsed by the International Conference of Building Officials. It contains a CD-ROM with applicable building code references and recommended practices. Audience: The Seismic Design Handbook is a must for practicing engineers, architects, building officials, developers, teachers, and students in the field of earthquake-resistant building design. Its distinguished panel of contributors is made up of 22 experts from industry and universities, recognized for their knowledge and extensive practical experience in their fields Size: 90.651 KB Filetype: PDF http://mihd.net/j256ko http://www.filefactory.com/file/992154/ http://rapidshare.com/files/80373952/seismic_design_handbook_all_chapters.pdf

Corrosion of Steel in Concrete: Prevention, Diagnosis, Repair By Pietro Pedeferri, Rob B. Polder Publisher: Wiley-VCH Number Of Pages: 409 Publication Date: 2004-03-19 ISBN / ASIN: 3527308008 Reinforced concrete has been developed and applied extensively in the 20th century .It combines the good compressive strength of concrete with the high tensile strength of steel and has proven to be successful in terms of structural performance and durability. However, there are instances of premature failure of reinforced concrete and prestressed concrete components due to corrosion of the reinforcing steel with very high economic implications of such damage. This book focuses on the chloride and carbonation induced corrosion of steel in concrete, presenting transport mechanisms and electrochemical concepts. Other types of corrosion of steel and degradation of concrete are also treated. The main emphasis lies on design and execution aspects related to durability of new and existing structures. New methods and materials for preventative measures, condition assessment and repair techniques are discussed. This makes this book an invaluable reference for any engineer and materials scientist involved in research and practice of corrosion protection, rehabilitation and maintenance of reinforced concrete structures and components. Owners, designers and contractors will profit by this updated state of the art

http://rapidshare.com/files/11921921...and_repair.pdf

http://rapidshare.com/files/17988933...crete.rar.html http://www.bestsharing.com/f/r1wpvCP230925 http://www.bestsharing.com/f/ms001149163

ISBN: 0419196307 Title: Corrosion of Steel in Concrete Author: J.P. Broomfield Publisher: Taylor & Francis Publication Date: 1996-12-01 Number Of Pages: 264 The corrosion of reinforcing steel in concrete is a major problem facing civil engineers and surveyors throughout the world today http://rapidshare.com/files/11921921...and_repair.pdf

Computational Mechanics in Structural Engineering By F.Y. Cheng, Yuanxian Gu, * Publisher: Elsevier Science * Number Of Pages: 392 * Publication Date: 1999-03-01 * ISBN / ASIN: 0080430082 * EAN: 9780080430089 Buy New $235.00 The Second Sino-US Symposium Workshop on Recent Advancement of Computational Mechanics in Structural Engineering was held between May 25-28, 1998, in Dalian, China. The objectives were: to share the insights and experiences gained from recent developments in theory and practice; to assess the current state of knowledge in various topic areas of mechanics and computational methods and to identify joint research opportunities; to stimulate future cooperative research and to develop joint efforts in subjects of common needs and interests; to build and to strengthen the long-term bilateral scientific relationship between academic and professional practicing communities. Topics discussed covered the entire field of computational structural mechanics. These topics have advanced broad applications in the engineering practice of modern structural analysis, design and construction of buildings and other structures, and in natural hazard mitigation

RAR'd PDF, 17851 KB http://rapidshare.com/files/77442540/0080430082.rar

Advanced Civil Infrastructure Materials: Advancements in Science and Mechanics By * Publisher: Woodhead Publishing Ltd * Number Of Pages: 376 * Publication Date: 2006-04-30 * ISBN / ASIN: 1855739437 * EAN: 9781855739437 3.26 Mb pdf http://rapidshare.com/files/75926654...frastructu.pdf

Soil Behaviour in Earthquake Geotechnics (Oxford Engineering Science Series) By Kenji Ishihara * Publisher: Oxford University Press, USA * Number Of Pages: 360 * Publication Date: 1996-08-31 * ISBN / ASIN: 0198562241 * EAN: 9780198562245 Best Price $414.99 This highly topical book, written by a leading Japanese author, provides a comprehensive study of current research in soil dynamics for earthquake engineering. The behaviour of the ground on which structures are built during earthquake conditions is crucial to understanding the behaviour of those structures. This well-illustrated text summarizes current knowledge of the subject, presenting material accumulated by Japanese and other researchers over recent years. It comprehensively covers theory, laboratory tests, and field work. It also includes helpful guidelines for civil engineers undertaking groundwork to protect structures in potential earthquake zones

PDF Size: 14.64 MB http://mihd.net/uxryib http://rapidshare.com/files/74532815/0198562241.pdf

Tony Hunt's Structures Notebook, Second Edition By Tony Hunt * Publisher: Architectural Press * Number Of Pages: 96 * Publication Date: 2003-06-30 * ISBN-10 / ASIN: 0750658975 * ISBN-13 / EAN: 9780750658973 The purpose of the Structures Notebook is to explain, in the simplest possible terms, about the structure of 'things', and to demonstrate the fact that everything you see and touch, live in and use, living and man-made, has a structure which is acted upon by natural forces and reacts to these forces according to its form and material. The Structures Notebook was originally written by Tony Hunt as a brief teaching aid for students at the Royal College of Art who had very little, if any, knowledge of physics or structural behaviour. It has now been expanded, and with this second edition, updated, into a more comprehensive book while retaining a simple visual and non-mathematical approach to

structures. The book is divided into seven main sections, in a logical sequence, and is written in simple language. Each section, related to its text, has a comprehensive set of hand-drawn sketches which show, as simply as possible, what the text is about. The book is almost totally nonmathematical since the author believes very strongly that structural behaviour can be understood best by diagrams and simple descriptions and that mathematics for the majority of people interested in design is a barrier. The design of structures is a combination of art and science and to achieve the best solution, concept should always come before calculation. * Includes a new chapter with twelve further inventive solutions from well-known engineers * Hundreds of illustrations communicate a clear understanding of the subject, without mathematics * Comprehensive coverage of key information, with examples and insights from this influential structural engineer

RAR'd PDF, 1815 KB http://rapidshare.com/files/74623859/0750658975.rar

Soil Mechanics (Wiley Series in Geotechnical Engineering) By T. William Lambe, Robert V. Whitman, * Publisher: Wiley * Number Of Pages: 576 * Publication Date: 1969-01-01 * ISBN / ASIN: 0471511927 Soil Mechanics - 47 MB

Mihd Rapidshare 4shared

password to access the file: hong

Structural Steelwork for Students By L. V. Leech * Publisher: Butterworth-Heinemann * Number Of Pages: 88 * Publication Date: 1988-06 * ISBN-10 / ASIN: 0408029706 * ISBN-13 / EAN: 9780408029704 Zipped PDF. 8M. No passwoord http://rapidshare.com/files/71278142/SSS_2ed.zip.html

IBC 2003 http://rapidshare.de/files/21529037/..._ICC_.rar.html or http://www.savefile.com/files.php?fid=3251902

International Building Code - Softcover Version: Softcover Version (International Building Code) By International Code Council Publisher: Thomson Delmar Learning Number Of Pages: 666 Publication Date: 2006-03-06 ISBN / ASIN: 1580012515 The scope of this code covers all buildings except 3-story one- and two-family dwellings and townhomes. This comprehensive code features time-tested safety concepts, structural and fire and life safety provisions covering means of egress, interior finish requirements, comprehensive roof provisions, seismic engineering provisions, innovative construction technology, occupancy classifications, and the latest industry standards in material design. It is founded on broadbased principles that make possible the use of the new materials and new building designs http://mihd.net/7.563/2006_IBC.rar.html or mihd.net or http://depositfiles.com/files/385426

Fundamentals of Structural Stability By George Simitses, Dewey H Hodges, * Publisher: Butterworth-Heinemann * Number Of Pages: 480 * Publication Date: 2005-10-01 * ISBN / ASIN: 0750678755 $71.95 Book Description: The ability of a structural assembly to carry loads and forces determines how stable it will be over time. Viewing structural assemblages as comprising columns, beams, arches, rings, and plates, this book will introduce the student to both a classical and advanced understanding of the mechanical behavior of such structural systems under load and how modeling the resulting strains can predict the overall future performancethe stabilityof that structure. While covering traditional beam theory, the book is more focused on elastica theory in keeping with modern approaches. This text will be an expanded and updated version a similar, previously published book, but with pedagogical improvements and updated analytical methods. This engineering textbook will provide a focused treatment on the study of how structures

behave and perform when under stress loading, including plastic deformation and buckling. All advanced engineering students studying engineering mechanics, structural analysis and design, fatigue and failure, and other related subjects need to have this knowledge, and this book will provide it in a thorough and coherent fashion. Written by two of the worlds leading engineering professors in this subject area, the pedagogy has been classroom-tested over many years and should find a receptive readership among both students and instructors. * An understandable introduction to the theory of structural stability, useful for a wide variety of engineering disciplines, including mechanical, civil and aerospace engineering * Covers both static and dynamic loads, for both conservative and nonconservative systems * Emphasizes elastic behavior under loads, including vertical buckling, torsional buckling and nonlinear affects of structural system buckling and stability * Case examples to illustrate real-world applications of Stability Theory

http://rapidshare.com/files/65251905/9780750678759.rar

Reinforced Concrete Design Theory http://www.4shared.com/file/25581221...ified=9ace4cae or http://up.9q9q.net/up/index.php?f=Bb9jihx1W

Sustainable Building Technical Manual http://z32.zupload.com/download.php?...filepath=16922

Architecture Sustainable Building Design PDF | 100 Pages | 8.95 MB The 2005 World Sustainable Building Conference in Tokyo, Student Session 23-29 September 2005, Tokyo, Japan, with 95 project from all the world - very interesting work 9385 KB RAR'd PDF http://rapidshare.com/files/55269132...ing.Design.rar

Building Services Handbook, Fourth Edition: Incorporating Current Building & Construction Regulations (Building Services Handbook) (Building Services Handbook) By Fred Hall, Roger Greeno, * Publisher: Butterworth-Heinemann * Number Of Pages: 576 * Publication Date: 2007-05-28 * ISBN / ASIN: 0750682205 Building Services Handbook summarises the application of all common elements of building services practice, technique and procedure, to provide an essential information resource for students and engineers working in the industry. Information is presented in the highly illustrated and accessible style of the best-selling companion title Building Construction Handbook. This new edition contains extended information on water system components, control systems for hot water and heating, ventilation and air conditioning, drainage, gas appliance flues and

further examples of design calculations. It has been revised and expanded to take into account recent amendments to the Building Regulations Approved Documents and guidance from British and European Standards. Online lecture facilities include PowerPoint slides illustrating a selection of services areas, providing key diagrams for use with presentations and handouts. THE comprehensive reference for all construction and building services students, Building Services Handbook is ideal for a wide range of courses including NVQ and BTEC National through Higher National Certificate and Diploma to Foundation and three-year Degree level. The clear illustrations and complementary references to industry Standards combine essential guidance with a resource base for further reading and development of specific topics. Roger Greeno is a well-known author of construction texts. He has extensive practical and consultancy experience in the industry, in addition to lecturing at several colleges of further and higher education, and the University of Portsmouth. He has also examined for City & Guilds, Edexcel, the Chartered Institute of Building and the University of Reading. Fred Halls books on Building Services have helped thousands of students gain their qualifications and pass exams. He was formerly a Senior Lecturer at Guildford College.

* No other book offers the same clarity of diagrams and scope of information * Allows the reader to quickly get to grips with each topic * Updated to explain what recent energy conservation measures really MEAN

PDF File 9.05mb RAR download http://rapidshare.com/files/67966424/0750682205.rar

ISBN: 0751402419 Title: Testing of Concrete in Structures Author: J.H. Bungey J. H. Bungey S. G. Millard Publisher: Routledge Publication Date: 1995-12-01 Number Of Pages: 286 This book provides a comprehensive overview of the techniques involved in testing concrete in structures. The non-specialist civil engineer involved in assessment, repair or maintanance of concrete structures will find this a thorough update of the second edition, with an expansion of those areas where recent developments have made significant advances, for example in integrity assessment _________________________ http://mihd.net/u8nqah or http://rapidshare.com/files/11131582...tures.rar.html

ISBN: 0070288143 Title: Handbook of Civil Engineering Calculations Author: Tyler G. Hicks Publisher: McGraw-Hill Professional Publication Date: 1999-08-31 Number Of Pages: 800 Handle every day-to-day calculation instantly and accurately. Now, a single authoritative reference offers you a surefire way to save time handling routine and non-routine calculations in the design, construction, rehab and maintenance of all types of structures. Edited by Tyler G. Hicks, Handbook of Civil Engineering Calculations explains and illustrates over 500 key calculations covering the entire field: structural steel engineering and design; reinforced and prestressed concrete; timber engineering; soil mechanics; surveying, route design, and highway bridges; fluid mechanics; pumps, piping, and hydro power;water supply and stormwater; sanitary wastewater treatment and control; and engineering economics.Using both customary and SI units, each calculation procedure includes a worked-out example with numbered steps. You see exactly how to compute the desired values for a particular design, and go quickly from data to finished design

http://www.bestsharing.com/files/uc8...tions.rar.html

ISBN: 0849322944 Title: Soil Engineering: Testing, Design, and Remediation Author: Fu Hua Chen Publisher: CRC Publication Date: 1999-09-28 Number Of Pages: 304 The book provides the practical meaning of the various aspects of soil mechanics, the use of unconfined compression test data, the meaning of consolidated tests, the practical value of lateral pressure, and more. In addition to the technical aspect of foundation investigation, in the real world the shadow of litigation looms over every consultant's head. The author covers these issues in detail.

____________________________ http://rapidshare.com/files/12824872/SOENGI.rar

pass: tFSOENGI.rar

ISBN: 0751400793 Title: Manual of Ready-Mixed Concrete Author: R Anderson Publisher: Routledge Publication Date: 1992-12-22 Number Of Pages: 256 This edition of this successful manual has been carefully revised throughout to take account of recent changes and to incorporate amendments required due to the publication of the revised BS 5328. This manual provides information on all aspects of the ready-mixed concrete industry, from the basic materials and their properties to the production, quality control and the use of ready-mixed concrete. Discussion of the qualities of concrete and the achievement of quality requirements leads to the consideration of specifying concrete quantities. Attention is then turned from production to delivery. The authors discuss arguments for choosing ready-mixed concrete, and deal with the fundamental issues of obtaining quotations, ordering and handling. While providing a detailed ready reference, this book also gives the reader a perspective on the industry as a whole 'this book will prove indispensable to technical and sales personnel in the concrete industry, and to civil and structural engineers, contractors, architects, and surveyors. Graduate trainees and advanced students will find it a valuable source of reference.' - Concrete Plant and Production 'The book provides a detailed ready reference for individual sectors of the industry, while at the same time providing the reader with useful perspective on the industry as a whole...this book will provide perspective indispensable to technical and sales personnel in the concrete industry, and to civil and structural engineers, contractors, architects, and surveyors.' - Concrete Abstracts

'This is a proper manual; it will be of great help to anyone wishing to understand and/or participate in the whole process (and service, as the authors would claim) of providing ready-mixed concrete...It should be noted and welcomed by all sectors of the industry and is a major contribution to the topics...it is excellent value and strongly recommended: the authors deserve congratulations and their industry is lucky to have such representatives.' - Construction and Building Materials

Introduction ready-mixed concrete. Materials for concrete. Properties of fresh concrete. Properties of hardened concrete. Mix design. Statistics for quality control, mix design and compliance. Quality control. Sampling and testing ready-mixed concrete. Part 2 - Practice. Production, delivery and quality assurance. Specifications and supervision. Ready-mixed concrete on site. Organizations. Appendix 1- QSRMC technical schedule. Appendix 2 - conversion factors.

____________________________________ http://rapidshare.com/files/13822084...part1.rar.html http://rapidshare.com/files/13824950...part2.rar.html

Structural Details in Concrete By M. Y. H. Bangash Publisher: Blackwell Science Inc Number Of Pages: 272 Publication Date: 1992-08 ISBN / ASIN: 063202853X http://mihd.net/uxkf96 OR http://rapidshare.de/files/22577434/...ific_1992_.pdf

Principles of Structural Design By * Publisher: CRC * Number Of Pages: 528 * Publication Date: 2005-10-31 * ISBN / ASIN: 0849372356 Many important advances in designing high-performance structures have occurred over the last several years. Structural engineers need an authoritative source of information that thoroughly and concisely covers the foundational principles of the field. Comprising chapters selected from the second edition of the best-selling Handbook of Structural Engineering, this book provides a tightly focused, economical guide to the theoretical, practical, and computational aspects of structural design. Expert contributors discuss a wide variety of structures, including steel, aluminum, timber, and prestressed concrete, as well as reliability-based design and structures based on wind engineering

http://mihd.net/548z6y

Handbook of Structural Engineering, Second Edition Summary Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The authors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind and earthquake-resistant design; design of prestressed structures; high-performance steel, concrete, and fiberreinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety

http://rapidshare.de/files/21198651/...ering.rar.html

password: ebooksclub

Concrete Formwork Systems Author: Awad S. Hanna Publisher: CRC Publication Date: 1998-10-01 Number Of Pages: 272 Offers insights on currently-used concrete formwork structures, from classification, system components and materials’ properties to selection and construction requirements and procedures, while considering product quality, labour, safety and economic factors throughout. The text details hand-set, crane-dependent and crane-independent systems

http://rapidshare.com/files/10841109...0824700724.rar

Post-tensioning is the most versatile form of pre stressing, a technique which enables engineers to make the most effective use of the material properties of concrete, and so to design structural elements which are strong, slender and efficient. Design in post-tensioned concrete is not difficult and, if done properly, can contribute significantly to the economy and the aesthetic qualities of a building. Post-tensioned floors have found widespread use in office buildings and car park structures

http://www.savefile.com/projects/1015063

Wodek K. Gawronski «Advanced Structural Dynamics and Active Control of Structures» Springer | ISBN 0387406492 | 2004 Year | PDF | 4,71 Mb | 396 Pages

Series Preface Preface List of Symbols 1 Introduction to Structures 1 2 Standard Models 13 3 Special Models 41 4 Controllability and Observability 65 5 Norms 109 6 Model Reduction 143 7 Actuator and Sensor Placement 167 8 Modal Actuators and Sensors 203 9 System Identification 219

10 Collocated Controllers 235 11 LQG Controllers 249 12 H[subscript [infinity]] and H[subscript 2] Controllers 287 App. A Matlab Functions 319 App. B Matlab Examples 337 App. C Structural Parameters 371 References 379 Index 389 The book presents and integrates the methods of structural dynamics, identification and control into a common framework. It aims to create a common language between structural and control system engineers

http://mihd.net/7.1225/WKGawronski.rar.html or http://www.oxyshare.com/get/23144595644fcaa253ee37/WKGawronski.rar.html or http://rapidshare.de/files/31983736/WKGawronski.rar.html

ISBN: 0070087822 Title: Structural Steel Designer's Handbook, 3rd edition, 1999-11 Author: Roger L Brockenbrough, Frederick S. Merritt Publisher: McGraw-Hill Professional Publication Date: 1999-11-11 Number Of Pages: 1208 The only A-Z guide to structural steel design Find a wealth of practical techniques for cost-effectively designing steel structures from buildings to bridges in Structural Steel Designer's Handbook by Roger L. Brockenbrough and Frederick S. Merritt The Handbook's integrated approach gives you immediately useful information about: *steel as a material - how it's fabricated and erected *how to analyze a structure to determine internal forces and moments from dead, live, and seismic loads how to make detailed design calculations to withstand those forces This new third edition introduces you to the latest developments in seismic design, including more ductile connections, and high performance steels...offers an expanded treatment of welding....helps you understand design requirements for hollow structural sections and for cold-formed steel members....and explores numerous design examples. You get examples for both Load and Resistance Factor Design (LRFD) and Allowable Stress Design (ASD).

http://mihd.net/v0h86z or http://rapidshare.com/files/12420756...kademi.org.rar pass: www.forumakademi.org

or http://rapidshare.com/files/3558157/...s_handbook.rar

Design of Steel Bridges Theory and Practice for the Use of Civil Engineers and Students By F. C Kunz * Publisher: McGraw-Hill Book Co * Number Of Pages: 472 * Publication Date: 1915 * ISBN-10 / ASIN: B000876HBQ * ISBN-13 / EAN: $195.00 PDF (10 Mb) http://library.case.edu/ksl/ecoll/bo...0/kundes00.pdf Use Flashget or Save target as

Code of Practice for the Structural use of Steel-2005 The Government of the Hong Kong Special Administrative Region First published: August 2005 Prepared by: Buildings Department 12/F-18/F Pioneer Centre, 750 Nathan Road, Mongkok, Kowloon, Hong Kong Consultant: Joint Venture Consultancy from The Hong Kong Polytechnic University and Ove Arup & Partners Hong Kong Limited directed by Ir Professor S.L. Chan, Ir K.K. Kwan, Ir Professor K.F. Chung and Ir Dr. D.G. Vesey. =================================================

The code contains clauses on materials and workmanship for fabrication and erection.

excerpt: FOREWORD Codes and regulations for the design of steel structures in Hong Kong were initially derived from the London Byelaws and then BS 449. In 1987 Hong Kong published its own code based on the permissible stress design for the use of structural steel. In recognition of the stated aim of The Government of The Hong Kong Special Administrative Region to develop a technology driven and knowledge based society, the Hong Kong Buildings Department commissioned a Consultancy Study to carry out reviews of structural steel design practice in Hong Kong and overseas and to draft a new limit state code for the Structural Use of Steel using Limit State Approach. The study was carried out by a joint venture consultancy formed from The Hong Kong Polytechnic University and Ove Arup & Partners Hong Kong Limited. The code is intended to encourage the use of structural steel to the benefit of stakeholders, the environment and the society. It offers the potential of wider use in the region. The code has been developed using worldwide best practice and philosophy from international codes. Particular guidance has been introduced to the Code to cover high rise building design, composite design, long span structures, stability issues, temporary works in construction, a wide range of steel grades, performance based design and structural vibration. The code is intended to be easy for use by practicing engineers. Use of materials is covered by reference to internationally accepted equivalent standards and by clarifying procedures for demonstrating compliance of materials which fall outside these standards. The Code contains clauses on materials and workmanship for fabrication and erection. This Code of Practice provides full guidance on how the requirements of the Buildings Ordinance may be complied with http://rapidshare.com/files/50307730...e_of_Steel.pdf

Masonry Design and Detailing By Christine Beall * Publisher: McGraw-Hill Professional * Number Of Pages: 640 * Publication Date: 2003-12-12 * ISBN / ASIN: 0071377344 $88.95 Reflecting vital changes in the uniform Building Code, the MSJC Code, and ASTM standards, as well as the latest insight into evolving materials, systems, and technology, the Fourth Edition is a current, hands-on guide that illuminates every important aspect of masonry, from all types of wall systems to material specs to building code compliance. Included is new information on mortar selection, flashing materials, seismic anchors, CMU retaining wall system recycling and sustainability, construction submittals, uniform Building Code and MSJC Masonry Code requirements, and much more Archive: RAR Size: 13.75 MB http://mihd.net/quhjkb http://rapidshare.com/files/67618276/0071377344.rar

Construction Databook By Sidney M. Levy * Publisher: McGraw-Hill Professional * Number Of Pages: 688 * Publication Date: 1998-10-30 * ISBN / ASIN: 0070383650 $76.46 Book Description: Stay on top of construction details and procedures with the help of this illustrated data handbook. It offers fast access to hundreds of tables, charts, diagrams, and illustrations, covering all the components of construction utilized at a typical job site.This complete reference manual will provide you wiht a single source of specifications, codes, checklists, conversion factors, and "how-to" instructions for the most commonly used construction materials, including lumber, masonry, concrete, steel, doors, windows, hardware, and mechanical and electrical components

Archive: RAR Size: 68.09 MB

http://mihd.net/7pz3qt http://rapidshare.com/files/67600099/0070383650.rar

Masonry and Concrete By Christine Beall * Publisher: McGraw-Hill Professional * Number Of Pages: 400 * Publication Date: 2000-08-25 * ISBN / ASIN: 0070067066 Book Description: The only all-inclusive, accessible reference for all aspects of building with masonry and concrete for residential purposes - ideal for residential builders, contractors, remodelers, and other professionals Part of the Complete Construction Series, this design-it, specify-it, and build-it source aids decision-making and construction performance by illustrating and explaining the function and behavior of each material Provides problem-avoiding insights into installation, construction, storage, and cleaning techniques - filled with tables, graphs, and over 100 illustrations Archive: RAR Size: 5.47 MB http://mihd.net/a0fdou http://rapidshare.com/files/67469736/0070067066.rar

Design of Prestressed Concrete By R.I. Gilbert * Publisher: Routledge * Number Of Pages: 515 * Publication Date: 2004-09-01 * ISBN / ASIN: 0419161600 Best Price $127.13 Book Description: Providing both an introduction to basic concepts and an in-depth treatment of the most up-todate methods for the design and analysis of concrete of structures, Design of Prestressed Concrete will service the needs of both students and professional engineers 28.2 MB http://rapidshare.com/files/13273865...d_Concrete.rar

Formulas for Structural Dynamics: Tables, Graphs and Solutions By Olga Lebed, Igor A. Karnovsky, Igor Karnovsky, * Publisher: McGraw-Hill Professional Publishing * Number Of Pages: 520 * Publication Date: 2000-10-11 * ISBN / ASIN: 0071367128 $40.00 Book Description: * This information-rich reference book provides solutions to the architectural problem of vibrations in beams, arches and frames in bridges, highways, buildings and tunnels * A must-have for structural designers and civil engineers, especially those involved in the seismic design of buildings * Well-organized into problem-specific chapters, and loaded with detailed charts, graphs, and necessary formulas Archive: RAR Size: 9.56 MB http://rapidshare.com/files/66972564/0071367128.rar http://mihd.net/21i0cz

Foundation Engineering Handbook: Design and Construction with the 2006 International Building Code, 1st edition By Robert W. Day * Publisher: McGraw-Hill Professional * Number Of Pages: 930 * Publication Date: 2005-11-21 * ISBN / ASIN: 0071447695 $111.60 Book Description: This practical resource focuses on foundation engineering, emphasizing the geotechnical aspects and the use of the International Building Code 1,082 page, OCR-Quality pdf - bookmarked chapters 31 MB Table of *******s and Index are not included in this ebook 2 part RAR: 1x15 MB - 1x11 MB http://rapidshare.com/files/66770359...7695.part1.rar http://rapidshare.com/files/66770883...7695.part2.rar

Stormwater Collection Systems Design Handbook By Larry W Mays * Publisher: McGraw-Hill Professional * Number Of Pages: 1008 * Publication Date: 2001-04-26 * ISBN / ASIN: 0071354719 $100.00 Book Description: * A comprehensive overview of stormwater and wastewater collection methods from around the world, written by leading experts in the field * Includes detailed analysis of system designs, operation, maintenance and rehabilitation * The most complete reference available on the subject Format: PDF (Vector, per chapter bookmarks, *******s & indexes pages missing) Archive: RAR Size: 14542 KB http://rapidshare.com/files/66481881/0071354719.rar

Design of Concrete Structures EUROCODE 2 # Publisher: BSI # Number Of Pages: 194 # ISBN / ASIN: 0580208982 This publication comprises the English version of ENV-1992-1-1-1991Eurocode 2 : Design of Concrete Structures-Part 1: General Rules and Rules for Buildings plus the National Application Document to be used with the ENV IN THE DESIGN OF BUILDINS TO BE CONSTRUCTED IN THE UNITED KINGDOM http://rapidshare.com/files/63594678...structures.pdf

Manual for the Design of Reinforce Concrete Building Structures This Manual provides guidence on the design of reinforced concrete building structures.Structures design with this manual will normally comply with BS 8110. The range of structures and structural elements covered by the manual is limited to the building structures, using normal weight concrete and which do not rely on bending in columns for their resistance to horizontal forces 2926 KB http://rapidshare.com/files/63594566..._Structure.pdf

DYNAMICS OF STRUCTURES” (3nd Edition) by Ray Clough and Joseph Penzien A CSI PUBLICATION Berkeley, CA, February 26, 2004 – Computers and Structures, Inc., is pleased to release the latest revision to Dynamics of Structures, 2nd Edition by Professors Clough and Penzien. A classic, this definitive textbook has been popular with educators worldwide for nearly 30 years. This release has been updated by the original authors to reflect the latest approaches and techniques in the field of structural dynamics for civil engineers. During the past 50 years, Drs. Ray Clough and Joseph Penzien have earned pre-eminence in the engineering community, dedicating their academic lives to improving the understanding of how structures behave when subjected to nature's forces. This 700-page book represents the culmination of that work. It introduces topics suitable for advanced undergraduate students and progresses through more advanced topics, such as non-deterministic analysis of earthquake

response, appropriate for the graduate student and practicing engineer. This book belongs on every engineer’s shelf. Historically, few books in structural engineering have had as much influence on expanding the knowledge base in structural engineering. With this revision, the book remains an extraordinary tool for those teaching structural dynamics and a timely reference for those in professional practice. Volume and educational pricing are available through Computers and Structures, Inc. ABOUT COMPUTERS AND STRUCTURES, INC. Founded in 1975, CSI is recognized worldwide as an innovative leader in the development of software tools for the analysis and design of civil structures. The products of CSI, including SAP2000, ETABS, SAFE, CSiCOL and CSIDetailer, are licensed to thousands of engineering firms in more than 150 countries. PDF Size: 46.13 MB http://mihd.net/ie0mc5 or http://rapidshare.com/files/49268492...ph_Penzien.pdf

Handbook of Structural Engineering, Second Edition By: W.F. Chen(Editor) E.M. Lui Editor ISBN: 0849315697 Publisher: CRC - 2005-02-28 Hardcover | 2 Edition | 1768 Pages 50,527Mo Editorial Reviews Continuing the best-selling tradition of the Handbook of Structural Engineering, this second edition is a comprehensive reference to the broad spectrum of structural engineering, encapsulating the theoretical, practical, and computational aspects of the field. The authors cover traditional and innovative approaches to analysis, design, and rehabilitation. New topics include: fundamental theories of structural dynamics; advanced analysis; wind and earthquakeresistant design; design of prestressed structures; high-performance steel, concrete, and fiberreinforced polymers; semirigid frame structures; structural bracing; and structural design for fire safety. http://www.4shared.com/file/8704190/...gineering.html

Password: ebooksclub

Steel Design Guide-Staggered Truss Framing System http://rapidshare.com/files/56475052...ng_Systems.pdf

Steel Design Guide- Flush and Extended Multiple-Row Moment End-Plate http://rapidshare.com/files/56475053...onnections.pdf

Steel Design Guide-Steel-Framed Open-Deck Parking Structures http://rapidshare.com/files/56475054...Structures.pdf

Steel Design Guide-Fire Resistance of Structural Steel Framing http://rapidshare.com/files/56475055...el_Framing.pdf

Load & Resistance Factor Design: Manual of Steel Construction, Volume II, Connections By American Institute of Steel Construction * Publisher: American Institute of Steel Construction * Number Of Pages: * Publication Date: 1998 * ISBN / ASIN: 1564240428 http://rapidshare.com/files/57841868...ISC__1990_.pdf

Engineered Concrete Mix Design and Test Methods (Concrete Technology Series) By Irving Kett Publisher: CRC Number Of Pages: 248 Publication Date: 1999-11-29 ISBN / ASIN: 0849322774 The Romans used an early type of concrete made with natural pozzuolanic cement more than 2,000 years ago. Today, Portland Cement Concrete is the most important material of construction. Yet few books, if any, exist that offer an in-depth analysis of the mixing and testing methods of this vital hydraulic cement. Until now that is. Engineered Concrete: Mix Design and Test Methods helps engineers, as well as laboratory technicians, grasp a better understanding of Portland Cement and Portland Cement Concrete

http://mihd.net/si6vqn

Estimating Building Costs (Civil and Environmental Engineering) By * Publisher: CRC * Number Of Pages: 768 * Publication Date: 2003-04-22 * ISBN / ASIN: 0824740866 $129.95 Book Description: Companies live or die on the basis of estimating their costs. Preparing estimates and bidding for new jobs is a complex and often costly process. There is no substitute for on the job training -until now. Drawing on the authors' combined experience of more than 70 years, Estimating Building Costs presents state-of-the-art principles, practices, and techniques for assessing these expenditures that can be applied regardless of changes in the costs of materials, equipment, and labor. The book is an efficient and practical tool for developing contracts or controlling project costs. The authors cover the major components of the direct cost: estimating procedures and cost trends related to materials, construction equipment, and skilled and unskilled labor. They describe various types of building estimates encountered during the lifecycle of a project, as well as the role and accuracy of each. The book provides an overview of the industry, cost indexes in use, approaches to preparing a detailed estimate, and an indepth description of the organization and function of the estimating group. Including CSI Master Format and UniFormat codes, estimating forms, a list of available estimating software packages, a detailed construction site and investigation report, the book provides a cost estimating methodology that readers can tailor to their own organizational needs http://mihd.net/xls1ia

Structural Steel Connection Structural Steel Connection by Perry S. Green,Thomas Sputo & Patrick Veltri Connection Teaching Toolkit.A Teaching Guide for Structural Steel Connections http://rapidshare.com/files/51366015...ed_on_AISC.pdf

Nonlinear Mechanics of Reinforced Concrete By K. Maekawa * Publisher: Taylor & Francis * Number Of Pages: * Publication Date: 2003-05-16 * ISBN / ASIN: 0415271266 $155.10 Book Description: This book describes the application of nonlinear static and dynamic analysis for the design, maintenance and seismic strengthening of reinforced concrete structures. The latest structural and RC constitutive modeling techniques are described in detail, with particular attention given to multi-dimensional cracking and damage assessment, and their practical applications for performance-based design. Other subjects covered include 2D/3D analysis techniques, bond and tension stiffness, shear transfer, compression and confinement. Nonlinear Mechanics of Reinforced Concrete presents a practical methodology for structural engineers, graduate students and researchers concerned with the design and maintenance of concrete structures rar file password : AlhandasaNetSameerCo

44 MB http://www.4shared.com/file/19773068...Mechanics.html

Manual for the design of plain masonry in building structures By * Publisher: SETO * Number Of Pages: 77 * Publication Date: 1997 * ISBN / ASIN: 1874266344 http://rapidshare.com/files/51335915..._Structure.pdf

STEEL DESIGN GUIDE-Modification of Exsiting Welded Steel moment Frame http://rapidshare.com/files/50470478...smic_Resistanc

Specification for structural steel building 2005 http://rapidshare.com/files/50123611...lding_2005.pdf

Handbook of Structural Steelwork By * Publisher: Steel Construction Institute,The * ISBN / ASIN: 1859421334 http://rs164.rapidshare.com/files/50..._SteelWork.pdf

Structural Steelwork Connections Author: Graham W. Owens Brian D. Cheal Publisher: Butterworth-Heinemann Publication Date: 1989-08 Number Of Pages: 336 ISBN: 0408012145 Structural Steelwork Connections by Graham W Owens & Brian D cheal ISBN: 0408012145 A nicely written book for beginners as well as experienced designers. The clear theoretical explanations combined with practical tutorials make this book stand among other books on the same subject. Even though it uses BS codes for the tutorials, still it gives extensive insight to the

problems, which can be applied to any codes, for example, prying analysis of bolts. When it comes to fatigue design, the author doesn't cover much. That may be a small demerit of this book, but if any body looks for static design with respect to BS codes, this book will fulfill the expectation. This book intends to provide guidance on connection design combining scientific principles with practical application http://www.bestsharing.com/files/ms0...tions.pdf.html

Steel Designers' Manual By Steel Construction Institute Staff * Publisher: Blackwell Publishing Limited * Number Of Pages: 1368 * Publication Date: 2005-05-01 * ISBN / ASIN: 1405134127 $75.82 Book Description: This classic manual on structural steel design provides a major source of reference for structural engineers and fabricators working with the leading construction material. Based fully on the concepts of limit state design, the manual has been revised to take account of the 2000 revisions to BS 5950. It also looks at new developments in structural steel, environmental issues and outlines the main requirements of the Eurocode on structural steel Rar'd 1,370 page, OCR-quality, pdf PDF File-Size: 11 MB http://rapidshare.com/files/50337813/R20070821F.rar or http://rapidshare.com/files/50255948/steel_designer_s_maunal.pdf mirror : http://w13.easy-share.com/1119831.html pass : ownthenet.net.tc

Code of Practice for the Structural use of Steel-2005 The Government of the Hong Kong Special Administrative Region First published: August 2005 Prepared by: Buildings Department 12/F-18/F Pioneer Centre, 750 Nathan Road, Mongkok, Kowloon, Hong Kong Consultant: Joint Venture Consultancy from The Hong Kong Polytechnic University and Ove Arup & Partners Hong Kong Limited directed by Ir Professor S.L. Chan, Ir K.K. Kwan, Ir Professor K.F. Chung and Ir Dr. D.G. Vesey The code contains clauses on materials and workmanship for fabrication and erection.

excerpt: FOREWORD Codes and regulations for the design of steel structures in Hong Kong were initially derived from the London Byelaws and then BS 449. In 1987 Hong Kong published its own code based on the permissible stress design for the use of structural steel. In recognition of the stated aim of The Government of The Hong Kong Special Administrative Region to develop a technology driven and knowledge based society, the Hong Kong Buildings Department commissioned a Consultancy Study to carry out reviews of structural steel design practice in Hong Kong and overseas and to draft a new limit state code for the Structural Use of Steel using Limit State Approach. The study was carried out by a joint venture consultancy formed from The Hong Kong Polytechnic University and Ove Arup & Partners Hong Kong Limited. The code is intended to encourage the use of structural steel to the benefit of stakeholders, the environment and the society. It offers the potential of wider use in the region. The code has been developed using worldwide best practice and philosophy from international codes. Particular guidance has been introduced to the Code to cover high rise building design, composite design, long span structures, stability issues, temporary works in construction, a wide range of steel grades, performance based design and structural vibration. The code is intended to be easy for use by practicing engineers. Use of materials is covered by reference to internationally accepted equivalent standards and by clarifying procedures for demonstrating compliance of materials which fall outside these standards. The Code contains clauses on materials and workmanship for fabrication and erection. This Code of Practice provides full guidance on how the requirements of the Buildings Ordinance may be complied with http://rapidshare.com/files/50307730...e_of_Steel.pdf

Specification for Structural Steel Buildings, 2005-03, 2nd Printing: 2006-07 ANSI/AISC 360-05 An American National Standard American Institute of Steel Construction, Inc. 519 pages Supersedes the Load and Resistance Factor Design Specification for Structural Steel Buildings dated December 27, 1999, the Specification for Structural Steel Buldings— Allowable Stress Design and Plastic Design dated June 1, 1989, including Supplement No. 1, the Specification for Allowable Stress Design of Single-Angle Members dated June 1, 1989, the Load and Resistance Factor Design Specification for SingleAngle Members dated November 10, 2000, and the Load and Resistance Factor Design Specification for the Design of Steel Hollow Structural Sections dated November 10, 2000, and all previous versions of these specifications. Approved by the AISC Committee on Specifications and issued by the AISC Board of Directors Rar'd 519 page, OCR-quality, pdf PDF File-Size: 7.2 MB http://rapidshare.com/files/50340045/R20070821G.rar or http://rapidshare.com/files/50123611...lding_2005.pdf

Structural Details in Concrete Author: M. Y. H. Bangash Publisher: Blackwell Science Inc Publication Date: 1992-08 Number Of Pages: 260 http://savefile.com/projects3.php?fid=3171534&pid=298393&key=725772 or http://rapidshare.de/files/22577434/Bangash_-_Structural_Details_In_Concrete__Blackwell_Scienti fic_1992_.pdf

http://depositfiles.com/en/files/539381

ISBN: 0071364730 Title: Standard Handbook for Civil Engineers (Handbook) Author: Jonathan T. Ricketts M. Kent Loftin Frederick S. Merritt Publisher: McGraw-Hill Professional Publication Date: 2003-12-29 Number Of Pages: 1600 IF CIVIL ENGINEERS COULD HAVE ONLY ONE REFERENCE BOOK – THIS WOULD BE IT

Here is THE definitive reference in civil engineering. Within the pages of this classic you'll find fingertip access to everything from the fundamentals of civil engineering to the latest changes in design, construction, materials, and equipment in 23 different disciplines including Systems Design, Geotechnical Engineering, and Community and Regional Planning. This new, completely updated, and expanded Fifth Edition features: * The most recent code changes, including AIC, AISC, ASTM, NDS for Wood Structures, and more * Current EPA and OSHA regulations * Additional information on design build delivery systems * Increased coverage of stormwater runoff * Over 700 tables, formulas, and drawings to make every explanation and procedure crystal clear * Sections on construction management; materials specifications; structural theory; wood and concrete, steel design and construction; and much more * The latest design methods for buildings, airports, highways, tunnels, and bridges Turn to this one-stop review of the field for simplified solutions to the hundreds of practical problems you face in your day-to-day civil engineering practice

Contributors Preface About the Editors Sect. 1 Systems Design Sect. 2 Design Management Sect. 3 Specifications Sect. 4 Construction Management Sect. 5 Construction Materials Sect. 6 Structural Theory Sect. 7 Geotechnical Engineering Sect. 8 Concrete Design and Construction Sect. 9 Structural Steel Design and Construction Sect. 10 Cold-Formed-Steel Design and Construction Sect. 11 Wood Design and Construction Sect. 12 Surveying Sect. 13 Earthwork Sect. 14 Community and Regional Planning Sect. 15 Building Engineering Sect. 16 Highway Engineering Sect. 17 Bridge Engineering Sect. 18 Airport Engineering Sect. 19 Rail-Transportation Engineering Sect. 20 Tunnel Engineering Sect. 21 Water Resources Engineering Sect. 22 Environmental Engineering Sect. 23 Coastal and Port Engineering App Factors for Conversion to the Metric System (SI) of Units Index

___________________________ http://mihd.net/03cv2p

Structural Analysis (5th Edition) By Russell C. Hibbeler, Russell C Hibbeler, * Publisher: Prentice Hall * Number Of Pages: 600 * Publication Date: 2001-12-13 * ISBN / ASIN: 0130418250 Book Description: This book provides students with a clear and thorough presentation of the theory and application of structural analysis as it applies to trusses, beams, and frames. Emphases are placed on teaching readers to both model and analyze a structure. A hallmark of the book, Procedures for Analysis, has been retained in this edition to provide learners with a logical, orderly method to follow when applying theory. Chapter topics include types of structures and loads, analysis of statically determinate structures, analysis of statically determinate trusses, internal loadings developed in structural members, cables and arches, influence lines for statically determinate structures, approximate analysis of statically indeterminate structures, deflections, analysis of statically indeterminate structures by the force method, displacement method of analysis: slope-deflection equations, displacement method of analysis: moment distribution, analysis of beams and frames consisting of nonprismatic members, truss analysis using the stiffness method, beam analysis using the stiffness method, and plane frame analysis using the stiffness method. For individuals planning for a career as structural engineers

http://rapidshare.com/files/10105884...YSIS.part1.rar http://rapidshare.com/files/10135191...YSIS.part2.rar

Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings SAC Joint Venture A partnership of Structural Engineers Association of California (SEAOC) By California Universities for Research in Earthquake Engineering (CUREe) Prepared for SAC Joint Venture Partnership by Guidelines Development Committee Number Of Pages: 73 * Publication Date: June 2000 * Binding: PDF 1.1 Purpose This report, FEMA-350 – Recommended Seismic Design Criteria for New Steel MomentFrame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes

Rar'd 73 page PDF (no protection: can be printed, copied, etc)

File-Size: 1.19 MB http://rapidshare.com/files/49462991/R20070815Y.rar

DYNAMICS OF STRUCTURES” (2nd Edition) by Ray Clough and Joseph Penzien A CSI PUBLICATION Berkeley, CA, February 26, 2004 – Computers and Structures, Inc., is pleased to release the latest revision to Dynamics of Structures, 2nd Edition by Professors Clough and Penzien. A classic, this definitive textbook has been popular with educators worldwide for nearly 30 years. This release has been updated by the original authors to reflect the latest approaches and techniques in the field of structural dynamics for civil engineers. During the past 50 years, Drs. Ray Clough and Joseph Penzien have earned pre-eminence in the engineering community, dedicating their academic lives to improving the understanding of how structures behave when subjected to nature's forces. This 700-page book represents the culmination of that work. It introduces topics suitable for advanced undergraduate students and progresses through more advanced topics, such as non-deterministic analysis of earthquake response, appropriate for the graduate student and practicing engineer. This book belongs on every engineer’s shelf. Historically, few books in structural engineering have had as much influence on expanding the knowledge base in structural engineering. With this revision, the book remains an extraordinary tool for those teaching structural dynamics and a timely reference for those in professional practice. Volume and educational pricing are available through Computers and Structures, Inc. ABOUT COMPUTERS AND STRUCTURES, INC. Founded in 1975, CSI is recognized worldwide as an innovative leader in the development of software tools for the analysis and design of civil structures. The products of CSI, including SAP2000, ETABS, SAFE, CSiCOL and CSIDetailer, are licensed to thousands of engineering firms in more than 150

countries. http://www.csiberkeley.com/dynamics.html

http://rapidshare.com/files/49268492...ph_Penzien.pdf

Reinforced concrete design theory & examples

Book Description The third edition of this popular textbook has been extensively rewritten and expanded to conform to the latest versions of BS8110 and EC2. It sets out design theory for concrete elements and structures, and illustrates practical applications of the theory. Reinforced Concrete includes more than 60 clearly worked out design examples and over 600 diagrams, plans and charts. Background to the British Standard and Eurocode are given to explain the "why" as well as the "how," and differences between the codes are highlighted. New chapters on prestressed concrete and water retaining structures are included in this edition, and the most commonly encountered design problems in structural concrete are covered. Additional worked examples are available on an associated website at www.sponpress.com/civeng/support.htm. This book is written for students on civil engineering degree courses, to explain the principles of element design and the procedures for design of concrete buildings, and is also a useful reference for practicing engineers.

http://mihd.net/nmyet4

Tall Building Structures: Analysis and Design By Bryan Stafford Smith, Alex Coull, * Publisher: Wiley-Interscience * Number Of Pages: 537 * Publication Date: 1991-01-01 * ISBN / ASIN: 0471512370 $178.02 Book Description: Examines structural aspects of high rise buildings, particularly fundamental approaches to the analysis of the behavior of different forms of building structures including frame, shear wall, tubular, core and outrigger-braced systems. Introductory chapters discuss the forces to which the structure is subjected, design criteria which are of the greatest relevance to tall buildings, and various structural forms which have developed over the years since the first skyscrapers were built at the turn of the century. A major chapter is devoted to the modeling of real structures for both preliminary and final analyses. Considerable attention is devoted to the assessment of the stability of the structure, and the significance of creep and shrinkage is discussed. A final chapter is devoted to the dynamic response of structures subjected to wind and earthquake forces. Includes both accurate computer-based and approximate methods of analysis 35M pass : ownthenet.net.tc

http://w13.easy-share.com/1122494.html http://w13.easy-share.com/1122880.html http://w13.easy-share.com/1122881.html http://w13.easy-share.com/1122882.html

Book Description: Solutions-based approach to quick calculations in structural element design and analysis Now updated with 30% new material, Roark Formulas for Stress and Strain, Seventh Edition, is the ultimate resource for designers, engineers, and analysts who need to calculate loads and stress. This landmark reference from Warren Young and Richard Budynas provides you with equations and diagrams of structural properties in an easy-to-use, thumb-through format. Updated, with a user-friendly page layout, this new edition includes expanded coverage of joints, bearing and shear stress, experimental stress analysis, and stress concentrations, as well as material behavior coverage and stress and strain measurement. You’ll also find expanded tables and cases; improved notations and figures in the tables; consistent table and equation numbering; and verification of correction factors. Publisher: McGraw-Hill Professional Number Of Pages: 832 Publication Date: 2001-09-13 Sales Rank: 9739 ISBN / ASIN: 007072542X EAN: 9780070725423 Binding: Hardcover Manufacturer: McGraw-Hill Professional Studio: McGraw-Hill Professional Roark's Formulas For Stress And Strain PDF 6.7 Mb rapidshare.com

zupload.com or Size: 6.48 MB MD5: a0027212d99d394c51bc7c521a7a3dd3 mihd.net

Civil Engineering Hydraulics: Essential Theory With Worked Examples By R. E. Featherstone, C. Nalluri, * Publisher: Blackwell Science * Number Of Pages: 399 * Publication Date: 1995-03 * ISBN / ASIN: 0632038632 This well established text provides a succinct introduction to the theory of civil engineering hydraulics, together with a large number of worked examples and exercise problems with answers, to help readers assess their understanding of the theory and methods of analysis and design. The Fourth Edition features a new chapter on hydraulic structures and an expanded section on the gradient method for pipe networks design. Additional problems and worked examples have been added. Civil Engineering Hydraulics will be invaluable throughout a student's entire course, and will also be welcomed by practicing engineers as a concise reference. 1. Properties of Fluids 2. Fluid Statics 3. Fluid Flow Concepts and Measurements 4. Flow of Incompressible Fluids in Pipelines 5. Pipe Network Analysis 6. Pump-pipeline System Analysis and Design 7. Boundary Layers on Flat Plates and in Ducts 8. Steady Flow in Open Channels 9. Dimensional Analysis, Similitude and Hydraulic Models 10. Ideal Fluid Flow and Curvilinear Flow 11. Gradually Varied Unsteady Flow from Reservoirs 12. Mass Oscillations and Pressure Transients in Pipelines 13. Unsteady Flow in Channels

14. Uniform Flow in Loose Boundary Channels 15. Hydraulic Structures

http://mihd.net/bi3h5f http://rapidshare.com/files/14270135...rd_edition.rar

SBN: 0750603135 Structural Elements Design Manual Author: TREVOR DRAYCOTT Publisher: Laxton's Publication Date: 1990-06-11 Number Of Pages: 248 Gives clear explanations of the logical design sequence for structural elements. The Structural Engineer says: `The book explains, in simple terms, and with many examples, Code of Practice methods for sizing structural sections in timber, concrete,masonry and steel. It is the combination into one book of section sizing methods in each of these materials that makes this text so useful....Students will find this an essential support text to the Codes of Practice in their study of element sizing'

size: 7.66 MB http://rapidshare.com/files/1541050/...mann_1990_.pdf

Wind Loading of Structures By J.d. Holmes * Publisher: Taylor & Francis * Number Of Pages: 336 * Publication Date: 2001-07-01 * ISBN / ASIN: 041924610X Book Description: Provides a comprehensive, practical examination of the wind loading of structures. Fundamentals of wind loading are described in detail, with the author discussing the nature of wind, prediction of wind speed and force, dynamic response of buildings, and successful design

of buildings to counteract wind loading problems. The application of wind loading in a variety of different types of structures, including low-rise and tall buildings, towers and masts, stadiums and bridges is discussed http://mihd.net/povwfh http://rapidshare.com/files/32592968...041924610X.rar

Residential Structural Design Guide: 2000 Edition This guide strives to bridge the gap between conventional engineering practices and conventional residential construction practices. February 2000 Preface Structural Design Guide is a unique and comprehensive tool for design professionals, particularly structural engineers, seeking to provide value-added services to the producers and consumers of American housing. As such, the guide is organized around the following major objectives: * to present a sound perspective on American housing relative to its history, construction characteristics, regulation, and performance experience; * to provide the latest technical knowledge and engineering approaches for the design of homes

to complement current code-prescribed design methods; * to assemble relevant design data and methods in a single, comprehensive format that is instructional and simple to apply for the complete design of a home; and * to reveal areas where gaps in existing research, design specifications, and analytic tools necessitate alternative methods of design and sound engineering judgment to produce efficient designs. This guide consists of seven chapters. The layout and application of the various chapters are illustrated in the figure on page vii. Chapter 1 describes the basic substance of American housing, including conventional construction practices, alternative materials, building codes and standards, the role of design professionals, and actual experience with respect to performance problems and successes, particularly as related to natural hazards such as hurricanes and earthquakes. Chapter 2 introduces basic engineering concepts regarding safety, load path, and the structural system response of residential buildings, subassemblies, and components to various types of loads. Chapter 3 addresses design loads applicable to residential construction. Chapters 4 and 5 provide step-by-step design procedures for the various components and assemblies comprising the structure of a home—from the foundation to the roof. Chapter 6 is devoted to the design of light-frame homes to resist lateral loads from wind and earthquakes. Chapter 7 addresses the design of various types of connections in a wood-framed home that are important to the overall function of the numerous component parts. As appropriate, the guide offers additional resources and references on the topics addressed http://www.huduser.org/Publications/pdf/residential.pdf or http://rapidshare.com/files/26404412...esignguide.pdf

Building Code Requirements for Structural Concrete and Commentary (ACI 318M-05) By multiple authors * Publisher: American Concrete Institute * Number Of Pages: * Publication Date: 2005 * ISBN / ASIN: B000L3MBKI http://mihd.net/edomrk http://rapidshare.com/files/41821406...ci_318m-05.pdf

Aluminum Structures: A Guide to Their Specifications and Design By J. Randolph Kissell, Robert L. Ferry, * Publisher: Wiley * Number Of Pages: 544 * Publication Date: 2002-05-23 * ISBN / ASIN: 0471019658 $127.75 Book Description: On the First Edition: "The book is a success in providing a comprehensive introduction to the use of aluminum structures . . . contains lots of useful information." —Materials & Manufacturing Processes "A must for the aluminum engineer. The authors are to be commended for their painstaking work." —Light Metal Age

Technical guidance and inspiration for designing aluminum structures Aluminum Structures, Second Edition demonstrates how strong, lightweight, corrosion-resistant aluminum opens up a whole new world of design possibilities for engineering and architecture professionals. Keyed to the revised Specification for Aluminum Structures of the 2000 edition of the Aluminum Design Manual, it provides quick look-up tables for design calculations; examples of recently built aluminum structures-from buildings to bridges; and a comparison of aluminum to other structural materials, particularly steel. Topics covered include: * Structural properties of aluminum alloys * Aluminum structural design for beams, columns, and tension members * Extruding and other fabrication techniques * Welding and mechanical connections * Aluminum structural systems, including space frames, composite members, and plate structures * Inspection and testing * Load and resistance factor design * Recent developments in aluminum structures File type: PDF Size: 8852 KB http://mihd.net/bpzfo5

Dynamics of Offshore Structures By * Publisher: Wiley * Number Of Pages: 344 * Publication Date: 2002-10-09 * ISBN / ASIN: 0471264679 $157 Book Description: Unique, cutting-edge material on structural dynamics and natural forces for offshore structures Using the latest advances in theory and practice, Dynamics of Offshore Structures, Second Edition is extensively revised to cover all aspects of the physical forces, structural modeling, and mathematical methods necessary to effectively analyze the dynamic behavior of offshore structures. Both closed-form solutions and the Mathematica(r) software package are used in many of the up-to-date example problems to compute the deterministic and stochastic structural responses for such offshore structures as buoys; moored ships; and fixed-bottom, cable-stayed, and gravity-type platforms. Throughout the book, consideration is given to the many assumptions involved in formulating a structural model and to the natural forces encountered in the offshore environment. These analyses focus on plane motions of elastic structures with linear and nonlinear restraints, as well as motions induced by the forces of currents, winds, earthquakes, and waves, including the latest theories and information on wave mechanics. Topics addressed include multidegree of freedom linear structures, continuous system analysis (including the motion of cables and pipelines), submerged pile design, structural modal damping, fluid-structure-soil interactions, and single degree of freedom structural models that, together with plane wave loading theories, lead to deterministic or time history predictions of structural responses. These analyses are extended to statistical descriptions of both wave loading and structural motion. Dynamics of Offshore Structures, Second Edition is a valuable text for students in civil and mechanical engineering programs and an indispensable resource for structural, geotechnical, and construction engineers working with offshore projects

Filetype: PDF

Size: 28.265 MB Mihd

ISBN: 0471538493 Title: Peterson's Stress Concentration Factors, 2nd Edition Author: Walter D. Pilkey Publisher: Wiley-Interscience Publication Date: 1997-04-18 Number Of Pages: 544 A complete revision of the definitive work on the subject of stress concentration. This new edition updates all of the graphics with computer-generated art which incorporates both a visual representation of the product/structure under consideration along with the graph of the stress concentration factors. Contains extensive material on how to perform computer analyses for stress concentrations and how to design to reduce them. A "quick-finder" feature has been provided for locating frequently used charts

http://rapidshare.com/files/3748894/stressfactors.rar

Password: www.AvaxHome.ru

Excavations and Foundations in Soft Soils By Hans-Georg Kempfert, Berhane Gebreselassie, * Publisher: Springer * Number Of Pages: 576 * Publication Date: 2006-05-05 * ISBN / ASIN: 3540328947 Book Description: The book reviews the experiences with, as well as recent developments and research results on excavations and foundations in and on soft soil deposits. Geotechnical design and execution of civil engineering structures on very soft soils are usually associated with substantial difficulties. The aim of the authors is to give the readers an overview of the state of the art of material properties of soft soils and their application in excavations, different types of foundations and stabilization methods. The authors emphasize, however, that an underground with soft soil layer should not a priori be classified as extremely difficult and highly cost intensive. By making use of advance knowledge in soft soil engineering so far as available in the field of geotechnical engineering, it is possible to attain a technically safe and economically justifiable solution for a particular construction project. The book is expected to contribute much in this regard. The book is intended to serve practising as well as research engineers in the field of geotechnical engineering, moreover civil and structural engineers and advanced students may also find it a useful reference work

Mihd 15.96 MB Rapidshare

Geotechnical Engineering Investigation Handbook, Second Edition By Roy E. Hunt * Publisher: CRC * Number Of Pages: 1088 * Publication Date: 2005-04-12 * ISBN / ASIN: 0849321824 Book Description: This updated second edition is a comprehensive guide to collecting samples, performing laboratory analysis or in situ characterization, and formulating design criteria based on the results of the analysis. The author relies on his 40 years of professional experience, emphasizing identification and description of the elements of the geologic environment, the data required for analysis and design of the engineering works, the physical and engineering properties of geologic materials, and procuring the data. By using a practical approach to problem solving, the book helps engineers consider geological phenomena in terms of the degree of their hazard and the potential risk of their occurrence

size: 9.54+9.54+9.54+9.54+6.61 mb http://mihd.net/xgwsnr http://mihd.net/jmqvhy http://mihd.net/5942fd http://mihd.net/5cftlw http://mihd.net/ht1xa0 or http://rapidshare.com/files/7892238/...ook__part1.rar http://rapidshare.com/files/7894364/...ook__part2.rar http://rapidshare.com/files/7895433/...ook__part3.rar http://rapidshare.com/files/7896007/...ook__part4.rar http://rapidshare.com/files/7892862/...ook__part5.rar

AISC Manual of Steel Construction: Load and Resistance Factor Design, Third Edition (LRFD 3rd Edition) By AISC Manual Committee * Publisher: American Institute of Steel Construction * Publication Date: 2001-11-01 * ISBN / ASIN: 1564240517

1.8MB ~ PDF Mihd Rapidshare

The Work Breakdown Structure in Government Contracting By Gregory T. Haugan * Publisher: Management Concepts * Number Of Pages: 144 * Publication Date: 2003-01-01 * ISBN / ASIN: 1567261205 Book Description: This new practical handbook teaches you how to employ the work breakdown structure (WBS) in government contracting to ensure that your contracts stay on track, on budget, and meet your objectives. Whether you're a government employee involved in contract management or a contractor supporting a government project, this hands-on guide shows you how to use the WBS for better project results - from initiation to closeout. An Invaluable Tool for Meeting New OMB A-11 Requirements NOW is the time for you to learn to use the WBS in your RFPs, SOWs, and proposals. In 2002 OMB began requiring that all government agencies and contractors use the ANSI/EIA standard as the basis for project management and reporting. What's more, in 2004 OMB will require that all budget proposals submitted for major acquisitions and IT systems or projects include a project management plan based on the ANSI standard for EVM. The Work Breakdown Structure in Government Contracting will help both government personnel and contractors develop plans with a WBS that meets and exceeds OMB's requirements

Mihd

Structural Steelwork Connections Structural Steelwork Connections By Graham W. Owens, Brian D. Cheal, * Publisher: Butterworth-Heinemann * Number Of Pages: 336 * Publication Date: 1989-08 * ISBN / ASIN: 0408012145 An efficient tool to design Bolts and welds Structural Steelwork Connections by Graham W Owens & Brian D cheal ISBN: 0408012145 A nicely written book for beginners as well as experienced designers. The clear theoretical explanations combined with practical tutorials make this book stand among other books on the same subject. Even though it uses BS codes for the tutorials, still it gives extensive insight to the problems, which can be applied to any codes, for example, prying analysis of bolts. When it comes to fatigue design, the author doesn't cover much. That may be a small demerit of this book, but if any body looks for static design with respect to BS codes, this book will fulfill the expectation.

http://www.bestsharing.com/files/ms0...tions.pdf.html or http://www.4shared.com/file/16949494...nnections.html

Earthquake Engineering Handbook (New Directions in Civil Engineering) By * Publisher: CRC * Number Of Pages: 1512 * Publication Date: 2002-09-27 * ISBN / ASIN: 0849300681 Book Description: Written for practitioners as well as graduate- level students, this is a comprehensive reference and resource that covers the spectrum of disciplines and topics needed to design for and mitigate earthquakes. International experts provide the essential elements of each subject, from the fundamental, geoscience, and structural aspects to the social and economic impact of earthquakes. Covering both the traditional as well as new and innovative aspects of earthquake engineering, this handbook emphasizes professional applications and offers ready-to-use materials, including many formulas and tables that give immediate answers to real problems

rapidshare.com mihd.net

Uniform Building Code 1997: Structural Engineering Design Provisions (Uniform Building Code Vol 2: Structural Engineering Design Provisions) By International Code Council Publisher: Prentice Hall Number Of Pages: 574 Publication Date: 1997-04 ISBN / ASIN: 1884590896 Excellent Resource Book For anybody in the construction, engineering, design, or code enforcement/verification fields this book is a must. It is an excellent reference & resource book with tons of valuable information http://www.esnips.com/doc/f2383643-0...Volume-2(1997)

ISBN: 0216931770 ISBN-13: 9780216931770 Format: Hardcover, 256pp Publisher: Taylor & Francis, Inc The whole area of durability, integrity and quality control of structures is starting to be taken very seriously by the construction industry. Central to this is the design life concept, which looks at the materials used, methods of construction, safety factors, maintenance and repair, and change of use, all from a holistic viewpoint. This new book is based on a recent symposium, where leading experts met to discuss this issue and formulate a strategy. In addition, experts from other industries (e.g. aerospace, nuclear), where the design life concept is well established, provided invaluable insights into the problems and benefits of implementing this approach. In total, thirty short contributions are presented in this book, which represents the present state of the art in this field. These are logically structured into five sections, and at the end of each section there is an additional contribution summarising the dialogue or discussion at the symposium - a way of presenting instant feedback to the ideas presented in the contributions

http://mihd.net/3uzivp or http://rapidshare.com/files/11922744...Structures.pdf

Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure. This text provides the student with a comprehensive introduction to all types of structural and stress analysis. Starting from an explanation of the basic principles of statics, normal and shear force and bending moments and torsion. It goes on to examine the different structures in which consideration of these is paramount, from simple pin joints to suspension cables. The properties of materials are outlined and all aspects of beam theory are examined in full. Finally the author discusses the key area of instability in structures

http://www.4shared.com/file/8636073/...1996__4AH.html or http://rapidshare.de/files/22999328/..._1996__4AH.rar

http://rapidshare.com/files/5216091/..._1996__4AH.rar

Structural Grouts By P. Domone Publisher: Routledge Number Of Pages: 222 Publication Date: 1993-11-01 ISBN / ASIN: 0751400971 This book considers the properties of grouts, and how they may be formulated for different purposes, and application areas where the advantages of grouts have been assessed and ratified. Case studies illustrate benefits, problems and future potential. The book gathers together a substantial amount of information on grout properties, utilisation and practice which has hitherto been available in only fragmented or restricted form http://mihd.net/1qzmt3 or http://www.censoft.net/Detail.asp?cenID=607 or http://www.savefile.com/files/191105

This book sets out the basic principles of composite construction with reference to beams, slabs, columns and frames, and their applications to building structures. It deals with the problems likely to arise in the design of composite members in buildings, and relates basic theory to the design approach of Eurocodes 2, 3 and 4 and BS 5950. The new edition, the first since 1975 has been substantially revised to take account of the new codes Composite Structures of Steel and Concrete: Beams, Slabs, Columns and Frames for Building By R. P. Johnson Publisher: Blackwell Publishing, Incorporated Number Of Pages: 224 Publication Date: 1994-07-01 ISBN / ASIN: 0632025077 http://www.savefile.com/download/195...a651cce69330f4 or http://mihd.net/2uz57g or http://file2upload.com/file/6876/com...25077.rar.html

or http://rapidshare.com/files/11340842...0632025077.rar

Principles of Structural Design By * Publisher: CRC * Number Of Pages: 528 * Publication Date: 2005-10-31 * ISBN / ASIN: 0849372356 Many important advances in designing high-performance structures have occurred over the last several years. Structural engineers need an authoritative source of information that thoroughly and concisely covers the foundational principles of the field. Comprising chapters selected from the second edition of the best-selling Handbook of Structural Engineering, this book provides a tightly focused, economical guide to the theoretical, practical, and computational aspects of structural design. Expert contributors discuss a wide variety of structures, including steel, aluminum, timber, and prestressed concrete, as well as reliability-based design and structures based on wind engineering

mihd.net rapidshare.com

Exact Solutions for Buckling of Structural Members (CRC Series in Computational Mechanics and Applied Analysis) By C.M. Wang, C.Y. Wang, J.N. Reddy, * Publisher: CRC * Number Of Pages: 207 * Publication Date: 2004-06-15 * ISBN / ASIN: 0849322227 The study of buckling loads, which often hinges on numerical methods, is key in designing structural elements. But the need for analytical solutions in addition to numerical methods is what drove the creation of Exact Solutions for Buckling of Structural Members. It allows readers to assess the reliability and accuracy of solutions obtained by numerical methods. The author has attempted to gather and present as many exact buckling solutions as possible in one single volume for engineers and researchers. These buckling solutions of columns, beams, arches, ring plates, and shells should serve as benchmarks for checking the validity, convergence, and accuracy of numerical methods and solutions. Catalog Copy

http://mihd.net/ig5c92

ISBN: 0632037245 Title: Reinforced Concrete: Analysis and Design Author: S. S. Ray Publisher: Blackwell Science Publication Date: 1994-11 Number Of Pages: 576 http://rapidshare.com/files/31017126/rcad.rar or http://mihd.net/dc4i2z or http://z30.zupload.com/download.php?...&filepath=2382

Precast Concrete: Materials, Manufacture, Properties and Usage By * Publisher: Chapman & Hall * Number Of Pages: 234 * Publication Date: 1990-12 * Sales Rank: 3056025 * ISBN / ASIN: 0853349940 This book provides a general treatise covering precast concrete as a whole. It gives a comprehensive account of materials, properties, manufacture and usage. Materials, processes, mix-designs, accelerated curing, performance, durablility and quality control, as well as repairs, are each discussed in their own right. Each section deals with a good practice approach and discusses at length the problems that can occur if such practice is not pursued. This book gives useful information to those who want to learn, teach, specify, manufacture, use or be associated with precast concrete in virtually every aspect. Coupled with this the author ventures a gaze into the future as to the way he sees the industry developing

rapidshare.com part 1 rapidshare.com part 2

Earthquake Protection By Andrew Coburn, Robin Spence Publisher: John Wiley & Sons Number Of Pages: 436 Publication Date: 2002-10-18 ISBN / ASIN: 0471496146 Since the publication of the successful first edition of Earthquake Protection there have been 110 lethal earthquakes, killing 130 000 people; there have also been significant developments in the field of earthquake risk management, particularly in the modelling and analysis of risk for insurance and financial services. Furthermore, major earthquake disasters, such as the 1994 Northridge earthquake in California, the 1995 Kobe earthquake in Japan and the 1999 Kocaeli earthquake in Turkey have occurred. The experience and knowledge gained through these events have improved our understanding of how to manage, mitigate and work towards the prevention of similar catastrophes. The 1990s were in fact the costliest decade on record in terms of disaster management due to such seismic events, placing unprecedented pressure on the insurance industry in particular, and changing its view of earthquake protection. Significantly revised and updated, this second edition continues to provide a comprehensive overview of

how to reduce the impact of earthquakes on people and property, and implement best practice in managing the consequences of such disasters. It also includes significant coverage of the techniques of modelling earthquake catastrophe. Each chapter deals with a separate aspect of protection, and covers a wide range of economic and social conditions, drawing on the authors' considerable personal experience and with reference to real life examples. Key features include: Recent event coverage Modern developments in the theory and practice of planning and engineering loss estimation techniques, along with new engineering techniques such as microzonation and hazard-mapping Historic buildings experience An entirely new chapter on 'Earthquakes and Finance' This valuable book provides essential reading for earthquake and structural engineers and geoscientists, as well as insurers and loss prevention specialists, risk managers and assessors involved in managing earthquake risk, urban and regional planners, and emergency management agencies

zupload.com

ISBN: 0419156208 Title: Durability of Concrete Structures Author: G. C. Mays Publisher: Taylor & Francis Publication Date: 1990-12-31 Number Of Pages: 320

This book is concerned with the long term durability of concrete as a structural material as used in the construction of buildings, bridges, roads, marine and civil engineering structures. It discusses the fundamental reasons for the deterioration of concrete over time and available techniques for detecting, remedying and preventing the deterioration http://mihd.net/jhfcdg or http://rapidshare.com/files/11927124...Protection.pdf

Eurocode 8 - Design of structures for earthquake resistance http://rapidshare.com/files/14461342/eurocode_8.rar

Reinforced concrete design theory http://up.9q9q.net/up/index.php?f=Bb9jihx1W

ISBN: 0849326745 Title: Handbook of Structural Engineering Author: Wai-Kai Chen Publisher: CRC Press Publication Date: 1997-10-24 Number Of Pages: 1600 Covering the broad spectrum of modern structural engineering topics, the Handbook of Structural Engineering is a complete, single-volume reference. It includes the theoretical, practical, and computing aspects of the field, providing practicing engineers, consultants, students, and other interested individuals with a reliable, easy-to-use source of information. Divided into three sections, the handbook covers

http://oscdn.com/files/269078/Handbo...eering.pdf.htm or http://rapidshare.de/files/20326475/...s_1999__v3.rar

Contributors Preface Introduction Pt. 1 Foundation and Civil Engineering Site Development Sect. 1A Water Behavior in Soils 1.3 Sect. 1B Site Preparation 1.23 Pt. 2 Soil Mechanics and Foundation Design Parameters Sect. 2A Soil Mechanics 2.3 Sect. 2B Shallow Foundations 2.65 Pt. 3 Fundamentals of Foundation Construction and Design Sect. 3 Concrete 3.3 Pt. 4 Reinforced Concrete Foundations Sect. 4A Fundamentals of Reinforced Concrete 4.3 Sect. 4B Foundation Design 4.53 Sect. 4C Pile Foundations 4.87 Pt. 5 Residential and Lightly Loaded Foundations: Design Parameters and Procedures Sect. 5 Design Parameters and Procedures 5.3 Pt. 6 Soil Improvement and Stabilization Sect. 6A Nongrouting Techniques 6.3 Sect. 6B Grouting to Improve Foundation Soil 6.341 Pt. 7 Foundation Failure and Repair: Residential and Light Commercial Buildings Sect. 7A Cause of Foundation Problems 7.3 Sect. 7B Foundation Repair Procedures 7.21 Sect. 7C Preventive Maintenance 7.149 Sect. 7D Foundation Inspection and Property Evaluation for the Residential Buyer 7.159 Sect. 7E References 7.179 Pt. 8 Foundation Failures and Repair: High-Rise and Heavy Construction Sect. 8 Foundation Failures and Repair: High Rise and Heavy Construction 8.3 Pt. 9 Miscellaneous Concerns Sect. 9A Forensic Engineering 9.3 Sect. 9B HUD 9.21 Sect. 9C Legal Aspects of Engineers and Lawyers Involved in Foundation Failure Analysis and Repair 9.45 Appendix - Conversion Tables A.1 Index I.1

mihd.net

ISBN: 0419202803 Title: Repair, Protection and Waterproofing of Concrete Structures Author: P. Perkins Publisher: Taylor & Francis Publication Date: 1997-07-01 Number Of Pages: 233 A wealth of recent research into the continued deterioration of reinforced concrete structures has led to a review of methods of investigation and repair techniques. This thoroughly revised and updated edition brings together the fundamental aspects of this world wide problem and offers advice on how investigations, diagnosis and consequent remedial work should be carried out _________________________ http://mihd.net/0mzqel or http://rapidshare.com/files/11933404...structures.pdf

ISBN: 0419202803 Title: Repair, Protection and Waterproofing of Concrete Structures Author: P. Perkins Publisher: Taylor & Francis Publication Date: 1997-07-01 Number Of Pages: 233 A wealth of recent research into the continued deterioration of reinforced concrete structures has led to a review of methods of investigation and repair techniques. This thoroughly revised and updated edition brings together the fundamental aspects of this world wide problem and offers advice on how investigations, diagnosis and consequent remedial work should be carried out _________________________ http://mihd.net/0mzqel or http://rapidshare.com/files/11933404...structures.pdf or http://www.file2upload.com/file/1001...02803-pdf.html

This one-of-a-kind reference evaluates the efficacy, stability, and strength of various soil walls, slopes, and structures enhanced by geosynthetic materials. Offering stimulating contributions from more than 50 leading specialists in the field, Reinforced Soil Engineering compiles recent innovations in design layout, controlled construction, and geosynthetic material implementation for improved cost-efficiency, maintenance, and functioning in civil engineering applications. The book focuses on geotechnical earthquake issues and case histories from countries including the United States, Canada, Japan, Taiwan, Turkey, and other European nations Text evaluates the efficacy, stability, and strength of various soil walls, slopes, and structures enhanced by geosynthetic materials. Compiles recent innovations in design layout, controlled construction, and geosynthetic material implementation for improved cost-efficiency, maintenance, and functioning in civil engineering

Preface

Contributors 1 Civil and Environmental Applications of Geosynthetics 1 2 Performance Properties of Geogrids 19 3 Unit Cell Testing of Reinforced Soils 37 4 Modeling the Time-Dependent Behavior of Geosynthetically Reinforced Soil Structures with Cohesive Backfill 69 5 Issue and Nonissue in Block Walls as Implied Through Computer-Aided Design 85 6 Application of Sliding Block Concept to Geosynthetic-Constructed Facilities 95 7 Failure of an 8-Meter-High Segmental Block Wall in the Northeast United States 113 8 Displacement Monitoring at Verrand High Reinforced Soil Structure 123 9 U.K. Case Study: Bluewater Retail and Leisure Destination Reinforced Soil Slopes to Form Steep-Sided New Lakes 137 10 State of the Practice: Past, Current, and Future Perspectives of Reinforced Soil Retaining Structures in Turkey 153 11 Recent Experiences of Reinforced Soil Retaining Structures in China 165 12 Large-Scale Reinforced Clay Walls Backfilled with Clay at Cheng Kung University 187 13 Geotextile Reinforced Abutments of Soft Foundation 221 14 Geosynthetic Reinforcement in the Mitigation of Pipeline Flotation 237 15 Practice and Research of Geosynthetic Reinforced Soil Walls in Australia 253 16 Geosynthetic Reinforced Containment Dike Constructed over Soft Foundation: Numerical Analysis 283 17 Post-Earthquake Investigation of Several Geosynthetic Reinforced Soil Retaining Walls and Slopes During Ji-Ji Earthquake of Taiwan 297 18 Model Tests of Seismic Stability of Several Types of Soil Retaining Walls 317 19 Performance of Geosynthetic Reinforced Soil Wall and Reinforced Earth Wall Subject to Blast Loading: Experimental and Numerical Study 359 20 Shaking Table Tests of Embankment Models Reinforced with Geotextiles 391 21 Centrifuge Modeling of Seismic Performance of Reinforced Earth Structures 417 22 Performance and Analysis of Arifiye Overpass Reinforced Earth Walls During the 1999 Kocaeli (Turkey) Earthquake 443 23 Dynamic Simulation of the Reinforced Slope Failure at Chi-Nan University During the 1999 Chi-Chi Earthquake 465 24 A Compact Probabilistic Representation of the Chi-Chi Earthquake Ground Motion 481 25 A Critical Review of Full-Scale Shaking Table Tests Conducted on Reinforced Soil Retaining Walls 491 Index 511

__________________________ http://mihd.net/mqu8rt or http://rapidshare.com/files/11281656...-_Hoe.rar.html

ISBN: 0079122477 Title: Foundation Analysis and Design Author: Joseph E. Bowles Publisher: McGraw-Hill Science/Engineering/Math Publication Date: 1995-09-01 Number Of Pages: 1024 The revision of this best-selling text for a junior/senior course in Foundation Analysis and Design now includes an IBM computer disk containing 16 compiled programs together with the data sets used to produce the output sheets, as well as new material on sloping ground, pile and pile group analysis, and procedures for an improved anlysis of lateral piles. Bearing capacity analysis has been substantially revised for footings with horizontal as well as vertical loads. Footing design for overturning now incorporates the use of the same uniform linear pressure concept used in ascertaining the bearing capacity. Increased emphasis is placed on geotextiles for retaining walls and soil nailing

Preface About the Computer Programs List of Primary Symbols Used in Text 1 Introduction 1 2 Geotechnical And Index Properties: Laboratory Testing; Settlement and Strength Correlations 15 3 Exploration, Sampling, and In Situ Soil Measurements 135 4 Bearing Capacity of Foundations 213 5 Foundation Settlements 284 6 Improving Site Soils for Foundation Use 344 7 Factors to Consider in Foundation Design 370 8 Spread Footing Design 403 9 Special Footings and Beams on Elastic Foundations 472 10 Mat Foundations 537 11 Lateral Earth Pressure 589 12 Mechanically Stabilized Earth and Concrete Retaining Walls 657 13 Sheet-Pile Walls: Cantilevered and Anchored 725 14 Walls for Excavations 785 15 Cellular Cofferdams 828 16 Single Piles - Static Capacity and Lateral Loads; Pile/Pole Buckling 867 17 Single Piles: Dynamic Analysis, Load Tests 968 18 Pile Foundations: Groups 1006 19 Drilled Piers or Caissons 1055 20 Design of Foundations for Vibration Controls 1090 Appendix A 1135 References 1144 Indexes 1165

__________________ http://mihd.net/x5nsib or http://rapidshare.com/files/9780506/...and_design.rar

http://mihd.net/c4382w or http://rapidshare.com/files/12126473/psism.rar

psaaword:arabsbook.com

http://mihd.net/4z7rmh or http://rapidshare.com/files/9854991/smiep.rar

Precast Concrete

http://www.megaupload.com/sa/?d=TU4K2MJ5

Concrete Materials By: M. Levitt size : 3.05Mo Format: Microsoft Reader Availability: Download Now The author condenses a lifetime of practical experience into this book that will provide a first point of reference whenever problems with materials occur on site. The subjects covered in this book are problems encountered with cements, aggregates, admixtures, ****llic and non-****llic reinforcement spacers. Design and workmanship aspects that affect site and precast works activities are discussed as well as the actions that occur, or should be occurring, within the management team. This book will be valuable for all professionals and trades people working with concrete, not only for novices, but also for experienced staff who may be encountering a problem for the first time http://mihd.net/p3f10v

SOIL ENGINEERING The book provides the practical meaning of the various aspects of soil mechanics, the use of unconfined compression test data, the meaning of consolidated tests, the practical value of lateral pressure, and more. In addition to the technical aspect of foundation investigation, in the real world the shadow of litigation looms over every consultant's head. The author covers these issues in detail

http://rapidshare.com/files/12824872/SOENGI.rar pass: tFSOENGI.rar

SOIL FORMATION [size=1]Soil Formation deals with qualitative and quantitative aspects of soil formation (or pedogenesis) and the underlying chemical, biological, and physical processes. The starting point of the text is the process - and not soil classification. Effects of weathering and new formation of minerals, mobilisation, transport, and breakdown or immobilisation of dissolved and suspended compounds are discussed. Soil processes and profiles are discussed in relation to the landscape, the geosphere, and the biosphere. Emphasis lies on the universality of soilforming processes in past and present, and on the soil as a dynamic entity that forms part of the total environment. Complexity of genetic processes in time and space is given much attention. The text gives many examples from literature and places some in a new light. The reader is guided through the subject matter by a large number of questions and problems to help understand and synthesis the material. Answers to all questions are included. This second edition has been updated to reflect recent discoveries. Printing errors have been corrected, and new photographs support the text. "Working through the questions and problems in this book would provide a rigorous training for any advanced pedology graduate student (and for many pedology professors as well)."(David J. Brown, Montana State University, Soil Science Vol. 169 No. 4) Book Info Deals with qualitative and quantitative aspects of soil formation fo the underlying chemical, biological, and physical processes. Soil processes and profiles are discussed in relation to the landscape, the geosphere, and biosphere http://www.oxyshare.com/get/11469201...eemen.rar.html

Concrete in the Marine Environment (Modern Concrete Technology Series) By P.K. Mehta * Publisher: Routledge * Number Of Pages: 224 * Publication Date: 1990-12-31 * ISBN / ASIN: 1851666222 $240.00 Book Description: This book reviews the marine environment, the composition and properties of concrete, history of concrete performance in seawater, causes of deterioration of concrete in the marine environment, selection of materials proportions for durable concrete, concrete practice and repair of marine structures Pdf, 12.54M http://mihd.net/7o0sdh

Unknown Binding 488 pages (January 30, 1998) Publisher: Butterworth-Heinemann Ltd Language: English

Mirror http://freeit.free.fr/Knovel/Concret...%20Techniques

Handbook of Analytical Techniques in Concrete

Published: 2001 Pages: 985 Figures: 420 Tables: 70 Scientific analysis techniques for a wide variety of concretes and their additives as well as concrete technologies, perfect for practitioners, students, and professional standards writers. Measuring the long-term durability of new types of concrete and concrete technologies is crucial to their acceptance in the marketplace. This long-needed handbook of analytical techniques provides a complete reference to the cutting-edge procedures used to test today's innovative materials. Ranging from chemical and thermal analysis, to IR and Nuclear Magnetic Resonance spectroscopy, to Scanning Electron Microscopy, x-ray diffraction, computer modeling and more, the book provides first-hand explanations of modern methods - contributed by 24 leading scientists, many of whom actually developed or refined the techniques. The book includes many analytic techniques, applied to a wide range of organic, inorganic and composite materials and additives. Perfect for practitioners, students, and professional standards writers, the handbook is highly useful for scrutinizing materials in a variety of environments. It takes into account the many factors that affect the qualities of concrete - temperature, pore and pore size distribution, surface area, and exposure - gathering diverse evaluation methods into one convenient resource.

http://rapidshare.com/files/2073797/...rete_muyac.rar or http://mihd.net/7.2002/Handbook_of_A...OREE_.zip.html

Forensic Structural Engineering Handbook By Robert Ratay * Publisher: McGraw-Hill Professional * Number Of Pages: 688 * Publication Date: 2000-02-01 * ISBN / ASIN: 0070526672 Book Description: Begin a lucrative career as a forensic structural engineer Looking into the causes of structural deficiencies and failures of buildings, bridges, and other constructed facilities, rendering opinions, and testifying in judicial proceedings, has become a field of professional practice all its own. Forensic Structural Engineering Handbook, edited by Robert T. Ratay, tells you how to become proficient in this area, providing you with procedures, lists of what to watch out for, how to deal with clients, and more. In this only comprehensive guide to the subject, well-known experts explain everything you need to know, from design and construction codes, standards and regulations and technical and legal steps, to engineering analysis of structural defects and failures in steel, concrete, timber and masonry structures, stone and precast cladding, foundations and retaining walls, and temporary structures

http://rapidshare.de/files/20322942/...Hill_2000_.rar

Biaxial/Multiaxial Fatigue and Fracture (European Structural Integrity Society) Summary The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries

9.15MB http://rapidshare.de/files/21074044/...d_Fracture.rar

Structural Vibration, Analysis and Damping By C. Beards * Publisher: Butterworth-Heinemann * Number Of Pages: 276 * Publication Date: 1996-05-31 * ISBN / ASIN: 0340645806 Book Description: Many structures suffer from unwanted vibrations and, although careful analysis at the design stage can minimise these, the vibration levels of many structures are excessive. In this book the entire range of methods of control, both by damping and by excitation, is described in a single volume. Clear and concise descriptions are given of the techniques for mathematically modelling real structures so that the equations which describe the motion of such structures can be derived. This approach leads to a comprehensive discussion of the analysis of typical models of vibrating

structures excited by a range of periodic and random inputs. Careful consideration is also given to the sources of excitation, both internal and external, and the effects of isolation and transmissability. A major part of the book is devoted to damping of structures and many sources of damping are considered, as are the ways of changing damping using both active and passive methods. The numerous worked examples liberally distributed throughout the text, amplify and clarify the theoretical analysis presented. Particular attention is paid to the meaning and interpretation of results, further enhancing the scope and applications of analysis. Over 80 problems are included with answers and worked solutions to most. This book provides engineering students, designers and professional engineers with a detailed insight into the principles involved in the analysis and damping of structural vibration while presenting a sound theoretical basis for further study 14 mb

pass : www.forumakademi.org

http://rapidshare.com/files/16296937...ademi.org_.rar or http://www.megaupload.com/?d=28MDIA2F

Book Properties ISBN: 3527301259 Title: EUROMAT 99, Materials for Building and Structures Author: Folker H. Wittmann Publisher: Wiley-VCH Publication Date: 2000-07-13 Number Of Pages: 262 Average Amazon Rating Editorial Description Building materials are experiencing degradation phenomena due to the long-term action of the atmospheric components. The understanding of the transport characteristics in concrete is a key issue to mitigate the deleterious consequences. Conventional cement-based materials suffer from a lack of ductility. However, modern cement compositions, fiber materials and additions allow to engineer new products adjusted to the purpose. These and several key topics for modern civil engineering

Size: 8.82 MB http://mihd.net/o2ubr8

or http://rapidshare.com/files/39582074/mfbas.rar

Minimum Design Loads for Buildings And Other Structures: SEI/ASCE 7-05 (ASCE Standard No. 7-05) By: Structural Engineering Institute(Other Contributor) ISBN: 0784408092 Publisher: American Society of Civil Engineers (ASCE) - 2005-11-15 Paperback | 424 Pages | List Price: $125.00 (USD) The new ASCE Standard 7-05 Standard (including Supplement No.1) provides requirements for general structural design and includes means for determining dead, live, soil, flood, wind, snow, rain, atmospheric ice, and earthquake loads, and their combinations that are suitable for inclusion in building codes and other documents. A detailed commentary containing explanatory and supplementary information to assist users of ASCE 7-05 is included. This ASCE 7-05 edition is a complete revision of ASCE 7-02. The new Standard includes revised and significantly reorganized provisions for seismic design of structures, as well as revisions in the provisions for determining live, flood, wind, snow, and atmospheric ice loads. The inclusion of Supplement No. 1 into ASCE 7-05 ensures that there is full and complete coordination between the 2006 International Building Code and ASCE 7-05. The updates which comprised Supplement No. 1 are seamlessly integrated into the 7-05 volume, and are not available anywhere else. ASCE 7-05 is an integral part of the building codes of the United States. The earthquake load provisions in ASCE 7-05 are substantially adopted by reference in the 2006 International Building Code and the 2006 NFPA 5000 Building Construction and Safety Code. Numerous other provisions of all other ASCE 705 sections are also adopted by reference by both model building codes including the provisions for calculating wind loads and snow loads. Structural engineers, architects, and those engaged in preparing and administering local building codes will find the structural load requirements essential to their practice

http://mihd.net/q7u5np

The Civil Engineering Handbook, Second Edition ISBN: 0849309581 Author: , Publisher: CRC Press Edition: 2 edition (August 29, 2002) Hardcover: 2904 pages URL: /http://www.amazon.com/exec/obidos/redirect?tag=songstech-20&path=ASIN%2F0849309581 Summary: First published in 1995, the award-winning Civil Engineering Handbook soon became known as the field's definitive reference. To retain its standing as a complete, authoritative resource, the editors have incorporated into this edition the many changes in techniques, tools, and materials that over the last seven years have found their way into civil engineering research and practice.The Civil Engineering Handbook, Second Edition is more comprehensive than ever. You'll find new, updated, and expanded coverage in every section. In fact, more than 1/3 of the handbook is new or substantially revised. In particular you'll find increased focus on computing reflecting the rapid advances in computer technology that has revolutionized many aspects of civil engineering. You'll use it as a survey of the field, you'll use it

to explore a particular subject, but most of all you'll use The Civil Engineering Handbook to answer the problems, questions, and conundrums you encounter in practice

http://rapidshare.de/files/6026416/CiEnHa.rar.html Password: rafcm http://freeit.free.fr/The%20Civil%20Engineering%20Handbook,2003/

CEH(1-10) http://www.megaupload.com/?d=S55L7Y4E CEH(11-20) http://www.megaupload.com/?d=NUSW6DZU CEH(21-30) http://www.megaupload.com/?d=UL5B93TR CEH(31-40) http://www.megaupload.com/?d=JHT9XMAL CEH(41-50) http://www.megaupload.com/?d=60D5J7U7 CEH(51-60) http://www.megaupload.com/?d=CCFPOLOV CEH(61-67) http://www.megaupload.com/?d=YAZ7M95S CEH(Intros&App) http://www.megaupload.com/?d=Z8N5DV12 passwords : www.avaxhome.ru

Soil Mechanics By: William Powrie ISBN: 041531156X Publisher: Spon Press - 2004-09-29 Paperback | 2 Edition | 608 Pages | List Price: $57.95 (USD) | Sales Rank: 1951793 Book Description The aim of this book is to encourage students to develop an understanding of the fundamentals of soil mechanics. It builds a robust and adaptable framework of ideas to support and accommodate the more complex problems and analytical procedures that confront the practising engineer. Soil Mechanics: Concepts and Applications covers the soil mechanics and geotechnical engineering topics typically included in university courses in civil engineering and related subjects. Physical rather than mathematical arguments are used in the core sections wherever possible. The order in which the material is presented is based on the belief that students need time to assimilate new concepts, and that too many new ideas should not be introduced all at once New features for the second edition include: an accompanying website containing the lecturers' solutions manual; new chapters on soil strength and soil behaviour separating the basic and more advanced material to aid understanding; and a new page layout making the book more accessible. size: 4.04 MB http://mihd.net/z6ulao

Solutions Manual for this book, download from (only 2.6 MB) http://rapidshare.com/files/14049035/solutions.rar

Cold-Formed Steel Design, 3rd Edition By Wei-Wen Yu * Publisher: Wiley-Interscience * Number Of Pages: 848 * Publication Date: 2000-06-05 * ISBN / ASIN: 0471348090 $107.72

Book Description: The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Third Edition of the classic text provides you with more of the detailed, up-to-the-minute technical information and expert guidance you need to make optimum use of this incredibly versatile material for building construction. Wei-Wen Yu, an internationally respected authority in the field, draws upon decades of experience in cold-formed steel design, research, teaching, and development of design specifications to provide

guidance on all practical aspects of cold-formed steel design for manufacturing, civil engineering, and building applications. Throughout the book, he describes the structural behavior of cold-formed steel members and connections from both the theoretical and experimental perspectives, and discusses the rationale behind the AISI design provisions. Cold-Formed Steel Design, Third Edition features complete coverage of: * AISI 1996 cold-formed steel design specification with the 1999 supplement * Both ASD and LRFD methods * The latest design procedures for structural members * Updated design information for connections and systems * Contemporary design criteria around the world * The latest computer-aided design techniques Cold-Formed Steel Design, Third Edition is a necessary tool-of-the-trade for structural engineers, manufacturers, construction managers, and architects. It is also an excellent advanced text for college students and researchers in structural engineering, architectural engineering, construction engineering, and related disciplines

http://mihd.net/02a3bh or http://rapidshare.com/files/11574013/0471348090.rar

Handbook of Structural Engineering, 1st Edition ISBN: 0849326745 Title: Handbook of Structural Engineering Publisher: CRC Press Publication Date: 1997-10-24 Number Of Pages: 1600 Covering the broad spectrum of modern structural engineering topics, the Handbook of Structural Engineering is a complete, single-volume reference. It includes the theoretical, practical, and computing aspects of the field, providing practicing engineers, consultants, students, and other interested individuals with a reliable, easy-to-use source of information http://www.megaupload.com/?d=YEQ12L39 http://rapidshare.de/files/18607965/HOSE.rar.html http://rapidshare.de/files/20326475/...s_1999__v3.rar

Uniform Building Code Volume 2(1997).pdf" (3.6 MB) http://www.megaupload.com/?d=28U615UE

Wiley - Project Management - A Systems Approach to Planning, Scheduling, and Controlling - fly.pdf" (33.25 MB) http://www.megaupload.com/?d=41XKPZA6 "(ebook - PDF - Software Development) The

Little Black Book of Project Management.pdf" (2.21 MB) "Thesis Guide.pdf" (305.84 KB) http://www.megaupload.com/?d=04L0ZEXS

"Thesis Research Strategies.pdf" (30.79 KB) http://www.megaupload.com/?d=391FZNBW http://www.megaupload.com/?d=40VIDHUN

"10 Minute Guide to Project Management.pdf" (545.41 KB)

http://www.megaupload.com/?d=24LLQ80B

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF