ASTM Standards

December 5, 2017 | Author: SARVANA | Category: Atoms, Metallic Elements, Evaluation, Reference, Sets Of Chemical Elements
Share Embed Donate


Short Description

List of american Standards...

Description

Doc No AA 1 AA 35 AA 45 AA 46 AAMA 101 AAMA 501 AAMA 606.1 AAMA 607.1 AAMA 608.1 AAMA 609.1 AAMA 610.1 AAMA 800 AAMA 1102.7 AATCC 20 AATCC 70 AATCC 127 ABMA 12.1 ABMA 12.2 ABMA 18.1 ABMA 18.2 ABMA 19.1 ABMA 19.2 ABMA 20 ABMA 22.1 ABMA 22.2 ABMA 23.2 ABMA 24.1 ABMA 24.2 ABMA 25.2 ABMA 26.2 ACI 207.4R ACI 210R ACI 211.1 ACI 214 ACI 304.5R ACI 306.1 ACI 306R ACI 308

ACI 318/318R ACI 336.2R ACI 346 ACI 346R ACI SP-15 ACI 503.1 ACI 503R ACI 506R ACI 544.2R ACI SP-66 ACI 116R ACI 201.1R ACI 201.2R ACI 207.1R ACI 207.2R ACI 211.2 ACI 211.3R ACI 213R ACI 221R ACI 223 ACI 224R ACI 301 ACI 302.1R ACI 303R ACI 304.2R ACI 304.3R ACI 304.4R ACI 304R ACI 305R ACI 309R ACI 311.4R ACI 347R ACI 506.1R ACI 506.2 ACI 506.3R ACI 515.1R ACI 517.2R ACI 530.1 ACI 544.1R ADA 1 ADA 8

ADA 30 CSA/AM A21.14 CSA/AM ANSI Z21.22 CSA/AM ANSI Z21.41 CSA/AM ANSI Z21.41A CSA/AM ANSI Z21.47 CSA/AM ANSI Z21.47A CSA/AM ANSI Z21.47B CSA/AM CSA/ANSI Z21.10.1 CSA/AM CSA/ANSI Z21.10.1A CSA/AM CSA/ANSI Z21.10.1B CSA/AM CSA/ANSI Z21.18 CSA/AM CSA/ANSI Z21.66 CSA/AM Z21.13 CSA/AM Z21.13A CSA/AM Z21.13B CSA/AM Z21.64 CSA/AM Z21.64A CSA/AM CSA/ANSI Z83.8B

CSA/AM CSA/ANSI Z83.11 CSA/AM CSA/ANSI Z83.11B CSA/AM Z83.3 CSA/AM Z83.3A CSA/AM Z83.3B CSA/AM Z83.6A CSA/AM Z83.6B CSA/AM Z83.12 CSA/AM Z83.13 CSA/AM Z83.14 CSA/AM Z83.15 AGMA 904C96 AGMA 908B89 AGMA 2000A88 AGMA 2001C95 AGMA 2003B97 AGMA 2004B89 AGMA 2005C96 AGMA 2011A98 AGMA 6001D97 AGMA 6010F97

AGMA 6021G89 AGMA 6034B92 AGMA 6109A00 AGMA 9000C90 AGMA 9002A86 AIA/NAS NA 0001 AIA/NAS NAS 1 AIA/NAS NA 0002 AIA/NAS NA 0003 AIA/NAS NASM3 AIA/NAS NA 0004 AIA/NAS NASM4 AIA/NAS NA 0005 AIA/NAS NASM5 AIA/NAS NA 0006 AIA/NAS NASM6 AIA/NAS NA 0007 AIA/NAS NASM7 AIA/NAS NA 0008 AIA/NAS NASM8 AIA/NAS NA 0009 AIA/NAS NASM9

AIA/NAS NASM10 AIA/NAS NAS 183 AIA/NAS NASM12 AIA/NAS NA 0013 AIA/NAS NA 0014 AIA/NAS NASM14 AIA/NAS NA 0015 AIA/NAS NA 0016 AIA/NAS NASM16 AIA/NAS NA 0017 AIA/NAS NASM17 AIA/NAS NA 0018 AIA/NAS NASM18 AIA/NAS NA 0019 AIA/NAS NA 0020 AIA/NAS NASM20 AIA/NAS NA 0021 AIA/NAS NA 0022 AIA/NAS NAS 1121 AIA/NAS NAS 1122 AIA/NAS NAS 1123 AIA/NAS NAS 1124

AIA/NAS NAS 1125 AIA/NAS NAS 1126 AIA/NAS NAS 1127 AIA/NAS NAS 1128 AIA/NAS NA 0023 AIA/NAS NA 0024 AIA/NAS NA 0025 AIA/NAS NAS 1740 AIA/NAS NA 0026 AIA/NAS NA 0027 AIA/NAS NA 0028 AIA/NAS NA 0029 AIA/NAS NA 0030 AIA/NAS NA 0033 AIA/NAS NA 0034 AIA/NAS NA 0035 AIA/NAS NA 0036 AIA/NAS NA 0037 AIA/NAS NA 0038 AIA/NAS NA 0039 AIA/NAS NA 0040 AIA/NAS NA 0041

AIA/NAS NA 0042 AIA/NAS NAS 42 AIA/NAS NASM42 AIA/NAS NAS 43 AIA/NAS NASM43 AIA/NAS NA 0044 AIA/NAS NASM44 AIA/NAS NA 0045 AIA/NAS NASM45 AIA/NAS NA 0046 AIA/NAS NASM46 AIA/NAS NA 0047 AIA/NAS NAS 47 AIA/NAS NASM47 AIA/NAS NASM48 AIA/NAS NA 0049 AIA/NAS NASM49 AIA/NAS NA 0050 AIA/NAS NA 0051 AIA/NAS NA 0052 AIA/NAS NA 0053 AIA/NAS NA 0054

AIA/NAS NA 0055 AIA/NAS NA 0056 AIA/NAS NA 0057 AIA/NAS NA 0058 AIA/NAS NA 0059 AIA/NAS NA 0060 AIA/NAS NASM21047 AIA/NAS NASM21299 AIA/NAS NASM21314 AIA/NAS NASM21315 AIA/NAS NA 0061 AIA/NAS NASM45938/1 AIA/NAS NA 0064 AIA/NAS NA 0065 AIA/NAS NA 0066 AIA/NAS NA 0067 AIA/NAS NA 0068 AIA/NAS NA 0069 AIA/NAS NA 0070 AIA/NAS NA 0071 AIA/NAS NA 0072

AIA/NAS NAS 72 AIA/NAS NA 0073 AIA/NAS NAS 73 AIA/NAS NA 0074 AIA/NAS NAS 74 AIA/NAS NAS 75 AIA/NAS NAS 76 AIA/NAS NA 0077 AIA/NAS NAS 77 AIA/NAS NA 0078 AIA/NAS NA 0079 AIA/NAS NA 0080 AIA/NAS NA 0081 AIA/NAS NA 0082 AIA/NAS NA 0083 AIA/NAS NA 0084 AIA/NAS NA 0085 AIA/NAS NA 0086 AIA/NAS NA 0087 AIA/NAS NA 0088 AIA/NAS NA 0089 AIA/NAS NA 0090

AIA/NAS NA 0091 AIA/NAS NA 0092 AIA/NAS NA 0093 AIA/NAS NA 0094 AIA/NAS NA 0095 AIA/NAS NA 0096 AIA/NAS NA 0113 AIA/NAS NA 0114 AIA/NAS NA 0119 AIA/NAS NA 0120 AIA/NAS NA 0121 AIA/NAS NAS 121 AIA/NAS NA 0122 AIA/NAS NA 0123 AIA/NAS NAS 123 AIA/NAS NA 0124 AIA/NAS NA 0125 AIA/NAS NA 0126 AIA/NAS NA 0127 AIA/NAS NA 0128 AIA/NAS NA 0129 AIA/NAS NA 0130

AIA/NAS NA 0131 AIA/NAS NA 0132 AIA/NAS NA 0133 AIA/NAS NA 0134 AIA/NAS NA 0140 AIA/NAS NA 0141 AIA/NAS NASM14201 AIA/NAS NASM28728/1 AIA/NAS NASM28728/2 AIA/NAS NASM28728/3 AIA/NAS NASM28728/4 AIA/NAS NASM28728/5 AIA/NAS NASM28728/6 AIA/NAS NASM28728/7 AIA/NAS NASM28728/8 AIA/NAS NASM3926 AIA/NAS NASM3926/1 AIA/NAS NASM3926/2

AIA/NAS NASM3926/3 AIA/NAS NASM3926/4 AIA/NAS NASM91528 ANSI C78.1420 ASME A112.6.3 ASME Y14.100 ASTM A 182/A 182M REV A ASTM A 192/A 192M ASTM A 193/A 193M REV B ASTM A 194/A 194M REV A ASTM A 20/A 20M REV B ASTM A 213/A 213M REV A ASTM A 234/A 234M REV A ASTM A 249/A 249M REV A ASTM A 312/A 312M REV A ASTM A 370 ASTM A 403/A 403M ASTM A 496 ASTM A 568/A 568M

ASTM A 6/A 6M REV B ASTM A 733 ASTM A 82 ASTM A 861 REV A ASTM B 108 REV A ASTM B 140/B 140M ASTM B 177 ASTM B 232/B 232M ASTM B 250/B 250M ASTM B 272 ASTM B 30 ASTM B 338 REV A ASTM B 746/B 746M ASTM C 216 REV A ASTM C 270 REV A ASTM C 534 REV A ASTM C 56 ASTM C 578 ASTM C 822 REV A ASTM C 827 REV A ASTM D 1363 ASTM D 1510 REV A ASTM D 2013 ASTM D 2170 REV A ASTM D 2172 ASTM D 2414 ASTM D 25 ASTM D 2519

ASTM D 2583 ASTM D 2667 ASTM D 2887 REV A ASTM D 3701 ASTM D 3841 ASTM D 3960 ASTM D 4000 REV A ASTM D 4017 ASTM D 4020 REV A ASTM D 4485 REV A ASTM D 490 ASTM D 5330/D 5330M ASTM D 5470 ASTM D 564 ASTM D 600 ASTM D 611 REV B ASTM D 653 ASTM D 664 ASTM D 69 ASTM D 800 ASTM D 849 ASTM D 878 ASTM D 885 ASTM D 909 ASTM E 1 ASTM E 140 ASTM E 8 ASTM E 8M ASTM F 1047 ASTM F 137

ASTM F 1603 ASTM F 1667 REV A ASTM F 288 ASTM F 468 REV A ASTM F 959M REV A CSA/AM CSA/ANSI Z83.11A CSA/AM CSA/ANSI Z83.8A EIA TIA/EIA455-188 EIA TIA/EIA598-B NSF 5E SAE AMS 2643C SAE AMS 2762B SAE AMS 3374B SAE AMS 4784F SAE AMS 4785F SAE AMS 4786F SAE AMS 4935G SAE AMS 5223F SAE AMS 5363E SAE AMS 5375E SAE AMS 5403A SAE AMS 5404A

SAE AMS 5504M SAE AMS 5592E SAE AMS 5629E SAE AMS 5642K SAE AMS 5687M SAE AMS 5697F SAE AMS 5768K SAE AMS 5779C SAE AMS 6267F SAE AMS 6375B SAE AMS 6417F SAE AMS 6425B SAE AMS 6431L SAE AMS 7719D SAE AS 28775 SAE AS 3479C SAE AS 3480B SAE AS 3481D SAE AS 3482B SAE AS 5176A SAE AS 5406A SAE AS 81935A

SAE AS 9449A SAE AS 9450A SAE AS 9451A SAE AS 9452A SAE AS 9453A SAE AS 9455A SAE AS 9456A SAE AS 9457A SAE AS 9458A SAE AS 9516A SAE AS 9517A SAE AS 9518A SAE AS 9520A SAE AS 9521A SAE AS 9523A SAE AS 9525A SAE AS 9526A SAE AS 9881A SAE AS 9882A SAE J 858 SAE MA 3289A UL 1082 BULLETINS

UL 1236 BULLETINS UL 1262 BULLETINS UL 412 BULLETINS UL 484 BULLETINS UL 489 PROPOSED UL 568 PROPOSED UL 705 BULLETINS UL 96 PROPOSED AIA/NAS NA 0142 AIA/NAS NA 0143 AIA/NAS NA 0144 AIA/NAS NA 0145 AIA/NAS NA 0146 AIA/NAS NA 0147 AIA/NAS NA 0148 AIA/NAS NA 0149 AIA/NAS NA 0150 AIA/NAS NA 0151 AIA/NAS NA 0152 AIA/NAS NA 0153 AIA/NAS NA 0155 AIA/NAS NA 0156

AIA/NAS NA 0157 AIA/NAS NA 0158 AIA/NAS NA 0159 AIA/NAS NA 0160 AIA/NAS NA 0161 AIA/NAS NA 0162 AIA/NAS NA 0163 AIA/NAS NAS 170 AIA/NAS NAS 184 AIA/NAS NAS 186 AIA/NAS NAS 198 AIA/NAS NA 0201 AIA/NAS NA 0202 AIA/NAS NA 0203 AIA/NAS NA 0204 AIA/NAS NA 0211 AIA/NAS NA 0212 AIA/NAS NA 0213 AIA/NAS NA 0221 AIA/NAS NA 0222 AIA/NAS NA 0223 AIA/NAS NA 0224

AIA/NAS NASM229 AIA/NAS NA 0241 AIA/NAS NA 0242 AIA/NAS NA 0243 AIA/NAS NA 0244 AIA/NAS NA 0245 AIA/NAS NA 0247 AIA/NAS NA 0248 AIA/NAS NA 0249 AIA/NAS NA 0250 AIA/NAS NA 0252 AIA/NAS NA 0253 AIA/NAS NASM256 AIA/NAS NAS 287 AIA/NAS NAS 302 AIA/NAS NASM302 AIA/NAS NAS 303 AIA/NAS NAS 304 AIA/NAS NAS 305 AIA/NAS NAS 306 AIA/NAS NAS 307 AIA/NAS NAS 308

AIA/NAS NAS 309 AIA/NAS NAS 310 AIA/NAS NASM310 AIA/NAS NAS 312 AIA/NAS NAS 313 AIA/NAS NAS 314 AIA/NAS NAS 315 AIA/NAS NASM315 AIA/NAS NAS 316 AIA/NAS NASM316 AIA/NAS NAS 317 AIA/NAS NAS 318 AIA/NAS NAS 319 AIA/NAS NAS 320 AIA/NAS NASM320 AIA/NAS NAS 322 AIA/NAS NAS 323 AIA/NAS NAS 324 AIA/NAS NAS 325 AIA/NAS NAS 326 AIA/NAS NAS 327 AIA/NAS NAS 328

AIA/NAS NAS 329 AIA/NAS NAS 330 AIA/NAS NAS 333 AIA/NAS NAS 334 AIA/NAS NAS 335 AIA/NAS NAS 336 AIA/NAS NAS 337 AIA/NAS NAS 338 AIA/NAS NAS 339 AIA/NAS NAS 340 AIA/NAS NAS 354 AIA/NAS NAS 355 AIA/NAS NAS 356 AIA/NAS NAS 357 AIA/NAS NAS 358 AIA/NAS NAS 359 AIA/NAS NAS 360 AIA/NAS NAS 384 AIA/NAS NASM386 AIA/NAS NAS 387 AIA/NAS NAS 388 AIA/NAS NAS 390

AIA/NAS NAS 395 AIA/NAS NAS 396 AIA/NAS NAS 397 AIA/NAS NAS 398 AIA/NAS NAS 399 AIA/NAS NAS 410 AIA/NAS NAS 411 AIA/NAS NAS 424 AIA/NAS NAS 427 AIA/NAS NAS 428 AIA/NAS NAS 451 AIA/NAS NAS 463 AIA/NAS NAS 467 AIA/NAS NAS 487 AIA/NAS NAS 488 AIA/NAS NAS 498 AIA/NAS NAS 500 AIA/NAS NAS 501 AIA/NAS NASM501 AIA/NAS NAS 509 AIA/NAS NAS 513 AIA/NAS NAS 514

AIA/NAS NAS 516 AIA/NAS NAS 517 AIA/NAS NAS 518 AIA/NAS NAS 520 AIA/NAS NAS 521 AIA/NAS NAS 522 AIA/NAS NASM525 AIA/NAS NAS 529 AIA/NAS NAS 537 AIA/NAS NAS 538 AIA/NAS NAS 549 AIA/NAS NAS 551 AIA/NAS NAS 553 AIA/NAS NAS 557 AIA/NAS NAS 558 AIA/NAS NAS 561 AIA/NAS NAS 562 AIA/NAS NAS 563 AIA/NAS NAS 564 AIA/NAS NAS 565 AIA/NAS NASM565 AIA/NAS NAS 566

AIA/NAS NAS 567 AIA/NAS NAS 568 AIA/NAS NAS 569 AIA/NAS NAS 570 AIA/NAS NAS 572 AIA/NAS NAS 573 AIA/NAS NAS 574 AIA/NAS NAS 577 AIA/NAS NAS 578 AIA/NAS NAS 591 AIA/NAS NAS 592 AIA/NAS NAS 593 AIA/NAS NAS 594 AIA/NAS NAS 595 AIA/NAS NAS 596 AIA/NAS NAS 597 AIA/NAS NAS 600 AIA/NAS NAS 601 AIA/NAS NAS 602 AIA/NAS NAS 603 AIA/NAS NAS 604 AIA/NAS NAS 605

AIA/NAS NAS 606 AIA/NAS NAS 607 AIA/NAS NAS 617 AIA/NAS NAS 618 AIA/NAS NAS 620 AIA/NAS NAS 621 AIA/NAS NAS 622 AIA/NAS NAS 623 AIA/NAS NAS 624 AIA/NAS NAS 625 AIA/NAS NAS 626 AIA/NAS NAS 627 AIA/NAS NAS 628 AIA/NAS NAS 629 AIA/NAS NAS 630 AIA/NAS NAS 632 AIA/NAS NAS 634 AIA/NAS NAS 636 AIA/NAS NAS 636A AIA/NAS NAS 638 AIA/NAS NAS 640 AIA/NAS NAS 642

AIA/NAS NAS 644 AIA/NAS NAS 652 AIA/NAS NAS 653 AIA/NAS NAS 654 AIA/NAS NAS 655 AIA/NAS NAS 656 AIA/NAS NAS 657 AIA/NAS NAS 658 AIA/NAS NAS 659 AIA/NAS NAS 661 AIA/NAS NAS 662 AIA/NAS NAS 671 AIA/NAS NAS 673 AIA/NAS NAS 674 AIA/NAS NAS 675 AIA/NAS NAS 676 AIA/NAS NAS 677 AIA/NAS NAS 678 AIA/NAS NAS 679 AIA/NAS NAS 721 AIA/NAS NAS 722 AIA/NAS NAS 723

AIA/NAS NAS 724 AIA/NAS NAS 813 AIA/NAS NAS 814 AIA/NAS NAS 815 AIA/NAS NAS 817 AIA/NAS NAS 818 AIA/NAS NAS 820 AIA/NAS NAS 823 AIA/NAS NAS 831 AIA/NAS NAS 832 AIA/NAS NAS 833 AIA/NAS NAS 834 AIA/NAS NAS 835 AIA/NAS NAS 836 AIA/NAS NAS 837 AIA/NAS NAS 838 AIA/NAS NAS 839 AIA/NAS NAS 840 AIA/NAS NAS 841 AIA/NAS NAS 842 AIA/NAS NAS 843 AIA/NAS NAS 844

AIA/NAS NAS 845 AIA/NAS NAS 846 AIA/NAS NAS 847 AIA/NAS NAS 947 AIA/NAS NASM961 AIA/NAS NASM970 AIA/NAS NAS 1003 AIA/NAS NAS 1004 AIA/NAS NAS 1005 AIA/NAS NAS 1006 AIA/NAS NAS 1007 AIA/NAS NAS 1008 AIA/NAS NAS 1009 AIA/NAS NAS 1010 AIA/NAS NAS 1012 AIA/NAS NAS 1014 AIA/NAS NAS 1016 AIA/NAS NAS 1018 AIA/NAS NAS 1020 AIA/NAS NAS 1023 AIA/NAS NAS 1024 AIA/NAS NAS 1025

AIA/NAS NAS 1026 AIA/NAS NAS 1027 AIA/NAS NAS 1028 AIA/NAS NAS 1029 AIA/NAS NAS 1030 AIA/NAS NAS 1031 AIA/NAS NAS 1032 AIA/NAS NAS 1033 AIA/NAS NAS 1034 AIA/NAS NAS 1035 AIA/NAS NAS 1036 AIA/NAS NAS 1037 AIA/NAS NAS 1038 AIA/NAS NAS 1039 AIA/NAS NAS 1040 AIA/NAS NAS 1041 AIA/NAS NAS 1042 AIA/NAS NAS 1043 AIA/NAS NAS 1044 AIA/NAS NAS 1045 AIA/NAS NAS 1046 AIA/NAS NAS 1047

AIA/NAS NAS 1049 AIA/NAS NAS 1050 AIA/NAS NAS 1051 AIA/NAS NAS 1052 AIA/NAS NAS 1053 AIA/NAS NAS 1054 AIA/NAS NAS 1055 AIA/NAS NAS 1056 AIA/NAS NAS 1057 AIA/NAS NAS 1070 AIA/NAS NAS 1080 AIA/NAS NAS 1081 AIA/NAS NAS 1090 AIA/NAS NAS 1091 AIA/NAS NAS 1097 AIA/NAS NAS 1099 AIA/NAS NAS 1101 AIA/NAS NAS 1102 AIA/NAS NAS 1129 AIA/NAS NAS 1130 AIA/NAS NAS 1131 AIA/NAS NAS 1132

AIA/NAS NAS 1133 AIA/NAS NAS 1134 AIA/NAS NAS 1135 AIA/NAS NAS 1136 AIA/NAS NAS 1137 AIA/NAS NAS 1138 AIA/NAS NAS 1141 AIA/NAS NAS 1142 AIA/NAS NAS 1143 AIA/NAS NAS 1144 AIA/NAS NAS 1145 AIA/NAS NAS 1146 AIA/NAS NAS 1147 AIA/NAS NAS 1148 AIA/NAS NAS 1149 AIA/NAS NAS 1151 AIA/NAS NAS 1152 AIA/NAS NAS 1153 AIA/NAS NAS 1154 AIA/NAS NAS 1155 AIA/NAS NAS 1156 AIA/NAS NAS 1157

AIA/NAS NAS 1158 AIA/NAS NAS 1160 AIA/NAS NAS 1161 AIA/NAS NAS 1162 AIA/NAS NAS 1163 AIA/NAS NAS 1164 AIA/NAS NAS 1165 AIA/NAS NAS 1166 AIA/NAS NAS 1167 AIA/NAS NAS 1168 AIA/NAS NAS 1169 AIA/NAS NAS 1170 AIA/NAS NAS 1171 AIA/NAS NAS 1172 AIA/NAS NAS 1173 AIA/NAS NAS 1174 AIA/NAS NAS 1175 AIA/NAS NAS 1176 AIA/NAS NAS 1177 AIA/NAS NAS 1178 AIA/NAS NAS 1181 AIA/NAS NAS 1182

AIA/NAS NAS 1183 AIA/NAS NAS 1184 AIA/NAS NAS 1185 AIA/NAS NAS 1186 AIA/NAS NAS 1187 AIA/NAS NAS 1188 AIA/NAS NAS 1189 AIA/NAS NAS 1190 AIA/NAS NAS 1191 AIA/NAS NAS 1193 AIA/NAS NAS 1195 AIA/NAS NAS 1197 AIA/NAS NAS 1198 AIA/NAS NAS 1199 AIA/NAS NAS 1200 AIA/NAS NAS 1201 AIA/NAS NAS 1202 AIA/NAS NAS 1203 AIA/NAS NAS 1204 AIA/NAS NAS 1205 AIA/NAS NAS 1206 AIA/NAS NAS 1207

AIA/NAS NAS 1208 AIA/NAS NAS 1209 AIA/NAS NAS 1210 AIA/NAS NAS 1211 AIA/NAS NAS 1212 AIA/NAS NAS 1213 AIA/NAS NAS 1216 AIA/NAS NAS 1218 AIA/NAS NAS 1219 AIA/NAS NAS 1221 AIA/NAS NAS 1223 AIA/NAS NAS 1224 AIA/NAS NAS 1225 AIA/NAS NAS 1226 AIA/NAS NAS 1227 AIA/NAS NAS 1228 AIA/NAS NAS 1229 AIA/NAS NAS 1230 AIA/NAS NAS 1231 AIA/NAS NAS 1232 AIA/NAS NAS 1233 AIA/NAS NAS 1234

AIA/NAS NAS 1235 AIA/NAS NAS 1241 AIA/NAS NAS 1242 AIA/NAS NAS 1251 AIA/NAS NAS 1252 AIA/NAS NAS 1261 AIA/NAS NAS 1262 AIA/NAS NAS 1263 AIA/NAS NAS 1264 AIA/NAS NAS 1265 AIA/NAS NAS 1266 AIA/NAS NAS 1267 AIA/NAS NAS 1268 AIA/NAS NAS 1269 AIA/NAS NAS 1270 AIA/NAS NAS 1271 AIA/NAS NAS 1272 AIA/NAS NAS 1273 AIA/NAS NAS 1274 AIA/NAS NAS 1275 AIA/NAS NAS 1276 AIA/NAS NAS 1277

AIA/NAS NAS 1278 AIA/NAS NAS 1279 AIA/NAS NAS 1280 AIA/NAS NAS 1281 AIA/NAS NAS 1282 AIA/NAS NAS 1284 AIA/NAS NAS 1285 AIA/NAS NAS 1287 AIA/NAS NAS 1288 AIA/NAS NAS 1291 AIA/NAS NAS 1292 AIA/NAS NAS 1293 AIA/NAS NAS 1294 AIA/NAS NAS 1295 AIA/NAS NAS 1296 AIA/NAS NAS 1297 AIA/NAS NAS 1298 AIA/NAS NAS 1299 AIA/NAS NAS 1300 AIA/NAS NAS 1301 AIA/NAS NAM1312-105

AIA/NAS NAM1312-107 AIA/NAS NAM1312-108 AIA/NAS NAM1312-109 AIA/NAS NAM1312-111 AIA/NAS NAM1312-113 AIA/NAS NASM1312 AIA/NAS NASM1312-1 AIA/NAS NASM1312-2 AIA/NAS NASM1312-3 AIA/NAS NASM1312-4 AIA/NAS NASM1312-5 AIA/NAS NASM1312-6 AIA/NAS NASM1312-7 AIA/NAS NASM1312-8 AIA/NAS NASM1312-9 AIA/NAS NASM1312-10 AIA/NAS NASM1312-11 AIA/NAS NASM1312-12

AIA/NAS NASM1312-13 AIA/NAS NASM1312-14 AIA/NAS NASM1312-15 AIA/NAS NASM1312-16 AIA/NAS NASM1312-17 AIA/NAS NASM1312-18 AIA/NAS NASM1312-19 AIA/NAS NASM1312-20 AIA/NAS NASM1312-21 AIA/NAS NASM1312-22 AIA/NAS NASM1312-23 AIA/NAS NASM1312-24 AIA/NAS NASM1312-25 AIA/NAS NASM1312-26

AIA/NAS NASM1312-27 AIA/NAS NASM1312-28 AIA/NAS NASM1312-29 AIA/NAS NASM1312-30 AIA/NAS NASM1312-31 AIA/NAS NAS 1321 AIA/NAS NAS 1322 AIA/NAS NAS 1323 AIA/NAS NAS 1324 AIA/NAS NAS 1325 AIA/NAS NAS 1326 AIA/NAS NAS 1328 AIA/NAS NAS 1329 AIA/NAS NAS 1330 AIA/NAS NAS 1332 AIA/NAS NAS 1333 AIA/NAS NAS 1334 AIA/NAS NAS 1335 AIA/NAS NAS 1336

AIA/NAS NAS 1337 AIA/NAS NAS 1338 AIA/NAS NAS 1339 AIA/NAS NAS 1340 AIA/NAS NAS 1341 AIA/NAS NAS 1342 AIA/NAS NAS 1343 AIA/NAS NAS 1344 AIA/NAS NAS 1345 AIA/NAS NAS 1346 AIA/NAS NAS 1347 AIA/NAS NAS 1349 AIA/NAS NAS 1351 AIA/NAS NAS 1353 AIA/NAS NAS 1354 AIA/NAS NAS 1352 AIA/NAS NAS 1355 AIA/NAS NAS 1356 AIA/NAS NAS 1357 AIA/NAS NAS 1358 AIA/NAS NAS 1359 AIA/NAS NAS 1360

AIA/NAS NAS 1361 AIA/NAS NAS 1362 AIA/NAS NAS 1363 AIA/NAS NAS 1364 AIA/NAS NAS 1365 AIA/NAS NAS 1366 AIA/NAS NAS 1368 AIA/NAS NAS 1369 AIA/NAS NAS 1370 AIA/NAS NAS 1371 AIA/NAS NAS 1372 AIA/NAS NAS 1373 AIA/NAS NAS 1374 AIA/NAS NAS 1375 AIA/NAS NAS 1376 AIA/NAS NAS 1377 AIA/NAS NAS 1378 AIA/NAS NAS 1379 AIA/NAS NAS 1382 AIA/NAS NAS 1383 AIA/NAS NAS 1384 AIA/NAS NAS 1385

AIA/NAS NAS 1394 AIA/NAS NAS 1395 AIA/NAS NAS 1396 AIA/NAS NAS 1397 AIA/NAS NAS 1398 AIA/NAS NAS 1399 AIA/NAS NAS 1400 AIA/NAS NAS 1401 AIA/NAS NAS 1410 AIA/NAS NAS 1412 AIA/NAS NAS 1413 AIA/NAS NAS 1414 AIA/NAS NAS 1415 AIA/NAS NAS 1416 AIA/NAS NAS 1418 AIA/NAS NAS 1420 AIA/NAS NAS 1422 AIA/NAS NAS 1423 AIA/NAS NAS 1424 AIA/NAS NAS 1425 AIA/NAS NAS 1426 AIA/NAS NAS 1428

AIA/NAS NAS 1430 AIA/NAS NAS 1432 AIA/NAS NAS 1435 AIA/NAS NAS 1436 AIA/NAS NAS 1438 AIA/NAS NAS 1440 AIA/NAS NAS 1442 AIA/NAS NAS 1443 AIA/NAS NAS 1446 AIA/NAS NAS 1448 AIA/NAS NAS 1450 AIA/NAS NAS 1452 AIA/NAS NAS 1453 AIA/NAS NAS 1455 AIA/NAS NAS 1456 AIA/NAS NAS 1458 AIA/NAS NAS 1460 AIA/NAS NAS 1462 AIA/NAS NAS 1463 AIA/NAS NAS 1464 AIA/NAS NAS 1465 AIA/NAS NAS 1466

AIA/NAS NAS 1468 AIA/NAS NAS 1470 AIA/NAS NAS 1472 AIA/NAS NAS 1473 AIA/NAS NAS 1474 AIA/NAS NAS 1475 AIA/NAS NAS 1476 AIA/NAS NAS 1478 AIA/NAS NAS 1480 AIA/NAS NAS 1482 AIA/NAS NAS 1486 AIA/NAS NAS 1488 AIA/NAS NAS 1490 AIA/NAS NAS 1492 AIA/NAS NAS 1493 AIA/NAS NAS 1496 AIA/NAS NAS 1497 AIA/NAS NAS 1498 AIA/NAS NAS 1500 AIA/NAS NAS 1502 AIA/NAS NAS 1512 AIA/NAS NAS 1513

AIA/NAS NAS 1514 AIA/NAS NAS 1515 AIA/NAS NASM1515 AIA/NAS NAS 1516 AIA/NAS NAS 1518 AIA/NAS NAS 1520 AIA/NAS NAS 1522 AIA/NAS NAS 1523 AIA/NAS NAS 1525 AIA/NAS NAS 1526 AIA/NAS NAS 1528 AIA/NAS NAS 1530 AIA/NAS NAS 1532 AIA/NAS NAS 1535 AIA/NAS NAS 1536 AIA/NAS NAS 1538 AIA/NAS NAS 1540 AIA/NAS NAS 1542 AIA/NAS NAS 1546 AIA/NAS NAS 1548 AIA/NAS NAS 1550 AIA/NAS NAS 1552

AIA/NAS NAS 1553 AIA/NAS NAS 1554 AIA/NAS NAS 1555 AIA/NAS NAS 1556 AIA/NAS NAS 1558 AIA/NAS NAS 1560 AIA/NAS NAS 1562 AIA/NAS NAS 1563 AIA/NAS NAS 1564 AIA/NAS NAS 1578 AIA/NAS NAS 1580 AIA/NAS NAS 1581 AIA/NAS NAS 1587 AIA/NAS NAS 1598 AIA/NAS NAS 1603 AIA/NAS NAS 1604 AIA/NAS NAS 1605 AIA/NAS NAS 1606 AIA/NAS NAS 1607 AIA/NAS NAS 1608 AIA/NAS NAS 1609 AIA/NAS NAS 1610

AIA/NAS NAS 1611 AIA/NAS NAS 1612 AIA/NAS NAS 1613 AIA/NAS NAS 1620 AIA/NAS NAS 1621 AIA/NAS NAS 1622 AIA/NAS NAS 1623 AIA/NAS NAS 1624 AIA/NAS NAS 1625 AIA/NAS NAS 1626 AIA/NAS NAS 1627 AIA/NAS NAS 1628 AIA/NAS NAS 1630 AIA/NAS NAS 1631 AIA/NAS NAS 1632 AIA/NAS NAS 1633 AIA/NAS NAS 1634 AIA/NAS NAS 1635 AIA/NAS NAS 1636 AIA/NAS NAS 1637 AIA/NAS NAS 1640 AIA/NAS NAS 1669

AIA/NAS NAS 1670 AIA/NAS NAS 1671 AIA/NAS NAS 1672 AIA/NAS NAS 1673 AIA/NAS NAS 1674 AIA/NAS NAS 1675 AIA/NAS NAS 1676 AIA/NAS NAS 1677 AIA/NAS NAS 1686 AIA/NAS NAS 1687 AIA/NAS NAS 1688 AIA/NAS NAS 1690 AIA/NAS NAS 1691 AIA/NAS NAS 1703 AIA/NAS NAS 1704 AIA/NAS NAS 1705 AIA/NAS NAS 1706 AIA/NAS NAS 1707 AIA/NAS NAS 1708 AIA/NAS NAS 1709 AIA/NAS NAS 1710 AIA/NAS NAS 1711

AIA/NAS NAS 1712 AIA/NAS NAS 1713 AIA/NAS NAS 1714 AIA/NAS NAS 1715 AIA/NAS NAS 1716 AIA/NAS NAS 1719 AIA/NAS NAS 1720 AIA/NAS NAS 1721 AIA/NAS NAS 1722 AIA/NAS NAS 1724 AIA/NAS NAS 1725 AIA/NAS NAS 1726 AIA/NAS NAS 1727 AIA/NAS NAS 1728 AIA/NAS NAS 1729 AIA/NAS NAS 1730 AIA/NAS NAS 1731 AIA/NAS NAS 1732 AIA/NAS NAS 1734 AIA/NAS NAS 1735 AIA/NAS NAS 1736 AIA/NAS NAS 1738

AIA/NAS NAS 1739 AIA/NAS NAS 1750 AIA/NAS NAS 1751 AIA/NAS NAS 1752 AIA/NAS NAS 1753 AIA/NAS NAS 1754 AIA/NAS NAS 1755 AIA/NAS NAS 1757 AIA/NAS NAS 1758 AIA/NAS NAS 1759 AIA/NAS NAS 1760 AIA/NAS NAS 1761 AIA/NAS NAS 1762 AIA/NAS NAS 1763 AIA/NAS NAS 1764 AIA/NAS NAS 1765 AIA/NAS NAS 1766 AIA/NAS NAS 1767 AIA/NAS NAS 1768 AIA/NAS NAS 1769 AIA/NAS NAS 1770 AIA/NAS NAS 1771

AIA/NAS NAS 1772 AIA/NAS NAS 1773 AIA/NAS NAS 1774 AIA/NAS NAS 1775 AIA/NAS NAS 1776 AIA/NAS NAS 1777 AIA/NAS NAS 1778 AIA/NAS NAS 1779 AIA/NAS NAS 1780 AIA/NAS NAS 1781 AIA/NAS NAS 1782 AIA/NAS NAS 1783 AIA/NAS NAS 1784 AIA/NAS NAS 1785 AIA/NAS NAS 1787 AIA/NAS NAS 1789 AIA/NAS NAS 1790 AIA/NAS NAS 1791 AIA/NAS NAS 1792 AIA/NAS NAS 1793 AIA/NAS NAS 1794 AIA/NAS NAS 1795

AIA/NAS NAS 1801 AIA/NAS NAS 1802 AIA/NAS NAS 1803 AIA/NAS NAS 1804 AIA/NAS NAS 1805 AIA/NAS NAS 1829 AIA/NAS NAS 1830 AIA/NAS NAS 1831 AIA/NAS NAS 1832 AIA/NAS NAS 1833 AIA/NAS NAS 1834 AIA/NAS NAS 1835 AIA/NAS NAS 1836 AIA/NAS NAS 1837 AIA/NAS NAS 1841 AIA/NAS NAS 1842 AIA/NAS NAS 1843 AIA/NAS NAS 1844 AIA/NAS NAS 1845 AIA/NAS NAS 1846 AIA/NAS NAS 1847 AIA/NAS NAS 1848

AIA/NAS NAS 1849 AIA/NAS NAS 1850 AIA/NAS NAS 1851 AIA/NAS NAS 1852 AIA/NAS NAS 1853 AIA/NAS NAS 1854 AIA/NAS NAS 1860 AIA/NAS NAS 1861 AIA/NAS NAS 1862 AIA/NAS NAS 1863 AIA/NAS NAS 1870 AIA/NAS NAS 1871 AIA/NAS NAS 1872 AIA/NAS NAS 1873 AIA/NAS NAS 1900 AIA/NAS NAS 1919 AIA/NAS NAS 1921 AIA/NAS NAS 1922 AIA/NAS NAS 1923 AIA/NAS NAS 1925 AIA/NAS NAS 1972 AIA/NAS NAS 1973

AIA/NAS NAS 1974 AIA/NAS NAS 1975 AIA/NAS NAS 1976 AIA/NAS NAS 1977 AIA/NAS NAS 1978 AIA/NAS NAS 1979 AIA/NAS NAS 1980 AIA/NAS NAS 1982 AIA/NAS NAS 1983 AIA/NAS NAS 1984 AIA/NAS NAS 1985 AIA/NAS NAS 1986 AIA/NAS NAS 1987 AIA/NAS NAS 1988 AIA/NAS NAS 1989 AIA/NAS NAS 1990 AIA/NAS NAS 1992 AIA/NAS NAS 1993 AIA/NAS NAS 1994 AIA/NAS NAS 1995 AIA/NAS NAS 1996 AIA/NAS NAS 1997

AIA/NAS NAS 1998 AIA/NAS NAS 1999 AIA/NAS NAS 2000 AIA/NAS NAS 2005 AIA/NAS NAS 2006 AIA/NAS NAS 2008 AIA/NAS NAS 2010 AIA/NAS NAS 2012 AIA/NAS NAS 2013 AIA/NAS NAS 2014 AIA/NAS NAS 2015 AIA/NAS NAS 2016 AIA/NAS NAS 2018 AIA/NAS NAS 2020 AIA/NAS NAS 2022 AIA/NAS NAS 2025 AIA/NAS NAS 2026 AIA/NAS NAS 2028 AIA/NAS NAS 2030 AIA/NAS NAS 2032 AIA/NAS NAS 2035 AIA/NAS NAS 2036

AIA/NAS NAS 2038 AIA/NAS NAS 2040 AIA/NAS NAS 2042 AIA/NAS NAS 2045 AIA/NAS NAS 2046 AIA/NAS NAS 2048 AIA/NAS NAS 2050 AIA/NAS NAS 2052 AIA/NAS NAS 2055 AIA/NAS NAS 2056 AIA/NAS NAS 2058 AIA/NAS NAS 2060 AIA/NAS NAS 2062 AIA/NAS NAS 2065 AIA/NAS NAS 2066 AIA/NAS NAS 2068 AIA/NAS NAS 2070 AIA/NAS NAS 2072 AIA/NAS NAS 2105 AIA/NAS NAS 2106 AIA/NAS NAS 2108 AIA/NAS NAS 2110

AIA/NAS NAS 2112 AIA/NAS NAS 2115 AIA/NAS NAS 2116 AIA/NAS NAS 2118 AIA/NAS NAS 2120 AIA/NAS NAS 2122 AIA/NAS NAS 2125 AIA/NAS NAS 2126 AIA/NAS NAS 2128 AIA/NAS NAS 2130 AIA/NAS NAS 2132 AIA/NAS NAS 2205 AIA/NAS NAS 2206 AIA/NAS NAS 2208 AIA/NAS NAS 2210 AIA/NAS NAS 2212 AIA/NAS NAS 2306 AIA/NAS NAS 2308 AIA/NAS NAS 2310 AIA/NAS NAS 2312 AIA/NAS NAS 2406 AIA/NAS NAS 2408

AIA/NAS NAS 2410 AIA/NAS NAS 2412 AIA/NAS NAS 2506 AIA/NAS NAS 2508 AIA/NAS NAS 2510 AIA/NAS NAS 2512 AIA/NAS NAS 2605 AIA/NAS NAS 2606 AIA/NAS NAS 2608 AIA/NAS NAS 2610 AIA/NAS NAS 2612 AIA/NAS NAS 2705 AIA/NAS NAS 2706 AIA/NAS NAS 2708 AIA/NAS NAS 2710 AIA/NAS NAS 2712 AIA/NAS NAS 2803 AIA/NAS NAS 2804 AIA/NAS NAS 2805 AIA/NAS NAS 2806 AIA/NAS NAS 2807 AIA/NAS NAS 2808

AIA/NAS NAS 2809 AIA/NAS NAS 2810 AIA/NAS NAS 2813 AIA/NAS NAS 2814 AIA/NAS NAS 2815 AIA/NAS NAS 2816 AIA/NAS NAS 2817 AIA/NAS NAS 2818 AIA/NAS NAS 2819 AIA/NAS NAS 2820 AIA/NAS NAS 2822 AIA/NAS NAS 2824 AIA/NAS NAS 2826 AIA/NAS NAS 2828 AIA/NAS NAS 2830 AIA/NAS NAS 2832 AIA/NAS NAS 2833 AIA/NAS NAS 2834 AIA/NAS NAS 2835 AIA/NAS NAS 2836 AIA/NAS NAS 2837 AIA/NAS NAS 2838

AIA/NAS NAS 2839 AIA/NAS NAS 2840 AIA/NAS NAS 2842 AIA/NAS NAS 2843 AIA/NAS NAS 2844 AIA/NAS NAS 2845 AIA/NAS NAS 2846 AIA/NAS NAS 2847 AIA/NAS NAS 2848 AIA/NAS NAS 2849 AIA/NAS NAS 2850 AIA/NAS NAS 2852 AIA/NAS NAS 2853 AIA/NAS NAS 2854 AIA/NAS NAS 2855 AIA/NAS NAS 2856 AIA/NAS NAS 2857 AIA/NAS NAS 2858 AIA/NAS NAS 2859 AIA/NAS NAS 2860 AIA/NAS NASM3036 AIA/NAS NAS 3103

AIA/NAS NAS 3104 AIA/NAS NAS 3105 AIA/NAS NAS 3106 AIA/NAS NAS 3108 AIA/NAS NAS 3110 AIA/NAS NAS 3203 AIA/NAS NAS 3204 AIA/NAS NAS 3205 AIA/NAS NAS 3206 AIA/NAS NAS 3208 AIA/NAS NAS 3210 AIA/NAS NASM3212 AIA/NAS NASM3213 AIA/NAS NASM3214 AIA/NAS NAS 3303 AIA/NAS NAS 3304 AIA/NAS NAS 3305 AIA/NAS NASM3369 AIA/NAS NAS 3417 AIA/NAS NAS 3426 AIA/NAS NASM3498 AIA/NAS NAS 4006

AIA/NAS NAS 4121 AIA/NAS NAS 4123 AIA/NAS NAS 4450 AIA/NAS NAS 4452 AIA/NAS NAS 4458 AIA/NAS NAS 4466 AIA/NAS NASM5591 AIA/NAS NASM5673 AIA/NAS NASM5674 AIA/NAS NAS 6203 AIA/NAS NAS 6204 AIA/NAS NAS 6205 AIA/NAS NAS 6206 AIA/NAS NAS 6207 AIA/NAS NAS 6208 AIA/NAS NAS 6209 AIA/NAS NAS 6210 AIA/NAS NAS 6212 AIA/NAS NAS 6214 AIA/NAS NAS 6216 AIA/NAS NAS 6218 AIA/NAS NAS 6220

AIA/NAS NAS 6303 AIA/NAS NAS 6304 AIA/NAS NAS 6305 AIA/NAS NAS 6306 AIA/NAS NAS 6307 AIA/NAS NAS 6308 AIA/NAS NAS 6309 AIA/NAS NAS 6310 AIA/NAS NAS 6312 AIA/NAS NAS 6314 AIA/NAS NAS 6316 AIA/NAS NAS 6318 AIA/NAS NAS 6320 AIA/NAS NAS 6403 AIA/NAS NAS 6603 AIA/NAS NAS 6604 AIA/NAS NAS 6605 AIA/NAS NAS 6606 AIA/NAS NAS 6607 AIA/NAS NAS 6404 AIA/NAS NAS 6405 AIA/NAS NAS 6406

AIA/NAS NAS 6407 AIA/NAS NAS 6408 AIA/NAS NAS 6409 AIA/NAS NAS 6410 AIA/NAS NAS 6412 AIA/NAS NAS 6414 AIA/NAS NAS 6416 AIA/NAS NAS 6418 AIA/NAS NAS 6420 AIA/NAS NAS 6608 AIA/NAS NAS 6609 AIA/NAS NAS 6610 AIA/NAS NAS 6612 AIA/NAS NAS 6614 AIA/NAS NAS 6616 AIA/NAS NAS 6618 AIA/NAS NAS 6620 AIA/NAS NAS 6703 AIA/NAS NAS 6704 AIA/NAS NAS 6705 AIA/NAS NAS 6706 AIA/NAS NAS 6707

AIA/NAS NAS 6708 AIA/NAS NAS 6709 AIA/NAS NAS 6710 AIA/NAS NAS 6712 AIA/NAS NAS 6714 AIA/NAS NAS 6716 AIA/NAS NAS 6718 AIA/NAS NAS 6720 AIA/NAS NAS 6803 AIA/NAS NAS 6804 AIA/NAS NAS 6805 AIA/NAS NAS 6806 AIA/NAS NAS 6807 AIA/NAS NAS 6808 AIA/NAS NAS 6809 AIA/NAS NAS 6810 AIA/NAS NAS 6812 AIA/NAS NASM6812 AIA/NAS NAS 6814 AIA/NAS NAS 6816 AIA/NAS NAS 6818 AIA/NAS NASM6818

AIA/NAS NAS 6820 AIA/NAS NAS 6913 AIA/NAS NAS 6914 AIA/NAS NAS 6915 AIA/NAS NAS 6916 AIA/NAS NAS 6918 AIA/NAS NAS 6920 AIA/NAS NAS 6922 AIA/NAS NAS 6925 AIA/NAS NAS 6926 AIA/NAS NAS 6928 AIA/NAS NAS 6930 AIA/NAS NAS 6932 AIA/NAS NAS 6935 AIA/NAS NAS 6936 AIA/NAS NAS 6938 AIA/NAS NAS 6940 AIA/NAS NAS 6942 AIA/NAS NAS 6946 AIA/NAS NAS 6948 AIA/NAS NAS 6950 AIA/NAS NAS 6952

AIA/NAS NAS 6955 AIA/NAS NAS 6956 AIA/NAS NAS 6958 AIA/NAS NAS 6960 AIA/NAS NAS 6962 AIA/NAS NAS 6965 AIA/NAS NAS 6966 AIA/NAS NAS 6968 AIA/NAS NAS 6970 AIA/NAS NAS 6972 AIA/NAS NAS 6974 AIA/NAS NAS 6975 AIA/NAS NAS 6976 AIA/NAS NAS 6978 AIA/NAS NAS 6980 AIA/NAS NAS 6982 AIA/NAS NAS 6984 AIA/NAS NAS 6985 AIA/NAS NAS 6986 AIA/NAS NAS 6988 AIA/NAS NAS 6990 AIA/NAS NAS 6992

AIA/NAS NAS 7004 AIA/NAS NAS 7005 AIA/NAS NAS 7006 AIA/NAS NAS 7008 AIA/NAS NAS 7010 AIA/NAS NAS 7012 AIA/NAS NAS 7014 AIA/NAS NAS 7015 AIA/NAS NAS 7016 AIA/NAS NAS 7018 AIA/NAS NAS 7020 AIA/NAS NAS 7022 AIA/NAS NAS 7024 AIA/NAS NAS 7025 AIA/NAS NAS 7026 AIA/NAS NAS 7028 AIA/NAS NAS 7030 AIA/NAS NAS 7032 AIA/NAS NAS 7034 AIA/NAS NAS 7035 AIA/NAS NAS 7036 AIA/NAS NAS 7038

AIA/NAS NAS 7040 AIA/NAS NAS 7042 AIA/NAS NAS 7100 AIA/NAS NAS 7101 AIA/NAS NAS 7103 AIA/NAS NAS 7104 AIA/NAS NAS 7105 AIA/NAS NAS 7106 AIA/NAS NAS 7107 AIA/NAS NAS 7108 AIA/NAS NAS 7109 AIA/NAS NAS 7110 AIA/NAS NAS 7112 AIA/NAS NAS 7114 AIA/NAS NAS 7116 AIA/NAS NAS 7203 AIA/NAS NAS 7204 AIA/NAS NAS 7205 AIA/NAS NAS 7206 AIA/NAS NAS 7207 AIA/NAS NAS 7208 AIA/NAS NAS 7209

AIA/NAS NAS 7210 AIA/NAS NAS 7212 AIA/NAS NAS 7214 AIA/NAS NAS 7216 AIA/NAS NAS 7303 AIA/NAS NAS 7304 AIA/NAS NAS 7305 AIA/NAS NAS 7306 AIA/NAS NAS 7307 AIA/NAS NAS 7308 AIA/NAS NAS 7309 AIA/NAS NAS 7310 AIA/NAS NAS 7312 AIA/NAS NAS 7314 AIA/NAS NAS 7316 AIA/NAS NAS 7400 AIA/NAS NAS 7401 AIA/NAS NAS 7402 AIA/NAS NAS 7403 AIA/NAS NAS 7404 AIA/NAS NAS 7405 AIA/NAS NAS 7406

AIA/NAS NAS 7407 AIA/NAS NAS 7408 AIA/NAS NAS 7409 AIA/NAS NAS 7410 AIA/NAS NAS 7412 AIA/NAS NAS 7414 AIA/NAS NAS 7416 AIA/NAS NAS 7500 AIA/NAS NAS 7501 AIA/NAS NAS 7502 AIA/NAS NAS 7503 AIA/NAS NAS 7504 AIA/NAS NAS 7505 AIA/NAS NAS 7506 AIA/NAS NAS 7507 AIA/NAS NAS 7508 AIA/NAS NAS 7509 AIA/NAS NAS 7510 AIA/NAS NAS 7512 AIA/NAS NAS 7514 AIA/NAS NAS 7516 AIA/NAS NAS 7600

AIA/NAS NAS 7601 AIA/NAS NAS 7602 AIA/NAS NAS 7603 AIA/NAS NAS 7604 AIA/NAS NAS 7605 AIA/NAS NAS 7606 AIA/NAS NAS 7607 AIA/NAS NAS 7608 AIA/NAS NAS 7609 AIA/NAS NAS 7610 AIA/NAS NAS 7612 AIA/NAS NAS 7614 AIA/NAS NAS 7616 AIA/NAS NAS 7700 AIA/NAS NAS 7701 AIA/NAS NAS 7702 AIA/NAS NAS 7703 AIA/NAS NAS 7704 AIA/NAS NAS 7705 AIA/NAS NAS 7706 AIA/NAS NAS 7800 AIA/NAS NAS 7801

AIA/NAS NAS 7802 AIA/NAS NAS 7803 AIA/NAS NAS 7804 AIA/NAS NAS 7805 AIA/NAS NAS 7806 AIA/NAS NASM7838 AIA/NAS NASM7839 AIA/NAS NASM7873 AIA/NAS NASM7874 AIA/NAS NAS 7900 AIA/NAS NAS 7901 AIA/NAS NAS 7902 AIA/NAS NAS 7903 AIA/NAS NAS 7904 AIA/NAS NAS 7905 AIA/NAS NAS 7906 AIA/NAS NAS 8000 AIA/NAS NAS 8001 AIA/NAS NAS 8002 AIA/NAS NAS 8003 AIA/NAS NAS 8004 AIA/NAS NAS 8005

AIA/NAS NAS 8006 AIA/NAS NAS 8100 AIA/NAS NAS 8101 AIA/NAS NAS 8102 AIA/NAS NAS 8103 AIA/NAS NAS 8104 AIA/NAS NAS 8105 AIA/NAS NAS 8106 AIA/NAS NAS 8200 AIA/NAS NAS 8201 AIA/NAS NAS 8202 AIA/NAS NAS 8203 AIA/NAS NAS 8204 AIA/NAS NAS 8205 AIA/NAS NAS 8206 AIA/NAS NAS 8302 AIA/NAS NAS 8303 AIA/NAS NAS 8304 AIA/NAS NAS 8602 AIA/NAS NAS 8603 AIA/NAS NAS 8604 AIA/NAS NAS 8605

AIA/NAS NAS 8606 AIA/NAS NAS 8607 AIA/NAS NAS 8608 AIA/NAS NAS 8609 AIA/NAS NAS 8610 AIA/NAS NAS 8612 AIA/NAS NAS 8614 AIA/NAS NAS 8616 AIA/NAS NAS 8802 AIA/NAS NAS 8803 AIA/NAS NAS 8804 AIA/NAS NAS 8805 AIA/NAS NAS 8806 AIA/NAS NAS 8807 AIA/NAS NAS 8808 AIA/NAS NAS 8809 AIA/NAS NAS 8810 AIA/NAS NAS 8812 AIA/NAS NAS 8814 AIA/NAS NASM8814 AIA/NAS NAS 8816 AIA/NAS NASM8831

AIA/NAS NASM8846 AIA/NAS NASM8906 AIA/NAS NASM8906/2 AIA/NAS NASM8907 AIA/NAS NASM8922 AIA/NAS NASM8922/1 AIA/NAS NASM8975 AIA/NAS NASM8975/1 AIA/NAS NASM8975/2 AIA/NAS NASM8975/3 AIA/NAS NASM8975/4 AIA/NAS NASM8975/5 AIA/NAS NASM8975/6 AIA/NAS NASM8975/7 AIA/NAS NASM8984 AIA/NAS NASM8985 AIA/NAS NAS 9001 AIA/NAS NAS 9002 AIA/NAS NAS 9003 AIA/NAS NAS 9004 AIA/NAS NAS 9005 AIA/NAS NAS 9006

AIA/NAS NASM9006 AIA/NAS NAS 9101 AIA/NAS NAS 9102 AIA/NAS NAS 9103 AIA/NAS NAS 9104 AIA/NAS NAS 9105 AIA/NAS NAS 9106 AIA/NAS NAS 9201 AIA/NAS NAS 9202 AIA/NAS NAS 9203 AIA/NAS NAS 9204 AIA/NAS NAS 9205 AIA/NAS NAS 9206 AIA/NAS NAS 9301 AIA/NAS NAS 9302 AIA/NAS NAS 9303 AIA/NAS NAS 9304 AIA/NAS NAS 9305 AIA/NAS NAS 9306 AIA/NAS NAS 9307 AIA/NAS NAS 9308 AIA/NAS NAS 9309

AIA/NAS NAS 9310 AIA/NAS NAS 9311 AIA/NAS NAS 9312 AIA/NAS NASM10971 AIA/NAS NASM14144 AIA/NAS NASM14145 AIA/NAS NASM14151 AIA/NAS NASM14155 AIA/NAS NASM14156 AIA/NAS NASM14157 AIA/NAS NASM14164 AIA/NAS NASM14177 AIA/NAS NASM14179 AIA/NAS NASM14181 AIA/NAS NASM14182 AIA/NAS NASM14183 AIA/NAS NASM14191 AIA/NAS NASM14198 AIA/NAS NASM14200 AIA/NAS NASM14210 AIA/NAS NASM14213 AIA/NAS NASM14214

AIA/NAS NASM14218 AIA/NAS NASM14219 AIA/NAS NASM14222 AIA/NAS NAM14290 AIA/NAS NASM14490 AIA/NAS NASM14491 AIA/NAS NASM14493 AIA/NAS NASM14531 AIA/NAS NASM15795 AIA/NAS NASM15981 AIA/NAS NASM16187 AIA/NAS NASM16205 AIA/NAS NASM16206 AIA/NAS NASM16208 AIA/NAS NASM16218 AIA/NAS NASM16228 AIA/NAS NASM16491 AIA/NAS NASM16491/1 AIA/NAS NASM16491/2 AIA/NAS NASM16491/3

AIA/NAS NASM16535 AIA/NAS NASM16536 AIA/NAS NASM16555 AIA/NAS NASM16556 AIA/NAS NASM16562 AIA/NAS NASM16610 AIA/NAS NASM16995 AIA/NAS NASM16996 AIA/NAS NASM17731 AIA/NAS NASM17732 AIA/NAS NASM17828 AIA/NAS NASM17829 AIA/NAS NASM17830 AIA/NAS NASM17855 AIA/NAS NASM17984 AIA/NAS NASM17985 AIA/NAS NASM17986 AIA/NAS NASM17987 AIA/NAS NASM17988 AIA/NAS NASM17989 AIA/NAS NASM17990 AIA/NAS NASM18063

AIA/NAS NASM18064 AIA/NAS NASM18067 AIA/NAS NASM20002 AIA/NAS NASM20004 AIA/NAS NASM20005 AIA/NAS NASM20006 AIA/NAS NASM20007 AIA/NAS NASM20008 AIA/NAS NASM20009 AIA/NAS NASM20010 AIA/NAS NASM20012 AIA/NAS NASM20014 AIA/NAS NASM20016 AIA/NAS NASM20017 AIA/NAS NASM20018 AIA/NAS NASM20020 AIA/NAS NASM20022 AIA/NAS NASM20024 AIA/NAS NASM20033 AIA/NAS NASM20034 AIA/NAS NASM20035 AIA/NAS NASM20036

AIA/NAS NASM20037 AIA/NAS NASM20038 AIA/NAS NASM20039 AIA/NAS NASM20040 AIA/NAS NASM20042 AIA/NAS NASM20044 AIA/NAS NASM20045 AIA/NAS NASM20065 AIA/NAS NASM20066 AIA/NAS NASM20067 AIA/NAS NASM20068 AIA/NAS NASM20073 AIA/NAS NASM20074 AIA/NAS NASM20230 AIA/NAS NASM20392 AIA/NAS NASM20426 AIA/NAS NASM20427 AIA/NAS NASM20470 AIA/NAS NASM20501 AIA/NAS NASM20600 AIA/NAS NASM20601 AIA/NAS NASM20604

AIA/NAS NASM20605 AIA/NAS NASM20613 AIA/NAS NASM20615 AIA/NAS NASM20652 AIA/NAS NASM20652/1 AIA/NAS NASM20700 AIA/NAS NASM20995 AIA/NAS NASM21025 AIA/NAS NASM21042 AIA/NAS NASM21043 AIA/NAS NASM21044 AIA/NAS NASM21045 AIA/NAS NASM21046 AIA/NAS NASM21048 AIA/NAS NASM21049 AIA/NAS NASM21050 AIA/NAS NASM21051 AIA/NAS NASM21052 AIA/NAS NASM21053 AIA/NAS NASM21054 AIA/NAS NASM21055

AIA/NAS NASM21056 AIA/NAS NASM21057 AIA/NAS NASM21058 AIA/NAS NASM21059 AIA/NAS NASM21060 AIA/NAS NASM21061 AIA/NAS NASM21063 AIA/NAS NASM21064 AIA/NAS NASM21065 AIA/NAS NASM21066 AIA/NAS NASM21067 AIA/NAS NASM21068 AIA/NAS NASM21069 AIA/NAS NASM21070 AIA/NAS NASM21071 AIA/NAS NASM21072 AIA/NAS NASM21073 AIA/NAS NASM21074 AIA/NAS NASM21075 AIA/NAS NASM21076 AIA/NAS NASM21077 AIA/NAS NASM21078

AIA/NAS NASM21079 AIA/NAS NASM21080 AIA/NAS NASM21081 AIA/NAS NASM21082 AIA/NAS NASM21083 AIA/NAS NASM21084 AIA/NAS NASM21085 AIA/NAS NASM21086 AIA/NAS NASM21087 AIA/NAS NASM21093 AIA/NAS NASM21094 AIA/NAS NASM21095 AIA/NAS NASM21096 AIA/NAS NASM21097 AIA/NAS NASM21125 AIA/NAS NASM21130 AIA/NAS NASM21132 AIA/NAS NASM21133 AIA/NAS NASM21134 AIA/NAS NASM21140 AIA/NAS NASM21143

AIA/NAS NASM21143/1 AIA/NAS NASM21143/2 AIA/NAS NASM21207 AIA/NAS NASM21209 AIA/NAS NASM21224 AIA/NAS NASM21225 AIA/NAS NASM21244 AIA/NAS NASM21245 AIA/NAS NASM21250 AIA/NAS NASM21262 AIA/NAS NASM21266 AIA/NAS NASM21287 AIA/NAS NASM21295 AIA/NAS NASM21296 AIA/NAS NASM21297 AIA/NAS NASM21318 AIA/NAS NASM21322 AIA/NAS NASM21323 AIA/NAS NASM21325 AIA/NAS NASM21326 AIA/NAS NASM21327

AIA/NAS NASM21332 AIA/NAS NASM21333 AIA/NAS NASM21334 AIA/NAS NASM21392 AIA/NAS NASM21472 AIA/NAS NASM22529 AIA/NAS NASM22529/1 AIA/NAS NASM22529/2 AIA/NAS NASM22978 AIA/NAS NASM23460 AIA/NAS NASM23964 AIA/NAS NASM24066/2 AIA/NAS NASM24066/3 AIA/NAS NASM24066/4 AIA/NAS NASM24373 AIA/NAS NASM24374 AIA/NAS NASM24625 AIA/NAS NASM24627 AIA/NAS NASM24628

AIA/NAS NASM24629 AIA/NAS NASM24630 AIA/NAS NASM24634 AIA/NAS NASM24661 AIA/NAS NASM24665 AIA/NAS NASM24667 AIA/NAS NASM24671 AIA/NAS NASM24673 AIA/NAS NASM24674 AIA/NAS NASM24677 AIA/NAS NASM24678 AIA/NAS NASM24692 AIA/NAS NASM24693 AIA/NAS NASM24694 AIA/NAS NASM25027 AIA/NAS NASM25087 AIA/NAS NASM25420 AIA/NAS NASM25440 AIA/NAS NASM27039 AIA/NAS NASM27120 AIA/NAS NASM27384 AIA/NAS NASM27545

AIA/NAS NASM27576 AIA/NAS NASM27577 AIA/NAS NASM27953 AIA/NAS NASM27954 AIA/NAS NASM27975 AIA/NAS NASM27980 AIA/NAS NASM27981 AIA/NAS NASM27983 AIA/NAS NASM27984 AIA/NAS NASM27986 AIA/NAS NASM28042 AIA/NAS NASM33540 AIA/NAS NASM33547 AIA/NAS NASM33557 AIA/NAS NASM33588 AIA/NAS NASM33522 AIA/NAS NASM33602 AIA/NAS NASM33737 AIA/NAS NASM33749 AIA/NAS NASM33750 AIA/NAS NASM33781 AIA/NAS NASM35140

AIA/NAS NASM35190 AIA/NAS NASM35191 AIA/NAS NASM35198 AIA/NAS NASM35199 AIA/NAS NASM35202 AIA/NAS NASM35206 AIA/NAS NASM35207 AIA/NAS NASM35214 AIA/NAS NASM35215 AIA/NAS NASM35273 AIA/NAS NASM35274 AIA/NAS NASM35275 AIA/NAS NASM35276 AIA/NAS NASM35307 AIA/NAS NASM35308 AIA/NAS NASM35671 AIA/NAS NASM35672 AIA/NAS NASM35674 AIA/NAS NASM35675 AIA/NAS NASM35677 AIA/NAS NASM35678 AIA/NAS NASM35751

AIA/NAS NASM35756 AIA/NAS NASM35791 AIA/NAS NASM35792 AIA/NAS NASM35793 AIA/NAS NASM35812 AIA/NAS NASM39086 AIA/NAS NASM39087 AIA/NAS NASM43770/1 AIA/NAS NASM43770/2 AIA/NAS NASM43770/3 AIA/NAS NASM43770/4 AIA/NAS NASM43770/5 AIA/NAS NASM43770/6 AIA/NAS NASM43770/7 AIA/NAS NASM43770/8 AIA/NAS NASM43770/9 AIA/NAS NASM43770/1 0

AIA/NAS NASM43770/1 1 AIA/NAS NASM43770/1 2 AIA/NAS NASM43770/1 3 AIA/NAS NASM43770/1 4 AIA/NAS NASM45595 AIA/NAS NASM45595/1 AIA/NAS NASM45595/2 AIA/NAS NASM45595/3 AIA/NAS NASM45595/4 AIA/NAS NASM45595/5 AIA/NAS NASM45595/6 AIA/NAS NASM45595/7 AIA/NAS NASM45595/8 AIA/NAS NASM45908 AIA/NAS NASM45909 AIA/NAS NASM45915

AIA/NAS NASM45938 AIA/NAS NASM45938/2 AIA/NAS NASM45938/3 AIA/NAS NASM45938/4 AIA/NAS NASM45938/5 AIA/NAS NASM45938/6 AIA/NAS NASM45938/7 AIA/NAS NASM45938/8 AIA/NAS NASM45938/9 AIA/NAS NASM45938/1 0 AIA/NAS NASM45938/1 1 AIA/NAS NASM45938/1 2 AIA/NAS NASM45938/1 3 AIA/NAS NASM45938/1 4 AIA/NAS NASM47195

AIA/NAS NASM47196 AIA/NAS NASM51021 AIA/NAS NASM51023 AIA/NAS NASM51029 AIA/NAS NASM51031 AIA/NAS NASM51038 AIA/NAS NASM51045 AIA/NAS NASM51047 AIA/NAS NASM51096 AIA/NAS NASM51105 AIA/NAS NASM51109 AIA/NAS NASM51110 AIA/NAS NASM51400 AIA/NAS NAM51417 AIA/NAS NASM51417 AIA/NAS NASM51474 AIA/NAS NASM51575 AIA/NAS NASM51576 AIA/NAS NASM51833 AIA/NAS NASM51834 AIA/NAS NASM51838 AIA/NAS NASM51850

AIA/NAS NASM51863 AIA/NAS NASM51864 AIA/NAS NASM51871 AIA/NAS NASM51896 AIA/NAS NASM51923 AIA/NAS NASM51932 AIA/NAS NASM51956 AIA/NAS NASM51958 AIA/NAS NASM51959 AIA/NAS NASM51963 AIA/NAS NASM51964 AIA/NAS NASM51965 AIA/NAS NASM51966 AIA/NAS NASM51973 AIA/NAS NASM51974 AIA/NAS NASM51975 AIA/NAS NASM51976 AIA/NAS NASM51977 AIA/NAS NASM51981 AIA/NAS NASM51982 AIA/NAS NASM51987

AIA/NAS NASM63540/1 AIA/NAS NASM63540/2 AIA/NAS NASM63540/3 AIA/NAS NASM63540/4 AIA/NAS NASM63540/5 AIA/NAS NASM63540/7 AIA/NAS NASM81177 AIA/NAS NASM81177/1 AIA/NAS NASM81177/2 AIA/NAS NASM81177/3 AIA/NAS NASM82496 AIA/NAS NASM83050 AIA/NAS NASM83459 AIA/NAS NASM83459/1 AIA/NAS NASM83459/2 AIA/NAS NASM83459/3

AIA/NAS NASM85353 AIA/NAS NASM85353/1 AIA/NAS NASM85353/2 AIA/NAS NASM85449 AIA/NAS NASM85449/1 AIA/NAS NASM85449/2 AIA/NAS NASM85449/3 AIA/NAS NASM85449/4 AIA/NAS NASM85604 AIA/NAS NASM85643 AIA/NAS NASM85643/1 AIA/NAS NASM85643/2 AIA/NAS NASM85643/3 AIA/NAS NASM85643/4 AIA/NAS NASM85643/5 AIA/NAS NASM85730

AIA/NAS NASM85730/1 AIA/NAS NASM90353 AIA/NAS NASM90354 AIA/NAS NASM90415 AIA/NAS NASM90725 AIA/NAS NASM90726 AIA/NAS NASM122076 AIA/NAS NASM122077 AIA/NAS NASM122078 AIA/NAS NASM122079 AIA/NAS NASM122080 AIA/NAS NASM122081 AIA/NAS NASM122082 AIA/NAS NASM122083 AIA/NAS NASM122084 AIA/NAS NASM122085 AIA/NAS NASM122086 AIA/NAS NASM122087 AIA/NAS NASM122088 AIA/NAS NASM122089 AIA/NAS NASM122090

AIA/NAS NASM122091 AIA/NAS NASM122092 AIA/NAS NASM122093 AIA/NAS NASM122094 AIA/NAS NASM122095 AIA/NAS NASM122096 AIA/NAS NASM122097 AIA/NAS NASM122098 AIA/NAS NASM122099 AIA/NAS NASM122100 AIA/NAS NASM122101 AIA/NAS NASM122102 AIA/NAS NASM122103 AIA/NAS NASM122104 AIA/NAS NASM122105 AIA/NAS NASM122106 AIA/NAS NASM122107 AIA/NAS NASM122108 AIA/NAS NASM122109 AIA/NAS NASM122110 AIA/NAS NASM122111 AIA/NAS NASM122112

AIA/NAS NASM122113 AIA/NAS NASM122114 AIA/NAS NASM122115 AIA/NAS NASM122116 AIA/NAS NASM122117 AIA/NAS NASM122118 AIA/NAS NASM122119 AIA/NAS NASM122120 AIA/NAS NASM122121 AIA/NAS NASM122122 AIA/NAS NASM122123 AIA/NAS NASM122124 AIA/NAS NASM122125 AIA/NAS NASM122126 AIA/NAS NASM122127 AIA/NAS NASM122128 AIA/NAS NASM122129 AIA/NAS NASM122130 AIA/NAS NASM122131 AIA/NAS NASM122132 AIA/NAS NASM122133 AIA/NAS NASM122134

AIA/NAS NASM122135 AIA/NAS NASM122155 AIA/NAS NASM122156 AIA/NAS NASM122157 AIA/NAS NASM122158 AIA/NAS NASM122159 AIA/NAS NASM122160 AIA/NAS NASM122161 AIA/NAS NASM122162 AIA/NAS NASM122163 AIA/NAS NASM122164 AIA/NAS NASM122165 AIA/NAS NASM122166 AIA/NAS NASM122167 AIA/NAS NASM122168 AIA/NAS NASM122169 AIA/NAS NASM122170 AIA/NAS NASM122171 AIA/NAS NASM122172 AIA/NAS NASM122173 AIA/NAS NASM122174 AIA/NAS NASM122175

AIA/NAS NASM122195 AIA/NAS NASM122196 AIA/NAS NASM122197 AIA/NAS NASM122198 AIA/NAS NASM122199 AIA/NAS NASM122200 AIA/NAS NASM122201 AIA/NAS NASM122202 AIA/NAS NASM122203 AIA/NAS NASM122204 AIA/NAS NASM122205 AIA/NAS NASM122206 AIA/NAS NASM122207 AIA/NAS NASM122208 AIA/NAS NASM122209 AIA/NAS NASM122210 AIA/NAS NASM122211 AIA/NAS NASM122212 AIA/NAS NASM122213 AIA/NAS NASM122214 AIA/NAS NASM122215 AIA/NAS NASM122235

AIA/NAS NASM122236 AIA/NAS NASM122237 AIA/NAS NASM122238 AIA/NAS NASM122239 AIA/NAS NASM122240 AIA/NAS NASM122241 AIA/NAS NASM122242 AIA/NAS NASM122243 AIA/NAS NASM122244 AIA/NAS NASM122245 AIA/NAS NASM122246 AIA/NAS NASM122247 AIA/NAS NASM122248 AIA/NAS NASM122249 AIA/NAS NASM122250 AIA/NAS NASM122251 AIA/NAS NASM122252 AIA/NAS NASM122253 AIA/NAS NASM122254 AIA/NAS NASM122255 AIA/NAS NASM122256 AIA/NAS NASM122257

AIA/NAS NASM122258 AIA/NAS NASM122259 AIA/NAS NASM122260 AIA/NAS NASM122261 AIA/NAS NASM122262 AIA/NAS NASM122263 AIA/NAS NASM122264 AIA/NAS NASM122265 AIA/NAS NASM122266 AIA/NAS NASM122267 AIA/NAS NASM122268 AIA/NAS NASM122269 AIA/NAS NASM122270 AIA/NAS NASM122271 AIA/NAS NASM122272 AIA/NAS NASM122273 AIA/NAS NASM122274 AIA/NAS NASM122275 AIA/NAS NASM124651 AIA/NAS NASM124653 AIA/NAS NASM124654 AIA/NAS NASM124655

AIA/NAS NASM124656 AIA/NAS NASM124657 AIA/NAS NASM124658 AIA/NAS NASM124659 AIA/NAS NASM124660 AIA/NAS NASM124661 AIA/NAS NASM124662 AIA/NAS NASM124663 AIA/NAS NASM124664 AIA/NAS NASM124666 AIA/NAS NASM124667 AIA/NAS NASM124668 AIA/NAS NASM124669 AIA/NAS NASM124670 AIA/NAS NASM124671 AIA/NAS NASM124691 AIA/NAS NASM124693 AIA/NAS NASM124694 AIA/NAS NASM124695 AIA/NAS NASM124696 AIA/NAS NASM124697 AIA/NAS NASM124698

AIA/NAS NASM124699 AIA/NAS NASM124700 AIA/NAS NASM124701 AIA/NAS NASM124702 AIA/NAS NASM124703 AIA/NAS NASM124704 AIA/NAS NASM124706 AIA/NAS NASM124707 AIA/NAS NASM124708 AIA/NAS NASM124709 AIA/NAS NASM124710 AIA/NAS NASM124711 AIA/NAS NASM124731 AIA/NAS NASM124733 AIA/NAS NASM124734 AIA/NAS NASM124735 AIA/NAS NASM124736 AIA/NAS NASM124737 AIA/NAS NASM124738 AIA/NAS NASM124739 AIA/NAS NASM124740 AIA/NAS NASM124741

AIA/NAS NASM124742 AIA/NAS NASM124743 AIA/NAS NASM124746 AIA/NAS NASM124747 AIA/NAS NASM124748 AIA/NAS NASM124749 AIA/NAS NASM124750 AIA/NAS NASM124751 AIA/NAS NASM124771 AIA/NAS NASM124773 AIA/NAS NASM124774 AIA/NAS NASM124775 AIA/NAS NASM124776 AIA/NAS NASM124777 AIA/NAS NASM124778 AIA/NAS NASM124779 AIA/NAS NASM124780 AIA/NAS NASM124781 AIA/NAS NASM124782 AIA/NAS NASM124783 AIA/NAS NASM124784 AIA/NAS NASM124786

AIA/NAS NASM124787 AIA/NAS NASM124788 AIA/NAS NASM124789 AIA/NAS NASM124790 AIA/NAS NASM124791 AIA/NAS NASM124811 AIA/NAS NASM124812 AIA/NAS NASM124813 AIA/NAS NASM124814 AIA/NAS NASM124815 AIA/NAS NASM124816 AIA/NAS NASM124817 AIA/NAS NASM124818 AIA/NAS NASM124819 AIA/NAS NASM124820 AIA/NAS NASM124821 AIA/NAS NASM124822 AIA/NAS NASM124823 AIA/NAS NASM124824 AIA/NAS NASM124825 AIA/NAS NASM124826 AIA/NAS NASM124827

AIA/NAS NASM124828 AIA/NAS NASM124829 AIA/NAS NASM124830 AIA/NAS NASM124831 AIA/NAS NASM124832 AIA/NAS NASM124833 AIA/NAS NASM124834 AIA/NAS NASM124835 AIA/NAS NASM124836 AIA/NAS NASM124837 AIA/NAS NASM124838 AIA/NAS NASM124839 AIA/NAS NASM124840 AIA/NAS NASM124841 AIA/NAS NASM124842 AIA/NAS NASM124843 AIA/NAS NASM124844 AIA/NAS NASM124845 AIA/NAS NASM124846 AIA/NAS NASM124847 AIA/NAS NASM124848 AIA/NAS NASM124849

AIA/NAS NASM124850 AIA/NAS NASM171401 AIA/NAS NASM171402 AIA/NAS NASM171403 AIA/NAS NASM171404 AIA/NAS NASM171405 AIA/NAS NASM171406 AIA/NAS NASM171407 AIA/NAS NASM171408 AIA/NAS NASM171409 AIA/NAS NASM171410 AIA/NAS NASM171411 AIA/NAS NASM171412 AIA/NAS NASM171413 AIA/NAS NASM171414 AIA/NAS NASM171415 AIA/NAS NASM171416 AIA/NAS NASM171417 AIA/NAS NASM171418 AIA/NAS NASM171419 AIA/NAS NASM171420 AIA/NAS NASM171421

AIA/NAS NASM171422 AIA/NAS NASM171423 AIA/NAS NASM171424 AIA/NAS NASM171425 AIA/NAS NASM171426 AIA/NAS NASM171427 AIA/NAS NASM171428 AIA/NAS NASM171429 AIA/NAS NASM171430 AIA/NAS NASM171431 AIA/NAS NASM171432 AIA/NAS NASM171433 AIA/NAS NASM171434 AIA/NAS NASM171435 AIA/NAS NASM171436 AIA/NAS NASM171437 AIA/NAS NASM171438 AIA/NAS NASM171439 AIA/NAS NASM171440 AIA/NAS NASM171441 AIA/NAS NASM171442 AIA/NAS NASM171443

AIA/NAS NASM171444 AIA/NAS NASM171445 AIA/NAS NASM171446 AIA/NAS NASM171447 AIA/NAS NASM171448 AIA/NAS NASM171449 AIA/NAS NASM171450 AIA/NAS NASM171451 AIA/NAS NASM171452 AIA/NAS NASM171453 AIA/NAS NASM171454 AIA/NAS NASM171455 AIA/NAS NASM171456 AIA/NAS NASM171457 AIA/NAS NASM171458 AIA/NAS NASM171459 AIA/NAS NASM171460 AIA/NAS NASM171461 AIA/NAS NASM171462 AIA/NAS NASM171463 AIA/NAS NASM171464 AIA/NAS NASM171465

AIA/NAS NASM171466 AIA/NAS NASM171467 AIA/NAS NASM171468 AIA/NAS NASM171469 AIA/NAS NASM171470 AIA/NAS NASM171471 AIA/NAS NASM171472 AIA/NAS NASM171473 AIA/NAS NASM171474 AIA/NAS NASM171475 AIA/NAS NASM171476 AIA/NAS NASM171477 AIA/NAS NASM171478 AIA/NAS NASM171479 AIA/NAS NASM171480 AIA/NAS NASM171481 AIA/NAS NASM171482 AIA/NAS NASM171483 AIA/NAS NASM171484 AIA/NAS NASM171485 AIA/NAS NASM171486 AIA/NAS NASM171487

AIA/NAS NASM171488 AIA/NAS NASM171489 AIA/NAS NASM171490 AIA/NAS NASM171491 AIA/NAS NASM171492 AIA/NAS NASM171493 AIA/NAS NASM171494 AIA/NAS NASM171495 AIA/NAS NASM171496 AIA/NAS NASM171497 AIA/NAS NASM171498 AIA/NAS NASM171499 AIA/NAS NASM171500 AIA/NAS NASM171501 AIA/NAS NASM171502 AIA/NAS NASM171503 AIA/NAS NASM171504 AIA/NAS NASM171505 AIA/NAS NASM171506 AIA/NAS NASM171507 AIA/NAS NASM171508 AIA/NAS NASM171509

AIA/NAS NASM171510 AIA/NAS NASM171511 AIA/NAS NASM171512 AIA/NAS NASM171513 AIA/NAS NASM171514 AIA/NAS NASM171515 AIA/NAS NASM171516 AIA/NAS NASM171517 AIA/NAS NASM171518 AIA/NAS NASM171519 AIA/NAS NASM171520 AIA/NAS NASM171521 AIA/NAS NASM171522 AIA/NAS NASM171523 AIA/NAS NASM171524 AIA/NAS NASM171525 AIA/NAS NASM171526 AIA/NAS NASM171527 AIA/NAS NASM171528 AIA/NAS NASM171529 AIA/NAS NASM171530 AIA/NAS NASM171531

AIA/NAS NASM171532 AIA/NAS NASM171533 AIA/NAS NASM171534 AIA/NAS NASM171535 AIA/NAS NASM171536 AIA/NAS NASM171537 AIA/NAS NASM171538 AIA/NAS NASM171539 AIA/NAS NASM171540 AIA/NAS NASM171541 AIA/NAS NASM171542 AIA/NAS NASM171543 AIA/NAS NASM171544 AIA/NAS NASM171545 AIA/NAS NASM171546 AIA/NAS NASM171547 AIA/NAS NASM171548 AIA/NAS NASM171549 AIA/NAS NASM171550 AIA/NAS NASM171551 AIA/NAS NASM171552 AIA/NAS NASM171553

AIA/NAS NASM171554 AIA/NAS NASM171555 AIA/NAS NASM171556 AIA/NAS NASM171557 AIA/NAS NASM171558 AIA/NAS NASM171559 AIA/NAS NASM171560 AIA/NAS NASM171561 AIA/NAS NASM171562 AIA/NAS NASM171563 AIA/NAS NASM171564 AIA/NAS NASM171565 AIA/NAS NASM171566 AIA/NAS NASM171567 AIA/NAS NASM171568 AIA/NAS NASM171569 AIA/NAS NASM171570 AIA/NAS NASM171571 AIA/NAS NASM171572 AIA/NAS NASM171573 AIA/NAS NASM171574 AIA/NAS NASM171575

AIA/NAS NASM171576 AIA/NAS NASM171577 AIA/NAS NASM171578 AIA/NAS NASM171579 AIA/NAS NASM171580 AIA/NAS NASM171581 AIA/NAS NASM171582 AIA/NAS NASM171583 AIA/NAS NASM171584 AIA/NAS NASM171585 AIA/NAS NASM171586 AIA/NAS NASM171587 AIA/NAS NASM171588 AIA/NAS NASM171589 AIA/NAS NASM171590 AIA/NAS NASM171591 AIA/NAS NASM171592 AIA/NAS NASM171593 AIA/NAS NASM171594 AIA/NAS NASM171595 AIA/NAS NASM171596 AIA/NAS NASM171597

AIA/NAS NASM171598 AIA/NAS NASM171599 AIA/NAS NASM171600 AIA/NAS NASM171601 AIA/NAS NASM171602 AIA/NAS NASM171603 AIA/NAS NASM171604 AIA/NAS NASM171605 AIA/NAS NASM171606 AIA/NAS NASM171607 AIA/NAS NASM171608 AIA/NAS NASM171609 AIA/NAS NASM171610 AIA/NAS NASM171611 AIA/NAS NASM171612 AIA/NAS NASM171613 AIA/NAS NASM171614 AIA/NAS NASM171615 AIA/NAS NASM171616 AIA/NAS NASM171617 AIA/NAS NASM171618 AIA/NAS NASM171619

AIA/NAS NASM171620 AIA/NAS NASM171621 AIA/NAS NASM171622 AIA/NAS NASM171623 AIA/NAS NASM171624 AIA/NAS NASM171625 AIA/NAS NASM171626 AIA/NAS NASM171627 AIA/NAS NASM171628 AIA/NAS NASM171629 AIA/NAS NASM171630 AIA/NAS NASM171631 AIA/NAS NASM171632 AIA/NAS NASM171633 AIA/NAS NASM171634 AIA/NAS NASM171635 AIA/NAS NASM171636 AIA/NAS NASM171637 AIA/NAS NASM171638 AIA/NAS NASM171639 AIA/NAS NASM171640 AIA/NAS NASM171641

AIA/NAS NASM171642 AIA/NAS NASM171643 AIA/NAS NASM171644 AIA/NAS NASM171645 AIA/NAS NASM171646 AIA/NAS NASM171647 AIA/NAS NASM171648 AIA/NAS NASM171649 AIA/NAS NASM171650 AIA/NAS NASM171651 AIA/NAS NASM171652 AIA/NAS NASM171653 AIA/NAS NASM171654 AIA/NAS NASM171655 AIA/NAS NASM171656 AIA/NAS NASM171657 AIA/NAS NASM171658 AIA/NAS NASM171659 AIA/NAS NASM171660 AIA/NAS NASM171661 AIA/NAS NASM171662 AIA/NAS NASM171663

AIA/NAS NASM171664 AIA/NAS NASM171665 AIA/NAS NASM171666 AIA/NAS NASM171667 AIA/NAS NASM171668 AIA/NAS NASM171669 AIA/NAS NASM171670 AIA/NAS NASM171671 AIA/NAS NASM171672 AIA/NAS NASM171673 AIA/NAS NASM171674 AIA/NAS NASM171675 AIA/NAS NASM171676 AIA/NAS NASM171677 AIA/NAS NASM171678 AIA/NAS NASM171679 AIA/NAS NASM171680 AIA/NAS NASM171681 AIA/NAS NASM171682 AIA/NAS NASM171683 AIA/NAS NASM171684 AIA/NAS NASM171685

AIA/NAS NASM171686 AIA/NAS NASM171687 AIA/NAS NASM171688 AIA/NAS NASM171689 AIA/NAS NASM171690 AIA/NAS NASM171691 AIA/NAS NASM171692 AIA/NAS NASM171693 AIA/NAS NASM171694 AIA/NAS NASM171695 AIA/NAS NASM171696 AIA/NAS NASM171697 AIA/NAS NASM171698 AIA/NAS NASM171699 AIA/NAS NASM171700 AIA/NAS NASM171701 AIA/NAS NASM171702 AIA/NAS NASM171703 AIA/NAS NASM171704 AIA/NAS NASM171705 AIA/NAS NASM171706 AIA/NAS NASM171707

AIA/NAS NASM171708 AIA/NAS NASM171709 AIA/NAS NASM171710 AIA/NAS NASM171711 AIA/NAS NASM171712 AIA/NAS NASM171713 AIA/NAS NASM171714 AIA/NAS NASM171715 AIA/NAS NASM171716 AIA/NAS NASM171717 AIA/NAS NASM171718 AIA/NAS NASM171719 AIA/NAS NASM171720 AIA/NAS NASM171721 AIA/NAS NASM171722 AIA/NAS NASM171723 AIA/NAS NASM171724 AIA/NAS NASM171725 AIA/NAS NASM171726 AIA/NAS NASM171727 AIA/NAS NASM171728 AIA/NAS NASM171729

AIA/NAS NASM171730 AIA/NAS NASM171731 AIA/NAS NASM171732 AIA/NAS NASM171733 AIA/NAS NASM171734 AIA/NAS NASM171735 AIA/NAS NASM171736 AIA/NAS NASM171737 AIA/NAS NASM171738 AIA/NAS NASM171739 AIA/NAS NASM171740 AIA/NAS NASM171741 AIA/NAS NASM171742 AIA/NAS NASM171743 AIA/NAS NASM171744 AIA/NAS NASM171745 AIA/NAS NASM171746 AIA/NAS NASM171747 AIA/NAS NASM171748 AIA/NAS NASM171749 AIA/NAS NASM171750 AIA/NAS NASM171751

AIA/NAS NASM171752 AIA/NAS NASM171753 AIA/NAS NASM171754 AIA/NAS NASM171755 AIA/NAS NASM171756 AIA/NAS NASM171757 AIA/NAS NASM171758 AIA/NAS NASM171759 AIA/NAS NASM171760 AIA/NAS NASM171761 AIA/NAS NASM171762 AIA/NAS NASM171763 AIA/NAS NASM171764 AIA/NAS NASM171765 AIA/NAS NASM171766 AIA/NAS NASM171767 AIA/NAS NASM171768 AIA/NAS NASM171769 AIA/NAS NASM171770 AIA/NAS NASM171771 AIA/NAS NASM171772 AIA/NAS NASM171773

AIA/NAS NASM171774 AIA/NAS NASM171775 AIA/NAS NASM171776 AIA/NAS NASM171777 AIA/NAS NASM171778 AIA/NAS NASM171779 AIA/NAS NASM171780 AIA/NAS NASM171781 AIA/NAS NASM171782 AIA/NAS NASM171783 AIA/NAS NASM171784 AIA/NAS NASM171785 AIA/NAS NASM171786 AIA/NAS NASM171787 AIA/NAS NASM171788 AIA/NAS NASM171789 AIA/NAS NASM171790 AIA/NAS NASM171791 AIA/NAS NASM171792 AIA/NAS NASM171793 AIA/NAS NASM171794 AIA/NAS NASM171795

AIA/NAS NASM171796 AIA/NAS NASM171797 AIA/NAS NASM171798 AIA/NAS NASM171799 AIA/NAS NASM171800 AIA/NAS NASM171801 AIA/NAS NASM171802 AIA/NAS NASM171803 AIA/NAS NASM171804 AIA/NAS NASM171805 AIA/NAS NASM171806 AIA/NAS NASM171807 AIA/NAS NASM171808 AIA/NAS NASM171809 AIA/NAS NASM171810 AIA/NAS NASM171811 AIA/NAS NASM171812 AIA/NAS NASM171813 AIA/NAS NASM171814 AIA/NAS NASM171815 AIA/NAS NASM171816 AIA/NAS NASM171817

AIA/NAS NASM171818 AIA/NAS NASM171819 AIA/NAS NASM171820 AIA/NAS NASM171821 AIA/NAS NASM171822 AIA/NAS NASM171823 AIA/NAS NASM171824 AIA/NAS NASM171825 AIA/NAS NASM171826 AIA/NAS NASM171827 AIA/NAS NASM171828 AIA/NAS NASM171829 AIA/NAS NASM171830 AIA/NAS NASM171831 AIA/NAS NASM171832 AIA/NAS NASM171833 AIA/NAS NASM171834 AIA/NAS NASM171835 AIA/NAS NASM171836 AIA/NAS NASM171837 AIA/NAS NASM171838 AIA/NAS NASM171839

AIA/NAS NASM171840 AIA/NAS NASM171841 AIA/NAS NASM171842 AIA/NAS NASM171843 AIA/NAS NASM171844 AIA/NAS NASM171845 AIA/NAS NASM171846 AIA/NAS NASM171847 AIA/NAS NASM171848 AIA/NAS NASM171849 AIA/NAS NASM171850 AIA/NAS NASM171851 AIA/NAS NASM171852 AIA/NAS NASM171853 AIA/NAS NASM171854 AIA/NAS NASM171855 AIA/NAS NASM171856 AIA/NAS NASM171857 AIA/NAS NASM171858 AIA/NAS NASM171859 AIA/NAS NASM171860 AIA/NAS NASM171861

AIA/NAS NASM171862 AIA/NAS NASM171863 AIA/NAS NASM171864 AIA/NAS NASM171865 AIA/NAS NASM171866 AIA/NAS NASM171867 AIA/NAS NASM171868 AIA/NAS NASM171869 AIA/NAS NASM171870 AIA/NAS NASM171871 AIA/NAS NASM171872 AIA/NAS NASM171873 AIA/NAS NASM171874 AIA/NAS NASM171875 AIA/NAS NASM171876 AIA/NAS NASM171877 AIA/NAS NASM171878 AIA/NAS NASM171879 AIA/NAS NASM171880 AIA/NAS NASM171881 AIA/NAS NASM171882 AIA/NAS NASM171883

AIA/NAS NASM171884 AIA/NAS NASM171885 AIA/NAS NASM171886 AIA/NAS NASM171887 AIA/NAS NASM171888 AIA/NAS NASM171889 AIA/NAS NASM171890 AIA/NAS NASM171891 AIA/NAS NASM171892 AIA/NAS NASM171893 AIA/NAS NASM171894 AIA/NAS NASM171895 AIA/NAS NASM171896 AIA/NAS NASM171897 AIA/NAS NASM171898 AIA/NAS NASM171899 AIA/NAS NASM171900 AIAA S-017 AIAA R-024 AIAA R-100 AIIM MS1 AIIM TR2 AIIM TR4 AIIM MS23

AIIM MS24 AIIM MS26 AIIM MS32 AIIM MS34 AIIM MS43 AIIM MS46 AISC S303 AISC S329 AISC S335 AMCA 220 AMCA 302 AMCA 303 AMCA 501 AMCA 511 ANSI PH1.25 ANSI PH1.39 ANSI PH1.53 ANSI MH2.1 ANSI MH2.3 ANSI MH2.5 ANSI MH2.8 ANSI MH2.9 ANSI MH2.14 ANSI MH2.15 ANSI PH2.19 ANSI PH2.34 ANSI IT1.10 ANSI O1.1 ANSI S1.10

ANSI S1.12 ANSI MH3.1 ANSI MH3.3 ANSI MH3.4 ANSI X4.13 ANSI B11.2 ANSI N2.1 ANSI PH2.2 ANSI PH2.5 ANSI PH2.50 ANSI PH22.8 ANSI PH22.93 ANSI PH22.109 ANSI PH22.110 ANSI PH22.139 ANSI PH22.164 ANSI PH3.31 ANSI PH3.35 ANSI PH3.48 ANSI PH3.64 ANSI PH3.607 ANSI PH3.617 ANSI X3.11 ANSI X3.19 ANSI X3.34 ANSI X3.52 ANSI X3.53 ANSI X3.55 ANSI X3.58 ANSI X3.127

ANSI X3.203 ANSI X3.205 ANSI C37.11 ANSI C57.12.26 ANSI O5.1 ANSI C73A ANSI B7.1 ANSI Z79.2 ANSI Z79.3 ANSI Z79.14 ANSI Z80.1 ANSI Z8.1 ANSI C84.1 ANSI IT9.1 ANSI IT9.10 ANSI Z9.2 ANSI MH10.6M ANSI B11.1 ANSI B11.3 ANSI B11.5 ANSI B11.6 ANSI B11.8 ANSI B11.9 ANSI B11.10 ANSI B11.11 ANSI B11.13 ANSI B11.15 ANSI Z236.1

ANSI A14.2 ANSI C29.1 ANSI C29.2 ANSI C29.3 ANSI C29.4 ANSI C29.5 ANSI C29.8 ANSI Z34.1 ANSI Z34.2 ANSI C37.12 ANSI C37.44 ANSI C37.46 ANSI C37.47 ANSI C37.121 ANSI C39.1 ANSI C50.12 ANSI C50.13 ANSI C57.12.10 ANSI C57.12.13 ANSI C57.12.70 ANSI B71.1 ANSI C57.12.25 ANSI B74.2 ANSI B74.3 ANSI B74.12 ANSI B74.13 ANSI B74.18 ANSI C78.1 ANSI C78.1 ANSI C78.2

ANSI C78.2 ANSI C78.2A ANSI C78.2A ANSI C78.3 ANSI C78.3 ANSI C78.1341 ANSI C78.1342 ANSI C78.1404 ANSI C78.1408 ANSI C78.1409 ANSI C78.1410 ANSI C78.1414 ANSI C78.1415 ANSI C78.1416 ANSI C78.180 ANSI C80.5 ANSI C81.61 ANSI C81.61 ANSI C81.61G ANSI C81.61G ANSI C82.2 ANSI Z87.1 ANSI Z88.2 ANSI Z90.1 ANSI Z97.1 ANSI C119.1

ANSI Z129.1 ANSI C135.1 ANSI C135.30 ANSI C136.14 ANSI C136.20 ANSI C136.21 ANSI B173.1 ANSI B173.3 ANSI B173.8 ANSI B212.1 ANSI Z245.1 APA PRP-108 APA E30 APA F405 APA E445 API SPEC 12D API SPEC 5CT API SPEC 5D API SPEC 5L API SPEC 6D API MPMS 19.1 API STD 607 API PUBL 2015A API STD 526 API STD 527 API STD 594 API STD 598 API STD 599 API STD 600 API STD 609 API STD 610 API STD 614 API STD 617 API STD 618

API STD 619 API STD 650 API STD 672 API RP 1004 API STD 1104 API RP 1110 API STD 1529 API RP 1615 API STD 2000 API RP 2003 API PUBL 2015 API BULL 2516 API PUBL 2517D API STD 2551 API STD 2555 ARI 430 ARI 210/240 ARI 270 ARI 310/380 ARI 320 ARI 350 ARI 365 ARI 370 ARI 410 ARI 420 ARI 440 ARI 450 ARI 460 ARI 495 ARI 520 ARI 550/590 ARI 560 ARI 575 ARI 610 ARI 710 ARI 750 ARI 760

ARI 810 ARI 850 ARI 880 ASA S3.2 ASA S3.19 ASA S1.4 ASA S1.6 ASA S1.8 ASA S1.11 ASA S1.13 ASA S1.40 ASA S3.1 ASA S3.13 ASA S12.6 ASA S12.33 ASHRAE 15 ASHRAE 16 ASHRAE 17 ASHRAE 20 ASHRAE 23 ASHRAE 25 ASHRAE 29 ASHRAE 33 ASHRAE 37 ASHRAE 51 ASHRAE 52.1 ASHRAE 68 ASHRAE 90A ASHRAE 116 ASME SEC I ASME SEC I ADD ASME SEC I CODES

ASME SEC I FORMS/GUID ES ASME SEC I INDEX ASME SEC I INTRODUCTI ON ASME SEC I MA I ASME SEC I NMA A ASME SEC I PT PB ASME SEC I PT PEB ASME SEC I PT PFH ASME SEC I PT PFT ASME SEC I PT PG ASME SEC I PT PMB ASME SEC I PT PR ASME SEC I PT PVG ASME SEC I PT PW ASME SEC I PT PWT ASME SEC I SI UNITS ASME SEC IV ASME SEC IV ADD ASME SEC IV INDEX ASME SEC IV INTRODUCTI ON

ASME SEC IV NMA APP A ASME SEC IV NMA APP B ASME SEC IV NMA APP C ASME SEC IV NMA APP D ASME SEC IV NMA APP E ASME SEC IV NMA APP F ASME SEC IV NMA APP H ASME SEC IV NMA APP I ASME SEC IV NMA APP K ASME SEC IV NMA APP L ASME SEC IV PT HLW INTRO ASME SEC IV SI UNITS ASME B1.1 ASME B1.2 ASME B1.3M ASME B1.5 ASME B1.7M ASME B1.8 ASME B1.9 ASME B1.12 ASME B1.13M ASME B1.16M ASME B1.20.1 ASME B1.20.3 ASME B1.20.5 ASME B1.20.7

ASME B1.21M ASME B1.22M ASME CSD-1 ASME CSD-1 INTERPRETAT IONS ASME CSD-1A ASME MH1 ASME MH1.2.2M ASME MH1.8M ASME MH1A ASME QEI-1 ASME SEC IV MA APP 1 ASME SEC IV PT HC A-1 ASME SEC IV PT HF A-1 ASME SEC IV PT HG A-1 ASME SEC IV PT HLW A-1 ASME SEC VIII D1 INT VOL 42 ASME SEC VIII DIVISION 1 ASME B18.13A ASME HST-2 ASME SEC IV MA APP 2 ASME SEC IV PT HC A-2 ASME SEC IV PT HF A-2

ASME SEC IV PT HG A-2 ASME SEC IV PT HLW A-2 ASME PTC 25.3 ASME SEC IV MA APP 3 ASME SEC IV PT HC A-3 ASME SEC IV PT HF A-3 ASME SEC IV PT HG A-3 ASME SEC IV PT HLW A-3 ASME B4.1 ASME HST-4 ASME PTC 4 ASME SEC IV MA APP 4 ASME SEC IV PT HC A-4 ASME SEC IV PT HF-HW A-4 ASME SEC IV PT HG A-4 ASME SEC IV PT HLW A-4 ASME B56.1 INTERPRETAT IONS ASME B5.1M ASME B5.8 ASME B5.9 ASME B5.10 ASME B5.16 ASME B5.18 ASME B5.35 ASME B5.40

ASME B5.45 ASME B5.53M ASME B5.54 ASME HST-5 ASME SEC IV MA APP 5 ASME SEC IV PT HC A-5 ASME SEC IV PT HF-HW A-5 ASME SEC IV PT HG A-5 ASME SEC IV PT HLW A-5 ASME HST-6 ASME SEC IV PT HF-HW A-6 ASME SEC IV PT HG A-6 ASME SEC IV PT HLW A-6 ASME SEC IV PT HF-HW A-7 ASME SEC IV PT HG A-7 ASME SEC IV PT HLW A-7 ASME SEC IV PT HF-HW A-8 ASME SEC IV PT HLW A-8 ASME PTC 9 ASME SEC IV PT HF-HW A-9 ASME PTC 10

ASME SEC IV PT HF-HB A10 ASME Y10.11 ASME A112.19.3 ASME SEC IV PT HF-HB A11 ASME SEC IV PT HF-HB A12 ASME A13.1 ASME SEC IV PT HF-HB A13 ASME SEC IV PT HF-HB A14 ASME Y14.1 ASME Y14.1M ASME Y14.2M ASME Y14.3M ASME Y14.4M ASME Y14.5.1M ASME Y14.5M ASME Y14.6 ASME Y14.7.1 ASME Y14.7.2 ASME Y14.8M ASME Y14.13M ASME Y14.24 ASME Y14.32.1M

ASME Y14.34M ASME Y14.35M ASME Y14.36M ASME Y14.38 ASME Y14.100M ASME B15.1 ASME SEC IV PT HF-HB A15 ASME B16.1 ASME B16.3 ASME B16.4 ASME B16.4 INTERPRETAT IONS ASME B16.5 ASME B16.5 INTERPRETAT IONS ASME B16.5A ASME B16.9 ASME B16.9 INTERPRETAT IONS ASME B16.10 ASME B16.11 ASME B16.12 ASME B16.14 ASME B16.15 ASME B16.15 INTERPRETAT IONS ASME B16.18 ASME B16.20 ASME B16.20A ASME B16.21 ASME B16.22 ASME B16.22A

ASME B16.23 ASME B16.24 ASME B16.25 ASME B16.25 INTERPRETAT IONS ASME B16.26 ASME B16.29 ASME B16.33 ASME B16.34 ASME B16.34 INTERPRETAT IONS ASME B16.34A ASME B16.36 ASME B16.36 INTERPRETAT IONS ASME B16.38 ASME B16.39 ASME B16.40 ASME A17.1 ASME B17.1 ASME B17.2 ASME B18.1.1 ASME B18.1.2 ASME B18.1.3M ASME B18.2.1 ASME B18.2.1A ASME B18.2.2 ASME B18.2.3.1M ASME B18.2.3.2M ASME B18.2.3.3M ASME B18.2.3.4M

ASME B18.2.3.5M ASME B18.2.3.6M ASME B18.2.3.7M ASME B18.2.3.8M ASME B18.2.3.9M ASME B18.2.4.2M ASME B18.2.4.3M ASME B18.2.4.4M ASME B18.2.4.5M ASME B18.2.4.6M ASME B18.3 ASME B18.3.1M ASME B18.3.2M ASME B18.3.3M ASME B18.3.4M ASME B18.3.5M ASME B18.3.6M ASME B18.5 ASME B18.5.2.1M ASME B18.5.2.2M ASME B18.6.1 ASME B18.6.2 ASME B18.6.3 ASME B18.6.4 ASME B18.6.5M

ASME B18.6.7M ASME B18.7 ASME B18.7.1M ASME B18.8.1 ASME B18.9 ASME B18.10 ASME B18.11 ASME B18.12 ASME B18.13 ASME B18.13.1M ASME B18.15 ASME B18.16.1M ASME B18.16.2M ASME B18.16.3M ASME B18.18.1M ASME B18.18.2M ASME B18.18.2M SUPPLEMENT ASME B18.18.3M ASME B18.18.4M ASME B18.21.1 ASME B18.21.2M ASME B18.22.1 ASME B18.22M ASME B18.24.1 ASME B18.24.2

ASME B18.24.3 ASME PTC 19.5 ASME PTC 19.11 ASME PTC 23 ASME PTC 26 ASME B27.6 ASME B27.7 ASME B27.8M ASME B29.1M ASME B29.14M ASME B29.21M ASME B30.9 ASME B30.10 ASME B30.10 INTERPRETAT IONS ASME B30.11 ASME B30.11A ASME B30.16 ASME B30.16 INTERPRETAT IONS ASME B31.1 CASES NO. 25 ASME B31.1 CASES NO. 26 ASME B31.1 ASME B31.1 INTERPRETAT IONS ASME B31.1A ASME B31.1B ASME B31.3

ASME B31.3A ASME B31.4 ASME B31.5 ASME B31.8 ASME B31.9 ASME B31.9 INTERPRETAT IONS ASME B32.3M ASME B32.4M ASME B32.5 ASME B32.6M ASME Y32.4 ASME Y32.10 ASME B36.10M ASME SEC I INT VOL 42 ASME SEC IV INT VOL 42 ASME SEC I INT VOL 43 ASME SEC IV INT VOL 43 ASME SEC I INT VOL 44 ASME SEC IV INT VOL 44 ASME B46.1 ASME B47.1 ASME B56.1 ASME B56.11.3 ASME B56.11.4 ASME B73.1M ASME B89.3.1 ASME B94.2 ASME B94.6

ASME B94.19 ASME B94.51M ASME B94.54 ASME SEC I A98 ASME SEC IV A98 ASME SEC I A99 ASME SEC IV A99 ASME B107.1 ASME B107.2 ASME B107.4M ASME B107.5M ASME B107.6 ASME B107.8M ASME B107.10M ASME B107.11M ASME B107.14M ASME B107.15 ASME B107.16M ASME B107.17M ASME B107.19 ASME B107.20M ASME B107.21 ASME B107.23M ASME A112.6.1M

ASME A112.14.1 ASME A112.18.1 ASME A112.19.1M ASME A112.19.2M ASME A112.19.4M ASME A112.19.5 ASME A112.21.1M ASME A112.21.2M ASME A112.36.2M ASQ Z1.4 ASQ A8402 ASQ Q9000-1 ASQ Q9001 ASQ Q9002 ASQ Q9003 ASQ Q9004-1 ASSE/SAFE A14.3 ASSE/SAFE Z359.1 ASSE 1001 ASSE 1003 ASSE 1009 ASSE 1010 ASSE 1019 ASSE 1020 ASSE 1037 ASTM B1 ASTM E1 ASTM A3 ASTM B3 ASTM E4

ASTM A1 ASTM E10 ASTM E11 ASTM A2 ASTM B2 ASTM E23 ASTM C24 ASTM B26/B26M ASTM E30 ASTM E3 ASTM G38 ASTM C4 ASTM D4 ASTM A49 ASTM A53/A53M ASTM D56 ASTM C62 ASTM B5 ASTM C5 ASTM D5 ASTM A66 ASTM A6/A6M ASTM B6 ASTM D6 ASTM E6 ASTM C78 ASTM E7 ASTM G7 ASTM B8 ASTM E8 REV B ASTM E8M REV B ASTM B92/B92M ASTM E9 REV A

ASTM E97 ASTM SI 10 ASTM B105 ASTM B111M ASTM E122 ASTM E133 ASTM A135 ASTM E140 ASTM D143 ASTM F146 ASTM A148/A148M ASTM B152/B152M ASTM B172 ASTM B173 ASTM C208 ASTM C216 ASTM C12 ASTM D12 ASTM B232/B232M ASTM A234/A234M REV A ASTM A240/A240M ASTM D245 ASTM A269 ASTM A270 ASTM E270 ASTM A285/A285M ASTM D13 ASTM C14 ASTM C14M

ASTM E317 ASTM F373 ASTM E381 ASTM G15 REV B ASTM D391 ASTM D429 ASTM D445 ASTM B16/B16M ASTM D16 ASTM A473 ASTM A500 ASTM A501 ASTM A516/A516M ASTM D516 ASTM E519 ASTM C533 ASTM F543 ASTM E18 ASTM D562 ASTM C579 ASTM B19 ASTM B612 ASTM A615/A615M REV A ASTM A618 ASTM B618 ASTM D647 REV A ASTM C652 ASTM D664 ASTM D702 ASTM A20/A20M

ASTM C20 ASTM D20 ASTM E737 ASTM D750 ASTM A775/A775M REV B ASTM B21 ASTM B21M ASTM E21 ASTM D797 ASTM G21 ASTM A802/A802M ASTM D816 ASTM C840 ASTM D861 ASTM C862 ASTM E874 ASTM C920 ASTM B22 ASTM G22 ASTM F1040 ASTM E1077 ASTM E1155 ASTM D1248 REV A ASTM B23 ASTM D1531 ASTM D1547 ASTM C25 ASTM D1583 ASTM D25 ASTM D1610 ASTM E1695 ASTM D1743

ASTM D1744 ASTM D1761 ASTM D1783 ASTM D1876 ASTM E1925 ASTM A27/A27M ASTM C27 ASTM C28/C28M ASTM E28 ASTM G28 ASTM D2000 ASTM D2130 ASTM A29/A29M ASTM B29 ASTM C29/C29M ASTM D29 ASTM E29 REV A ASTM G29 ASTM D2277 ASTM B30 ASTM D2417 ASTM D2436 ASTM D2624 ASTM D2740 ASTM D2742 ASTM C31/C31M ASTM D2934 ASTM B32

ASTM C32 ASTM B33 ASTM C33 ASTM D3254 ASTM C34 ASTM D34 ASTM E34 ASTM G34 ASTM D3446 ASTM D3449 ASTM D3499 ASTM D3501 ASTM C35 ASTM D3550 ASTM A36/A36M REV A ASTM B36/B36M ASTM C36/C36M ASTM D36 ASTM F36 ASTM C37/C37M ASTM F37 ASTM F38 ASTM C39/C39M ASTM C40 ASTM D4308 ASTM D4339 ASTM D4562 ASTM D4632 ASTM D41 ASTM B42

ASTM C42/C42M ASTM B43 ASTM D43 ASTM D5449/D5449 M ASTM E45 ASTM A47/A47M ASTM G47 ASTM D6015 ASTM A48 REV A ASTM B49 ASTM C50 ASTM D50 ASTM E50 ASTM C51 ASTM E53 ASTM C55 ASTM E55 ASTM C56 ASTM C59/C59M ASTM B61 ASTM C61 ASTM C61/C61M ASTM B62 ASTM E62 ASTM B63 ASTM B66 ASTM A67 ASTM B67 REV A

ASTM C67 ASTM B68 ASTM B69 REV A ASTM D69 ASTM C70 ASTM D70 ASTM E70 ASTM D71 ASTM E72 ASTM C73 REV A ASTM A74 ASTM E74 REV A ASTM B75 ASTM B75M ASTM D75 ASTM E75 ASTM C76 ASTM C76M ASTM E76 ASTM E77 ASTM C79/C79M ASTM D79 ASTM A82 REV A ASTM D83 ASTM E83 ASTM E84 REV A ASTM G85 ASTM B86 ASTM D86 REV A ASTM F86 ASTM C87 ASTM B88 ASTM B88M ASTM C88 REV A ASTM D88

ASTM E88 ASTM A90/A90M REV A ASTM B90/B90M ASTM C90 ASTM E90 ASTM B91 ASTM C91 ASTM D91 ASTM C92 ASTM D92 REV A ASTM E92 ASTM B93/B93M ASTM D93 ASTM PS93 ASTM B94 ASTM C94/C94M ASTM D94 ASTM D95 ASTM B96/B96M ASTM E96 ASTM D97 REV A ASTM B98/B98M ASTM D98 ASTM B99/B99M ASTM C99 ASTM E100 ASTM B101 ASTM B103/B103M

ASTM E103 ASTM E104 ASTM F104 ASTM B107/B107M ASTM A108 ASTM B108 ASTM E108 ASTM A109/A109M ASTM C109/C109M ASTM C110 REV A ASTM E110 ASTM B111 ASTM E111 ASTM E112 ASTM C113 ASTM D113 ASTM E114 ASTM A116 ASTM D116 ASTM B117 ASTM C117 ASTM D117 ASTM C119 REV B ASTM E119 REV A ASTM F119 ASTM C120 ASTM D120 ASTM E120 ASTM A121 ASTM B121/B121M ASTM C121 ASTM B122/B122M

ASTM A123/A123M ASTM C123 ASTM D123 REV B ASTM B124/B124M ASTM A125 ASTM C125 REV A ASTM E125 ASTM A126 ASTM C126 ASTM D126 ASTM E126 ASTM B127 ASTM C127 ASTM D127 ASTM E127 ASTM A128/A128M ASTM C128 ASTM D128 ASTM C129 REV A ASTM D129 ASTM D130 ASTM A131/A131M ASTM C131 ASTM E132 ASTM C133 ASTM A134 ASTM B134 ASTM B135 ASTM B135M ASTM C135 ASTM B136

ASTM C136 REV A ASTM E136 ASTM B137 ASTM F137 ASTM B138 ASTM B138M ASTM C138 ASTM F138 ASTM A139 ASTM B139 ASTM B139M ASTM C139 ASTM E139 ASTM B140/B140M ASTM C140 ASTM D140 ASTM C141 ASTM C142 ASTM A143 ASTM C143/C143M ASTM C144 ASTM E145 ASTM D146 ASTM F147 ASTM B148 ASTM C148 ASTM C149 ASTM D149 REV A ASTM B150 ASTM B150M REV A ASTM C150

ASTM D150 ASTM F150 ASTM B151/B151M ASTM F152 ASTM A153/A153M ASTM B153 ASTM D153 ASTM B154 ASTM E154 ASTM E155 ASTM C156 ASTM D156 ASTM C157/C157M ASTM C158 ASTM A159 ASTM B159M REV A ASTM C159 ASTM B162 ASTM C162 ASTM E162 ASTM B163 REV A ASTM B164 ASTM E164 ASTM B165 ASTM C165 ASTM B166 ASTM A167 ASTM B167 ASTM C167 ASTM E167 ASTM B168 ASTM E168 ASTM B169

ASTM B169M ASTM C169 ASTM B170 ASTM C170 ASTM B171/B171M ASTM C171 REV A ASTM E171 ASTM C172 ASTM C173 REV A ASTM D173 REV B ASTM B174 ASTM C174/C174M ASTM E175 ASTM A176 ASTM B176 ASTM B177 ASTM C177 ASTM E177 REV A ASTM A178/A178M ASTM B179 ASTM A183 ASTM B183 ASTM C183 ASTM A184/A184M ASTM A185 ASTM C185 ASTM E186 ASTM B187 ASTM D187 ASTM B188 ASTM C188 ASTM B189

ASTM D189 ASTM E190 ASTM E191 ASTM A192/A192M ASTM C192/C192M ASTM E192 ASTM A193/A193M REV B ASTM E193 ASTM A194/A194M REV B ASTM C195 ASTM B196 REV A ASTM B196M ASTM C196 ASTM E196 ASTM A197/A197M ASTM B197/B197M ASTM B199 ASTM C199 ASTM B200 ASTM E200 ASTM B201 ASTM D202 ASTM E202 ASTM A203/A203M ASTM C203 ASTM E203 ASTM A204/A204M ASTM D204

ASTM B206/B206M ASTM C206 ASTM C207 ASTM B208 ASTM E208 REV A ASTM B209 ASTM B209M ASTM C209 ASTM D209 ASTM B210 ASTM B210M ASTM C210 ASTM B211 ASTM B211M REV A ASTM B212 ASTM C212 ASTM B213 ASTM A214/A214M ASTM B214 ASTM B215 ASTM C215 ASTM E215 ASTM A213/A213M REV A ASTM A216/A216M ASTM A217/A217M ASTM C217 ASTM D217 ASTM A220/A220M ASTM E220 ASTM B221

ASTM B221M ASTM E223 ASTM D224 ASTM E224 ASTM C225 ASTM D225 REV A ASTM C226 ASTM D226 REV A ASTM A227/A227M ASTM B227 ASTM C227 REV A ASTM D227 REV A ASTM E227 ASTM A228/A228M ASTM B228 ASTM E228 ASTM A229/A229M ASTM B229 ASTM D229 ASTM A230/A230M ASTM B230/B230M ASTM A231/A231M ASTM B231/B231M ASTM C231 ASTM A232/A232M ASTM C232 ASTM C233 ASTM D233

ASTM D235 ASTM B236 ASTM B236M ASTM C236 ASTM A239 ASTM B240 ASTM D240 ASTM B241/B241M ASTM C241 ASTM A242/A242M REV A ASTM D242 ASTM E243 ASTM B244 ASTM D244 ASTM B246 ASTM A247 ASTM B247 ASTM B247M ASTM B248 ASTM B248M ASTM E248 ASTM A249/A249M ASTM B249/B249M ASTM D249 ASTM B250 ASTM B250M ASTM B251 ASTM B251M

ASTM E251 ASTM A252 ASTM E252 ASTM B253 ASTM A254 ASTM B254 ASTM A255 ASTM D256 ASTM E256 ASTM D257 ASTM E257 ASTM B258 ASTM E258 ASTM C260 ASTM D260 ASTM D261 ASTM A262 ASTM A263 REV A ASTM B263 ASTM D263 ASTM E263 ASTM A264 REV A ASTM E264 ASTM A265 REV A ASTM B265 ASTM E265 ASTM C267 ASTM A268/A268M REV A ASTM D268 ASTM C270 ASTM B271 ASTM B272

ASTM C272 ASTM E272 ASTM C273 ASTM E273 ASTM A275/A275M ASTM B275 ASTM A276 REV A ASTM B276 ASTM D276 REV A ASTM A278 ASTM A278M ASTM D279 ASTM B280 ASTM D280 ASTM E280 ASTM B281 ASTM D281 ASTM C282 ASTM A283/A283M ASTM B283 REV A ASTM D283 ASTM E283 ASTM B286 ASTM C286 ASTM D287 ASTM E288 ASTM F288 ASTM C289 ASTM E290 REV A

ASTM E291 ASTM C293 ASTM C294 ASTM A295 ASTM C295 ASTM D295 ASTM C297 ASTM D297 ASTM B298 ASTM E300 ASTM B301/B301M ASTM C301 ASTM D301 ASTM A302/A302M ASTM B302 ASTM C302 ASTM C303 ASTM A304 ASTM D304 ASTM D305 ASTM B306 ASTM A307 ASTM C307 ASTM F307 ASTM A308 ASTM B308/B308M ASTM E308 ASTM A309 REV A ASTM C309 REV A ASTM E309 ASTM E310 ASTM F310 ASTM B311 ASTM C311

ASTM A312/A312M REV C ASTM D312 ASTM A313/A313M ASTM B313/B313M ASTM A314 ASTM B315 ASTM C315 ASTM B316/B316M ASTM B317 ASTM C317/C317M ASTM C318/C318M ASTM A320/A320M REV B ASTM F320 ASTM C321 ASTM A322 ASTM B322 ASTM D322 ASTM D323 REV A ASTM A325 ASTM A325M ASTM A327 ASTM A328/A328M ASTM B328 ASTM B329 ASTM D329 ASTM E329 REV B ASTM B330 ASTM C330

ASTM D330 ASTM E330 ASTM F330 ASTM A331 ASTM C331 ASTM D331 ASTM E331 ASTM C332 ASTM A333/A333M ASTM B333 ASTM E334 ASTM A335/A335M ASTM B335 ASTM C335 ASTM E335 ASTM A336/A336M ASTM C336 ASTM E336 ASTM B338 ASTM C338 ASTM E338 ASTM B339 ASTM E340 ASTM A341/A341M ASTM D341 ASTM A342/A342M ASTM B345/B345M ASTM D345 ASTM E345 ASTM E346 ASTM B348 ASTM D348 ASTM A350/A350M REV C

ASTM D350 ASTM E350 ASTM A351/A351M ASTM D351 ASTM E351 ASTM A352/A352M ASTM A354 REV A ASTM E354 ASTM B355 ASTM E355 ASTM C356 ASTM E357 ASTM D358 ASTM E358 ASTM B359 ASTM E359 ASTM B361 ASTM C361 ASTM C361M ASTM B363 ASTM C365 ASTM A366/A366M ASTM C366 ASTM F366 ASTM B367 ASTM B368 ASTM B369 ASTM D369 ASTM A370 REV A ASTM B370 ASTM B371 ASTM D371 ASTM B372

ASTM B373 ASTM D374 ASTM E376 ASTM A380 ASTM D380 ASTM D381 ASTM E384 ASTM A385 ASTM F386 ASTM A387/A387M ASTM D387 ASTM F387 ASTM A389/A389M ASTM C390 ASTM D390 ASTM E390 ASTM C393 ASTM A394 ASTM A395/A395M ASTM B395 ASTM B395M ASTM C395 ASTM D395 ASTM D396 ASTM B397 ASTM B399/B399M ASTM E399 ASTM A400 ASTM C401 ASTM F402 ASTM A403/A403M REV B ASTM B403

ASTM C403/C403M ASTM C404 ASTM F405 ASTM B406 ASTM E407 ASTM C408 ASTM D409 ASTM F409 REV A ASTM F410 ASTM A411 ASTM B411 ASTM C411 ASTM B412 ASTM C412 ASTM C412M ASTM D412 REV A ASTM F412 ASTM A413/A413M ASTM C413 ASTM D413 ASTM E413 ASTM C414 ASTM B415 ASTM B418 REV A ASTM C418 ASTM D420 ASTM A421/A421M REV A ASTM C421 ASTM D421 ASTM B422 ASTM D422 ASTM A423/A423M

ASTM C423 ASTM A424 ASTM B424 REV A ASTM E424 ASTM C425 ASTM C426 ASTM E426 ASTM B427 REV A ASTM A428/A428M ASTM B428 ASTM E428 ASTM B429 ASTM B430 ASTM D430 ASTM A434 REV A ASTM D434 ASTM A436 ASTM F436 ASTM F436M ASTM F437 ASTM A438 ASTM B438/B438M REV A ASTM E438 ASTM F438 ASTM A439 ASTM B439 ASTM F439 REV A ASTM B441

ASTM F441/F441M ASTM C442/C442M REV A ASTM F442/F442M ASTM B443 ASTM C443 ASTM C443M ASTM B444 ASTM C444 ASTM C444M ASTM D444 ASTM B446 ASTM D446 ASTM E446 ASTM F446 ASTM B447 ASTM D448 ASTM A449 ASTM B449 ASTM C449/C449M ASTM D449 ASTM E449 ASTM A450/A450M REV A ASTM D450 ASTM B452 ASTM A453/A453M ASTM B453 ASTM B453M ASTM D453 ASTM D454

ASTM B456 ASTM D456 ASTM E456 ASTM E458 ASTM F458 ASTM F459 ASTM D460 ASTM D461 ASTM A463/A463M ASTM B463 ASTM B465 ASTM D465 ASTM A466/A466M ASTM B466/B466M ASTM F467 ASTM F467M ASTM F468 ASTM F468M ASTM A470 ASTM C470/C470M ASTM D470 ASTM D471 ASTM B472 ASTM C472 ASTM D473 ASTM A475 ASTM C475 ASTM B476 ASTM C476 ASTM D476 ASTM F476 ASTM B477 ASTM F477 ASTM A478 ASTM C478

ASTM C478M ASTM D478 ASTM E478 REV A ASTM A479/A479M ASTM A480/A480M ASTM D480 ASTM F480 REV A ASTM C481 ASTM D482 REV A ASTM B483/B483M ASTM F483 ASTM A484/A484M ASTM F484 ASTM A485 ASTM A487/A487M ASTM B487 ASTM A488/A488M ASTM B488 ASTM E488 ASTM A489 ASTM A490 ASTM A490M ASTM D490 ASTM E490 REV A ASTM B491/B491M ASTM A492 ASTM A493 ASTM E493

ASTM F493 ASTM A494/A494M ASTM C494/C494M REV A ASTM E494 ASTM C495 REV A ASTM D495 ASTM A496 REV A ASTM C496 ASTM A497 ASTM C497 ASTM C497M ASTM C498 ASTM E498 ASTM A499 ASTM B499 ASTM C499 ASTM E499 ASTM B501 ASTM D501 ASTM F502 ASTM B504 ASTM A505 ASTM B505 ASTM A506 ASTM C506 ASTM C506M ASTM A507 ASTM C507 ASTM C507M ASTM A508/A508M

ASTM B508 ASTM C509 ASTM A510 ASTM A510M ASTM F510 ASTM A511 ASTM D511 ASTM A512 ASTM D512 ASTM A513 ASTM C513 ASTM A514/A514M REV A ASTM C514 ASTM E514 ASTM A515/A515M ASTM C516 ASTM A517/A517M ASTM D517 ASTM E517 ASTM A518/A518M ASTM C518 ASTM D518 ASTM E518 REV A ASTM A519 ASTM B520 ASTM C520 ASTM D520 ASTM B522 ASTM D522 REV A ASTM D523

ASTM D524 ASTM D525 ASTM F526 ASTM E527 ASTM A529/A529M ASTM D529 ASTM E529 ASTM A530/A530M ASTM B530 ASTM C531 ASTM D531 ASTM A532/A532M REV A ASTM A533/A533M ASTM A534 ASTM C534 ASTM C535 ASTM A536 ASTM E536 ASTM F536 ASTM A537/A537M ASTM E537 ASTM F537 ASTM B540 ASTM B541 ASTM F541 ASTM C542 ASTM D542 ASTM E542 ASTM B543 ASTM D543

ASTM E543 ASTM B545 ASTM D545 ASTM E545 ASTM D546 ASTM E546 ASTM B547/B547M ASTM C547 ASTM C549 ASTM C550 ASTM C552 ASTM F552 ASTM C553 ASTM A554 ASTM A555/A555M ASTM D555 ASTM B557 ASTM B557M ASTM C557 ASTM E557 ASTM D558 ASTM B559 ASTM D559 ASTM D560 ASTM F560 ASTM A561 ASTM C561 ASTM C562 ASTM A563 ASTM A563M ASTM B563 ASTM D563 ASTM A564/A564M ASTM B564 REV A

ASTM C564 ASTM D564 ASTM A565 ASTM B565 ASTM D565 ASTM B566 ASTM C566 ASTM D566 ASTM B567 ASTM C567 ASTM A568/A568M REV B ASTM B568 ASTM C568 ASTM F568 ASTM F568M ASTM A570/A570M ASTM C570 ASTM D570 ASTM E570 ASTM B571 ASTM D572 ASTM D573 ASTM A574 ASTM A574M ASTM B574 REV A ASTM A575 ASTM B575 REV A ASTM D575 ASTM A576 REV B ASTM E576 ASTM B577 ASTM E577 ASTM A578/A578M

ASTM B578 ASTM C578 ASTM D578 ASTM A579 ASTM B579 ASTM D579 ASTM A580/A580M ASTM B580 ASTM C580 ASTM E580 ASTM A581/A581M REV B ASTM C581 ASTM A582/A582M REV B ASTM C582 ASTM B584 ASTM D585 ASTM F585 ASTM A586 ASTM C586 ASTM C587 ASTM A588/A588M REV A ASTM C588/C588M ASTM A589 ASTM D590 ASTM A591/A591M ASTM B591 REV A ASTM C591

ASTM C592 ASTM B593 ASTM F593 ASTM B594 ASTM F594 ASTM A595 ASTM C595 REV A ASTM D595 ASTM E595 ASTM B596 ASTM E596 ASTM A597 ASTM B597 ASTM C597 ASTM B598 ASTM A600 REV A ASTM B600 ASTM D600 ASTM B601 REV A ASTM C602 REV A ASTM E602 ASTM A603 ASTM C603 ASTM A604 ASTM D604 ASTM E604 ASTM E605 ASTM A606 ASTM F606 ASTM F606M ASTM A607

ASTM B607 ASTM D607 ASTM E607 ASTM F607 ASTM A609/A609M ASTM B609/B609M ASTM D609 ASTM C610 ASTM D610 ASTM A611 ASTM D611 ASTM C612 REV A ASTM D612 ASTM C613/C613M ASTM D613 ASTM C615 ASTM C616 ASTM B617 ASTM C617 ASTM D617 ASTM C618 ASTM D618 ASTM E619 ASTM A620/A620M ASTM E621 ASTM A622/A622M ASTM D622 ASTM A623 ASTM A623M ASTM F623 ASTM A624/A624M ASTM B624

ASTM D624 ASTM A625/A625M ASTM A626/A626M ASTM A627 ASTM B628 ASTM C629 ASTM D629 ASTM A630 ASTM C630/C630M ASTM A633/A633M REV A ASTM C633 ASTM D633 ASTM A635/A635M ASTM C635 ASTM D635 ASTM C636 ASTM B637 ASTM C637 REV A ASTM C638 ASTM D638 ASTM D638M ASTM C639 ASTM B640 ASTM F640 ASTM A641/A641M ASTM C641 ASTM D642 ASTM B643 ASTM A644 ASTM B644 ASTM D644

ASTM B645 ASTM C645 ASTM B646 ASTM D646 ASTM D648 REV A ASTM E648 ASTM B650 ASTM C651 ASTM D653 ASTM C654 ASTM C654M ASTM C655 ASTM C655M ASTM C658 ASTM A659/A659M ASTM B660 ASTM D660 ASTM B661 ASTM C661 ASTM D661 ASTM D662 ASTM E662 ASTM A663/A663M ASTM B663 ASTM C663 ASTM C665 ASTM D665 ASTM E665 ASTM A666 ASTM B666/B666M ASTM C666 ASTM E666 ASTM A667/A667M

ASTM E667 ASTM A668/A668M ASTM E668 ASTM C669 ASTM B670 ASTM C670 ASTM F670 ASTM D671 ASTM E671 ASTM E672 ASTM A673/A673M ASTM A675/A675M REV A ASTM E675 ASTM C679 ASTM A681 ASTM F681 ASTM A682/A682M ASTM E682 ASTM F682 REV A ASTM B683 ASTM F683 ASTM A684/A684M ASTM B684 ASTM B685 ASTM C685/C685M REV A ASTM D685 ASTM A686 ASTM B687 ASTM B689 ASTM D689 REV A

ASTM A690/A690M REV A ASTM E691 ASTM D692 ASTM A693 ASTM D693 ASTM E694 ASTM A695 REV B ASTM B695 ASTM C695 ASTM D695 ASTM A696 REV A ASTM B696 ASTM D696 ASTM F696 ASTM D698 REV A ASTM A700 ASTM C700 ASTM A702 ASTM C702 ASTM A703/A703M ASTM D704 ASTM F704 ASTM A706/A706M ASTM D706 ASTM D707 ASTM F707/F707M ASTM F708 ASTM D709 ASTM E709 ASTM A710/A710M ASTM D710 ASTM A711

ASTM D711 ASTM E713 ASTM D714 ASTM A715 ASTM F718 ASTM C719 ASTM D720 ASTM E720 ASTM C721 ASTM D721 ASTM E721 ASTM F721 ASTM E722 ASTM D724 ASTM C725 ASTM C726 REV A ASTM D726 ASTM F726 ASTM C728 ASTM B731 ASTM C732 ASTM D732 ASTM E732 ASTM A733 ASTM B733 ASTM E736 ASTM F738 ASTM F738M ASTM A739 REV A ASTM C739 ASTM A740 ASTM B740 ASTM A742/A742M ASTM B742

ASTM A743/A743M REV A ASTM A744/A744M ASTM C744 ASTM F744M ASTM B745/B745M ASTM A746 ASTM B746/B746M ASTM D747 ASTM A749/A749M ASTM A751 ASTM D751 ASTM C754 ASTM A755/A755M ASTM E756 ASTM A757/A757M ASTM F758 ASTM A759 ASTM E759 ASTM A760/A760M ASTM E760 ASTM A761/A761M ASTM E761 ASTM A762/A762M ASTM B763 ASTM A764 ASTM C764 ASTM F765

ASTM B766 ASTM A767/A767M REV B ASTM A768 ASTM B768 ASTM A770/A770M ASTM B770 ASTM D772 ASTM F773M ASTM D774/D774M ASTM E774 ASTM C778 ASTM D779 ASTM A780 ASTM B780 ASTM C780 ASTM B782 ASTM F782 ASTM F783 ASTM D785 ASTM E785 ASTM A786/A786M REV B ASTM E786 ASTM D787 ASTM E787 ASTM A788 REV A ASTM B788/B788M ASTM D788 ASTM E788 ASTM F788/F788M ASTM D790

ASTM F791 ASTM A792/A792M ASTM C792 ASTM D792 ASTM A793 ASTM C793 ASTM A794 ASTM F794 ASTM C795 ASTM E795 ASTM A796/A796M ASTM C796 ASTM A798/A798M REV A ASTM C800 ASTM D800 ASTM E800 ASTM E801 ASTM F801 ASTM A805 ASTM C805 ASTM B806 REV A ASTM D808 ASTM A809 ASTM C811 ASTM E812 ASTM F812/F812M ASTM D813 ASTM E814 ASTM F814 REV B

ASTM C816 ASTM A818 ASTM C822 ASTM D822 ASTM E822 ASTM C823 ASTM D823 ASTM B824 ASTM E825 ASTM A827/A827M REV A ASTM C827 REV A ASTM C828 ASTM D828 ASTM A829/A829M ASTM D832 ASTM C834 ASTM E835/E835M ASTM F835 ASTM F835M ASTM C836 ASTM F836 ASTM F836M ASTM F837 ASTM F837M ASTM C841 ASTM F841 ASTM F842 ASTM C843 ASTM C844 ASTM F844 ASTM C847

ASTM D847 ASTM D848 ASTM A849 ASTM D849 ASTM D850 ASTM A853 ASTM D853 ASTM D854 ASTM F856 ASTM A857/A857M REV A ASTM F857 ASTM D858 ASTM F858 ASTM D859 ASTM E859 ASTM F859 ASTM C860 ASTM F860 ASTM A861 ASTM F861 ASTM C864 ASTM E864 ASTM C865 ASTM D865 ASTM E865 ASTM E866 ASTM D869 ASTM D871 ASTM F872 ASTM C873 ASTM D873 REV A

ASTM D874 ASTM D876 ASTM D877 ASTM D878 REV A ASTM F879 ASTM F879M ASTM A880 ASTM F880 ASTM F880M ASTM C881 ASTM C882 ASTM D882 ASTM F882 ASTM D883 ASTM E883 ASTM F883 ASTM A884/A884M ASTM C884/C884M ASTM D885 ASTM D888 ASTM C889 ASTM D891 ASTM D892 ASTM D893 ASTM F895 ASTM D896 ASTM D897 ASTM D898 ASTM D899 ASTM F899 ASTM C901 REV A ASTM D902 ASTM D903 ASTM D905

ASTM D906 ASTM F906 ASTM A907/A907M ASTM A908 ASTM D909 ASTM D910 ASTM E911 ASTM D912 ASTM F912 ASTM F912M ASTM C913 ASTM D914 ASTM C916 ASTM F917 ASTM D918 ASTM F918 ASTM F919 ASTM F920 ASTM C921 ASTM F921 ASTM D922 REV A ASTM C923 ASTM D923 ASTM C924 ASTM D924 ASTM F925 ASTM D926 ASTM D929 ASTM C930 ASTM E930 ASTM C931/C931M ASTM C932 REV A ASTM E934

ASTM C937 ASTM D937 ASTM D938 ASTM C939 ASTM F940 ASTM F941 ASTM C942 ASTM D942 ASTM D943 ASTM D945 ASTM D946 ASTM F949 ASTM D950 ASTM D951 ASTM C952 ASTM F952 ASTM D953 ASTM C954 ASTM D955 ASTM F957 ASTM F959M REV A ASTM C960/C960M ASTM F960 ASTM C964 ASTM F965 ASTM C966 ASTM A967 ASTM D968 ASTM C969 ASTM D969 ASTM E969 ASTM D971 REV A

ASTM D972 ASTM D974 ASTM D975 ASTM D976 ASTM C977 ASTM D977 ASTM D979 ASTM C989 ASTM E990 ASTM D991 ASTM F993 ASTM D994 ASTM C995 ASTM D995 REV B ASTM D996 ASTM D1000 ASTM F1000 ASTM E1001 REV A ASTM C1002 ASTM D1002 ASTM D1003 ASTM D1004 REV A ASTM E1004 ASTM D1005 ASTM D1006 ASTM D1013 ASTM D1014 ASTM F1014 ASTM C1015 ASTM C1017/C1017M ASTM C1018 ASTM D1018

ASTM C1019 REV B ASTM E1019 ASTM F1021 ASTM F1023 ASTM F1026 ASTM C1029 ASTM D1030 ASTM C1036 ASTM E1042 ASTM D1043 ASTM E1043 ASTM D1044 ASTM E1044 ASTM C1047 ASTM D1047 ASTM F1047 ASTM C1048 REV B ASTM D1048 ASTM D1049 ASTM D1050 ASTM D1052 ASTM C1053 ASTM D1053 REV A ASTM D1054 ASTM D1055 ASTM D1056 ASTM D1059 ASTM D1062 ASTM C1063 ASTM C1064/C1064M ASTM D1064 ASTM E1064

ASTM F1066 ASTM D1067 ASTM D1068 ASTM C1071 ASTM C1072 REV A ASTM D1073 ASTM D1075 ASTM D1076 ASTM C1077 ASTM D1078 ASTM F1078 ASTM F1079 ASTM F1083 ASTM D1084 ASTM C1089 ASTM D1091 ASTM E1091 ASTM D1092 ASTM D1093 ASTM D1094 ASTM E1094 ASTM E1095 ASTM E1098 ASTM E1099 ASTM C1107 ASTM C1116 ASTM D1117 ASTM D1119 ASTM E1119 ASTM D1120 ASTM D1121 ASTM D1122 REV A ASTM D1123 ASTM F1123 ASTM D1125 ASTM D1126 ASTM C1136 ASTM F1138 ASTM D1139

ASTM D1140 ASTM D1141 ASTM D1142 ASTM D1143 ASTM F1145 ASTM D1146 ASTM E1146 ASTM D1149 ASTM D1151 ASTM D1153 ASTM F1156 ASTM E1157 ASTM D1159 ASTM D1160 ASTM C1161 ASTM F1166 REV A ASTM D1169 ASTM D1171 ASTM D1172 ASTM D1176 ASTM D1177 ASTM D1179 ASTM E1182 ASTM F1182 ASTM D1183 ASTM D1184 ASTM D1185 REV A ASTM D1186 ASTM D1188 ASTM D1190 ASTM F1192 ASTM D1193 ASTM D1194 ASTM D1199 ASTM D1200

ASTM D1203 ASTM D1204 ASTM D1208 ASTM D1209 ASTM D1210 ASTM D1214 ASTM D1217 ASTM F1217 ASTM D1218 ASTM E1225 ASTM D1227 ASTM D1229 ASTM E1237 ASTM F1237 ASTM D1238 ASTM D1241 ASTM D1242 REV A ASTM F1242 ASTM D1246 ASTM E1249 ASTM D1250 ASTM D1250 VOL I ASTM D1250 VOL II ASTM D1250 VOL III ASTM D1250 VOL IV ASTM D1250 VOL V ASTM E1251 ASTM D1252 ASTM D1253 ASTM D1259 ASTM D1263

ASTM D1250 VOL VI ASTM D1250 VOL VII ASTM D1250 VOL VIII ASTM D1250 VOL IX ASTM D1264 ASTM E1264 ASTM D1266 ASTM F1267 ASTM D1272 ASTM D1275 REV A ASTM D1250 VOL X ASTM D1250 VOL XI/XII ASTM D1250 VOL XIII ASTM D1250 VOL XIV ASTM F1275 ASTM D1287 ASTM C1289 ASTM D1293 ASTM D1296 ASTM D1298 ASTM D1301 ASTM D1306 ASTM D1308 ASTM D1310 ASTM F1312 ASTM D1319 ASTM E1320 ASTM D1321 ASTM D1322

ASTM F1325 ASTM D1327 REV A ASTM D1330 ASTM F1332 ASTM D1335 ASTM D1338 ASTM D1343 ASTM F1344 ASTM F1347 ASTM D1348 ASTM D1349 ASTM D1353 ASTM F1360 ASTM D1363 ASTM D1364 ASTM D1366 ASTM D1369 ASTM F1370 ASTM D1385 ASTM D1386 ASTM D1388 ASTM E1392 ASTM D1394 ASTM D1397 ASTM D1398 ASTM D1400 ASTM D1401 ASTM D1403 ASTM D1405 ASTM D1414 ASTM D1415 ASTM E1417 ASTM D1418 ASTM D1423 ASTM D1424 ASTM D1426 ASTM D1430

ASTM D1435 ASTM E1441 ASTM E1444 REV A ASTM D1448 ASTM F1448 REV A ASTM D1452 ASTM D1456 ASTM E1456 ASTM D1458 ASTM D1461 ASTM D1475 ASTM D1476 ASTM D1478 ASTM D1483 ASTM D1488 ASTM D1489 ASTM D1493 ASTM D1494 ASTM D1499 ASTM D1500 ASTM D1505 ASTM D1506 ASTM D1509 ASTM D1510 ASTM D1512 ASTM D1513 REV A ASTM D1516 ASTM D1525 ASTM D1527 ASTM D1533 ASTM D1535 ASTM D1544 ASTM D1545 ASTM D1552 ASTM D1555 ASTM D1556 ASTM D1557 ASTM D1562

ASTM E1570 ASTM D1577 ASTM D1578 ASTM D1579 ASTM D1586 ASTM D1587 ASTM D1596 ASTM D1598 ASTM D1599 ASTM D1600 ASTM F1602 ASTM D1603 ASTM F1603 ASTM F1604 ASTM D1607 ASTM D1608 ASTM D1611 ASTM D1613 ASTM D1614 ASTM D1617 ASTM D1619 ASTM D1621 ASTM D1622 ASTM D1623 ASTM D1625 ASTM E1626 ASTM D1630 ASTM D1631 ASTM D1632 ASTM D1633 ASTM D1639 ASTM D1640 ASTM D1646 ASTM D1647 ASTM D1652 ASTM D1653

ASTM D1654 ASTM D1667 ASTM F1667 ASTM D1668 REV A ASTM E1672 ASTM D1675 ASTM D1687 ASTM D1688 ASTM D1691 ASTM D1693 ASTM F1700 ASTM D1708 ASTM D1709 ASTM D1710 ASTM D1718 ASTM D1719 ASTM D1720 ASTM D1722 ASTM D1726 ASTM D1729 ASTM D1730 ASTM D1732 ASTM D1734 ASTM D1735 ASTM D1740 ASTM D1742 ASTM E1742 ASTM D1746 ASTM D1747 ASTM D1748 ASTM D1751 ASTM D1752 ASTM D1763 ASTM D1765 ASTM D1776 ASTM D1779

ASTM D1780 ASTM D1781 ASTM F1783 ASTM D1784 REV A ASTM D1785 ASTM D1790 ASTM F1793 ASTM D1796 ASTM D1799 ASTM D1813 ASTM D1814 ASTM D1815 ASTM D1824 ASTM D1830 ASTM D1831 ASTM D1840 ASTM D1845 ASTM D1849 ASTM D1854 ASTM D1857 ASTM D1863 ASTM D1864 ASTM D1868 ASTM D1869 ASTM D1875 ASTM D1881 ASTM D1883 ASTM D1889 ASTM D1890 ASTM D1894 ASTM D1895 ASTM D1907 ASTM D1917 ASTM D1921 ASTM D1922 REV A ASTM D1928

ASTM D1929 ASTM D1932 ASTM D1943 ASTM D1950 ASTM D1951 ASTM D1952 ASTM D1954 ASTM D1957 ASTM D1959 ASTM D1960 ASTM D1962 ASTM D1963 ASTM D1964 ASTM D1965 ASTM D1968 REV A ASTM D1974 ASTM D1980 ASTM D1983 ASTM D2010/D2010 M ASTM D2013 REV A ASTM D2022 ASTM D2024 ASTM D2026 ASTM D2027 ASTM D2028 ASTM D2029 ASTM E2030 ASTM D2036 ASTM D2041 ASTM D2042 ASTM D2060 ASTM D2069

ASTM E2072 ASTM D2073 ASTM E2073 ASTM D2084 ASTM D2091 ASTM D2092 ASTM D2096 ASTM D2098 ASTM D2099 ASTM D2103 ASTM D2104 ASTM D2105 ASTM D2106 ASTM D2109 ASTM D2111 ASTM D2112 ASTM D2113 ASTM D2115 ASTM D2116 ASTM D2122 ASTM D2126 ASTM D2136 ASTM D2137 ASTM D2152 ASTM D2156 ASTM D2161 ASTM D2162 ASTM D2165 ASTM D2167 ASTM D2168 ASTM D2170 ASTM D2171

ASTM D2172 ASTM D2176 REV A ASTM D2178 REV A ASTM D2194 ASTM D2196 ASTM D2197 ASTM D2200 ASTM D2207 ASTM D2208 ASTM D2209 ASTM D2210 ASTM D2212 ASTM D2213 ASTM D2216 ASTM D2217 ASTM D2221 ASTM D2227 ASTM D2228 ASTM D2235 REV A ASTM D2239 ASTM D2240 ASTM D2241 ASTM D2243 ASTM D2244 ASTM D2245 ASTM D2247 ASTM D2256 ASTM D2257 ASTM D2258 ASTM D2265 ASTM D2266 ASTM D2268 ASTM D2270 ASTM D2272 ASTM D2273

ASTM D2274 ASTM D2276 ASTM D2282 ASTM D2287 ASTM D2290 ASTM D2291 ASTM D2303 ASTM D2310 ASTM D2321 ASTM D2322 ASTM D2330 ASTM D2343 ASTM D2344/D2344 M ASTM D2346 ASTM D2350 ASTM D2360 ASTM D2369 ASTM D2370 ASTM D2371 ASTM D2372 ASTM D2382 ASTM D2386 ASTM D2392 ASTM D2395 ASTM D2397 ASTM D2412 REV A ASTM D2414 REV A ASTM D2419 ASTM D2434 ASTM D2440 ASTM D2444

ASTM D2447 ASTM D2455 ASTM D2457 ASTM D2464 ASTM D2466 ASTM D2467 ASTM D2468 REV A ASTM D2471 ASTM D2472 ASTM D2481 ASTM D2486 ASTM D2487 ASTM D2488 ASTM D2492 ASTM D2500 ASTM D2503 ASTM D2510 ASTM D2511 ASTM D2512 ASTM D2513 ASTM D2517 ASTM D2519 ASTM D2520 ASTM D2532 ASTM D2533 ASTM D2556 REV A ASTM D2559 ASTM D2563 ASTM D2564 REV A ASTM D2565 ASTM D2572 ASTM D2573 ASTM D2579 ASTM D2580 ASTM D2582

ASTM D2583 ASTM D2584 ASTM D2595 ASTM D2596 ASTM D2603 ASTM D2609 ASTM D2617 ASTM D2622 ASTM D2625 ASTM D2626 REV B ASTM D2628 ASTM D2632 ASTM D2649 ASTM D2651 ASTM D2657 ASTM D2661 REV A ASTM D2662 REV A ASTM D2665 ASTM D2666 REV A ASTM D2667 ASTM D2670 ASTM D2671 ASTM D2672 REV A ASTM D2680 REV A ASTM D2683 ASTM D2686 ASTM D2697 ASTM D2698 ASTM D2699 ASTM D2700 ASTM D2702

ASTM D2709 ASTM D2714 ASTM D2724 ASTM D2726 ASTM D2729 REV A ASTM D2732 ASTM D2734 ASTM D2737 ASTM D2751 REV A ASTM D2766 ASTM D2774 ASTM D2794 ASTM D2800 ASTM D2802 ASTM D2803 ASTM D2804 ASTM D2805 REV A ASTM D2807 ASTM D2821 ASTM D2822 ASTM D2823 ASTM D2824 ASTM D2835 ASTM D2837 REV A ASTM D2842 ASTM D2843 ASTM D2846/D2846 M ASTM D2852 ASTM D2854 ASTM D2855 ASTM D2856

ASTM D2859 ASTM D2860/D2860 M ASTM D2862 ASTM D2863 ASTM D2867 ASTM D2868 ASTM D2880 ASTM D2885 ASTM D2887 ASTM D2896 ASTM D2905 ASTM D2922 ASTM D2935 ASTM D2937 ASTM D2939 ASTM D2940 ASTM D2941 ASTM D2942 ASTM D2949 ASTM D2950 ASTM D2983 ASTM D2989 ASTM D2990 ASTM D2992 ASTM D2995 ASTM D2996 ASTM D2997 ASTM D3000 REV A ASTM D3013 ASTM D3014 ASTM D3017

ASTM D3018 ASTM D3032 ASTM D3034 ASTM D3035 ASTM D3039/D3039 M ASTM D3045 ASTM D3056 ASTM D3061 ASTM D3064 ASTM D3065 ASTM D3069 ASTM D3070 ASTM D3078 ASTM D3090 ASTM D3091 ASTM D3092 ASTM D3097 ASTM D3120 ASTM D3122 ASTM D3137 ASTM D3138 ASTM D3139 ASTM D3145 ASTM D3147 ASTM D3159 ASTM D3161 REV A ASTM D3162 ASTM D3166 ASTM D3168 ASTM D3170 ASTM D3171 ASTM D3174 ASTM D3175 REV A ASTM D3177 ASTM D3182 ASTM D3183

ASTM D3186 ASTM D3212 REV A ASTM D3222 ASTM D3223 ASTM D3227 ASTM D3228 ASTM D3230 ASTM D3231 ASTM D3240 ASTM D3241 ASTM D3242 ASTM D3249 ASTM D3257 ASTM D3261 ASTM D3266 ASTM D3268 ASTM D3269 ASTM D3271 ASTM D3272 ASTM D3273 ASTM D3274 ASTM D3275 ASTM D3278 ASTM D3280 ASTM D3282 ASTM D3295 ASTM D3299 ASTM D3307 ASTM D3308

ASTM D3309 REV A ASTM D3320 ASTM D3329 ASTM D3330/D3330 M ASTM D3335 REV A ASTM D3336 ASTM D3337 ASTM D3338 ASTM D3343 ASTM D3363 ASTM D3368 ASTM D3369 ASTM D3370 REV A ASTM D3372 ASTM D3373 ASTM D3374 ASTM D3379 ASTM D3381 ASTM D3385 ASTM D3386 ASTM D3389 ASTM D3400 ASTM D3401 ASTM D3410/D3410 M ASTM D3417 ASTM D3418 ASTM D3432 ASTM D3441 ASTM D3443 ASTM D3447 REV A ASTM D3450

ASTM D3452 ASTM D3453 ASTM D3462 ASTM D3464 ASTM D3479/D3479 M ASTM D3482 ASTM D3487 ASTM D3492 ASTM D3495 ASTM D3500 ASTM D3505 ASTM D3511 REV A ASTM D3517 ASTM D3518/D3518 M ASTM D3529/D3529 M ASTM D3530/D3530 M ASTM D3531 ASTM D3532 ASTM D3539 ASTM D3544 ASTM D3545 ASTM D3551 ASTM D3552 ASTM D3553 ASTM D3559 ASTM D3567 ASTM D3574 ASTM D3575 ASTM D3577 ASTM D3578 REV A ASTM D3579

ASTM D3595 ASTM D3611 ASTM D3617 ASTM D3623 REV A ASTM D3624 REV A ASTM D3634 ASTM D3652/D3652 M ASTM D3654/D3654 M ASTM D3656 ASTM D3666 ASTM D3667 ASTM D3668 ASTM D3677 ASTM D3691 REV A ASTM D3699 ASTM D3701 REV A ASTM D3703 ASTM D3715/D3715 M ASTM D3718 REV A ASTM D3725 ASTM D3732 ASTM D3734 ASTM D3738 ASTM D3740 ASTM D3759/D3759 M ASTM D3761 ASTM D3767

ASTM D3772 ASTM D3773 ASTM D3774 ASTM D3775 ASTM D3776 ASTM D3790 ASTM D3792 ASTM D3800 ASTM D3811/D3811M ASTM D3813/D3813 M ASTM D3815/D3815 M ASTM D3828 ASTM D3832 ASTM D3833/D3833 M ASTM D3839 REV A ASTM D3841 ASTM D3846 ASTM D3850 ASTM D3878 ASTM D3887 ASTM D3892 ASTM D3909 REV B ASTM D3910 ASTM D3916 ASTM D3921 ASTM D3924 ASTM D3925 ASTM D3935 ASTM D3941 ASTM D3948 REV A

ASTM D3950 ASTM D3951 ASTM D3953 ASTM D3960 ASTM D3990 ASTM D4000 REV A ASTM D4004 ASTM D4006 ASTM D4017 REV A ASTM D4018 ASTM D4019 REV A ASTM D4020 REV A ASTM D4022 ASTM D4047 ASTM D4048 ASTM D4052 ASTM D4057 ASTM D4060 ASTM D4065 ASTM D4066 REV A ASTM D4067 ASTM D4075 ASTM D4080 ASTM D4083 ASTM D4092 ASTM D4097 REV A ASTM D4101 ASTM D4102 ASTM D4126 ASTM D4157

ASTM D4169 ASTM D4172 ASTM D4175 ASTM D4176 ASTM D4177 ASTM D4181 ASTM D4203 ASTM D4214 ASTM D4216 ASTM D4220 ASTM D4225 ASTM D4239 ASTM D4253 ASTM D4254 ASTM D4255/D4255 M ASTM D4263 ASTM D4268 ASTM D4287 ASTM D4289 ASTM D4294 ASTM D4300 REV A ASTM D4306 ASTM D4317 ASTM D4318 ASTM D4325 ASTM D4338 ASTM D4350 ASTM D4355 ASTM D4377 ASTM D4388 ASTM D4397 ASTM D4402

ASTM D4417 ASTM D4427 ASTM D4429 ASTM D4434 ASTM D4442 ASTM D4444 ASTM D4473 REV A ASTM D4479 ASTM D4491 REV A ASTM D4500 ASTM D4507 REV A ASTM D4530 ASTM D4533 ASTM D4549 ASTM D4586 ASTM D4601 ASTM D4615 ASTM D4617 ASTM D4624 ASTM D4625 ASTM D4628 ASTM D4629 ASTM D4634 ASTM D4636 ASTM D4637 ASTM D4643 ASTM D4653 ASTM D4655 ASTM D4673 ASTM D4675 ASTM D4683

ASTM D4684 ASTM D4689 ASTM D4690 ASTM D4701 ASTM D4704 ASTM D4705 ASTM D4727/D4727 M ASTM D4737 REV A ASTM D4741 ASTM D4745 ASTM D4749 ASTM D4751 REV A ASTM D4759 ASTM D4783 REV A ASTM D4786 ASTM D4791 ASTM D4801 ASTM D4802 ASTM D4807 ASTM D4808 ASTM D4809 ASTM D4814 REV A ASTM D4815 ASTM D4831 ASTM D4833 ASTM D4857 ASTM D4858

ASTM D4859 ASTM D4863 ASTM D4892 ASTM D4897 ASTM D4898 ASTM D4919 ASTM D4927 ASTM D4928 ASTM D4951 ASTM D4952 ASTM D4956 ASTM D4976 REV B ASTM D4985 REV A ASTM D5006 ASTM D5034 ASTM D5035 ASTM D5040 ASTM D5052/D5052 M ASTM D5053 ASTM D5059 ASTM D5104 ASTM D5105 ASTM D5118/D5118M ASTM D5119 ASTM D5151 ASTM D5168 ASTM D5185 ASTM D5191 ASTM D5204 ASTM D5205

ASTM D5213 ASTM D5229/D5229 M ASTM D5300 ASTM D5304 ASTM D5330/D5330 M ASTM D5436 ASTM D5445 REV A ASTM D5448/D5448 M ASTM D5450/D5450 M ASTM D5452 ASTM D5470 ASTM D5486/D5486 M REV A ASTM D5632 ASTM D5727 ASTM D5834 ASTM D5948 ASTM D5960 ASTM D6012 ASTM D6017 ASTM D6018 ASTM D6020 ASTM D6039/D6039 M ASTM D6075 ASTM D6076 ASTM D6107 ASTM D6116

ASTM D6183 ASTM D6193 ASTM D6199 ASTM D6576 AWS B2.1 AWS C1.1M/C1.1 AWS C1.3 AWS D1.1 AWS D1.2 AWS D1.3 AWS D1.4 AWS A5.21 AWS A2.4 AWS B2.2 AWS C2.16 AWS A3.0 AWS C3.2 AWS C3.4 AWS C3.5 AWS C3.6 AWS C3.7 AWS D3.6M AWS A4.2M/A4.2 AWS A4.3 AWS B4.0M AWS A5.1 AWS A5.01 AWS A5.2 AWS A5.3/A5.3M AWS A5.4 AWS A5.5 AWS A5.6 AWS A5.7 AWS A5.8 AWS A5.9 AWS A5.10/A5.10M AWS A5.11/A5.11M

AWS A5.12/A5.12M AWS A5.13 AWS A5.14/A5.14M AWS A5.15 AWS A5.16 AWS A5.17/A5.17M AWS A5.18/A5.18M AWS A5.19 AWS A5.20 AWS A5.22 AWS A5.23/A5.23M AWS A5.24 AWS A5.25/A5.25M AWS A5.26/A5.26M AWS A5.28 AWS A5.29 AWS A5.30 AWS C5.4 AWS C5.5 AWS D9.1M/D9.1 AWS D14.1 AWS D14.3/D14.3M AWS D14.6 AWS D15.1 AWS Z49.1 AWWA M16 AWWA M11 AWWA C205 AWWA C702 AWWA M23 AWWA D100 AWWA D102

AWWA C104/A21.4 AWWA C105/A21.5 AWWA C110/A21.10 AWWA C111/A21.11 AWWA C115/A21.15 AWWA C151/A21.51 AWWA C153/A21.53 AWWA C200 AWWA C203 AWWA C206 AWWA C207 AWWA C208 AWWA C209 AWWA C210 AWWA C213 AWWA C214 AWWA B300 AWWA C300 AWWA B301 AWWA C301 AWWA C302 AWWA C303 AWWA C400 AWWA C402 AWWA C403 AWWA C500 AWWA B502 AWWA C502 AWWA C503 AWWA C504 AWWA C508

AWWA C509 AWWA C510 AWWA C511 AWWA C550 AWWA C600 AWWA C603 AWWA C606 AWWA C651 AWWA C652 AWWA C700 AWWA C701 AWWA C703 AWWA C704 AWWA C800 AWWA C900 AWWA C901 BHMA A156.1 BHMA A156.2 BHMA A156.3 BHMA A156.4 BHMA A156.5 BHMA A156.6 BHMA A156.7 BHMA A156.8 BHMA A156.9 BHMA A156.10 BHMA A156.11 BHMA A156.12 BHMA A156.13 BHMA A156.14 BHMA A156.15 BHMA A156.16 BHMA A156.17 BHMA A156.18

BHMA A156.19 BHMA A156.20 BHMA A156.21 BHMA A156.23 BHMA A156.24 BOCA APPENDIX A NPC BOCA APPENDIX B NPC BOCA APPENDIX C NPC BOCA APPENDIX D NPC BOCA APPENDIX E NPC BOCA APPENDIX F NPC BOCA INDEX NPC BOCA ARTICLE 1 NPC BOCA ARTICLE 2 NPC BOCA ARTICLE 3 NPC BOCA ARTICLE 4 NPC

BOCA ARTICLE 5 NPC BOCA ARTICLE 6 NPC BOCA ARTICLE 7 NPC BOCA ARTICLE 8 NPC BOCA ARTICLE 9 NPC BOCA ARTICLE 10 NPC BOCA ARTICLE 11 NPC BOCA ARTICLE 12 NPC BOCA ARTICLE 13 NPC BOCA ARTICLE 14 NPC BOCA ARTICLE 15 NPC BOCA ARTICLE 16 NPC BOCA ARTICLE 17 NPC BOCA ARTICLE 18 NPC BOCA CONT NPC 1990

BOCA CONT NPC 1990 BOOK CAMI B7.7 CGSB 39-GP38A CI/CORDAGE 1201 CI/CORDAGE 1301 CI/CORDAGE 1302A CI/CORDAGE 1303 CI/CORDAGE 1304 CI/CORDAGE 1305 CI/CORDAGE 1306 CI/CORDAGE 1307 CI/CORDAGE 1308 CISPI 301 CSI MP-2-1 CSI MP-2-2 CSI MP-2-3 CTI ATC-105 DHI A115.7 EIA SSB-1-C EIA J-STD-006 EIA 455-83A EIA EIA/TIA455-29A EIA TIA/EIA455-171A EIA 557-1

EIA JESD78 EIA EIA-170 EIA 227-A EIA TIA/EIA232-F EIA 267-C EIA 274-D EIA 278-B EIA 297-A EIA 310-D EIA 343-A EIA 358-C EIA 359-A EIA 359-A-1 EIA 364-07B EIA 364-11A EIA 364-35A EIA 364-56A EIA EIA-36405B EIA EIA-36408B EIA EIA-36424B EIA EIA-36425C EIA EIA-36429B EIA EIA-36437B EIA EIA-36438B EIA EIA-36440B EIA EIA-36441C EIA EIA-36454A EIA EIA-36471A EIA EIA-36499

EIA EIA-364104A EIA EIA-364105 EIA 385 EIA 412-A EIA EIA-440-A EIA 455-34 EIA 455-65 EIA 455-174 EIA EIA-45521A EIA EIA-45523A EIA EIA-45526A EIA EIA-45533A EIA EIA-45588 EIA EIA-45591 EIA EIA-455179 EIA EIA/TIA455-3A EIA EIA/TIA455-6B EIA EIA/TIA455-14A EIA EIA/TIA455-15A EIA EIA/TIA455-22B EIA EIA/TIA455-24 EIA EIA/TIA455-30B EIA EIA/TIA455-37A EIA EIA/TIA455-42A

EIA EIA/TIA455-46A EIA EIA/TIA455-47B EIA EIA/TIA455-48B EIA EIA/TIA455-51A EIA EIA/TIA455-53A EIA EIA/TIA455-58A EIA EIA/TIA455-60A EIA EIA/TIA455-62A EIA EIA/TIA455-77 EIA EIA/TIA455-78A EIA EIA/TIA455-82B EIA EIA/TIA455-127 EIA EIA/TIA455-167A EIA EIA/TIA455-173 EIA EIA/TIA455-188 EIA RS-455-86 EIA TIA/EIA455-2C EIA TIA/EIA455-4B EIA TIA/EIA455-5B EIA TIA/EIA455-16A EIA TIA/EIA455-20A EIA TIA/EIA455-25B

EIA TIA/EIA455-28C EIA TIA/EIA455-31C EIA TIA/EIA455-32A EIA TIA/EIA455-39B EIA TIA/EIA455-41A EIA TIA/EIA455-43A EIA TIA/EIA455-44B EIA TIA/EIA455-50B EIA TIA/EIA455-54B EIA TIA/EIA455-55C EIA TIA/EIA455-56B EIA TIA/EIA455-57B EIA TIA/EIA455-58B EIA TIA/EIA455-67 EIA TIA/EIA455-75A EIA TIA/EIA455-76 EIA TIA/EIA455-80B EIA TIA/EIA455-81B EIA TIA/EIA455-84B EIA TIA/EIA455-87B EIA TIA/EIA455-100A EIA TIA/EIA455-104A

EIA TIA/EIA455-107A EIA TIA/EIA455-168A EIA TIA/EIA455-175A EIA TIA/EIA455-176 EIA TIA/EIA455-177A EIA TIA/EIA455-178A EIA TIA/EIA455-184 EIA 463-A EIA TIA/EIA465-A EIA TIA/EIA466-A EIA 469-C EIA TIA/EIA470-B EIA RS-478 EIA 483 EIA RS-487 EIA 494-B EIA 512 EIA 512-1 EIA 520A000A EIA 520AAAAA EIA 520AAABA EIA 520C000 EIA 520CA00A EIA 520CAAAA

EIA 520CAABA EIA 520CAACA EIA 520CAADA EIA TIA-5264A EIA TIA/EIA526-10 EIA TIA/EIA526-14A EIA 554-A EIA 557-A EIA 584 EIA 585 EIA TIA/EIA598-A EIA TIA/EIA604 EIA 649 EIA IEEE/EIA 12207.1 EIA IEEE/EIA 12207.2 EIA EIA5200000-D ICEA S-70-547 ICEA S-80-576 IEC 60086-1 IEC 60086-2 IEC 60774-1 IEC 60843-1 IEC 60843-3 IEC 61077 IEC 61105

IEEE 1 IEEE SI 10 IEEE C12.1 IEEE C12.4 IEEE C12.7 IEEE C12.11 IEEE 32 IEEE Y32.9 IEEE C37.09 IEEE C37.09A SUPP IEEE C37.09C SUPP IEEE C37.09E SUPP IEEE C37.09G SUPP IEEE C37.13 IEEE C37.20.1 IEEE C37.20.2 IEEE C37.20.3 IEEE C37.30 IEEE C37.90 IEEE C37.90.1 IEEE 43 IEEE 45 IEEE 48 IEEE C57.12.00 IEEE C57.12.01 IEEE C57.12.80 IEEE C57.12.90 IEEE C57.12.91 IEEE C57.13

IEEE C57.94 IEEE C62.1 IEEE C62.11 IEEE C62.41 IEEE C63.14 IEEE 81 IEEE 91 IEEE 91A IEEE C95.1 IEEE C95.3 IEEE 112 IEEE 145 IEEE 152 IEEE 176 IEEE 260.1 IEEE 280 IEEE 299 IEEE 315 IEEE 315A SUPP IEEE 383 IEEE 386 IEEE 400 IEEE 404 IEEE 421.1 IEEE 432 IEEE 455 IEEE 521 IEEE 602 IEEE 686

IEEE 945 IEEE 991 IEEE 1003.1 IEEE 1076 IEEE 12207.0 IEEE 12207.1 IEEE 12207.2 IPC J-STD-004 IPC J-STD-005 IPC J-STD-006 IPC FC-233A IPC TM-650 2.3.12 IPC T-50F IPC EG-140 IPC SG-141 IPC A-142 IPC QF-143 IPC FC-231C IPC FC-232C IPC FC-241C IPC D-322 IPC NC-349 IPC D-350D IPC D-356A IPC DW-425A IPC TM-650 IPC TM-650 MANUAL IPC TM-650 2.1.7 IPC TM-650 2.1.9

IPC TM-650 2.3.1.1 IPC TM-650 2.3.4.2 IPC TM-650 2.3.4.3 IPC TM-650 2.3.7.1 IPC TM-650 2.3.9 IPC TM-650 2.3.10 IPC TM-650 2.3.16 IPC TM-650 2.3.16.1 IPC TM-650 2.3.17 IPC TM-650 2.3.17.2 IPC TM-650 2.3.18 IPC TM-650 2.3.19 IPC TM-650 2.3.32 IPC TM-650 2.3.33 IPC TM-650 2.3.34 IPC TM-650 2.3.35 IPC TM-650 2.4.4 IPC TM-650 2.4.4.1 IPC TM-650 2.4.8 IPC TM-650 2.4.8.2 IPC TM-650 2.4.24 IPC TM-650 2.4.25

IPC TM-650 2.4.38 IPC TM-650 2.4.39 IPC TM-650 2.4.41 IPC TM-650 2.4.41.1 IPC TM-650 2.5.1 IPC TM-650 2.5.5.2 IPC TM-650 2.5.5.5 IPC TM-650 2.5.5.5.1 IPC TM-650 2.5.5.3 IPC TM-650 2.5.6 IPC TM-650 2.5.6.2 IPC TM-650 2.5.17.1 IPC TM-650 2.5.28 IPC TM-650 2.6.1 IPC TM-650 2.6.2.1 IPC TM-650 2.6.3 IPC TM-650 2.6.3.3 IPC TM-650 2.6.17 IPC QL-653A IPC SM-840C IPC 2221 IPC 2223 ISA MC96.1 ISO 5-4 ISO 46 ISO 54

ISO 594-1 ISO 594-2 ISO 668 ISO 830 ISO 1000 ISO 1122-1 ISO 1161 ISO 1224 ISO 1496-1 ISO 1496-2 ISO 1496-3 ISO 3290 ISO 3573 ISO 3574 ISO 3575 ISO 3861 ISO 4960 ISO 4995 ISO 4996 ISO 4997 ISO 4998 ISO 4999 ISO 5000 ISO 5001 ISO 5002 ISO 5950 ISO 5951 ISO 5952 ISO 5954

ISO 6316 ISO 6317 ISO 6328 ISO 6932 ISO 7886-1 ISO 8537 ISO 8879 ISO 9000 ISO 9000-2 ISO 9000-3 ISO 9000-4 ISO 9001 ISO 9004 ISO 9004-2 ISO 9004-3 ISO 9004-4 ISO 10005 ISO 10011-1 ISO 10011-2 ISO 10011-3 ISO 10012-1 ISO 11319 MSS SP-6 MSS SP-84 MSS SP-25 MSS SP-45 MSS SP-55

MSS SP-58 MSS SP-61 MSS SP-67 MSS SP-69 MSS SP-70 MSS SP-71 MSS SP-72 MSS SP-78 MSS SP-80 MSS SP-81 MSS SP-83 MSS SP-85 MSS SP-88 MSS SP-89 MSS SP-104 MSS SP-110 NCSL Z540-1 NEMA BU 1 NEMA EW 1 NEMA FU 1 NEMA KS 1 NEMA PB 1 NEMA DC 3 NEMA WC 7 NEMA MG 11 NEMA FB 1 NEMA ICS 1 NEMA LA 1 NEMA LI 1 NEMA MG 1 NEMA OS 1 NEMA RN 1 NEMA ST 1 NEMA TR 1 NEMA VE 1 NEMA WD 1 NEMA ICS 2 NEMA PB 2 NEMA PB 2.1

NEMA SG 2 NEMA TC 2 NEMA DC 3 NEMA HP 3 NEMA ICS 3 NEMA LD 3 NEMA LD 3.1 NEMA SG 3 NEMA TC 3 NEMA WC 3 NEMA HP 4 NEMA WC 66 NEMA WC 5 NEMA EW 6 NEMA TC 6 &8 NEMA WD 6 NEMA C78.390 NEMA MG 7 NEMA WC 8 NEMA TC 9 NEMA MG 10 NEMA C12.7 NEMA TC 13 NEMA TC 14 NEMA C18.1M NEMA ST 20 NEMA SM 23 NEMA WC 26 NEMA C29.2 NEMA C37.32 NEMA C37.121 NEMA WC 52

NEMA WC 56 NEMA WC 63.1 NEMA WC 63.2 NEMA C78.2B1 NEMA C78.2B2 NEMA C78.2C1 NEMA C78.2C2 NEMA C78.2D-1 NEMA C78.2D-2 NEMA C78.2E1 NEMA C78.2E2 NEMA C78.3A-1 NEMA C78.3A NEMA C78.40 NEMA C78.41 NEMA C80.1 NEMA C81.61A-1 NEMA C81.61A-2 NEMA C82.4 NEMA C135.7 NEMA 250 NEMA MW 1000 NEMA WC 27500 NFPA 10 NFPA 11 NFPA 12 NFPA 13

NFPA 14 NFPA 15 NFPA 16 NFPA 17 NFPA 17A NFPA 20 NFPA 24 NFPA 30 NFPA 30A NFPA 31 NFPA 32 NFPA 37 NFPA 50 NFPA 54 NFPA 58 NFPA 70 NFPA 70B NFPA 79 NFPA 80 NFPA 82 NFPA 86 NFPA 86D NFPA 90A NFPA 90B NFPA 91 NFPA 96 NFPA 99 NFPA 101 NFPA 102 NFPA 211 NFPA 214 NFPA 252 NFPA 255 NFPA 261

NFPA 325 NFPA 385 NFPA 407 NFPA 409 NFPA 412 NFPA 414 NFPA 701 NFPA 780 NFPA 1221 NFPA 1500 NFPA 1901 NFPA 1914 NFPA 1931 NFPA 1961 NFPA 1963 (NFPA) T2.7.2 (NFPA) T2.9.16 (NFPA) T3.9.18 R1 (NFPA) T2.6.1 R2 (NFPA) T2.12.1 (NFPA) T2.12.10 (NFPA) T2.13.4 (NFPA) T2.24.1 R1 (NFPA) T3.5.45 (NFPA) B93.30M (NFPA) B93.114M NSC A10.3 NSC A10.6 NSC Z41 NSF 1 NSF 7

NSF 2 NSF C-2 NSF 3 NSF 4 NSF 5 NSF 6 NSF 8E NSF 12 NSF 14 NSF 18A NSF 20 NSF 26 NSF 29 NSF 30 NSF 35 NSF 36 NSF 37 NSF 51 NSF 60 NSF 61 NWWDA I.S.1 NWWDA I.S.2 NWWDA I.S.4 NWWDA TM-5 NWWDA I.S.6 NWWDA TM-6 NWWDA TM-7 NWWDA TM-8 NWWDA TM-9 NWWDA TM10 PIMA IT3.604 RMA IP-7 RMA IP-20

RMA IP-22 RWMA BULL 16 SACMA SRM 1 SACMA SRM 2 SACMA SRM 3 SACMA SRM 4 SACMA SRM 5 SACMA SRM 17 SAE J 53 SAE J 10 SAE AS 115E SAE AS 116E SAE AS 117E SAE AS 118E SAE AS 119E SAE AS 120E SAE AS 153E SAE AS 154D SAE AS 155D SAE AS 156D SAE AS 157D SAE AS 158D SAE J 296 SAE J 366

SAE J 516 SAE J 517 SAE J 538 SAE J 598 SAE AS 621C SAE AS 622C SAE AS 623C SAE AS 624C SAE AS 625C SAE AS 626C SAE AS 627C SAE AS 628C SAE AS 629C SAE AS 630C SAE AS 631C SAE AS 632C SAE J 688 SAE J 690 SAE J 700 SAE J 20 SAE J 786A SAE J 848 SAE J 992 SAE J 1231 SAE ARP 1257A SAE J 1473 SAE ARP 1512A SAE ARP 24C SAE HIR 1622A SAE Z26.1 SAE J 1926 SAE AMS 2300H SAE MAM 2300B SAE AMS 2481G SAE J 30

SAE AMS 2680C SAE AMS 2814F SAE AMS 3054B SAE AMS 3216F SAE AMS 3598D SAE AMS 3755B SAE AMS 4064E SAE AMS 4125J SAE AMS 4140H SAE AMS 4182F SAE AMS 4215G SAE AMS 4229D SAE AMS 4313C SAE AMS 4625G SAE AMS 4930E SAE AMS 4944F SAE AMS 4967H SAE AMS 5046B SAE AMS 5047E SAE AMS 5069F SAE AMS 5221E SAE AMS 5336F

SAE AMS 5338E SAE AMS 5355G SAE AMS 5387C SAE AMS 5568F SAE AMS 5569A SAE AMS 5577H SAE AMS 5581D SAE AMS 5587E SAE AMS 6264J SAE AMS 6434E SAE AMS 6457C SAE AMS 6458H SAE AMS 6461J SAE AMS 7259D SAE AMS 7276G SAE AMS 7459C SAE AS 7479A SAE AMS 7730E SAE AMS 7913A SAE AMS-S7916A SAE AS 7949A SAE AS 9356B

SAE AS 150401 THRU AS 150425 SAE J 78 SAE J 81 SAE J 88 SAE J 89 SAE J 96 SAE J 98 SAE AMS-HHG-101 SAE J 110 SAE J 121 SAE J 121M SAE J 122 SAE J 123 SAE J 154 SAE J 159 SAE J 160 SAE J 163 SAE J 164 SAE J 180 SAE AMSSTD-182 SAE AMSSTD-183 SAE J 183 SAE AMSSTD-184 SAE J 184 SAE AMSSTD-185 SAE J 185 SAE J 198 SAE AMS-QQA-200A SAE AMS-QQA-200/1 SAE AMS-QQA-200/2 SAE AMS-QQA-200/3 SAE AMS-QQA-200/4A

SAE AMS-QQA-200/5 SAE AMS-QQA-200/6A SAE AMS-QQA-200/7A SAE AMS-QQA-200/8 SAE AMS-QQA-200/9 SAE AMS-QQA-200/10 SAE AMS-QQA-200/11 SAE AMS-QQA-200/13A SAE AMS-QQA-200/14 SAE AMS-QQA-200/15A SAE AMS-QQA-200/16 SAE AMS-QQA-200/17 SAE J 209 SAE J 211/1 SAE J 222 SAE AMS-QQA-225A SAE AMS-QQA-225/1A SAE AMS-QQA-225/2 SAE AMS-QQA-225/3 SAE AMS-QQA-225/4 SAE AMS-QQA-225/5 SAE AMS-QQA-225/6A SAE AMS-QQA-225/7

SAE AMS-QQA-225/8A SAE AMS-QQA-225/9 SAE AMS-QQA-225/10 SAE J 238 SAE J 246 SAE AMS-QQA-250 SAE AMS-QQA-250/1 SAE AMS-QQA-250/2 SAE AMS-QQA-250/3 SAE AMS-QQA-250/4A SAE AMS-QQA-250/5A SAE AMS-QQA-250/6 SAE AMS-QQA-250/7 SAE AMS-QQA-250/8A SAE AMS-QQA-250/9 SAE AMS-QQA-250/10 SAE AMS-QQA-250/11 SAE AMS-QQA-250/12 SAE AMS-QQA-250/13 SAE AMS-QQA-250/14 SAE AMS-QQA-250/15A SAE AMS-QQA-250/18 SAE AMS-QQA-250/19

SAE AMS-QQA-250/20 SAE AMS-QQA-250/21A SAE AMS-QQA-250/22A SAE AMS-QQA-250/24A SAE AMS-QQA-250/25A SAE AMS-QQA-250/26A SAE AMS-QQA-250/28A SAE AMS-QQA-250/29 SAE AMS-QQA-250/30 SAE J 267 SAE AS 269H SAE J 276 SAE AMS-QQN-290 SAE J 293 SAE J 297 SAE J 300 SAE J 318 SAE AMS-QQC-320 SAE J 321 SAE J 335 SAE J 336 SAE J 348 SAE J 350 SAE J 356 SAE J 360 SAE AMS-QQA-367 SAE J 369 SAE J 375 SAE J 376 SAE J 379

SAE J 380 SAE J 381 SAE J 382 SAE J 386 SAE AMSSTD-401 SAE J 403 SAE J 404 SAE J 423 SAE AMS-QQW-428 SAE J 429 SAE J 439A SAE J 441 SAE AS 478K SAE ARP 490E SAE ARP 492C SAE J 492 SAE J 506 SAE J 512 SAE J 513 SAE J 514 SAE J 518 SAE J 524 SAE J 525 SAE J 526 SAE J 530 SAE J 531 SAE J 532 SAE J 534 SAE J 537 SAE J 541 SAE J 553 SAE J 560 SAE J 561 SAE J 564 SAE J 565 SAE AS 568B SAE J 573

SAE J 575 SAE J 576 SAE J 578 SAE J 583 SAE ARP 584B SAE J 585 SAE J 586 SAE J 588 SAE J 589B SAE J 592 SAE J 593 SAE J 594 SAE J 595 SAE ARP 598B SAE ARP 603F SAE AS 604D SAE AS 611D SAE AS 614B SAE J 614 SAE J 636 SAE J 638 SAE J 645 SAE J 661 SAE J 663 SAE J 678 SAE J 680 SAE AS 681H SAE J 682 SAE AS 683B SAE J 683 SAE J 684 SAE AS 686A SAE J 689 SAE J 694

SAE J 695 SAE J 697 SAE AMS-QQS-700 SAE J 701 SAE J 702 SAE J 704 SAE J 706 SAE J 712 SAE J 726 SAE J 727 SAE J 732 SAE J 739 SAE J 740 SAE J 741 SAE ARP 743B SAE J 744 SAE J 753 SAE J 754A SAE AS 755C SAE J 759 SAE AMSSTD-753 SAE J 760 SAE AMS-QQS-763 SAE ARP 763 SAE J 765 SAE AS 782 SAE ARP 785A SAE AIR 797E SAE J 818 SAE J 820 SAE J 821 SAE J 833 SAE J 840 SAE J 843 SAE J 844 SAE J 845

SAE J 846 SAE J 847 SAE J 849 SAE J 858A SAE ARP 868B SAE AS 870D SAE AS 871A SAE J 872 SAE J 875 SAE ARP 891A SAE AS 896B SAE AS 897B SAE J 898/ISO 6682 SAE J 899 SAE J 903 SAE ARP 908C SAE J 910 SAE J 917 SAE J 919 SAE J 925 SAE J 928 SAE J 931 SAE AS 933B SAE J 942 SAE AMS-G952A SAE AS 954E SAE AS 959B SAE J 959 SAE J 964 SAE AS 970B SAE AS 971B SAE AS 972B SAE AS 976 SAE AS 977 SAE ARP 982C SAE J 985

SAE J 986 SAE J 987 SAE ARP 994 SAE J 994 SAE J 995 SAE AS 1001E SAE AS 1002E SAE AS 1003D SAE AS 1004D SAE AS 1005E SAE AS 1006D SAE AS 1007D SAE AS 1008E SAE AS 1009E SAE AS 1010D SAE J 1024 SAE J 1029 SAE AS 1031D SAE AS 1032D SAE AS 1033D SAE AS 1034D SAE AS 1035C SAE AS 1036E SAE AS 1037E SAE AS 1038D

SAE AS 1039D SAE AS 1040D SAE J 1040 SAE AS 1043F SAE J 1050 SAE J 1053 SAE AS 1055D SAE J 1063 SAE J 1065 SAE J 1067 SAE AS 1072E SAE J 1072 SAE AS 1073A SAE J 1074 SAE J 1082 SAE J 1086 SAE J 1097 SAE J 1128 SAE AS 1132F SAE J 1163 SAE J 1165 SAE J 1166 SAE ARP 1173 SAE J 1174 SAE AS 1177A SAE J 1177 SAE ARP 1179C SAE J 1180 SAE AS 1182B SAE ARP 1185B

SAE J 1193 SAE ARP 1199B SAE AS 1227B SAE AIR 1228 SAE J 1234 SAE J 1237 SAE AS 1241C SAE ARP 1247C SAE ARP 1256B SAE AS 1290A SAE AS 1291A SAE AS 1292 SAE J 1292 SAE AS 1293 SAE AS 1294 SAE AS 1295 SAE AS 1298 SAE AS 1299B SAE AS 1300A SAE AS 1301C SAE AS 1310B SAE ARP 1331B SAE AS 1339E SAE J 1349 SAE AIR 1351D SAE AIR 1362B SAE J 1362 SAE AS 1376D

SAE AIR 1377A SAE AMS 1379A SAE AMS 1380A SAE AMS 1382A SAE AMS 1383A SAE ARP 1383A SAE J 1383 SAE AMS 1384A SAE AMS 1385A SAE AMS 1386A SAE AMS 1387A SAE J 1401 SAE J 1402 SAE AIR 1419A SAE ARP 1420A SAE AMS 1424C SAE AMS 1426C SAE AMS 1428C SAE AMS 1431B SAE AMS 1435A SAE AMS 1453 SAE J 1453 SAE J 1472 SAE AMS 1476B

SAE J 1495 SAE J 1503 SAE J 1508 SAE MA 1520 SAE ARP 1524A SAE AMS 1526B SAE AMS 1534B SAE AMS 1535B SAE AMS 1537B SAE AMS 1538A SAE J 1545 SAE AMS 1547 SAE MA 1547A SAE J 1559 SAE MA 1565A SAE MA 1566A SAE MA 1567B SAE MA 1568 SAE MA 1573 SAE ARP 1575A SAE AMS 1625B SAE AMS 1626B SAE AMS 1631B SAE ARP 1658B

SAE ARP 1675 SAE J 1703 SAE AS 1708C SAE AS 1711B SAE AS 1712B SAE AS 1713B SAE AS 1714C SAE AS 1715C SAE AS 1716C SAE AS 1717C SAE AS 1718C SAE AS 1719B SAE AS 1720B SAE MAP 1753 SAE J 1775/ HIR 1559A SAE J 1776/ HIR 1514A SAE J 1777/ HIR 1063B SAE J 1780/ HRP 4382 SAE J 1781/ HIR 1694 SAE J 1782 SAE J 1783/ HRP 4538 SAE J 1784/ HIR 4544 SAE MA 1784

SAE AS 1790G SAE AS 1791B SAE AS 1792D SAE ARP 1801 SAE MA 1806 SAE AS 1814B SAE ARP 1820A SAE AS 1895C SAE AS 1895/1D SAE AS 1895/2C SAE AS 1895/3C SAE AS 1895/4C SAE AS 1895/5C SAE AS 1895/6C SAE AS 1895/7C SAE AS 1895/8C SAE AS 1895/9C SAE AS 1895/10C SAE AS 1895/11C SAE AS 1895/12C SAE AS 1895/13C SAE AS 1895/14C

SAE AS 1895/15D SAE AS 1895/16A SAE AS 1895/17A SAE AS 1895/18A SAE AS 1895/19A SAE AS 1895/20A SAE AS 1895/21A SAE AS 1895/22A SAE J 1899 SAE ARP 1902 SAE AS 1909B SAE AS 1910B SAE AS 1911B SAE AS 1912B SAE AS 1913B SAE AS 1914B SAE ARP 1923 SAE J 1926/1 SAE J 1926/2 SAE J 1926/3 SAE ARP 1927 SAE AS 1933A SAE MA 1937

SAE MA 1943A SAE AS 1946A SAE AS 1946SUP1 SAE ARP 1947A SAE AS 1960 SAE AS 1960/1A SAE AS 1960/2 SAE AS 1960/3 SAE AS 1960/4 SAE AS 1960/5 SAE J 1966 SAE ARP 1967A SAE ARP 1972 SAE AS 1986B SAE AS 1990B SAE MA 2007 SAE MA 2010 SAE MA 2012B SAE J 2014 SAE MA 2025A SAE MA 2035A SAE MA 2036A SAE MA 2037A SAE MA 2038A

SAE MA 2039A SAE MA 2040B SAE MA 2043A SAE MA 2046A SAE MA 2047C SAE MA 2058A SAE AS 2078 SAE MA 2080 SAE MA 2081 SAE MA 2082 SAE MA 2083 SAE MA 2084 SAE MA 2085 SAE MA 2086 SAE MA 2087 SAE MA 2088 SAE MA 2089 SAE MA 2090 SAE MA 2091 SAE MA 2093 SAE MA 2100 SAE MA 2101 SAE MA 2102 SAE MA 2103 SAE MA 2104 SAE MA 2105

SAE MA 2106A SAE MA 2150 SAE MA 2150/1 SAE MA 2150/2 SAE MA 2150/4 SAE MA 2150/5 SAE MA 2150/6 SAE MA 2150/7 SAE MA 2151 SAE MA 2151/1 SAE MA 2151/2 SAE MA 2151/3 SAE MA 2152/1 SAE MA 2152/2 SAE MA 2153/1 SAE MA 2153/2 SAE MA 2154/1 SAE MA 2154/2 SAE MA 2154/3 SAE MA 2155/1 SAE MA 2155/2 SAE MA 2155/3 SAE MA 2155/4

SAE MA 2155/5 SAE MA 2156/1 SAE MA 2156/2 SAE MA 2156/3 SAE J 2162 SAE MA 2170 SAE MA 2171 SAE MA 2172 SAE AMSSTD-2175 SAE MA 2176A SAE MA 2177A SAE MA 2178A SAE AMSSTD-2219 SAE AMS 2241M SAE MAM 2241C SAE AMS 2242F SAE MAM 2242A SAE AMS 2243G SAE MAM 2243B SAE J 2244/1 SAE AMS 2248E SAE AMS 2249E

SAE AMS 2251G SAE MAM 2251A SAE AMS 2252D SAE MAM 2252A SAE AMS 2253E SAE MAM 2253 SAE AMS 2259C SAE AMS 2262F SAE AMS 2269E SAE J 2270 SAE J 2295 SAE AMS 2301H SAE AMS 2303D SAE MAM 2303B SAE AMS 2310E SAE AMS 2315E SAE J 2333 SAE AMS 2360C SAE AMS 2361C SAE AMS 2362A SAE J 2362 SAE J 2363 SAE AMS 2368 SAE AMS 2370G

SAE AMS 2371F SAE AMS 2375C SAE AMS 2400U SAE AMS 2401E SAE AMS 2404D SAE AMS 2406J SAE AMS 2409G SAE AMS 2410H SAE AMS 2411E SAE AMS 2412G SAE AMS 2413D SAE AMS 2415G SAE AMS 2416H SAE AMS 2417F SAE AMS 2418F SAE AMS 2420C SAE AMS 2424D SAE AMS 2425E SAE AMS 2430L SAE AMS 2433B SAE AMS 2434B SAE AMS 2435F

SAE AMS 2436C SAE AMS 2465B SAE AMS 2469F SAE AMS 2470L SAE AMS 2471E SAE AMS 2472E SAE AMS 2475F SAE AMS 2485H SAE AMS 2486B SAE AMS 2491D SAE AMS 2515E SAE MA 2515 SAE AMS 2516D SAE AMS 2518A SAE MA 2520 SAE MA 2521 SAE AMS 2535A SAE MA 2536 SAE MA 2537 SAE AMS 2601F SAE AMS 2602D SAE AMS 2604F SAE AMS 2605D SAE AMS 2606E

SAE AMS 2607D SAE AMS 2616D SAE AMS 2620D SAE AMS 2625D SAE AMS 2629B SAE AMS 2630B SAE AMS 2631B SAE AMS 2632A SAE AMS 2633B SAE AMS 2634B SAE AMS 2643B SAE AMS 2644A SAE AMS 2658A SAE AMS 2672F SAE AMS 2681B SAE AMS 2750C SAE AMS 2755D SAE AMS 2759C SAE AMS 2759/6 SAE AMS 2759/7 SAE AMS 2762A SAE AMS 2770E

SAE AMS 2800C SAE AMS 2801A SAE AMS 2804C SAE AMS 2808D SAE AMS 2810F SAE AMS 2813F SAE AMS 2816V SAE AMS 2817E SAE AMS 2825A SAE AMS 3021C SAE AMS 3025B SAE AMS 3040B SAE AMS 3041C SAE AMS 3042C SAE AMS 3043B SAE AMS 3044D SAE AMS 3045C SAE AMS 3046D SAE AMS 3055A SAE AMS 3056B SAE AS 3062C SAE AS 3066

SAE AS 3067B SAE AS 3068A SAE AS 3069 SAE AS 3070 SAE AS 3071B SAE AS 3080 SAE AS 3081 SAE AS 3082 SAE AS 3083 SAE AS 3086 SAE AS 3087 SAE AS 3088 SAE AS 3089 SAE AS 3090 SAE AS 3091 SAE AS 3092 SAE AS 3093 SAE AS 3094 SAE AS 3095 SAE AS 3096 SAE AS 3097 SAE AS 3098 SAE AMS 3100A SAE AS 3106 SAE AMS 3107A SAE AMS 3107/1A SAE AMS 3107/2A SAE AMS 3107/3A SAE AMS 3107/4A SAE AS 3121 SAE AS 3122 SAE AS 3123 SAE AS 3124 SAE AS 3125

SAE AS 3126 SAE AS 3127 SAE AS 3128 SAE AS 3129 SAE AS 3130 SAE AS 3131 SAE AS 3132 SAE AMS 3135D SAE AMS 3136E SAE AMS 3138C SAE AMS 3138/1B SAE AMS 3138/2B SAE AMS 3138/4B SAE AS 3144 SAE AMS 3151B SAE AS 3163 SAE AMS 3166B SAE AMS-M3171 SAE AS 3174 SAE AS 3175 SAE AS 3176 SAE AS 3177 SAE AMS 3193C SAE AMS 3194C SAE AMS 3195E SAE AMS 3196F

SAE AMS 3197K SAE AMS 3198K SAE AMS 3199K SAE AMS 3200J SAE AMS 3201K SAE AMS 3202L SAE AMS 3204L SAE AMS 3205L SAE AMS 3207M SAE AMS 3208M SAE AS 3208 SAE AMS 3209L SAE AS 3209 SAE AMS 3212N SAE AMS 3213L SAE AMS 3214K SAE AMS 3215L SAE AS 3215A SAE AS 3216A SAE AMS 3217A SAE AMS 3217/1B SAE AMS 3217/2B SAE AMS 3217/3B

SAE AMS 3217/4A SAE AMS 3217/5B SAE AMS 3217/6 SAE AS 3217A SAE AS 3218A SAE AS 3219A SAE AMS 3220F SAE AS 3220 SAE AMS 3222G SAE AMS 3226G SAE AMS 3227G SAE AS 3228A SAE AS 3229A SAE AS 3230A SAE AS 3231A SAE AS 3232 SAE AS 3233 SAE AS 3234 SAE AS 3235A SAE AMS 3237F SAE AMS 3238E SAE AMS 3239E SAE AMS 3240J SAE AMS 3241H

SAE AMS 3243F SAE AMS 3244G SAE AMS 3248B SAE AMS 3249C SAE AMS 3251G SAE AS 3257 SAE MA 3259 SAE AIR 3260 SAE AMS 3260B SAE AS 3261 SAE MA 3266 SAE AMS 3269 SAE AMS 3270J SAE AMS 3272A SAE AS 3272 SAE AMS 3273E SAE AS 3273 SAE AMS 3274G SAE MA 3274 SAE AMS 3275B SAE MA 3275 SAE AMS 3276C SAE AMS 3277A SAE MA 3279B SAE MA 3280B

SAE AMS 3281B SAE MA 3281B SAE MA 3286A SAE MA 3287 SAE MA 3288 SAE MA 3289 SAE AS 3291A SAE MA 3294 SAE MA 3295 SAE MA 3296 SAE AMS 3301G SAE AMS 3302G SAE MA 3302 SAE AMS 3303J SAE AS 3303 SAE AMS 3304G SAE MA 3304 SAE AMS 3305H SAE AMS 3307C SAE AS 3307 SAE AS 3308 SAE AS 3309 SAE AMS 3315F SAE AS 3319A SAE AMS 3320G SAE AS 3320A SAE AS 3321A SAE AS 3322A

SAE AMS 3323 SAE AMS 3325D SAE AMS 3327C SAE AMS 3328A SAE AMS 3329A SAE MA 3329C SAE AMS 3330A SAE MA 3330C SAE AMS 3331A SAE MA 3331C SAE AMS 3332D SAE AMS 3334D SAE AMS 3336D SAE AMS 3337D SAE AMS 3338F SAE MA 3338 SAE MA 3339 SAE MA 3340B SAE MA 3341 SAE MA 3342 SAE MA 3343 SAE MA 3344 SAE AMS 3345E SAE AMS 3346F

SAE AMS 3347B SAE MA 3347 SAE AMS 3348C SAE MA 3348 SAE AMS 3349C SAE MA 3349 SAE MA 3350 SAE MA 3351 SAE MA 3352 SAE MA 3353 SAE MA 3354 SAE AMS 3356E SAE AMS 3357G SAE MA 3365 SAE MA 3366 SAE MA 3368 SAE MA 3369 SAE MA 3371 SAE AMS 3374A SAE MA 3374A SAE AMS 3375B SAE MA 3376B SAE MA 3377A SAE MA 3378C SAE MA 3379 SAE AMS 3380D SAE MA 3380 SAE MA 3381 SAE AMS 3382C

SAE MA 3382 SAE MA 3383 SAE MA 3384 SAE MA 3385 SAE MA 3386 SAE MA 3387 SAE MA 3388 SAE MA 3389 SAE MA 3390 SAE MA 3391 SAE MA 3392 SAE MA 3393 SAE MA 3394 SAE MA 3398 SAE MA 3399 SAE AS 3400 SAE AS 3401 SAE AS 3402 SAE AS 3403 SAE AS 3404 SAE AS 3405 SAE AS 3406 SAE AS 3407 SAE AMS 3410J SAE AMS 3411D SAE AMS 3412D SAE AMS 3415C SAE MA 3421 SAE MA 3422 SAE MA 3423 SAE MA 3424 SAE MA 3425 SAE MA 3426 SAE MA 3427 SAE MA 3428 SAE MA 3429 SAE MA 3433 SAE MA 3434 SAE AS 3435 SAE AS 3436

SAE MA 3437 SAE MA 3438 SAE MAP 3439 SAE MAP 3440 SAE MA 3442 SAE MA 3444 SAE MA 3445 SAE MA 3446A SAE MA 3447 SAE MA 3448 SAE MA 3449 SAE MA 3450 SAE MA 3453 SAE MA 3476 SAE AS 3477A SAE AS 3479B SAE AS 3480A SAE AS 3481C SAE AS 3482A SAE AS 3483A SAE AS 3485 SAE AS 3486A SAE AS 3490 SAE AS 3491 SAE AS 3492 SAE AS 3493 SAE AS 3494 SAE AS 3495 SAE AS 3496 SAE AS 3497 SAE AS 3498 SAE AS 3504 SAE AS 3505

SAE AS 3506 SAE AS 3510A SAE AS 3511A SAE AMS 3529A SAE AS 3547 SAE AS 3548 SAE AS 3549 SAE AS 3550 SAE AS 3551 SAE AMS 3568A SAE AMS 3568/1A SAE AMS 3568/2A SAE AMS 3568/3A SAE AS 3569 SAE AMS 3570E SAE AS 3570 SAE AMS 3571B SAE AMS 3571/1B SAE AMS 3571/2B SAE AMS 3571/3B SAE AMS 3571/4B SAE AMS 3571/5B SAE AMS 3571/6B SAE AMS 3571/7B SAE AMS 3571/8B

SAE AMS 3571/9B SAE AS 3574A SAE MA 3574 SAE AS 3577 SAE AS 3578 SAE AS 3580 SAE AS 3581 SAE AS 3582 SAE AS 3584 SAE AS 3585 SAE AS 3586 SAE AS 3587 SAE AS 3588 SAE AS 3589 SAE AMS 3607F SAE AMS 3611D SAE AMS 3613C SAE AMS 3615E SAE AMS 3619C SAE AMS 3623D SAE AMS 3628D SAE AMS 3632E SAE AMS 3635D SAE AMS 3636G SAE AMS 3638F SAE AMS 3646C SAE AMS 3647C SAE AMS 3648B

SAE AMS 3649C SAE AMS 3650C SAE AMS 3652C SAE AMS 3653E SAE AMS 3654C SAE AMS 3655B SAE AMS 3656E SAE AMS 3662C SAE AMS 3666D SAE AMS 3668C SAE AMS 3679B SAE AMS 3680C SAE AMS 3686A SAE AMS 3688B SAE AMS 3689B SAE AMS 3710C SAE AMS 3722A SAE AMS 3726/2A SAE AMS 3726/3A SAE AMS 3751B SAE AMS 3756A SAE AMS 3792B

SAE AMS 3792/1A SAE AMS 3792/2A SAE AMS 3792/3A SAE AMS 3797B SAE AMS 3797/1B SAE AMS 3797/2B SAE AMS 3797/3B SAE AMS 3797/4B SAE AMS 3797/5B SAE AMS 3797/6B SAE AMS 3797/7B SAE AMS 3797/8B SAE AMS 3797/9B SAE AMS 3797/10B SAE AMS 3797/11B SAE AMS 3797/12B SAE AMS 3798B SAE AMS 3798/1B SAE AMS 3798/2B SAE AMS 3798/3B SAE AMS 3798/4B SAE AMS 3798/5B

SAE AMS 3798/6B SAE AMS 3798/7B SAE AMS 3798/8B SAE AMS 3798/9B SAE AMS 3798/10B SAE AMS 3798/11B SAE AMS 3798/12B SAE AMS 3798/13B SAE AMS 3798/14B SAE AMS 3798/15B SAE AMS 3798/16B SAE AMS 3799B SAE AMS 3799/1B SAE AMS 3799/2B SAE AMS 3799/3B SAE AMS 3799/4B SAE AMS 3801A SAE AMS 3801/1A SAE AMS 3801/2A SAE AMS 3801/3A SAE AMS 3801/4A SAE AMS 3801/5A

SAE AMS 3808A SAE AMS 3813A SAE AMS 3813/1A SAE AMS 3813/2A SAE AMS 3813/3A SAE AMS 3817D SAE AMS 3819B SAE AMS 3824C SAE AMS 3827B SAE AMS 3832C SAE AMS 3837D SAE AMS 3846C SAE AMS 3847C SAE AMS 3865C SAE AMS 3867B SAE AMS 3867/1B SAE AMS 3867/2B SAE AMS 3867/3B SAE AMS 3867/4A SAE AMS 3867/5A SAE AMS 3867/6A SAE AMS 3890A

SAE AMS 3892B SAE AMS 3892/1B SAE AMS 3892/2B SAE AMS 3892/3B SAE AMS 3892/4B SAE AMS 3892/5B SAE AMS 3892/6A SAE AMS 3892/7A SAE AMS 3892/8A SAE AMS 3892/9B SAE AMS 3892/10A SAE AMS 3894E SAE AMS 3894/1B SAE AMS 3894/2B SAE AMS 3894/3B SAE AMS 3894/5B SAE AMS 3894/7B SAE AMS 3894/8B SAE AMS 3894/9B SAE AMS 3894/10A SAE AMS 3894/11A SAE AMS 3898B

SAE AMS 3898/1B SAE AMS 3898/2B SAE AMS 3898/3B SAE AMS 3898/4B SAE AMS 3898/5B SAE AMS 3901C SAE AMS 3901/1C SAE AMS 3901/2C SAE AMS 3901/3C SAE AMS 3901/4C SAE AMS 3901/5C SAE AMS 3901/6C SAE AMS 3901/7C SAE AMS 3901/8B SAE AMS 3901/9B SAE AMS 3901/10B SAE AMS 3901/11B SAE AMS 3901/12B SAE AMS 3902E SAE AMS 3903A SAE AMS 3903/1A SAE AMS 3903/2A

SAE AMS 3903/3A SAE AMS 3903/4A SAE AMS 3903/5A SAE AMS 3903/6A SAE AMS 3903/7A SAE AMS 3903/8A SAE AMS 3906B SAE AMS 3906/1B SAE AMS 3906/2B SAE AMS 3906/3B SAE AMS 3906/4B SAE AMS 3906/5B SAE AMS 3906/6B SAE AMS 3906/7B SAE AMS 3912A SAE AMS 4003G SAE ARP 4005A SAE AMS 4009A SAE MA 4016 SAE MA 4017 SAE MA 4018 SAE MA 4019 SAE MA 4020 SAE AMS 4021F SAE MA 4021

SAE AMS 4026K SAE AMS 4029J SAE MA 4029 SAE MA 4030 SAE MA 4035 SAE AMS 4036J SAE MA 4036 SAE MA 4037A SAE MA 4038A SAE MA 4039A SAE MA 4040A SAE MA 4044 SAE MA 4045 SAE AMS 4049J SAE AMS 4050G SAE AS 4059D SAE AMS 4066B SAE AIR 4069A SAE MA 4070 SAE AMS 4071K SAE AMS 4081H SAE AMS 4082N SAE AMS 4083K SAE AMS 4084C

SAE AMS 4085B SAE AMS 4089C SAE AMS 4090D SAE AS 4099A SAE AMS 4100C SAE AMS 4107E SAE AMS 4108E SAE AMS 4111B SAE AMS 4120P SAE AMS 4121G SAE AMS 4126B SAE AMS 4127H SAE AMS 4130L SAE AMS 4132E SAE AMS 4133D SAE AMS 4134D SAE AMS 4141E SAE AMS 4143C SAE AMS 4144E SAE AMS 4146D SAE AMS 4147C SAE MA 4147

SAE AMS 4148D SAE AMS 4149C SAE AS 4149 SAE AMS 4157C SAE AMS 4159C SAE AMS 4162C SAE AMS 4163C SAE AMS 4167G SAE AS 4167A SAE AMS 4174C SAE MA 4177 SAE AMS 4179B SAE AMS 4184E SAE AMS 4185D SAE AMS 4186B SAE MA 4187 SAE MA 4189 SAE AMS 4190F SAE AS 4194 SAE AMS 4200A SAE AMS 4201D SAE AMS 4202C SAE AMS 4204B SAE AMS 4205B

SAE AMS 4207A SAE AMS 4212H SAE AMS 4233B SAE AMS 4235A SAE AMS 4236A SAE AMS 4244A SAE AMS 4245B SAE AMS 4246B SAE AMS 4247A SAE AMS 4248A SAE AMS 4259A SAE AMS 4261E SAE AMS 4270A SAE AIR 4275 SAE AMS 4281F SAE AS 4283A SAE AS 4299A SAE AMS 4300B SAE AMS 4308 SAE AMS 4309 SAE AMS 4310C SAE AMS 4311C

SAE AMS 4312C SAE AMS 4314B SAE AMS 4320A SAE AMS 4321A SAE AS 4330 SAE AMS 4334 SAE AMS 4340D SAE AMS 4341D SAE AMS 4342D SAE AMS 4343C SAE AMS-G4343 SAE MA 4360 SAE AS 4370B SAE AMS 4375J SAE AMS 4376F SAE AMS 4377G SAE AMS-S4383 SAE AS 4389 SAE AS 4393A SAE AMS 4395E SAE AS 4395A SAE AS 4396A SAE AS 4417

SAE AMS 4418F SAE AMS 4452B SAE AMS 4453C SAE AMS 4455D SAE ARP 4462 SAE AMS 4484J SAE AMS 4500H SAE AMS 4505H SAE AS 4506A SAE AMS 4507G SAE MA 4534 SAE AMS 4535B SAE AMS 4616E SAE AMS 4640F SAE AMS 4651B SAE AS 4702A SAE AS 4710 SAE AS 4716 SAE AMS 4750C SAE AMS 4764E SAE AMS 4765E SAE AMS 4766G SAE AMS 4767F

SAE AMS 4770K SAE AMS 4771H SAE AMS 4772J SAE AMS 4773F SAE AMS 4774F SAE AMS 4775G SAE AMS 4776F SAE AMS 4777F SAE AMS 4778G SAE AMS 4779F SAE AMS 4780E SAE AMS 4782E SAE AMS 4783E SAE AMS 4784E SAE AMS 4785D SAE AMS 4786E SAE AMS 4787F SAE AMS 4800D SAE AMS 4805D SAE AMS 4820D SAE AMS 4827D SAE AS 4841

SAE AMS 4842D SAE AS 4842 SAE AS 4842/1 SAE AS 4843 SAE AS 4843/1 SAE AS 4843/2 SAE ARP 4848 SAE AMS 4855F SAE AS 4855 SAE AS 4857 SAE AS 4858 SAE AS 4859 SAE AMS 4860E SAE AS 4860 SAE AS 4861 SAE AMS 4862F SAE AS 4863 SAE AS 4875 SAE AS 4875/1 SAE AS 4875/2 SAE AS 4877A SAE AMS 4880C SAE AMS 4890B

SAE AMS 4892B SAE AMS 4911H SAE AMS 4921G SAE AMS 4922A SAE AMS 4926J SAE AMS 4928Q SAE AMS 4931A SAE AMS 4935F SAE AMS 4941C SAE AMS 4942D SAE AMS 4943F SAE AMS 4951F SAE AMS 4956C SAE AMS 4957B SAE AMS 4959C SAE AMS 4963 SAE AMS 4965G SAE AMS 4966L SAE AMS 4970F SAE AMS 4971E SAE AMS 4972D SAE AMS 4975G

SAE AMS 4976E SAE AMS 4978C SAE AMS 4979D SAE AMS 4981C SAE AMS 4982B SAE AMS 4983B SAE AS 4983 SAE AMS 4984A SAE AMS-S5000 SAE AMS-R5001 SAE AS 5017 SAE AMS 5020D SAE AMS 5022M SAE AMS 5024G SAE AMS 5027D SAE AMS 5028C SAE AMS 5030G SAE AMS 5036G SAE AMS 5040L SAE AMS 5042K SAE AMS 5044H SAE AMS 5045G

SAE AMS 5050J SAE AMS 5053G SAE AMS 5060G SAE AMS 5061E SAE AMS 5062F SAE AMS-T5066 SAE AMS 5075E SAE AMS 5077E SAE AMS 5080H SAE AMS 5085E SAE AMS 5110G SAE AMS 5120J SAE AMS 5121G SAE AMS 5122G SAE AS 5131 SAE AMS 5132H SAE AS 5132 SAE AS 5135 SAE AS 5160 SAE AS 5161A SAE AS 5164 SAE AS 5165 SAE AS 5168

SAE AS 5169 SAE AS 5172 SAE AS 5173 SAE AS 5174 SAE AS 5176 SAE AS 5178 SAE AS 5179 SAE AS 5180 SAE AS 5181 SAE AS 5182 SAE AS 5183 SAE AS 5184 SAE AS 5185 SAE AS 5186 SAE AS 5187 SAE AS 5188 SAE AS 5189 SAE AS 5194A SAE AS 5201 SAE AMS 5223E SAE AMS 5225E SAE AS 5258

SAE AS 5258/1 SAE AS 5258/2 SAE AS 5258/3 SAE AS 5258/4 SAE AS 5258/5 SAE AS 5258/6 SAE AS 5258/7 SAE AS 5258/8 SAE AS 5258/9 SAE AS 5258/10 SAE ARP 5316 SAE AMS 5333D SAE AMS 5334F SAE AMS 5337B SAE AMS 5339D SAE AMS 5342D SAE AMS 5343D SAE AMS 5344D SAE AMS 5347A SAE AMS 5349C SAE AMS 5350H SAE AMS 5352D

SAE AMS 5353C SAE AMS 5354E SAE AS 5355 SAE AS 5355/1 SAE AS 5355/2 SAE AS 5355/3 SAE AMS 5356A SAE AS 5356 SAE AMS 5357A SAE AMS 5360E SAE AMS 5362K SAE AMS 5366D SAE AMS 5370C SAE AS 5372 SAE AMS 5377E SAE AS 5379 SAE AMS 5380F SAE AMS 5382H SAE AMS 5383D SAE AMS 5384D SAE AMS 5385G SAE AMS 5390D SAE AMS 5391E

SAE AMS 5398E SAE AMS 5399C SAE AMS 5400A SAE AMS 5401B SAE MAM 5401A SAE AS 5406 SAE AMS 5412 SAE AS 5440 SAE AMS 5503D SAE AMS 5504K SAE AMS 5505D SAE AMS 5506E SAE AMS 5507E SAE AMS 5508F SAE AMS 5510P SAE AMS 5511G SAE AMS 5512K SAE AMS 5513G SAE AMS 5514G SAE AMS 5516M SAE AMS 5517L SAE AMS 5518J

SAE AMS 5519L SAE AMS 5520E SAE AMS 5521G SAE AMS 5523E SAE AMS 5524J SAE AMS 5525G SAE AMS 5528F SAE AMS 5529E SAE AMS 5532F SAE AMS 5536L SAE MAM 5536A SAE AMS 5540L SAE AMS 5542L SAE AMS 5544G SAE AMS 5545D SAE AMS 5547G SAE AMS 5548M SAE AMS 5552E SAE AMS 5553E SAE AMS 5554D SAE AMS 5556G SAE AMS 5558E

SAE AMS 5559H SAE AMS 5560J SAE AMS 5561F SAE AMS 5562D SAE AMS 5564C SAE AMS 5565K SAE AMS 5566L SAE AMS 5567D SAE AMS 5570N SAE AMS 5571G SAE AMS 5572G SAE AMS 5575M SAE AMS 5576J SAE AMS 5578D SAE AMS 5580J SAE AMS 5582D SAE AMS 5583C SAE AMS 5584 SAE AMS 5585E SAE AMS 5586E SAE AS 5587 SAE AMS 5588F

SAE AMS 5589D SAE AMS 5590E SAE AMS 5591J SAE AMS 5592D SAE AMS 5593E SAE AMS 5595F SAE AMS 5596J SAE AMS 5597E SAE AMS 5598D SAE MAM 5598B SAE AMS 5599F SAE MAM 5599B SAE AMS 5604D SAE AS 5604 SAE AMS 5608D SAE AMS 5609D SAE AMS 5610M SAE AMS 5612G SAE AMS 5613P SAE AMS 5614D SAE AMS 5616K SAE AMS 5617H

SAE AMS 5618F SAE AMS 5620F SAE AMS 5629D SAE AMS 5630G SAE AMS 5632G SAE AMS 5635D SAE AMS 5636E SAE AMS 5637F SAE AMS 5638E SAE AMS 5639G SAE AMS 5640R SAE AMS 5641F SAE AMS 5642J SAE AMS 5643P SAE AMS 5646L SAE AMS 5647G SAE AMS 5649E SAE AMS 5650E SAE AMS 5653E SAE AMS 5655D SAE AMS 5656D SAE AMS 5659K

SAE AMS 5660H SAE AMS 5661E SAE AMS 5662L SAE AMS 5663J SAE AMS 5664E SAE AMS 5665M SAE AMS 5666E SAE AMS 5667K SAE AMS 5668H SAE AMS 5671F SAE AMS 5672B SAE AMS 5674D SAE AMS 5675D SAE AMS 5676E SAE AMS 5678D SAE AMS 5679G SAE AMS 5680H SAE AMS 5682D SAE AMS 5685J SAE AMS 5686G SAE AMS 5687L SAE AMS 5688K

SAE AMS 5689E SAE AMS 5690L SAE AMS 5692C SAE AMS 5694G SAE AMS 5697D SAE AMS 5698F SAE AMS 5699F SAE AMS 5701C SAE AMS 5703C SAE AMS 5704G SAE AMS 5706J SAE MAM 5706B SAE AMS 5707J SAE AMS 5708G SAE AMS 5709G SAE AMS 5712H SAE AMS 5713H SAE AMS 5716G SAE AMS 5717G SAE AMS 5719C SAE AMS 5731J SAE AMS 5732G

SAE AMS 5734H SAE AMS 5737M SAE AMS 5738C SAE AMS 5743H SAE AMS 5744D SAE AMS 5745E SAE AMS 5746E SAE AMS 5749D SAE AMS 5754K SAE AMS 5755E SAE AMS 5758F SAE AMS 5759J SAE AMS 5763C SAE AMS 5764C SAE AMS 5766C SAE AMS 5768J SAE AMS 5769E SAE AMS 5771D SAE AMS 5772C SAE AMS 5774D SAE AMS 5776D SAE AMS 5778D

SAE AS 5778 SAE AMS 5780D SAE AMS 5782E SAE AMS 5784D SAE AMS 5786D SAE AMS 5788E SAE AMS 5789C SAE AMS 5790B SAE AMS 5791A SAE AMS 5793A SAE AMS 5794D SAE AMS 5796D SAE AMS 5798D SAE AMS 5800E SAE AMS 5801E SAE AMS 5802B SAE AMS 5803C SAE AMS 5804F SAE AMS 5805F SAE AMS 5808B SAE AMS 5810 SAE AS 5813 SAE AMS 5814B

SAE AMS 5817E SAE AMS 5819 SAE AMS 5821F SAE AMS 5822C SAE MAM 5822A SAE AMS 5823D SAE AS 5823 SAE AMS 5825F SAE AMS 5826C SAE AMS 5828F SAE AMS 5829D SAE AMS 5830A SAE AMS 5831A SAE AMS 5832E SAE AMS 5833B SAE AMS 5836A SAE AMS 5837F SAE AMS 5838D SAE AMS 5839 SAE AMS 5840C SAE AMS 5841D SAE AMS 5842D

SAE AMS 5843D SAE AMS 5844E SAE AMS 5845E SAE AMS 5846A SAE AMS 5850C SAE AMS 5854 SAE AMS 5857A SAE AMS 5860E SAE AMS 5862E SAE AMS 5863D SAE AMS 5864A SAE AMS 5865C SAE AMS 5866C SAE AMS 5869A SAE AMS 5871D SAE AMS 5873C SAE AMS 5878A SAE AMS 5879B SAE AMS 5880B SAE AMS 5884A SAE AMS 5887A SAE AMS 5888A

SAE AMS 5889A SAE AMS 5890C SAE AMS 5896A SAE AMS 5897A SAE AMS 5898A SAE AMS 5900B SAE AMS 5901B SAE AMS 5902A SAE AMS 5903A SAE AMS 5904A SAE AMS 5905A SAE AMS 5906A SAE AMS 5907A SAE AMS 5910A SAE AMS 5911A SAE AMS 5912A SAE AMS 5913A SAE AMS 5914 SAE AMS 5930 SAE AMS 5931 SAE AMS 5940 SAE AS 5944

SAE AMS 5962 SAE ARP 6002 SAE AS 6011 SAE AMS-G6032 SAE AS 6038 SAE AS 6039B SAE AMS-S6098 SAE AS 6136 SAE AS 6144 SAE AMS-C6183 SAE AMS 6250J SAE AMS 6257 SAE AMS 6260M SAE AMS 6265J SAE AMS 6267E SAE AMS 6270M SAE AMS 6274L SAE AMS 6276G SAE AMS 6277E SAE AMS 6278A SAE AMS 6280H SAE AMS 6282H SAE AMS 6290G

SAE AMS 6292F SAE AMS 6294F SAE AMS 6299D SAE AMS 6300D SAE AMS 6302F SAE AS 6302 SAE AMS 6303E SAE AMS 6304H SAE MAM 6304A SAE AMS 6305C SAE AMS 6308B SAE AMS 6320K SAE AMS 6322L SAE AMS 6323J SAE AMS 6324F SAE AMS 6325G SAE AMS 6327G SAE AMS 6328J SAE AMS 6345 SAE AMS 6348B SAE AMS 6350J SAE AMS 6351F

SAE AMS 6352G SAE AMS 6354D SAE AMS 6356D SAE AMS 6358G SAE AMS 6359F SAE AMS 6360K SAE AMS 6361D SAE AMS 6362E SAE AMS 6365H SAE AMS 6370K SAE AMS 6371H SAE AMS 6372J SAE AMS 6373E SAE AMS 6374B SAE AMS 6375A SAE AMS 6378E SAE AMS 6381F SAE AMS 6382L SAE AMS 6385E SAE AMS 6395E SAE AMS 6396C SAE AS 6399

SAE AMS 6407F SAE AMS 6408A SAE AMS 6411E SAE AMS 6412K SAE AMS 6414H SAE AMS 6415P SAE AMS 6417E SAE AMS 6419E SAE AMS 6422F SAE AMS 6424C SAE AMS 6425A SAE AMS 6426D SAE AMS 6427H SAE AMS 6428E SAE AMS 6429E SAE AMS 6430E SAE AMS 6431K SAE AMS 6433D SAE AMS 6435C SAE AMS 6437E SAE AMS 6438D SAE AMS 6439B

SAE AS 6439 SAE AMS 6440K SAE AMS 6444H SAE AMS 6447E SAE AMS 6448H SAE AMS 6450G SAE AS 6451 SAE AMS 6453A SAE AMS 6454B SAE AMS 6455G SAE AMS 6459C SAE AMS 6460E SAE AMS 6462G SAE AMS 6463C SAE AMS 6465C SAE AMS 6466E SAE AMS 6469B SAE AMS 6470K SAE AMS 6475G SAE AMS 6476B SAE AMS 6477 SAE AMS 6478

SAE AS 6480 SAE AMS 6484A SAE AMS 6487H SAE AMS 6488F SAE AMS 6490E SAE AMS 6491B SAE AMS 6501B SAE AMS 6519A SAE AMS 6520C SAE AMS 6522A SAE AMS 6523E SAE AMS 6525B SAE AMS 6526D SAE AMS 6527C SAE AMS 6528A SAE AMS 6529A SAE AMS 6532A SAE AMS 6533A SAE AMS 6543B SAE AMS 6544B SAE AS 6625 SAE AMS-T6735 SAE AMS-T6736

SAE AMS-S6758 SAE AMS-T6841 SAE AMS-T6845 SAE AMS-R6855A SAE AMS-W6858A SAE AMS-H6875A SAE AS 6882 SAE AMS-I7068 SAE AMS-T7081 SAE AS 7092 SAE AMS-S7124 SAE AMS-I7171 SAE AMS-F7190 SAE AMS-H7199 SAE AS 7220 SAE AS 7222A SAE AS 7225 SAE AS 7228 SAE AS 7229 SAE AS 7232 SAE AS 7233 SAE AS 7234 SAE AS 7235 SAE AS 7236

SAE AS 7237 SAE AS 7245 SAE AS 7246 SAE AS 7250A SAE AS 7251A SAE AS 7253A SAE AMS 7255C SAE AMS 7256A SAE AMS 7257C SAE AMS 7258B SAE AMS 7260E SAE AMS 7264A SAE AMS 7266B SAE AMS 7267G SAE AMS 7268C SAE AMS 7269B SAE AMS 7270K SAE AMS 7271H SAE AMS 7272F SAE AMS 7273C SAE AMS 7274H SAE AS 7283

SAE AMS 7301F SAE AMS 7320D SAE AMS 7322D SAE AS 7325A SAE AS 7351 SAE AS 7431 SAE AMS 7445C SAE AS 7452 SAE AS 7454 SAE AS 7455 SAE AS 7456 SAE AS 7458 SAE AS 7459A SAE AS 7460 SAE AS 7461 SAE AS 7466A SAE AS 7467A SAE AS 7468B SAE AS 7469 SAE AS 7470 SAE AS 7471B SAE AS 7472 SAE AS 7473A SAE AS 7474B SAE AS 7475B

SAE AS 7477D SAE AS 7478B SAE AS 7482A SAE AMS 7488D SAE AMS 7490N SAE AMS 7493K SAE AMS 7496H SAE AMS 7498K SAE AMS 7510A SAE AMS 7510/1A SAE AMS 7510/2A SAE AMS 7701D SAE AMS 7702D SAE AMS 7705D SAE AMS 7707B SAE AMS 7717C SAE AMS 7718D SAE AMS-S7720 SAE AMS 7721B SAE AMS 7725C SAE AMS 7727D SAE AMS 7728G

SAE AMS 7731B SAE AMS 7732B SAE AS 7768 SAE AS 7768/1 SAE AS 7788 SAE AMS-M7866 SAE AMS 7903 SAE AMS 7904A SAE AMS 7905 SAE AMS 7906 SAE AMS 7907 SAE AS 7928 SAE AS 7928/4 SAE AS 7928/5 SAE AS 7928/6 SAE AS 7928/1A SAE AS 7928/2A SAE AS 7928/7 SAE AMS-C8073 SAE AS 8090 SAE AS 8091 SAE AS 8181 SAE AMS-T8506

SAE AMS-S8559 SAE AS 8568 SAE AMS-A8576 SAE AS 8581 SAE AS 8660 SAE AS 8662 SAE AS 8700 SAE AS 8712 SAE AS 8775 SAE AS 8791 SAE AS 8791/1A SAE AS 8796 SAE AMS-S8802 SAE AS 8804 SAE AMS-C8837 SAE AS 8905 SAE AS 8914 SAE AMS-S8949 SAE AMS-S8840 SAE AS 8952 SAE AMS-B8964 SAE AS 8976 SAE AS 8991 SAE AMS-T9046

SAE AS 9058A SAE AMS-C9084 SAE AS 9105 SAE AS 9112A SAE AS 9141 SAE AS 9142 SAE AS 9144 SAE AS 9158 SAE AS 9201 SAE AS 9202 SAE AS 9203 SAE AS 9204 SAE AS 9205 SAE AS 9208 SAE AS 9209 SAE AS 9210 SAE AS 9212 SAE AS 9216 SAE AS 9217 SAE AS 9218 SAE AS 9219 SAE AS 9230 SAE AS 9245 SAE AS 9276 SAE AS 9283 SAE AS 9284 SAE AS 9285 SAE AS 9286 SAE AS 9292 SAE AS 9294

SAE AS 9296 SAE AS 9297 SAE AS 9303 SAE AS 9304 SAE AS 9305 SAE AS 9306 SAE AS 9307 SAE AS 9308 SAE AS 9309 SAE AS 9310 SAE AS 9311 SAE AS 9312 SAE AS 9316 SAE AS 9317 SAE AS 9318 SAE AS 9319 SAE AS 9320 SAE AS 9321 SAE AS 9353 SAE AS 9354 SAE AS 9357 SAE AS 9358 SAE AS 9359 SAE AS 9360 SAE AS 9361 SAE AS 9362 SAE AS 9363 SAE AS 9364 SAE AS 9371 SAE AS 9372 SAE AS 9373 SAE AS 9374 SAE AS 9375 SAE AS 9376 SAE AS 9379 SAE AS 9380 SAE AS 9385

SAE AS 9386 SAE AS 9389 SAE AS 9390A SAE AS 9391 SAE AS 9392 SAE AS 9393 SAE AS 9394 SAE AS 9395 SAE AS 9397 SAE AS 9398 SAE AS 9403 SAE AS 9432 SAE AS 9433 SAE AS 9434 SAE AS 9440 SAE AS 9441 SAE AS 9442 SAE AS 9449 SAE AS 9450 SAE AS 9451 SAE AS 9452 SAE AS 9453 SAE AS 9454 SAE AS 9455 SAE AS 9456 SAE AS 9457 SAE AS 9458 SAE AS 9459 SAE AS 9460 SAE AS 9462 SAE AS 9463 SAE AS 9464 SAE AS 9465 SAE AS 9466 SAE AS 9467 SAE AS 9468 SAE AS 9482 SAE AS 9486 SAE AS 9489

SAE AS 9490 SAE AS 9491 SAE AS 9492 SAE AS 9493 SAE AS 9494 SAE AS 9496 SAE AS 9500 SAE AS 9501 SAE AS 9502 SAE AS 9503 SAE AS 9505 SAE AS 9516 SAE AS 9517 SAE AS 9518 SAE AS 9519 SAE AS 9520 SAE AS 9521 SAE AS 9522 SAE AS 9523 SAE AS 9524 SAE AS 9525 SAE AS 9526 SAE AS 9527 SAE AS 9528 SAE AS 9529 SAE AS 9530 SAE AS 9531 SAE AS 9532 SAE AS 9533 SAE AS 9534 SAE AS 9549 SAE AS 9551 SAE AS 9552 SAE AS 9553 SAE AS 9554

SAE AS 9555 SAE AS 9556 SAE AS 9557 SAE AS 9558 SAE AS 9559 SAE AS 9564 SAE AS 9565A SAE AS 9566 SAE AS 9567 SAE AS 9568A SAE AS 9572 SAE AS 9573 SAE AS 9574 SAE AS 9575 SAE AS 9576 SAE AS 9577 SAE AS 9579 SAE AS 9581 SAE AS 9582 SAE AS 9583 SAE AS 9584 SAE AS 9585 SAE AS 9586 SAE AS 9587 SAE AS 9588 SAE AS 9589 SAE AS 9592

SAE AS 9593 SAE AS 9594 SAE AS 9595 SAE AS 9596 SAE AS 9597 SAE AS 9598 SAE AS 9599 SAE AS 9601 SAE AS 9602 SAE AS 9603 SAE AS 9631 SAE AS 9633 SAE AS 9638 SAE AS 9676 SAE AS 9677 SAE AS 9678 SAE AS 9679 SAE AS 9681 SAE AS 9685 SAE AS 9686 SAE AS 9687 SAE AS 9696 SAE AS 9697 SAE AS 9698 SAE AS 9699 SAE AS 9705 SAE AS 9712 SAE AS 9714

SAE AS 9715 SAE AS 9716 SAE AS 9724A SAE AS 9732 SAE AS 9733 SAE AS 9734 SAE AS 9741 SAE AS 9742 SAE AS 9750 SAE AS 9751 SAE AS 9759 SAE AS 9760 SAE AS 9761 SAE AS 9770 SAE AS 9771 SAE AS 9772 SAE AS 9783 SAE AS 9784 SAE AS 9785 SAE AS 9786 SAE AS 9788 SAE AS 9790 SAE AS 9796 SAE AS 9805 SAE AS 9806 SAE AS 9808 SAE AS 9816 SAE AS 9821 SAE AS 9841 SAE AS 9842 SAE AS 9843

SAE AS 9844 SAE AS 9845 SAE AS 9846 SAE AS 9847 SAE AS 9848 SAE AS 9880 SAE AS 9881 SAE AS 9882 SAE AS 9885 SAE AS 9887 SAE AS 9890 SAE AS 9894 SAE AS 9895 SAE AS 9902 SAE AS 9914 SAE AS 9916 SAE AS 9917 SAE AS 9918 SAE AS 9923 SAE AS 9924 SAE AS 9928 SAE AS 9933 SAE AS 9944 SAE AS 9947 SAE AS 9955 SAE AS 9956 SAE AS 9958 SAE AS 9964 SAE AS 9966 SAE AS 9967

SAE AS 10051 SAE AS 10081 SAE AS 10380 SAE AMS-S13165 SAE AS 13341 SAE AS 13471 SAE AS 13591 SAE AS 14101 SAE AS 14102 SAE AS 14103A SAE AS 14104 SAE AS 14105 SAE AS 14114 SAE AS 14153A SAE AS 14154A SAE AS 14227 SAE AS 14237 SAE AS 14238A SAE AS 14243 SAE AS 14244 SAE AS 14274 SAE AS 14487 SAE AS 14488 SAE AS 17107 SAE AS 17143

SAE AS 17184 SAE AS 17852 SAE AS 17983 SAE AS 18012 SAE AS 18013 SAE AS 18121 SAE AS 18259 SAE AS 18276 SAE AS 18280 REV A SAE AS 18280/1 SAE AMS-L18331 SAE AS 18607 SAE AS 19692A SAE AMS-C19853 SAE AMS-B20148 SAE AS 20218 SAE AS 20253 SAE AS 20708 SAE AS 20708/1 SAE AS 20708/2 SAE AS 20708/3 SAE AS 20708/4 SAE AS 20708/5 SAE AS 20708/6

SAE AS 20708/7 SAE AS 20708/8 SAE AS 20708/9 SAE AS 20708/14 SAE AS 20708/15 SAE AS 20708/16 SAE AS 20708/17 SAE AS 20708/19 SAE AS 20708/20 SAE AS 20708/21 SAE AS 20708/22 SAE AS 20708/23 SAE AS 20708/28 SAE AS 20708/29 SAE AS 20708/30 SAE AS 20708/31 SAE AS 20708/32 SAE AS 20708/33 SAE AS 20708/34 SAE AS 20708/35 SAE AS 20708/36 SAE AS 20708/45

SAE AS 20708/46 SAE AS 20708/47 SAE AS 20708/48 SAE AS 20708/49 SAE AS 20708/50 SAE AS 20708/52 SAE AS 20708/53 SAE AS 20708/54 SAE AS 20708/55 SAE AS 20708/56 SAE AS 20708/62 SAE AS 20708/66 SAE AS 20708/67 SAE AS 20708/70 SAE AS 20708/74 SAE AS 20708/76 SAE AS 20708/78 SAE AS 20708/79 SAE AS 20708/80 SAE AS 20708/81 SAE AS 20708/131 SAE AS 20708/500

SAE AMS-T21014 SAE AS 21150B SAE AS 21151B SAE AS 21152B SAE AS 21153B SAE AS 21154 SAE AS 21155 SAE AMS-A21180 SAE AS 21220 SAE AS 21221 SAE AS 21223 SAE AS 21230 SAE AS 21231 SAE AS 21232 SAE AS 21233 SAE AS 21428A SAE AS 21431 SAE AS 21438 SAE AS 21439 SAE AS 21441A SAE AS 21442 SAE AS 21443 SAE AS 21446

SAE AS 21447 SAE AMS-T21595 SAE AMS-P21600 SAE AS 21608 SAE AS 21900A SAE AS 21902A SAE AS 21913A SAE AS 21914A SAE AS 21915 SAE AS 21916A SAE AS 21919 SAE AS 21921 SAE AS 21922 SAE AS 21923A SAE AS 21924A SAE AS 21925A SAE AS 21926 SAE AS 21935 SAE AS 21937 SAE AS 21938 SAE AS 21939 SAE AS 21941 SAE AS 21942 SAE AS 21944 SAE AS 21945 SAE AMS-T22085

SAE AS 22145 SAE AMSDTL-22499 SAE AMSDTL-22499/1A SAE AMSDTL-22499/2A SAE AMSDTL-22499/3 SAE AMSDTL-22499/4 SAE AMS-C22542 SAE AMS-C22587 SAE AMS-A22771 SAE AS 22805 SAE AMS-P22968 SAE AS 23003 SAE AMS-I23011 SAE AMSDTL-23053 SAE AMSDTL-23053/1 SAE AMSDTL-23053/4 SAE AS 23190 SAE AMS-T23397 SAE AS 23479 SAE AMSDTL-23053/5 SAE AMSDTL-23053/6

SAE AMSDTL-23053/7 SAE AMSDTL-23053/8 SAE AS 23899 SAE AS 24000 SAE AS 24001 SAE AMSDTL-23053/10 SAE AMSDTL-23053/11 SAE AMSDTL-23053/12 SAE AMSDTL-23053/13 SAE AMSDTL-23053/14 SAE AMSDTL-23053/15 SAE AMSDTL-23053/16 SAE AMSDTL-23053/17 SAE AMSDTL-23053/18 SAE AMS-I23053/2 SAE AS 23190/1 SAE AS 23190/2 SAE AS 23190/3 SAE AS 24333 SAE AS 24334 SAE AS 24405 SAE AS 24463A

SAE AS 24464 SAE AS 24509 SAE AS 24510 SAE AS 24563 SAE AMS-F24610 SAE AS 24651 SAE AS 24652 SAE AS 24654 SAE AS 25019 SAE AS 25027 SAE AS 25036 SAE AS 25050 SAE AS 25064 SAE AS 25109 SAE AS 25226 SAE AS 25281 SAE AMS-A25463 SAE AS 25481 SAE AMS-G25667 SAE AMS-G25871 SAE AS 27194 SAE AS 27195 SAE AS 27196 SAE AS 27197 SAE AS 27198 SAE AS 27212

SAE AS 27640A SAE AS 27641A SAE AS 27642A SAE AS 27643A SAE AS 27644A SAE AS 27645A SAE AS 27646A SAE AS 27647A SAE AS 27648A SAE AS 27649A SAE AMS-C27725 SAE AS 28772 SAE AS 28778 SAE AS 28912A SAE AS 28913A SAE AS 28914A SAE AS 28915A SAE AS 29512 SAE AS 29513 SAE AS 29523 SAE AS 29561 SAE AMS-C29602 SAE AS 31091A SAE AS 31171A SAE AS 31371A

SAE AS 31971 SAE AS 33201 SAE AS 33481 SAE AS 33514 SAE AS 33515 SAE AS 33559 SAE AS 33566 SAE AS 33583 SAE AS 33611 SAE AS 33671A SAE AS 33681A SAE AS 33731 SAE AS 33931A SAE AS 34001A SAE AS 34021A SAE AS 34121A SAE AS 34541 SAE AS 34591 SAE AS 35051 SAE AS 35061 SAE AS 35769 SAE AS 38386/1 SAE AS 38386/2 SAE AS 38386/3 SAE AS 38386/4 SAE AS 38390

SAE AS 38404 SAE AS 39631 SAE AS 39901 SAE AS 49011 SAE AS 50571 SAE AS 50881A SAE AS 51007 SAE AS 51989 SAE AS 51992 SAE AS 53731 SAE AS 56761 SAE AS 58091/1 SAE AS 70991 SAE AS 71051 SAE AS 81531 SAE AMS-C81562 SAE AS 81587 SAE AMS-A81596 SAE AS 81703 SAE AS 81714/1 SAE AS 81714/2 SAE AS 81714/3 SAE AS 81714/4

SAE AS 81714/5 SAE AS 81714/6 SAE AS 81714/7 SAE AS 81714/8 SAE AS 81714/9 SAE AS 81714/11 SAE AS 81714/12 SAE AMS-P81728 SAE AMS-C81769 SAE AS 81820 SAE AS 81820/1 SAE AS 81820/2 SAE AS 81820/3 SAE AS 81820/4 SAE AS 81822 SAE AS 81822/1 SAE AS 81822/3 SAE AS 81822/5 SAE AS 81824 SAE AS 81824/1 SAE AMS-H81829 SAE AMS-R81835 SAE AMS-T81914

SAE AMS-T81914/1 SAE AMS-T81914/2 SAE AMS-T81915 SAE AS 81934 SAE AS 81934/1 SAE AS 81934/2 SAE AS 81935 SAE AMS-T81914/3 SAE AMS-T81914/4 SAE AMS-T81914/5 SAE AMS-T81914/6 SAE AS 81935/1 SAE AS 81935/2 SAE AS 81935/3 SAE AS 81935/4 SAE AMS-T81914/7 SAE AS 81935/5 SAE AS 81936 SAE AS 819361 SAE AS 819362 SAE AMS-C81986 SAE AMS-C83231 SAE AMS-I83387

SAE AMS-C83445 SAE AS 83519 SAE AS 83519/1 SAE AS 83519/2 SAE AS 85075 SAE AS 85421 SAE AS 85720 SAE AS 85720/1 SAE AS 90376 SAE AS 91001 SAE AS 91101 SAE AS 91111 SAE AS 91601 SAE AS 91641 SAE AS 91691 SAE AS 91701 SAE AS 91711 SAE AS 91721 SAE AS 92001 SAE AS 115401 THRU AS 115450 SAE AS 115451 THRU AS 115500 SAE AS 115501 THRU AS 115550 SAE AS 115601 THRU AS 115650 SAE AS 115651 THRU AS 115700

SAE AS 115801 THRU AS 115850 SAE AS 115851 THRU AS 115900 SAE AS 115901 THRU AS 115950 SAE AS 115951 THRU AS 116000 SAE AS 116001 THRU AS 116050 SAE AS 116051 THRU AS 116100 SAE AS 116101 THRU AS 116150 SAE AS 116901 THRU AS 116912 SAE AS 116925 THRU AS 116960 SAE AS 117001 THRU AS 117040 SAE AS 117041 THRU AS 117080 SAE AS 121501 THRU AS 121525 SAE AS 121601 THRU AS 121650 SAE AS 121651 THRU AS 121700

SAE AS 121701 THRU AS 121750 SAE AS 121751 THRU AS 121800 SAE AS 121801 THRU AS 121850 SAE AS 121851 THRU AS 121925 SAE AS 122676 THRU AS 122775 SAE AS 122900 THRU AS 122939 SAE AS 123020 THRU AS 123119 SAE AS 123151 THRU AS 123300 SAE AS 123301 THRU AS 123450 SAE AS 123451 THRU AS 123600 SAE AS 123601 THRU AS 123750 SAE AS 124951 THRU AS 125100 SAE AS 125101A THRU 125250A SAE AS 125251A THRU 125400A

SAE AS 125401 THRU AS 125550 SAE AS 125551 THRU AS 125700 SAE AS 125701A THRU 125850A SAE AS 126275 THRU AS 126586 SAE AS 126587 THRU AS 126652 SAE AS 126881 THRU AS 127192 SAE AS 127193 THRU AS 127492 SAE AS 128363 THRU AS 128686 SAE AS 128687 THRU AS 128998 SAE AS 129293 THRU AS 129604 SAE AS 150201 THRU AS 150300 SAE AS 150301 THRU AS 150400 SAE AS 150426 THRU AS 150450 SAE AS 150501 THRU AS 150800

SAE AS 150801 THRU AS 151100 SAE AS 151401 THRU AS 151700 SAE AS 151701 THRU AS 152000 SAE AS 152601 THRU AS 152900 SAE AS 152901 THRU AS 153200 SAE AS 153201 THRU AS 153500 SAE AS 154701 THRU AS 155000 SAE AS 155001 THRU AS 155300 SAE AS 155301 THRU AS 155600 SAE AS 155901 THRU AS 156200 SAE AS 158901 THRU AS 159200 SAE AS 162501 THRU AS 162800 SDI/DOOR 111-B SDI/DOOR 111-C SDI/DOOR 111-D SDI/DOOR 111-E

SDI/DOOR 111-F SDI/DOOR 111-G SDI/DOOR 107 SDI/DOOR 111-A SMACNA KIT SMACNA SEI SSPC PAINT 1 SSPC SP COM SSPC PAINT 2 SSPC PAINT 13 SSPC PA 1 SSPC PS 1.09 SSPC SP 1 SSPC VIS 1 SSPC PA 2 SSPC SP 2 SSPC VIS 2 SSPC PA 3 SSPC SP 3 SSPC PA 4 SSPC PS 4.01 SSPC PS 4.02 SSPC PAINT 5 SSPC SP 5 SSPC SP 6

SSPC SP 7 SSPC PAINT 8 SSPC SP 8 SSPC PAINT 9 SSPC PS 10.01 SSPC SP 10 SSPC PAINT 11 SSPC PS 11.01 SSPC SP 11 SSPC PS 12.01 SSPC PS 13.01 SSPC PS 14.01 SSPC PAINT 15 SSPC PAINT 16 SSPC PAINT 20 SSPC PAINT 22 SSPC PAINT 27 SSPC PAINT 101 TIA TIA/EIA455-35A UL 5 UL 1 UL 38 UL 44 UL 3

UL 4 UL 67 UL 6 UL 83 UL 94 UL 9 UL 10A UL 10B UL 109 UL 252 UL 325 UL 14B UL 14C UL 486A UL 486B UL 497 UL 514A UL 514C UL 19 UL 746A UL 746B UL 746C UL 746D UL 746E

UL 20 UL 796 UL 873 UL 923 UL 924 UL 935 UL 1082 UL 1242 UL 1449 UL 1581 UL 32 UL 33 UL 45 UL 50 UL 58 UL 62 UL 67 UL 70 UL 73 UL 80 UL 87 UL 92 UL 96

UL 96A UL 98 UL 103 UL 123 UL 130 UL 142 UL 147 UL 153 UL 154 UL 174 UL 181 UL 181B UL 187 UL 197 UL 198C UL 198E UL 198H UL 207 UL 209 UL 214 UL 228 UL 246 UL 250 UL 262 UL 296

UL 298 UL 299 UL 312 UL 330 UL 343 UL 353 UL 360 UL 372 UL 378 UL 399 UL 401 UL 404 UL 412 UL 414 UL 427 UL 429 UL 430 UL 437 UL 441 UL 467 UL 471 UL 474 UL 484 UL 486C

UL 489 UL 496 UL 497B UL 498 UL 499 UL 506 UL 507 UL 508 UL 510 UL 511 UL 512 UL 514A UL 514B UL 521 UL 542 UL 544 UL 555 UL 555S UL 558 UL 561 UL 574 UL 580 UL 586 UL 621 UL 634 UL 636

UL 639 UL 644 UL 651 UL 651A UL 664 UL 674 UL 681 UL 687 UL 698 UL 705 UL 710 UL 711 UL 719 UL 723 UL 726 UL 727 UL 731 UL 732 UL 749 UL 752 UL 763 UL 768 UL 773 UL 773A UL 778 UL 779

UL 781 UL 783 UL 786 UL 789 UL 790 UL 795 UL 797 UL 817 UL 842 UL 844 UL 845 UL 854 UL 857 UL 858 UL 863 UL 864 UL 867 UL 869A UL 870 UL 884 UL 886 UL 891 UL 894 UL 900 UL 910 UL 916

UL 921 UL 943 UL 977 UL 984 UL 987 UL 997 UL 998 UL 1004 UL 1008 UL 1010 UL 1012 UL 1017 UL 1029 UL 1030 UL 1034 UL 1042 UL 1053 UL 1067 UL 1076 UL 1077 UL 1086 UL 1093 UL 1196 UL 1206

UL 1236 UL 1244 UL 1262 UL 1283 UL 1316 UL 1414 UL 1414 UL 1437 UL 1479 UL 1559 UL 1569 UL 1570 UL 1571 UL 1572 UL 1610 UL 1666 UL 1776 UL 1950 UL 1995 UL 60950 ANSI Z79.8 ANSI Z79.9 ANSI Z79.10 ANSI Z89.1 ANSI Z358.1

API STD 2550 ASA S1.10 ASME A39.1 ASME A39.1A ASME A39.1B ASME B16.32 ASME B40.1 ASME MH1.4.1M ASME Y14.26M ASME B18.27 ASTM A 1 ASTM A 27/A 27M ASTM A 36/A 36M REV A ASTM A 47/A 47M ASTM A 48 REV A ASTM A 67 ASTM A 82 REV A ASTM A 90/A 90M ASTM A 105/A 105M ASTM A 106 ASTM A 108 ASTM A 116 ASTM A 123/A 123M ASTM A 125 ASTM A 126 ASTM A 134 ASTM A 139 ASTM A 143 ASTM A 153/A 153M

ASTM A 159 ASTM A 167 ASTM A 176 ASTM A 181/A 181M ASTM A 182/A 182M ASTM A 183 ASTM A 185 ASTM A 193/A 193M REV A ASTM A 194/A 194M ASTM A 197/A 197M ASTM A 203/A 203M ASTM A 204/A 204M ASTM A 213/A 213M ASTM A 214/A 214M ASTM A 216/A 216M ASTM A 217/A 217M ASTM A 220/A 220M ASTM A 227/A 227M ASTM A 228/A 228M ASTM A 230/A 230M ASTM A 231/A 231M ASTM A 232/A 232M ASTM A 239

ASTM A 242/A 242M REV A ASTM A 247 ASTM A 249/A 249M ASTM A 252 ASTM A 254 ASTM A 262 ASTM A 265 REV A ASTM A 268/A 268M ASTM A 276 REV A ASTM A 283/A 283M ASTM A 295 ASTM A 302/A 302M ASTM A 307 ASTM A 308 ASTM A 309 ASTM A 313/A 313M ASTM A 314 ASTM A 320/A 320M ASTM A 322 ASTM A 325 ASTM A 325M ASTM A 327 ASTM A 328/A 328M ASTM A 333/A 333M ASTM A 335/A 335M ASTM A 336/A 336M ASTM A 342/A 342M

ASTM A 351/A 351M ASTM A 352/A 352M ASTM A 354 ASTM A 366/A 366M ASTM A 380 ASTM A 385 ASTM A 387/A 387M ABMA 16.1 ABMA 16.2 AIA/NAS NA0077 AIA/NAS NA0078 AIA/NAS NA0079 AIA/NAS NA0080 AIA/NAS NA0081 AIA/NAS NA0082 AIA/NAS NA0083 AIA/NAS NA0084 AIA/NAS NA0095 AIA/NAS NA0096 AIA/NAS NAS 526 AIA/NAS NAS 527 AIA/NAS NAS 663 AIA/NAS NAS 664

AIA/NAS NAS 665 AIA/NAS NAS 666 AIA/NAS NAS 667 AIA/NAS NAS 668 AIA/NAS NAS 1579 AIA/NAS NAS 1582 AIA/NAS NASM21 AIA/NAS NASM23 AIA/NAS NASM24 AIA/NAS NASM25 AIA/NAS NASM26 AIA/NAS NASM27 AIA/NAS NASM28 AIA/NAS NASM29 AIA/NAS NASM30 AIA/NAS NASM32 AIA/NAS NASM34 AIA/NAS NASM37 AIA/NAS NASM63540 AIA/NAS NASM22 ANSI A14.1 ANSI C78.40 ANSI C136.3

ANSI C136.10 ANSI C136.13 ANSI IT3.604 ANSI PH1.30 ANSI PH1.33 ANSI PH3.69 ANSI PH3.101 ANSI PH3.601 ANSI PH4.29 ANSI X3.206 ASTM A 389/A 389M ASTM A 395/A 395M ASTM A 403/A 403M REV B ASTM A 411 ASTM A 413/A 413M ASTM A 421/A 421M REV A ASTM A 424 ASTM A 428/A 428M ASTM A 434 REV A ASTM A 436 ASTM A 439 ASTM A 449 ASTM A 463/A 463M ASTM A 475 ASTM A 478

ASTM A 479/A 479M ASTM A 480/A 480M ASTM A 484/A 484M ASTM A 485 ASTM A 487/A 487M ASTM A 488/A 488M ASTM A 489 ASTM A 490 ASTM A 493 ASTM A 494/A 494M ASTM A 496 REV A ASTM A 497 ASTM A 499 ASTM A 502 ASTM A 506 ASTM A 508/A 508M ASTM A 510 ASTM A 510M ASTM A 511 ASTM A 512 ASTM A 513 ASTM A 514/A 514M REV A ASTM A 517/A 517M ASTM A 518/A 518M ASTM A 519 ASTM A 520 ASTM A 532/A 532M REV A

ASTM A 533/A 533M ASTM A 534 ASTM A 535 ASTM A 536 ASTM A 537/A 537M ASTM A 555/A 555M ASTM A 561 ASTM A 563 ASTM A 563M ASTM A 564/A 564M ASTM A 565 ASTM A 568/A 568M REV B ASTM A 569/A 569M ASTM A 570/A 570M ASTM A 574 ASTM A 575 ASTM A 576 REV B ASTM A 578/A 578M ASTM A 580/A 580M ASTM A 581/A 581M REV B ASTM A 586 ASTM A 589 ASTM A 591/A 591M ASTM A 595 ASTM A 597 ASTM A 603

ASTM A 606 ASTM A 611 ASTM A 620/A 620M ASTM A 622/A 622M ASTM A 623 ASTM A 623M ASTM A 624/A 624M ASTM A 625/A 625M ASTM A 626/A 626M ASTM A 627 ASTM A 630 ASTM A 633/A 633M REV A ASTM A 635/A 635M ASTM A 641/A 641M ASTM A 644 ASTM A 659/A 659M ASTM A 663/A 663M ASTM A 666 ASTM A 675/A 675M REV A ASTM A 681 ASTM A 682/A 682M ASTM A 684/A 684M ASTM A 686 ASTM A 687

ASTM A 690/A 690M REV A ASTM A 693 ASTM A 695 REV B ASTM A 696 REV A ASTM A 700 ASTM A 703/A 703M ASTM A 711 ASTM A 739 REV A ASTM A 740 ASTM A 742/A 742M ASTM A 743/A 743M REV A ASTM A 744/A 744M ASTM A 746 ASTM A 749/A 749M ASTM A 751 ASTM A 757/A 757M ASTM A 760/A 760M ASTM A 762/A 762M ASTM A 767/A 767M REV B ASTM A 768 ASTM A 770/A 770M ASTM A 775/A 775M ASTM A 780

ASTM A 792/A 792M ASTM A 793 ASTM A 798/A 798M ASTM A 809 ASTM A 818 ASTM A 829/A 829M ASTM A 849 ASTM A 853 ASTM A 861 ASTM A 880 ASTM A 907/A 907M ASTM A 908 ASTM A 967 ASTM B 633 ASTM B 2 ASTM B 5 ASTM B 8 ASTM B 19 ASTM B 22 ASTM B 29 ASTM B 33 ASTM B 43 ASTM B 49 ASTM B 63 ASTM B 66 ASTM B 67 REV A ASTM B 75 ASTM B 75M ASTM B 80 ASTM B 85 ASTM B 88M ASTM B 90/B 90M ASTM B 91 ASTM B 96/B 96M

ASTM B 98/B 98M ASTM B 101 ASTM B 107/B 107M ASTM B 117 ASTM B 124/B 124M ASTM B 134 ASTM B 136 ASTM B 137 ASTM B 138 ASTM B 150 ASTM B 150M REV A ASTM B 152M REV A ASTM B 153 ASTM B 154 ASTM B 162 ASTM B 163 ASTM B 164 ASTM B 170 ASTM B 179 ASTM B 183 ASTM B 189 ASTM B 193 ASTM B 194 ASTM B 199 ASTM B 200 ASTM B 206/B 206M ASTM B 209 ASTM B 210 ASTM B 210M ASTM B 211 ASTM B 211M REV A

ASTM B 212 ASTM B 213 ASTM B 214 ASTM B 221 ASTM B 221M ASTM B 227 ASTM B 228 ASTM B 230/B 230M ASTM B 231/B 231M ASTM B 236 ASTM B 236M ASTM B 244 ASTM B 246 ASTM B 247 ASTM B 250 ASTM B 251 ASTM B 251M ASTM B 253 ASTM B 254 ASTM B 258 ASTM B 265 ASTM B 275 ASTM B 281 ASTM B 283 REV A ASTM B 298 ASTM B 301/B 301M ASTM B 302 ASTM B 306 ASTM B 308/B 308M

ASTM B 311 ASTM B 313/B 313M ASTM B 315 ASTM B 316/B 316M ASTM B 317 ASTM B 322 ASTM B 329 ASTM B 333 ASTM B 335 ASTM B 338 ASTM B 344 ASTM B 345/B 345M ASTM B 348 ASTM B 355 ASTM B 359 ASTM B 361 ASTM B 367 ASTM B 368 ASTM B 369 ASTM B 370 ASTM B 371 ASTM B 373 ASTM B 397 ASTM B 403 ASTM B 411 ASTM B 422 ASTM B 424 REV A ASTM B 427 REV A ASTM B 429 ASTM B 430 ASTM B 447 ASTM B 449

ASTM B 452 ASTM B 456 ASTM B 463 ASTM B 465 ASTM B 472 ASTM B 476 ASTM B 483/B 483M ASTM B 487 ASTM B 488 ASTM B 491/B 491M ASTM B 499 ASTM B 501 ASTM B 504 ASTM B 508 ASTM B 520 ASTM B 522 ASTM B 530 ASTM B 540 ASTM B 541 ASTM B 543M ASTM B 547/B 547M ASTM B 557 ASTM B 563 ASTM B 564 REV A ASTM B 566 ASTM B 567 ASTM B 568 ASTM B 578 ASTM B 579 ASTM B 574 REV A

ASTM B 575 REV A ASTM B 580 ASTM B 584 ASTM B 591 REV A ASTM B 593 ASTM B 596 ASTM B 597 ASTM B 598 ASTM B 609/B 609M ASTM B 617 ASTM B 624 ASTM B 628 ASTM B 632/B 632M ASTM B 637 ASTM B 640 ASTM B 643 ASTM B 645 ASTM B 646 ASTM B 650 ASTM B 656 ASTM B 660 ASTM B 661 ASTM B 666/B 666M ASTM B 683 ASTM B 684 ASTM B 685 ASTM B 687 ASTM B 689 ASTM B 696 ASTM B 731 ASTM B 733 ASTM B 740 ASTM B 742 ASTM B 745/B 745M ASTM B 763 ASTM B 766

ASTM B 768 ASTM B 788/B 788M ASTM B 824 ASTM C 425 ASTM C 4 ASTM C 14 ASTM C 27 ASTM C 28/C 28M ASTM C 29/C 29M ASTM C 31/C 31M ASTM C 32 ASTM C 34 ASTM C 35 ASTM C 37/C 37M ASTM C 40 ASTM C 42/C 42M ASTM C 59/C 59M ASTM C 61 ASTM C 61/C 61M ASTM C 67 ASTM C 73 REV A ASTM C 76 ASTM C 76M ASTM C 79/C 79M ASTM C 87 ASTM C 88 REV A ASTM C 91 ASTM C 94/C 94M ASTM C 99

ASTM C 109/C 109M ASTM C 113 ASTM C 116 ASTM C 117 ASTM C 119 ASTM C 120 ASTM C 121 ASTM C 123 ASTM C 125 REV A ASTM C 126 ASTM C 133 ASTM C 136 ASTM C 138/C 138M REV A ASTM C 142 ASTM C 143/C 143M ASTM C 144 ASTM C 148 ASTM C 156 ASTM C 157/C 157M ASTM C 159 ASTM C 162 ASTM C 167 ASTM C 170 ASTM C 171 REV A ASTM C 172 ASTM C 173/C 173M ASTM C 174/C 174M ASTM C 183 ASTM C 188 ASTM C 192/C 192M ASTM C 196

ASTM C 206 ASTM C 209 ASTM C 215 ASTM C 225 ASTM C 227 REV A ASTM C 236 ASTM C 241 ASTM C 260 ASTM C 267 ASTM C 270 ASTM C 273 ASTM C 282 ASTM C 286 ASTM C 289 ASTM C 293 ASTM C 294 ASTM C 297 ASTM C 301 ASTM C 302 ASTM C 303 ASTM C 307 ASTM C 309 REV A ASTM C 315 ASTM C 317/C 317M ASTM C 318/C 318M ASTM C 321 ASTM C 330 ASTM C 332 ASTM C 335 ASTM C 338 ASTM C 356 ASTM C 361 ASTM C 365 ASTM C 366 ASTM C 390 ASTM C 393

ASTM C 395 ASTM C 403/C 403M ASTM C 411 ASTM C 412 ASTM C 412M ASTM C 413 ASTM C 414 ASTM C 418 ASTM C 426 ASTM C 443 ASTM C 443M ASTM C 444M ASTM C 470/C 470M ASTM C 472 ASTM C 478 ASTM C 478M ASTM C 481 ASTM C 494/C 494M REV A ASTM C 495 REV A ASTM C 496 ASTM C 497M ASTM C 499 ASTM C 506 ASTM C 506M ASTM C 507 ASTM C 509 ASTM C 513 ASTM C 514 ASTM C 516

ASTM C 518 ASTM C 520 ASTM C 534 ASTM C 542 ASTM C 549 ASTM C 550 ASTM C 552 ASTM C 557 ASTM C 561 ASTM C 562 ASTM C 564 ASTM C 566 ASTM C 567 ASTM C 568 ASTM C 570 ASTM C 580 ASTM C 581 ASTM C 582 ASTM C 586 ASTM C 587 ASTM C 588/C 588M ASTM C 591 ASTM C 597 ASTM C 610 ASTM C 613/C 613M ASTM C 616 ASTM C 617 ASTM C 630/C 630M ASTM C 633 ASTM C 635 ASTM C 636 ASTM C 637 REV A ASTM C 638

ASTM C 639 ASTM C 641 ASTM C 651 ASTM C 654M ASTM C 655 ASTM C 655M ASTM C 658 ASTM C 661 ASTM C 663 ASTM C 665 ASTM C 666 ASTM C 669 ASTM C 670 ASTM C 679 ASTM C 695 ASTM C 700 ASTM C 702 ASTM C 721 ASTM C 725 ASTM C 732 ASTM C 739 ASTM C 764 ASTM C 778 ASTM C 780 ASTM C 792 ASTM C 793 ASTM C 794 ASTM C 796 ASTM C 800 ASTM C 805 ASTM C 811 ASTM C 816 ASTM C 822 ASTM C 823 ASTM C 840

ASTM C 841 ASTM C 843 ASTM C 844 ASTM C 847 ASTM C 864 ASTM C 865 ASTM C 873 ASTM C 883 ASTM C 884/C 884M ASTM C 913 ASTM C 916 ASTM C 921 ASTM C 923 ASTM C 930 ASTM C 931/C 931M ASTM C 932 REV A ASTM C 937 ASTM C 939 ASTM C 942 ASTM C 954 ASTM C 964 ASTM C 966 ASTM C 977 ASTM C 984 ASTM C 989 ASTM C 995 ASTM C 1002 ASTM C 1015 ASTM C 1018 ASTM C 1029 ASTM C 1036 ASTM C 1047

ASTM C 1048 REV B ASTM C 1063 ASTM C 1064/C 1064M ASTM C 1085 ASTM C 1107 ASTM C 1116 ASTM C 1289 ASTM D 543 ASTM D 1535 ASTM D 1578 ASTM D 2105 ASTM D 2310 ASTM D 2992 ASTM D 2996 ASTM D 2997 ASTM D 3517 ASTM D 4 ASTM D 5 ASTM D 6 ASTM D 12 ASTM D 13 ASTM D 16 ASTM D 20 ASTM D 29 ASTM D 34 ASTM D 36 ASTM D 41 ASTM D 43 ASTM D 50 ASTM D 71 ASTM D 75 ASTM D 79

ASTM D 86 REV A ASTM D 91 ASTM D 92 REV A ASTM D 93 ASTM D 95 ASTM D 97 REV A ASTM D 113 ASTM D 116 ASTM D 117 ASTM D 123 REV B ASTM D 126 ASTM D 127 ASTM D 128 ASTM D 129 ASTM D 130 ASTM D 149 REV A ASTM D 150 ASTM D 153 ASTM D 173 REV B ASTM D 178 ASTM D 185 ASTM D 187 ASTM D 189 ASTM D 204 ASTM D 209 ASTM D 217 ASTM D 224 ASTM D 225 REV A

ASTM D 227 REV A ASTM D 229 ASTM D 233 ASTM D 249 ASTM D 260 ASTM D 261 ASTM D 268 ASTM D 276 REV A ASTM D 280 ASTM D 281 ASTM D 305 ASTM D 312 ASTM D 322 ASTM D 329 ASTM D 330 ASTM D 331 ASTM D 348 ASTM D 350 ASTM D 351 ASTM D 358 ASTM D 369 ASTM D 371 ASTM D 374 ASTM D 380 ASTM D 381 ASTM D 387 ASTM D 390 ASTM D 395 ASTM D 409 ASTM D 412 REV A ASTM D 413 ASTM D 418 ASTM D 422 ASTM D 430 ASTM D 444

ASTM D 449 ASTM D 453 ASTM D 454 ASTM D 456 ASTM D 460 ASTM D 461 ASTM D 473 ASTM D 476 ASTM D 482 REV A ASTM D 494 ASTM D 496 ASTM D 498 ASTM D 511 ASTM D 512 ASTM D 515 ASTM D 517 ASTM D 518 ASTM D 520 ASTM D 522 REV A ASTM D 523 ASTM D 524 ASTM D 529 ASTM D 541 ASTM D 545 ASTM D 546 ASTM D 555 ASTM D 559 ASTM D 563 ASTM D 565 ASTM D 566 ASTM D 573 ASTM D 575 ASTM D 578 ASTM D 579

ASTM D 595 ASTM D 607 ASTM D 609 ASTM D 610 ASTM D 612 ASTM D 617 ASTM D 621 ASTM D 622 ASTM D 629 ASTM D 633 ASTM D 635 ASTM D 637 ASTM D 638M ASTM D 642 ASTM D 644 ASTM D 646 ASTM D 647 REV A ASTM D 665 ASTM D 671 ASTM D 673 REV A ASTM D 685 ASTM D 689 REV A ASTM D 692 ASTM D 693 ASTM D 695 ASTM D 695M ASTM D 696 ASTM D 698 REV A ASTM D 704 ASTM D 706 ASTM D 707 ASTM D 709

ASTM D 710 ASTM D 711 ASTM D 714 ASTM D 720 ASTM D 724 ASTM D 726 ASTM D 729 ASTM D 732 ASTM D 740 ASTM D 746 ASTM D 747 ASTM D 751 ASTM D 756 ASTM D 774/D 774M ASTM D 779 ASTM D 782 ASTM D 785 ASTM D 788 ASTM D 790M ASTM D 797 ASTM D 808 ASTM D 823 ASTM D 828 ASTM D 832 ASTM D 853 ASTM D 854 ASTM D 858 ASTM D 859 ASTM D 865 ASTM D 869 ASTM D 871 ASTM D 873 REV A ASTM D 874

ASTM D 876 ASTM D 878 REV A ASTM D 883 ASTM D 888 ASTM D 891 ASTM D 893 ASTM D 895 ASTM D 896 ASTM D 899 ASTM D 905 ASTM D 906 ASTM D 924 ASTM D 926 ASTM D 929 ASTM D 938 ASTM D 942 ASTM D 943 ASTM D 945 ASTM D 946 ASTM D 950 ASTM D 951 ASTM D 953 ASTM D 968 ASTM D 969 ASTM D 971 REV A ASTM D 976 ASTM D 977 ASTM D 979 ASTM D 991 ASTM D 995 REV B ASTM D 996 ASTM D 1000 ASTM D 1002

ASTM D 1003 ASTM D 1004 REV A ASTM D 1005 ASTM D 1006 ASTM D 1013 ASTM D 1014 ASTM D 1018 ASTM D 1030 ASTM D 1043 ASTM D 1044 ASTM D 1047 ASTM D 1048 ASTM D 1049 ASTM D 1050 ASTM D 1052 ASTM D 1053 REV A ASTM D 1054 ASTM D 1055 ASTM D 1056 ASTM D 1059 ASTM D 1067 ASTM D 1068 ASTM D 1076 ASTM D 1078 ASTM D 1085 ASTM D 1117 ASTM D 1120 ASTM D 1121 ASTM D 1122 REV A ASTM D 1123 ASTM D 1125 ASTM D 1126 ASTM D 1133 ASTM D 1135 ASTM D 1139 ASTM D 1140

ASTM D 1143 ASTM D 1146 ASTM D 1151 ASTM D 1153 ASTM D 1160 ASTM D 1169 ASTM D 1171 ASTM D 1172 ASTM D 1176 ASTM D 1179 ASTM D 1183 ASTM D 1184 ASTM D 1185 REV A ASTM D 1188 ASTM D 1193 ASTM D 1194 ASTM D 1199 ASTM D 1200 ASTM D 1203 ASTM D 1208 ASTM D 1209 ASTM D 1210 ASTM D 1214 ASTM D 1217 ASTM D 1218 ASTM D 1227 ASTM D 1229 ASTM D 1242 REV A ASTM D 1246 ASTM D 1250 ASTM D 1250 VOL I ASTM D 1250 VOL II ASTM D 1250 VOL IV

ASTM D 1250 VOL VI ASTM D 1250 VOL VII ASTM D 1252 ASTM D 1259 ASTM D 1263 ASTM D 1266 ASTM D 1272 ASTM D 1275 REV A ASTM D 1250 VOL VIII ASTM D 1250 VOL IX ASTM D 1250 VOL XIII ASTM D 1287 ASTM D 1293 ASTM D 1296 ASTM D 1298 ASTM D 1306 ASTM D 1308 ASTM D 1310 ASTM D 1330 ASTM D 1335 ASTM D 1348 ASTM D 1349 ASTM D 1353 ASTM D 1364 ASTM D 1366 ASTM D 1386 ASTM D 1388 ASTM D 1394 ASTM D 1397 ASTM D 1398 ASTM D 1415 ASTM D 1416

ASTM D 1418 REV A ASTM D 1423 ASTM D 1424 ASTM D 1426 ASTM D 1435 ASTM D 1448 ASTM D 1456 ASTM D 1457 ASTM D 1458 ASTM D 1468 ASTM D 1474 ASTM D 1475 ASTM D 1483 ASTM D 1488 ASTM D 1489 ASTM D 1493 ASTM D 1494 ASTM D 1499 ASTM D 1500 ASTM D 1505 ASTM D 1506 ASTM D 1509 ASTM D 1510 ASTM D 1512 ASTM D 1513 REV A ASTM D 1516 ASTM D 1525 ASTM D 1527 ASTM D 1542 ASTM D 1544 ASTM D 1545 ASTM D 1547 ASTM D 1548 ASTM D 1555 ASTM D 1556 ASTM D 1559

ASTM D 1565 ASTM D 1577 ASTM D 1579 ASTM D 1586 ASTM D 1596 ASTM D 1598 ASTM D 1599 ASTM D 1600 ASTM D 1603 ASTM D 1607 ASTM D 1608 ASTM D 1611 ASTM D 1613 ASTM D 1614 ASTM D 1617 ASTM D 1619 ASTM D 1621 ASTM D 1623 ASTM D 1630 ASTM D 1631 ASTM D 1632 ASTM D 1633 ASTM D 1640 ASTM D 1642 ASTM D 1647 ASTM D 1652 ASTM D 1654 ASTM D 1667 ASTM D 1668 REV A ASTM D 1675 ASTM D 1688 ASTM D 1704/D 1704M ASTM D 1708 ASTM D 1709

ASTM D 1718 ASTM D 1719 ASTM D 1722 ASTM D 1726 ASTM D 1735 ASTM D 1742 ASTM D 1744 ASTM D 1746 ASTM D 1747 ASTM D 1751 ASTM D 1752 ASTM D 1779 ASTM D 1785 ASTM D 1796 ASTM D 1799 ASTM D 1813 ASTM D 1824 ASTM D 1840 ASTM D 1845 ASTM D 1849 ASTM D 1854 ASTM D 1863 ASTM D 1864 ASTM D 1868 ASTM D 1869 ASTM D 1870 ASTM D 1875 ASTM D 1876 ASTM D 1881 ASTM D 1883 ASTM D 1889 ASTM D 1894 ASTM D 1895 ASTM D 1898 ASTM D 1907

ASTM D 1917 ASTM D 1921 ASTM D 1922 REV A ASTM D 1925 ASTM D 1927 ASTM D 1928 ASTM D 1943 ASTM D 1947 ASTM D 1950 ASTM D 1951 ASTM D 1952 ASTM D 1954 ASTM D 1957 ASTM D 1960 ASTM D 1962 ASTM D 1964 ASTM D 1965 ASTM D 1968 REV A ASTM D 1974 ASTM D 1980 ASTM D 1983 ASTM D 2000 ASTM D 2010/D 2010M ASTM D 2013 REV A ASTM D 2015 ASTM D 2022 ASTM D 2024 ASTM D 2026 ASTM D 2027 ASTM D 2029 ASTM D 2041 ASTM D 2042

ASTM D 2060 ASTM D 2069 ASTM D 2073 ASTM D 2091 ASTM D 2099 ASTM D 2103 ASTM D 2104 ASTM D 2109 ASTM D 2111 ASTM D 2112 ASTM D 2113 ASTM D 2115 ASTM D 2116 ASTM D 2122 ASTM D 2136 ASTM D 2137 ASTM D 2152 ASTM D 2156 ASTM D 2161 ASTM D 2162 ASTM D 2165 ASTM D 2167 ASTM D 2168 ASTM D 2170 ASTM D 2171 ASTM D 2176 REV A ASTM D 2194 ASTM D 2196 ASTM D 2197 ASTM D 2207 ASTM D 2208 ASTM D 2209 ASTM D 2210 ASTM D 2212

ASTM D 2213 ASTM D 2217 ASTM D 2221 ASTM D 2231 ASTM D 2235 ASTM D 2243 ASTM D 2244 ASTM D 2245 ASTM D 2247 ASTM D 2248 REV A ASTM D 2251 ASTM D 2257 ASTM D 2258 ASTM D 2262 ASTM D 2266 ASTM D 2268 ASTM D 2270 ASTM D 2272 ASTM D 2273 ASTM D 2276 ASTM D 2282 ASTM D 2290 ASTM D 2303 ASTM D 2321 ASTM D 2322 ASTM D 2330 ASTM D 2343 ASTM D 2344/D 2344M ASTM D 2346 ASTM D 2350 ASTM D 2360

ASTM D 2369 ASTM D 2370 ASTM D 2371 ASTM D 2372 ASTM D 2382 ASTM D 2392 ASTM D 2393 ASTM D 2397 ASTM D 2412 REV A ASTM D 2417 ASTM D 2419 ASTM D 2440 ASTM D 2444 ASTM D 2447 ASTM D 2455 ASTM D 2457 ASTM D 2464 ASTM D 2466 ASTM D 2467 ASTM D 2472 ASTM D 2475 ASTM D 2481 ASTM D 2486 ASTM D 2488 ASTM D 2492 ASTM D 2511 ASTM D 2512 ASTM D 2517 ASTM D 2520 ASTM D 2532 ASTM D 2533 ASTM D 2556 REV A ASTM D 2563 ASTM D 2565 ASTM D 2572

ASTM D 2573 ASTM D 2579 ASTM D 2580 ASTM D 2582 ASTM D 2584 ASTM D 2586 ASTM D 2595 ASTM D 2596 ASTM D 2609 ASTM D 2617 ASTM D 2622 ASTM D 2625 ASTM D 2628 ASTM D 2632 ASTM D 2649 ASTM D 2651 ASTM D 2654 REV A ASTM D 2661 ASTM D 2662 REV A ASTM D 2665 ASTM D 2666 REV A ASTM D 2670 ASTM D 2671 ASTM D 2672 REV A ASTM D 2683 ASTM D 2697 ASTM D 2698 ASTM D 2702 ASTM D 2709 ASTM D 2714

ASTM D 2724 ASTM D 2729 REV A ASTM D 2734 ASTM D 2737 ASTM D 2740 ASTM D 2742 ASTM D 2751 REV A ASTM D 2774 ASTM D 2794 ASTM D 2800 ASTM D 2802 ASTM D 2803 ASTM D 2804 ASTM D 2807 ASTM D 2810 ASTM D 2813 ASTM D 2821 ASTM D 2822 ASTM D 2824 ASTM D 2835 ASTM D 2837 REV A ASTM D 2842 ASTM D 2843 ASTM D 2846/D 2846M ASTM D 2852 ASTM D 2855 ASTM D 2856 ASTM D 2860/D 2860M ASTM D 2863 ASTM D 2867

ASTM D 2868 ASTM D 2885 ASTM D 2887 ASTM D 2896 ASTM D 2914 ASTM D 2919 ASTM D 2922 ASTM D 2934 ASTM D 2935 ASTM D 2939 ASTM D 2940 ASTM D 2941 ASTM D 2942 ASTM D 2950 ASTM D 2989 ASTM D 2990 ASTM D 2995 ASTM D 3000 REV A ASTM D 3014 ASTM D 3020 ASTM D 3029 ASTM D 3032 ASTM D 3034 ASTM D 3037 ASTM D 3039/D 3039M ASTM D 3045 ASTM D 3061 ASTM D 3064 ASTM D 3066 ASTM D 3067 ASTM D 3068 ASTM D 3069 ASTM D 3070

ASTM D 3077 ASTM D 3078 ASTM D 3083 ASTM D 3091 ASTM D 3092 ASTM D 3097 ASTM D 3107 ASTM D 3120 ASTM D 3122 ASTM D 3137 ASTM D 3138 ASTM D 3139 ASTM D 3162 ASTM D 3166 ASTM D 3168 ASTM D 3171 ASTM D 3174 ASTM D 3175 ASTM D 3183 ASTM D 3212 REV A ASTM D 3222 ASTM D 3227 ASTM D 3228 ASTM D 3230 ASTM D 3231 ASTM D 3240 ASTM D 3242 ASTM D 3249 ASTM D 3254 ASTM D 3257 ASTM D 3261 ASTM D 3268 ASTM D 3272

ASTM D 3274 ASTM D 3278 ASTM D 3280 ASTM D 3282 ASTM D 3286 ASTM D 3293 REV A ASTM D 3308 ASTM D 3309 REV A ASTM D 3320 ASTM D 3329 ASTM D 3330/D 3330M ASTM D 3335 REV A ASTM D 3336 ASTM D 3343 ASTM D 3363 ASTM D 3369 ASTM D 3373 ASTM D 3374 ASTM D 3379 ASTM D 3381 ASTM D 3385 ASTM D 3389 ASTM D 3400 ASTM D 3401 ASTM D 3410/D 3410M ASTM D 3417 ASTM D 3432 ASTM D 3441 ASTM D 3443 ASTM D 3446 ASTM D 3447

ASTM D 3452 ASTM D 3462 ASTM D 3479/D 3479M ASTM D 3482 ASTM D 3492 ASTM D 3495 ASTM D 3500 ASTM D 3518/D 3518M ASTM D 3529/D 3529M ASTM D 3530/D 3530M ASTM D 3531 ASTM D 3532 ASTM D 3545 ASTM D 3551 ASTM D 3552 ASTM D 3559 ASTM D 3567 ASTM D 3574 ASTM D 3595 ASTM D 3611 ASTM D 3617 ASTM D 3623 REV A ASTM D 3624 REV A ASTM D 3634 ASTM D 3656 ASTM D 3691 REV A ASTM D 3701 REV A ASTM D 3703 ASTM D 3715/D 3715M ASTM D 3718 REV A ASTM D 3725

ASTM D 3732 ASTM D 3734 ASTM D 3738 ASTM D 3759/D 3759M ASTM D 3761 ASTM D 3772 ASTM D 3773 ASTM D 3774 ASTM D 3775 ASTM D 3786 ASTM D 3787 ASTM D 3792 ASTM D 3800 ASTM D 3811/D 3811M ASTM D 3816/D 3816M ASTM D 3833/D 3833M ASTM D 3839 REV A ASTM D 3846 ASTM D 3887 ASTM D 3889/D 3889M ASTM D 3892 ASTM D 3905 ASTM D 3910 ASTM D 3916 ASTM D 3935 ASTM D 3941 ASTM D 3948 REV A ASTM D 3950 ASTM D 3953 ASTM D 4000 ASTM D 4004

ASTM D 4006 ASTM D 4018 ASTM D 4019 REV A ASTM D 4022 ASTM D 4047 ASTM D 4048 ASTM D 4052 ASTM D 4057 ASTM D 4060 ASTM D 4065 ASTM D 4066 ASTM D 4067 ASTM D 4075 ASTM D 4083 ASTM D 4092 ASTM D 4099 ASTM D 4101 ASTM D 4102 ASTM D 4126 ASTM D 4157 ASTM D 4169 ASTM D 4172 ASTM D 4175 ASTM D 4177 ASTM D 4181 ASTM D 4203 ASTM D 4214 ASTM D 4216 ASTM D 4225 ASTM D 4239 ASTM D 4253 ASTM D 4254

ASTM D 4255/D 4255M ASTM D 4263 ASTM D 4268 ASTM D 4289 ASTM D 4294 ASTM D 4300 REV A ASTM D 4317 ASTM D 4318 ASTM D 4325 ASTM D 4338 ASTM D 4355 ASTM D 4377 ASTM D 4402 ASTM D 4417 ASTM D 4434 ASTM D 4442 ASTM D 4444 ASTM D 4473 REV A ASTM D 4479 ASTM D 4500 ASTM D 4507 REV A ASTM D 4530 ASTM D 4615 ASTM D 4617 ASTM D 4624 ASTM D 4628 ASTM D 4629 ASTM D 4632 ASTM D 4634 ASTM D 4636 ASTM D 4637

ASTM D 4643 ASTM D 4653 ASTM D 4655 ASTM D 4673 ASTM D 4675 ASTM D 4683 ASTM D 4684 ASTM D 4690 ASTM D 4701 ASTM D 4704 ASTM D 4705 ASTM D 4727/D 4727M ASTM D 4737 REV A ASTM D 4745 ASTM D 4749 ASTM D 4751 REV A ASTM D 4783 REV A ASTM D 4791 ASTM D 4802 ASTM D 4807 ASTM D 4808 ASTM D 4814 ASTM D 4815 ASTM D 4833 ASTM D 4857 ASTM D 4858 ASTM D 4859 ASTM D 4892

ASTM D 4897 ASTM D 4898 ASTM D 4925 ASTM D 4927 ASTM D 4928 ASTM D 4951 ASTM D 4952 ASTM D 4985 REV A ASTM D 5006 ASTM D 5034 ASTM D 5035 ASTM D 5040 ASTM D 5052/D 5052M ASTM D 5053 ASTM D 5059 ASTM D 5105 ASTM D 5151 ASTM D 5185 ASTM D 5191 ASTM D 5204 ASTM D 5205 ASTM D 5213 ASTM D 5229/D 5229M ASTM D 5300 ASTM D 5304 ASTM D 5436 ASTM D 5445 ASTM D 5452 ASTM D 5486/D 5486M REV A

ASTM D 5632 ASTM D 5727 ASTM D 5948 ASTM D 6012 ASTM D 6017 ASTM D 6020 ASTM D 6076 ASTM D 6107 ASTM D 6183 ASTM D 6199 ASTM E 3 ASTM E 6 ASTM E 7 ASTM E 18 ASTM E 21 ASTM E 23 ASTM E 28 ASTM E 29 REV A ASTM E 30 ASTM E 34 ASTM E 45 ASTM E 53 ASTM E 59 ASTM E 62 ASTM E 70 ASTM E 75 ASTM E 77 ASTM E 84 ASTM E 88 ASTM E 90 ASTM E 96 ASTM E 97 ASTM E 100 ASTM E 103 ASTM E 108

ASTM E 110 ASTM E 114 ASTM E 119 REV A ASTM E 120 ASTM E 127 ASTM E 132 ASTM E 136 ASTM E 139 ASTM E 142 ASTM E 145 ASTM E 152 REV A ASTM E 162 ASTM E 167 ASTM E 168 ASTM E 171 ASTM E 175 ASTM E 177 REV A ASTM E 186 ASTM E 191 ASTM E 193 ASTM E 202 ASTM E 203 ASTM E 214 ASTM E 220 ASTM E 223 ASTM E 224 ASTM E 227 ASTM E 228 ASTM E 243 ASTM E 248 ASTM E 251 ASTM E 252 ASTM E 256

ASTM E 257 ASTM E 263 ASTM E 264 ASTM E 265 ASTM E 270 ASTM E 273 ASTM E 280 ASTM E 283 ASTM E 290 REV A ASTM E 291 ASTM E 300 ASTM E 308 ASTM E 309 ASTM E 310 ASTM E 324 ASTM E 330 ASTM E 335 ASTM E 336 ASTM E 338 ASTM E 340 ASTM E 345 ASTM E 357 ASTM E 358 ASTM E 359 ASTM E 376 ASTM E 384 ASTM E 390 ASTM E 399 ASTM E 407 ASTM E 413 ASTM E 424 ASTM E 428 ASTM E 437 ASTM E 443

ASTM E 447 ASTM E 449 ASTM E 456 ASTM E 458 ASTM E 462 ASTM E 478 REV A ASTM E 488 ASTM E 493 ASTM E 499 ASTM E 518 REV A ASTM E 543 ASTM E 545 ASTM E 546 ASTM E 557 ASTM E 570 ASTM E 577 ASTM E 580 ASTM E 595 ASTM E 596 ASTM E 602 ASTM E 604 ASTM E 607 ASTM E 619 ASTM E 621 ASTM E 662 ASTM E 666 ASTM E 667 ASTM E 671 ASTM E 672 ASTM E 675 ASTM E 691 ASTM E 694 ASTM E 713

ASTM E 720 ASTM E 721 ASTM E 722 ASTM E 736 ASTM E 737 ASTM E 756 ASTM E 774 ASTM E 785 ASTM E 787 ASTM E 795 ASTM E 800 ASTM E 812 ASTM E 814 ASTM E 822 ASTM E 825 ASTM E 835/E 835M ASTM E 865 ASTM E 883 ASTM E 930 ASTM E 934 ASTM E 969 ASTM E 1001 REV A ASTM E 1042 ASTM E 1077 ASTM E 1094 ASTM E 1095 ASTM E 1098 ASTM E 1146 ASTM E 1157 ASTM E 1182 ASTM E 1225 ASTM E 1237

ASTM E 1251 ASTM E 1264 ASTM E 1392 ASTM E 1441 ASTM E 1456 ASTM E 1570 ASTM E 1626 ASTM E 1742 ASTM E 2030 ASTM E 2073 ASTM F 36 ASTM F 37 ASTM F 119 ASTM F 141 ASTM F 142 ASTM F 150 ASTM F 152 ASTM F 306 ASTM F 330 ASTM F 387 ASTM F 402 ASTM F 405 ASTM F 410 ASTM F 412 ASTM F 436 ASTM F 436M ASTM F 437 ASTM F 438 ASTM F 439 ASTM F 441/F 441M ASTM F 442/F 442M ASTM F 458 ASTM F 459 ASTM F 467

ASTM F 467M ASTM F 468 ASTM F 468M ASTM F 477 ASTM F 480 REV A ASTM F 483 ASTM F 493 ASTM F 526 ASTM F 536 ASTM F 541 ASTM F 543 ASTM F 560 ASTM F 568 ASTM F 568M ASTM F 585 ASTM F 593 ASTM F 594 ASTM F 606M ASTM F 607 ASTM F 670 ASTM F 696 ASTM F 707/F 707M ASTM F 718 ASTM F 721 ASTM F 726 ASTM F 738 ASTM F 758 ASTM F 765 ASTM F 788/F 788M ASTM F 791 ASTM F 794 ASTM F 812/F 812M

ASTM F 814 REV B ASTM F 835 ASTM F 836 ASTM F 836M ASTM F 841 ASTM F 844 ASTM F 856 ASTM F 858 ASTM F 859 ASTM F 860 ASTM F 861 ASTM F 872 ASTM F 879 ASTM F 879M ASTM F 880 ASTM F 880M ASTM F 895 ASTM F 899 ASTM F 906 ASTM F 912 ASTM F 912M ASTM F 917 ASTM F 918 ASTM F 920 ASTM F 921 ASTM F 941 ASTM F 952 ASTM F 957 ASTM F 959M ASTM F 960 ASTM F 965 ASTM F 1021

ASTM F 1023 ASTM F 1026 ASTM F 1079 ASTM F 1083 ASTM F 1123 ASTM F 1156 ASTM F 1192 ASTM F 1217 ASTM F 1242 ASTM F 1267 ASTM F 1275 ASTM F 1312 ASTM F 1332 ASTM F 1347 ASTM F 1360 ASTM F 1370 ASTM F 1448 REV A ASTM F 1602 ASTM F 1700 ASTM F 1783 ASTM F 1793 ASTM G 7 ASTM G 15 REV B ASTM G 21 ASTM G 22 ASTM G 23 ASTM G 26 ASTM G 28 ASTM G 29 ASTM G 34 ASTM G 47 ASTM G 158

ASTM S I 10 MODUK AQAP-150 MODUK AQAP-170 EIA EIA-36471B EIA EIA-738 EIA EIA/TIA455-170 EIA GEB1 EIA TIA/EIA455-46A EIA TIA/EIA455-51A EIA TIA/EIA455-53A EIA TIA/EIA455-173 IEEE 85 IEEE 200 IEEE 812 IEEE C50.10 IPC D-351 IPC D-352 IPC J-STD006A NEMA C78.1 NEMA C78.2 NEMA C81.61 NEMA ICS 6 NFPA 1902 NFPA 1903 NFPA 1904 NISO Z39.18

NSF 2 SUPPLEMENT SAE AIR 1378B SAE AMS 1424D SAE AMS 1546B SAE AMS 2300J SAE AMS 2518B SAE AMS 2640J SAE AMS 2644B SAE AMS 3135E SAE AMS 3335D SAE AMS 4383E SAE AMS 4845G SAE AMS 4908F SAE AMS 5050K SAE AMS 5053H SAE AMS 5115H SAE AMS 5328D SAE AMS 5355H SAE AMS 5356B SAE AMS 5357B SAE AMS 5678E

SAE AMS 5683F SAE AMS 5716H SAE AMS 5732H SAE AMS 5775D SAE AMS 5810A SAE AMS 5840D SAE AMS 5865D SAE AMS 5887B SAE AMS 5888B SAE AMS 5889B SAE AMS 5890D SAE AMS 6257A SAE AMS 6270N SAE AMS 6292G SAE AMS 6294G SAE AMS 6412L SAE AMS 6442F SAE AMS 6455H SAE AMS 6485G SAE AMS 6524D SAE AMS 7261/1F SAE AMS 7261/2F

SAE AMS 7261D SAE AMS 7265C SAE AMS 7440D SAE AMS-C27725A SAE AS 1002F SAE AMS-S7124A SAE AMS-S83318 SAE AS 1003E SAE AS 1004E SAE AS 1005F SAE AS 1006E SAE AS 1007E SAE AS 1008F SAE AS 1009F SAE AS 1010E SAE AS 1035D SAE AS 7325B SAE AS 8804A SAE AS 9141A SAE AS 9142A SAE AS 9202A SAE AS 9203A

SAE AS 9204A SAE AS 9205A SAE AS 9218A SAE AS 9362A SAE AS 9363A SAE AS 9364A SAE AS 9371A SAE AS 9372A SAE AS 9373A SAE AS 9375A SAE AS 9376A SAE AS 9454A SAE AS 18607A SAE AS 21150C SAE AS 21151C SAE AS 21152C SAE AS 21153C SAE AS 24333A SAE AS 24334A SAE AS 33671B SAE AS 38386 SAE J 231 SAE J 590

SAE J 607 SAE J 742 SAE J 945 SAE J 1164 SSPC PA GUIDE 3 UL 563 UL 567 UL 1025 UL 1247 UL 1256 UL 1439 CSA/AM ANSI Z21.22B-2001 AIA/NAS NA 0167 AIA/NAS NAS 366 ASTM F 1145 ASTM F 993 ASTM C 36/C 36M ASTM D 1037 ASTM D 892 ASTM B 134/B 134M ASTM D 2092 CSA/AM CSA/ANSI Z83.8 AIA/NAS NASM91524 AIA/NAS NASM91525 AIA/NAS NASM51939

AIA/NAS NASM21382 AIA/NAS NASM21384 AIA/NAS NASM21387 AIA/NAS NAS 1405 AIA/NAS NASM27976 AIA/NAS NASM28728 AIA/NAS NASM51929 AIA/NAS NASM90120 AIA/NAS NAS 1812 AIA/NAS NAS 1402 AIA/NAS NAS 560 AIA/NAS NAS 1584 AIA/NAS NASM91522 ASME MH1B AIA/NAS NAS 1590 ASME B30.16A AIA/NAS NAS 1814 AIA/NAS NAS 589 AIA/NAS NAS 5 AIA/NAS NA 0063 AIA/NAS NAS 699 AIA/NAS NAS 369

AIA/NAS NAS 1912 AIA/NAS NAS 1916 AIA/NAS NAS 464 AIA/NAS NAS 372 AIA/NAS NAS 1585 AIA/NAS NAS 528 AIA/NAS NAS 1404 AIA/NAS NAS 587 AIA/NAS NAS 586 AIA/NAS NA 0062 AIA/NAS NAS 1806 AIA/NAS NAS 1583 AIA/NAS NAS 585 AIA/NAS NAS 1786 AIA/NAS NAS 1096 AIA/NAS NAS 1810 AIA/NAS NAS 371 AIA/NAS NAS 1908 AIA/NAS NAS 1816 AIA/NAS NAS 373 AIA/NAS NAS 1403 AIA/NAS NAS 120

AIA/NAS NAS 1406 AIA/NAS NAS 367 AIA/NAS NAS 1240 AIA/NAS NAS 1914 AIA/NAS NAS 363 AIA/NAS NAS 1910 ASME B31.4A AIA/NAS NAS 365 AIA/NAS NAS 696 AIA/NAS NAS 361 AIA/NAS NA 0165 AIA/NAS NAS 368 AIA/NAS NAS 583 AIA/NAS NAS 362 AIA/NAS NAS 1906 AIA/NAS NAS 519 AIA/NAS NAS 1699 AIA/NAS NAS 590 AIA/NAS NAS 364 AIA/NAS NAS 370 AIA/NAS NA 0166 AIA/NAS NAS 496

AIA/NAS NAS 588 AIA/NAS NAS 584 AIA/NAS NAS 1808 AIA/NAS NAS 1237 AIA/NAS NAS 819 ANSI C78.41 ANSI C80.1 ASTM E 323 ASTM C 33 REV A ASTM E 864 ASTM D 822 ASTM B 21/B 21M ASTM F 704 ASTM B 36/B 36M ASTM B 211M ASTM D 92 ASTM A 242/A 242M ASTM D 975 ASTM D 2200 ASTM B 453 ASTM D 611 ASTM PS 93 ASTM D 2700 ASTM D 1385 ASTM D 525 ASTM B 248 ASTM D 4306

ASTM D 2699 ASTM D 1186 ASTM D 2274 ASTM B 122/B 122M ASTM D 638 ASTM D 1644 ASTM C 233 ASTM D 86 ASTM A 796/A 796M ASTM C 960/C 960M ASTM C 140 REV A ASTM D 1073 ASTM D 1693 ASTM D 3575 ASTM A 516/A 516M ASTM E 1672 ASTM D 3699 ASTM D 4956 REV A ASTM B 121/B 121M ASTM E 55 ASTM B 108 ASTM D 1238 ASTM B 139/B 139M ASTM D 140 ASTM A 36/A 36M ASTM D 3578 ASTM D 4562 ASTM D 2084 ASTM D 1655 ASTM C 602 REV A ASTM D 3170

ASTM B 196/B 196M ASTM B 69 ASTM D 4801 ASTM D 3577 ASTM B 601 ASTM D 882 ASTM A 588/A 588M ASTM B 248M ASTM D 1929 ASTM A 453/A 453M ASTM D 4485 ASTM E 494 ASTM F 782 ASTM D 2240 ASTM B 247M ASTM E 648 ASTM F 552 ASTM D 922 REV A ASTM C 728 ASTM F 446 ASTM A 827/A 827M ASTM A 710/A 710M ASTM B 363 ASTM B 135 ASTM B 249/B 249M ASTM D 2949 ASTM A 668/A 668M ASTM D 4863 ASTM E 517 ASTM D 1776

ASTM E 801 ASTM D 2106 ASTM F 1325 ASTM D 813 ASTM C 535 ASTM C 131 ASTM F 837M ASTM B 99/B 99M ASTM D 396 ASTM C 828 ASTM A 109/A 109M ASTM E 498 ASTM A 178/A 178M ASTM D 2239 ASTM F 738M ASTM D 1091 ASTM B 187 ASTM F 537 ASTM D 4786 ASTM A 492 ASTM A 450/A 450M REV A ASTM D 1815 ASTM A 423/A 423M ASTM D 6075 ASTM D 2096 ASTM C 442/C 442M ASTM F 835M

ASTM B 209M ASTM D 2098 ASTM E 709 ASTM D 2241 ASTM D 4097 ASTM D 2603 ASTM D 2726 ASTM C 311 ASTM A 131/A 131M ASTM A 312/A 312M ASTM B 111 ASTM B 241/B 241M ASTM E 2072 ASTM A 285/A 285M ASTM D 3307 ASTM D 4831 ASTM F 1344 ASTM D 816 ASTM B 418 ASTM D 3654/D 3654M ASTM D 244 ASTM A 529/A 529M ASTM F 1182 ASTM D 450 ASTM C 475 ASTM C 12 ASTM B 240 ASTM D 2513 ASTM D 6116

ASTM C 507M ASTM A 278/A 278M ASTM B 169/B 169M ASTM D 1740 ASTM D 465 ASTM C 618 ASTM F 1667 ASTM C 836 ASTM C 423 ASTM F 138 ASTM B 197/B 197M ASTM D 3266 ASTM D 648 ASTM C 827 ASTM A 515/A 515M ASTM D 2386 ASTM C 110 REV A AWS B4.0 AWS D10.9 ASTM A 792/A 792M REV A EIA 748 EIA TIA/EIA455-35A ASTM D 613 IPC HDBK-001 ISO 9002

ISO 9003 NEMA C78.3 SAE AMS 6478A SAE AMS 6444J SAE AMS 6433E SAE AS 7253B SAE AMS 5384E SAE AMS 2362B SAE AMS 4310D SAE AMS 2303E SAE AMS 6532B SAE AMS 4363F SAE AS 1227C SAE AMS 7717D SAE AMS 6437F SAE AMS 7903A SAE AMS 6356E ASTM B 167 SAE AS 7250B SAE AMS 5331F SAE AS 4854 SAE AS 5877 SAE AMS 2301J

SAE AMS 5585F SAE AMS 7907A ASTM D 4783 SAE AMS 5578E SAE AMS 6477A SAE AMS 5560K SAE AMS 2405C ASTM C 55 REV A SAE AMS 5625D SAE AMS 5593F SAE AMS 5036H ASTM A 153/A 153M REV A SAE AMS 6543C SAE AMS 5330D SAE AMS 4816C ASTM D 4857 REV A ASTM F 880 REV A SAE MAM 2303C SAE AMS 3870D SAE AMS 7261/3E ASTM D 975 REV A

SAE AMS 6354E SAE AMS 7904B SAE AMS 5075F SAE AMS 5080J ASTM D 225 SAE AMS 5884B SAE AMS 5525H SAE AMS 6365J SAE AMS 3416A SAE AMS 2759/7A SAE AMS 5110H ASTM C 90 REV A SAE AMS 5637G SAE AS 5195A SAE AMS 6518B SAE AMS 7262C ASTM B 168 ASTM A 633/A 633M SAE AMS 5120K SAE AMS 6454C SAE AS 3232A SAE AMS 7906A

SAE AMS 6519B SAE AMS 5586F SAE AMS 3815D SAE AMS 6435D ASTM D 2700 REV A ASTM C 652 REV A SAE AMS 3823D SAE AMS 7905A SAE AS 7251B SAE AMS 6426E SAE AMS 3821B SAE AMS 5544H ASTM A 1008/A 1008M REV A ASTM D 2699 REV A SAE AS 4393B SAE AS 91001A SAE AMS 3880C ASTM D 4300 SAE AMS 6520D SAE AMS 5608E SAE AMS 5672C UL 521 BULLETINS

ASTM D 4101 REV A UL 1244 BULLETINS ASTM D 2274 REV A ASTM A 615/A 615M REV B ASTM E 200 ASTM D 2837 ASTM F 836M REV A ASTM C 129 ASTM A 494/A 494M REV A ASTM D 4066 REV A ASTM E 143 ASTM F 467 REV A ASTM D 1552 ASTM A 500 REV A ASTM D 974 ASTM A 463/A 463M REV A ASTM D 4814 REV A ASTM D 897 ASTM D 2983 ASTM F 468M REV A ASTM B 173 REV A ASTM A 760/A 760M REV A

ASTM D 2112 REV A ASTM E 83 ASTM C 901 ASTM F 467M REV A ASTM B 69 REV A ASTM D 3878 ASTM A 48/A 48M ASTM F 880M REV A ASTM C 127 ASTM B 411/B 411M ASTM D 1159 ASTM A 123/A 123M REV A ASTM D 3832 ASTM D 3790 ASTM B 166 ASTM A 234/A 234M ASTM F 837 ASTM E 74 ASTM D 4020 ASTM D 1932 ASTM D 3182 ASTM F 949 REV A ASTM D 2680 ASTM D 3453 ASTM A 579 ASTM D 3241 ASTM D 1831

ASTM D 2287 ASTM D 3017 ASTM C 685/C 685M ASTM F 141 REV A ASTM C 139 ASTM A 673/A 673M ASTM A 466/A 466M ASTM C 272 ASTM D 6018 ASTM D 3035 ASTM D 2513 REV A ASTM A 755/A 755M ASTM C 128 AWS D1.1/D1.1M EIA EIA-36410A EIA EIA-36442B EIA EIA-36453B EIA EIA-36483 EIA EIA-36422B EIA EIA-36423B EIA EIA-343-A EIA EIA-36445A IPC J-STD001C SAE AMS 5902B SAE AS 683C

SAE AMS 5655E SAE AMS 5689F SAE AMS 6382M SAE AMS 5737N SAE AMS 5604E SAE ARP 868C SAE AMS 5613R SAE AS 9360A SAE AS 871B SAE AMS 4507H SAE AMS 5504L SAE AMS 5339E SAE AMS 2401F SAE AMS 5649F SAE MA 3302A SAE AMS 5694H SAE AMS 5805G SAE AMS 5506F SAE AMS 5798E SAE AMS 5697E SAE AMS 5560L SAE AMS 6373F

SAE AMS 4926K SAE AMS 4111C SAE AMS 5731K SAE AMS 5505E SAE AMS 5839A SAE AMS 5553F SAE MA 3354A SAE AMS 5614E SAE MA 3304A SAE AMS 5836B SAE AMS 4143D SAE AMS 5674E SAE AMS 6257B SAE AMS 5734J SAE AMS 5830B SAE AMS 6438E SAE AMS 5077F SAE MA 3353A SAE AMS 5778E SAE AMS 5831B SAE AMS 5819A SAE AS 1001F

SAE AMS-C83231A SAE AMS 2486C SAE ARP 1902A SAE AMS 5854A SAE MAP 1753A SAE AMS 6378F SAE AMS 6370L SAE AMS 5828G SAE AMS 5675E SAE AMS 4984B SAE AMS 5823E SAE AMS 5914A SAE AMS 2406K SAE AMS 6422G SAE AS 9358A SAE AS 9374A SAE MA 3339A SAE AMS 5832F SAE AMS 7718E SAE AMS 7445D SAE AMS 5635E SAE AMS 6278B

SAE AMS 5337C SAE AS 686B SAE AS 92001A UL 749 BULLETINS ACI 347 ASTM A 480/A 480M REV A ASTM D 2949 REV A ASTM D 3145 ASTM D 3295 ASTM D 3577 REV A ASTM D 3578 REV A ASTM D 3652/D 3652M

Title Aluminum Standards and Data Specifications for AluminumSheet Metal Work in Building Construction Construction Manual Series Section5 Fourth Edition Designation System forAluminum Finishes Standards for AnodizedArchitectural Aluminum Voluntary Specifications forAluminum and Poly (Vinyl Chloride) (PVC) Prime Windows and Glass Doors(Replaces AAMA 101V-86 and GS-001) Methods of Test for ExteriorWalls Voluntary Guide Specificationsand Inspection Methods for Integral Color Anodic Finishes for ArchitecturalAluminum Voluntary Guide Specificationand Inspection Methods for Clear Anodic Finishes for Architectural Aluminum Voluntary Guide Specificationand Inspection Methods for Electrolytically Deposited Color Anodic Finishesfor Architectural Aluminum Voluntary Guide Specificationfor Cleaning and Maintenance of Architectural Anodized Aluminum Voluntary Guide Specificationfor Cleaning and Maintenance of Painted Aluminum Extrusions and Curtain WallPanels Voluntary Specifications andTest Methods for Sealants Voluntary Specifications forAluminum Storm Doors Fiber Analysis: QualitativeEditorially Revised 1988; Related to ISO 3072 Water Repellency: Tumble JarDynamic Absorption Test Water Resistance: HydrostaticPressure Test Related to ISO 811 Instrument Ball BearingsMetric Design R(1998) Instrument Ball Bearings InchDesign R(1998) Needle Roller Bearings Radial,Metric Design R(1994) Needle Roller Bearings Radial,Inch Design R(1993) Tapered Roller Bearings -Radial Metric Design R(1993) Tapered Roller Bearings -Radial Inch Design R(1999) Radial Bearings of Ball,Cylindrical Roller and Spherical Roller Types Metric Design Spherical Plain RadialBearings, Joint Type Metric Design R(1999) Spherical Plain RadialBearings, Joint Type Inch Design R(1999) Thrust Bearings of TaperedRoller Type - Inch Design R(1999) Thrust Bearings of Ball,Cylindrical Roller and Spherical Roller Types - Metric Design R(1999) Thrust Bearings of Ball andCylindrical Roller Types - Inch Design R(1999) Rolling Bearings, LinearMotion Recirculating Ball, Sleeve Type Inch Series R(1999) Thin Section Ball BearingsInch Design Cooling and Insulating Systemsfor Mass Concrete R(1998) Erosion of Concrete inHydraulic Structures R(1998) Standard Practice forSelecting Proportions for Normal, Heavyweight, and Mass Concrete R(1997) Recommended Practice forEvaluation of Strength Test Results of Concrete R(1997) Batching, Mixing, and JobControl of Lightweight Concrete R(1997) Standard Specification forCold Weather Concreting R(1998) Cold Weather ConcretingR(1997) Standard Practice for CuringConcrete R(1997)

Building Code Requirements forStructural Concrete (ACI 318-99) and Commentary (ACI 318R-99) Suggested Analysis and DesignProcedures for Combined Footings and Mats R(1993) Standard Specification forCast-In-Place Nonreinforced Concrete Pipe R(1997) Recommendations forCast-In-Place Nonreinforced Concrete Pipe R(1997) Standard Specifications forStructural Concrete (ACI 301-96) with Selected ACI and ASTM ReferencesSYNOPSIS ONLY Standard Specification forBonding Hardened Concrete, Steel, Wood, Brick, and Other Materials toHardened Concrete with a Multi-Component Epoxy Adhesive R(1997) Use of Epoxy Compounds withConcrete R(1998) Guide to Shotcrete R(1995) Measurement of Properties ofFiber Reinforced Concrete R(1999) ACI Detailing Manual Cement and ConcreteTerminology Guide for Making a ConditionSurvey of Concrete in Service R(1997) Guide to Durable ConcreteR(1997) Mass Concrete Effect of Restraint, VolumeChange, and Reinforcement on Cracking of Mass Concrete Standard Practice forSelecting Proportions for Structural Lightweight Concrete Guide for SelectingProportions for No-Slump Concrete Supersedes ACI 211.3 - 75 Guide for StructuralLightweight Aggregate Concrete R(1999) Guide for Use of Normal Weightand Heavyweight Aggregates in Concrete Standard Practice for the Useof Shrinkage- Compensating Concrete Control of Cracking inConcrete Structures Specifications for StructuralConcrete Guide for Concrete Floor andSlab Construction Guide to Cast-In-PlaceArchitectural Concrete Practice Placing Concrete by PumpingMethods Heavyweight Concrete:Measuring, Mixing, Transporting, and Placing Placing Concrete with BeltConveyors Guide for Measuring, Mixing,Transporting, and Placing Concrete Hot Weather Concreting Guide for Consolidation of Concrete Guide for Concrete Inspection Guide to Formwork for ConcreteR(1999) Committee Report on FiberReinforced Shotcrete Specification for Shotcrete Guide to Certification ofShotcrete Nozzlemen Guide to the Use ofWaterproofing, Dampproofing, Protective, and Decorative Barrier Systems forConcrete (Revised 1985) Accelerated Curing of Concreteat Atmospheric Pressure - State of the Art Specification for MasonryStructures and Commentary ASCE 6-99/TMS 602-99 Fiber Reinforced Concrete Alloy for Dental Amalgam:Addendum Included, Supplement 1A-1979 (R 1993) Specification No. 8 for ZincPhosphate Cement (R 1987)

Dental Zinc Oxide-EugenolCements and Zinc Oxide Non- Eugenol Cements (Withdrawn) Ductile-IronFittings 3-Inch Through 24- Inch, for Gas Revision of ANSI A21.14-1984 Relief Valves for Hot WaterSupply Systems First Edition; CSA 4.4-M99 Quick Disconnect Devices forUse with Gas Fuel Appliances First Edition; CSA 6.9-M98 Quick Disconnect Devices forUse with Gas Fuel Appliances First Edition; CSA 6.9-M98; Addenda toZ21.411998 Gas-Fired Central FurnacesSecond Edition; CSA 2.3-M98 Gas-Fired Central FurnacesSecond Edition; Addenda to ANSI Z21.47-1998; CSA 2.3-M98 Gas-Fired Central FurnacesSecond Edition; Addenda to ANSI Z21.47-1998; CSA 2.3-M98 Gas Water Heaters Volume I,Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less FirstEdition; CSA 4.1-M98 Gas Water Heaters Volume I,Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less FirstEdition; CSA 4.1-M98; Addenda to Z21.10.1-1998 Gas Water Heaters Volume I -Storage Water Heaters with Input Ratings of 75,000 Btu per Hour or Less FirstEdition; CSA 4.1-M98; Addenda to Z21.10.1-1998 Gas Appliance PressureRegulators Second Edition; CSA/CGA 6.3-2000

Automatic Vent Damper Devicesfor Use with Gas-Fired Appliances First Edition; CSA/CGA 6.14-M96

Gas-Fired Low-Pressure Steamand Hot Water Boilers Twenty-Second Edition R(1998) Gas-Fired Low-Pressure Steamand Hot Water Boilers Gas-Fired Low-Pressure Steamand Hot Water Boilers (Withdrawn) Direct VentCentral Furnaces Fourth Edition Superseded by Z21.47-1993 (Withdrawn) Direct VentCentral Furnaces Addenda to Z21.64-1990; Superseded by Z21.47-1993 Gas Unit Heater and Gas-FiredDuct Furnaces First Edition; CGA 2.6-M96; Addenda Z83.8a-1998; AddendaZ83.8b-2000; Corrected Replacement June 04 2001

Gas Food Service EquipmentFirst Edition; CGA 1.8-M96; Supersedes Z83.12-1994, Z83.13-1994, Z83.141994and Z83.15-1994; Addenda Z83.11a-1997 Addenda to Z83.11-1996 GasFood Service Equipment First Edition; CSA/CGA 1.8B-2000

Gas Utilization Equipment inLarge Boilers First Edition; Revision of Z21.30-1950 R(1995) Gas Utilization Equipment inLarge Boilers R(1989) Gas Utilization Equipment inLarge Boilers R(1989) Gas-Fired Infrared Heaters Gas-Fired Infrared Heaters (Withdrawn) Gas Food ServiceEquipment (Baking and Roasting Ovens) First Edition; (CGA 1.10M94)Superseded by Z83.11-1996 (Withdrawn) Gas Food ServiceEquipment (Deep Fat Fryers) First Edition; (CGA 1.9-M94) Superseded by Z83.11-1996 (Withdrawn) Gas Food ServiceEquipment (Counter Appliances) First Edition; (CGA 1.11-M94) Superseded byZ83.11-1996 (Withdrawn) Gas Food ServiceEquipment (Kettles, Steam Cookers and Steam Generators) First Edition; (CGA1.15- M94) Superseded by Z83.11-1996 Metric Usage Geometry Factors forDetermining the Pitting Resistance and Bending Strength of Spur, Helical andHerringbone Gear Teeth Revision of 226.01 R(1995) Gear Classification andInspection Handbook Tolerances and Measuring Methods for Unassembled Spur andHelical Gears (Including Metric Equivalents) Errata - 07/90; Err Fundamental Rating Factors andCalculation Methods for Involute Spur and Helical Gear Teeth Rating the Pitting Resistanceand Bending Strength of Generated Straight Bevel, Zerol Bevel, and SpiralBevel Gear Teeth Gear Materials and HeatTreatment Manual Revision of 240.01 Design Manual for Bevel Gears Cylindrical WormgearingTolerance and Inspection Methods Replacement of AGMA 390.03a Design and Selection ofComponents for Enclosed Gear Drives Standard for Spur, Helical,Herringbone and Bevel Enclosed Drives

Shaft Mounted and ScrewConveyor Drives Using Spur, Helical and Herringbone Gears Revision of 480.06;Revised by ANSI/AGMA 6109-A00 and ANSI/AGMA 6009-A00 R(1994) Practice for EnclosedCylindrical Wormgear Speed Reducers and Gearmotors Standard for Gearmotor, ShaftMounted and Screw Conveyor Drives Metric Edition; Revision of ANSI/AGMA6019-E89 and 6021-G89 Flexible Couplings - PotentialUnbalance Classification Revision of 515.02 R(1996) Bores and Keyways for FlexibleCouplings (Inch Series) Redesignation of AGMA 518.xx; Supersedes 511.02,512.03, 513.01 R(1994) Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric Rivet - Countersunk Head 100Deg. Superseded - December 1941 Cancelled - October 1989 (Use AN 426) (Rev.1) Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric Bolt-Machine, AircraftRevision 1; FSC 5306 Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid - Universal HeadAluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Procurement SpecificationMetric Fasteners, Titanium Alloy, Externally Threaded, 1100 MPa Tensile, 660MPa Shear (Rev. 2) Bolt - Machine, AircraftRev.1; FSC 5306 Procurement SpecificationMetric Fasteners, Alloy Steel, Externally Threaded, 1100 MPa Tensile, 660 MPaShear (Rev. 2) Bolt - Machine, AircraftRev.1; FSC 5306 Nuts, Self Locking, 235Degrees C, Metric, Procurement Specification for (Rev. 2) Bolt - Machine, AircraftRev.1; FSC 5306

Bolt - Machine, AircraftRev.1; FSC 5306 Stud - Coarse Thread Rev.4;FSC 5307 Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid-Countersunk 100Degree Head, Aluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric Bolt - Machine, AircraftRev.1; FSC 5306 Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305

Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Screw, Machine-Flat FillisterHead, Close Tol, Short Thd, Offset Cruciform Rev.12; FSC 5305 Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric Rivet, Solid-Countersunk 100Degree Shear Head, Aluminum and Aluminum Alloy, Metric Recess - Torq-Set Dimensionsof Recess, Gage and Driver, Metric (Rev. 2) Rivet, Blind, Self-PluggingMechanically Locked Spindle, Bulbed (Rev. 7) Procurement Specification,Metric Fasteners, A-286 CRES Externally Threaded, 1100 MPa Tensile, 660 MPaShear (Rev. 2) Nut, Self-Locking, Floating,Plate, Two- Lug, Metric Low Height, C'Bored, 1100 MPa 235 Degrees C, 425Degrees C (Rev. 2) Nut, Self-Locking, Floating,Plate, Two- Lug, Metric Low Height, C'Bored, 1100 MPa 235 Degrees C, 425Degrees C (Rev. 2) Nut, Self-Locking, SplineDrive, 1250 MPa, 235 DEG C, 425 DEG C, Metric (Rev. 2) Nut, Self-Locking, SplineDrive, 1250 MPa, 235 DEG C, 425 DEG C, Metric (Rev. 2) Nut, Self-Locking, HexagonExtended Washer 1100 MPa, Metric, 235 Degrees C, 425 Degrees C (Rev. 2) Nut, Self-Locking, HexagonExtended Washer 1100 MPa, Metric, 235 Degrees C, 425 Degrees C (Rev. 2) Screw, Close Tolerance PanHead Offset Cruciform Recess Alloy Steel, 1100 MPa, Metric (Rev. 2) Bolt, Close Tolerance, HexagonHead Alloy Steel 1100 MPa Metric Rev. 4 Bolt, Close Tolerance, HexagonHead, Titanium Alloy 1100 MPa Metric (Rev. 2) Screw, Close Tolerance, 100Degree Flush Head Offset Cruciform Recess Alloy Steel 660 MPa Shear Metric(Rev. 3) Screw, Close Tolerance, 100Deg. Flush Head, Offset Cruciform Recess, Titanium Alloy, 660 MPa, Shear,Metric (Rev. 4) Nut, Self-Locking, Plate, TwoLug, Fixed Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees C(Rev. 1) Nut, Self-Locking, Plate, TwoLug, Fixed Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees C(Rev. 1)

Screw, Close Tolerance, 100Degree Flush Head, Offset Cruciform Recess A-286 CRES 660 MPa Shear Metric(Rev. 3) Spacer, Sleeve-Rivet (Rev. 9) Bolt, Eye FSC 5306 Spacer, Sleeve - Screw andBolt (Segments Inactive for New Design) Rev. 10 Bolt, Eye FSC 5306 Nut, Self Locking, 425 DegreesC, Metric, Procurement Specification for (Rev. 2) Bolt, Eye FSC 5306 Bolt, Close Tolerance, HexagonHead, A-286 CRES 1100 MPa Metric (Rev. 3) Bolt, Eye FSC 5306 Screw, Close Tolerance PanHead Offset Cruciform Recess A-286 CRES 1100 MPa Metric (Rev. 2) Bolt, Eye FSC 5306 Screw, Close Tolerance PanHead Offset Cruciform Recess Titanium Alloy 1100 MPa, Metric (Rev. 2) Spacer, Sleeve, Nonmetallic,Epoxy and Phenolic, Screw and Bolt (Rev. 1) Bolt, Eye FSC 5306 Bolt, Eye FSC 5306 Nut, Self-Locking, CastellatedReduced Hexagon, 600 MPa, Metric, 235 Degrees C (Rev. 1) Bolt, Eye FSC 5306 Nut, Self-Locking,Castellated, Reduced Hexagon, 1100 MPa Tensile, Metric 235 Degrees C (Rev. 1) Rivet - Solid, Universal Head,A286 Corrosion Resistant Steel, Metric (Rev. 1) Rivet - Solid, Universal Head,Monel, Metric Rivet - Solid, Countersunk 100Degree Head, A286 Corrosion Resistant Steel, Metric Rivet - Solid, Countersunk 100Degree Head, Monel, Metric

Rivet - Solid, ReducedCountersunk 100 Degree Head, A286 Corrosion Resistant Steel, Metric Rivet - Solid, ReducedCountersunk 100 Degree Head, Monel, Metric Procurement Specification,Metric Fasteners, Alloy Steel, Externally Threaded, 1250 MPa Tensile, 750 MPaShear (Rev. 2) Bolt, Close Tolerance, SplineDrive, Alloy Steel, 1250 MPa, Metric (Rev. 2) Bolt, Close Tolerance, SplineDrive, A286 CRES, 1250 MPa Metric (Rev. 2) Screw, Close Tolerance, 100Degree Flush Head, Offset Cruciform Recess Alloy Steel 750 MPa Shear, Metric(Rev. 3) Nut, Self-Locking, Plate,Two-Lug, Low Height, Steel, 125 KSI Ftu, 450 Degrees F Rev.1; FSC 5310 Washer, Countersunk and Plain,for Use with Bolts and Nuts up to and Including 260 KSI Ftu Rev.1; FSC 5310 Strap, Retaining, Two Hole,for Pipe, Conduit, and Cable Rev.1; FSC 5340 Strap, Retaining, Two Hole,for Tubing Rev.1; FSC 5340 Nut, Self-Locking, SplineDrive, Alloy Steel, 1800 MPa, 235 Degrees C, Metric Cancelled - November 1994(Rev. 3) Nut, Plain, Clinch(Self-Clinching, Round) Rev.1; FSC 5310

Nut, Thin, with OptionalLockwire Hole, Metric (Rev. 1) Nut, Thin, with OptionalLockwire Hole, Metric (Rev. 1) Nut, Thin, with OptionalLockwire Hole, Metric (Rev. 1) Screw, Dual, Wrenching, HexHead/Offset Cruciform, A286 CRES, Full Thread, 1100 MPa - Metric (Rev. 5) Screw, Machine, Pan Head,Offset Cruciform, A286 CRES Full Thread 1100 MPa - Metric (Rev. 6) Screw, Cap, Hexagon SocketHead, Full Thread, A-286 CRES, 1100 MPa, Metric (Rev. 3) Screw, Machine, 100 DegreeFlush Head, Offset Cruciform Recess, Full Thread, A286 CRES, 1100 MPa Metric(Rev. 1) Bolt, Alloy Steel 1550 MPaTensile, Procurement Specification (Rev. 1) Bolt, Alloy Steel 1800 MPaTensile, Procurement Specification (Rev. 1)

Bushing-Clamp-Up, Steel,Chrome Plated (Rev. 5) Nut, Self-Locking, Plate, OneLug, Metric, Floating Low Height, C'Bored, 1100 MPa 235 Degrees C, 425Degrees C (Rev. 1) Bushing-Clamp-Up, Steel,Cadmium Plated (Rev. 7) Nut, Self-Locking, Plate, OneLug, Metric, Floating Low Height, C'Bored, 1100 MPa 235 Degrees C, 425Degrees C (Rev. 1) Bushing-Clamp-Up, Bronze (Rev.5) Bushing-Plain, Press Fit,Steel (Rev. 6) Bushing-Plain, Press Fit,Copper & Bronze Rev. 8 Nut, Self-Locking, Plate,Fixed, One Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235 Degrees C, 425 Degrees C (Rev. 1) Bushing-Flanged, Press FitSteel, Bronze, & Copper Rev. 9 Nut, Self-Locking, Plate,Fixed, One Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Fixed, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Fixed, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Fixed, Corner Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Fixed, Corner Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa, Metric235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Fixed, Side by Side Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric 235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Fixed, Side by Side Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric 235 Degrees C, 425 Degrees C (Rev. 1) Nut, Self-Locking, Plate,Floating, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric 235 DEG C, 425 DEG C (Rev. 2) Nut, Self-Locking, Plate,Floating, Two Lug Reduced Rivet Spacing, Low Height, C'Bored, 1100 MPa,Metric 235 DEG C, 425 DEG C (Rev. 2) Nut, Self-Locking, Plate,Floating, Side by Side, Reduced Rivet Spacing, Low Height, C'Bored, 900 MPa,Metric, 235 Degrees C, 425 Degrees C (Rev. 3) Nut, Self-Locking, Plate,Floating, Side by Side, Reduced Rivet Spacing, Low Height, C'Bored, 900 MPa,Metric, 235 Degrees C, 425 Degrees C (Rev. 3) Screw, Pan Head, OffsetCruciform Recess, Full Thread, Alloy Steel, 1100 MPa, Metric (Rev. 1) Screw, Pan Head, OffsetCruciform Recess, Full Thread, Titanium Alloy, 1100 MPa Metric (Rev. 1)

Screw, 100 Degree Flush Head,Offset Cruciform Recess Full Thread, Alloy Steel, 1100 MPa, Metric (Rev. 1) Screw, 100 Degree Flush Head,Offset Cruciform Recess Full Thread, Titanium Alloy, 1100 MPa, Metric (Rev.1) Nut, Self-Locking, Floating,Plate, Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425Degrees C (Rev. 1) Nut, Self-Locking, Floating,Plate, Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425Degrees C (Rev. 1) Nut, Self-Locking, Plate,Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees C(Rev. 1) Nut, Self-Locking, Plate,Corner Low Height, C'Bored, 1100 MPa, Metric 235 Degrees C, 425 Degrees C(Rev. 1) Screw, Hex Head OffsetCruciform Titanium, Full Thread, 1100 MPa, Metric (Rev. 5) Screw, Hex Head OffsetCruciform Alloy Steel, Full Thread, 1100 MPa, Metric (Rev. 6) Bracket, 90 Degree Angle,2-Bolt Attach, Metric Bracket, 90 Degree Angle,2-Bolt Attach, Metric Bracket, 90 Degree Angle,2-Rivet Attach, Metric Knob-Control, 1 Inch Spherical(Rev. 5) R(1992) Bracket, 90 Degree Angle,2-Rivet Attach, Metric Screw, Close Tolerance, 100Deg. Reduced Crown Head, Offset Cruciform Recess, Alloy Steel, 660 MPa Shear,Metric (Rev. 5) Knob-Control, 1 Inch Dia. X5/8 Oval, Plastic (Rev. 5) R(1992) Screw, Close Tolerance, 100Deg. Reduced Crown Head, Offset Cruciform Recess, A-286 CRES, 660 MPa Shear,Metric (Rev. 5) Screw, Close Tolerance, 100Deg. Reduced Crown Head, Offset Cruciform Recess, Titanium, 660 MPa Shear,Metric (Rev. 5) Bolt, Adjusting, Crown HexagonHead, Alloy Steel, Full Thread, 1100 MPa, Metric Screw, Captive, 100 DegreeFlush Head, Offset Cruciform Recess Alloy Steel, 660 MPa Shear, Metric (Rev.1) Screw, Captive, 100 DegreeFlush Head, Offset Cruciform Recess A-286 CRES, 660 MPa Shear, Metric (Rev.1) Screw, Captive, 100 DegreeFlush Head, Offset Cruciform Recess, Titanium, 660 MPa Shear, Metric (Rev. 2) Screw, Captive, Pan Head,Offset Cruciform Recess Alloy Steel, 660 MPa Shear, Metric (Rev. 1)

Screw, Captive, Pan Head,Offset Cruciform Recess A- 286 CRES, 660 MPa Shear, Metric (Rev. 1) Screw, Captive, Pan Head,Offset Cruciform Recess Titanium, 660 MPa Shear, Metric (Rev. 1) Nut, Self-Locking, Barrel,Floating, 1550 MPa, Metric (Rev. 2) Retainer, Nut, FloatingBarrel, Metric Washer, Dimpled, 100 Degree,Metric Washer, Dimpled, 100 Degree,Metric Nut, Floating, Self Locking, Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu, Replaceable Nut Element, 1/64 Oversize Rapair FSC 5310 Dial, Control, Multiturn Counters, Vernier, 1.81 Diameter FSC 5355

Dial, Control, Multiturn Counters, Vernier, 1.75 Diameter FSC 5355

Dial, Control, Multiturn Counters, 10 - Turn Counter, Concentric (1.810 - Inch Diameter) FSC 5355

Dial, Control, Multiturn Counters, Vernier, 1.16 Diameter FSC 5355

Dial, Control, Multiturn Counters, Three Digits FSC 5355

Dial, Control, Multiturn Counters, Three Digit, Illuminated and Nonilluminated FSC 5355

Dial, Control, Multiturn Counters, 100 - Turn Counters, 4 - Digit FSC 5355

Dial, Control, Multiturn Counters, Vernier, .88 Diameter FSC 5355

Knobs, Control (for Use with Electronic, Communications, and Allied Equipment) FSC 5355 Knob, Control, Ball FSC 5355 Knob, Control, Oval Tapered FSC 5355

Knob, Control, Tapered FSC 5355 Knob, Control, Round, Edge Lighted and Non-Edge Lighted FSC 5355 Knobs-Control, Plastic (Round, Concentric, Pointer, Spinner, Spinner Slip-Clutch, Bar, Tactile, Knob Lock Pointer, Slip-Clutch, and Knob Locks) FSC 5355 Electric Lamps - Microfilm Projection Lamps - Two-Inch (51mm) Dichroic Coated Integral Reflector, Rim Reference, Tungsten Halogen Lamps with GX5.3 Bases Consolidation Floor Drains and Trench Drains Revision and Redesignation of ASME A112.21.1M-1991 R(1998) Engineering Drawing Practices Standard Specification for Forged or Rolled Alloy- Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service R(2001) Standard Specification for Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service

Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both Standard Specification for General Requirements for Steel Plates for Pressure Vessels Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and HeatExchanger Tubes Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

Standard Specification for Seamless and Welded Austenitic Stainless Steel Pipes

Standard Test Methods and Definitions for Mechanical Testing of Steel Products Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples Standard Specification for Steel Wire, Plain, for Concrete Reinforcement AASHTO No: M 32 Standard Specification for High-Silicon Iron Pipe and Fittings Standard Specification for Aluminum-Alloy Permanent Mold Castings Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes Standard Guide for Engineering Chromium Electroplating Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR) E(2001) Standard Specification for General Requirements for Wrought Copper Alloy Wire Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip) Standard Specification for Copper Alloys in Ingot Form E(2002) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale) Standard Specification for Mortar for Unit Masonry Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form Standard Specification for Structural Clay Non-Load- Bearing Tile R(2001) Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation Standard Terminology Relating to Concrete Pipe and Related Products Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens from Cementitious Mixtures Standard Test Method for Permanganate Time of Acetone and Methanol R(2001) Standard Test Method for Carbon Black - Iodine Adsorption Number Standard Practice for Preparing Coal Samples for Analysis Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) IP Designation: 319/84 (89) Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures Standard Test Method for Carbon Black-Oil Absorption Number Standard Specification for Round Timber Piles E(2001) Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor E(2001) R(2001) Standard Test Method for Biodegradability of Alkylbenzene Sulfonates R(2001) Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry IP Designation: 338/98 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels R(2001) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings Standard Classification System for Specifying Plastic Materials Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials Standard Specification for Performance of Engine Oils Standard Specification for Road Tar R(2001) Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced Standard Test Methods for Thermal Transmission Properties of Thin Thermally Conductive Solid Electrical Insulation Materials Standard Test Methods for Liquid Paint Driers R(2002) Standard Specification for Liquid Paint Driers R(2001) Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents IP Designation: 2/98 Standard Terminology Relating to Soil, Rock, and Contained Fluids Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration British Standard 4457; IP Designation: 177/96 Standard Test Methods for Friction Tapes Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions R(1997) Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils E(2002) Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers Standard Test Method for Knock Characteristics of Aviation Gasolines by the Supercharge Method Method Standard No. 791b E(2001) Standard Specification for ASTM Thermometers Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scle Standard Test Methods for Tension Testing of Metallic Materials Standard Test Methods for Tension Testing of Metallic Materials (Metric) Standard Specification for Frying and Braising Pans, Tilting Type R(2001) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

Standard Specification for Kettles, Steam-Jacketed, 32 Oz to 20 Gal (1 to 75.7 L), Tilting, Table Mounted, Direct Connected, Gas Fired and Electric Fired R(2001) Standard Specification for Driven Fasteners: Nails, Spikes, and Staples Standard Specification for Tungsten Wire for Electron Devices and Lamps R(2002) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners [Metric] Addenda to Z83.11-1996 Gas Food Service Equipment First Edition; CSA/CGA 1.8a-M97

Addenda to Z83.8-1996 Gas Unit Heater and Gas-Fired Duct Furnaces First Edition; CSA/CGA 2.6a-M98

FOTP-188 Low Temperature Testing of Fiber Optic Components R(2001) Optical Fiber Cable Color Coding Water Heaters, Hot Water Supply Boilers, and Heat Recovery Equipment Printed 01/15/2002 Structural Examination of Titanium Alloys Chemical Etch Inspection Procedure (Noncurrent) Carburizing Carbon and Low-Alloy Steel Parts (R) Sealing Compound Aircraft Firewall Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed UNS R56400 Iron-Nickel Alloy, Strip 49Fe - 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10% Reduction UNS N09902 (Noncurrent) Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5Cr - 10.5Ni - 0.90 (Cb+Ta) Solution Heat Treated UNS J92641; Reaffirmed Noncurrent (Noncurrent) Alloy Castings, Investment, Corrosion and Heat Resistant 65.5Co - 25Cr - 1.8Ni- 5.0W as Cast UNS R30023; Reaffirmed Noncurrent January 2002 (Noncurrent) Alloy Castings, Investment, Corrosion and Heat Resistant 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast (Noncurrent) Alloy Castings, Investment, Corrosion and Heat Resistant 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum M

Steel, Corrosion and Heat-Resistant, Sheet, Strip, and Plate, 12.5Cr (SAE 51410) Annealed UNS S41000 Iron-Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15Si Solution Heat Treated UNS N08330 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat T Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated UNS S34720 Type 1; UNS S34723 Type 2 Nickel Alloy, Corrosion and Heat-Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed UNS N06600 Steel, Corrosion-Resistant, Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated UNS S30400 Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb 0.15N - 31Fe Solution and Precipitation Heat Treated UNS R3 (Noncurrent) Alloy Welding Electrodes, Covered, Corrosion and Heat Resistant 75Ni - 15Cr - 1.5 (Cb + Ta) 1.9Ti - 0.55Al - 5.5Fe UNS N07750; Reaffirmed Noncurrent Ja Steel Bars, Forgings, and Tubing 1.2Cr - 3.25 Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Electroslag Remelted or Consumable Electrode Vacuum Remelted UNS G93106 Steel, Welding Wire 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, Environment Controlled Packaging UNS G86200 Steel, Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) Consumable Electrode Vacuum Remelted Steel, Bars, Forgings, and Tubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) Consumable Electrode Vacuum Melted UNS K32550 Steel, Bars, Forgings, and Tubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) Vacuum Consumable Electrode Melted UNS K24728 Nickel-Iron Alloy, Magnetic, Sheet and Strip 50Ni - 50Fe Stamping Quality UNS K95000 Packing, Preformed, Hydraulic, +275 Degrees F ("O"Ring) FSC 5331 (R) Nut, Self-Locking, Plate, One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F FSC 5310; UNS S66286 (R) Nut, Self-Locking, Plate, One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F UNS S66286; FSC 5310 (R) Nut, Self-Locking, Plate, Two Lug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286 Class: 125 ksi/800 Degrees F FSC 5310; UNS S66286 (R) Nut, Self-Locking, Plate, Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F UNS S66286; FSC 5310 (R) Fitting, Sleeve, Flared FSC 4730; Should Be Used Instead of MS20819G, Which Was Cancelled on 28 September 1999 (R) Fitting, Union, Tube, .375 Bulkhead FSC 4730; Should Be Used Instead of AN832 and MS24393 That Were Cancelled on 11 February 2000 Bearings, Plain, Rod End, Self-Aligning, Self- Lubricating, General Specification for

(R) Screw, Machine, Steel, Diffused Nickel-Cadmium Plated, Hexagon Head UNS K14675, 195 ksi min, . 1380-40 UNJF-3A FSC 5305; UNS K14675 (R) Screw, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, UNS K14675, 195 ksi min, .1640-36 UNJF-3A FSC 5305; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, . 1900- 32 UNJF-3A FSC 5306; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, . 2500- 28 UNJF-3A FSC 5306; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head Steel, UNS K16475, 195 ksi min, . 3125-24 UNJF-3A FSC 5306; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, . 4375- 20 UNJF-3A FSC 5306; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, . 5000- 20 UNJF-3A FSC 5306; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, . 5625- 18 UNJF-3A FSC 5306; UNS K14675 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated, Hexagon Head, UNS K14675, 195 ksi min, . 6250- 18 UNJF-3A FSC 5306; UNS K14675 (R) Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1380-40 UNJF-3A FSC 5305; UNS G87400 (R) Screw, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1640-36 UNJF-3A FSC 5305; UNS G87400 (R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .1900-32 UNJF-3A FSC 5306; UNS G87400 (R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .3125-24 UNJF-3A FSC 5306; UNS G87400 (R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .375-24 UNJF-3A FSC 5306; UNS G87400 (R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .5000-20 UNJF-3A FSC 5306; UNS G87400 (R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .6250-18 UNJF-3A FSC 5306; UNS G87400 (R) Bolt, Machine - Steel, Cadmium Plated, Hexagon Head, UNS G87400, 125 ksi min, .7500-16 UNJF-3A FSC 5306; UNS G87400 (R) Nut, Plain, Hexagon, Cadmium Plated, UNS G87400, 125 ksi min FSC 5310; UNS G87400 (R) Nut, Plain, Hexagon - Drilled, Cadmium Plated, UNS G87400, 125 ksi min FSC 5310 Electrical Terminals Blade Type Bolt, Machine-Hex Head-PD Shank MJ Thread, AMS 6322, Cadmium Plate, Metric Reaffirmed Noncurrent November 2001; FSC 5306 12/26/2001 (20p)

11/19/2001 (10p) 1/16/2002 (6p) 3/7/2002 (32p) 11/9/2001 (12p) (DRAFT) UL Standard for Safety Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures Proposed Tenth Edition; Comments Due by February 28, (Draft) UL Standard for Safety Nonmetallic Cable Trays Systems Proposed First Edition; Comments Due January 10,2002 02/14/2002 (44p) (DRAFT)UL Standard for Safety Lightning Protection Components Proposed Fifth Edition; Comments Due April 25, 2002 Washer, Dimpled, 100 Degree,Metric Washer, Dimpled, 100 Degree,Metric Washer, Dimpled, 100 Degree,Metric Insert, Screw Thread, KeyLocked, Installation and Removal Procedure, Metric Insert, Screw Thread KeyLocked, Alloy Steel, Miniature, Metric FSC 5340, Revision 1 Insert, Screw Thread KeyLocked, A286 Cres Miniature, Metric (Rev. 1) Insert, Screw Thread Key Locked,Alloy Steel, Lightweight, Metric (Rev. 1) Insert, Screw Thread KeyLocked, A286 Cres Lightweight, Metric (Rev. 1) Insert, Screw Thread KeyLocked, Alloy Steel, Heavy Duty, Metric (Rev. 1) Insert, Screw Thread KeyLocked, A286 Cres Heavy Duty, Metric (Rev. 1) Bolt, Eye, Alloy Steel, 1100MPa Metric (Rev. 1) Bolt, Eye, A286 CRES, 1100 MPaMetric (Rev. 1) Bolt, Clevis, 660 MPa Shear,Metric (Rev. 1) Male Threaded Fasteners,Metric Design Parameters for

Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "T" Handle, Metric Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "T" Handle, Metric Screw, Fairing Washer,Assembly, Alloy Steel, Offset Cruciform Recess Full Thread, 1100MPa Tensile,Metric (Rev. 2) Screw, Fairing Washer,Assembly, 6AL-4V Titanium Alloy, Offset Cruciform Recess, Full Thread,1100MPa Tensile, Metric (Rev. 2) Pin, Quick Release, PositiveLocking Single Acting, Metric Procurement Specification for Setscrew, Hexagon Socket, CupPoint, A286 CRES, Metric (Rev. 1) Bolt, Blind, Design Elements,Metric Clevis - Engine Control Rod,Adjustable (Rev. 4) Stud - Fine Thread (Rev. 3) Spacer, Stepped, Swage Type(Rev. 2) Knob-Control 1.25 Spher.,Plastic (Rev. 3) R(1992) Post, Electrical- MechanicalEquipment, Stud Type, Metric Post, Electrical- MechanicalEquipment, Stud Type, Metric Post, Electrical- MechanicalEquipment, Stud Type, Metric Post, Electrical- MechanicalEquipment, Stud Type, Metric Post, Electrical- MechanicalEquipment, Swage Type, Metric (Rev. 1) Post, Electrical- MechanicalEquipment, Swage Type, Metric (Rev. 1) Post, Electrical- MechanicalEquipment, Swage Type, Metric (Rev. 1) Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987) Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987) Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987) Post, Electrical - MechanicalEquipment, Internal Thread Type, Metric R(1987)

Fasteners - Interlocking SlideFSC 5325 Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Cres, Lightweight, Metric Insert, Sandwich Panel, Moldedin, Thru Threaded, Self- Locking, Cres, Metric Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Cres, Metric Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Alum/Steel, Floating, Metric Insert, Sandwich Panel, Moldedin, Blind Threaded, Self-Locking, Cres/Cres, Floating, Metric Bearing, Plain, SelfLubricating, Self- Aligning Low Speed, Narrow, Grooved Outer Ring, -54Degrees C to 163 Degrees C, Metric (Rev. 1) Bearing, Plain, SelfLubricating, Self- Aligning Low Speed, Narrow, Chamfered Outer Ring, -54Degrees C to 163 Degrees C, Metric (Rev. 1) Bearing, Plain, SelfLubricating, Self- Aligning Low Speed, Wide, Grooved Outer Ring, -54 DegreesC to 163 Degrees C Metric Bearing, Plain, Self Lubricating,Self- Aligning Low Speed, Wide, Chamfered Outer Ring, -54 Degrees C to 163Degrees C Metric Bolt, Shoulder, Hexagon HeadA286 CRES 1100 MPa Tensile Metric Bolt, Shoulder, Hexagon HeadAlloy Steel 1100 MPa Tensile Metric Nut - Self Locking, Plate,Right Angle, 250 Degrees F FSC 5310; Revision 1 Terminal - Chain to Cable (forSwaging) (Rev. 3) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Pin-Escutcheon FSC 5315 Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992)

Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Cable Assembly Swaged TypeType I Terminals (Rev. 4) R(1992) Nut, Plain, Castellated,Airframe FSC 5310 Cable Assembly Swaged TypeType I & Type II Terminals (Rev. 5) R(1994) Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Nut, Plain, Hexagon, AirframeFSC 5310 Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Nut, Jam, Hexagon FSC 5310 Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Cable Assembly Swaged TypeType I and Type II Terminals (Rev. 5) R(1994) Nut, Plain, Castellated, ShearFSC 5310 Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994)

Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Cable Assembly Swaged TypeType II Terminals (Rev. 6) R(1994) Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu ,Close Tolerance, 95 KSI FsuFSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu FSC 5305; REV 14 Screw, Shear, 100 DegreeStandard Flush Head, Close Tolerance, 95 KSI Fsu Fsc 5305; REV 14 Rod - Control, Solid Steel(Rev. 5) Tube Assembly-Control AluminumAlloy with Riveted Threaded Rod Ends (Rev. 5) Tube Assembly-Control AluminumAlloy with Riveted Clevis and Threaded Rod Ends (Rev. 6) Tube-Control Aluminum Alloy(Rev. 4) Tube Assembly - Control Steelwith Welded Threaded Rod- Ends (Rev. 6) Tube Assembly - Control Steelwith Welded Clevis and Threaded Rod Ends (Rev. 6) Tube-Control Steel (Rev. 1)R(1992) Screw-100 Degree Oval RecessedHead Sheet Metal (Rev. 1) R(1992) Pin, Threaded Taper FSC 5315 Screw-100 Degree Oval RecessedHead Mach. (Coarse & Fine Thread) (Rev. 1) R(1992) Screw-82 Degree Oval RecessedHead-Mach. (Coarse & Fine Thread) R(1990) Washer-Flush Type Finishing(Rev. 5)

Nut - "U" Type SheetSpring (Rev. 2) R(1983) Nut - "U" Type CountersunkSheet Spring (Rev. 2) R(1983) Clamp - Ratchet, One Piece(Rev. 3) Clamp-Ratchet, Three Piece(Rev. 3) Latch, Push Button, Adjustable(Rev. 2) NAS Certification &Qualification of Nondestructive Test Personnel Hazardous Materials ManagementProgram (Rev. 2) Coupling - Tube FlaredFitting, Female Thread (Rev. 3) Pin - Pulley Guard Revision 9;FSC5315 Bolt, Machine, 125,000 psi -Crowned Hexagon Head, Adjusting Rev. 8 Plug Button Rev. 2 Nut Spacer, Plate - PlainRevision 8 Bolt - Hex Head, Brass,Electrical (Rev. 5) Nut-Instrument Mount (Rev. 8) Nut - "J" Type SheetSpring (Rev. 4) R(1992) Fasteners, Alloy SteelExternally Threaded, 95 KSI Fsu, 450 Degrees F Rev. 13 Nut Spacer, Plate -Countersunk (Rev. 8) Bolt - Stabilized,Non-Magnetic, CRES REV 5; FSC 5306 Screw, Machine, FillisterHead, Fine Thread FSC 5306 Nut, Drilled Jam Rev. 6 Washer-Rod End Locking (Rev.6) R(1989) Screw, Machine, 100 Degree,Flat Head Full Threaded, Alloy Steel (Rev. 8)

Fitting, Lubrication - .1250Inch Drive, Flush Type (Rev. 7) Screw-100 Degree CloseTolerance Flat Head 160,000 psi (Rev. 4) Gage-100 Degrees Flat Heat Flushness(Rev. 3) Coupling-Flexible, LowPressure, 450 Deg Air Line (Rev. 1) Coupling-Flexible, LowPressure, 250 Deg Air Line (Rev. 1) Coupling - Flexible, LowPressure Air Line Rev. 1 Screw - Washer Head FSC 5305;Revision 1 Rivet-Flat Head, Hi-Shear,Close Tolerance Shank Rev 5 Bushing, Sleeve - Press Fit,Undersize Inside Diameter (Rev. 5) Bushing - Flanged Press Fit -Undersize Inside Diameter (Rev. 7) Washer, Nonmetallic -Insulating, Electrical Rev. 4 Bolt - Universal Fitting (Rev.6) Elbow - Universal 15 Degrees(Rev. 3) Grommet, Plastic-SplitRevision 6; FSC 5325 Keys - Square and Rectangular(Rev. 5) Pins-Spring, Slotted &Coiled, Heavy Duty Rev. 7 Cam Follower Needle Bearing,High Strength Stud Revision 7; FSC 3110 Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Setscrew - Hexagon and FlutedSocket, Headless FSC 5305 Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5)

Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Bolt-Full Threaded, 160 ksiSteel, Drilled Head (Rev. 5) Clamp Assembly - ElectronicEquipment (Rev. 6) Pin, Rear Mounting -Electronic Equipment (Rev. 7) Nut, Self-Locking, Barrel,Floating, 180 kSI Ftu Revision 15; FSC5310 Retainer - Floating Barrel NutRev. 7 Coupling - Rigid TubeConnector, Aluminum (Rev. 5) R(1987) Ring - Rigid Tube Connector,Aluminum (Rev. 5) R(1987) Nut - Rigid Tube Connector,Aluminum (Rev. 5) R(1987) Coupling - Rigid TubeConnector, Corrosion Resistant Steel (Rev. 5) R(1988) Ring - Rigid Tube Connector,Corrosion Resistant Steel (Rev. 5) R(1988) Nut - Rigid Tube Connector,Corrosion Resistant Steel (Rev. 5) R(1988) Fittings - Rigid TubeConnector Flared Tube (Rev. 3) Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8) Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8) Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8) Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8) Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8) Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8)

Screw, Machine - Aircraft, PanHead, Cruciform Recess Full Threaded, Alloy Steel (Rev. 8) Pin, Straight, Headless -(Dowel) (Rev. 4) Packing, Preformed, StraightThread Tube Fitting Boss, Synthetic Lubricant Resistant (Rev. 2) Fastener-Recommended Shank,Hole and Head-To-Shank Fillet Radius Limits for (Rev. 6) R(1992) Washer, Flat - Reduced OutsideDiameter (Rev. 5) Fasteners, Titanium AlloyProcurement Specification Rev. 11 Hook, Support - ElectronicEquipment Clamp (NAS 573) (Rev. 2) Screw, Machine, Aircraft, PanHead, Cross Recess, Short Thread, 160,000 psi Alloy Steel (Rev. 7) R(1993) Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point- SteelExternal Wrenching Rev. 7 Bolt - Twelve Point- SteelExternal Wrenching Rev 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Bolt - Twelve Point - SteelExternal Wrenching Rev. 7

Bolt - Twelve Point - SteelExternal Wrenching Rev. 7 Coupling-Rigid Tube BulkheadConnector (Rev. 3) R(1988) Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306 Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306 Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306 Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306 Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306 Bolt, Close Tolerance-HexagonHead, Titanium, Short Thread, .190 to .500 Rev.9; FSC 5306 Bearing - Rod End, ExternalThread, Self-Aligning, Anti-Friction (Rev. 2) R(1992) Bearings, Ball and Roller, RodEnd, Anti-Friction, Airframe (Rev. 5) Screw, Machine, Flathead 100Degree Plain and Self- Locking (Rev. 10) Nut, Plain, Hexagon - SmallPattern, Nonstructural (Rev. 6) Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989) Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989) Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989) Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989) Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989) Bolt, Close Tolerance -Hexagon Head, Titanium, .190 to .500 (Rev. 6) R(1989) Nut, Self-Locking, Hexagon -Low Height (Rev. 9) R(1981) Screw, Miniature FillisterHead (Rev. 2) R(1992) Screw, Miniature Pan Head(Rev. 2) Screw, Miniature 100 Deg FlatHead (Rev. 2) R(1992)

Screw, Miniature Binding Head(Rev. 2) R(1992) Cap - Protective, ElectricalConnector (Rev. 3) R(1979) Cap - Protective, FlaredFitting (Rev. 2) R(1979) Plug - Protective, Flared Hoseor Tube Assembly (Rev. 3) Cap - Protective, FlaredFitting (Rev. 3) Plug - Protective, FlaredTube, Hose Assembly or MS33649 Boss (Rev. 3) Plug - Protective, ElectricalConnector (Rev. 2) R(1979) Cast Surface ComparisonStandard (Rev. 2) Cap - Protective, ElectricalConnector FSC 5340 Cap - Protective, FlaredFitting (Plastic) FSC 5340 Plug - Protective, Flared Hoseor Tube Assembly FSC 5340 Cap or Plug - Protective,Plain Tube or Hole FSC 5340 Cap - Protective FlaredFitting (Metal) FSC 5340 Plug - Protective, FlaredTube, Hose Assembly or MS33649 Boss FSC 5340 Plug - Protective, ElectricalConnector FSC 5340 Plug - Protective, FlarelessTube End (Plastic) FSC 5340 Cap - Beaded Hose Connection,Plastic, Protective FSC 5340 Plug, Pipe Thread, Protective,Dust and Moisture Seal FSC 5340 Caps, Protective, Dust andMoisture Seal for Beam Seal Fitting Protective, Dust and Moisture Seal forBeam Seal Fittings FSC 5340 Plugs, Protective, FlarelessTube End (Metal) Protective, Dust and Moisture Seal for Beam Seal FittingsFSC 5340 Plug - Tubing, Protective,Dust and Moisture Seal FSC 5340 Cap - Tubing, Protective, Dustand Moisture Seal FSC 5340

Plug, Machine Screw,Protective, Plastic FSC 5340 Cap, Pipe, Thread, Protective,Dust and Moisture Seal FSC 5340 Caps and Plugs, Protective,Dust and Moisture Seal FSC 5340 Cap-Protective, Beaded TubeAssembly Washer - Flat, Electrical FSC5310 Washer, Flat FSC 5310 Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Bolt - Machine Hexagon Head,A286 CRES (Rev. 7) Nut, Self-Locking, Plate - TwoLug, Regular Height, Non-Csk (Rev. 5) R(1992) Nut, Self-Locking, Plate - TwoLug, Regular Height, Csk (Rev. 4) R(1993) Nut, Self-Locking, Plate - OneLug, Regular Height, Non-Csk (Rev. 5) R(1992)

Nut, Self-Locking, Plate - OneLug, Regular Height, Csk (Rev. 4) R(1993) Nut, Self-Locking, Plate -Corner, Regular Height, Non- Csk (Rev. 5) R(1992) Nut, Self-Locking, Plate -Corner, Regular Height, Csk R(1993) Nut, Self-Locking, Plate - TwoLug, Regular Height, Bevel Seat (Rev. 4) R(1993) Nut, Self-Locking, Plate - OneLug, Regular Height, Non-Csk, Bevel Seat (Rev. 4) R(1993) Nut, Self-Locking, Plate - TwoLug, Regular Height, Floating (Rev. 6) R(1992) Nut, Self-Locking, Plate - OneLug, Regular Height, Non-Csk, Floating (Rev. 6) R(1992) Nut, Self-Locking, Plate -Right Angle, Regular Height, C'Bore, Floating (Rev. 5) R(1993) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking, GangChannel - Regular Height, Non-Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Non-Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Csk (Rev. 5) R(1992) Nut Assembly, Self-Locking,Gang Channel - Regular Height, Csk (Rev. 5) R(1992) Shackle-Anchor, Forged CarbonSteel, Round Pin (for Ground Support Equipment) (Rev. 2) R(1994) Shackle-Chain, Forged CarbonSteel, Screw Pin (for Ground Support Equipment) (Rev. 1) R(1994) Shackle-Chain, Forged CarbonSteel, Round Pin (for Ground Support Equipment) (Rev. 2) R(1994) Thimble, Heavy, Wrought Steel,Wire Cable (for Ground Support Equipment) (Rev. 3) Clip-Wire Rope, Forged CarbonSteel (for Ground Support Equipment) R(1994) Turnbuckle Assembly, ForgedCarbon Steel, Jaw and Jaw (for Ground Support Equip) Rev. 4

Sling Link, Welded, AlloySteel, Pear Shaped (for Ground Support Equipment) (Rev. 2) Grab Hook, Forged Alloy Steel,Direct Eye (for Ground Support Equipment) (Rev. 2) Safety Hook, Forged CarbonSteel, Snap, Direct Eye (for Ground Support Equipment) (Rev. 2) S Hook, Alloy Steel (forGround Support Equipment) (Rev. 2) Bolt, Eye, Assembly - ForgedCarbon Steel (Rev. 4) Rivet, Protruding Head,Hi-Shear (Supersedes NAS 178) (Rev. 4) R(1994) Rivet, Hi-Shear 100 DegreeFlush Close Tolerance Head (Supersedes NAS 177) (Rev. 4) Spacer, Sleeve-Rivet, HighTemperature, Non Magnetic Rev.6 Spacer, Sleeve-Screw and BoltHigh Temperature, Non Magnetic Rev. 8 Washer, Plain, Oversize forAluminum Terminals (Rev. 3) R(1981) Collar, Swage Locking forPull-Type and Stump-Type Lockbolts Rev. 12 Setscrew - Self-Locking Rev.12 Hook, Chain, S (Rev. 3) Streamer Assembly, Warning(Rev. 5) Rivet, Solid, 100 Deg. FlushShear Head, Aluminum Alloy, Titanium Columbium Alloy (Rev. 9) Washer-Bevel 9 1/2 Degrees(Rev. 2) Screw, Machine-Flat FillisterHead, Full Thread, Offset Cruciform Rev. 10 Screw, Machine-Flat 100 DegHead Full Thread, Offset Cruciform Rev. 9 Standoff, Threaded,Self-Clinching REV 1; FSC 5340 Insert, Screw Thread HelicalCoil, Free Running and Self-Locking, Tangless Revision 2 Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11)

Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine-Pan Head CloseTol, Short Thd, Offset Cruciform (Rev. 11) Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Screw, Machine, Pan Head,Modified, Close Tolerance, Short Thread, Offset Cruciform Rev. 9 Washer, Flat (Rev. 2) Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14

Screw, Machine-Flat 100 DegHead, Close Tolerance, Short Thread, Offset Cruciform, 160 ksi Rev. 14 Bolt, Shoulder, Hex Head,Close Tolerance, CRES-A286 Rev.3; FSC 5306 Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Screw, Self-Locking - Flat 100Deg Head, Shear, Offset Cruciform (Rev. 10) Washer, Dimpled, 100 Degrees(Rev. 5) Fastener, Chain (Rev. 1)R(1981) Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking-Pan Head,Shear, Offset Cruciform Rev. 10 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9

Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking, FlatFillister Head, Close Tolerance, Offset Cruciform Rev. 9 Screw, Self-Locking-Flat 100Deg Head, Full Thread (Rev. 12) Screw, Self-Locking, Pan Head,Full Thread Cruciform and Offset Cruciform Recess Rev. 16 Screw, Self-Locking-FlatFillister Head, Full Thread (Rev. 10) Locking Device Positive Index(Rev. 8) Shim - Miniature Anchor Nut(Rev. 3) Washer - 5052 Aluminum Alloy(Rev. 2) R(1989) Rivet-Solid Universal Head,A286 Corrosion Resistant Steel (Rev. 5) Rivet - Solid - 100 DegreeFlush Head A286 Corrosion Resistant Steel (Rev. 4) Rivet, Solid, 100 Deg FlushShear Head, A286 Corrosion Resistant Steel and Monel (Rev. 9) Chain - Bead Components andAssembly (Rev. 5) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9)

Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Bolt, 100 Degree CloseTolerance Head and Shank, 160,000 psi Short Thread (Rev. 9) Fitting, Tie Down Strap End(Rev. 2) R(1989) Strap Assembly - Tie Down(Rev. 2) Strap Assembly - Tie DownBuckle (Rev. 2) Screw, Pan Head SlottedDovetail Recess, Full Thread Self-Locking Optional Rev. 10 Bolt, Pan Head Self-LockingOptional Rev. 12 Screw, 100 Degree Flush HeadDovetail Slot Recess, Full Thread Self-Locking Optional REV 9; FSC 5305 Bolt, 100 Degree Flush HeadSelf-Locking Optional Rev. 11 Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981)

Bolt, Shear - Hexagon Head,Self Locking (Rev. 4) R(1981) Rivet - Solid, 100 DegreeFlush Head, Aluminum Alloy, MS 20426 Repair (Rev. 1) R(1981) Rivet - Solid, Universal Head,Aluminum Alloy, MS 20470 Repair (Rev. 1) R(1981) Bolt, Ring - Swivel (Rev. 4)R(1980) Washer - 7075 Aluminum AlloyFlat (Rev. 3) Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306 Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306 Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306 Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306 Bolt, Hex Head, CloseTolerance, Short Thread, Titanium Alloy Rev.5; FSC 5306 Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306 Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306 Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306 Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306 Bolt, Hex Head, CloseTolerance Titanium Alloy Rev.6; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306

Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Bolt, Twelve Point, ExternalWrenching, Titanium Alloy Rev.7; FSC 5306 Snap Hook (Rev. 5) Hook Snap, Bolt (Rev. 2)R(1980) Buckle - Web Strap, Light Duty(Rev. 3) R(1980) Safety Hook (Rev. 2) R(1982) Nut, Extended Washer, Hexagon- Self-Locking, Low Height, C'Bore (Rev. 5) R(1985) Nut, Hex and WasherSelf-Aligning, Self-Locking - Shear Pin (Rev. 3) R(1980) Nut, Self-Locking, Hexagon-LowHeight, Light Weight (Rev. 12) Pin - Threaded Shear 100Degree Csk Head Rev. 3 R(1982) Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982) Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982) Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982) Pin - Threaded Shear 100Degree Csk Head (Rev. 3) R(1982) Bolt, Shoulder - Hexagon HeadREV.4; FSC 5306 Screw - Brazier Head, Shoulder(Rev. 2) Screw - 100 Degree Flat Head,Shoulder (Rev. 2) Thumbscrew (Rev. 1) R(1991) Screw, Pan Head, AssembledWashers (Rev. 3) Fastener Test Methods Metric;Method 105, Stress Durability FSC 53GP

Fastener Test Methods, Metric;Method 107 Vibration FSC 53GP

Fastener Test Methods, Metric;Method 108 Tensile Strength FSC 53GP

Fastener Test Methods, Metric;Method 109 Stress Corrosion FSC 53GP

Fastener Test Methods, Metric;Method 111 Tension Fatigue FSC 53GP

Fastener Test Methods, Metric;Method 113 Double Shear Test FSC 53GP

Fastener Test Methods FSC 53GP Fastener Test Methods; Method1 Salt Spray FSC 53GP Fastener Test Methods; Method2 Interaction FSC 53GP Fastener Test Methods; Method3 Humidity FSC 53GP Fastener Test Methods; Method4 Lap Joint Shear FSC 53GP Fastener Test Methods; Method5 Stress Durability FSC 53GP Fastener Test Methods; Method6 Hardness FSC 53GP Fasteners Test Methods; Method7 Vibration 53GP Fastener Test Methods; Method8 Tensile Strength Rev 1; FSC 53GP Fastener Test Methods; Method9 Stress Corrosion Fastener Test Methods; Method10 Stress Rupture

Fastener Test Methods; Method11 Tension Fatigue FSC 53GP

Fastener Test Methods; Method12 Thickness of Metallic Coatings FSC 53GP

Fastener Test Methods; Method13 Double Shear Test FSC 53GP

Fastener Test Methods; Method14 Stress Durability Internally Threaded Fasteners 53GP

Fastener Test Methods; Method15 Torque - Tension 53GP

Fastener Test Methods; Method16 Clamping Force for Installation Formed Fasteners FSC 53GP

Fastener Test Methods; Method17 Stress Relaxation FSC 53GP

Fastener Test Methods; Method18 Elevated Temperature Tensile Strength FSC 53GP

Fastener Test Methods; Method19 Fastener Sealing FSC 53GP

Fastener Test Methods; Method20 Single Shear FSC 53GP

Fastener Test Methods; Method21 Shear Joint Fatigue Constant Amplitude FSC 53GP

Fastener Test Methods; Method22 Receptacle Push-Out, Panel Fasteners FSC 53GP

Fastener Test Methods; Method23 Tensile Strength of Panel Fasteners FSC 53GP

Fastener Test Methods; Method24 Receptacle Torque- Out, Panel Fasteners FSC 53GP

Fastener Test Methods; Method25 Driving Recess Torque Quality Conformance Test FSC 53GP

Fastener Test Methods; Method26 Structural Panel Fastener Lap Joint Shear FSC 53GP

Fastener Test Methods; Method27, Panel Fastener Sheet Pull-Up FSC 53GP

Fastener Test Methods; Method28, Elevated Temperature Double Shear FSC 53GP

Fastener Test Methods; Method29 Measurement Techniques for Determining Shank Expanding Characteristics ofDeformable Fasteners FSC 53GP Fastener Test Methods; Method30, Sheet Pull-Up of Blind Fasteners 53GP

Fastener Test Methods; Method31, Torque FSC 53GP

Rivet, Slug, Sleeveless (Rev.2) R(1991) Pin - Threaded ShearProtruding Head (Rev. 3) R(1991) Pin - Threaded ShearProtruding Head (Rev. 3) R(1991) Pin - Threaded ShearProtruding Head (Rev. 3) R(1991) Pin - Threaded ShearProtruding Head (Rev. 3) R(1991) Pin - Threaded ShearProtruding Head (Rev. 3) R(1991) Insert, Screw - ThreadedSpline (Rev. 2) Nut, Blind Rivet - Flathead,Internal Thread, Non- Locking (Free-Running) and Self-Locking (PrevailingTorque) Rev. 10; FSC 5310 Nut, Blind Rivet - CountersunkHead, Internal THD, Non- Locking (Free Running) or Self-Locking (PrevailingTorque) Rev. 10; FSC 5310 Pin, Quick Release, PositiveLocking Single & Double Acting (Rev. 6) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985)

Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Pin, Quick Release, PositiveLocking, Single, Acting (Rev. 4) R(1985) Identification of MaleThreaded Fasteners Rev 5 Caster, Light Duty, Rigid andSwivel Rev. 2 R(1981) Screw, Cap, Socket HeadUndrilled and Drilled, Plain and Self-Locking Alloy Steel,Corrosion-Resistant Steel and Heat-Resistant Steel, UNRF-3A Rev. 9 Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Screw, Cap, Socket HeadUndrilled and Drilled, Plain and Self-Locking Alloy Steel, Corrosion-Resistant Steel and Heat-Resistant Steel, UNRC-3A and UNRC-2A (Rev. 9) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985)

Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, Positive Locking,Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Pin, Quick Release, PositiveLocking, Double Acting (Rev. 5) R(1985) Grommet-Plastic Flip Type(Rev. 6) Duct, Air, Flexible andSemi-Rigid (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Duct-Air, Flexible, Helix WireSupported (Rev. 2) Fitting, Tie Down Strap End(Light Duty) (Rev. 2) Strap Assembly, Two PartAdjustable (Rev. 5) Strap Assembly, One Part (Rev.5) Strap Assembly, Loop Type(Rev. 6)

Insert-Threaded Metal,Lightweight, Self-Locking, and Non Self-Locking (Rev. 6) Insert - Threaded Metal,Heavy-Duty, Self-Locking, and Non Self-Locking Rev. 7 Chain-Welded Twist Link, ShortLink Pattern R(1980) Clamp-Loop, Nylon Rev. 5 Rivet-Blind, Protruding Head,Locked Spindle (Rev. 6) Rivet-Blind, 100 Degree FlushHead, Locked Spindle FSC 5320; Revision 7 Rivet - Blind, Self-PluggingMechanically Locked Spindle (Rev. 5) Washer, Radius (Rev. 1) Nut, Universal Port Fitting(Rev. 4) Gasket, Sealing, Custom Design(Rev. 2) R(1993) Pins and Collars, SwageLocking Revision 7; FSC 5320 Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4) Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4) Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4) Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4) Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4) Pin, Swage Locking, Steel, 100Degree Shear Head, Stump-Type (Rev. 4) Nut, Plain, Hexagon, DrilledJam, Thin (Rev. 2) Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993)

Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Shear, Stump-Type (Rev. 4) R(1993) Terminal - Strap, Cable EyeEnd and Fork End Rev. 2 Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Shear Head, Pull-Type (Rev. 2) R(1988) Lockwasher - Bearing Retaining(Rev. 5) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Shear, Pull-Type (Rev. 2) R(1988) Eyelet, Metallic, Electrical,Printed Circuit Board, Funnel Type R(1989) Chain, Weldless Flat Type LinkR(1980) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)R(1989) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)R(1989) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)R(1989) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2)R(1989) Clip, Spring Tension REV 2;FSC 5340 Clip, Spring Tension (Rev. 5) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981)

Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981) Pin, Swage Locking, Steel,Standard and Oversize, Protruding Head, Tension, Pull-Type (Rev. 2) R(1981) Nut, Self-Locking, Plate - TwoLug, Cap, Floating (Rev. 9) Nut, Self-Locking, Plate - TwoLug, Cap, Floating, Reduced Rivet Spacing (Rev. 9) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)R(1981) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)R(1981) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)R(1981) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)R(1981) Pin, Swage Locking, Steel,Standard and Oversize, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2)R(1981) Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel, 100Degree Head (MS24694), Tension, Stump-Type (Rev. 4) R(1993) Locknut Bearing Retaining(Rev. 6) Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993) Pin, Swage Locking, Steel,Protruding Head, Tension, Stump-Type (Rev. 4) R(1993) Nut Assembly, Self-Locking,Gang Channel - Low Height, C'Bore, Miniature Rev. 3 R(1979) Nut Assembly, Self-Locking,Gang Channel - Low Height, C'Bore, Miniature (Rev. 3) R(1979)

Radiographic Standard forClassification of Fusion Weld Discontinuities (Rev. 1) R(1981) Washers-Plastic and SyntheticRubber (Rev. 3) R(1989) Fastener Systems for AerospaceApplications FSC53GP Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type Rev. 2 R(1981) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2) R(1981) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2) R(1981) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 2) R(1981) Packing with Retainer (Rev. 3) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type Rev. 2 R(1989) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type Rev. 2 R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2) R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS24694), Tension, Stump-Type (Rev. 2) R(1989)

Knob, Hand, Ground SupportEquipment (Rev. 4) R(1981) Grommet, PTFE-Split Revision3; FSC 5325 Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4) Pin, Swage Locking, AluminumAlloy, Protruding Head, Tension, Stump-Type (Rev. 4) Gages, Pins and CollarInspection, Swage Locking Rev. 9 Reducer, Flared Tube (Rev. 2) Bolt, Flat Pan Head Rev. 13 Bolt, 100 Degree Flush Head,95 KSI Shear FSC 5306; Revision 11 Bolt, 100 Degree Flush ReducedHead (Rev. 9) Washer Plain and Csk, 1200Degrees F (Rev. 3) (Inactive) Washer - SealingRev. 3 Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Deg Head SlottedDovetail, .0312 Oversize, Alloy Steel, 160,000 psi (Rev. 9)

Packing, Ethylene PropylenePreformed O-Ring Phosphate Ester Resistant (-65 Degrees F to 250/300 DegreesF) Rev. 6 Packing, Ethylene PropylenePreformed, Straight Thread Tube Fitting Boss, Phosphate Ester Resistant -65Degrees F to 250/300 Degrees F (Rev. 4) Seal Element, Packing,Preformed, Ethylene Propylene Rubber Revision 4; FSC5330 Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Flat 100Degree Head, Short Thread, Offset Cruciform (Rev. 11) Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8 Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8 Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8 Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8 Screw, Machine - Pan Head,Short Thread, Offset Cruciform Rev. 8 Screw, Machine-Pan Head, CrossRecessed, Full Thread (Rev. 2) R(1988) Washer, Key, Dual Tab (Rev. 1)R(1988) Handle, Latching Internal& External Release Components & Assembly (Rev. 1) R(1980) Washer, Lock, Spring,Non-Magnetic (Rev. 2) R(1981) Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Protruding Head Self-Locking(Rev. 5)

Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Flush Head Self-Locking (Rev. 5) Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Protruding Head Self-Locking(Rev. 8) Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Flush Head Self-Locking (Rev. 6) Fastener - Blind, InternallyThreaded, External Sleeve, Lightweight, Protruding Head Self-Locking (Rev. 6) Fastener - Blind, InternallyThreaded, External Sleeve, Lightweight, Flush Head, Millable &Non-Millable, SelfLocking (Rev. 5) Fastener - Blind InternallyThreaded, External Sleeve Self-Locking Rev. 4 Washer, Lock-Spring, Helical,Hi-Collar (Rev. 1) R(1979) Strap, Retaining-Cushioned,Rectangular, Two-Piece Revision 5; FSC 5340 Rivet, Blind, Aluminum Sleeve,Mechanically Locked Spindle, Bulbed Rev 3; FSC 5320 Rivet, Blind, Monel andInconel Sleeve, Mechanically Locked Spindle, Bulbed REV 2 Hose Assembly,Tetrafluoroethylene High Temperature, Medium Pressure, Flared R(1981) Hose Assembly,Polytetrafluoroethylene High Temperature, High Pressure, Flared R(1982) Hose Assembly,Polytetrafluoroethylene High Temperature, High Pressure, Flareless R(1982) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Bolt, 100 Degree Flush Head.0156 Oversize Alloy Steel, 160,000 psi (Rev. 9) Strap, Retaining-Cushioned,Rectangular, Open Bottom Revision 4; FSC 5340

Clamp, Loop-Cushioned,Rectangular Revision 5; FSC 5340 Clamp, Loop-Cushioned, CenterMounting Revision 4; FSC 5340 Clamp, Loop-Cushioned,Elongated Revision 3; FSC 5340 Clamp, Loop-Cushioned Revision4; FSC 5340 Clamp, Loop-Cushioned, SaddleRevision 3; FSC 5340 Rivet, Blind, 100 DegreeReduced Flush Head, (NAS 1097 Head) Mechanically Locked Spindle (Rev. 2) Rivet, Blind, Protruding Head,Mechanically Locked Spindle (Rev. 2) Rivet - Blind, 100 DegreeFlush Head (MS20426 Head) Mechanically Locked Spindle (Rev. 2) Rivet, Blind, Self-Plugging,Mechanically Locked Spindle (Rev. 2) Pin-Rivet, Threaded, TaperShank, Shear Type 100 Degree Head (Rev. 1) Pin-Rivet, Threaded, TaperShank, Shear Type, 100 Degree Head - Oversize (Rev. 1) Nut, Self-Locking, CaptiveWasher, Shear Type, 450 Degrees F and 800 Degrees F (Rev. 3) Nut, Self-Locking, Aligning,450 Degrees F and 800 Degrees F (Rev. 4) Pin-Rivet, Threaded, TaperShank, Shear Type, Protruding Head (Rev. 1) Pin-Rivet, Threaded, TaperShank, Shear Type, Protruding Head - Oversize (Rev. 1) Fastener - Taper Shank (Rev.1) Nut, Blind, Serrated Head,Self-Locking, 450 Degrees F (Rev. 1) R(1981) Nut, Blind, Serrated Head,Self-Locking, Closed End, 450 Degrees F (Rev. 1) R(1981) Nut, Self-Locking, BlindRivet, Elliptical Head, 450 Degrees F (Rev. 4) Nut, Self-Locking, BlindRivet, Elliptical Head, Closed End, 450 Degrees F (Rev. 2) Nut Self-Locking, Blind Rivet,Elliptical Head Installation Data for (Rev. 1) Rivet - Blind, ProtrudingHead, Mechanically Locked Spindle, Bulbed (Rev. 3)

Rivet - Blind, 100 DegreeFlush Head, Mechanically Locked Spindle, Bulbed (Rev. 3) Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Flush Head, Self-Locking1/64" Oversize (Rev. 3) Fastener - Blind, InternallyThreaded, External Sleeve, General Purpose, Protruding Head Self-Locking1/64" Oversize (Rev. 3) Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Flush Head Self-Locking1/64" Oversize (Rev. 4) Fastener - Blind, InternallyThreaded, External Sleeve, High Temperature, Protruding Head Self-Locking1/64" Oversize (Rev. 4) Fastener - Blind, InternallyThreaded, External Sleeve Lightweight, Flush Head, Millable &Non-Millable, SelfLocking, 1/64" Oversize (Rev. 3) Fastener - Blind, InternallyThreaded, External Sleeve, Lightweight, Protruding Head Self-Locking1/64" Oversize (Rev. 3) Nut, Self-Locking, 450 DegreesF, Hexagon-Low Height 80 ksi (Rev. 1) Nut, Self Locking, ExtendedWasher, Double Hexagon, 220 ksi, 450 Degrees F (Rev. 1) Nut, Self-Locking, DoubleHexagon Shear 450 Deg F (Rev. 1) Fitting End, Flareless Acorn,Standard Dimensions for Revision 4; FSC 4730 Elbow, Reducer, 45 Degree,Flareless Tube to Swivel (Rev. 2) Elbow Reducer, 90 Degree,Flareless Tube to Swivel (Rev. 2) Tee, Reducer, Flareless Tubeto Swivel Swivel on Run (Rev. 2) Tee, Reducer, Flareless Tubeto Swivel Swivel on Side (Rev. 2) Nut, Self-Locking, Plate - TwoLug, Floating, 125 ksi Ftu, 450 Degrees F and 800 Degrees F (Rev. 1) Nut, Self-Locking, Plate -Corner, Counterbored, Floating, 125 ksi Ftu, 450 Degrees F and 800 Degrees F(Rev. 1) Bolt, Close Tolerance 100Degree Reduced Head Dovetail Slot (Rev. 2) Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed (Rev. 6) Rivet - Blind, 100 DEG FlushHead, Mechanically Locked Spindle, Bulbed Rev. 7 Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, 160 ksi, 450 Degrees F, 800 Degrees F (Rev. 1) R(1994) Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, 160 ksi, 450 Degrees F, 800 Degrees F (Rev. 1)R(1982)

Nut, Self-Locking, Plate,Corner, Low Height, C'Bored, 160 ksi, 450 Degrees F, 800 Degrees F (Rev. 1) R(1982) Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, Floating, 160 ksi, 450 Degrees F, 800 Degrees F(Rev. 1) R(1982) Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, Floating, 160 ksi, 450 Degrees F, 800 Degrees F(Rev. 1) R(1982) Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, Reduced Rivet Spacing, 160 ksi, 450 Degrees F, 800Degrees F (Rev. 1) R(1989) Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, Reduced Rivet Spacing, 160 ksi, 450 Degrees F, 800Degrees F (Rev. 1) R(1989) Nut, Self-Locking, Plate,Corner, Low Height, C'Bored, Reduced Rivet Spacing, 160 ksi, 450 Degrees F,800 Degrees F (Rev. 1) R(1989) Nut, Self-Locking, Plate, OneLug, Low Height, C'Bored, Side by Side, 160 ksi, 450 Degrees F, 800 Degrees F(Rev. 1) R(1989) Nut, Self-Locking, Plate, TwoLug, Low Height, C'Bored, Floating, Reduced Rivet Spacing, 160 ksi, 450Degrees F, 800 Degrees F (Rev. 1) R(1989) Nut, Self-Locking, Plate, TwoLug, Low Height, 100 Degree Csk, 160 ksi, 450 Degrees F, 800 Degrees F (Rev.1) R(1989) Nut, Self-Locking, Plate, OneLug, Low Height, 100 Degree Csk, 160 ksi, 450 Degrees F, 800 Degrees F (Rev.1) R(1989) Nut, Self-Locking, Plate,Corner, Low Height, 100 Degree Csk, 160 ksi, 450 Degrees F, 800 Degrees F(Rev. 1) R(1989) Nut Assembly, Self-Locking,Gang Channel, Low Height, C'Bored, 160 ksi, 250 Degrees F, 450 Degrees F, 800Degrees F (Rev. 1) R(1989) Nut Assembly, Self-Locking,Gang Channel, Low Height, Csk, 160 ksi, 250 Degrees F, 450 Degrees F, 800Degrees F (Rev. 1) R(1989) Bolt, External Wrenching, 220ksi Min Tensile, 132 ksi Min Shear H-11 Steel, 900 Degrees F (Rev. 2) R(1991) Clamp, Tube Mounting R(1994) Nut, Self-Locking, Plate, Sideby Side, Floating, Low Height, Reduced Rivet Spacing, C'Bored, 160 ksi, 450Degrees F, 800 Degrees F Rev. 1; FSC 5310 Bolt, 100 Degree Flush Head160,000 PSI UTS Rev. 4 Nut, Self-Locking, Plate - TwoLug, Floating, Variable Counterbore, Replaceable Nut Element 125 ksi Ftu, 450Degrees F and 800 Degrees F R(1990) Nut, Self-Locking, Plate - OneLug, Floating, Variable Counterbore, Replaceable Nut Element 125 ksi Ftu, 450Degrees F and 800 Degrees F R(1990) Nut, Self-Locking, Plate -Corner, Floating, Variable Counterbore, Replaceable Nut Element 125 ksi Ftu,450 Degrees F and 800 Degrees F R(1990) Nut - Self-Locking,Counterbore Replaceable Element R(1990) Retaining Clip - ReplaceableNut Plate R(1990)

Screw, Hex Head, CruciformRecess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev. 2) Screw, Hex Head, CruciformRecess, Full Thread A286 CRES, 160,000 PSI Tensile FSC 5305: Rev. 6 Nut, Plate, Self-LockingFloating, Spring Loaded R(1990) Nut, Self-Locking, ExtendedWasher, Double Hexagon, Alloy Steel, 180 ksi, 450 Degrees F (Rev. 1) R(1989) Nut, Self-Locking, ExtendedWasher, Double Hexagon, CRES, 180 KSI, 450 Degrees F and 800 Degrees FRevision 3; FSC5310 Post, Electrical-MechanicalEquipment, Stud Type (Rev. 3) Post, Electrical-MechanicalEquipment, Swage Type (Rev. 1) Post, Electrical-MechanicalEquipment (Rev. 2) Insert, Molded in, BlindThreaded, Self-Locking, Nonself-Locking, Sandwich Panel Revisiion 8; FSC 5325 Insert, Molded in, Threaded,Self-Locking, Nonself- Locking, Sandwich Panel Revision 7; FSC5325 Insert, Molded in, Csk andThru Clearance Hole, Sandwich Panel Revision 5; FSC5325 Insert, Molded in, BlindThreaded, Self-Locking, Nonself-Locking, Floating, Sandwich Panel Revision 7;FSC5325 Insert, Molded in, BlindThreaded, Self-Locking, Nonself-Locking, Lightweight, Sandwich Panel Revision8; FSC5325 Installation Tab and AlignmentTool for NAS1832, NAS1833, NAS1834, NAS1835, and NAS1836 Molded in InsertsFSC 5120; Rev. 4 Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989)

Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalDouble Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989) Stud Assembly - Threaded MetalSingle Step (Rev. 1) R(1989) Nut, Self-Locking, Plate - TwoLug, Deep Counterbore, Floating, 125 ksi Ftu, 450 Degrees & 800 Degrees F(Rev. 2) Nut Assembly, Torque Limiting,600 Degrees F Application .2500-28 UNJF-3B Thread (Rev. 2) Nut, Torque Limiting, 900Degrees F Application, 1/4- 28 UNJF-3B Thread R(1989) Insert, Self-Locking, ThermalBonded Honeycomb Panel (Rev. 1) R(1994) Rivet, Blind - GeneralPurpose, Bulbed, Self-Plugging, Mechanically-Locked-Spindle Rev. 4 Rivet, Blind - GeneralPurpose, Bulbed, Protruding Head, Mechanically-Locked-Spindle Rev. 7 Rivet, Blind-General Purpose,Bulbed, 100 Degree Flush Head, Mechanically-Locked-Spindle Rev. 8 Clamp, Hose, Band, TangentialWorm, Light Weight (Rev. 3) Clamp, Hose, Band, TangentialWorm, Light Weight (Rev. 1) R(1994) Clamp, Hose FSC 4730; Rev 1 Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5)

Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Flat, 100 Degrees Head,Torq-Set and Hi-Torque, 108 ksi Shear (Rev. 5) Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Brazier Head, OffsetCruciform and Dovetail Slot Rev. 7 Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6)

Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt, Flat, 100 Degree ReducedHead, Torq-Set and Hi- Torque, 108 ksi Shear (Rev. 6) Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 4 R(1989) Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989) Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989) Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989) Bolt-Lock, Tension, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 4) R(1989) Collar, Grooved, Pin-Rivet,Titanium, (Composite Applications) Pin-Rivet, Grooved; and Collarfor Composite Materials Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type

Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Pull-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) Protruding Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type Pin-Rivet, Grooved, Titanium(Composite Applications) 100 Degree Flush Head, Stump Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type Pin-Rivet, Grooved, Titanium(Composite Applications) 130 Degree Flush Head, Stump-Type Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy Rev. 4 R(1989) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989)

Bolt-Lock, Tension, 100 DegreeHead (MS24694), Pull- Type, Titanium Alloy (Rev. 4) R(1989) Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS20426), Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, 100 DegreeCrown Head, Standard and Oversize, Pull-Type, Titanium Alloy R(1994) Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Tension, 100 DegreeHead (MS24694), Stump- Type, Titanium Alloy (Rev. 3) R(1994) Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 3 R(1989) Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989)

Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989) Bolt-Lock, Shear, ProtrudingHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989) Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy Rev. 3 R(1989) Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989) Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989) Bolt-Lock, Shear, 100 DegreeHead, Standard and Oversize, Pull-Type, Titanium Alloy (Rev. 3) R(1989) Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, ProtrudingHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt-Lock, Shear, 100 DegreesHead, Stump-Type, Titanium Alloy (Rev. 7) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6)

Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, 100 Degree Head, OffsetCruciform, Close Tolerance, 180,000 psi (Rev. 6) Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, Shear, Hexagon Head, 180ksi REV 1; FSC 5306 Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head, OffsetCruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3)

Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, 100 Deg Flat Head,Offset Cruciform and Slotted Dovetail, 180 ksi (Rev. 3) Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, Brazier Head, OffsetCruciform and Slotted Dovetail, 180 KSI Rev. 4 Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Bolt, 100 Degrees CrownReduced Head, Offset Cruciform and Slotted Dovetail, 108 ksi Shear (Rev. 3) Grommets, Rubber, Hot-Oil andCoolant Resistant FSC 5325 Bolt-U (Rev. 2)

Bolt-U (Rev. 2) Bolt-U (Rev. 2) Bolt-U (Rev. 2) Bolt-U (Rev. 2) Bolt-U (Rev. 2) Bolt-Hook (Rev. 2) Bolt-Hook (Rev. 2) Bolt-Hook (Rev. 2) Bolt-Hook (Rev. 2) Bolt-Hook (Rev. 2) Bolt-Hook (Rev. 2) Screws, Machine, Pan Head,Cross-Recessed, Self- Sealing, Integral Silicone 0-Ring, Plain and Self-Locking FSC 5305 Screws, Machine, Pan Head,Cross-Recessed, Self- Sealing, Integral Fluorosilicone 0-Ring, Plain andSelfLocking FSC 5305 Nuts, Plain, Clinch-Flush FSC5310 Bolt-U, Strap Type (Rev. 2) Bolt-U, Strap Type (Rev. 2) Bolt-U, Strap Type (Rev. 2) Bolts, Self-Retaining,Positive Locking, Cres 90 KSI Fsu, 63 KSI Ftu, Hexagon Slotted Head, 450Degrees F and 650 Degrees F FSC 5306 Packaging of ElectricalCable-Cord-Wire Rev. 2 Electrical Harness - CableAssemblies, Packaging of Rev. 1 Screw Assembly, Panel FSC 5325 Aluminum Coating (Rev. 3)

Heat Sink,Electrical-Electronic Component, Semiconductor Devices, Formed FSC 5999 Heat Sink,Electrical-Electronic Component, Semiconductor Devices, for Dual Inline Packages(DIP) Pin, Crimp - Protruding ShearHead (Rev. 2) Pin, Crimp - 100 Degree FlushShear Head (Rev. 2) Pin, Crimp, Protruding TensionHead (Rev. 1) Pin, Crimp, 100 Degree CrownShear/Tension Head (Rev. 1) Fasteners; Panel;Nonstructural FSC 5325 Pin, Straight, Headed FSC 5315 Rivets, Structural, AluminumAlloy, Titanium Columbium Alloy General Specification for FSC 5320 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking. 160 Ksi Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, rediced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt,Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 8; FSC5306 Bolt, Tension, Hex Head, CloseTolerance, Alloy Steel, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking,160 KSI Ftu Revision 8; FSC5306

Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt, Tension Hex Head, CloseTolerance, A286 CRES, Short Thread,Reduced Major Thread Dia; Self-Locking andNonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread,Reduced Major Thread Dia; Self-Locking andNonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia, SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt, Tension Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160KSI Ftu Revision 7; FSC5305 Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread,Reduced Major Thread Dia; Self-Locking andNonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt,Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread DIA, SelfLockingand Nonlocking, 160 KSI Ftu Revision 7; FSC5305 Bolt, Tension, Hex Head, CloseTolerance, A286 CRES, Short Thread, Reduced Major Thread Dia; SelfLockingand Nonlocking, 160 KSI Ftu Revision 7, FSC5305 Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, Close Tolerance,Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5 Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC

Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread,Reduced Major Thread Diameter,Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5 Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt ,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking,160 KSI Ftu Revision 9, FSC5 Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt,Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC5 Bolt, Tension, Hex Head, CloseTolerance, 6AL-4V Titanium Alloy, Short Thread, Reduced Major ThreadDiameter, Self-Locking and Nonlocking, 160 KSI Ftu Revision 9, FSC Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, Alloy Steel, Long Thread, Self-Locking and Nonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8

Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, A286 CRES, Long Threads, Self-Locking and Nonlocking Rev. 8 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Fasteners, Externally ThreadedAlloy Steel, Corrosion Resistant Steel, Aluminum 60,000 PSI to 125,000 PSIRev.1; FSC 53GP Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Clamps, Instrument Mounting,Aircraft FSC 5340

Bolt, Hex Head, CloseTolerance, 6AL - 4V Titanium Alloy, Long Thread, Self - Locking andNonlocking Rev. 7 Pin, Swage Locking, pH13-8MoCRES, 100 Degree Crown Head, Shear, Pull-Type (Rev. 1) Pin, Swage Locking, pH13-8MoCRES, Protruding Head, Shear, Pull-Type (Rev. 1) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989) Pin, Swage Locking, Aluminum Alloy,100 Degree Head (MS20426), Tension, Stump-Type R(1989) Pin, Swage Locking, AluminumAlloy, 100 Degree Head (MS20426), Tension, Stump-Type R(1989) Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2) Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2) Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2) Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2) Pin, Swage Locking, Steel, 100Degree Head (MS20426), Tension, Stump-Type (Rev. 2) Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989) Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989) Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989) Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989) Pin, Swage Locking, Steel, 100Degree Crown Head, Tension, Pull-Type R(1989) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS24694), Tension, Pull-Type (Rev. 1)

Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Head (MS20426), Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, Protruding Head, Tension, Pull-Type (Rev. 1) Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear Head, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear, Stump-Type (Rev. 2)

Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, 100 Degree Shear/Tension Head, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2) Pin, Swage Locking, A-286CRES, Protruding Head, Shear/Tension, Pull-Type (Rev. 2) Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, 100 Degree Shear/Tension Head, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990)

Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990) Pin, Swage Locking, 108 ksiSteel, Protruding Head, Shear/Tension, Pull-Type (Rev. 1) R(1990) Recess, Ribbed Cruciform,Dimensions of Recess and Gages FSC 53GP; REV 8 Bit, Screwdriver, CruciformSpecification for (Rev. 2) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head, CruciformRecess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, Alloy Steel, Long Thread, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5)

Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, A286 CRES, Long Thread, Self-Locking andNonlocking (Rev. 5) Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6AL-4V Titanium Alloy, Long Thread, SelfLocking and Nonlocking Rev. 6 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head, CruciformRecess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3

Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Degree Head,Cruciform Recess Close Tolerance, Alloy Steel, Short Thread, Self-Locking andNonlocking Rev. 3 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Deg Head, CruciformRecess, Close Tolerance, A286 CRES, Short Thread, Self-Locking and NonlockingRev. 4 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5

Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, 100 Degree Head,Cruciform Recess, Close Tolerance, 6Al-4V Titanium Alloy, Short Thread, SelfLocking and Nonlocking Rev. 5 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Alloy Steel, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6

Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, A286 CRES, Self-Locking andNonlocking FSC 5306; Revision 6 Bolt, Internal Wrenching, 160KSI FTU Revision 1; FSC 5306 Screws, Structural, AircraftFSC 5305 Nut, Self-Locking, 1,200Degrees Fahrenheit FSC 5310 Bolt, Machine, 1200 DegreesFahrenheit FSC 5306 Bolt, Pan Head, Close Tolerance,Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V, Self-Locking andNonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and Nonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and Nonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and Nonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and Nonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V, Self-Lockingand Nonlocking Rev. 4 Bolt, Pan Head, CloseTolerance, Short Thread, Cruciform Recess, Titanium Alloy 6AL-4V,Self-Locking and Nonlocking Rev. 4 Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3) Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3) Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3) Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3) Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3) Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3)

Screw, Pan Head, CruciformRecess, Alloy Steel, Full Thread, Self-Locking and Nonlocking (Rev. 3) Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, A-286 CRES, Full Thread, Self-Locking and Non Locking Rev. 5 Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Pan Head, CruciformRecess, Titanium Alloy 6AL- 4V, Full Thread, Self- Locking and Nonlocking(Rev. 2) Screw, Machine, Washer Head,Full Thread, Phillips Recess, Alloy Steel (Rev. 2) Screw, Machine, Washer Head,Full Thread, Phillips Recess, Alloy Steel (Rev. 2) Screw, Machine, Washer Head,Full Thread, Phillips Recess, Alloy Steel (Rev. 2) Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread

Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, Alloy Steel, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Rivets, Blind, NonstructuralType FSC 5320; Rev. 1 Bolt, 100 Degree Reduced Head,Phillips Recess, Close Tolerance, 6AL-4V Titanium Alloy, Short Thread Bolt, 180 KSI Ftu and 180 KSIFsu, 450 Degrees F Protruding and Flush Head; General Specification for FSC5306

Inserts, Screw-Thread, HelicalCoil FSC 5325 Bolt, Alloy Steel, Shear andTensile (132 KSI Min Fsu and 220 KSI Min Fts), 450 Degrees F, Spline Drive,General Specification for FSC 5306 Bolts, Shear, Steel, 132 KSIFsu, 450 Degrees F FSC 5306 Bolt, Alloy Steel, Shear andTensile (156 KSI MIN Fsu and 260 KSI MIN Ftu), 450 Degrees F, ExternalWrenching, Flanged Head FSC 5306 Nuts, Self-Locking, AlloySteel, 260 KSI Ftu, 450 Degrees F, General Specification for FSC 5310 Nut, Self-Locking, AssembledWasher, Alloy Steel, 220 KSI Ftu, 450 Degrees F, (12-Spline Wrenching Element)FSC 5310 Fastener, Blind, HighStrength, Installation Formed Corrosion Resistant Steel, Heat Resistant Steeland Titanium General Specification for FSC 5320 Fasteners, Blind, HighStrength, Installation Formed, Corrosion Resistant and Heat Resistant Steeland Titanium, Design and Usage Limitations for FSC 5320 Fasteners, Blind, HighStrength, Corrosion Resistant and Heat Resistant Steel, Flush Head, Type II,Class 1 FSC 5320 Fasteners, Blind, Titanium,Flush Head, Type II, Class 2 FSC 5320 Fasteners, Blind, HighStrength, Corrosion Resistant and Heat Resistant Steel, Protruding Head, TypeII, Class 1 FSC 5320 Fasteners, Blind, Titanium,Protruding Head, Type II, Class 2 FSC 5320 Fasteners, Blind, HighStrength, Titanium/Cres, Protruding Head, Type I, Class 2 FSC 5320 Fasteners, Blind, HighStrength, Titanium/Cres, Flush Head, Type I, Class 2 Nut, Self-Locking, Steel, 260KSI Ftu, 450 Degrees F FSC 5310 Nuts, Alloy Steel, Shear andTensile, Self-Locking, (180 KSI Ftu 450 Degrees F), General Specification forFSC 5310 Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Alloy Steel, 160,000 psi Tensile (Rev.1)

Recess-Cross, Low TorqueDrive, Dimensions and Gage Dimensions for FSC 5305 Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, A-286 CRES, 160,000 psi Tensile (Rev.1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile (Rev. 1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile (Rev. 1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile (Rev. 1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile (Rev. 1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile (Rev. 1) Screw, Hex Head, OffsetCruciform-Ribbed Recess, Full Thread, Titanium Alloy 6AL-4V 160,000 psiTensile (Rev. 1) Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style A, Class 1, Code B and E FSC 5320;Rev 3 Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style A, Class 2, Code B and E FSC5320; Rev 3 Rivet-Blind, 100 Degree FlushShear Head, Mechanically Locked Spindle, Bulbed Style A, Class 3, Code B andE FSC 5320; Rev 3 Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style B, Class 1, Code B and E FSC 5320;Rev 3 Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style B, Class 2, Code B and E FSC5320; Rev 3 Rivet-Blind, Flanged DomeHead, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code B and E FSC5320; Rev 3 Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style A, Class 1, Code M REV 3; FSC 5320 Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style A, Class 2, Code M REV 3; FSC5320 Rivet-Blind, 100 Degree FlushShear Head, Mechanically Locked Spindle, Bulbed Style A, Class 3, Code M REV3; FSC 5320

Rivet-Blind, Protruding Head,Mechanically Locked Spindle, Bulbed Style B, Class 1, Code M and C REV 3; FSC5320 Rivet-Blind, 100 Degree FlushHead, Mechanically Locked Spindle, Bulbed Style B, Class 2, Code M and C REV3; FSC 5320 Rivet-Blind, Flanged DomeHead, Mechanically Locked Spindle, Bulbed Style B, Class 4, Code M REV 3; FSC5320 Pin, Spring, Tubular (Coiledand Slotted) FSC 5315 Nut, Self-Locking,Lightweight, Castellated, 450 Degrees F FSC5310 Nut, Self-Locking,Lightweight, Thin, Castellated, 450 Degree F FSC 5310 Washer, Flat, Round, CorrosionResisting Steel (For Electrical Applications) FSC 5310 Washer, Recessed CountersunkTwo Surfaces, for Use with Wheel Bolts and Nuts up to and Including 180 KSIFtu FSC 5310 Nut, Wheel, Self-Locking,Flanged, Steel, 180 KSI Ftu, 450 Degrees F, Spline Drive FSC 5310 Bolt, Wheel, Tension, Flanged,Steel, 180KSI Ftu, 450 Degrees F, External Spline Drive FSC 5306 Nut, Wheel, Self-Locking,Flanged Steel, 220 KSI Ftu, 450 Degrees F, Spline Drive FSC 5310 Washer, Recessed, CountersunkTwo Surfaces, for Use with Wheel Bolts and Nuts up to and Including 220 KSIFtu FSC 5310 Nut, Plate, Self-Locking,Floating, Two Lug, Reduced Rivet Spacing, Steel, (Polyamide Insert) 500Cycles Reuse, Replaceable Nut, 160 KSI Ftu, 450 Degrees F FSC 5310 Bolt, Tension: Nickel Alloy718; 220 KSI Ftu; External Wrenching, Spline Drive, Flanged Head Rev.1; FSC5306 Nut, Self-Locking, ExtendedWasher, Round, Nickel Alloy 718, 220 KSI Ftu, 450 Degrees and 800 Degrees F,Spine Drive FSC 5310 Washer, Countersunk and Plain,for Use with Bolts and Nuts Up to and Including 220 KSI Ftu FSC 5310 Recess - Offset Cruciform,Ribbed Dimensions of Recess, Gage and Driver for Rev.2; FSC 53GP Lock, Rod End, Extra Strength,High Profile Lug FSC 5340 Nut, Floating, Self Locking,Attached Retention Element (A.R.E.), 450 Degrees F, Steel, 125 KSI Ftu,Replaceable Nut Element FSC 5310 Nut, Floating, Self Locking,Attached Retention Element (A.R.E.), 450 Degrees F, Cres (A-286), 125 KSIFtu, Replaceable Nut Element FSC 5310 Nut Element, Replaceable,Attached Retention Element (A.R.E), 450 Degrees F, CRES (A-286), 125 KSI FtuFSC 5310 Nut Element, AttachedRetention Element (A.R.E.), 450 Degrees F, Steel, (AISI 1050 or 4130), 125KSI Ftu FSC 5310

Rivet, Solid, 120 DegreesFlush Interference Shear Head FSC 5320 Rivet, Solid, 120 Degree FlushInterference, Tension Type Head FSC 5320 Nut, Self-Locking, 450 DegreesF, Hexagon, Reduced Head Height, Ring Base, Corrosion Resistant Steel FSc5310 Clamp, Loop, Cushioned,Rectangular, Metric FSC 5340 Bolt, Wheel, Nickel Alloy 718,220 KSI Ftu, 132 KSI Fsu, 450 Degrees F, External Wrenching, Spline Drive,Flanged Head FSC 5306 Nut, Wheel, Self-Locking,Flanged, Nickel Alloy 718, 220 KSI Ftu, 450 Degrees F, Spline Drive FSC 5310 Nut, Self-Locking, Channel,Floating, Carbon Steel, 125 KSI, Ftu FSC 5310 Pin, Quick Release withWarning Streamer Assembly FSC 5315 Washer, Flat-Metal, RoundGeneral Purpose FSC 5310 Fasteners, ExternallyThreaded, Self-Locking Design and Usage Limitations for FSC 5305 Stud, ContinuousThread-(Bolt-Stud), B16 Alloy Steel, High Temperature Service (875 - 1000 F.)FSC 5307 Bolt, Machine, Regular Semi-FinishedHexagon Head, Copper-Silicon Alloy (Silicon Bronze), Unc-2A, NonMagneticFSC 5306 Bolts, Machine, Hexagon Head,Regular Semi-Finished, Aluminum Alloy, Unc-2A, Non-Magnetic FSC 5306 Bolts, Machine, Hexagon Head,Semifinished Corrosion Resisting Steel UNC-2A, Nonmagnetic FSC 5306 Screws, Machine, FlatCountersunk Head, Slotted, Copper-Silicon Alloy, UNC-2A, Nonmagnetic FSC 5305 Nut, Self-Locking,Hexagon-Thin, UNC-3B (Non Metallic Insert) Austenitic Corrosion ResistantSteel, Nonmetallic, 250 Degrees F FSC 5310 Grommet, Metallic, GeneralSpecification for FSC 5325 Grommet, Metallic, Plain, withToothed Washer (Type II) FSC 5325

Grommet, Metallic, Oblong,with Flat Washer (Type IV) FSC 5325

Grommet, Metallic, Oblong,with Raised Washer (Type V) FSC 5325

Rivet-Tubular, Oval Head FSC5320 Rivet, Tubular, 150 DegreeFlat Countersunk Head FSC 5320 Pin, Straight, Headless(Dowel) (.0002 over Nominal Size) FSC 5315 Pin, Straight, Headless(Dowel) (.001 Over Nominal Size) FSC 5315 Pin, Spring-Tubular, SlottedFSC 5315 Pin, Tapered, Plain FSC 5315 Screw, Cap, SocketHead-Hexagon, Corrosion Resistant Steel, UNC-3A FSC 5305 Screw, Cap, SocketHead-Hexagon, Corrosion Resistant Steel, UNF-3A FSC 5305 Fastener, Rotary,Quick-Operating, Flush Head, Floating Type, 2210 lbs min Tensile Strength Fastener, Rotary,Quick-Operating, Protruding Head Floating Type, 2210 lbs min Tensile Strength Nut, Self-Locking, Hexagon,Regular-Height, (Non- Metallic Insert) 250 Degrees F, Nickel-Copper Alloy FSC5310 Nut, Self-Locking, Hexagon,Regular Height, 250 Degrees F, (Non-Metallic Insert) Non-CorrosionResistantSteel FSC 5310 Nut, Self-Locking,Hexagon-Regular, 250 Degrees F, and 450 Degrees F (Non-Metallic Insert), 300Series Corrosion Resistant Steel FSC 5310 Fasteners, Screw Threaded,Descriptive Factor Symbols and Order of Notes for Engineering Documents forFSC 53GP Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, Button Handle FSC 5315 Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "T" Handle FSC5315 Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, "L" Handle FSC5315 Pin, Quick Release,Self-Retaining, Positive Locking, Single Acting, Ring Handle FSC 5315 Pin, Quick Release, Self-Retaining,Positive Locking, Double Acting, "T" Handle FSC 5315 Pin, Quick Release,Self-Retaining Positive Locking, Double Acting "L" Handle FSC 5315 Pin, Quick Release, PositiveLocking, Double Acting, Ring Handle FSC 5315 Setscrew, Hexagon Socket, CupPoint, 250 Degrees F, Self Locking Element, Alloy Steel, Cadmium Plated FSC5305

Setscrew, Hexagon Socket, CupPoint, 250 Degrees F, Self Locking Element, Corrosion Resisting Steel,Passivated FSC 5305 Setscrew, Hexagon Socket, ConePoint, 250 Degrees F, Self Locking, Element, Alloy Steel, Cadmium Plated FSC5305 Washer, Countersunk and Plain,High Strength FSC 5310 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolts, Internal Wrenching, 160Ksi Ftu and 96 Ksi Fsu FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306

Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Bolt, Machine, Hexagon Head,1200 Degrees F FSC 5306 Key, Machine - Rectangular inCross Section, Both Ends Square FSC 5315 Key, Machine-Square in CrossSection, Both Ends Square FSC5315 Key, Machine-Square in CrossSection, One End Square, Other End Round FSC 5315 Key, Machine-Square in CrossSection, Both Ends Round FSC 5315 Bolt, Machine, Aircraft,Drilled Head, Fine Thread FSC 5306 Bolt, Machine, Aircraft,Drilled Head, Coarse Thread FSC 5306; Revision 1 Grommets, Metallic, Plain andSpur, with Washers, Type I and Type III FSC 5325 Pin, Straight. Headed DrilledShank FSC5315 Rivet, Solid, Countersunk 100Degrees, Precision Head, Aluminum and Titanium Columbium Alloy FSC 5320 Rivet, Solid - 100 DegreeCountersunk Head, Carbon Steel, Corrosion-Resistant Steel, Monel and CopperFSC 5320 Rivet, Solid, Universal Head,Aluminum Alloy and Titanium Columbium Alloy FSC 5320 Nut, Self-Locking, Plate, TwoLug, 1200 Degrees F, 125 KSI Ftu FSC 5310 Rivet, Blind, Structural PullStem, Self-Plugging, Protruding Head, Type II FSC 5320 Rivet, Blind, Structural PullStem, Self-Plugging, 100 Degree Flush Head, Type II FSC 5320 Rivet, Blind, Nonstructural,Universal Head, Class 1 FSC 5320

Rivet, Blind, Nonstructural,100 Degree Flush Head FSC 5320 Rivet, Solid - Universal Head,Steel, Carbon and Steel, Corrosion - Resistant FSC 5320 Rivet, Solid-Universal Head,Brass, Copper, Nickel- Copper Alloy REV 1; FSC 5320 Eyelets, Metallic, and EyeletWashers, Metallic FSC 5325 Eyelets, Metallic, RolledFlange Type; and Eyelet Washer FSC 5325

Pin, Grooved, Headless,Longitudinal Groove FSC 5315 Wire, Safety or Lock FSC 9505 Nut, Castellated, Hexagon FSC5310 Nut, Self-Locking, 450 DegreesF, Reduced Hexagon, Reduced Height, Ring Base, Non-Corrosion Resistant SteelFSC 5310 Nut, Self-Locking, 800 DegreesF, Reduced Hexagon, Reduced Height, Ring Base, Corrosion Resistant Steel FSC5310 Nut, Self-Locking, Hexagon,Regular Height, 250 Degrees F, 125 KSI Ftu and 60 KSI Ftu FSC 5310 Nut, Self-LockingHexagon-Regular Height, 450 Degrees F, 125 KSI Ftu FSC 5310 Nut, Self-Locking,Hexagon-Regular Height, 800 Degrees F, 125 KSI Ftu FSC 5310 Nut, Self-Locking, Plate, TwoLug, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F FSC 5310 Nut, Self-Locking, Plate, TwoLug, 100 Degree CSK Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310 Nut, Self-Locking, Plate, TwoLug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800Degrees F FSC 5310 Nut, Self-Locking, Plate, OneLug, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310 Nut, Self-Locking, Plate, OneLug, Low Height, Cres, 125 KSI Ftu, 450 Degrees and 800 Degrees F FSC5310 Nut, Self-Locking, Plate, OneLug, 100 Degree CSK, Low Height, Alloy Steel, 125 KSI Ftu, 450 Degrees FFSC5310 Nut, Self-Locking, Plate, OneLug, 100 Degree CSK, Low Height, Cres, 125 KSI Ftu, 450 Deg. & 800 Deg F.FSC5310 Nut, Self-Locking, Plate,Corner, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310

Nut, Self-Locking, Plate,Corner, Low Height, Cres, 125KSI Ftu, 450 Degrees F & 800 Degrees F FSC5310 Nut, Self-Locking, Plate,Corner, 100 Degrees CSK Low Height, Alloy Steel, 125 KSI Ftu, 450 Degrees FFSC 5310 Nut, Self-Locking, Plate,Corner, 100 Degree CSK, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and 800Degrees F FSC 5310 Nut, Self-Locking, Plate, TwoLug, Floating, Low Height Steel, 125 KSI Ftu, 450 Degrees F FSC 5310 Nut, Self-Locking, Plate, TwoLug, Floating, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and 800 Degrees FFSC 5310 Nut, Self-Locking, Plate, OneLug, Floating, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310 Nut, Self-Locking GangChannel, Floating, Low Height, Steel, 125 KSI Ftu, 250 Degrees F FSC 5310 Nut, Self-Locking GangChannel, Floating, Low Height, Steel, 125 KSI Ftu, 450 Degrees F FSC 5310 Nut, Self-Locking, Channel,Floating, Low Height, Cres, 125KSI Ftu, 450 Degrees F and 800 Degrees F Nut, Self-Locking, GangChannel, 100 Degree CSK, Floating, Low Height, Steel, 125 KSI Ftu, 250Degrees F FSC 5310 Nut, Self-Locking GangChannel, 100 Degree CSK, Floating, Low Height, Steel, 125 KSI Ftu, 450Degrees F FSC 5310 Nut, Self-Locking GangChannel, 100 Degree CSK, Floating, Low Height, CRES, 125 KSI Ftu, 450 DegreesF & 800 Degrees F FSC 5310 Nuts, Self-Locking, Plate,Two-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees FFSC 5310 Nut, Self-Locking, Plate, TwoLug, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and800 Degrees F FSC 5310 Nut, Self-Locking, Plate,One-Lug, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees FFSC 5310 Nut, Self-Locking, Plate, One-Lug,Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F and 800Degrees F FSC 5310 Nut, Self-Locking, Plate,Corner, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450 Degrees FRevision 1; FSC 5310 Nut, Self-Locking, Plate,Corner, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450 Degrees F& 800 Degrees F FSC 5310 Nut, Self-Locking, Plate, TwoLug, Floating, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450Degrees F FSC 5310; Rev. 1 Nut, Self-Locking, Plate, TwoLug, Floating, Reduced Rivet Spacing, Low Height, CRES, 125 KSI Ftu, 450Degrees F and 800 Degrees F Revision 1; FSC 5310 Nut, Self-Locking, Plate, TwoLug, Floating, Non- Metallic Insert, Steel 125 KSI Ftu, 250 Degrees F FSC5310 Nut, Self-Locking, Plate, TwoLug, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F FSC 5310

Nut, Self-Locking, GangChannel, Non-Metallic Insert, 125 KSI Ftu, 250 Degrees F FSC 5310 Nut, Self-Locking, Plate, OneLug, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F FSC5310 Nut, Self-Locking, Plate,Corner, Non-Metallic Insert, Steel, 125 KSI Ftu, 250 Degrees F FSC 5310 Nut, Self-Locking, Plate, OneLug, Floating, Non- Metallic Insert, Steel 125 KSI Ftu, 250 Degrees F FSC5310 Nut, Self-Locking, Hexagon,Non-Metallic Insert, Low Height, 250 Degrees F FSC 5310 Nut, Self-Locking, Steel, 220KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element FSC 5310 Nut, Self-Locking, Steel, 260KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element FSC 5310 Nut, Self-Locking, Plate,Side, by Side, Reduced Rivet Spacing, Low Height, Steel, 125 KSI Ftu, 450Degrees F FSC 5310 Nut, Self-Locking, Plate, Sideby Side Reduced Rivet Spacing, Low Height, Cres, 125 KSI Ftu, 450 Degrees& 800 Degrees F. FSC5310 Screw, Self-Locking, 250Degrees F, Steel, 55 KSI Ftu, 100 Degree Flat Head, Cross Recessed FSC 5305 Bolt, Self-Locking, 250Degrees F; Steel, 75 KSI Fsu, 125 KSI Ftu, Hex Head FSC 5306 Bolt, Self-Locking, 250Degrees F, Cres, 48 KSI Fsu, 80 KSI Ftu, Hex Head FSC 5306 Bolt, Self-Locking, 75 KSIFsu, 125 KSI Ftu Pan Head, Cross Recessed FSC 5306 Bolt, Self-Locking, 250Degrees F., Cres, 48 KSI Fsu, 80 KSI Ftu Pan Head, Cross Recessed FSC 5306 Bolt, Self-Retaining, PositiveLocking, Cres 90 KSI Fsu, 63 KSI Ftu, Pan Head, 450 Degrees F & 650Degrees F FSC 5306 Bolt, Self-Retaining, PositiveLocking, Cres 90 KSI Ftu, 63 KSI, 100 Degree Flush Head, 450 Degrees F &650 Degrees F FSC 5306 Wrenching Element, External,Hexagon, for Threaded Fasteners FSC 53GP Nut, Self-Locking, Steel, 180KSI Ftu, 450 Degrees F, Flanged, MS33787 Wrenching Element FSC 5310 Bolt, Tension, Steel, 180 KSIFtu, 450 Degrees F External Wrenching, Spline Drive, Flanged FSC 5306 Fasteners, Blind, HighStrength, Pull Type, Positive Mechanical Lock, 100 Degree Flush Head,Corrosion Resisting Steel, 95 KSI Fsu FSC 5320 Pin, Straight, Headless(Dowel), General Specification for FSC 5315

Pin, Straight, Headless,(Dowel) (.0002 Over Size), Cres 303 FSC 5315

Pin, Straight, Headless,(Dowel) (.0002 Under Size), Cres 303 FSC 5315

Screw, Tapping, 100 DegreeFlat Head, Spaced Thread FSC 5305 Insert, Screw Thread, Coarseand Fine, Screw Locking, Helical Coil, Cres FSC 5325 Nut, Self-Locking,Castellated, Hexagon Counterbored, Assembled Washer, 250 Degrees FNon-Metallic Insert (for Self-Retaining Bolts) FSC 5310 Nut, Self-Locking,Castellated, Hexagon - 800 Degrees F FSC 5310 Nut, Castellated, Hexagon,Counterbored Assembled Washer, 450 Degrees F, (for Self-Retaining Bolts) FSC5310 Nut, Self-Locking, Hexagon,Thin, 450 Degrees F, 80 KSI Ftu FSC 5310 Bolt, Tension, Steel, ExternalWrenching, Flanged, 12 - Point, 180 KSI Ftu, 450 Degrees F FSC5306 Screws, Self Locking, 250Degrees F, Cylindrical Head Hexagonal Wrenching Socket, Alloy Steel, 160 KSIFtu (Socket Head Cap Screws) FSC 5305 Grommet, Plastic, Edging FSC5325 Screw, Machine - Steel,Drilled Double Hexagon, Extended Washer, .164-36 (Mil-S-8879 Thread) FSC 5306 Screws, Self Locking, 250Degrees F, Cylindrical Head, Hexagonal Wrenching Socket, Corrosion ResistingSteel 80 KSI Ftu (Socket Head Cap Screws) FSC 5306 Bolt, Tension, Steel, 260 KSIFtu, 450 Degrees F, External Wrenching, Spline Drive, Flanged Head FSC 5306 Bolt, Tension, Steel, 220 KSIFtu, 450 Degrees F External Wrenching, Spline Drive, Flanged Head FSC 5306 Screw, Drive, Round Head, TypeU, Steel, Carbon, Cadmium Plated FSC 5305 Clamp, Loop-Aluminum, Plainand Cushioned FSC 5340 Stud - Style I SnapslideFastener FSC 5325 Stud - Style III SnapslideFastener FSC 5325 Stud - Style IV SnapslideFastener FSC5325 Fastener Installation -Snapslide FSC 5325

Fastener - Snapslide FSC 5325 Clamp, Loop-Steel, Plain andCushioned FSC 5340 Clamp, Loop-Double, Cable orTube, Steel, Plain and Cushioned FSC 5340 Nut, Plain, Hexagon-Azimuth(with Lockwire Holes) FSC 5310 Screw, Shoulder, HexagonSocket-Head and Slotted-Head General Specification for FSC 5305 Grommet, Edging FSC 5325 Grommet, Composite, Edging FSC5325

Grommet, Cushion Composite,Edging FSC 5325

Fastener, Rotary,Quick-Operating, High-Strength FSC 5325 Pin, Quick-Release,Self-Retaining, Positive-Locking FSC 5315 Bolt, Self-Retaining, PositiveLocking FSC 5306 Clip, Solid, Spring TensionFSC 5340

Clip, Single Slot, SpringTension FSC 5340

Clip, Double Slot, SpringTension FSC 5340

Casters, Rigid and Swivel,Precision Pneumatic Tired FSC 5340 Casters, Rigid and Swivel,Precision Spring Mounted FSC 5340 Screw, Tapping-Thread Cutting,Type BF or BT, Pan Head, Cross-Recessed, Carbon Steel FSC 5305 Screw, Tapping-Thread Cutting,Type D, F, G, or T, Flat 82 Degree Countersunk Head, Cross-Recessed, CarbonSteel FSC 5305 Screw, Tapping - ThreadCutting, Types D, F, G or T, Flat 82 Degrees Countersunk Head,Cross-Recessed, Corrosion-Resisting Steel FSC 5305

Screw, Tapping-Thread Cutting,Types D,F,G, or T, Pan Head, Cross Recessed, Steel, Carbon Cadmium Plated FSC5305 Screw, Tapping-Thread Cutting,Types D,F,G or T, Pan Head, Cross Recessed, Corrosion Resisting Steel FSC 5305 Screw, Tapping, ThreadCutting-Types D,F,G and T, Approximate Hole Sizes for FSC 5305 Rivet, Blind-Countersunk Head,Drive Type FSC 5320 Pin, Cotter, (Split) FSC 5315 Screw, Cap, Socket Head, FlatCountersunk, 82 Degree, Alloy Steel, UNC-3A FSC 5305 Screw, Cap, Socket Head, FlatCountersunk, 82 Degree, Corrosion-Resisting Steel, UNC-3A FSC 5305 Screw, Cap, Socket Head,Hexagon, Drilled Corrosion- Resisting Steel (UNF-3A) FSC 5305 Screw, Cap, Socket Head,Hexagon, Drilled Corrosion- Resisting Steel (UNC-3A) FSC 5305 Screw, Cap, Socket Head,Hexagon, Drilled Alloy Steel, (UNC-3A) FSC 5305 Screw, Cap, Socket Head,Hexagon, Drilled Alloy Steel, (UNF-3A) FSC 5305 Pin, Tapered, Plain FSC 5315 Screw, Machine, FlatCountersunk Head, 100 Degree, Cross Recessed, UNC-2A and UNF-2A FSC 5305 Screw, Machine, FlatCountersunk Head, 100 Degree, Structural, Cross Recessed, UNC-3A and UNF-3AFSC 5305 Nut, Self-Locking, 250 DegreesF, 450 Degrees F, and 800 Degrees F FSC 5310 Screw, Externally RelievedBody FSC 5305 Fasteners, Straight, Headed,Swaged Collar Limitations for Use of FSC 5325 Washers, for Use with AircraftAluminum Terminals FSC 5310 Screw, Machine-Pan Head,Structural, Cross Recessed FSC 5305; Rev. 1 Clevis, Rod End - Turnbuckle(General Purpose) FSC 5340 Rivet, Blind, Drive Type FSC5320 Key, Woodruff, Alloy Steel FSC5315

Bolt, Self-Retaining, ImpedanceType, 95 KSI Fsu, Hex Head, 450 Degrees F FSC 5306 Screw, Close Tolerance, 95 KSIFsu, Flush Head, 450 Degrees F FSC 5305 Bolt, Hook - Turnbuckle(General Purpose) FSC 5306 Turnbuckle, Body (GeneralPurpose) FSC 5340 Clevis, Rod End-Adjusting,Wide and Narrow Forks FSC 5340 Fasteners, Snap, Style 2(Regular Wire Spring Clamp Type) FSC 5325 Fasteners, Snap, Style 2A(Small Wire Spring Clamp Type) FSC 5325 Fasteners, Snap, Style 4(Three Way Locking Type) FSC 5325 Fasteners, Snap, Style 5(Scalloped Button Head Type) FSC5325 Fasteners, Snap, Style 7(Rivet Type) FSC 5325 Clamp, Instrument Mounting,Aircraft FSC 5340 Safety Wiring and CotterPinning, General Practices for FSC 53GP Pins, Spring, FunctionalLimitations of FSC 5315 Nonstructural Rivets for BlindAttachment; Limitations for Design and Usage FSC 5320 Nut, Self-Locking, Aircraft,Reliability and Maintainability Usage Requirements for FSC 5310 Rivets, Blind, Structural,Mechanically Locked and Friction Retainer Spindle, (Reliability andMaintainability) Design and Construction Requirement for FSC 5320 Bolts, Self-Retaining,Aircraft, Reliability and Maintainability, Design and Usage Requirements forFSC 5306 Nut, Sheet Spring, InstrumentMounting FSC 5310 Screw - Installation andLimitations for Usage of Thread Cutting and Thread Forming FSC 5305 Recess-Dovetail, Slot andConical Dovetail Slot, Dimensions of Recess, Gage and Driver for FSC 53GP Recess - Offset Cruciform,Dimensions of Recess, Gage and Driver for Rev.2; FSC 53GP Strap, Retaining, One Hole forPipe, Rigid Conduit and Cable FSC 5340

Screw, Machine-82 Degree FlatCountersunk Head, Cross- Recessed, Carbon Steel, Cadmiun Plated, UNC-2A FSC5305 Screw, Machine - 82 DegreeFlat Countersunk Head, Cross-Recessed, Carbon Steel, Cadmium Plated, UNF2AFSC 5305 Screw, Machine-FlatCountersunk Head, 82 Degree, Cross- Recessed, Brass, UNC-2A FSC 5305 Screw, Machine-FlatCountersunk Head, 82 Degree, Cross- Recessed, Brass, Black Chemical Finish,UNF-2A FSC 5305 Screw, Machine-Flat CountersunkHead, 82 Degree, Cross- Recessed, Aluminum Alloy, Anodic Coated, UNC2A FSC5305 Screw, Machine-Pan Head,Cross-Recessed, Carbon Steel, Cadmium Plated, UNC-2A FSC 5305 Screw, Machine-Pan Head, CrossRecessed, Carbon Steel, Cadmium Plated, UNF-2A (IN./MM) FSC 5305 Screw, Machine-Pan Head, CrossRecessed, Brass, UNC-2A FSC 5305 Screw, Machine-Pan Head,Cross-Recessed, Brass, UNF-2A FSC 5305 Screw, Machine-DrilledFillister Head, Slotted, Brass, Black Chemical Finish, UNC-2A FSC 5305 Screw, Machine-DrilledFillister Head, Slotted, Brass, Black Chemical Finish, UNF-2A FSC 5305 Screw, Machine-DrilledFillister Head, Slotted, Corrosion Resisting Steel, Passivated, UNC-2A FSC5305 Screw, Machine-DrilledFillister Head, Slotted, Corrosion Resisting Steel, Passivated, UNF-2A FSC5305 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivated, UNC-2A FSC5305 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Corrosion Resisting, Passivated, UNF-2A FSC5305 Pin, Grooved,Headless-Longitudinal Taper Groove, Carbon Steel FSC 5315 Pin, Grooved,Headless-Longitudinal Taper Groove, Corrosion-Resisting Steel FSC 5315 Pin, Grooved,Headless-Longitudinal Straight Groove, Carbon Steel FSC 5315 Pin, Grooved, Headless-LongitudinalStraight Groove, Corrosion-Resisting Steel FSC 5315 Pin, Grooved,Headless-Longitudinal Center Groove, Carbon Steel FSC 5315 Pin, Grooved,Headless-Longitudinal Center Groove, Corrosion-Resisting Steel FSC 5315 Bolt, Square Neck, Round Head(Carriage) Steel, Cadmium or Zinc Plated, Unc-2A FSC 5306

Key, Wooddruff, Steel, Alloy,with Keyway and Key Slot Dimensions FSC 5315 Handle, Bail-Chest, SurfaceMounting Countersunk Holes FSC 5340 Handle, Bail Chest, RecessedFSC 5340 Handle, Bail-Chest, SurfaceMounting, Plain Holes FSC 5340 Clevis, Rod, End-Adjustableand Plain, Steel FSC 5340 Pin, Spring-Tubular, Coiled,Heavy Duty FSC 5315 Handle, Bow FSC 5340 Snap Hooks, Wire Body, FixedLoop Eye, Flat Spring Closure, with Retainer FSC 5340

Snap Hooks, Wire Body, FixedLoop Eye, Side Retaining Closure FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye, with Roller, Flat Spring Closure, Narrow Mouth FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye with Roller, Flat Spring Closure, Wide Mouth FSC 5340

Snap Hooks, Cast Body, FixedEye, Sliding Bolt Closure FSC 5340

Snap Hooks, Cast Body, SwivelEye, Sliding Bolt Closure FSC 5340

Snap Hooks, Cast Body, LoopEye Swivel FSC 5340

Snap Hooks, Cast Body, RoundEye Swivel FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye, Trigger Closure FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye W/O Roller, Flat Spring Closure, Wide Mouth FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye W/O Roller, Flat Spring Closure, Light Duty FSC 5340

Snap Hooks, Cast Body, FixedRound Eye W/O Roller, Flat Spring Closure FSC 5340

Snap Hooks, Cast Body, FixedLoop Eye W/O Roller, Flat Spring Closure, Narrow Mouth FSC 5340

Snap Hooks, Cast Body, OpenEye, Sliding Bolt Closure FSC 5340

Washers, Shouldered, Recessed,Saddle, Concave and Convex, General Specification for FSC 5310 Washer, Shouldered, Polyamide(Nylon) FSC 5310

Washer, Shouldered,Polytetrafluoroethylene FSC 5310

Washer, Recessed, AluminumAlloy FSC 5310

Washer, Saddle, Steel, CarbonFSC 5310

Washer, Saddle, Aluminum AlloyFSC 5310

Washer, Convex, Steel, AlloyFSC 5310

Washer, Concave, Steel, AlloyFSC 5310

Washer, Shouldered, PhenolicFSC 5310

Bolt, Eye, GeneralSpecification for FSC 5306 Stud, Locked in, Ring Locked,Serrated, General Specification for FSC 5307 Stud, Locked in - key Locked,General Specification for FSC 5307

Nut, Plain, Clinch and Nut,Self-Locking, Clinch General Specification for FSC 5310 Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Hexagon Head and Shank, Swage Clinch) FSC 5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self Clinching, Knurled Collar, 450 Degrees F and 600Degrees F) FSC 5310 Nut, Plain, Self-ClinchingFlush FSC 5310

Nut, Self-Locking, Clinch,(Swage-Clinching, Knurled Shank, Miniature, 250 Degrees F) FSC 5310

Nut, Self-Locking, Clinch,(Swage-Clinching, Knurled Shank, Miniature, 450 Degrees F or 800 Degrees F)FSC 5310 Nut, Plain Clinch and Nut, Self-LockingClinch (Knurled Collar, Miniature, 450 Degrees F) FSC 5310

Nut, Self-Locking, Clinch(Swage-Clinching, Knurled Shank, 250 Degrees F, UNJC-3B) FSC 5310

Nut, Self-Locking, Clinch(Swage-Clinching, Knurled Shank, 250 Degrees F, UNJF-3B) FSC 5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self- Clinching) Round FSC 5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Floating, 400 Degrees F FSC 5310

Nut, Plain, Spline, Round FSC5310

Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self- Clinching, Knurled Collar, Miniature, Floating,450 Degrees F and 600 Degrees F) FSC 5310 Nut, Plain, Clinch and Nut,Self-Locking, Clinch (Self- Clinching, Knurled Collar, Floating, 450 DegreesF and 600 Degrees F) FSC 5310 Rivets, Blind, Self-PluggingPreparation for and Installation of FSC 5320

Rivets, Buck Type, Preparationfor and Installation of FSC 5320 Setscrew-Hexagon Socket, CupPoint, Corrosion- Resisting Steel, Passivated, UNC-3A, Plain and Self-Locking FSC 5305 Setscrew-Hexagon Socket, CupPoint, Corrosion- Resisting Steel, Passivated, UNF-3A, Plain and Self LockingFSC 5305 Setscrew-Hexagon Socket, FlatPoint, Corrosion- Resisting Steel, Passivated, UNC-3A, Plain and Self-Locking FSC 5305 Setscrew-Hexagon Socket, FlatPoint, Corrosion- Resisting Steel, Passivated, UNF-3A, Plain and Self-Locking FSC 5305 Setscrew-Hexagon Socket, ConePoint, Corrosion- Resisting Steel, Passivated, UNC-3A & UNF-3A, Plain andSelf Locking FSC 5305 Setscrew-Hexagon Socket,Half-Dog Point, Corrosion- Resisting Steel, Passivated, UNC-3A FSC 5305 Setscrew-Hexagon Socket,Half-Dog Point, Corrosion- Resisting Steel, Passivated, UNF-3A FSC 5305 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Head Drilled for Locking Wire, Steel, Grade 5,Cadmium Plated, UNF-2A, Plain and Self-Locking FSC 5305 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Grade 5,Cadmium Plated, UNC-2A FSC 5305 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Corrosion-Resisting, Passivated, UNC-2A FSC 5305 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Shank Drilled for Cotter Pin, Steel, Corrosion-Resisting, Passivated, UNF-2A FSC 5305 Pin, Straight, Headless FSC5315 Bolt, Machine, Hex Head, FullyThreaded, Fine Thread, Metric FSC 5306 Bolt, Machine, Hex Head, FullyThreaded, Fine Thread, Metric FSC 5306 Screw, Cap, Hex Head, FullyThreaded - Metric FSC 5306 Screw, Shoulder, Slotted-Head,Corrosion-Resistant Steel FSC 5305 Screw, Shoulder, Slotted-Head,Hexagon, Corrosion- Resistant Steel FSC 5305 Stud, Locked in, Key-Locked,Lightweight FSC 5307 Stud, Locked in, Key-Locked,Heavy Duty FSC 5307 Pin, Straight, Steel-Drill RodFSC 5315 Screw, Tapping-Thread Forming,Type AB, Hexagon Head, Slotted FSC 5305

Screw, Tapping-HighPerformance, Thread Rolling, Types SF, SW and TT, Pan Head, Cross RecessedFSC 5305 Stud - Plain, General PurposeFSC5307 Screw, Tapping-HighPerformance, Zone Hardened Structural Thread Rolling, Hexagon Washer Head FSC5305 Screw, Externally RelievedBody, Panhead, Cross- Recessed, Corrosion-Resisting Steel, UNC-2A FSC 5305 Pin, Spring-Tubular, Coiled,Standard Duty Pin, Straight-Headless;Drilled for Cotter Pins FSC 5315 Strap, Retaining, One Hole forThin Wall Conduit (EMT) FSC 5340 Screw, Machine Pan-Head,Cross-Recessed, Corrosion Resisting Steel, UNF-2A FSC 5305 Screw, Machine, FlatCountersunk Head, 82 Degrees, Cross-Recessed, Corrosion-Resistant Steel,UNC-2A FSC 5305 Setscrew - Hexagon Socket, CupPoint, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking FSC 5305 Setscrew, Hexagon Socket, CupPoint, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking FSC 5305 Setscrew - Hexagon Socket,Flat Point, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking FSC5305 Setscrew - Hexagon Socket,Flat Point, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking FSC5305 Setscrew - Hexagon Socket,Cone Point, Alloy Steel, Cadmium Plated, UNC-3A, Plain and Self-Locking FSC5305 Setscrew - Hexagon Socket,Cone Point, Alloy Steel, Cadmium Plated, UNF-3A, Plain and Self-Locking FSC5305 Screw, Shoulder - Socket Head,Hexagon, Alloy Steel, Cadmium Plated, UNC-3A FSC 5305 Setscrew-Hexagon Socket,Half-Dog Point, Alloy Steel, Cadmium Plated, UNF-3A FSC 5305 Setscrew-Hexagon Socket,Half-Dog Point, Alloy Steel, Cadmium Plated, UNC-3A FSC 5305 Setscrew-Hexagon Socket, OvalPoint, Alloy Steel, Cadmium Plated, UNC-3A FSC 5305 Setscrew-Hexagon Socket, OvalPoint, Alloy Steel, Cadmium Plated, UNF-3A FSC 5305 Pin, Spring-Tubular, Coiled,Light Duty FSC 5315

Stud, Self-Locking, FlushHead, Ribbed Clinch Type FSC 5307

Stud, Self-Locking, Flush andProtruding Head FSC 5307

Stud, Self-Clinching, FlushHead, Hex Clinch Type FSC 5307

Stud, Self-Locking, ConcealedHead, Knurled Clinch Type FSC 5307

Stud, Self-Locking, ConcealedHead, Hex Clinch Type FSC 5307

Stud, Self-Locking, BroachingType FSC 5307

Fasteners, Blind, High Strength,Installation Formed, Alloy Steel; General Specifications for FSC 5320 Fasteners, Blind, HighStrength, Installation Formed, Alloy Steel; Design and Usage Limitations forFSC 5320

Fasteners, Blind, High Strength,Installation Formed, Threaded, Self Locking, 100 Degree Flush Head, 450Degree F, Alloy Steel 112 KSI Fus FSC 5320 Fasteners, Blind, HighStrength, Installation Formed, Threaded, Self-Locking, Protruding Head; 450Degrees F, Alloy Steel, 112 KSI, Fsu FSC 5320 Screws, Machine, Self-Sealing,Integral O-Ring FSC 5305 Bolt, Self-Retaining,Impedance Type FSC 5306 Rivet, Titanium, Bimetal 95KSI Fsu General Specifications for FSC 5320 Rivet, Titanium, Bimetal, 95KSI Fsu, Protruding Head, Type I FSC 5320

Rivet, Titanium, Bimetal 95KSI Fsu 100 Degree Tension Crown Head, Type II FSC 5320

Rivet, Titanium, Bimetal, 95KSI Fsu, 100 Degree Reduced Flush Crown Head, Type III FSC 5320

Nuts (Fasteners), InternallyThreaded, Preload Locking, 450 Degrees F, 800 Degrees F and 1200 Degrees F,General Specification for FSC 5310 Nut (Fastener), InternallyThreaded, Hexagon, Reduced Height 125 KSI and 200 KSI Ftu, 450 Degrees F FSC5310 Nut, Preload Locking, ExtendedWasher, Hexagon, Reduced Height, CRES, 125 KSI, 450 Degrees F and 1200Degrees F FSC 5310 Clamp Assembly, Saddle-Type,Cushion, General Specification for FSC 5340 Clamp Assembly, Saddle-Type,Cushioned, NBR Rubber, 321 Cres, 275 Degrees F, Fuel Resistant, GeneralPurpose FSC 5340 Clamp Assembly, Saddle-Type,Cushioned, EPR Rubber, 321 Cres, 275 Degrees F, General Purpose FSC 5340

Clamp Assembly, Saddle-Type,Cushioned, Silcone Fabric, Reinforced 321 Cres, 500 Degrees F, GeneralPurpose FSC 5340 Clamp Assembly, Saddle-Type,Cushioned, Ptfe, 321 Cres, -320 Degrees F to 450 Degrees F, General PurposeFSC 5340 Bolt, Nickel Alloy 718,Tension, High Strength, (125 KSI Fsu and 220 KSI Ftu), High Temperature,Spline Drive General Specification for FSC 5306 Bits, Screwdriver, RibbedGeneral Specification for FSC 5120 Bit, Screwdriver, RibbedCruciform, Insert Type, External Hexagon Shank, Manually Driven FSC 5120

Bit, Screwdriver, RibbedCruciform, Long Shank, External Hexagon Shank, Power Driven FSC 5120

Bit, Screwdriver, RibbedOffset Cruciform, External Hexagon Shank, Power Driven FSC 5120

Bit, Screwdriver, RibbedOffset Cruciform, Long Shank, External Hexagon Shank FSC 5120

Bit, Screwdriver, Insert Type,Ribbed, Offset Cruciform, External Hexagon Shank, Manually Driven FSC 5120

Nut, Self-Locking, SplineDrive, Assembled Washer, Nickel Alloy 718, 220 KSI Ftu, 900 Degrees F,General Specification for FSC 5310

Nut, Captive Washer,Self-Locking, Nickel Ally 718, 220 KSI Ftu, 900 Degree (12-Spline) WrenchingElement FSC 5310 Fastener, Blind, HighStrength, Pull Type, Positive Mechanical Lock, 100 Degree Flush Head, AlloySteel, 112 K.S.I. Fsu FSC 5320 Fastener, Blind, HighStrength, Pull Type, Positive Mechanical Lock, Protruding Head, Alloy Steel,112 K.S.I. Fsu FSC 5320 Nut, Self-Locking, Steel, 160KSI, 450 Degrees F 12 Point, Captive Washer FSC 5310 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNC-2A FSC 5305;Revision 1 Screw, Cap, Hexagon Head(Finished Hexagon Bolt), Steel, Grade 5, Cadmium Plated, UNF-2A FSC 5305;Revision 1 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325

Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325

Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, CRES Helical CoilCoarse Thread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil CoarseThread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil CoarseThread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil CoarseThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 2-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil CoarseThread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325

Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil CoarseThread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical CoilCoarse Thread, 3 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 1-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325

Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, Cres Helical Coil FineThread, 2-1/2 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325

Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325

Insert, CRES Helical Coil FineThread, 3 Dia Nominal Length FSC 5325 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, Corrosion ResistantSteel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315

Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Pin - Spring, CorrosionResistant Steel FSC 5315 Standard for AerodynamicDecelerator and Parachute Drawings Space Operations and SupportDocumentation Recommended Practice for PartsManagement Recommended Practice forAlphanumeric Computer-Output Microforms-Operational Practices for Inspectionand Quality Control Glossary of DocumentTechnologies Silver Recovery Techniques Standard Recommended Practice-Production, Inspection, and Quality Assurance of First-Generation, SilverMicroforms of Documents

Standard Test Target for Usein Microfilming Source Document Engineering Graphics on 35 mm MicrofilmR(1987) 35 mm Planetary Cameras(Top-Light) - Procedures for Determining Illumination Uniformity ofMicrofilming Engineering Drawings Errata; Amendment 1 - 1998 Standard Recommended Practice- Microrecording of Engineering Source Documents on 35mm Microfilm Dimensions for Reels Used for16 mm and 35 mm Microfilm Recommended Practice -Operational Procedures - Inspection and Quality Control of DuplicateMicroforms of Documents and from COM Test Procedure for Duplicating35 mm Diazo Microfilm Aperture Cards Addendum - 1996 Code of Standard Practice forSteel Buildings and Bridges Allowable Stress DesignSpecification for Structural Joints Using ASTM A325 or A490 Bolts Specification for StructuralSteel Buildings Allowable Stress Design and Plastic Design with Commentary Test Methods for Air CurtainUnits Application of Sone Ratingsfor Non-Ducted Air Moving Devices Application Sound Power LevelRatings for Fans Application Manual for AirLouvers Certified Ratings Program forAir Control Devices (Withdrawn) Photography (Film)- Safety Photographic Film *NOT CURRENT DOCUMENT (Withdrawn) Dimensions for70-mm Film Magazines and Film for Still-Picture Cameras; (Revised andRedesignated to ANSI/NAPM IT1.39-1994) *NOT CURRENT DOCUMENT R(1988) (Withdrawn) Requirements forPhotographic Filing Enclosures for Storing Processed Photographic Films,Plates, and Papers *NOT CURRENT DOCUMENT (Withdrawn) 55-Gallon(280-Liter) Tight-Head Universal Steel Drums (DOT-17E, UFC-Rule 40, NMFC-Item 260) *NOT CURRENT DOCUMENT (Withdrawn) 55-Gallon(280-Liter) Tight-Head Universal Steel Drums (DOT-5B) *NOT CURRENT DOCUMENT (Withdrawn) 55-Gallon(280-Liter) Full-Removable-Head Universal Steel Drums (DOT-17H, UFC-Rule 40,NMFC - Item 260) *NOT CURRENT DOCUMENT (Withdrawn) 16-Gallon(61-Liter) Full-Removable-Head Lug-Cover Universal Steel Drums (UFC-Rule 40,NMFC - Item 260) *NOT CURRENT DOCUMENT (Withdrawn) 5-Gallon(19-Liter) Tight-Head Universal Steel Drums (DOT-17E, DOT-37B60, UFC-Rule 40,NMFC - Item 260) *NOT CURRENT DOCUMENT (Withdrawn) 16-Gallon(61-Liter) Full-Removable-Headl Universal Steel Drums (UFC-Rule 40, NMFCItem260) *NOT CURRENT DOCUMENT (Withdrawn) 5-Gallon(19-Liter) Nesting Lug-Cover Universal Steel Pails (DOT-37A80, DOT-37A60,UFCRule 40, NMFC-Item 260) *NOT CURRENT DOCUMENT (Withdrawn) Photography(Sensitometry) - Density Measurements - Geometric Conditions for TransmissionDensity (Revision and Consolidation of ANSI PH2.19- 1976 and PH2 (Withdrawn) Method forDetermining the Speeds of Monochrome Photographic Negative-Films for AerialPhotography *NOT CURRENT DOCUMENT R(1977) Photography (Films) - AerialFilms/Spools/Containers - Dimensions Revision, Consolidation, andRedesignation of ANSI PH1.2-1979; ANSI PH1.10-1981; and ANSI PH1.46- 19 Woodworking Machinery - SafetyRequirements (WMMA O1.1) Calibration of Microphones,Method for R(1986)

Laboratory StandardMicrophones, Specs. for R(1986) (Withdrawn) Requirements forRound Metal Motor Oil Cans *NOT CURRENT DOCUMENT (Withdrawn) 201.5 X 904.5Grease Cartridge *NOT CURRENT DOCUMENT (Withdrawn) Specifications forRound Composite Motor Oil Cans *NOT CURRENT DOCUMENT (Withdrawn) Financial Services- Financial Transaction Cards *NOT CURRENT DOCUMENT (Withdrawn) Machine Tools -Hydraulic Presses - Safety Requirements for Construction, Care, and Use Warning Symbols - RadiationSymbol Photography (Sensitometry) -Black-and-White Continuous-Tone Papers - Determination of ISO Speed and Rangefor Printing R(1989) Method for Determining Speedof Photographic Negative Materials (Monochrome, Continuous- Tone) R(1986) Photography - Direct-ExposureMedical and Dental Radiographic Film/Process Combinations - Determination ofISO Speed and Average Gradient (Withdrawn) Dimensions ofProjectable Image Area on 16- mm Motion-Picture Film *NOT CURRENT DOCUMENT (Withdrawn) Dimensions for35-mm Motion-Picture Film Perforated BH *NOT CURRENT DOCUMENT (Withdrawn) Dimensions for16-mm Motion-Picture Film Perforated 1R *NOT CURRENT DOCUMENT (Withdrawn) Dimensions for16-mm Motion-Picture Film Perforated 2R *NOT CURRENT DOCUMENT (Withdrawn) Dimensions for35-mm Motion-Picture Film Perforated KS *NOT CURRENT DOCUMENT (Withdrawn) Position,Dimensions and Reproducing Speed of Magnetic Sound Record on 8-mm Type SMotionPicture Film *NOT CURRENT DOCUMENT Methods for TestingPhotographic Enlargers R(1992) Methods of Designating andMeasuring Focal Lengths and Focal Distances of Photographic Lenses R(1987) Shutter Tests forStill-Picture Cameras R(1978) Method for Testing OpticalPerformance of Slide and Filmstrip Projectors with Built-in Small ScreensR(1988) Photography - Camera Lenses -Determination of ISO Colour Contribution Index (ISO/CCI) Definitions, Methods ofTesting, and Specifications for Appearance Imperfections of Optical Elementsand Assemblies R(1991) Specification for GeneralPurpose Cards for Information Processing Eleven-Sixteenths-InchPerforated Paper Tape for Information Interchange R(1995) Interchange Rolls ofPerforated Tape for Information Interchange R(1995) Unrecorded Single-DiskCartridge (Front Loading, 2200 bpi), General, Physical, and MagneticRequirements R(1993) Programming Language PL/I ISO6160: 1979 R(1993) Information Systems -Unrecorded Magnetic Tape Cartridge for Information Interchange - 0.250 Inch(6.30 mm), 1600 bpi (63 bpmm), Phase Encoded R(1997) Unrecorded Eleven-Disk Pack -General, Physical, and Magnetic Requirements R(1995) Information Systems -Unrecorded Magnetic Tape Cartridge for Information Interchange - 0.250 Inch(6.30 mm), 6400 - 10 000 ftpi (252-394 ftpmm) R(1997)

Information Systems -Helical-Scan Digital Computer Tape Cartridge, for Information Interchange(3.81-mm (0.150-in) Digital Data Storage (DDS) Recorded Format) R(1997 Information Systems - Helical-ScanDigital Computer Tape Cartridge for Information Interchange (3.81mm(0.150-in) Data/DAT Recorded Format) R(1997) (Withdrawn) Requirements forElectrical Control for AC High-Voltage Circuit Breakers Rated on aSymmetrical Current Basis or a Total Current Basis *NOT CURRENT DOCUME (Withdrawn) Transformers -Pad- Mounted Compartmental- Type, Self-Cooled, Three-Phase DistributionTransformers for Use with Separable Insulated High- Voltage Connect Wood Poles - Specificationsand Dimensions (Withdrawn) Dimensions ofAttachment Plugs and Receptacles for Marine Ship-to-Shore Use for Small CraftSupplement to C73-1973; *NOT CURRENT DOCUMENT Safety Requirements for theUse, Care and Protection of Abrasive Wheels Addendum B7.1A - 1995 (Withdrawn) Tracheal TubeConnectors and Adapters; DOCUMENT Correction - January 1982 *NOT CURRENTDOCUMENT (Withdrawn) AnestheticEquipment - Oropharyngeal and Nasopharyngeal Airways *NOT CURRENT DOCUMENT (Withdrawn) AnestheticEquipment - Tracheal Tubes *NOT CURRENT DOCUMENT (Withdrawn) Ophthalmics -Prescription Ophthalmic Lenses - Recommendations *NOT CURRENT DOCUMENT Commercial Laundry and DrycleaningOperations - Safety Requirements (Withdrawn) Electric PowerSystems and Equipment - Voltage Ratings (60 Hertz) ANSI/NEMA C84.1-1995 Imaging Materials - ProcessedSilver- Gelatin Type Black- and-White Film - Specifications for StabilityANSI/ISO 10602-1995 Imaging Materials -Photographic Film and Paper - Determination of Curl ANSI/ISO 4330 -1994 Fundamentals Governing theDesign and Operation of Local Exhaust Systems R(1991) Surface and Air Vehicles -Unit-Load Heights for Palletized Loads R(1997) Machine Tools - MechanicalPower Presses - Safety Requirements for Construction, Care, and Use R(1994) Machine Tools - Power PressBrakes - Safety Requirements for Construction, Care, and Use R(1994) Machine Tools - Ironworkers -Safety Requirements for Construction, Care, and Use R(1994) Machine Tools - Lathes -Safety Requirements for Construction, Care, and Use R(1994) Machine Tools - Drilling,Milling, and Boring Machines - Safety Requirements for Construction, Care,and Use R(1994) Safety Requirements for theConstruction, Care, and Use of Grinding Machines R(1987) Machine Tools - Metal SawingMachines - Safety Requirements for Construction, Care, and Use Machine Tools - Gear- CuttingMachines - Safety Requirements for Construction, Care, and Use R(1994) Machine Tools - Single- andMultiple-Spindle Automatic Bar and Chucking Machines - Safety Requirementsfor Construction, Care, and Use R(1998) Machine Tools - Pipe, Tube,and Shape Bending Machines - Safety Requirements for Construction, Care, andUse R(1994) (Withdrawn) Liquid-in-GlassThermometers - General - Purpose Laboratory Use; Correction-April 1984 *NOTCURRENT DOCUMENT

Ladders - Portable Metal -Safety Requirements Electrical Power Insulators -Test Methods R(1996) (Withdrawn) Insulators -Wet-Process Porcelain and Toughened Glass - Suspension Type Still Active,Copyright Transferred to Nema Wet Process PorcelainInsulators - Spool Type R(1995) Wet-Process PorcelainInsulators - Strain Type R(1995) Wet-Process PorcelainInsulators - Low- and Medium- Voltage Types R(1995) Wet-Process PorcelainInsulators - Apparatus, Cap and Pin Type R(1995) Certification - Third-PartyCertification Programs for Products, Processes, and Services Revision of ANSIZ34.1 - 1987 Certification -Self-Certification by Producer or Supplier AC High-Voltage CircuitBreakers Rated on a Symmetrical Current Basis - Specifications Guide Distribution Oil Cutouts andFuse Links, Specs. for R(1992) Specifications for Power Fusesand Fuse Disconnecting Switches R(1992) Distribution FuseDisconnecting Switches, Fuse Supports, and Current-Limiting Fuses, Specs. forSupplement C37.47A-1983, Correction-January 1984 R(1992) (Withdrawn) Switchgear - UnitSubstations - Requirements Still Active, Copyright Transferred to NemaR(1995) Electrical Analog IndicatingInstruments, Requirements for R(1992) Requirements for Salient-PoleSynchronous Generators and Generator/Motors for Hydraulic TurbineApplications R(1989) Rotating Electrical Machinery- Cylindrical- Rotor Synchronous Generators Supersedes ANSI/IEEE C50.13-77 Transformers - 230 kV andBelow 833/958 Through 8333/10 417 kVA, Single-Phase, and 750/862 Through 60000/ 80 000/100 000 kVA, Three-Phase Without Load Tap Changing; Conformance Requirements forLiquid-Filled Transformers Used in Unit Installations, Including UnitSubstations Terminal Markings andConnections for Distribution and Power Transformers R(1993) Hazardous Industrial Chemicals- Walk-Behind Mowers and Ride-On Machines with Mowers - Safety Specifications Transformers - Pad-Mounted,Compartmental-Type, Self- Cooled, Single-Phase Distribution Transformers withSeparable Insulated High-Voltage Connectors; High Voltage, 3 Specifications for Shapes andSizes of Grinding Wheels, and for Shapes, Sizes and Identification of MountedWheels Specifications for Shapes andSizes of Diamond Grinding Wheels, Hand Hones, and Mounted Wheels Specifications for the Size ofAbrasive Grain - Grinding Wheels, Polishing and General Industrial Uses Markings for IdentifyingGrinding Wheels and Other Bonded Abrasives R(1995) Grading of Certain AbrasiveGrain on Coated Abrasive Products, Specs. for Correction-December 1977 Fluorescent Lamps -Rapid-Start Types - Dimensional and Electrical Characteristics suppC78.1C-1994; Supp C78.1D-1995; Supp C78.1E-1996; Supp C78.1F-1996; SuppC78.1G Fluorescent Lamps -Rapid-Start Types - Dimensional and Electrical Characteristics SuppC78.1C-1994; Supp C78.1D-1995; Supp C78.1E-1996; Supp C78.1F-1996; SuppC78.1G Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics R(1996)

Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics See NEMA forSupplements C78.2B-1992; C78.2C-1993; C78.2D-1994; C78.2E-1995; C78. 10W, 13W, 18W, and 26WSingle-Ended Quad Tube Preheat- Start Fluorescent Lamps with Internal Meansof Starting - Specifications 10W, 13W, 18W, and 26WSingle-Ended Quad Tube Preheat- Start Fluorescent Lamps with Internal Meansof Starting - Specifications Fluorescent Lamps -Instant-Start and Cold-Cathode Types - Dimensional and ElectricalCharacteristics R(1996) Fluorescent Lamps -Instant-Start and Cold-Cathode Types - Dimensional and ElectricalCharacteristics R(1996) Electric Lamps - 750-Watt,120-Volt Self-Ballasted Mercury Lamps R(1995) Electric Lamps - 160-Watt120-Volt B87 Self-Ballasted Mercury Lamps R(1995) Electric Lamps - DNFProjection Lamp R(1995) Electric Lamps - CBAProjection Lamp R(1995) Electric Lamps - EJLProjection Lamp R(1995) Electric Lamps - ELBProjection Lamp R(1995) Electric Lamps - DDMProjection Lamp R(1994) Electric Lamps - DEDProjection Lamp R(1994) (Withdrawn) Electric Lamps -FHS Projection Lamps Still Active, Copyright Transferred to Nema R(1995) Specifications for FluorescentLamp Starters Correction - May 1972 R(1994) Aluminum Rigid Conduit - (ARC) Electrical Lamp Bases PartialRevision and Consolidation of ANSI C81.10-76,C81.20-76,C81.30-76, C81.4R(1996) Electrical Lamp Bases R(1996) Electrical Lamp Bases;Contents, Foreword, and Annexes A and B Electrical Lamp Bases;Contents, Foreword, and Annexes A and B Fluorescent Lamp Ballasts -Methods of Measurement R(1995) Practice for - Occupationaland Educational Eye and Face Protection Supplement ANSI Z87.1A - 1989 Respiratory Protection Protective Headgear - forMotor Vehicular Users - Specifications Safety Glazing Materials Usedin Buildings - Safety Performance Specifications and Methods of Test R(1994) Electric Connectors - SealedInsulated Underground Connector Systems Rated 600 Volts R(1997)

Hazardous Industrial Chemicals- Precautionary Labeling Galvanized Steel Bolts andNuts for Overhead Line Construction Zinc-Coated Ferrous GroundRods for Overhead or Underground Line Construction Roadway Lighting Equipment -Enclosed Side-Mounted Luminaires for Horizontal-Burning High-IntensityDischarge Lamps IEEE C136-1994 Roadway Lighting Equipment -Fiber-Reinforced Plastic (FRP) Lighting Poles IEEE C136-1994 Roadway Lighting - VerticalTenons Used with Post-Top- Mounted Luminaires R(1997) Hand Tools - Nail Hammers -Safety Requirements Hand Tools - Heavy StrikingTools - Safety Requirements Hand Tools - Riveting, Scalingand Tinners' Setting Hammers - Safety Requirements Carbide Tips for Brazing onTurning Tools Supplement B212.1A 11/12/1990;ANSI/ISO 242:1975 R(1990) Refuse Collection, Processing,and Disposal Equipment - Mobile Refuse Collection and Compaction Equipment -Safety Requirements Partial Revision of ANSI Z245.1- 1984 (Withdrawn) PerformanceStandards and Policies for Structural-Use Panels *NOT CURRENT DOCUMENT Residential & Commercial Performance Rated Panels Performance Standards andPolicies for Structural-Use Panels Specification for Field WeldedTanks for Storage of Production Liquids R(2000) Specification for Casing andTubing (U.S. Customary Units) Sixth Edition; Effective Date April 15, 1999;Errata May 1999 Specification for Drill PipeFourth Edition Specification for Line PipeForty-Second Edition Specification for PipelineValves (Gate, Ball, and Check Valves) Twenty-First Edition; Supplement 2Effective June 1, 1998 Manual of PetroleumMeasurement Standards Chapter 19 - Evaporative Loss Measurement Section 1 -Evaporative Loss from Fixed-Roof Tanks Second Edition; Supersedes BULL Fire Test for Soft-SeatedQuarter-Turn Valves Fourth Edition R(1998) (Withdrawn) Guide for Controllingthe Lead Hazard Associated with Tank Entry and Cleaning *NOT CURRENT DOCUMENT Flanged Steel Pressure ReliefValves Seat Tightness of PressureRelief Valves Check Valves: Wafer,Wafer-Lug, and Double Flanged Type Fifth Edition Valve Inspection and TestingSeventh Edition; Errata August 22,1997 Metal Plug Valves - Flangedand Welding Ends Fourth Edition Steel Gate Valves - Flangedand Butt-Welding Ends, Bolted and Pressure Seal Bonnets Tenth Edition; ErrataJune 5, 1998 Butterfly Valves: DoubleFlanged, Lug- and Wafer-Type Fifth Edition Centrifugal Pumps forPetroleum, Heavy Duty Chemical, and Gas Industry Services Lubrication, Shaft-Sealing,and Control-Oil Systems and Auxiliaries for Petroleum, Chemical and GasIndustry Services Fourth Edition Centrifugal Compressors forPetroleum, Chemical, and Gas Service Industries Reciprocating Compressors for Petroleum,Chemical, and Gas Industry Services

Rotary Type PositiveDisplacement Compressors for Petroleum, Chemical, and Gas Industry ServicesThird Edition Welded Steel Tanks for OilStorage Tenth Edition; Addendum 1 March 2000 Packaged, Integrally GearedCentrifugal Air Compressors for Petroleum, Chemical, and Gas IndustryServices Bottom Loading and VaporRecovery for MC-306 Tank Motor Vehicles Seventh Edition (R 1995) Welding of Pipelines andRelated Facilities Nineteenth Edition Pressure Testing of LiquidPetroleum Pipelines Fourth Edition Aviation Fueling Hose FifthEditon Installation of UndergroundPetroleum Storage Systems Venting Atmospheric andLow-Pressure Storage Tanks Nonrefrigerated and Refrigerated Fifth Edition;Errata November 15, 1999 Protection Against IgnitionsArising out of Static, Lightning, and Stray Currents Sixth Edition Safe Entry and Cleaning ofPetroleum Storage Tanks Evaporation Loss fromLow-Pressure Tanks (R 1993) Documentation File for APIPublication 2517 - Evaporation Loss from External Floating-Roof Tanks Standard Method forMeasurement and Calibration of Horizontal Tanks ASTM D1410 R(1997) Method for Liquid Calibrationof Tanks ASTM D1406-65 R(1997) Central Station Air-HandlingUnits Unitary Air-Conditioning andAir-Source Heat Pump Equipment Sound Rating of OutdoorUnitary Equipment Standard for Packaged TerminalAir- Conditioners and Heat Pumps; (CSA C744-93) Water-Source Heat Pumps Sound Rating of Non-DuctedIndoor Air-Conditioning Equipment Commercial and IndustrialUnitary Air-Conditioning Condensing Units Sound Rating of Large OutdoorRefrigerating and Air- Conditioning Equipment Forced-Circulation Air-Coolingand Air-Heating Coils Unit Coolers for Refrigeration Room Fan-Coils Supersedes440-97 Water-Cooled RefrigerantCondensers, Remote Type Remote Mechanical-DraftAir-Cooled Refrigerant Condensers Refrigerant Liquid Receivers Positive DisplacementCondensing Units Water Chilling Packages Usingthe Vapor Compression Cycle Addeneum June : 1999 with White Paper; Supersedes550-92, and 590-92, and all Addendum Absorption Water Chilling andWater Heating Packages Method of Measuring MachinerySound Within an Equipment Space Central System Humidifiers forResidential Applications Liquid-Line Driers Thermostatic RefrigerantExpansion Valves Solenoid Valves for Use withVolatile Refrigerants

Automatic CommercialIce-Makers Commercial and Industrial AirFilter Equipment Air Terminals Supersedes ARIStandard 880-94 Method for Measuring theIntelligibility of Speech over Communication Systems ASA 85-1989 R(1999) (Withdrawn) Method forMeasurement of Real-Ear Protection of Hearing Protectors and PhysicalAttenuation of Ear Muffs ASA 1 R(1990) Specification for Sound LevelMeters Amendment S1.4A- 1985 ASA 47 R(1997) Preferred Frequencies, FrequencyLevels, and Band Numbers for Acoustical Measurements ASA 53 R(1997) Reference Quantities forAcoustical Levels ASA 84-1989 R(1997) Specification for Octave-Bandand Fractional-Octave- Band Analog and Digital Filters ASA 65-1986 R(1998) Measurement of Sound PressureLevels in Air ASA 118 1995 R(1999) Specification for AcousticalCalibrators ASA 40-1984 R(1997) Maximum Permissible AmbientNoise Levels for Audiometric Test Rooms ASA 99 Mechanical Coupler forMeasurement of Bone Vibrators ASA 74-1987 R(1997) Methods for Measuring theReal-Ear Attenuation of Hearing Protectors Engineering Methods for theDetermination of Sound Power Levels of Noise Sources in a SpecialReverberation Test Room ASA 91 R(1997) Safety Code for MechanicalRefrigeration Addendum 15b:02-2001; 15c-2000; 15d-2000; Errata 12/05/1994;Interpretation IC 15-1994-11: 10/20/2000 Method of Testing for RatingRoom Air Conditioners and Packaged Terminal Air Conditioners R(1999) Method of Testing Capacity ofThermostatic Refrigerant Expansion Valves Method of Testing for RatingRemote Mechanical-Draft Air-Cooled Refrigerant Condensers Methods of Testing for RatingPositive Displacement Refrigerant Compressors and Condensing Units Methods of Testing ForcedConvection and Natural Convection Air Coolers for Refrigeration Methods of Testing AutomaticIce Makers R(1999) Methods of Testing ForcedCirculation Air Cooling and Air Heating Coils Methods of Testing for RatingUnitary Air-Conditioning and Heat Pump Equipment Laboratory Methods of TestingFans for Rating AMCA Standard 210-85; Interpretation IC 51-1999-02 Gravimetric and Dust-SpotProcedures for Testing Air- Cleaning Devices Used in General Ventilation forRemoving Particulate Matter Laboratory Method of TestingIn-Duct Sound Power Measurement Procedure for Fans AMCA 330-86 Energy Conservation in NewBuilding Design This Publication Includes the Following Sections: (1)ANSI/ASHRAE/IES 90A-1980, (2) ASHRAE/IES 90B-1975, (3) ASHRAE 90C-197 Methods of Testing for RatingSeasonal Efficiency of Unitary Air Conditioners and Heat Pumps BPVC SECTION I Rules forConstruction of Power Boilers Non-Interfiled (Boiler and Pressure VesselCodes) BPVC SECTION I 1999 Addenda,Rules for Construction of Power Boilers Non-Interfiled Codes, Standards, andSpecifications Referenced in Text

Data Report Forms and Guides

Index Introduction

Appendix I - MandatoryPreparation of Technical Inquiries to the Boiler and Pressure VesselCommittee Interfiled Appendix A Explanation of theCode Containing Matter Not Mandatory Unless Specifically Referred to in theRules of the Code Part PB Requirements forBoilers Fabricated by Brazing Interfiled Part PEB Requirements forElectric Boilers Part PFH Optional Requirementsfor Feedwater Heater (When Located within Scope of Section I Rules)Interfiled Part PFT Requirements forFiretube Boilers Part PG General Requirementsfor All Methods of Construction Part PMB Requirements forMiniature Boilers Part PR Requirements forBoilers Fabricated by Riveting Interfiled Part PVG Requirements forOrganic Fluid Vaporizers Interfiled Part PW Requirements forBoilers Fabricated by Welding Part PWT Requirements forWatertube Boilers SI Units Interfiled BPVC SECTION IV Rules forConstruction of Heating Boilers Non-Interfiled (Boiler and Pressure VesselCodes) BPVC SECTION IV 1999 Addenda,Rules for Construction of Heating Boilers Non-Interfiled (Boiler and PressureVessel Codes) Index INTRODUCTION

Appendix A Approval of NewMaterials Under the ASME Boiler and Pressure Vessel Code Appendix B Method of CheckingSafety Valve and Safety Relief Valve Capacity by Measuring Maximum Amount ofFuel That Can Be Burned Appendix C Examples of Methodof Calculating a Welded Ring Reinforced Furnace Appendix D Examples of Methodsof Computation of Openings in Boiler Shells Appendix E Terminology Appendix F Quality ControlSystem Appendix H List ofAbbreviations and Addresses Appendix I Specification forTest Method for Water Absorption of Plastics ASTM D 570-81 Reapproved 1988 Appendix K Guide toInformation Appearing on Certificate of Authorization Appendix L Guide toManufacturer's Data Report Forms Introduction

SI Units Unified Inch Screw Threads (UNand UNR Thread Form) Gages and Gaging for UnifiedInch Screw Threads Errata May 1992 R(1991) Screw Thread Gaging Systemsfor Dimensional Acceptability - Inch and Metric Screw Threads (UN, UNR, UNJ,M, and MJ) Errata - 1994 Acme Screw Threads Nomenclature, Definitions, andLetter Symbols for Screw Threads Revision of ANSI B1.7-1977 R(1992) Stub Acme Screw ThreadsR(1994) Buttress Inch Screw Threads 7Degrees/45 Degrees Form with 0.6 Pitch Basic Height of Thread EngagementR(1992) Class 5 Interference-FitThread R(1998) Metric Screw Threads - MProfile Gages and Gaging for Metric MScrew Threads Revision of ANSI B1.16-1972 R(1992) Pipe Threads, General Purpose(Inch) Revision and Redesignation of ASME/ANSI B2.1-1968 R(1992) Dryseal Pipe Threads (Inch)Revision and Redesignation of B2.2-1968 R(1998) Gaging for Dryseal PipeThreads (Inch) R(1998) Hose Coupling Screw Threads(Inch) R(1998)

Metric Screw Threads: MJProfile Gages and Gaging for MJ SeriesMetric Screw Threads Revision of ANSI B1.22-1978 R(1992) Controls and Safety Devicesfor Automatically Fired Boilers Interpretations to CSD-1-1998Controls and Safety Devices for Automatically Fired Boilers

Addenda to CSD-1-1998 Controlsand Safety Devices for Automatically Fired Boilers Errata - May 2000 Pallets, Slip Sheets, andOther Bases for Unit Loads Supersedes MH1.1.2, MH1.4.1M, MH1.6, and MH1.7M Pallet Sizes Revision of ANSIMH1.2.2-1975 Wood Pallets Addenda to MH1 - 1997 Pallets,Slip Sheets, and Other Bases for Unit Loads Standard for the Qualificationof Elevator Inspectors R(2000) Appendix 1 - MandatoryPreparation of Technical Inquiries to the Boiler and Pressure VesselCommittee Article 1 General Article 1 General Article 1 Scope and ServiceRestrictions Article 1 General Interpretations Volume 42

BPVC SECTION VIII Rules forConstruction of Pressure Vessels DIVISION 1 Non-Interfiled (Boiler andPressure Vessel Codes) Addenda to B18.13-1996 Screwand Washer Assemblies - Sems (Inch Series) Performance Standard for HandChain Manually Operated Chain Hoists Appendix 2 - Mandatory Codes,Standards, and Specifications Referenced in Text Article 2 MaterialRequirements Article 2 MaterialRequirements

Article 2 MaterialRequirements Article 2 MaterialRequirements (Withdrawn) Safety and ReliefValves (Performance Test Codes) Appendix 3 - MandatoryAdhesive Attachment of Nameplates to Casing Article 3 Design Article 3 Design Stresses andMinimum Thicknesses Article 3 Design Article 3 Design Preferred Limits and Fits forCylindrical Parts R(1999) Performance Standard forOverhead Electric Wire Rope Hoists Fire Steam Generators Revisionof ASME PTC 4.1- 1964(R1991) (Performance Test Codes) Appendix 4 - MandatoryAlternative Specification for Plates and Bars in Lieu of SA-36 for FlatPlates and Bars Article 4 Tests Article 4 General Requirements

Article 4 Pressure RelievingDevices Article 4 Design of Weldments Interpretations to B56.1-1993Safety Standard for Low Lift and High Lift Trucks

T-Slots, Their Bolts, Nuts,and Tongues Revision of ANSI B5.1-1975; Should Be Used Instead of ANSI B5.1.Which Was Cancelled in 1985 R(1998) Chucks and Chuck Jaws R(1994) Spindle Noses for Tool RoomLathes, Engine Lathes, Turret Lathes, and Automatic Lathes R(1998) Machine Tapers Accuracy of Engine and ToolRoom Lathes One of a Series of Standards for Small Tools and Machine ToolElements R(1992) Spindle Noses and Tool Shanksfor Milling Machines R(1998) Machine MountingSpecifications for Abrasive Discs and Plate Mounted Wheels Errata - October1985 R(1994) Spindle Noses and Tool Shanksfor Horizontal Boring Machines R(1991)

Milling Machines R(1998) Cutter and Tool GrindingMachines R(1994) Methods for PerformanceEvaluation of Computer Numerically Controlled Machining Centers Errata 1993R(1998) Performance Standard for AirChain Hoists Appendix 5 - Mandatory VacuumBoilers Article 5 Quality Control andInspection Article 5 MaterialRequirements

Article 5 Tests, Inspection,and Stamping Article 5 Tests Performance Standard for AirWire Rope Hoists Article 6 Welding Processesand Qualifications

Article 6 Instruments,Fittings, and Controls Article 6 Inspection andStamping Article 7 Design of Weldments

Article 7 InstallationRequirements Article 7 Controls Article 8 FabricationRequirements

Article 8 InstallationRequirements Displacement Compressors,Vacuum Pumps and Blowers Erratum - 1972 (Performance Test Codes) R(1997) Article 9 Inspection

Performance Test Code onCompressors and Exhausters (Performance Test Codes)

Article 10 GeneralRequirements

Letter Symbols andAbbreviations for Quantities Used in Acoustics Revision of ASA Y10.11-53 Stainless Steel PlumbingFixtures (Designed for Residential Use) Article 11 MaterialRequirements

Article 12 Brazing Processes,Procedures, and Qualifications

Scheme for the Identificationof Piping Systems Erratum - September 1998 Article 13 Design

Article 14 FabricationRequirements

Decimal Inch Drawing SheetSize and Format Metric Drawing Sheet Size andFormat Line Conventions and LetteringR(1998) Multiview and Sectional ViewDrawings Revision of ANSI Y14.3 - 1975 R(1999) Pictorial Drawing R(1999) Mathematical Definition ofDimensioning and Tolerancing Principles R(1999) Dimensioning and TolerancingR(1999) Screw Thread RepresentationR(1998) Gear Drawing Standards - Part1 for Spur, Helical, Double Helical and Rack Partial Revision of Y14.758R(1998) Gear and Spline DrawingStandards Part 2 - Bevel and Hypoid Gears R(1999) Castings and Forgings Mechanical SpringRepresentation R(1998) Types and Applications ofEngineering Drawings Revision of ASME Y14.24M-1989 Chassis Frames - Passenger Carand Light Truck - Ground Vechicle Practices R(1999)

Associated Lists Revision of EngineeringDrawings and Associated Documents Surface Texture Symbols Abbreviations and AcronymsRevision and Redesignation of ASME Y1.1-1989 Engineering Drawing Practices Safety Standard for MechanicalPower Transmission Apparatus Article 15 Inspection andStamping

Cast Iron Pipe Flanges andFlanged Fittings Classes 25, 125, and 250 Malleable Iron ThreadedFittings Classes 150 and 300 Gray Iron Threaded Fittings -Classes 125 and 250 Interpretations to B16.4-1998- Gray Iron Threaded Fittings - Classes 125 and 250

Pipe Flanges and FlangedFittings NPS 1/2 Through NPS 24 Interpretations to B16.5-1996Pipe Flanges and Flanged Fittings Includes Interpretation No. 3

Addenda to B16.5-1996 PipeFlanges and Flanged Fittings NPS 1/2 Through NPS 24 Factory-Made Wrought SteelButtwelding Fittings Interpretations to B16.9-1993Factory-Made Wrought Steel Buttwelding Fittings Includes Interpretation No. 1

Face-to-Face and End-to-EndDimensions of Valves Forged Fittings,Socket-Welding and Threaded Cast Iron Threaded DrainageFittings Ferrous Pipe Plugs, Bushings,and Locknuts with Pipe Threads Cast Bronze Threaded FittingsClasses 125 and 250 R(1994) Interpretations to B16.5-1985Cast Bronze Threaded Fittings Classes 125 and 250 Includes InterpretationsNo. 1

Cast Copper Alloy Solder JointPressure Fittings R(1994) Metallic Gaskets for PipeFlanges Ring-Joint, Spiral- Wound, and Jacketed Addenda to B16.20-1998Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed Nonmetallic Flat Gaskets forPipe Flanges Revision of ANSI B16.21-1978 Wrought Copper and CopperAlloy Solder Joint Pressure Fittings Addenda to B16.22-1995 WroughtCopper and Copper Alloy Solder Joint Pressure Fittings

Cast Copper Alloy Solder JointDrainage Fittings - DWV Errata - January 1994 Cast Copper Alloy Pipe Flangesand Flanged Fittings Class 150, 300, 400, 600, 900, 1500, and 2500 Errata -1991 R(1998) Buttwelding Ends Interpretations to B16.25-1997Buttwelding Ends Includes Interpretation No. 1

Cast Copper Alloy Fittings forFlared Copper Tubes Wrought Copper and WroughtCopper Alloy Solder Joint Drainage Fittings - DWV Manually Operated Metallic GasValves for Use in Gas Piping Systems up to 125 psig (Sizes 1/2 Through 2) Valves - Flanged, Threaded,and Welding End Interpretations to B16.34-1996Valves - Flanged, Threaded, and Welding End Includes Interpretation No. 2

Addenda to B16.34-1996 Valves- Flanged, Threaded, and Welding End Orifice Flanges Interpretations to B16.36-1996Orifice Flanges

Large Metallic Valves for GasDistribution (Manually Operated, NPS 2 1/2 to 12, 125 psig Maximum) R(1994) Malleable Iron Threaded PipeUnions Classes 150, 250, and 300 Manually OperatedThermoplastic Gas Shutoffs and Valves in Gas Distribution Systems R(1994) Safety Code for Elevators andEscalators Keys and Keyseats R(1998) Woodruff Keys and KeyseatsRevision of USAS B17F-1930 R(1998) Small Solid Rivets 7/16 InchNominal Diameter and Smaller Revision of B18.1-1965 R(1995) Large Rivets 1/2 Inch NominalDiameter and Larger Revision of B18.4-1960 R(1995) Metric Small Solid Rivets 12mm Nominal Diameter and Smaller Errata - October 1985 R(1995) Square and Hex Bolts andScrews (Inch Series) Addenda to ASME B18.2.1-1996Square and Hex Bolts and Screws (Inch Series) Square and Hex Nuts (InchSeries) R(1999) Metric Hex Cap Screws Metric Formed Hex ScrewsErrata - December 1980 R(1995) Metric Heavy Hex Screws Errata- April 1981 R(1995) Metric Hex Flange ScrewsR(1995)

Metric Hex Bolts Errata - May1981 R(1995) Metric Heavy Hex Bolts Errata- April 1981 R(1995) Metric Heavy Hex StructuralBolts Errata - April 1981 R(1995) Metric Hex Lag Screws R(1999) Metric Heavy Hex Flange ScrewsR(1995) Metric Hex Nuts, Style 2Errata - January 1982 R(1995) Metric Slotted Hex Nuts Errata- May 1981 R(1995) Metric Hex Flange Nuts R(1999) Metric Hex Jam Nuts Errata -May 1981 R(1998) Metric Heavy Hex Nuts Errata -April 1981 R(1998) Socket Cap, Shoulder, and SetScrews, Hex and Spline Keys (Inch Series) Socket Head Cap Screws (MetricSeries) R(1993) Metric Series Hexagon Keys andBits R(1998) Hexagon Socket Head ShoulderScrews (Metric Series) R(1993) Hexagon Socket Button Head CapScrews (Metric Series) R(1993) Hexagon Socket FlatCountersunk Head Cap Screws (Metric Series) R(1993) Metric Series Socket SetScrews R(1993) Round Head Bolts (Inch Series)R(1998) Metric Round Head Short SquareNeck Bolts Metric Round Head Square NeckBolts R(2000) Wood Screws (Inch Series)R(1997) Slotted Head Cap Screws,Square Head Set Screws, and Slotted Headless Set Screws (Inch Series) Machine Screws and MachineScrew Nuts Thread Forming and ThreadCutting Tapping Screws and Metallic Drive Screws (Inch Series) Metric Thread-Forming andThread-Cutting Tapping Screws 2000 Edition; Revision of ANSI/ASME B18.6.5M-1986(R1993)

Metric Machine Screws 2000Edition; Revision of ASME B18.6.7M-1985(1993) General Purpose Semi-TubularRivets, Full Tubular Rivets, Split Rivets and Rivet Caps R(1992) Metric General PurposeSemi-Tubular Rivets R(2000) Clevis Pins and Cotter Pins(Inch Series) Errata - April 1995 R(2000) Plow Bolts (Inch Series) Track Bolts and Nuts R(2000) Miniature Screws R(1992) Glossary of Terms forMechanical Fasteners R(1991) Screw and Washer Assemblies -Sems (Inch Series) Screw and Washer Assemblies -Sems (Metric Series) Forged Eyebolts R(1995) Mechanical and PerformanceRequirements for Prevailing- Torque Type Steel Metric Hex Nuts and Hex FlangeNuts Errata - December 1980 R(1995) Torque-Tension TestRequirements for Prevailing-Torque Type Steel Metric Hex Nuts and Hex FlangeNuts R(1995) Dimensional Requirements forPrevailing-Torque Type Steel Metric Hex Nuts and Hex Flange Nuts Inspection and QualityAssurance for General Purpose Fasteners R(1999) Inspection and QualityAssurance for High-Volume Machine Assembly Fasteners R(1999) Supplement of ASMEB18.18.2m-1987 Inspection and Quality Assurance for High-Volume MachineAssembly Fasteners

Inspection and Quality Assurancefor Special Purpose Fasteners R(1999) Inspection and QualityAssurance for Fasteners for Highly Specialized Engineered ApplicationsR(1999) Lock Washers (Inch Series) Lock Washers (Metric Series) Plain Washers Reaffirmationand Redesignation of ASA B27.2-1965 R(1998) Metric Plain Washers R(2000) Part Identifying Number (PIN)Code System Standard for B18 Externally Threaded Products Part Identifying Number (PIN)Code System Standard for B18 Internally Threaded Products

Part Identifying Number (PIN)Code System Standard for B18 Nonthreaded Products Application Part II of FluidMeters (Performance Test Codes) Steam and Water Sampling,Conditioning, and Analysis in the Power Cycle (Performance Test Codes) Atmospheric Water CoolingEquipment (Performance Test Codes) R(1997) Speed-Governing Systems forInternal Combustion Engine- Generator Units (Performance Test Codes) General Purpose Uniform CrossSection Spiral Retaining Rings R(1999) General Purpose Tapered andReduced Cross Section Retaining Rings R(1999) General Purpose Metric Taperedand Reduced Cross Section Retaining Rings Type 3DM1 - Heavy Duty ExternalRings Type 3EM1 - Reinforced "E" Rings Type 3FM1 - "C"Type R Precision Power TransmissionRoller Chains, Attachments, and Sprockets R(1999) "H" Type MillChains, Attachments, and Sprocket Teeth 700 Class Welded Steel andCast Chains, Attachments and Sprockets for Water and Sewage Treatment Plants Slings Safety Standard forCableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings FSC 3940;Should Be Used Instead of MIL-S-52432A Hooks Interpretations to B30.10-1993Hooks

Monorails and Underhung Cranes Addenda to B30.11 - 1998Monorails and Underhung Cranes Overhead Hoists (Underhung) Interpretations to B30.16-1998Overhead Hoists (Underhung)

Cases No. 25 to B31.1 PowerPiping

Cases No. 26 to B31.1 PowerPiping

Power Piping Interpretations to B31.1-1998Power Piping Includes Interpretation No. 31

Addenda to B31.1-1998 PowerPiping Addenda to B31.1-1998 EditionPower Piping Process Piping

Addenda to Process Piping Pipeline TransportationSystems for Liquid Hydrocarbons and other Liquids Refrigeration Piping Errata -1993 Gas Transmission andDistribution Piping Systems Building Services Piping Interpretations to B31.9-1996Building Services Piping Includes Interpretation No. 1

Preferred Metric Sizes forFlat Metal Products R(1994) Preferred Metric Sizes forRound, Square, Rectangle and Hexagon Metal Products Revision of ANSIB32.41977 R(1994) Preferred Metric Sizes forTubular Metal Products Other Than Pipe Errata - 1996 R(1994) Preferred Metric Equivalentsof Inch Sizes for Tubular Metal Products Other Than Pipe Revision of ANSIB32.6 - 1977 R(1994) Graphic Symbols for PlumbingFixtures for Diagrams Used in Architecture and Building Construction Revisionof ANSI Y32.4-54 R(1999) Graphic Symbols for FluidPower Diagrams R(1999) Welded and Seamless WroughtSteel Pipe Interpretations Volume 42 Interpretations Volume 42 Interpretations Volume 43 Interpretations Volume 43 Interpretations Volume 44 Interpretations Volume 44 Surface Texture (SurfaceRoughness, Waviness, and Lay) Gage Blanks Revision ofANSI/ASME B47.1AM-1982 R(1999) Safety Standard for Low Liftand High Lift Trucks Load Handling Symbols forPowered Industrial Trucks Special Notice - October 1993 R(2000) Hook-Type Forks and ForkCarriers for Powered Industrial Forklift Trucks Special Notice - February1993 R(2000) Specification for HorizontalEnd Suction Centrifugal Pumps for Chemical Process Errata - August 1992R(1999) Measurement ofOut-Of-Roundness R(1997) Reamers Knurling R(1995)

Milling Cutters and End Mills Specifications for Band SawBlades (Metal Cutting) Specifications for Hole Saws,Hole Saw Arbors, and Hole Saw Accessories 1998 Addenda Summary ofChanges Addenda 1998 Summary ofChanges 1999 Addenda Summary ofChanges Addenda 1999 Summary ofChanges Socket Wrenches, Hand (InchSeries) Socket Wrenches, Extensions,Adaptors, and Universal Joints, Power Drive (Impact) (Inch Series) Driving and Spindle Ends forPortable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded) Socket Wrenches, Hand (MetricSeries) Wrenches, Box, Angled, OpenEnd, Combination, Flare Nut, and Tappet (Inch Series) Adjustable Wrenches Handles and Attachments forHand Socket Wrenches - Inch and Metric Series Pliers, Diagonal Cutting, andNippers, End Cutting Hand Torque Tools Flat Tip and PhillipsScrewdrivers Shears (Metal Cutting, Hand) Gages, Wrench Openings,Reference Pliers, Retaining Ring R(1998) Pliers (Lineman's, IronWorker's, Gas, Glass, Fence, and Battery) Wrench, Crowfoot Attachments(Inch Series) Pliers, Multiple Position,Adjustable Floor-Affixed Supports forOff-the-Floor Plumbing Fixtures for Public Use

Backwater Valves R(1998) Plumbing Fixture Fittings Enameled Cast Iron PlumbingFixtures Errata - November 1996; Supplement 2 - June 2000 R(1999) Vitreous China PlumbingFixtures Supplement 1 - June 2000 Porcelain Enameled FormedSteel Plumbing Fixtures Errata - November 1996; Supplement 1 1998;Supplement 2 - June 2000 R(1999) Trim for Water-Closet Bowls,Tanks, and Urinals Floor Drains R(1998) Roof Drains Revision of ANSIA112.21.2-1971 Cleanouts R(1998) Sampling Procedures and Tablesfor Inspection by Attributes Quality Management and QualityAssurance - Vocabulary ISO 8402:1994; ASQ A8402-1994 is a Revision andRedesignation of ASQ A3-1987 Quality Management and QualityAssurance Standards - Guidelines for Selection and Use Supersedes Q901987 Quality Management Systems -Requirements Quality Systems - Model forQuality Assurance in Production, Installation, and Servicing Supersedes Q92-1987 Quality Systems - Model forQuality Assurance in Final Inspection and Test Supersedes Q93-1987 Quality Management and QualitySystem Elements - Guidelines; Supersedes Q94-1987 Safety Requirements for FixedLadders Safety Requirements forPersonal Fall Arrest Systems Performance Requirements forPipe Applied Atmospheric Type Vacuum Breakers Performance Requirements forWater Pressure Reducing Valves; Errata 12/20/93 Performance Requirements forCommercial Food Waste Grinder Units Performance Requirements forWater Hammer Arresters Performance Requirements forVacuum Breaker Wall Hydrants, Freeze Resistant, Automatic Draining Type Performance Requirements forPressure Vacuum Breaker Assembly (Recommended for Outdoor Usage) Performance Requirements forPressurized Flushing Devices (Flushometers) for Plumbing Fixtures Standard Specification forHard-Drawn Copper Wire Standard Specification forASTM Thermometers E1 Standard Specification forSteel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated) Standard Specification forSoft or Annealed Copper Wire Standard Practices for ForceVerification of Testing Machines AASHTO No: T67

Standard Specification forCarbon Steel Tee Rails Standard Test Method forBrinell Hardness of Metallic Materials AASHTO No. T70-86 Standard Specification forWire Cloth and Sieves for Testing Purposes Standard Specification forCarbon Steel Girder Rails of Plain, Grooved, and Guard Types R(1997) Standard Specification forMedium-Hard-Drawn Copper Wire Standard Test Methods forNotched Bar Impact Testing of Metallic Materials Standard Test Method forPyrometric Cone Equivalent (PCE) of Fireclay and High Alumina RefractoryMaterials Standard Specification forAluminum-Alloy Sand Castings (Withdrawn) Standard TestMethods for Chemical Analysis of Steel, Cast Iron, Open-Hearth Iron, andWrought Iron Standard Practice forPreparation of Metallographic Specimens Standard Practice for Makingand Using C-Ring Stress- Corrosion Test Specimens Standard Specification forClay Drain Tile and Perforated Clay Drain Tile Standard Test Method forBitumen Content R(1998) Standard Specification forHeat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and ForgedCarbon Steel Compromise Joint Bars Standard Specification forPipe, Steel, Black and Hot- Dipped, Zinc-Coated, Welded and Seamless Standard Test Method for FlashPoint by Tag Closed Tester Standard Specification forBuilding Brick (Solid Masonry Units Made from Clay or Shale) Standard Specification forHigh Conductivity Tough- Pitch Copper Refinery Shapes Standard Specification forQuicklime for Structural Purposes R(1997) Standard Test Method forPenetration of Bituminous Materials Standard Specification forSteel Screw Spikes Standard Specification forGeneral Requirements for Rolled Structural Steel Bars, Plates, Shapes, andSheet Piling Standard Specification forZinc AASHTO No.: M120-77 Standard Test Method for Losson Heating of Oil and Asphaltic Compounds E1; AASHTO No.: T 47 R(2000) Standard Terminology Relatingto Methods of Mechanical Testing E1-2000 Standard Test Method forFlexural Strength of Concrete (Using Simple Beam with Third-Point Loading) Standard Terminology Relatingto Metallography Standard Practice forAtmospheric Environmental Exposure Testing of Nonmetallic Materials Standard Specification forConcentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft Standard Test Methods forTension Testing of Metallic Materials AASHTO No.: T68 Standard Test Methods forTension Testing of Metallic Materials (Metric) Standard Specification forUnalloyed Magnesium Ingot and Stick for Remelting Standard Test Methods ofCompression Testing of Metallic Materials at Room Temperature R(2000)

(Withdrawn) Standard TestMethods for Directional Reflectance Factor, 45-Deg 0-Deg, of Opaque Specimensby Broad-Band Filter Feflectometry *NOT CURRENT DOCUMENT R(198 Standard for Use of theInternational System of Units (SI): the Modern Metric System Revision andRedesignation of ANSI/IEEE Std 268-1992 and ASTM E380 Standard Specification forHard-Drawn Copper Alloy Wires for Electric Conductors Standard Specification forCopper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock (Metric)E12000 Standard Practice forCalculating Sample Size to Estimate, with a Specified Tolerable Error, theAverage for a Characteristic of a Lot or Process Standard Specification forDistillation Equipment E1- 2000 R(2000) Standard Specification forElectric-Resistance-Welded Steel Pipe Standard Hardness ConversionTables for Metals Relationship Among Brinell Hardness, Vickers Hardness, RockwellHardness, Superficial Hardness, Knoop Hardness, and Scl Standard Test Methods ofTesting Small Clear Specimens of Timber E1-2000 R(2000) Standard Test Methods forFluid Resistance of Gasket Materials Standard Specification forSteel Castings, High Strength, for Structural Purposes Standard Specification forCopper Sheet, Strip, Plate, and Rolled Bar Standard Specification forRope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, forElectrical Conductors Standard Specification forRope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, forElectrical Conductors Standard Specification forCellulosic Fiber Insulating Board R(2001) Standard Specification forFacing Brick (Solid Masonry Units Made from Clay or Shale) Standard Practice forInstalling Vitrified Clay Pipe Lines Standard Specification for RawTung Oil R(1998) Standard Specification forConcentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR) Standard Specification forPiping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and HighTemperature Service Standard Specification for Heat-ResistingChromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip forPressure Vessels Standard Practice forEstablishing Structural Grades and Related Allowable Properties for VisuallyGraded Lumber E1-2001 Standard Specification forSeamless and Welded Austenitic Stainless Steel Tubing for General Service Standard Specification forSeamless and Welded Austenitic Stainless Steel Sanitary Tubing (Withdrawn) StandardDefinitions of Terms Relating to Liquid Penetrant Inspection Standard Specification forPressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile StrengthR(2001) Standard Specification forSpirits of Turpentine Standard Specification forConcrete Sewer, Storm Drain, and Culvert Pipe Standard Specification forConcrete Sewer, Storm Drain, and Culvert Pipe (Metric)

Standard Practice forEvaluating Performance Characteristics of Ultrasonic Pulse-Echo Examination Instrumentsand Systems without the Use of Electronic Measurement In Standard Test Method forEmbossed Depth of Resilient Floor Coverings Standard Method of MacroetchTesting Steel Bars, Billets, Blooms, and Forgings Standard Terminology Relatingto Corrosion and Corrosion Testing Standard Specification forCreosote-Coal Tar Solution E1-2000 R(2000) Standard Test Methods forRubber Property-Adhesion to Rigid Substrates Standard Test Method forKinematic Viscosity of Transparent and Opaque Liquids (the Calculation ofDynamic Viscosity) IP Designation: 71/1/97; British Standard 2000: Standard Specification forFree-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines ReplacesASTM B16M Standard Terminology forPaint, Related Coatings, Materials, and Applications Standard Specification forStainless Steel Forgings Standard Specification forCold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds andShapes Standard Specification forHot-Formed Welded and Seamless Carbon Steel Structural Tubing Standard Specification forPressure Vessel Plates, Carbon Steel, for Moderate- and Lower-TemperatureService R(2001) Standard Test Method forSulfate Ion in Water E1-1995 R(1995) Standard Test Method forDiagonal Tension (Shear) in Masonry Assemblages E1-2001 Standard Specification forCalcium Silicate Block and Pipe Thermal Insulation R(2001) Standard Specification andTest Methods for Metallic Medical Bone Screws Standard Test Methods forRockwell Hardness and Rockwell Superficial Hardness of Metallic Materials Standard Test Method forConsistency of Paints Measuring Kregs Unit (KU) Viscosity Using a Stormer-Type Viscometer Standard Test Methods forCompressive Strength of Chemical-Resistant Mortars, Grouts, MonolithicSurfacings, and Polymer Concretes Standard Specification forCartridge Brass Sheet, Strip, Plate, Bar, and Disks (Blanks) Standard Specification forIron Bronze Sintered Bearings (Oil-Impregnated) Standard Specification forDeformed and Plain Billet- Steel Bars for Concrete Reinforcement AASHTO No.:M 31 Standard Specification forHot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing Standard Specification forAluminum-Alloy Investment Castings (Withdrawn) Standard Practicefor Design of Molds for Test Specimens of Plastic Molding Materials *NOTCURRENT DOCUMENT Standard Specification forHollow Brick (Hollow Masonry Units Made from Clay or Shale) Standard Test Method for AcidNumber of Petroleum Products by Potentiometric Titration British Standard4457; IP Designation: 177/96; E1-2001 R(2001) (Withdrawn) StandardSpecification for Cast Methacrylate Plastic Sheets, Rods, Tubes and Shapes*NOT CURRENT DOCUMENT Standard Specification forGeneral Requirements for Steel Plates for Pressure Vessels

Standard Test Methods forApparent Porosity, Water Absorption, Apparent Specific Gravity, and BulkDensity of Burned Refractory Brick and Shapes by Boiling Water Standard Test Method forDistillation of Road Tars (Withdrawn) Standard Practicefor Installation of Storm Windows, Replacement Windows, Multi-Glazing, StormDoors, and Replacement Doors Standard Test Method forRubber Deterioration in Carbon - Arc Weathering Apparatus Standard Specification forEpoxy-Coated Steel Reinforcing Bars

Standard Specification forNaval Brass Rod, Bar, and Shapes Standard Specification forNaval Brass Rod, Bar, and Shapes (Metric) Standard Test Methods forElevated Temperature Tension Tests of Metallic Materials R(1998) (Withdrawn) Standard TestMethods for Rubber Property - Young's Modulus at Normal and SubnormalTemperatures *NOT CURRENT DOCUMENT R(1989) Standard Practice forDetermining Resistance of Synthetic Polymeric Materials to Fungi Standard Practice for SteelCastings, Surface Acceptance Standards, Visual Examination R(2001) Standard Test Methods forRubber Cements E1-1993 R(1993) Standard Specification forApplication and Finishing of Gypsum Board Standard Practice for Use ofthe Tex System to Designate Linear Density of Fibers, Yarn Intermediates, andYarns Standard Practice forPreparing Refractory Concrete Specimens by Casting Standard Practice for AdhesiveBonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels Standard Specification forElastomeric Joint Sealants Standard Specification forBronze Castings for Bridges and Turntables Standard Practice forDetermining Resistance of Plastics to Bacteria R(1996) Standard Specification forFilter Units, Air Conditioning: Viscous-Impingement and Dry Types,Replaceable R(2001) Standard Test Methods forEstimating the Depth of Decarburization of Steel Specimens Standard Test Method forDetermining FF Floor Flatness and FL Floor Levelness Numbers R(2001) Standard Specification forPolyethylene Plastics Extrusion Materials for Wire and Cable Standard Specification forWhite Metal Bearing Alloys (Known Commercially as "Babbitt Metal") Standard Test Methods forRelative Permittivity (Dielectric Constant) and Dissipation Factor by FluidDisplacement Procedures (Withdrawn) StandardSpecification For Extruded Acrylic Plastic Sheet *NOT CURRENT DOCUMENT Standard Test Methods forChemical Analysis of Limestone, Quicklime, and Hydrated Lime Standard Test Method forHydrogen Ion Concentration of Dry Adhesive Films Standard Specification forRound Timber Piles Standard Practice forConditioning Leather and Leather Products for Testing Standard Test Method forMeasurement of Computed Tomography (CT) System Performance R(2001) Standard Test Method forDetermining Corrosion Preventive Properties of Lubricating Greases

(Withdrawn) Standard TestMethod for Determination of Water in Liquid Petroleum Products by KarlFischer Reagent Standard Test Methods forMechanical Fasteners in Wood R(2000) Standard Test Methods forPhenolic Compounds in Water Standard Test Method for PeelResistance of Adhesives (T-Peel Test) Specification for Engineeringand Design Criteria for Rigid Wall Relocatable Structures Standard Specification forSteel Castings, Carbon, for General Application R(2000) Standard Classification ofFireclay and High-Alumina Refractory Brick Standard Specification forGypsum Plasters Standard Test Methods forSoftening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus Standard Test Methods ofDetecting Susceptibility to Intergranular Corrosion in Wrought, NickelRich,Chromium-Bearing Alloys Standard Classification Systemfor Rubber Products in Automotive Applications E1-2001; SAE J200 Standard Test Method forDiameter of Wool and Other Animal Fibers by Microprojection R(2001) Standard Specification forSteel Bars, Carbon and Alloy, Hot-Wrought and Cold-Finished, GeneralRequirements for E1-2000 Standard Specification forRefined Lead R(1997) Standard Test Method for BulkDensity ("Unit Weight") and Voids in Aggregate AASHTO No.: T19/T19M Standard Test Methods forSampling and Testing Lac Resins Standard Practice for UsingSignificant Digits in Test Data to Determine Conformance with SpecificationsR(1999) Standard Practice forDetermining Algal Resistance of Plastic Films (Withdrawn) StandardSpecification for Fiberboard Nail- Base Sheathing *NOT CURRENT DOCUMENT Standard Specification forCopper Alloys in Ingot Form (Withdrawn) StandardSpecification for Perforated, Laminated-Wall Bituminized Fiber Pipe forGeneral Drainage *NOT CURRENT DOCUMENT (Withdrawn) Forced-ConvectionLaboratory Ovens for Electrical Insulation, Spec, for *NOT CURRENT DOCUMENT Standard Test Methods forElectrical Conductivity of Aviation and Distillate Fuels IP Designation:274/99; E12001 (Withdrawn) StandardSpecification for Poly(Vinyl Chloride) (PVC) Plastic Tubing *NOT CURRENTDOCUMENT (Withdrawn) Standard Methodsfor Chemical Analysis of Tribasic Lead Phosphosilicate *NOT CURRENT DOCUMENT Standard Practice for Makingand Curing Concrete Test Specimens in the Field (Withdrawn) Standard Practicefor Rubber Seals - Compatibility with Service Fluids *NOT CURRENT DOCUMENT Standard Specification forSolder Metal

Standard Specification forSewer and Manhole Brick (Made from Clay or Shale) AASHTO No.: M91-78; E11999R(1999) Standard Specification forTinned Soft or Annealed Copper Wire for Electrical Purposes Standard Specification forConcrete Aggregates (Withdrawn) StandardSpecification for Fabric- Reinforced, Vulcanized Rubber Sheeting for Pond,Canal, and Reservoir Lining *NOT CURRENT DOCUMENT Standard Specification forStructural Clay Load- Bearing Wall Tile Standard Guide for ChemicalAnalysis of White Pigments R(1999) Standard Test Methods forChemical Analysis of Aluminum and Aluminum-Base Alloys R(1998) Standard Test Method forExfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys(EXCO Test) (Withdrawn) Standard TestMethod for Water Content of Trichlorotrifluoroethane with Karl FischerReagent *NOT CURRENT DOCUMENT (Withdrawn) Standard TestMethod for Sulfur Dioxide in Workplace Atmoshperes (Barium Perchlorate Method)*NOT CURRENT DOCUMENT R(1984) Standard Test Method forToughness of Wood-Based Structural Panels R(2000) Standard Test Methods forWood-Based Structural Panels in Compression R(2000) Standard Specification for InorganicAggregates for Use in Gypsum Plaster R(2000) Standard Practice for ThickWall, Ring-Lined, Split Barrel, Drive Sampling of Soils Standard Specification forCarbon Structural Steel

Standard Specification forBrass Plate, Sheet, Strip, and Rolled Bar Standard Specification forGypsum Wallboard E1-2000 Standard Test Method forSoftening Point of Bitumen (Ring-and-Ball Apparatus) E1-2000 R(2000) Standard Test Method forCompressibility and Recovery of Gasket Materials Standard Specification forGypsum Lath Standard Test Methods forSealability of Gasket Materials Standard Test Methods forCreep Relaxation of a Gasket Material Standard Test Method forCompressive Strength of Cylindrical Concrete Specimens Standard Test Method forOrganic Impurities in Fine Aggregates for Concrete AASHTO No.: T21 Standard Test Method forElectrical Conductivity of Liquid Hydrocarbons by Precision Meter E1-2001R(2000) Standard Test Method forDetermination of the Odor of Adhesives Standard Test Method for ShearStrength of Adhesives Using Pin-and-Collar Specimen Standard Test Method for GrabBreaking Load and Elongation of Geotextiles R(1996) Standard Specification forAsphalt Primer Used in Roofing, Dampproofing,and Waterproofing E-1; AASHTONo.: M116 R(2000) Standard Specification forSeamless Copper Pipe, Standard Sizes

Standard Test Method forObtaining and Testing Drilled Cores and Sawed Beams of Concrete AASHTO No.:T24 Standard Specification forSeamless Red Brass Pipe, Standard Sizes Standard Specification forCoal Tar Primer Used in Roofing, Dampproofing,and Waterproofing 2AASHTO No.:M121 Standard Test Method forTransverse Compressive Properties of Hoop Wound Polymer Matrix CompositeCylinders R(2000) Standard Test Methods forDetermining the Inclusion Content of Steel E1-1998; E2-1999 Standard Specification forFerritic Malleable Iron Castings Standard Test Method forDetermining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXXAluminum Alloy Products Standard Test Method forStatic Water Absorption of Leather R(2001) Standard Specification forGray Iron Castings E1-1998 Standard Specification forCopper Rod Drawing Stock for Electrical Purposes E2: October 2000 Standard Practice forSampling, Sample Preparation, Packaging, and Marking of Lime and LimestoneProducts Standard Test Methods forChemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Ironand Manganese R(1999) Standard Practices forApparatus, Reagents, and Safety Considerations for Chemical Analysis ofMetals, Ores, and Related Materials Standard Terminology Relatingto Lime and Limestone (as Used by the Industry) Standard Test Method forDetermination of Copper in Unalloyed Copper by Gravimetry Standard Specification forConcrete Brick Standard Practice for SamplingWrought Nonferrous Metals and Alloys for Determination of ChemicalComposition R(1996) Standard Specification forStructural Clay Non-Load- Bearing Tile Standard Specification forGypsum Casting Plaster and Gypsum Molding Plaster Standard Specification forSteam or Valve Bronze Castings Standard Specification forGypsum Keene's Cement Standard Specification forGypsum Keene's Cement Standard Specification forComposition Bronze or Ounce Metal Castings Standard Test Methods forChemical Analysis of Copper and Copper Alloys (Photometric Methods) R(1996) Standard Test Method forResistivity of Metallically Conducting Resistance and Contact MaterialsE1-1995 R(1995) Standard Specification forBronze Castings for Steam Locomotive Wearing Parts Standard Specification forSteel Tie Plates, Low- Carbon and High-Carbon-Hot-Worked Standard Specification for Carand Tender Journal Bearings, Lined

Standard Test Methods forSampling and Testing Brick and Structural Clay Tile AASHTO No.: T 32-70 Standard Specification forSeamless Copper Tube, Bright Annealed Standard Specification forRolled Zinc E2-2000 Standard Test Methods forFriction Tapes Standard Test Method forSurface Moisture in Fine Aggregate AASHTO No.: T142 R(2001) Standard Test Method forDensity of Semi-Solid Bituminous Materials (Pycnometer Method) Standard Test Method for pH ofAqueous Solutions with the Glass Electrode Standard Test Method forRelative Density of Solid Pitch and Asphalt (Displacement Method) R(1999) Standard Test Methods ofConducting Strength Tests of Panels for Building Construction Standard Specification forCalcium Silicate Brick (Sand-Lime Brick) Standard Specification forCast Iron Soil Pipe and Fittings AASHTO No.: M263-77 Standard Practice ofCalibration of Force-Measuring Instruments for Verifying the Force Indicationof Testing Machines Standard Specification forSeamless Copper Tube Standard Specification forSeamless Copper Tube (Metric) Standard Practice for SamplingAggregates AASHTO No. T2 Standard Test Methods forChemical Analysis of Copper- Nickel and Copper-Nickel-Zinc Alloys R(1996) Standard Specification forReinforced Concrete Culvert, Storm Drain, and Sewer Pipe Standard Specification forReinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) Standard Test Methods forChemical Analysis of Nickel- Copper Alloys R(1998) Standard Test Method forInspection and Verification of Thermometers Standard Specification forTreated Core and Nontreated Core Gypsum Sheathing Board Standard Specification forZinc Oxide Pigments AASHTO No.: M124 R(1999) Standard Specification forSteel Wire, Plain, for Concrete Reinforcement AASHTO No.: M 32 Standard Specification for RedLead Pigment E1-1996 R(1996) Standard Practice forVerification and Classification of Extensometers Standard Test Method forSurface Burning Characteristics of Building Materials Standard Practice for ModifiedSalt Spray (Fog) Testing Standard Specification forZinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings E1-2000 Standard Test Method forDistillation of Petroleum Products at Atmospheric Pressure Standard Practice for SurfacePreparation and Marking of Metallic Surgical Implants Standard Test Method forEffect of Organic Impurities in Fine Aggregate on Strength of Mortar E11995R(1995) Standard Specification forSeamless Copper Water Tube E1-2000 Standard Specification for SeamlessCopper Water Tube (Metric) Standard Test Method forSoundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate Standard Test Method forSaybolt Viscosity AASHTO No.: T72 R(1999)

Standard Practice for SamplingNonferrous Metals and Alloys in Cast Form for Determination of ChemicalComposition R(1996) Standard Test Method forWeight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-AlloyCoatings R(1999) Standard Specification forMagnesium-Alloy Sheet and Plate Standard Specification forLoadbearing Concrete Masonry Units Standard Test Method forLaboratory Measurement of Airborne Sound Transmission Loss of BuildingPartitions and Elements Standard Specification forMagnesium-Alloy Forgings Standard Specification forMasonry Cement Standard Test Method forPrecipitation Number of Lubricating Oils Standard Test Methods forSieve Analysis and Water Content of Refractory Materials R(1999) Standard Test Method for Flashand Fire Points by Cleveland Open Cup IP Designation: 36/84 (89); AASHTO No.:T48; DIN 51 376 Standard Test Method forVickers Hardness of Metallic Materials E1-1997; E2-1999; E3-2000 R(1997) Standard Specification forMagnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings,and Die Castings Standard Test Methods forFlash-Point by Pensky- Martens Closed Cup Tester IP Designation: D34/99 Provisional StandardSpecification for Fabricated Shapes and Finished Parts Fabricated fromPolyimide Resins Should Be Used Instead of MIL-R-46198, Which Was Cancelle Standard Specification forMagnesium-Alloy Die Castings R(2000) Standard Specification forReady-Mixed Concrete E1-2001 Standard Test Methods forSaponification Number of Petroleum Products IP Designation: 136S1/98,136S2/99 Standard Test Method for Waterin Petroleum Products and Bituminous Materials by Distillation AASHTO No.T55; API Designation: MPMS Chapter 10.5; IP Designation: 74/8 Standard Specification forCopper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposesand Pressure Vessels Standard Test Methods forWater Vapor Transmission of Materials Standard Test Method for PourPoint of Petroleum Products IP Designation: 15/95 Standard Specification forCopper-Silicon Alloy Rod, Bar and Shapes Standard Specification forCalcium Chloride Standard Specification forCopper-Silicon Alloy Wire for General Applications Standard Test Method forModulus of Rupture of Dimension Stone R(2000) Standard Specification forASTM Hydrometers Standard Specification forLead-Coated Copper Sheet and Strip for Building Construction Standard Specification forPhosphor Bronze Plate, Sheet, Strip, and Rolled Bar E1-1999

Standard Test Method for RapidIndentation Hardness Testing of Metallic Materials E1-1996 R(1996) Standard Practice forMaintaining Constant Relative Humidity by Means of Aqueous Solutions R(1996) Standard Classification Systemfor Nonmetallic Gasket Materials Standard Specification forMagnesium-Alloy Extruded Bars, Rods, Shapes, Tubes, and Wire Standard Specification forSteel Bars, Carbon, Cold- Finished, Standard Quality Standard Specification forAluminum-Alloy Permanent Mold Castings Standard Test Methods for FireTests of Roof Coverings Standard Specification forSteel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled E1-2000 Standard Test Method for CompressiveStrength of Hydraulic Cement Mortars (Using 2-in. or (50-mm) Cube Specimens) Standard Test Methods forPhysical Testing of Quicklime, Hydrated Lime, and Limestone Standard Test Method forIndentation Hardness of Metallic Materials by Portable Hardness Testers E1-1998; E2-1999 R(1997) Standard Specification forCopper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock E1-2000 Standard Test Method forYoung's Modulus, Tangent Modulus, and Chord Modulus Standard Test Methods forDetermining Average Grain Size E1-2000 Standard Test Method forReheat Change of Refractory Brick R(1998) Standard Test Method forDuctility of Bituminous Materials AASHTO No.: T51 Standard Practice forUltrasonic Pulse-Echo Straight- Beam Examination by the Contact Method Standard Specification forMetallic-Coated, Steel- Woven Wire Fence Fabric Standard Test Methods forVitrified Ceramic Materials for Electrical Applications R(1999) Standard Practice forOperating Salt Spray (Fog) Apparatus Standard Test Method forMaterials Finer Than 75- Micrometers (No. 200) Sieve in Mineral Aggregates byWashing Standard Guide for Sampling,Test Methods, Specifications, and Guide for Electrical Insulating Oils ofPetroleum Origin Standard Terminology Relatingto Dimension Stone Standard Test Methods for FireTests of Building Construction and Materials Standard Test Method for Rateof Grease Penetration of Flexible Barrier Materials (Rapid Method) R(1998) Standard Test Methods ofFlexure Testing of Slate (Modulus of Rupture, Modulus of Elasticity) Standard Specification forRubber Insulating Gloves R(2000) Standard Test Methods forChemical Analysis of Titanium and Titanium Alloys Standard Specification forMetallic-Coated Carbon Steel Barbed Wire Standard Specification forLeaded Brass Plate, Sheet, Strip, and Rolled Bar Standard Test Method for WaterAbsorption of Slate R(1999) Standard Specification forCopper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), andCopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar

Standard Specification forZinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products Standard Test Method forLightweight Particles in Aggregate AASHTO No.: T113 Standard Terminology Relatingto Textiles Standard Specification forCopper and Copper Alloy Forging Rod, Bar, and Shapes Standard Specification forSteel Springs, Helical, Heat-Treated E1-1996 Standard Terminology Relatingto Concrete and Concrete Aggregates Standard Reference Photographsfor Magnetic Particle Indications on Ferrous Castings R(1997) Standard Specification forGray Iron Castings for Valves, Flanges, and Pipe Fittings E1-1998 Standard Specification forCeramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid MasonryUnits Standard Test Methods forAnalysis of Yellow, Orange, and Green Pigments Containing Lead Chromate andChromium Oxide Green R(1997) Standard Test Method forInspection and Verification of Hydrometers R(1998) Standard Specification forNickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip Standard Test Method forSpecific Gravity and Absorption of Coarse Aggregate R(2001) Standard Test Method for DropMelting Point of Petroleum Wax Including Petrolatum IP Designation:133/79(87); TAPPI T 634ts-64 R(1999) Standard Practice forFabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks Standard Specification forSteel Castings, Austenitic Manganese R(1998) Standard Test Method forSpecific Gravity and Absorption of Fine Aggregate Standard Test Methods forAnalysis of Lubricating Grease Standard Specification forNonloadbearing Concrete Masonry Units Standard Test Method forSulfur in Petroleum Products (General Bomb Method) British Standard 4454; IPDesignation: 61/99 Standard Test Method forDetection of Copper Corrosion from Petroleum Products by the Copper StripTarnish Test IP Designation: 154/93; British Standard 4351; E1- 200 Standard Specification forStructural Steel for Ships Standard Test Method forResistance to Degradation of Small-Size Coarse Aggregate by Abrasion andImpact in the Los Angeles Machine Standard Test Method forPoisson's Ratio at Room Temperature Standard Test Methods for ColdCrushing Strength and Modulus of Rupture of Refractories Standard Specification forPipe, Steel, Electric- Fusion (Arc)-Welded (Sizes NPS 16 and over) Standard Specification forBrass Wire Standard Specification forSeamless Brass Tube Standard Specification forSeamless Brass Tube (Metric) Standard Test Method for TrueSpecific Gravity of Refractory Materials by Water Immersion Standard Method forMeasurement of Stain Resistance of Anodic Coatings on Aluminum R(1998)

Standard Test Method for SieveAnalysis of Fine and Coarse Aggregates Standard Test Method forBehavior of Materials in a Vertical Tube Furnace at 750 Degrees C E1-2000 Standard Test Method forMeasurement of Coating Mass per Unit Area on Anodically Coated AluminumR(2000) Standard Test Method forFlexibility of Resilient Flooring Materials with Cylindrical MandrelApparatus E11994 R(1994) Standard Specification forManganese Bronze Rod, Bar and Shapes Standard Specification forManganese Bronze Rod, Bar and Shapes (Metric) Standard Test Method for UnitWeight, Yield, and Air Content (Gravimetric) of Concrete AASHTO No.: T121 Standard Specification forWrought 18 Chromium- 14 Nickel-2.5 Molybdenum Stainless Steel Bar and Wirefor Surgical Implants (UNS S31673) Standard Specification forElectric-Fusion (Arc)- Welded Steel Pipe (NPS 4 and Over) Standard Specification forPhosphor Bronze Rod, Bar, and Shapes Standard Specification forPhosphor Bronze Rod, Bar, and Shapes (Metric) Standard Specification forConcrete Masonry Units for Construction of Catch Basins and Manholes Standard Test Methods for ConductingCreep, Creep- Rupture, and Stress-Rupture Tests of Metallic Materials Standard Specification forCopper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar and Shapes E1,E22000 Standard Test Methods forSampling and Testing Concrete Masonry Units and Related Units Standard Practice for SamplingBituminous Materials Standard Specification forHydraulic Hydrated Lime for Structural Purposes Standard Test Method for ClayLumps and Friable Particles in Aggregates AASHTO No.: T112 Standard Practice forSafeguarding Against Embrittlement of Hot-Dip Galvanized Structural SteelProducts and Procedure for Detecting Embrittlement R(1999) Standard Test Method for Slumpof Hydraulic-Cement Concrete Standard Specification forAggregate for Masonry Mortar AASHTO No.: M45-70(1974) Standard Specification forGravity-Convection and Forced-Ventilation Ovens E1-1995 Standard Test Methods forSampling and Testing Bitumen- Saturated Felts and Woven Fabrics for Roofingand Waterproofing Standard Test Method forFlexibility of Non-Metallic Gasket Materials R(1997) Standard Specification forAluminum-Bronze Sand Castings E1-2001 Standard Test Methods forPolariscopic Examination of Glass Containers Standard Test Method forThermal Shock Resistance of Glass Containers R(2000) Standard Test Method forDielectric Breakdown Voltage and Dielectric Strength of Solid ElectricalInsulating Materials at Commercial Power Frequencies Standard Specification forAluminum Bronze Rod, Bar, and Shapes E2-1999 Standard Specification forAluminum Bronze, Rod, Bar, and Shapes (Metric) Standard Specification forPortland Cement

Standard Test Methods for ACLoss Characteristics and Permittivity (Dielectric Constant) of SolidElectrical Insulation Standard Test Method forElectrical Resistance of Conductive Resilient Flooring Reinstated Standard Specification forCopper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar Standard Test Methods forTension Testing of Nonmetallic Gasket Materials Standard Specification forZinc Coating (Hot-Dip) on Iron and Steel Hardware AASHTO No.: M232 Standard Test Method forExpansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing E1-1996R(1996) Standard Test Methods forSpecific Gravity of Pigments E1-1996 R(1996) Standard Test Method forMercurous Nitrate Test for Copper and Copper Alloys Standard Test Methods forWater Vapor Retarders Used in Contact with Earth under Concrete Slabs, on Walls,or as Ground Cover Standard Reference Radiographsfor Inspection of Aluminum and Magnesium Castings Standard Test Method for WaterRetention by Concrete Curing Materials Standard Test Method forSaybolt Color of Petroleum Products (Saybolt Chromometer Method) Standard Test Method forLength Change of Hardened Hydraulic-Cement Mortar and Concrete Standard Test Methods forStrength of Glass by Flexure (Determination of Modulus of Rupture) R(2000) Standard Specification forAutomotive Gray Iron Castings R(1993) Standard Specification forPhosphor Bronze Wire E1 Standard Specification forVitrified Clay Filter Blocks Standard Specification forNickel Plate, Sheet, and Strip Standard Terminology of Glassand Glass Products Standard Test Method forSurface Flammability of Materials Using a Radiant Heat Energy Source Standard Specification forSeamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes Standard Specification forNickel-Copper Alloy Rod, Bar, and Wire Standard Practice forUltrasonic Contact Examination of Weldments Standard Specification of Nickel-CopperAlloy (UNS N04400) Seamless Pipe and Tube Standard Test Method forMeasuring Compressive Properties of Thermal Insulations Standard Specification forNickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, andN06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N0661 Standard Specification forStainless and Heat- Resisting Chromium-Nickel Steel Plate, Sheet, and Strip Standard Specification forNickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, andN06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N0661 Standard Test Methods forThickness and Density of Blanket or Batt Thermal Insulations Standard Practice forGoniophotometry of Objects and Materials Standard SpecificationNickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06025, andN06045) and Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617) P Standard Practices for GeneralTechniques of Infrared Quantitative Analysis Standard Specification forAluminum Bronze Sheet, Strip, and Rolled Bar

Standard Specification forAluminum Bronze Sheet, Strip, and Rolled Bar (Metric) Standard Test Methods forChemical Analysis of Soda- Lime and Borosilicate Glass R(2000) Standard Specification forOxygen-Free Electrolytic Copper - Refinery Shapes Standard Test Method forCompressive Strength of Dimension Stone R(1999) Standard Specification forCopper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and HeatExchangers E1-2001 Standard Specification forSheet Materials for Curing Concrete Standard Specification forStandard Atmospheres for Conditioning and Testing Flexible Barrier MaterialsR(1998) Standard Practice for SamplingFreshly Mixed Concrete Standard Test Method for AirContent of Freshly Mixed Concrete by the Volumetric Method E1-1995 Standard Specification for Bitumen-SaturatedCotton Fabrics Used in Roofing and Waterproofing Standard Specification forBunch-Stranded Copper Conductors for Electrical Conductors Standard Test Method forMeasuring Thickness of Concrete Elements Using Drilled Concrete Cores AASHTONo.: T 148 Standard Terminology ofMicroscopy E1-2000 R(1999) Standard Specification forStainless and Heat- Resisting Chromium Steel Plate, Sheet, and Strip Standard Specification forCopper-Alloy Die Castings Standard Guide for ChromiumElectroplating on Steel for Engineering Use Standard Test Method forSteady-State Heat Flux Measurements and Thermal Transmission Properties byMeans of the Guarded-Hot-Plate Apparatus Standard Practice for Use ofthe Terms Precision and Bias in ASTM Test Methods R(1996) Standard Specification forElectric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler andSuperheater Tubes R(2000) Standard Specification forAluminum Alloys in Ingot and Molten Forms for Castings from All CastingProcesses Standard Specification forCarbon Steel Track Bolts and Nuts Standard Practice forPreparation of Low-Carbon Steel for Electroplating R(1997) Standard Practice for Samplingand the Amount of Testing of Hydraulic Cement Standard Specification forWelded Deformed Steel Bar Mats for Concrete Reinforcement Standard Specification forSteel Welded Wire Fabric, Plain, for Concrete Reinforcement Standard Test Method for AirContent of Hydraulic Cement Mortar AASHTO No.: T137 Standard Reference Radiographsfor Heavy-Walled (2 to 4 1/2-in. (51 to 114-mm)) Steel Castings Standard Specification forCopper Bar, Bus Bar, Rod, and Shapes Standard Test Method forBurning Quality of Kerosine R(1999) Standard Specification forSeamless Copper Bus Pipe and Tube Standard Test Method forDensity of Hydraulic Cement AASHTO No.: T133 Standard Specification forLead-Coated and Lead-Alloy- Coated Soft Copper Wire for Electrical Purposes

Standard Test Method forConradson Carbon Residue of Petroleum Products IP Designation: 13/94; BritishStandard 4380 Standard Test Method forGuided Bend Test for Ductility of Welds R(1997) Standard Specification forApparatus for Microdetermination of Carbon and Hydrogen in Organic andOrganoMetallic Compounds E1-2000 R(1999) Standard Specification forSeamless Carbon Steel Boiler Tubes for High-Pressure Service E1-1996 R(1996) Standard Practice for Makingand Curing Concrete Test Specimens in the Laboratory Standard Reference Radiographsfor Investment Steel Castings of Aerospace Applications R(1999) Standard Specification forAlloy-Steel and Stainless Steel Bolting Materials for High-TemperatureService

Standard Specification forLaboratory Glass Micropipets R(1999) Standard Specification forCarbon and Alloy Steel Nuts for Bolts for High Pressure or High TemperatureService, or Both Standard Specification forMineral Fiber Thermal Insulating Cement Standard Specification forCopper-Beryllium Alloy Rod and Bar Standard Specification forCopper-Beryllium Alloy Rod and Bar (Metric) Standard Specification forExpanded or Exfoliated Vermiculite Thermal Insulating Cement Standard Practice for GravityLoad Testing of Floors and Low Slope Roofs E1-2000 R(2000) Standard Specification forCupola Malleable Iron Standard Specification forCopper-Beryllium Alloy Wire Standard Specification forMagnesium-Alloy Permanent Mold Castings Standard Test Method for PierTest for Refractory Mortars R(2000) Standard Specification forElectrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and FerrousAlloys R(1999) Standard Practice forPreparation, Standardization, and Storage of Standard and Reagent Solutionsfor Chemical Analysis Standard Practice for TestingChromate Coatings on Zinc and Cadmium Surfaces R(2000) Standard Test Methods forSampling and Testing Untreated Paper Used for Electrical Insulation Standard Test Methods forAnalysis of Ethylene Glycols and Propylene Glycols Standard Specification forPressure Vessel Plates, Alloy Steel, Nickel Standard Test Methods forBreaking Load and Flexural Properties of Block-Type Thermal Insulation Standard Test Method for WaterUsing Volumetric Karl Fischer Titration Standard Specification forPressure Vessel Plates, Alloy Steel, Molybdenum R(1999) Standard Test Methods forSewing Threads

Standard Specification forCopper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire Standard Specification forFinishing Hydrated Lime R(1997) Standard Specification forHydrated Lime for Masonry Purposes R(1997) Standard Practice forPreparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold,Centrifugal, and Continuous Castings Standard Test Method forConducting Drop-Weight Test to Determine Nil-Ductility Transition Temperatureof Ferritic Steels R(2000) Standard Specification forAluminum and Aluminum-Alloy Sheet and Plate Standard Specification forAluminum and Aluminum-Alloy Sheet and Plate (Metric) Standard Test Methods forCellulosic Fiber Insulating Board Standard Specification forLampblack Pigment E1-1996 R(1996) Standard Specification forAluminum and Aluminum-Alloy Drawn Seamless Tubes Standard Specification forAluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric) Standard Test Method forReheat Change of Insulating Firebrick R(1999) Standard Specification forAluminum and Aluminum-Alloy Bar, Rod, and Wire Standard Specification forAluminum and Aluminum-Alloy Bar, Rod, and Wire (Metric) Standard Test Method forApparent Density of Free- Flowing Metal Powders Using the Hall FlowmeterFunnel R(1995) Standard Specification forStructural Clay Facing Tile Standard Test Method for FlowRate of Metal Powders Standard Specification forElectric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes Standard Test Method for SieveAnalysis of Granular Metal Powders Standard Practices forSampling Finished Lots of Metal Powders Standard Test Method forFundamental Transverse, Longitudinal, and Torsional Resonant Frequencies ofConcrete Specimens E1-1999 Standard Practice forStandardizing Equipment for Electromagnetic Examination of SeamlessAluminum-Alloy Tube Standard Specification forSeamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes E1-2000; Replaces A200-1994 and A271- 1996 Standard Specification forSteel Castings, Carbon, Suitable for Fusion Welding, for High-TemperatureService R(1998) Standard Specification forSteel Castings, Martensitic Stainless and Alloy, for Pressure-ContainingParts, Suitable for High-Temperature Service Standard Test Method forWeather Resistance of Slate R(1999) Standard Test Methods for ConePenetration of Lubricating Grease IP Designation: 50/88 Standard Specification forPearlitic Malleable Iron Standard Test Method forCalibration of Thermocouples By Comparison Techniques E1-1996 R(1996) Standard Specification forAluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

Standard Specification forAluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes(Metric) Standard Test Methods forAnalysis of Sulfuric Acid Standard Specification forSmooth-Surfaced Asphalt Roll Roofing (Organic Felt) R(1996) Standard Test Methods forAnalysis of Hydrochloric Acid Standard Test Methods forResistance of Glass Containers to Chemical Attack R(1999) Standard Specification forAsphalt Shingles (Organic Felt) Surfaced with Mineral Granules Standard Specification forAir-Entraining Additions for Use in the Manufacture of Air-Entraining HydraulicCement Standard Specification forAsphalt-Saturated Organic Felt Used in Roofing and Waterproofing Standard Specification forSteel Wire, Cold-Drawn for Mechanical Springs Standard Specification forHard-Drawn Copper-Clad Steel Wire Standard Test Method forPotential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-BarMethod) Standard Specification forCoal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing Standard Test Method forOptical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys bythe Point-To-Plane Technique R(1996) Standard Specification forSteel Wire, Music Spring Quality Standard Specification forConcentric-Lay-Stranded Copper-Clad Steel Conductors Standard Test Method forLinear Thermal Expansion of Solid Materials with a Vitreous SilicaDilatometer Standard Specification forSteel Wire, Oil-Tempered for Mechanical Springs Standard Specification forConcentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors Standard Test Methods forRigid Sheet and Plate Materials Used for Electrical Insulation Standard Specification forSteel Wire, Oil-Tempered Carbon Valve Spring Quality Standard Specification forAluminum 1350-H19 Wire for Electrical Purposes Standard Specification forChromium-Vanadium Alloy Steel Spring Wire Standard Specification forConcentric-Lay-Stranded Aluminum 1350 Conductors Standard Test Method for AirContent of Freshly Mixed Concrete by the Pressure Method E1-1999 Standard Specification for Chromium-VanadiumAlloy Steel Valve Spring Quality Wire Standard Test Methods forBleeding of Concrete Standard Test Method forAir-Entraining Admixtures for Concrete Standard Test Methods ofSampling and Testing Turpentine

Standard Specification forMineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent) Standard Specification forAluminum Bars for Electrical Purposes (Bus Bars) Standard Specification forAluminum Bars for Electrical Purposes (Bus Bars) (Metric) Standard Test Method forSteady-State Thermal Performance of Building Assemblies by Means of a GuardedHot Box E1-1993 R(1993) Standard Practice for Locatingthe Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel ArticlesR(1999) Standard Specification forZinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die CastingsE1- 2000 Standard Test Method for Heatof Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter Standard Specification forAluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube Standard Test Method forAbrasion Resistance of Stone Subjected to Foot Traffic E1-1997 R(1997) Standard Specification forHigh-Strength Low-Alloy Structural Steel AASHTO No.: M 161

Standard Specification forMineral Filler for Bituminous Paving Mixtures E1-2001 R(2000) Standard Practice forElectromagnetic (Eddy-Current) Examination of Copper and Copper-Alloy Tubes Standard Test Method forMeasurement of Thickness of Anodic Coatings on Aluminum and of OtherNonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Ins Standard Test Methods andPractices for Emulsified Asphalts AASHTO No.: T59 Standard Specification forTinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes Standard Test Method forEvaluating the Microstructure of Graphite in Iron Castings R(1998) Standard Specification forAluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled RingForgings Standard Specification forAluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled RingForgings (Metric) Standard Specification forGeneral Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip,and Rolled Bar Standard Specification forGeneral Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip,and Rolled Bar (Metric) Standard Test Method forDetermination of Manganese in Manganese Ores by Pyrophosphate ComplexedPermanganate Potentiometric Titration Standard Specification forWelded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and CondenserTubes E1-1999 Standard Specification forGeneral Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes andForgings Standard Specification forAsphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules R(1996) Standard Specification forGeneral Requirements for Wrought Copper Alloy Wire Standard Specification forGeneral Requirements for Wrought Copper-Alloy Wire (Metric) Standard Specification for GeneralRequirements for Wrought Seamless Copper and Copper-Alloy Tube Standard Specification forGeneral Requirements for Wrought Seamless Copper and Copper-Alloy Tube(Metric)

Standard Test Methods forPerformance Characteristics of Metallic Bonded Resistance Strain GagesR(1998) Standard Specification forWelded and Seamless Steel Pipe Piles E1-2000 Standard Test Method forThickness of Thin Foil and Film by Weighing R(1999) Standard Guide for Preparationof Aluminum Alloys for Electroplating E1-1999 R(1999) Standard Specification forCopper-Brazed Steel Tubing Standard Practice forPreparation of and Electroplating on Stainless Steel R(1998) Standard Test Methods forDetermining Hardenability of Steel Standard Test Methods forDetermining the Izod Pendulum Impact Resistance of Plastics Standard Test Method forChlorine in Organic Compounds by Sodium Peroxide Bomb Ignition Standard Test Methods for DCResistance or Conductance of Insulating Materials Standard Test Method forSulfur in Organic Compounds by Sodium Peroxide Bomb Ignition Standard Specification forStandard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of SolidRound Wires Used as Electrical Conductors Standard Test Method for TotalNitrogen in Organic Materials by Modified Kjeldahl Method E1-1996 R(1996) Standard Specification forAir-Entraining Admixtures for Concrete Standard Specification forBoiled Linseed Oil E1-1995 R(1995) Standard Specification forIron Blue Pigment R(1999) Standard Practices forDetecting Susceptibility to Intergranular Attack in Austenitic StainlessSteels Standard Specification forCorrosion-Resisting Chromium Steel-Clad Plate, Sheet, and Strip R(1999) Standard Test Method forDetermination of Cross- Sectional Area of Stranded Conductors Standard Specification forChrome Oxide Green Pigment R(1999) Standard Test Method forMeasuring Fast-Neutron Reaction Rates by Radioactivation of Iron Standard Specification forStainless Chromium-Nickel Steel-Clad Plate, Sheet, and Strip R(1999) Standard Test Method forMeasuring Fast-Neutron Reaction Rates by Radioactivation of Nickel R(1996) Standard Specification forNickel and Nickel-Base Alloy-Clad Steel Plate R(1999) Standard Specification for Titaniumand Titanium Alloy Strip, Sheet, and Plate Standard Test Method forMeasuring Reaction Rates and Fast-Neutron Fluences by Radioactivation ofSulfur-32 Standard Test Methods forChemical Resistance of Mortars, Grouts, and Monolithic Surfacings and PolymerConcretes Standard Specification forSeamless and Welded Ferritic and Martensitic Stainless Steel Tubing forGeneral Service Standard Guide for Samplingand Testing Volatile Solvents and Chemical Intermediates for Use in Paint andRelated Coatings and Material Standard Specification forMortar for Unit Masonry Standard Specification forCopper-Base Alloy Centrifugal Castings Standard Specification for CopperFlat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

Standard Test Method for WaterAbsorption of Core Materials for Structural Sandwich Constructions R(1996) Standard Reference Radiographsfor High-Strength Copper-Base and Nickel-Copper Alloy Castings Standard Test Method for ShearProperties of Sandwich Core Materials E1-2000 Standard Practice forUltrasonic Examination of Longitudinal Welded Pipe and Tubing Standard Test Method forMagnetic Particle Examination of Steel Forgings Standard Practice forCodification of Certain Nonferrous Metals and Alloys, Cast and Wrought Standard Specification forStainless Steel Bars and Shapes Standard Test Method forApparent Porosity in Cemented Carbides R(2000) Standard Test Methods forIdentification of Fibers in Textiles Standard Specification forGray Iron Castings for Pressure-Containing Parts for Temperatures up to 650Degrees F Standard Specification forGray Iron Castings for Pressure-Containing Parts for Temperatures up to 350Degrees C E1-1996 Standard Test Methods forBleeding of Pigments R(1997) Standard Specification forSeamless Copper Tube for Air Conditioning and Refrigeration Field Service E1-2000 Standard Test Methods forHygroscopic Moisture (and Other Matter Volatile under the Test Conditions) inPigments R(1995) Standard Reference Radiographsfor Heavy-Walled (4 1/2 to 12-in. (114 to 305-mm)) Steel Castings Standard Practice forPreparation of Copper and Copper- Base Alloys for Electroplating andConversion Coatings R(1995) Standard Test Method for OilAbsorption of Pigments by Spatula Rub-Out Standard Test Method for AcidResistance of Porcelain Enamels (Citric Acid Spot Test) Standard Specification for Lowand Intermediate Tensile Strength Carbon Steel Plates Standard Specification forCopper and Copper-Alloy Die Forgings (Hot-Pressed) Standard Test Methods forChemical Analysis of Cuprous Oxide and Copper Pigments R(1999) Standard Test Method forDetermining Rate of Air Leakage Through Exterior Windows, Curtain Walls, andDoors Under Specified Pressure Differences Across the Specimen R Standard Specification forCopper Conductors for Use in Hookup Wire for Electronic Equipment Standard Terminology Relatingto Porcelain Enamel and Ceramic-Metal Systems Standard Test Method for APIGravity of Crude Petroleum and Petroleum Products (Hydrometer Method) E12000R(2000) Standard Specification forLaboratory Glass Volumetric Flasks R(1998) Standard Specification forTungsten Wire for Electron Devices and Lamps E1-1996 R(1996) Standard Test Method forPotential Alkali-Silica Reactivity of Aggregates (Chemical Method) Standard Test Methods for BendTesting of Material for Ductility

Standard Test Methods forChemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide andPotassium Hydroxide) Standard Test Method forFlexural Strength of Concrete (Using Simple Beam with Center-Point Loading) Standard DescriptiveNomenclature for Constituents of Concrete Aggregates Standard Specification forHigh-Carbon Anti-Friction Bearing Steel Standard Guide forPetrographic Examination of Aggregates for Concrete Standard Test Methods forVarnished Cotton Fabrics Used for Electrical Insulation Standard Test Method forFlatwise Tensile Strength of Sandwich Constructions R(1999) Standard Test Methods forRubber Products - Chemical Analysis R(1998) Standard Specification forSilver-Coated Soft or Annealed Copper Wire Standard Practice for SamplingIndustrial Chemicals R(1996) Standard Specification forFree-Cutting Copper Rod, Bar, Wire and Shapes Standard Test Methods forVitrified Clay Pipe Standard Test Methods forSoluble Cellulose Nitrate R(1999) Standard Specification forPressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and ManganeseMolybdenum-Nickel E1-1999 Standard Specification forThreadless Copper Pipe, Standard Sizes Standard Test Method forDensity and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation Standard Test Method forDimensions and Density of Preformed Block and Board - Type Thermal Insulation Standard Specification forCarbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements Standard Specification forn-Butyl Alcohol (Butanol) R(1999) Standard Test Method forSolvent-Extractable Material in Black Pigments R(1999) Standard Specification forCopper Drainage Tube (DWV) Standard Specification forCarbon Steel Bolts and Studs, 60 000 psi Tensile Strength Standard Test Method forTensile Strength of Chemical- Resistant Mortar, Grouts, and MonolithicSurfacings Standard Practice for SamplingPressurized Gas for Gas Analysis E1-1995 R(1995) Standard Specification forSteel Sheet, Terne (Lead- Tin Alloy) Coated by the Hot-Dip Process Standard Specification forAluminum-Alloy 6061-T6 Standard Structural Profiles Standard Practice forComputing the Colors of Objects by Using the CIE System Standard Test Method forWeight and Composition of Coating on Terne Sheet by the Triple-Spot TestR(1999) Standard Specification forLiquid Membrane-Forming Compounds for Curing Concrete Standard Practice forEddy-Current Examination of Steel Tubular Products Using Magnetic Saturation Standard Reference Radiographsfor Tin Bronze Castings Standard Practice for SamplingCryogenic Aerospace Fluids R(2000) Test Method for DensityDetermination for Powder Metallurgy (P/M) Materials Containing Less Than TwoPercent Porosity R(1997) Standard Test Methods forSampling and Testing Fly Ash or Natural Pozzolans for Use as a MineralAdmixture in Portland-Cement Concrete

Standard Specification forSeamless and Welded Austenitic Stainless Steel Pipes

Standard Specification forAsphalt Used in Roofing Standard Specification forStainless Steel Spring Wire Standard Specification forAluminum and Aluminum-Alloy Round Welded Tubes Standard Specification forStainless Steel Billets and Bars for Forging Standard Specification forSeamless Copper Alloy Pipe and Tube Standard Specification forClay Flue Linings Standard Specification forAluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods Standard Specification forAluminum-Alloy Extruded Bar, Rod, Tube, Pipe, and Structural Profiles forElectrical Purposes (Bus Conductor) Standard Specification forGypsum Concrete Standard Specification forGypsum Formboard Standard Specification forAlloy/Steel Bolting Materials for Low-Temperature Service

Standard Test Method for HailImpact Resistance of Aerospace Transparent Enclosures R(1999) Standard Test Method for BondStrength of Chemical- Resistant Mortars Standard Specification forSteel Bars, Alloy, Standard Grades R(1996) Standard Guide for CleaningMetals Prior to Electroplating Standard Test Method forGasoline Diluent in Used Gasoline Engine Oils by Distillation IP Designation:23/83 (92) Standard Test Method for VaporPressure of Petroleum Products (Reid Method) Standard Specification forStructural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile StrengthAASHTO No.: M 164 Standard Specification forHigh-Strength Bolts for Structural Steel Joints (Metric) Standard Test Methods forImpact Testing of Cast Irons R(1997) Standard Specification forSteel Sheet Piling AASHTO No.: M 202 Standard Test Method forDensity, Oil Content, and Interconnected Porosity of Sintered MetalStructural Parts and Oil-Impregnated Bearings Standard Test Method forApparent Density of Metal Powders and Compounds Using the Scott Volumeter Standard Specification forAcetone Standard Specification forAgencies Engaged in the Testing and/or Inspection of Materials Used inConstruction Standard Test Method forFisher Number of Metal Powders and Related Compounds Standard Specification forLightweight Aggregates for Structural Concrete

Standard Specification for2-Butoxyethanol R(1997) Standard Test Method forStructural Performance of Exterior Windows, Curtain Walls, and Doors byUniform Static Air Pressure Difference E1-1998 Standard Test Method for BirdImpact Testing of Aerospace Transparent Enclosures R(1999) Standard Specification forSteel Bars, Alloy, Cold- Finished R(2000) Standard Specification forLightweight Aggregates for Concrete Masonry Units Standard Specification for2-Ethoxyethanol R(1999) Standard Test Method for WaterPenetration of Exterior Windows, Skylights, Doors, and Curtain Walls byUniform Static Air Pressure Difference Standard Specification forLightweight Aggregates for Insulating Concrete Standard Specification forSeamless and Welded Steel Pipe for Low-Temperature Service Standard Specification forNickel-Molybdenum Alloy Plate, Sheet, and Strip Standard Practice for GeneralTechniques of Infrared Microanalysis Standard Specification forSeamless Ferritic Alloy- Steel Pipe for High-Temperature Service Standard Specification forNickel-Molybdenum Alloy Rod Standard Test Method forSteady-State Heat Transfer Properties of Horizontal Pipe Insulation Standard Test Method forHydroxyl Groups by Pyromellitic Dianhydride Esterification Standard Specification forAlloy Steel Forgings for Pressure and High-Temperature Parts E1-2000 Standard Test Method forAnnealing Point and Strain Point of Glass by Fiber Elongation R(2000) Standard Test Method forMeasurement of Airborne Sound Insulation in Buildings Standard Specification forSeamless and Welded Titanium and Titanium Alloy Tubes for Condensers and HeatExchangers Standard Test Method forSoftening Point of Glass R(1998) Standard Test Method ofSharp-Notch Tension Testing of High-Strength Sheet Materials R(1997) Standard Specification for PigTin Standard Test Method forMacroetching Metals and Alloys Standard Test Method forDirect Current Magnetic Properties of Materials Using D-C Permeameters andthe Ballistic Test Methods Standard Viscosity-TemperatureCharts for Liquid Petroleum Products R(1998) Standard Test Methods forPermeability of Feebly Magnetic Materials Standard Specification forAluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gasand Oil Transmission and Distribution Piping Systems Standard Test Method forSampling and Testing Calcium Chloride for Roads and Structural Applications Standard Test Methods ofTension Testing of Metallic Foil R(1998) Standard Test Methods forAnalysis of Methanol Standard Specification forTitanium and Titanium Alloy Bars and Billets Standard Test Methods forRigid Tubes Used for Electrical Insulation Standard Specification forCarbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing forPiping Components

Standard Test Methods forFlexible Treated Sleeving Used for Electrical Insulation Standard Test Methods forChemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel,Ingot Iron, and Wrought Iron E1-2000 R(2000) Standard Specification forCastings, Austenitic, Austenitic-Ferritic (Duplex), for Pressure-ContainingParts Used in USDOE-NE Standards Standard Classification forNatural Muscovite Block Mica and Thins Based on Visual Quality Standard Test Methods forChemical Analysis of Cast Iron - All Types E1-2000 R(2000) Standard Specification forSteel Castings, Ferritic and Martensitic, for Pressure-Containing Parts,Suitable for Low-Temperature Service R(1998) Standard Specification forQuenched and Tempered Alloy Steel Bolts, Studs, and Other Externally ThreadedFasteners Standard Test Methods forChemical Analysis of High- Temperature, Electrical, Magnetic, and OtherSimilar Iron, Nickel, and Cobalt Alloys E1-2000 R(2000) Standard Specification forNickel-Coated Soft or Annealed Copper Wire Standard Practice for GasChromatography Terms and Relationships R(2001) Standard Test Method forLinear Shrinkage of Preformed High-Temperature Thermal Insulation Subjectedto Soaking Heat E1-1992 R(1997) Standard Test Method forPhosphorus in Organic Compounds by Sodium Peroxide Bomb Ignition Standard Specification forWood to Be Used as Panels in Weathering Tests of Coatings Standard Test Methods forAnalysis of Phosphoric Acid Standard Specification forCopper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes withIntegral Fins Standard Test Methods forAnalysis of Soda Ash (Sodium Carbonate) Standard Specification forFactory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings Standard Specification forReinforced Concrete Low- Head Pressure Pipe Standard Specification forReinforced Concrete Low- Head Pressure Pipe (Metric) Standard Specification forSeamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings Standard Test Method forFlatwise Compressive Properties of Sandwich Cores Standard Specification forCommercial Steel (CS) Sheet, Carbon, (0.15 Maximum Percent) Cold-Rolled E11998 Standard Test Methods forMeasurement of Thickness of Sandwich Cores Standard Specification forFixation Pins and Wires R(2000) Standard Specification forTitanium and Titanium Alloy Castings R(1998) Standard Method forCopper-Accelerated Acetic Acid- Salt Spray (Fog) Testing (CASS Test) Standard Specification forCopper-Nickel Alloy Castings Standard Test Method forSpecific Gravity of Creosote Fractions and Residue AASHTO No. T 74; E11995R(1995) Standard Test Methods andDefinitions for Mechanical Testing of Steel Products Standard Specification forCopper Sheet and Strip for Building Construction Standard Specification forCopper-Zinc-Silicon Alloy Rod Standard Specification forAsphalt Roll Roofing (Organic Felt) Surfaced with Mineral Granules; WideSelvage R(1996) Standard Specification forSeamless Copper and Copper- Alloy Rectangular Waveguide Tube

Standard Specification forAluminum Foil for Capacitors Standard Test Methods forThickness of Solid Electrical Insulation Standard Practice forMeasuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic)Test Methods Standard Practice forCleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, andSystems E12000 Standard Test Methods forRubber Hose R(2000) Standard Test Method for Gum Contentin Fuels by Jet Evaporation IP Designation: 131/99 Standard Test Method forMicroindentation Hardness of Materials Standard Practice forProviding High-Quality Zinc Coatings (Hot-Dip) Standard Test Method for Thicknessof Resilient Flooring Materials Having Flat Surfaces Standard Specification forPressure Vessel Plates, Alloy Steel, Chromium-Molybdenum Standard Test Method for Colorand Strength of Chromatic Pigments with a Mechanical Muller Standard Test Method forMeasuring Thickness of Resilient Floor Covering with Foam Layer Standard Specification forSteel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts,Suitable for High-Temperature Service R(1998) Standard Criteria for Samplingand Acceptance of Preformed Thermal Insulation Lots R(2000) Standard Specification forCoal-Tar Creosote for the Preservative Treatment of Piles, Poles, and Timbersfor Marine, Land, and Freshwater Use R(1999) Standard Reference Radiographsfor Steel Fusion Welds Standard Test Method forFlexural Properties of Sandwich Constructions Standard Specification forSteel Transmission Tower Bolts, Zinc-Coated and Bare Standard Specification forFerritic Ductile Iron Pressure-Retaining Castings for Use at ElevatedTemperatures Standard Specification forU-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes Standard Specification forU-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes(Metric) Standard Specification forChemical-Resistant Resin Mortars Standard Test Methods forRubber Property - Compression Set Standard Specification forFuel Oils Standard Specification forConcentric-Lay-Stranded Aluminum-Alloy 5005-H19 Conductors R(1999) Standard Specification forConcentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors Standard Test Method forPlane-Strain Fracture Toughness of Metallic Materials R(1997) Standard Practice for SteelBars, Selection Guide, Composition, and Mechanical Properties R(2000) Standard Classification ofAlumina and Alumina- Silicate Castable Refractories R(2000) Standard Practice for SafeHandling of Solvent Cements, Primers, and Cleaners Used for JoiningThermoplastic Pipe and Fittings R(1999) Standard Specification forWrought Austenitic Stainless Steel Piping Fittings

Standard Specification forMagnesium-Alloy Investment Castings

Standard Test Method for Timeof Setting of Concrete Mixtures by Penetration Resistance Standard Specification forAggregates for Masonry Grout Standard Specification forCorrugated Polyethylene (PE) Pipe and Fittings Standard Test Method forTransverse Rupture Strength of Cemented Carbides R(2000) Standard Practice forMicroetching Metals and Alloys Standard Test Method forThermal Conductivity of Whiteware Ceramics R(1999) Standard Test Method forGrindability of Coal by the Hardgrove-Machine Method E2-2000 Standard Specification forThermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings Standard Test Method for WearLayer Thickness of Resilient Floor Coverings by Optical Measurement Standard Specification forZinc-Coated (Galvanized) Low-Carbon Steel Armor Wire Standard Specification forCopper-Nickel-Silicon Alloy Rod and Bar Standard Test Method forHot-Surface Performance of High-Temperature Thermal Insulation (Discontinued) StandardSpecification for Copper- Nickel-Silicon Alloy Wire Standard Specification forConcrete Drain Tile Standard Specification forConcrete Drain Tile (Metric) Standard Test Methods forVulcanized Rubber and Thermoplastic Elastomers - Tension Standard Terminology Relatingto Plastic Piping Systems Standard Specification forCarbon Steel Chain Standard Test Method forAbsorption of Chemical- Resistant Mortars, Grouts, and Monolithic Surfacings Standard Test Methods forRubber Property - Adhesion to Flexible Substrate Classification for RatingSound Insulation R(1999) Standard Test Method forWorking, Setting, and Service Strength Setting Times of Chemically SettingChemicalResistant Silicate and Silica Mortars Standard Specification forHard-Drawn Aluminum-Clad Steel Wire Standard Specification forCast and Wrought Galvanic Zinc Anodes E1-2000 R(2000) Standard Test Method forAbrasion Resistance of Concrete by Sandblasting Standard Guide to SiteCharacterization for Engineering Design and Construction Purposes Standard Specification forUncoated Stress-Relieved Steel Wire for Prestressed Concrete AASHTO No.: M204

Standard Test Method forTumbling Friability of Preformed Block-Type Thermal Insulation Standard Practice for DryPreparation of Soil Samples for Particle-Size Analysis and Determination ofSoil Constants R(1998) Standard Specification forCopper-Aluminum-Silicon- Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy,Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum- Magnesiu Standard Test Method forParticle-Size Analysis of Soils R(1998) Standard Specification forSeamless and Electric- Welded Low-Alloy Steel Tubes R(2000)

Standard Test Method for SoundAbsorption and Sound Absorption Coefficients by the Reverberation Room Method Standard Specification forSteel, Sheet, for Porcelain Enameling Standard Specification forNi-Fe-Cr-Mo-Cu Alloy (UNS N08825 and UNS N08221) Plate, Sheet, and Strip Standard Test Methods forSolar Energy Transmittance and Reflectance (Terrestrial) of Sheet MaterialsE1- 1993 R(1993) Standard Specification forCompression Joints for Vitrified Clay Pipe and Fittings Standard Test Method forLinear Drying Shrinkage of Concrete Masonry Units Standard Practice for Electromagnetic(Eddy-Current) Examination of Seamless and Welded Tubular Products,Austenitic Stainless Steel and Similar Alloys Standard Specification forGear Bronze Alloy Castings Standard Test Method forWeight (Mass) of Coating on Aluminum-Coated Iron or Steel Articles Standard Test Method for Angleof Twist in Rectangular and Square Copper and Copper Alloy Tube E1 R(1998) Standard Practice forFabrication and Control of Steel Reference Blocks Used in UltrasonicExamination Standard Specification forAluminum-Alloy Extruded Structural Pipe and Tube Standard Test Method forParticle Size Distribution of Refractory Metal Powders and Related Compoundsby Turbidimetry Standard Test Methods forRubber Deterioration - Dynamic Fatigue R(2000) Standard Specification forSteel Bars, Alloy, Hot- Wrought or Cold-Finished, Quenched and TemperedR(2000) Standard Test Method forResistance to Slippage of Yarns in Woven Fabrics Using a Standard Seam Standard Specification forAustenitic Gray Iron Castings E1-1997 R(1997) Standard Specification forHardened Steel Washers R(2000) Standard Specification forHardened Steel Washers (Metric) R(2000) Standard Specification forThreaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings,Schedule 80 Standard Test Method forTransverse Testing of Gray Cast Iron R(1997) Standard Specification forSintered Bronze Bearings (Oil-Impregnated)

Standard Specification forGlasses in Laboratory Apparatus R(1996) Standard Specification forSocket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings,Schedule 40 Standard Specification forAustenitic Ductile Iron Castings R(1999) Standard Specification forIron-Base Sintered Bearings (Oil-Impregnated) Standard Specification forChlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Standard Specification forCopper-Cobalt-Beryllium (UNS No. C17500) and Copper-Nickel-Beryllium (UNS No.C17510) Rod and Bar

Standard Specification forChlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80 Standard Specification forGypsum Backing Board, Gypsum Coreboard, and Gypsum Shaftliner Board

Standard Specification forChlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) Standard Specification forNickel-Chromium-Molybdenum- Columbium Alloy (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Plate, Sheet, and Strip Standard Specification forJoints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets Standard Specification forJoints for Circular Concrete Sewer and Culvert Pipe, Using Rubber Gaskets(Metric) Standard Specification forNickel-Chromium-Molybdenum- Columbium Alloys (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube E1- 2001 Standard Specification forPerforated Concrete Pipe Standard Specification forPerforated Concrete Pipe (Metric) Standard Test Methods forChemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow) R(1999) Standard Specification forNickel-Chromium-Molybdenum- Columbium Alloy (UNS N06625) and NickelChromium-Molybdenum-Silicon Alloy (UNS N06219) Rod and Bar E1- 2001 Standard Specifications andOperating Instructions for Glass Capillary Kinematic Viscometers IPDesignation: 71S2/95 Standard Reference Radiographsfor Steel Castings up to 2 in. (51 mm) in Thickness Standard Consumer SafetySpecification for Grab Bars and Accessories Installed in the Bathing AreaR(1999) Standard Specification forWelded Copper Tube Standard Classification forSizes of Aggregate for Road and Bridge Construction Standard Specification forQuenched and Tempered Steel Bolts and Studs Standard Specification forChromates on Aluminum R(1998) Standard Specification forMineral Fiber Hydraulic- Setting Thermal Insulating and Finishing Cement Standard Specification forAsphalt Used in Dampproofing and Waterproofing E1 R(1999) Standard Test Methods forAnalysis of Calcium Chloride Standard Specification forGeneral Requirements for Carbon, Ferritic Alloy, and Austenitic Alloy SteelTubes

Standard Specification forCoal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing E1-2000R(2000) Standard Specification forCopper-Clad Steel Wire for Electronic Application E1-1998 R(1998) Standard Specification forHigh-Temperature Bolting Materials, with Expansion Coefficients Comparable toAustenitic Stainless Steels Standard Specification forCopper-Zinc-Lead Alloy (Leaded-Brass) Rod Standard Specification forCopper-Zinc-Lead Alloy (Leaded Brass) Rod (Metric) Standard Test Method for TarAcids in Creosote-Coal Tar Solutions E1-2000 R(2000) Standard Test Method forRubber Deterioration by Heat and Air Pressure

Standard Specification forElectrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel PlusChromium Standard Specification forCaustic Soda (Anhydrous) R(1997) Standard Terminology Relatingto Quality and Statistics Standard Test Method for Heatof Ablation E1-1996 R(1996) Standard Practice forNondestructive Pull Testing of Wire Bonds E1-1995 R(1995) Standard Test Methods forMeasuring Pull Strength of Microelectronic Wire Bonds E1-1995 R(1995) Standard Test Methods forSampling and Chemical Analysis of Soaps and Soap Products R(1997) Standard Test Methods for Felt Standard Specification forSteel Sheet, Aluminum- Coated, by the Hot-Dip Process Standard Specification for UNSN08020, UNS N08026, and UNS N08024 Alloy Plate, Sheet, and Strip Standard Specification forCopper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar Standard Test Methods for AcidNumber of Naval Stores Products Including Tall Oil and Other Related Products Standard Specification forWeldless Chain Standard Specification forSeamless Copper-Nickel Pipe and Tube Standard Specification forNonferrous Nuts for General Use Standard Specification forNonferrous Nuts for General Use (Metric) Standard Specification forNonferrous Bolts, Hex Cap Screws, and Studs for General Use Standard Specification forNonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric) Standard Specification forVacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts Standard Specification forMolds for Forming Concrete Test Cylinders Vertically Standard Test Methods forCrosslinked Insulations and Jackets for Wire and Cable Standard Test Method forRubber Property - Effect of Liquids E1-1999 Standard Specification for UNSN06030, UNS N06022, UNS N06200, UNS N08020, UNS N08026, UNS N08024, UNSN08926, UNS N08367, UNS N10276, UNS N10665, UNS N10675, and UNS Standard Test Methods forPhysical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete Standard Test Method forSediment in Crude Oils and Fuel Oils by the Extraction Method APIDesignation: Chapter 10-1 (MPMS); BSI 4382; IP Designation: 53/82; E1-1995; Standard Specification forZinc-Coated Steel Wire Strand Standard Specification forJoint Compound and Joint Tape for Finishing Gypsum Board Standard Specification forGeneral Requirements for Wrought Precious Metal Electrical Contact MaterialsE11995 R(1995) Standard Specification forGrout for Masonry Standard Classification forDry Pigmentary Titanium Dioxide Products Standard Test Methods forSecurity of Swinging Door Assemblies R(1996) Standard Specification forGold-Silver-Nickel Electrical Contact Alloy Standard Specification for ElastomericSeals (Gaskets) for Joining Plastic Pipe Standard Specification forChromium-Nickel Stainless Steel Weaving and Knitting Wire Standard Specification forPrecast Reinforced Concrete Manhole Sections

Standard Specification forPrecast Reinforced Concrete Manhole Sections (Metric) Standard Specification forZinc Yellow (Zinc Chromate) Pigments R(1997) Standard Test Methods forChemical Analysis of Copper Alloys R(1996) Standard Specification forStainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels Standard Specification forGeneral Requirements for Flat-Rolled Stainless and Heat-Resisting SteelPlate, Sheet, and Strip Standard Test Methods forSampling and Testing of Flaked Aluminum Powders and Pastes R(1999) Standard Specification forThermoplastic Well Casing Pipe and Couplings Made in Standard DimensionRatios (SDR), SCH 40 and SCH 80 Standard Test Method for LaboratoryAging of Sandwich Constructions Standard Test Method for Ashfrom Petroleum Products IP Designation: 4/96; British Standard 4450 Standard Specification forAluminum and Aluminum-Alloy Drawn Tubes for General Purpose Applications Standard Test Method for TotalImmersion Corrosion Test for Aircraft Maintenance Chemicals Standard Specification forGeneral Requirements for Stainless Steel Bars, Billets, and Forgings Standard Test Method forStress Crazing of Acrylic Plastics in Contact with Liquid or Semi-LiquidCompounds E1-1998 R(1998) Standard Specification forHigh Hardenability Antifriction Bearing Steel Standard Specification forSteel Castings Suitable for Pressure Service R(1998) Standard Test Method forMeasurement of Metal and Oxide Coating Thickness by Microscopical Examinationof a Cross Section R(1997) Standard Practice for SteelCastings, Welding, Qualifications of Procedures and Personnel Standard Specification forElectrodeposited Coatings of Gold for Engineering Uses Standard Test Methods forStrength of Anchors in Concrete and Masonry Elements Standard Specification forCarbon Steel Lifting Eyes Standard Specification forHeat-Treated Steel Structural Bolts, 150 ksi Minimum Tensile Strength AASHTONo.: M 253 Standard Specification forHigh-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural SteelJoints (Metric) AASHTO No.: M253M Standard Specification forRoad Tar R(1997) Standard Solar Constant andZero Air Mass Solar Spectral Irradiance Tables Standard Specification forAluminum and Aluminum-Alloy Extruded Round Tubes for GeneralPurposeApplications Standard Specification forStainless Steel Rope Wire R(2000) Standard Specification forStainless Steel Wire and Wire Rods for Cold Heading and Cold Forging R(2000) Standard Test Methods forLeaks Using the Mass Spectrometer Leak Detector in the Inside-Out TestingMode

Standard Specification forSolvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe andFittings Standard Specification forCastings, Nickel and Nickel Alloy Standard Specification forChemical Admixtures for Concrete

Standard Practice forMeasuring Ultrasonic Velocity in Materials Standard Test Method forCompressive Strength of Lightweight Insulating Concrete Standard Test Method forHigh-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation Standard Specification forSteel Wire, Deformed, for Concrete Reinforcement Standard Test Method forSplitting Tensile Strength of Cylindrical Concrete Specimens Standard Specification forSteel Welded Wire Fabric, Deformed, for Concrete Reinforcement Standard Test Methods forConcrete Pipe, Manhole Sections, or Tile Standard Test Methods forConcrete Pipe, Manhole Sections, or Tile (Metric) Standard Specification forPerforated Clay Drain Tile Standard Test Methods forLeaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer inthe Tracer Probe Mode R(2000) Standard Specification forSteel Bars and Shapes, Carbon Rolled from "T" Rails E1-1997 R(1997) Standard Test Method forMeasurement of Coating Thicknesses by the Magnetic Method: NonmagneticCoatings on Magnetic Basis Metals Standard Test Method forFacial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and FloorTile R(1999) Standard Test Methods forLeaks Using the Mass Spectrometer Leak Detector in the Detector Probe ModeR(2000) Standard Specification forSilver-Coated, Copper-Clad Steel Wire for Electronic Application Standard Test Methods ofSampling and Chemical Analysis of Alkaline Detergents R(1998) Standard Test Method forEffects of Cleaning and Chemical Maintenance Materials on Painted AircraftSurfaces E1 R(1998) Standard Test Method forMeasurement of Thickness of Metallic Coatings by the Coulometric MethodR(1997) Standard Specification forSteel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, GeneralRequirements for Standard Specification forCopper-Base Alloy Continuous Castings Standard Specification forAlloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled Standard Specification forReinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe Standard Specification forReinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) Standard Specification forDrawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled R(1998) Standard Specification forReinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe Standard Specification forReinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) Standard Specification forQuenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings forPressure Vessels R(1999)

Standard Specification forCopper Alloy Strip for Flexible Metal Hose Standard Specification forElastomeric Cellular Preformed Gasket and Sealing Material Standard Specification forGeneral Requirements for Wire Rods and Coarse Round Wire, Carbon Steel Standard Specification forGeneral Requirements for Wire Rods and Coarse Round Wire, Carbon Steel(Metric) Standard Test Method forResistance to Abrasion of Resilient Floor Coverings Using an Abrader with aGrit Feed Method R(1999) Standard Specification forSeamless Stainless Steel Mechanical Tubing Standard Test Methods forCalcium and Magnesium in Water R(1998) Standard Specification forCold-Drawn Buttweld Carbon Steel Mechanical Tubing Standard Test Methods forChloride Ion in Water R(1999) Standard Specification forElectric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing Standard Test Method forObtaining and Testing Specimens of Hardened Lightweight Insulating Concretefor Compressive Strength R(1995) Standard Specification forHigh-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable forWelding AASHTO No.: M244 Standard Specification forNails for the Application of Gypsum Board Standard Test Method for WaterPenetration and Leakage Through Masonry E1-1996; Supersedes C1389 R(1996) Standard Specification forPressure Vessel Plates, Carbon Steel, for Intermediate- andHigher-Temperature Service R(1997) Standard Specification forVermiculite Loose Fill Thermal Insulation E1-1996 R(1996) Standard Specification forPressure Vessel Plates, Alloy Steel, High-Strength, Quenched and TemperedR(1999) Standard Specification forAsphalt Plank Standard Test Method forPlastic Strain Ratio r for Sheet Metal Standard Specification forCorrosion-Resistant High- Silicon Iron Castings Standard Test Method forSteady-State Thermal Transmission Properties by Means of the Heat Flow MeterApparatus Standard Test Method forRubber Deterioration - Surface Cracking Standard Test Methods forFlexural Bond Strength of Masonry Standard Specification forSeamless Carbon and Alloy Steel Mechanical Tubing Standard Specification forTin-Coated, Copper-Clad Steel Wire for Electronic Application E1-1998 R(1998) Standard Test Methods forDensity of Granular Loose Fill Insulations Standard Specification forZinc Dust Pigment Standard Specification forGold-Silver-Platinum Electrical Contact Alloy E1-1995 R(1995) Standard Test Methods forMandrel Bend Test of Attached Organic Coatings Standard Test Method forSpecular Gloss R(1999)

Standard Test Method forRamsbottom Carbon Residue of Petroleum Products IP Designation: 14/94;British Standard 4451 Standard Test Method forOxidation Stability of Gasoline (Induction Period Method) IP Designation:40/97; British Standard 4347 Standard Test Method forMeasuring Dose for Use in Linear Accelerator Pulsed Radiation Effects Tests Standard Practice forNumbering Metals and Alloys (UNS) E1-1997 R(1997) Standard Specification forHigh-Strength Carbon- Manganese Steel of Structural Quality Standard Test Method forEnclosed Carbon-Arc Exposures of Bituminous Materials Standard Guide for ConductingFlexural Tests on Beams and Girders for Building Construction E1-1998 R(1998) Standard Specification forGeneral Requirements for Specialized Carbon and Alloy Steel Pipe E1-2000 Standard Test Method forMeasurement of Coating Thicknesses by the Magnetic Method: ElectrodepositedNickel Coatings on Magnetic and Nonmagnetic Substrates Standard Test Method forLinear Shrinkage and Coefficient of Thermal Expansion of ChemicalResistantMortars, Grouts, Monolithic Surfacings, and Polymer Concretes Standard Test Method forRubber Property - Pusey and Jones Indentation Standard Specification forAbrasion-Resistant Cast Irons E1-1999 R(1999)

Standard Specification forPressure Vessel Plates, Alloy Steel, Quenched and Tempered, ManganeseMolybdenum and Manganese-Molybdenum-Nickel R(1999) Standard Specification forCarburizing Steels for Anti- Friction Bearings Standard Specification for PreformedFlexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form Standard Test Method forResistance to Degradation of Large-Size Coarse Aggregate by Abrasion andImpact in the Los Angeles Machine E1-1996 Standard Specification forDuctile Iron Castings E1- 1999 R(1999) Standard Test Methods forChemical Analysis of Zinc and Zinc Alloys Standard Test Method for Sizeof Resilient Floor Tile by Dial Gage Method Standard Specification forPressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel R(2000) Standard Test Method forAssessing the Thermal Stability of Chemicals by Methods of Thermal Analysis Standard Specification forDesign, Fabrication, and Installation of Fences Constructed of Wood andRelated Materials Standard Specification forPalladium Electrical Contact Alloy Standard Specification forGold Electrical Contact Alloy Standard Specification forAlloy Steel Eyebolts Standard Specification forLock-Strip Gaskets R(1999) Standard Test Method for Indexof Refraction of Transparent Organic Plastics Standard Practice forCalibration of Laboratory Volumetric Apparatus Standard Specification forWelded Copper and Copper- Alloy Heat Exchanger Tube Standard Practices forEvaluating the Resistance of Plastics to Chemical Reagents

Standard Practice for AgenciesPerforming Nondestructive Testing Standard Specification forElectrodeposited Coatings of Tin E1-2001 Standard Test Methods forPreformed Expansion Joint Fillers for Concrete Construction (Nonextruding andResilient Types) Standard Test Method forDetermining Image Quality in Direct Thermal Neutron Radiographic Examination Standard Test Method for SieveAnalysis of Mineral Filler for Road and Paving Materials AASHTO No.: T 37;E1-1999 Standard Test Method for FrostPoint of Sealed Insulating Glass Units E1-1999 R(1999) Standard Specification forAluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube Standard Specification forMineral Fiber Pipe Insulation Standard Specification forPerlite Loose Fill Insulation E1-1995 R(1995) Standard Test Method forMeasuring Trueness and Squareness of Rigid Block and Board Thermal Insulation Standard Specification forCellular Glass Thermal Insulation Standard Terminology Relatingto Chain Link Fencing Specification for MineralFiber Blanket Thermal Insulation for Commercial and Industrial Applications Standard Specification forWelded Stainless Steel Mechanical Tubing E1-1999 Standard Specification forGeneral Requirements for Stainless Steel Wire and Wire Rods Standard Guide for TestingDrying Oils R(1998) Standard Test Methods ofTension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products Standard Test Methods ofTension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products(Metric) Standard Specification forAdhesives for Fastening Gypsum Wallboard to Wood Framing Standard Practice forArchitectural Application and Installation of Operable Partitions Standard Test Methods forMoisture-Density Relations of Soil-Cement Mixtures Standard Specification forNickel-Coated, Copper-Clad Steel Wire for Electronic Application E1-1998R(1998) Standard Test Methods forWetting and Drying Compacted Soil-Cement Mixtures Standard Test Methods forFreezing and Thawing Compacted Soil-Cement Mixtures Standard Specification forUnalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400) Standard Practice forMacroetch Testing of Tool Steel Bars R(1999) Standard Test Method for Ashin a Graphite Sample R(2000) Standard Test Method forMoisture in a Graphite Sample R(2000) Standard Specification forCarbon and Alloy Steel Nuts Standard Specification forCarbon and Alloy Steel Nuts (Metric) Standard Specification forPalladium-Silver-Copper Electrical Contact Alloy Standard Test Method forPhthalic Anhydride Content of Alkyd Resins and Resin Solutions E1-1996R(1996) Standard Specification forHot-Rolled and Cold- Finished Age-Hardening Stainless Steel Bars and Shapes Standard Specification forNickel Alloy Forgings

Standard Specification forRubber Gaskets for Cast Iron Soil Pipe and Fittings Standard Test Methods forLiquid Paint Driers R(1996) Standard Specification forMartensitic Stainless Steel Bars, Forgings, and Forging Stock forHigh-Temperature Service Standard Test Method for ShearTesting of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and RodsR(2000) Standard Test Method forCarbonizable Substances in White Mineral Oil Standard Specification forCopper-Clad Aluminum Wire E1-1998 R(1998) Standard Test Method for TotalEvaporable Moisture Content of Aggregate by Drying Standard Test Method forDropping Point of Lubricating Grease IP Designation: 132/97 Standard Test Method forMeasurement of Coating Thickness by the Beta Backscatter Method Standard Test Method forDetermining Density of Structural Lightweight Concrete Standard Specification forSteel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled andCold-Rolled, General Requirements for Standard Test Method forMeasurement of Coating Thickness by X-Ray Spectrometry Standard Specification forLimestone Dimension Stone Standard Specification forCarbon and Alloy Steel Externally Threaded Metric Fasteners Standard Specification forCarbon and Alloy Steel Externally Threaded Metric Fasteners Standard Specification forStructural Steel, Sheet and Strip, Carbon, Hot-Rolled Standard Specification forOil- and Resin-Base Caulking Compound for Building Construction Standard Test Method for WaterAbsorption of Plastics Standard Practice for FluxLeakage Examination of Ferromagnetic Steel Tubular Products Standard Practice forQualitative Adhesion Testing of Metallic Coatings E1-2000 Standard Test Method forRubber - Deterioration by Heat and Oxygen Standard Test Method forRubber - Deterioration in an Air Oven Standard Specification forAlloy Steel Socket-Head Cap Screws Standard Specification forAlloy Steel Socket-Head Cap Screws (Metric) Standard Specification forLow-Carbon Nickel- Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, Low-Carbon Nickel-Molybdenum-Chromium- Tantalum, Low-Carbon Standard Specification forSteel Bars, Carbon, Merchant Quality, M-Grades Standard Specification forLow-Carbon Nickel- Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, and Low-Carbon Nickel-Chromium-Molybdenum- Copper, Low-Carb Standard Test Methods forRubber Properties in Compression R(1996) Standard Specification forSteel Bars, Carbon, Hot- Wrought, Special Quality R(2000) Standard Test Method for FrostPoint of Sealed Insulating Glass Units in the Vertical Position E1- 2000R(1999) Standard Test Methods for Detectionof Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper R(1998) Standard Guide for DimensionalCoordination of Rectilinear Building Parts and Systems R(1999) Standard Specification forStraight-Beam Ultrasonic Examination of Plain and Clad Steel Plates forSpecial Applications

Standard Test Method forMicrohardness of Electroplated Coatings R(1999) Standard Specification forRigid, Cellular Polystyrene Thermal Insulation Standard Specification forGlass Fiber Strands Standard Specification forSuperstrength Alloy Steel Forgings Standard Specification forElectrodeposited Coatings of Tin-Lead Alloy (Solder Plate) R(1999) Standard Specification forGreige Woven Glass Fabrics Standard Specification forStainless Steel Wire Standard Specification forAnodic Oxide Coatings on Aluminum R(2000) Standard Test Method forFlexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars,Grouts, Monolithic Surfacings, and Polymer Concretes Standard Practice forApplication of Ceiling Suspension Systems for Acoustical Tile and Lay-InPanels in Areas Requiring Seismic Restraint Standard Specification forFree-Machining Stainless Steel Wire and Wire Rods R(2000)

Standard Practice forDetermining Chemical Resistance of Thermosetting Resins Used inGlass-FiberReinforced Structures Intended for Liquid Service Standard Specification forFree-Machining Stainless Steel Bars R(2000)

Standard Specification forContact-Molded Reinforced Thermosetting Plastic (RTP) Laminates forCorrosionResistant Equipment Standard Specification forCopper Alloy Sand Castings for General Applications Standard Practice for Samplingand Accepting a Single Lot of Paper, Paperboard, Fiberboard, and RelatedProduct Standard Practice forInsertion of Flexible Polyethylene Pipe into Existing Sewers R(2000) Standard Specification forZinc-Coated Parallel and Helical Steel Wire Structural Strand and Zinc-CoatedWire for Spun-In-Place Structural Strand Standard Test Method forPotential Alkali Reactivity of Carbonate Rocks for Concrete Aggregates (RockCylinder Method) Standard Specification forGypsum Veneer Plaster Standard Specification forHigh-Strength Low-Alloy Structural Steel with 50 ksi (345 MPa) Minimum YieldPoint to 4-in. (100-mm) Thick AASHTO No.: M 222 Standard Specification forGypsum Base for Veneer Plasters Standard Specification forSeamless and Welded Carbon Steel Water-Well Pipe Standard Test Method for PetroleumWax in Paper R(1997) Standard Specification forSteel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight (Mass)Applications Standard Specification forCopper-Zinc-Tin and Copper- Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip,and Rolled Bar Standard Specification forUnfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

Standard Specification forMineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type) Standard Test Method forBending Fatigue Testing for Copper-Alloy Spring Materials Standard Specification forStainless Steel Bolts, Hex Cap Screws, and Studs Standard Practice for UltrasonicInspection of Aluminum-Alloy Wrought Products for Aerospace Applications Standard Specification forStainless Steel Nuts Standard Specification forSteel Tubes, Low-Carbon, Tapered for Structural Use Standard Specification forBlended Hydraulic Cements E1-2000 Standard Specification forTetrasodium Pyrophosphate (Anhydrous) R(1997) Standard Test Method for TotalMass Loss and Collected Volatile Condensable Materials from Outgassing in aVacuum Environment R(1999) Standard Specification forGold-Copper Alloy Electrical Contact Material R(1999) Standard Test Method forLaboratory Measurement of Noise Reduction of Sound-Isolating Enclosures Standard Specification forCast Tool Steel R(1999) Standard Practice for HeatTreatment of Aluminum Alloys R(1998) Standard Test Method for PulseVelocity Through Concrete Standard Practice forDetermining Offset Yield Strength in Tension for Copper Alloys Standard Specification forTool Steel High Speed R(1999) Standard Guide for Descalingand Cleaning Titanium and Titanium Alloy Surfaces E1-1997 R(1997) Standard Specification forLiquid Paint Driers R(1997) Standard Practice for TemperDesignations for Copper and Copper Alloys - Wrought and Cast Standard Specification forAgricultural Liming Materials Standard Test Method forSharp-Notch Tension Testing with Cylindrical Specimens R(1997) Standard Specification forZinc-Coated Steel Structural Wire Rope Standard Test Method forExtrusion Rate and Application Life of Elastomeric Sealants E1-1997 R(1997) Standard Test Method forMacroetch Testing of Consumable Electrode Remelted Steel Bars and BilletsR(1998) Standard Specification forDiatomaceous Silica Pigment E1-1996 R(1996) Standard Test Method forDynamic Tear Testing of Metallic Materials R(1994) Standard Test Methods forThickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied toStructural Members R(2000) Standard Specification forSteel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled,with Improved Atmospheric Corrosion Resistance Standard Test Methods forDetermining the Mechanical Properties of Externally and Internally ThreadedFasteners, Washers, and Rivets Standard Test Methods forDetermining the Mechanical Properties of Externally and Internally ThreadedFasteners, Washers, and Rivets (Metric) Standard Specification forSteel, Sheet and Strip, High-Strength, Low-Alloy, Columbium or Vanadium, orBoth, Hot-Rolled and Cold-Rolled

Standard Specification forAutocatalytic Nickel Boron Coatings for Engineering Use R(1998) Standard Specification for WetGround Mica Pigments R(1999) Standard Test Method forOptical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys bythe Point-To-Plane Technique, Nitrogen Atmosphere R(1996) Standard Test Method forAdhesion of Gasket Materials to Metal Surfaces Standard Practice forCastings, Carbon, Low-Alloy, and Martensitic Stainless Steel, UltrasonicExamination Thereof R(1997) Standard Specification forAluminum 1350 Round Wire, Annealed and Intermediate Tempers, for ElectricalPurposes Standard Practice forPreparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, ConversionCoatings, and Related Coating Products Standard Specification forMolded Expanded Perlite Block and Pipe Thermal Insulation Standard Test Method forEvaluating Degree of Rusting on Painted Steel Surfaces Standard Specification forStructural Steel (SS), Sheet, Carbon, Cold-Rolled Standard Test Methods forAniline Point and Mixed Aniline Point of Petroleum Products and HydrocarbonSolvents IP Designation: 2/98 R(1998) Standard Specification forMineral Fiber Block and Board Thermal Insulation Standard Test Method forCarbonizable Substances in Paraffin Wax R(1999) Standard Test Method forConstituent Content of Composite Prepreg by Soxhlet Extraction Standard Test Method forCetane Number of Diesel Fuel Oil IP Designation: 41/99 Standard Specification forGranite Dimension Stone Standard Specification forQuartz-Based Dimension Stone Standard Specification forCoin Silver Electrical Contact Alloy Standard Practice for CappingCylindrical Concrete Specimens Standard Test Method forPunching Quality of Phenolic Laminated Sheets R(1998) Standard Specification forCoal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a MineralAdmixture in Concrete Standard Practice forConditioning Plastics for Testing Standard Practice forEvaluating Foreign Odors in Paper Packaging R(1995) Standard Specification forDrawing Steel (DS), Sheet, Carbon, Cold-Rolled Standard Practice for Use ofMetric (SI) Units in Building Design and Construction (Committee E-6Supplement to E380) E1-1999 R(1999) Standard Specification forDrawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled Standard Test Methods forRubber Hose for Automotive Air and Vacuum Brake System Standard Specification for TinMill Products, General Requirements Standard Specification for TinMill Products, General Requirements (Metric) Standard PerformanceSpecification for Foley Catheter Standard Specification for TinMill Products, Electrolytic Tin Plate, Single Reduced Standard Specification forHigh-Strength, High- Conductivity Copper-Alloy Wire for ElectronicApplication

Standard Test Method for TearStrength of Conventional Vulcanized Rubber and Thermoplastic ElastomersE12001 Standard Specification for TinMill Products, Black Plate, Single-Reduced Standard Specification for TinMill Products, Electrolytic Tin Plate, Double Reduced Standard Specification forHomogeneous Tool-Resisting Steel Bars for Security Applications Standard Specification forSilver-Copper Eutectic Electrical Contact Alloy Standard Specification forSlate Dimension Stone Standard Test Methods forQuantitative Analysis of Textiles Standard Test Methods forDetermination of Tin Coating Weights for Electrolytic Tin Plate Standard Specification forWater-Resistant Gypsum Backing Board Standard Specification forNormalized High-Strength Low-Alloy Structural Steel Plates

Standard Test Method forAdhesion or Cohesive Strength of Flame-Sprayed Coatings R(1999) Standard Volume CorrectionTable for Road Tar Standard Specification forSteel, Sheet and Strip, Heavy-Thickness Coils, Carbon, Hot-Rolled Standard Specification for theManufacture, Performance, and Testing of Metal Suspension Systems forAcoustical Tile and Lay-In Panel Ceilings Standard Test Method for Rateof Burning and/or Extent and Time of Burning of Plastics in a HorizontalPosition Standard Practice forInstallation of Metal Ceiling Suspension Systems for Acoustical Tile andLay-In Panels Standard Specification forPrecipitation-Hardening Nickel Alloy Bars, Forgings, and Forging Stock forHighTemperature Service Standard Specification for SAggregates for Radiation- Shielding Concrete Standard DescriptiveNomenclature of Constituents of Aggregates for Radiation-Shielding ConcreteR(1997) Standard Test Method forTensile Properties of Plastics Standard Test Method forTensile Properties of Plastics (Metric) Standard Test Method forRheological (Flow) Properties of Elastomeric Sealants Standard Specification forWelded Copper Tube for Air Conditioning and Refrigeration Service Standard Test Methods forRadiopacity of Plastics for Medical Use R(2000) Standard Specification forZinc-Coated (Galvanized) Carbon Steel Wire Standard Test Method forStaining Materials in Lightweight Concrete Aggregates E1 Standard Test Method forDetermining Compressive Resistance of Shipping Containers, Components, andUnit Loads Standard Specification forCopper-Beryllium Alloy Seamless Tube Standard Terminology Relatingto Iron Castings Standard Specification forCopper Alloy Addition Agents Standard Test Method forMoisture Content of Paper and Paperboard by Oven Drying

Standard Practice forPlane-Strain Fracture Toughness Testing of Aluminum Alloys Standard Specification forNonstructural Steel Framing Members Standard Practice for FractureToughness Testing of Aluminum Alloys Standard Test Method forGrammage of Paper and Paperboard (Mass per Unit Area) TAPPI T 410 om-88 Standard Test Method forDeflection Temperature of Plastics under Flexural Load in the EdgewisePosition Standard Test Method forCritical Radiant Flux of Floor-Covering Systems Using a Radiant Heat EnergySource Standard Specification forElectrodeposited Engineering Chromium Coatings on Ferrous Substrates Standard Test Method forFlexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature R(2000) Standard Terminology Relatingto Soil, Rock, and Contained Fluids R(2000) Standard Specification forPorous Concrete Pipe Standard Specification forPorous Concrete Pipe (Metric) Standard Specification forReinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe Standard Specification forReinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) Standard Specification forChemical-Resistant Resin Grouts for Brick or Tile Standard Specification forCommercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 MaximumPercent), Hot-Rolled Standard Practices for Packaging/Packingof Aluminum and Magnesium Products Standard Test Method forEvaluating Degree of Checking of Exterior Paints R(2000) Standard Practice for HeatTreatment of Magnesium Alloys Standard Test Method forIndentation Hardness of Elastomeric-Type Sealants by Means of a Durometer Standard Test Method forEvaluating Degree of Cracking of Exterior Paints R(2000) Standard Test Method forEvaluating Degree of Erosion of Exterior Paints R(2000) Standard Test Method forSpecific Optical Density of Smoke Generated by Solid Materials Standard Specification forSteel Bars, Carbon, Merchant Quality, Mechanical Properties R(2000) Standard Specification forSilver-Tungsten Carbide Electrical Contact Material R(2000) Standard Specification forAsbestos-Cement Storm Drain Pipe Standard Specification forMineral-Fiber Blanket Thermal Insulation for Light Frame Construction andManufactured Housing Standard Test Method forRust-Preventing Characteristics of Inhibited Mineral Oil in the Presence ofWater IP Designation: 135/93 Standard Practice for UsingAbsorbed Dose Versus Depth in Materials to Verify the X-Ray Output of FlashXRay Machines Standard Specification forAnnealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, andFlat Bar Standard Practice forIdentification Marking of Aluminum and Magnesium Products E1-1997 Standard Test Method forResistance of Concrete to Rapid Freezing and Thawing Standard Practice forCalculating Absorbed Dose from Gamma or X Radiation Standard Specification forCentrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders R(1998)

Standard Specification forMercury-In-Glass, Maximum Self-Registering, Clinical Thermometers Standard Specification forSteel Forgings, Carbon and Alloy, for General Industrial Use E1; AASHTO No.:M 102 Standard Practice forApplication of Thermoluminescence-Dosimetry (TLD) Systems for DeterminingAbsorbed Dose in Radiation-Hardness Testing of Electronic Devices Standard Specification forGlazing Compounds for Back Bedding and Face Glazing of Metal Sash Standard Specification forPrecipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip forHighTemperature Service Standard Practice forPreparing Precision and Bias Statements for Test Methods for ConstructionMaterials Standard Specification forTanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing E1-1994 R(1994) Standard Test Method forFlexural Fatigue of Plastics by Constant-Amplitude-Of-Force Standard Specification forMaximum Permissible Thermal Residual Stress in Annealed Glass LaboratoryApparatus Standard Specification forDisposable Glass Micropipets E1-1992 R(1996) Standard Specification forSampling Procedure for Impact Testing of Structural Steel AASHTO No.: T 243 Standard Specification forSteel Bars, Carbon, Hot- Wrought, Special Quality, Mechanical PropertiesR(2000)

Standard Specification forInterchangeable Taper- Ground Stopcocks and Stoppers R(1998) Standard Test Method forTack-Free Time of Elastomeric Sealants E1-1997 R(1997) Standard Specification forTool Steels Alloy R(1999) Standard Practice for Use ofBranch Connections R(1998) Standard Specification forSteel, Strip, High-Carbon, Cold-Rolled, General Requirements for Standard Practice for LiquidChromatography Terms and Relationships R(2000) Standard Specification forWrought Carbon Steel Sleeve- Type Pipe Couplings R(1998) Standard Specification forPure Palladium Electrical Contact Material E1-1995 R(1995) Standard Practice forSelection and Application of Thermal Insulation for Piping and Machinery Standard Specification forSteel, Strip, High-Carbon, Cold-Rolled R(1998) Standard Specification forPlatinum-Iridium Electrical Contact Materials Standard Specification forPalladium-Copper Electrical Contact Material E1-1995 R(1995) Standard Specification forConcrete Made by Volumetric Batching and Continuous Mixing

Standard Practice forConditioning Paper and Paper Products for Testing TAPPI T 402 R(1998) Standard Specification forTool Steel, Carbon R(1999) Standard Specification forBrass, Copper, and Chromium- Plated Pipe Nipples Standard Specification forElectroplated Engineering Nickel Coatings Standard Test Method forInternal Tearing Resistance of Paper

Standard Specification forHigh-Strength Low-Alloy Steel H-Piles and Sheet Piling for Use in MarineEnvironments Standard Practice forConducting an Interlaboratory Study to Determine the Precision of a TestMethod Standard Specification forCoarse Aggregate for Bituminous Paving Mixtures Standard Specification forPrecipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, andStrip R(1999) Standard Specification for CrushedAggregate for Macadam Pavements Standard Specification forLaboratory Glass Volumetric Apparatus Standard Specification forSteel Bars, Carbon, Hot- Wrought, Special Quality, for Fluid PowerApplications E11995 R(1995) Standard Specification forCoatings of Zinc Mechanically Deposited on Iron and Steel Standard Test Method forCompressive Strength of Carbon and Graphite R(2000) Standard Test Method forCompressive Properties of Rigid Plastics Standard Specification forSteel Bars, Carbon, Hot- Wrought or Cold-Finished, Special Quality, forPressure Piping Components R(2000) Standard Specification forCoatings of Cadmium Mechanically Deposited Standard Test Method forCoefficient of Linear Thermal Expansion of Plastics between -30 Degrees C and30 Degrees C with Vitreous Silica Dilatometer Standard Specification forLeather Protectors for Rubber Insulating Gloves and Mittens Standard Test Methods forLaboratory Compaction Characteristics of Soil Using Standard Effort (12,400ftlbf/ft3 (600 kN-m/m3)) Standard Practices forPackaging, Marking, and Loading Methods for Steel Products for DomesticShipment E12000 Standard Specification forVitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated Standard Specification forSteel Fence Posts and Assemblies, Hot Wrought R(2000) Standard Practice for ReducingSamples of Aggregate to Testing Size AASHTO T248 Standard Specification forSteel Castings, General Requirements, for Pressure-Containing Parts Standard Specification forMelamine-Formaldehyde Molding Compounds Standard Practice forSelecting Bolting Lengths for Piping System Flanged Joints E1-1996 R(1996) Standard Specification forLow-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement Standard Specification forCellulose Acetate Molding and Extrusion Compounds Standard Specification forCellulose Acetate Butyrate Molding and Extrusion Compounds Standard Specification forModular Gage Boards Standard Practice for Designand Installation of Rigid Pipe Hangers R(1997) Standard Specification forLaminated Thermosetting Materials Standard Guide for MagneticParticle Examination Standard Specification forAge-Hardening Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium AlloyStructural Steel Plates Standard Specification forVulcanized Fibre Sheets, Rods, and Tubes Used for Electrical Insulation Standard Specification forSteel Forging Stock E1-1997 R(1996)

Standard Test Method forNo-Pick-Up Time of Traffic Paint R(1998) Standard Guide for Selectionof Scales for Metric Building Drawings E1-1999 R(1999) Standard Test Method forEvaluating Degree of Blistering of Paints R(2000) Standard Specification forSteel Sheet and Strip, High- Strength, Low-Alloy, Hot-Rolled, and SteelSheet, ColdRolled, High-Strength, Low-Alloy, with Improved Formab Standard for Shipbuilders andMarine Paints and Coatings Product/Procedure Data Sheet Standard Test Method forAdhesion and Cohesion of Elastomeric Joint Sealants under Cyclic Movement(Hockman Cycle) R(1998) Standard Test Method forFree-Swelling Index of Coal R(1999) Standard Guide for Selectionand Use of Neutron- Activation Foils for Determining Neutron Spectra Employedin Radiation-Hardness Testing of Electronics Standard Test Method forAverage Particle Size of Alumina and Silica Powders by Air PermeabilityE1-1997 R(1997) Standard Test Method for OilContent of Petroleum Waxes IP Designation: 158/69(85) Standard Guide for DeterminingNeutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing ofElectronics Standard Specification forGage Piping Assemblies R(1998) Standard Practice forCharacterizing Neutron Energy Fluence Spectra in Terms of an EquivalentMonoenergetic Neutron Fluence for Radiation-Hardness Testing of Electron Standard Test Method for SurfaceWettability of Paper (Angle-Of-Contact Method) Standard Specification forSemidense Mineral Fiber Siding R(1998) Standard Specification forMineral Fiber Roof Insulation Board Standard Test Method forResistance of Nonporous Paper to Passage of Air R(1999) Standard Test Method forSorbent Performance of Adsorbents Standard Specification forPerlite Thermal Insulation Board Standard Specification for 60%Palladium-40% Silver Electrical Contact Material Standard Test Method for AgingEffects of Artificial Weathering on Latex Sealants Standard Test Method for ShearStrength of Plastics by Punch Tool Standard Specification forDisposable Pasteur-Type Pipet R(1996) Standard Specification forWelded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples Standard Specification forAutocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal Standard Test Method forCohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to StructuralMembers Standard Specification forStainless Steel Metric Bolts, Screws, and Studs Standard Specification forStainless Steel Metric Bolts, Screws, and Studs Standard Specification forSteel Bars, Alloy, Hot- Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both R(2000) Standard Specification forCellulosic Fiber (Wood- Base) Loose-Fill Thermal Insulation Standard Specification forHardware Cloth (Woven or Welded Galvanized Steel Wire Fabric) Standard Specification forCopper-Nickel-Tin Spinodal Alloy Strip Standard Specification forSteel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel PipeAASHTO No.: M 246/M 246M Standard Specification forFine Silver Electrical Contact Fabricated Material R(2000)

Standard Specification forCastings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, forGeneral Application E1-1999 Standard Specification forCastings, Iron-Chromium- Nickel, Corrosion Resistant, for Severe Service Standard Specification forPrefaced Concrete and Calcium Silicate Masonry Units Standard Test Method forMeasuring Dose Rate Threshold for Upset of Digital Intergrated Circuits(Metric) Standard Specification forCorrugated Aluminum Pipe for Sewers and Drains Standard Specification forDuctile Iron Gravity Sewer Pipe Standard Specification forCorrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe,Pipe-Arches, and Arches R(2000) Standard Test Method forApparent Bending Modulus of Plastics by Means of a Cantilever Beam Standard Specification forSteel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, GeneralRequirements for Standard Test Methods,Practices, and Terminology for Chemical Analysis of Steel Products Standard Test Methods forCoated Fabrics Standard Specification forInstallation of Steel Framing Members to Receive Screw-Attached Gypsum PanelProducts Standard Specification forSteel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by theCoilCoating Process for Exterior Exposed Building Products Standard Test Method forMeasuring Vibration-Damping Properties of Materials Standard Specification forSteel Castings, Ferritic and Martensitic, for Pressure-Containing and OtherApplications, for Low-Temperature Service Standard Specification forSmooth-Wall Poly (Vinyl Chloride)(PVC) Plastic Underdrain Systems forHighway, Airport, and Similar Drainage R(2000) Standard Specification forCarbon Steel Crane Rails Standard Test Method forEffect of Deflection on Sprayed Fire-Resistive Material Applied to StructuralMembers R(2000) Standard Specification forCorrugated Steel Pipe, Metallic-Coated for Sewers and Drains AASHTO No.:M36/M36M Standard Test Method forEffect of Impact on Bonding of Sprayed Fire-Resistive Material Applied toStructural Members R(2000) Standard Specification forCorrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches AASHTO No.: M167/M167M Standard Test Method forCompressive Strength of Sprayed Fire-Resistive Material Applied to StructuralMembers R(2000) Standard Specification forCorrugated Steel Pipe, Polymer Precoated for Sewers and Drains AASHTO No.M245/M245M Standard Specification forCopper Alloy Sand Castings for Valve Application Standard Specification forMetallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size forMechanical Springs R(2001) Standard Specification forMineral Fiber Loose-Fill Thermal Insulation Standard Specification forWildcats, Ship Anchor Chain R(1998)

Standard Specification forElectrodeposited Coatings of Cadmium R(1998) Standard Specification forZinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

Standard Specification forVacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors andShafts Standard Specification forCopper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip andSheet Standard Specification forThrough-Thickness Tension Testing of Steel Plates for Special ApplicationsR(1996) Standard Specification forCopper-Beryllium Alloy Sand Castings for General Applications Standard Test Method forEvaluating Degree of Flaking (Scaling) of Exterior Paints R(2000) Standard Practice forMeasuring Dose Rate Response of Linear Integrated Circuits (Metric) Standard Test Method forBursting Strength of Paper Standard Specification for theClassification of the Durability of Sealed Insulating Glass Units Standard Specification forStandard Sand Standard Test Method for WaterResistance of Paper, Paperboard, and Other Sheet Materials by the DryIndicator Method R(1998) Standard Practice for Repairof Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings Standard Specification for 75% Silver, 24.5 % Copper, 0.5 % Nickel Electrical Contact Alloy Standard Test Method forPreconstruction and Construction Evaluation of Mortars for Plain and ReinforcedUnit Masonry Standard Specification forIron Graphite Sintered Bearings (Oil-Impregnated) Standard Specification forDoors, Furniture, Marine Standard Specification forStaple, Handgrab, Handle, and Stirrup Rung R(1998) Standard Test Method forRockwell Hardness of Plastics and Electrical Insulating Materials Standard Specification forCrucibles, Ignition, Laboratory, Metal E1-1997 R(1996) Standard Specification forHot-Rolled Carbon, Low- Alloy, High-Strength Low-Alloy, and Alloy Steel FloorPlates Standard Specification forDishes, Evaporating, Platinum E1-1997 R(1996) Standard Specification forEthyl Cellulose Molding and Extrusion Compounds Standard Specification forDisposable Glass Micro Blood Collection Pipets R(1996) Standard Specification forSteel Forgings, General Requirements Standard Practice forInstalling Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe Standard Classification Systemfor Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds Standard Specification forPipet, Blood Diluting Standard Specification for SurfaceDiscontinuities of Bolts, Screws, and Studs, Inch and Metric Series Standard Test Methods forFlexural Properties of Unreinforced and Reinforced Plastics and ElectricalInsulating Materials

Standard Test Method forStress Crazing of Transparent Plastics Standard Specification forSteel Sheet, 55% Aluminum- Zinc Alloy-Coated by the Hot-Dip Process Standard Test Method forEffects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric SealantsR(1998) Standard Test Methods forDensity and Specific Gravity (Relative Density) of Plastics by Displacement Standard Specification forRolled Floor Plate, Stainless Steel Standard Test Method forEffects of Accelerated Weathering on Elastomeric Joint Sealants E1-1997R(1997) Standard Specification forCommercial Steel (CS), Sheet, Carbon (0.16% Maximum to 0.25% Maximum), Cold-Rolled Standard Specification forPoly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based onControlled Inside Diameter Standard Specification forThermal Insulation for Use in Contact with Austenitic Stainless Steel E11998R(1998) Standard Practices forMounting Test Specimens During Sound Absorption Tests Standard Practice forStructural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Stormand Sanitary Sewers and Other Buried Applications Standard Test Method forFoaming Agents for Use in Producing Cellular Concrete Using Preformed Foam Standard Practice forInstalling Factory-Made Corrugated Steel Pipe for Sewers and OtherApplications

Standard Specification forGlass Fiber Blanket Insulation (Aircraft Type) Standard Test Methods ofChemical Analysis of Industrial Metal Cleaning Compositions R(1997) Standard Guide for Measurementof Gases Present or Generated During Fires Standard Practice forControlling Quality of Radiological Examination of Electronic Devices E1-1995R(1995) Standard Test Method forMeasuring Optical Angular Deviation of Transparent Parts Standard Specification forSteel, Flat Wire, Carbon, Cold-Rolled R(1998) Standard Test Method for ReboundNumber of Hardened Concrete Standard Specification forCopper Alloy Permanent Mold Castings for General Applications Standard Test Method forChlorine in New and Used Petroleum Products (Bomb Method) Standard Specification forAluminum-Coated (Aluminized) Carbon Steel Wire Standard Practice for SurfacePreparation of Concrete for Application of Chemical-Resistant ResinMonolithic Surfacings Standard Test Method for CrackStrength of Slow-Bend Precracked Charpy Specimens of High-Strength MetallicMaterials R(1997) Standard Specification forSurface Discontinuities of Nuts, Inch and Metric Series Standard Test Method forRubber Deterioration - Crack Growth R(2000) Standard Test Method for FireTests of Through- Penetration Fire Stops Standard Test Method forSpecific Optical Density of Smoke Generated by Solid Materials for AerospaceApplications

Standard Test Method forSulfur in Graphite by Combustion-Iodometric Titration Method E1-1998 R(1998) Standard Specification forCoppered Carbon Steel Wire E1-1996 R(1996) Standard Terminology Relatingto Concrete Pipe and Related Products E1-1999 Standard Practice forConducting Tests on Paint and Related Coatings and Materials Using FilteredOpen- Flame Carbon-Arc Exposure Apparatus Standard Practice forDetermining Resistance of Solar Collector Covers to Hail by Impact withPropelled Ice Balls R(1996) Standard Practice forExamination and Sampling of Hardened Concrete in Constructions Standard Practices forProducing Films of Uniform Thickness of Paint, Varnish, and Related Productson Test Panels Standard Specification forGeneral Requirements for Copper Alloy Castings Standard Specification forPhase Change-Type Disposable Fever Thermometer for Intermittent Determinationof Human Temperature Standard Specification forPlates, Carbon Steel, for Forging and Similar Applications R(1998)

Standard Test Method forChange in Height at Early Ages of Cylindrical Specimens from CementitiousMixtures E1-1997 R(1997) Standard Test Method for Low-PressureAir Test of Vitrified Clay Pipe Lines Standard Test Method forTensile Properties of Paper and Paperboard Using Constant-Rate-OfElongationApparatus Standard Specification forAlloy Structural Steel Plates Standard Practice for RubberConditioning for Low- Temperature Testing R(1997) Standard Specification forLatex Sealants E1-2001 Standard Guide for ModularCoordination of Clay and Concrete Masonary Units R(1999) Standard Specification forAlloy Steel Socket Button and Flat Countersunk Head Cap Screws Standard Specification forAlloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) Standard Specification forHigh Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membranefor Use with Separate Wearing Course Standard Specification forStainless Steel Metric Nuts Standard Specification forStyle 1 Stainless Steel Metric Nuts Standard Specification forStainless Steel Socket Head Cap Screws Standard Specification forStainless Steel Socket Head Cap Screws (Metric) Standard Specification forInstallation of Interior Lathing and Furring Standard Specification forThrusters, Tunnel, Permanently Installed in Marine Vessels R(1998) Standard Test Methods forMeasuring the Forced Entry Resistance of Sliding Door Assemblies, ExcludingGlazing Impact Standard Specification forApplication of Gypsum Veneer Plaster Standard Specification forApplication of Gypsum Base to Receive Gypsum Veneer Plaster Standard Specification forWashers, Steel, Plain (Flat), Unhardened for General Use Standard Specification forMetal Lath R(2000)

Standard Test Method forAcidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and SimilarIndustrial Aromatic Hydrocarbons R(2000) Standard Test Method for AcidWash Color of Industrial Aromatic Hydrocarbons Standard Specification forPost-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer andDrainage Pipe Standard Test Method forCopper Strip Corrosion by Industrial Aromatic Hydrocarbons Standard Test Method forDistillation of Industrial Aromatic Hydrocarbons and Related Materials Standard Specification forSteel Wire, Carbon, for General Use R(1998) Standard Test Method forHydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of IndustrialAromatic Hydrocarbons Standard Test Methods forSpecific Gravity of Soil Solids by Water Pycnometer Standard Practice forMechanical Symbols, Shipboard - Heating, Ventilation, and Air Conditioning(HVAC) Standard Specification forSteel Sheet Piling, Cold Formed, Light Gage

Standard Specification for HotWater Sanitizing Commercial Dishwashing Machines, Stationary Rack Type Standard Test Methods forManganese in Water Standard Specification for HotWater Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor RackType Standard Test Method forSilica in Water Standard Test Method for AirErosion of Sprayed Fire- Resistive Materials (SFRMs) Applied to StructuralMembers R(2000) Standard Specification forHeat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor RackType Standard Practice forDetermining the Consistency of Refactory Castable Using the Ball-in-Hand Test Standard Specification for HotWater Sanitizing Commercial Dishwashing Machines, Multiple Tank, RacklessConveyor Type Standard Specification forHigh-Silicon Iron Pipe and Fittings E1-1994 Standard Specification forCommercial Dishwashing Racks R(1998) Standard Specification forDense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers Standard Practice for SurfacePreparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb ShelterPanels Standard Practice for FiringRefractory Concrete Specimens R(1995) Standard Test Method forRubber - Deterioration by Heating in Air (Test Tube Enclosure) Standard Specification forStructural Film Adhesives for Honeycomb Sandwich Panels E1-2000 Standard Specification forCorrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be AdhesivelyBonded in Honeycomb Shelter Panels Standard Test Method forEvaluating Degree of Settling of Paint R(1998) Standard Test Methods ofTesting Cellulose Acetate Standard Specification forFilter Units, Air Conditioning: Viscous-Impingement Type, Cleanable R(1990) Standard Test Method forCompressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds Standard Test Method forOxidation Stability of Aviation Fuels (Potential Residue Method) IPDesignation: 138/99; British Standard 4456

Standard Test Method for SulfatedAsh from Lubricating Oils and Additives IP Designation: 163/96; BritishStandards 4716 Standard Test Methods forNonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation Standard Test Method forDielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes Standard Test Method forInorganic Chlorides and Sulfates in Insulating Oils Standard Specification forStainless Steel Socket Button and Flat Countersunk Head Cap Screws Standard Specification forStainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric) Standard Practice for Criteriafor Use in Evaluation of Testing Laboratories and Organizations forExamination and Inspection of Steel, Stainless Steel, and Related A Standard Specification forStainless Steel Socket-Set Screws Standard Specification forStainless Steel Socket Set Screws (Metric) Standard Specification forEpoxy-Resin-Base Bonding Systems for Concrete Standard Test Method for BondStrength of Epoxy-Resin Systems Used with Concrete by Slant Shear Standard Test Method forTensile Properties of Thin Plastic Sheeting Standard Performance andSafety Specification for Cryosurgical Medical Instruments R(1996) Standard Terminology Relatingto Plastics Standard Guide forReflected-Light Photomicrography Standard PerformanceSpecification for Padlocks Standard Specification forEpoxy-Coated Steel Wire and Welded Wire Fabric for Reinforcement Standard Test Method forThermal Compatibility between Concrete and an Epoxy-Resin Overlay Standard Test Methods for TireCords, Tire Cord Fabrics, and Industrial Filament Yarns Made fromManufactured Organic-Base Fibers Standard Test Methods forDissolved Oxygen in Water R(1996) Standard Test Methods forChemical and Mass Spectrographic Analysis of Nuclear-Grade Gadolinium Oxide(Gd2O3) Powder Standard Test Methods forSpecific Gravity, Apparent, of Liquid Industrial Chemicals R(2000) Standard Test Method forFoaming Characteristics of Lubricating Oils IP Designation: 146/2000; BritishStandard 5092 Standard Test Method forInsolubles in Used Lubricating Oils Standard Test Method for AgarDiffusion Cell Culture Screening for Cytotoxicity E1-1995 R(1995) Standard Test Method forResistance of Adhesive Bonds to Chemical Reagents Standard Test Method forTensile Properties of Adhesive Bonds Standard Test Method forApplied Weight per Unit Area of Dried Adhesive Solids Standard Practice for AppliedWeight per Unit Area of Liquid Adhesive Standard Specification forStainless Steel Billet, Bar, and Wire for Surgical Instruments Standard Specification forPrefabricated Masonry Panels Standard Test Methods forFlexible Resin-Coated Glass Fabrics and Glass Fabric Tapes Used forElectrical Insulation Standard Test Method for Peelor Stripping Strength of Adhesive Bonds Standard Test Method forStrength Properties of Adhesive Bonds in Shear by Compression Loading

Standard Test Method forStrength Properties of Adhesives in Plywood Type Construction in Shear byTension Loading Standard Specification forLetters and Numerals for Ships R(1998) Standard Specification forSteel, Sheet and Strip, Heavy Thickness Coils, Carbon, Hot-Rolled, StructuralQuality Standard Specification forStainless Steel Needle Tubing R(1998) Standard Test Method for KnockCharacteristics of Aviation Gasolines by the Supercharge Method IPDesignation: 119/96 Standard Specification forAviation Gasolines Standard Specification forGlass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs Standard Specification forCuprous Oxide for Use in Antifouling Paints R(1999) Standard Specification forAlloy Steel Socket Set Screws Standard Specification forAlloy Steel Socket Set Screws (Metric) Standard Specification forPrecast Concrete Water and Wastewater Structures Standard Test Methods forEthylcellulose Standard Specification forAdhesives for Duct Thermal Insulation E1-1996 R(1996) Standard Specification forCommercial Food Waste Disposers R(1998) Standard Test Method for BlockingResistance of Paper and Paperboard TAPPI T 477 m-47 Standard Specification forNoncarbonated Mechanically Refrigerated, Beverage Dispenser (Visible Product) Standard Specification forSlicing Machines, Food, Electric Standard Specification forMinimum Performance and Safety Requirements for Resuscitators Intended forUse with Humans R(1999) Standard Practice forDetermining the Properties of Jacketing Materials for Thermal InsulationR(1996) Standard Definitions of TermsRelating to Hemostatic Forceps R(1996) Standard Specification forNonrigid Vinyl Chloride Polymer Tubing Standard Specification forResilient Connectors between Reinforced Concrete Manhole Structures, Pipes,and Laterals Standard Practice for SamplingElectrical Insulating Liquids Standard Practice for TestingConcrete Pipe Sewer Lines by Low-Pressure Air Test Method R(1997) Standard Test Method forDissipation Factor (or Power Factor) and Relative Permittivity (DielectricConstant) of Electrical Insulating Liquids E1-1999 Standard Test Method forResistance to Chemicals of Resilient Flooring Standard Test Method forRubber Property - Plasticity and Recovery (Parallel Plate Method) Standard Specification forBorax R(1997) Standard Classification ofPotential Health and Safety Concerns Associated with Thermal InsulationMaterials and Accessories Standard Test Methods forEstimating the Largest Grain Observed in a Metallographic Section (ALA GrainSize) Standard Specification forExterior Gypsum Soffit Board Standard Specification forSurface-Applied Bonding Compounds for Exterior Plastering Standard Specification forSerological Pipet, Disposable Plastic R(1998)

Standard Specification forGrout Fluidifier for Preplaced-Aggregate Concrete Standard Test Method for ConePenetration of Petrolatum IP Designation: 179/79(95); British Standard 4698 Standard Test Method forCongealing Point of Petroleum Waxes, Including Petrolatum IP Designation:76/95; British Standard 5088 R(1998) Standard Test Method for Flowof Grout for Preplaced- Aggregate Concrete (Flow Cone Method) Standard Practice for QualityControl Receipt Inspection Procedures for Protective Coatings (Paint), Usedin Marine Construction and Shipbuilding Standard Practice forInspection of Marine Surface Preparation and Coating Application Standard Test Method forCompressive Strength of Grouts for Preplaced-Aggregate Concrete in theLaboratory Standard Test Method forOxidation Stability of Lubricating Greases by the Oxygen Bomb Method IP Designation:142/85 (92); E1-1995 R(1995) Standard Test Method forOxidation Characteristics of Inhibited Mineral Oils British Standard 4388 Standard Test Methods forRubber Properties in Compression or Shear (Mechanical Oscillograph) R(1997) Standard Specification forPenetration-Graded Asphalt Cement for Use in Pavement Construction R(1999) Standard Specification forPoly(Vinyl Chloride)(PVC) Corrugated Sewer Pipe with a Smooth Interior andFittings Standard Test Method forImpact Strength of Adhesive Bonds Standard Test Method for WaterResistance of Shipping Containers by Spray Method Standard Test Method for BondStrength of Mortar to Masonry Units E1-1997 R(1997) Standard Specification forMixing Machines, Food, Electric Standard Test Method forBearing Strength of Plastics Standard Specification forSteel Drill Screws for the Application of Gypsum Panel Products or MetalPlaster Bases to Steel Studs From 0.033 in. (0.84 mm) to 0.112 in. Standard Test Method forMeasuring Shrinkage from Mold Dimensions of Thermoplastics Standard Specification forGong, Sound Signaling R(1996) Standard Specification forCompressible-Washer-Type Direct Tension Indicators for Use with StructuralFasteners [Metric] Standard Specification forPredecorated Gypsum Board Standard Specification forMedical and Surgical Suction and Drainage Systems R(2000) Standard Guide for Lock-StripGasket Glazing R(1997) Standard Specification forRigid Laryngoscopes for Tracheal Intubation - Hook-On Fittings forLaryngoscope Handles and Blades with Lamps Standard Guide for InstallingAsbestos-Cement Nonpressure Pipe Standard Specification forChemical Passivation Treatments for Stainless Steel Parts E1-2000 Standard Test Methods forAbrasion Resistance of Organic Coatings by Falling Abrasive Standard Practice forInfiltration and Exfiltration Acceptance Testing of Installed PrecastConcrete Pipe Sewer Lines R(2000) Standard Test Method forLaboratory Determination of Degree of Bleeding of Traffic Paint R(1998) Standard Specification forGlass Volumetric (Transfer) Pipets R(1999) Standard Test Method forInterfacial Tension of Oil Against Water by the Ring Method

Standard Test Method forEvaporation Loss of Lubricating Greases and Oils Standard Test Method for Acidand Base Number by Color- Indicator Titration IP Designation: 139/98; BritishStandard 2634 Standard Specification forDiesel Fuel Oils Standard Test Methods forCalculated Cetane Index of Distillate Fuels IP Designation: 364/84; E1-2000R(2000) Standard Specification forQuicklime and Hydrated Lime for Soil Stabilization Standard Specification forEmulsified Asphalt Standard Practice for SamplingBituminous Paving Mixtures Standard Specification forGround Granulated Blast- Furnace Slag for Use in Concrete and Mortars Standard Specification forCore-Splice Adhesive for Honeycomb Sandwich Structural Panels Standard Test Method forRubber Property - Volume Resistivity of Electrically Conductive andAntistatic Products E1-2000 R(2000) Standard Specification forValve Locking Devices E1- 1996 R(1996) Standard Specification forPreformed Expansion Joint Filler for Concrete (Bituminous Type) Standard Test Method for Timeof Flow of Fiber- Reinforced Concrete Through Inverted Slump Cone Standard Specification forMixing Plants for Hot- Mixed, Hot-Laid Bituminous Paving Mixtures Standard Terminology ofPackaging and Distribution Environments Standard Test Method forPressure-Sensitive Adhesive- Coated Tapes Used for Electrical and ElectronicApplications Standard Practice for PipingSystem Drawing Symbols Standard Practice forDetection and Evaluation of Discontinuities by the Immersed Pulse-EchoUltrasonic Method Using Longitudinal Waves Standard Specification forSteel Self-Piercing Tapping Screws for the Application of Gypsum PanelProducts or Metal Plaster Bases to Wood Studs or Steel Studs Standard Test Method forApparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimensby Tension Loading (Metal-To-Metal) Standard Test Method for Hazeand Luminous Transmittance of Transparent Plastics Standard Test Method forInitial Tear Resistance of Plastic Film and Sheeting Standard Practice forDetermining Electrical Conductivity Using the Electromagnetic (Eddy-Current)Method Standard Test Method forMeasurement of Dry-Film Thickness of Organic Coatings Using Micrometers Standard Practice forConducting Exterior Exposure Tests of Paints on Wood Standard Test Method forDetermining Total Nitrogen in Resins and Plastics R(1998) Standard Practice forConducting Exterior Exposure Tests of Paints on Steel (Withdrawn) StandardSpecification for Flashlights on Vessels Standard Practice forInstallation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation Standard Specification forChemical Admixtures for Use in Producing Flowing Concrete

Standard Test Method forFlexural Toughness and First- Crack Strength of Fiber-Reinforced Concrete(Using Beam with Third-Point Loading) Standard Test Method forHydrogen in Petroleum Fractions

Standard Test Method forSampling and Testing Grout Standard Test Methods forDetermination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel and in Iron,Nickel, and Cobalt Alloys Standard Specification forFeeders, Detergent, Rinse Agent, and Sanitizing Agent for CommercialDishwashing and Glasswashing Machines Standard Specification forDispensers, Powdered Iced Tea Standard Specification forGeneral Workmanship and Performance Measurements of Hemostatic ForcepsR(1996) Standard Specification forSpray-Applied Rigid Cellular Polyurethane Thermal Insulation Standard Test Method for FiberAnalysis of Paper and Paperboard TAPPI T 401 om-88 R(1999) Standard Specification forFlat Glass R(1997) Standard Classification forAcoustically Absorptive Materials Applied by Trowel or Spray E1-1997 R(1997) Standard Test Method forStiffness Properties of Plastics as a Function of Temperature by Means of aTorsion Test Standard Specification forPipets, Milk and Cream Examination Standard Test Method forResistance of Transparent Plastics to Surface Abrasion Standard Specification forGlass Serological Pipets (General Purpose and Kahn) Standard Specification forAccessories for Gypsum Wallboard and Gypsum Veneer Base Standard Specification forPoly(Vinyl Chloride) Jacket for Wire and Cable Standard Specification forFrying and Braising Pans, Tilting Type Standard Specification forHeat-Treated Flat Glass - Kind HS, Kind FT Coated and Uncoated Glass Standard Specification forRubber Insulating Blankets Standard Specification forRubber Insulating Covers Standard Specification forRubber Insulating Line Hose R(1999) Standard Test Method forMeasuring Rubber Deterioration - Cut Growth Using Ross Flexing ApparatusE1-1999 R(1999) Standard Specification forBorosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV)Applications Standard Test Methods forRubber Property - Stiffening at Low Temperatures: Flexible Polymers andCoated Fabrics R(1997) Standard Test Method forRubber Property - Resilience Using a Rebound Pendulum R(2000) Standard Specifications forFlexible Cellular Materials - Latex Foam Standard Specification forFlexible Cellular Materials - Sponge or Expanded Rubber Standard Test Method for YarnNumber Based on Short- Length Specimens Standard Test Method for CleavageStrength of Metal-to- Metal Adhesive Bonds E1-1997 Standard Specification forInstallation of Lathing and Furring to Receive Interior and Exterior PortlandCementBased Plaster Standard Test Method forTemperature of Freshly Mixed Portland Cement Concrete

Standard Test Methods for Ironin Rosin Tall Oil Fatty Acids and Other Related Products Standard Test Method for Waterin Organic Liquids by Coulometric Karl Fischer Titration

Standard Specification forVinyl Composition Floor Tile Standard Test Methods forAcidity or Alkalinity of Water R(1996) Standard Test Methods for Ironin Water Standard Specification forFibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material) Standard Test Method forMeasurement of Masonry Flexural Bond Strength Standard Specification forFine Aggregate for Bituminous Paving Mixtures Standard Test Method forEffect of Water on Compressive Strength of Compacted Bituminous MixturesAASHTO No. T165 R(2000) Standard Specification forRubber - Concentrated, Ammonia Preserved, Creamed, and Centrifuged NaturalLatex Standard Practice forLaboratories Testing Concrete and Concrete Aggregates for Use in Constructionand Criteria for Laboratory Evaluation Standard Test Method forDistillation Range of Volatile Organic Liquids IP Designation: 195/81 Standard Terminology forSurgical Scissors - Inserted and Non-Inserted Blades R(1998) Standard Specification forInserted and Noninserted Surgical Scissors R(1998) Standard Specification forPipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures Standard Test Methods forViscosity of Adhesives Standard Specification forSpun Cast Prestressed Concrete Poles Standard Test Methods forPhosphorus in Lubricating Oils and Additives Standard Specification forNonmetallic Honeycomb Core for Use in Shelter Panels Standard Test Method forMeasuring Apparent Viscosity of Lubricating Greases Standard Test Method forAcidity of Hydrocarbon Liquids and Their Distillation Residues Standard Test Method for WaterReaction of Aviation Fuels Standard Specification forPharmaceutical Glass Graduates Standard Specification forCommon Laboratory Glass Funnels Standard Specification forLiquid Caustic Soda (Sodium Hydroxide Solution) R(1997) Standard Specification forSoda Ash, Anhydrous (Sodium Carbonate, Anhydrous) Standard Specification forPackaged Dry, Hydraulic- Cement Grout (Nonshrink) Standard Specification forFiber-Reinforced Concrete and Shotcrete Standard Test Methods forEvaluating Nonwoven Fabrics Standard Test Method forPercent Ash Content of Engine Coolants and Antirusts Standard Specification forIndustrial Grade Ethylene Glycol Standard Test Method forBoiling Point of Engine Coolants R(1998) Standard Test Method forReserve Alkalinity of Engine Coolants and Antirusts Standard Test Method forDensity or Relative Density of Engine Coolant Concentrates and EngineCoolants by the Hydrometer Standard Test Methods forWater in Engine Coolant Concentrate by the Karl Fischer Reagent Method Standard Specification for Non-MetallicExpansion Joints R(1998) Standard Test Methods forElectrical Conductivity and Resistivity of Water R(1999) Standard Test Method forHardness in Water Standard Specification forFlexible, Low Permeance Vapor Retarders for Thermal Insulation Standard Specification forSpray Shields for Mechanical Joints Standard Specification forAggregate for Single or Multiple Bituminous Surface Treatments

Standard Test Methods for Amountof Material in Soils Finer Than the No. 200 (75-Micrometer) Sieve Standard Practice for thePreparation of Substitute Ocean Water E1-1999 Standard Test Method for WaterVapor Content of Gaseous Fuels by Measurement of Dew-Point TemperatureR(2000) Standard Test Method for Pilesunder Static Axial Compressive Load E1-1994 R(1994) Standard Specification forTurnbuckles, Swaged, Welded, Forged R(1996) Standard Test Method forBlocking Point of Potentially Adhesive Layers Standard Specification forMuriatic Acid (Technical Grade Hydrochloric Acid) Standard Test Method forRubber Deterioration - Surface Ozone Cracking in a Chamber Standard Practice for Effectof Moisture and Temperature on Adhesive Bonds Standard Specification forMethyl Isobutyl Ketone R(1997) Standard Terminology Relatingto Product Counterfeit Protection Systems Standard Specification forSampling and Testing of Reusable Laboratory Glassware R(1996) Standard Test Method forBromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins byElectrometric Titration IP Designation: 130/98 Standard Test Method forDistillation of Petroleum Products at Reduced Pressure Standard Test Method forFlexural Strength of Advanced Ceramics at Ambient Temperature R(1996) Standard Practice for HumanEngineering Design for Marine Systems, Equipment and Facilities R(2000) Standard Test Method forSpecific Resistance (Resistivity) of Electrical Insulating Liquids Standard Test Method forRubber Deterioration - Surface Ozone Cracking Outdoors or Chamber (TriangularSpecimens) Standard Guide for pH ofAqueous Solutions of Soaps and Detergents Standard Practice for Samplingand Preparing Aqueous Solutions of Engine Coolants or Antirusts for TestingPurposes Standard Test Method forFreezing Point of Aqueous Engine Coolants R(1998) Standard Test Methods forFluoride Ion in Water Standard Test Method forMeasurement of Surface Layer Thickness by Radial Sectioning R(1998) Standard Specification forAnodes, Sacrificial Zinc Alloy R(1996) Standard Test Methods forResistance of Adhesives to Cyclic Laboratory Aging Conditions E1-1997 Standard Test Method forFlexural Strength of Adhesive Bonded Laminated Assemblies Standard Test Methods forPallets and Related Structures Employed in Materials Handling and Shipping Standard Test Methods forNondestructive Measurement of Dry Film Thickness of Nonmagnetic CoatingsApplied to a Ferrous Base Standard Test Method for BulkSpecific Gravity and Density of Compacted Bituminous Mixtures Using CoatedSamples E1-1998 Standard Specification forConcrete Joint Sealer, Hot- Applied Elastic Type Standard Guide for theMeasurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiationof Semiconductor Devices Standard Specification forReagent Water Standard Test Method forBearing Capacity of Soil for Static Load and Spread Footings Standard Specification forCalcium Carbonate Pigments R(1999) Standard Test Method forViscosity by Ford Viscosity Cup R(1999)

Standard Test Methods forVolatile Loss from Plastics Using Activated Carbon Methods E1-1999 R(1999) Standard Test Method for LinearDimensional Changes of Nonrigid Thermoplastic Sheeting or Film at ElevatedTemperature Standard Test Methods forCommon Properties of Certain Pigments Standard Test Method for Colorof Clear Liquids (Platinum-Cobalt Scale) Standard Test Method forFineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage Standard Test Method for SieveAnalysis of Glass Spheres E1-1994 R(1994) Standard Test Method forDensity and Relative Density (Specific Gravity) of Liquids by BinghamPycnometer R(1998) Standard Specification forCooker, Steam R(1997) Standard Test Method forRefractive Index and Refractive Dispersion of Hydrocarbon Liquids Standard Test Method forThermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique Standard Specification forEmulsified Asphalt Used as a Protective Coating for Roofing R(2000) Standard Test Method forRubber Property - Compression Set at Low Temperatures E1-1998 R(1997) Standard Guide for InstallingBonded Resistance Strain Gages R(1998) Standard Specification forCommercial Dishwashing Machines, Multiple-Tank, Continuous OvalConveyorType, Heat Sanitizing R(1998) Standard Test Method for MeltFlow Rates of Thermoplastics by Extrusion Plastometer Standard Specification forMaterials for Soil- Aggregate Subbase, Base, and Surface Courses Standard Test Methods forResistance of Plastic Materials to Abrasion Standard Specification forCuffed and Uncuffed Tracheal Tubes E1-1997 Standard Test Method forBromide Ion in Water R(1999) Standard Practice forMinimizing Dosimetry Errors in Radiation Hardness Testing of SiliconElectronic Devices Using Co-60 Sources Standard Guide for PetroleumMeasurement Tables API Standard: API MPMS Ch.11.1; IP Designation: 200/80(90); BSI Handbook; E1-1997 R(1997) Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume I Table 5A - Generalized Crude Oils Correction of Observ Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume II Table 5B - Generalized Products Correction of Observe Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume III Table 6C - Volume Correction Factors for Individual Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume IV Table 23A - Generalized Crude Oils Correction of Obse Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume V Table 23B - Generalized Products Correction of Observe Standard Test Method forOptical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys bythe Argon Atmosphere, Point-To-Plane, Unipolar Self- Initiating Ca Standard Test Methods forChemical Oxygen Demand (Dichromate Oxygen Demand) of Water Standard Test Method forResidual Chlorine in Water R(1996) Standard Test Methods forNonvolatile Content of Resin Solutions R(1994) Standard Test Method forLeakage Tendencies of Automotive Wheel Bearing Greases R(1999)

Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume VI Table 24C - Volume Correction Factors for Individual Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume VII Table 53A - Generalized Crude Oils Correction of Obs Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume VIII Table 53B - Generalized Products Correction of Obse Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume IX Table 54C - Volume Correction Factors for Individual Standard Test Method forDetermining the Water Washout Characteristics of Lubricating Greases Standard Classification forAcoustical Ceiling Products Standard Test Method forSulfur in Petroleum Products (Lamp Method) IP Designation: 107/86 Standard Specification forMetal, Expanded, Steel R(1997) Standard Specification forPentachlorophenol E1-1997 R(1997) Standard Test Method forCorrosive Sulfur in Electrical Insulating Oils IP Designation: 315/86 Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Volume Correction FactorsVolume X - Background, Development, and Program Documentation E Standard Guide for PetroleumMeasurement Tables Petroleum Measurement Tables Intraconversion betweenVolume Measures and Density Measures Volume XI/XII Volume XI - Ta Standard Guide for PetroleumMeasurement Tables Manual of Petroleum Measurement Standards Chapter 11.1 -Volume Correction Factors Volume XIII Table 5D - Generalized Standard Guide for PetroleumMeasurement Tables Manual of Petroleum Measurement Standards Chapter 11.1 -Volume Correction Factors Volume XIV Table 53D - Generalized Standard Test Method forPerformance of Griddles Standard Test Method for pH ofEngine Coolants and Antirusts E1-1998 R(1997) Standard Specification forFaced Rigid Cellular Polyisocyanurate Thermal Insulation Board ReplacesC984-94 and C1013-94 Standard Test Methods for pHof Water Standard Test Method for Odorof Volatile Solvents and Diluents R(1996) Standard Test Method forDensity, Relative Density (Specific Gravity), or API Gravity of CrudePetroleum and Liquid Petroleum Products by Hydrometer Method API Design Standard Test Methods forChemical Analysis of White Lead Pigments R(1999) Standard Test Method forPhthalic Anhydride Content of Alkyd Resins and Esters Containing OtherDibasic Acids (Gravimetric) E1-1996 R(1996) Standard Test Method forEffect of Household Chemicals on Clear and Pigmented Organic Finishes R(1998) Standard Test Method for FlashPoint and Fire Point of Liquids by Tag Open-Cup Apparatus E1-1997 R(1997) Standard Specification forBrick, Insulating, High Temperature, Fire Clay R(1997) Standard Test Method forHydrocarbon Types in Liquid Petroleum Products by Fluorescent IndicatorAdsorption IP Designation: 156/97 Standard Reference Radiographsfor Titanium Castings Standard Test Method forNeedle Penetration of Petroleum Waxes Standard Test Method for SmokePoint of Kerosine and Aviation Turbine Fuel IP Designation: 57/95

Standard Specification forStainless Steel Suture Needle Holders - General Workmanship Requirements andCorresponding Test Methods R(1996) Standard Specification forBitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing Standard Specification forRubber Sheet Gaskets R(2000) Standard Practice for Use ofSI (Metric) Units in Maritime Applications (Committee F-25 Supplement toIEEE/ASTM SI 10) Standard Test Method for TuftBind of Pile Yarn Floor Coverings Discontinued November 1995 and Reinstated Standard Practice for WorkingLife of Liquid or Paste Adhesives by Consistency and Bond Strength Standard Test Method forViscosity of Cellulose Derivatives by Ball-Drop Method R(2000) Standard Specification forRubber Floor Tile Standard Specification forManually Operated Fueling Hose Reels R(1996) Standard Test Methods forMoisture in Cellulose R(1998) Standard Practice for Rubber -Standard Temperatures for Testing Standard Test Method forNonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer,and Related Products E1-2000 R(2000) Standard Specification forOvens, Microwave, Electric R(1999) Standard Test Method forPermanganate Time of Acetone and Methanol R(1997) Standard Test Method for Waterin Volatile Solvents (Karl Fischer Reagent Titration Method) R(1999) Standard Practice forReporting Particle Size Characteristics of Pigments R(1997) Standard Practice forQuantities of Materials for Bituminous Surface Treatments R(2000) Standard Specification forPressure-Reducing Valves for Water Systems, Shipboard Standard Test Method forHydrazine in Water R(2001) Standard Test Method for AcidNumber (Empirical) of Synthetic and Natural Waxes Standard Test Method forStiffness of Fabrics E1-1999 Standard Practice for AngleResolved Optical Scatter Measurements on Specular or Diffuse Surfaces Standard Test Methods forChemical Analysis of White Titanium Pigments R(1999) Standard Test Method forUnsaponifiable Matter in Alkyd Resins and Resin Solutions R(1998) Standard Test Method for FattyAcid Content of Alkyd Resins and Alkyd Resin Solutions R(1998) Standard Test Method forNondestructive Measurement of Dry Film Thickness of Nonconductive CoatingsApplied to a Nonferrous Metal Base Standard Test Method for WaterSeparability of Petroleum Oils and Synthetic Fluids Standard Test Methods for ConePenetration of Lubricating Grease Using One-Quarter and One-Half Scale ConeEquipment IP Designation: 310/84 (92) Standard Test Method forEstimation of Net Heat of Combustion of Aviation Fuels Standard Test Methods forRubber O-Rings R(1999) Standard Test Method forRubber Property - International Hardness R(1999) Standard Practice for LiquidPenetrant Examination Standard Practice for Rubberand Rubber Latices - Nomenclature Standard Test Method for Twistin Yarns by Direct- Counting Standard Test Method forTearing Strength of Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus Standard Test Methods forAmmonia Nitrogen in Water Standard Classification Systemfor Polychlorotrifluoroethylene (PCTFE) Plastics

Standard Practice for OutdoorWeathering of Plastics Standard Guide for ComputedTomography (CT) Imaging Standard Practice for MagneticParticle Examination Standard Test Method forMicronaire Reading of Cotton Fibers Standard Guide for Selectionof Security Technology for Protection Against Counterfeiting, Alteration,Diversion, Duplication, Simulation, and Substitution (CADDSS) o Standard Practice for SoilInvestigation and Sampling by Auger Borings R(2000) Standard Test Method forRubber Property - Elongation at Specific Stress E1-1991 R(1996) Standard Specification forCaustic Potash; Solid (Potassium Hydroxide; Solid) Standard Test Methods forFully Cured Silicone Rubber- Coated Glass Fabric and Tapes for ElectricalInsulation Standard Test Method forMoisture or Volatile Distillates in Bituminous Paving Mixtures R(2001) Standard Test Method forDensity of Liquid Coatings, Inks, and Related Products Standard Test Method forHeptane Miscibility of Lacquer Solvents R(2000) Standard Test Method forLow-Temperature Torque of Ball Bearing Grease R(1997) Standard Test Method for OilAbsorption of Pigments by Gardner-Coleman Method Standard Test Method for AmylaceousMatter in Adhesives Standard Test Method forNonvolatile Content of Aqueous Adhesives Standard Test Method forSolidification Point of Industrial Organic Chemicals Standard Test Method forDiffuse Light Transmission Factor of Reinforced Plastics Panels Standard Practice for FilteredOpen-Flame Carbon-Arc Exposures of Plastics Standard Test Method for ASTMColor of Petroleum Products (ASTM Color Scale) IP Designation: 196/97 Standard Test Method forDensity of Plastics by the Density-Gradient Technique Standard Test Methods forCarbon Black - Ash Content Standard Test Methods forCarbon Black - Heating Loss R(2000) Standard Test Method forCarbon Black - Iodine Adsorption Number Standard Test Methods forCarbon Black - pH Value R(2000) Standard Test Method forCarbon Black, Pelleted - Pour Density E1-1999 Standard Test Method for Widthof Leather Standard Test Method for VicatSoftening Temperature of Plastics Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe, Schedules 40 and 80 Standard Test Method for Waterin Insulating Liquids by Coulometric Karl Fischer Titration Standard Practice forSpecifying Color by the Munsell System Standard Test Method for Colorof Transparent Liquids (Gardner Color Scale) Standard Test Method forViscosity of Transparent Liquids by Bubble Time Method Standard Test Method forSulfur in Petroleum Products (High-Temperature Method) Standard Test Method forCalculation of Volume and Weight of Industrial Aromatic Hydrocarbons R(2000) Standard Test Method forDensity and Unit Weight of Soil in Place by the Sand-Cone Method Standard Test Methods forLaboratory Compaction Characteristics of Soil Using Modified Effort (56,000ftlbf/ft3 (2,700 kN-m/m3))1 Standard Specification forCellulose Acetate Propionate Molding and Extrusion Compounds

Standard Practice for ComputedTomographic (CT) Examination Standard Test Methods forLinear Density of Textile Fibers Standard Test Method forBreaking Strength of Yarn in Skein Form Standard Test Method forFiller Content of Phenol, Resorcinol, and Melamine Adhesives Standard Test Method forPenetration Test and Split- Barrel Sampling of Soils Standard Practice forThin-Walled Tube Sampling of Soils for Geotechnical Purposes Standard Test Method forDynamic Shock Cushioning Characteristics of Packaging Material Standard Test Method forTime-To-Failure of Plastic Pipe under Constant Internal Pressure Standard Test Method forResistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, andFittings Standard Terminology forAbbreviated Terms Relating to Plastics Standard Specification forKettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or WallMounted, Direct Connected, Gas Fired and Electric Fired Standard Test Method forCarbon Black in Olefin Plastics Standard Specification forKettles, Steam-Jacketed, 32 Oz to 20 Gal (1 to 75.7 L), Tilting, TableMounted, Direct Connected, Gas Fired and Electric Fired Standard Specification forFreezers, Ice Cream, Soft Serve, Shake Standard Test Method forNitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction) E12000R(2000) Standard Test Method forOxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic AcidProcedures) Standard Test Method forCorrosion Produced by Leather in Contact with Metal Standard Test Method forAcidity in Volatile Solvents and Chemical Intermediates Used in Paint,Varnish, Lacquer, and Related Products R(1999) Standard Test Method forAlkalinity in Acetone R(1999) Standard Test Method for EsterValue of Solvents and Thinners R(1996) Standard Test Methods forCarbon Black - Sulfur Content Standard Test Method forCompressive Properties of Rigid Cellular Plastics Standard Test Method forApparent Density of Rigid Cellular Plastics Standard Test Method forTensile and Tensile Adhesion Properties of Rigid Cellular Plastics R(1995) Standard Specification forChromated Copper Arsenate R(2000) Standard Guide for IncludingGovernment Procurement Requirements in ASTM Documents R(1999) Standard Test Method forRubber Property - Abrasion Resistance (Footwear Abrader) R(2000) Standard Test Method for Waterin Phenol and Related Materials by the Iodine Reagent Method Standard Practice for Makingand Curing Soil-Cement Compression and Flexure Test Specimens in theLaboratory Standard Test Methods forCompressive Strength of Molded Soil-Cement Cylinders Standard Test Method for AcidValue of Organic Coating Materials E1-1996 R(1996) Standard Test Methods forDrying, Curing, or Film Formation of Organic Coatings at Room TemperatureR(1999) Standard Test Methods for Rubber-Viscosity,Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer) Standard Test Methods forResistance of Dried Films of Varnishes to Water and Alkali E1-1996 R(1996) Standard Test Methods forEpoxy Content of Epoxy Resins Standard Test Methods forWater Vapor Transmission of Organic Coating Films E1-1999 R(1999)

Standard Test Method forEvaluation of Painted or Coated Specimens Subjected to Corrosive EnvironmentsR(2000) Standard Specification forFlexible Cellular Materials - Vinyl Chloride Polymers and Copolymers(Closed-Cell Foam) Standard Specification forDriven Fasteners: Nails, Spikes, and Staples Standard Specification for GlassFabrics (Woven and Treated) for Roofing and Waterproofing Standard Guide for ComputedTomography (CT) System Selection R(2001) Standard Test Methods forPolytetrafluoroethylene Tubing Standard Test Methods for Chromiumin Water R(1996) Standard Test Methods forCopper in Water Standard Test Methods for Zincin Water Standard Test Method forEnvironmental Stress-Cracking of Ethylene Plastics Standard Specification forSolid Vinyl Floor Tile Standard Test Method forTensile Properties of Plastics by Use of Microtensile Specimens Standard Test Methods forImpact Resistance of Plastic Film by the Free-Falling Dart Method Standard Specification forExtruded and Compression Molded Polytetrafluoroethylene (PTFE) Rod and HeavyWalled Tubing Standard Specification forIsobutyl Acetate (95% Grade) Standard Specification forIsobutyl Alcohol R(1999) Standard Test Method forDilution Ratio of Active Solvents in Cellulose Nitrate Solutions R(2000) Standard Test Method for WaterMiscibility of Water- Soluble Solvents Standard Test Methods forHydrolyzable Chloride Content of Liquid Epoxy Resins R(1996) Standard Practice for VisualAppraisal of Colors and Color Differences of Diffusely-Illuminated OpaqueMaterials Standard Practices forPreparation of Aluminum and Aluminum-Alloy Surfaces for Painting R(1998) Standard Practices forPreparation of Magnesium Alloy Surfaces for Painting R(1998) Standard Practice for MakingCementitious Panels for Testing Coatings R(1998) Standard Practice for TestingWater Resistance of Coatings Using Water Fog Apparatus Standard Test Method forLuminometer Numbers of Aviation Turbine Fuels Standard Test Method for OilSeparation from Lubricating Grease During Storage E1-2000 R(2000) Standard Practice forRadiographic Examination Standard Test Method forTransparency of Plastic Sheeting Standard Test Method forRefractive Index of Viscous Materials Standard Test Method for RustProtection by Metal Preservatives in the Humidity Cabinet IP Designation:366/84 Standard Specification forPreformed Expansion Joint Filler for Concrete Paving and StructuralConstruction (Nonextruding and Resilient Bituminous Types) Standard Specification forPreformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Pavingand Structural Construction E1-1996 R(1996) Standard Specification forEpoxy Resins Standard Classification Systemfor Carbon Blacks Used in Rubber Products Standard Practice forConditioning and Testing Textiles E1-July 2000 Standard Specification forAdhesive for Acoustical Materials Discontinued 1993 and Reinstated

Standard Practice forConducting Creep Tests of Metal- To-Metal Adhesives Standard Test Method forClimbing Drum Peel for Adhesives Standard Guide for Performanceof an Ice Rescuer - Level 11 Standard Specification forRigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120 Standard Test Method forBrittleness Temperature of Plastic Sheeting by Impact Standard Specification forAutomatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air orNitrogen Service Standard Test Method for Waterand Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) IPDesignation: MPMS Chapter 10.6; British Standard 2882 Standard Practice for CarbonBlack - Sampling Packaged Shipments R(1997) Standard Test Method forMeasuring Thickness of Leather Test Specimens Standard Test Method forMeasuring Thickness of Leather Units R(2000) Standard Test Method for WaterAbsorption (Static) of Vegetable Tanned Leather Standard Test Method forApparent Viscosity of Plastisols and Organosols at Low Shear Rates Standard Test Method forThermal Endurance of Flexible Sheet Materials Used for Electrical Insulationby the Curved Electrode Method Standard Test Method for RollStability of Lubricating Grease Standard Test Method forNaphthalene Hydrocarbons in Aviation Turbine Fuels by UltravioletSpectrophotometry Standard Test Methods forChemical Analysis of Strontium Chromate Pigment R(1999) Standard Test Method forPackage Stability of Paint Standard Specification forJet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type Standard Test Method forFusibility of Coal and Coke Ash R(2000) Standard Specification forMineral Aggregate Used on Built-Up Roofs R(2000) Standard Test Method forMoisture in Mineral Aggregate Used on Built-Up Roofs E1 R(1999) Standard Test Method forDetection and Measurement of Partial Discharge (Corona) Pulses in Evaluationof Insulation Systems R(1998) Standard Specification forRubber Rings for Asbestos- Cement Pipe R(2000) Standard Test Method forDensity of Adhesives in Fluid Form Standard Test Method forFoaming Tendencies of Engine Coolants in Glassware Standard Test Method for CBR(California Bearing Ratio) of Laboratory-Compacted Soils Standard Test Method forTurbidity of Water Standard Test Method for BetaParticle Radioactivity of Water Standard Test Method forStatic and Kinetic Coefficients of Friction of Plastic Film and Sheeting Standard Test Methods forApparent Density, Bulk Factor, and Pourability of Plastic Materials Standard Test Method forLinear Density of Yarn (Yarn Number) by the Skein Method Standard Test Methods forRubber Property - Shrinkage of Raw and Compounded Hot-Polymerized StyreneButadiene Rubber (SBR) Standard Test Methods forParticle Size (Sieve Analysis) of Plastic Materials Standard Test Method for PropagationTear Resistance of Plastic Film and Thin Sheeting by Pendulum Method Standard Practice forPreparation of Compression- Molded Polyethylene Test Sheets and TestSpecimens

Standard Test Method forDetermining Ignition Temperature of Plastics Standard Test Method forThermal Endurance of Flexible Electrical Insulating Varnishes Standard Test Method for AlphaParticle Radioactivity of Water Standard Test Method forAcetone Tolerance of Heat- Bodied Drying Oils E1-1995 R(1995) Standard Test Method for Ashin Drying Oils and Fatty Acids E1-1995 R(1995) Standard Test Method forQuantitative Determination of Break in Drying Oils E1-1995 R(1995) Standard Test Method for Footsin Raw Linseed Oil (Volumetric Method) E1-1995 R(1995) Standard Test Method forHydroxyl Value of Fatty Oils and Acids E1-1995 R(1995) Standard Test Method forIodine Value of Drying Oils and Fatty Acids Standard Test Method for Losson Heating of Drying Oils E1-1995 R(1995) Standard Test Method forSaponification Value of Drying Oils, Fatty Acids, and Polymerized Fatty AcidsR(1995) Standard Test Method forSpecific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at25/25 Degrees C R(1996) Standard Test Method for TungOil Quality E1-1995 R(1995) Standard Test Method forUnsaponifiable Matter in Drying Oils, Fatty Acids, and Polymerized FattyAcids R(1998) Standard Terminology Relatingto Paper and Paper Products Standard Practice for Methodsof Closing, Sealing, and Reinforcing Fiberboard Boxes Standard Test Method for AcidValue of Fatty Acids and Polymerized Fatty Acids R(1998) Standard Test Method for FattyAcid Composition by Gas- Liquid Chromatography of Methyl Esters E11995R(1995) Standard Test Methods forEvaluation of Total Sulfation Activity in the Atmosphere by the Lead DioxideTechnique Standard Practice of PreparingCoal Samples for Analysis Standard Test Methods ofSampling and Chemical Analysis of Chlorine-Containing Bleaches E1-1995R(1995) Standard Test Method for CloudPoint of Nonionic Surfactants R(1997) Standard Specification forCutback Asphalt (Slow- Curing Type) Standard Specification forCutback Asphalt (Medium- Curing Type) Standard Specification forCutback Asphalt (Rapid- Curing Type) Standard Test Methods forWater Vapor Content of Electrical Insulating Gases by Measurement of DewPoint Guide for Recommended Uses ofPhotoluminescent Safety Markings FSC 9390; Should Be Used Instead of MIL-L-3891B, Which Was Cancelled on October 16, 2000 Standard Test Methods forCyanides in Water Standard Test Method forTheoretical Maximum Specific Gravity and Density of Bituminous PavingMixtures Standard Test Method forSolubility of Asphalt Materials in Trichloroethylene Standard Test Methods forMeasuring Zipper Dimensions Standard Specification forMarine Fuels R(1998)

Standard Specification forPhotoluminescent (Phosphorescent) Safety Markings FSC 9390; Should Be UsedInstead of MIL-L-3891B, Which Was Cancelled on October 16, 2000 Standard Test Methods forTotal, Primary, Secondary, and Tertiary Amine Values of Fatty Amines,Amidoamines, and Diamines by Referee Potentiometric Method E1-1998 R(1 Standard Test Method forPhotopic Luminance of Photoluminescent (Phosphorescent) Markings FSC 9390;Should Be Used Instead of MIL-L-3891B, Which Was Cancelled on Octo Standard Test Method forRubber Property - Vulcanization Using Oscillating Disk Cure Meter Standard Test Method for PrintResistance of Lacquers Standard Guide for Preparationof Zinc-Coated (Galvanized) Steel Surfaces for Painting Standard Test Method for Colorfastnessand Transfer of Color in the Washing of Leather Standard Test Method forDynamic Water Resistance of Shoe Upper Leather by the Dow Corning LeatherTester Standard Test Method forDynamic Water Resistance of Shoe Upper Leather by the Maeser WaterPenetration Tester Standard Specification forPolyethylene Film and Sheeting Standard Specification forPolyethylene (PE) Plastic Pipe, Schedule 40 E1-1999 Standard Test Method forLongitudinal Tensile Properties of "Fiberglass"(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube Standard Test Methods forDetermination of Amine Acid Acceptance (Alkalinity) of Halogenated OrganicSolvents Standard Test Methods forNonvolatile Matter in Halogenated Organic Solvents and Their Admixtures Standard Test Methods forSpecific Gravity of Halogenated Organic Solvents and Their Admixtures R(2000) Standard Test Method forOxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel Standard Practice for RockCore Drilling and Sampling of Rock for Site Investigation Standard Practice for OvenHeat Stability of Poly(Vinyl Chloride) Compositions R(1997) Standard Specification forFEP-Fluorocarbon Molding and Extrusion Materials Standard Test Method forDetermining Dimensions of Thermoplastic Pipe and Fittings Standard Test Method forResponse of Rigid Cellular Plastics to Thermal and Humid Aging Standard Test Method forCoated Fabrics - Low- Temperature Bend Test R(1998) Standard Test Methods forRubber Property - Brittleness Point of Flexible Polymers and Coated FabricsR(2000) Standard Test Method forAdequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and MoldedFittings by Acetone Immersion Standard Test Method for SmokeDensity in Flue Gases from Burning Distillate Fuels R(1999) Standard Practice forConversion of Kinematic Viscosity to Saybolt Universal Viscosity or toSaybolt Furol Viscosity E1, E2-2000 R(1999) Standard Test Method for BasicCalibration of Master Viscometers and Viscosity Oil Standards Standard Test Method for pH ofAqueous Extracts of Wool and Similar Animal Fibers R(2000) Standard Test Method forDensity and Unit Weight of Soil in Place by the Rubber Balloon Method Standard Test Methods forCalibration of Laboratory Mechanical-Rammer Soil Compactors E1-1997 R(1996) Standard Test Method forKinematic Viscosity of Asphalts (Bitumens) IP Designation: 319/84 (89) Standard Test Method forViscosity of Asphalts by Vacuum Capillary Viscometer IP Designation: 222/84(89)

Standard Test Methods forQuantitative Extraction of Bitumen from Bituminous Paving Mixtures Standard Test Method forFolding Endurance of Paper by the M.I.T. Tester Standard Specification for AsphaltGlass Felt Used in Roofing and Waterproofing Standard Test Method forConcentration of Formaldehyde Solutions Standard Test Methods forRheological Properties of Non-Newtonian Materials by Rotational (BrookfieldType) Viscometer Standard Test Method forAdhesion of Organic Coatings by Scrape Adhesion Standard Pictorial SurfacePreparation Standards for Painting Steel Surfaces Standard Test Method forBursting Strength of Leather by the Ball Method Standard Test Method forBreaking Strength of Leather by the Grab Method Standard Test Method forTensile Strength of Leather Standard Test Method for GrainCrack and Extension of Leather by the Mullen Test Standard Test Method for SlitTear Resistance of Leather Standard Test Method forCompressibility of Leather Standard Test Method forLaboratory Determination of Water (Moisture) Content of Soil and Rock by Mass Standard Practice for WetPreparation of Soil Samples for Particle-Size Analysis and Determination ofSoil Constants R(1998) Standard Test Method for CreepProperties of Package Cushioning Materials Standard Specification forNatural Rubber (NR) Technical Grades Standard Test Method forRubber Property - Abrasion Resistance (Pico Abrader) R(2001) Standard Specification forSolvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe andFittings Standard Specification forPolyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter Standard Test Method forRubber Property - Durometer Hardness Standard Specification forPoly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) Standard Test Method forFreeze-Thaw Resistance of Water-Borne Coatings Standard Test Method forCalculation of Color Differences from Instrumentally Measured ColorCoordinates R(2000) Standard Test Method forIdentification of Oils and Oil Acids in Solvent-Reducible Paints R(1999) Standard Practice for TestingWater Resistance of Coatings in 100% Relative Humidity Standard Test Method forTensile Properties of Yarns by the Single-Strand Method Standard Test Method forExtractable Matter in Textiles Standard Practice for SamplingYarn for Testing Standard Test Method forDropping Point of Lubricating Grease over Wide Temperature Range Standard Test Method for WearPreventive Characteristics of Lubricating Grease (Four-Ball Method) R(1996) Standard Test Method forAnalysis of High-Purity n- Heptane and Isooctane by Capillary GasChromatography R(1998) Standard Practice forCalculating Viscosity Index from Kinematic Viscosity at 40 and 100 Degrees CIP Designation: 226/91 (95); British Standard 4459 R(1998) Standard Test Method forOxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel Standard Test Method for TraceSediment in Lubricating Oils

Standard Test Method forOxidation Stability of Distillate Fuel Oil (Accelerated Method) IPDesignation: 388/97; E1-1999 R(1999) Standard Test Method forParticulate Contaminant in Aviation Fuel by Line Sampling IP Designation:216/97 Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe (SDR-PR) Standard Specification forNonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds Standard Test Method forApparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by SplitDisk Method Standard Practice forFabrication of Ring Test Specimens for Glass-Resin Composites Standard Test Methods forLiquid-Contaminant, Inclined- Plane Tracking and Erosion of InsulatingMaterials Standard Classification forMachine-Made "Fiberglass" (Glass-Fiber-ReinforcedThermosetting-Resin) Pipe Standard Practice forUnderground Installation of Thermoplastic Pipe for Sewers and OtherGravity-Flow Applications Standard Test Method forResistance of Shoe Upper Leather to Artificial Perspiration Standard Test Method forMethylene Blue Active Substances E1-1995 R(1995) Standard Test Method forTensile Properties of Glass Fiber Strands, Yarns, and Rovings Used inReinforced Plastics Standard Test Method forShort-Beam Strength of Polymer Matrix Composite Materials and Their LaminatesE1-2000 Standard Test Method forApparent Density of Leather Standard Test Method forAntimony Oxide in White Pigment Separated from Solvent-Reducible PaintsR(1999) Standard Test Method for TraceImpurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography Standard Test Method forVolatile Content of Coatings Standard Test Method forTensile Properties of Organic Coatings Standard Test Method forPigment Content of Solvent- Reducible Paints R(1999) Standard Practice forSeparation of Vehicle from Solvent-Reducible Paints R(1999) Standard Test Method for Heatof Combustion of Hydrocarbon Fuels by Bomb Calorimeter (HighPrecisionMethod) Standard Test Method forFreezing Point of Aviation Fuels Standard Test Method for Colorof Dyed Aviation Gasolines Standard Test Methods forSpecific Gravity of Wood and Wood-Based Materials E1-1997; E2-2000 R(1997) Standard Specification forCationic Emulsified Asphalt Standard Test Method forDetermination of External Loading Characteristics of Plastic Pipe byParallel- Plate Loading Standard Test Method forCarbon Black-Oil Absorption Number Standard Test Method for SandEquivalent Value of Soils and Fine Aggregate Standard Test Method forPermeability of Granular Soils (Constant Head) E1-1993 R(2000) Standard Test Method forOxidation Stability of Mineral Insulating Oil Standard Test Method forDetermination of the Impact Resistance of Thermoplastic Pipe and Fittings byMeans of a Tup (Falling Weight)

Standard Specification forPolyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on OutsideDiameter Standard Test Method forIdentification of Carboxylic Acids in Alkyd Resins E1-1996 R(1996) Standard Test Method forSpecular Gloss of Plastic Films and Solid Plastics Standard Specification forThreaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Plastic Pipe Fittings, Schedule 40 Standard Test Method for Gel Timeand Peak Exothermic Temperature of Reacting Thermosetting Resins Standard Specification forSulfur Hexafluoride Standard Test Method forAccelerated Evaluation of Wood Preservatives for Marine Services by Means ofSmall-Size Specimens E1-1995 R(1994) Standard Test Method for ScrubResistance of Wall Paints Standard Practice forClassification of Soils for Engineering Purposes (Unified Soil ClassificationSystem) Standard Practice for Descriptionand Identification of Soils (Visual-Manual Procedure) Standard Test Method for Formsof Sulfur in Coal R(1998) Standard Test Method for CloudPoint of Petroleum Products British Standard 4458 Standard Test Method forRelative Molecular Mass (Molecular Weight) of Hydrocarbons by ThermoelectricMeasurement of Vapor Pressure R(1997) Standard Test Method forAdhesion of Solid Film Lubricants R(1998) Standard Test Method forThermal Shock Sensitivity of Solid Film Lubricants E1-1998 R(1998) Standard Test Method forCompatibility of Materials with Liquid Oxygen (Impact Sensitivity Thresholdand Pass-Fail Techniques) Standard Specification forThermoplastic Gas Pressure Pipe, Tubing, and Fittings Standard Specification forReinforced Epoxy Resin Gas Pressure Pipe and Fittings Standard Test Method for BondStrength of Electrical Insulating Varnishes by the Helical Coil Test Standard Test Methods forComplex Permittivity (Dielectric Constant) of Solid Electrical InsulatingMaterials at Microwave Frequencies and Temperatures to 1650 Degree Standard Test Method forViscosity and Viscosity Change After Standing at Low Temperature of AircraftTurbine Lubricants R(1998) Standard Test Method forVapor-Liquid Ratio of Spark- Ignition Engine Fuels Standard Test Method forApparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow PropertiesR(1997) Standard Specification forAdhesives for Structural Laminated Wood Products for Use under Exterior (WetUse) Exposure Conditions Standard Practice forClassifying Visual Defects in Glass-Reinforced Plastic Laminate Parts Standard Specification forSolvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems Standard Practice forXenon-Arc Exposure of Plastics Intended for Outdoor Applications Standard Test Method forIsocyanate Groups in Urethane Materials or Prepolymers Standard Test Method for FieldVane Shear Test in Cohesive Soil Standard Test Method for TotalOrganic Carbon in Water E1-1994 Standard Test Method forPhenols in Water by Gas- Liquid Chromatography Standard Test Method forPuncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

Standard Test Method forIndentation Hardness of Rigid Plastics by Means of a Barcol Impressor Standard Test Method for IgnitionLoss of Cured Reinforced Resins Standard Test Method forEvaporation Loss of Lubricating Greases over Wide-Temperature Range Standard Test Method forMeasurement of Extreme- Pressure Properties of Lubricating Grease (FourBallMethod) Test Method for Sonic ShearStability of Polymer- Containing Oils Standard Specification forPlastic Insert Fittings for Polyethylene (PE) Plastic Pipe Standard Test Method for TotalAsh in Leather Standard Test Method forSulfur in Petroleum Products by Wavelength Dispersive X-Ray FluorescenceSpectrometry Standard Test Method forEndurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants(Falex Pin and Vee Method) R(1998) Standard Specification forAsphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing Standard Specification forPreformed Polychloroprene Elastomeric Joint Seals for Concrete PavementsR(1998) Standard Test Method forRubber Property - Resilience by Vertical Rebound Standard Test Method forCorrosion Characteristics of Solid Film Lubricants E1-2000 Standard Guide for Preparationof Metal Surfaces for Adhesive Bonding R(1995) Standard Practice for HeatFusion Joining of Polyolefin Pipe and Fittings Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Schedule 40 Plastic Drain, Waste, andVent Pipe and Fittings E1-1999 Standard Specification forPolybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter Standard Specification forPoly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings Standard Specification forPolybutylene (PB) Plastic Tubing Standard Test Method forBiodegradability of Alkylbenzene Sulfonates Standard Test Method forMeasuring Wear Properties of Fluid Lubricants (Falex Pin and Vee BlockMethod) R(1999) Standard Test Methods forHeat-Shrinkable Tubing for Electrical Use Standard Specification forJoints for IPS PVC Pipe Using Solvent Cement Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) and Poly(Vinyl Chloride) (PVC)Composite Sewer Piping Standard Specification forSocket-Type Polyethylene Fittings for Outside Diameter-ControlledPolyethylene Pipe and Tubing Standard Specification forPolytetrafluoroethylene- Backed Pressure-Sensitive Electrical Insulating Tape Standard Test Method forVolume Nonvolatile Matter in Clear or Pigmented Coatings R(1998) Standard Test Method forDetermination of the Pigment Content of Solvent-Reducible Paints byHigh-Speed Centrifuging R(1999) Standard Test Method forResearch Octane Number of Spark-Ignition Engine Fuel IP Designation: 237 Standard Test Method for MotorOctane Number of Spark- Ignition Engine Fuel IP Designation: 236/87 Standard Practice for RubberChemicals - Determination of Infrared Absorption Characteristics R(1998)

Standard Test Method for Waterand Sediment in Middle Distillate Fuels by Centrifuge E1-1998; E2-1999 Standard Test Method forCalibration and Operation of the Falex Block-On-Ring Friction and WearTesting Machine R(1998) Standard Test Methods forBonded, Fused, and Laminated Apparel Fabrics R(1995) Standard Test Method for BulkSpecific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures Standard Specification forPoly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings Standard Test Method forUnrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting Standard Test Methods for VoidContent of Reinforced Plastics Standard Specification forPolyethylene (PE) Plastic Tubing Standard Specification forAcrylonitrile-Butadiene- Styrene (ABS) Sewer Pipe and Fittings Errata Standard Test Method forSpecific Heat of Liquids and Solids R(2000) Standard Practice forUnderground Installation of Thermoplastic Pressure Piping Standard Test Method forResistance of Organic Coatings to the Effects of Rapid Deformation (Impact)E1-1999 R(1999) Standard Test Method forPreparation of Methyl Esters from Oils for Determination of Fatty AcidComposition by Gas-Liquid Chromatography R(1998) Standard Specification forOzone-Resistant Ethylene- Alkene Polymer Insulation for Wire and Cable Standard Guide for TestingFiliform Corrosion Resistance of Organic Coatings on Metal Standard Test Method forPurity of Methyl Ethyl Ketone by Gas Chromatography Standard Test Method forHiding Power of Paints by Reflectometry Standard Test Method forChromic Oxide in Leather (Perchloric Acid Oxidation) R(1998) Standard Test Method forMeasuring the Relative Stiffness of Leather by Means of a Torsional WireApparatus Standard Specification forAsphalt Roof Cement E1-1997 R(1997) Standard Specification forAsphalt Roof Coatings E1- 1997 R(1997) Standard Specification forAluminum-Pigmented Asphalt Roof Coatings, Non-Fibered, Asbestos Fibered, andFibered Without Asbestos Standard Specification forLubricant for Installation of Preformed Compression Seals in ConcretePavements R(1998) Standard Test Method forObtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials Standard Test Method for WaterAbsorption of Rigid Cellular Plastics Standard Test Method forDensity of Smoke from the Burning or Decomposition of Plastics Standard Specification forChlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-WaterDistribution Systems Standard Specification forStyrene-Rubber (SR) Plastic Drain Pipe and Fittings Standard Test Method forApparent Density of Activated Carbon R(2000) Standard Practice for MakingSolvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings Standard Test Method forOpen-Cell Content of Rigid Cellular Plastics by the Air Pycnometer R(1998)

Standard Test Method forIgnition Characteristics of Finished Textile Floor Covering Materials Standard Test Method forAdhesion of Pressure- Sensitive Tape to Fiberboard at 90 Degree Angle andConstant Stress R(1999) Standard Test Method forParticle Size Distribution of Granular Activated Carbon Standard Test Method forMeasuring the Minimum Oxygen Concentration to Support Candle-like Combustionof Plastics (Oxygen Index) Standard Test Methods forMoisture in Activated Carbon Standard Test Method forNitrogen Content (Kjeldahl) and Hide Substance Content of Leather Standard Specification for GasTurbine Fuel Oils Standard Test Method forResearch and Motor Method Octane Ratings Using On-Line Analyzers IPDesignation: 360/96 R(1999) Standard Test Method forBoiling Range Distribution of Petroleum Fractions by Gas Chromatography Standard Test Method for BaseNumber of Petroleum Products by Potentiometric Perchloric Acid Titration IPDesignation: 276/95 Standard Practice forStatements on Number of Specimens for Textiles Standard Test Methods forDensity of Soil and Soil- Aggregate in Place by Nuclear Methods (ShallowDepth) E1-1997 Standard Test Method forApparent Density of Industrial Aromatic Hydrocarbons R(2000) Standard Test Method forDensity of Soil in Place by the Drive-Cylinder Method Standard Test Methods forEmulsified Bitumens Used as Protective Coatings Standard Specification forGraded Aggregate Material for Bases or Subbases for Highways or Airports Standard Test Method forMeasuring Break Pattern of Leather (Break Scale) Standard Test Method for TotalAcid Acceptance of Halogenated Organic Solvents (Nonreflux Methods) Standard Specification for3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC) Plastic Drain, Waste, andVent Pipe and Fittings Standard Test Method forDensity of Bituminous Concrete in Place by Nuclear Methods R(1997) Standard Test Method forLow-Temperature Viscosity of Automotive Fluid Lubricants Measured byBrookfield Viscometer R(1993) Standard Test Method forAcidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures Standard Test Methods forTensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics Standard Practice for ObtainingHydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings E1- 1999 Standard Practice forDetermining Application Rate of Bituminous Distributors Standard Specification forFilament-Wound "Fiberglass" (Glass-Fiber-ReinforcedThermosetting-Resin) Pipe Standard Specification forCentrifugally Cast "Fiberglass" (Glass-Fiber-ReinforcedThermosetting- Resin) Pipe Standard Specification forPolybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter E1-1999 Standard Specification forEpoxy Molding Compounds Standard Test Method for FlameHeight, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plasticsin a Vertical Position Standard Test Method for WaterContent of Soil and Rock in Place by Nuclear Methods (Shallow Depth) E11997

Standard Specification forClass A Asphalt Shingles Surfaced with Mineral Granules Standard Test Methods forHookup Wire Insulation Standard Specification forType PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings Standard Specification forPolyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter Standard Test Method forTensile Properties of Polymer Matrix Composite Materials

Standard Practice for HeatAging of Plastics without Load R(1997) Standard Test Method for GelTime of Solventless Varnishes Standard Guide for Three-PieceSteel and Tinplate Straight-Wall and Necked-In Aerosol Cans E1-2000 Standard Terminology Relatingto Aerosol Products Standard Test Methods forFlammability of Aerosol Products Standard Test Method forDelivery Rate of Aerosol Products E1-1999 R(1999) Standard Test Method of RapidPressure Determination of Pressurized Products Standard Test Method forDetermination of Leaks in Flexible Packaging by Bubble Emission Standard Practice for StorageTesting of Aerosol Products E1-1997 R(1997) Standard Practice for SafeFilling of Low-Pressure Pressurized Products E1-1997 R(1997) Standard Test Method for Particle-SizeDistribution of Space-Insecticide Aerosol R(1993) Standard Test Method forAerosol Products for Delivered Mass Standard Test Method for TraceQuantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry Standard Specification forSolvent Cements for Styrene- Rubber (SR) Plastic Pipe and Fittings Standard Test Method forRubber Property - Hydrolytic Stability R(1994) Standard Specification forSolvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non- Pressure Piping Co Standard Specification forJoints for Plastic Pressure Pipes Using Flexible Elastomeric Seals Standard Test Method forThermal Endurance of Electrical Insulating Varnishes by the Helical CoilMethod Standard Test Method forTesting Stop-Leak Additives for Engine Coolants R(1999) Standard Specification forModified ETFE-Fluoropolymer Molding and Extrusion Materials Standard Test Method forWind-Resistance of Asphalt Shingles (Fan-Induced Method) Standard Test Method forCarbon Monoxide in the Atmosphere (Continuous Measurement by NondispersiveInfrared Spectrometry) E1-2000 R(2000) Standard Test Method forFatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal) Standard Practice forQualitative Identification of Polymers in Emulsion Paints R(1999) Standard Test Method forChipping Resistance of Coatings E1-1996 R(1996) Standard Test Method forConstituent Content Composite Materials Standard Test Method for Ashin the Analysis Sample of Coal and Coke from Coal Standard Test Method forVolatile Matter in the Analysis Sample of Coal and Coke R(1997) Standard Test Methods forTotal Sulfur in the Analysis Sample of Coal and Coke R(1997) Standard Practice for Rubber -Materials, Equipment, and Procedures for Mixing Standard Compounds andPreparing Standard Vulcanized Sheets (PNS 876:1992) R(1994) Standard Practice for Rubber -Preparation of Pieces for Test Purposes from Products R(1998)

Standard Test Methods forRubber - Evaluation of SBR (Styrene-Butadiene Rubber) Mixed with Carbon Blackor Carbon Black and Oil Standard Specification forJoints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals Standard Specification forUnmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and CoatingMaterials Standard Test Method for TotalMercury in Water Standard Test Method for Thiol(Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and DistillateFuels (Potentiometric Method) Standard Test Method for TotalNitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method Standard Test Method for Saltsin Crude Oil (Electrometric Method) Standard Test Method forPhosphorus in Gasoline Standard Test Method forUndissolved Water in Aviation Turbine Fuels R(1996) Standard Test Method forThermal Oxidation Stability of Aviation Turbine Fuels (JFTOT Procedure) IPDesignation: 323/89 Standard Test Method forAcidity in Aviation Turbine Fuel IP Designation: 354/81(87) Standard Practice for GeneralAmbient Air Analyzer Procedures R(2000) Standard Test Methods forAromatics in Mineral Spirits by Gas Chromatography Standard Specification forButt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE)Plastic Pipe and Tubing Standard Test Method forAutomated Separation and Collection of Particulate and Acidic GaseousFluoride in the Atmosphere (Double Paper Tape Sampler Method) E1-2000 R Standard Test Method forSeparation and Collection of Particulate and Gaseous Fluorides in theAtmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Standard Test Methods forAnalysis for Fluoride Content of the Atmosphere and Plant Tissues (ManualProcedures) E1-2001 R(2001) Standard Practice for DirectInjection of Solvent- Reducible Paints into a Gas Chromatograph for SolventAnalysis R(2001) Standard Practice for VacuumDistillation of Solvents from Solvent-Reducible Paints for Analysis R(1998) Standard Test Method forResistance to Growth of Mold on the Surface of Interior Coatings in anEnvironmental Chamber Standard Test Method forEvaluating Degree of Surface Disfigurement of Paint Films by Microbial(Fungal or Algal) Growth or Soil and Dirt Accumulation Standard Specification forE-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials Standard Test Methods forFlash Point of Liquids by Small Scale Closed-Cup Apparatus E1-1997 Standard Test Methods forAnalysis of White Zinc Pigments R(1999) Standard Practice forClassification of Soils and Soil- Aggregate Mixtures for Highway ConstructionPurposes E1-1999 R(1997) Standard Specification forPTFE Tubing Standard Specification forFilament-Wound Glass-Fiber- Reinforced Thermoset Resin CorrosionResistantTanks Standard Specification forPerfluoroalkoxy (PFA)- Fluorocarbon Resin Molding and Extrusion Materials Standard Specification forPTFE Resin Skived Tape

Standard Specification forPolybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems Standard Specification forEmulsified Coal-Tar Pitch (Mineral Colloid Type) Standard Test Method forPurity of Methyl Isobutyl Ketone by Gas Chromatography Standard Test Method for PeelAdhesion of Pressure- Sensitive Tape

Standard Test Method for LowConcentrations of Lead, Cadmium, and Cobalt in Paint by Atomic AbsorptionSpectroscopy R(1999) Standard Test Method for Lifeof Lubricating Greases in Ball Bearings at Elevated Temperatures Standard Test Method forDetermining Life and Torque of Lubricating Greases in Small Ball BearingsR(1996) Standard Test Method forEstimation of Net Heat of Combustion of Aviation Fuels Standard Test Method forEstimation of Hydrogen Content of Aviation Fuels R(2000) Standard Test Method for FilmHardness by Pencil Test Standard Specification forFEP-Fluorocarbon Sheet and Film Standard Specification forPolytetrafluoroethylene (PTFE) Resin Cast Film Standard Practices forSampling Water from Closed Conduits E1-1999 R(1999) Standard Test Method forMolybdenum in Water R(1996) Standard Test Method for Vanadiumin Water R(1998) Standard Specification forVinyl-Coated Glass Yarns Standard Test Method forTensile Strength and Young's Modulus for High-Modulus Single-FilamentMaterials E1- 1989 R(1989) Standard Specification forViscosity-Graded Asphalt Cement for Use in Pavement Construction R(1999) Standard Test Method forInfiltration Rate of Soils in Field Using Double-Ring Infiltrometer Standard Test Method forCoefficient of Linear Thermal Expansion of Electrical Insulating Materials Standard Test Method forCoated Fabrics Abrasion Resistance (Rotary Platform, Double-Head Abrader)R(1999) Standard Specification forLiquid Sodium Silicates R(1997) Standard Test Methods forWater in Halogenated Organic Solvents and Their Admixtures Standard Test Method forCompressive Properties of Polymer Matrix Composite Materials with UnsupportedGage Section by Shear Loading Standard Test Method forEnthalpies of Fusion and Crystallization of Polymers by Differential ScanningCalorimetry (DSC) Standard Test Method forTransition Temperatures of Polymers by Differential Scanning Calorimetry Standard Test Method forUnreacted Toluene Diisocyanates in Urethane Prepolymers and Coating Solutionsby Gas Chromatography E1-1996 R(1996) Standard Test Method forMechanical Cone Penetration Tests of Soil Standard Test Method forChloride in Trichlorotrifluoroethane Standard Test Method forPurity of Halogenated Organic Solvents Standard Test Method forWashability Properties of Interior Architectural Coatings

Standard Practice for Rubber -Identification by Pyrolysis-Gas Chromatography R(1998) Standard Specification forFlexible Cellular Materials - Urethane for Furniture and AutomotiveCushioning, Bedding, and Similar Applications Standard Specification forAsphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules Standard Test Method forAverage Velocity in a Duct Using a Thermal Anemometer R(2001) Standard Test Method forTension-Tension Fatigue of Polymer Matrix Composite Materials

Standard Test Method forDetermining Electrolytic Corrosion of Copper by Adhesives R(2000) Standard Specification forMineral Insulating Oil Used in Electrical Apparatus Standard Specification forRubber Contraceptives (Male Condoms) Standard Test Method forHexane Extraction of Leather Standard Test Methods forStructural Panels in Tension E1-1995 R(1995) Standard Test Method forDensity or Relative Density of Pure Liquid Chemicals R(2000) Standard Test Method forPilling Resistance and Other Related Surface Changes of Textile Fabrics:Brush Pilling Tester Standard Specification for"Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) PressurePipe Standard Test Method forIn-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Testof a +/-45 Degree Laminate E1-1995 Standard Test Method forMatrix Solids Content of Composite Pregreg

Standard Test Method forVolatiles Content of Composite Material Prepreg

Standard Test Method for ResinFlow of Carbon Fiber- Epoxy Prepreg Standard Test Method for GelTime of Carbon Fiber- Epoxy Prepreg Standard Test Methods for EvaporationRates of Volatile Liquids by Shell Thin-Film Evaporometer R(1996) Standard Guide for ReportingTest Methods and Results on High Modulus Fibers R(1996) Standard Test Method forAlcohol Content and Purity of Acetate Esters by Gas Chromatography Standard Practice forLaboratory Preparation of Soil- Lime Mixtures Using a Mechanical MixerE1-1997 R(1996) Test Method for TensileProperties of Fiber-Reinforced Metal Matrix Composites E1-2000 Standard Test Method for FiberContent by Digestion of Reinforced Metal Matrix Composites R(1996) Standard Test Methods for Leadin Water Standard Practice forDetermining Dimensions of "Fiberglass" (Glass-Fiber-Reinforced ThermosettingResin) Pipe and Fittings Standard Test Methods forFlexible Cellular Materials - Slab, Bonded, and Molded Urethane Foams Standard Test Methods forFlexible Cellular Materials Made from Olefin Polymers Standard Specification forRubber Surgical Gloves Standard Specification forRubber Examination Gloves Standard Specification forRubber Surgical Drainage Tubes, Penrose-Type E1-1999 R(1999)

Standard Specification forPolychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film Standard Practice forAccelerated Aging of Pressure- Sensitive Tapes R(1998) Standard Practice for Samplingand Analysis of New Built-Up Roof Membranes E1-1994 R(1994) Standard Test Method forTesting Antifouling Panels in Shallow Submergence R(1998) Standard Test Method for LowConcentrations of Mercury in Paint by Atomic Absorption Spectroscopy R(1999) Standard Test Method for TraceChloride Ion in Engine Coolants Standard Test Method forThickness of Pressure- Sensitive and Gummed Tapes R(1999)

Standard Test Methods forShear Adhesion of Pressure- Sensitive Tapes E1: 2000

Standard Specification forInsect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns Standard Specification forMinimum Requirements for Agencies Testing and Inspecting Road and PavingMaterials Standard Specification forRubber Seals Used in Flat- Plate Solar Collectors R(2000) Standard Test Method forBearing Ratio of Laboratory Compacted Soil-Lime Mixtures R(1985) Standard Test Methods forRubber-Identification by Infrared Spectrophotometry Standard PerformanceSpecification for Woven, Lace, and Knit Household Curtain and Drapery Fabrics Standard Specification forKerosine Standard Test Method forHydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear MagneticResonance Spectrometry IP Designation: 338/98 Standard Test Method forPeroxide Number of Aviation Turbine Fuels Standard Practice for QualityAssurance of Pressure- Sensitive Tapes

Standard Test Method for LowConcentrations of Chromium in Paint by Atomic Absorption Spectroscopy R(1999) Standard Test Method forSemiquantitative Determination of Fish Oil in Drying Oils and Drying OilFatty Acids by Gas-Liquid Chromatography R(1998) Standard Practice forReporting Cure Times of Ultraviolet-Cured Coatings E1-1996 R(1996) Standard Specification forHigh-Flash Aromatic Naphthas Standard Specification forRubber-Coated Cloth Hospital Sheeting R(2000) Standard Practice for MinimumRequirements for Agencies Engaged in the Testing and/or Inspection of Soiland Rock as Used in Engineering Design and Construction Standard Test Method for TensileStrength and Elongation of Pressure-Sensitive Tapes E1-1997

Standard Test Method for TotalFluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method Standard Practice for Rubber -Measurement of Dimensions

Standard Specification forRubber Finger Cots Standard Test Methods forLength of Woven Fabric E1- 1996 R(1996) Standard Test Methods forWidth of Textile Fabric Standard Test Method forFabric Count of Woven Fabric Standard Test Method for MassPer Unit Area (Weight) of Fabric Standard Test Method forVolatile Matter (Moisture) of Leather by Oven Drying R(1996) Standard Test Method for WaterContent of Coatings by Direct Injection into a Gas Chromatograph Standard Test Method forDensity of High-Modulus Fibers Standard Test Method forUnwind Force of Pressure- Sensitive Tapes E1-1997

Standard Test Method for Curling,Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes

Standard Practice forAccelerated Weathering of Pressure-Sensitive Tapes by Carbon-Arc ExposureApparatus

Standard Test Methods forFlash Point by Small Scale Closed Tester IP Designation: 303/83 (88) Standard Specification forRubber Seals Contacting Liquids in Solar Energy Systems E1-1998 R(1997) Standard Test Method for WaterVapor Transmission of Pressure-Sensitive Tapes E1-1997

Standard Practice forUnderground Installation of "Fiberglass" (Glass-Fiber-ReinforcedThermosetting- Resin) Pipe Standard Specification forGlass-Fiber-Reinforced Polyester Plastic Panels Standard Test Method forin-Plane Shear Strength of Reinforced Plastics Standard Test Method for RapidThermal Degradation of Solid Electrical Insulating Materials byThermogravimetric Method (TGA) R(2000) Standard Terminology forComposite Materials Standard Specification forTolerances for Knitted Fabrics Standard Practice forPackaging/Packing of Plastics R(1998) Standard Specification forAsphalt Roll Roofing (Glass Felt) Surfaced with Mineral Granules Standard Practices for Design,Testing, and Construction of Slurry Seal Standard Test Method forTensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod Standard Test Method for Oiland Grease and Petroleum Hydrocarbons in Water Standard Specification forStandard Environment for Conditioning and Testing Paint, Varnish, Lacquer,and Related Materials R(1996) Standard Practice for SamplingLiquid Paints and Related Pigmented Coatings R(1996) Standard Specification forPolycarbonate (PC) Unfilled and Reinforced Material Standard Test Method for FlashPoint by the Equilibrium Method with a Closed-Cup Apparatus E1-1996 R(1996) Standard Test Method forDetermining Water Separation Characteristics of Aviation Turbine Fuels byPortable Separometer

Standard Specification forStrapping, Nonmetallic (and Joining Methods) Standard Practice forCommercial Packaging Standard Specification for Strapping,Flat Steel and Seals Standard Practice forDetermining Volatile Organic Compound (VOC) Content of Paints and RelatedCoatings Standard Terminology Relatingto Fabric Defects Standard Classification Systemfor Specifying Plastic Materials Standard Test Methods forRubber - Determination of Metal Content by Flame Atomic Absorption (AAS)Analysis R(1998) Standard Test Method for Waterin Crude Oil by Distillation API Designation: Chapter 10.2 (MPMS); IPDesignation: 358/97; E1-2000 R(2000) Standard Test Method for Waterin Paints and Paint Materials by Karl Fischer Method Standard Test Methods forProperties of Continuous Filament Carbon and Graphite Fiber Tows Standard Test Method forMoisture in Plastics by Coulometric Regeneration of Phosphorus Pentoxide Standard Specification forUltra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials Standard Specification forCoal Tar Roof Cement, Asbestos Containing E1 R(2000) Standard Test Method forPhosphorus in Lubricating Oils and Additives by Quinoline PhosphomolybdateMethod Standard Test Method forDetection of Copper Corrosion from Lubricating Grease Standard Test Method forDensity and Relative Density of Liquids by Digital Density Meter IPDesignation: 365/84(86) Standard Practice for ManualSampling of Petroleum and Petroleum Products IP Designation: IMPMS (Chapter8.1) R(2000) Standard Test Method forAbrasion Resistance of Organic Coatings by the Taber Abraser Standard Practice forDetermining and Reporting Dynamic Mechanical Properties of Plastics Standard Classification Systemfor Nylon Injection and Extrusion Materials (PA) Standard Specification forReinforced and Filled Polyphenylene Sulfide (PPS) Injection Molding andExtrusion Materials Standard Test Methods forCompounding Materials - Flame Atomic Absorption Technique - Determination ofMetals R(1997) Standard Specification forTrichloroethylene, Technical and Vapor-Degreasing Grade Standard Practice forDescription of Frozen Soils (Visual-Manual Procedure) E2-1999 R(1994) Standard Terminology Relatingto Dynamic Mechanical Measurements on Plastics Standard Specification forContact-Molded Glass-Fiber- Reinforced Thermoset Resin Corrosion-Resistant TanksE1-1996; E2, E3-1999 Standard Specification forPolypropylene Injection and Extrusion Materials Standard Test Method forThermal Oxidative Resistance of Carbon Fibers R(1999) Standard Specification forVapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane (Withdrawn) Standard TestMethod for Abrasion Resistance of Textile Fabrics (Oscillatory CylinderMethod)

Standard Practice forPerformance Testing of Shipping Containers and Systems E1-2000 Standard Test Method for WearPreventive Characteristics of Lubricating Fluid (Four-Ball Method) R(1999) Standard Terminology Relatingto Petroleum, Petroleum Products, and Lubricants E1: 2000 Standard Test Method for FreeWater and Particulate Contamination in Distillate Fuels (Visual InspectionProcedures) R(1997) Standard Practice forAutomatic Sampling of Petroleum and Petroleum Products IP Designation: MPMSChapter 8.2 R(2000) Standard Classification forAcetal (POM) Molding and Extrusion Materials Standard Specification forStyrene-Acrylonitrile (SAN) Injection and Extrusion Materials Standard Test Methods forEvaluating the Degree of Chalking of Exterior Paint Films Standard Specification forRigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(VinylChloride) (CPVC) Building Products Compounds Standard Practices forPreserving and Transporting Soil Samples R(2000) Standard Specification forStyrene-Butadiene Sheeting Standard Test Methods forSulfur in the Analysis Sample of Coal and Coke Using High-Temperature TubeFurnace Combustion Methods Standard Test Methods forMaximum Index Density and Unit Weight of Soils Using a Vibratory Table Standard Test Methods forMinimum Index Density and Unit Weight of Soils and Calculation of RelativeDensity Standard Guide for TestingInplane Shear Properties of Composite Laminates E1-1994 R(1994)

Standard Test Method forIndicating Moisture in Concrete by the Plastic Sheet Method R(1999) Standard Test Methods forTesting Fiber Ropes Standard Test Method forHigh-Shear Viscosity Using a Cone/Plate Viscometer Standard Test Method forElastomer Compatibility of Lubricating Greases and Fluids Standard Test Method forSulfur in Petroleum Products by Energy-Dispersive X-Ray FluorescenceSpectrometry Standard Test Methods forAbility of Adhesive Films to Support or Resist the Growth of Fungi Standard Practice for AviationFuel Sample Containers for Tests Affected by Trace Contamination Standard Specification forPolyvinyl Acetate-Based Emulsion Adhesives Standard Test Methods forLiquid Limit, Plastic Limit, and Plasticity Index of Soils Standard Test Methods forNonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes Standard Test Method forFlexibility Determination of Supported Adhesive Films by Mandrel Bend Standard Test Method forCorrosivity Index of Plastics and Fillers Standard Test Method forDeterioration of Geotextiles from Exposure to Ultraviolet Light and Water(XenonArc Type Apparatus) Standard Test Method for Waterin Crude Oils by Potentiometric Karl Fischer Titration API Designation: MPMSChapter 10.7; IP Designation: 356/93 Standard Specification forNonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes Standard Specification forPolyethylene Sheeting for Construction, Industrial, and AgriculturalApplications Standard Test Method for ViscosityDeterminations of Unfilled Asphalts Using the Brookfield Thermosel ApparatusE1-2000 R(2000)

Standard Test Methods forField Measurement of Surface Profile of Blast Cleaned Steel R(1999) Standard Classification ofPeat Samples by Laboratory Testing R(1997) Standard Test Method for CBR(California Bearing Ratio) of Soils in Place Standard Specification forPoly(Vinyl Chloride) Sheet Roofing Standard Test Methods forDirect Moisture Content Measurement of Wood and Wood-Base MaterialsSupersedes D2016 Along with D4444; E1-1997 R(1997) Standard Test Methods for Useand Calibration of Hand- Held Moisture Meters E1-1998 R(1998) Standard Practice forMeasuring the Cure Behavior of Thermosetting Resins Using Dynamic MechanicalProcedures Standard Specification forAsphalt Roof Coatings - Asbestos-Free Standard Test Methods forWater Permeability of Geotextiles by Permittivity Standard Test Method forDetermining Grit, Lumps, or Undissolved Matter in Water-Borne Adhesives Standard Specification forThermoplastic Polyester (TPES) Materials Standard Test Method forDetermination of Carbon Residue (Micro Method) Standard Test Method forTrapezoid Tearing Strength of Geotextiles R(1996) Standard Specification forPolystyrene and Rubber- Modified Polystyrene Molding and Extrusion Materials Standard Specification forAsphalt Roof Cement, Asbestos-Free Standard Specification forAsphalt-Coated Glass Fiber Base Sheet Used in Roofing Standard Specification forn-Butyl Acetate (All Grades) Standard Specification forPhenolic Compounds (PF) Standard Test Method forMeasuring Apparent Viscosity by Capillary Viscometer at High-Temperature andHigh- Shear Rates R(1998) Standard Test Method forDistillate Fuel Storage Stability at 43 Degrees C (110 Degrees F) IPDesignation: 378/87 R(1998) Standard Test Method forAnalysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oilsby Atomic Absorption Spectrometry Standard Test Method for TraceNitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet OxidativeCombustion and Chemiluminescence Detection IP Designation: 379/88 Standard Specification forStyrene-Maleic Anhydride Materials (S/MA) Standard Test Method forCorrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft TurbineEngine Lubricants, and Other Highly Refined Oils Standard Specification forEPDM Sheet Used in Single- Ply Roof Membrane Standard Test Method forDetermination of Water (Moisture) Content of Soil by the Microwave OvenMethod Standard Test Method for TotalChlorides in Leather R(1998) Standard Test Methods forSulfates in Leather (Total, Neutral, and Combined Acid) Standard Classification Systemfor Acrylonitrile- Butadiene-Styrene (ABS) Plastics and Alloys Molding andExtrusion Materials Standard Guide for Selectionand Use of Flat Strapping Materials Standard Test Method forMeasuring Viscosity at High Shear Rate and High Temperature by TaperedBearing Simulator

Standard Test Method forDetermination of Yield Stress and Apparent Viscosity of Engine Oils at LowTemperature E1-2000 Standard Specification forAdhesive, Casein-Type Standard Specification forUrea-Formaldehyde Resin Adhesives Standard Specification forTechnical Grade Methylene Chloride Standard Test Method forTearing Strength, Tongue Tear of Leather Standard Test Method forStitch Tear Strength of Leather, Double Hole Standard Specification forCorrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

Standard Test Method forCalculated Cetane Index by Four Variable Equation IP Designation: 380/94 Standard Test Method forMeasuring Viscosity at High Temperature and High Shear Rate by TaperedPlugViscometer Standard Specification forFilled Compounds of Polytetrafluoroethylene (PTFE) Molding and ExtrusionMaterials Standard Test Method forPerforming the Sieve Analysis of Coal and Designating Coal Size Replaces ASTMD310- 88, D311-84, D410-84, D431-84; E1-1994 R(1994) Standard Test Method forDetermining Apparent Opening Size of a Geotextile Standard Practice forDetermining the Specification Conformance of Geosynthetics R(1996) Standard Test Methods forResistance of Adhesive Preparations in Container to Attack by Bacteria,Yeast, and Fungi Standard Test Method forStitch Tear Strength, Single Hole Standard Test Method for FlatParticles, Elongated Particles, or Flat and Elongated Particles in CoarseAggregate Standard Specification forPolyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater Standard Specification forPoly(Methyl Methacrylate) Acrylic Plastic Sheet Standard Test Method forSediment in Crude Oil by Membrane Filtration API Designation: MPMS (Chapter10.8) R(1999) Standard Test Methods forHydrogen Content of Light Distillates, Middle Distillates, Gas Oils, andResidua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy Standard Test Method for Heatof Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (PrecisionMethod) Standard Specification forAutomotive Spark-Ignition Engine Fuel Standard Test Method forDetermination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4Alcohols in Gasoline by Gas Chromatography Standard Test Method forBuckle Tear Strength of Leather Standard Test Method for IndexPuncture Resistance of Geotextiles, Geomembranes, and Related Products Standard Test Method forDetermination of the Ability of Lubricants to Minimize Ring Sticking andPiston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outb Standard Test Method forDetermination of the Tendency of Lubricants to Promote Preignition inTwo-StrokeCycle Gasoline Engines

Standard Specification forLubricants for Two-Stroke- Cycle Spark-Ignition Gasoline Engines-TC Standard Test Method forDetermination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants Standard Test Method forDensity of Solid Pitch (Helium Pycnometer Method) E1-1999 R(1999) Standard Specification forAsphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing Standard Test Method forInsoluble Contamination of Hydraulic Fluids by Gravimetric Analysis E12000R(2000) Standard Specification forTesting of Hazardous Materials Packagings R(1997) Standard Test Methods forElemental Analysis of Lubricant and Additive Components - Barium, Calcium,Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluor Standard Test Methods forWater in Crude Oils by Coulometric Karl Fischer Titration API Designation:MPMS Chapter 10.9; IP Designation: 386/99 Standard Test Method forDetermination of Additive Elements in Lubricating Oils by Inductively CoupledPlasma Atomic Emission Spectrometry Standard Test Method forQualitative Analysis for Active Sulfur Species in Fuels and Solvents (DoctorTest) Standard Specification forRetroreflective Sheeting for Traffic Control Standard Specification forPolyethylene Plastics Molding and Extrusion Materials Standard Specification for LowSilicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiringa Pre-Charge of Supplemental Coolant Additive (SCA) Standard Test Method forMeasurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels Standard Test Method forBreaking Strength and Elongation of Textile Fabrics (Grab Test) Standard Test Method forBreaking Force and Elongation of Textile Fabrics (Strip Method) Standard Test Methods for AshContent of Adhesives E1- 1997 R(1997) Standard Test Method forPermeability of Leather to Water Vapor

Standard Test Method forColorfastness of Crocking of Leather Standard Test Methods for Leadin Gasoline by X-Ray Spectroscopy IP Designation: 228/79; FSC 9130; Should BeUsed Instead of ASTM-D3229, Which Was Cancelled on August Standard Test Method forShrinkage of Textile Fibers (Single-Fiber Test) Standard Practice forPerforming Accelerated Outdoor Weathering of Pressure-Sensitive Tapes UsingConcentrated Natural Sunlight R(1999) Standard Practice forFabrication of Fiberboard Shipping Boxes

Standard Test Method forEvaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine Standard Test Method forDetection of Holes in Medical Gloves Standard Practice forFabrication and Closure of Triple-Wall Corrugated Fiberboard Containers Standard Test Method forDetermination of Additive Elements, Wear Metals, and Contaminants in UsedLubricating Oils and Determination of Selected Elements in Base Oil Standard Test Method for VaporPressure of Petroleum Products (Mini Method) Standard Classification Systemfor Polyamide-Imide (PAI) Molding and Extrusion Materials FSC 9330; Should BeUsed Instead of MIL-P-46179A, Which Was Cancelled on 27 J Standard Classification Systemfor Polyetherimide (PEI) Materials

Standard Specification forPolymeric Resin Film for Electrical Insulation and Dielectric Applications Standard Test Method forMoisture Absorption Properties and Equilibrium Conditioning of Polymer MatrixComposite Materials E1 R(1998) Standard Test Method forMeasurement of Resin Content and Other Related Properties of Polymer MatrixThermoset Prepreg by Combined Mechanical and Ultrasonic Methods Standard Test Method forAssessing Distillate Fuel Storage Stability by Oxygen Overpressure Standard Specification forPressure-Sensitive Tape for Packaging, Filament-Reinforced

Standard Specification forCast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes Standard Practice forPictorial Markings for Handling of Goods Standard Test Method for InplaneShear Properties of Hoop Wound Polymer Matrix Composite Cylinders R(2000) Standard Test Method forTransverse Tensile Properties of Hoop Wound Polymer Matrix CompositeCylinders R(2000) Standard Test Method for ParticulateContamination in Aviation Fuels by Laboratory Filtration IP Designation:423/97 Standard Test Methods forThermal Transmission Properties of Thin Thermally Conductive Solid ElectricalInsulation Materials Standard Specification forPressure-Sensitive Tape for Packaging, Box Closure, and Sealing E1-2000

Standard Specification forHalon 1301, Bromotrifluoromethane (CF3Br) Replaces ES24-93 Standard Specification forEmulsified Refined Coal Tar (Mineral Colloid Type) Standard Guide for SourceReduction Reuse, Recycling, and Disposal of Solid and Corrugated Fiberboard(Cardboard) Standard Specification forMolding Compounds, Thermosetting E1-1996 Standard Specification forTechnical Grade Ethylene Dichloride Standard Test Method forDetermination of Resistance of Leather to Bleeding Standard Test Method forDetermination of Magnesium Sulfate (Epsom Salt) in Leather Standard Test Method forDetermining the Presence of Lead Salts in Leather Standard Practice forCalculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage Standard Specification forCrates, Wood, Open and Covered

Standard Test Method forCracking Resistance of Leather Standard Test Method forShrinkage Temperature of Leather Standard Specification forStop-Leak Additive for Engine Coolants Used in Light Duty Service Should BeUsed Instead of MIL-C-51047B, which Was Cancelled on 11 Septemb Standard Test Method forBlocking

Standard Test Method forTackiness of Finish on Leather Standard Practice for Stitchesand Seams Standard Practice for Qualityof Wood Members of Containers and Pallets E1-1999 Standard Specification forFlexible Cellular Rubber Chemically Blown Specification for WeldingProcedure and Performance Qualification Recommended Practices forResistance Welding Recommended Practices forResistance Welding Coated Low Carbon Steels R(1987) Structural Welding Code -Steel Structural Welding CodeAluminum Structural Welding Code - SheetSteel Structural Welding Code -Reinforcing Steel Specification for BareElectrodes and Rods for Surfacing R(1989) Standard Symbols for Welding,Brazing, and Nondestructive Examination Standard for Brazing Procedureand Performance Qualification Guide for Thermal-SprayOperator Qualification Standard Welding Terms andDefinitions Including Terms for Brazing, Soldering Thermal Spraying andThermal Cutting Standard Method for Evaluatingthe Strength of Brazed Joints in Shear R(1992) Specification for TorchBrazing Specification for InductionBrazing Specification for FurnaceBrazing Specification for AluminumBrazing Specification for UnderwaterWelding Standard Procedures forCalibrating Magnetic Instruments to Measure the Delta Ferrite Content ofAustenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal Standard Methods for Determinationof the Diffusible Hydrogen Content of Martensitic, Bainitic, and FerriticSteel Weld Metal Produced by Arc Welding Standard Methods forMechanical Testing of Welds Specification for Carbon SteelElectrodes for Shielded Metal Arc Welding Filler Metal ProcurementGuidelines Specification for Carbon andLow Alloy Steel Rods for Oxyfuel Gas Welding Specification for Aluminum andAluminum-Alloy Electrodes for Shielded Metal Arc Welding Specification for Stainless SteelElectrodes for Shielded Metal Arc Welding Supersedes SAE AMS 5777 Specification for Low-AlloySteel Electrodes for Shielded Metal Arc Welding Specification for CoveredCopper and Copper Alloy Arc Welding Electrodes R(1991) Specification for Copper andCopper Alloy Bare Welding Rods and Electrodes R(1991) Specification for FillerMetals for Brazing and Braze Welding Specification for BareStainless Steel Welding Electrodes and Rods Specification for BareAluminum and Aluminum-Alloy Welding Electrodes and Rods Specification for Nickel andNickel-Alloy Welding Electrodes for Shielded Metal Arc Welding

Specification for Tungsten andTungsten-Alloy Electrodes for Arc Welding and Cutting Specification for SurfacingElectrodes for Shielded Metal Arc Welding Specification for Nickel andNickel-Alloy Bare Welding Electrodes and Rods Specification for Welding Electrodesand Rods for Cast Iron Specification for Titanium andTitanium Alloy Welding Electrodes and Rods Specification for Carbon SteelElectrodes and Fluxes for Submerged Arc Welding Specification for Carbon SteelElectrodes and Rods for Gas Shielded Arc Welding Specification for MagnesiumAlloy Welding Electrodes and Rods Specification for Carbon SteelElectrodes for Flux Cored Arc Welding Specification for Stainless SteelElectrodes for Flux Cored Arc Welding and Stainless Steel Flux Cored Rods forGas Tungsten Arc Welding Specification for Low AlloySteel Electrodes and Fluxes for Submerged Arc Welding Specification for Zirconiumand Zirconium Alloy Welding Electrodes and Rods Specification for Carbon andLow-Alloy Steel Electrodes and Fluxes for Electroslag Welding Specification for Carbon andLow-Alloy Steel Electrodes and Electrogas Welding Specification for Low-AlloySteel Electrodes and Rods for Gas Shielded Arc Welding Specification for Low-AlloySteel Electrodes for Flux Cored Arc Welding Specification for ConsumableInserts Recommended Practices for StudWelding Recommended Practices for GasTungsten Arc Welding R(1994) Sheet Metal Welding Code Specification for Welding ofIndustrial and Mill Cranes and Other Material Handling Equipment Specification for WeldingEarthmoving and Construction Equipment Specification for Welding ofRotating Elements of Equipment Railroad Welding Specification- Cars and Locomotives Safety in Welding, Cutting andAllied Processes (Withdrawn) Work Practices forAsbestos-Cement Pipe Steel Pipe - A Guide forDesign and Installation Third Edition Cement-Mortar ProtectiveLining and Coating for Steel Water Pipe - 4 in. (100 mm) and Larger - ShopApplied Cold-Water Meters - CompoundType PVC Pipe - Design andInstallation Welded Steel Tanks for WaterStorage Coating Steel Water-StorageTanks

Cement-Mortar Lining forDuctile-Iron Pipe and Fittings for Water Polyethylene Encasement forDuctile-Iron Pipe Systems Ductile-Iron and Gray-IronFittings, 3 in. Through 48 in. (76 mm Through 1219 mm), for Water Erratum:October 1999 Rubber-Gasket Joints forDuctile-Iron Pressure Pipe and Fittings Flanged Ductile-Iron Pipe withDuctile-Iron or Gray- Iron Threaded Flanges Ductile-Iron Pipe,Centrifugally Cast, for Water Ductile-Iron Compact Fittings,for Water Service Steel Water Pipe - 6 in. (150mm) and Larger Coal-Tar Protective Coatingsand Linings for Steel Water Pipelines - Enamel and Tape - Hot Applied AddendaC203a - 1999 Field Welding of Steel Water Pipe Steel Pipe Flanges forWaterworks Service - Sizes 4 in. Through 144 in. (100 mm Through 3,600 mm)Erratum December 1994 Dimensions for FabricatedSteel Water Pipe Fittings Cold-Applied Tape Coatings forthe Exterior of Special Sections, Connections, and Fittings for Steel WaterPipelines Liquid-Epoxy Coating Systemsfor the Interior and Exterior of Steel Water Pipelines Fusion-Bonded Epoxy Coatingfor the Interior and Exterior of Steel Water Pipelines Tape Coating Systems for theExterior of Steel Water Pipelines Hypochlorites Reinforced Concrete PressurePipe, Steel-Cylinder Type Liquid Chlorine Prestressed Concrete PressurePipe, Steel-Cylinder Type Erratum - January 2000 Reinforced Concrete PressurePipe, Noncylinder Type Concrete Presure Pipe,Bar-Wrapped, Steel-Cylinder Type Asbestos-Cement Pressure Pipe,4 in. Through 16 in. (100 mm Through 400 mm), for Water Distribution Systems Asbestos-Cement TransmissionPipe, 18 in. Through 42 in. (450 mm Through 1,050 mm), for Water SupplyService Selection of Asbestos-CementTransmission Pipe, Sizes 18 in. Through 42 in. (450 mm Through 1,050 mm), forWater Supply Service Metal-Seated Gate Valves forWater Supply Service; Addendum C500A - 1995 Sodium Polyphosphate, Glassy(Sodium Hexametaphosphate) Addendum B502A 1997 Dry-Barrel Fire Hydrants IncorporatesAddendum C502A-95 Wet-Barrel Fire Hydrants Rubber-Seated Butterfly Valves Swing-Check Valves forWaterworks Service, 2 in. (50 mm) Through 24 in. (600 mm) NPS

Resilient-Seated Gate Valvesfor Water Supply Service Addendum C509A-95 Double Check Valve BackflowPrevention Assembly Reduced-Pressure PrincipleBackflow Prevention Assembly Protective Epoxy InteriorCoatings for Valves and Hydrants Installation of Ductile-IronWater Mains and Their Appurtenances Installation ofAsbestos-Cement Pressure Pipe R(2000) Grooved and Shouldered Joints Disinfecting Water Mains Disinfection of Water- StorageFacilities Cold-Water Meters - DisplacementType, Bronze Main Case First Edition Cold-Water Meters - TurbineType, for Customer Service Cold-Water Meters - FireService Type Propeller-Type Meters forWaterworks Applications Second Edition Underground Service LineValves and Fittings Polyvinyl Chloride (PVC)Pressure Pipe and Fabricated Fittings, 4 in. Through 12 in.(100 mm Through300 mm), for Water Distribution Polyethylene (PE) PressurePipe and Tubing, 1/2 in. (13 mm) Through 3 in, (76 mm), for Water Service Butts and Hinges Bored and Preassembled Locks& Latches Exit Devices (BHMA 701) Door Controls - Closers (BHMA301) Auxiliary Locks &Associated Products (BHMA 501) Architectural Door Trim (BHMA1001) Template Hinge DimensionsR(1997) Door Controls - Overhead Stopsand Holders (BHMA 311) Cabinet Hardware (BHMA 201) Power Operated PedestrianDoors Cabinet Locks Interconnected Locks &Latches Mortise Locks & Latches(BHMA 621) Sliding & Folding DoorHardware Closer Holder Release Devices(Revision of: ANSI A156.15-1986) Auxiliary Hardware Self Closing Hinges &Pivots Materials and Finishes (BHMA1301)

Power Assist and Low EnergyPower Operated Doors Strap and Tee Hinges and HaspsR(1996) Thresholds Electromagnetic Locks Delayed Egress Locks Referenced Standards EighthEdition

Basic Principles EighthEdition

Sizing the Building WaterSupply Distribution System Eighth Edition

Rates of Rainfall for VariousCities a (in./hr) Eighth Edition

Tables, Rules and ConversionCalculations Eighth Edition

Gas Piping Systems EighthEdition

Index Eighth Edition Administration and EnforcementEighth Edition

Definitions Eighth Edition

General Regulations EighthEdition

Materials Eighth Edition

Joints and Connections EighthEdition

Sanitary Drainage SystemsEighth Edition

Indirect Waste Piping andSpecial Waste Eighth Edition

Storm Drainage Systems EighthEdition

Vents and Venting EighthEdition

Traps, Interceptors,Separators, and Backwater Valves Eighth Edition

Drainage Pipe Cleanouts EighthEdition

Plumbing Fixtures EighthEdition

Hangers and Supports EighthEdition

Health Care Plumbing EighthEdition

Water Supply and DistributionEighth Edition

Individual Water Supply EighthEdition

Inspection, Tests andMaintenance Eighth Edition

Engineered Plumbing SystemsEighth Edition

BOCA National PlumbingCode/1990 Eighth Edition

BOCA National PlumbingCode/1990 Eighth Edition

Safety Requirements forAbrading Materials with Coated Abrasives Systems "V" Blocks andClamps, Standard for Fiber Ropes: General Standard Polypropylene: 3 and 8 Strand PET/Polypro Combo: 3 Strand Nylon Polyamide: 3 and 8Strand Polyester (PET): 3 and 8Strand Polyester SB: 12 Strand Braid Nylon DB: Double Braid Polyester DB: Double Braid Manilla: 3 Strand Standard Specification forHubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Wasteand Vent Piping Applications Masterformat: Master List ofTitles and Numbers for the Construction Industry (Pressure Vessels) Section Format (PressureVessels) Page Format (Pressure Vessels) Acceptance Test Code for WaterCooling Towers (CTI Code Tower Standard Specifications) (Withdrawn) Standard SteelDoor and Steel Frame Preparation for Floor Closers Light Duty, Center Hung,Single or Double Acting; Center Hung, Single of Double Acting; Guidelines for Using PlasticEncapsulated Microcircuits and Semiconductors in Military, Aerospace andOther Rugged Applications Requirements for ElectronicGrade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for ElectronicSoldering Applications Amendment 1 - August 1996 (Withdrawn) FOTP-83 Cable toInterconnecting Device Axial Compressive Loading Withdrawn - April 1995; *NOTCURRENT DOCUMENT (Withdrawn) FOTP-29 RefractiveIndex Profile, Transverse Interference Method Formerly Standards Proposal No.4537 FOTP-171 Attenuation bySubstitution Measurement for Short-Length Multimode Graded-Index and SingleMode Optical Fiber Cable Assemblies Upgrade and Revision of TIA/EI (Withdrawn) Guidance for theSelection of Critical Manufacturing Operations for Use in Implementing an SPCSystem for Passive Components

IC Latch-Up Test Errata -January 1998 Electrical PerformanceStandards - Monochrome Television Studio Facilities One-Inch Perforated TapeR(1993) Interface between DataTerminal Equipment and Data Circuit-Terminating Equipment Employing SerialBinary Data Interchange Axis and Motion Nomenclaturefor Numerically Controlled Machines Interchangeable Variable BlockData Format for Positioning, Contouring, and Contouring/PositioningNumerically Controlled Machines R(1988) Mounting Dimensions forLoudspeakers Cable Connectors for AudioFacilities for Radio Broadcasting Correction Sheet Cabinets, Racks, Panels, andAssociated Equipment Electrical PerformanceStandards for High Resolution Monochrome Closed Circuit Television Camera American National StandardCode for Information Interchange for Numerical Machine Control Standard Colors for ColorIdentification and Coding Special Colors TP-07B Contact AxialConcentricity Test Procedure for Electrical Connectors TP-11A Resistance to SolventsTest Procedure for Electrical Connectors and Sockets TP-35A Insert Retention TestProcedure for Electrical Connectors R(1990) TP-56 Resistance to SolderingHeat Test Procedure for Electrical Connectors TP-05B Contact Insertion,Release and Removal Force Test Procedure for Electrical Connectors FSC 5935;Should Be Used Instead of MIL-STD-1344, Method 2012.1 TP-08B Crimp Tensile StrengthTest Procedure for Electrical Connectors FSC 5935; Should Be Used Instead ofMIL-STD-1344, Method 2003.1 TP-24B Maintenance Aging TestProcedure for Electrical Connectors FSC 5935; Should Be Used Instead ofMIL-STD- 1344, Method 2002.1 TP-25C Probe Damage TestProcedure for Electrical Connectors FSC 5935; Should Be Used Instead ofMILSTD- 1344, Method 2006.1 TP-29B Contact Retention TestProcedure for Electrical Connectors FSC 5935; Should Be Used Instead ofMILSTD- 1344, Method 2007.1 TP-37B Contact Engagement andSeparation Force Test Procedure for Electrical Connectors FSC 5935; Should BeUsed Instead of MIL-STD-1344, Method 2014 TP-38B Cable Pull-Out TestProcedure for Electrical Connectors TP-40B Crush Test Procedurefor Electrical Connectors FSC 5935; Should Be Used Instead of MIL-STD1344,Method 2008.1 TP-41C Cable Flexing TestProcedure for Electrical Connectors TP-54A Magnetic Permeabilityfor Test Procedure for Electrical Connectors, Contacts, and Sockets TP-71A Solder Wicking (WaveSolder Technique) Test Procedure for Electrical Connectors and Sockets TP-99 Gage Location andRetention Test Procedure for Electrical Connectors

TP-104A Flammablility TestProcedure for Electrical Connectors TP-105 Altitude - LowTemperature Test Procedure for Electrical Connectors Preferred Values R(1983) Electrical PerformanceStandards for Direct View High Resolution Monochrome Closed CircuitTelevision Monitors Fiber Optic Terminology FOTP-34 Interconnection DeviceInsertion Loss Test FOTP-65 Optical Fiber FlexureTest FOTP-174 Mode Field Diameterof Single-Mode Optical Fiber by Knife-Edge Scanning in the Far Field FOTP-21 Mating Durability ofFiber Optic Interconnecting Devices FOTP-23 Air Leakage Testing ofFiber Optic Component Seals R(1996) FOTP-26 Crush Resistance ofFiber Optic Cable Interconnecting Devices R(1996) FOTP-33 Fiber Optic CableTensile Loading and Bending Test FOTP-88 Fiber Optic Cable BendTest FOTP-91 Fiber Optic CableTwist-Bend Test R(1996) FOTP-179 Inspection of CleavedFiber End Faces by Interferometry FOTP-3 Procedure to MeasureTemperature Cycling Effects on Optical Fibers, Optical Cable, and OtherPassive Fiber Optic Components Replaces 455-52-83 FOTP-6 Cable Retention TestProcedure for Fiber Optic Cable Interconnecting Devices FOTP-14 Fiber Optic ShockTests (Specified Pulse) FOTP-15 Altitude/Immersion ofFiber Optic Components FOTP-22 Ambient LightSusceptibility of Fiber Optic Components FOTP-24 Water Peak AttenuationMeasurement of Single- Mode Fibers FOTP-30 Frequency DomainMeasurement of Multimode Optical Fiber Information Transmission Capacity FOTP-37 Low or HighTemperature Bend Test for Fiber Optic Cable FOTP-42 Optical Crosstalk inFiber Optic Components

FOTP-46 Spectral AttenuationMeasurement for Long- Length, Graded-Index Optical Fibers FOTP-47 Output Far FieldRadiation Pattern Measurement FOTP-48 Measurement of OpticalFiber Cladding Diameter Using Laser-Based Instruments FOTP-51 Pulse DistortionMeasurement of Multimode Glass Optical Fiber Information TransmissionCapacity FOTP-53 Attenuation bySubstitution Measurement for Multimode Graded-Index Optical Fibers or FiberAssemblies Used in Long Length Communications Systems FOTP-58 Core DiameterMeasurement of Graded-Index Optical Fibers FOTP-60 Measurement of Fiberor Cable Length Using an OTDR FOTP-62 Measurement of OpticalFiber Macrobend Attenuation FOTP-77 Procedures to Qualifya Higher-Order Mode Filter for Measurements on Single-Mode Fiber FOTP-78 Spectral-AttenuationCutback Measurement for Single-Mode Optical Fibers R(1998) FOTP-82 Fluid Penetration Testfor Fluid-Blocked Fiber Optic Cable FOTP-127 SpectralCharacterization of Multimode Laser Diodes FOTP-167 Mode Field Diameter,Variable Aperture in the Far Field FOTP-173 Coating GeometryMeasurement for Optical Fiber Side-View Method FOTP-188 Low TemperatureTesting of Fiber Optic Components FOTP-86 Fiber Optic CableJacket Shrinkage FOTP-2 Impact TestMeasurements for Fiber Optic Devices FOTP-4 Fiber Optic ComponentTemperature Life Test FOTP-5 Humidity Test Procedurefor Fiber Optic Components FOTP-16 Salt Spray (Corrosion)Test for Fiber Optic Components R(2000) FOTP-20 Measurement of Changein Optical Transmittance FOTP-25 Repeated ImpactTesting of Fiber Optic Cables and Cable Assemblies

FOTP-28 Measuring DynamicStrength and Fatigue Parameters of Optical Fibers by Tension FOTP-31 Proof Testing OpticalFibers by Tension FOTP-32 Fiber Optic CircuitDiscontinuities R(1999) FOTP-39 Optical Fiber CableWater Wicking Test FOTP-41 Compressive LoadingResistance of Fiber Optic Cables FOTP-43 Output Near-FieldRadiation Pattern Measurement of Optical Waveguide Fibers FOTP-44 Refractive IndexProfile, Refracted Ray Method FOTP-50 Light LaunchConditions for Long-Length Graded- Index Optical Fiber Spectral AttenuationMeasurements FOTP-54 Mode ScramblerRequirements for Overfilled Launching Conditions to Multimode Fibers FOTP-55 End-View Methods forMeasuring Coating and Buffer Geometry of Optical Fibers FOTP-56 Test Method forEvaluating Fungus Resistance of Optical Fiber and Cable FOTP-57 Preparation andExamination of Optical Fiber Endface for Testing Purposes FOTP-58 Core DiameterMeasurement of Graded-Index Optical Fibers Revision of TIA/EIA-455-58A FOTP-67 Procedure forAssessing High Temperature Exposure Effects on Optical Characteristics ofOptical Fibers FOTP-75 Fluid Immersion AgingProcedure for Optical Fiber Mechanical Properties Method for Measuring DynamicFatigue of Optical Fibers by Tension FOTP-80 Measurement of Cut-OffWavelength of Single- Mode Fiber by Transmitted Power FOTP-81 Compound Flow (Drip)Test for Filled Fiber Optic Cable FOTP-84 Jacket Self-Adhesion(Blocking) Test for Optical Fiber Cable R(1998) FOTP-87 Fiber Optic Cable KnotTest R(1999) FOTP-100 Gas Leakage Test forGas-Blocked Fiber Optic Cables R(1999) FOTP-104 Fiber Optic CableCyclic Flexing Test

FOTP-107 Determination ofComponent Reflectance or Link/System Return Loss Using a Loss Test SetRevision of EIA/TIA-455-107 FOTP-168 Chromatic DispersionMeasurement of Multimode Graded-Index and Single-Mode Optical Fibers bySpectral Group Delay Measurement in the Time Domain R(1999) FOTP-175 Chromatic DispersionMeasurement of Single- Mode Optical Fibers by the Differential Phase ShiftMethod FOTP-176 Method for MeasuringOptical Fiber Cross- Sectional Geometry by Automated Grey-Scale Analysis FOTP-177 Numerical ApertureMeasurement of Graded- Index Optical Fibers FOTP-178 Measurements of StripForce for Mechanically Removing Coatings from Optical Fibers FOTP-184 Coupling ProofOverload Test for Fiber Optic Interconnecting Devices R(1999) Fixed Aluminum ElectrolyticCapacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) andfor Standard Duty (Type 2) Group 3 Facsimile Apparatusfor Document Transmission Procedures for DocumentFacsimile Transmission Standard Test Method forDestructive Physical Analysis (DPA) of Ceramic Monolithic Capacitors Telecommunications-TelephoneTerminal Equipment - Performance and Compatibility Requirements for TelephoneSets with Loop Signalling Multi-Line Key TelephoneSystems (KTS) for Voiceband Applications R(1988) Standard Method of Test forEffective Series Resistance (ESR) and Capacitance of Multilayer CeramicCapacitors at High Frequencies Editorially Corrected - February 19 Line Circuit (Card) for 1A2Generic Multi-Line Key Telephone Systems 32 Bit Binary CL (BCL) and 7Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled Machines Standard Methods forMeasurement of the Equivalent Electrical Parameters of Quartz Crystal Units,1 kHz to 1 GHz Standard Methods forMeasurement of the Equivalent Electrical Parameters of Quartz Crystal Units,1 kHz to 1 GHz Sectional Specification forPushbutton Switches of Certified Quality Detail Specification forNonsensitive Pushbutton Switch Single-Pole Contact Detail Specification forNonsensitive Pushbutton Switch Momentary Contact Sectional Specification forSensitive Switches of Certified Quality Blank Detail Specification forSpecial-Use Sensitive Switches of Certified Quality Detail Specification forSensitive Switches, Single Break Contacts, Basic Size

Detail Specification forSensitive Switches, Single Break Contacts, Miniature Size Detail Specification forSensitive Switches, Single Break Contacts, Subminiature Size 5 A Detail Specification forSensitive Switches, Single Break Contacts, Sub-Subminiature Size 7 A OFSTP-4A Optical Eye PatternMeasurement Procedure OFSTP-10 Measurement ofDispersion Power Penalty in Digital Single-Mode Systems R(1998) OFSTP-14 Optical Power LossMeasurements of Installed Multimode Fiber Cable Plant Method Selection forAssessment of Nonconforming Levels in Parts per Million (PPM) Statistical Process ControlSystems Zero Acceptance NumberSampling Procedures and Tables for Inspection by Attributes of a ContinuousManufacturing Process Zero Acceptance NumberSampling Procedures and Tables for Inspection by Attributes of Isolated Lots Optical Fiber Cable ColorCoding Fiber Optic ConnectorIntermateability Standards (FOCIS) R(2000) National Consensus Standardfor Configuration Management Industry Implementation ofInternational Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard forinformation Technology - Software Life Cycle Processes - Life Cycle Industry Implementation ofInternational Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard forInformation Technology - Software Life Cycle Processes - Implementa Generic Specification forSpecial-Use Electromechanical Switches of Certified Quality Weather-Resistant PolyolefinCovered Wire & Cable Communications Wire and Cablefor Wiring of Premises Primary Batteries - Part 1:General Ninth Edition Primary Batteries - Part 2:Physical and Electrical Specifications Tenth Edition Helical-Scan Video TapeCassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS Part 1: VHSand Compact VHS Video Cassette System First Edition; (CENELEC EN Helical-Scan Video TapeCassette System Using 8 mm Magnetic Tape - 8 mm Video Part 1: GeneralSpecifications Second Edition Helical-Scan Video TapeCassette System Using 8 mm Magnetic Tape - 8 mm Video Part 3: HighBandSpecifications for Hi 8 First Edition; CENELEC EN 60843-3: 1993 Helical-Scan Video TapeCassette System Using 12,65 mm (0,5 in) Magnetic Tape on Type VHS CompactVHS Video Cassette First Edition Reference Tapes for Video TapeRecorder Systems First Edition; CENELEC EN 61105: 1993

Standard General Principlesfor Temperature Limits in the Rating of Electric Equipment and for theEvaluation of Electrical Insulation R(1992) Standard for Use of theInternational System of Units (SI): the Modern Metric System Revision andRedesignation of ANSI/IEEE Std 268-1992 and ASTM E380 Code for Electricity Metering8th Edition Revised and Redesignated to ANSI/NEMA C12.1 - 1995 Standard for Mechanical DemandRegisters (ANSI/IEEE) R(1990) American National StandardRequirements for Watthour Meter Sockets (ANSI/IEEE) Instrument Transformers forRevenue Metering, 10 kV BIL Through 350 kV (0.6 kV NSV Through 69 kV NSV) Standard Requirements,Terminology, and Test Procedure for Neutral Grounding Devices R(1991) Graphic Symbols for ElectricalWiring and Layout Diagrams Used in Architecture and Building Construction(ANSI/IEEE) R(1989) Standard Test Procedure for ACHigh-Voltage Circuit Breakers Rated on a Symmetrical Current Basis (ANSI/IEEE) Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a SymmetricalCurrent Basis Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a SymmetricalCurrent Basis Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a SymmetricalCurrent Basis Supplement to IEEE StandardTest Procedure for AC High- Voltage Circuit Breakers Rated on a SymmetricalCurrent Basis Standard for Low-Voltage ACPower Circuit Breakers Used in Enclosures (ANSI/IEEE) Standard for Metal-EnclosedLow-Voltage Power Circuit Breaker Switchgear (ANSI/IEEE) Standard for Metal-CladSwitchgear (ANSI/IEEE) Metal-Enclosed InterrupterSwitchgear (ANSI/IEEE) R(1992) Standard Requirements forHigh-Voltage Switches (ANSI/IEEE) Standard for Relays and RelaySystems Associated with Electric Power Apparatus (ANSI/IEEE) R(1994) Standard Surge WithstandCapability (SWC) Tests for Protective Relays and Relay Systems R(1994) Recommended Practice forTesting Insulation Resistance of Rotating Machinery (ANSI/IEEE) Recommended Practice forElectric Installations on Shipboard Corrections December 17, 1998 Standard Test Procedures andRequirements for Alternating-Current Cable Terminations 2.5 kV Through 765 kV Standard General Requirementsfor Liquid-Immersed Distribution, Power, and Regulating Transformers(ANSI/IEEE) Standard General Requirementsfor Dry-Type Distribution and Power Transformers Including Those withSolidCast and/or Resin-Encapsulated Windings (ANSI/IEEE) Standard Terminology for Powerand Distribution Transformers (ANSI/IEEE) R(1992) Standard Test Code forLiquid-Immersed Distribution, Power, and Regulating Transformers (ANSI/IEEE) Standard Test Code forDry-Type Distribution and Power Transformers Standard Requirements forInstrument Transformers (ANSI/IEEE)

Recommended Practice forInstallation, Application, Operation, and Maintenance of Dry-Type GeneralPurpose Distribution and Power Transformers (ANSI/IEEE) R(1987) Standard for GappedSilicon-Carbide Surge Arresters for AC Power Circuits (ANSI/IEEE) R(1994) Standard for Metal-Oxide SurgeArresters for AC Power Circuits (&T; 1kV) (ANSI/IEEE) IEEE Recommended Practice onSurge Voltages in Low- Voltage AC Power Circuits (ANSI/IEEE) American National StandardDictionary for Technologies of Electromagnetic Compatibility (EMC),Electromagnetic Pulse (EMP), and Electrostatic Discharge (ESD) Guide for Measuring EarthResistivity, Ground Impedance, and Earth Surface Potentials of a GroundSystem Standard Graphic Symbols forLogic Functions Revision of ANSI Y32.14-73 (ANSI/IEEE) R(1994) Supplement to IEEE Standardfor Graphic Symbols and Logic Functions R(1994) Standard for Safety Levelswith Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3kHz to 300 GHz (ANSI/IEEE) Recommended Practice for theMeasurement of Potentially Hazardous Electromagnetic Fields - RF andMicrowave Revision of ANSI C95.3-1973 and ANSI C95.5- 1981 (ANSI/IEE Standard Test Procedure forPolyphase Induction Motors and Generators (ANSI/IEEE) Standard Definitions of Termsfor Antennas (ANSI/IEEE) Audio Program LevelMeasurement Standard on PiezoelectricitySupersedes 177-68, 178- 58, 179-61 American National StandardLetter Symbols for Units of Measurement (SI Units, Customary Inch-PoundUnits, and Certain Other Units) Revision and Redesignation of IEEE Standard Letter Symbols forQuantities Used in Electrical Science and Electrical Engineering Revision ofANSI Y10.5-1968 R(1997) Standard Method for Measuringthe Effectiveness of Electromagnetic Shielding Enclosures Graphic Symbols for Electricaland Electronics Diagrams (Including Reference Designation Class DesignationLetters) CSA Z99-75; Supersedes ANSI Y32.2- 75 (ANSI/IEEE) Supplement to Graphic Symbolsfor Electrical and Electronics Diagrams Supplement to ANSI Y32.2-75 and IEEE315-75 R(1994) Standard for Type Test ofClass IE Electric Cables, Field Splices, and Connections for Nuclear PowerGenerating Stations (ANSI/IEEE) R(1992) Standard for SeparableInsulated Connector Systems for Power Distribution Systems Above 600 V(ANSI/IEEE) Guide for MakingHigh-Direct-Voltage Tests on Power Cable Systems in the Field Standard for Cable Joints forUse with Extruded Dielectric Cable Rated 5000-138 000 V and Cable Joints forUse with Laminated Dielectric Cable Rated 2500-500 000 V Standard Definitions forExcitation Systems for Synchronous Machines Revision of IEEE Std 421-1972R(1996) Guide for InsulationMaintenance for Rotating Electric Machinery (5 hp to Less Than 10 000 hp)(ANSI/IEEE) Standard Test Procedure forMeasuring Longitudinal Balance of Telephone Equipment Operating in the VoiceBand (ANSI/IEEE) R(1992) Standard Letter Designationsfor Radar-Frequency Bands R(1990) Recommended Practice forElectric Systems in Health Care Facilities IEEE White Book Standard Radar Definitions

Recommended Practice forPreferred Metric Units for Use in Electrical and Electronics Science andTechnology R(1997) Standard for Logic CircuitDiagrams R(1994) Information Technology -Portable Operating System Interface (POSIX) - Part 1: System ApplicationProgram Interface (API) (C Language) ISO/IEC 9945-1: 1996 (E); Incor Standard VHDL LanguageReference Manual IEEE Computer Society Document Industry Implementation ofInternational Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard forInformation Technology - Software Life Cycle Processes Industry Implementation ofInternational Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard forInformation Technology - Software Life Cycle Processes - Life Cycl Industry Implementation ofInternational Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard forInformation Technology - Software Life Cycle Processes - Implement Requirements for SolderingFluxes; (Amendment 1 - 1996) Requirements for SolderingPastes; (Amendment 1 - 1996) Requirements for ElectronicGrade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for ElectronicSoldering Applications; (Amendment 1 - 1996) (Withdrawn) Flexible AdhesiveBonding Films (Withdrawn) Glass FabricWeight Renumbered to 2.1.6.1 Terms and Definitions forInterconnecting and Packaging Electronic Circuits Specification for FinishedFabric Woven from "E" Glass for Printed Boards Amended Sheets -December 1991 Specification for FinishedFabric Woven from "S" Glass for Printed Boards Specification for FinishedFabric Woven from Aramid for Printed Boards Specification for FinishedFabric Woven from Quartz (Pure Fused Silica) for Printed Boards Flexible Base Dielectrics forUse in Flexible Printed Wiring Amendment 1:10/00/95 Adhesive Coated DielectricFilms for Use as Cover Sheets for Flexible Printed Wiring and Flexible BondingFilms Revision C Flexible Metal-CladDielectrics for Use in Fabrication of Flexible Printed Wiring Amendment1:10/00/95 Guidelines for SelectingPrinted Wiring Board Sizes Using Standard Panel Sizes R(1991) Computer Numerical ControlFormatting for Drillers and Routers R(1993) Printed Board Description inDigital Form Revision D - July 1992 Bare Substrate Electrical TestData Format Design and End ProductRequirements for Discrete Wiring Boards Test Methods Manual Test Methods Manual Thread Count of Glass Fabric;Revision C - December 1994 (Test Methods Manual) Surface Scratch ExaminationMetal Clad Foil (Test Methods Manual)

Chemical Cleaning of MetalClad Laminate; Revision B - May 1986 (Test Methods Manual) Chemical Resistance ofLaminates, Prepreg, and Coated Foil Products, by Solvent Exposure; Revision ADecember 1994 (Test Methods Manual) Chemical Resistance of CoreMaterials to Methylene Chloride (Test Methods Manual) Cupric Chloride EtchingMethod; Revision A - December 1994 (Test Methods Manual) Flammability of Prepreg andThin Laminate Revision D (Test Methods Manual) Flammability of Laminate;Revision B - December 1994 (Test Methods Manual) Resin Content of Prepreg, byBurn-Off; Revision B - December 1994 (Test Methods Manual) Resin Content of Prepreg, byTreated Weight; Revision C - December 1994 (Test Methods Manual) Resin Flow Percent of PrepregRevision D (Test Methods Manual) Resin Flow of "NoFlow" Prepreg Revision B (Test Methods Manual) Gel Time for PrepregMaterials; Revision A - April 1986 (Test Methods Manual) Volatile Content of Prepreg;Revision C - December 1994 (Test Methods Manual) Flux Induced Corrosion (CopperMirror Method) (Test Methods Manual) Presence of Halides in Flux,Silver Chromate Method Revision C - January 1995 (Test Methods Manual) Solids Content, Flux; RevisionB - January 1995 (Test Methods Manual) Halide Content, Quantitative(Chloride & Bromide); Revision B - January 1995 (Test Methods Manual) Flexural Strength of Laminates(at Ambient Temperature); Revision B - December 1994 (Test Methods Manual) Flexural Strength of Laminates(at Elevated Temperature); Revision A - December 1994 (Test Methods Manual) Peel Strength of Metallic CladLaminates; Revision C - December 1994 (Test Methods Manual) Peel Strength of Metallic CladLaminates at Elevated Temperature (Hot Fluid Method); Revision A December1994 (Test Methods Manual) Glass Transition Temperatureand Z-Axis Thermal Expansion by TMA; Revision C - December 1994 (Test MethodsManual) Glass Transition Temperatureand Cure Factor by DSC; Revision C - December 1994 (Test Methods Manual)

Prepreg Scaled Flow Testing(Test Methods Manual) Dimensional Stability, GlassReinforced Thin Laminates; Revision A - February 1986 (Test Methods Manual) Coefficient of Linear ThermalExpansion of Electrical Insulating Materials (Test Methods Manual) Coefficient of ThermalExpansion by the Vitreous Silica (Quartz) Dilatometer Method Revision A (TestMethods Manual) Arc Resistance of PrintedWiring Material; Revision B - May 1986 (Test Methods Manual) Dielectric Constant and DissipationFactor of Printed Wiring Board Material - Clip Method (Test Methods Manual) Stripline Test forPermittivity and Loss Tangent (Dielectric Constant and Dissipation Factor) atX-Band Revision C (Assembly-Joining Handbook) Stripline Test for ComplexRelative Permittivity of Circuit Board Materials to 14 GHz (AssemblyJoiningHandbook) Permittivity (DielectricConstant) and Loss Tangent (Dissipation Factor) of Materials (Two Fluid CellMethod); Revision C - December 1987 (Test Methods Manual) Dielectric Breakdown of RigidPrinted Wiring Material; Revision B - May 1986 (Test Methods Manual) Electric Strength of PrintedWiring Material Revision A (Test Methods Manual) R(1998) Volume and Surface Resistivityof Dielectric Materials; Revision A - December 1994 (Test Methods Manual) Q Resonance, Flexible PrintedWiring Materials; Revision A - April 1988 (Test Methods Manual) Fungus Resistance PrintedWiring Materials Revision E (Test Methods Manual) Water Absorption, Metal CladPlastic Laminates; Revision A - May 1986 (Test Methods Manual) Moisture and InsulationResistance, Printed Boards Revision E (Test Methods Manual) Surface Insulation Resistance,Fluxes; Revision A - January 1995 (Test Methods Manual) Hydrolytic Stability, FlexiblePrinted Wiring Material (Test Methods Manual) Certification of FacilitiesThat Inspect/Test Printed Boards, Components and Materials Qualification and Performanceof Permanent Solder Mask Generic Standard on PrintedBoard Design Amendment 1: January 2000 Sectional Design Standard forFlexible Printed Boards Supersedes IPC-D-249 Temperature MeasurementThermocouples Photography - DensityMeasurements - Part 4: Geometric Conditions for Reflection Density SecondEdition Aircraft - Fuel Nozzle GroundingPlugs and Sockets First Edition Cylindrical Gears for GeneralEngineering and for Heavy Engineering - Modules Second Edition

Conical Fittings with a 6 %(Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part1: General Requirements First Edition; CEN EN 20594-1: 1993 Conical Fittings with a 6 %(Luer) Taper for Syringes, Needles and Certain Other Medical Equipment - Part2: Lock Fittings Second Edition Series 1 Freight Containers - Classification,Dimensions and Ratings Fifth Edition Freight Containers -Vocabulary Second Edition SI Units and Recommendationsfor the Use of Their Multiples and of Certain Other Units Third Edition;Amendment 1: 11-01-1998 Vocabulary of Gear Terms -Part 1: Definitions Related to Geometry Second Edition; Corrigendum 1:11-01-99 Series 1 Freight Containers -Corner Fittings - Specification Fourth Edition; Corrigendum 1-1990; AS/NZS3711.3: 1993 Rolling Bearings - InstrumentPrecision Bearings First Edition Series 1 Freight Containers -Specification and Testing - Part 1: General Cargo Containers for GeneralPurposes Amendment 1: 1AAA and 1BBB Containers Fifth Edition; A Series 1 Freight Containers -Specification and Testing - Part 2: Thermal Containers Fourth Edition Series 1 Freight Containers -Specification and Testing - Part 3: Tank Containers for Liquids, Gases andPressurized Dry Bulk Fourth Edition; PNS 924-3: 1992 Rolling Bearings - Balls -Dimensions and Tolerances Second Edition Hot-Rolled Carbon Steel Sheetof Commercial and Drawing Qualities Third Edition Cold-Reduced Carbon SteelSheet of Commercial and Drawing Qualities Third Edition Continuous Hot-Dip Zinc-CoatedCarbon Steel Sheet of Commercial, Lock-Forming and Drawing Qualities SecondEdition Rubber Hoses for Sand and GritBlasting - Specification Second Edition Cold-Reduced Carbon SteelStrip with a Carbon Content over 0,25% Second Edition Hot-Rolled Steel Sheet ofStructural Quality Third Edition Hot-Rolled Steel Sheet of HighYield Stress Structural Quality Third Edition Cold-Reduced Steel Sheet ofStructural Quality Third Edition Continuous Hot-Dip Zinc-CoatedCarbon Steel Sheet of Structural Quality Third Edition Continuous Hot-Dip Terne (LeadAlloy) Coated Cold- Reduced Carbon Steel Sheet of Commercial, Drawing andStructural Qualities Third Edition Continuous Hot-DipAluminium/Silicon-Coated Cold- Reduced Carbon Steel Sheet of Commercial andDrawing Qualities Second Edition Cold-Reduced Carbon SteelSheet for Vitreous Enamelling Third Edition Hot-Rolled and Cold-ReducedElectrolytic Zinc-Coated Carbon Steel Sheet of Commercial and DrawingQualities First Edition Continuous ElectrolyticTin-Coated Cold-Reduced Carbon Steel Sheet of Commercial and DrawingQualities Third Edition Hot-Rolled Steel Sheet ofHigher Yield Strength with Improved Formability Second Edition; (Correctedand Reprinted - 1994) Continuously Hot-Rolled SteelSheet of Structural Quality with Improved Atmospheric Corrosion ResistanceSecond Edition; Corrected and Reprinted 08/01/1999 Cold-Reduced Carbon SteelSheet According to Hardness Requirements Second Edition; Corrected andReprinted 12-01-1999

Hot-Rolled Steel Strip ofStructural Quality Third Edition Hot-Rolled Carbon Steel Stripof Commercial and Drawing Qualities Second Edition Photography - PhotographicMaterials - Determination of ISO Resolving Power Second Edition; Correctedand Reprinted 09/01/2000 Cold-Reduced Carbon SteelStrip with a Maximum Carbon Content of 0,25% First Edition Sterile Hypodermic Syringesfor Single Use - Part 1: Syringes for Manual Use First Edition; Replaces ISO7886; Corrigendum 1-1995 Sterile Single-Use Syringes,with or without Needle, for Insulin First Edition; Amendment 1: 11/01/2000 Information Processing - Textand Office Systems - Standard Generalized Markup Language (SGML) FirstEdition; Amendment 1: 07-01-1988; Technical Corrigendum 1: 12-15Quality Management Systems -Fundamentals and Vocabulary Second Edition; Supersedes ISO 9000-1:1994 andISO 8402:1994 Quality Management and QualityAssurance Standards - Part 2: Generic Guidelines for the Application of ISO9001, ISO 9002 and ISO 9003 Second Edition Quality Management and QualityAssurance Standards - Part 3: Guidelines for the Application of ISO 9001:1994 to the Development, Supply, Installation and Maintenance Quality Management and QualityAssurance Standards - Part 4: Guide to Dependability Programme ManagementFirst Edition; IEC/CEI 300-1 Quality Management Systems -Requirements Third Edition; Also Supersedes ISO 9002:1994 and ISO 9003:1994 Quality Management Systems -Guidelines for Performance Improvements Second Edition; Supersedes ISO9004-1:1994 Quality Management and QualitySystem Elements - Part 2: Guidelines for Services First Edition; Correctedand Reprinted - 1993 Quality Management and QualitySystem Elements - Part 3: Guidelines for Processed Materials First Edition; (NZS 9004.3: 1994) (CAN/CSA-ISO 9004-3-94) Quality Management and QualitySystem Elements - Part 4: Guidelines for Quality Improvement First Edition; (Corrigendum 1-1994) (NZS 9004.4: 1994) (PNS 1004-4: 1993) Quality Management -Guidelines for Quality Plans First Edition Guidelines for AuditingQuality Systems - Part 1: Auditing First Edition; Corrected and Reprinted -1993 Guidelines for AuditingQuality Systems - Part 2: Qualification Criteria for Quality Systems AuditorsFirst Edition; Corrected and Reprinted - 1993 Guidelines for AuditingQuality Systems - Part 3: Management of Audit Programmes First Edition;Corrected and Reprinted - 1993 Quality Assurance Requirementsfor Measuring Equipment - Part 1: Metrological Confirmation System forMeasuring Equipment First Edition; Corrected and Reprinted - 199 Information Technology - 8 mmWide Magnetic Tape Cartridge for Information Interchange - Helical ScanRecording First Edition Standard Finishes for ContactFaces of Pipe Flanges and Connecting-End Flanges of Valves and Fittings (Withdrawn) Valves - SocketWelding and Threaded Ends Standard Marking System forValves, Fittings, Flanges and Unions Bypass and Drain Connections Quality Standard for SteelCastings for Valves, Flanges and Fittings and Other Piping Components VisualMethod for Evaluation of Surface Irregularities

Pipe Hangers and Supports -Materials, Design and Manufacture Pressure Testing of SteelValves Butterfly Valves Pipe Hangers and Supports -Selection and Application Cast Iron Gate Valves, Flangedand Threaded Ends Gray Iron Swing Check Valves,Flanged and Threaded Ends Ball Valves with Flanged orButt-Welding Ends for General Service Cast Iron Plug Valves, Flangedand Threaded Ends Bronze Gate, Globe, Angle andCheck Valves Stainless Steel, Bonnetless,Flanged Knife Gate Valves Class 3000 Steel Pipe UnionsSocket-Welding and Threaded Cast Iron Globe & AngleValves Flanged and Threaded Ends Diaphragm Type Valves Pipe Hangers and Supports -Fabrication and Installation Practices Wrought Copper Solder JointPressure Fittings Ball Valves Threaded,Socket-Welding, Solder Joint, Grooved and Flared Ends Calibration Laboratories andMeasuring and Test Equipment - General Requirements; (Replaces MIL-STD45662) Busways Electric Arc Welding PowerSources R(1999) Low Voltage Cartridge FusesR(1996) Enclosed and MiscellaneousDistribution Equipment Switches (600 Volts Maximum) Panelboards Residential Controls -Electrical Wall-Mounted Room Thermostats R(1996) Cross-Linked-Thermosetting-Polyethylene-InsulatedWire and Cable for the Transmission and Distribution of Electrical EnergyICEA NO. S-66-524; Revision No. 1 - Septem Energy Management Guide forSelection and Use of Single-Phase Motors R(1997) Fittings, Cast Metal Boxes,and Conduit Bodies for Conduit and Cable Assemblie Revision No. 1 - August1993 Industrial Control and SystemsGeneral Requirements Surge Arresters Industrial LaminatingThermosetting Products Motors and Generators Revision1:2000 Sheet-Steel Outlet Boxes,Device Boxes, Covers, and Box Supports Polyvinyl-Chloride (PVC)Externally Coated Galvanized Rigid Steel Conduit and Intermediate MetalConduit Specialty Transformers (ExceptGeneral-Purpose Type) R(1997) Transformers Regulators andReactors R(2000) Metal Cable Tray Systems ThirdEdition; CSA C22.2 No. 126.1-98 General Color Requirements forWiring Devices Industrial Control and SystemsControllers, Contactors, and Overload Relays Rated Not More Than 2000 VoltsAC or 750 Volts DC Deadfront DistributionSwitchboards General Instructions forProper Handling, Installation, Operation, and Maintenance of DeadfrontDistribution Switchboards Rated 600 Volts or Less

High Voltage Fuses Electrical Plastic Tubing(EPT) and Conduit (EPC-40 and EPC-80) Residential Controls -Electrical Wall- Mounted Room Thermostats Electrical and Electronic PTFE(Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire; Types ET(250 Volts), E (600 Volts), and EE (1000 Volts) R(1992) Industrial Control and SystemsFactory Built Assemblies R(2000) High-Pressure DecorativeLaminates Application, Fabrication, andInstallation of High- Pressure Decorative Laminates Power Switching Equipment PVC Fittings for Use withRigid PVC Conduit and Tubing Rubber-Insulated Wire andCable for the Transmission and Distribution of Electrical Energy ICEAS-19-81; Revision No. 1 - February 1994 Electrical and Electronic FEP(Fluorinated Ethylene Propylene) Insulated High Temperature Hook-Up Wire,Types KT (250 Volt), K (600 Volt), and KK (1000 Volt) Performance Standard forCategory 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables Thermoplastic-Insulated Wireand Cable for the Transmission and Distribution of Electrical Energy ICEAS-61402; Revision No. 1 - December 7, 1993; Revision No. 2 - D Guidelines for PrecautionaryLabeling for Arc-Welding and Cutting Products PVC Plastic Utilities Duct forUnderground Installations Supersedes TC 6-1990 and TC 8-1990 Wiring Devices - DimensionalSpecifications Method of Designation forElectric Lamps - Miniature and Sealed Beam Incandescent Lamps FirstEdition:April 1999; Revision of ANSI C78.390-1992 Motion/Position ControlMotors, Controls, and Feedback Devices Revision 1 - September 1996 Ethylene-Propylene-Rubber-InsulatedWire and Cable for the Transmission and Distribution of Electrical EnergyICEA S-68-516; Revision No. 1 - September 1991; Revision Fittings for PVC PlasticUtilities Duct for Underground Installation Energy Management Guide forSelection and Use of Polyphase Motors R(1999) Requirements for WatthourMeter Sockets R(1999) Electrical Nonmetallic Tubing(ENT) Filament-Wound ReinforcedThermosetting Resin Conduit and Fittings R(1997) (Withdrawn) Dry Cells andBatteries - Specifications Revision of ANSI C18.1-1986; Superseded by C18.1MPart 1 and Part 2 Dry-Type Transformers forGeneral Applications R(1997) Steam Turbines for MechanicalDrive Service R(1997) Binational Wire and CablePackaging Standard EEMAC 201- 2000; Errata 11/17/2000 Insulators - Wet-ProcessPorcelain and Toughened Glass - Suspension Type Supersedes ANSI C29.2:1992R(1999) High-Voltage Air DisconnectSwitches Interrupter Switches, Fault Initiating Switches, Grounding Switches,Bus Supports and Accessories Control Voltage Ranges - Schedu Switchgear - Unit Substations- Requirements Supersedes ANSI C37.121:1989 R(2000) High-Temperature andElectronic Insulated Wire - Impulse Dielectric Testing R(1991)

3.0 kHz Insulation ContinuityProof Testing of Wire and Cable R(2000) Performance Standard forTwisted Pair Premise Voice and Data Communications Cable Performance Standard forCoaxial Premise Data Communications Cables 9W and 13W Single Ended QuadTube Preheat -Start Fluorescent Lamps with Internal Means of Starting Specifications 9W and 13W Single Ended QuadTube Preheat -Start Fluorescent Lamps with Internal Means of Starting -Specifications Electric Lamps - Dimensionaland Electrical Characteristics 15W, 20W and 27W Single-Ended Quad TubeFluorescent Lamps with Internal Means of Starting with GX32d Bases Electric Lamps - Dimensionaland Electrical Characteristics 15W, 20W and 27W Single-Ended Quad TubeFluorescent Lamps with Internal Means of Starting with GX32d Bases Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics Fluorescent Lamps -Preheat-Start Types - Dimensional and Electrical Characteristics Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets Guidelines for theEstablishment of Wattage Ratings on Fluorescent Lamp Data Sheets Specifications for MercuryLamps Revision of ANSI C78.40-1985; Supplement C78.40a-1998 Electric Lamps: Guidelines forLow Pressure Sodium Lamps Revision of ANSI C78.41-1987 Rigid Steel Conduit - ZincCoated (GRC) Electrical Lamp Bases Electrical Lamp Bases American National Standard forBallasts - for High- Intensity-Discharge and Low-Pressure Sodium Lamps(Multiple-Supply Type) (Withdrawn) Zinc-Coated SpoolType Secondary Racks Enclosures for ElectricalEquipment (1000 Volts Maximum) Magnet Wire Revision 4 Standard for Aerospace andIndustrial Electrical Cable Standard for Portable FireExtinguishers (National Fire Codes, vol. 1) Standard for Low-ExpansionFoam (National Fire Codes, vol. 1) Standard on Carbon DioxideExtinguishing Systems (National Fire Codes, vol. 1) Installation of SprinklerSystems (National Fire Codes, vol. 1)

Standard for the Installationof Standpipe, Private Hydrant, and Hose Systems (National Fire Codes, vol. 1) Standard for Water Spray FixedSystems for Fire Protection (National Fire Codes, vol. 1) Standard for the Installationof Deluge Foam-Water Sprinkler and Foam-Water Spray Systems (National FireCodes, vol. 1) Standard for Dry ChemicalExtinguishing Systems (National Fire Codes, vol. 1) Standard for Wet ChemicalExtinguishing Systems (National Fire Codes, vol. 1) Standard for the Installationof Stationary Pumps for Fire Protection (National Fire Codes, vol. 1) Standard for the Installationof Private Fire Service Mains and Their Appurtenances (National Fire Codes,vol. 1) Flammable and CombustibleLiquids Code (National Fire Codes, vol. 1) Code for Motor Fuel DispensingFacilities and Repair Garages (National Fire Codes, vol. 1) Standard for the Installationof Oil-Burning Equipment (National Fire Codes, vol. 1) Standard for DrycleaningPlants (National Fire Codes, vol. 1) Standard for the Installationand Use of Stationary Combustion Engines and Gas Turbines (National FireCodes, vol. 2) Standard for Bulk OxygenSystems at Consumer Sites (National Fire Codes, vol. 2) National Fuel Gas Code AGAZ223.1-1999 Liquefied Petroleum Gas Code(National Fire Codes, vol. 2) National Electrical Code 1999Edition Recommended Practice forElectrical Equipment Maintenance (National Fire Codes, Vol. 9) Electrical Standard forIndustrial Machinery (National Fire Codes, vol. 3) Standard for Fire Doors andFire Windows (National Fire Codes, vol. 4) Standard on Incinerators andWaste and Linen Handling Systems and Equipment (National Fire Codes, vol. 4) Standard for Ovens andFurnaces (National Fire Codes, vol. 4) Standard for IndustrialFurnaces Using Vacuum as an Atmosphere (National Fire Codes, vol. 4) Standard for the Installationof Air Conditioning and Ventilating Systems (National Fire Codes, vol. 4) Standard for the Installationof Warm Air Heating and Air - Conditioning Systems (National Fire Codes, vol.4) Standard for Exhaust Systemsfor Air Conveying of Vapors, Gases, Mists, and Noncombustible ParticulateSolids (National Fire Codes, vol. 4) Ventilation Control and FireProtection of Commercial Cooking Operations (National Fire Codes, vol. 4) Standard for Health CareFacilities (National Fire Codes, vol. 5) Life Safety Code (NationalFire Codes, vol. 5) Standard for Grandstands,Folding and Telescopic Seating, Tents, and Membrane Structures (National FireCodes, vol. 5) Standard for Chimneys,Fireplaces, Vents, and Solid Fuel-Burning Appliances (National Fire Codes,vol. 6) Standard on Water-CoolingTowers (National Fire Codes, vol. 6) Standard Methods of Fire Testsof Door Assemblies (National Fire Codes, vol. 6) Standard Method of Test ofSurface Burning Characteristics of Building Materials (National Fire Codes,vol. 6) Standard Method of Test for DeterminingResistance of Mock-Up Upholstered Furniture Material Assemblies to Ignitionby Smoldering Cigarettes (National Fire Codes, vol

Guide to Fire HazardProperties of Flammable Liquids, Gases, and Volatile Solids (Formerly NFPA325M) (National Fire Codes, vol. 10) Standard for Tank Vehicles forFlammable and Combustible Liquids (National Fire Codes, vol. 6) Standard for Aircraft FuelServicing (National Fire Codes, vol. 7) Standard on Aircraft Hangars(National Fire Codes, vol. 7) Standard for EvaluatingAircraft Rescue and Fire- Fighting Foam Equipment (National Fire Codes, vol.7) Standard for Aircraft Rescueand Fire-Fighting Vehicles Errata 06/25/1996 (National Fire Codes, vol. 7) Standard Methods of Fire Testsfor Flame Propagation of Textiles and Films (National Fire Codes, vol. 7) Standard for the Installationof Lightning Protection Systems Standard for the Installation,Maintenance, and Use of Emergency Services Communications Systems (NationalFire Codes, vol. 8) Standard on Fire DepartmentOccupational Safety and Health Program (National Fire Codes, vol. 8) Standard for Automotive FireApparatus (National Fire Codes, vol. 8) Standard for Testing FireDepartment Aerial Devices (National Fire Codes, vol. 8) Standard on Design of andDesign Verification Tests for Fire Department Ground Ladders (National FireCodes, vol. 8) Standard on Fire Hose(National Fire Codes, vol. 8) Standard for Fire HoseConnections (National Fire Codes, vol. 8) Hydraulic Fluid Power - Pumps- Determination of Fluid Pressure Fluctuation Characteristics First Edition Information Report HydraulicFluid Power - Determination of Particulate Contaminant Level Using AutomaticOptical Particle Counters First Edition (Withdrawn) Method ofEstablishing the Flow Degradation of Fixed Displacement Hydraulic Fluid PowerPumps When Exposed to Particulate Contaminant; Appendix R(1994) Fluid Power Components -Method for Verifying the Fatigue and Establishing the Burst Pressure Ratingsof the Pressure Containing Envelope of a Metal Fluid Power Compo Hydraulic Fluid Power -Systems and Products - Method of Measuring Average Steady-State PressureFirst Edition Recommended Practice -Hydraulic Fluid Power - Systems and Products - Testing General Measurement,Principles and Tolerances First Edition Information Report -Recommendations for Conservation, Maintenance, and Disposal of HydraulicFluids First Edition Hydraulic Fluid Power -Systems Standard for Stationary Industrial Machinery Supplement to ISO 4413;1998 Hydraulic Fluid Power - General Rules Relating to Systems Hydraulic Fluid Power -Two-Port Slip-In Cartridge Valves - Cavities (Technically Equivalent to ISO7368:1989) First Edition Errata - June 1996 Hydraulic Fluid Power -Contamination Analysis Data - Reporting Method; Appendix (NFPA T2.9.3M R1)R(1993) Pneumatic Fluid Power -Systems Standard for Industrial Machinery NFPA/T2.25.1M-1986; First Edition Safety Requirements forPower-Actuated Fastening Systems Safety Requirements forDemolition Operations 19536- 0000 Personal Protection -Protective Footwear 19591-0000 (Withdrawn) Soda Fountain andLuncheonette Equipment Commercial Refrigerators andFreezers

Food Equipment Special Equipment and/orDevices Commercial Spray-TypeDishwashing and Glasswashing Machines Commercial Cooking,Rethermalization, and Powered Hot Food Holding and Transport Equipment Water Heaters, Hot WaterSupply Boilers, and Heat Recovery Equipment Dispensing Freezers Commercial Powered FoodPreparation Equipment Automatic Ice Making Equipment Plastics Piping SystemComponents and Related Materials Manual Food & BeverageDispensing Equipment Commercial Bulk MilkDispensing Equipment Pot, Pan, and Utensil Washers Detergent and Chemical Feedersfor Commercial Spray- Type Dishwashing Machines Cabinetry and Laboratory Furniturefor Hospitals High Pressure DecorativeLaminates for Surfacing Food Service Equipment Dinnerware Air Curtains for Entrancewaysin Food and Food Service Establishments Food Equipment Materials Drinking Water TreatmentChemicals - Health Effects Drinking Water SystemComponents - Health Effects Series for Wood Flush Doors Wood Window Units Water Repellent PreservativeNon-Pressure Treatment for Millwork Split Resistance Test Method Wood Stile and Rail Doors Adhesive Bond Test Method Cycle-Slam Test Method Hinge-Loading Test Method Door Finishes Test Method Screwholding Test Method Photography (Optics) -Photographic Lenses - Measurement Method for Distribution of IlluminancePIMA; Revision and Redesignation of ANSI PH3.22-1979 (R1992) Specifications for RubberWelding Hose Eigth Edition (#101 - Nondestructive Testing Handbook, vol. 2) Classical V-Belts and SheavesThird Edition; Joint RMA/MPTA/RAC (ANSI/IEEE)

Narrow V-Belts and SheavesThird Edition; Joint RMA/MPTA/RAC (ANSI/IEEE) Resistance Welding EquipmentStandards Compressive Properties ofOriented Fiber-Resin Composites Compression After ImpactProperties of Oriented Fiber- Resin Composites Open-Hole CompressionProperties of Oriented Fiber- Resin Composites Tensile Properties of OrientedFiber-Resin Composites Open-Hole Tensile Propertiesof Oriented Fiber-Resin Composites Determination of Twist inCarbon Fibers (Withdrawn) MinimumPerformance Criteria for Emergency Steering of Wheeled EarthmovingConstruction Machines October 1984; Cancelled July 1993, Superseded by J 1511 (R) Automotive and Off-HighwayAir Brake Reservoir Performance and Identification Requirements Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to Straight, Flareless, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 45 Degree Flareless, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 90 Degree, Flareless,Lightweight FSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 45 Degree, Flareless,Lightweight FSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 90 Degree, FlarelessLightweight FSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 90 Degree to 90 Degree, FlarelessLightweight FSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to Straight, Flared, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 45 Degree, Flared, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, Straight to 90 Degree, Flared, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 45 Degree, Flared, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 45 Degree to 90 Degree, Flared, LightweightFSC 4720 Hose Assembly, PTFE, CresBraid, 3000 psig, 400 Degrees F, 90 Degree to 90 Degree, Flared, LightweightFSC 4720 (Cancelled) (R) Excavator,Mini-Excavator, and Backhoe Hoe Bucket Volumetric Rating Exterior Sound Level for HeavyTrucks and Buses R(2001)

Hydraulic Hose FittingsJanuary 2001 Hydraulic Hose (Cancelled) Grounding ofStorage Batteries *NOT CURRENT DOCUMENT R(1989) (Cancelled) Sealed LightingUnits for Construction, Industrial, and Forest Machinery R(1994) Hose Assembly, 3000 psi, PTFE,Flareless, Straight to Straight, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flareless, Straight to 45 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flareless, Straight to 90 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flareless, 45 Degree to 45 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flareless, 45 Degree to 90 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flareless, 90 Degree to 90 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flared, Straight to Straight, Heavyweight FSC 4720 Hose Assembly, 3000 psi,PTFE,Flared, Straight to 45 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flared, Straight to 90 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flared, 45 Degree to 45 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flared, 45 Degree to 90 Degree, Heavyweight FSC 4720 Hose Assembly, 3000 psi, PTFE,Flared, 90 Degree to 90 Degree, Heavyweight FSC 4720 (Cancelled) Truck AbilityPrediction Procedure, Recommended Practice August 1987 (Cancelled) Certificates ofMaximum Net Horsepower for Motor Trucks and Truck Tractors R(1965) Upper Coupler Kingpin -Commercial Trailers and Semitrailers R(2001) Coolant System Hoses (Cancelled) Brake System RoadTest Code - Truck, Bus, and Combination of Vehicles Fifth Wheel Kingpin,Heavy-Duty - Commercial Trailers and Semitrailers R(2001) (Cancelled) Brake SystemPerformance Requirements - Truck, Bus, and Combination of Vehicles R(1985) Formed Tube Ends for HoseConnections and Hose Fittings January 2001 (Withdrawn) Gas Turbine EngineTransient Performance Presentation for Digital Computer Programs (Cancelled) Brake Performance- Rubber-Tired Earthmoving Machines, Standard Replaced by SAE J/ISO 3450 (Withdrawn) Corrosion ofAluminum Alloys by Aircraft Maintenance Chemicals Sandwich Test Determination of HydraulicPressure Drop (Withdrawn) Noise Control inFluid Power Systems of Marine Vehicles (See J 1782); *NOT CURRENT DOCUMENTR(1992) Safety Glazing Materials forGlazing Motor Vehicles and Motor Vehicle Equipment Operating on Land Highways- Safety Standard (Withdrawn) Specification forStraight Thread O-Ring Boss Port August 1988 Steel Cleanliness, PremiumAircraft-Quality Magnetic Particle Inspection Procedure Steel Cleanliness, PremiumAircraft-Quality Magnetic Particle Inspection Procedure Metric (SI)Measurement Phosphate TreatmentAntichafing Fuel and Oil Hoses FSC 4720

Electron-Beam Welding forFatigue Critical Applications Packaging and Marking ofPackages of Welding Wire Premium Quality Oil, Lubricating, LowTemperature for -55 Degrees C (- 67 Degrees F) Service Fluorocarbon (FKM) RubberHigh-Temperature - Fluid Resistant Low Compression Set 70 to 80 (Withdrawn) Plastic Sheet,Copper Faced, GTN Glass Fabric Reinforced Polytetrafluoroethylene CancelledOctober 1995 Powder, Fumed Silicon DioxideR(1997) Aluminum Alloy, Clad Two SidesSheet 1.25Mn - 0.12Cu (No. 12-0 Brazing Sheet) Annealed UNS A83003 Aluminum Alloy Die Forgings,and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution andPrecipitation Heat Treated UNS A 96151 Aluminum Alloy Die Forgings4.0Cu - 2.0Ni - 0.68Mg (2018-T61) Solution and Precipitation Heat Treated UNSA92018 Aluminum Alloy, Wire 5.0Mg -0.12Mn - 0.12Cr (5056-0) Annealed UNS A95056 (R) Aluminum Alloy, Castings5.0Si - 1.2Cu - 0.50Mg (C355.0-T6) Solution and Precipitation Heat TreatedUNS A33550 Aluminum Alloy Castings, HighStrength 4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (A201.0-T7) Solution HeatTreated and Overaged Aluminum Alloy, Rolled orForged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T351, 2219T352)Solution Heat Treated and Mechanically Stress Relieved UNS A922 Phosphor Bronze Bars, Rods,and Tubing 95Cu - 5Sn Hard Temper UNS C51000 Titanium Alloy Bars, Wire,Forgings, and Rings 6Al - 4V, Extra Low Interstitial Annealed UNS R56401 Titanium Alloy Tubing,Seamless, Hydraulic 3.0Al - 2.5V Cold Worked, Stress Relieved UNS R56320 Titanium Alloy, Bars, Wire,Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable UNS R56400 Carbon Steel, Sheet, Strip,and Plate (SAE 1020 and 1025) Annealed UNS G10200 and UNS G10250 Steel, Sheet and Strip 0.08 -0.13C, Aluminum Killed Deep Forming Grade UNS G10100 Steel Bars, Forgings, andTubing 0.15 - 0.20C (SAE 1018) UNS G10180 Iron-Nickel Alloy Strip 49Fe -5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated UNS N09902 Steel, Investment Castings0.95Cr - 0.20Mo (0.25 - 0.35C) (SAE 4130 Mod) Normalized or Normalized andTempered UNS J13046

Steel, Investment Castings0.95Cr - 0.20Mo (0.35 - 0.45C) (SAE 4140 Mod) Normalized or Normalized andTempered UNS J14046 Steel, Corrosion Resistant,Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization and SolutionHeat Treated or Homogenization, Solution, and Precipitation (R) Alloy, Corrosion and HeatResistant, Investment Castings 60Co - 29Cr - 4.5W as Cast UNS R30006 Steel, Corrosion and HeatResistant, Welded Tubing 17Cr - 7.1Ni - 1.1Al Solution Heat Treated,PrecipitationHardenable UNS S17700 Steel, Corrosion and HeatResistant, Seamless and Welded Hydraulic Tubing 19Cr - 9.5Ni - 0.03C Max ColdDrawn, 1/8 Hard Temper UNS S30403 Steel, Corrosion and HeatResistant, Welded Tubing 25Cr - 20Ni (SAE 30310) Solution Heat Treated UNSS31008 Nickel Alloy, Corrosion andHeat Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo 3.7CbAnnealed UNS N06625 Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W -18.5Fe Solution Heat Treated UNS N06002 Steel, Carburizing Grade,Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (SAE 9317)UNS K44414 Steel Sheet, Strip, and Plate0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) UNS K33517 Steel, Welding Wire 0.95Cr -0.20Mo (0.28 - 0.33C) Vacuum Melted, Environmental Controlled Packaging SAE4130 UNS K13147 Steel, Welding Wire 0.65Si -1.25Cr - 0.50Mo - 0.30V (0.28 - 0.33C) Vacuum Melted, Environment ControlledPackaging UNS K23015 Steel, Welding Wire 0.95Cr -0.20V (0.28 - 0.33C) (SAE 6130) Vacuum Melted, Environment ControlledPackaging UNS K13148 Rings, Sealing, Fluorocarbon(FKM) Rubber High- Temperature-Fluid Resistant Low Compression Set 85 to 95 Rings, Sealing, Fluorocarbon(FKM) Rubber High- Temperature-Fluid Resistant Low Compression Set 70 to 80 (Withdrawn) Bolts and Screws,Steel Low-Alloy, Heat Resistant 195,000 psi (1,345MPa) Tensile StrengthHardened and Tempered, Roll Threaded (AMS 6304) *NOT CURRENT DOC Bolts and Screws, Steel, UNSS66286 1650 Degrees F Solution Heat Treated Precipitation Heat Treated BeforeRoll Threaded FSC 5306; UNS S66286 (Noncurrent) Depleted UraniumCastings Aluminum-Beryllium Alloy,Sheet and Plate 38Al - 62Be (Noncurrent) Sealing Compound,Thread and Gasket, Fuel, Oil, and Water Resistant FSC 8030 (R) Bearings, Ball, Airframe,Antifriction, General Standard for Nut, Plain, Hexagon FSC 5310; UNSS66286

Nut-Hex, Check

Steel Self-Drilling TappingScrews Thread Rolling Screws (R) Sound Measurement -Off-Road Work Machines - Exterior April 1995 Dynamic Cushioning PerformanceCriteria for Snowmobile Seats January 1985 R(1995) Flashing Warning Lamp forIndustrial Equipment FSC 6240 R(1986) (R) Personnel Protection forGeneral Purpose Industrial Machines November 1992 Gasket, Metallic-Encased Seals - Testing of Radial Lip Decarburization in Hardenedand Tempered Unified Threaded Fasteners Decarburization in Hardenedand Tempered Metric Threaded Fasteners Surface Discontinuities onNuts R(1998) (R) Surface Discontinuities onBolts, Screws, and Studs in Fatigue Applications March 1994 (R) Operator Space EnvelopeDimensions for Off-Road Machines Load Moment System FSC 3810R(1994) Swell, Growth, and DimensionalStability of Brake Linings R(1980) Low Tension Wiring and CableTerminals and Splice Clips January 1974 Radiator Caps and Filler NecksR(1997) Electrical Charging Systemsfor Construction and Industrial Machinery May 1987 Continuous IdentificationMarking of Nickel and Nickel Base Alloys Continuous IdentificationMarking of Iron and Steel Products FSC 4710; Should Be Used Instead ofFED-STD183, Which Was Cancelled on February 15, 2000 Engine Oil Performance andEngine Service Classification (Other Than "Energy Conserving") Identification Marking ofAluminum, Magnesium, and Titanium (R) Qualifying a Sound DataAcquisition System Identification Marking ofCopper and Copper Base Alloy Mill Products Access Systems for Off-RoadMachines June 1988 (R) Windshield Wiper Systems -Trucks, Buses, and Multipurpose Vehicles Aluminum Alloy, Bar, Rod,Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specificationfor Aluminum Alloy 3003, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A93003 Aluminum Alloy 2014, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A92014 Aluminum Alloy 2024, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A92024 Aluminum Alloy 5083, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95083

Aluminum Alloy 5086, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95086 Aluminum Alloy 5454, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95454 Aluminum Alloy 5456, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A95456 Aluminum Alloy 6061, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96061 Aluminum Alloy 6063, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96063 Aluminum Alloy 6066, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96066 Aluminum Alloy 7075, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A97075 Aluminum Alloy 7178, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A97178 Aluminum Alloy, Bar, Rod,Shapes, and Wire, Extruded, 7178-T76 Improved Exfoliation Resistance UNSA97178 Aluminum Alloy Bar, Rod,Shapes, Extruded, 7075-T76 Improved Exfoliation Resistance UNS A97075 Aluminum Alloy, StructuralShapes, Extruded, 6061 UNS A96061 Aluminum Alloy 6162, Bar, Rod,Shapes, Tube, and Wire, Extruded UNS A96162 Instrument Face Design andLocation for Construction and Industrial Equipment April 1980 R(1987) (R) Instrumentation for ImpactTest - Part 1 - Electronic Instrumentation Supersedes J 211-1988 (R) Parking Lamps (FrontPosition Lamps) Aluminum and Aluminum Alloy,Bar, Rod, Wire, or Special Shapes; Rolled, Drawn, or Cold Finished; GeneralSpecification for Aluminum Alloy, Bar, Rod, andWire, Rolled, Drawn, or Cold Finished, 1100 UNS A91100 Aluminum Alloy, Bar, Rod, andWire, Rolled, Drawn, or Cold Finished, 3003 UNS A93003 Aluminum Alloy, Bar, Rod, andWire, Rolled, Drawn, or Cold Finished, 2011 UNS A92011 Aluminum Alloy, 2014, Bar,Rod, and Wire and Special Shapes, Rolled, Drawn, or Cold Finished UNS A92014 Aluminum Alloy, 2017, Bar,Rod, and Wire Rolled, Drawn, or Cold Finished UNS A92017 Aluminum Alloy, 2024, Bar,Rod, and Wire; Rolled, Drawn, or Cold Finished UNS A92024 Aluminum Alloy, 5052, Bar,Rod, and Wire; Rolled, Drawn, or Cold Finished UNS A95052

Aluminum Alloy 6061, Bar, Rod,and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished UNS A96061 Aluminum Alloy 7075, Bar, Rod,and Wire, and Special Shapes; Rolled, Drawn, or Cold Finished UNS A97075 Aluminum Alloy 6262, Bar, Rod,and Wire; Rolled, Drawn, or Cold Finished UNS A96262 Nut and Conical Spring WasherAssemblies R(1998) Spherical and Flanged Sleeve(Compression) Tube Fittings Aluminum and Aluminum Alloy,Plate and Sheet General Specification for Aluminum 1100, Plate and SheetUNS A91100 Aluminum Alloy 3003, Plate andSheet UNS A93003 Aluminum Alloy Alclad 2014,Plate and Sheet UNS A82014 Aluminum Alloy 2024, Plate andSheet UNS A92024 Aluminum Alloy Alclad 2024,Plate and Sheet UNS A82024 Aluminum Alloy 5083, Plate andSheet UNS A95083 Aluminum Alloy 5086, Plate andSheet UNS A95086 Aluminum Alloy 5052, Plate andSheet UNS A95052 Aluminum Alloy 5456, Plate andSheet UNS A95456 Aluminum Alloy 5454, Plate andSheet UNS A95454 Aluminum Alloy 6061, Plate andSheet UNS A96061 Aluminum Alloy 7075, Plate andSheet UNS A97075 Aluminum Alloy Alclad 7075,Plate and Sheet UNS A87075 Aluminum Alloy 7178, Plate andSheet UNS A97178 Aluminum Alloy Alclad 7178,Plate and Sheet UNS A87178 Aluminum Alloy, Alclad OneSide 7075, Plate and Sheet UNS A87075 Aluminum Alloy 5086, Plate andSheet for Sea Water Applications

Aluminum Alloy 5456, Plate andSheet, for Sea Water Applications Aluminum Alloy, 7178-T76,Plate and Sheet Improved Exfoliation Resistant UNS A97178 Aluminum Alloy, 7178-T76,Alclad Plate and Sheet, Improved Exfoliation Resistant UNS A87178 Aluminum Alloy, 7075, Plateand Sheet (Improved Exfoliation Resistant) Aluminum Alloy, Alclad 7075Plate and Sheet Improved Exfoliation Resistant UNS A87075 Aluminum Alloy, 7011 Alclad,7075 Plate and Sheet UNS A87075 Aluminum Alloy, 7011 Alclad,7178 Plate and Sheet UNS A87178 Aluminum Alloy 2124, Plate UNSA92124 Aluminum Alloy 2219, Plate andSheet UNS A92219 (R) Wheels/Rims - Trucks -Performance Requirements and Test Procedures Identification of Material forAN, MS, and AS Engine and Propeller Standard Utility Parts and Also forCompany Parts (R) Steering Frame Lock forArticulated Loaders and Tractors November 1992 Nickel Plating(Electrodeposited) FSC MFFP; Should be used instead of QQ-N-290, which wascancelled 3 May 2001 (R) Vehicle Grade ParkingPerformance Requirements September 1995 Operator Controls onIndustrial Equipment April 1980 R(1994) Engine Oil ViscosityClassification FSC 9150 (R) Automotive Air Brake LineCouplers (Gladhands) Chromium Plating(Electrodeposited) FSC MFFP; Should be used instead of QQ-C-320, which wascancelled on 3 May 2001 (R) Tire Guards for OperatorProtection - Earthmoving Haulage Machines (R) Multiposition Small EngineExhaust System Fire Ignition Suppression June 1995 Sound Level for Truck CabInterior October 1988 (R) Wheel Chocks June 1990 Spark Arrester Test Procedurefor Medium Size Engines January 1991 (R) Welded Flash-ControlledLow-Carbon Steel Tubing Normalized for Bending, Double Flaring, and Beading (R) Truck and Bus GradeParking Performance Test Procedure September 1995 Aluminum Alloy Forgings Flammability of PolymericInterior Materials - Horizontal Test Method June 1989 R(1994) Radius-Of-Load or Boom AngleIndicating Systems April 1985 R(1994) Load Indicating Devices inLifting Crane Service April 1985 Gogan Hardness of Brake LiningMay 1972 R(1996)

Specific Gravity of BrakeLining August 1971 R(1993) (R) Windshield DefrostingSystems Test Procedure and Performance Requirements - Trucks, Buses, andMultipurpose Vehicles (R) Windshield DefrostingSystems Performance Requirements - Trucks, Buses, and Multipurpose VehiclesJune 1994 (R) Operator Restraint Systemfor Off-Road Work Machines Sandwich Constructions andCore Materials; General Test Methods FSC 5680; Should Be Used Instead of MILSTD-401B, Which Was Cancelled on 24 September 1999 Chemical Compositions of SAECarbon Steels Chemical Compositions of SAEAlloy Steels Methods of Measuring CaseDepth R(1998) Wire, Steel, Carbon (HighCarbon, Round, for Mechanical Springs, General Purpose) FSC 9505 Mechanical and MaterialRequirements for Externally Threaded Fasteners Sintered Carbide ToolsFebruary 1977 (R) Cut Wire Shot June 1993 Identification Marking Methods Electrohydraulic Servovalves Aircraft Engine Fuel PumpCavitation Endurance Test Rivets and Riveting, StandardMay 1968 Sleeve Type Half BearingsNovember 1978 R(1995) Automotive Tube Fittings Refrigeration Tube Fittings -General Specifications Hydraulic Tube Fittings Hydraulic Flanged Tube, Pipe,and Hose Connections, Four-Bolt Split Flange Type June 1993 (R) Seamless Low-Carbon SteelTubing Annealed for Bending and Flaring February 1996 (R) Welded and Cold DrawnLow-Carbon Steel Tubing Annealed for Bending and Flaring Welded Low-Carbon Steel TubingFSC 4710 Automotive Pipe Fittings May1995 Automotive Pipe, Filler, andDrain Plugs May 1995 (R) Automotive Straight ThreadFiller and Drain Plugs June 1993 Lubrication Fittings (R) Storage Batteries (R) Voltage Drop for StartingMotor Circuits October 1996 Circuit Breakers April 1996 (R) Seven Conductor ElectricalConnector for Truck- Trailer Jumper Cable (R) Electrical Terminals -Eyelet and Spade Type June 1993 Headlamp Beam Switching March1990 Semiautomatic Headlamp BeamSwitching Devices June 1989 Aerospace Size Standard forO-Rings (R) Miniature Lamp Bulbs

(R) Test Methods and Equipmentfor Lighting Devices and Components for Use on Vehicles Less Than 2032 mm inOverall Width (R) Plastic Materials for Usein Optical Parts Such as Lenses and Reflex Reflectors of Motor VehicleLighting Devices (R) Color Specification June1995 (R) Front Fog Lamps June 1993 Coiled Tubing, CorrosionResistant Steel, Hydraulic Applications, Aerospace (R) Tail Lamps (Rear PositionLamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width Stop Lamps for Use on MotorVehicles Less Than 2032 mm in Overall Width Turn Signal Lamps for Use onMotor Vehicles Less Than 2032 mm in Overall Width Turn Signal Switch October1977 (R) Sidemarker Lamps for useon Road Vehicles Less than 2032 mm in Overall Width Backup Lamps (Reversing Lamps) Reflex Reflectors July 1995 Flashing Warning Lamps forAuthorized Emergency, Maintenance and Service Vehicles Determination of ParticulateContamination in Liquids by the Particle Count Method R(1991) Impulse Testing of HydraulicHose, Tubing, and Fitting Assemblies R(1991) Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees F,Heavyweight, Hydraulic (R) Hose Assembly and Tubing,Polytetrafluoroethylene, Cleaning Methods for Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 400 Degrees F, HeavyDuty, Hydraulic and Pneumatic Engine and TransmissionDipstick Marking August 1977 R(1995) V-Belts and Pulleys R(1997) Motor Vehicle Heater TestProcedure R(1998) Automotive TransmissionTerminology R(1997) (R) Brake Lining Quality TestProcedure (R) Rivets for Brake Liningsand Bolts for Brake Blocks July 1994 Speedometers and Tachometers -Automotive, Recommended Practice June 1984 R(1988) Location and Operation ofInstruments and Controls in Motor Truck Cabs, Recommended Practice June 1982R(1988) Gas Turbine Engine Steady-State and Transient Performance Presentation for Digital Computer Programs Rear Wheel Splash and StoneThrow Protection, Recommended Practice January 1956 R(1984) Installation Procedures andTorques for Fluid Connections R(1991) Tire Chain Clearance- Trucks,Buses (Except Suburban, Intercity, and Transit Buses), and Combinations ofVehicles, Information Report August 1985 Trailer Couplings, Hitches,and Safety Chains - Automotive Type Piloted Ring Seal Tube SwivelConnection Assembly R(1991) (R) Curbstone Clearance,Approach, Departure, and Ramp Breakover Angles - Passenger Car and LightTruck, Recommended Practice June 1996 Disc Wheel/Hub or DrumInterface Dimensions - Commercial Vehicles

Turning Ability and OffTracking - Motor Vehicles R(1998) Safety Chain of Full Trailersor Converter Dollies, Recommended Practice May 1988 Steel, Sheet and Strip, Mediumand High Carbon FSC 9515 Truck Tractor SemitrailerInterchange Coupling Dimensions, Information Report August 1984 Brake and ElectricalConnection Locations - Truck- Tractor and Truck-Trailer, Recommended PracticeMay 1985 Openings for Six- andEight-Bolt Truck Transmission Mounted Power Take-Offs R(2000) Rating of Winches Industrial and AgriculturalDisc Wheels R(1999) (R) Air Cleaner Test Code June1993 Nomenclature-Crawler Tractor,Standard; January 1954 R(1986) (R) Specification Definitions- Loaders Cutting Edge - Curved Grader,Standard June 1991 Countersunk Square Holes forCutting Edges and End Bits, Standard July 1986 (R) Capacity Rating-Scraper,Open Bowl Procedure for theDetermination of Particulate Contamination of Air in Dust Controlled Spacesby the Manual Particle Count Method Hydraulic Pump and MotorMounting and Drive Dimensions, Standard June 1996 Maintenance Interval Chart,Recommended Practice May 1991 Lubricant Types - Constructionand Industrial Machinery, Information Report January 1972 Aircraft Propulsion SystemPerformance Station Designation and Nomenclature Lighting Identification Code,Recommended Practice January 1995 Corrosion-Resistant SteelParts: Sampling, Inspection and Testing for Surface Passivation Should BeUsed Instead of MIL-STD-753, Which Was Cancelled on December 18, 1 (R) Dimensional Specificationsfor General Service Sealed Lighting Units Steel Bars, Wire, Shapes, andForgings; Corrosion Resistant Should Be Used Instead of QQ-S-763F, Which WasCancelled on October 5, 1998 Accumulators, Ground,Hydropneumatic Pressure Crane Load Stability Test CodeOctober 1990 Clamp, Half Tube SupportR(1991) (R) Aerospace - Procedure forthe Determination of Particulate Contamination in Hydraulic Fluids by theControl Filter Gravimetric Procedure (R) Hose Characteristics andSelection Chart Should Be Used Instead of MS33620 Which Was Cancelled on 7July 1999 Rated Operating Load for Loaders,Standard May 1987 Crane Hoist Line Speed andPower Test Code R(1998) Electrical Wiring Systems forConstruction, Agricultural, and Off-Road Machines May 1985 R(1994) Human Physical Dimensions,Recommended Practice May 1989 Test Procedures for Brake Shoeand Lining Bonds Brake System Road Test Code -Passenger Car and Light- Duty Truck R(1997) Nonmetallic Air Brake SystemTubing (R) Optical Warning Devicesfor Authorized Emergency, Maintenance, and Service Vehicles

Coding Systems forIdentification of Fluid Conductors and Connectors, Recommended PracticeDecember 1993 Trailer Tow Bar Eye and PintleHook/ Coupler Performance, Recommended Practice November 1987 Connection and AccessoryLocations for Towing Multiple Trailers, Recommended Practice November 1985 Electrical Terminals BladeType, Recommended Practice August 1969 Method - Pressure Drop Testsfor Fuel System Components Wrenching Configuration,Bi-Hexagonal (12 Point) Drive, Design Standard for Manufacturing and InspectionStandards for Preformed Packings (O-Rings) R(1991) Drawbar Test Procedure forConstruction, Forestry, and Industrial Machines, Standard May 1986 (R) Trailer Axle Alignment Determination of AluminumAlloy Tempers Through Electrical Conductivity Measurement (Eddy Current)R(1988) Fitting, Nipple, Reducer,Flareless Tube to Pipe, External Thread Fitting, Elbow, 90 Degree,Standard and Reducer, Flareless Tube to Pipe, External Thread Control Locations for Off-RoadWork Machines R(1994) Operator's Seat Dimensions forOff-Road Self-Propelled Work Machines, Standard December 1988 (R) Passenger Car WindshieldWiper Systems Torque Requirements,Installation and Qualification Test, Hose and Tube Fitting R(1993) Hazard Warning Signal Switch,Standard October 1988 Marine Push-Pull ControlCables August 1965 R(1980) (R) Sound Measurement -Off-Road Work Machines - Operator - Singular Type, Standard April 1995 Minimum Service AccessDimensions for Off-Road Machines December 1987 R(1993) Electrical Terminals - Pin andReceptacle Type, Standard July 1989 Hydraulic Power CircuitFiltration July 1965 R(1986) (R) Fitting, Adapter, Union,Flared to Boss Should be Used Instead of MS24487C, Which was Cancelled on 1March 2000 (R) Passenger Car WindshieldWasher Systems Guns, Spray, Oil and Solvent Wrenches, Hand Twelve PointHigh Strength, Thin Wall R(1999) Drive - Studded, Accessory,2.653 B.C. Square, Design Standard for Lifting Crane, Wire-RopeStrength Factors May 1991 (R) Recommended Practice forMeasuring Haze and Reflectance of Mirrors Drive-Accessory, (203.2) 8.000BC Round, QAD, Design Standard for Drive-Accessory, (254) 10.000BC Round, QAD, Design Standard for Spline Details, AccessoryDrives and Flanges Coupling-Clamp, Groove V-Band,6.400, 9.400, 11.400 Flange OD R(1991) Coupling-Clamp, Groove V-Band, Forged 6.400, 9.400, 11.400 Flange OD R(1991) Minimizing Stress- CorrosionCracking in Wrought Titanium Alloy Products (R) Vision FactorsConsiderations in Rearview Mirror Design, Information Report June 1995

Sound Level for Passenger Carsand Light Trucks Rope Supported Lattice-TypeBoom Crane Structures - Method of Test April 1985 R(1994) Recommended Practice for theDesign of Tubing Installations for Aerospace Fluid Power Systems R(1991) (R) Alarm - Backup - ElectricLaboratory Performance Testing, Standard August 1993 (R) Mechanical and MaterialRequirements for Steel Nuts Tee, Standard and Reducer,Bulkhead on Run, Internal Port on Side, Flareless Tube FSC 4730 R(2000) Tee, Standard and Reducer,Bulkhead and Internal Port on Run, Flareless Tube FSC 4730 R(2000) Tee, Standard and Reducer,Bulkhead on Run, Flareless Tube FSC 4730 R(2000) Elbow, 90 Degree, Standard andReducer, Flareless Tube FSC 4730 R(2000) Tee, Standard and Reducer,Flareless Tube FSC 4730 R(2000) Cross, Standard and Reducer,Flareless Tube FSC 4730 R(2000) Union, Standard and Reducer,Bulkhead, Flareless Tube FSC 4730 R(2000) Elbow, 90 Degree, Standard andReducer, Bulkhead, Flareless Tube FSC 4730 R(2000) Tee, Standard and Reducer,Bulkhead on Side, Flareless Tube FSC 4730 R(2000) Elbow, 45 Degree, Standard andReducer, Flareless Tube R(2000) Fuel-Fired Heaters - AirHeating - for Construction and Industrial Machinery, Standard December 1989 (R) Lighting and Marking ofConstruction, Earthmoving Machinery (R) Fitting, Tee, Standard andReducer , Bulkhead on Run, Internal Port on Side, Flared FSC 4730 (R) Fitting, Tee, Standard andReducer, Bulkhead on Run, Internal Port on Run, Flared FSC 4730 (R) Fitting, Tee, Standard andReducer, Bulkhead on Run, Flared FSC 4730 (R) Fitting, Elbow, 90 Degree,Standard and Reducer, Flared FSC 4730 Tee, Standard and Reducer,Flared Tube (R) Fitting, Cross, Standardand Reducer, Flared FSC 4730 (R) Fitting, Union, Standardand Reducer, Bulkhead, Flared FSC 4730 (R) Fitting, Elbow, 90 Degree,Standard and Reducer, Bulkhead, Flared FSC 4730

(R) Fitting, Tee, Standard andReducer, Bulkhead on Side, Flared FSC 4730 (R) Fitting, Elbow, 45 Degree,Standard and Reducer, Bulkhead, Flared FSC 4730 Performance Criteria forRollover Protective Structures (ROPS) for Construction, Earthmoving, Forestryand Mining Machines April 1988 R(1994) Safety Wire Holes, Hex,Fitting, Location of, Design Standard FSC 4720 R(2000) (R) Describing and Measuringthe Driver's Field of View, Recommended Practice August 1994 (R) Steel Stamped Nuts of OnePitch Thread Design - Inch Series, Standard August 1996 Fire Testing of Flexible Hose,Tube Assemblies, Coils, Fittings, and Similar System Components (R) Cantilevered Boom CraneStructures - Method of Test, Standard November 1993 Pressure Ratings for HydraulicTubing and Fittings, Information Report July 1995 (R) Seven-Conductor Cable Sleeve, Hose Assembly, FireProtection Sintered Tool Materials,Recommended Practice February 1977 Sleeve Hose Assembly, HeatShrinkable R(2000) Engine Sound Level MeasurementProcedure R(2000) Fuel Economy Measurement RoadTest Procedure, Standard June 1995 Numbering Metals and Alloys,Recommended Practice July 1995 (ASTM E 527) Hydraulic Excavator LiftCapacity Calculation and Test Procedure, Standard November 1988 Low Tension Primary Cable Bolts, Screws and Nuts -External Wrenching UNJ Thread, Inch Series - Design Standard FSC 53GP Determining Seat Index PointR(1997) Reporting Cleanliness Levelsof Hydraulic Fluids, Recommended Practice July 1979 R(1986) Sound Measurement - Off-RoadSelf-Propelled Work Machines Operator-Work Cycle Test Procedure to Measure theR.F. Shielding Characteristics of E.M.I. Gaskets R(1991) Operator Ear Sound LevelMeasurement Procedure for Small Engine Powered Equipment, RecommendedPractice October 1977 R(1985) Nondestructive InspectionStandards for Bolts and Screws Hydraulic Excavator OperatorControls, Recommended Practice April 1978 R(1988) Aircraft Gas Turbine EngineExhaust Smoke Measurement Telescopic Boom Length IndicatingSystem R(1980) Standard Machining AllowanceAircraft-Quality and Premium Aircraft-Quality Steel Bars and MechanicalTubing Flexure Testing of HydraulicTubing Joints and Fittings

Nomenclature and Dimensionsfor Hydraulic Excavators, Recommended Practice March 1981 R(1984) (R) Selection, Application,and Inspection of Electric Overcurrent Protective Devices High-Temperature Low PressureHose Assembly, Convoluted-, Tetrafluoroethylene-, for Aerospace R(1992) Standard Impulse MachineEquipment and Operation R(1991) Specification Definitions -Off-Road Work Machines, Standard January 1985 (R) Metric Thread RollingScrews (R) Fire Resistant PhosphateEster Hydraulic Fluid for Aircraft General Requirements forAerospace Ground Support Equipment Motorized and Nonmotorized Procedure for the ContinuousSampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines Graphic Symbols for AircraftHydraulic and Pneumatic Systems R(1991) Sleeve, Hose Assembly, ChafeGuard, TFE or FEP R(1991) Sleeve, Hose Assembly, ChafeGuard, Butyrate Coil R(1993) Automobile, Truck,Truck-Tractor, Trailer, and Motor Coach Wiring, Recommended Practice October1981 Sleeve, Hose Assembly, ChafeGuard, TFE Coil R(1993) Sleeve, Hose Assembly, ChafeGuard, Nylon Coil R(1993) Sleeve, Hose Assembly, ChafeGuard, Neoprene Rubber R(2000) Sleeve, Heavy Wall, HoseAssembly, Chafe Guard, TFE R(2000) Adapter - Port Connection RingLocked to Flareless Tube End R(1993) Port - Ring Locked FluidConnection Type Standard Dimensions for FSC 4730 R(2000) Adapters - Port Connection,Ring Locked Design, Installation and Removal of Fastener Torque for ThreadedApplications, Definitions of Chemical Milling Process Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 Degrees F,Lightweight, Hydraulic and Pneumatic Engine Power Test Code - SparkIgnition and Compression Ignition - Net Power Rating June 1990 R(1995) (R) Manufacturers'Identification of Aerospace Electrical and Electronic Wiring Devices andAccessories Aerospace Hydraulic FluidsPhysical Properties (R) Graphical Symbols forOperator Controls and Displays on Off-Road Self-Propelled Work Machines Alternate Dimensions, CenterBody Section, Shape Fluid Fitting, Design Standard FSC 4730 R(2000)

Fire Test Equipment forFlexible Hose and Tube Assemblies R(2000) Compound, Alkaline RustRemover Aircraft Turbine Engine Components R(1996) Scale Conditioner, AlkalineAircraft Turbine Engine Components Oxide Remover Compound, AcidicAircraft Turbine Engine Components R(1995) Oxide Conditioner, AlkalinePermanganate Aircraft Turbine Engine Components R(1999) Impulse Testing of AerospaceHydraulic Actuators, Valves, Pressure Containers, and Similar Fluid SystemComponents (R) Performance Requirementsfor Motor Vehicle Headlamps Acid, Inhibited PhosphoricAircraft Turbine Engine Components Room Temperature Application R(1996) Compound, Hot Carbon and PaintRemover Aircraft Turbine Engine Components Compound, Silicone RubberRemover Aircraft Turbine Engine Components Room Temperature ApplicationR(1996) Remover, Anti-Galling CompoundAircraft Turbine Engine Components Room Temperature Application R(1996) (R) Road Vehicle- HydraulicBrake Hose Assemblies for Use with Nonpetroleum-Base Hydraulic Fluids Automotive Air Brake Hose andHose Assemblies, Recommended Practice June 1985 (NZS/SAE J1402: 1985) InletTotal-Pressure-Distortion Considerations for Gas- Turbine Engines Gas Turbine Engine Inlet FlowDistortion Guidelines (R) Deicing/Anti-Icing Fluid,Aircraft, SAE Type I Fluid, Deicing/Anti-Icing,Runways and Taxiways Glycol Base (R) Fluid, AircraftDeicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV (R) Compound, Solid Runway andTaxiway Deicing/Anti- Icing Fluid, Generic,Deicing/Anti-Icing Runways and Taxiways Disinfectant Cleaner forAircraft Interior General Purpose Liquid Fitting - O-Ring Face Seal FSC4730; This Document is Technically Equivalent to ISO/DIS 8434 Part 3 (R) Braking Performance -Roller Compactors Deodorant, Aircraft Toilet

Test Procedure for BatteryFlame Retardant Venting Systems R(1998) (R) Performance Test forAir-Conditioned, Heated, and Ventilated Off-Road, Self-Propelled WorkMachines Hose Clamp Specifications Areas for Calculating Stressor Load Values for Metric MJ Externally Threaded Fasteners R(1991) Surface Preparation andPriming of Aluminum Alloy Parts for High Durability Structural AdhesiveBonding R(1995) Cleaner for Aircraft ExteriorSurfaces, Water- Miscible, Pressure-Spraying Type R(1994) Cleaner, Aircraft Glass Window Cleaner, Transparent PlasticR(1996) Cleaner, Alkaline Hot-TankType Deoxidizer, Acidic, forMagnesium Alloys R(1996) Instrumental Color DifferenceMeasurement for Exterior Finishes, Textiles and Colored Trim, RecommendedPractice June 1986 Cleaner, Anodic, Electrolytic,Alkaline for Steel, Tank Type R(1992) Wrenches, Twelve Spline,Metric R(1991) Measurement of Solar HeatingEffect July 1995 Inserts, Screw Thread, HelicalCoil Metric Series Procurement Specification for FSC5340 Gaging Practice and GageRequirements for MJ Metric Screw Threads Insert, Screw Thread, HelicalCoil Metric Series, Standard Assembly Dimensions for Nut, Self Locking - UNSS66286, 425 Degrees C &650 Degrees C, 1100 MPa, MJ Thread, ProcurementSpecification for, Metric R(1991) Nut, Self-Locking - Steel,Class 1100 MPa/235 Degrees C, MJ Thread Procurement Specification for, MetricFSC 5310 R(2000) Surface Preparation andPriming of Aluminum Alloy Parts for High Durability Structural Adhesive BondingHand Applied Phosphoric Acid Anodizing Desmutter, Aluminum, PowderedR(1994) Desmutter, Aluminum, LiquidR(1994) Cleaner, Carpet WaterExtraction Type Hose Assemblies, Installed,Visual Inspection Guide for

Structural Weldbonding ofAluminum Structures R(1995) Motor Vehicle Brake Fluid Fitting End, Internal FlareDesign Standard FSC 4730 R(2000) Coupling, Flexible, VariableCavity, Threaded Ferrule Type Tube Ends, Envelope Dimensions Design Standard Coupling Subassembly,Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends Half Coupling Subassembly,Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends Nut Assembly, Coupling,Flexible, Variable Cavity, Threaded, Ferrule Type Tube Ends Washer, Coupling, Flexible,Variable Cavity, Threaded, Ferrule Type Tube Ends Ferrule, Coupling, Flexible,Variable Cavity, Threaded, Ferrule Tube End Retainer, Coupling, Flexible,Variable Cavity, Threaded Ferrule Type Tube Ends Coupling Body, Flexible,Variable Cavity, Threaded Ferrule Type Tube Ends Fitting End, Half- Coupling,Flexible Variable Cavity Threaded, Ferrule Type Design Standard Ferrule End, Coupling,Flexible Variable Cavity, Threaded, Ferrule Type, Design Standard Hole Sizes, Recommended forMetric Fasteners on Propulsion Equipment R(1991) Bleed-Air Pneumatic Systemsfor Gas Turbine Equipped Marine and Amphibious Craft, Information Report;November 1984 R(1991) (R) Design and SpecificationGuide for Hydraulic Pumps Used on Advanced Surface Craft and SubmersibleVehicles, Information Report August 1989 (R) General EnvironmentalConsiderations for Marine Vehicles, Information Report December 1990 Hydraulic System Diagrams andAssociated Tables for Marine Vehicles April 1991 Materials for Fluid Systems ofMarine Vehicles December 1982 R(1987) (R) Ship Systems and Equipment- Hydraulic Systems - Noise Control Supersedes J 1782/HIR 1622A-1986 (R1992) Selection of HydraulicDirectional Control Valves for Marine Vehicle Applications Specifications and Standardsfor Marine Hydraulic Systems and Components May 1992 Spacers and Washers,Procurement Specification for, Metric R(1991)

Nut, Fitting, Retained,Lightweight Wire, Retainer Tube CouplingNut Nut, Fitting, Lightweight,Flareless FSC 4730 Exterior Sound Level ofSpecialized Aircraft Ground Support Equipment, Measurement of R(1991) Spring Clips and CushionSelection for Metal Tube Support, Metric Terminology for TitaniumMicrostructures R(1994) Chord Method of EvaluatingSurface Microstructural Characteristics (R) Coupling Assembly,V-Retainer, High Pressure High Temperature, Pneumatic Tube Coupling, V-Retainer, SingleLatch, Type I Standard Profile Flange, Male, Seam Weld Type IStandard Profile Flange, Female, Seam Weld,Type I Standard Profile Coupling, V-Retainer, SingleLatch, Type II Low Profile Flange, Male, Seam Weld, TypeII Low Profile Flange, Female, Seam Weld,Type II Low Profile Seal, Type I & II Standardand Low Profile Flange, Male, Butt Weld, TypeII Low Profile Flange, Female, Butt Weld,Type II Low Profile Flange, Male, Butt Weld, TypeI Standard Profile Flange, Female, Butt Weld,Type I Standard Profile Flange End, Male, Type IStandard Profile Design Standard Flange End, Female, Type IStandard Profile Design Standard Flange End, Male, Type II LowProfile Design Standard

Flange End, Female, Type IILow Profile Design Standard Flange, Male, Integral, WeldRing, Type II Low Profile Flange, Female, Integral, WeldRing, Type II Low Profile Flange, Male, Integral, WeldRing, Type I Standard Profile Flange, Female, Integral, WeldRing, Type I Standard Profile Coupling, V-Retainer, DoubleLatch, Type II Low Profile Installation, Joint,V-Retainer Coupling Assembly Coupling, V-Retainer, DoubleLatch, Type I Standard Profile Lubricating Oil, AircraftPiston Engine (Ashless Dispersant) Bolt, Tee Head, InterfaceSurface, Dimensions for R(1991) Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal, Straight to Straight Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal, Straight to 45 Degree Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal, Straight to 90 Degree Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi, Lightweight,Beam Seal, 45 Degree to 45 Degree Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal, 45 Degree to 90 Degree Hose Assembly,Polytetrafluoroethylene, CRES Reinforced, 400 Degrees F, 3000 psi,Lightweight, Beam Seal, 90 Degree to 90 Degree Qualification andCertification of Etch Inspectors R(1991) (R) Connections for GeneralUse and Fluid Power - Ports and Stud Ends with ISO 725 Threads and ORingSealing - Part 1: Threaded Port with O-Ring Seal in Truncated Ho Connections for General Useand Fluid Power - Ports and Stud Ends with ISO 725 Threads and O-Ring Sealing- Part 2: Heavy-Duty (S Series) Stud Ends ISO 11926-3 (R) Connections for GeneralUse and Fluid Power - Ports and Stud Ends with ISO 725 Threads and ORingSealing - Part 3: Light-Duty (L Series) Stud Ends, Standard; Mar Application of Direct Pressureto Resin in Curing of Epoxy and Addition Type Polyimides R(1995) (R) Age Controls for HoseContaining Age-Sensitive Elastomeric Material Nut, Hex, Free Running,Procurement Specification for, Metric R(1991)

Nuts, Self-Locking, UNS N07001730 Degrees C, 1100 MPa, and 1210 MPa Procurement Specification for, Metric (R) Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, up to 1500 psi and 450 DegreesF, Hydraulic and Pneumatic Hose Assembly, Polytetrafluoroethylene,Metallic Reinforced, up to 1500 psi and 450 Degrees F, Hydraulic andPneumatic (Supplement 1) Supplement 1 to AS 1946A-2000 Dendrite Arm Spacing ofStructural Aircraft Quality D357 Aluminum Alloy Castings, Determination andAcceptance of R(1996) Coupling Assembly, V-Band,Sheet Metal Flange, Pneumatic Tube R(1991) Coupling, Sheet Metal, 40Degree V-Band, Standard Latch FSC 5340 Coupling, Sheet Metal, 40Degree V-Band, Quick Release (Optional Safety) Latch R(1991) Flange, Sheet Metal R(1991) Flange End, Design StandardR(1991) Installation, Joint, 40 DegreeV-Band Coupling and Narrow Sheet Metal Flanges Lubricating Oil, AircraftPiston Engine (Non- dispersant Mineral Oil) Containers, Shipping andStorage, Reusable Recommended MeasurementPractices and Procedures for EMC Testing Fitting Assembly, Adapter RingLocked Port Connection to Beam Seal 4000 psi and 5000 psi /9/ FSC 4730R(2000) Aluminum Alloy Tempers Hose Assembly,Tetrafluoroethylene, Lightweight, 204 Degrees C, 21 000 kPa Hydraulic, MetricR(1991) Packing, Preformed - O-RingSeal Standard Sizes &Size Codes, Metric R(1991) (R) Port, Internal, StraightThread, Fitting Connection, Design Standard, Metric FSC 4730 (R) Pneumatic Tires forMilitary Tactical Wheeled Vehicles, Union, Flareless Tube, MetricFSC 4730 R(2000) Plug, Flareless Tube, MetricFSC 4730 R(2000) Cap Assembly, Pressure Seal,Flareless Tube, Metric FSC 4730 R(2000) Bushing, Screw ThreadExpander, Flareless Tube, Metric FSC 4730 R(2000) Union, Reducer, FlarelessTube, Metric FSC 4730 R(2000)

Plug, Port - MJ Thread, O-RingSeal, AMS-5640, Metric Nut, Flareless, Metric Union, Bulkhead, FlarelessTube, Metric FSC 4730 R(2000) Adapter Flareless Metric toInch FSC 4730 R(2000) Nut, Retained, Flareless,Metric FSC 4730 Union, Reducer/ExpanderBulkhead, Flareless Tube, Metric FSC 4730 R(2000) Test Methods, Hose Assemblies,Polytetrafluoroethylene (PTFE) FSC 4720 Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DEGCone, Straight to Straight, Lightweight, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, Straight to 45-Deg, Lightweight, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, Straight to 90-Deg, Lightweight, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, 45- Deg to 45-Deg, Lightweight, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, 45- Deg to 90-Deg, Lightweight, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, Cres Reinforced, 204 Degrees C, 21,000 kPa, 60-DegCone, to 90-Deg to 90-Deg, Lightweight, Metric R(1994) Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, Straight to Straight, MetricR(1991) Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, Straight to 45 Deg, Metric R(1991) Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, Straight to 90 Deg, Metric R(1991) Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, 45 Deg to 45 Deg, Metric R(1991) Hose Assembly,Tetrafluoroethylene, 21000 kPa, Flareless, 45 Deg to 90 Deg, Metric R(1991) Hose Assembly, Tetrafluoroethylene,21000 kPa, Flareless, 90 Deg to 90 Deg, Metric R(1991) Fitting End, Dimensions, FluidSystems Port Connection, Metric R(1993) Hose Assemblies, Metal MediumPressure, High Temperature, Metric R(1994) Hose Assembly, Metal, MediumPressure Flareless, Welded, Straight to Straight Fitting Ends, Metric R(1994) Hose Assembly, Metal, MediumPressure Flareless, Welded, Straight to 45 Degree Fitting Ends, MetricR(1994) Hose Assembly, Metal, MediumPressure Flareless, Welded, Straight to 90 Degree Fitting Ends, MetricR(1994) Hose Assembly, Metal, MediumPressure Flareless, Welded, 45 Degree to 45 Degree Fitting Ends, MetricR(1994) Hose Assembly, Metal, MediumPressure Flareless, Welded, 45 Degree to 90 Degree Fitting Ends, MetricR(1994)

Hose Assembly, Metal, MediumPressure Flareless, Welded, 90 Degree to 90 Degree Fitting Ends, MetricR(1996) Clamps, Loop or P Style,Single Point Mount, Multiple Shapes, Metric Clamp, Loop Style, Cushioned,with Wedge, Hydrocarbon Fluid Resistant, Metric Clamp, Loop Style, Cushioned,with Wedge, Phosphate Ester Fluid Resistant, Metric Clamp Support, Loop Clamp,Metric Clamp, Loop Style, withInsert, Hydrocarbon Fluid Resistant, Metric Clamp, Loop Style, withInsert, Phosphate Ester Fluid Resistant, Metric Clamp, Loop Style, withInsert, High Temperature, Metric Clamp Assemblies, Saddle orOmega Style, Two Point Mount, Multiple Shapes, Metric R(2000) Clamp, Saddle Type, Cushioned,Hydrocarbon Fluid Resistant, Metric Clamp, Saddle Type, Cushioned,Phosphate Ester Fluid Resistant, Metric Clamp, Saddle Type, Cushioned,High Temperature, Metric Clamp, Center Mount, BareMetal, Aluminum, Metric Clamp, Center Mount, BareMetal, Stainless Steel, Metric Clamp, Loop Type, Bare Metal,Aluminum, Metric Clamp, Loop Type, Bare Metal,Stainless Steel, Metric Clamp, Rectangular, 2 Piece,Cushioned, with Wedges, Hydrocarbon Fluid Resistant, Metric Clamp, Rectangular, 2 Piece,Cushioned, with Wedges, Phosphate Ester Fluid Resistant, Metric Clamp, Rectangular, 2 Piece,Cushioned, with Wedges, High Temperature, Metric Clamp, Rectangular Loop,Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Aluminum, Metric Clamp, Rectangular Loop,Cushioned, with Wedge, Hydrocarbon Fluid Resistant, Stainless Steel, Metric Clamp, Rectangular Loop,Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Aluminum, Metric Clamp, Rectangular Loop,Cushioned, with Wedge, Phosphate Ester Fluid Resistant, Stainless Steel,Metric

Clamp, Rectangular Loop,Cushioned, with Wedge, High Temperature, Stainless Steel, Metric Clamp, Center Mount, Cushioned,Hydrocarbon Fluid Resistant, Metric Clamp, Center Mount,Cushioned, Phosphate Ester Fluid Resistant, Metric Clamp, Center Mount,Cushioned, High Temperature, Metric Spark Plug Heat RatingClassifications FSC 5330 Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa,Lightweight Beam Seal, Straight to Straight, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa,Lightweight Beam Seal, Straight to 45 Degrees, Metric R(1994) Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 204 Degrees C, 21,000 kPa,Lightweight Beam Seal, Straight to 90 Degree, Metric R(2000) Castings, Classification andInspection of AREA NDTI; Should Be Used Instead of MIL-STD-2175A, Which WasCancelled on 10 November 1999 Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa,Beam Seal, Straight to Straight, Metric Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa,Beam Seal, Straight to 45 Degree, Metric Hose Assembly,Polytetrafluoroethylene, PTFE Cres Reinforced, 232 Degrees C, 10 500 kPa,Beam Seal, Straight to 90 Degree, Metric Fusion Welding for AerospaceApplications AREA THJM; Should Be Used Instead of MIL-STD-2219, Which WasCancelled on 10 September 1999 Tolerances Corrosion and HeatResistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire Tolerances, Metric Corrosionand Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars andWire Tolerances Corrosion and HeatResistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet, Strip, andPlate Tolerances, Metric Corrosionand Heat Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Sheet,Strip, and Plate Tolerances Corrosion and HeatResistant Steel Tubing R(2000) Tolerances, Metric Corrosionand Heat Resistant Steel Tubing R(2000) Connections for Fluid Powerand General Use - Ports and Stud Ends with ISO 261 Threads and O-Ring SealingPart 1: Port with O-Ring Seal in Truncated Housing ISO 6149Chemical Check Analysis LimitsCorrosion and Heat Resistant Steels and Alloys, Maraging and Other HighlyAlloyed Steels, and Iron Alloys R(2000) (R) Chemical Check Analysis LimitsTitanium and Titanium Alloys

Tolerances Low-Alloy SteelBars Tolerances, Metric Low-AlloySteel Bars (R) Tolerances Low-Alloy SteelSheet, Strip, and Plate (R) Tolerances, MetricLow-Alloy Steel Sheet, Strip, and Plate Tolerances Carbon and AlloySteel Tubing Tolerances, Metric Carbon andAlloy Steel Tubing R(1994) (R) Chemical Check AnalysisLimits Wrought Low-Alloy and Carbon Steels Tolerances Nickel, NickelAlloy, and Cobalt Alloy Sheet, Strip, and Plate R(1994) Chemical Check Analysis LimitsNickel, Nickel Alloys, and Cobalt Alloys R(2000) Ship Systems and Equipment -Threaded Fasteners - Inspection, Test, and Installation Requirements (R) Fasteners - Part Standard- Cap Screws, Hex Bolts, and Hex Nuts Cleanliness, Aircraft QualitySteel Magnetic Particle Inspection Procedure Cleanliness, Aircraft QualitySteel Martensitic Corrosion-Resistant Steels Magnetic Particle InspectionProcedure Cleanliness, Aircraft QualitySteel Martensitic Corrosion-Resistant Steels Magnetic Particle InspectionProcedure Metric (SI) Measurement Qualification Sampling and Testingof Steels Transverse Tensile Properties Determination of Delta FerriteContent Ship Systems and Equipment -Hydraulic Systems - Filter Selection Parameters Room Temperature TensileProperties of Castings Elevated Temperature TensileProperties of Castings Stress-Rupture Properties ofCastings R(1994) Lubricating Oil, AutomotiveEngine, API Service SJ for Military Administrative Service Lubricating Oil for WheeledMilitary Vehicles with Heavy-Duty Diesel Engines Sampling and Testing ofWrought Titanium Raw Material Except Forgings and Forging Stock Quality Assurance Sampling andTesting Carbon and Low- Alloy Steel Wrought Products and Forging Stock

Quality Assurance Sampling andTesting Corrosion and Heat Resistant Steels and Alloys Wrought Products andForging Stock Control of Forgings RequiringFirst Article Approval Plating, Cadmium (R) Plating, Cadmium LowHydrogen Content Deposit (R) Plating, ElectrolessNickel Plating, Chromium Hard Deposit Plating, Immersion Tin forAluminum Alloys Plating, Silver Nickel Strike,High Bake (R) Plating, Silver for HighTemperature Applications (R) Plating, Silver CopperStrike, Low Bake Plating, Silver-Rhodium Plating, Lead and Indium Plating, Nickel-CadmiumDiffused (R) Plating, Zinc-Nickel Alloy Plating, Copper (R) Plating of Aluminum forSolderability Zinc Immersion Pre-Treatment Process Plating, Nickel Low-StressedDeposit Plating, Gold for ThermalControl Shot Peening (R) Plating,Nickel-Thallium-Boron or Nickel-Boron Electroless Deposition Plating, Tin-Zinc Alloy Coating, Tungsten Carbide-CobaltDetonation Process

Coating, Aluminum OxideDetonation Deposition Disilicide Diffusion Coatingof Molybdenum and Molybdenum Alloys Pack Cementation Method R(1995) (R) Hard Anodic CoatingTreatment of Aluminum and Aluminum Alloys Processing and PerformanceRequirements Anodic Treatment of AluminumAlloys Chrome Acid Process (R) Anodic Treatment ofAluminum Alloys Sulfuric Acid Process, Undyed Coating Anodic Treatment of AluminumAlloys Sulfuric Acid Process, Dyed Coating Protective TreatmentsMagnesium Alloys Black Oxide Coating Conversion Coating of TitaniumAlloys Fluoride- Phosphate Type R(1994) Surface Treatment ofPolytetrafluoroethylene Preparation for Bonding R(1994) Polytetrafluoroethylene (PTFE)Resin Coating Low Build, 370 - 400 Degrees C (698 - 752 Degrees F) FusionR(1994) Ring - Back-Up, PortConnection, AMS 3660, Metric R(1991) Polytetrafluoroethylene (PTFE)Resin Coating High Build, 370 Degrees - 400 Degrees C (698 Degrees 752Degrees F) Fusion R(1994) Thread Compound, Anti-Seize,Graphite-Petrolatum R(1994) Nut - Hex, Back-Up Ring PortFitting Connector, AMS 5639, MJ Thread, Metric R(1991) Nut, Plain, Hexagon, PortFitting Connector, AMS 5639, MJ Thread, Metric R(1991) Coating, Vapor DepositedPoly-Monochloro-Para-Xylylene for Microcircuits R(1994) Gasket, Metal C-Ring, FaceSeal, Internal Pressure, UNS N07750 Silver Plated, Metric Groove Design, Metal C-RingGasket, Face Type Internal Pressure, Metric Pressure Testing, GaseousMedia 10 psi Pressure Testing 25 psiR(1995) Pressure Testing, GaseousMedia 40 psi Pressure Testing 55 psiR(1995) Pressure Testing 70 psiR(1995)

Pressure Testing 100 psiR(1995) Pressure Testing, Hydraulic200 psi R(1995) Pressure Testing, Hydraulic1000 psi Pressure Testing, Hydraulic2500 psi Fluid, Jet Reference FSC 9130R(2001) Inspection, Ultrasonic Productover 0.5 Inch (12.7 mm) Thick Ultrasonic Inspection Titaniumand Titanium Alloy Bar and Billet Inspection, Ultrasonic, ofThin Materials 0.50 Inch (12.7mm) and under in Cross-Sectional Thickness Ultrasonic InspectionCentrifugally-Cast, Corrosion- Resistant Steel Tubular Cylinders Ultrasonic Inspection ThinWall Metal Tubing Structural Examination ofTitanium Alloys Chemical Etch Inspection Procedure Inspection Material, Penetrant Hardness and ConductivityInspection of Wrought Aluminum Alloy Parts Brazing, Aluminum Torch orFurnace Welding, Electron-Beam Pyrometry R(1994) Nitriding, Molten Salt Bath Heat Treatment of Steel PartsGeneral Requirements Gas Nitriding and HeatTreatment of Low-Alloy Steel Parts R(1992) Gas and Vacuum Carburizing andHeat Treatment of Carburizing Grade Steel Parts Carburizing Carbon andLow-Alloy Steel Parts Heat Treatment of WroughtAluminum Alloy Parts (SUPERSEDING: SAE AMS-H-6088) R(1994)

Identification Finished PartsR(1994) Heat Treatment of TitaniumAlloy Parts Identification Castings Identification Forgings Identification and PackagingElastomeric Products R(1993) Packaging and Marking ofPackages of Welding Wire Standard Method Identification Welding Wire,Tab Marking Method Packaging and IdentificationPreformed Packings Material Safety Data SheetsR(1992) Fluid, Reference for TestingDi-Ester (Polyol) Resistant Material Polyalkylene Glycol Heat TreatQuenchant Magnetic Particles,Nonfluorescent Dry Method Magnetic Particles,Nonfluorescent Wet Method, Oil Vehicle, Ready-to-Use Magnetic Particles,Nonfluorescent Wet Method, Dry Powder Magnetic Particles,Nonfluorescent Wet Method, Oil Vehicle, Aerosol Packaged Magnetic Particles,Fluorescent Wet Method, Dry Powder Magnetic Particles,Fluorescent Wet Method, Oil Vehicle, Ready-to-Use Magnetic Particles,Fluorescent Wet Method, Oil Vehicle, Aerosol Packaged Lubricant, Instrument Bearing,Petroleum Base Viscosity 15 R(1994) Lubricant, Instrument Bearing,Petroleum Base Viscosity 35 Bolts, Screws and Studs, ScrewThread Requirements R(1991) Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991)

(R) Nut, Self-Locking, DoubleHexagon, Reduced Envelope AS 7251; FSC 5310 Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991) Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991) Nut, Self-Locking, DoubleHexagon, Reduced Envelope, AMS 7251 R(1991) (R) Acceptance Criteria -Magnetic Particle, Fluorescent Penetrant, and Contrast Dye PenetrantInspection Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 1.5 Dia Nom Length R(1991) Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 2 Dia Nom Length R(1991) Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 2.5 Dia Nom Length R(1991) Insert - CRES Helical CoilFine Thread, Straight Stud Locking, 3 Dia Nom Length R(1991) Stud-Straight, Key Locked,Steel .190-32 UNJF X .190- 32 UNJF R(1991) Stud - Straight, Key Locked,Steel .250-28 UNJF X .250- 28 UNJF R(1991) Stud - Straight, Key Locked,Steel .3125-24 UNJF X .3125-24 UNJF R(1991) Stud - Straight, Key Locked,Steel .325-24 UNJF X .375- 24 UNJF R(1991) Stud - Straight, Key Locked,CRES AMS 5731 .190-32 UNJF X .190-32 UNJF R(1991) Stud - Straight, Key Locked,CRES AMS 5731 .250-28 UNJF X .250-28 UNJF R(1991) Stud - Straight, Key Locked,CRES AMS 5731 .3125-24 UNJF X .3125-24 UNJF R(1991) Stud - Straight, Key Locked,CRES AMS 5731 .375-24 UNJF X .375-24 UNJF R(1991) Insert - CRES Helical Coil FineThread, Locking (Low Friction Systems) 1.5 Dia Nom Length R(1991) Insert - CRES Helical CoilFine Thread, Locking (Low Friction Systems) 2 Dia Nom Length R(1991) Insert - CRES Helical CoilFine Thread, Locking (Low Friction Systems) 2.5 Dia Nom Length R(1991) Insert - CRES Helical CoilFine Thread, Locking (Low Friction Systems) 3 Dia Nom Length R(1991) Screw, Machine - Hexagon Head,PD Shank, CRES AMS 5731, .164-36 UNJF-3A R(1991) Adhesion Promoter forPolysulfide Sealing Compounds R(2000) Screw, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, CRES AMS 5731, .164-36 UNJF-3A R(1991) Primer, Adhesive,Corrosion-Inhibiting for High Durability Structural Adhesive Bonding FSC 8040R(2001) Primer, Adhesive,Corrosion-Inhibiting High Durability Epoxy, -55 Degrees to +95 Degrees C (-67Degrees to +203 Degrees F) R(2001) Primer, Adhesive,Corrosion-Inhibiting High Durability Epoxy, -55 Degrees to +120 Degrees C(-67 Degrees to +248 Degrees F) R(2001) Primer, Adhesive,Corrosion-Inhibiting High Durability Epoxy, -55 to +175 Degrees C (-67 to+347 Degrees F) R(1997) Primer, Adhesive, Corrosion-InhibitingHigh Durability Epoxy, -55 to +215 Degrees C (-67 to +419 Degrees F) R(1997) Plug, Expansion - Aluminum,2024-T4, Long; Std and .010 Oversize Diameters R(1991) Pin, Expansion - Aluminum,(2024-T4), Long R(1991) Plug, Expansion - Aluminum,2024-T4, Short; Std and .010 Oversize Diameters R(1991) Pin, Expansion - Aluminum,(2024-T4), Short R(1991) Plug, Expansion - CRES, 416,Long; Std and .010 Oversize Diameters R(1991)

Pin, Expansion - CRES, 416,Long R(1991) Plug, Expansion - CRES, 416,Short; Std and .010 Oversize Diameters R(1991) Pin, Expansion - CRES, 416,Short R(1991) Plug, Expansion - CRES, 303,Long; Std and .010 Oversize Diameters R(1991) Pin, Expansion - CRES, 303,Long R(1991) Plug, Expansion - CRES, 303,Short; Std and .010 Oversize Diameters R(1991) Pin, Expansion - CRES, 303,Short R(1991) Coating Material, SiliconeResin 205 Degrees C (400 Degrees F) Cure R(1994) Coating Material, PhenolicResin PTFE Pigmented, 150 Degrees C (302 Degrees F) Cure (R) Coating Materials,Fluorocarbon (FKM) Elastomeric (R) Coating Material,Fluorocarbon (FKM), Elastomeric Rain-Erosion Resistant, Black (R) Coating Material,Fluorocarbon (FKM) Elastomeric Rain-Erosion and Thermal-Flash Resistant,White (R) Coating Material,Fluorocarbon (FKM) Elastomeric Anti-Static Topcoating, Black Stud, Stepped - 2.5 DiaEngagement, PD Shank, AMS 5731 .5625-18 UNJF-3A X .500-20 UNJF-3A R(1995) Fluid, Aircraft Compass Nut, Plain-O.D. Slots, KeyWasher Locked, AMS 6233, MIL-S-8879 R(1991) (R) Solvents, Cleaning,Cleaning Prior to Application of Sealing Compounds Magnesium Alloy, Processes forPretreatment and Prevention of Corrosion on Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .190-32 UNJF3AR(1991) Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .250-28 UNJF3AR(1991) Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .3125-24 UNJF3AR(1991) Bolt, Machine - Double HexExtended Washer Head, Drilled, Cl Tol Shank, AMS 5643, .375-24 UNJF3AR(1991) Silicone Rubber Sponge ClosedCell, Medium, Extreme Low Temperature R(2001) Silicone Rubber Sponge ClosedCell, Firm, Extreme Low Temperature R(2001) Silicone Rubber Sponge ClosedCell, Medium R(1996) Sponge, Silicone Rubber ClosedCell, Firm R(1996)

Sponge, Chloroprene (CR)Rubber Soft R(1998) Sponge, Chloroprene (CR)Rubber Medium Stiffness R(1998) Sponge, Chloroprene (CR)Rubber Firm R(1998) Butadiene Acrylonitrile (NBR)Rubber Petroleum-Base Hydraulic Fluid Resistant 55 - 65 Butadiene Acrylonitrile (NBR)Rubber Dry Heat Resistant 35 - 45 Butadiene Acrylonitrile (NBR)Rubber Dry Heat Resistant 55 - 65 Rubber, SyntheticLow-Temperature Resistant 25 - 35 Synthetic Rubber Low-TemperatureResistant 45 - 55 Chloroprene (CR) RubberWeather Resistant 25 - 35 Chloroprene (CR) RubberWeather Resistant 45 - 55 Packing, Preformed - AMS 7276- Seal R(1991) Chloroprene (CR) RubberWeather Resistant 65 - 75 Packing, Preformed - AMS 7276,'O' Ring R(1991) Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistant 55 - 65 R(1998) Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistant 75 - 85 R(1996) Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistance 35 - 45 R(1998) Acrylonitrile Butadiene (NBR)Rubber Aromatic Fuel Resistant 65 - 75 R(1995) Ring, Retaining-Spiral,Internal, Heavy Duty, CRES R(1991) Ring, Retaining-Spiral,External, Heavy Duty, CRES R(1991) Standard Elastomer Stocks TestSlabs R(1998) Test Slabs, AcrylonitrileButadiene (NBR-H) Medium- High Acrylonitrile, 65 - 75 Test Slabs, AcrylonitrileButadiene (NBR-L) Low Acrylonitrile, 65 - 75 Test Slabs, Chloroprene (CR)65 - 75

Test Slabs, Fluoroelastomer(FKM) 65 - 75 R(1998) Test Slabs, Fluorosilicone(FVMQ) 55 - 65 Test Slabs, PhosphonitrilicFluoroelastomer (FZ) 65 - 75 Ring, Retaining-Spiral,Internal, Light Duty, CRES R(1991) Ring, Retaining-Spiral,External, Light Duty, CRES R(1991) Ring, Retaining, Spiral,Minimum Distortion, Dimensional and Acceptance Standard for R(1991) Rubber, Synthetic GeneralPurpose, Fluid Resistant 55 - 65 R(1995) Sleeve, Flared, Tube Fitting -Aluminum FSC 4730 Synthetic Rubber Hot OilResistant, High Swell 45 - 55 R(1998) Acrylonitrile Butadiene (NBR)Rubber Hot Oil and Coolant Resistant, Low Swell 45 - 55 R(1995) Acrylonitrile Butadiene (NBR)Rubber Hot Oil and Coolant Resistant, Low Swell 55 - 65 R(1995) Rivet - Tubular, Countersunk,AS 7228 Rivet - Tubular, Universal, AS7228 Rivet - Tubular, Countersunk,AS 7232 Rivet - Tubular, Universal, AS7232 Bolt, Tee Head - AMS 5708,Chamfered, .1900-32 UNJF-3A R(1991) Bolt, Tee Head - AMS 5708,Chamfered, .2500-28 UNJF-3A R(1991) Bolt, Tee Head - AMS 5708,Chamfered, .3125-24 UNJF-3A R(1991) Bolt, Tee Head - AMS 5708,Chamfered, .3750-24 UNJF-3A Butyl (IIR) Rubber PhosphateEster Resistant 35 - 45 Butyl (IIR) Rubber PhosphateEster Resistant 65 - 75 R(1994) Butyl (IIR) Rubber PhosphateEster Resistant 85 - 95 R(1999) Chloroprene (CR) RubberWeather Resistant 35 - 45 R(1999) Chloroprene (CR) RubberWeather Resistant 55 - 65 R(1999)

Chloroprene (CR) Rubber FlameResistant 55 - 65 Chloroprene (CR) Rubber FlameResistant 65 - 75 Ethylene Propylene (EPM)Rubber Phosphate Ester Resistant 55 - 65 R(2001) Ethylene Propylene (EPDM)Rubber Hydrazine-Base-Fluid Resistant 75 - 85 R(1998) Synthetic Rubber and CorkComposition General Purpose Medium R(2001) Clamp, Loop-Cushioned, CRES,High Temperature, .204 Hole Inactive for New Design After April 1, 1987 Pin - Cotter, CRES AMS 7211,Metric Series R(1991) Identification of StandardUtility Parts - Bolts and Nuts R(1991) Ethylene-Propylene-Diene(EPDM) Rubber General Purpose 45 - 55 R(2001) Nut, Self-Locking, Clip,Floating, AMS 7251 R(1991) Nut, Self Locking - SplineDrive, Extended Washer UNS S66286, Silver Plate, MJ Thread, Metric R(1991) Sealing Compound, Polysulfide(T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities HighStrength, for Intermittent Use to 360 Degrees F (182 Degrees C) Chloroprene (CR) Rubber Sheet,Cotton Fabric Reinforced Weather Resistant R(1995) Cloth, Nylon, PolyurethaneCoated Thermally, Radio Frequency, or Ultrasonically Sealable R(1995) Nut - Self-Locking, Clinch,Serrated Shank, 700 Degrees F, Dry Film Coated, UNS S66286, UNJ Thread Chloroprene (CR) Rubber Sheet,Nylon Cloth Reinforced Weather Resistant R(1995) Nut - Self-Locking, Clinch,Serrated Shank, 1200 Degrees F, Silver Plated, UNS S66286, UNJ Thread Acrylonitrile Butadiene (NBR)Rubber Sheet and Molded Shapes Nylon Cloth Reinforced Fuel Resistant R(1995) Nut - Self-Locking, Clinch,Serrated Shank, 400 Degrees C, Dry Film Coated, UNS S66286, MJ Thread, Metric Sheet, Acrylonitrile Butadiene(NBR) Rubber and Non- Asbestos Fiber Fuel and Oil Resistant Nut - Self-Locking, Clinch,Serrated Shank, 650 Degrees C, Silver Plated, UNS S66286, MJ Thread, Metric Sealing Compound, IntegralFuel Tanks and General Purpose, Intermittent Use to 360 Degrees F (182Degrees C) Sealing Compound,Polythioether Integral Fuel Tanks and General Purpose, Fast CuringIntermittent Use to 360 Degrees F (182 Degrees C) Insert, Screw Thread, HelicalCoil, Metric Series, Free Running, CRES, Uncoated Insert, Screw Thread, HelicalCoil, Metric Series, Free Running, CRES, Dry Film Lubricated

Sealing Compound, Polysulfide(T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities LowDensity (1.20 to 1.35 sp gr), for Intermittent Use to 360 Degrees Insert, Screw Thread, HelicalCoil, Metric Series, Free Running, CRES, Cadmium Plated Bolt, Machine-Hex Head-PDShank-MJ Thread, AMS 5731, Metric Bolt, Machine-Spline ExtendedWasher, PD Shank Long Thread, AMS 5731, Metric R(1991) Nut, Plain Hex - UNS S66286,MJ Thread, Metric R(1991) Bolt, Machine-Hex Head- PDShank MJ Thread, AMS 6322, Cadmium Plate, Metric R(1991) Nut, Self-Locking, DoubleHexagon, AMS 5709 R(1993) Clip - Spring, Tension, Outer5.5 mm Bolt Hole, AMS 5525, Metric Clip - Spring, Tension, Inner5.5 mm Bolt Hole, AMS 5525, Metric Cushion - Tube Clamp Support,PTFE, Metric Silicone, Rubber GeneralPurpose 40 Durometer R(2001) Silicone Rubber GeneralPurpose 50 Durometer R(2001) Nut, Plain Hex - UNS G87400,Cadmium Plate, MJ Thread, Metric R(1991) Silicone, Rubber GeneralPurpose 60 Durometer R(2001) Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .190- 32 UNJF-3A R(1991) Silicone, Rubber GeneralPurpose 70 Durometer R(2001) Bolt-Machine, Hex Head,Drilled, PD Shank, MJ Thread, AMS 6322, Cadmium Plate, Metric R(1991) Silicone, Rubber GeneralPurpose 80 Durometer R(2001) Rubber, Silicone (VMQ) LowCompression Set, Non-Oil- Resistant 65 - 75 R(1995) Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .250- 28 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .3125-24 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,PD Shank, AMS 5708, .375- 24 UNJF-3A R(1991) Silicone (VMQ) Rubber Sheet,Glass Cloth Reinforced R(1995) Stud - Straight, Ring Locked,CRES AMS-5731 0.190- 24UNJC X 0.190- 32UNJF Silicone (VMQ) Rubber Sheet,Glass Cloth Reinforced Heat and Weather Resistant 60 - 80 R(2001) Stud - Straight, Ring Locked,CRES AMS-5731 0.250- 20UNJC X 0.250- 28UNJF Stud - Straight, Ring Locked,CRES AMS-5731 0.3125- 18UNJC X 0.3125- 24UNJF Stud - Straight, Ring Locked,CRES AMS-5731 0.375- 16UNJC X 0.375- 24UNJF

Sponge, Fluorosilicone (FVM)Rubber Closed Cell R(2001) Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 55 - 65 R(2001) Fluorosilicone (FVMQ) RubberHigh Temperature Fuel and Oil Resistant 70 - 80 R(2001) Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 35 - 45 R(2001) Fluorosilicone (FVMQ) RubberFuel and Oil Resistant, High Strength 45 - 55 R(2001) Insert, Screw Thread, HelicalCoil, Metric Series, Screw Locking, CRES, Uncoated Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 45 - 55 R(2001) Insert, Screw Thread, HelicalCoil, Metric Series, Screw Locking, CRES, Dry Film Lubricated Fluorosilicone (FVMQ) RubberFuel and Oil Resistant 65 - 75 R(2001) Insert, Screw Thread, HelicalCoil, Metric Series, Screw Locking, CRES, Cadmium Plated Silicone Rubber ExtremeLow-Temperature Resistant 15 - 30 R(2001) Silicone Rubber ExtremeLow-Temperature Resistant 35 - 45 R(2001) Silicone (PVMQ) RubberExtreme-Low-Temperature Resistant 55 - 65 R(2001) Silicone (PVMQ) RubberExtreme-Low-Temperature Resistant 65 - 75 R(1998) Silicone (PVMQ) RubberExtreme-Low-Temperature Resistant 75 - 85 R(1998) Bolt, Machine-Hex Head, PDShank, Long Thread, AMS 5662, Metric R(1991) Bolt, Machine-Spline ExtendedWasher, PD Shank, Long Thread, AMS6322, Cadmium Plated, Metric R(1991) Bolt, Machine-Spline ExtendedWasher, PD Shank, Long Thread, AMS 5662, Metric Bolt, Machine-Spline ExtendedWasher, Full Shank, Long Thread, AMS 5731 Metric R(1991) Bolt, Machine-Spline ExtendedWasher, Full Shank, Drilled, Long Thread, AMS 5731, Metric R(1991) Bolt, Machine-Spline DriveExtended Washer Head, Full Shank, Long Thread, AMS5662, Metric R(1991) Nut, Plain Hex - Thin, UNSS66286, MJ Thread, Metric R(1991) Silicone Rubber 1000 psi (6.90MPa) Tensile Strength 45 - 55 R(1996) Silicone Rubber 1000 psi (6.89MPa) Minimum Tensile Strength 55 - 65 Durometer

Rubber, Silicone 1200 psi(8.27 MPa), High Modulus 45 - 55 R(1995) Bolt, Machine-Hex Head- FullShank, Long Thread, AMS 5731 Metric R(1991) Silicone (VMQ) Rubber 1150 psi(7.93 MPa) Tensile Strength, High Resiliency 25 - 35 R(2000) Bolt, Spline Drive ExtendedWasher Head, PD Shank, Long Thread, AMS 5708, Metric Silicone (VMQ) Rubber 1100 psi(7.58 MPa) Tensile Strength, High Resiliency 65 - 75 R(1998) Nut, Self Locking - ReducedHex Drive, UNS S66286, Silver Plate, MJ Thread, Metric R(1991) Nut, Castellated, Hex - UNSS66286, MJ Thread, Metric R(1991) Nut, Spline Drive - ExtendedWasher, Cupwasher Lock, UNS S66286, Silver Plate, MJ Thread, Metric R(1991) Packing, Preformed - O-RingSeal, AMS 7276, Metric R(1991) Nut, Self Locking - SplineDrive, Extended Washer, UNS G87400, Cadmium Plate, MJ Thread, Metric R(1991) Nut, Plain Hex - Thin, UNSG87400, Cadmium Plate, MJ Thread, Metric R(1991) Silicone (VMQ) RubberLubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65R(1995) Rubber, Silicone (VMQ)Lubricating Oil and Compression Set Resistant 65 - 75 R(1995) Bolt, Machine - Hex Head,Drilled, Full Shank, Long Thread, AMS 5731, Metric R(1991) Bolt, Machine-Spline Drive,Extended Washer Head, Full Shank, LG Thread, AMS 5662, Metric R(1991) Bolt, Machine-Spline ExtendedWasher, PD Shank, Long Thread, Drilled, AMS5662 Metric R(1991) Bolt, Machine-Hex Head, Drilled,PD Shank, Long Thread, AMS 5662, Metric R(1991) Bolt, Spline Drive ExtendedWasher Head, Drilled, PD Shank, Long Thread, AMS 5708, Metric (R) Sealing Compound AircraftFirewall (R) Bolts and Screws, UNS S66286,Corrosion and Heat Resistant Steel, Procurement Specification, Metric (FSC5306) Adhesive/Sealant,Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing Bolts & Screws, UNS G87400Tensile Strength 860 MPa & 1000 MPa Procurement Specification, Metric FSC5306 (R) Bolts and Screws, NickelAlloy UNS N07718, Tensile Strength 1275 MPa Procurement Specification, Metric(FSC 5306) (R) Bolts and Screws, UNSN07001 Tensile Strength 1210 MPa, Thread and Fillet Radius Rolled BeforeAging, Procurement Specification, Metric FSC 5306 Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 6 x 1 - 6 x 1 R(1993) Hose, PolytetrafluoroethyleneTFE Fluorocarbon Resin Wire Braid Reinforced R(1995) Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 7 x 1 - 7 x 1 R(1993) Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 8 x 1 - 8 x 1 R(1993) Tetrafluoroethylene/PropyleneRubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80 and 85 to95

Stud, Straight - 2.5 DiaEngagement, A286, MJ Metric 10 x 1.25 - 10 x 1.25 R(1993) Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 6 x 1 - 5 x 0.8 R(1993) Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 7 x 1 - 6 x 1 R(1993) Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 8 x 1 - 7 x 1 R(1993) Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 10 x 1.25 - 8 x 1 R(1993) Stud, Stepped - 1.5 DiaEngagement, A286, MJ Metric 12 x 1.25 - 10 x 1.25 R(1993) Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 6 x 1 - 5 x 0.8 R(1993) Stud, Stepped - 2.0 Dia Engagement,A286, MJ Metric 7 x 1 - 6 x 1 R(1993) Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 8 x 1 - 7 x 1 R(1993) Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 10 x 1.25 - 8 x 1 R(1993) Stud, Stepped - 2.0 DiaEngagement, A286, MJ Metric 12 x 1.25 - 10 x 1.25 R(1993) Clip - Spring, Tension, Outer6.7 mm Bolt Hole, AMS 5525, Metric Clip - Spring, Tension, Inner6.7 mm Bolt Hole, AMS 5525, Metric Bolt, Machine-Hex Head-Drilled, PD Shank, Long Thread, AMS 5731, Metric R(1991) Clamp - Tube Support, SpringClips and PTFE Cushion Procurement Specification for Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .190-32 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .250-28 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .3125-24 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 1 Hole, PD Shank, AMS 5708, .375-24 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .190-32 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .250-28 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .3125-24 UNJF-3A R(1991) Bolt, Machine - Hexagon Head,Drilled 6 Holes, PD Shank, AMS 5708, .375-24 UNJF-3A R(1991) (R) Flux, Silver Brazing (R) Flux, Silver Brazing HighTemperature Flux, Aluminum Brazing forTorch or Furnace Brazing Flux, Aluminum Dip Brazing1030 Degrees F (554 Degrees C) or Lower Liquidus Nut, Plain Hex - Drld, UNSG87400, Cadmium Plate, MJ Thread, Metric R(1991) Nut, Plain Hex - UNS S66286,Silver Plate, MJ Thread, Metric R(1991) Nut, Plain Hex - Drld, UNSS66286, Silver Plate, MJ Thread, Metric R(1991) Nut, Plain Hex - Thin, UNSS66286, Silver Plate, MJ Thread, Metric R(1991) Nut, Castellated, Hex - UNSG87400, Cadmium Plate, MJ Thread, Metric R(1991) Nut, Castellated, Hex - UNSS66286, Silver Plate, MJ Thread, Metric R(1991) Nut, Castellated, Hex - Thin,UNS G87400, Cadmium Plate, MJ Thread, Metric R(1991) Nut, Castellated, Hex - Thin,UNS S66286, Silver Plate, MJ Thread, Metric R(1991) Nut, Self Locking, SplineDrive, Extended Washer, UNS N07001, Silver Plate, MJ Thread, Metric R(1991) Nut, Self Locking - Shank UNSN07001, Silver Plate, MJ Thread, Metric FSC 5310 Packing, Preformed - O-RingSeal, AMS 7273, Metric R(1991) Spacer, Sleeve - for .190 InchBolt, AMS4901 or AMS4921 R(1991) Spacer, Sleeve - for .250 InchBolt, AMS4901 or AMS4921 R(1991)

Spacer, Sleeve - for 5mm Bolt,AMS4901 or AMS4921, Metric R(1991) Spacer, Sleeve - for 6mm Bolt,AMS4901 or AMS4921, Metric R(1991) O-Ring Groove Design forPacking Preformed, Elastomeric O-Ring Seals, Static, Axial Compression,Metric FSC 5330 O-Ring Groove Design forPacking Preformed, Elastomeric O-Ring Seals, Static, Radial Squeeze, Metric Packing, Preformed - O-RingSeal, AMS 7267, Metric R(1991) Nut, Self Locking - SplineDrive, Captive Washer, UNS S66286, Silver Plate, MJ Thread, Metric Packing, Preformed O-RingSeal, Fluorocarbon (MIL-R- 83485, Type I), Metric R(1993) Bolt, Machine - Tee Head,Chamfered Classification: 1210 MPa /730 Degrees C Close Tol Shank, UNSN07001, Metric FSC 5306 Bolt, Machine - Spline DriveHD, Close Tol Full Shank, AMS-5662, Metric Bolt, Spline Drive SpecialExtended Washer Head, Reduced Head, PD Shank, AMS 5708, Metric Bolt, Spline Drive ExtendedWasher Head, Reduced Head, Retainer Locked, PD Shank, AMS 5708, Metric Retainer, Nut and Bolt, CupLock 5 mm and 6 mm, AMS 5510, Metric Washer, Flat, AMS-5525, Metric Bolt, Machine - SplineExtended Washer, Full Head, PD Shank, Long Thread, AMS 5662 - Metric Nut, Self Locking - DoubleHexagon, Extended Washer, UNS S66286, Silver Plated, UNJ Thread FSC 5310 (R) Nut, Self-Locking, Plate,One Lug, Floating, Low Height, UNS S66286, Class: 125 ksi/800 Degrees F (R) Nut, Self-Locking, Plate,One Lug, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125 ksi/800Degrees F Nut, Self-Locking, Plate, TwoLug, Floating, Reduced Rivet Spacing, Low Height, UNS S66286 Class: 125ksi/800 Degrees F fsc 5310 (R) Nut, Self-Locking, Plate,Side by Side, Reduced Rivet Spacing, Low Height, UNS S66286, Class: 125ksi/800 Degrees F (R) Nut, Self-Locking,Hexagon, Regular Height, UNS S66286, Class: 125 ksi/800 Degrees F Nut, Self-Locking, 12 Point,Reduced Height, Silver Plate, UNS S66286 (R) Nut, Self-Locking, ExtendedDouble Hexagon, Reduced Flange, Dry Film Lube, UNS S66286, Class: 160 KSI/800Degrees F Stud-Stepped, 1.5 DIAEngagement, .375-16 UNJC-3A Mod X .3125-24 UNJF-3A (UNS S66286) Gasket - Type X or XV EngineAccessory Drive Gasket - Type XI EngineAccessory Drive Gasket - Type XII, XIV A andXIV B Engine Accessory Drive Gasket - Type XIII EngineAccessory Drive Gasket - Type XIV-C EngineAccessory Drive Gasket - Type XVI EngineAccessory Drive Gasket - Type XIX EngineAccessory Drive Gasket - Engine AccessoryDrive Insert - Thin Wall, ShortSelf-Locking, 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread Insert - Thin Wall, LongSelf-Locking 1025 Degrees F, Silver Plated UNS N07718, UNJ Thread

Insert - Screw Thread, ThinWall, Self-Locking UNS NO7718, Silver Plated, Class: 185 ksi/1025 Degrees F,Procurement Specification (FSC5340) Cable, Safety, Kit - Corrosionand Heat Resistant Steel, UNS S32100 Cable, Safety, Kit - CorrosionResistant Steel, UNS S30400 Plastic Sheet and Film, VinylCopolymers Unplasticized R(1998) Assembly Nut and Clip,Removable Self-Locking Nut, UNS S66286 Basket, Removable Self-LockingNut, UNS S66286 Sleeve, Removable Self-LockingNut, UNS S30403 Assembly Nut, Plate, RemovableSelf-Locking Nut Packing, Preformed - O-RingSeal AMS 7272 Sheet, Polyether Urethane (EU)Elastomer Foam Shock Absorbing R(2001) Foam, Polyether Urethane (EU)Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density R(1993) Foam, Polyether Urethane (EU)Elastomer, Shock Absorbing 15 Pounds/ Cubic Foot (240 kg/m3) Density R(1998) Foam, Polyether Urethane (EU)Elastomer, Shock Absorbing 20 Pounds/ Cubic Foot (320 kg/m3) Density R(1998) Packing, Preformed - O-RingSeal AMS 7270 Foam, Flexible PolyurethaneOpen Cell, Medium Flexibility R(2001) Packing, Preformed - O-RingSeal AMS 7274 Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled FSC 9320 R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 45 Durometer "A" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 55 Durometer "A" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 65 Durometer "A" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 75 Durometer "A" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 85 Durometer "A" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 95 Durometer "A" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 55 Durometer "D" R(2001) Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 65 Durometer "D" R(2001)

Resin, Polyether Urethane (EU)Casting Flexible, Solid, Unfilled 75 Durometer "D" R(2001) Bolt, Shear - Double Hex Head,UNS N07718 - 185 ksi Rivet-Solid, Universal Head,AS7232 Corrosion and Heat Resistant Nickel Alloy, Metric Pin, Spring - Tubular, Coiled,Standard Duty, UNS N07718 Packing, Preformed - O-RingSeal AMS 7271 FSC 5330 Bolt, Machine - Double HexHead, PD Shank, UNS N07718 - 185 ksi Packing, Preformed - O-RingSeal AMS 7259 Packing, Preformed - O-RingSeal AMS 3304 Pin and Plug, Expansion, KitCres, 416, Long Pin and Plug, Expansion, KitCres, 416, Short Pin and Plug, Expansion, KitCres, 303, Long Pin and Plug, Expansion, KitCres, 303, Short Pin and Plug, Expansion, KitAl Alloy 2024, Short Pin and Plug, Expansion, KitAl Alloy 2024, Long Plastic Sheet Cotton FabricReinforced Phenol- Formaldehyde R(1998) Plastic Sheet, PolycarbonateGeneral Purpose Film, Copper Clad Polyester Plastic Tubing Cotton FabricReinforced Phenol- Formaldehyde Resin, Polyimide, LaminatingHigh Temperature Resistant, 315 Degrees C (599 Degrees F) Tubing, IrradiatedPolychloroprene Elastomer, Electrical Insulation Flexible, Heat-Shrinkable,1.750 to 1 Shrink Ratio Plastic Extrusions andMoldings, Polycarbonate General Purpose Tubing, Plastic, ElectricalInsulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2to 1 Shrink Ratio R(1995) Plastic Sheet and Strip,Modified Vinyl, Foamed Closed Cell Tubing, Plastic, ElectricalInsulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1Shrink Ratio R(1995) Tubing, Irradiated PolyolefinPlastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1Shrink Ratio Sheet,Polychlorotrifluoroethylene (PCTFE) Molded, Unplasticized R(1995) Polyfluoroethylene-PropyleneFilm and Sheet Tubing,Polychlorotrifluoroethylene (PCTFE) Unplasticized R(1998)

Film,Polychlorotrifluoroethylene (PCTFE) Unplasticized R(1995) Rods, Sheets, and MoldedShapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized R(1995) Polytetrafluoroethylene (PTFE)Film Non-Critical Grade R(1999) Tubing, Electrical InsulationStandard Wall, Extruded Polytetrafluoroethylene (PTFE) R(1999) Tubing, Electrical InsulationLight Wall, Extruded Polytetrafluoroethylene (PTFE) R(1999) Tubing, Electrical InsulationThin Wall, Extruded Polytetrafluoroethylene (PTFE) R(1999) PolytetrafluoroethyleneExtrusions Normal Strength, as Sintered Polytetrafluoroethylene Film,General Purpose Grade Polytetrafluoroethylene (PTFE)Sheet, Glass Cloth Reinforced R(1998) Polytetrafluoroethylene (PTFE)Moldings Premium Grade, as Sintered Insulation, Thermal CeramicFiber Insulation, Thermal SilicaFiber Adhesive, Polyimide Resin,Film and Paste High Temperature Resistant, 315 Degrees C (599 Degrees F)R(1995) Adhesive, Foaming, HoneycombCore Splice, Structural - 55 Degrees C to +82 Degrees C (-65 Degrees F to+180 Degrees F) R(1994) Adhesive, Foaming, Honeycomb,Core Splice, Structural - 54 Degrees to +177 Degrees C (-65 Degrees to +350Degrees F) R(1994) Sandwich Structures, GlassFabric-Resin Low Pressure Molded, Heat Resistant Paper Honeycomb 125 lb (55 kg)Paper R(1994) Shims, Filled Resin CompoundPrecatalyzed Sheet R(2001) Shims, Filled Resin CompoundLiquid Precatalyzed R(2001) Microspheres, Hollow GlassR(1994) Moldings, Glass Fiber FilledPolytetrafluoroethylene 75 PTFE Resin, 25 Glass, as Sintered R(1994) (R) Tape, Low Modulus Aramid300 (1334), 1000 (4448) and 8000 (13,345) Breaking Strength

Tape, Low Modulus Aramid 2(51), 300 (1334) Breaking Strength R(1994) Tape, Low Modulus Aramid 2(51), 1000 (4448) Breaking Strength R(1994) Tape, Low Modulus Aramid 2(51), 3000 (13,345) Breaking Strength R(1994) Webbing, Nylon, IntegralLocking Slots Webbing, Nylon, IntegralLocking Slots 5/8 (15.9) Wide, 1000 (4448) Breaking Strength Webbing, Nylon, IntegralLocking Slots 5/8 (15.9) Wide, 2000 (8896) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1 (25) Wide, 3000 (13,345) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1 (25) Wide, 4000 (17,793) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1 (25) Wide, 5000 (22,241) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/16 (27) Wide, 6000 (26,689) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/16 (27) Wide, 7000 (31,138) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/16 (27) Wide, 8000 (35,586) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 9000 (40,034) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 10,000 (44,482) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 11,000 (48,930) Breaking Strength Webbing, Nylon, IntegralLocking Slots 1-1/8 (29) Wide, 12,000 (53,379) Breaking Strength Webbing, Low Modulus AramidR(1998) Webbing, Low Modulus Aramid9/16 (14) Wide, 500 (2224) Breaking Strength Herringbone Twill, Resin TreatedR(1999) Webbing, Low Modulus Aramid 1(25) Wide, 600 (2669) Breaking Strength Herringbone Twill R(1999) Webbing, Low Modulus Aramid3/4 (19) Wide, 600 (2669) Breaking Strength Herringbone Twill R(1998) Webbing, Low Modulus Aramid1-23/32 (44) Wide, 5500 (24,465) Breaking Strength Double Plain Weave withBinder R(1998) Webbing, Low Modulus Aramid1-23/32 (44) Wide, 3600 (16,014) Breaking Strength Herringbone Twill, ResinTreated R(1999)

Webbing, Low Modulus Aramid3-1/32 (77) Wide, 9000 (40,034) Breaking Strength Double Plain Weave withBinder R(1998) Webbing, Low Modulus Aramid1-23/32 (44) Wide, 8700 (38,700) Breaking Strength Double Plain Weave withBinder R(1998) Webbing, Low Modulus Aramid1-23/32 (44) Wide, 1200 (5338) Breaking Strength Herringbone Twill R(1998) Webbing, Low Modulus Aramid1-23/32 (44) Wide, 6500 (28,913) Breaking Strength Herringbone Twill ResinTreated R(1999) Webbing, Low Modulus Aramid 1(25) Wide, 6000 (26,689) Breaking Strength Herringbone Twill R(1998) Webbing, Low Modulus Aramid1-3/4 (44) Wide, 10,000 (44,482) Breaking Strength Herringbone Twill R(1998) Webbing, Low Modulus Aramid 1(25) Wide, 9000 (40,034) Breaking Strength Special Weave R(1998) Webbing, Low Modulus Aramid1-23/32 (44) Wide, 7300 (32,472) Breaking Strength Twill, Resin TreatedR(1999) Webbing, Low Modulus Aramid1-1/4 (32) Wide, 800 (3,559) Breaking Strength Herringbone Twill R(1998) Webbing, Low Modulus Aramid 1(25) Wide, 2500 (11,121) Breaking Strength Herringbone Twill R(1998) Webbing, Low Modulus Aramid1-1/2 (38) Wide, 1700 (7562) Breaking Strength Special Weave R(1997) Webbing, Tubular, Low ModulusAramid-54 R(1998) Webbing, Tubular, Low ModulusAramid 9/16 (14) Wide, 1400 (6228) Breaking Strength R(1998) Webbing, Tubular, Low ModulusAramid 3/4 (19) Wide, 2300 (10,231) Breaking Strength R(1998) Webbing, Tubular, Low ModulusAramid 1 (25) Wide, 4000 (17,793) Breaking Strength R(1998) Webbing, Tubular, Low ModulusAramid 3-3/16 (81) Wide, 2250 (10,008 N) Breaking Strength R(1998) Cloth, Parachute, Meta-Aramid,Low Modulus R(1994) Cloth, Parachute, Meta-Aramid,Low Modulus 4.7(159) Weight, Twill R(2001) Cloth, Parachute, Meta-Aramid,Low Modulus 6.5(220) Weight, Special Weave R(2001) Cloth, Parachute, Meta-Aramid,Low Modulus 12.0(407) Weight, Special Weave R(2001) Cloth, Parachute, Meta-Aramid,Low Modulus 7.0(237) Weight, Plain Weave R(2001) Cloth, Parachute, Meta-Aramid,Low Modulus 18.0(610) Weight, Basket Weave, Resin Treated R(2001)

Tape, Adhesive, Pressure-Sensitive Masking Rope, Aramid Fiber, Jacketedfor Antenna- Support Systems R(1993) Rope, Aramid Fiber, JacketedCabled Strand, Extruded Jacket Rope, Aramid Fiber, JacketedParallel Strand, Extruded Jacket Rope, Aramid Fiber, JacketedParallel Yarn, Braided Jacket Nylon Braid, Flat ElectricalTying Resin Coated (R) Cloths, Cleaning forAircraft Primary and Secondary Structural Surfaces FSC 7920 Cloth, Glass Finished forResin Laminates Cloth, Type "E"Glass, "B" Stage Polyester- Resin- Impregnated, 7781 Style Fabric,Flame Resistant R(1995) Roving, Type "S-2"Glass Epoxy Resin Impregnated Cloth, Type "S"Glass 181 Style Fabric, Finish No. HTS- 904 (R) Cloth, Quartz Finished forResin Laminates Cloth, Quartz, "B"Stage Polyimide Resin Impregnated Style 581 Fabric, 315 Degrees C (599Degrees F) Filaments, Boron TungstenSubstrate, Continuous R(1995) Boron Filament Tape,Epoxy-Resin-Impregnated R(2001) Boron Filament Tape,Epoxy-Resin-Impregnated Type B4.0- E374 (Type B0.102-E191) R(2001) Boron Filament Tape,Epoxy-Resin-Impregnated Type B5.6- E374 (Type B0.142-E190) R(2001) Boron Filament Tape,Epoxy-Resin-Impregnated Type B8.0- E374 (Type B0.203-E190) R(2001) Boron Filament Tape,Epoxy-Resin-Impregnated Type B4.0- E180 (Type B0.102-E82) R(2001) Boron Filament Tape,Epoxy-Resin-Impregnated Type B5.6- E180 (Type B0.142-E82) R(2001) Boron Filament Tape,Epoxy-Resin-Impregnated Type B8.0- E180 (Type B0.203-E82) R(2001) Graphite Yarn, Non- Structural5 Ply Yarn, 720 Filaments

Fibers, Carbon, Tow and Yarnfor Structural Composites R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF 400 (2758) Tensile Strength, 33 (228) TensileModulus R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF 300 (2068) Tensile Strength, 50 (345) Tensile ModulusR(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF 400 (2758) Tensile Strength, 40 (276) TensileModulus R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF 300 (2068) Tensile Strength, 75 (517) TensileModulus R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF 220 (1517) Tensile Strength, 75 (517) TensileModulus R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF 325 (2241) Tensile Strength, 57 (393) TensileModulus R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF (OX) 400 (2758) Tensile Strength, 33 (228) TensileModulus R(1997) Tow or Yarn, Carbon Fibers forStructural Composites GF (OX) 400 (2758) Tensile Strength, 40 (276) TensileModulus R(1997) Tow, Carbon Fiber forStructural Composites 500 (3447) Tensile Strength, 32 (221) Tensile ModulusR(1997) Tow, Carbon Fiber forStructural Composites 550 (3792) Tensile Strength, 38 (262) Tensile ModulusR(1997) Carbon Fiber Tape and SheetEpoxy Resin Impregnated R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus,175 (347) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus,175 (347) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus,80 (176) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 80(176) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 80(176) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 80(176) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 175(347) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 210,000 (1448) Tensile, 20,000,000 (138) Modulus,175 (347) R(1994) Carbon Fiber Tape and SheetEpoxy Resin Impregnated G 200,000 (1379) Tensile, 18,000,000 (124) Modulus,80 (176) R(1994) Interleaf Carrier Material,Composite Tape or Broadgoods Paper, 0.004 Inch (0.10 mm), Perforated

Interleaf Carrier Material,Composite Tape Parchment, 0.004 in. (0.10 mm), Unperforated Interleaf Carrier Material,Composite Tape Polyethylene Film, Unperforated 0.0018 in. (0.046 mm) Interleaf Carrier Material,Composite Tape Polyethylene Coated Paper, Unperforated 0.0035 inch (0.089 mm) Interleaf Carrier Material,Composite Tape Paper, 0.004 inch (0.10 mm), Perforated Interleaf Carrier Material,Composite Tape Polyethylene Coated Paper, Perforated 0.0035 inch (0.089 mm) Organic Fiber (Para-Aramid),Yarn and Roving, High Modulus (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/22.5 Tensile Strength, 18(124)/1010 Tensile Modulus 195 (215 d tex) Denier, 0.6% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 17.5(121)/950 Tensile Modulus 380 Denier, (420 d tex), 0.6% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5(114)/900 Tensile Modulus 1140 Denier (1270 d tex), 0.6% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5(114)/955 Tensile Modulus 1420 Denier (1580 d tex), 0.6% Finish (R) Roving, Organic Fiber(Para-Aramid), High Modulus OR 450 (3103)/22.5 Tensile Strength, 17.5(121)/865 Tensile Modulus 7100 Denier, (7900 d tex), 0.6% Finish (R) Roving, Organic Fiber (Para-Aramid),High Modulus OR 500 (3447)/23.5 Tensile Strength, 17.5 (121)/890 TensileModulus 4560 Denier, (5070 d tex), 0.6% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/20.9 Tensile Strength, 16.5(114)/895 Tensile Modulus 2160 Denier, (2400 d tex), 0.6% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/22.6 Tensile Strength, 18(124)/1005 Tensile Modulus 195 Denier (215 d tex), 1.2% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 17.5(121)/970 Tensile Modulus 380 Denier (420 d tex), 1.2% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.9 Tensile Strength, 16.5(114)/945 Tensile Modulus 1140 Denier (1270 d tex), 1.2% Finish (R) Yarn, Organic Fiber(Para-Aramid), High Modulus OY 390 (2689)/23.8 Tensile Strength, 16.5(114)/950 Tensile Modulus 1420 (1580 d tex) Denier, 1.2% Finish (R) Yarn, Organic Fiber (Para-Aramid),High Modulus OY 390 (2689)/21.1 Tensile Strength, 16.5 (114)/900 TensileModulus 2160 (2400 d tex) Denier, 1.2% Finish Cloth, Organic Fiber(Para-Aramid), High Modulus for Structural Composites Cloth, Organic Fiber(Para-Aramid), High Modulus Epoxy Resin Impregnated R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 120, 175 (350) R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 181, 175 (350) R(1994)

Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 281, 175 (350) R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 328, 175 (350) R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 120, 80 (180) R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 181, 80 (180) R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 281, 80 (180) R(1994) Cloth, Organic Fiber, HighModulus Epoxy Resin Impregnated OC Style 328, 80 (180) R(1994) Glass Tape and Flat Sheet,Non-Woven Cloth Epoxy Resin Impregnated, for Hand and Machine Layup R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 120(248) R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III36 -120 (248) R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-26 150(302) R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III26 -150 (302) R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 150(302) R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-I-36 95(203) R(1997) Glass Non-Woven Fiber Tape andFlat Sheet Epoxy Resin Impregnated, for Hand and Machine Layup GL-III33 - 95(203) R(1997) Radomes, Foam SandwichPolyimide/Quartz Cloth Construction R(1994) Aluminum Alloy, Sheet andPlate 0.12 Cu (1100-H14) Strain Hardened (UNS A91100) Selection and Application ofRelays for Proper Performance Aluminum Alloy Foil 1.0Mg -0.6Si - 0.30Cu - 0.20Cr (6061-0) Annealed R(1995) Ring, Retaining - External,Spiral Wound, Heavy & Medium Duty CRES, Metric R(1991) Ring, Retaining - Internal,Spiral Wound, Heavy & Medium Duty CRES, Metric R(1991) Pin, Straight, Headless AMS5688, Metric R(1991) Pin, Straight, Headless AMS5732, Metric R(1991) Ring, Retaining - External,Tapered, Type I, Class 2 AMS 5520, Metric R(1991) Aluminum Alloy, Alclad Sheetand Plate, 1.0Mg - 60Si - 0.28Cu - 0.20Cr (Alclad 6061-0) Annealed (UNSA86061) Ring, Retaining - Internal,Tapered, Type I, Class 1 AMS 5520, Metric R(1991)

Aluminum Alloy, Sheet andPlate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061 -T4 Sheet, -T451 Plate)Solution Heat Treated and Naturally Aged Aluminum Alloy Sheet and Plate(2014; -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated UNSA92014 Ring, Retaining - Internal,Beveled, Tapered, Type II Class 1 AMS 5520, Metric R(1991) Ring, Retaining - External,Reinforced E-Ring, Type I Class 3 AMS 5520, Metric R(1991) Rings, Retaining - SpiralWound, Uniform Section Corrosion Resistant, Procurement Specification for,Metric FSC 5365 R(2000) Aluminum Alloy Sheet andPlate, Alclad One Side 4.4Cu - 1.5Mg - 0.60Mn Alclad One Side 2024 and 11/2%Alclad One Side 2024-T3 Sheet 1-1/2% Alclad One Side 2024- T351 Rings, Retaining - TaperedWidth, Uniform Thickness Corrosion Resistant, Procurement Specification for,Metric FSC 5365 R(2000) Washer, Key - 90 DegreeLocking, Cres, UNS S32100, Metric Washer, Key - 180 DegreeLocking, Cres, UNS S32100, Metric Washer, Key - 270 DegreeLocking, Cres, UNS S32100, Metric Washer, Key - Dual LockingPositions, Cres, UNS S32100, Metric Nut, Spanner - End Slots,Cupwasher Locked, UNS S66286, Silver Plated, MJ Thread, Metric Washer, Cup, Lock - SpannerNut AMS 5646, Metric FSC 5310 Aluminum Alloy, Sheet andPlate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651Plate) Solution and Precipitation Heat Treated UNS A97075 (R) Aluminum Alloy, Plate6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7451) Solution Heat Treated, StressRelieved, and Overaged UNS A97050 Aerospace Fluid Power -Cleanliness Classification for Hydraulic Fluids Aluminum Alloy, Drawn, RoundSeamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219T8511)Solution Heat Treated, Stress Relieved by Stretching, and Precipi Sealing Integral Fuel Tanks Pins, Procurement Specificationfor, Metric FSC 5315 R(2000) Aluminum Alloy, Drawn, Round,Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-0) Annealed (UNS A95052) Aluminum Alloy Tubing,Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061T4)Solution Heat Treated and Naturally Aged UNS A96061 Aluminum Alloy, Seamless DrawnTubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and PrecipitationHeat Treated Aluminum Alloy Tubing,Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061T6)Solution and Precipitation Heat Treated Ref. UNS 96061 Aluminum Alloy Sheet 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T61) Solution and Precipitation Heat TreatedR(1995)

Aluminum Alloy Sheet 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T761) Solution Heat Treated and Overaged R(1995) Aluminum Alloy, Plate 1.6Cu -2.2Mg - 0.22Cr - 5.7Zn (7475-T7651) Solution Heat Treated, Stress Relieved byStretching, and Precipitation Heat Treated UNS A97475 Aluminum Alloy, Plate 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T651) Solution Heat Treated, Stress Relieved,and Precipitation Heat Treated UNS A97475 Adapter, Assembly - PortConnection Ring Locked to Flareless Tube End FSC 4730 Aluminum Alloy Alclad Sheet5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (ALClad 7475-T761) Solution and PrecipitationHeat Treated UNS A87475 Aluminum Alloy Die Forgings(7050-T74) Solution Heat Treated and Overaged UNS A97050 Aluminum Alloy, Hand Forgings6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T7452) Solution Heat Treated,Compression Stress-Relieved, and Overaged (UNS A97050) Aluminum Alloy Forgings 7.7Zn- 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated(UNS A97049) R(1995) Aluminum Alloy, Rolled or ColdFinished Bars, Rods, and Wire 4.4Cu - 1.5Mg - 0.60Mn (2024) Solution HeatTreated and Naturally Aged (T4) Solution Heat Treated, Cold W Aluminum Alloy Bars, Rods, andWire, Rolled or Cold Finished 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014T6)Solution and Precipitation Heat Treated UNS A92014 Aluminum Alloy, Die and HandForgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solutionand Precipitation Heat Treated (UNS A97075) (Supersedes AMS 4 Aluminum Alloy, Forgings andRolled or Forged Rings (6061-T6) Solution and Precipitation Heat Treated UNSA96061 Aluminum Alloy Die Forgings4.4Cu - 0.85Si - 0.80Mn (2025-T6) Solution and Precipitation Heat Treated UNSA 92025 Aluminum Alloy Die and HandForgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni -0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treat Aluminum Alloy Forgings andRolled Rings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution andPrecipitation Heat Treated UNS A92014 Aluminum Alloy, Die Forgings4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat Treated UNS A9201401 1997 Aluminum Alloy Die Forgings5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation HeatTreated Aluminum Alloy Forgings andRolled or Forged Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219T6)Solution and Precipitation Heat Treated R(1995) Aluminum Alloy, Hand Forgingsand Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219T852/T851)Solution Heat Treated, Mechanically Stress Relieved, and Prec Aluminum Alloy Forgings andRolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 - T4) SolutionHeat Treated and Naturally Aged R(1995) Aluminum Alloy Forgings 5.6Zn- 2.5Mg - 1.6Cu - 0.23Cr(7075-T7352) Solution Heat Treated, Stress Relievedby Compression, and Overaged UNS A97075 R(2000) Bolt, Spline Drive ExtendedWasher, Reduced Shank, AMS 5662, Metric

Aluminum Alloy Die Forgings(7175-T66) Solution and Precipitation Heat Treated UNS A97175 Aluminum Alloy, Die and HandForgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and PrecipitationHeat Treated UNS A97175 Clamp, Loop-Cushioned,Integral Lock R(1993) Aluminum Alloy Extrusions7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T73511) Solution Heat Treated, StressRelieved, and Overaged (UNS A97049) Aluminum Alloy, Extrusions7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049-T76511) Solution Heat Treated, StressRelieved, and Overaged UNS A97049 Aluminum Alloy, Extrusions6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T8511) Solution Treated,Stress Relief Stretched, Straightened, and Precipitation Heat Treat Aluminum Alloy, Extrusions6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated,Stress-Relieved by Stretching, and Straightened UNS A92219 (R) Aluminum Alloy, Extrusions5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Solution Heat Treated, StressRelieved by Stretching, and Overaged (UNS A97075) Wrenches; Flare Nut, Crowfoot,12-Point Nondistorting R(1999) Aluminum Alloy, Flash WeldedRings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and PrecipitationHeat Treated (UNS A97075) Nut, Self Locking - HexExtended Washer UNS N07001, Silver Plate, MJ THD, Metric Aluminum Alloy Forgings 5.6Zn- 2.5Mg - 1.6Cu - 0.23Cr (7175-T7452) Solution Heat Treated, Stress Relieved,and Precipitation Heat Treated UNS A97175 R(2000) Filler Metal, Aluminum Brazing10Si - 4.0Cu (4145) Filler Metal, Aluminum Brazing12Si (4047) Aluminum Alloy Bars, Rods, andWire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) asFabricated R(1994) Bolt, Machine, Spline Drive,Special Extended Washer, Reduced Head, PD Shank, AMS 5662, Metric Screw, Machine, 100 DegreeCSK, Flat Head, Offset Cruciform Recess, Full Shank, UNS S66286, MJ Thread,Metric Aluminum Alloy Welding Wire5.2Si (4043) (UNS A94043) Sheet and Strip Surface FinishNomenclature R(1995) Aluminum Alloy Plate 7.7Zn -2.4Mg - 1.6Cu - 0.16Cr (7049-T7351) Solution Heat Treated, Stress Relieved,and Precipitation Heat Treated R(1995) Aluminum Alloy Plate 6.2Zn -2.3Cu - 2.2Mg - 0.12Zr (7050-T7651) Solution Heat Treated, Stress Relieved,and Overaged UNS A97050 Aluminum Alloy Plate 5.7Zn -2.2Mg - 1.6Cu - 0.22Cr (7475-T7351) Solution Heat Treated, Stress Relieved byStretching, and Precipitation Heat Treated R(1994) Aluminum Alloy, Plate 6.2Zn -1.8Cu - 2.4Mg - 0.13Zr (7010-T7651) Solution Heat Treated, Stress Relieved,and Precipitation Heat Treated Aluminum Alloy, Plate 6.2Zn -1.8Cu - 2.4Mg - 0.13Zr (7010-T73651) or (7010-T7451) Solution Heat Treated,Stress Relieved, and Precipitation Heat Treated

Aluminum Alloy Sheet, Alclad5.7Zn - 2.2Mg - 1.6Cu - 0.22Cr (7475- T61) Solution and Precipitation HeatTreated (UNS A87475) R(1994) (R) Aluminum Alloy, Castings5.0Si - 1.2Cu - 0.50Mg (355.0-T6) Solution and Precipitation Heat Treated(UNS A03550) Aluminum Alloy, Welding Wire4.5Cu - 0.70Ag - 0.30Mn - 0.25Mg - 0.25Ti (201) (UNS A02010) Aluminum Alloy Castings, 4.6Cu- 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T71) Solution and Precipitation HeatTreated UNS A12060 R(2000) Aluminum Alloy Castings 4.6Cu- 0.35Mn - 0.25Mg - 0.22Ti (A206.0-T4) Solution Heat Treated and NaturallyAged UNS A12060 R(2000) (R) Aluminum Alloy, WeldingWire 4.6Cu - 0.35Mn - 0.25Mg - 0.22Ti for Welding A206.0 Type Alloys Aluminum Alloy, Welding Wire5.0Si - 1.2Cu - 0.50Mg (355) (UNS A03550) Aluminum Alloy, Welding Wire7.0Si - 0.52Mg (357) (UNS A03570) Aluminum Alloy, Hand Forgings7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7049- T7352) Solution Heat Treated, StressRelieved by Compression, and Precipitation Heat Treated (UNS Aluminum Alloy Hand Forgingsand Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061- T652) Solution HeatTreated, Stress Relief Compressed, and Precipitation Heat Tr Aluminum Alloy, Sheet 2.4Li -1.3Cu - 0.95Mg - 0.10Zr (8090-T6) Solution and Precipitation Heat Treated(Unrecrystallized) (R) Aluminum Alloy Castings,Investment 7.0Si - 0.32Mg (356.0-T51) Precipitation Heat Treated UNS A03560 Aluminum Alloy, Alclad FlatSheet 4.1Cu - 1.4Mg - 0.45Mn (Alclad 2424-T3) Solution Heat Treated and ColdWorked UNS A82424 Jet Reference Fluid Study forFuel Tank Sealants (R) Aluminum Alloy Castings,Permanent Mold 5.0Si - 1.2Cu - 0.50Mg (355.0- T6) Solution and PrecipitationHeat Treated UNS A03550 Handles and Attachments forHand Socket Wrenches Rings, Retaining - SpiralWound, Uniform Section Corrosion and Heat Resistant, UNS S66286 FSC 5365 Boron-Aluminum Composite Sheet50 v/o 5.6B, 6061-0, for Diffusion Bonding R(1994) Aluminum Alloy, Sheet 8.6Fe -1.8Si - 1.3V (8009-H112) Powder Metallurgy Product, Strain Hardened (UNSA98009) Aluminum Alloy Extrusions8.6Fe - 1.8Si - 1.3V (8009- H112) Powder Metallurgy Product, StrainHardened(UNS A98009) Aluminum Alloy, Rolled orForged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation He Aluminum Alloy, Rolled orForged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation

Aluminum Alloy, Rolled orForged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation Aluminum Alloy Rings, Rolledor Forged 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T651, 2014-T652) SolutionHeat Treated, Mechanically Stress Relieved, and Precipitation Aluminum Alloy Forgings 7.7Zn- 2.5Mg - 1.5Cu - 0.16Cr (7149-T73) Solution and Precipitation Heat TreatedR(1994) Aluminum Alloy Forgings 7.7Zn- 2.5Mg - 1.5Cu - 0.16Cr (7049-01) High Temperature Annealed Tubing, Flared, StandardDimensions for, Design Standard Aluminum Alloy, Forgings 7.8Zn- 2.2Mg - 1.6Cu - 0.15Cr (7249-T74 and -T7452) Aluminum Alloy, Extrusions6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T76511) Solution Heat Treated, StressRelieved, Straightened, and Overaged UNS A97050 Aluminum Alloy, Extrusions6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T73511) Solution Heat Treated, StressRelieved by Stretching, Straightened, and Overaged UNS A97050 Aluminum Alloy, Extrusions6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, StressRelieved, Straightened, and Overaged UNS A97050 Aluminum Alloy, Extrusions7.7Zn - 2.4Mg - 1.6Cu - 0.16Cr (7149-T73511) Solution Heat Treated, StressRelieved by Stretching, and Overaged (UNS A97149) Grease, Pneumatic System FSC9150; Should Be Used Instead of MIL-G-4343C, Which Was Cancelled on 10September 1999 Metric Wrenches; NondistortingFlare Nut R(1999) Nut, Fitting, Retained Sheet and Plate, MagnesiumAlloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B-0) Annealed and Recrystallized (UNSM11311) R(1995) Plate, Magnesium Alloy 3.0Al -1.0Zn - 0.20Mn (AZ31B- H26) Cold Rolled and Partially Annealed R(1995) Sheet and Plate, MagnesiumAlloy 3.0Al - 1.0Zn - 0.20Mn (AZ31B- H24) Cold Rolled, Partially AnnealedR(1995) Sealing Compound, Topcoat,Fuel Tank, Buna-N Type FSC 8030 Nut - Self-Locking Clinch, SerratedShank, Hole Preparation, Installation and Removal Procedures Nut, Self-Locking, UNS S66286,1200 Degrees F, 160 000 psi, UNJ Thread FSC 5310 Magnesium Alloy Welding Wire9.0Al - 2.0Zn (AZ92A) UNS M11922 Fitting End, Flared TubeConnection, Design Standard Fitting End, Bulkhead, FlaredTube Connection, Design Standard Nuts, Self-Locking, Alloy,Corrosion and Heat Resistant High Strength, All Metal, Dry Film Lubricated,1400 Degree F (760 Degree C), Procurement Specification

Magnesium Alloy, Sand Castings2.5Ag - 2.1Di - 0.70Zr (QE22A-T6) Solution and Precipitation Heat Treated(UNS M18220) Magnesium Alloy, InvestmentCastings 8.7Al - 0.70Zn - 0.22Mn (AZ91C-T6) Solution and Precipitation HeatTreated (UNS M11914) Magnesium Alloy, InvestmentCastings 9.0Al - 2.0Zn (AZ92A-T 6) Solution and Precipitation Heat Treated(UNS M11920) Magnesium Alloy, InvestmentCastings 10Al (AM100A-T6) Solution and Precipitation Heat Treated (UNSM10100) Barkhausen Noise Inspectionfor Detecting Grinding Burns in High Strength Steel Parts R(1996) Magnesium Alloy Castings,Permanent Mold 9.0Al - 2.0Zn (AZ92A-T6) Solution and Precipitation HeatTreated Copper, Sheet, Strip, andPlate Soft Annealed UNS C11000 Copper Alloy (Brass), Sheet,Strip, and Plate 70Cu - 30Zn Annealed (061) (UNS C26000) Bolts and Screws, Steel, UNSS66286 Tensile Strength 160 ksi, Procurement Specification FSC 5306 Copper Alloy (Brass), Sheet,Strip, and Plate 70Cu - 30Zn Half Hard (H02) (UNS C26000) Socket Wrenches, Hand (Metric)R(1999) Copper-Beryllium Alloy,Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00,Formerly AT) (UNS C17200) Silicon Bronze Bars, Rods,Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved R(1994) Aluminum Bronze, Bars, Rods,Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and StressRelieved (HR50) or Temper Annealed (TQ50) (UNS C63000) Copper-Beryllium Alloy, Barsand Rods 98Cu - 1.9Be (CDA 172) Hard Temper UNS C17200 Nut, Retained, Short FlarelessFSC 4730 R(2000) Pi-Bus Aerospace Standard, GlandDesign, O-Ring and Other Elastomeric Seals Solder, Tin-Lead 45Sn - 55Pb Copper Alloy, Brazing Filler Metal52.5Cu - 38Mn - 9.5Ni 1615 to 1700 Degrees F (879 to 927 Degrees C)Solidus-Liquidus Range UNS C69950 Silver Alloy, Brazing FillerMetal 56Ag - 42Cu - 2.0Ni 1420 to 1640 Degrees F (771 to 893 Degrees C)SolidusLiquidus Range UNS P07560 Silver Alloy, Brazing FillerMetal 85Ag - 15Mn 1760 Degrees to 1780 Degrees F (960 Degrees to 971 DegreesC) Solidus-Liquidus Range UNS P07850 Silver Alloy, Brazing FillerMetal 92.5Ag - 7.2Cu - 0.22Li 1435 to 1635 Degrees F (779 to 891 Degrees C)Solidus-Liquidus Range UNS P07925

Silver Alloy Brazing FillerMetal 50Ag - 18Cd - 16.5Zn - 15.5Cu 1160 to 1175 Degrees F (627 to 635Degrees C) Solidus-Liquidus Range UNS P07500 Silver Alloy, Brazing FillerMetal 50Ag - 16Cd - 15.5Zn - 15.5Cu - 3.0Ni 1170 to 1270 Degrees F (632 to688 Degrees C) Solidus-Liquidus Range UNS P07501 Silver Alloy, Brazing FillerMetal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 Degrees F (718 to 857 Degrees C)Solidus-Liquidus Range UNS P07540 Silver Alloy, Brazing FillerMetal 60Ag - 30Cu - 10Sn 1115 to 1325 Degrees F (602 to 718 Degrees C)SolidusLiquidus Range UNS P07600 Silver Alloy Brazing FillerMetal 63Ag - 28.5Cu - 6.0Sn - 2.5Ni 1275 to 1475 Degrees F (691 to 802Degrees C) Solidus-Liquidus Range UNS P07630 Nickel Alloy, Brazing FillerMetal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 to 1970 Degrees F (977to 1077 Degrees C) Solidus-Liquidus Range UNS N99600 R(2000) Nickel Alloy, Brazing FillerMetal 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon) 1790 to 1970 Degrees F(977 to 1077 Degrees C) Solidus-Liquidus Range UNS N99610 R( Nickel Alloy, Brazing FillerMetal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 to 1830 Degrees F (971 to 999Degrees C) Solidus-Liquidus Range UNS N99620 R(2000) Nickel Alloy, Brazing FillerMetal 92Ni - 4.5Si - 3.1B 1800 to 1900 Degrees F Solidus-Liquidus Range (UNSN99630) Nickel Alloy, Brazing FillerMetal 94Ni - 3.5Si - 1.8B 1800 to 1950 Degrees F (982 to 1066 Degrees C)SolidusLiquidus Range (UNS N99640) Manganese Alloy, BrazingFiller Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 Degrees F (966 to 1024Degrees C) Solidus-Liquidus Range UNS M26800 Nickel Alloy, Brazing FillerMetal 71Ni - 10Si - 19Cr 1975 to 2075 Degrees F (1080 to 1135 Degrees C)Solidus-Liquidus Range (UNS N99650) Cobalt Alloy, High TemperatureBrazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100Degrees F (1121 to 1149 Degrees C) Solidus- Liquidus Range Gold-Palladium-Nickel Alloy,Brazing Filler Metal, High Temperature 50Au - 25Pd - 25Ni 2015 to 2050 DegreesF (1102 to 1121 Degrees C) Solidus-Liquidus Range UNS P005 Gold-Palladium-Nickel AlloyBrazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130Degrees F (1135 to 1166 Degrees C) Solidus-Liquidus Range Gold-Palladium-Nickel Alloy,Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915Degrees F (1007 to 1046 Degrees C) Solidus-Liquidus Range UNS P00 Gold-Nickel Alloy, BrazingFiller Metal, High Temperature 82Au - 18Ni 1740 Degrees F (949 Degrees C)Solidus-Liquidus Temperature UNS P00820 Bearings, Babbitt 91Sn - 4.5Sb- 4.5Cu (UNS L13910) Bearings, Sintered MetalPowder 89Cu - 10Sn Oil Impregnated Bearings, Leaded Copper 70Cu -28.5Pb Steel Back UNS C98400 R(1994) Bearings, Leaded Bronze 80Cu -10Pb - 10Sn Steel Back R(1994) Fittings, 37 Degree Flared,Fluid Connection, Standard 05 1995

Castings, Leaded Bronze, Sandand Centrifugal 80Cu - 10Sn - 9.5Pb as Cast (UNS C93700) R(1994) Fittings and Bosses, PipeThreaded, Fluid Connection, Standard 05-1995 Fittings, 37 Degree Flared toPipe Threaded, Fluid Connection,Standard 05 1995 Fittings, Beaded, FluidConnection, Standard 05 1995 Fittings, Beaded to 37 DegreeFlared, Fluid Connection, Standard 05 1995 Fittings, Beaded to PipeThreaded, Fluid Connection, Standard 05 1995 Flaring (Swaging) and Removalof Shank Nuts Leaded Red Brass, Sand andCentrifugal Castings 85Cu - 5.0Sn - 5.0Pb - 5.0Zn as Cast UNS C83600 Elbow, 45 Degree, Pipe,Internal and External Thread FSC 4730; Should Be Used Instead of AN915 REV11, Which Was Cancelled 8 February 1999 Tee, Pipe, Internal Thread FSC4730; Should Be Used Instead of AN917 REV 8, Which Was Cancelled 8 February1999 Cross, Pipe, Internal ThreadFSC 4730; Should Be Used Instead of AN918 REV 8, Which Was Cancelled on 8February 1999 Coupling, Pipe, InternalThread FSC 4730; Should Be Used Instead of AN910 REV 10, Which Was Cancelled8 February 1999 Manganese Bronze, Sand andCentrifugal Castings 58Cu - 39Zn - 1.2Fe - 1.0Al - 0.80Mn as Cast UNS C86500 Nipple, Pipe, External ThreadFSC 4730; Should Be Used Instead of AN911 REV 9, Which Was Cancelled on 8February 1999 Bushing, Pipe, Internal andExternal Thread FSC 4730; Should Be Used Instead of AN912 REV 9, Which WasCancelled on 8 February 1999 Manganese Bronze, Sand andCentrifugal Castings 63Cu - 24Zn - 6.2Al - 3.8Mn - 3.0Fe High Strength, asCast UNS C86300 Plug, Pipe, External ThreadFSC 4730; Should Be Used Instead of MS20913G, Which Was Cancelled on 28September 1999 Fittings, Straight ThreadedBoss or Flanged, Fluid Connection, Standard 05 1995 Fittings, Straight Thread Bossor Flanged to 37 Degree Flared, Fluid Connection, Standard 05 1995 Fittings, Flanged to Beaded,Fluid Connection, Standard 05 1995 Bolts and Screws, Nickel AlloyUNS N07718, Classification: 185 ksi/1200 Degrees F Procurement Specification,Standard FSC 5306 REV 09 1996 Aluminum Bronze Alloy,Centrifugal and Continuous-Cast Castings 81.5Cu - 10.3Al - 5.0Ni - 2.8FeQuench Hardened and Temper Annealed (UNS C95510) Copper-Beryllium AlloyCastings 97Cu - 2.1Be - 0.52Co - 0.28Si Solution Heat Treated (TB00) (UNSC82500)

Alloy Castings, Corrosion andHeat Resistant 66Ni - 29Cu - 4.0Si as Cast UNS N04019 Titanium Alloy, Sheet, Strip,and Plate 6Al - 4V Annealed (UNS R56400) Titanium Bars, Wire, Forgings,and Rings Commercially Pure 70.0 ksi (483 MPa) Yield Strength R(1995) Titanium Alloy, Seamless,Hydraulic Tubing 15V - 3.0Cr - 3.0Al - 3.0Sn Cold Worked and PrecipitationHeat Treated Titanium Alloy, Bars, Wire,and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength (UNS R54520) Titanium Alloy Bars, Wire,Forgings, Rings, and Drawn Shapes 6AI - 4V Annealed UNS R56400 Titanium Alloy Bars, Forgings,and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, FractureToughness (UNS R56400) Titanium Alloy Extrusions andFlash Welded Rings 6Al - 4V Annealed Beta Processed R(1994) Titanium Tubing, WeldedAnnealed, 40,000 psi (276 MPa) Yield Strength R(1994) Titanium Tubing, Seamless Annealed,40,000 psi (275 MPa) Yield Strength UNS R50400 Titanium Alloy, Hydraulic,Seamless Tubing 3.0Al - 2.5V Annealed (UNS R56320) Titanium Welding WireCommercially Pure Environment Controlled Packaging R(1994) Titanium Alloy Welding Wire6Al - 4V, Extra Low Interstitial Environment Controlled Packaging R(1994) (R) Titanium Alloy, Round Barand Wire 3Al - 8V - 6Cr - 4Mo - 4Zr Consumable Electrode Melted Solution HeatTreated and Cold Drawn (UNS R58640) Titanium Alloy Wire 13.5V -11Cr - 3A1 Spring Temper (UNS R58010) Titanium Alloy, Bars, Wire,Forgings, and Rings 6.0Al - 4.0V Annealed, Heat Treatable, Modified Strength(UNS R56400) Titanium Alloy, Bars, Wire,Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged (UNS R56400) Titanium Alloy, Forgings 5AI -2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength UNS R54520 Titanium Alloy Bars, Wire, andForgings 7A1 - 4Mo Solution and Precipitation Heat Treated (UNS R56740)R(1994) Titanium Alloy, Bars, Wire,Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable (UNS R56620) Titanium Alloy Bars, Wire, andRings 8Al - 1Mo - 1V Solution Heat Treated and Stabilized R(1994) Titanium Alloy, Bars, Wire,and Rings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 0.08Si Solution and PrecipitationHeat Treated (UNS R54620)

Titanium Alloy, Forgings 6.0A1- 2.0Sn - 4.0Zr - 2.0Mo Solution and Precipitation Heat Treated (UNS R54620) Titanium Alloy Bars, Wire,Forgings, and Rings 6A1 - 6V - 2Sn Annealed (UNS R56620) Titanium Alloy, Bars, Wire,Forgings, and Rings 6AI, 6V - 2Sn Solution and Precipitation Heat Treated UNSR56620 Titanium Alloy Bars, Wire, andForgings 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo Solution and Precipitation HeatTreated R(1994) Titanium Alloy Wire 44.5 Cb(UNS R58450) Titanium Alloy, Forgings 10V -2Fe - 3Al Consumable Electrode Melted, Single-Step Solution Heat Treated andAged 180 ksi (1241 MPa) Tensile Strength Spring Pins, Tubular, CoiledCorrosion Resistant Nickel Base Alloy, Procurement Specification for (FSC5315) Titanium Alloy Forgings 10V -2Fe - 3Al Consumable Electrode Melted, Solution Heat Treated and Aged 173 ksi(1193 MPa) Tensile Strength Steel,Chrome-Nickel-Molybdenum (E4340) Bars and Reforging Stock Rubber Cellular Sheet, Moldedand Hand-Built Shapes; Latex Foam Should Be Used Instead of MIL-R-5001, WhichWas Cancelled on December 18, 1998 Air Filling Valves Steel Bars, Forgings, andTubing, Free-Cutting 1.5Mn - 0.25Pb (0.32 - 0.39C) (11L37) (UNS G11374) Steel Bars, Forgings, andTubing, Free Cutting 0.14 - 0.20C (SAE 1117) UNS G11170 Steel, Bars, Forgings, andTubing, Free-Cutting 1.5Mn (0.32 - 0.39C) (SAE 1137) UNS G11370 (R) Steel, Welding Wire 1.05Cr- 0.55Ni - 1.0Mo - 0.08V (0.26 - 0.32C) Vacuum Melted, EnvironmentControlled Packaging (UNS K22925) (R) Steel, Welding Wire 1.05Cr- 0.55Ni - 1.0Mo - 0.07V (0.34 - 0.40C) Vacuum Melted, EnvironmentControlled Packaging UNS K23725 (R) Steel, Welding Wire 0.06Carbon, Maximum, Specification UNS K00606 11 1996 Steel Sheet and Strip,Aluminum Coated Low Carbon R(1994) Steel, Sheet and Strip 0.15Carbon, Maximum Deep Forming Grade UNS G10100 Steel, Sheet and Strip 0.15Carbon, Maximum Forming Grade (UNS G10100) Steel, Sheet and Strip 0.15Carbon, Maximum Half Hard Temper (UNS G10100) Steel, Sheet and Strip 0.25Carbon, Maximum Hard Temper (UNS G10200)

Steel Tubing, Seamless 0.15Carbon, Maximum Annealed Steel Tubing, Welded 0.13Carbon, Maximum Annealed R(1994) Steel, Bars, Forgings, andTubing 0.13 - 0.18C SAE 1015; UNS G10150 Steel, Low Carbon, Bars andWire 0.08 to 0.20 C (UNS K00802) Steel, Low Carbon Bars,Forgings, Tubing, Sheet, Strip, and Plate 0.25 Carbon, Maximum (UNS K02508) Tubing, Carbon Steel (1025),(Aircraft Quality) Steel Tubing, Seamless 0.22 -0.28C (SAE 1025) Cold Drawn and Stress Relieved (UNS G10250) R(1994) Steel Tubing, Welded (0.22 -0.28C) (SAE 1025) Normalized or Stress Relieved R(1994) Steel Bars, Forgings, andTubing 0.31 - 0.38C (SAE 1035) R(1994) Steel Sheet, Strip, and Plate0.47 - 0.55C (SAE 1050) Annealed UNS G10500 Carbon Steel, Wire 0.75 -0.88C (SAE 1080) Spring Temper, Cold Drawn (UNS G10800) Steel Strip 0.68 - 0.80C (SAE1074) R(1994) Sheet and Strip, Steel (0.90 -1.04C) (SAE 1095) UNS G10950 R(1999) Steel Strip (0.90 - 1.04C)(SAE 1095) Hard Temper UNS G10950 R(1999) Tube End - Beaded, DesignStandard FSC 4730; Should Be Used Instead of MS33660D, Which Was Cancelled 10May 2000 Steel, Bars 0.90 - 1.30C Fitting End - Hose Connection,Design Standard FSC 4730; Should Be Used Instead of MS33658A, Which WasCancelled on 20 July 1999 Desiccant Port and DesiccantHolder Fitting, Bolt, Flared FSC4730; Should Be Used Instead of AN774 REV 7, Which Was Cancelled on 28September 1999 (R) Fitting, Bolt, FluidPassage FSC 4730; Should Be Used Instead of AN775 REV 13, Which Was Cancelledon 28 September 1999 Fitting, Connector, MultipleFluid Pressure Line, 45 Degree FSC 4730 Fitting, Connector, MultipleFluid Pressure Line, Tee FSC 4730 Fitting, Plug, Tube End,Flared FSC 4730; Should Be Used Instead of the Following Two Flared FittingStandards, Which Were Cancelled on 28 September 1999: AN806 REV 7

Fitting, Port Plug and BleederFSC 4730; Should Be Used Instead of the Following Two Flared FittingsStandards, Which Were Cancelled on 28 September 1999: AN814 REV 1 Fitting, Adapter, Port,Reducer FSC 4730; Should Be Used Instead of AN893 and MS24397, Which WasCancelled on 26 May 2000; SAE 5202, Reference within SAE AS 5172, Has Fitting, Bushing, Port,Reducer FSC 4730; Should Be Used Instead of AN894 and MS 24398, Which WasCancelled on 26 May 2000; SAE AS 5202, Referenced within SAE AS 5173 Fitting, Union and Reducer,Flared FSC 4730; Should Be Used Instead of the Following Four Flared FittingStandards, Which Were Cancelled on 28 September 1999: AN815 R Fitting, Sleeve, Flared FSC4730; Should Be Used Instead of MS20819G, Which Was Cancelled on 28 September1999 Nut, Fitting, Bulkhead FSC4730; Should Be Used Instead of AN924 REV 11, Which Was Cancelled on 16 March2000 Nut, Fitting, Port FSC 4730;Should Be Used Instead of AN6289 REV 7, Which Was Cancelled on 28 September1999 Fitting, Adapter, Bulkhead,Flared to Hose FSC 4730; Should Be Used Instead of AN807 REV 6, Which WasCancelled on 28 September 1999 Fitting, Elbow, 90 Degree,Bulkhead, Flared to Hose FSC 4730; Should Be Used Instead of AN838, Rev 8,Which Was Cancelled on 20 July 2000 Fitting, Elbow, 45 Degree,Bulkhead, Flared to Hose FSC 4730; Should Be Used Instead of AN839, Rev 7,Which Was Cancelled on 20 July 2000 Fitting, Adapter, Hose toStraight Pipe FSC 4730; Should Be Used Instead of AN840 REV 9, Which WasCancelled on 28 September 1999 Fitting, Adapter, Flared toHose FSC 4730; Should Be Used Instead of AN841 REV 5, Which Was Cancelled on28 September 1999 Fitting, Elbow, 90 Degree,Pipe to Hose FSC 4730; Should Be Used Instead of AN842, Rev 11, Which WasCancelled on 20 July 2000 Fitting, Elbow, 45 Degree,Pipe to Hose FSC 4730; Should Be Used Instead of AN844, Rev 11, Which WasCancelled on 20 July 2000 Fitting, Elbow, 45 Degree,Bulkhead, Hose FSC 4730; Should Be Used Instead of AN846, Rev 7, Which WasCancelled on 20 July 2000 Fitting, Elbow, 90 Degree,Bulkhead, Hose FSC 4730; Should Be Used Instead of AN848, Rev 11, Which WasCancelled on 20 July 2000 Fitting, Adapter, Hose FSC4730; Should Be Used Instead of AN849 REV 11, Which Was Cancelled on 28September 1999 (R) Fitting, Adapter, StraightPipe to Flared FSC 4730; Should Be Used Instead of AN816 REV 13, Which WasCancelled on 19 May 2000 Fitting End, External TaperPipe Thread, Design Standard FSC 4730 Iron-Nickel Alloy, Strip 49Fe- 5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 10%Reduction (UNS N09902) Iron-Nickel Alloy Strip 49Fe -5.3Cr - 42Ni - 2.5Ti - 0.55Al Solution Heat Treated, Cold Rolled, 50%Reduction UN N09902 R(1994) Insulating Components, Molded,Electrical, Heat Shrinkable, Connector and Cable Accessory, Sealing StrainRelief, General Specification for

Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight ShouldBe Used in Place of MS3109, Dash Numbers 11 Through 18, W Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right AngleShould Be Used in Place of MS3117, Dash Number 11 Through 18, Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, LowProfile Should Be Used in Place of MS3109, Dash Numbers 1 T Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle,Low Profile Should Be Used in Place of MS3117, Dash Numbers Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Straight, LowProfile, Miniature Insulating Components, Molded,Electrical, Heat Shrinkable, Boot, Strain Relief and Sealing, Right Angle,Low Profile, Miniature Insulating Components, Molded,Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T Insulating Components, Molded,Electrical, Heat Shrinkable, Strain Relief and Sealing, Y Insulating Components, Molded,Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, 1 to 3 Insulating Components, Molded,Electrical, Heat Shrinkable, Transition, Strain Relief and Sealing, T Storage of AerospaceElastomeric Seals and Seal Assemblies Which Include an Elastomer ElementPrior to Hardware Assembly FSC 5330 (R) Steel, Investment Castings0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615) Normalized UNS J11442 Steel, Investment Castings0.50Cr - 0.55Ni - 0.20Mo (0.25 - 0.35C) (SAE 8630 Mod) Normalized andTempered (UNS J13042) (R) Steel, Maraging,Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum MeltedHomogenized, Overaged, and Solution Heat Treated (UNS J93150) (R) Steel, Maraging,Investment Castings 17Ni - 10Co - 4.6Mo - 0.30Ti - 0.06Al Homogenized,Overaged, and Solution Heat Treated (UNS J93010) (R) Steel, CorrosionResistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization,Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) T (R) Steel, CorrosionResistant, Investmment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization,Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) (R) Steel, CorrosionResistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization,Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) T (R) Steel, CorrosionResistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution andPrecipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (R) Steel, CorrosionResistant, Investment, 13Cr Free Machining; Hardened and Tempered UNS J91161 (R) Steel, Corrosion andModerate Heat Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened andTempered UNS J91152 (R) Steel, CorrosionResistant, Investment Casting, 17Cr - 0.55Mo (0.95 - 1.20C) Annealed UNSJ91639

Steel, Corrosion Resistant,Investment Castings 16Cr - 1.8Ni - 0.08N as Cast UNS J91651 (R) Steel, Corrosion and HeatResistant, Investment Castings 13Cr - 2.0Ni - 3.0W Hardened and Tempered UNSJ91631 Couplings, Clamp, Grooved,V-Band Couplings, Clamp, Grooved,V-Band, 1.75 to 14.25 Flange OD (-65 to 800 Degrees F) FSC 5340 Couplings, Clamp, Grooved,V-Band, 1.75 to 6.25 Flange OD (-65 to 250 Degrees F) FSC 5340 Couplings, Clamp, Grooved,V-Band, 1.75 to 14.25 Flange OD (-65 to 1200 Degrees F) FSC 5340 (R) Steel, CorrosionResistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution andPrecipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength ( Coupling, Fuel Line, Flexible,125 psi General Specification for Should Be Used Instead of MIL-C85061B,Which Was Cancelled on 24 August 1999 (R) Steel, CorrosionResistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution HeatTreated, Precipitation Hardenable (UNS J92110) (R) Steel, Corrosion and HeatResistant, Investment Castings 17Cr - 13Ni - 1.9Mo Solution Heat Treated (UNSJ92951) Steel, Corrosion and HeatResistant, Investment Castings 19Cr - 12Ni - 1.0(Cb + Ta) Solution HeatTreated UNS J92811 (R) Steel, Corrosion and HeatResistant, Investment Castings 25Cr - 20Ni (CK-20) as Cast (UNS J94211) (R) Steel, Corrosion and HeatResistant, Investment Castings 19Cr - 9.5Ni Solution Heat Treated (UNSJ92620) Fuse, Current Limiter Type,Aircraft Nickel Alloy, Corrosion andHeat Resistant, Investment Castings, 73Ni - 12Cr - 4.5Mo - 2.0Cb - 0.70Ti -0.05C 6.0Al - 0.010B - 0.10Zr Vacuum Cast, as Cast (UNS N077 Valves, Safety, Cabin Air,General Specification for (R) Cobalt Alloy, Corrosionand Heat Resistant, Investment Castings 50.5Co - 26Cr - 15Ni - 6.0Mo as CastUNS R30030 Cobalt Alloy, Corrosion and HeatResistant, Investment Castings 54Co - 25.5Cr - 10.5Ni - 7.5W as Cast (UNSR30031) Nickel Alloy, Corrosion andHeat Resistant, Investment Castings 52.5Ni - 19Cr - 3.0Mo - 5.1(Cb+Ta) -0.90Ti 0.60Al - 18Fe Vacuum Melted Homogenization and Solution Alloy Castings, Investment,Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al -0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation He (R) Cobalt Alloy, Corrosionand Heat Resistant, Investment Castings 62Co - 27Cr - 2.8Ni - 5.5Mo as CastUNS R30021 (R) Nickel Alloy, Corrosionand Heat Resistant, Investment Castings 47.5Ni - 22Cr - 1.5Co - 9Mo - 0.60W -18.5Fe as Cast (UNS N06002) Nickel Alloy, Corrosion andHeat Resistant, Investment Castings 73Ni - 13Cr - 4.5Mo - 2.3Cb - 0.75Ti -6.0Al 0.010B - 0.10Zr Vacuum Cast, as Cast (UNS N07713)

Steel, Corrosion Resistant,Sand and Centrifugal Castings 16Cr - 4.1Ni - 0.22(Cb + Ta) - 2.8Cu SolutionHeat Treated UNS J92200 Nickel Alloy, Corrosion andHeat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -1.6Al 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated (R) Steel, Corrosion Resistant,Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and PrecipitationHeat Treated (H935) 170 ksi (1172 MPa) Tensile Strength ( (R) Nickel Alloy, Corrosionand Heat Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb VacuumMelted, Vacuum Cast as Cast (UNS N26625) (R) Nickel Alloy, Corrosionand Heat Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb VacuumMelted, Vacuum Cast as Cast, Specification UNS N26625 09 1996 Fitting, Union, Tube, .375Bulkhead FSC 4730; Should Be Used Instead of AN832 and MS24393 That WereCancelled on 11 February 2000 Steel Castings, Vacuum Melted,Vacuum Cast, Investment, Corrosion Resistant 13Cr - 8.0Ni - 2.2Mo 1.1Al(195,000 psi (1344 MPa) Tensile Strength (Condition H1000) Ho Hydraulic Systems, Aircraft,Design and Installation Requirements for FSC 1650; Should Be Used Instead ofMIL-H-5440H, Which Was Cancelled on 13 September 1999 Steel, Corrosion Resistant,Sheet, Strip, and Plate 17Cr (SAE 51430) Annealed (UNS S43000) Steel Sheet, Strip, and Plate,Corrosion and Heat Resistant 12.5Cr (SAE 51410) Annealed UNS S41000 R(1995) Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 12Cr (SAE 51410 Modified) FerriteControlled, Annealed (UNS S41000) Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40-C) (SAE 51420) AnnealedR(1995) Steel Sheet, Strip, and Plate,Corrosion and Heat Resistant 17Cr-13Ni-2.5Mo (SAE 30316L) Solution HeatTreated UNS S31603 R(2000) Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 13Cr - 2.0Ni - 3.0W Annealed (CompositionSimilar to UNS S41800) Steel, Corrosion and HeatResistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) SolutionHeat Treated UNS S32100 Steel, Corrosion ResistantSheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated UNS S30403 Steel, Corrosion and Heat Resistant,Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) Solution HeatTreated UNS S34700 Steel, Corrosion Resistant,Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated UNSS30400 Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated UNSS30200 Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 125 ksi (862 MPa) TensileStrength UNS S30100 Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 150 ksi (1034 MPa)Tensile Strength UNS S30100

Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 185 ksi (1276 MPa)Tensile Strength UNS S30100 Steel, Corrosion and HeatResistant, Sheet, Strip, Foil, and Plate 15Cr - 7.1Ni - 2.5Mo - 1.1AlSolution Heat Treated, Precipitation Hardenable UNS S15700 Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 25Cr - 20Ni (SAE 30310S) Solution HeatTreated UNS S31008 R(2000) Steel, Corrosion andResistant, Sheet, Strip, and Plate 23Cr - 13.5Ni (SAE 30309S) Solution HeatTreated Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 18Cr - 13Ni - 2.5Mo (SAE 30316) SolutionHeat Treated UNS S31600 Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B -0.30V 1800 Degrees F (982 Degrees C) Solution Heat Treated (UNS Steel, Corrosion Resistant,Sheet, Strip, and Plate 17Cr - 7.1Ni - 1.1A1 Solution Heat Treated,Precipitation Hardenable UNS S17700 R(2000) Steel, Corrosion Resistant,Sheet and Strip 17Cr - 7.1Ni - 1.1AL Solution Heat Treated and Cold Rolled,Precipitation Hardenable 0.0015 to 0.050 Inch (0.038 to 1.27 m Iron Alloy, Corrosion and HeatResistant, Sheet, Strip, and Plate 30Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W -1.0Cb - 0.15N Solution Heat Treated (UNS R30155) Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W18.5Fe Solution Heat Treated UNS N06002 R(2000) Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W18.5Fe Solution Heat Treated (UNS N06002) UNS N06002 R(200 Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed UNSN06600 R(2000) Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -0.70A1 7.0Fe Annealed UNS N07750 R(2000) Alloy, Corrosion and HeatResistant, Sheet, Strip, and Plate 57 Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti -1.4Al 0.05Zr - 0.006B Consumable Electrode or Vacuum Inductio Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti -1.5Al 0.006B Vacuum Induction and Consumable Electrode Melt Steel, Corrosion and HeatResistant, Sheet and Strip 15.5 Cr - 4.5Ni - 2.9Mo - 0.10N Solution HeatTreated Steel, Corrosion and HeatResistant, Sheet and Strip 16.5Cr - 4.5Ni - 2.9Mo - 0.10N 1850 to 1975Degrees F (1010 to 1079 Degrees C) Annealed UNS S35000 Alloy, Corrosion and HeatResistant, Sheet, Strip, and Plate 46Fe - 20.5Cr - 32Ni - 1.1Ti Annealed (UNSN08801) Nickel, Sheet and Strip Low(0.02 Max) Carbon Annealed (UNS N02201) Steel, Corrosion and HeatResistant, Seamless Tubing 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Annealed UNS S35000 Steel, Corrosion and HeatResistant, Seamless or Welded Hydraulic Tubing 18Cr - 11Ni - 0.70Cb (SAE30347) Solution Heat Treated (UNS S34700) Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Thin WallSolution Heat Treated (UNS S34700)

Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Thin WallSolution Heat Treated (UNS S32100) Steel, Corrosion Resistant,Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution Heat Treated UNS S30400 Steel, Corrosion and HeatResistant, Welded and Drawn or Seamless and Drawn Tubing 9.0Mn - 20Cr - 6.5Ni0.28N High-Pressure Hydraulic UNS S21900 Steel, Corrosion and HeatResistant, Seamless Tubing 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat TreatedUNS S21904 Steel, Corrosion Resistant,Tubing 19Cr - 10Ni (SAE 30304) High-Pressure Hydraulic, Welded PlusUltrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper Steel, Corrosion Resistant,Welded Tubing 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated UNS S30400 Steel, Corrosion Resistant,Seamless or Welded Hydraulic Tubing 19Cr - 10Ni (SAE 30304) High Pressure,Cold Drawn UNS S30400 Steel, Corrosion Resistant,Seamless or Welded Tubing 19Cr - 10Ni (SAE 30304) Hydraulic, Annealed (UNSS30400) Steel, Corrosion and HeatResistant, Seamless Tubing 18Cr - 11Ni - 0.40Ti (SAE 30321) Solution HeatTreated UNS S32100 Steel, Corrosion and HeatResistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Solution HeatTreated UNS S34700 R(2000) Steel, Corrosion and HeatResistant, Seamless Tubing 25Cr - 20Ni (SAE 30310S) Solution Heat Treated(UNS S31008) Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (SAE 30347) Solution HeatTreated UNS S34700 Steel, Corrosion and HeatResistant, Welded Tubing 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution HeatTreated UNS S32100 Steel, Corrosion and HeatResistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu VacuumInduction Plus Consumable Electrode Vacuum Melted Solution Heat Treate Nickel Alloy, Corrosion and HeatResistant, Seamless Tubing 74Ni - 15.5Cr - 8.0Fe Annealed UNS N06600 Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al -7.0Fe Annealed (UNS N07750) Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al -7.0Fe Solution Heat Treated (UNS N07750) Steel, Corrosion and HeatResistant, Seamless and Welded Hydraulic Tubing 17Cr - 12Ni - 1.5Mo - 0.03Cmax Cold Drawn, 1/8 Hard Temper UNS S31603 Alloy, Corrosion and HeatResistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb -0.15N Solution Heat Treated (UNS R30155) Nickel Alloy, Corrosion andHeat Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 2.9Ti - 1.4Al0.006B - 0.08Zr Consumable Electrode or Vacuum Induction Me Clamp, Loop, Plain, Support,Aircraft Nickel Alloy, Corrosion andHeat Resistant, Welded Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W 18.5FeSolution Heat Treated UNS N06002

Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti -0.50A1 18Fe Consumable Electrode or Vacuum Induction Melted 177 Nickel Alloy, Corrosion andHeat Resistant, Seamless Tubing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti -0.50Al 18Fe Consumable Electrode or Vacuum Induction Melted 195 Steel, Corrosion and HeatResistant, Tubing, Seamless, 12.5Cr (SAE 51410) Annealed UNS S41000 Iron-Nickel Alloy, Corrosionand Heat Resistant, Sheet, Strip, and Plate 44Fe - 18.5Cr - 35Ni - 1.15SiSolution Heat Treated (UNS N08330) Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo -3.2W 18.5Fe Solution Heat Treated (UNS N06333) Steel, Corrosion Resistant,Sheet, Strip, and Plate 9.0Mn - 20Cr - 6.5Ni - 0.28N Solution Heat TreatedUNS S21904 Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50Al - 18Fe Consumable Electrode or Vacuum Inducti Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Me Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate, 72Ni - 15.5Cr - 0.95 (Cb + Ta) -2.5Ti 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 72Ni - 15.5Cr - 0.95(Cb + Ta) - 2.5Ti0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Me Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo 3.7(Cb+Ta)Annealed UNS N06625 Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo 3.7(Cb+Ta)Annealed UNS N06625 Steel, Corrosion Resistant,Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution HeatTreated, Precipitation Hardenable (UNS S17400) Compass; Magnetic, Pilot'sStandby FSC 6605; Should Be Used Instead of MIL-C-5604B, Which Was Cancelledon 31 August 1999 Cobalt Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W 0.07LaSolution Heat Treated (UNS R30188) Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr - 0.12Cb (SAE 51410Modified) Ferrite Controlled, Annealed UNS S41040 Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 12.5Cr - Low Carbon (SAE 51416, 51416Se)Free- Machining UNS S41600, S41623 Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 12Cr Ferrite Controlled,Annealed Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 12.5Cr (SAE 51410)Annealed (UNS S41000) Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 12Cr - 0.50Mo Annealed (UNS S41025) Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 13Cr - 2.0Ni - 3.0WAnnealed UNS S41800 Steel Bars, Wire, andForgings, Corrosion Resistant 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum InductionPlus Vacuum Consumable Electrode Melted Solution Heat Treated, Preci

Steel, Corrosion Resistant,Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) ConsumableElectrode Vacuum Melted UNS S44004 Steel, Corrosion and HeatResistant, Bars, Wire,and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420Se)FreeMachining Grade UNS S42020 (Type 2); S42023 (Type 1) Steel, Corrosion Resistant,Bars, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al VacuumInduction Plus Consumable Electrode Melted Solution Heat Treated Steel, Corrosion Resistant,Bars, Wire, and Forgings 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) (UNSS44004) Steel, Corrosion Resistant,Bars, Wire, and Forgings 17Cr - 0.50Mo (0.95 - 1.20C) (SAE 51440F) FreeMachining, Annealed UNS S44020 (Type I), UNS S44023 (Type II) Steel, Corrosion Resistant,Bars, Wire, and Forgings 18Cr - 9Ni - 0.21Pb (303Pb) Free- Machining,Solution Heat Treated Steel, Corrosion Resistant,Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn100 ksi (689 MPa) Tensile Strengh (UNS S30200) Steel, Corrosion Resistant,Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated and Cold Drawn125 ksi (862 MPa) Tensile Strength UNS S30200 R(2000) Steel, Corrosion Resistant,Bars and Forgings 0.14S - 18Cr - 9.5Ni - 0.50Mo - 0.80Al Free-MachiningSwaging or Upsetting Solution Heat Treated (UNS S30345) Steel, Corrosion Resistant,Bars, Wire, Forgings, Tubing, and Rings 19Cr - 10Ni Solution Heat Treated(UNS S30400) Steel, Corrosion Resistant,Bars, Wire, and Forgings 18Cr - 9.0Ni Free Machining (UNS S30300 (Type 1)) (UNS S30323 (Type 2)) (UNS S30310 (Type 3)) Steel, Corrosion Resistant,Bars, Wire, and Forgings 18.5Cr - 10Ni - 0.22Se (SAE 30303Se) FreeMachining;Swaging or Upsetting Solution Heat Treated UNS S30323 R(2000 Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining,Solution Heat Treated UNS S34720 Type 1; UNS S34723 Type 2 R(2000 Steel, Corrosion Resistant,Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30(Cb+Ta) 4.0CuSolution Heat Treated, Precipitation Hardenable UNS S17400 Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 18Cr - 11Ni - 0.60Cb (SAE30347) Solution Heat Treated (UNS S34700) Steel, Corrosion Resistant,Bars, Wire, Forgings, Tubing, and Rings 19Cr - 9.5Ni Solution Heat Treated(UNS S30403) Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 18Cr - 13Ni - 2.1Mo Free Machining SolutionHeat Treated (UNS J92200) Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 23Cr - 13.5Ni (SAE 30309S)Solution Heat Treated (UNS S30908) Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 17Cr - 12Ni - 2.5MoSolution Heat Treated (UNS S31603) Steel, Corrosion and HeatResistant, Bars, Wire, and Forgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V(0.200.25C) Hardened and Tempered (UNS S42200) Steel, Corrosion Resistant,Bars, Wire, Forgings, Extrusions, and Rings 9.0Mn - 20Cr - 6.5Ni - 0.27NSolution Heat Treated UNS S21904 Steel, Corrosion Resistant,Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb 3.5CuConsumable Electrode Melted Solution Heat Treated, Precipitation

Nickel-Iron Alloy, Corrosionand Heat Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti -0.015B 34Fe Consumable Electrode or Vacuum Induction Melted Sol Nickel-Iron Alloy, Corrosionand Heat Resistant, Bars, Forgings, and Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti0.015B - 35Fe Consumable Electrode or Vacuum Induction Me Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb -0.90Ti 0.50A1 - 18Fe Consumable Electrode or Vacuum Induction Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 74Ni - 15.5Cr - 8.0Fe UNS N06600 Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo -3.65 (Cb+Ta) Annealed UNS N06625 Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -0.70Al 7.0Fe Equalized, Precipitation Hardenable (UNS N07750) Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 7.0Fe - 2.5Ti 1.0(Cb+Ta) - 0.70Al 2100 Degrees F (1149 Degrees C) Solution an Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti -0.70Al 7.0Fe Consumable Electrode or Vacuum Induction Melted Steel Wire, CorrosionResistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti - 2.0Cu PrecipitationHardenable, Spring Temper UNS S45500 R(2000) Steel, Corrosion and HeatResistant, Wire 18Cr - 11.5Ni - 0.70 (Cb+Ta) (SAE 30347) Solution HeatTreated Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 70Ni - 2.4 Mn - 15.5Cr - 3.0Ti - 7.0Fe (UNSN07092) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 80Ni - 20Cr Steel, Corrosion Resistant,Wire 17Cr - 7.1Ni - 1.1Al Cold-Drawn, Precipitation-Hardenable (UNS S17700) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe CompositionSimilar to UNS N06062 Steel, Corrosion and HeatResistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (SAE 30347) UNS S34781 Nickel Alloy, Corrosion andHeat Resistant Coating, Rods and Wire 78Ni - 20Cr Steel, Corrosion Resistant,Safety Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated, Cold Finished(Composition Similar to UNS S30500) Steel, Corrosion Resistant,Rivet Wire, 18Cr - 11.5Ni (SAE 30305) Solution Heat Treated UNS S30500 Nickel Alloy, Corrosion andHeat Resistant, Wire 74Ni - 15.5Cr - 8.0Fe Annealed (UNS N06600) Steel, Corrosion Resistant,Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper UNS S30200

Steel, Corrosion and HeatResistant, Wire 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated (UNSS32100) Steel, Corrosion and HeatResistant, Wire 17Cr - 12Ni - 2.5Mo (SAE 30316) Solution Heat TreatedComposition Similar to UNS S31600 Steel, Corrosion and HeatResistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo UNS S31680 Steel, Corrosion and HeatResistant, Welding Wire 27Cr - 21.5Ni (UNS S31080) Steel, Corrosion Resistant,Wire 19Cr - 9.5Ni (SAE 30304) Solution Heat Treated Nickel Alloy, Corrosion andHeat Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe No. 1Temper, Precipitation Hardenable UNS N07750 R(2000) Nickel Alloy, Corrosion andHeat Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe SpringTemper, Precipitation Hardenable UNS N07750 R(2000) Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb -1.8Ti Consumable Electrode or Vacuum Induction Melted 1800 Degree Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 41.5Ni - 16Cr - 37Fe - 2.9Cb -1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 Degree Nickel Alloy, Corrosion andHeat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al -0.05Zr 0.006B Consumable Electrode or Vacuum Induction Melted Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 58Ni - 19.5Cr - 13.5Co - 4.3Mo -3.0Ti 1.4Al Consumable Electrode or Vacuum Induction Melted 1 Nickel Alloy, Corrosion andHeat Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti -1.4Al 0.05Zr - 0.006B Consumable Electrode or Vacuum Inductio Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipi Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti1.6A1 - 0.006B Vacuum Melted, Solution and Precipitation He Iron-Nickel Alloy, HeatResistant, Bars, Forgings, and Rings 44Fe - 18.5Cr - 35.5Ni - 1.1Si SolutionHeat Treated (UNS N08330) Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo -3.2W 18.5Fe Solution Heat Treated UNS N06333 Steel Bars, Wire, Forgings,Tubing, Rings, and Extrusions, Corrosion Resistant 11.8 Cr - 2.5Ni - 1.8Mo -0.33V (0.08 - 0.15C) Annealed, Vacuum Arc or Electroslag Reme Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo -2.1Ti 0.006B - 0.30V Consumable Electrode Melted, 1800 Degrees Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo -2.1Ti 0.006B - 0.30V Consumable Electrode Melted 1800 Degrees F

Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti -0.006B 0.30V Consumable Electrode Melted, 1650 Degrees F (899 Steel, Corrosion and HeatResistant, Bars, Wire, Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti -0.006B 0.30V Consumable Electrode Melted 1650 Degrees F (899 D Steel Bars, CorrosionResistant 18Cr - 9Ni (SAE 30303F) Free Machining, High Yield StrengthSolution Heat Treated and Cold Worked UNS S30323 R(2000) Steel, Corrosion and HeatResistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution HeatTreated, Sub-Zero Cooled, Equalized, and Over-Tempered UNS S35500 Steel, Corrosion and HeatResistant, Bars and Forgings 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Heat Treated, 170ksi (1172 MPa) Tensile Strength (UNS S35500) Steel, Corrosion and HeatResistant, Bars and Forgings 16.5Cr - 4.5Ni - 2.9Mo - 0.10N Equalized andOverTempered UNS S35000 Alloy Bars and Forgings,Corrosion and Heat Resistant 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al -31Fe Consumable Electrode Vacuum Melted Solution and Precipitation Steel, Corrosion Resistant,Bars, Wire, Forgings, and Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) PremiumQuality for Bearing Applications, Double Vacuum Melted UNS S42 Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 47.5Ni - 22Cr - 1.5Co - 9.0Mo -0.60W 18.5Fe Solution Heat Treated (UNS N06002) Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 64Ni - 5.0Cr - 24.5Mo - 5.5FeSolution Heat Treated (UNS N10004) Alloy, Corrosion- Resistant,Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable ElectrodeVacuum Melted Solution Heat Treated for Work Strengthening (UNS Cobalt Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 52Co - 20Cr - 10Ni - 15W SolutionHeat Treated (UNS R30605) Steel, Corrosion ResistantBars, Forgings, Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.50 (Cb + Ta) -1.5Cu Solution Heat Treated UNS S45000 Steel, Corrosion Resistant,Bars, Wire, Forgings, Extrusions, and Rings 5.0 Mn - 22Cr - 12.5Ni - 2.2Mo -0.20Cb - 0.30N - 0.20V Solution Heat Treated UNS S20910 Alloy, Corrosion and HeatResistant, Bars and Forgings 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe SolutionHeat Treated (UNS N08800) Alloy, Corrosion and HeatResistant, Bars, Forgings, and Rings 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W -1.0Cb 0.15N - 31Fe Solution and Precipitation Heat Treated (UNS R Alloy, Corrosion and HeatResistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W -1.0(Cb+Ta) - 0.15N - 32Fe Solution Heat Treated UNS R30155 Nickel Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 74Ni - 7.0Cr - 16.5Mo Solution HeatTreated (UNS N10003) Cobalt Alloy, Corrosion andHeat Resistant, Bars, Forgings, and Rings 40Co - 22Cr - 22Ni - 14.5W 0.07LaSolution Heat Treated (UNS R30188) Steel, Corrosion and HeatResistant, Welding Wire 16.5Cr - 4.5Ni - 2.9Mo - 0.10N (UNS S35080) Steel, Corrosion and HeatResistant, Welding Wire 12.5Cr (SAE 51410) (UNS S41001) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 72Ni - 15.5Cr - 1.0Cb - 2.4Ti - 0.70Al - 7.0Fe(UNS N07069)

Covers, Aircraft Components,General Requirements for Steel, Corrosion and HeatResistant, Welding Wire 15.5Cr - 4.5Ni - 2.9Mo - 0.10N UNS S35500 Steel, Corrosion and HeatResistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20TiVacuum Induction Melted (UNS S63197) Steel, Corrosion and HeatResistant, Welding Wire 29Cr - 9.5Ni UNS S64299 Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe (UNS N10004) Cobalt Alloy, Corrosion andHeat Resistant, Hard Facing Rods and Wire 62Co - 29Cr - 4.5W - 1.2C UNSR30006 Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 54Co - 25.5Cr - 10.5Ni - 7.5W UNS R30031 Steel, Corrosion and HeatResistant, Welding Wire 20Cr - 10Ni - 0.75Cb High Ferrite Grade UNS S34780 Cobalt Alloy, Powder, PlasmaSpray 56.5Co - 25.5Cr - 10.5Ni - 7.5W Powder, Plasma Spray 95Ni -5Al (R) Iron Alloy, Corrosion andHeat Resistant Welding Wire 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb0.15N Annealed (UNS R30155) Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 52Co - 20Cr - 10Ni - 15W UNS R30605 Alloy Welding Wire, Corrosionand Heat Resistant 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (UNSN06002) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al -0.006B Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La UNS R30188 Iron-Nickel Alloy, Corrosionand Heat Resistant, Welding Wire 41Fe - 37.5Ni - 14Co - 4.8(Cb + Ta) 1.5TiVacuum Melted, Low Expansion UNS N19907 Steel, Corrosion and HeatResistant, Welding Wire 16.4Cr - 4.8Ni - 0.22 (Cb+Ta) - 3.6Cu Vacuum Melted(UNS S17480) Steel, Corrosion and Heat Resistant,Welding Wire 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V UNS K66286 Steel, Corrosion and HeatResistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V VacuumInduction Melted, Environment Controlled Packaging (UNS S66286 Steel, Corrosion and HeatResistant, Welding Wire 19Cr - 13Ni - 2.5Mo High Ferrite Grade, Trace ElementControlled Steel, Corrosion and HeatResistant, Flat Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800Degrees F (982 Degrees C) Solution Treated, Cold Drawn or Cold Roll Tube - Pitot, ElectricallyHeated Cobalt Alloy, Corrosion andHeat Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted UNSR30918

Steel, Corrosion and HeatResistant, Welding Wire 13Cr - 2.0Ni - 3.0W UNS S41800 Cobalt Alloy, Corrosion andHeat Resistant, Hardfacing Rod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo (UNSR30021) Steel, Corrosion Resistant,Welding Wire 12Cr (SAE 51410 Modified) Ferrite Control Grade (UNS S41081) UNSS41081 Steel, Corrosion and HeatResistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V VacuumInduction Melted UNS S41780 Steel, Corrosion and Heat Resistant,Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction MeltedUNS S41780 Steel, Corrosion and HeatResistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V (UNS S41780) Card-Compass Correction FSC6610 Steel, Corrosion Resistant,Welding Wire 16.4Cr - 4.8Ni - 0.22Cb - 3.6Cu UNS S17480 Steel, Corrosion and HeatResistant, Welding Wire 15Cr - 5.1Ni - 0.30Cb - 3.2Cu (UNS S15500) UNS S15500 Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al -0.006B Vacuum Induction Melted, Solution Heat Treated (UNS N Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5A1 VacuumInduction Melted UNS N07090 Nickel-Iron Alloy, Corrosionand Heat Resistant, Welding Wire 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B -35Fe (UNS N09901) Alloy, Corrosion and HeatResistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta0.30Al - 0.05Zr - 0.05La - 0.20N (UNS R30556) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al18Fe Consumable Electrode or Vacuum Induction Melted (UNS N Cobalt Alloy, Corrosion andHeat Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution HeatTreated and Cold Drawn (UNS R30003) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 72Ni - 3.0Mn - 20Cr - 2.5Cb (UNS N06082) Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb UNS N06625 Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La UNS N06635 Nickel Alloy, Corrosion andHeat Resistant, Welding Wire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al (UNS N06231) Steel, Corrosion and HeatResistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted (UNSS13889) Cobalt-Nickel Alloy, Corrosionand Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Cobalt-Nickel Alloy, Corrosionand Heat Resistant, Bars 19Cr - 36Co - 25Ni -7.0Mo - 0.50Cb - 2.9Ti - 0.20Al9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode

Cobalt-Nickel Alloy, Corrosionand Heat Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Alloy, Corrosion Resistant,Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable ElectrodeVacuum Melted Solution Heat Treated and Work Strengthened (UNS R Alloy, Corrosion Resistant,Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable ElectrodeVacuum Melted Solution Heat Treated, Work Strengthened, and Aged Alloy, Corrosion and HeatResistant, Bars and Forgings 53Ni - 15Cr - 18.5Co - 5.0Mo - 3.2Ti - 4.2A1 -0.03B Double Vacuum Melted Solution, Stabilization, and Precipit Steel, Corrosion and HeatResistant, Honeycomb Core Resistance Welded, Square Cell R(2000) Alloy Bars, Forgings, andRings, Corrosion and Heat Resistant 61Ni - 20.5Cr - 8.5Mo - 3.4Cb - 1.3Ti -5.0Fe Consumable Electrode or Vacuum Induction Melted Solution H Steel, Corrosion Resistant,Bars and Wire 19Cr - 10Ni (SAE 30304) High Yield Strength Solution HeatTreated and Cold Worked UNS S30400 Steel, Corrosion Resistant,Sheet, Strip, and Plate 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu MultipleMelted, Solution Heat Treated, Precipitation Hardenable UNS S45500 Steel, Corrosion Resistant,Sheet, Strip, and Plate 15Cr - 4.5Ni - 0.30Cb - 3.5Cu Consumable ElectrodeRemelted, Solution Heat Treated Precipitation Hardenable (UNS S Steel, Corrosion Resistant,Sheet, Strip, and Plate 15Cr - 6.5Ni - 0.75Mo - 0.60Cb - 1.5Cu Solution HeatTreated, Precipitation Hardenable UNS S45000 Steel, Corrosion Resistant,Plate 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable ElectrodeMelted Solution Heat Treated, Precipitation Hardenable UNS S Nickel, Corrosion and HeatResistant, Sheet and Strip Thoria Dispersion Strengthened 2.2ThO2 UNS N03260R(2000) Steel, Corrosion Resistant,Flat Wire 18Cr - 9.0Ni (SAE 30302) Spring Temper UNS S30200 Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7CbSolution Heat Treated (UNS N06625) Alloy, Corrosion and HeatResistant, Sheet, Strip and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45FeSolution Heat Treated UNS N08800 Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al -0.05La Consumable Electrode Melted, Solution Heat Treated (UNS N Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35Al -0.03La Solution Heat Treated (UNS N06230) (R) Nickel Alloy, Corrosionand Heat Resistant, Sheet, Strip, and Foil 62Ni - 21.5Cr - 9.0Mo - 3.7Cb ColdRolled and Annealed (UNS N06625/N06626) Steel, Corrosion Resistant,Bars, Wire, Forgings, and Wire 17Cr - 0.52Mo (0.95 - 1.20C) (SAE 51440C) forBearing Applications UNS S44004 Iron-Nickel Alloy, Bars,Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6Ti Solution HeatTreated, Precipitation Hardenable Multiple Melted, High Temperature, L Nickel Alloy, Corrosion andHeat Resistant, Bars Bars, Forgings and Rings 54Ni - 22Cr - 12.5Co - 9.0Mo -1.2Al Consumable Electrode or Vacuum Induction Melted Anneale Nickel Alloy, Corrosion andHeat Resistant, Plate 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Annealed (UNSN06617)

Nickel Alloy, Corrosion andHeat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2AlConsumable Electrode or Vacuum Induction Melted Annealed (UNS N06617) Nickel, Corrosion and HeatResistant, Bars, Forgings, and Extrusions Thoria Dispersion Strengthened2.2ThO2 Stress-Relieved UNS N03260 R(2000) Steel, Corrosion and HeatResistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 10.5Ni - 0.55Ti (SAE30321) Solution Heat Treated and Cold Drawn, One- Eighth Hard T Steel, Corrosion and HeatResistant, Seamless or Welded Hydraulic Tubing 18.5Cr - 11Ni - 0.80Cb (SAE30347) Solution Heat Treated and Cold Drawn, One- Eighth Hard Tem Steel, Corrosion Resistant,Bars, Wire, and Forgings 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) ConsumableElectrode Melted Under Pressure Steel Bars, Forgings, andTubing, Corrosion Resistant 14Cr - 2.1Mo - 0.30Cb - 1.0V (1.05 - 1.15C)Premium Aircraft Quality for Bearing Applications, Double Vacuum Mel Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat TreatedComposition Similar to UNS S30100 Steel, Corrosion Resistant,Sheet and Strip 18Cr - 8Ni (SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207MPa) Tensile Strength UNS S30100 Steel, Corrosion Resistant,Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/4 Hard, 125ksi (862 MPa) Tensile Strength UNS S30200 Steel, Corrosion Resistant,Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 1/2 Hard, 150 ksi (1034MPa) Tensile Strength UNS S30200 Steel, Corrosion Resistant,Sheet and Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, 3/4 Hard, 175 ksi (1207MPa) Tensile Strength UNS S30200 Steel, Corrosion Resistant,Sheet Strip 18Cr - 9.0Ni (SAE 30302) Cold Rolled, Full Hard, 185 ksi (1276MPa) Tensile Strength UNS S30200 Steel, Corrosion and HeatResistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (SAE 30316) ColdRolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength UNS S31600 Steel, Corrosion Resistant,Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 125 ksi (862MPa) Tensile Strength UNS S30400 Steel, Corrosion Resistant,Sheet and Strip 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 1/2 Hard, 150 ksi (1034MPa) Tensile Strength Composition Similar to UNS S30400 Steel Sheet and Strip,Corrosion Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 175 ksi (1207 MPa)Tensile Strength UNS S30400 Steel Sheet and Strip,Corrosion Resistant 19Cr - 9.2Ni (SAE 30304) Cold Rolled, 185 ksi (1276 MPa)Tensile Strength Composition Similar to UNS S30400 Nickel Alloy, Corrosion andHeat Resistant, Sheet, Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti0.50Al - 18Fe Consumable Electrode or Vacuum Induction Mel Steel, Corrosion Resistant,Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C)Vacuum Induction Plus Vacuum Consumable Electrode Melted (UNS S426 Steel, Bars, Wire, Forgings,Extrusions, Tubing, and Rings Wear, Galling, and Corrosion Resistant 5.0Mn -3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated (UNS S2 Alloy, Corrosion and HeatResistant, Bars, Forgings, and Rings 34Co - 3.0Cr - 28Ni - 30Cb - 5.5Al -0.008B 25.5Fe Multiple Melted, High Temperature, Oxidation Resis Slings, Aircraft, GeneralSpecification for FSC 1730; Should Be Used Instead of MIL-S-5944C, Which WasCancelled on 1 July 1999

Nickel Alloy, Corrosion andHeat Resistant, Bar and Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50AL19Fe Consumable Electrode or Vacuum Induction Melted 1775 D Marking; Standard Hose,Aircraft FSC 4720; Should Be Used Instead of MIL-M-6002A, Which Was Cancelledon 1 November 1999 Cylinders, Carbon DioxideFilled, Technical FSC 4220; Should Be Used Instead of MIL-C-601G(1), WhichWas Cancelled on 07 September 1999 Grease, Plug Valve, Gasolineand Oil Resistant, NATO Code Number G-363, Metric FSC 9150; Should Be UsedInstead of MIL-G-6032D, Which Was Cancelled on 10 September 19 Bearings, Ball, Bellcrank,Antifriction, Airframe FSC 3110 Bearings, Ball, Rod End,Double Row, Self-Aligning FSC 3110 Steel,Chrome-Nickel-Molybdenum (8735) Bars and Reforging Stock (Aircraft Quality) Conduit, Electrical, Flexible,Shielded, Aluminum Alloy for Aircraft Installations FSC 5975; Should Be Usedfor New Design Instead of MIL-C-6136, Which Was Inactivate Sound and Thermal Insulationfor Aircraft General Specification for the Installation of Cork and Rubber CompositionSheet; for Aromatic Fuel and Oil Resistant Gaskets Should be Used Instead ofMIL-C-6183, Which Was Cancelled on December 18, 1998 Steel Bars, Forgings, andTubing 1.5Cr - 3.5Ni (0.07 - 0.13 C) (SAE 3310) UNS K44910 Steel Bars, Forgings, andTubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) ConsumableElectrode Vacuum Remelted Normalized and Tempered Steel, Bars, Forgings, andTubing 1.2Cr - 3.2Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) (UNS G93106) Steel, Bars, Forgings, andTubing 1.2Cr - 3.25Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) Vacuum ConsumableElectrode Remelted (UNS G93106) Steel, Bars, Forgings, andTubing 1.2Cr - 3.25 Ni - 0.12Mo (0.07 - 0.13C) (SAE 9310) ElectroslagRemelted or Consumable Electrode Vacuum Remelted (UNS G93106) Steel, Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.11 - 0.17C) (SAE 8615) (UNS G86150) Steel Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) Steel Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) ConsumableElectrode Vacuum Melted UNS G86200 Steel, Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Arc orElectroslag Remelted UNS G86200 R(2001) Steel Bars, Forgings, andTubing 4.1Cr - 3.4Ni - 4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft- Qualityfor Bearing Applications Double Vacuum Melted Steel Bars, Forgings, andRings 0.50Cr - 0.55Ni - 0.20Mo (0.28 - 0.33C) (SAE 8630) Steel Tubing, Mechanical0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) UNS G87350 Steel Bars and Forgings,Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615) UNS G46150

Steel Bars and Forgings,Carburizing 1.8Ni - 0.25Mo (0.15 - 0.20C) (SAE 4617) R(1992) Steel Bars and Forgings,Carburizing 1.8Ni - 0.25Mo (0.17 - 0.22C) (SAE 4620) (UNS G46200) R(1994) Steel Bars, Forgings andTubing 0.50Cr - 1.8Ni - 0.25Mo (0.17 - 0.23C) (SAE 4320H) UNS H43200 Steel Bars and Forgings 0.25Mo(0.35 - 0.40C) (SAE 4037) UNS G40370 Low-Alloy Steel, Heat-Resistant,Bars, Forgings, and Tubing 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C) (UNS K23015) Transmitter, Pressure, Fuel,0-600 psi FSC 6620; Should Be Used Instead of MIL-T-6302B(2), Which WasCancelled on 16 August 1999 Steel Bars and Forgings, LowAlloy, Heat Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C) Low-Alloy Steel, Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C)(UNS K14675) Low-Alloy Steel,Heat-Resistant, Bars, Forgings, and Tubing 0.95Cr - 0.55Mo - 0.30V (0.40 -0.50C) UNS K14675 R(2000) Steel, Heat Resistant, Bars,Forgings, and Tubing; 0.95Cr - 0.55Mo - 0.30V (0.40 - 0.50C) Vacuum ArcRemelted UNS K14675 Steel Bars and Forgings 0.90Si- 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vacuum Arc orElectroslag Remelted UNS K71040 Steel Bars, Forgings, andRings 0.50Cr - 0.55Ni - 0.25Mo (0.33 - 0.38C) (SAE 8735) Steel Bars, Forgings, andRings 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400 Steel, Mechanical Tubing,0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400 Steel Bars, Forgings, andTubing 0.65Cr - 0.70Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740 Modified) (UNSK11640) Steel, Bars and Forgings0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 105 ksi (724MPa) Tensile Strength (UNS G87400) Steel Bars and Forgings 0.50Cr- 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) Heat Treated, 125,000 psi (862MPa) Tensile Strength Steel, Bars, Forgings, andTubing 0.50Cr - 0.55Ni - 0.25Mo (0.48 to 0.53C) (SAE 8750) (UNS K13550) Steel, Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Otherwise HeatTreated UNS G41300 Steel, Bars 0.95Cr - 0.20Mo(0.28 to 0.33C) (SAE 4130) Normalized (UNS G41300) Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) UNS G41300 Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Spheroidized UNS G41300

Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) UNS G41350 Steel Sheet, Strip, and Plate0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.30 - 0.35C) Steel Sheet, Strip, and Plate0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740) UNS G87400 Steel Sheet, Strip, and Plate0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) (UNS G43400) Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.28 - 0.33C) (SAE 4130) Normalized or Stress Relieved UNS G41300 Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.28 - 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength UNSG41300 Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.28 - 0.33C) (SAE 4130) 150 ksi (1034 MPa) Tensile Strength Steel Tubing, Seamless 0.95Cr- 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress Relieved (UNS G41350) Steel Bars, Forgings, andRings 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) Steel, Mechanical Tubing0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) (UNS G41300) Steel Tubing, Mechanical0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) UNS G41350 Steel, Welded Tubing 0.95Cr -0.20Mo (0.28 - 0.33C) (SAE 4130) (UNS G41300) Steel Tubing, Seam-Free, Round0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) 95.0 Ksi (655 MPa) Tensile Strength Steel, Welding Wire 0.50Cr -0.55Ni - 0.20Mo (0.18 - 0.23C) (SAE 8620) Vacuum Melted, EnvironmentControlled Packaging (UNS G86200) Steel Bars 1.0Cr - 0.20Mo -0.045Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130.0 ksi (896 MPa) YieldStrength Free Machining Steel, Mechanical Tubing0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) UNS G41400 Steel, Bars, Forgings, andRings 0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) Annealed (UNS G41400) Steel Sheet, Strip, and Plate,Low Alloy, Heat Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.27 - 0.33C) Steel Sheet, Strip, and Plate0.95Cr - 0.20Mo (0.38 - 0.43C) (SAE 4140) UNS G41400 Steel Sheet, Strip, and Plate0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) Annealed UNS K22950 Hose, Rubber, Wire-Wound,Synthetic, Ice Eliminating System FSC 4720; Should Be Used Instead of MIL-H6399B, Which Was Cancelled on 1 July 1999

Steel, Bars, Forgings, andTubing 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C) (UNS K33020) Steel, Hotwork Tool, Bars andForgings 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) Electroslag Remelted (ESR) orConsumable Electrode Vacuum Arc Remelted (VAR) Annealed (UNS T Steel Bars, Forgings, andTubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) Consumable ElectrodeRemelted UNS K23080 Steel, Bars and Forgings0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C) (4337) (UNS G43370) Steel Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum ConsumableElectrode Remelted UNS G43400 Steel, Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) (SAE 4340) (UNS G43406) SAE4340; UNS G43406 Steel, Bars, Forgings, andTubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.38 - 0.43C) ConsumableElectrode Vacuum Remelted Steel, Bars, Forgings, andTubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo - 0.08V (0.40 - 0.45C) ConsumableElectrode Vacuum Remelted (UNS K44220) Steel Bars, Forgings, andTubing 0.80Cr - 0.85Ni - 0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified98BV40) Steel Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.49 - 0.55C) UNS K22950 Steel, Bars, Forgings, andTubing 1.4Mn - 1.5Si - 0.30Cr - 1.8Ni - 0.40Mo (0.23 - 0.28C) ConsumableElectrode Vacuum Melted (UNS K32550) Steel Bars, Forgings, andTubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C) Consumable Electrode VacuumMelted Steel Bars, Forgings, andTubing 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.25 - 0.33C) (UNS K23080) Steel, Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C)(4335 Modified) UNSK23477 Steel Bars, Forgings, Tubing,and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) Consumable ElectrodeVacuum Melted UNS K33517 Steel, Bars, Forgings, Tubing,and Rings 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335Modified) (UNS K33517) Steel, Bars, Forgings, andTubing 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) Vacuum ConsumableElectrode Melted (UNS K24728) Steel Sheet, Strip, and Plate0.75Mn - 0.80Cr - 1.8Ni - 0.35Mo - 0.20V (0.33-0.38C) Steel Sheet, Strip, and Plate0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) Vacuum Consumable ElectrodeMelted, Annealed (UNS K33517) R(1994) Steel, Sheet, Strip, and Plate5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) (UNS T20811) Steel Sheet, Strip, and Plate1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.45 - 0.50C) Consumable Electrode VacuumMelted Steel Sheet, Strip, and Plate1.05Cr - 0.55Ni - 1.0Mo - 0.12V (0.42 - 0.48C) Consumable Electrode VacuumMelted, Annealed

Hose, Rubber, Aircraft PaintFinish Remover FSC 4720; Should Be Used Instead of MIL-H-6439A, Which WasCancelled on 1 November 1999 Steel, Bars, Forgings, andTubing 1.45Cr (0.98 - 1.10C) (SAE 52100) for Bearing Applications (UNSG52986) Steel Bars, Forgings, andTubing 1.45Cr (0.98 - 1.10C) (SAE 52100) Premium Aircraft- Quality,Consumable Electrode Vacuum Melted Steel, Bars, Forgings, andTubing 1.4Cr (0.98 - 1.10C) (SAE 52100) Electroslag Remelted UNS G52986 Steel, Bars, Forgings, andTubing 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) UNS G61500 Steel, Spring Wire andSprings, 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) Annealed and Cold Drawn UNSG61500 Shields, Protective, Aircraftand Missiles FSC 1730; Should Be Used Instead of MIl-S-6451E, Which WasCancelled on 1 July 1999 Steel, Welding Wire 0.30Cr - 1.8Ni- 0.40Mo - (0.23 - 0.28C) Vacuum Melted, Environment Controlled Packaging(UNS K32550) Steel Sheet, Strip, and Plate1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Consumable Electrode Melted Steel, Sheet, Strip and Plate0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150) (UNS G61500) (R) Steel, Welding Wire 1.0Cr- 1.0Mo - 0.12V (0.18 - 0.23C) Vacuum Melted (UNS K22720) Wire, Steel Welding 0.75Si -0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) UNS K11365 (R) Steel, Welding Wire 0.95Cr- 0.20V (0.28 - 0.33C) (SAE 6130), Specification UNS K13149 11-1996 Wire, Steel Welding 18.5Ni -8.5Co - 5.2Mo - 0.72Ti - 0.10Al Vacuum Melted, Environment ControlledPackaging UNS K93130 Wire, Steel Welding 2.0Cr -10Ni - 8.0Co - 1.0Mo - 0.02Al - 0.06V (0.10 - 0.14C) Vacuum Melted,Environment Controlled Packaging UNS K91971 Steel, CorrosionResistant,Welding Wire 5.2Cr - 0.55Mo UNS S50280 (R) Steel, Welding Wire 1.75Mn- 0.78Cr - 2.8Ni - 0.85Mo - (0.09 - 0.12C) Vacuum Melted, EnvironmentControlled Packaging, Specification 11-1996 Steel, Nitriding, Bars,Forging, and Tubing 1.6Cr - 0.35Mo - 1.1Al (0.38 - 0.43C) UNS K24065 Steel, Nitriding, Bars,Forgings, and Tubing, 1.1Cr - 3.5Ni - 0.25Mo - 1.2Al (0.21 - 0.26C) UNSK52355 Steel, Bars, Forgings, andTubing 0.50Cr - 0.12Mo (0.89 - 1.01C) UNS K19526 Steel Bars, Forgings, andTubing 0.80Cr (0.90 - 1.03C) for Bearing Applications Steel, Bars and Forgings 3.1Cr- 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Annealed HeatTreatable to 290 ksi (1999 MPa) Tensile Strength (UNS K92580)

Tie Down, Cargo, Aircraft,Type C-2 Steel, Bars, Forgings, andTubing 0.80Cr - 1.8Ni - 0.25Mo (0.38 - 0.43C) SAE 4340 Normalized andTempered UNS G43400 Steel, Bars and Forgings 5.0Cr- 1.3Mo - 0.50V (0.38 - 0.43C) (H-11) Consumable Electrode Vacuum Melted (UNST20811) Steel, Bars and Forgings 5.0Cr- 1.3Mo - 0.5V - (0.38 - 0.43C) UNS T20811 Steel Bars, Forgings, andTubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) Premium Aircraft Quality forBearing Applications Consumable Electrode Vacuum Melted UNS T11350 Steel Bars, Forgings, andTubing 4.1Cr - 4.2Mo - 1.0V (0.80 - 0.85C) Premium Aircraft-Quality forBearing Applications, Double Vacuum Melted UNS T11350 Steel, Maraging, Welding Wire18Ni - 8.0Co - 4.9Mo - 0.40Ti - 0.10Al Vacuum Induction Melted, EnvironmentControlled Packaging (UNS K92890) Steel Bars, Forgings, Tubing,and Rings, Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10Al Double Vacuum Melted,Annealed R(1992) Steel, Maraging, Sheet, Strip,and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti - 0.10Al Consumable Electrode Melted,Solution Heat Treated (UNS K92890) Steel Plate 2.0Cr - 10Ni -14Co - 1.0Mo (0.13 - 0.17C) Vacuum Melted, Normalized, and Overaged Steel, Sheet, Strip, and Plate0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Vacuum ConsumableElectrode Melted, Annealed UNS K91472 Steel, Bars, Forgings, Tubing,and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) ConsumableElectrode Vacuum Melted UNS K91472 01 1997 Steel, Bars, Forgings, Tubing,and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) ConsumableElectrode Vacuum Melted, Annealed UNS K91283 Steel, Bars and Forgings 2.0Cr- 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged,Specification UNS K92571 09 1996 Steel, Bars 0.95Cr - 0.20Mo(0.28 - 0.33C) (SAE 4130) Special Aircraft Quality Cleanliness Normalized(UNS G41300) Steel, Bars 0.95Cr - 0.20Mo(0.38 - 0.43C) (SAE 4140) Special Aircraft-Quality Cleanliness Normalized(UNS G41400) Steel Bars and Forgings 3.1Cr- 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted, Annealed (UNS K92580) Steel, Welding Wire 2.0Cr -10Ni - 14Co - 1.0Mo - (0.13 - 0.17C) Vacuum Melted, Environment ControlledPackaging (UNS K92571) Steel Bars and Forgings,Maraging 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted,Solution Heat Treated Plate, Maraging Steel 2.0Cr -10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) Double Vacuum Melted, Solution HeatTreated Spray Equipment, AircraftWindshield, Anti-Icing Tubing, Chrome-Molybdenum,4135 Steel, Seamless Aircraft Quality Tubing, Chrome-Molybdenum,(4130 or 8630) Steel, Seamless and Welded

Steel, Chrome-Molybdenum(4130) Bars and Reforging Stock (Aircraft Quality) Should Be Used Instead ofMIL- S-6758B, Which Was Cancelled on October 5, 1998 Tape and Sheet, Adhesive,Rubber and Cork Composition FSC 9320; Should Be Used Instead of MIL-T6841,Which Was Cancelled on 31 August 1999 Tubing, Steel, Corrosion-Resistant(S30400), Aeropsace Vehicle Hydraulic System 1/8 Hard Condition Elastomer, Synthetic, Sheets,Strips, Molded or Extruded Shapes, General Specification for Should Be UsedInstead of MIL-R-6855, Which Was Cancelled on December 18, 1 Welding, Resistance: Spot andSeam Heat Treatment of Steel RawMaterials Should Be Used Instead of MIL-H-6875, Which Was Cancelled on 2February 1999 Water Repellent, Window andWindshield, Glass and Plastic FSC 6850; Should Be Used Instead of MIL-W6882F, Which Was Cancelled on 30 September 1999 Ingot, Zinc Alloy (for SheetMetal Forming Dies) FSC 9650; Should Be Used Instead of MIL-I-7068A, WhichWas Cancelled on 23 August 1999 Tube, Aluminum Alloy,Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality Fittings, Cargo Tiedown,Aircraft FSC 1670; Should Be Used Instead of MIL-F-7092(2), Which WasCancelled on 07 September 1999 Sealing Compound, Polysulfide,Accelerator Required, for Aircraft Structures FSC 8030; Should Be UsedInstead of MIL-S-7124B, Which Was Cancelled on 27 September 1999 Insulation Blanket,Thermal-Acoustical FSC 5640; Should Be Used Instead of MIL-I-7171D, Which WasCancelled on 30 September 1999 Forging, Steel, forAircraft/Aerospace Equipment and Special Ordnance Applications AREA FORG;Should Be Used Instead of MIL-F-7190B, Which Was Cancelled on 10 Septemb Heat Treatment of WroughtCopper-Beryllium Alloys, Process for (Copper Alloys: Numbers C17000, C17200,C17300, C17500, and C17510) Should Be Used Instead of MIL-H-719 Aluminum Rivets, UNS A91100,99Al (1100-H14) (Superseding AMS 7220C) Aluminum Rivets, UNS A921172.5Cu - 0.3Mg (2117-T4) Procurement Specification FSC 532 Rivets, Carbon SteelProcurement Specification for FSC 5320 Rivets, Steel, CorrosionResistant 18Cr-9Ni Solution Heat Treated Procurement Specification for FSC5320 Rivets, Steel, Corrosion andHeat Resistant 18Cr- 10.5Ni-0.70(Cb + Ta) Solution Heat Treated ProcurementSpecification for FSC 5320 Rivets, Solid and Tubular,Nickel Alloy Corrosion and Heat Resistant 74Ni - 15.5Cr - 8.0Fe ProcurementSpecification for FSC 5320 Rivets, Solid, UNS N04400,Corrosion Resistant 67Ni - 31Cu Procurement Specification for Rivets, Blind, CorrosionResistant Alloy, 67Ni - 31Cu, Procurement Specification for FSC 5320 Rivets, UNS S66286, Steel,Corrosion and Heat Resistant, 80 ksi Shear Strength, ProcurementSpecification for FSC 5320 Rivets, Alloy, Corrosion andHeat Resistant 52Co-20Cr- 10Ni-15W Solution Heat Treated Procurement Specificationfor FSC 5320

Rivets, Nickel Alloy,Corrosion and Heat Resistant 47.5Ni-22Cr- 1.5Co-9.0Mo-0.60W-18.5 Fe; SolutionHeat Treated Procurement Specification for FSC 5320 Inserts, Screw Thread, HelicalCoil 19Cr-9.2Ni, Corrosion Resistant Steel, Procurement Specification for FSC5340 Inserts, Screw Thread, HelicalCoil 72Ni-15.5Cr- 0.95(Cb+Ta) -2.5Ti-0.70 Al-7.0Fe; Corrosion and HeatResistant Alloy, Procurement Specification for FSC 5340 Nuts, Self-Locking, Steel,Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use, UNThread Form FSC 5310 Nuts, Self-Locking, Steel,Corrosion and Heat Resistant High Strength, All Metal 1200 Degrees F Use, UNJThread Form FSC 5310 (R) Nuts, Self-Locking, NickelAlloy, UNS N07001 Classification: 180 ksi/1400 Degrees F ProcurementSpecification FSC 5310 Rings, Sealing,Tetrafluoroethylene/ Propylene Rubber (FEPM) Hydraulic Fluid and SyntheticOil Resistant 70 to 80 Rings, Sealing,Tetrafluoroethylene/ Propylene Rubber (FEPM) Hydraulic Fluid and SyntheticOil Resistant 85 to 95 Rings, Sealing,Perfluorocarbon (FFKM) Rubber High Temperature Fluid Resistant 70 - 80 Rings, Sealing, Butadiene-Acrylonitrile(NBR) Rubber Fuel Resistant, Low Shrinkage 65 - 75 R(2001) Rings, Butadiene-Acrylonitrile(NBR) Rubber, Molded Fuel and Low Temperature Resistant 70 - 80 Rings, Sealing, SiliconeRubber High Temperature Resistant, Low Compression Set 65 - 75 Rings, Sealing, FluorocarbonRubber General Purpose, High Temperature, Fuel and Oil Resistant 65 75R(2001) Rings, Sealing, Silicone (VSI)Rubber Heat-Resistant, Low Compression Set 70 - 80 R(2001) Rings, Sealing, SiliconeRubber Low Compression Set, Non-Oil Resistant 65 - 75 Rings, Sealing, Silicone(PVMQ) Rubber Low Outgassing, Space and Vacuum Service 45 - 55 Rings, Sealings, Butadiene-Acrylonitrile(NBR) Rubber Fuel Resistant 65 - 75 Rings, Sealing,Butadiene-Acrylonitrile (NBR) Rubber Fuel and Low Temperature Resistant 60 -70 Rings, Sealing,Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 - 75 Rings, Sealing, Fluorosilicone(FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 - 80 R(2001) Rings, Sealing,Butadiene-Acrylonitrile (NBR) Rubber Oil Resistant 65 - 75 Gaskets, Type XX EngineAccessory Drive Corrosion Resistant Steel Screen Reinforced ControlledPerformance Superseding AMS 7283A; FSC 5330

(R) Steel, Highly-StressedSprings 0.95Cr - 0.2V (0.48 - 0.53C) (SAE 6150) Case Hardened UNS G61500 Rings, Sealing, CastLeaded-Tin Bronze, 80Cu - 16Sn - 5Pb As Cast (UNS C92800) R(1994) Rings, Sealing, Cast TinBronze 80Cu - 19Sn As Cast (UNS C91300) R(1994) (R) Gasket, Metal O-RingCorrosion and Heat Resistant Steel Procurement Specification for (FSC 5330) Clamp, Loop Type Bonding FSC5340 Bracket, Support Clamp FSC5340 Balls, Steel, CorrosionResistant 17Cr Hardened (UNS S44002, S44003, S44004) R(1994) Bolts and Screws, Steel, LowAlloy Heat Treated, Roll Threaded (Superseding AMS 7452K) Bolts and Screws, Steel, LowAlloy, Heat Resistant 135 000 psi Tensile Strength, Normalized and Tempered,Roll Threaded (Superseding AMS 7454G) Bolts and Screws, Steel, LowAlloy, Heat Resistant Hardened and Tempered, Roll Threaded (Superseding AMS7455E) Studs, Steel, Low Alloy HeatTreated, Roll Threaded (Superseding AMS 7456H) Studs, Steel, Low Alloy, HeatResistant Normalized and Tempered, Roll Threaded 135 000 psi Tensile Strength(Superseding AMS 7458E) (R) Bolts and Screws, SteelUNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture RatedProcurement Specification FSC 5306 Bolts and Screws, TitaniumAlloy 6Al - 4V Procurement Specification for FSC 5306; Superseding AMS 7460DR(2000) Bolts and Screws, TitaniumAlloy 6Al - 4V Fatigue- Rated, Procurement Specification for (Superseding AMS7461C) (R) Bolts and Screws, NickelAlloy, UNS N07718 Tensile Strength 185 ksi Fatigue Rated; ProcurementSpecification FSC 5306 (R) Bolts and Screws, NickelAlloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated ProcurementSpecification FSC 5306 Bolts, Cobalt-Chromium-NickelAlloy UNS R30035, Tensile Strength 260 ksi, Procurement Specification FSC5306 Bolts and Screws, UNS N07041Nickel Alloy, Corrosion and Heat Resistant, 155 ksi, ProcurementSpecification FSC 5306 R(2000) Bolts and Screws, Steel,Corrosion and Moderate Heat Resistant Heat Treated, Roll Threaded (R) Bolts and Screws, NickelAlloy, UNS N07001 Tensile Strength 165 ksi, Corrosion and Heat ResistantProcurement Specification FSC 5306 Bolts and Screws, Steel,Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded Bolts and Screws Roll ThreadedProcurement Specification for FSC 5306 R(2000) Bolts and Screws, Steel,Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi ProcurementSpecification (FSC 5306) Bolts, Cobalt-Chromium-NickelAlloy , UNS R30159, Tensile Strength 260 ksi, Procurement Specification FSC5306

Bolts and Screws, Steel, UNSS66286 Tensile Strength 130 ksi, Procurement Specification FSC 5306 Bolts and Screws, Steel, UNSS66286 Classification: 130 ksi/1200 Degrees F; 1800 Degrees F Solution HeatTreated, Aged After Roll Threaded Procurement Specification f (R) Studs, Corrosion and HeatResistant Steel, UNS S66286 Tensile Strength 130 ksi 1800 Degrees F SolutionHeat Treated, Aged Before Roll Threading Procurement Specif Rings, Flash Welded Aluminumand Aluminum Alloys R(1991) Rings, Flash Welded Corrosionand Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or CobaltAlloys, or Precipitation-Hardenable Alloys Rings, Flash Welded Ferriticand Martensitic Corrosion- Resistant Steels (UNS S41000) Rings, Flash Welded Carbon andLow-Alloy Steels Rings, Flash Welded Titaniumand Titanium Alloys Magnets, Rare-Earth/ Cobalt,Permanent Powder- Metallurgy Product Magnets, Rare-Earth/ Cobalt,Permanent Samarium- Cobalt, 33/67 - 15 (119) 250 Magnets, Rare-Earth/ Cobalt,Permanent Samarium- Cobalt, 33/67 - 18 (143) 250 Nickel-Iron Alloy, Magnetic,Sheet and Strip Annealed Nickel-Iron Alloy, Magnetic,Sheet and Strip Cold Rolled, Half-Hard Temper Nickel-Iron Magnetic Alloy,Bars and Forgings (R) Iron, Commercially Pure,Bar, Sheet, Strip, and Plate Hot Rolled, Unannealed UNS K00095 Nickel-Iron Alloy, Magnetic, Sheetand Strip 50Ni - 50Fe Annealed, Forming Grade (UNS K95000) Nickel-Iron Alloy, Magnetic,Bars, Rods, Tubing, and Forgings 50Ni - 50Fe (UNS K95000) Steel, Corrosion-Resistant(18-8) Bars, Wire and Forging Stock (Aircraft Quality) FSC 9510 Lead Alloy Sheet andExtrusions 93Pb - 6.5Sb - 0.50Sn as Fabricated Tungsten Alloy Shapes,Sintered, High Density Iron-Nickel-Cobalt Alloy, Barsand Forgings 53Fe - 29Ni - 17Co Low Expansion, Glass Sealing UNS K94610 Iron-Nickel-Cobalt Alloy,Sheet, Strip, and Plate 53Fe - 29Ni - 17Co Low Expansion Glass Sealing,Annealed UNS K94610

Gold Wire and Ribbon 99.97AuAnnealed Steel Wire, Copper Clad 99Fe -0.32Mn Annealed Light, Desk, Aircraft FSC6230; Should Be Used Instead of MIL-L-7768B(1), Which Was Cancelled on 09August 1999 Light, Desk, Aircraft FSC6230; Should Be Used Instead of MIL-L-7768/1, Which Was Cancelled on 09August 1999 Panels, Information,Integrally Illuminated FSC 6220; Should Be Used Instead of MIL-P-7788F(1),Which Was Cancelled on 13 September 1999 Molybdenum Disulfide,Technical, Lubrication Grade Should Be Used Instead of MIL-M-7866C, Which wasCancelled on 21 September 1998 Beryllium Bars, Rods, Tubing,and Shapes 4.25BeO - 94Be High Micro-Yield Strength Beryllium Bars, Rods, Tubing,and Shapes High Ductility Grade Beryllium Bars, Rods, Tubing,and Shapes Optical Grade Beryllium Bars, Rods, Tubing,and Shapes Standard Grade Beryllium Bars, Rods, Tubing,and Shapes Instrument Grade Terminals, Lug: Splices,Conductor: Crimp Style, Copper, General Specification for FSC 5940; Should BeUsed Instead of MIL-T-7928G, Which Was Cancelled on 31 August 1 Terminals, Lug and Splices,Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Ring Tongue, BellMouthed, Type II, Class 1 (for 150 Degrees C Total Conductor T Terminals, Lug and Splices,Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for105 Degrees C Total Conductor Temperature FSC 5940; Should Be Terminals, Lug and Splices,Conductor, Crimp Style, Splice, Electric, (Permanent, Type II, Class 1) for150 Degrees C Total Conductor Temperature FSC 5940; Should Be Terminals, Lug and Splices,Conductor, Crimp Style, Copper Terminal, Lug, Crimp Style, Copper, Insulated,Ring Tongue, for Thin Wall Wire, Type II Class 1 for 105 Deg Terminals, Lug and Splices,Conductor, Crimp Style, Copper, Insulated, Rectangular Tongue, for Thin WallWire, Type II, Class 1 for 105 Degrees C Total Conductor Temp Terminal Lug and Splices,Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper,Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conducto Core Material, PlasticHoneycomb, Laminated Glass Fabric Base, for Aircraft Structural andElectronic Applications Should Be Used Instead of MIL-C-8073, Which Was Can Mobility, Towed AerospaceGround Equipment, General Requirements for Adapter, Aircraft, JackingPoint, Design and Installation of FSC 1730; Should Be Used Instead ofMIL-STD809B, Which Was Cancelled on 1 July 1999 Detector, Ice, Air IntakeDuct, Aircraft Engines and Airframe Systems, General Specification for Tubing, Steel, Corrosion-Resistant,(304), Annealed, Seamless and Welded

Steel Bars, Carbon, AISI(1095), Aircraft Quality FSC 9510; Should Be Used Instead of MIL-S-8559A,Which Was Cancelled on 24 September 1999 Binoculars, Prismatic, Hand-Held(for Aeronautical Use) (7 x 50 and 6 x 42 (Wide Field)) FSC 6650; Should BeUsed Instead of MIL-B-8568B, Which Was Cancelled on 30 Se Adhesive, Acrylic Base, forAcrylic Plastic FSC 8040 Engine; Rocket, SolidPropellant 5 Second Duration, 4500 Pounds Thrust FSC 2845; Should Be UsedInstead of MIL-E-8581A(AS), Which Was Cancelled on 26 May 2000 Silicone Compound NATO CodeNumber S-736 FSC 6850; Should Be Used Instead of MIL-S-8660C, Which WasCancelled on 30 September 1999 Knife, Hunting, Sheathed,Survival, Pilot's FSC 7340; Should Be Used Instead of MIL-K-8662E(1), WhichWas Cancelled on 30 August 1999 Installation and Test ofElectronic Equipment in Aircraft, General Specification for FSC MISC; ShouldBe Used Instead of MIL-I-8700, Which Was Cancelled on August 23, Valve; Air Relief, LowPressure Hydraulic System Components,Aircraft and Missiles, General Specification for Should Be Used Instead ofMIL-H-8775D, which Was Cancelled on 28 September, 1998 Retainer, Packing, Hydraulicand Pneumatic, Tetrafluoroethylene Resin Reretainer, Packing, Hydraulicand Pneumatic, Polytetrafluoroethylene, Single Turn Hose, Air Duct, Flexible,Aircraft Sealing Compound, TemperatureResistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion Deicing System, PneumaticBoot, Aircraft, General Specification for Coating, Cadmium (VacuumDeposited) AREA MFFP; Should Be Used Instead of MIL-C-8837B, Which WasCancelled on 10 September 1999 Fittings and Cargo Rings,Tie-Down, Aircraft Floor FSC 1670; Should Be Used Instead of MIL-F8905B(1),Which Was Cancelled on 07 September 1999 Bearing, Roller,Self-Aligning, Airframe, Antifriction FSC 3110; Should Be Used Instead ofMIL-B-8914B(3), Which Was Cancelled on 30 August 1999 Steel Bars, Plates, Sheets,Billets, and Reforging Stock Type D6AC Steel Sheet and Strip,Corrosion-Resistant, Precipitation Hardening (AM350 and AM355), PremiumQuality FSC 9515; Should Be Used Instead of MIL-S- 8840B, Which Was Can Bearings, Roller, Rod End,Antifriction Self-Aligning FSC 3110; Should Be Used Instead of MIL-B8952B,Which Was Cancelled on 30 August 1999 Beryllium Sheet and PlateGeneral Requirements for FSC 9535; Should Be Used Instead of MIL-B8964(ASG),Which Was Cancelled on 17 September 1999 Bearings, Plain,Self-Aligning, All Metal FSC 3120; Should Be Used Instead of MIL-B-8976(4),Which Was Cancelled on 30 August 1999 Gasket, Fuselage Light - CoverScrew FSC 5330 Titanium and Titanium Alloy,Sheet, Strip, and Plate FSC 9535

Ring - Back-Up, BossConnection, AMS 3652, AMS 3656, AMS 3660, AMS 3667 FSC 5330 Cloth, Glass, Finished, forResin Laminates FSC 8305; Should Be Used Instead of MIL-C-9084C, Which WasCancelled on 10 September 1999 Pin, Straight, Headless,AMS5688, Lock FSC 5315 (R) Bolt, Machine - DoubleHexagon Extended Washer Head, Close Tolerance Shank, UNS S66286, 130 KSI,.3125-24 UNJF-3A FSC 5306 Gasket - Metal O-Ring, .035 TubeX .006 Wall, Cres FSC 5330 Gasket - Metal O-Ring, .062Tube X .006 Wall, Cres FSC 5330 Gasket - Type XX EngineAccessory Drive FSC 5330 Bolt-Machine, Steel, 12 PointHead, .250-28, Black Oxide FSC 5306 Nut, Plain, Hex, BossConnection, Corrosion Resistant Steel FSC 5310 Gasket - Metal O-Ring, .062Tube X .010 Wall, Cres FSC 5330 Gasket - Metal O-Ring, .094Tube X .006 Wall, Cres FSC 5330 Gasket - Metal O-Ring, .094Tube x .010 Wall, CRES FSC 5330 Gasket - Metal O-Ring, .125Tube x .010 Wall, CRES FSC 5330 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer Head,.190-32 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer Head,.250-28 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer Head,.3125-24 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Double Hexagon Extended Washer Head,.4375-20 UNJF-3A FSC 5306 Screw, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plate, Double Hexagon Extended Washer Head,Drilled, .164-36 UNJF-3A FSC 5305 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plate, Double Hexagon Extended Washer Head,Drilled, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Steel, AMS 6304,Diffused Nickel- Cadmium Plate, Double Hexagon Extended Washer Head, . 250-28UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6304, Diffused Nickel - Cadmium Plate, Double Hexagon Extended Washer Head,.3125-24 UNJF-3A FSC 5306 Bracket, Angle, 90 Degree .190x .312 Bolt FSC 5340; Should Be Used for New Design Instead of MS9230C, WhichWas Cancelled on September 28, 1998 Pin, Cotter - CRES, AMS 7211FSC 2615 Washer, Key - Cres, AMS 5510,180 Deg. Locking FSC 5310 Bolt, Machine-Steel AMS 6322,Black Oxide, Hexagon Head, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Steel, AMS6322, Black Oxide, Hexagon Head, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6322, Black Oxide, Hexagon Head, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Steel, AMS6322, Black Oxide, Hexagon Head, .375-24 UNJF-3A FSC 5306 Screw, Machine - Steel AMS6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .138-40 UNJF-3A FSC 5305 Bolt, Machine - Steel AMS6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .190-32 UNJF-3A FSC 5306

Bolt, Machine-Steel AMS 6322,Black Oxide, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Steel, AMS6322, Black Oxide, Drilled, 1 Hole, Hexagon Head, .375-24 UNJF-3A FSC 5306 Stud, Shouldered, HexagonWrenching Steel, .190-32 NF- 3A X .190-32 NF-3A FSC 5307 Stud, Shouldered and Stepped,Hexagon Wrenching Steel, .190-32 NF-3A X .250-28 UNF-3A FSC 5307 Stud, Shouldered, HexagonWrenching Steel, .250-28 UNF- 3A X .250-28 UNF-3A FSC 5307 Stud, Shouldered and Stepped,Hexagon Wrenching, Steel, .250-28 UNF-3A X .3125-24 UNF-3A FSC 5307 Stud, Shouldered and Stepped,Hexagon Wrenching Steel, .250-28 UNF-3A X .375-24 UNF-3A FSC 5307 Stud, Shouldered, HexagonWrenching, Drilled, Steel, .190-32 NF-3A X .190-32 NF-3A FSC 5307 Stud, Shouldered and Stepped,Hexagon Wrenching, Drilled, Steel, .190-32 UNF-3A X .250-28 UNF-3A FSC 5307 Stud, Shouldered, HexagonWrenching, Drilled, Steel, .250-28 UNF-3A X .250-28 UNF-3A FSC 5307 Stud, Shouldered and Stepped,Hexagon Wrenching, Drilled, Steel, .250-28 UNF-3A X .3125-24 UNF-3A FSC 5307 Stud, Shouldered and Stepped,Hexagon Wrenching, Drilled, Steel, .250-28 UNF-3A X .375-24 UNF-3A FSC 5307 Screw, Machine - Steel,Slotted Hexagon Head, .190-32, Ni-Cad Plate FSC 5305 Screw, Machine - Steel,Slotted Hexagon Head, .250-28 Ni-Cad Plate FSC 5305 Rivet, Solid - 100 DegreeFlush Head, AMS 7233 FSC 5320 Rivet, Solid - Universal Head,AMS 7233 FSC 5320 Washer, Flat - AMS 6350 FSC5310 Washer, Flat - AMS 5510 FSC5310 Clamp, Loop - Aluminum, .204Hole FSC 5340 Clamp, Loop - Aluminum, .265Hole FSC 5340 Nut, Plain, Hexagon-A-286,Silver Plated FSC 5310 Nut, Castellated,Hexagon-A-286 FSC 5310 Nut, Castellated, Hexagon -A-286, Silver Plated FSC 5310 Nut, Plain, Hex-Drilled -A-286, Silver Plated FSC 5310 Nut, Plain, Hexagon,Check-A-286 FSC 5310 Nut, Plain, Hexagon, Check -A-286, Silver Plated, MIL- S-8879 FSC 5310 Nut, Slotted, Hexagon-Shear,A-286 FSC 5310 Nut, Slotted, Hexagon - Shear,A-286 Silver Plated, MIL-S-8879 FSC 5310 Gasket-Metal O-Ring, .035 TubeX .006 Wall, Silver Plated FSC 5330 Gasket-Metal O-Ring, .062 TubeX .006 Wall, Silver Plated FSC 5330 Gasket - Metal O-Ring, .062Tube x .010 Wall Silver Plated FSC 5330 Gasket - Metal O-Ring, .094Tube X .006 Wall, Silver Plated FSC 5330 Gasket-Metal O-Ring, .094 TubeX .010 Wall, Silver Plated FSC 5330 Gasket-Metal O-Ring, .125 TubeX .010 Wall, Silver Plated FSC 5330 Plug, Expansion - AMS 5510 FSC5340 Plug, Expansion - AMS 4003 FSC5340 Packing, Preformed, AMS 7267,O-Ring FSC 5330

Packing, Preformed, AMS 7267,O-Ring FSC 5330 Pin, Straight, Headless - AMS5735, Lock FSC 5315 Pin, Straight, Headless -CRES, AMS 5735, Dowel Standard and Oversize FSC 5315 Clamp, Loop - Multiple Tube,Detachable Cushion, AMS 5510 FSC 5340 Cushion, Loop Clamp -Multiple, 3-Tube, AMS 3303 FSC 5340 Cushion, Loop Clamp - Multiple,2-Tube, AMS 3303 FSC 5340 Strap, Retaining-MultipleTube, Detachable Cushion, AMS 5510 FSC 5340 Backplate, Retaining Strap AMS5510 FSC 5340 Bolt, Tee Head - AMS 6322,Chamfered, .190-32 UNJF-3A, Cadmium Plate (ASG) FSC 5306 Bolt, Tee Head - AMS 6322,Chamfered, .250-28 UNJF-3A, Cadmium Plate (ASG) FSC 5306 Rivet, Solid - Universal Head,AMS 5737 FSC 5320 Bolt, Tee Head - AMS 5735,Chamfered, .190-32 UNJF-3A FSC 5306 Bolt, Tee Head - AMS 5735,Chamfered, .250-28 UNJF-3A FSC 5306 Bolt, Tee Head - AMS 5735,Chamfered, .3125-24 UNJF-3A FSC 5306 Bolt, Machine-Steel AMS 6304,Diffused Nickel-Cadmium Plated, Hexagon Head, Drilled, .190-32 UNJF-3A FSC5306 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Hexagon Head, Drilled, .250-28 UNJF3AFSC 5306 Bolt, Machine - Steel AMS6304, Diffused Nickel- Cadmium Plated, Hexagon Head, Drilled, .3125-24 UNJF3A (ASG) FSC 5306 Screw, Machine, Hexagon Head,Steel, .138-40 UNJF-3A FSC 5305 Screw Machine Hexagon HeadSteel 164-36 UNJF-3A FSC 5305 Bolt, Machine, Hexagon Head,Steel, .190-32 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, .250-28 UNJF-3A FSC 5306 Bolt, Machine, Hexagon HeadSteel, .3125-24 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, .375-24 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, .4375-20 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, .500-20 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, 5625-18 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, .5625-18 UNJF-3A FSC 5306 Bolt, Machine-Steel, AMS 6304,Diffused Nickel-Cadmium Plated Hexagon Head, .750-16 UNJF-3A FSC 5306 Rivet, Solid - 100 DegreeFlush Head, AMS 7235 FSC 5320 Pin, Straight, Heated, .124Diameter AMS 5735 FSC 5315 Pin, Straight, Headed, .186Diameter, AMS 5735 FSC 5315 Pin, Straight, Headed, .248Diameter, AMS 5735 FSC 5315 Pin, Straight, Headed, .311Diameter, AMS 5735 FSC 5315 Pin, Straight, Headed, .373 Diameter,AMS 5735 FSC 5315 Pin, Straight, Headed, .436Diameter, AMS 5735 FSC 5315 Pin, Straight, Headed .497Diameter, AMS 5735 FSC 5315 Washer, Flat - Steel AMS 6437or AMS 6485, Diffused Nickel-Gradium Plated, Countersunk FSC 5310 Pin, Straight, Headless - AMS5132, Lock FSC 5315 Bolt, Machine - Hexagon Head,Full Shank AMS 5731, .190-32 UNJF-3A FSC 5306

Bolt, Machine - Hexagon Head,Full Shank AMS 5731, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank AMS 5731, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .375-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .4375-20 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .500-20 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5731, .625-18 UNJF-3A FSC 5306 Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .190-32 UNJF-3A FSC 5306 Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .250-28 UNJF-3A FSC 5306 Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .3125-24 UNJF-3A FSC 5306 Bolt, Machined - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .375-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5731, .500-20 UNJF-3A FSC 5306 Screw, Machine Steel AMS 6322,Cadmium Plate, Hexagon Head, .138-40 UNJF-3A FSC 5305 Screw, Machine Steel AMS 6322,Cadmium Plate, Hexagon Head, .164-36 UNJF-3A FSC 5305 Bolt, Machine, Hexagon HeadSteel, Cadmium Plated, .190-32 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .250-28 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated .3125-24 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .375-24 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .4375-20 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .500-20 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .5625-18 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .625-18 UNJF-3A FSC 5306 Bolt, Machine, Hexagon Head,Steel, Cadmium Plated, .750-16 UNJF-3A FSC 5306 Screw, Machine Steel AMS 6322,Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .138-40 UNJF-3A FSC 5305 Screw, Machine Steel AMS 6322,Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .164-36 UNJF-3A FSC 5305 Bolt, Machine - Steel AMS 6322,Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .375-24 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .4375-20 UNJF-3A FSC 5306 Bolt, Machine - Steel AMS6322, Cadmium Plate, Drilled, 1 Hole, Hexagon Head, .500-20 UNJF-3A FSC 5306 Washer, Flat - AMS 5510 FSC5310 Bracket, Flat, Steel, AMS6350, Cad, Plate FSC 5340 Plate, Mending FSC 5340 Nut-Hex, Boss Connection, CRESFSC 5310 Screw, Machine - DoubleHexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .138-40UNJF3A FSC 5305

Screw, Machine - DoubleHexagon Extended Washer Head, Corrosion and Heat Resistant Steel, .164-36UNJF3A FSC 5305 Bolt, Machine-Double Hexagon,Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32 UNJF-3A FSC5306 Bolt, Machine - Double HexagonExtended Washer Head, Corrosion and Heat Resistant Steel, .250-28 UNJF3A FSC5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .3125-24UNJF3A FSC 5306 Bolt, Machine-Double Hexagon,Extended Washer Head, Corrosion and Heat Resistant Steel, .375-24 UNJF-3A FSC5306 Screw, Machine - DoubleHexagon Extended Washer Head, Drilled, AMS 5731, .164-36 UNJF-3A FSC 5305 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS5731, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, .375-24 UNJF-3A FSC 5306 Screw, Machine - DoubleHexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, .138-40UNJF-3A FSC 5305 Screw, Machine - DoubleHexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, .164-36UNJF-3A FSC 5305 Bolt, Machine-Double Hexagon,Extended Washer Head, Drilled, PD Shank, Silver Plated, .190-32 UNJF-3A FSC5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Silver Plated, .250-28 UNJF-3A FSC5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Silver Plated, .3125-24 UNJF-3A FSC5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Silver Plated, .375-24 UNJF-3A FSC5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, AMS 5731, Silver Plated, .50020UNFJ-3A FSC 5306 Washer, Key-CRES, AMS 5510, 90Degree, Locking FSC 5310 Washer, key - CRES, AMS 5510,270 Deg. Locking FSC 5310 Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .190-32 UNJF-3A FSC 5306 Bolt, Machine-Hexagon Head,Drilled, 6 Holes, Full Shank, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .375-24 UNJF-3A FSC 5306 Bolt, machine _ Hexagon Head,Drilled 6 Holes, Full Shank, .4375-20 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .500-20 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 6 Holes, Full Shank, .5625-18 UNJF-3A FSC 5306 Bracket, Angle, 90 Degree,Cres .190 Bolt FSC 5340

Bracket, Angle, 90 Degree,Cres AMS 5510, .190 X .250 Bolt FSC 5340 Bracket, Angle 90 Degree,Cres, .190 X .312 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cres .190 X .375 Bolt FSC 5340 Bracket, Angle, 90 Degree,Steel .190 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cadmium Plated .190 X .250 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cadmium Plated .190 X .312 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cadmium Plated .190 X .375 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cres .190 X .250 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cres .190 x .312 Bolt FSC 5340 Bracket, Angle, 90 Degree,Cres .190 x .375 Bolt FSC 5340 Screw, Machine - Hexagon Head,PD Shank, Titanium AMS 4967, .138-40 UNJF-3A FSC 5305 Bolt, Machine - Hexagon Head,PD Shank, Titanium AMS 4967, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,PD Shank, Titanium AMS 4967, .500-20 UNJF-3A FSC 5306 Bolt, Machine - CRES AMS 5731,Double Hexagon Extended Washer Head, Cupwasher Locked, .190-32 UNJF-3A FSC5306 Bolt, Machine - CRES AMS 5731,Double Hexagon Extended Washer Head, Cupwasher Locked, .250-28 UNJF-3A FSC5306 Bolt, Machine - Cres, AMS5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Cres, AMS5731, Double Hexagon, Extended Washer Head, Cup Washer Locked, .375-24 UNJF-3A FSC 5306 Bolt, Machine - Steel, AMS6322, Cadmium Plated, Double Hexagon, Extended Washer Head, Cup WasherLocked, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate,.190-32 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate,.250-28 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, Steel AMS 6304, Diffused Nickel Cadmium Plate,.3125-24 UNJF-3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .190-32UNJF3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .250-28 UNJF3AFSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .3125-24UNJF3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Corrosion and Heat Resistant Steel, .375-24UNJF3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel,.190-32 UNJF-3A FSC 5306 Screw, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion & HeatResistant Steel, .138-40 UNJF-3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and HeatResistant Steel, .190-32 UNJF-3A FSC 5306

Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and HeatResistant Steel, .250-28 UNJF-3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, Silver Plated, Corrosion and HeatResistant Steel, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Close Tolerance Shank, Corrosion and Heat ResistantSteel, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Cres AMS 5643, .190-32 UNJF-3A FSC 5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, PD Shank, CRES AMS 5643, .250-28 UNJF-3A FSC5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, PD Shank, CRES AMS 5643, .3125-24 UNJF-3A FSC5306 Bolt, Machine - DoubleHexagon, Extended Washer Head, Drilled, PD Shank, CRES AMS 5643, .190-32UNJF3A FSC 5306 Bolt, Machine-Double HexagonExtended Washer Head, Drilled, PD Shank, CRES AMS 5643, .250-28 UNJF3A FSC5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Titanium AMS 4967, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Titanium AMS 4967, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head Drilled, PD Shank, Titanium AMS 4967, .190-32 UNJF-3AFSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .250-28 UNJF-3AFSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Titanium AMS 4967, .3125-24 UNJF-3AFSC 5306 Packing, Preformed - AMS 3650,'O' Ring FSC 5330 Packing, Preformed - AMS 3650,Seal FSC 5330 Packing, Preformed - AMS 3617,"O" Ring FSC 5330 Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .250-28 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .375-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .500-20 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Full Shank, AMS 5643, .625-18 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, Full Shank, AMS 5643, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,PD Shank, AMS 5643, .190- 32 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,PD Shank, AMS 5643, .250- 28 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,PD Shank, AMS 5643, .375- 24 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, AMS 5643, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Hexagon Head,Drilled, 1 Hole, PD Shank, AMS 5643, .500-20 UNJF-3A FSC 5306 Key, Woodruff - Chamfered CRESAMS 5640 FSC 5315 Pin, Straight, Headed, .0937Diameter, AMS 5616 FSC 5315 Pin, Straight, Headed, .1249Diameter, AMS 5616 FSC 5315

Pin, Straight, Headed, .1874Diameter, AMS 5616 FSC 5315 Pin, Straight, Headed, .2499Diameter, AMS 5616 FSC 5315 Pin, Straight, Headed, .3124Diameter, AMS 5616 FSC 5315 Pin, Straight, Headed, .3749Diameter, AMS 5616 FSC 5315 Pin, Straight, Headed, .4999Diameter, AMS 5616 FSC 5315 Washer, Cup, Lock - CRES AMS5510 FSC 5310 Nut, Plain Hexagon - AMS 6322,Cadmium Plate MIL-S- 8879 FSC 5310 Nut, Plain, Hex-Drilled - AMS6322, Cadmium Plated, MIL-S-8879 FSC 5310 Bolt, Machine - Double HexagonExtended Washer Head, AMS 5616, .190-32 UNJF-3A FSC 5306 Bolt, Machine-Double HexagonExtended Washer Head, AMS 5616, .3125-24 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, AMS 5616, .500-20 UNJF-3A FSC 5306 Bolt, Machine-Double HexagonExtended Washer Head, Drilled, AMS 5616, .190-32 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, AMS 5616, .250-28 UNJF-3A FSC 5306 Plug, Machine Thread Drilled,Preformed Packing MIL-S- 8879 Thread FSC 5365 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .19032 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .312524UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .37524 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .437520UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .19032 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, PD Shank, Steel AMS 6322, Cadmium Plated, .25028 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, PD Shank, Steel AMS 6322, Cadmium Plated,.500-20 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, . 0250-28UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Drilled, Full Shank, Steel AMS 6322, Cadmium Plated,.375-24 UNJF-3A FSC 5306 Bolt, Machine - Double HexagonExtended Washer Head, Full Shank, Steel AMS 6322, Cadmium Plated, . 5625-18UNJF-3A FSC 5306 Packing, Preformed - AMS 3668,"O" Ring FSC 5330 Packing, Preformed - AMS 3668,Seal FSC 5330 Bolt, Machine, Hexagon Head,Drilled, 6 Hole, PD Shank, Steel AMS 6322, Cadmium Plated, .250-28 UNJF3AFSC 5306 Bolt, Machine, Hexagon Head,Drilled, 6 Hole, PD Shank, Steel AMS 6322, Cadmium Plated, .625-18 UNJF3AFSC 5306 Packing, Preformed - AMS 7273,Seal FSC 5330 Packing, Preformed - AMS 7273,"O" Ring FSC 5330

Hubs, Conduit Connection,Standard Dimensions FSC 5975 Terminal Shank-Swaging,Dimensions for FSC 4030; Should Be Used Instead of AND10081(4), Which WasCancelled on 07 September 1999 Coupling Installations,Standard Conduit, Electrical FSC 5975 Shot Peening of Metal Parts Process for Barrier Coating ofAnti-Friction Bearings FSC 3110; Should Be Used Instead of MIL-STD1334B(1),Which Was Cancelled on 2 August 1999 Navigation, Display MulticolorMicrochart/Map Transparencies FSC 6605; Should Be Used Instead of MILSTD-1347, Which Was Cancelled on 30 August 1999 Cleaning Methods andProcedures for Breathing Oxygen Equipment FSC 1660; Should Be Used Instead ofMIL-STD- 1359B, Which Was Cancelled on 20 September 1999 Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Narrow, Grooved Outer Ring, -65Degrees to 325 Degrees F FSC 3120 Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Wide, Chamfered Outer Ring, -65Degrees F To 325 Degrees F Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Wide, Grooved Outer Ring, -65Degree F to 325 Degree F FSC 3120 Bearing, Plain,Self-Lubricating, Self-Aligning, Low Speed, Narrow, Chamfered Outer Ring, -65Degrees F to 325 Degrees F Circuit Breaker - Aircraft,Trip-Free, Push Pull, 25 Thru 35 Amps, Type I -55 to +121 Degrees C Gyroscope, Displacement, Rolland Pitch (Hard Mounted) FSC 6610; Should Be Used Instead of MS14114(AS),Which Was Cancelled on 09 August 1999 Circuit Breaker - Aircraft,Trip-Free, Push-Pull 3 Phase, 1 Thru 35 Amp, Type 1 Circuit Breaker - Aircraft,Trip-Free, Push-Pull, 3 Phase, 1 Thru 20 Amp, Type 1 FSC 5925 Lock, Rod End, ImprovedStrength, NAS Lug FSC 5340 Bushing, Sleeve Plain, PressFit, Ream Type Bushing, Sleeve Flanged, PressFit, Ream Type FSC 3120 Clamp, Loop, Nylon, Metric FSC5340; Should Be Used Instead of DS14243, Which Was Cancelled on 27 September1999 Clamp, Loop Type, Bonding,Metric FSC 5340; Should Be Used Instead of DS14244, Which Was Cancelled on 27September 1999 Pin, Quick Release, PositiveLocking, "L" Handle, Single Action, Detent Wrench/Safety Pin(Slotted) FSC 5340 Clamp, Loop, Plastic, WireSupport, Metric FSC 5340; Should Be Used Instead of DS14487, Which WasCancelled on 29 October 1999 Clamp, Loop, Plastic, WireSupport, Ribbed Inner Diameter, Metric FSC 5340; Should Be Used Instead ofDS14488, Which Was Cancelled on 27 September 1999 Bearing, Ball, Annular,Primarily for Aircraft Motor- Generators, Type I FSC 3110 Terminal, Lug, Crimp Style,Copper, Insulated, Rectangular Tongue, Type II, Class 1 for 105 Degrees CTotal Conductor Temperature

Screw, Externally RelievedBody (Synchro) Reducers, Oxygen Pressure FSC1660; Should Be Used Instead of MIL-R-17852(AS), Which Was Cancelled on 28July 1999 Compass, Magnetic, Pilot'sStandby FSC 6605; Should Be Used Instead of MS17983, Which Was Cancelled on30 August 1999 Markings for Aircrew StationDisplays Design and Configuration of FSC 1500; Should Be Used Instead ofMILM-18012B(3), Which Was Cancelled on 02 September 1998 Indicator, Humidity, Plug,Color Change FSC 6685; Should Be Used Instead of MS18013A(AS), Which WasCancelled on 30 August 1999 Ferrules, Outer, Insulated,Shield Terminating, Type II Two-Piece, Class I, for Shielded Cable FSC 5940;Should Be Used Instead of MS18121G, Which Was Cancelled on 27 Installation of WindowAnti-Icing, De-Greasing, and Washing Systems (General Specification for) Lighting, Aircraft Interior,Installation of FSC 6220 (R) Fittings, 24 degrees ConeFlareless, Fluid Connection, 3000 psi Sleeve, Bite Type, 24 DegreesCone Flareless Fitting, 3000 psi Lead Alloy Pig FSC 9650;Should Be Used Instead of MIL- L-18331B(AS), Which Was Cancelled on 10September 1999 Thermal Anti-Icing Equipment,Wing and Empennage Pumps, Hydraulic, VariableFlow, General Specification for Carbon Removing Compound (forUse in Agitated Tank) FSC 6850; Should Be Used Instead of MIL-C19853D, WhichWas Cancelled on 21 September 1998 Brazing Sheet, Aluminum AlloyShould Be Used Instead of MIL-B-20148D, Which Was Cancelled on 21 September1998 Bearing, Ball, Anti-Friction,Airframe FSC 3110; Should Be Used Instead of MS20218C, Which Was Cancelled on24 August 1998 Pin, Hinge FSC 5315 Synchros, GeneralSpecification for FSC 5990; Should Be Used Instead of MIL-S-20708, Which WasCancelled on 15 September 1999 Synchro, Control Transformer,Type 11CT4E FSC 5990; Should Be Used Instead of MIL-S-20708/1F, Which WasCancelled on 15 September 1999 Synchro, Control Transmitter,Type 11CX4E FSC 5990; Should Be Used Instead of MIL-S-20708/2E, Which WasCancelled on 15 September 1999 Synchro, Torque Receiver, Type11TR4C FSC 5990; Should Be Used Instead of MIL-S-20708/3E, Which WasCancelled on 15 September 1999 Synchro, Torque Receiver, Type11TX4C FSC 5990; Should Be Used Instead of MIL-S-20708/4E Synchro, Torque Receiver, Type26V-11TR4C FSC 5990; Should Be Used Instead of MIL-S-20708/5E, Which WasCancelled on 15 September 1999 Synchro, Torque Transmitter,Type 26V-11TX4C FSC 5990; Should Be Used Instead of MIL-S-20708/6F, Which WasCancelled on 15 September 1999

Synchro, Control Transformer,Type 26V-11CT4D FSC 5990; Should Be Used Instead of MIL-S-20708/7E, Which WasCancelled on 15 September 1999 Synchro, Control Transmitter,Type 26V-11CX4C FSC 5990; Should Be Used Instead of MIL-S-20708/8E, Which WasCancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 26V- 11CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/9E, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 15CX4D FSC 5990; Should Be Used Instead of MIL-S-20708/14G, Which WasCancelled on 15 September 1999 Synchro, Control Transformer,Type 15CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/15G, Which WasCancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 15CDX4D FSC 5990; Should Be Used Instead of MIL-S20708/16F, Which Was Cancelled on 15 September 1999 Synchro, Torque DifferentialTransmitter, Type 15TDX4C FSC 5990; Should Be Used Instead ofMIL-S20708/17F, Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 15TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/19G, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 15CX6C FSC 5990; Should Be Used Instead of MIL-S-20708/20E, Which WasCancelled on 15 September 1999 Synchro, Control Transformer,Type 15CT6D FSC 5990; Should Be Used Instead of MIL-S-20708/21F, Which WasCancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 15CDX6C FSC 5990; Should Be Used Instead of MIL-S20708/22E, Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 15TRX6A FSC 5990; Should Be Used Instead ofMIL-S20708/23E, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 18CX4D FSC 5990; Should Be Used Instead of MIL-S-20708/28F, Which WasCancelled on 15 September 1999 Synchro, Control Transformer,Type 18CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/29F, Which WasCancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 18CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/30F, Which Was Cancelled on 15 September 1999 Synchro, Torque DifferentialTransmitter, Type 18TDX4C FSC 5990; Should Be Used Instead ofMIL-S20708/31F, Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 18TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/32G, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 18CX6C FSC 5990; Should Be Used Instead of MIL-S-20708/33E, Which WasCancelled on 15 September 1999 Synchro, Control Transformer,Type 18CT6D FSC 5990; Should Be Used Instead of MIL-S-20708/34E, Which WasCancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 18TRX6B FSC 5990; Should Be Used Instead ofMIL-S20708/35E, Which Was Cancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 18CDX6D FSC 5990; Should Be Used Instead of MIL-S20708/36E, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 23CX4D FSC 5990; Should Be Used Instead of MIL-S-20708/45F, Which WasCancelled on 15 September 1999

Synchro, Control Transformer,Type 23CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/46E, Which WasCancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 23CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/47E, Which Was Cancelled on 15 September 1999 Synchro, Torque DifferentialTransmitter, Type 23TDX4C FSC 5990; Should Be Used Instead ofMIL-S20708/48E, Which Was Cancelled on 15 September 1999 Synchro, DifferentialReceiver, Type 23TDR4B FSC 5990; Should Be Used Instead of MIL-S20708/49C,Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 23TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/50F, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 23CX6D FSC 5990 Synchro, Control Transformer,Type 23CT6D FSC 5990; Should Be Used Instead of MIL-S-20708/53E, Which WasCancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 23CDX6C FSC 5990; Should Be Used Instead of MIL-S20708/54E, Which Was Cancelled on 15 September 1999 Synchro, Torque DifferentialTransmitter, Type 23TDX6C FSC 5990; Should Be Used Instead ofMIL-S20708/55E, Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 23TRX6B FSC 5990; Should Be Used Instead of MIL-S20708/56E,Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 31TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/62F, Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 31TRX6A FSC 5990; Should Be Used Instead ofMIL-S20708/66E, Which Was Cancelled on 15 September 1999 Synchro, Torque DifferentialReceiver, Type 31TDR6B FSC 5990; Should Be Used Instead of MIL-S20708/67C,Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 37TRX4A FSC 5990; Should Be Used Instead ofMIL-S20708/70D, Which Was Cancelled on 15 September 1999 Synchro, Torque ReceiverTransmitter, Type 37TRX6A FSC 5990; Should Be Used Instead ofMIL-S20708/74E, Which Was Cancelled on 15 September 1999 Synchro, Torque DifferentialTransmitter, Type 37TDX6A FSC 5990; Should Be Used Instead ofMIL-S20708/76C, Which Was Cancelled on 15 September 1999 Synchro, Control Transmitter,Type 26V-08CX4C FSC 5990; Should Be Used Instead of MIL-S-20708/78F, WhichWas Cancelled on 15 September 1999 Synchro, Control Transformer,Type 26V-08CT4C FSC 5990; Should Be Used Instead of MIL-S-20708/79F, WhichWas Cancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 26V- 08CDX4C FSC 5990; Should Be Used Instead of MIL-S20708/80F, Which Was Cancelled on 15 September 1999 Synchro, Control DifferentialTransmitter, Type 11CDX4B FSC 5990; Should Be Used Instead of MIL-S20708/81E, Which Was Cancelled in 15 September 1999 Synchro, Control Transmitter,Type 15CX4F FSC 5990; Should Be Used Instead of MIL-S-20708/131D, Which WasCancelled on 15 September 1999 Synchro, Torque Receiver, Type26V-10TR4 FSC 5990; Should Be Used Instead of MIL-S-20708/500A and Notice 1,Which Were Cancelled on 15 September 1999

Tungsten Base Metal, HighDensity Should Be Used Instead of MIL-T-21014D, Which Was Cancelled onOctober 5, 1998 Bearing, Ball, Rod End, DoubleRow, Precision, Solid Shank, Self-Aligning, Airframe, Type I, -65 Degrees to300 Degrees F FSC 3110 Bearing, Ball, Rod End, DoubleRow, Precision, External Thread, Self-Aligning, Airframe, Type II, -65Degrees to 300 Degrees F FSC 3110 Bearing, Ball, Rod End, DoubleRow, Precision, Hollow Shank, Self-Aligning, Airframe, Type III, -65 Degreesto 300 Degrees F FSC 3110 Bearing, Ball, Rod End, DoubleRow, Precision, Internal Thread, Self-Aligning, Airframe, Type IV, -65Degrees to 300 Degrees F FSC 3110 Bearing, Plain, Self-Aligning,Grooved Outer Ring FSC 3120 Bearing, Plain, Self AligningFSC 3120; Should Be Used Instead of MS21155B, Which Was Cancelled on 30August 1999 Aluminum-Alloy Castings, HighStrength AREA MECA; Should Be Used Instead of MIL-A-21180D, Which WasCancelled on 10 September 1999 Bearing, Roller, Rod End,Internal Thread, Self- Aligning, Anti-Friction, Airframe, Heavy Duty, TypeII, -67 Degrees to 350 Degrees F, Sealed FSC 3110; Should Be Used Bearing, Roller, Rod End,External Thread, Self- Aligning, Anti-Friction, Airframe, Heavy Duty, Type I,-67 Degrees to 350 Degrees F, Sealed FSC 3110; Should Be Used Bearing, Roller, Rod End,External Thread, Self- Aligning, Anti-Friction, Airframe, Heavy Duty, Type I,-67 Degrees to 350 Degrees F, Sealed FSC 3110; Should Be Used Bearing, Plain, Self-Aligning,Grooved Outer Ring TFE Lined, Wide FSC 3120; Should Be Used Instead ofMS21230B, Which Was Cancelled on 03 May 1999 Bearing, Plain, Self-Aligning,TFE Lined, Wide FSC 3120; Should Be Used Instead of MS21231B, Which WasCancelled on 03 May 1999 Bearing, Plain, Self-Aligning,Groove Outer Ring, TFE Lined, Narrow FSC 3120; Should Be Used Instead ofMS21232A, Which Was Cancelled on 03 May 1999 Bearing, Plain, Self-Aligning,TFE Lined, Narrow FSC 3120; Should Be Used Instead of MS21233B, Which WasCancelled 03 May 1999 Bearing, Ball, Airframe,Anti-Friction, Extra Light Duty, Precision Bearing, Roller, Self-AligningSingle Row Anti- Friction, Sealed -65 to 350 Degrees F, Type I FSC 3110;Should Be Used Instead of MS21431A, Which Was Cancelled on 05 Bearing, Roller, Needle,Single Row, Heavy Duty, Track Roller, Sealed, Type V Antifriction, Inch FSC3110; Should Be Used Instead of MS21438C, Which Was Cancelled on Bearing, Roller, Needle,Double Row, Heavy Duty, Track Roller, Sealed, Type VI, Inch FSC 3110; ShouldBe Used Instead of MS21439B, Which Was Cancelled on 30 August 19 Bearing, Roller, Needle, TrackRoller, Integral Heavy Stud, Type IX, Antifriction, Inch FSC 3110; Should BeUsed Instead of MS21441B, Which Was Cancelled on 22 Novmeb Bearing, Roller, Needle, TrackRoller, Sealed, Type X, Antifriction, Inch FSC 3110; Should Be Used Insteadof MS21442B, Which Was Cancelled on 24 January 2000 Bearing, Ball, Airframe,Anti-Friction, Pulley Bearing, Roller, Self-AligningSingle Row, Barrel Roller, Torque Tube, Airframe, Antifriction, Sealed Type VFSC 3110; Should Be Used Instead of MS21446A, Which Was C

Bearing, Roller, Needle, TrackRoller Crown Radiused O.D. Integral Stud, Type VII Antifriction, Inch FSC3110; Should Be Used Instead of MS21447A, Which Was Cancelled Tapes, Pressure-SensitiveAdhesive, Masking, Non- Staining - for Aircraft Painting Applications ShouldBe Used Instead of MIL-T-21595D, Which Was Cancelled on 21 Sept Paint System, Fluorescent,Removable, for Aircraft Application Ferrule, Shield Terminating,Crimp Style FSC 5940; Should Be Used Instead of MIL-F-21608E, Which WasCancelled on 7 September 1999 Adapter, Flareless Tube to aFlared Tube FSC 4730 Union, Flareless Tube FSC 4730 Plug, Flareless Tube FSC 4730 Cap, Pressure Seal, FlarelessTube Fitting FSC 4730 Adapter, Straight, Tube toBoss FSC 4730 Reducer, External Thread, FlarelessTube FSC 4730 Clamp, Loop Type, CushionedSupport FSC 5340 Nut, Sleeve Coupling,Flareless FSC 4730; Should Be Used Instead of MS21921, Which Was Cancelled on13 January 2000 Sleeve, Coupling, Flareless FSC4730; Should Be Used Instead of MS21922 Adapter, Flareless Tube,Bulkhead and Universal to Flared Tube FSC 4730 Union, Flareless Tube,Bulkhead and Universal FSC 4730 Elbow, 90 Degree Universal,Flareless Tube, High Profile FSC 4730 Elbow, 90 Degree Universal,Flareless Tube, Low Profile FSC 4730 Fitting End, Bolt ClusterFitting, Double Port, Through, Flareless FSC 4730; Should Be Used Instead ofMS21935C, Which Was Cancelled on 07 September 1999 Nut, Cluster Fitting, RetainerFSC 4730; Should Be Used Instead of MS21937 Bolt, Cluster Fitting, SinglePort Flareless FSC 4730; Should Be Used Instead of MS21938 Bolt, Cluster Fitting, SinglePort, Through, Flareless FSC 4730; Should Be Used Instead of MS21939, WhichWas Cancelled on 14 September 2000 Bolt, Cluster Fitting, DoublePort, Through, Flareless FSC 4730; Should Be Used Instead of MS21941, WhichWas Cancelled on 14 September 2000 Body, Cluster Fitting, OneWay, Flareless FSC 4730; Should Be Used Instead of MS21942 Body, Cluster Fitting, TwoWay, 180 Degree, Flareless FSC 4730; Should Be Used Instead of MS21944, WhichWas Cancelled on 14 September 2000 Body, Cluster Fitting,Three-Way, Flareless FSC 4730; Should Be Used Instead of MS21945 Tapes, Pressure-Sensitive,Adhesive, Preservation and Sealing FSC 7510; Should Be Used Instead of MIL-T22085E, Which Was Cancelled on 10 September 1999

Accelerometer Group, Counting(MS25447 and MS25448) FSC 6610; Should Be Used Instead of MIL-A22145C(AS),Which Was Cancelled on 30 August 1999 Shim Stock, Laminated Shim Stock, Laminated,Aluminum Alloy FSC 9535

Shim Stock, Laminated, BrassFSC 9535

Shim Stock, Laminated, CRESFSC 9515 Shim Stock, Laminated, CarbonSteel FSC 9515 Cleaning Compound, HighPressure Cleaner, Liquid FSC 6850; Should Be Used Instead ofMIL-C-22542B(AS), Which Was Cancelled on 21 September 1998 Cartridges, Grease, 14 Ounce(for Cartridge-Type Grease Gun) FSC 4930; Should Be Used Instead of MIL-C22587B, Which Was Cancelled on 30 August 1999 Aluminum Alloy Forgings, HeatTreated AREA FORG; Should Be Used Instead of MIL-A-22771D, Which WasCancelled on 10 September 1999 Spray Kit, Self PressurizedFSC 4940; Should Be Used Instead of MIL-S-22805, Which Was Cancelled on 30August 1999 Paper, Recording, HeatSensitive FSC 7530; Should Be Used Instead of MIL-P-22968B(AS), Which WasCancelled on 24 August 1999 Gages - Inspection for MS23002Crimping Dies (for Use with MS25036 Insulated Terminals) FSC 5220 Iron-Nickel Alloys for Sealingto Glasses and Ceramics Should Be Used Instead of MIL-I-23011C, Which WasCancelled on October 5, 1998 Insulation Sleeving,Electrical, Heat Shrinkable, General Specification for FSC 5970; Should BeUsed Instead of MIL-DTL-23053E, Which Was Cancelled on 16 September 19 Insulation Sleeving,Electrical, Heat Shrinkable, Crosslinked Chlorinated Polyolefin, Flexible FSC5970; Should Be Used Instead of MIL-DTL-23053/1C, Which Was Cancell Insulation Sleeving,Electrical, Heat Shrinkable, Polyolefin, Dual-Wall, Outer Wall CrosslinkedFSC 5970; Should Be Used Instead of MIL-DTL-23053/4D, Which Was Cancel Straps, Clamps, and MountingHardware, Plastic and Metal for Cable Harness Tying and Support FSC 5975;Should Be Used for New Design Instead of MIL-S-23190, Which Was Tapes, Pressure SensitiveAdhesive, for Masking During Paint Stripping Operations Should Be UsedInstead of MIL-T-23397B, Which Was Cancelled on 21 September 1998 Indicator, Pressure, 11/2-Inch, Integrally Lighted FSC 6620; Should Be Used Instead ofMIL-I-23479B(1), Which Was Cancelled on 16 August 1999 Insulation Sleeving,Electrical, Heat Shrinkable, Polyolefin, Flexible, Crosslinked FSC 5970;Should Be Used Instead of MIL-DTL-23053/5C, Which Was Cancelled on 16 Se Insulation Sleeving, Electrical,Heat Shrinkable, Polyolefin, Semi-Rigid, Crosslinked FSC 5970; Should Be UsedInstead of MIL-DTL-23053/6D, Which Was Cancelled on 16

Insulation Sleeving,Electrical, Heat Shrinkable, Polyethylene Terephthalate, Non-Crosslinked FSC5970; Should Be Used Instead of MIL-DTL-23053/7C, Which Was Cancelle Insulation Sleeving,Electrical, Heat Shrinkable, Polyvinylidene Fluoride, Semi-Rigid, CrosslinkedFSC 5970; Should Be Used Instead of MIL-DTL-23053/8C, Which Was Can Aural Protector, Sound FSC4240; Should Be Used Instead of MIL-A-23899B(AS), Which Was Cancelled on 30August 1999 Fuse Holder, Block-Type, 1-,2-, and 3-Pole, 1- to 30- Ampere, Aircraft FSC 5920; Should Be Used Insteadof MS24000F, Which Was Cancelled on 13 September 1999 Fuse Holder, Block-Type, 1-, 2-,and 3-Pole, 35- to 60- Ampere, Aircraft FSC 5920; Should Be Used Instead ofMS24001F, Which Was Cancelled on 13 September 1999 Insulation Sleeving,Electrical, Heat Shrinkable, Silicone Rubber, Flexible FSC 5970; Should BeUsed Instead of MIL-DTL-23053/10D, Which Was Cancelled on 16 September Insulation Sleeving,Electrical, Heat Shrinkable, Fluorinated Ethylene Propylene, Non-CrosslinkedFSC 5970; Should Be Used Instead of MIL-DTL-23053/11C, Which Was Can Insulation Sleeving,Electrical, Heat Shrinkable, Polytetrafluoroethylene FSC 5970; Should Be UsedInstead of MIL-DTL-23053/12C, Which Was Cancelled on 16 September 1 Insulation Sleeving,Electrical, Heat Shrinkable, Fluoroelastomer, Flexible FSC 5970; Should BeUsed Instead of MIL-DTL-23053/13B, Which Was Cancelled on 16 September Insulation Sleeving,Electrical, Heat Shrinkable, Ethylene-Tetrafluoroethylene Fluoropolymer,Semi-Rigid FSC 5970; Should Be Used Instead of MIL-DTL-23053/14B, Which Insulation Sleeving,Electrical, Heat Shrinkable, Polyolefin, Heavy-Wall, Coated, Flexible, OuterWall Crosslinked FSC 5970; Should Be Used Instead of MIL- DTL-23053/ Insulation Sleeving,Electrical, Heat Shrinkable, Crosslinked, Elastromeric Polyolefin, FlexibleFSC 5970; Should Be Used Instead of MIL-DTL-23053/16B, Which Was Canc Insulation Sleeving,Electrical, Heat Shrinkable, Flame Retarded, Modified Polyolefin, Flexible,Crosslinked FSC 5970; Should Be Used Instead of MIL- DTL-23053/17B, W Insulation Sleeving,Electrical, Heat Shrinkable, Modified Fluoropolymer, Crosslinked FSC 5970;Should Be Used Instead MIL-DTL-23053/18B, Which Was Cancelled on 25 Fe Insulation Sleeving,Electrical, Heat Shrinkable, Polyvinyl Chloride, Flexible Crosslinked andNon- Crosslinked FSC 5970; Should Be Used Instead of MIL-I- 23053/2C, W Straps, Clamps, and MountingHardware, Plastic for Cable Harness Tying and Support Clamp, Loop, Nylon,Adjustable, Wire Support, Type III, Class 1 FSC 5340; Should Be Straps, Clamps, Plastic andMetal, and Mounting Hardware, Plastic for Cable Harness Tying and SupportClamp, Loop, Metal, Cushioned, Adjustable, Wire Support, Type V, Straps, Clamps, and MountingHardware, Plastic and Metal for Cable Harness Tying and Support Strap, Tiedown, Adjustable, Corrosion Resistant Steel Type VI, Class 1 F Coupling Assembly, Hydraulic,Self-Sealing, Quick Disconnect, Flared Fitting to Internal Thread Boss FSC4730; Should Be Used Instead of MS24333 Coupling Assembly, Hydraulic,Self-Sealing, Flareless Fitting to Internal Thread Boss FSC 4730; Should BeUsed Instead of MS24334 Adapter, Flareless Tube toFlared Tube Precision Type FSC 4730; Should Be Used Instead of MS24405, WhichWas Cancelled on 1 August 1999 Bearing, Roller, Needle-SingleRow, Heavy Duty, Self- Aligning, Type III, Antifriction, Inch FSC 3110

Bearing, Roller, Needle-DoubleRow, Heavy Duty, Self- Aligning, Type IV, Antifriction, Inch FSC 3110 Circuit Breaker - Aircraft,Trip-Free, Toggle, 5 Thru 15 AMP, Type I FSC 5925; Should Be Used Instead ofMS24509K, Which Was Cancelled on 13 September 1999 Circuit Breaker - Aircraft,Trip-Free, Push-Pull, 5 Thru 15 AMP, Type I FSC 5925; Should Be Used Insteadof MS24510K, Which Was Cancelled on 13 September 1999 Coupling Flangers, V-Band,Profile Dimensions for FSC 5340 Fixant, Hold Down FSC 4210;Should Be Used Instead of DOD-F-24610, Which Was Cancelled on 30 September1999 Elbow, Tube - 90 Degree,Bulkhead, Flareless Tube Universal to Flared Tube FSC 4730; Should Be UsedInstead of MS24651, Which Was Cancelled on 2 August 1999 Elbow, Tube - 90 Degree,Bulkhead, Flared Tube, Universal to Flareless Tube FSC 4730; Should Be UsedInstead of MS24652, Which Was Cancelled on 2 August 1999 Elbow, Tube - 45 Degree,Bulkhead, Flareless Tube Universal to Flared Tube FSC 4730; Should Be UsedInstead of MS24654, Which Was Cancelled on 1 August 1999 Cable Assembly, ExternalElectric Power, Aircraft, 28 Volt DC, Jet Starting FSC 6150; Should Be UsedInstead of MS25019G, Which Was Cancelled on 7 September 1999 Light Assembly, Cockpit, FixedFSC 6220; Should Be Used Instead of MS25027, Which Was Cancelled on 13September 1999 Terminal, Lug, Crimp Style,Copper, Insulated, Ring Tongue, Bell-Mouthed, Type II, Class 1, (for 105Degrees C Total Conductor Temperature) FSC 5940 Colors, Aeronautical Lightsand Lighting Equipment, General Requirements for FSC 6220; Should Be UsedInstead of MIL-C-25050A(2), Which Was Cancelled on 13 September Conduit, Flexible, RadioFrequency Shielding FSC 5975 Engines, Aircraft,Reciprocating, General Specification for FSC 2810; Should Be Used Instead ofMIL-E25109(AS), Which Was Cancelled on 07 September 1999 Link, Terminal, Connecting FSC5940; Should Be Used Instead of MS25226, which Was Cancelled on 31 August,1998 Clamp, Loop, Plastic, WireSupport FSC 5340; Should Be Used Instead of MS25281, Which Was Cancelled on29 October 1999 Adhesive, Film Form, MetallicStructural Sandwich Construction FSC 8040 Cable Assemblies, ElectricPower, for Portable Ground Support Test Equipment Glass, Monolithic, AircraftGlazing FSC 9340 Glass, Laminated, Aircraft GlazingFSC 9340; Should Be Used Instead of MIL-G-25871, Which Was Cancelled on 28September 1999 Seal, Plain, Rubber, (-65 to +160 Degrees F Fuel Resistant), Mold in Groove FSC 5330 Seal, Plain, Rubber, SyntheticOil Resistant, (-65 to + 275 Degree F), Mold in Groove FSC 5330 Gasket, Rubber, FluidResistant, Oils, Synthetic Oils and Fuels, (-65 to + 400 Degrees F), Mold inGroove FSC 5330 Seal, Plain, Rubber, (Hot AirResistant 400 Degree F), Mold in Groove FSC 5330 Seal, Plain, Rubber, (-65 to +350 Degrees F Fuel Resistant), Mold in Groove FSC 5330 Terminal Board Assembly,Molded-In-Stud, Electric FSC 5940; Should Be Used Instead of MS27212, whichWas Cancelled on 31 August, 1998

Bearing, Ball, Airframe,Anti-Friction, Heavy Duty Bearing, Ball, Airframe,Anti-Friction, Intermediate Duty Bearing, Ball, Airframe, ExtraLight Duty Should Be Used Instead of MS27642G, Which Was Cancelled on 23 July1998 Bearing, Ball, Airframe,Anti-Friction, Self-Aligning, Double Row, Heavy Duty Bearing, Ball, Airframe,Anti-Friction, Double Row, Heavy Duty Bearing, Ball, Airframe,Anti-Friction, Self-Aligning, Light and Heavy Duty FSC 3110; Should Be UsedInstead of MS27645E, Which Was Cancelled on 23 July 1998 Bearing, Ball, Airframe,Anti-Friction, Extra Light Duty Bearing, Ball, Airframe,Anti-Friction, Extra Wide, Double Row, Intermediate Duty FSC 3110; Should BeUsed Instead of MS27467F, Which Was Cancelled on 23 July 1998 Bearing, Ball, Airframe,Anti-Friction, External Self Aligning, Extra Light Duty Bearing, Ball, Airframe, Antifriction,Intermediate Duty Coating, CorrosionPreventative, Polyurethane for Aircraft Integral Fuel Tanks for Use to 250Degrees F (121 Degrees C) FSC 8030 Packing, Preformed, ("DRing, Shock Strut) FSC 5330 Packing, Preformed, StraightThread Tube Fitting Boss FSC 5331 Bearing, Roller,Self-Aligning, Single Row Airframe, Anti-Friction, Sealed, Type I FSC 3110;Should Be Used Instead of MS28912E, Which Was Cancelled on 02 September 1 Bearing, Roller,Self-Aligning, Double Row Airframe, Anti-Friction, Sealed, Type II FSC 3110;Should Be Used Instead of MS28913D, Which Was Cancelled on 02 September Bearing, Roller,Self-Aligning, Double Row Airframe, Anti-Friction, Sealed, Type III FSC 3110;Should Be Used Instead of MS28914D, Which Was Cancelled on 02 September Bearing, Roller,Self-Aligning, Double Row Torque Tube, Airframe, Anti-Friction, Sealed, TypeIV FSC 3110; Should Be Used Instead of MS28915D, Which Was Concelled on Packing, Preformed, HydocarbonFuel Resistant, Tube Fittings, "O" Ring FSC 5331 Packing, Preformed, HydocarbonFuel Resistant, "O" Ring FSC 5331 Hook, Filler Cap Chain FSC4030 Packing, Preformed,"O" Ring, Synthetic Lubricant Resistant FSC 5331 Cleaning Compounds, for PartsWashers and Spray Cabinets FSC 6850 Boots, Heat-Shrinkable,Strain-Relief, Straight FSC 5970 Boots, Heat-Shrinkable,Strain-Relief, Right Angle FSC 5970 Connector, Plug, Electric,Solder Type, Push-Pull Coupling Series 1 (Class E, P and J) FSC 5935

Gage Pin for Socket ContactEngagement Test Circuit Breaker-Aircraft,Trip-Free, Push Pull, 1/2 Thru 20 Amps, Type I -55 Thru +121 Degrees C FSC5925; Should Be Used Instead of MS3320N, Which Was Cancelled on 3 Contact Bushing, Electric,Wire Barrel FSC 5935; Should Be Used Instead of MS3348, Which Was Inactivatedfor New Design on January 22, 1999 Fitting End, StandardDimensions for Flareless Tube Connection and Gasket Seal FSC 4730 Fitting End, StandardDimensions for Bulkhead Flareless Tube Connections FSC 4730; Should Be UsedInstead of MS33515, Which Was Cancelled on 13 January 2000 Adapter, Aircraft, JackingPoint, Design and Installation of FSC 1730; Should Be Used Instead ofMS33559E, Which Was Cancelled on 01 November 1999 Fittings, Installation ofFlareless Tube, Straight- Threaded Connectors FSC 4730; Should Be UsedInstead of MS33566, Which Was Cancelled on 14 September 2000 Tubing End Double Flare,Standard Dimensions for FSC 4730 Tube Bend Radii Strap, Tiedown, ElectricalComponents, Adjustable, Self-Clinching, Plastic, Type I, Class 1 FSC 5975;Should Be Used for New Design Instead of MS3367, Which Was Inact Strap, Tiedown, ElectricalComponents, Identification, Adjustable, Self-Clinching, Plastic, Type II,Class 1 Strip, Mounting, NutInsulating, for MS27212 Terminal Board Packing, Preformed, StraightThread Tube Fitting Boss, Hydraulic, -65 Degrees F to +275 Degress F FSC 5330 Connectors, Receptacle,Electric, Wall Mounting, Front Release, Crimp Contact, AN Type FSC 5935;Should Be Used for New Design Instead of MS3400, which Was Inactivate Connector, Receptacle,Electric, Box Mounting, Front Release, Crimp Contact, AN Type with FSC 5935;Should Be Used for New Design Instead of MS3402, Which Was Inactiv Connectors, Receptacle,Electric, Wall Mounting, Front Release, Crimp Contact, AN Type - withAccessory Threads FSC 5935; Should Be Used Instead of MS3412 Connectors, Receptacle,Electrical, Jam Nut Mounting, Rear Release Crimp Contact, AN Type FSC 5935;Should Be Used Instead of MS3454 Connector, Plug, Electrical,Self-Locking, Coupling Nut, Rear Release, Crimp Contact, AN Type FSC 5935;Should Be Used Instead of MS3459 Connector for Use with MS90362external Power Receptacle FSC 5935 Connector, Receptacle ExternalElectric Power, Aircraft, 28 Volt DC Operating Power FSC 5935 Gasket, Metallic, Encased,Annular, Copper FSC 5330 Connector, Air Duct Hose,Ground Cooling, Male FSC 4730 Connector, Air Duct Hose,Ground Cooling, Female FSC 4730 Packing, Preformed, Air DuctHose, Ground Cooling FSC 5330 Catch Assembly, Air Duct Hose,Ground Cooling FSC 4730 Hose Assembly,Polytetrafluoroethylene, Metallic Reinforced, 4000 psi, 160 Degrees F,Covered Pneumatic

Couplings, Hose, ReattachableScrew-On FSC 4730; Should Be Used Instead of MIL-C-38404E, Which WasCancelled on 20 October 1999 Universal Joint, AntifrictionBearings FSC 3010; Should Be Used Instead of MIL-U-3963A, Which Was Cancelledon 07 September 1999 Bearings, Roller, Needle,Airframe, Antifriction, Inch FSC 3110; Should Be Used Instead ofMIL-B-3990D(3), Which Was Cancelled on 05 April 1999 Rod End - Threaded, AircraftFSC 5340; Should Be Used Instead of AN490, Which Was Cancelled on 30 June1999 Lights, Instrument,Individual, General Specification for FSC 6220; Should Be Used Instead ofMIL-L-5057F, Which Was Cancelled on 7 September 1999 Wiring Aerospace Vehicle Gasket, Rubber, Synthetic FSC5330 Stud, Locked In-Ring Locked,Serrated FSC 5307 Stud, Locked In-Ring,Serrated, High Strength FSC 5307 Fuse Holder, Block Type,Aircraft FSC 5920; Should Be Used Instead of MIL-F-5373, Which Was Cancelledon 31 August 1999 Splicing; Cable Terminal,Process for, Aircraft FSC 5130; Should Be Used Instead of MIL-S-5676, WhichWas Cancelled on 29 October 1999 Circuit Breaker, Aircraft,Trip-Free Push Pull, Type I, Dual-Saftey, -55 Thru +121 Degrees C FSC 5925;Should Be Used Instead of MIL-C-5809/1, Which Was Cancelled on Terminals: Lug and Splice,Crimp Style, Aluminum, for Aluminum Aircraft Wire FSC 5940; Should Be UsedInstead of MIL-T-7099, Which Was Cancelled on 27 September 1999 Pipe Threads, Taper,Aeronautical National Form, Symbol ANPT - Design and Inspection Standard FSC4730 Marking of ElectricalInsulating Materials FSC 6145; Should be Used for New Design Instead of MIL-M81531,Which Was Inactivated for New Design on September 30, 1998 Coatings, Cadmium, Tin-Cadmiumand Zinc (Mechanically Deposited) Should Be Used Instead of MIL-C81562B,Which Was Cancelled on 21 September 1998 Timer Assembly Rain RepellentFSC 6630; Should Be Used Instead of MIL-T-81587A(AS), Which Was Cancelled on20 June 2000 Aluminum Foil for SandwichConstruction Should Be Used Instead of MIL-A-81596A, Which Was Cancelled onOctober 5, 1998 Connectors, Electric,Circular, Miniature, Rack and Panel or Push-Pull Coupling, EnvironmentResisting FSC 5935; Should Be Used for New Design Instead of MIL-C- 81703 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 22,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 20,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 16,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedback Type, Size 12,Series I FSC 5940

Terminal Junction System, RackAssembly, Track Feedback Type, Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 22,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 20,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 16,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Bussing Modules, Feedthru Type, Size 12,Series I FSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Single, Series IFSC 5940 Terminal Junction System,Terminal Junction Blocks, Sectional, Wire In-Line Junctions, Double, Series IFSC 5940 Plating, Tin-Lead(Electrodeposited) Chemical Milling of Metals,Specification for Bearings, Plain,Self-Aligning, Self-Lubricating, Low Speed Oscillation, General Specificationfor Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, -65Degrees to 325 Degrees F Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Wide, Chamfered Outer Ring, -65Degrees to 325 Degrees F Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Wide, Grooved Outer Ring, -65Degrees to 325 Degrees F Bearing, Plain, Self-Aligning,Self-Lubricating, Lined Bore, Low Speed, Narrow, Chamfered Outer Ring, -65Degrees to 325 Degrees F Wire, Electrical, SolderlessWrap, Insulated and Uninsulated, General Specification for Wire, Electrical, SolderlessWrap, Polyethylene Terephthalate-Polyester Laminated Tape Insulation, SilverCoated Solid Conductor FSC 6145; Should Be Used for New Desi Wire, Electrical, SolderlessWrap, Extruded Polyvinyidene Fluoride (PVDF) Insulation, Silver Coated SolidConductor FSC 6145; Should Be Used for New Design Instead of Wire, Electrical, SolderlessWrap, Fluorocarbon Polyimide Tape and Polytetrafluoroethylene (PTFE)Insulation, Silver Coated Solid Conductor FSC 6145; Should Be Used I Splices, Electric, Permanent,Crimp Style, Copper, Insulated, Environment Resistant FSC 5940; Should BeUsed Instead of MIL-S-81824, Which Was Cancelled on 31 August, Splice, Electric, Permanent,Crimp Style Copper, Insulated, Environment Resistant, Class 1 FSC 5940;Should Be Used Instead of MIL-T-81824/1, Which Was Cancelled on S Heat Transfer Fluid,Fluorochemical FSC 6850; Should Be Used Instead of MIL-H-81829, Which WasCancelled on 21 September 1999 Remover, Organic Coating, HotTank Type FSC 8010; Should Be Used Instead of MIL-R-81835(AS), Which WasCancelled on 24 August 1999 Tubing, Plastic, Flexible,Convoluted, Conduit, General Specification for Should Be Used for New DesignsInstead of MIL-T-81914, Which Was Inactivated for New Design

Tubing, Plastic, Flexible,Convoluted, Polytetrafluoroethylene, Standard Convolutions FSC 9330; ShouldBe Used Instead of MIL-T-81914/1(AS), Which Was Inactivated for Tubing, Plastic, ExtraFlexible, Convoluted, Polytetrafluoroethylene, Close Convolution FSC 9330;Should Be Used Instead of MIL-T-81914/2(AS), which Was Inactivated f Titanium and Titanium-AlloyCastings, Investment Should Be Used Instead of MIL-T-81915, Which WasCancelled on 21 September 1998 Bearings, Sleeve, Plain andFlanged, Self-Lubricating, General Specification for Bearing, Sleeve, Plain,Self-Lubricating, 325 Degrees F FSC 3120 Bearing, Sleeve, Flanged,Self-Lubricating, 325 Degrees F FSC 3120 Bearings, Plain, Rod End,Self-Aligning, Self- Lubricating, General Specification for Tubing, Plastic, Flexible,Convoluted, Fluorinated Ethylene Propylene, Standard Convolution FSC 9330;Should Be Used Instead of MIL-T-81914/3(AS), Which Was Inactivat Tubing, Plastic, ExtraFlexible, Convoluted, Fluorinated Ethylene Propylene, Close ConvolutionShould Be Used Instead of MIL-T-81914/4, Which Was Cancelled on Decembe Tubing, Plastic, ExtraFlexible, Convoluted, Ethylene- Tetrafluoroethylene, Close Convolution ShouldBe Used Instead of MIL-T-81914/5, Which Was Cancelled on December Tubing, Plastic, Flexible,Convoluted, Ethylene- Tetrafluoroethylene, Standard Convolution FSC 9330;Should Be Used Instead of MIL-T-81914/6(AS), Which Was Inactivate Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Wide, Externally Threaded, -65 Degrees F to+325 Degrees F FSC 3120 Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Wide, Internally Threaded, -65 Degrees F to+325 Degrees F FSC 3120 Locking Devices (for Rod EndBearings) FSC 5340 Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Narrow, Externally Threaded, -65 Degrees Fto +325 Degrees F FSC 3120 Tubing, Plastic, Flexible,Convoluted, Fluorinated Ethylene Propylene, Integral Braid FSC 5975; ShouldBe Used Instead of MIL-T-81914/7(AS), Which Was Inactivated for Bearing, Plain, Rod End,Self-Aligning, Self- Lubricating, Narrow, Internally Threaded, -65 Degrees Fto +325 Degrees F FSC 3120 Bearings, Plain,Self-Aligning, (BeCu Ball, CRES Race) General Specification for FSC 3120 Bearing, Plain, Self-Aligning,Be Cu Ball, CRES Race (with Stacking Groove) -65 to +350 Degrees F FSC 3120 Bearing, Plain, Self-Aligning,Be Cu Ball, CRES Race, - 65 to +350 Degrees F FSC 3120 Core Material, PlasticHoneycomb, Nylon Paper Base; for Aircraft Structural Applications Should BeUsed Instead of MIL-C-81986, Which Was Cancelled on December 18, 19 Coatings, Polyurethane, RainErosion Resistant for Exterior Aircraft and Missile Plastic Parts FSC 8010 Inspection Process, MagneticRubber

Coating System, Polyurethane,Nonyellowing, White, Rain Erosion Resistant, Thermally Reflective FSC 8010 Shield Termination, SolderStyle, Insulated, Heat- Shrinkable, Environment Resistant GeneralSpecification for FSC 5940; Should Be Used for New Design Instead of MILShield Termination, SolderStyle, Insulated, Heat- Shrinkable, Environment Resistant for Cables HavingTin or Silver Plated Shields (Class I) FSC 5940; Should Be Used Shield Termination, SolderStyle, Insulated, Heat- Shrinkable, Environment Resistant with Pre InstalledLeads for Cables Having Tin or Silver Plated Shields (Class I) Tie down Assembly, HelicopterBlade, General Specification for FSC 1730; Should Be Used Instead ofMIL-T85075A(AS), Which Was Cancelled on 26 May 2000 Fittings, Tube, Fluid Systems,Separable, Beam Seal, 3000/4000 psi, General Specification for FSC 4730 Fittings, Tube, Fluid Systems,Separable, High Pressure, Dynamic Beam Seal, General Specification for FSC4730 Fittings, Tube, Fluid Systems,Separable, High Pressure, Dynamic Beam Seal, Design Standard for Male End FSC4730 Cap, Dust, Plastic, ElectricConnector FSC 5340; To be Used Instead of MS 90376E Nut - Hex, Boss Connection,Cres FSC 5310 Bolt, Machine-Double HexagonExtended Washer Head, Close Tolerance Shank, AMS 5731, .190-32 UNJF-3A FSC5306 Bolt, Machine-Double HexagonExtended Washer Head, Close Tolerance Shank, AMS 5731, .250-28 UNJF-3A FSC5306 Bolt, Machine-Steel, 12 PointHead .375-24, Black Oxide FSC 5306 Pin, Straight, Headless,Steel, Oversize FSC 5315 Bolt-Machine, Steel, Drilled12 Point Head, .190(NO.10)-32, Black Oxide FSC 5306 Bolt-Machine, Steel, Drilled12 Point Head, .250-28, Black Oxide FSC 5306 Bolt-Machine, Steel, Drilled12 Point Head, .3125-24, Black Oxide FSC 5306 Bolt-Machine, Steel, Drilled12 Point Head, .375-24, Black Oxide FSC 5306 Nut, Plain, Hex, BossConnection, Aluminum FSC 5310 Screw - Flat Fillister Head,.190-32 FSC 5305

Screw, Machine - Steel, FlatFillister Head, .250-28 FSC 5305

Screw - Flat Fillister Head,.3125-24 FSC 5305

Screw - Flat Fillister Head,Drilled Shank, .190-32 FSC 5305

Screw - Flat Fillister Head,Drilled Shank, .250-28 FSC 5305

Screw - Flat Fillister,Drilled Head, .190-32 FSC 5305

Screw - Flat Fillister,Drilled Head, .250-20 FSC 5305

Screw - Flat Fillister,Drilled Head, .250-28 FSC 5305

Screw - Flat Fillister,Drilled Head, .3125.18 FSC 5305

Screw - Flat Fillister,Drilled Head, .3125-24 FSC 5305

Screw - Flat Fillister,Drilled Head, .375-16 FSC 5305

Screw - Flat Fillister,Drilled Head, .375-24 FSC 5305

Screw - Oval Fillister Head,.112-40 FSC 5305

Screw - Oval Fillister Head,.138.32 FSC 5305

Screw - Oval Fillister Head,.164-32 FSC 5305

Screw - Oval Fillister DrilledHead, .164-32 FSC 5305

Nut & Plain FSC 5310

Pin, Straight, Headed - .125Nom. FSC 5315

Pin, Straight, Headed - .187Nom. FSC 5315

Pin, Straight, Headed - .250Nom. FSC 5315

Pin, Straight, Headed - 312NOM. FSC 5315

Pin, Straight, Headed - 375NOM. FSC 5315

Pin, Straight, Headed - .500Nom. FSC 5315

Pin, Straight, Headless, SteelFSC 5315

Clamp - Loop Type Support(Heat Resistant) .204 Hole FSC 5340

Gasket - Aluminum - NonAsbestos, Annular FSC 5330

Rivet and Universal Head, HighTemperature, AMS 7229 FSC 5320

Rivet, Solid, Universal Head,AMS 7232 FSC 5320

Rivet, Solid, 100 Degree FlushHead, AMS 7229 FSC 5320

Rivet, Solid, 100 Degree FlushHead, AMS 7232 FSC 5320

Rivet - 100 Degree CountersunkHead, Corrosion Resistant Steel FSC 5320

Rivet-100 Degree CountersunkHead, Mild Steel R(1982)

Rivet - 100 DegreesCountersunk Head, Aluminum Alloy R(1991)

Rivet - Universal Head,Corrosion Resistant Steel FSC 5320

Rivet - Universal Head, MildSteel FSC 5320

Rivet-Universal Head, AluminumAlloy R(1991)

Stud - Straight, .3125-18 X.3125-24 FSC 5307

Stud - Straight, .375-16 X.375-24 FSC 5307

Stud - Straight, Necked,.375-16 X .375-24 FSC 5307

Stud - Straight, Necked,.4375-16 X .4375-20 FSC 5307

Stud - Straight, Drilled,.250-20 x .250-28 FSC 5307

Stud - Straight, Drilled,.3125-18 x .3125-24 FSC 5307

Stud - Straight, Drilled,.3125-18 X .3125-24 FSC 5307

Pin-Lock, Steel FSC 5315

Pin-Lock, Brass FSC 5315

Nut - Hex, Check FSC 5310

Stud, Stepped, 1.5 DiaEngagement, .250-20 X .190-32 FSC 5307

Stud, Stepped, 1.5 DiaEngagement, .3125-18 X .250-28 FSC 5307

Stud, Stepped, 1.5 DiaEngagement, .4375-14 x .375-24 FSC 5307

Stud-Stepped, 1.5 DiaEngagement, .500-13 x .4372-20 FSC 5307

Stud, Stepped, Drilled, 1.5Dia Engagement, .250-20 X .190-32 FSC 5307

Stud, Stepped, Drilled, 1.5Dia Engagement, .3125-18 X .250-28 FSC 5307

Stud, Stepped, Drilled, 1.5Dia Engagement, .375-16 x .3125-24

Stud, Stepped, 2 DiaEngagement .250-20 X .190-32 FSC 5307

Stud, Stepped, 2 DiaEngagement, .3125 X .250-28 FSC 5307

Stud, Stepped, 2 DiaEngagement, .375-16 X .3125-24 FSC 5307

Stud-Stepped, 2 DiaEngagement, .500-13 X .4375-20 FSC 5307

Stud-Stepped, Necked, 1.5 DiaEngagement, .4375-14 X .375-24 FSC 5307

Stud, Stepped, Drilled,Necked, 2 Dia Engagement, .4375 X .375-24 FSC 5307

(Withdrawn) Doors, Dutch,Recommended Standard *NOT CURRENT DOCUMENT (Withdrawn) Recommended LouverDetails for Standard Steel Doors *NOT CURRENT DOCUMENT (Withdrawn) Doors and Frames,Standard, Steel, Recommended Door, Frame and Hardware Schedule for *NOTCURRENT DOCUMENT (Withdrawn) RecommendedWeatherstripping for Standard Steel Doors and Frames *NOT CURRENT DOCUMENT

(Withdrawn) Doors and Frames,Standard, Steel, Recommended Completed Opening Anchors *NOT CURRENT DOCUMENT (Withdrawn) Doors and Frames,Standard, Steel, Recommended Standard Preparation for Double Type(Interconnected) Locks on *NOT CURRENT DOCUMENT Hardware on Steel Doors(Reinforcement- Application) Doors, Steel, Frames, Details,Recommended Standard Kitchen Equipment FabricationGuidelines First Edition Seismic Restraint ManualGuidelines for Mechanical Systems Second Edition (Discontinued) PaintSpecification No. 1 Red Lead and Raw Linseed Oil Primer (Steel StructuresPainting Manual, Ch 4 - Paint Specs.) Surface PreparationSpecifications Surface Preparation Commentary (Steel Structures PaintingManual, Ch 2 Surface Preparation Specs.) (Discontinued) PaintSpecification No. 2 Red Lead, Iron Oxide, Raw Linseed Oil and Alkyd Primer(Steel Structures Painting Manual, Ch 4 - Paint Specs.) (Discontinued) PaintSpecification No. 13 Red or Brown One-Coat Shop Paint (Steel StructuresPainting Manual, Ch 4 - Paint Specs.) Shop, Field, and MaintenancePainting (Steel Structures Painting Manual, Ch 5 - Paint Application Specs.) Three-Coat Oil Base Zinc OxidePainting System (Without Lead or Chromate Pigment) (Steel Structures PaintingManual, Ch 3 - Painting System Specs.) Solvent Cleaning (SteelStructures Painting Manual, Ch 2 - Surface Preparation Specs.) Visual Standard for AbrasiveBlast Cleaning Steel (Standard Reference Photographs) (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.) Measurement of Dry CoatingThickness with Magnetic Gages (Steel Structures Painting Manual, Ch 5 PaintApplication Specs.) Hand Tool Cleaning (SteelStructures Painting Manual, Ch 2 - Surface Preparation Specs.) Guide to Standard Method ofEvaluating Degree of Rusting on Painted Steel Surfaces (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.) Guide to Safety in PaintApplication (Steel Structures Painting Manual, Ch 5 - Paint ApplicationSpecs.) Power Tool Cleaning (SteelStructures Painting Manual, Ch 2 - Surface Preparation Specs.) Guide to MaintenanceRepainting with Oil Base or Alkyd Painting Systems (Steel Structures PaintingManual, Ch 5 - Paint Application Specs.) Painting System SpecificationNo. 4.01 Four-Coat Vinyl Painting System with Red Lead Primer (for Salt Wateror Chemical Use) (Steel Structures Painting Manual, Ch 3 Four-Coat Vinyl PaintingSystem (For Fresh Water, Chemical, and Corrosive Atmospheres) (SteelStructures Painting Manual, Ch 3 - Painting System Specs.) Zinc Dust, Zinc Oxide, andPhenolic Varnish Paint (Steel Structures Painting Manual, Ch 4 - PaintSpecs.) Joint Surface PreparationStandard White Metal Blast Cleaning NACE No. 1: 1999 (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.) Joint Surface PreparationStandard Commercial Blast Cleaning NACE No. 3: 1999 (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.)

Joint Surface PreparationStandard Brush-Off Blast Cleaning NACE No. 4: 2000 (Steel Structures PaintingManual, Ch 2 - Surface Preparation Specs.) Aluminum Vinyl Paint (SteelStructures Painting Manual, Ch 4 - Paint Specs.) Pickling (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.) White (or Colored) Vinyl Paint(Steel Structures Painting Manual, Ch 4 - Paint Specs.) Hot-Applied Coal Tar EnamelPainting System (Steel Structures Painting Manual, Ch 3 - Painting SystemSpecs.) Joint Surface PreparationStandard Near-White Metal Blast Cleaning NACE No. 2: 1999 (Steel StructuresPainting Manual, Ch 2 - Surface Preparation Specs.) Red Iron Oxide, Zinc Chromate,Raw Linseed Oil and Alkyd Primer (Steel Structures Painting Manual, Ch 4 -Paint Specs.) Black (or Dark Red) Coal TarEpoxy-Polyamide Painting System (Steel Structures Painting Manual, Ch 3 -Painting System Specs.) Power Tool Cleaning to BareMetal One-Coat Zinc-Rich PaintingSystem (Steel Structures Painting Manual, Ch 3 - Painting System Specs.) Epoxy-Polyamide PaintingSystem (Steel Structures Painting Manual, Ch 3 - Painting System Specs.) Steel Joist Shop PaintingSystem (Steel Structures Painting Manual, Ch 3 - Painting System Specs.) Steel Joist Shop Paint Type I,Red Oxide Paint Type II, Asphalt Coating (Steel Structures Painting Manual,Ch 4 - Paint Specs.) Coal Tar Epoxy-Polyamide Black(or Dark Red) Paint (Steel Structures Painting Manual, Ch 4 - Paint Specs.) Zinc-Rich Primers (Type I,"Inorganic," and Type II, "Organic") (Steel StructuresPainting Manual, Ch 4 - Paint Specs.) Epoxy-Polyamide Paints(Primer, Intermediate, and Topcoat) (Steel Structures Painting Manual, Ch 4 -Paint Specs.) Basic Zinc Chromate-VinylButyral Wash Primer (Steel Structures Painting Manual, Ch 4 - Paint Specs.) Aluminum Alkyd Paint Leafing(Type I) and Non-Leafing (Type II) (Steel Structures Painting Manual, Ch 4 -Paint Specs.) FOTP-35 Fiber Optic ComponentDust (Fine Sand) Test R(1999) UL Standard for Safety SurfaceMetal Raceways and Fittings Twelfth Edition; Reprint with Revisions Throughand Including October 2,2000 UL Standard for SafetyFlexible Metal Conduit Tenth Edition UL Standard for Safety ManualSignaling Boxes for Fire Alarm Systems Seventh Edition; Reprint withRevisions Through and Including June 12, 2001 UL Standard for SafetyThermoset-Insulated Wires and Cables Fifteenth Edition; Reprint withRevisions Through and Including May 14, 2001; Announcement Bulletins Dated UL Standard for SafetyFlexible Nonmetallic Tubing for Electric Wiring Tenth Edition

UL Standard for Safety ArmoredCable Fourteenth Edition; Reprint with Revisions Through and Including12/14/2001; Bulletins Dated 12/22/1999 (55p), 08/16/2000 (2p) UL Standard for Safety forPanelboards Eleventh Edition; Contains Revisions Through and IncludingJanuary 12,2000 UL Standard for Safety RigidMetal Conduit - Steel Twelfth Edition UL Standard for SafetyThermoplastic-Insulated Wires and Cables Twelfth Edition; Reprint withRevisions Through and Including 5/4/2001; Announcement Bulletins Dated 0 UL Standard for Safety Testfor Flammability of Plastic Materials for Parts in Devices and AppliancesFifth Edition; Reprinted with Revisions Through and Including 05 UL Standard for Safety FireTests of Window Assemblies Seventh Edition; Reprint with Revisions Throughand Including August 31, 2000 UL Standard for SafetyTin-Clad Fire Doors Twentieth Edition; Reprint with Revisions Through andIncluding 07/15/1998 UL Standard for Safety FireTests of Door Assemblies Ninth Edition UL Standard for Safety TubeFittings for Flammable and Combustible Fluids, Refrigeration Service, andMarine Use Sixth Edition; Reprint with Revisions Through and Inc UL Standard for SafetyCompressed Gas Regulators Seventh Edition; Reprint with Revisions Through andIncluding June 1, 2001 UL Standard for Safety Door,Drapery, Gate, Louver, and Window Operators and Systems Fourth Edition;Reprint with Revisions Through and Including June 11, 2001 UL Standard for SlidingHardware for Standard, Horizontally Mounted Tin-Clad Fire Doors EighthEdition; Reprint with Revisions Through and Including July 14, 2000 UL Standard for SafetySwinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and inPairs Seventh Edition UL Standard for Safety Wire Connectorsand Soldering Lugs for Use with Copper Conductors Ninth Edition; Reprint withRevisions Through and Including May 23, 2001 UL Standard for Safety WireConnectors for Use with Aluminum Conductors Fourth Edition; Reprint withRevisions Through and Including May 23, 2001 UL Standard for SafetyProtectors for Paired Conductor Communications Circuits Seventh Edition;Reprint with Revisions Through and Including May 21, 2001 UL Standard for SafetyMetallic Outlet Boxes Ninth Edition; Reprint with Revisions Through andIncluding June 4, 2001 UL Standard for SafetyNonmetallic Outlet Boxes, Flush- Device Boxes, and Covers Third Edition;Reprint with Revisions Through and Including June 4, 2001 UL Standard for Safety LinedFire Hose and Hose Assemblies Eleventh Edition; May 23, 1996 UL Standard for SafetyPolymeric Materials - Short Term Property Evaluations Fifth Edition UL Standard for SafetyPolymeric Materials - Long Term Property Evaluations Third Edition; Reprintwith Revisions Through and Including 11/29/2000 UL Standard for SafetyPolymeric Materials - Use in Electrical Equipment Evaluations Fourth Edition;Reprint with Revisions Through and Including 06/12/2001 UL Standard for SafetyPolymeric Materials - Fabricated Parts Sixth Edition; Reprint with RevisionsThrough and Including 06/14/2000 UL Standard for SafetyPolymeric Materials - Industrial Laminates, Filament Wound Tubing, VulcanizedFibre, and Materials Used in Printed-Wiring Boards Third Edition;

UL Standard for SafetyGeneral-Use Snap Switches Twelfth Edition; CSA-C22.2 No. 111 Third Edition UL Standard for SafetyPrinted-Wiring Boards Eighth Edition; Reprint with Revisions Through andIncluding 02/27/2001 UL Standard for SafetyTemperature-Indicating and - Regulating Equipment Eleventh Edition; Reprintwith Revisions Through and Including 5/4/2001 UL Standard for SafetyMicrowave Cooking Appliances Fourth Edition; Reprint with Revisions Throughand Including 07/20/1998 UL Standard for SafetyEmergency Lighting and Power Equipment Eighth Edition; Reprint with RevisionsThrough and Including 03/02/2001 UL Standard for SafetyFluorescent-Lamp Ballasts Tenth Edition UL Standard for SafetyHousehold Electric Coffee Makers and Brewing-Type Appliances Fifth Edition;Reprint with Revisions Through and Including May 4, 2001 UL Standard for SafetyIntermediate Metal Conduit Third Edition; Reprint with Revisions Through andIncluding May 31, 2001 UL Standard for SafetyTransient Voltage Surge Suppressors Second Edition; Reprint with RevisionsThrough and Including 06/06/2001 UL Standard for SafetyReference Standard for Electrical Wires, Cables, and Flexible Cords ThirdEdition; Reprint with Revisions Through and Including 05/14/2001; Bul UL Standard for Safety MetalWaste Cans Fifth Edition; Reprint with Revisions Through and Including7/16/1999 UL Standard for Safety HeatResponsive Links for Fire- Protection Service Sixth Edition; Reprint withRevisions Through and Including 9/2/1999 UL Standard for SafetyPortable Electric Tools Eighth Edition; Reprint with Revisions Through andIncluding January 5, 2000 (National Fire Codes, vol. 2) UL Standard for SafetyEnclosures for Electrical Equipment Eleventh Edition; Reprint with RevisionsThrough and Including 11/19/1999 UL Standard for Safety SteelUnderground Tanks for Flammable and Combustible Liquids Ninth Edition;Reprint with Revisions Through and Including 07/27/1998 UL Standard for SafetyFlexible Cord and Fixture Wire Sixteenth Edition; Reprint with RevisionsThrough and Including 03/13/2001; Announcement Bulletin Dated 10/30/19 UL Standard for Safety forPanelboards Eleventh Edition; Contains Revisions Through and IncludingJanuary 12,2000; Bulletins Dated 03/17/2000 (8p), 09/20/2000 (12p), UL Standard for Safety SepticTanks, Bituminous Coated Metal Sixth Edition; May 13, 1996 UL Standard for SafetyMotor-Operated Appliances Eighth Edition; Reprint with Revisions Through andIncluding 11/09/1998 UL Standard for Safety SteelTanks for Oil-Burner Fuel Tenth Edition; This Standard Contains RevisionsThrough and Including July 30, 1999 UL Standard for SafetyPower-Operated Dispensing Devices for Petroleum Products Tenth Edition;Reprint with Revisions Through and Including 10/02/1998 UL Standard for Safety FireExtinguisher and Booster Hose Tenth Edition; Contains Reprint with RevisionsThrough and Including 02/29/2000 UL Standard for SafetyLightning Protection Components Fourth Edition; Reprint with RevisionsThrough and Including 01/06/2000

UL Standard for SafetyInstallation Requirements for Lightning Protection Systems Tenth Edition;Reprint with Revisions Through and Including 07/08/1998 UL Standard for SafetyEnclosed and Dead-Front Switches Twelfth Edition; Reprint with RevisionsThrough and Including 06/16/1998 UL Standard for SafetyFactory-Built Chimneys for Residential Type and Building Heating AppliancesNinth Edition; Reprint with Revisions Through and Including 3/17/19 UL Standard for Safety forOxy-Fuel Gas Torches Tenth Edition UL Standard for SafetyElectric Heating Pads Eleventh Edition; Reprint with Revisions Through andIncluding 06/19/2000 UL Standard for Safety SteelAboveground Tanks for Flammable and Combustible Liquids Seventh Edition;Reprint with Revisions Through and Including 07/22/1998; Bulleti UL Standard for SafetyHand-Held Torches for Fuel Gases Fifth Edition; Containa Revisions Throughand Including 03/17/2000 UL Standard for SafetyPortable Electric Lamps Eleventh Edition; Reprint with Revisions Through andIncluding 09/29/2000; Bulletins Dated 12/17/1999 (176p) UL Standard for SafetyCarbon-Dioxide Fire Extinguishers Eighth Edition; Reprint with RevisionsThrough and Including 03/30/2000 UL Standard for Safety forHousehold Electric Storage Tank Water Heaters Tenth Edition; Reprint withRevisions Through and Including 10/06/1999 UL Standard for SafetyFactory-Made Air Ducts and Connectors Ninth Edition; Reprint with RevisionsThrough and Including 12/14/1998 UL Standard for Safety ClosureSystems for Use with Flexible Air Ducts and Air Connectors First Edition;Reprint with Revisions Through and Including May 18,2000 UL Standard for Safety X-RayEquipment Seventh Edition; Reprint with Revisions Through and Including07/09/1999; Announcement Bulletins Located at the End of the Stan UL Standard for SafetyCommercial Electric Cooking Appliances Eighth Edition; Reprint with RevisionsThrough and Including 4/10/2000 UL Standard for SafetyHigh-Interrupting-Capacity Fuses, Current-Limiting Types Fifth Edition;Reprint with Revisions Through and Including February 25, 1998 UL Standard for Safety Class RFuses Fourth Edition; Revision July 13, 1988 UL Standard for Safety Class TFuses Fourth Edition; November 9, 1993 UL Standard for SafetyRefrigerant-Containing Components and Accessories, Nonelectrical SixthEdition; Reprint with Revisions Through and Including 10/29/1997 UL Standard for SafetyCellular Metal Floor Raceways and Fittings Eighth Edition UL Standard for Safety Testsfor Flame-Propagation of Fabrics and Films Sixth Edition UL Standard for Safety DoorClosers-Holders, with or without Integral Smoke Detectors Fourth Edition;Reprint with Revision 01/21/1999 Included UL Standard for SafetyHydrants for Fire-Protection Service Seventh Edition; Reprint with RevisionsThrough and Including 12/15/1998 UL Standard for SafetyHousehold Refrigerators and Freezers Tenth Edition; CAN/CSA-C22.2 NO. 6393;Reprint with Revisions Through and Including 08/25/2000 UL Standard for Safety GateValves for Fire-Protection Service Seventh Edition; Reprint with RevisionsThrough and Including 12/17/1998 UL Standard for Safety OilBurners Ninth Edition; Reprint with Revisions Through and Including09/08/1998

UL Standard for SafetyPortable Electric Hand Lamps Fourth Edition; Reprint with Revisions Throughand Including 09/16/1998 UL Standard for Safety DryChemical Fire Extinguishers Ninth Edition; Reprint with Revisions Through andIncluding 03/30/2000 UL Standard for Safety CheckValves for Fire- Protection Service Eighth Edition; September 9, 1996 UL Standard for Safety Hoseand Hose Assemblies for Dispensing Flammable Liquids Sixth Edition; Reprintwith Revisions Through and Including 2/1/2000 UL Standard for Safety Pumpsfor Oil-Burning Appliances Eighth Edition; Reprint with Revisions Through andIncluding 12/22/1999 UL Standard for Safety LimitControls Fifth Edition; Reprint with Revisions Through and Including04/30/2001 UL Standard for SafetyLiquid-Tight Flexible Steel Conduit Fourth Edition; Reprint with RevisionsThrough and Including 10/17/1997 UL Standard for Safety PrimarySafety Controls for Gas- and Oil-Fired Appliances Fifth Edition; Reprint withRevision Through and Including 09/01/2000; Bulletins Date UL Standard for Safety DraftEquipment Third Edition; Reprint with Revisions Through and Including05/22/1998 UL Standard for SafetyDrinking Water Coolers Sixth Edition; Reprint with Revisions Through andIncluding 12/01/1998 UL Standard for SafetyPortable Spray Hose Nozzles for Fire-Protection Service Third Edition;Reprint with Revisions Through and Including 12/15/1998 UL Standard for Safety Gauges,Indicating Pressure, for Compressed Gas Service Sixth Edition;Reprint withRevisions Through and Including 12/21/1999 UL Standard for SafetyRefrigeration Unit Coolers Third Edition; Reprint with Revisions Through andIncluding 11/10/1998 UL Standard for Safety MeterSockets Seventh Edition UL Standard for SafetyRefrigerating Units Third Edition; Reprint with Revisions Through andIncluding 10/30/1998 UL Standard for SafetyElectrically Operated Valves Fifth Edition; Reprint with Revisions Throughand Including 12/6/2000 UL Standard for Safety WasteDisposers Fifth Edition; Reprint with Revisions Through and Including3/29/2001 UL Standard for Safety KeyLocks Seventh Edition UL Standard for Safety GasVents Ninth Edition; Reprint with Revisions Through and Including 12/30/1999 UL Standard for Safety Groundingand Bonding Equipment Seventh Edition; Reprint with Revisions Through andIncluding 02/09/2001; Announcement Bulletins Dated 1/14/199 UL Standard for SafetyCommercial Refrigerators and Freezers Eighth Edition; Reprint with RevisionsThrough and Including 04/27/1998 UL Standard for SafetyDehumidifiers Seventh Edition; Reprint with Revisions Through and Including03/31/1998 UL Standard for Safety RoomAir Conditioners Seventh Edition; Reprint with Revisions Through and Including2/24/1999 UL Standard for SafetySplicing Wire Connectors Fourth Edition

UL Standard for SafetyMolded-Case Circuit Breakers, Molded-Case Switches, and Circuit-BreakerEnclosures Ninth Edition; Reprint with Revisions Through and Including UL Standard for SafetyEdison-Base Lampholders Eleventh Edition; Reprint with Revisions Through andIncluding 4/11/2000 UL Standard for SafetyProtectors for Data Communications and Fire Alarm Circuits Third Edition UL Standard for SafetyAttachment Plugs and Receptacles Thirteenth Edition; Reprint with RevisionsThrough and Including 01/21/1999 UL Standard for SafetyElectric Heating Appliances Twelfth Edition; Reprint with Revisions Throughand Including 07/17/1998 UL Standard for SafetySpecialty Transformers Twelfth Edition UL Standard for SafetyElectric Fans Ninth Edition UL Standard for SafetyIndustrial Control Equipment Seventeenth Edition; Reprint with RevisionsThrough and Including 01/22/2001 UL Standard for SafetyPolyvinyl Chloride, Polyethylene, and Rubber Insulating Tape Seventh Edition;Reprint with Revisions Through and Including 04/01/1998 UL Standard for SafetyPorcelain Cleats, Knobs, and Tubes Sixth Edition; Reprint with Revision07/28/1998 Included UL Standard for SafetyFuseholders Tenth Edition; Reprint with Revisions Through and Including3/18/1999 UL Standard for SafetyMetallic Outlet Boxes Ninth Edition; Reprint with Revisions Through andIncluding 12/20/1999 UL Standard for SafetyFittings for Cable and Conduit Fourth Edition; Reprint with Revisions Throughand Including October 21,1998; Bulletins Dated 8/20/1999 (4p), 12 UL Standard for Safety HeatDetectors for Fire Protective Signaling Systems Seventh Edition UL Standard for SafetyLampholders, Starters, and Starter Holders for Fluorescent Lamps EighthEdition UL Standard for Safety Medicaland Dental Equipment Fourth Edition; Reprint with Revisions Through andIncluding 7/9/1999; Announcement Bulletins Located at the End o UL Standard for Safety FireDampers Sixth Edition; Reprint with Revisions Through and Including10/27/2000 UL Standard for Safety SmokeDampers Fourth Edition; Reprint with Revisions Through and Including10/27/2000 UL Standard for SafetyIndustrial Trucks, Internal Combustion Engine-Powered Ninth Edition; Reprintwith Revisions Through and Including 09/02/1998 UL Standard for Safety Floor-FinishingMachines Fifth Edition; Reprint with Revisions Through and Including12/16/1998 UL Standard for SafetyElectric Oil Heaters Seventh Edition UL Standard for Safety Testsfor Uplift Resistance of Roof Assemblies Fourth Edition; Reprint withRevisions Through and Including 02/06/1998 UL Standard for SafetyHigh-Efficiency, Particulate, Air Filter Units Eighth Edition; Reprint withRevisions Through and Including 8/2/1999 UL Standard for Safety IceCream Makers Fifth Edition; Revisions Through and Including March 27, 2000 UL Standard for SafetyConnectors and Switches for Use with Burglar-Alarm Systems Eighth Edition UL Standard for Safety HoldupAlarm Units and Systems Tenth Edition;; Reprint with Revision Through andIncluding 3/30/2001

UL Standard for SafetyIntrusion-Detection Units Seventh Edition; Reprint with Revisions Through andIncluding 3/29/1999 UL Standard for SafetyContainer Assemblies for LP-Gas Eighth Edition UL Standard for SafetySchedule 40 and 80 Rigid PVC Conduit Sixth Edition; Reprint with RevisionsThrough and Including 10/16/1998 UL Standard for Safety Type EBand A Rigid PVC Conduit and HDPE Conduit Fourth Edition UL Standard for SafetyCommercial Dry-Cleaning Machines (Type IV) Fourth Edition; Reprint withRevisions Through and Including 03/11/1998 UL Standard for SafetyElectric Motors and Generators for Use in Division 1 Hazardous (Classified)Locations Third Edition; Reprint with Revisions Through and Includi UL Standard for SafetyInstallation and Classification of Burglar and Holdup Alarm SystemsThirteenth Edition; Reprint with Revisions Through and Including 01/19/2001 UL Standard for Safety Burglary-ResistantSafes Thirteenth Edition UL Standard for SafetyIndustrial Control Equipment for Use in Hazardous (Classified) LocationsTwelfth Edition; Reprint with Revisions Through and Including 3/15/199 UL Standard for Safety PowerVentilators Fifth Edition; Reprint with Revisions Through and Including02/08/1999 UL Standard for Safety ExhaustHoods for Commercial Cooking Equipment Fifth Edition; Reprint with RevisionsThrough and Including 4/14/1999 UL Standard for Safety FireExtinguishers, Rating and Fire Testing of Fifth Edition; Reprint withRevisions Through and Including 3/30/1999 UL Standard for SafetyNonmetallic-Sheathed Cables Tenth Edition; Reprint with Revisions Through andIncluding 02/28/2001 UL Standard for Safety Testfor Surface Burning Characteristics of Building Materials Eighth Edition;Reprint with Revision 12/24/1998 Included UL Standard for SafetyOil-Fired Boiler Assemblies Seventh Edition; Reprint with Revisions Throughand Including 01/26/2001 UL Standard for SafetyOil-Fired Central Furnaces Eighth Edition; Reprint with Revisions Through andIncluding 01/18/1999 UL Standard for SafetyOil-Fired Unit Heaters Fifth Edition; Reprint with Revision 01/19/1999Included UL Standard for SafetyOil-Fired Storage Tank Water Heaters Fifth Edition; Reprint with RevisionsThrough and Including 01/19/1999 UL Standard for SafetyHousehold Dishwashers Seventh Edition; CSA C22.2 No. 167-97; Reprint withRevisions Through and Including 2/22/1999 UL Standard for SafetyBullet-Resisting Equipment Tenth Edition UL Standard for SafetyMotor-Operated Commercial Food Preparing Machines Third Edition UL Standard for Safety CombinationLocks Seventh Edition UL Standard for Safety Plug-InLocking Type Photocontrols for Use with Area Lighting Fourth Edition; Reprintwith Revisions Through and Including 10/17/2000 UL Standard for Safety forNonindustrial Photoelectric Switches for Lighting Control Fourth Edition;Reprint with Revisions Through and Including 10/14/1999 UL Standard for SafetyMotor-Operated Water Pumps Third Edition; Reprint with Revisions Through andIncluding 09/28/2000 UL Standard for SafetyElectrically Conductive Floorings Seventh Edition; January 23, 1997

UL Standard for SafetyPortable Electric Lighting Units for Use in Hazardous (Classified) LocationsSixth Edition; Reprint with Revisions Through and Including 3/15/1 UL Standard for SafetyElectric Flashlights and Lanterns for Use in Hazardous (Classified) LocationsFifth Edition; This Standard Contains Revisions Through and Inclu UL Standard for SafetyKey-Locked Safes (Class KL) Sixth Edition UL Standard for SafetyIndicator Posts for Fire- Protection Service Ninth Edition; Includes Reprintwith Revisiions Through and Including 03/01/2000 UL Standard for Safety Testsfor Fire Resistance of Roof Covering Materials Seventh Edition; Reprint withRevisions Through and Including 07/24/1998 UL Standard for SafetyCommercial-Industrial Gas Heating Equipment Fifth Edition UL Standard for SafetyElectrical Metallic Tubing Seventh Edition UL Standard for Safety Cord Setsand Power-Supply Cords Eleventh Edition UL Standard for Safety Valvesfor Flammable Fluids Eighth Edition; Reprint with Revisions Through andIncluding 10/28/1999 UL Standard for SafetyElectric Lighting Fixtures for Use in Hazardous (Classified) LocationsEleventh Edition; Reprint with Revisions Through and Including 3/16/1999 UL Standard for Safety MotorControl Centers Fourth Edition; Reprint with Revisions Through and IncludingMay 17,2000 UL Standard for Safety Service-EntranceCables Tenth Edition; Reprint with Revisions Through and Including 04/17/2001 UL Standard for Safety BuswaysTwelfth Edition UL Standard for SafetyHousehold Electric Ranges Fourteenth Edition; Reprint with Revisions Throughand Including 4/28/2000 UL Standard for SafetyTime-Indicating and -Recording Appliances Seventh Edition; Reprint withRevisions Through and Including December 14,2000 UL Standard for Safety ControlUnits for Fire- Protective Signaling Systems Eighth Edition; Reprint withRevisions Through and Including 3/30/1999 UL Standard for SafetyElectrostatic Air Cleaners Fourth Edition UL Standard for SafetyReference Standard for Service Equipment Third Edition UL Standard for SafetyWireways, Auxiliary Gutters, and Associated Fittings Seventh Edition; Reprintwith Revisions Through and Including 8/20/1999 UL Standard for SafetyUnderfloor Raceways and Fittings Tenth Edition UL Standard for Safety OutletBoxes and Fittings for Use in Hazardous (Classified) Locations Tenth Edition;Reprint with Revisions Through and Including 4/13/1999 UL Standard for SafetyDead-Front Switchboards Tenth Edition UL Standard for SafetySwitches for Use in Hazardous (Classified) Locations Seventh Edition; Reprintwith Revisions Through and Including 8/4/99 UL Standard for Safety AirFilter Units Sixth Edition; Reprint with Revisions Through and Including10/4/1999 UL Standard for Safety Testfor Flame-Propagation and Smoke-Density Values for Electrical andOptical-Fiber Cables Used in Spaces Transporting Environmental Air Fifth UL Standard for Safety EnergyManagement Equipment Third Edition; Announcement Bulletin Dated 03/06/1996Located at the End of the Standard

UL Standard for SafetyCommercial Electric Dishwashers Fifth Edition; Reprint with Revisions Throughand Including 3/16/2000 UL Standard for SafetyGround-Fault Circuit- Interrupters Third Edition; Reprint with RevisionsThrough and Including 09/18/2000 UL Standard for Safety FusedPower-Circuit Devices Fourth Edition; Reprint with Revisions Through andIncluding 3/22/1999 UL Standard for SafetyHermetic Refrigerant Motor- Compressors Seventh Edition UL Standard for SafetyStationary and Fixed Electric Tools Sixth Edition; Reprint with RevisionsThrough and Including 09/14/2000 UL Standard for Safety WindResistance of Prepared Roof Covering Materials Fifth Edition; Reprint withRevision Through and Including 07/22/1998 UL Standard for SafetyHumidifiers Third Edition; Bulletin June 14, 1994 (CSA-C22.2 No. 104-93)Third Edition; CSA-C22.2 No. 104-93 UL Standard for SafetyElectric Motors Fifth Edition; Reprint with Revisions Through and Including02/07/2001 UL Standard for SafetyTransfer Switch Equipment Fifth Edition; Reprint with Revisions Through andIncluding 02/12/1999 UL Standard for SafetyReceptacle-Plug Combinations for Use in Hazardous (Classified) LocationsSixth Edition; Reprint with Revisions Through and Including 3/16/1999 UL Standard for Safety PowerUnits Other Than Class 2 Sixth Edition; Reprint with Revisions Through andIncluding May 24,2000 UL Standard for Safety VacuumCleaners, Blower Cleaners, and Household Floor Finishing Machines FifthEdition; CAN/CSA C22.2 No. 243-M91; Reprint with Revisions Throu UL Standard for SafetyHigh-Intensity-Discharge Lamp Ballasts Fifth Edition; Reprint with RevisionsThrough and Including 02/07/2001 UL Standard for SafetySheathed Heating Elements Sixth Edition; Reprint with Revisions Through andIncluding 10/12/2000 UL Standard for SafetyBurglary-Resistant Electric Locking Mechanisms Fifth Edition UL Standard for SafetyElectric Baseboard Heating Equipment Fourth Edition; Reprint with RevisionsThrough and Including 09/09/1998 UL Standard for SafetyGround-Fault Sensing and Relaying Equipment Sixth Edition UL Standard for SafetyElectrically Conductive Equipment and Materials for Use in FlammableAnesthetizing Locations Third Edition UL Standard for SafetyProprietary Burglar Alarm Units and Systems Fifth Edition; Reprint withRevisions Through and Including 02/01/1999 UL Standard for SafetySupplementary Protectors for Use in Electrical Equipment Fifth Edition UL Standard for SafetyHousehold Trash Compactors Fourth Edition; Reprint with Revisions Through andIncluding 12/1/1999 UL Standard for SafetyHalogenated Agent Fire Extinguishers Fifth Edition; Reprint with RevisionsThrough and Including March 24, 2000 UL Standard for SafetyFloating Waterlights Third Edition UL Standard for Safety ElectricCommercial Clothes- Washing Equipment Third Edition; Reprint with RevisionsThrough and Including May 24, 2000

UL Standard for Safety BatteryChargers for Charging Engine-Starter Batteries Fifth Edition; Reprint withRevisions Through and Including 3/31/99 UL Standard for SafetyElectrical and Electronic Measuring and Testing Equipment Fourth Edition;Announcement Bulletins Dated 06/05/1996 and 03/06/1998 Located at the UL Standard for SafetyLaboratory Equipment Third Edition; Reprint with Revisions Through andIncluding 03/15/2000 UL Standard for SafetyElectromagnetic Interference Filters Fourth Edition UL Standard for SafetyGlass-Fiber-Reinforced Plastic Underground Storage Tanks for Petroleum Products,Alcohols, and Alcohol-Gasoline Mixtures Second Edition; April UL Standard for SafetyAcross-the-Line, Antenna Coupling and Line-by-Pass Capacitors for RadioandTelevision- Type Appliances Sixth Edition; Both Fifth and Sixth Ed UL Standard for SafetyAcross-the-Line, Antenna Coupling and Line-by-Pass Capacitors for RadioandTelevision- Type Appliances Fifth Edition; Reprint with Revision 0 UL Standard for SafetyElectrical Analog Instruments - Panel Board Types Third Edition UL Standard for Safety FireTests of Through- Penetration Firestops Second Edition; Reprint withRevisions Through and Including 08/24/2000 UL Standard for SafetyInsect-Control Equipment - Electrocution Type Third Edition UL Standard for SafetyMetal-Clad Cables Third Edition; Reprint with Revisions Through and Including4/12/2001 UL Standard for SafetyFluorescent Lighting Fixtures Fourth Edition; Reprint with Revisions Throughand Including 11/23/1999 UL Standard for SafetyIncandescent Lighting Fixtures Fourth Edition; Reprint with Revisions Throughand Including 11/23/1999; Bulletins Dated 07/28/2000 (9p) UL Standard for Safety HighIntensity Discharge Lighting Fixtures Fourth Edition; Reprint with RevisionsThrough and Including 11/24/1999 UL Standard for SafetyCentral-Station Burglar-Alarm Units Third Edition UL Standard for Safety Testfor Flame Propagation Height of Electrical and Optical-Fiber Cables InstalledVertically in Shafts Fourth Edition UL Standard for SafetyHigh-Pressure Cleaning Machines Second Edition; Reprint with RevisionsThrough and Including February 8, 2001 UL Standard for Safety Safetyof Information Technology Equipment, Including Electrical Business EquipmentSecond Edition; Reprint with Revisions Through and Includin UL Standard for Safety Heatingand Cooling Equipment Second Edition; CAN/CSA C22.2 NO. 236-95; Reprint withRevisions Through and Including 08/31/1999 UL Standard for Safety Safetyon Information Technology Equipment Third Edition; CAN/CSA-C22.2 No.60950-00; Announcement Bulletin Dated 7/23/1999 is Located at the End (Withdrawn) Minimum Performanceand Safety Requirements for Components and Systems of ContinuousFlowAnesthesia Machines for Human Use Includes Correction January-1 (Withdrawn) Humidifiers andNebulizers for Medical Use (Withdrawn) Requirements forOxygen Analyzers for Monitoring Patient Breathing- Mixtures (Withdrawn) Personnel Protection- Protective Headwear for Industrial Workers - Requirements Revised toISEA/ANSI-1996 (Withdrawn) Emergency Eyewash andShower Equipment Revised to ISEA Z358.1-1998

(Withdrawn) Method of Measurementand Calibration of Upright Cylindrical Tanks ASTM D1220; ANSI Z11.197;R(1992) Method for the Calibration ofMicrophones R(1986) (Withdrawn) Safety Requirementsfor Window Cleaning (Withdrawn) Addenda to A39.1 -1995 Safety Requirements for Window Cleaning (Withdrawn) Addenda to A39.1 -1995 Safety Requirements for Window Cleaning (Withdrawn) Cast Copper AlloySolder Joint Fittings for Sovent Drainage Systems (Withdrawn) Gauges - PressureIndicating Dial Type - Elastic Element Special Notice - 1992; Superseded byB40.100-1998 (Withdrawn) Procedures forTesting Pallets Superseded by MH1-1997 (Withdrawn) DigitalRepresentation for Communication of Product Definition Data Tapered and Reduced Cross SectionRetaining Rings (Inch Series) Incorporating ASME B18.27.1, B18.27.2,B18.27.3, B18.27.4, and B18.27.5; Addenda A - 1999; Addenda B Standard Specification for Carbon Steel Tee Rails Standard Specification for Steel Castings, Carbon, for GeneralApplication R(2000) Standard Specification for Carbon Structural Steel Standard Specification for Ferritic Malleable Iron Castings Standard Specification for Gray Iron Castings E1-1998 Standard Specification for Steel Tie Plates, Low- Carbon andHigh-Carbon-Hot-Worked Standard Specification for Steel Wire, Plain, for ConcreteReinforcement E1-2001; AASHTO No.: M 32 Standard Test Method for Weight [Mass] of Coating on Iron andSteel Articles with Zinc or Zinc-Alloy Coatings Standard Specification for Carbon Steel Forgings for PipingApplications Standard Specification for Seamless Carbon Steel Pipe forHigh-Temperature Service E1-1999 Standard Specification for Steel Bars, Carbon, Cold- Finished,Standard Quality Standard Specification for Metallic-Coated, Steel- Woven WireFence Fabric Standard Specification for Zinc (Hot-Dip Galvanized) Coatings onIron and Steel Products Standard Specification for Steel Springs, Helical, Heat-TreatedE1-1996 Standard Specification for Gray Iron Castings for Valves,Flanges, and Pipe Fittings R(2001) Standard Specification for Pipe, Steel, Electric- Fusion(Arc)-Welded (Sizes NPS 16 and over) Standard Specification for Electric-Fusion (Arc)- Welded SteelPipe (NPS 4 and Over) Standard Practice for Safeguarding Against Embrittlement ofHot-Dip Galvanized Structural Steel Products and Procedure for DetectingEmbrittlement R(1999) Standard Specification for Zinc Coating (Hot-Dip) on Iron andSteel Hardware AASHTO No.: M232

Standard Specification for Automotive Gray Iron Castings R(2001) Standard Specification for Stainless and Heat- ResistingChromium-Nickel Steel Plate, Sheet, and Strip Standard Specification for Stainless and Heat- ResistingChromium Steel Plate, Sheet, and Strip Standard Specification for Carbon Steel Forgings, forGeneral-Purpose Piping Standard Specification for Forged or Rolled Alloy- Steel PipeFlanges, Forged Fittings, and Valves and Parts for High-Temperature Service Standard Specification for Carbon Steel Track Bolts and Nuts Standard Specification for Steel Welded Wire Fabric, Plain, forConcrete Reinforcement Standard Specification for Alloy-Steel and Stainless SteelBolting Materials for High-Temperature Service

Standard Specification for Carbon and Alloy Steel Nuts for Boltsfor High Pressure or High Temperature Service, or Both Standard Specification for Cupola Malleable Iron Standard Specification for Pressure Vessel Plates, Alloy Steel,Nickel Standard Specification for Pressure Vessel Plates, Alloy Steel,Molybdenum R(1999) Standard Specification for Seamless Ferritic and AusteniticAlloy-Steel Boiler, Superheater, and HeatExchanger Tubes Standard Specification for Electric-Resistance-Welded CarbonSteel Heat-Exchanger and Condenser Tubes Standard Specification for Steel Castings, Carbon, Suitable forFusion Welding, for High-Temperature Service R(1998) Standard Specification for Steel Castings, Martensitic Stainlessand Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service Standard Specification for Pearlitic Malleable Iron Standard Specification for Steel Wire, Cold-Drawn for MechanicalSprings Standard Specification for Steel Wire, Music Spring Quality Standard Specification for Steel Wire, Oil-Tempered Carbon ValveSpring Quality Standard Specification for Chromium-Vanadium Alloy Steel SpringWire Standard Specification for Chromium-Vanadium Alloy Steel ValveSpring Quality Wire Standard Practice for Locating the Thinnest Spot in a Zinc(Galvanized) Coating on Iron or Steel Articles R(1999)

Standard Specification for High-Strength Low-Alloy StructuralSteel AASHTO No.: M 161

Standard Test Method for Evaluating the Microstructure ofGraphite in Iron Castings R(1998) Standard Specification for Welded Austenitic Steel Boiler,Superheater, Heat-Exchanger, and Condenser Tubes Standard Specification for Welded and Seamless Steel Pipe PilesE1-2000 Standard Specification for Copper-Brazed Steel Tubing Standard Practices for Detecting Susceptibility to IntergranularAttack in Austenitic Stainless Steels Standard Specification for Nickel and Nickel-Base Alloy-CladSteel Plate R(1999) Standard Specification for Seamless and Welded Ferritic andMartensitic Stainless Steel Tubing for General Service Standard Specification for Stainless Steel Bars and Shapes Standard Specification for Low and Intermediate Tensile StrengthCarbon Steel Plates Standard Specification for High-Carbon Anti-Friction Bearing Steel Standard Specification for Pressure Vessel Plates, Alloy Steel,Manganese-Molybdenum and ManganeseMolybdenum-Nickel E1-1999 Standard Specification for Carbon Steel Bolts and Studs, 60 000psi Tensile Strength Standard Specification for Steel Sheet, Terne (Lead- Tin Alloy)Coated by the Hot-Dip Process Standard Test Method for Weight and Composition of Coating onTerne Sheet by the Triple-Spot Test Standard Specification for Stainless Steel Spring Wire Standard Specification for Stainless Steel Billets and Bars forForging Standard Specification for Alloy/Steel Bolting Materials forLow-Temperature Service Standard Specification for Steel Bars, Alloy, Standard GradesR(1996) Standard Specification for Structural Bolts, Steel, HeatTreated, 120/105 ksi Minimum Tensile Strength AASHTO No.: M 164 Standard Specification for High-Strength Bolts for StructuralSteel Joints (Metric) Standard Test Methods for Impact Testing of Cast Irons R(1997) Standard Specification for Steel Sheet Piling AASHTO No.: M 202 Standard Specification for Seamless and Welded Steel Pipe forLow-Temperature Service Standard Specification for Seamless Ferritic Alloy- Steel Pipefor High-Temperature Service Standard Specification for Alloy Steel Forgings for Pressure andHigh-Temperature Parts E1-2000 Standard Test Methods for Permeability of Feebly MagneticMaterials

Standard Specification for Castings, Austenitic,Austenitic-Ferritic (Duplex), for Pressure-Containing Parts Used in USDOE-NEStandards Standard Specification for Steel Castings, Ferritic andMartensitic, for Pressure-Containing Parts, Suitable for Low-TemperatureService R(1998) Standard Specification for Quenched and Tempered Alloy SteelBolts, Studs, and Other Externally Threaded Fasteners Standard Specification for Commercial Steel (CS) Sheet, Carbon,(0.15 Maximum Percent) Cold-Rolled E11998 Standard Practice for Cleaning, Descaling, and Passivation ofStainless Steel Parts, Equipment, and Systems E12000 Standard Practice for Providing High-Quality Zinc Coatings(Hot-Dip) Standard Specification for Pressure Vessel Plates, Alloy Steel,Chromium-Molybdenum E1-2001 (Withdrawn) Airframe Ball, Rollerand Needle Roller Bearings Metric Design R(1994) (Withdrawn) Airframe Ball, Rollerand Needle Roller Bearings Inch Design Nut, Self-Locking, Plate, Fixed, One Lug, Steel, Reduced RivetSpacing, Low Height, CBore, 1100 MPa, Metric, 235 Degrees C Revision 2; FSC5310 Nut, Self-Locking, Plate, Fixed, One Lug, Cres, Reduced RivetSpacing, Low Height, CBore, 900 MPa, Metric, 235 Deg C and 425 Deg C Revision2; FSC 5305 Nut, Self-Locking, Plate, Fixed, Two Lug, Steel, Reduced RivetSpacing, Low Height, CBore, 1100 MPa, Metric, 235 Deg C Revision 2; FSC 5310 Nut, Self-Locking, Plate, Fixed, Two Lug, Cres, Reduced RivetSpacing, Low Height, CBore, 900 MPa, Metric, 235 Deg C, and 425 Deg CRevision 2; FSC 5310 Nut, Self-Locking, Plate, Fixed, Corner, Steel, Reduced RivetSpacing, Low Height, CBore, 1100 MPa, Metric, 235 Deg C Revision 2; FSC 5310 Nut, Self-Locking, Plate, Fixed, Corner, Cres, Reduced RivetSpacing, Low Height, CBore, 900 MPa, Metric 235 Deg C and 425 Deg C Revision2; FSC 5310 Nut, Self-Locking, Plate, Fixed, Side by Side, Steel, ReducedRivet Spacing, Low Height, CBore, 1100 MPa, Metric 235 Deg C Revision 2; FSC5310 Nut, Self-Locking, Plate, Fixed, Side by Side, Cres ReducedRivet Spacing, Low Height, CBore, 900 MPa, Metric 235 Deg C and 425 Deg CRevision 2; FSC 5310 Nut, Self-Locking, Plate, Corner, Steel, Low Height, CBore, 1100MPa, Metric, 235 Deg C, Revision 2; FSC 5310 Nut, Self-Locking, Plate, Corner, Cres, Low Height, CBore, 900MPa, Metric 235 Deg C and 425 Deg C Revision 2; FSC 5310 (Cancelled) Flushness Gage and Stylus for 100 Degree CountersunkFlush Fasteners Cancelled After March 31,2001; Superseded by NAS 9800;Revision 4; FSC GP53 R(1992) (Cancelled) Inspection Procedure for Flush Fasteners CancelledAfter March 31,2001; Superseded by NAS 9800; Revision 4 R(1992) (Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive for Design AfterDecember 31,1976. See NAS 1790 for Descri (Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive for Design AfterDecember 31,1976. See NAS 1790 for Descri

(Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive for Design AfterDecember 31,1976. See NAS 1790 for Descri (Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive for Design AfterDecember 31,1976. See NAS 1790 for Descri (Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive for Design AfterDecember 31,1976. See NAS 1790 for Descri (Inactive for Design) Bolt, 100 Degree Flush Head "Hi-Torque" Recess Titanium Alloy (Long Thread) Inactive for Design AfterDecember 31,1976. See NAS 1790 for Descri (Inactive for Design) Bolt, Flat Pan Head Full Thread Inactivefor Design After December 31,1976. See NAS 1100 and NAS 1216 for Descriptionof Status Notes See NAS 38 (Inactive for Design) Bolt, 100 Degree Flush Tension Head FullThread Inactive for Design After December 31,1976. See NAS 1102 and NAS 1219for Description of Status Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Bolt - Clevis FSC 5306 Stud, Self-Clinching General Specification for FSC 5307 Bolt - Clevis FSC 5306 (Cancelled) Ladders - PortableWood - Safety Requirements Specifications for Mercury LampsSupplement C78.40a- 1998 (Withdrawn) Roadway LightingEquipment - Luminaire Attachments IEEE C136-1994;Revised and Redesignated toDraft IEEE C136.3-1995

(Withdrawn) Roadway LightingEquipment - Locking-Type Photocontrol Devices and Mating Receptacles -Physical and Electrical Interchangeability and Testing Revised and (Withdrawn) Roadway Lighting -Metal Brackets for Wood Poles IEEE C136-1994 Photography (Optics) -Photographic Lenses - Measurement Method for Distribution of IlluminancePIMA; Revision and Redesignation of ANSI PH3.22-1979 (R1992) (Withdrawn) Photography (Films) -Films in Rolls for Recording Instruments and Miscellaneous Uses Dimensions (Withdrawn) Photography (Film) -16mm, 35mm, 70mm, and 105mm Spools for Still-Picture Cameras Dimensions (Withdrawn) Method for MeasuringTemperature of Photographic Equipment *NOT CURRENT DOCUMENT R(1988) (Withdrawn) Photography (Cameras)- Tripod Connections for American Cameras (1/4-Inch-20 Thread) R(1987) (Withdrawn) Focal Length Markingsof Lenses R(1986) (Withdrawn) Photography(Processing) - Black-And-White Films, Plates, and Papers - Manual ProcessingMethods R(1990) (Withdrawn) Information Systems -Unrecorded Helical- Scan Digital Computer Tape Cartridge for InformationInterchange - 3.81 mm (0.150 in) Standard Specification for Steel Castings, Alloy, SpeciallyHeat-Treated, for Pressure-Containing Parts, Suitable for High-TemperatureService R(1998) Standard Specification for Ferritic Ductile Iron Pressure-RetainingCastings for Use at Elevated Temperatures Standard Specification for Wrought Austenitic Stainless SteelPiping Fittings

Standard Specification for Zinc-Coated (Galvanized) Low-CarbonSteel Armor Wire Standard Specification for Carbon Steel Chain Standard Specification for Uncoated Stress-Relieved Steel Wirefor Prestressed Concrete AASHTO No.: M 204

Standard Specification for Steel, Sheet, for Porcelain Enameling Standard Test Method for Weight (Mass) of Coating onAluminum-Coated Iron or Steel Articles Standard Specification for Steel Bars, Alloy, Hot- Wrought orCold-Finished, Quenched and Tempered R(2000) Standard Specification for Austenitic Gray Iron Castings E1-1997R(1997) Standard Specification for Austenitic Ductile Iron CastingsR(1999) Standard Specification for Quenched and Tempered Steel Bolts andStuds Standard Specification for Steel Sheet, Aluminum- Coated, by theHot-Dip Process Standard Specification for Zinc-Coated Steel Wire Strand Standard Specification for Chromium-Nickel Stainless SteelWeaving and Knitting Wire

Standard Specification for Stainless Steel Bars and Shapes forUse in Boilers and Other Pressure Vessels Standard Specification for General Requirements for Flat-RolledStainless and Heat-Resisting Steel Plate, Sheet, and Strip Standard Specification for General Requirements for StainlessSteel Bars, Billets, and Forgings Standard Specification for High Hardenability AntifrictionBearing Steel Standard Specification for Steel Castings Suitable for PressureService R(1998) Standard Practice for Steel Castings, Welding, Qualifications ofProcedures and Personnel Standard Specification for Carbon Steel Lifting Eyes Standard Specification for Heat-Treated Steel Structural Bolts,150 ksi Minimum Tensile Strength AASHTO No.: M 253 Standard Specification for Stainless Steel Wire and Wire Rodsfor Cold Heading and Cold Forging R(2000) Standard Specification for Castings, Nickel and Nickel Alloy Standard Specification for Steel Wire, Deformed, for ConcreteReinforcement E1-2001 Standard Specification for Steel Welded Wire Fabric, Deformed,for Concrete Reinforcement E1-2001 Standard Specification for Steel Bars and Shapes, Carbon Rolledfrom "T" Rails E1-1997 R(1997) (Withdrawn) Standard Specification for Steel Structural RivetsAASHTO No.: M 228 Standard Specification for Alloy and Structural Alloy Steel,Sheet and Strip, Hot-Rolled and Cold-Rolled Standard Specification for Quenched and Tempered Vacuum-TreatedCarbon and Alloy Steel Forgings for Pressure Vessels R(1999) Standard Specification for General Requirements for Wire Rodsand Coarse Round Wire, Carbon Steel Standard Specification for General Requirements for Wire Rodsand Coarse Round Wire, Carbon Steel (Metric) Standard Specification for Seamless Stainless Steel MechanicalTubing Standard Specification for Cold-Drawn Buttweld Carbon SteelMechanical Tubing Standard Specification for Electric-Resistance-Welded Carbon andAlloy Steel Mechanical Tubing Standard Specification for High-Yield-Strength, Quenched andTempered Alloy Steel Plate, Suitable for Welding AASHTO No.: M244 Standard Specification for Pressure Vessel Plates, Alloy Steel,High-Strength, Quenched and Tempered R(1999) Standard Specification for Corrosion-Resistant High- SiliconIron Castings Standard Specification for Seamless Carbon and Alloy SteelMechanical Tubing (Withdrawn) Standard Specification for SupplementaryRequirements for Seamless and Electric-ResistanceWelded Carbon SteelTubular Products for High- Temperature Ser Standard Specification for Abrasion-Resistant Cast Irons E1-1999R(1999)

Standard Specification for Pressure Vessel Plates, Alloy Steel,Quenched and Tempered, ManganeseMolybdenum and Manganese-Molybdenum-NickelR(1999) Standard Specification for Carburizing Steels for Anti- FrictionBearings (Withdrawn) Standard Specification for Special-Quality Ball andRoller Bearing Steel R(1992) Standard Specification for Ductile Iron Castings E1- 1999R(1999) Standard Specification for Pressure Vessel Plates, Heat-Treated,Carbon-Manganese-Silicon Steel R(2000) Standard Specification for General Requirements for StainlessSteel Wire and Wire Rods Standard Practice for Macroetch Testing of Tool Steel BarsR(1999) Standard Specification for Carbon and Alloy Steel Nuts Standard Specification for Carbon and Alloy Steel Nuts (Metric) Standard Specification for Hot-Rolled and Cold- FinishedAge-Hardening Stainless Steel Bars and Shapes Standard Specification for Martensitic Stainless Steel Bars,Forgings, and Forging Stock for High-Temperature Service Standard Specification for Steel, Sheet, Carbon, andHigh-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirementsfor (Discontinued) Standard Specification for Steel, Carbon (0.15Maximum, Percent), Hot-Rolled Sheet and Strip Commercial Standard Specification for Structural Steel, Sheet and Strip,Carbon, Hot-Rolled Standard Specification for Alloy Steel Socket-Head Cap Screws Standard Specification for Steel Bars, Carbon, Merchant Quality,M-Grades Standard Specification for Steel Bars, Carbon, Hot- Wrought,Special Quality R(2000) Standard Specification for Straight-Beam Ultrasonic Examinationof Plain and Clad Steel Plates for Special Applications R(2001) Standard Specification for Stainless Steel Wire Standard Specification for Free-Machining Stainless Steel Wireand Wire Rods R(2000)

Standard Specification for Zinc-Coated Parallel and HelicalSteel Wire Structural Strand and Zinc-Coated Wire for Spun-In-PlaceStructural Strand Standard Specification for Seamless and Welded Carbon SteelWater-Well Pipe Standard Specification for Steel Sheet, ElectrolyticZinc-Coated, for Light Coating Weight (Mass) Applications Standard Specification for Steel Tubes, Low-Carbon, Tapered forStructural Use Standard Specification for Cast Tool Steel R(1999) Standard Specification for Zinc-Coated Steel Structural WireRope

Standard Specification for Steel, Sheet and Strip,High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with ImprovedAtmospheric Corrosion Resistance Standard Specification for Structural Steel (SS), Sheet, Carbon,Cold-Rolled Standard Specification for Drawing Steel (DS), Sheet, Carbon,Cold-Rolled Standard Specification for Drawing Steel (DS), Sheet and Strip,Carbon, Hot-Rolled Standard Specification for Tin Mill Products, GeneralRequirements Standard Specification for Tin Mill Products, GeneralRequirements (Metric) Standard Specification for Tin Mill Products, Electrolytic TinPlate, Single Reduced Standard Specification for Tin Mill Products, Black Plate,Single-Reduced Standard Specification for Tin Mill Products, Electrolytic TinPlate, Double Reduced Standard Specification for Homogeneous Tool-Resisting Steel Barsfor Security Applications Standard Test Methods for Determination of Tin Coating Weightsfor Electrolytic Tin Plate Standard Specification for Normalized High-Strength Low-AlloyStructural Steel Plates

Standard Specification for Steel, Sheet and Strip,Heavy-Thickness Coils, Carbon, Hot-Rolled Standard Specification for Zinc-Coated (Galvanized) Carbon SteelWire Standard Terminology Relating to Iron Castings Standard Specification for Commercial Steel (CS), Sheet andStrip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled Standard Specification for Steel Bars, Carbon, Merchant Quality,Mechanical Properties R(2000) Standard Specification for Annealed or Cold-Worked AusteniticStainless Steel Sheet, Strip, Plate, and Flat Bar Standard Specification for Steel Bars, Carbon, Hot- Wrought,Special Quality, Mechanical Properties R(2000)

Standard Specification for Tool Steels Alloy R(1999) Standard Specification for Steel, Strip, High-Carbon,Cold-Rolled, General Requirements for Standard Specification for Steel, Strip, High-Carbon,Cold-Rolled R(1998) Standard Specification for Tool Steel, Carbon R(1999) (Withdrawn) Standard Specification for High-Strength NonheadedSteel Bolts and Studs

Standard Specification for High-Strength Low-Alloy Steel H-Pilesand Sheet Piling for Use in Marine Environments Standard Specification for Precipitation-Hardening Stainless andHeat-Resisting Steel Plate, Sheet, and Strip R(1999) Standard Specification for Steel Bars, Carbon, Hot- Wrought,Special Quality, for Fluid Power Applications E11995 R(1995) Standard Specification for Steel Bars, Carbon, Hot- Wrought orCold-Finished, Special Quality, for Pressure Piping Components R(2000) Standard Practices for Packaging, Marking, and Loading Methodsfor Steel Products for Domestic Shipment E1- 2000 Standard Specification for Steel Castings, General Requirements,for Pressure-Containing Parts Standard Specification for Steel Forging Stock E1-1997 R(1996) Standard Specification for Steel Bars, Alloy, Hot- Wrought, forElevated Temperature or Pressure- Containing Parts, or Both R(2000) Standard Specification for Hardware Cloth (Woven or Welded GalvanizedSteel Wire Fabric) Standard Specification for Steel Sheet, Metallic Coated andPolymer Precoated for Corrugated Steel Pipe AASHTO No.: M 246/M 246M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel,Corrosion Resistant, for General Application E1-1999 Standard Specification for Castings, Iron-Chromium- Nickel,Corrosion Resistant, for Severe Service Standard Specification for Ductile Iron Gravity Sewer Pipe Standard Specification for Steel, Strip, Carbon andHigh-Strength, Low-Alloy, Hot-Rolled, General Requirements for Standard Test Methods, Practices, and Terminology for ChemicalAnalysis of Steel Products Standard Specification for Steel Castings, Ferritic andMartensitic, for Pressure-Containing and Other Applications, forLow-Temperature Service Standard Specification for Corrugated Steel Pipe,Metallic-Coated for Sewers and Drains AASHTO No.: M 36/M 36M Standard Specification for Corrugated Steel Pipe, PolymerPrecoated for Sewers and Drains AASHTO No. M245/M245M Standard Specification for Zinc-Coated (Galvanized) Steel Barsfor Concrete Reinforcement

Standard Specification for Vacuum-Treated 12 % Chromium AlloySteel Forgings for Turbine Rotors and Shafts Standard Specification for Through-Thickness Tension Testing ofSteel Plates for Special Applications R(2001) Standard Specification for Epoxy-Coated Steel Reinforcing Bars Standard Practice for Repair of Damaged and Uncoated Areas ofHot-Dip Galvanized Coatings

Standard Specification for Steel Sheet, 55% Aluminum- ZincAlloy-Coated by the Hot-Dip Process Standard Specification for Rolled Floor Plate, Stainless Steel Standard Practice for Installing Factory-Made Corrugated SteelPipe for Sewers and Other Applications Standard Specification for Aluminum-Coated (Aluminized) CarbonSteel Wire Standard Specification for Coppered Carbon Steel Wire R(2001) Standard Specification for Alloy Structural Steel Plates Standard Specification for Post-Applied Coatings, Pavings, andLinings for Corrugated Steel Sewer and Drainage Pipe Standard Specification for Steel Wire, Carbon, for General UseR(1998) Standard Specification for High-Silicon Iron Pipe and FittingsE1-1994 Standard Practice for Criteria for Use in Evaluation of TestingLaboratories and Organizations for Examination and Inspection of Steel,Stainless Steel, and Related A Standard Specification for Steel, Sheet and Strip, HeavyThickness Coils, Carbon, Hot-Rolled, Structural Quality Standard Specification for Stainless Steel Needle Tubing R(1998) Standard Specification for Chemical Passivation Treatments forStainless Steel Parts E1-2000 Standard Specification for Electrodeposited Coatings of Zinc onIron and Steel E1-2001 Standard Specification for Medium-Hard-Drawn Copper Wire Standard Specification for High Conductivity Tough- Pitch CopperRefinery Shapes Standard Specification for Concentric-Lay-Stranded CopperConductors, Hard, Medium-Hard, or Soft Standard Specification for Cartridge Brass Sheet, Strip, Plate,Bar, and Disks (Blanks) Standard Specification for Bronze Castings for Bridges andTurntables Standard Specification for Refined Lead R(1997) Standard Specification for Tinned Soft or Annealed Copper Wirefor Electrical Purposes Standard Specification for Seamless Red Brass Pipe, StandardSizes Standard Specification for Copper Rod Drawing Stock forElectrical Purposes E2: October 2000 Standard Test Method for Resistivity of Metallically ConductingResistance and Contact Materials R(2001) Standard Specification for Bronze Castings for Steam LocomotiveWearing Parts Standard Specification for Car and Tender Journal Bearings,Lined Standard Specification for Seamless Copper Tube Standard Specification for Seamless Copper Tube (Metric) Standard Specification for Magnesium-Alloy Sand Castings Standard Specification for Aluminum-Alloy Die Castings Standard Specification for Seamless Copper Water Tube (Metric) Standard Specification for Magnesium-Alloy Sheet and Plate Standard Specification for Magnesium-Alloy Forgings Standard Specification for Copper-Silicon Alloy Plate, Sheet,Strip, and Rolled Bar for General Purposes and Pressure Vessels

Standard Specification for Copper-Silicon Alloy Rod, Bar andShapes Standard Specification for Lead-Coated Copper Sheet and Strip forBuilding Construction Standard Specification for Magnesium-Alloy Extruded Bars, Rods,Shapes, Tubes, and Wire Standard Practice for Operating Salt Spray (Fog) Apparatus Standard Specification for Copper and Copper Alloy Forging Rod,Bar, and Shapes Standard Specification for Brass Wire Standard Method for Measurement of Stain Resistance of AnodicCoatings on Aluminum R(1998) Standard Test Method for Measurement of Coating Mass per UnitArea on Anodically Coated Aluminum R(2000) Standard Specification for Manganese Bronze Rod, Bar and Shapes Standard Specification for Aluminum Bronze Rod, Bar, and ShapesE2-1999 Standard Specification for Aluminum Bronze, Rod, Bar, and Shapes(Metric) (Withdrawn) Standard Specification for Copper Sheet, Strip,Plate, and Rolled Bar (Metric) Replaced by B152 REV A Standard Test Method for Expansion (Pin Test) of Copper andCopper-Alloy Pipe and Tubing E1-1996 R(1996) Standard Test Method for Mercurous Nitrate Test for Copper andCopper Alloys Standard Specification for Nickel Plate, Sheet, and Strip Standard Specification for Seamless Nickel and Nickel AlloyCondenser and Heat-Exchanger Tubes Standard Specification for Nickel-Copper Alloy Rod, Bar, andWire Standard Specification for Oxygen-Free Electrolytic Copper - RefineryShapes Standard Specification for Aluminum Alloys in Ingot and MoltenForms for Castings from All Casting Processes Standard Practice for Preparation of Low-Carbon Steel forElectroplating R(1997) Standard Specification for Lead-Coated and Lead-Alloy- CoatedSoft Copper Wire for Electrical Purposes Standard Test Method for Resistivity of Electrical ConductorMaterials Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip,and Rolled Bar Standard Specification for Magnesium-Alloy Permanent MoldCastings Standard Specification for Electrodeposited Coatings of Lead andLead-Tin Alloys on Steel and Ferrous Alloys R(1999) Standard Specification for Copper-Nickel-Zinc (Nickel Silver)Wire and Copper-Nickel Alloy Wire Standard Specification for Aluminum and Aluminum-Alloy Sheet andPlate Standard Specification for Aluminum and Aluminum-Alloy Drawn SeamlessTubes Standard Specification for Aluminum and Aluminum-Alloy DrawnSeamless Tubes (Metric) Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod,and Wire Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod,and Wire (Metric)

Standard Test Method for Apparent Density of Free- Flowing MetalPowders Using the Hall Flowmeter Funnel R(1995) Standard Test Method for Flow Rate of Metal Powders Standard Test Method for Sieve Analysis of Granular MetalPowders Standard Specification for Aluminum and Aluminum-Alloy ExtrudedBars, Rods, Wire, Profiles, and Tubes Standard Specification for Aluminum and Aluminum-Alloy ExtrudedBars, Rods, Wire, Profiles, and Tubes (Metric) Standard Specification for Hard-Drawn Copper-Clad Steel Wire Standard Specification for Concentric-Lay-Stranded Copper-CladSteel Conductors Standard Specification for Aluminum 1350-H19 Wire for ElectricalPurposes Standard Specification for Concentric-Lay-Stranded Aluminum 1350Conductors Standard Specification for Aluminum Bars for Electrical Purposes(Bus Bars) Standard Specification for Aluminum Bars for Electrical Purposes(Bus Bars) (Metric) Standard Test Method for Measurement of Thickness of AnodicCoatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic BasisMetals with Eddy-Current Ins Standard Specification for Tinned Hard-Drawn andMedium-Hard-Drawn Copper Wire for Electrical Purposes Standard Specification for Aluminum and Aluminum-Alloy DieForgings, Hand Forgings, and Rolled Ring Forgings Standard Specification for General Requirements for WroughtCopper Alloy Wire Standard Specification for General Requirements for WroughtSeamless Copper and Copper-Alloy Tube Standard Specification for General Requirements for WroughtSeamless Copper and Copper-Alloy Tube (Metric) Standard Guide for Preparation of Aluminum Alloys forElectroplating E1-1999 R(1999) Standard Practice for Preparation of and Electroplating on StainlessSteel R(1998) Standard Specification for Standard Nominal Diameters andCross-Sectional Areas of AWG Sizes of Solid Round Wires Used as ElectricalConductors Standard Specification for Titanium and Titanium Alloy Strip, Sheet,and Plate Standard Practice for Codification of Certain Nonferrous Metalsand Alloys, Cast and Wrought Standard Practice for Preparation of Copper and Copper- BaseAlloys for Electroplating and Conversion Coatings R(1995) Standard Specification for Copper and Copper-Alloy Die Forgings(Hot-Pressed) Standard Specification for Silver-Coated Soft or Annealed CopperWire Standard Specification for Free-Cutting Copper Rod, Bar, Wireand Shapes Standard Specification for Threadless Copper Pipe, StandardSizes Standard Specification for Copper Drainage Tube (DWV) Standard Specification for Aluminum-Alloy 6061-T6 StandardStructural Profiles

Test Method for Density Determination for Powder Metallurgy(P/M) Materials Containing Less Than Two Percent Porosity R(1997) Standard Specification for Aluminum and Aluminum-Alloy RoundWelded Tubes Standard Specification for Seamless Copper Alloy Pipe and Tube Standard Specification for Aluminum and Aluminum-Alloy Rivet andCold-Heading Wire and Rods Standard Specification for Aluminum-Alloy Extruded Bar, Rod,Tube, Pipe, and Structural Profiles for Electrical Purposes (Bus Conductor) Standard Guide for Cleaning Metals Prior to Electroplating Standard Test Method for Apparent Density of Metal Powders andCompounds Using the Scott Volumeter Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet,and Strip Standard Specification for Nickel-Molybdenum Alloy Rod Standard Specification for Seamless and Welded Titanium andTitanium Alloy Tubes for Condensers and Heat Exchangers (Withdrawn) Standard Specification for Drawn or RolledNickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical HeatingElements Standard Specification for Aluminum and Aluminum-Alloy SeamlessPipe and Seamless Extruded Tube for Gas and Oil Transmission and DistributionPiping Systems Standard Specification for Titanium and Titanium Alloy Bars andBillets Standard Specification for Nickel-Coated Soft or Annealed CopperWire Standard Specification for Copper and Copper-Alloy SeamlessCondenser and Heat Exchanger Tubes with Integral Fins Standard Specification for Factory-Made Wrought Aluminum andAluminum-Alloy Welding Fittings Standard Specification for Titanium and Titanium Alloy CastingsR(1998) Standard Method for Copper-Accelerated Acetic Acid- Salt Spray(Fog) Testing (CASS Test) Standard Specification for Copper-Nickel Alloy Castings Standard Specification for Copper Sheet and Strip for BuildingConstruction Standard Specification for Copper-Zinc-Silicon Alloy Rod Standard Specification for Aluminum Foil for Capacitors Standard Specification for Concentric-Lay-StrandedAluminum-Alloy 5005-H19 Conductors R(1999) Standard Specification for Magnesium-Alloy Investment Castings Standard Specification for Copper-Nickel-Silicon Alloy Rod andBar Standard Specification for Copper-Aluminum-Silicon- CobaltAlloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy,Copper-Nickel-Aluminum- Magnesiu Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825 andUNS N08221) Plate, Sheet, and Strip Standard Specification for Gear Bronze Alloy Castings Standard Specification for Aluminum-Alloy Extruded StructuralPipe and Tube Standard Test Method for Particle Size Distribution ofRefractory Metal Powders and Related Compounds by Turbidimetry Standard Specification for Welded Copper Tube Standard Specification for Chromates on Aluminum R(1998)

Standard Specification for Copper-Clad Steel Wire for ElectronicApplication E1-1998 R(1998) Standard Specification for Electrodeposited Coatings of CopperPlus Nickel Plus Chromium and Nickel Plus Chromium Standard Specification for UNS N08020, UNS N08026, and UNSN08024 Alloy Plate, Sheet, and Strip Standard Specification for Copper-Iron Alloy Plate, Sheet,Strip, and Rolled Bar Standard Specification for UNS N06030, UNS N06022, UNS N06200,UNS N08020, UNS N08026, UNS N08024, UNS N08926, UNS N08367, UNS N10276, UNSN10665, UNS N10675, and UNS Standard Specification for General Requirements for WroughtPrecious Metal Electrical Contact Materials Standard Specification for Aluminum and Aluminum-Alloy DrawnTubes for General Purpose Applications Standard Test Method for Measurement of Metal and Oxide CoatingThickness by Microscopical Examination of a Cross Section R(1997) Standard Specification for Electrodeposited Coatings of Gold forEngineering Uses Standard Specification for Aluminum and Aluminum-Alloy ExtrudedRound Tubes for General-Purpose Applications Standard Test Method for Measurement of Coating Thicknesses bythe Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals Standard Specification for Silver-Coated, Copper-Clad Steel Wirefor Electronic Application Standard Test Method for Measurement of Thickness of MetallicCoatings by the Coulometric Method R(1997) Standard Specification for Copper Alloy Strip for Flexible MetalHose Standard Specification for Tin-Coated, Copper-Clad Steel Wirefor Electronic Application E1-1998 R(1998) Standard Specification for Gold-Silver-Platinum ElectricalContact Alloy Standard Test Method for Measurement of Coating Thicknesses bythe Magnetic Method: Electrodeposited Nickel Coatings on Magnetic andNonmagnetic Substrates Standard Specification for Palladium Electrical Contact Alloy Standard Specification for Gold Electrical Contact Alloy (Withdrawn) Standard Specification for Welded Copper andCopper-Alloy Heat Exchanger Tube (Metric) Standard Specification for Aluminum and Aluminum-Alloy Formedand Arc-Welded Round Tube Standard Test Methods of Tension Testing Wrought and CastAluminum- and Magnesium-Alloy Products Standard Specification for Palladium-Silver-Copper ElectricalContact Alloy Standard Specification for Nickel Alloy Forgings Standard Specification for Copper-Clad Aluminum Wire E1-1998R(1998) Standard Test Method for Measurement of Coating Thickness by theBeta Backscatter Method Standard Test Method for Measurement of Coating Thickness byX-Ray Spectrometry Standard Test Method for Microhardness of Electroplated CoatingsR(1999) Standard Specification for Electrodeposited Coatings of Tin-LeadAlloy (Solder Plate) R(1999) Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, Low-CarbonNickel-Molybdenum-Chromium- Tantalum, Low-Carbon

Standard Specification for Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-ChromiumMolybdenum, and Low-CarbonNickel-Chromium-Molybdenum- Copper, Low-Carb Standard Specification for Anodic Oxide Coatings on AluminumR(2000) Standard Specification for Copper Alloy Sand Castings forGeneral Applications Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar Standard Test Method for Bending Fatigue Testing forCopper-Alloy Spring Materials Standard Specification for Gold-Copper Alloy Electrical ContactMaterial R(1999) Standard Practice for Heat Treatment of Aluminum Alloys R(1998) Standard Practice for Determining Offset Yield Strength inTension for Copper Alloys Standard Specification for Aluminum 1350 Round Wire, Annealedand Intermediate Tempers, for Electrical Purposes Standard Specification for Coin Silver Electrical Contact Alloy Standard Specification for High-Strength, High- ConductivityCopper-Alloy Wire for Electronic Application Standard Specification for Silver-Copper Eutectic ElectricalContact Alloy Standard Specification for Aluminum-Alloy Rolled Tread Plate Standard Specification for Precipitation-Hardening Nickel AlloyBars, Forgings, and Forging Stock for HighTemperature Service Standard Specification for Welded Copper Tube for AirConditioning and Refrigeration Service Standard Specification for Copper-Beryllium Alloy Seamless Tube Standard Practice for Plane-Strain Fracture Toughness Testing ofAluminum Alloys Standard Practice for Fracture Toughness Testing of AluminumAlloys Standard Specification for Electrodeposited Engineering ChromiumCoatings on Ferrous Substrates (Withdrawn) Standard Guide for Autocatalytic (Electroless)Nickel-Phosphorus Deposition on Metals for Engineering Use Standard Practices for Packaging/Packing of Aluminum andMagnesium Products Standard Practice for Heat Treatment of Magnesium Alloys Standard Practice for Identification Marking of Aluminum andMagnesium Products Standard Specification for Pure Palladium Electrical ContactMaterial Standard Specification for Platinum-Iridium Electrical ContactMaterials Standard Specification for Palladium-Copper Electrical ContactMaterial Standard Specification for Brass, Copper, and Chromium- PlatedPipe Nipples Standard Specification for Electroplated Engineering NickelCoatings Standard Specification for Coatings of Cadmium MechanicallyDeposited Standard Specification for 60% Palladium-40% Silver ElectricalContact Material Standard Specification for Autocatalytic (Electroless) Nickel-PhosphorusCoatings on Metal Standard Specification for Copper-Nickel-Tin Spinodal AlloyStrip Standard Specification for Fine Silver Electrical ContactFabricated Material R(2000) Standard Specification for Corrugated Aluminum Pipe for Sewersand Drains Standard Specification for Copper Alloy Sand Castings for ValveApplication Standard Specification for Electrodeposited Coatings of CadmiumR(1998)

Standard Specification for Copper-Cobalt-Beryllium Alloy andCopper-Nickel-Beryllium Alloy Strip and Sheet Standard Practice for Installing Factory-Made CorrugatedAluminum Culverts and Storm Sewer Pipe Standard Specification for General Requirements for Copper AlloyCastings Standard Specification for Compression Joints for Vitrified ClayPipe and Fittings Standard Specification for Clay Drain Tile and Perforated ClayDrain Tile Standard Specification for Concrete Sewer, Storm Drain, andCulvert Pipe Standard Classification of Fireclay and High-Alumina RefractoryBrick Standard Specification for Gypsum Plasters Standard Test Method for Bulk Density ("Unit Weight")and Voids in Aggregate AASHTO No.: T 19/T19M Standard Practice for Making and Curing Concrete Test Specimensin the Field E1-2001 Standard Specification for Sewer and Manhole Brick (Made fromClay or Shale) AASHTO No.: M91-78; E11999 R(1999) Standard Specification for Structural Clay Load- Bearing WallTile Standard Specification for Inorganic Aggregates for Use inGypsum Plaster Standard Specification for Gypsum Lath Standard Test Method for Organic Impurities in Fine Aggregatesfor Concrete AASHTO No.: T21 Standard Test Method for Obtaining and Testing Drilled Cores andSawed Beams of Concrete AASHTO No.: T24 Standard Specification for Gypsum Casting Plaster and GypsumMolding Plaster Standard Specification for Gypsum Keene's Cement Standard Specification for Gypsum Keene's Cement Standard Test Methods for Sampling and Testing Brick andStructural Clay Tile AASHTO No.: T 32-70 Standard Specification for Calcium Silicate Brick (Sand-LimeBrick) Standard Specification for Reinforced Concrete Culvert, StormDrain, and Sewer Pipe Standard Specification for Reinforced Concrete Culvert, StormDrain, and Sewer Pipe (Metric) Standard Specification for Treated Core and Nontreated CoreGypsum Sheathing Board Standard Test Method for Effect of Organic Impurities in FineAggregate on Strength of Mortar E1-1995 R(1995) Standard Test Method for Soundness of Aggregates by Use ofSodium Sulfate or Magnesium Sulfate Standard Specification for Masonry Cement Standard Specification for Ready-Mixed Concrete E1, E2- 2001 Standard Test Method for Modulus of Rupture of Dimension StoneR(2000)

Standard Test Method for Compressive Strength of HydraulicCement Mortars (Using 2-in. or (50-mm) Cube Specimens) Standard Test Method for Reheat Change of Refractory BrickR(1998) (Withdrawn) Standard Test Method for Compressive Strength ofConcrete Using Portions of Beams Broken in Flexure AASHTO No.: T140 Standard Test Method for Materials Finer Than 75- Micrometers(No. 200) Sieve in Mineral Aggregates by Washing Standard Terminology Relating to Dimension Stone Standard Test Methods of Flexure Testing of Slate (Modulus of Rupture,Modulus of Elasticity) Standard Test Method for Water Absorption of Slate R(1999) Standard Test Method for Lightweight Particles in AggregateAASHTO No.: T113 Standard Terminology Relating to Concrete and ConcreteAggregates E1-2001 Standard Specification for Ceramic Glazed Structural Clay FacingTile, Facing Brick, and Solid Masonry Units Standard Test Methods for Cold Crushing Strength and Modulus ofRupture of Refractories Standard Test Method for Sieve Analysis of Fine and CoarseAggregates Standard Test Method for Density (Unit Weight), Yield, and AirContent (Gravimetric) of Concrete AASHTO No.: T121 Standard Test Method for Clay Lumps and Friable Particles inAggregates AASHTO No.: T112 Standard Test Method for Slump of Hydraulic-Cement Concrete Standard Specification for Aggregate for Masonry Mortar AASHTONo.: M45-70(1974) Standard Test Methods for Polariscopic Examination of GlassContainers Standard Test Method for Water Retention by Concrete CuringMaterials Standard Test Method for Length Change of Hardened Hydraulic-CementMortar and Concrete Standard Specification for Vitrified Clay Filter Blocks Standard Terminology of Glass and Glass Products Standard Test Methods for Thickness and Density of Blanket orBatt Thermal Insulations Standard Test Method for Compressive Strength of Dimension StoneR(1999) Standard Specification for Sheet Materials for Curing Concrete Standard Practice for Sampling Freshly Mixed Concrete Standard Test Method for Air Content of Freshly Mixed Concreteby the Volumetric Method Standard Test Method for Measuring Thickness of ConcreteElements Using Drilled Concrete Cores AASHTO No.: T 148 Standard Practice for Sampling and the Amount of Testing ofHydraulic Cement Standard Test Method for Density of Hydraulic Cement AASHTO No.:T133 Standard Practice for Making and Curing Concrete Test Specimensin the Laboratory Standard Specification for Expanded or Exfoliated VermiculiteThermal Insulating Cement

Standard Specification for Finishing Hydrated Lime R(1997) Standard Test Methods for Cellulosic Fiber Insulating Board Standard Test Method for Fundamental Transverse, Longitudinal,and Torsional Resonant Frequencies of Concrete Specimens E1-1999 Standard Test Methods for Resistance of Glass Containers toChemical Attack R(1999) Standard Test Method for Potential Alkali Reactivity ofCement-Aggregate Combinations (Mortar-Bar Method) Standard Test Method for Steady-State Thermal Performance ofBuilding Assemblies by Means of a Guarded Hot Box E1-1993 R(1993) Standard Test Method for Abrasion Resistance of Stone Subjectedto Foot Traffic E1-1997 R(1997) Standard Specification for Air-Entraining Admixtures forConcrete Standard Test Methods for Chemical Resistance of Mortars,Grouts, and Monolithic Surfacings and Polymer Concretes Standard Specification for Mortar for Unit Masonry Standard Test Method for Shear Properties of Sandwich CoreMaterials E1-2000 Standard Test Method for Acid Resistance of Porcelain Enamels(Citric Acid Spot Test) Standard Terminology Relating to Porcelain Enamel andCeramic-Metal Systems Standard Test Method for Potential Alkali-Silica Reactivity ofAggregates (Chemical Method) Standard Test Method for Flexural Strength of Concrete (UsingSimple Beam with Center-Point Loading) Standard Descriptive Nomenclature for Constituents of ConcreteAggregates Standard Test Method for Flatwise Tensile Strength of SandwichConstructions R(1999) Standard Test Methods for Vitrified Clay Pipe Standard Test Method for Density and Dimensions of PreformedPipe-Covering-Type Thermal Insulation Standard Test Method for Dimensions and Density of PreformedBlock and Board - Type Thermal Insulation Standard Test Method for Tensile Strength of Chemical- ResistantMortar, Grouts, and Monolithic Surfacings Standard Specification for Liquid Membrane-Forming Compounds forCuring Concrete Standard Specification for Clay Flue Linings Standard Specification for Gypsum Concrete Standard Specification for Gypsum Formboard Standard Test Method for Bond Strength of Chemical- ResistantMortars Standard Specification for Lightweight Aggregates for StructuralConcrete Standard Specification for Lightweight Aggregates for InsulatingConcrete Standard Test Method for Steady-State Heat Transfer Propertiesof Horizontal Pipe Insulation Standard Test Method for Softening Point of Glass R(1998) Standard Test Method for Linear Shrinkage of PreformedHigh-Temperature Thermal Insulation Subjected to Soaking Heat E1-1992 R(1997) Standard Specification for Reinforced Concrete Low- HeadPressure Pipe Standard Test Method for Flatwise Compressive Properties ofSandwich Cores Standard Test Methods for Measurement of Thickness of SandwichCores Standard Criteria for Sampling and Acceptance of PreformedThermal Insulation Lots R(2000) Standard Test Method for Flexural Properties of SandwichConstructions

Standard Specification for Chemical-Resistant Resin Mortars Standard Test Method for Time of Setting of Concrete Mixtures byPenetration Resistance Standard Test Method for Hot-Surface Performance ofHigh-Temperature Thermal Insulation Standard Specification for Concrete Drain Tile Standard Specification for Concrete Drain Tile (Metric) Standard Test Method for Absorption of Chemical- ResistantMortars, Grouts, and Monolithic Surfacings, and Polymer Concretes Standard Test Method for Working, Setting, and Service StrengthSetting Times of Chemically Setting Chemical- Resistant Silicate and SilicaMortars Standard Test Method for Abrasion Resistance of Concrete bySandblasting Standard Test Method for Linear Drying Shrinkage of ConcreteMasonry Units Standard Specification for Joints for Circular Concrete Sewerand Culvert Pipe, Using Rubber Gaskets Standard Specification for Joints for Circular Concrete Sewerand Culvert Pipe, Using Rubber Gaskets (Metric) Standard Specification for Perforated Concrete Pipe (Metric) Standard Specification for Molds for Forming Concrete TestCylinders Vertically Standard Test Methods for Physical Testing of Gypsum, GypsumPlasters and Gypsum Concrete Standard Specification for Precast Reinforced Concrete ManholeSections Standard Specification for Precast Reinforced Concrete ManholeSections (Metric) Standard Test Method for Laboratory Aging of SandwichConstructions Standard Specification for Chemical Admixtures for ConcreteE1-2001

Standard Test Method for Compressive Strength of LightweightInsulating Concrete Standard Test Method for Splitting Tensile Strength ofCylindrical Concrete Specimens Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile(Metric) Standard Test Method for Facial Dimensions and Thickness ofFlat, Rectangular Ceramic Wall and Floor Tile R(1999) Standard Specification for Reinforced Concrete Arch Culvert,Storm Drain, and Sewer Pipe Standard Specification for Reinforced Concrete Arch Culvert,Storm Drain, and Sewer Pipe (Metric) Standard Specification for Reinforced Concrete EllipticalCulvert, Storm Drain, and Sewer Pipe Standard Specification for Elastomeric Cellular Preformed Gasketand Sealing Material Standard Test Method for Obtaining and Testing Specimens ofHardened Lightweight Insulating Concrete for Compressive Strength R(1995) Standard Specification for Nails for the Application of GypsumBoard Standard Specification for Vermiculite Loose Fill ThermalInsulation E1-1996 R(1996)

Standard Test Method for Steady-State Thermal TransmissionProperties by Means of the Heat Flow Meter Apparatus Standard Test Methods for Density of Granular Loose FillInsulations Standard Specification for Preformed Flexible ElastomericCellular Thermal Insulation in Sheet and Tubular Form Standard Specification for Lock-Strip Gaskets R(1999) Standard Specification for Perlite Loose Fill Insulation E1-1995R(1995) Standard Test Method for Measuring Trueness and Squareness ofRigid Block and Board Thermal Insulation Standard Specification for Cellular Glass Thermal Insulation Standard Specification for Adhesives for Fastening GypsumWallboard to Wood Framing Standard Test Method for Ash in a Graphite Sample R(2000) Standard Test Method for Moisture in a Graphite Sample R(2000) Standard Specification for Rubber Gaskets for Cast Iron SoilPipe and Fittings Standard Test Method for Total Evaporable Moisture Content ofAggregate by Drying Standard Test Method for Determining Density of StructuralLightweight Concrete Standard Specification for Limestone Dimension Stone Standard Specification for Oil- and Resin-Base Caulking Compoundfor Building Construction Standard Test Method for Flexural Strength and Modulus ofElasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, andPolymer Concretes Standard Practice for Determining Chemical Resistance ofThermosetting Resins Used in Glass-FiberReinforced Structures Intended forLiquid Service Standard Specification for Contact-Molded ReinforcedThermosetting Plastic (RTP) Laminates for CorrosionResistant Equipment Standard Test Method for Potential Alkali Reactivity ofCarbonate Rocks for Concrete Aggregates (Rock Cylinder Method) Standard Specification for Gypsum Veneer Plaster Standard Specification for Gypsum Base for Veneer Plasters Standard Specification for Unfaced Preformed Rigid CellularPolyisocyanurate Thermal Insulation Standard Test Method for Pulse Velocity Through Concrete Standard Specification for Molded Expanded Perlite Block andPipe Thermal Insulation Standard Test Method for Constituent Content of CompositePrepreg by Soxhlet Extraction Standard Specification for Quartz-Based Dimension Stone Standard Practice for Capping Cylindrical Concrete Specimens Standard Specification for Water-Resistant Gypsum Backing Board Standard Test Method for Adhesion or Cohesive Strength ofThermal Spray Coatings Standard Specification for the Manufacture, Performance, andTesting of Metal Suspension Systems for Acoustical Tile and Lay-In PanelCeilings Standard Practice for Installation of Metal Ceiling SuspensionSystems for Acoustical Tile and Lay-In Panels Standard Specification for S Aggregates for Radiation- ShieldingConcrete Standard Descriptive Nomenclature of Constituents of Aggregatesfor Radiation-Shielding Concrete R(1997)

Standard Test Method for Rheological (Flow) Properties ofElastomeric Sealants Standard Test Method for Staining Materials in LightweightConcrete Aggregates E1 Standard Test Method for Flexural Strength of ManufacturedCarbon and Graphite Articles Using Four- Point Loading at Room TemperatureR(2000) Standard Specification for Porous Concrete Pipe (Metric) Standard Specification for Reinforced Concrete D-Load Culvert,Storm Drain, and Sewer Pipe Standard Specification for Reinforced Concrete D-Load Culvert,Storm Drain, and Sewer Pipe (Metric) Standard Specification for Chemical-Resistant Resin Grouts forBrick or Tile Standard Test Method for Indentation Hardness ofElastomeric-Type Sealants by Means of a Durometer Standard Specification for Asbestos-Cement Storm Drain Pipe Standard Specification for Mineral-Fiber Blanket ThermalInsulation for Light Frame Construction and Manufactured Housing Standard Test Method for Resistance of Concrete to RapidFreezing and Thawing Standard Specification for Glazing Compounds for Back Beddingand Face Glazing of Metal Sash Standard Practice for Preparing Precision and Bias Statementsfor Test Methods for Construction Materials Standard Test Method for Tack-Free Time of Elastomeric SealantsE1-1997 R(1997) Standard Test Method for Compressive Strength of Carbon andGraphite R(2000) Standard Specification for Vitrified Clay Pipe, Extra Strength,Standard Strength, and Perforated Standard Practice for Reducing Samples of Aggregate to TestingSize AASHTO T248 Standard Test Method for Average Particle Size of Alumina andSilica Powders by Air Permeability E1-1997 R(1997) Standard Specification for Semidense Mineral Fiber SidingR(1998) Standard Test Method for Aging Effects of Artificial Weatheringon Latex Sealants Standard Specification for Cellulosic Fiber (Wood- Base)Loose-Fill Thermal Insulation Standard Specification for Mineral Fiber Loose-Fill ThermalInsulation Standard Specification for Standard Sand Standard Test Method for Preconstruction and ConstructionEvaluation of Mortars for Plain and Reinforced Unit Masonry Standard Test Method for Effects of Heat Aging on Weight Loss,Cracking, and Chalking of Elastomeric Sealants R(1998) Standard Test Method for Effects of Accelerated Weathering onElastomeric Joint Sealants E1-1997 R(1997) Standard Test Method for Adhesion-In-Peel of Elastomeric JointSealants Standard Test Method for Foaming Agents for Use in ProducingCellular Concrete Using Preformed Foam Standard Specification for Glass Fiber Blanket Insulation(Aircraft Type) Standard Test Method for Rebound Number of Hardened Concrete Standard Practice for Surface Preparation of Concrete forApplication of Chemical-Resistant Resin Monolithic Surfacings Standard Test Method for Sulfur in Graphite byCombustion-Iodometric Titration Method E1-1998 R(1998) Standard Terminology Relating to Concrete Pipe and RelatedProducts E1-1999 Standard Practice for Examination and Sampling of HardenedConcrete in Constructions Standard Specification for Application and Finishing of GypsumBoard

Standard Specification for Installation of Interior Lathing andFurring Standard Specification for Application of Gypsum Veneer Plaster Standard Specification for Application of Gypsum Base to ReceiveGypsum Veneer Plaster Standard Specification for Metal Lath R(2000) Standard Specification for Dense Elastomeric Compression SealGaskets, Setting Blocks, and Spacers Standard Practice for Firing Refractory Concrete SpecimensR(1995) Standard Test Method for Compressive Strength of ConcreteCylinders Cast in Place in Cylindrical Molds (Withdrawn) Standard Test Method for Effective Shrinkage ofEpoxy-Resin Systems Used with Concrete Withdrawn October 1997 Standard Test Method for Thermal Compatibility between Concreteand an Epoxy-Resin Overlay Standard Specification for Precast Concrete Water and WastewaterStructures Standard Specification for Adhesives for Duct Thermal InsulationE1-1996 R(1996) Standard Practice for Determining the Properties of JacketingMaterials for Thermal Insulation R(1996) Standard Specification for Resilient Connectors betweenReinforced Concrete Manhole Structures, Pipes, and Laterals Standard Classification of Potential Health and Safety ConcernsAssociated with Thermal Insulation Materials and Accessories Standard Specification for Exterior Gypsum Soffit Board Standard Specification for Surface-Applied Bonding Compounds forExterior Plastering Standard Specification for Grout Fluidifier forPreplaced-Aggregate Concrete Standard Test Method for Flow of Grout for Preplaced- AggregateConcrete (Flow Cone Method) Standard Test Method for Compressive Strength of Grouts forPreplaced-Aggregate Concrete in the Laboratory Standard Specification for Steel Drill Screws for theApplication of Gypsum Panel Products or Metal Plaster Bases to Steel StudsFrom 0.033 in. (0.84 mm) to 0.112 in. Standard Guide for Lock-Strip Gasket Glazing R(1997) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe Standard Specification for Quicklime and Hydrated Lime for SoilStabilization (Withdrawn) Standard Specification for Perlite Board and RigidCellular Polyisocyanurate Composite Roof Insulation Replaced by C1289 Standard Specification for Ground Granulated Blast- Furnace Slagfor Use in Concrete and Mortars Standard Test Method for Time of Flow of Fiber- ReinforcedConcrete Through Inverted Slump Cone Standard Specification for Steel Self-Piercing Tapping Screwsfor the Application of Gypsum Panel Products or Metal Plaster Bases to WoodStuds or Steel Studs Standard Practice for Installation of Cellulosic and MineralFiber Loose-Fill Thermal Insulation Standard Test Method for Flexural Toughness and First- CrackStrength of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading) Standard Specification for Spray-Applied Rigid CellularPolyurethane Thermal Insulation Standard Specification for Flat Glass R(1997) Standard Specification for Accessories for Gypsum Wallboard andGypsum Veneer Base

Standard Specification for Heat-Treated Flat Glass - Kind HS,Kind FT Coated and Uncoated Glass Standard Specification for Installation of Lathing and Furringto Receive Interior and Exterior Portland CementBased Plaster Standard Test Method for Temperature of Freshly Mixed PortlandCement Concrete (Withdrawn) Standard Specification for Butyl Rubber- BasedSolvent-Release Sealants Withdrawn December 1997 and Replaced by C1311; IHSNotified 11/1998; *NOT CURRENT Standard Specification for Packaged Dry, Hydraulic- Cement Grout(Nonshrink) Standard Specification for Fiber-Reinforced Concrete andShotcrete Standard Specification for Faced Rigid Cellular PolyisocyanurateThermal Insulation Board Standard Practices for Evaluating the Resistance of Plastics toChemical Reagents R(2001) Standard Practice for Specifying Color by the Munsell System Standard Test Method for Breaking Strength of Yarn in Skein FormR(2000) Standard Test Method for Longitudinal Tensile Properties of"Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe andTube Standard Classification for Machine-Made "Fiberglass"(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Standard Practice for Obtaining Hydrostatic or Pressure DesignBasis for "Fiberglass" (Glass-FiberReinforcedThermosetting-Resin) Pipe and Fittings Standard Specification for Filament-Wound "Fiberglass"(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Standard Specification for Centrifugally Cast"Fiberglass" (Glass-Fiber-Reinforced Thermosetting- Resin) Pipe Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Standard Test Method for Bitumen Content R(1998) Standard Test Method for Penetration of Bituminous Materials Standard Test Method for Loss on Heating of Oil and AsphalticCompounds E1; AASHTO No.: T 47 R(2000) Standard Specification for Raw Tung Oil R(1998) Standard Specification for Spirits of Turpentine Standard Terminology for Paint, Related Coatings, Materials, andApplications Standard Test Method for Distillation of Road Tars Standard Test Methods for Sampling and Testing Lac Resins Standard Guide for Chemical Analysis of White Pigments R(1999) Standard Test Method for Softening Point of Bitumen(Ring-and-Ball Apparatus) E1-2000 R(2000) Standard Specification for Asphalt Primer Used in Roofing,Dampproofing,and Waterproofing E-1; AASHTO No.: M116 R(2000) Standard Specification for Coal Tar Primer Used in Roofing,Dampproofing,and Waterproofing 2AASHTO No.: M121 Standard Test Methods for Chemical Analysis of Yellow, Orange,Red, and Brown Pigments Containing Iron and Manganese R(1999) Standard Test Method for Relative Density of Solid Pitch andAsphalt (Displacement Method) R(1999) Standard Practice for Sampling Aggregates AASHTO No. T2 Standard Specification for Zinc Oxide Pigments AASHTO No.: M124R(1999)

Standard Test Method for Distillation of Petroleum Products atAtmospheric Pressure Standard Test Method for Precipitation Number of LubricatingOils Standard Test Method for Flash and Fire Points by Cleveland OpenCup IP Designation: 36/84 (89); AASHTO No.: T48; DIN 51 376 Standard Test Methods for Flash-Point by Pensky- Martens ClosedCup Tester IP Designation: D34/99 Standard Test Method for Water in Petroleum Products andBituminous Materials by Distillation AASHTO No. T55; API Designation: MPMSChapter 10.5; IP Designation: 74/8 Standard Test Method for Pour Point of Petroleum Products IPDesignation: 15/95 Standard Test Method for Ductility of Bituminous MaterialsAASHTO No.: T51 Standard Test Methods for Vitrified Ceramic Materials forElectrical Applications R(1999) Standard Guide for Sampling, Test Methods, Specifications, andGuide for Electrical Insulating Oils of Petroleum Origin Standard Terminology Relating to Textiles Standard Test Methods for Analysis of Yellow, Orange, and GreenPigments Containing Lead Chromate and Chromium Oxide Green R(1997) Standard Test Method for Drop Melting Point of Petroleum WaxIncluding Petrolatum IP Designation: 133/79(87); TAPPI T 634ts-64 R(1999) Standard Test Methods for Analysis of Lubricating Grease Standard Test Method for Sulfur in Petroleum Products (GeneralBomb Method) British Standard 4454; IP Designation: 61/99 Standard Test Method for Detection of Copper Corrosion fromPetroleum Products by the Copper Strip Tarnish Test IP Designation: 154/93;British Standard 4351; E1- 200 Standard Test Method for Dielectric Breakdown Voltage andDielectric Strength of Solid Electrical Insulating Materials at CommercialPower Frequencies Standard Test Methods for AC Loss Characteristics and Permittivity(Dielectric Constant) of Solid Electrical Insulation Standard Test Methods for Specific Gravity of Pigments E1-1996R(1996) Standard Specification for Bitumen-Saturated Cotton Fabrics Usedin Roofing and Waterproofing Standard Specification for Rubber Insulating Matting Standard Test Methods for Coarse Particles in Pigments, Pastes,and Paints R(1999) Standard Test Method for Burning Quality of Kerosine R(1999) Standard Test Method for Conradson Carbon Residue of PetroleumProducts IP Designation: 13/94; British Standard 4380 Standard Test Methods for Sewing Threads Standard Specification for Lampblack Pigment E1-1996 R(1996) Standard Test Methods for Cone Penetration of Lubricating GreaseIP Designation: 50/88 Standard Specification for Smooth-Surfaced Asphalt Roll Roofing(Organic Felt) R(1996) Standard Specification for Asphalt Shingles (Organic Felt)Surfaced with Mineral Granules

Standard Specification for Coal-Tar-Saturated Organic Felt Usedin Roofing and Waterproofing Standard Test Methods for Rigid Sheet and Plate Materials Usedfor Electrical Insulation Standard Test Methods of Sampling and Testing Turpentine Standard Specification for Asphalt Roll Roofing (Organic Felt)Surfaced with Mineral Granules R(1996) Standard Specification for Boiled Linseed Oil E1-1995 R(1995) Standard Specification for Iron Blue Pigment R(1999) Standard Guide for Sampling and Testing Volatile Solvents andChemical Intermediates for Use in Paint and Related Coatings and Material Standard Test Methods for Identification of Fibers in Textiles Standard Test Methods for Hygroscopic Moisture (and Other MatterVolatile under the Test Conditions) in Pigments Standard Test Method for Oil Absorption of Pigments by SpatulaRub-Out Standard Test Method for Solvent-Extractable Material in BlackPigments R(1999) Standard Specification for Asphalt Used in Roofing Standard Test Method for Gasoline Diluent in Used Gasoline EngineOils by Distillation IP Designation: 23/83 (92) Standard Specification for Acetone Standard Specification for 2-Butoxyethanol R(1997) Standard Specification for 2-Ethoxyethanol R(1999) Standard Test Methods for Rigid Tubes Used for ElectricalInsulation Standard Test Methods for Flexible Treated Sleeving Used forElectrical Insulation Standard Classification for Natural Muscovite Block Mica andThins Based on Visual Quality Standard Specification for Wood to Be Used as Panels inWeathering Tests of Coatings Standard Test Method for Specific Gravity of Creosote Fractionsand Residue AASHTO No. T 74; E1-1995 R(1995) Standard Specification for Asphalt Roll Roofing (Organic Felt)Surfaced with Mineral Granules; Wide Selvage R(1996) Standard Test Methods for Thickness of Solid ElectricalInsulation Standard Test Methods for Rubber Hose R(2000) Standard Test Method for Gum Content in Fuels by Jet EvaporationIP Designation: 131/99 Standard Test Method for Color and Strength of ChromaticPigments with a Mechanical Muller Standard Specification for Coal-Tar Creosote for thePreservative Treatment of Piles, Poles, and Timbers for Marine, Land, andFreshwater Use R(1999) Standard Test Methods for Rubber Property - Compression Set Standard Test Method for Grindability of Coal by theHardgrove-Machine Method E2-2000 Standard Test Methods for Vulcanized Rubber and ThermoplasticElastomers - Tension Standard Test Methods for Rubber Property - Adhesion to FlexibleSubstrate (Withdrawn) Standard Test Methods for Testing Pile Yarn FloorCovering Construction Standard Test Method for Particle-Size Analysis of Soils R(1998) Standard Test Methods for Rubber Deterioration - Dynamic FatigueR(2000) Standard Test Methods for Chemical Analysis of Zinc YellowPigment (Zinc Chromate Yellow) R(1999)

Standard Specification for Asphalt Used in Dampproofing andWaterproofing E1 R(1999) Standard Test Method for Tar Acids in Creosote-Coal TarSolutions E1-2000 R(2000) Standard Test Method for Rubber Deterioration by Heat and AirPressure Standard Specification for Caustic Soda (Anhydrous) R(1997) Standard Test Methods for Sampling and Chemical Analysis ofSoaps and Soap Products R(1997) Standard Test Methods for Felt Standard Test Method for Sediment in Crude Oils and Fuel Oils bythe Extraction Method API Designation: Chapter 10-1 (MPMS); BSI 4382; IPDesignation: 53/82; E1-1995; Standard Classification for Dry Pigmentary Titanium DioxideProducts Standard Test Method for Ash from Petroleum Products IPDesignation: 4/96; British Standard 4450 (Withdrawn) Standard Test Method for Acetone Extraction ofPhenolic Molded or Laminated Products Withdrawn March 1998; IHS Notified08/1999; *NOT CURRENT DOCUMENT (Withdrawn) Standard Specification for Chip Soap R(1995) (Withdrawn) Standard Specification for Powdered Soap(Nonalkaline Soap Powder) R(1995) Standard Test Methods for Calcium and Magnesium in Water R(1998) Standard Test Methods for Chloride Ion in Water R(1999) (Discontinued) Standard Test Methods for Phosphorus in WaterDiscontinued February 1997; IHS Notified 06/1999; *NOT CURRENT DOCUMENT Standard Specification for Asphalt Plank Standard Test Method for Rubber Deterioration - Surface Cracking Standard Specification for Zinc Dust Pigment Standard Test Methods for Mandrel Bend Test of Attached OrganicCoatings R(2001) Standard Test Method for Specular Gloss R(1999) Standard Test Method for Ramsbottom Carbon Residue of PetroleumProducts IP Designation: 14/94; British Standard 4451 Standard Test Method for Enclosed Carbon-Arc Exposures ofBituminous Materials (Discontinued) Standard Specification for Single Jute YarnE1-1988; Discontinued 1996; IHS Notified 12/1998 Standard Test Methods for Preformed Expansion Joint Fillers forConcrete Construction (Nonextruding and Resilient Types) Standard Test Method for Sieve Analysis of Mineral Filler forRoad and Paving Materials AASHTO No.: T 37; E1-1999 Standard Guide for Testing Drying Oils R(1998) Standard Test Methods for Wetting and Drying CompactedSoil-Cement Mixtures Standard Test Method for Phthalic Anhydride Content of AlkydResins and Resin Solutions E1-1996 R(1996) Standard Test Method for Carbonizable Substances in WhiteMineral Oil Standard Test Method for Dropping Point of Lubricating Grease IPDesignation: 132/97 Standard Test Method for Rubber - Deterioration in an Air Oven Standard Test Methods for Rubber Properties in CompressionR(2001) Standard Specification for Glass Fiber Strands Standard Specification for Greige Woven Glass Fabrics

Standard Specification for Tetrasodium Pyrophosphate (Anhydrous)R(1997) Standard Specification for Wet Ground Mica Pigments R(1999) Standard Practice for Preparation of Cold-Rolled Steel Panelsfor Testing Paint, Varnish, Conversion Coatings, and Related Coating Products Standard Test Method for Evaluating Degree of Rusting on PaintedSteel Surfaces SSPC-VIS-2 Standard Test Method for Carbonizable Substances in Paraffin WaxR(1999) Standard Test Method for Punching Quality of Phenolic LaminatedSheets R(1998) (Withdrawn) Standard Test Methods for Deformation of PlasticsUnder Load E1-1988; Discontinued 1994 R(1988) Standard Test Methods for Rubber Hose for Automotive Air andVacuum Brake System Standard Test Methods for Quantitative Analysis of Textiles Standard Volume Correction Table for Road Tar Standard Test Method for Rate of Burning and/or Extent and Timeof Burning of Plastics in a Horizontal Position (Withdrawn) Standard Test Method for Surface Irregularities ofFlat Transparent Plastic Sheets Standard Test Method for Tensile Properties of Plastics (Metric) Standard Test Method for Determining Compressive Resistance ofShipping Containers, Components, and Unit Loads Standard Test Method for Moisture Content of Paper andPaperboard by Oven Drying Standard Test Method for Grammage of Paper and Paperboard (Massper Unit Area) TAPPI T 410 om-88 (Withdrawn) Standard Practice for Design of Molds for TestSpecimens of Plastic Molding Materials *NOT CURRENT DOCUMENT Standard Test Method for Rust-Preventing Characteristics ofInhibited Mineral Oil in the Presence of Water IP Designation: 135/93 Standard Test Method for Flexural Fatigue of Plastics byConstant-Amplitude-Of-Force (Discontinued) Standard Test Method for Mar Resistance ofPlastics E1-1995; Discontinued 1998; IHS Notified 08/1999; *NOT CURRENTDOCUMENT Standard Practice for Conditioning Paper and Paper Products forTesting TAPPI T 402 R(1998) Standard Test Method for Internal Tearing Resistance of Paper Standard Specification for Coarse Aggregate for BituminousPaving Mixtures Standard Specification for Crushed Aggregate for MacadamPavements Standard Test Method for Compressive Properties of RigidPlastics (Withdrawn) Standard Test Method for Compressive Properties ofRigid Plastics (Metric) Standard Test Method for Coefficient of Linear Thermal Expansionof Plastics between -30 Degrees C and 30 Degrees C with Vitreous SilicaDilatometer Standard Test Methods for Laboratory Compaction Characteristicsof Soil Using Standard Effort (12,400 ftlbf/ft3 (600 kN-m/m3)) Standard Specification for Melamine-Formaldehyde Molding Compounds Standard Specification for Cellulose Acetate Molding andExtrusion Compounds Standard Specification for Cellulose Acetate Butyrate Moldingand Extrusion Compounds Standard Specification for Laminated Thermosetting Materials

Standard Specification for Vulcanized Fibre Sheets, Rods, andTubes Used for Electrical Insulation Standard Test Method for No-Pick-Up Time of Traffic PaintR(1998) Standard Test Method for Evaluating Degree of Blistering ofPaints R(2000) Standard Test Method for Free-Swelling Index of Coal R(1999) Standard Test Method for Surface Wettability of Paper(Angle-Of-Contact Method) Standard Test Method for Resistance of Nonporous Paper toPassage of Air R(1999) (Withdrawn) Standard Specification for Vinylidene ChlorideMolding Compounds Standard Test Method for Shear Strength of Plastics by PunchTool Standard Specification for Methyl Ethyl Ketone R(2001) Standard Test Method for Brittleness Temperature of Plastics andElastomers by Impact Standard Test Method for Apparent Bending Modulus of Plastics byMeans of a Cantilever Beam Standard Test Methods for Coated Fabrics (Discontinued) Standard Practice for Determination of Weight andShape Changes of Plastics under Accelerated Service Conditions Discontinued1998; IHS Notified 08/199 Standard Test Method for Bursting Strength of Paper Standard Test Method for Water Resistance of Paper, Paperboard,and Other Sheet Materials by the Dry Indicator Method R(1998) (Discontinued) Standard Test Method for Shipping Containers inRevolving Hexagonal Drum E1-1993 R(1993) Standard Test Method for Rockwell Hardness of Plastics andElectrical Insulating Materials Standard Classification System for Poly(Methyl Methacrylate)(PMMA) Molding and Extrusion Compounds (Withdrawn) Standard Test Methods for Flexural Properties ofUnreinforced and Reinforced Plastics and Electrical Insulating Materials(Metric) (Withdrawn) Standard Test Methods for Rubber Property - Young'sModulus at Normal and Subnormal Temperatures *NOT CURRENT DOCUMENT R(1989) Standard Test Method for Chlorine in New and Used PetroleumProducts (Bomb Method) Standard Practices for Producing Films of Uniform Thickness ofPaint, Varnish, and Related Products on Test Panels R(2001) Standard Test Method for Tensile Properties of Paper andPaperboard Using Constant-Rate-Of-Elongation Apparatus Standard Practice for Rubber Conditioning for Low- TemperatureTesting R(1997) Standard Test Method for Hydrogen Sulfide and Sulfur DioxideContent (Qualitative) of Industrial Aromatic Hydrocarbons R(2001) Standard Test Methods for Specific Gravity of Soil Solids byWater Pycnometer Standard Test Methods for Manganese in Water Standard Test Method for Silica in Water Standard Test Method for Rubber - Deterioration by Heating inAir (Test Tube Enclosure) Standard Test Method for Evaluating Degree of Settling of PaintR(1998) Standard Test Methods of Testing Cellulose Acetate Standard Test Method for Oxidation Stability of Aviation Fuels(Potential Residue Method) IP Designation: 138/99; British Standard 4456 Standard Test Method for Sulfated Ash from Lubricating Oils andAdditives IP Designation: 163/96; British Standards 4716

Standard Test Methods for Nonrigid Vinyl Chloride Polymer TubingUsed for Electrical Insulation Standard Test Method for Inorganic Chlorides and Sulfates inInsulating Oils Standard Terminology Relating to Plastics Standard Test Methods for Dissolved Oxygen in Water R(1996) Standard Test Methods for Specific Gravity, Apparent, of LiquidIndustrial Chemicals R(2000) Standard Test Method for Insolubles in Used Lubricating Oils (Discontinued) Standard Test Method for Water Vapor Permeabilityof Packages Standard Test Method for Resistance of Adhesive Bonds toChemical Reagents Standard Practice for Applied Weight per Unit Area of LiquidAdhesive Standard Test Method for Strength Properties of Adhesive Bondsin Shear by Compression Loading Standard Test Method for Strength Properties of Adhesives inPlywood Type Construction in Shear by Tension Loading Standard Test Method for Dissipation Factor (or Power Factor)and Relative Permittivity (Dielectric Constant) of Electrical InsulatingLiquids E1-1999 Standard Test Method for Rubber Property - Plasticity andRecovery (Parallel Plate Method) Standard Specification for Borax R(1997) Standard Test Method for Congealing Point of Petroleum Waxes,Including Petrolatum IP Designation: 76/95; British Standard 5088 R(1998) Standard Test Method for Oxidation Stability of LubricatingGreases by the Oxygen Bomb Method IP Designation: 142/85 (92); E1-1995R(1995) Standard Test Method for Oxidation Characteristics of InhibitedMineral Oils British Standard 4388 Standard Test Methods for Rubber Properties in Compression orShear (Mechanical Oscillograph) R(1997) Standard Specification for Penetration-Graded Asphalt Cement forUse in Pavement Construction R(1999) Standard Test Method for Impact Strength of Adhesive Bonds Standard Test Method for Water Resistance of Shipping Containersby Spray Method Standard Test Method for Bearing Strength of Plastics Standard Test Methods for Abrasion Resistance of OrganicCoatings by Falling Abrasive R(2001) Standard Test Method for Laboratory Determination of Degree ofBleeding of Traffic Paint R(1998) Standard Test Method for Interfacial Tension of Oil AgainstWater by the Ring Method Standard Test Methods for Calculated Cetane Index of DistillateFuels IP Designation: 364/84; E1-2000 R(2000) Standard Specification for Emulsified Asphalt Standard Practice for Sampling Bituminous Paving Mixtures Standard Test Method for Rubber Property - Volume Resistivity ofElectrically Conductive and Antistatic Products E1-2000 R(2000) Standard Specification for Mixing Plants for Hot- Mixed,Hot-Laid Bituminous Paving Mixtures Standard Terminology of Packaging and Distribution Environments Standard Test Method for Pressure-Sensitive Adhesive- CoatedTapes Used for Electrical and Electronic Applications Standard Test Method for Apparent Shear Strength ofSingle-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading(Metal-To-Metal)

Standard Test Method for Haze and Luminous Transmittance ofTransparent Plastics Standard Test Method for Initial Tear Resistance of Plastic Filmand Sheeting Standard Test Method for Measurement of Dry-Film Thickness ofOrganic Coatings Using Micrometers R(2001) Standard Practice for Conducting Exterior Exposure Tests ofPaints on Wood Standard Test Method for Determining Total Nitrogen in Resinsand Plastics R(1998) Standard Practice for Conducting Exterior Exposure Tests ofPaints on Steel Standard Test Method for Hydrogen in Petroleum Fractions Standard Test Method for Fiber Analysis of Paper and PaperboardTAPPI T 401 om-88 R(1999) Standard Test Method for Stiffness Properties of Plastics as aFunction of Temperature by Means of a Torsion Test Standard Test Method for Resistance of Transparent Plastics toSurface Abrasion Standard Specification for Poly(Vinyl Chloride) Jacket for Wireand Cable Standard Specification for Rubber Insulating Blankets Standard Specification for Rubber Insulating Covers Standard Specification for Rubber Insulating Line Hose R(1999) Standard Test Method for Measuring Rubber Deterioration - CutGrowth Using Ross Flexing Apparatus E11999 R(1999) Standard Test Methods for Rubber Property - Stiffening at LowTemperatures: Flexible Polymers and Coated Fabrics R(1997) Standard Test Method for Rubber Property - Resilience Using aRebound Pendulum R(2000) Standard Specifications for Flexible Cellular Materials - LatexFoam Standard Specification for Flexible Cellular Materials - Spongeor Expanded Rubber Standard Test Method for Yarn Number Based on Short- LengthSpecimens Standard Test Methods for Acidity or Alkalinity of Water R(1996) Standard Test Methods for Iron in Water Standard Specification for Rubber - Concentrated, AmmoniaPreserved, Creamed, and Centrifuged Natural Latex Standard Test Method for Distillation Range of Volatile OrganicLiquids IP Designation: 195/98 (Withdrawn) Standard Practice for Gaging Petroleum and PetroleumProducts API Std 2545; Available as Separate Reprint Only R(1990) Standard Test Methods for Evaluating Nonwoven Fabrics Standard Test Method for Boiling Point of Engine CoolantsR(1998) Standard Test Method for Reserve Alkalinity of Engine Coolantsand Antirusts Standard Test Method for Density or Relative Density of EngineCoolant Concentrates and Engine Coolants by the Hydrometer Standard Test Methods for Water in Engine Coolant Concentrate bythe Karl Fischer Reagent Method Standard Test Methods for Electrical Conductivity andResistivity of Water R(1999) Standard Test Method for Hardness in Water Standard Test Method for Kauri-Butanol Value of HydrocarbonSolvents R(2001) Standard Test Methods for Chemical Analysis of Blue PigmentsR(1999) Standard Specification for Aggregate for Single or MultipleBituminous Surface Treatments Standard Test Methods for Amount of Material in Soils Finer Thanthe No. 200 (75-Micrometer) Sieve

Standard Test Method for Piles under Static Axial CompressiveLoad E1-1994 R(1994) Standard Test Method for Blocking Point of Potentially AdhesiveLayers Standard Practice for Effect of Moisture and Temperature onAdhesive Bonds Standard Specification for Methyl Isobutyl Ketone R(1997) Standard Test Method for Distillation of Petroleum Products atReduced Pressure Standard Test Method for Specific Resistance (Resistivity) ofElectrical Insulating Liquids Standard Test Method for Rubber Deterioration - Surface OzoneCracking Outdoors or Chamber (Triangular Specimens) Standard Guide for pH of Aqueous Solutions of Soaps andDetergents Standard Practice for Sampling and Preparing Aqueous Solutionsof Engine Coolants or Antirusts for Testing Purposes Standard Test Methods for Fluoride Ion in Water Standard Test Methods for Resistance of Adhesives to CyclicLaboratory Aging Conditions E1-1997 Standard Test Method for Flexural Strength of Adhesive BondedLaminated Assemblies Standard Test Methods for Pallets and Related StructuresEmployed in Materials Handling and Shipping Standard Test Method for Bulk Specific Gravity and Density ofCompacted Bituminous Mixtures Using Coated Samples E1-1998 Standard Specification for Reagent Water Standard Test Method for Bearing Capacity of Soil for StaticLoad and Spread Footings Standard Specification for Calcium Carbonate Pigments R(1999) Standard Test Method for Viscosity by Ford Viscosity Cup R(1999) Standard Test Methods for Volatile Loss from Plastics UsingActivated Carbon Methods E1-1999 R(1999) Standard Test Methods for Common Properties of Certain Pigments Standard Test Method for Color of Clear Liquids (Platinum-CobaltScale) Standard Test Method for Fineness of Dispersion ofPigment-Vehicle Systems by Hegman-Type Gage Standard Test Method for Sieve Analysis of Glass Spheres E1-1994R(1994) Standard Test Method for Density and Relative Density (SpecificGravity) of Liquids by Bingham Pycnometer R(1998) Standard Test Method for Refractive Index and RefractiveDispersion of Hydrocarbon Liquids Standard Specification for Emulsified Asphalt Used as aProtective Coating for Roofing R(2000) Standard Test Method for Rubber Property - Compression Set atLow Temperatures E1-1998 R(1997) Standard Test Methods for Resistance of Plastic Materials toAbrasion Standard Test Method for Bromide Ion in Water R(1999) Standard Guide for Petroleum Measurement Tables API Standard:API MPMS Ch.11.1; IP Designation: 200/80 (90); BSI Handbook; E1-1997 R(1997) Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume I Table 5A - GeneralizedCrude Oils Correction of Observ Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume II Table 5B - GeneralizedProducts Correction of Observe Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume IV Table 23A -Generalized Crude Oils Correction of Obse

Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume VI Table 24C - VolumeCorrection Factors for Individual Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume VII Table 53A -Generalized Crude Oils Correction of Obs Standard Test Methods for Chemical Oxygen Demand (DichromateOxygen Demand) of Water Standard Test Methods for Nonvolatile Content of Resin SolutionsR(2001) Standard Test Method for Leakage Tendencies of Automotive WheelBearing Greases R(1999) Standard Test Method for Sulfur in Petroleum Products (LampMethod) IP Designation: 107/86 Standard Specification for Pentachlorophenol E1-1997 R(1997) Standard Test Method for Corrosive Sulfur in ElectricalInsulating Oils IP Designation: 315/86 Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume VIII Table 53B -Generalized Products Correction of Obse Standard Guide for Petroleum Measurement Tables PetroleumMeasurement Tables Volume Correction Factors Volume IX Table 54C - VolumeCorrection Factors for Individual Standard Guide for Petroleum Measurement Tables Manual ofPetroleum Measurement Standards Chapter 11.1 - Volume Correction FactorsVolume XIII Table 5D - Generalized Standard Test Method for pH of Engine Coolants and AntirustsE1-1998 R(1997) Standard Test Methods for pH of Water Standard Test Method for Odor of Volatile Solvents and Diluents Standard Test Method for Density, Relative Density (SpecificGravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products byHydrometer Method API Design Standard Test Method for Phthalic Anhydride Content of AlkydResins and Esters Containing Other Dibasic Acids (Gravimetric) E1-1996R(1996) Standard Test Method for Effect of Household Chemicals on Clearand Pigmented Organic Finishes R(1998) Standard Test Method for Flash Point and Fire Point of Liquidsby Tag Open-Cup Apparatus E1-1997 R(1997) Standard Specification for Rubber Sheet Gaskets R(2000) Standard Test Method for Tuft Bind of Pile Yarn Floor CoveringsDiscontinued November 1995 and Reinstated Standard Test Methods for Moisture in Cellulose R(1998) Standard Practice for Rubber - Standard Temperatures for Testing Standard Test Method for Nonvolatile Matter in Volatile Solventsfor Use in Paint, Varnish, Lacquer, and Related Products E1-2000 R(2000) Standard Test Method for Water in Volatile Solvents (KarlFischer Reagent Titration Method) R(1999) Standard Practice for Reporting Particle Size Characteristics ofPigments R(1997) Standard Test Method for Acid Number (Empirical) of Syntheticand Natural Waxes Standard Test Method for Stiffness of Fabrics E1-1999 Standard Test Methods for Chemical Analysis of White TitaniumPigments R(1999) Standard Test Method for Unsaponifiable Matter in Alkyd Resinsand Resin Solutions R(1998) Standard Test Method for Fatty Acid Content of Alkyd Resins andAlkyd Resin Solutions R(1998) Standard Test Method for Rubber Property - InternationalHardness R(1999) (Withdrawn) Standard Test Methods for Rubber from Synthetic Sources- Chemical Analysis Replaced by D5667, D5668, D5775 and D5805 in July 1997

Standard Practice for Rubber and Rubber Latices - Nomenclature Standard Test Method for Twist in Yarns by Direct- Counting Standard Test Method for Tearing Strength of Fabrics byFalling-Pendulum Type (Elmendorf) Apparatus Standard Test Methods for Ammonia Nitrogen in Water Standard Practice for Outdoor Weathering of Plastics Standard Test Method for Micronaire Reading of Cotton Fibers Standard Test Method for Rubber Property - Elongation atSpecific Stress R(1996) (Withdrawn) Standard Specification for Polytetrafluoroethylene(PTFE) Molding and Extrusion Materials Replaced by D4894 and D4895 Standard Test Methods for Fully Cured Silicone Rubber- CoatedGlass Fabric and Tapes for Electrical Insulation Standard Test Method for Volatile Matter in Tricresyl PhosphateR(2001) Standard Test Methods for Indentation Hardness of OrganicCoatings Standard Test Method for Density of Liquid Coatings, Inks, andRelated Products Standard Test Method for Oil Absorption of Pigments byGardner-Coleman Method Standard Test Method for Amylaceous Matter in Adhesives Standard Test Method for Nonvolatile Content of AqueousAdhesives Standard Test Method for Solidification Point of IndustrialOrganic Chemicals Standard Test Method for Diffuse Light Transmission Factor ofReinforced Plastics Panels Standard Practice for Filtered Open-Flame Carbon-Arc Exposuresof Plastics Standard Test Method for ASTM Color of Petroleum Products (ASTMColor Scale) IP Designation: 196/97 Standard Test Method for Density of Plastics by theDensity-Gradient Technique Standard Test Methods for Carbon Black - Ash Content Standard Test Methods for Carbon Black - Heating Loss R(2000) Standard Test Method for Carbon Black - Iodine Adsorption Number Standard Test Methods for Carbon Black - pH Value R(2000) Standard Test Method for Carbon Black, Pelleted - Pour DensityE1-1999 Standard Test Method for Width of Leather Standard Test Method for Vicat Softening Temperature of Plastics Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Plastic Pipe, Schedules 40 and 80 (Discontinued) Standard Test Method for Qualitative Detection ofRosin in Varnishes E1-1993 R(1993) Standard Test Method for Color of Transparent Liquids (GardnerColor Scale) Standard Test Method for Viscosity of Transparent Liquids byBubble Time Method (Withdrawn) Standard Specification For Extruded Acrylic PlasticSheet *NOT CURRENT DOCUMENT (Withdrawn) Standard Test Method for Vanadium in Heavy Fuel OilE1-1993; Withdrawn April 1997; *NOT CURRENT DOCUMENT Standard Test Method for Calculation of Volume and Weight ofIndustrial Aromatic Hydrocarbons R(2000) Standard Test Method for Density and Unit Weight of Soil inPlace by the Sand-Cone Method (Withdrawn) Standard Test Method for Resistance to Plastic Flowof Bituminous Mixtures Using Marshall Apparatus Withdrawn February 1998

(Discontinued) Standard Specification for Flexible CellularMaterials - Vinyl Chloride Polymers and Copolymers (Open-Cell Foam)Discontinued 1998; IHS Notified 07/199 Standard Test Methods for Linear Density of Textile Fibers Standard Test Method for Filler Content of Phenol, Resorcinol,and Melamine Adhesives Standard Test Method for Penetration Test and Split- BarrelSampling of Soils Standard Test Method for Dynamic Shock CushioningCharacteristics of Packaging Material Standard Test Method for Time-To-Failure of Plastic Pipe underConstant Internal Pressure Standard Test Method for Resistance to Short-Time HydraulicPressure of Plastic Pipe, Tubing, and Fittings Standard Terminology for Abbreviated Terms Relating to Plastics Standard Test Method for Carbon Black in Olefin Plastics Standard Test Method for Nitrogen Dioxide Content of theAtmosphere (Griess-Saltzman Reaction) E1-2000 R(2000) Standard Test Method for Oxides of Nitrogen in GaseousCombustion Products (Phenol-Disulfonic Acid Procedures) Standard Test Method for Corrosion Produced by Leather inContact with Metal Standard Test Method for Acidity in Volatile Solvents andChemical Intermediates Used in Paint, Varnish, Lacquer, and Related ProductsR(1999) Standard Test Method for Alkalinity in Acetone R(1999) Standard Test Method for Ester Value of Solvents and ThinnersR(2001) Standard Test Methods for Carbon Black - Sulfur Content Standard Test Method for Compressive Properties of RigidCellular Plastics Standard Test Method for Tensile and Tensile Adhesion Propertiesof Rigid Cellular Plastics R(1995) Standard Test Method for Rubber Property - Abrasion Resistance(Footwear Abrader) R(2000) Standard Test Method for Water in Phenol and Related Materialsby the Iodine Reagent Method Standard Practice for Making and Curing Soil-Cement Compressionand Flexure Test Specimens in the Laboratory Standard Test Methods for Compressive Strength of MoldedSoil-Cement Cylinders Standard Test Methods for Drying, Curing, or Film Formation ofOrganic Coatings at Room Temperature R(1999) (Withdrawn) Standard Test Methods for Elasticity or Toughness ofVarnishes Standard Test Methods for Resistance of Dried Films of Varnishesto Water and Alkali E1-1996 R(1996) Standard Test Methods for Epoxy Content of Epoxy Resins Standard Test Method for Evaluation of Painted or CoatedSpecimens Subjected to Corrosive Environments R(2000) Standard Specification for Flexible Cellular Materials - VinylChloride Polymers and Copolymers (Closed-Cell Foam) Standard Specification for Glass Fabrics (Woven and Treated) forRoofing and Waterproofing Standard Test Methods for Polytetrafluoroethylene Tubing Standard Test Methods for Copper in Water (Discontinued) Standard Test Method for Determining the Amountof Particulate Matter in the Atmosphere by Measurement of the LightAbsorbance of a Filtered Sample E1Standard Test Method for Tensile Properties of Plastics by Useof Microtensile Specimens Standard Test Methods for Impact Resistance of Plastic Film bythe Free-Falling Dart Method

Standard Specification for Isobutyl Acetate (95% Grade) Standard Specification for Isobutyl Alcohol R(1999) Standard Test Method for Water Miscibility of Water- SolubleSolvents Standard Test Methods for Hydrolyzable Chloride Content ofLiquid Epoxy Resins R(1996) Standard Practice for Testing Water Resistance of Coatings UsingWater Fog Apparatus Standard Test Method for Oil Separation from Lubricating GreaseDuring Storage E1-2000 R(2000) (Withdrawn) Standard Test Method for Determination of Water inLiquid Petroleum Products by Karl Fischer Reagent Standard Test Method for Transparency of Plastic Sheeting Standard Test Method for Refractive Index of Viscous Materials Standard Specification for Preformed Expansion Joint Filler forConcrete Paving and Structural Construction (Nonextruding and ResilientBituminous Types) Standard Specification for Preformed Sponge Rubber and CorkExpansion Joint Fillers for Concrete Paving and Structural ConstructionE1-1996 R(1996) Standard Specification for Adhesive for Acoustical MaterialsDiscontinued 1993 and Reinstated Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticPipe, Schedules 40, 80, and 120 Standard Test Method for Water and Sediment in Fuel Oils by theCentrifuge Method (Laboratory Procedure) IP Designation: MPMS Chapter 10.6;British Standard 2882 Standard Practice for Carbon Black - Sampling Packaged ShipmentsR(1997) Standard Test Method for Measuring Thickness of Leather TestSpecimens Standard Test Method for Apparent Viscosity of Plastisols andOrganosols at Low Shear Rates Standard Test Method for Naphthalene Hydrocarbons in AviationTurbine Fuels by Ultraviolet Spectrophotometry Standard Test Methods for Chemical Analysis of StrontiumChromate Pigment R(1999) Standard Test Method for Package Stability of Paint Standard Specification for Jet-Fuel-Resistant Concrete JointSealer, Hot-Applied Elastic Type Standard Specification for Mineral Aggregate Used on Built-UpRoofs R(2000) Standard Test Method for Moisture in Mineral Aggregate Used onBuilt-Up Roofs E1 R(1999) Standard Test Method for Detection and Measurement of PartialDischarge (Corona) Pulses in Evaluation of Insulation Systems R(1998) Standard Specification for Rubber Rings for Asbestos- CementPipe R(2000) (Discontinued) Standard Practice for Elevated Temperature AgingUsing a Tubular Oven Discontinued 1998; IHS Notified 08/1999; *NOT CURRENTDOCUMENT Standard Test Method for Density of Adhesives in Fluid Form Standard Test Method for Peel Resistance of Adhesives (T-PeelTest) E1-2001 Standard Test Method for Foaming Tendencies of Engine Coolantsin Glassware Standard Test Method for CBR (California Bearing Ratio) ofLaboratory-Compacted Soils Standard Test Method for Turbidity of Water Standard Test Method for Static and Kinetic Coefficients ofFriction of Plastic Film and Sheeting Standard Test Methods for Apparent Density, Bulk Factor, andPourability of Plastic Materials (Discontinued) Standard Practice for Sampling of PlasticsDiscontinued 1998;IHS Notified 08/1999; *NOT CURRENT DOCUMENT R(1989) Standard Test Method for Linear Density of Yarn (Yarn Number) bythe Skein Method

Standard Test Methods for Rubber Property - Shrinkage of Raw andCompounded Hot-Polymerized StyreneButadiene Rubber (SBR) Standard Test Methods for Particle Size (Sieve Analysis) ofPlastic Materials Standard Test Method for Propagation Tear Resistance of PlasticFilm and Thin Sheeting by Pendulum Method (Withdrawn) Standard Test Method for Yellowness Index ofPlastics E1-1988 R(1988) (Discontinued) Standard Specification for Rigid Poly(VinylChloride) Plastic Sheet R(1988) Standard Practice for Preparation of Compression- MoldedPolyethylene Test Sheets and Test Specimens Standard Test Method for Alpha Particle Radioactivity of Water (Withdrawn) Standard Test Method for Load-Carrying Capacity ofPetroleum Oil and Synthetic Fluid Gear Lubricants E1-1994; Discontinued 1996 Standard Test Method for Acetone Tolerance of Heat- BodiedDrying Oils E1-1995 R(1995) Standard Test Method for Ash in Drying Oils and Fatty AcidsE1-1995 R(1995) Standard Test Method for Quantitative Determination of Break inDrying Oils E1-1995 R(1995) Standard Test Method for Foots in Raw Linseed Oil (VolumetricMethod) E1-1995 R(1995) Standard Test Method for Hydroxyl Value of Fatty Oils and AcidsE1-1995 R(1995) Standard Test Method for Loss on Heating of Drying Oils E1-1995R(1995) Standard Test Method for Saponification Value of Drying Oils,Fatty Acids, and Polymerized Fatty Acids R(1995) Standard Test Method for Tung Oil Quality E1-1995 R(1995) Standard Test Method for Unsaponifiable Matter in Drying Oils,Fatty Acids, and Polymerized Fatty Acids R(1998) Standard Terminology Relating to Paper and Paper Products Standard Practice for Methods of Closing, Sealing, andReinforcing Fiberboard Boxes Standard Test Method for Acid Value of Fatty Acids andPolymerized Fatty Acids R(1998) Standard Test Method for Fatty Acid Composition by Gas- LiquidChromatography of Methyl Esters E1-1995 R(1995) Standard Classification System for Rubber Products in AutomotiveApplications SAE J200 Standard Test Methods for Evaluation of Total Sulfation Activityin the Atmosphere by the Lead Dioxide Technique Standard Practice for Preparing Coal Samples for AnalysisE1-2001 (Discontinued) Standard Test Method for Gross Calorific Value ofCoal and Coke by the Adiabatic Bomb Calorimeter Standard Test Methods of Sampling and Chemical Analysis ofChlorine-Containing Bleaches E1-1995 R(1995) Standard Test Method for Cloud Point of Nonionic SurfactantsR(1997) Standard Specification for Cutback Asphalt (Slow- Curing Type) Standard Specification for Cutback Asphalt (Medium- Curing Type) Standard Test Methods for Water Vapor Content of ElectricalInsulating Gases by Measurement of Dew Point Standard Test Method for Theoretical Maximum Specific Gravityand Density of Bituminous Paving Mixtures Standard Test Method for Solubility of Asphalt Materials inTrichloroethylene

Standard Test Methods for Measuring Zipper Dimensions Standard Specification for Marine Fuels R(1998) Standard Test Methods for Total, Primary, Secondary, andTertiary Amine Values of Fatty Amines, Amidoamines, and Diamines by RefereePotentiometric Method E1-1998 R(1 Standard Test Method for Print Resistance of Lacquers Standard Test Method for Dynamic Water Resistance of Shoe UpperLeather by the Maeser Water Penetration Tester Standard Specification for Polyethylene Film and Sheeting Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule40 E1-1999 Standard Test Methods for Nonvolatile Matter in HalogenatedOrganic Solvents and Their Admixtures R(2000) Standard Test Methods for Specific Gravity of HalogenatedOrganic Solvents and Their Admixtures R(2000) Standard Test Method for Oxidation Stability of InhibitedMineral Insulating Oil by Pressure Vessel Standard Practice for Rock Core Drilling and Sampling of Rockfor Site Investigation Standard Practice for Oven Heat Stability of Poly(VinylChloride) Compositions R(1997) Standard Specification for FEP-Fluorocarbon Molding andExtrusion Materials Standard Test Method for Determining Dimensions of ThermoplasticPipe and Fittings Standard Test Method for Coated Fabrics - Low- Temperature BendTest R(1998) Standard Test Methods for Rubber Property - Brittleness Point ofFlexible Polymers and Coated Fabrics R(2000) Standard Test Method for Adequacy of Fusion of ExtrudedPoly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion Standard Test Method for Smoke Density in Flue Gases fromBurning Distillate Fuels R(1999) Standard Practice for Conversion of Kinematic Viscosity toSaybolt Universal Viscosity or to Saybolt Furol Viscosity E1, E2-2000 R(1999) Standard Test Method for Basic Calibration of Master Viscometersand Viscosity Oil Standards Standard Test Method for pH of Aqueous Extracts of Wool andSimilar Animal Fibers R(2000) Standard Test Method for Density and Unit Weight of Soil inPlace by the Rubber Balloon Method Standard Test Methods for Calibration of LaboratoryMechanical-Rammer Soil Compactors E1-1997 R(1996) Standard Test Method for Kinematic Viscosity of Asphalts(Bitumens) IP Designation: 319/84 (89) Standard Test Method for Viscosity of Asphalts by VacuumCapillary Viscometer IP Designation: 222/84 (89) Standard Test Method for Folding Endurance of Paper by theM.I.T. Tester Standard Test Method for Concentration of Formaldehyde Solutions Standard Test Methods for Rheological Properties of Non-NewtonianMaterials by Rotational (Brookfield Type) Viscometer Standard Test Method for Adhesion of Organic Coatings by ScrapeAdhesion Standard Test Method for Bursting Strength of Leather by theBall Method Standard Test Method for Breaking Strength of Leather by theGrab Method Standard Test Method for Tensile Strength of Leather Standard Test Method for Grain Crack and Extension of Leather bythe Mullen Test Standard Test Method for Slit Tear Resistance of Leather

Standard Test Method for Compressibility of Leather Standard Practice for Wet Preparation of Soil Samples forParticle-Size Analysis and Determination of Soil Constants R(1998) Standard Test Method for Creep Properties of Package CushioningMaterials (Withdrawn) Standard Practice for Rubber Properties in ForcedVibration Replaced by D5992 Standard Specification for Solvent Cement forAcrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings Standard Test Method for Freeze-Thaw Resistance of Water-BorneCoatings Standard Test Method for Calculation of Color Differences fromInstrumentally Measured Color Coordinates R(2000) Standard Test Method for Identification of Oils and Oil Acids inSolvent-Reducible Paints R(1999) Standard Practice for Testing Water Resistance of Coatings in100% Relative Humidity Standard Practice for Detergent Resistance of Organic Finishes Standard Test Method for Metal Corrosion by Halogenated OrganicSolvents and Their Admixtures R(2000) Standard Test Method for Extractable Matter in Textiles Standard Practice for Sampling Yarn for Testing (Discontinued) Standard Test Method for Tearing Strength ofWoven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-Of-TraverseTensile Testing Machine) *NOT C Standard Test Method for Wear Preventive Characteristics ofLubricating Grease (Four-Ball Method) R(1996) Standard Test Method for Analysis of High-Purity n- Heptane andIsooctane by Capillary Gas Chromatography R(1998) Standard Practice for Calculating Viscosity Index from KinematicViscosity at 40 and 100 Degrees C IP Designation: 226/91 (95); BritishStandard 4459 R(1998) Standard Test Method for Oxidation Stability of Steam TurbineOils by Rotating Pressure Vessel Standard Test Method for Trace Sediment in Lubricating Oils Standard Test Method for Particulate Contaminant in AviationFuel by Line Sampling IP Designation: 216/97 Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Plastic Pipe (SDR-PR) Standard Test Method for Apparent Hoop Tensile Strength ofPlastic or Reinforced Plastic Pipe by Split Disk Method Standard Test Methods for Liquid-Contaminant, Inclined- PlaneTracking and Erosion of Insulating Materials Standard Practice for Underground Installation of ThermoplasticPipe for Sewers and Other Gravity-Flow Applications Standard Test Method for Resistance of Shoe Upper Leather toArtificial Perspiration Standard Test Method for Methylene Blue Active SubstancesE1-1995 R(1995) Standard Test Method for Tensile Properties of Glass FiberStrands, Yarns, and Rovings Used in Reinforced Plastics Standard Test Method for Short-Beam Strength of Polymer MatrixComposite Materials and Their Laminates E1-2000 Standard Test Method for Apparent Density of Leather Standard Test Method for Antimony Oxide in White PigmentSeparated from Solvent-Reducible Paints R(1999) Standard Test Method for Trace Impurities in Monocyclic AromaticHydrocarbons by Gas Chromatography

Standard Test Method for Volatile Content of Coatings E1-2001 Standard Test Method for Tensile Properties of Organic Coatings Standard Test Method for Pigment Content of Solvent- ReduciblePaints R(1999) Standard Practice for Separation of Vehicle from Solvent-ReduciblePaints R(1999) Standard Test Method for Heat of Combustion of Hydrocarbon Fuelsby Bomb Calorimeter (High-Precision Method) Standard Test Method for Color of Dyed Aviation GasolinesE1-2001 R(2001) (Withdrawn) Standard Test Method for Viscosity of Epoxy Resinsand Related Components Standard Specification for Cationic Emulsified Asphalt Standard Test Method for Determination of External LoadingCharacteristics of Plastic Pipe by Parallel- Plate Loading (Withdrawn) Standard Specification for Perforated,Laminated-Wall Bituminized Fiber Pipe for General Drainage *NOT CURRENTDOCUMENT Standard Test Method for Sand Equivalent Value of Soils and FineAggregate Standard Test Method for Oxidation Stability of MineralInsulating Oil Standard Test Method for Determination of the Impact Resistanceof Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight) Standard Specification for Polyethylene (PE) Plastic Pipe,Schedules 40 and 80, Based on Outside Diameter Standard Test Method for Identification of Carboxylic Acids inAlkyd Resins E1-1996 R(1996) Standard Test Method for Specular Gloss of Plastic Films andSolid Plastics Standard Specification for Threaded Poly(Vinyl Chloride) (PVC)Plastic Pipe Fittings, Schedule 80 Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticPipe Fittings, Schedule 40 Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticPipe Fittings, Schedule 80 Standard Specification for Sulfur Hexafluoride Standard Specification for Felt Standard Test Method for Accelerated Evaluation of WoodPreservatives for Marine Services by Means of Small-Size Specimens E1-1995R(1994) Standard Test Method for Scrub Resistance of Wall Paints Standard Practice for Description and Identification of Soils(Visual-Manual Procedure) Standard Test Method for Forms of Sulfur in Coal R(1998) Standard Test Method for Thermal Shock Sensitivity of Solid FilmLubricants E1-1998 R(1998) Standard Test Method for Compatibility of Materials with LiquidOxygen (Impact Sensitivity Threshold and Pass-Fail Techniques) Standard Specification for Reinforced Epoxy Resin Gas PressurePipe and Fittings Standard Test Methods for Complex Permittivity (DielectricConstant) of Solid Electrical Insulating Materials at Microwave Frequenciesand Temperatures to 1650 Degree Standard Test Method for Viscosity and Viscosity Change AfterStanding at Low Temperature of Aircraft Turbine Lubricants R(1998) Standard Test Method for Vapor-Liquid Ratio of Spark- IgnitionEngine Fuels Standard Test Method for Apparent Viscosity of Adhesives HavingShear-Rate-Dependent Flow Properties R(1997) Standard Practice for Classifying Visual Defects inGlass-Reinforced Plastic Laminate Parts Standard Practice for Xenon-Arc Exposure of Plastics Intendedfor Outdoor Applications Standard Test Method for Isocyanate Groups in Urethane Materialsor Prepolymers

Standard Test Method for Field Vane Shear Test in Cohesive Soil Standard Test Method for Total Organic Carbon in Water E1-1994 Standard Test Method for Phenols in Water by Gas- LiquidChromatography Standard Test Method for Puncture-Propagation Tear Resistance ofPlastic Film and Thin Sheeting Standard Test Method for Ignition Loss of Cured ReinforcedResins (Withdrawn) Standard Test Method for Hydrostatic CompressiveStrength of Glass-Reinforced Plastic Cylinders E1-1990; Discontinued 1996R(1990) Standard Test Method for Evaporation Loss of Lubricating Greasesover Wide-Temperature Range Standard Test Method for Measurement of Extreme- PressureProperties of Lubricating Grease (Four-Ball Method) Standard Specification for Plastic Insert Fittings forPolyethylene (PE) Plastic Pipe Standard Test Method for Total Ash in Leather Standard Test Method for Sulfur in Petroleum Products byWavelength Dispersive X-Ray Fluorescence Spectrometry Standard Test Method for Endurance (Wear) Life and Load-CarryingCapacity of Solid Film Lubricants (Falex Pin and Vee Method) R(1998) Standard Specification for Preformed Polychloroprene ElastomericJoint Seals for Concrete Pavements R(1998) Standard Test Method for Rubber Property - Resilience byVertical Rebound Standard Test Method for Corrosion Characteristics of Solid FilmLubricants E1-2000 Standard Guide for Preparation of Metal Surfaces for AdhesiveBonding R(1995) (Withdrawn) Standard Test Methods for Moisture in Textiles Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings Standard Specification for Polybutylene (PB) Plastic Pipe(SIDR-PR) Based on Controlled Inside Diameter Standard Specification for Poly(Vinyl Chloride) (PVC) PlasticDrain, Waste, and Vent Pipe and Fittings Standard Specification for Polybutylene (PB) Plastic Tubing Standard Test Method for Measuring Wear Properties of FluidLubricants (Falex Pin and Vee Block Method) R(1999) Standard Test Methods for Heat-Shrinkable Tubing for ElectricalUse Standard Specification for Joints for IPS PVC Pipe Using SolventCement Standard Specification for Socket-Type Polyethylene Fittings forOutside Diameter-Controlled Polyethylene Pipe and Tubing Standard Test Method for Volume Nonvolatile Matter in Clear orPigmented Coatings R(1998) Standard Test Method for Determination of the Pigment Content ofSolvent-Reducible Paints by High-Speed Centrifuging R(1999) Standard Practice for Rubber Chemicals - Determination ofInfrared Absorption Characteristics R(1998) Standard Test Method for Water and Sediment in Middle DistillateFuels by Centrifuge E1-2001 R(2001) Standard Test Method for Calibration and Operation of the FalexBlock-On-Ring Friction and Wear Testing Machine R(1998)

Standard Test Methods for Bonded, Fused, and Laminated ApparelFabrics R(1995) Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipeand Fittings Standard Test Methods for Void Content of Reinforced Plastics Standard Specification for Polyethylene (PE) Plastic Tubing (Withdrawn) Standard Specification for Poly(Vinyl Chloride)(PVC) Plastic Tubing *NOT CURRENT DOCUMENT (Withdrawn) Standard Methods for Chemical Analysis of TribasicLead Phosphosilicate *NOT CURRENT DOCUMENT Standard Specification for Acrylonitrile-Butadiene- Styrene(ABS) Sewer Pipe and Fittings Errata Standard Practice for Underground Installation of ThermoplasticPressure Piping Standard Test Method for Resistance of Organic Coatings to theEffects of Rapid Deformation (Impact) E11999 R(1999) Standard Test Method for Preparation of Methyl Esters from Oilsfor Determination of Fatty Acid Composition by Gas-Liquid ChromatographyR(1998) Standard Specification for Ozone-Resistant Ethylene- AlkenePolymer Insulation for Wire and Cable Standard Guide for Testing Filiform Corrosion Resistance ofOrganic Coatings on Metal Standard Test Method for Purity of Methyl Ethyl Ketone by GasChromatography Standard Test Method for Chromic Oxide in Leather (PerchloricAcid Oxidation) R(1998) Standard Test Method for pH of Leather Standard Practice for Sampling Leather for Physical and ChemicalTests American Leather Chemists Assn. Standard Method J1-1956 R(1996) Standard Test Method for Measuring the Relative Stiffness ofLeather by Means of a Torsional Wire Apparatus Standard Specification for Asphalt Roof Cement E1-1997 R(1997) Standard Specification for Aluminum-Pigmented Asphalt RoofCoatings, Non-Fibered, Asbestos Fibered, and Fibered Without Asbestos Standard Specification for Lubricant for Installation ofPreformed Compression Seals in Concrete Pavements R(1998) Standard Test Method for Obtaining Hydrostatic Design Basis forThermoplastic Pipe Materials Standard Test Method for Water Absorption of Rigid CellularPlastics Standard Test Method for Density of Smoke from the Burning orDecomposition of Plastics Standard Specification for Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Hot- and Cold-Water Distribution Systems Standard Specification for Styrene-Rubber (SR) Plastic DrainPipe and Fittings Standard Practice for Making Solvent-Cemented Joints withPoly(Vinyl Chloride) (PVC) Pipe and Fittings Standard Test Method for Open-Cell Content of Rigid CellularPlastics by the Air Pycnometer R(1998) Standard Test Method for Adhesion of Pressure- Sensitive Tape toFiberboard at 90 Degree Angle and Constant Stress R(1999) Standard Test Method for Measuring the Minimum OxygenConcentration to Support Candle-like Combustion of Plastics (Oxygen Index) Standard Test Methods for Moisture in Activated Carbon

Standard Test Method for Nitrogen Content (Kjeldahl) and HideSubstance Content of Leather Standard Test Method for Research and Motor Method OctaneRatings Using On-Line Analyzers IP Designation: 360/96 R(1999) Standard Test Method for Boiling Range Distribution of PetroleumFractions by Gas Chromatography Standard Test Method for Base Number of Petroleum Products byPotentiometric Perchloric Acid Titration IP Designation: 276/95 Standard Test Methods for Sulfur Dioxide Content of theAtmosphere (West-Gaeke Method) Standard Test Method for Determining Durability of AdhesiveJoints Stressed in Shear by Tension Loading Standard Test Methods for Density of Soil and Soil- Aggregate inPlace by Nuclear Methods (Shallow Depth) E1-1997 (Withdrawn) Standard Practice for Rubber Seals - Compatibilitywith Service Fluids *NOT CURRENT DOCUMENT Standard Test Method for Apparent Density of Industrial AromaticHydrocarbons R(2000) Standard Test Methods for Emulsified Bitumens Used as ProtectiveCoatings Standard Specification for Graded Aggregate Material for Basesor Subbases for Highways or Airports Standard Test Method for Measuring Break Pattern of Leather(Break Scale) Standard Test Method for Total Acid Acceptance of HalogenatedOrganic Solvents (Nonreflux Methods) R(2000) Standard Test Method for Density of Bituminous Concrete in Placeby Nuclear Methods R(1997) Standard Test Method for Acidity-Alkalinity of HalogenatedOrganic Solvents and Their Admixtures Standard Test Methods for Tensile, Compressive, and FlexuralCreep and Creep-Rupture of Plastics Standard Practice for Determining Application Rate of BituminousDistributors Standard Specification for Polybutylene (PB) Plastic Pipe(SDR-PR) Based on Outside Diameter E1-1999 Standard Test Method for Flame Height, Time of Burning, and Lossof Mass of Rigid Thermoset Cellular Plastics in a Vertical Position (Withdrawn) Standard Specification for Polyethylene and EthyleneCopolymer Plastic Sheeting for Pond, Canal, and Reservoir Lining Discontinued1996 (Withdrawn) Standard Test Methods for Impact Resistance of Flat,Rigid Plastic Specimens by Means of a Tup (Falling Weight) Standard Test Methods for Hookup Wire Insulation Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC)Sewer Pipe and Fittings (Withdrawn) Standard Test Methods for Carbon Black - SurfaceArea by Nitrogen Adsorption R(1997) Standard Test Method for Tensile Properties of Polymer MatrixComposite Materials Standard Practice for Heat Aging of Plastics without LoadR(1997) Standard Guide for Three-Piece Steel and Tinplate Straight-Walland Necked-In Aerosol Cans E1-2000 Standard Terminology Relating to Aerosol Products (Withdrawn) Standard Practice for Labeling Aerosol Packages (Withdrawn) Standard Practice for Reporting Laboratory ResultsWhen Checking Aerosol Containers E1-1991 R(1991) (Withdrawn) Standard Specification for Safe Fill of AerosolContainers E1-1991 R(1991) Standard Test Method for Delivery Rate of Aerosol ProductsE1-1999 R(1999) Standard Test Method of Rapid Pressure Determination ofPressurized Products

(Withdrawn) Standard Practice for Comparison of Spray Patternsof Aerosol Products E1-1991 R(1991) Standard Test Method for Determination of Leaks in FlexiblePackaging by Bubble Emission (Withdrawn) Standard Specification for Flexible Poly(VinylChloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining Standard Practice for Safe Filling of Low-Pressure PressurizedProducts E1-1997 R(1997) Standard Test Method for Particle-Size Distribution ofSpace-Insecticide Aerosol R(1993) Standard Test Method for Aerosol Products for Delivered Mass (Discontinued) Standard Test Method for Stretch Properties ofFabrics Woven from Stretch Yarns E1-1980 R(1980) Standard Test Method for Trace Quantities of Sulfur in LightLiquid Petroleum Hydrocarbons by Oxidative Microcoulometry Standard Specification for Solvent Cements for Styrene- Rubber(SR) Plastic Pipe and Fittings Standard Test Method for Rubber Property - Hydrolytic StabilityR(1994) Standard Specification for Solvent Cements for Transition Jointsbetween Acrylonitrile-Butadiene- Styrene (ABS) and Poly(Vinyl Chloride) (PVC)Non- Pressure Piping Co Standard Specification for Joints for Plastic Pressure PipesUsing Flexible Elastomeric Seals Standard Test Method for Carbon Monoxide in the Atmosphere(Continuous Measurement by Nondispersive Infrared Spectrometry) E1-2000 R(2000) Standard Test Method for Fatigue Properties of Adhesives inShear by Tension Loading (Metal/Metal) Standard Practice for Qualitative Identification of Polymers inEmulsion Paints R(1999) Standard Test Method for Constituent Content Composite Materials Standard Test Method for Ash in the Analysis Sample of Coal andCoke from Coal Standard Test Method for Volatile Matter in the Analysis Sampleof Coal and Coke Standard Practice for Rubber - Preparation of Pieces for TestPurposes from Products R(1998) Standard Specification for Joints for Drain and Sewer PlasticPipes Using Flexible Elastomeric Seals Standard Specification for Unmodified Poly(Vinylidene Fluoride)(PVDF) Molding Extrusion and Coating Materials Standard Test Method for Thiol (Mercaptan) Sulfur in Gasoline,Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method) Standard Test Method for Total Nitrogen in Lubricating Oils andFuel Oils by Modified Kjeldahl Method Standard Test Method for Salts in Crude Oil (ElectrometricMethod) Standard Test Method for Phosphorus in Gasoline Standard Test Method for Undissolved Water in Aviation TurbineFuels R(1996) Standard Test Method for Acidity in Aviation Turbine Fuel IPDesignation: 354/81(87) Standard Practice for General Ambient Air Analyzer ProceduresR(2000) (Withdrawn) Standard Specification for Fabric- Reinforced,Vulcanized Rubber Sheeting for Pond, Canal, and Reservoir Lining *NOT CURRENTDOCUMENT Standard Test Methods for Aromatics in Mineral Spirits by GasChromatography Standard Specification for Butt Heat Fusion Polyethylene (PE)Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing Standard Test Method for Separation and Collection ofParticulate and Gaseous Fluorides in the Atmosphere (SodiumBicarbonate-Coated Glass Tube and Particulate Filter Standard Practice for Vacuum Distillation of Solvents fromSolvent-Reducible Paints for Analysis R(1998)

Standard Test Method for Evaluating Degree of SurfaceDisfigurement of Paint Films by Microbial (Fungal or Algal) Growth or Soiland Dirt Accumulation Standard Test Methods for Flash Point of Liquids by Small ScaleClosed-Cup Apparatus E1-1997 Standard Test Methods for Analysis of White Zinc PigmentsR(1999) Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes E1-1999 R(1997) (Withdrawn) Standard Test Method for Gross Calorific Value ofCoal and Coke by the Isoperibol Bomb Calorimeter Replaced by D5865 Rev A:1999 (Discontinued) Standard Specification for PTFE Resin MoldedSheet Replaced by ASTM D3294-97 R(1996) Standard Specification for PTFE Resin Skived Tape Standard Specification for Polybutylene (PB) Plastic Hot- andCold-Water Distribution Systems Standard Specification for Emulsified Coal-Tar Pitch (MineralColloid Type) Standard Test Method for Purity of Methyl Isobutyl Ketone by GasChromatography Standard Test Method for Peel Adhesion of Pressure- SensitiveTape Standard Test Method for Low Concentrations of Lead, Cadmium,and Cobalt in Paint by Atomic Absorption Spectroscopy R(1999) Standard Test Method for Life of Lubricating Greases in BallBearings at Elevated Temperatures Standard Test Method for Estimation of Hydrogen Content ofAviation Fuels R(2000) Standard Test Method for Film Hardness by Pencil Test Standard Specification for Polytetrafluoroethylene (PTFE) ResinCast Film Standard Test Method for Vanadium in Water R(1998) Standard Specification for Vinyl-Coated Glass Yarns Standard Test Method for Tensile Strength and Young's Modulusfor High-Modulus Single-Filament Materials E1- 1989 R(1989) Standard Specification for Viscosity-Graded Asphalt Cement forUse in Pavement Construction R(1999) Standard Test Method for Infiltration Rate of Soils in FieldUsing Double-Ring Infiltrometer Standard Test Method for Coated Fabrics Abrasion Resistance(Rotary Platform, Double-Head Abrader) R(1999) Standard Specification for Liquid Sodium Silicates R(1997) Standard Test Methods for Water in Halogenated Organic Solventsand Their Admixtures R(2001) Standard Test Method for Compressive Properties of PolymerMatrix Composite Materials with Unsupported Gage Section by Shear Loading Standard Test Method for Enthalpies of Fusion andCrystallization of Polymers by Differential Scanning Calorimetry (DSC) Standard Test Method for Unreacted Toluene Diisocyanates inUrethane Prepolymers and Coating Solutions by Gas Chromatography E1-1996R(1996) Standard Test Method for Mechanical Cone Penetration Tests ofSoil Standard Test Method for Chloride in Trichlorotrifluoroethane (Withdrawn) Standard Test Method for Water Content ofTrichlorotrifluoroethane with Karl Fischer Reagent *NOT CURRENT DOCUMENT Standard Test Method for Purity of Halogenated Organic Solvents

Standard Practice for Rubber - Identification by Pyrolysis-GasChromatography R(1998) Standard Specification for Asphalt Shingles Made from Glass Feltand Surfaced with Mineral Granules Standard Test Method for Tension-Tension Fatigue of PolymerMatrix Composite Materials Standard Test Method for Determining Electrolytic Corrosion ofCopper by Adhesives R(2000) Standard Specification for Rubber Contraceptives (Male Condoms) Standard Test Method for Hexane Extraction of Leather Standard Test Methods for Structural Panels in Tension E1-1995R(1995) Standard Test Method for In-Plane Shear Response of PolymerMatrix Composite Materials by Tensile Test of a +/-45 Degree Laminate R(2001) Standard Test Method for Matrix Solids Content of CompositePregreg Standard Test Method for Volatiles Content of Composite MaterialPrepreg Standard Test Method for Resin Flow of Carbon Fiber- EpoxyPrepreg Standard Test Method for Gel Time of Carbon Fiber- Epoxy Prepreg Standard Test Method for Alcohol Content and Purity of AcetateEsters by Gas Chromatography Standard Practice for Laboratory Preparation of Soil- LimeMixtures Using a Mechanical Mixer E1-1997 R(1996) Test Method for Tensile Properties of Fiber-Reinforced MetalMatrix Composites E1-2000 Standard Test Methods for Lead in Water Standard Practice for Determining Dimensions of"Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe andFittings Standard Test Methods for Flexible Cellular Materials - Slab,Bonded, and Molded Urethane Foams Standard Specification for Polychlorotrifluoroethylene (PCTFE)Extruded Plastic Sheet and Film Standard Practice for Accelerated Aging of Pressure- SensitiveTapes R(1998) Standard Practice for Sampling and Analysis of New Built-Up RoofMembranes E1-1994 R(1994) Standard Test Method for Testing Antifouling Panels in ShallowSubmergence R(1998) Standard Test Method for Low Concentrations of Mercury in Paintby Atomic Absorption Spectroscopy R(1999) Standard Test Method for Trace Chloride Ion in Engine Coolants Standard Specification for Insect Screening and Louver ClothWoven from Vinyl-Coated Glass Yarns Standard Performance Specification for Woven, Lace, and KnitHousehold Curtain and Drapery Fabrics Standard Test Method for Hydrogen Content of Aviation TurbineFuels by Low Resolution Nuclear Magnetic Resonance Spectrometry IP Designation:338/98 Standard Test Method for Peroxide Number of Aviation TurbineFuels Standard Practice for Quality Assurance of Pressure- SensitiveTapes Standard Test Method for Low Concentrations of Chromium in Paintby Atomic Absorption Spectroscopy R(1999) Standard Test Method for Semiquantitative Determination of FishOil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid ChromatographyR(1998)

Standard Practice for Reporting Cure Times of Ultraviolet-CuredCoatings R(2001) Standard Specification for High-Flash Aromatic Naphthas Standard Specification for Rubber-Coated Cloth Hospital SheetingR(2000) Standard Test Method for Tensile Strength and Elongation ofPressure-Sensitive Tapes E1-1997 Standard Test Method for Total Fluorine in Coal by the OxygenBomb Combustion/Ion Selective Electrode Method Standard Specification for Rubber Finger Cots Standard Test Methods for Length of Woven Fabric E1- 1996R(1996) Standard Test Methods for Width of Textile Fabric Standard Test Method for Fabric Count of Woven Fabric (Withdrawn) Standard Test Method for Hydraulic Bursting Strengthof Knitted Goods and Nonwoven Fabrics Diaphragm Bursting Strength TesterMethod (Withdrawn) Standard Test Method for Bursting Strength ofKnitted Goods - Constant-Rate-Of-Traverse (CRT) Ball Burst Test Standard Test Method for Water Content of Coatings by DirectInjection into a Gas Chromatograph Standard Test Method for Density of High-Modulus Fibers Standard Test Method for Unwind Force of Pressure- SensitiveTapes R(2001) Standard Test Method for Water Penetration Rate ofPressure-Sensitive Tapes R(2001) Standard Test Method for Water Vapor Transmission ofPressure-Sensitive Tapes R(2001) Standard Practice for Underground Installation of"Fiberglass" (Glass-Fiber-Reinforced Thermosetting- Resin) Pipe Standard Test Method for in-Plane Shear Strength of ReinforcedPlastics Standard Specification for Tolerances for Knitted Fabrics Standard Test Method for Adherence to Linerboard ofPressure-Sensitive Tape at Low Temperature R(2001) Standard Practice for Packaging/Packing of Plastics R(1998) (Withdrawn) Standard Specification for Toilet Tissue forIndustrial and Institutional Use Should Be Used Instead of MIL-P-43988, WhichWas Cancelled on August 6, 1999 Standard Practices for Design, Testing, and Construction ofSlurry Seal Standard Test Method for Tensile Properties of PultrudedGlass-Fiber-Reinforced Plastic Rod Standard Specification for Polycarbonate (PC) Unfilled andReinforced Material Standard Test Method for Flash Point by the Equilibrium Methodwith a Closed-Cup Apparatus E1-1996 R(1996) Standard Test Method for Determining Water SeparationCharacteristics of Aviation Turbine Fuels by Portable Separometer Standard Specification for Strapping, Nonmetallic (and JoiningMethods) Standard Specification for Strapping, Flat Steel and Seals Standard Classification System for Specifying Plastic Materials Standard Test Methods for Rubber - Determination of MetalContent by Flame Atomic Absorption (AAS) Analysis R(1998)

Standard Test Method for Water in Crude Oil by Distillation APIDesignation: Chapter 10.2 (MPMS); IP Designation: 358/97; E1-2000 R(2000) Standard Test Methods for Properties of Continuous FilamentCarbon and Graphite Fiber Tows Standard Test Method for Moisture in Plastics by CoulometricRegeneration of Phosphorus Pentoxide Standard Specification for Coal Tar Roof Cement, AsbestosContaining E1 R(2000) Standard Test Method for Phosphorus in Lubricating Oils andAdditives by Quinoline Phosphomolybdate Method Standard Test Method for Detection of Copper Corrosion fromLubricating Grease Standard Test Method for Density and Relative Density of Liquidsby Digital Density Meter IP Designation: 365/84(86) Standard Practice for Manual Sampling of Petroleum and PetroleumProducts IP Designation: IMPMS (Chapter 8.1) R(2000) Standard Test Method for Abrasion Resistance of Organic Coatingsby the Taber Abraser Standard Practice for Determining and Reporting DynamicMechanical Properties of Plastics Standard Classification System for Nylon Injection and ExtrusionMaterials (PA) Standard Specification for Reinforced and Filled PolyphenyleneSulfide (PPS) Injection Molding and Extrusion Materials Standard Test Methods for Compounding Materials - Flame AtomicAbsorption Technique - Determination of Metals R(1997) Standard Practice for Description of Frozen Soils (Visual-ManualProcedure) E2-1999 R(1994) Standard Terminology Relating to Dynamic Mechanical Measurementson Plastics (Discontinued) Standard Specification for Poly(Vinyl Chloride)(PVC) Prime Windows/Sliding Glass Doors Standard Specification for Polypropylene Injection and ExtrusionMaterials Standard Test Method for Thermal Oxidative Resistance of CarbonFibers R(1999) Standard Specification for Vapor-Degreasing Grade and GeneralSolvent Grade 1,1,1-Trichloroethane (Withdrawn) Standard Test Method for Abrasion Resistance ofTextile Fabrics (Oscillatory Cylinder Method) Standard Practice for Performance Testing of Shipping Containersand Systems E1-2000 Standard Test Method for Wear Preventive Characteristics ofLubricating Fluid (Four-Ball Method) R(1999) Standard Terminology Relating to Petroleum, Petroleum Products,and Lubricants E1: 2000 Standard Practice for Automatic Sampling of Petroleum andPetroleum Products IP Designation: MPMS Chapter 8.2 R(2000) Standard Classification for Acetal (POM) Molding and ExtrusionMaterials Standard Specification for Styrene-Acrylonitrile (SAN) Injectionand Extrusion Materials Standard Test Methods for Evaluating the Degree of Chalking ofExterior Paint Films Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) andRelated PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building ProductsCompounds Standard Specification for Styrene-Butadiene Sheeting Standard Test Methods for Sulfur in the Analysis Sample of Coaland Coke Using High-Temperature Tube Furnace Combustion Methods Standard Test Methods for Maximum Index Density and Unit Weightof Soils Using a Vibratory Table Standard Test Methods for Minimum Index Density and Unit Weightof Soils and Calculation of Relative Density

Standard Guide for Testing Inplane Shear Properties of CompositeLaminates E1-1994 R(1994) Standard Test Method for Indicating Moisture in Concrete by thePlastic Sheet Method R(1999) Standard Test Methods for Testing Fiber Ropes Standard Test Method for Elastomer Compatibility of LubricatingGreases and Fluids Standard Test Method for Sulfur in Petroleum Products byEnergy-Dispersive X-Ray Fluorescence Spectrometry Standard Test Methods for Ability of Adhesive Films to Supportor Resist the Growth of Fungi Standard Specification for Polyvinyl Acetate-Based EmulsionAdhesives Standard Test Methods for Liquid Limit, Plastic Limit, andPlasticity Index of Soils Standard Test Methods for Nonmetallic Semi-Conducting andElectrically Insulating Rubber Tapes Standard Test Method for Flexibility Determination of SupportedAdhesive Films by Mandrel Bend Standard Test Method for Deterioration of Geotextiles fromExposure to Ultraviolet Light and Water (XenonArc Type Apparatus) Standard Test Method for Water in Crude Oils by PotentiometricKarl Fischer Titration API Designation: MPMS Chapter 10.7; IP Designation:356/93 Standard Test Method for Viscosity Determinations of UnfilledAsphalts Using the Brookfield Thermosel Apparatus E1-2000 R(2000) Standard Test Methods for Field Measurement of Surface Profileof Blast Cleaned Steel R(1999) Standard Specification for Poly(Vinyl Chloride) Sheet Roofing Standard Test Methods for Direct Moisture Content Measurement ofWood and Wood-Base Materials Supersedes D2016 Along with D4444; E1-1997R(1997) Standard Test Methods for Use and Calibration of Hand- HeldMoisture Meters E1-1998 R(1998) Standard Practice for Measuring the Cure Behavior ofThermosetting Resins Using Dynamic Mechanical Procedures Standard Specification for Asphalt Roof Coatings - Asbestos-Free Standard Test Method for Determining Grit, Lumps, or UndissolvedMatter in Water-Borne Adhesives (Discontinued) Standard Specification for ThermoplasticPolyester (TPES) Materials Replaced by D5927 Standard Test Method for Determination of Carbon Residue (MicroMethod) Standard Specification for n-Butyl Acetate (All Grades) R(2001) Standard Specification for Phenolic Compounds (PF) Standard Test Method for Measuring Apparent Viscosity byCapillary Viscometer at High-Temperature and High- Shear Rates R(1998) Standard Test Method for Analysis of Barium, Calcium, Magnesium,and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry Standard Test Method for Trace Nitrogen in Liquid PetroleumHydrocarbons by Syringe/Inlet Oxidative Combustion and ChemiluminescenceDetection IP Designation: 379/88 Standard Test Method for Grab Breaking Load and Elongation ofGeotextiles R(1996) Standard Specification for Styrene-Maleic Anhydride Materials(S/MA) Standard Test Method for Corrosiveness and Oxidation Stabilityof Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other HighlyRefined Oils Standard Specification for EPDM Sheet Used in Single- Ply RoofMembrane

Standard Test Method for Determination of Water (Moisture)Content of Soil by the Microwave Oven Method Standard Test Method for Total Chlorides in Leather R(1998) Standard Test Methods for Sulfates in Leather (Total, Neutral,and Combined Acid) Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials Standard Guide for Selection and Use of Flat Strapping Materials Standard Test Method for Measuring Viscosity at High Shear Rateand High Temperature by Tapered Bearing Simulator Standard Test Method for Determination of Yield Stress andApparent Viscosity of Engine Oils at Low Temperature E1-2000 Standard Specification for Urea-Formaldehyde Resin Adhesives Standard Specification for Technical Grade Methylene Chloride Standard Test Method for Tearing Strength, Tongue Tear ofLeather Standard Test Method for Stitch Tear Strength of Leather, DoubleHole Standard Specification for Corrugated and Solid Fiberboard SheetStock (Container Grade) and Cut Shapes Standard Test Method for Calculated Cetane Index by FourVariable Equation IP Designation: 380/94 Standard Specification for Filled Compounds ofPolytetrafluoroethylene (PTFE) Molding and Extrusion Materials Standard Test Method for Performing the Sieve Analysis of Coaland Designating Coal Size Replaces ASTM D310- 88, D311-84, D410-84, D431-84;E1-1994 R(1994) Standard Test Method for Determining Apparent Opening Size of aGeotextile Standard Test Methods for Resistance of Adhesive Preparations inContainer to Attack by Bacteria, Yeast, and Fungi Standard Test Method for Flat Particles, Elongated Particles, orFlat and Elongated Particles in Coarse Aggregate Standard Specification for Poly(Methyl Methacrylate) AcrylicPlastic Sheet Standard Test Method for Sediment in Crude Oil by MembraneFiltration API Designation: MPMS (Chapter 10.8) R(1999) Standard Test Methods for Hydrogen Content of Light Distillates,Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear MagneticResonance Spectroscopy Standard Specification for Automotive Spark-Ignition Engine Fuel Standard Test Method for Determination of MTBE, ETBE, TAME,DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by GasChromatography Standard Test Method for Index Puncture Resistance ofGeotextiles, Geomembranes, and Related Products Standard Test Method for Determination of the Ability ofLubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-CycleGasoline Engines Other Than Outb Standard Test Method for Determination of the Tendency ofLubricants to Promote Preignition in Two-StrokeCycle Gasoline Engines Standard Specification for Lubricants for Two-Stroke- CycleSpark-Ignition Gasoline Engines-TC Standard Test Method for Density of Solid Pitch (HeliumPycnometer Method) E1-1999 R(1999)

Standard Specification for Asphalt-Coated Glass-Fiber VentingBase Sheet Used in Roofing Standard Test Method for Insoluble Contamination of HydraulicFluids by Gravimetric Analysis E1-2000 R(2000) (Discontinued) Standard Test Method for Flexibility and Adhesionof Finish on Leather Discontinued 1997 and Replaced by D6182; IHS Notified12/1998; *NOT CURRENT DOCU Standard Test Methods for Elemental Analysis of Lubricant andAdditive Components - Barium, Calcium, Phosphorus, Sulfur, and Zinc byWavelength-Dispersive X-Ray Fluor Standard Test Methods for Water in Crude Oils by CoulometricKarl Fischer Titration API Designation: MPMS Chapter 10.9; IP Designation:386/99 Standard Test Method for Determination of Additive Elements inLubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry Standard Test Method for Qualitative Analysis for Active SulfurSpecies in Fuels and Solvents (Doctor Test) Standard Specification for Low Silicate Ethylene Glycol BaseEngine Coolant for Heavy Duty Engines Requiring a Pre-Charge of SupplementalCoolant Additive (SCA) Standard Test Method for Measurement of Fuel System IcingInhibitors (Ether Type) in Aviation Fuels Standard Test Method for Breaking Strength and Elongation ofTextile Fabrics (Grab Test) Standard Test Method for Breaking Force and Elongation ofTextile Fabrics (Strip Method) Standard Test Methods for Ash Content of Adhesives E1- 1997R(1997) Standard Test Method for Permeability of Leather to Water Vapor Standard Test Method for Colorfastness of Crocking of Leather Standard Test Methods for Lead in Gasoline by X-Ray SpectroscopyIP Designation: 228/79; FSC 9130; Should Be Used Instead of ASTM-D3229, WhichWas Cancelled on August Standard Practice for Performing Accelerated Outdoor Weatheringof Pressure-Sensitive Tapes Using Concentrated Natural Sunlight R(1999) Standard Test Method for Detection of Holes in Medical Gloves Standard Test Method for Determination of Additive Elements,Wear Metals, and Contaminants in Used Lubricating Oils and Determination ofSelected Elements in Base Oil Standard Test Method for Vapor Pressure of Petroleum Products(Mini Method) Standard Classification System for Polyamide-Imide (PAI) Moldingand Extrusion Materials Standard Classification System for Polyetherimide (PEI)Materials Standard Specification for Polymeric Resin Film for ElectricalInsulation and Dielectric Applications Standard Test Method for Moisture Absorption Properties andEquilibrium Conditioning of Polymer Matrix Composite Materials E1 R(1998) Standard Test Method for Measurement of Resin Content and OtherRelated Properties of Polymer Matrix Thermoset Prepreg by Combined Mechanicaland Ultrasonic Methods Standard Test Method for Assessing Distillate Fuel StorageStability by Oxygen Overpressure Standard Specification for Cast Poly(Methyl Methacrylate)Plastic Rods, Tubes, and Shapes Standard Practice for Pictorial Markings for Handling of Goods Standard Test Method for Particulate Contamination in AviationFuels by Laboratory Filtration IP Designation: 423/97 Standard Specification for Pressure-Sensitive Tape forPackaging, Box Closure, and Sealing E1-2000

Standard Specification for Halon 1301, Bromotrifluoromethane(CF3Br) Replaces ES24-93 Standard Specification for Emulsified Refined Coal Tar (MineralColloid Type) Standard Specification for Molding Compounds, ThermosettingE1-1996 Standard Test Method for Determination of Resistance of Leatherto Bleeding Standard Test Method for Determination of Magnesium Sulfate(Epsom Salt) in Leather Standard Practice for Calculation of (Non-Mineral) CombinedTanning Agents and Degree of Tannage Standard Test Method for Shrinkage Temperature of Leather Standard Specification for Stop-Leak Additive for EngineCoolants Used in Light Duty Service Should Be Used Instead of MIL-C-51047B,which Was Cancelled on 11 Septemb Standard Test Method for Tackiness of Finish on Leather Standard Practice for Quality of Wood Members of Containers andPallets E1-1999 Standard Practice for Preparation of Metallographic Specimens Standard Terminology Relating to Methods of Mechanical TestingE1-2000 Standard Terminology Relating to Metallography Standard Test Methods for Rockwell Hardness and RockwellSuperficial Hardness of Metallic Materials Standard Test Methods for Elevated Temperature Tension Tests ofMetallic Materials R(1998) Standard Test Methods for Notched Bar Impact Testing of MetallicMaterials Standard Test Methods for Softening Point of Resins Derived fromNaval Stores by Ring-and-Ball Apparatus Standard Practice for Using Significant Digits in Test Data toDetermine Conformance with Specifications R(1999) (Withdrawn) Standard Test Methods for Chemical Analysis ofSteel, Cast Iron, Open-Hearth Iron, and Wrought Iron Standard Test Methods for Chemical Analysis of Aluminum andAluminum-Base Alloys R(1998) Standard Test Methods for Determining the Inclusion Content ofSteel E1-1998; E2-1999 Standard Test Method for Determination of Copper in UnalloyedCopper by Gravimetry (Withdrawn) Standard Practice for Sampling Steel and Iron forDetermination of Chemical Composition Discontinued 1996; Replaced by E1806 Standard Test Methods for Chemical Analysis of Copper and CopperAlloys (Photometric Methods) R(1996) Standard Test Method for pH of Aqueous Solutions with the GlassElectrode Standard Test Methods for Chemical Analysis of Copper- Nickeland Copper-Nickel-Zinc Alloys R(1996) Standard Test Method for Inspection and Verification ofThermometers Standard Test Method for Surface Burning Characteristics ofBuilding Materials Standard Practice for Sampling Nonferrous Metals and Alloys inCast Form for Determination of Chemical Composition R(1996) Standard Test Method for Laboratory Measurement of AirborneSound Transmission Loss of Building Partitions and Elements Standard Test Methods for Water Vapor Transmission of Materials (Withdrawn) Standard Test Methods for Directional ReflectanceFactor, 45-Deg 0-Deg, of Opaque Specimens by Broad-Band Filter Feflectometry*NOT CURRENT DOCUMENT R(198 Standard Specification for ASTM Hydrometers Standard Test Method for Rapid Indentation Hardness Testing ofMetallic Materials E1-1996 R(1996) Standard Test Methods for Fire Tests of Roof Coverings

Standard Test Method for Indentation Hardness of MetallicMaterials by Portable Hardness Testers E1- 1998; E2-1999 R(1997) Standard Practice for Ultrasonic Pulse-Echo Straight- BeamExamination by the Contact Method R(2001) Standard Test Methods for Fire Tests of Building Constructionand Materials Standard Test Methods for Chemical Analysis of Titanium andTitanium Alloys Standard Practice for Fabricating and Checking Aluminum AlloyUltrasonic Standard Reference Blocks Standard Test Method for Poisson's Ratio at Room Temperature Standard Test Method for Behavior of Materials in a VerticalTube Furnace at 750 Degrees C E1-2000 Standard Test Methods for Conducting Creep, Creep- Rupture, andStress-Rupture Tests of Metallic Materials (Discontinued) Standard Method for Controlling Quality ofRadiographic Testing Replaced by E94 Standard Specification for Gravity-Convection andForced-Ventilation Ovens E1-1995 (Discontinued) Standard Methods of Fire Tests of Door AssembliesE1-1984; E2-1993; Discontinued 1995; Replaced by E2074 Standard Test Method for Surface Flammability of Materials Usinga Radiant Heat Energy Source E1-2001 Standard Practice for Goniophotometry of Objects and Materials Standard Practices for General Techniques of InfraredQuantitative Analysis Standard Specification for Standard Atmospheres for Conditioningand Testing Flexible Barrier Materials R(1998) Standard Terminology of Microscopy E1-2000 R(1999) Standard Practice for Use of the Terms Precision and Bias inASTM Test Methods R(1996) Standard Reference Radiographs for Heavy-Walled (2 to 4 1/2-in.(51 to 114-mm)) Steel Castings Standard Specification for Apparatus for Microdetermination ofCarbon and Hydrogen in Organic and OrganoMetallic Compounds E1-2000 R(1999) Standard Specification for Laboratory Glass Micropipets R(1999) Standard Test Methods for Analysis of Ethylene Glycols andPropylene Glycols Standard Test Method for Water Using Volumetric Karl FischerTitration Standard Practice for Immersed Ultrasonic Examination by theReflection Method Using Pulsed Longitudinal Waves Standard Test Method for Calibration of Thermocouples ByComparison Techniques E1-1996 R(1996) Standard Test Methods for Analysis of Sulfuric Acid Standard Test Methods for Analysis of Hydrochloric Acid Standard Test Method for Optical Emission Spectrometric Analysisof Aluminum and Aluminum Alloys by the Point-To-Plane Technique R(1996) Standard Test Method for Linear Thermal Expansion of SolidMaterials with a Vitreous Silica Dilatometer Standard Practice for Electromagnetic (Eddy-Current) Examinationof Copper and Copper-Alloy Tubes Standard Test Method for Determination of Manganese in ManganeseOres by Pyrophosphate Complexed Permanganate Potentiometric Titration Standard Test Methods for Performance Characteristics ofMetallic Bonded Resistance Strain Gages R(1998) Standard Test Method for Thickness of Thin Foil and Film byWeighing R(1999) Standard Test Method for Chlorine in Organic Compounds by SodiumPeroxide Bomb Ignition

Standard Test Method for Sulfur in Organic Compounds by SodiumPeroxide Bomb Ignition Standard Test Method for Measuring Fast-Neutron Reaction Ratesby Radioactivation of Iron Standard Test Method for Measuring Fast-Neutron Reaction Ratesby Radioactivation of Nickel R(1996) Standard Test Method for Measuring Reaction Rates andFast-Neutron Fluences by Radioactivation of Sulfur-32 (Withdrawn) Standard Definitions of Terms Relating to LiquidPenetrant Inspection Standard Practice for Ultrasonic Examination of LongitudinalWelded Pipe and Tubing Standard Reference Radiographs for Heavy-Walled (4 1/2 to 12-in.(114 to 305-mm)) Steel Castings Standard Test Method for Determining Rate of Air Leakage ThroughExterior Windows, Curtain Walls, and Doors Under Specified PressureDifferences Across the Specimen R Standard Test Methods for Bend Testing of Material for Ductility Standard Test Methods for Chemical Analysis of Caustic Soda andCaustic Potash (Sodium Hydroxide and Potassium Hydroxide) (Withdrawn) Standard Practice for Sampling Industrial ChemicalsR(1996) Standard Practice for Computing the Colors of Objects by Usingthe CIE System Standard Practice for Eddy-Current Examination of Steel TubularProducts Using Magnetic Saturation Standard Reference Radiographs for Tin Bronze Castings (Withdrawn) Standard Test Method for Relative Initial and FinalMelting Points and the Melting Range of Organic Chemicals Standard Test Method for Structural Performance of ExteriorWindows, Curtain Walls, and Doors by Uniform Static Air Pressure DifferenceE1-1998 Standard Test Method for Hydroxyl Groups by PyromelliticDianhydride Esterification Standard Test Method for Measurement of Airborne SoundInsulation in Buildings Standard Test Method of Sharp-Notch Tension Testing ofHigh-Strength Sheet Materials R(1997) Standard Test Method for Macroetching Metals and Alloys Standard Test Methods of Tension Testing of Metallic Foil R(1998) Standard Test Method for Phosphorus in Organic Compounds bySodium Peroxide Bomb Ignition (Withdrawn) Standard Test Methods for Analysis of PhosphoricAcid Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate) Standard Practice for Measuring Coating Thickness byMagnetic-Field or Eddy-Current (Electromagnetic) Test Methods Standard Test Method for Microindentation Hardness of Materials Standard Reference Radiographs for Steel Fusion Welds Standard Test Method for Plane-Strain Fracture Toughness ofMetallic Materials R(1997) Standard Practice for Microetching Metals and Alloys Classification for Rating Sound Insulation R(1999) Standard Test Methods for Solar Energy Transmittance andReflectance (Terrestrial) of Sheet Materials E11993 R(1993) Standard Practice for Fabrication and Control of Steel ReferenceBlocks Used in Ultrasonic Examination (Withdrawn) Standard Specification for Industrial Wire Cloth andScreens (Square Opening Series) Replaced by E2016: 1999 R(1997) (Withdrawn) Standard Test Method for Sulfur in Organic Compoundsby Oxygen Flask Combustion

(Discontinued) Standard Test Methods for Compressive Strength ofLaboratory Constructed Masonry Prisms Replaced by C1388 Standard Test Methods for Analysis of Calcium Chloride Standard Terminology Relating to Quality and Statistics Standard Test Method for Heat of Ablation E1-1996 R(1996) (Discontinued) Standard Test Method for Odor and Taste Transferfrom Packaging Film R(1995) Standard Test Methods for Chemical Analysis of Copper AlloysR(1996) Standard Test Methods for Strength of Anchors in Concrete andMasonry Elements Standard Test Methods for Leaks Using the Mass Spectrometer LeakDetector in the Inside-Out Testing Mode Standard Test Methods for Leaks Using the Mass Spectrometer LeakDetector in the Detector Probe Mode R(2000) Standard Test Methods for Flexural Bond Strength of Masonry Standard Practice for Agencies Performing Nondestructive Testing Standard Test Method for Determining Image Quality in DirectThermal Neutron Radiographic Examination Standard Test Method for Frost Point of Sealed Insulating GlassUnits E1-1999 R(1999) Standard Guide for the Installation Operable Partitions Standard Practice for Flux Leakage Examination of FerromagneticSteel Tubular Products Standard Guide for Dimensional Coordination of RectilinearBuilding Parts and Systems R(1999) Standard Practice for Application of Ceiling Suspension Systemsfor Acoustical Tile and Lay-In Panels in Areas Requiring Seismic Restraint Standard Test Method for Total Mass Loss and Collected VolatileCondensable Materials from Outgassing in a Vacuum Environment R(1999) Standard Test Method for Laboratory Measurement of NoiseReduction of Sound-Isolating Enclosures Standard Test Method for Sharp-Notch Tension Testing withCylindrical Specimens R(1997) Standard Test Method for Dynamic Tear Testing of MetallicMaterials R(1994) Standard Test Method for Optical Emission Spectrometric Analysisof Aluminum and Aluminum Alloys by the Point-To-Plane Technique, NitrogenAtmosphere R(1996) Standard Practice for Evaluating Foreign Odors in PaperPackaging R(1995) Standard Practice for Use of Metric (SI) Units in BuildingDesign and Construction (Committee E-6 Supplement to E380) E1-1999 R(1999) Standard Test Method for Specific Optical Density of SmokeGenerated by Solid Materials Standard Practice for Calculating Absorbed Dose from Gamma or XRadiation Standard Specification for Mercury-In-Glass, MaximumSelf-Registering, Clinical Thermometers Standard Specification for Maximum Permissible Thermal ResidualStress in Annealed Glass Laboratory Apparatus Standard Specification for Disposable Glass Micropipets E1-1996R(1996) Standard Specification for Interchangeable Taper- GroundStopcocks and Stoppers R(1998) Standard Practice for Conducting an Interlaboratory Study toDetermine the Precision of a Test Method Standard Specification for Laboratory Glass Volumetric Apparatus Standard Guide for Selection of Scales for Metric BuildingDrawings E1-1999 R(1999)

Standard Guide for Selection and Use of Neutron- ActivationFoils for Determining Neutron Spectra Employed in Radiation-Hardness Testingof Electronics Standard Guide for Determining Neutron Energy Spectra fromNeutron Sensors for Radiation-Hardness Testing of Electronics Standard Practice for Characterizing Neutron Energy FluenceSpectra in Terms of an Equivalent Monoenergetic Neutron Fluence forRadiation-Hardness Testing of Electron Standard Test Method for Cohesion/Adhesion of SprayedFire-Resistive Materials Applied to Structural Members (Withdrawn) Standard Practice for Installation of Storm Windows,Replacement Windows, Multi-Glazing, Storm Doors, and Replacement Doors Standard Test Method for Measuring Vibration-Damping Propertiesof Materials Standard Specification for the Classification of the Durabilityof Sealed Insulating Glass Units Standard Specification for Crucibles, Ignition, Laboratory,Metal E1-1997 R(1996) Standard Specification for Disposable Glass Micro BloodCollection Pipets R(1996) Standard Practices for Mounting Test Specimens During SoundAbsorption Tests Standard Guide for Measurement of Gases Present or GeneratedDuring Fires Standard Test Method for Crack Strength of Slow-Bend PrecrackedCharpy Specimens of High-Strength Metallic Materials R(1997) Standard Test Method for Fire Tests of Through- Penetration FireStops Standard Practice for Determining Resistance of Solar CollectorCovers to Hail by Impact with Propelled Ice Balls R(1996) Standard Specification for Phase Change-Type Disposable FeverThermometer for Intermittent Determination of Human Temperature Standard Guide for Modular Coordination of Clay and ConcreteMasonary Units R(1999) Standard Specification for Structural Film Adhesives forHoneycomb Sandwich Panels E1-2000 Standard Guide for Reflected-Light Photomicrography Standard Test Methods for Estimating the Largest Grain Observedin a Metallographic Section (ALA Grain Size) Standard Specification for Serological Pipet, Disposable PlasticR(1998) Standard Specification for Glass Volumetric (Transfer) PipetsR(1999) Standard Practice for Detection and Evaluation ofDiscontinuities by the Immersed Pulse-Echo Ultrasonic Method UsingLongitudinal Waves Standard Classification for Acoustically Absorptive MaterialsApplied by Trowel or Spray E1-1997 R(1997) Standard Test Methods for Estimating the Depth ofDecarburization of Steel Specimens E1-2001 Standard Specification for Pharmaceutical Glass Graduates Standard Specification for Common Laboratory Glass Funnels Standard Specification for Liquid Caustic Soda (Sodium HydroxideSolution) R(1997) Standard Specification for Muriatic Acid (Technical GradeHydrochloric Acid) Standard Specification for Sampling and Testing of Reusable LaboratoryGlassware R(1996) Standard Test Method for Measurement of Surface Layer Thicknessby Radial Sectioning R(1998) Standard Test Method for Thermal Conductivity of Solids by Meansof the Guarded-Comparative- Longitudinal Heat Flow Technique Standard Guide for Installing Bonded Resistance Strain GagesR(1998)

Standard Test Method for Optical Emission Spectrometric Analysisof Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-To-Plane,Unipolar Self- Initiating Ca Standard Classification for Acoustical Ceiling Products Standard Practice for Angle Resolved Optical ScatterMeasurements on Specular or Diffuse Surfaces Standard Guide for Computed Tomography (CT) Imaging Standard Specification for Caustic Potash; Solid (PotassiumHydroxide; Solid) Standard Practice for Computed Tomographic (CT) Examination Standard Guide for Including Government Procurement Requirementsin ASTM Documents R(1999) Standard Practice for Radiographic Examination Guide for Recommended Uses of Photoluminescent Safety MarkingsFSC 9390; Should Be Used Instead of MIL-L- 3891B, Which Was Cancelled onOctober 16, 2000 Standard Test Method for Photopic Luminance of Photoluminescent(Phosphorescent) Markings FSC 9390; Should Be Used Instead of MIL-L-3891B,Which Was Cancelled on Octo Standard Test Method for Compressibility and Recovery of GasketMaterials Standard Test Methods for Sealability of Gasket Materials Standard Test Method for Rate of Grease Penetration of FlexibleBarrier Materials (Rapid Method) R(1998) Standard Terminology Relating to Resilient Floor Coverings Standard Test Method for Indentation of Resilient Floor Tiles(McBurney Test) E1-2000 R(2000) Standard Test Method for Electrical Resistance of ConductiveResilient Flooring Reinstated Standard Test Methods for Tension Testing of Nonmetallic GasketMaterials (Discontinued) Standard Practice for Sampling Particulates fromMan-Accessible Storage Vessels for Aerospace Fluids by Vacuum EntrainmentTechnique (General Method) R Standard Test Method for Bird Impact Testing of AerospaceTransparent Enclosures R(1999) Standard Test Method for Measuring Thickness of Resilient FloorCovering with Foam Layer Standard Practice for Safe Handling of Solvent Cements, Primers,and Cleaners Used for Joining Thermoplastic Pipe and Fittings R(1999) Standard Specification for Corrugated Polyethylene (PE) Pipe andFittings Standard Test Method for Wear Layer Thickness of Resilient FloorCoverings by Optical Measurement Standard Terminology Relating to Plastic Piping Systems Standard Specification for Hardened Steel Washers R(2000) Standard Specification for Hardened Steel Washers (Metric)R(2000) Standard Specification for Threaded Chlorinated Poly(VinylChloride) (CPVC) Plastic Pipe Fittings, Schedule 80 Standard Specification for Socket-Type Chlorinated Poly(VinylChloride) (CPVC) Plastic Pipe Fittings, Schedule 40 Standard Specification for Chlorinated Poly (Vinyl Chloride)(CPVC) Plastic Pipe Fittings, Schedule 80 Standard Specification for Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Pipe, Schedules 40 and 80 Standard Specification for Chlorinated Poly(Vinyl Chloride)(CPVC) Plastic Pipe (SDR-PR) Standard Practice for Nondestructive Pull Testing of Wire BondsR(2001) Standard Test Methods for Measuring Pull Strength ofMicroelectronic Wire Bonds R(2001) Standard Specification for Nonferrous Nuts for General Use

Standard Specification for Nonferrous Nuts for General Use(Metric) Standard Specification for Nonferrous Bolts, Hex Cap Screws, andStuds for General Use Standard Specification for Nonferrous Bolts, Hex Cap Screws, andStuds for General Use (Metric) Standard Specification for Elastomeric Seals (Gaskets) forJoining Plastic Pipe Standard Specification for Thermoplastic Well Casing Pipe andCouplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80 Standard Test Method for Total Immersion Corrosion Test forAircraft Maintenance Chemicals Standard Specification for Solvent Cements for ChlorinatedPoly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings Standard Test Method for Measuring Dose for Use in LinearAccelerator Pulsed Radiation Effects Tests Standard Test Method for Size of Resilient Floor Tile by DialGage Method Standard Specification for Alloy Steel Eyebolts Standard Specification and Test Methods for Metallic MedicalBone Screws E1-2001 Standard Specification for Unalloyed Tantalum for SurgicalImplant Applications (UNS R05200, UNS R05400) Standard Specification for Carbon and Alloy Steel ExternallyThreaded Metric Fasteners Standard Specification for Carbon and Alloy Steel ExternallyThreaded Metric Fasteners Standard Practice for Insertion of Flexible Polyethylene Pipeinto Existing Sewers R(2000) Standard Specification for Stainless Steel Bolts, Hex CapScrews, and Studs Standard Specification for Stainless Steel Nuts Standard Test Methods for Determining the Mechanical Propertiesof Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric) Standard Test Method for Adhesion of Gasket Materials to MetalSurfaces Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L)Lube Oil Dispensing E1-1994 R(1994) Standard Specification for Leather Protectors for RubberInsulating Gloves and Mittens Standard Specification for Modular Gage Boards Standard for Shipbuilders and Marine Paints and CoatingsProduct/Procedure Data Sheet Standard Specification for Gage Piping Assemblies R(1998) Standard Test Method for Sorbent Performance of Adsorbents Standard Specification for Stainless Steel Metric Bolts, Screws,and Studs Standard Specification for Smooth-Wall Poly (VinylChloride)(PVC) Plastic Underdrain Systems for Highway, Airport, and SimilarDrainage R(2000) Standard Specification for Wildcats, Ship Anchor Chain R(1998) Standard Specification for Surface Discontinuities of Bolts,Screws, and Studs, Inch and Metric Series Standard Test Method for Stress Crazing of Transparent Plastics Standard Specification for Poly(Vinyl Chloride) (PVC) ProfileGravity Sewer Pipe and Fittings Based on Controlled Inside Diameter Standard Specification for Surface Discontinuities of Nuts, Inchand Metric Series

Standard Test Method for Specific Optical Density of SmokeGenerated by Solid Materials for Aerospace Applications Standard Specification for Alloy Steel Socket Button and FlatCountersunk Head Cap Screws Standard Specification for Stainless Steel Metric Nuts Standard Specification for Style 1 Stainless Steel Metric Nuts Standard Specification for Thrusters, Tunnel, PermanentlyInstalled in Marine Vessels R(1998) Standard Specification for Washers, Steel, Plain (Flat),Unhardened for General Use Standard Practice for Mechanical Symbols, Shipboard - Heating,Ventilation, and Air Conditioning (HVAC) Standard Specification for Hot Water Sanitizing CommercialDishwashing Machines, Single Tank, Conveyor Rack Type Standard Specification for Heat-Sanitizing CommercialDishwashing Machines, Multiple Tank, Conveyor Rack Type Standard Specification for Hot Water Sanitizing CommercialDishwashing Machines, Multiple Tank, Rackless Conveyor Type Standard Specification for Commercial Dishwashing Racks R(1998) Standard Specification for Filter Units, Air Conditioning:Viscous-Impingement Type, Cleanable R(1990) Standard Specification for Stainless Steel Socket Button andFlat Countersunk Head Cap Screws Standard Specification for Stainless Steel Socket Button andFlat Countersunk Head Cap Screws (Metric) Standard Specification for Stainless Steel Socket-Set Screws Standard Specification for Stainless Steel Socket Set Screws(Metric) Standard Test Method for Agar Diffusion Cell Culture Screeningfor Cytotoxicity E1-2001 R(2001) Standard Specification for Stainless Steel Billet, Bar, and Wirefor Surgical Instruments Standard Specification for Letters and Numerals for ShipsR(1998) Standard Specification for Alloy Steel Socket Set Screws Standard Specification for Alloy Steel Socket Set Screws(Metric) Standard Specification for Commercial Food Waste DisposersR(1998) Standard Specification for Noncarbonated MechanicallyRefrigerated, Beverage Dispenser (Visible Product) Standard Specification for Minimum Performance and SafetyRequirements for Resuscitators Intended for Use with Humans R(1999) Standard Definitions of Terms Relating to Hemostatic ForcepsR(1996) Standard Practice for Inspection of Marine Surface Preparationand Coating Application Standard Specification for Mixing Machines, Food, Electric Standard Specification for Gong, Sound Signaling R(1996) Standard Specification for Compressible-Washer-Type DirectTension Indicators for Use with Structural Fasteners [Metric] Standard Specification for Medical and Surgical Suction and DrainageSystems R(2000) Standard Specification for Rigid Laryngoscopes for TrachealIntubation - Hook-On Fittings for Laryngoscope Handles and Blades with Lamps Standard Specification for Feeders, Detergent, Rinse Agent, andSanitizing Agent for Commercial Dishwashing and Glasswashing Machines

Standard Specification for Dispensers, Powdered Iced Tea Standard Specification for General Workmanship and PerformanceMeasurements of Hemostatic Forceps R(1996) Standard Specification for Inserted and Noninserted SurgicalScissors R(1998) Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated(Galvanized) Welded, for Fence Structures Standard Specification for Non-Metallic Expansion Joints R(1998) Standard Terminology Relating to Product Counterfeit ProtectionSystems Standard Guide for the Measurement of Single Event Phenomena(SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices Standard Specification for Cooker, Steam R(1997) Standard Specification for Cuffed and Uncuffed Tracheal TubesE1-1997 Standard Specification for Metal, Expanded, Steel R(1997) Standard Test Method for Performance of Griddles Standard Specification for Brick, Insulating, High Temperature,Fire Clay R(1997) Standard Practice for Use of SI (Metric) Units in MaritimeApplications (Committee F-25 Supplement to IEEE/ASTM SI 10) Standard Specification for Manually Operated Fueling Hose ReelsR(1996) Standard Specification for Ovens, Microwave, Electric R(1999) Standard Specification for Pressure-Reducing Valves for WaterSystems, Shipboard Standard Guide for Selection of Security Technology forProtection Against Counterfeiting, Alteration, Diversion, Duplication,Simulation, and Substitution (CADDSS) o Standard Specification for Kettles, Steam-Jacketed, 20 to 200gal (75.7 to 757 L), Floor or Wall Mounted, Direct Connected, Gas Fired andElectric Fired Standard Specification for Solid Vinyl Floor Tile Standard Guide for Performance of an Ice Rescuer - Level 11 Standard Specification for Automatic Shut-Off Valves (Also Knownas Excess Flow Valves, EFV) for Air or Nitrogen Service Standard Practice for Atmospheric Environmental Exposure Testingof Nonmetallic Materials Standard Terminology Relating to Corrosion and Corrosion Testing Standard Practice for Determining Resistance of SyntheticPolymeric Materials to Fungi Standard Practice for Determining Resistance of Plastics to BacteriaR(1996) (Withdrawn) Standard Practice for Operating Light- ExposureApparatus (Carbon-Arc Type) with and without Water for Exposure ofNonmetallic Materials (Withdrawn) Standard Practice for Operating Light- ExposureApparatus (Xenon-Arc Type) with and without Water for Exposure of NonmetallicMaterials Replaced by G155:1 Standard Test Methods of Detecting Susceptibility toIntergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys Standard Practice for Determining Algal Resistance of PlasticFilms Standard Test Method for Exfoliation Corrosion Susceptibility in2XXX and 7XXX Series Aluminum Alloys (EXCO Test) Standard Test Method for Determining Susceptibility toStress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products Standard Guide for Three Methods of Assessing Buried Steel Tanks

Standard for Use of the International System of Units (SI): theModern Metric System Revision and Redesignation of ANSI/IEEE Std 268-1992 andASTM E380 (Active/Historical) NATO QualityAssurance Requirements for Software Development Edition 1 (03.93) (SupersedesAQAP-13) (Active/Historical) NATO Guidefor a Government Quality Assurance Programme Edition 1 (03.93) (SupersedesAQAP-10) TP-71b Solder Wicking (WaveSolder Technique) Test Procedure for Electrical Connectors and SocketsRevision of EIA-364-71A; Errata July 13, 2001 Guideline on the Use andApplication of Cpk R(2001) (Withdrawn) FOTP-170 Cable CutoffWavelength of Single- Mode Fiber by Transmitted Power Diminishing Manufacturing Sourcesand Material Shortages (DMSMS) Management Practices FOTP-46 Spectral AttenuationMeasurement for Long- Length, Graded-Index Optical Fibers Revision of EIA455-46 FOTP-51 Pulse DistortionMeasurement of Multimode Glass Optical Fiber Information TransmissionCapacity Revision of EIA-455-51 FOTP-53 Attenuation by SubstitutionMeasurement for Multimode Graded-Index Optical Fibers or Fiber AssembliesUsed in Long Length Communications Systems Revision of E FOTP-173 Coating GeometryMeasurement for Optical Fiber Side-View Method (Withdrawn) Test Procedure forAirborne Sound Measurements on Rotating Electric Machinery Correction 1973R(1986) (Withdrawn) ReferenceDesignations for Electrical and Electronics Parts and Equipments ANSIY32.16-75; Replaces CSA Z99.2-77 (ANSI/IEEE) R(1988) (Withdrawn) Standard Definitionsof Terms Relating to Fiber Optics (Withdrawn) General Requirementsfor Synchronous Machines (ANSI/IEEE) (Withdrawn) Printed BoardDrawings in Digital Form R(1993) (Withdrawn) Electronic DesignData Description for Printed Boards in Digital Form Requirements for Electronic GradeSolder Alloys and Fluxed and Non-Fluxed Solid Solders for ElectronicSoldering Applications Fluorescent Lamps - Rapid-StartTypes - Dimensional and Electrical Characteristics Includes SupplementsC78.1a-1992; C78.1c-1994; C78.1d-1995; C78.1e-1996: Replaces P Fluorescent Lamps - Preheat-StartTypes - Dimensional and Electrical Characteristics Includes SupplementsC78.2a-1991; C78.2b-1992; C78.2c-1993; C78.d-1994; C78.2e-19 Electrical Lamp Bases IncludesSupplements C81.61a- 1993; C81.61b-1994; C81.61c-1995; C81.61d1995;C81.61e-1996; C81.61f-1996; C81.61g-1996; C81.61h- 1996; C81.61j-1 Industrial Control and SystemsEnclosures R(2001) (Withdrawn) Initial Attack FireApparatus; Tentative Interim Amendment - 1991 Incorporated into NFPA 1901 (Withdrawn) Mobile Water SupplyFire Apparatus; Tentative Interim Amendment - 1991 Incorporated into NFPA1901 (Withdrawn) Aerial Ladder andElevating Platform Fire Apparatus; Errata - 1991, Tentative Interim Amendment- 1991 Incorporated into NFPA 1901 Scientific and Technical Reports - Elements, Organization, andDesign

(Withdrawn) Descriptive Details for Food Service EquipmentStandards

(Cancelled) Standard Words for Test Paragraphs for Tube Fittingsand Tube Assemblies R(1991) Deicing/Anti-Icing Fluid, Aircraft, SAE Type I (Cancelled) Compound, Carbon Removing, Orthodichlorobenzene forEngine Parts Steel Cleanliness, Premium Aircraft-Quality Magnetic ParticleInspection Procedure Thread Compound, Anti-Seize, Graphite-Petrolatum (Cancelled) Magnetic Particle Inspection (Cancelled April 1996,Superseded by ASTM E1444) R(1992) Inspection Material, Penetrant Should Be Used Instead ofMIL-I-25135, Which Was Cancelled on 13 March 1998 (Noncurrent) Coating Material, Silicone Resin 205 Degrees C (400Degrees F) Cure (Noncurrent) Silicone Rubber Extreme Low-Temperature Resistant45 - 55 Reaffirmed Noncurrent April 2001 R(1994) (Noncurrent) Magnesium Alloy, Sheet and Plate 2.0Th - 0.78MnSolution Heat Treated, Cold Worked, and Precipitation Heat Treated UNS M13210 (Noncurrent) Tin Bronze Castings Sand and Centrifugal 87.5Cu -10Sn - 2Zn as Cast (Noncurrent) Titanium Alloy, Sheet and Strip 8Mn Annealed, 110ksi (758 MPa) Yield Strength UNS R56080 Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed UNS G10100 Steel Tubing, Welded 0.13 Carbon, Maximum Annealed UNS G10100 (Noncurrent) Wire, Carbon Steel 0.60 - 0.75C Hardened andTempered (Noncurrent) Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo(0.28 - 0.36C) (SAE 4330 Modified) Annealed UNS J23260 Steel, Corrosion Resistant, Investment Castings 16Cr - 4.1Ni -0.28Cb - 3.2Cu Homogenization and Solution Heat Treated or Homogenization,Solution, and Precipitation Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni -0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H1100) 130 ksi (896MPa) Tensile Strength UNS J Steel, Corrosion Resistant, Investment Castings 15Cr - 4.6Ni -0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable UNS J92110 Steel, Corrosion Resistant, Wire 17Cr - 7.1Ni - 1.1AlCold-Drawn, Precipitation-Hardenable UNS S17700

(Noncurrent) Alloy Welding Wire, Corrosion and Heat Resistant75Ni - 15.5Cr - 8.0Fe Iron-Nickel Alloy, Heat Resistant, Bars, Wire, Forgings, andRings 44Fe - 18.5Cr - 35.5Ni - 1.1Si Solution Heat Treated UNS N08330 Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings,Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti 0.006B - 0.30V ConsumableElectrode Melted 1800 Degrees F (Noncurrent) Welding Electrodes, Covered, Corrosion and HeatResistant Steel 16.5Cr - 4.5Ni - 2.9Mo - 0.10N UNS W35010 Steel, Corrosion and Heat Resistant, Flat Wire 15Cr - 25.5Ni -1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 Degrees F (982 Degrees C) SolutionTreated, Cold Drawn or Cold Roll Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni -2.3Mo - 1.1Al Vacuum Melted UNS S13889 Nickel, Corrosion and Heat Resistant, Sheet and Strip ThoriaDispersion Strengthened 2.2Th02 UNS N03260 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, andRings 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or VacuumInduction Melted Annealed UN Nickel Alloy, Corrosion and Heat Resistant, Plate 54Ni - 22Cr -12.5Co - 9.0Mo - 1.2Al Annealed UNS N06617 Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni- 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum InductionMelted Annealed UNS N06617 Nickel, Corrosion and Heat Resistant, Bars, Forgings, andExtrusions Thoria Dispersion Strengthened 2.2ThO2 Stress-Relieved UNS N03260 Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr - 1.8Ni - 0.40Mo- 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum Remelted Normalized andTempered Steel, Bars, Forgings, and Tubing 0.50Cr - 0.55Ni - 0.20Mo (0.13- 0.18C) (SAE 8615) UNS G86150 Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.15 -0.20C) (SAE 4617) UNS G46170 Steel Bars and Forgings, Carburizing 1.8Ni - 0.25Mo (0.17 -0.22C) (SAE 4620) UNS G46200 Steel, Bars and Forgings 0.80Cr - 1.8Ni - 0.25Mo (0.35 - 0.40C)(4337) UNS G43370 (Noncurrent) Steel Bars and Forgings 0.50Cr (0.98 - 1.10C) (SAE50100) for Bearing Applications UNS G50986 Steel, Sheet, Strip, and Plate 0.95Cr - 0.22V (0.48 - 0.53C)(SAE 6150) UNS G61500 (Noncurrent) Steel Bars and Forgings 5.0Cr - 1.3Mo - 0.50V (0.38- 0.43C) (Noncurrent) Steel Sheet, Strip, and Plate 1.0Cr - 7.5Ni - 4.5Co- 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Melted, Annealed(UNS K91313) (Cancelled) Rings, Sealing, Phosphonitrilic (FX) FluoroelastomerHigh-Temperature-Fluid Resistant 65-75 (Cancelled) Rings, Sealing, Phosphonitrilic (FX) FluoroelastomerHigh-Temperature-Fluid Resistant 75-85

(Cancelled) Rings, Sealing, Phosphonitrilic (FZ) FluoroelastomerHigh- Temperature-Fluid Resistant (Cancelled) Rings, Sealing, Ethylene Propylene (EPM) RubberPhosphate Ester Hydraulic Fluid Resistant 75 85 (Noncurrent) Balls, Low-Chromium, High-Carbon Steel Hardened andTempered Coating, Corrosion Preventative, Polyurethane for AircraftIntegral Fuel Tanks for Use to 250 Degrees F (121 Degrees C) FSC 8030 (R) Fitting, Tee, Standard and Reducer, Bulkhead and InternalPort on Run, Flareless FSC 4730 (Noncurrent) Sealing Compound, Polysulfide, AcceleratorRequired, for Aircraft Structures FSC 8030; Should Be Used Instead ofMIL-S-7124B, Which Was Cancelled on 27 S Sealing Compound, Polysulfide Type, Low Temperature Curing,Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities Should be usedinstead of MIL-S-83318, which was (R) Fitting, Tee, Standard and Reducer, Bulkhead on Run,Flareless FSC 4730 (R) Fitting, Elbow, 90 Degree, Standard and Reducer, FlarelessFSC 4730 (R) Fitting, Tee, Standard and Reducer, Flareless FSC 4730 (R) Fitting, Cross, Standard and Reducer, Flareless FSC 4730 (R) Fitting, Union, Standard and Reducer, Bulkhead, FlarelessFSC 4730 (R) Fitting, Elbow, 90 Degree, Standard and Reducer, Bulkhead,Flareless FSC 4730 (R) Fitting, Tee, Standard and Reducer, Bulkhead on Side,Flareless FSC 4730 (R) Fitting, Elbow, 45 Degree, Standard and Reducer, FlarelessFSC 4730 (R) Fitting, Tee, Standard and Reducer, Flared FSC 4730 Gasket, Metal O-Ring Corrosion and Heat Resistant SteelProcurement Specification for FSC 5330 (Cancelled) Deicing System, Pneumatic Boot, Aircraft, GeneralSpecification for (R) Gasket - Metal O-Ring, .035 Tube X .006 Wall, Cres - UNSS32100 FSC 5330 (R) Gasket - Metal O-Ring, .062 Tube X .006 Wall, Cres - UNSS32100 FSC 5330 (R) Gasket - Metal O-Ring, .062 Tube X .010 Wall, Cres - UNSS31200 FSC 5330 (R) Gasket - Metal O-Ring, .094 Tube X .006 Wall, Cres - UNSS31200 FSC 5330

(R) Gasket - Metal O-Ring, .094 Tube x .010 Wall, Cres - UNSS31200 FSC 5330 (R) Gasket - Metal O-Ring, .125 Tube x .010 Wall, Cres - UNSS32100 FSC 5330 (R) Bolt, Machine - Steel, Diffused Nickel - Cadmium Plated,Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 ksi min,.2500-28 UNJF-3A FSC 5306 (R) Nut, Plain, Hexagon, Check - UNS S66286, 130ksi min, SilverPlated FSC 5310; UNS S66286 (R) Nut, Slotted, Hexagon, Shear - UNS S66286, 130 ksi min FSC5310 (R) Nut, Slotted, Hexagon, Shear - Silver Plated, UNS S66286,130 ksi min FSC 5310 (R) Gasket - Metal O-Ring, .035 Tube X .006 Wall, Silver Plated,Cres - UNS S32100 FSC 5330 (R) Gasket - Metal O-Ring, .062 Tube X .006 Wall, Silver Plated,Cres - UNS S32100 FSC 5330 (R) Gasket - Metal O-Ring, .062 Tube X .010 Wall, Silver Plated,Cres - UNS S32100 FSC 5330 (R) Gasket - Metal O-Ring, .094 Tube X .010 Wall, Silver Plated,Cres - UNS S32100 FSC 5330 (R) Gasket - Metal O-Ring, .125 Tube X .010 Wall, Silver Plated,Cres - UNS S32100 FSC 5330 (R) Bolt, Machine - Steel, Diffused Nickel-Cadmium Plated,Hexagon Head, UNS K14675, 195 ksi min, .375024 UNJF-3A FSC 5306; UNS K14675 (Cancelled) Thermal Anti-Icing Equipment, Wing and Empennage Bearing, Ball, Rod End, Double Row, Precision, Solid Shank,Self-Aligning, Airframe, Type I, -65 Degrees to 300 Degrees F FSC 3110 Bearing, Ball, Rod End, Double Row, Precision, External Thread,Self-Aligning, Airframe, Type II, -65 Degrees to 300 Degrees F FSC 3110 Bearing, Ball, Rod End, Double Row, Precision, Hollow Shank,Self-Aligning, Airframe, Type III, -65 Degrees to 300 Degrees F FSC 3110 Bearing, Ball, Rod End, Double Row, Precision, Internal Thread,Self-Aligning, Airframe, Type IV, -65 Degrees to 300 Degrees F FSC 3110 Coupling Assembly, Hydraulic, Self-Sealing, Quick Disconnect,Flared Fitting to Internal Thread Boss FSC 4730; Should Be Used Instead ofMS24333 Coupling Assembly, Hydraulic, Self-Sealing, Flareless Fitting toInternal Thread Boss FSC 4730; Should Be Used Instead of MS24334 Strap, Tiedown, Electrical Components, Adjustable,Self-Clinching, Plastic, Type I, Class 1 FSC 5975; Should Be Used for NewDesign Instead of MS3367, Which Was Inact Duct Assembly, Ground, Conditioned Air, Insulated, Flexible (Cancelled) Minimum Performance Criteria for Falling ObjectProtective Structure (FOPS) January 1981; Cancellation Notice; Superseded byISO 3449 (Cancelled) Turn Signal Flashers April 1993; Cancellation Notice

(Cancelled) Small Spark Ignition Engine Test Code June 1984;Cancellation Notice; Superseded by J 1349 R(1988) (Cancelled) Capacity Rating - Loader Bucket R(1985) (Cancelled) (R) Vehicular Hazard Warning Flashers, Standard June1993; Cancellation Notice (Cancelled) Labeling of ROPS and FOPS and OPS, Standard January1991; Cancellation Notice Guide to Safety in Paint Application Editorial Changes July 1,1995 (Steel Structures Painting Manual, Ch 5 Paint Application Specs.) UL Standard for Safety Ice Makers Seventh Edition; Reprint withRevisions Through and Including June 28, 2001 UL Standard for Safety Pipe Connectors for Petroleum Productsand LP-Gas Eighth Edition; Reprint with Revisions Through and Including08/17/2001 (Withdrawn) UL Standard for Safety Electric Air Heaters SecondEdition; December 3, 1991, Bulletin April 18, 1990 UL Standard for Safety Diesel Engines for Driving CentrifugalFire Pumps Third Edition; Reprint with Revisions Through and Including June20, 2001 UL Standard for Safety Fire Test of Roof Deck ConstructionsThird Edition; Reprint with Revisions Through and Including 03/17/2000 UL Standard for Safety Tests for Sharpness of Edges on EquipmentFourth Edition Relief Valves for Hot Water Supply Systems FirstEdition; CSA 4.4-M99; CSA 4.4A-2000

(Inactive)Insert, Molded-in, CSK Clearance Hole, Sandwich Panel, Al Alloy and CRES,Metric (Superseded October 1991 Use NA 0235 and NA 0236 for Description ofStat (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2) StandardSpecification for Turnbuckles, Swaged, Welded, Forged R(2001) StandardSpecification for Valve Locking Devices R(2001) StandardSpecification for Gypsum Wallboard Standard TestMethods for Evaluating Properties of Wood-Base Fiber and Particle PanelMaterials Standard TestMethod for Foaming Characteristics of Lubricating Oils IP Designation:146/2000; British Standard 5092 StandardSpecification for Brass Wire Standard Guidefor Preparation of Zinc-Coated (Galvanized) Steel Surfaces for PaintingE1-2001 R(2001) Gas Unit Heater and Gas-Fired Duct Furnaces FirstEdition; CGA 2.6-M96; Addenda Z83.8a-1998; Addenda Z83.8b-2000; CorrectedReplacement June 04 2001 Knob, Control, Short Bar, Metal and Plastic FSC 5355 Knob Control, Bar, Metal and Plastic FSC 5355 Loop, Strap Fastener (Footman's Loop) FSC 5340

Knob-Round, Illuminated and Non-Illuminated, Small FSC5355 Knob - Pointer Illuminated and Non-Illuminated FSC5355 Knob - Round Illuminated and Non-Illuminated, SmallFSC 5355 (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5) Clevis, Rod End-Plain, Wide and Narrow Forks FSC 5340 Dial, Control, Multi-Turn Counters GeneralSpecification for FSC 5355 Buckle, Spring Action FSC 5340 Knobs, Control, Bar, Plastic FSC 5355 (Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994) (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5) (Inactive)Screw-Machine, Non Magnetic High Temperature, Structural, 100 Degree FlushHead (Rev. 5) (Inactive)Pin, Flat Head Hi-Shear Rivet, Close Tolerance, 1200 Degrees F (Rev. 1) Knob, Control, Crank, Metal FSC 5355 Addenda to MH1-1997 Pallets, Slip Sheets, and OtherBases for Unit Loads (Inactive)Pin, Hi-Shear Rivet, 1200 Degrees F (Rev. 2) Addenda to ASME B30.16-1998 Overhead Hoists (Underhung) (Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive) RodEnd, Threaded, Alloy Steel, Flash Welding Type (Rev. 7) (Inactive)Bolt, Close Tolerance, Spline Drive, Alloy Steel, 1800 MPa, Metric (SeeNAS380 for Description of Status Notes) (Rev. 2) (Inactive)Nut, Cylinder Lock (Rev. 5) (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2)

(Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994) (Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994) (Inactive)Bolt - Shear, Close Tolerance (Superseded - February 1989 Use NAS 6203 ThruNAS 6220) (Rev. 18) (Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition of Drawing Status Notes See NAS 380) (Rev. 3) (Inactive)Collar, Hi-Shear Rivet, 1200 Degrees F (Rev. 1) (Inactive)Collar (High Strength) High -- Shear Rivet (Rev. 6) (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Bolt, Close Tolerance, Spline Drive, Alloy Steel, 1550 MPa, Metric (forDescription of Status Notes See NAS380) (Rev. 2) (Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994) (Inactive)Pin, 100 Degree Csk. Head Hi-Shear Rivet, Close Tolerance, 1200 Degrees F(Rev. 1) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Post, Electrical - Mechanical Equipment (See NAS 1831, for Description ofStatus Notes, See NAS 380) (Rev. 2) (Inactive)Screw - Hex Head, Recessed, Full Thread Use NAS 1801. For Description ofStatus Notes See NAS 380; Rev. 7 (Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994) (Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition of Drawing Status Notes See NAS 380) (Rev. 3) (Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994) (Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994) (Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition of Drawing Status Notes See NAS 380) (Rev. 3) (Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5) (Inactive)Knob Control 3/4 Spherical (Use NAS 380) (Rev. 6)

(Inactive)Screw, Machine, Aircraft, Pan Head, Phillips Recess, 160,000 psi Tensile(Superseded - November 1983; Use NAS 7700 Thru NAS 7706) (Rev. 5) (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2) (Inactive) Tee- Universal - Flareless (Rev. 2) (Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994) (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2) (Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994) Addenda to B31.4-1998 Pipeline Transportation Systemsfor Liquid Hydrocarbons and Other Liquids (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2) (Inactive)Nut, Self-Locking, Plate-One Lug, Low Height, C'Bore, Reduced Rivet Spacing(Rev. 10) (Inactive)Tube Assembly - Control Steel, with Flash Welded and Threaded Rod-Ends (Rev.3) (Inactive)Post, Electrical- Mechanical Equipment Swage Type, Metric (Rev. 2) (See NA0213) (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Tube Assembly - Control Steel with Flash Welded Clevis and Threaded Rod-Ends(Rev. 3) (Inactive)Rivet-Hi-Shear, 100 Degree Head Interference Fit, Titanium Alloy (Rev. 1)R(1994) (Inactive)Stylus-100 Degree Flat Head Gage (Rev. 1) (Inactive)Connector, Receptacle, Electrical, Narrow Flange Mount, Bayonet Coupling,Conductive Finish (Superseded - August 1979, Use MS3470) (Rev. 1) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Control Rod and Tube Assembly 1/4-28 UNF-3A Thread (Rev. 2) (Inactive)Control Rod and Tube Assembly .3125-24UNF- 3A Thread (Superseded - August1954 for Definition of Drawing Status Notes See NAS 380) (Rev. 3) (Inactive)Insert, Molded-in, CSK Clearance Hole, Sandwich Panel, Al Alloy and CRES,Metric (Superseded October 1991 Use NA 0235 and NA 0236 for Description ofStat (Inactive)Bolts - Internal Wrenching Use MIL-B-7838; Rev. 6

(Inactive) Bolt,100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990 Use NAS1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Bolt, 100 Degree Flush Head Alloy Steel, 160,000 psi (After April 30, 1990Use NAS 1580, for Description of Status Notes See NAS 380) (Rev. 13) (Inactive)Rivet-Hi-Shear, Flat Head Interference Fit, Titanium Alloy (Rev. 1) R(1994) (Inactive)Elbow - Universal 90 Degree - Flareless (Rev. 1) (Inactive) Cap- Protective, Flanged Fitting (Rev. 3) Electric Lamps: Guidelines for Low Pressure Sodium Lamps Rigid Steel Conduit - Zinc Coated (GRC) StandardSpecification for Perforated-Plate Sieves for Testing Purposes R(2001) StandardSpecification for Concrete Aggregates StandardPractice for Surface Preparation of Aluminum Alloys to Be Adhesively Bondedin Honeycomb Shelter Panels E1-2001 StandardPractice for Filtered Open-Flame Carbon-Arc Exposure Apparatus of Paint andRelated Coatings StandardSpecification for Naval Brass Rod, Bar, and Shapes StandardPractice for Selecting Bolting Lengths for Piping System Flanged JointsR(2001) StandardSpecification for Brass Plate, Sheet, Strip, and Rolled Bar StandardSpecification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire (Metric) Standard TestMethod for Flash and Fire Points by Cleveland Open Cup IP Designation: 36/84(89); AASHTO No.: T48; DIN 51 376 StandardSpecification for High-Strength Low-Alloy Structural Steel AASHTO No.: M 161 StandardSpecification for Diesel Fuel Oils StandardPictorial Surface Preparation Standards for Painting Steel Surfaces SSPC-Vis3; E1-2001 R(2001) StandardSpecification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and ShapesSupersedes ASTM B453M-1996 Standard TestMethods for Aniline Point and Mixed Aniline Point of Petroleum Products andHydrocarbon Solvents IP Designation: 2/98 ProvisionalStandard Specification for Fabricated Shapes and Finished Parts Fabricatedfrom Polyimide Resins Should Be Used Instead of MIL-R-46198, Which WasCancelle Standard TestMethod for Motor Octane Number of Spark- Ignition Engine Fuel IP Designation:236/87 Standard TestMethod for Hydrazine in Water Standard TestMethod for Oxidation Stability of Gasoline (Induction Period Method) IPDesignation: 40/97; British Standard 4347 StandardSpecification for General Requirements for Wrought Copper and Copper-AlloyPlate, Sheet, Strip, and Rolled Bar StandardPractice for Aviation Fuel Sample Containers for Tests Affected by TraceContamination

Standard TestMethod for Research Octane Number of Spark-Ignition Engine Fuel IPDesignation: 237/87 Standard TestMethods for Nondestructive Measurement of Dry Film Thickness of NonmagneticCoatings Applied to a Ferrous Base Standard TestMethod for Oxidation Stability of Distillate Fuel Oil (Accelerated Method) IPDesignation: 388/97 StandardSpecification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (NickelSilver), and CopperNickel Alloy Plate, Sheet, Strip, and Rolled Bar Standard TestMethod for Tensile Properties of Plastics Standard TestMethods for Nonvolatile Content of Varnishes Reinstated Standard TestMethod for Air-Entraining Admixtures for Concrete Standard TestMethod for Distillation of Petroleum Products at Atmospheric Pressure StandardPractice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, andArches for Storm and Sanitary Sewers and Other Buried Applications StandardSpecification for Predecorated Gypsum Board Standard TestMethods for Sampling and Testing Concrete Masonry Units and Related UnitsE1-2001 StandardSpecification for Fine Aggregate for Bituminous Paving Mixtures Standard TestMethod for Environmental Stress-Cracking of Ethylene Plastics Standard TestMethods for Flexible Cellular Materials Made from Olefin Polymers E1-2001 StandardSpecification for Pressure Vessel Plates, Carbon Steel, for Moderate- andLower-Temperature Service Standard Guidefor Computed Tomography (CT) System Selection E1-2001 R(2001) StandardSpecification for Kerosine StandardSpecification for Retroreflective Sheeting for Traffic Control StandardSpecification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar Standard Practice for Sampling Wrought NonferrousMetals and Alloys for Determination of Chemical Composition R(2001) StandardSpecification for Aluminum-Alloy Permanent Mold Castings Standard TestMethod for Melt Flow Rates of Thermoplastics by Extrusion Plastometer StandardSpecification for Phosphor Bronze Rod, Bar, and Shapes Supersedes ASTMB139M-1995 StandardPractice for Sampling Bituminous Materials StandardSpecification for Carbon Structural Steel StandardSpecification for Rubber Examination Gloves E1-2001 Standard TestMethod for Shear Strength of Adhesives Using Pin-and-Collar Specimen R(1990) Standard TestMethod for Rubber Property - Vulcanization Using Oscillating Disk Cure Meter StandardSpecification for Aviation Turbine Fuels StandardSpecification for Agricultural Liming Materials R(2001) Standard TestMethod for Chipping Resistance of Coatings

StandardSpecification for Copper-Beryllium Alloy Rod and Bar StandardSpecification for Rolled Zinc E1-2001 StandardSpecification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.)and Greater E1-2001 R(2001) StandardSpecification for Rubber Surgical Gloves E1- 2001 Standard Classificationfor Temper Designations for Copper and Copper Alloys - Wrought and Cast Standard TestMethod for Tensile Properties of Thin Plastic Sheeting StandardSpecification for High-Strength Low-Alloy Structural Steel with 50 ksi (345MPa) Minimum Yield Point to 4-in. (100-mm) Thick AASHTO No.: M 222 StandardSpecification for General Requirements for Wrought Copper and Copper-AlloyPlate, Sheet, Strip, and Rolled Bar (Metric) Standard TestMethod for Determining Ignition Temperature of Plastics E1-2001 R(2001) StandardSpecification for High-Temperature Bolting Materials, with ExpansionCoefficients Comparable to Austenitic Stainless Steels E1-2001 StandardSpecification for Performance of Engine Oils StandardPractice for Measuring Ultrasonic Velocity in Materials R(2001) StandardSpecification for Doors, Furniture, Marine Standard TestMethod for Rubber Property - Durometer Hardness StandardSpecification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings,and Rolled Ring Forgings (Metric) Standard TestMethod for Critical Radiant Flux of Floor-Covering Systems Using a RadiantHeat Energy Source StandardTerminology Relating to Chain Link Fencing StandardSpecification for Nonrigid Vinyl Chloride Polymer Tubing StandardSpecification for Perlite Thermal Insulation Board E1-2001 StandardConsumer Safety Specification for Grab Bars and Accessories Installed in theBathing Area R(1999) StandardSpecification for Plates, Carbon Steel, for Forging and Similar Applications StandardSpecification for Age-Hardening Low-CarbonNickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates StandardSpecification for Seamless and Welded Unalloyed Titanium and Titanium AlloyWelding Fittings StandardSpecification for Seamless Brass Tube StandardSpecification for General Requirements for Wrought Copper and Copper-AlloyRod, Bar, Shapes and Forgings StandardSpecification for 3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC) PlasticDrain, Waste, and Vent Pipe and Fittings StandardSpecification for Steel Forgings, Carbon and Alloy, for General IndustrialUse AASHTO No.: M 102 R(2001) Standard TestMethod for Determination of Lubricity of Two-Stroke-Cycle Gasoline EngineLubricants Standard TestMethod for Plastic Strain Ratio r for Sheet Metal StandardPractice for Conditioning and Testing Textiles E1-July 2000

StandardPractice for Controlling Quality of Radiological Examination of ElectronicDevices Standard TestMethods for Determination of Amine Acid Acceptance (Alkalinity) ofHalogenated Organic Solvents Standard Specificationfor Stainless Steel Suture Needle Holders - General Workmanship Requirementsand Corresponding Test Methods R(1996) Standard TestMethod for Rubber Deterioration - Crack Growth R(2000) Standard TestMethod for Resistance to Degradation of Large-Size Coarse Aggregate byAbrasion and Impact in the Los Angeles Machine Standard TestMethod for Resistance to Degradation of Small-Size Coarse Aggregate byAbrasion and Impact in the Los Angeles Machine StandardSpecification for Stainless Steel Socket Head Cap Screws (Metric) StandardSpecification for Copper-Silicon Alloy Wire for General Applications StandardSpecification for Fuel Oils Standard TestMethod for Low-Pressure Air Test of Vitrified Clay Pipe Lines StandardSpecification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-RolledE1-2000 Standard TestMethods for Leaks Using the Mass Spectrometer Leak Detector or Residual GasAnalyzer in the Tracer Probe Mode R(2000) StandardSpecification for Electric-Resistance-Welded Carbon Steel andCarbon-Manganese Steel Boiler and Superheater Tubes R(2000) Standard Specificationfor Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled InsideDiameter StandardSpecification for Stainless Steel Metric Bolts, Screws, and Studs Standard TestMethods for Phosphorus in Lubricating Oils and Additives StandardSpecification for Copper Bar, Bus Bar, Rod, and Shapes E1-2001 StandardSpecification for Design, Fabrication, and Installation of Fences Constructedof Wood and Related Materials Standard TestMethod for Stitch Tear Strength, Single Hole StandardSpecification for Stainless Steel Rope Wire R(2000) StandardSpecification for General Requirements for Carbon, Ferritic Alloy, andAustenitic Alloy Steel Tubes R(2001) Standard TestMethod for Water Absorption (Static) of Vegetable Tanned Leather StandardSpecification for Seamless and Electric- Welded Low-Alloy Steel Tubes R(2000) Standard TestMethod for Cracking Resistance of Leather Standard TestMethod for Colorfastness and Transfer of Color in the Washing of Leather StandardSpecification for Gypsum Backing Board, Gypsum Coreboard, and GypsumShaftliner Board StandardSpecification for Alloy Steel Socket Button and Flat Countersunk Head CapScrews (Metric)

StandardSpecification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric) Standard TestMethod for Dynamic Water Resistance of Shoe Upper Leather by the Dow CorningLeather Tester Standard Guidefor Magnetic Particle Examination StandardSpecification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series) StandardSpecification for Contact-Molded Glass-Fiber- Reinforced Thermoset ResinCorrosion-Resistant Tanks Test Methodfor Sonic Shear Stability of Polymer- Containing Oils Standard TestMethod for Bulk Specific Gravity and Density of Non-Absorptive CompactedBituminous Mixtures Standard TestMethods for Sampling and Testing Fly Ash or Natural Pozzolans for Use as aMineral Admixture in Portland-Cement Concrete StandardSpecification for Structural Steel for Ships StandardSpecification for Seamless and Welded Austenitic Stainless Steel Pipes StandardSpecification for Copper and Copper-Alloy Seamless Condenser Tubes andFerrule Stock E1-2000 StandardSpecification for Aluminum and Aluminum-Alloy Seamless Pipe and SeamlessExtruded Tube StandardSpecification for Photoluminescent (Phosphorescent) Safety Markings FSC 9390;Should Be Used Instead of MIL-L-3891B, Which Was Cancelled on October 16,2000 StandardSpecification for Pressure Vessel Plates, Carbon Steel, Low- andIntermediate-Tensile Strength StandardSpecification for Perfluoroalkoxy (PFA)- Fluorocarbon Resin Molding andExtrusion Materials Standard TestMethod for Buckle Tear Strength of Leather StandardSpecification for Rubber Floor Tile Standard Test Methods for Rubber Cements R(2001) Standard Specification for Cast and Wrought GalvanicZinc Anodes Standard TestMethods for Shear Adhesion of Pressure- Sensitive Tapes E1: 2000 Standard TestMethods and Practices for Emulsified Asphalts AASHTO No.: T59 StandardSpecification for High-Strength Carbon- Manganese Steel of Structural Quality StandardSpecification for Anodes, Sacrificial Zinc Alloy R(2001) StandardSpecification for Coal-Tar Pitch Used in Roofing, Dampproofing, andWaterproofing E1-2000 R(2000) StandardSpecification for Joint Compound and Joint Tape for Finishing Gypsum Board StandardPractice for Installing Vitrified Clay Pipe Lines StandardSpecification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form forFoundry and Die Castings E1- 2001 StandardSpecification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings Standard TestMethod for Blocking

StandardSpecification for Reinforced Concrete Elliptical Culvert, Storm Drain, andSewer Pipe (Metric) StandardSpecification for Gray Iron Castings for Pressure-Containing Parts forTemperatures Up to 650 Degrees F (350 Degrees C) StandardSpecification for Aluminum Bronze Sheet, Strip, and Rolled Bar SupersedesASTM B169M-1996 Standard TestMethod for Luminometer Numbers of Aviation Turbine Fuels Standard TestMethods for Acid Number of Naval Stores Products Including Tall Oil and OtherRelated Products StandardSpecification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Useas a Mineral Admixture in Concrete StandardSpecification for Driven Fasteners: Nails, Spikes, and Staples StandardSpecification for High Solids Content, Cold Liquid-Applied ElastomericWaterproofing Membrane for Use with Separate Wearing Course Standard TestMethod for Sound Absorption and Sound Absorption Coefficients by theReverberation Room Method StandardSpecification for Wrought 18 Chromium- 14 Nickel-2.5 Molybdenum StainlessSteel Bar and Wire for Surgical Implants (UNS S31673) StandardSpecification for Copper-Beryllium Alloy Wire Standard TestMethod for Automated Separation and Collection of Particulate and AcidicGaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method) E1-2000R Standard TestMethod for Deflection Temperature of Plastics under Flexural Load in theEdgewise Position Standard TestMethod for Change in Height at Early Ages of Cylindrical Specimens fromCementitious Mixtures StandardSpecification for Pressure Vessel Plates, Carbon Steel, for Intermediate- andHigher-Temperature Service Standard TestMethod for Freezing Point of Aviation Fuels Standard TestMethods for Physical Testing of Quicklime, Hydrated Lime, and Limestone Standard Methods for Mechanical Testing of Welds (Withdrawn) Specification for Qualification of WeldingProcedures and Welders for Piping and Tubing Standard Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

Earned Value Management Systems FOTP-35 Fiber Optic Component Dust (Fine Sand) TestR(1999) Standard Test Method for Cetane Number of Diesel FuelOil IP Designation: 41/99 Handbook and Guide to Supplement J-STD-001 (IncludesJ- STD-001B to C Comparison) With Amendment 1 (Inactive for Design) Quality Systems - Model forQuality Assurance in Production, Installation and Servicing Second Edition;(PNS 1002: 1994) (CAN/CSA- ISO 9002-94)

(Inactive for Design) Quality Systems - Model forQuality Assurance in Final Inspection and Test Second Edition; (CEN EN ISO9003: 1994) (PNS 1003: 1994) (CAN/CSA-ISO Fluorescent Lamps - Instant-Start and Cold-CathodeTypes - Dimensional and Electrical Characteristics Includes SupplementsC78.3a-1995; C78.3d-1998 R(1996) Steel, Barsand Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted,Annealed Heat Treatable to 290 ksi (1999 MPa) Tensile Strength UNS K92580 Steel, Bars,Forgings, and Tubing 1.45Cr (0.98 - 1.10C) (SAE 52100) PremiumAircraft-Quality, Consumable Electrode Vacuum Melted UNS G52986 Steel, Sheet,Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) UNSK33517 Nuts,Self-Locking, Nickel Alloy, UNS N07001 Classification: 180 ksi/1400 Degrees FProcurement Specification FSC 5310 (Noncurrent)Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co -4.0Mo - 2.9Ti 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Pre Stress-RuptureProperties of Castings AluminumAlloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651,7075-T652) Solution Heat Treated, Mechanically Stress Relieved, andPrecipitation He SteelCleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels MagneticParticle Inspection Procedure Steel, Barsand Forgings 3.1Cr - 11.5Ni - 13.5Co - 1.2Mo (0.21 - 0.25C) Vacuum Melted,Annealed Heat Treatable to 280 ksi (1931 MPa) Tensile Strength UNS K92580 (Noncurrent)Forgings, Magnesium Alloy 2.0Th - 0.78Mn (HM21A - T5) Precipitation HeatTreated (R) HoseAssembly, Convoluted Polytetrafluoroethylene, Metallic Reinforced, LowPressure, Up to 400 Degrees F, Aircraft Nickel-IronAlloy, Magnetic, Sheet and Strip 50Ni - 50Fe Annealed, Forming Grade UNSK95000 Steel, Sheet,Strip, and Plate 5.0Cr - 1.3Mo - 0.50V (0.38 - 0.43C) UNS T20811 BerylliumBars, Rods, Tubing, and Shapes 4.25BeO - 94Be High Micro-Yield Strength Steel, Sheet,Strip, and Plate 0.95Cr - 0.20Mo (0.30 - 0.35C) UNS G41300 Standard Specification for Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, NO6693, N06025, and N06045) andNickel-Chromium-Cobalt-Molybdenum Alloy (U Nuts,Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal1200 Degrees F Use, UN Thread Form FSC 5310 (Noncurrent)Steel, Sand, Castings, 0.82Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340)Normalized and Tempered UNS J24060 Elbow, 90Degree, Pipe, Internal and External Thread FSC 4730 DetailedSpecification for Aircraft Pressure Refueling Nozzle SteelCleanliness, Aircraft Quality Magnetic Particle Inspection Procedure

Alloy,Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo -2.5W - 1.0Cb - 0.15N Solution Heat Treated UNS R30155 BerylliumBars, Rods, Tubing, and Shapes Instrument Grade Standard Test Methods for Resistance of AdhesivePreparations in Container to Attack by Bacteria, Yeast, and Fungi Steel,Corrosion and Heat Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti -2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution HeatTreate Steel, Bars,Forgings, and Tubing 0.80Cr (0.90 - 1.03C) for Bearing Applications Steel,Corrosion Resistant, Seamless Tubing 19Cr - 10Ni (SAE 30304) Solution HeatTreated UNS S30400 (Noncurrent)Electroless Nickel Plating Low Phosphorus Standard Specification for Concrete Brick (Noncurrent)Steel Bars, High Expansion 9.5Ni - 5.5Mn (0.55 - 0.65C) Cold Finished UNSK91456 Nickel Alloy,Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co- 3.2Mo - 3.2W 18.5Fe Solution Heat Treated UNS N06333 (Noncurrent)Steel Sheet and Strip, Aluminum Coated Low Carbon Standard Specification for Zinc Coating (Hot-Dip) onIron and Steel Hardware AASHTO No.: M232

Steel, Barsand Forgings, Maraging 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) DoubleVacuum Melted, Solution Heat Treated UNS K91970 (Noncurrent)Steel Castings, Investment 0.80Cr - 1.8Ni - 0.35Mo (0.38 - 0.46C) (SAE 4340Modified) Annealed UNS J24060 (Noncurrent)Bearings, Silver-Clad Steel Strip FSC 3120 Standard Test Method for Determination of the Abilityof Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-CycleGasoline Engines Other Than Outb Standard Specification for Stainless Steel Socket-SetScrews SteelCleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels MagneticParticle Inspection Procedure Metric (SI) Measurement (Noncurrent)Ceramic Moldings and Extrusions Dense, Ultra-High Alumina (99% A1203) (Cancelled)Rings, Sealing, Phosphonitrilic (FX) Fluoroelastomer High-Temperature-FluidResistant 85-95 Standard Specification for Diesel Fuel Oils

Steel, Sheet,Strip, and Plate 0.75Si - 0.62Cr - 0.20Mo - 0.10Zr (0.10 - 0.17C) UNS K11914 BerylliumBars, Rods, Tubing, and Shapes High Ductility Grade Steel Tubing,Seamless 0.22 - 0.28C (SAE 1025) Cold Drawn and Stress Relieved UNS G10250 Steel, Bars,Forgings, and Tubing 0.31 - 0.38C (SAE 1035) UNS G10350 Standard Specification for Asphalt Shingles (OrganicFelt) Surfaced with Mineral Granules Iron-NickelAlloy, Bars, Forgings, and Rings 42Fe - 37.5Ni - 14Co - 4.8Cb - 1.6TiSolution Heat Treated, Precipitation Hardenable Multiple Melted, HighTemperature, L Steel,Corrosion and Heat Resistant, Sheet, Strip, and Plate 15Cr - 25.5Ni - 1.2Mo -2.1Ti - 0.006B - 0.30V 1800 Degrees F (982 Degrees C) Solution Heat TreatedUNS S Steel Tubing,Seamless 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135) Normalized or Stress RelievedUNS G41350 (Noncurrent)Flux, Aluminum Dip Brazing 1090 Degrees F (588 Degrees C) Fusion Point UseAMS 3415 Carburizingand Heat Treatment of Carburizing Grade Steel Parts Carbon Steel,Wire and Springs 0.75 - 0.88C (SAE 1080) Spring Temper, Cold Drawn UNS G10800 Standard Specification for Loadbearing ConcreteMasonry Units Steel,Corrosion Resistant, Bars and Wire 18Cr - 9.0Ni (SAE 30302) Solution HeatTreated and Cold Drawn 125 ksi (862 MPa) Tensile Strength UNS S30200 (R) Fitting,Elbow, 90 Degree, Flared to Pipe FSC 4730 (Noncurrent)Steel Sheet, Strip, and Plate, Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10Al DoubleVacuum Melted, Solution Heat Treated R(1992) (Cancelled)Rings, Sealing, Ethylene Propylene (EPM) Rubber, Phosphate Ester HydraulicFluid Resistant 85 95 Standard Specification Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, NO6693, N06025, and N06045) andNickel-Chromium-Cobalt-Molybdenum Alloy (UNS N Standard Specification for Normalized High-StrengthLow-Alloy Structural Steel Plates Steel Strip0.68 - 0.80C (SAE 1074) UNS G10740 Steel, Sheet,Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) ConsumableElectrode Melted UNS G43400 Bolt, Tee Head- AMS 5708, Chamfered, .1900-32 UNJF-3A BerylliumBars, Rods, Tubing, and Shapes Standard Grade

Steel,Maraging, Bars, Forgings, Tubing, and Rings, Maraging 19Ni - 3.0Mo - 1.4Ti - 0.10AlDouble Vacuum Melted, Annealed Nickel Alloy,Corrosion and Heat Resistant, Welded Tubing 57Ni - 19.5Cr - 13.5Co - 4.2Mo -2.9Ti - 1.4Al 0.006B - 0.08Zr Consumable Electrode or Vacuum Induction Me (Noncurrent)Braid, Flat, Nylon, Electrical Tying Synthetic Rubber Coated Steel, Sheet,Strip, and Plate 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C)Vacuum Consumable Electrode Melted, Annealed UNS K33517 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel IP Designation: 236/87 Standard Specification for Hollow Brick (HollowMasonry Units Made from Clay or Shale) (Noncurrent)Cloth, Glass Style 7781, Chrome-Silane Finish BerylliumBars, Rods, Tubing, and Shapes Optical Grade Nuts,Self-Locking, Steel, Corrosion and Heat Resistant High Strength, All Metal1200 Degrees F Use, UNJ Thread Form FSC 5310 (Noncurrent)Steel Bars, Forgings, and Tubing 0.75Si - 1.0Cr - 0.58Mo (0.80 - 0.90C)Consumable Electrode Vacuum Melted UNS K18597 (Noncurrent)Cloth, Type "E" Glass, "B" Stage Epoxy-Resin-Impregnated, 7781 Style Fabric, Flame Resistant R(1995) Nickel Alloy,Corrosion and Heat Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co- 4.2Mo - 3.0Ti 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum In Standard Specification for Steel, Sheet, Cold-Rolled,Carbon, Structural, High-Strength Low-Alloy and HighStrength Low-Alloy withImproved Formability Supersedes A Standard Test Method for Research Octane Number ofSpark-Ignition Engine Fuel IP Designation: 237/87 Nut,Self-Locking, UNS S66286, 1200 Degrees F, 160 000 psi, UNJ Thread FSC 5310 (R) Nut,Hexagon, Drilled, Boss Connection, Cres - UNS S30400 UNS S30400; FSC 5310 (Noncurrent)Crystallized Glass Ceramic Standard Test Methods for Ability of Adhesive Films toSupport or Resist the Growth of Fungi (Noncurrent)Steel, Maraging, Sheet, Strip, and Plate 18Ni - 7.8Co - 4.9Mo - 0.40Ti -0.10Al Consumable Electrode Melted, Solution Heat Treated UNS K92890 Cobalt Alloy,Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni -14.5W - 0.07La Solution Heat Treated UNS R30188 (Noncurrent)Steel Wire, Corrosion Resistant 11.8Cr - 8.5Ni - 0.30(Cb + Ta) - 1.1Ti -2.0Cu Precipitation Hardenable, Spring Temper UNS S45500 10/19/2001 (16p)

Standard Specification for Polypropylene Injection andExtrusion Materials 09/28/2000 (30p) Standard Test Method for Oxidation Stability ofDistillate Fuel Oil (Accelerated Method) IP Designation: 388/97 Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement AASHTO No.: M 31 Standard Practice for Preparation, Standardization,and Storage of Standard and Reagent Solutions for Chemical Analysis E(2001)R(2001) Standard Test Method for Obtaining Hydrostatic DesignBasis for Thermoplastic Pipe Materials Standard Specification for Style 1 Stainless SteelMetric Nuts Standard Specification for Nonloadbearing ConcreteMasonry Units Standard Specification for Castings, Nickel and NickelAlloy E(2001)

Standard Classification System for Nylon Injection andExtrusion Materials (PA) Standard Test Method for Shear Modulus at RoomTemperature Standard Specification for Nonferrous Nuts for GeneralUse Standard Test Method for Sulfur in Petroleum Products(High-Temperature Method) Standard Specification for Cold-Formed Welded andSeamless Carbon Steel Structural Tubing in Rounds and Shapes Standard Test Method for Acid and Base Number byColor- Indicator Titration IP Designation: 139/98; British Standard 2634 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

Standard Specification for Automotive Spark-IgnitionEngine Fuel Standard Test Method for Tensile Properties ofAdhesive Bonds Standard Test Method for Low-Temperature Viscosity ofLubricants Measured by Brookfield Viscometer R(1993) Standard Specification for Nonferrous Bolts, Hex CapScrews, and Studs for General Use (Metric) Standard Specification for Rope-Lay-Stranded CopperConductors Having Concentric-Stranded Members, for Electrical Conductors Standard Specification for Corrugated Steel Pipe,Metallic-Coated for Sewers and Drains AASHTO No.: M 36/M 36M

Standard Test Method for Oxidation Stability ofInhibited Mineral Insulating Oil by Pressure Vessel Standard Practice for Verification and Classificationof Extensometers System E(2001) Standard Specification for Prefabricated MasonryPanels Standard Specification for Nonferrous Nuts for GeneralUse (Metric) Standard Specification for Rolled Zinc Standard Terminology for Composite Materials Standard Specification for Gray Iron Castings ReplacesASTM A 48M-94 Standard Specification for Stainless Steel Socket SetScrews (Metric) Standard Test Method for Density, Relative Density(Specific Gravity), and Absorption of Coarse Aggregate Standard Specification for Copper-Nickel-Silicon AlloyRod and Bar Standard Test Method for Bromine Numbers of PetroleumDistillates and Commercial Aliphatic Olefins by Electrometric Titration IPDesignation: 130/98 Standard Specification for Zinc (Hot-Dip Galvanized)Coatings on Iron and Steel Products

Standard Specification for Rubber Seals ContactingLiquids in Solar Energy Systems R(2001) Standard Test Method for Volatile Matter (Moisture) ofLeather by Oven Drying R(2001) Standard Specification for Nickel-Chromium-Iron Alloys(UNS N06600, N06601, N06603, N06690, NO6693, N06025, and N06045) andNickel-Chromium-Cobalt-Molybdenum Alloy (U Standard Specification for Piping Fittings of WroughtCarbon Steel and Alloy Steel for Moderate and High Temperature Service Standard Specification for Stainless Steel Socket HeadCap Screws Standard Practice of Calibration of Force-MeasuringInstruments for Verifying the Force Indication of Testing Machines Standard Specification for Ultra-High-Molecular-WeightPolyethylene Molding and Extrusion Materials Standard Test Method for Thermal Endurance of FlexibleElectrical Insulating Varnishes Standard Practice for Rubber - Materials, Equipment,and Procedures for Mixing Standard Compounds and Preparing StandardVulcanized Sheets R(1994) Standard Specification for Poly(Vinyl Chloride)(PVC)Corrugated Sewer Pipe with a Smooth Interior and Fittings Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping Standard Specification for Flexible Cellular Materials- Urethane for Furniture and Automotive Cushioning, Bedding, and SimilarApplications Standard Specification for Superstrength Alloy SteelForgings Standard Test Method for Thermal Oxidation Stabilityof Aviation Turbine Fuels (JFTOT Procedure) IP Designation: 323/99 E(2001) Standard Test Method for Roll Stability of LubricatingGrease E(2001)

Standard Specification for Nonrigid Vinyl ChloridePolymer and Copolymer Molding and Extrusion Compounds R(2001) Standard Test Method for Water Content of Soil andRock in Place by Nuclear Methods (Shallow Depth) Standard Specification for Concrete Made by VolumetricBatching and Continuous Mixing Standard Terminology Relating to Resilient FloorCoverings Standard Specification for Concrete Masonry Units forConstruction of Catch Basins and Manholes Standard Specification for Sampling Procedure forImpact Testing of Structural Steel AASHTO No.: T 243 Standard Specification for Weldless Chain Standard Test Method for Water Absorption of CoreMaterials for Structural Sandwich Constructions Standard Test Method for Determining the Presence ofLead Salts in Leather R(2001) Standard Specification for Polyethylene (PE) PlasticPipe (DR-PR) Based on Controlled Outside Diameter Standard Specification for Thermoplastic Gas PressurePipe, Tubing, and Fittings Standard Specification for Steel Sheet, MetallicCoated by the Hot-Dip Process and Prepainted by the CoilCoating Process forExterior Exposed Building Products Standard Test Method for Density, Relative Density(Specific Gravity), and Absorption of Fine Aggregate Structural Welding Code - Steel TP-10A Fluid Immersion Test Procedure for ElectricalConnectors and Sockets TP-42B Impact Test Procedure for Electrical Connectors TP-53B Nitric Acid Vapor Test, Gold Finish TestProcedure for Electrical Connectors and Sockets TP-83 Shell-to-Shell and Shell-to-Bulkhead ResistanceTest Procedure for Electrical Connectors TP-22B Simulated Life Test Procedure for ElectricalConnectors TP-23B Low Level Contact Resistance Test Procedure forElectrical Connectors and Sockets Electrical Performance Standards for High ResolutionMonochrome Closed Circuit Television Camera TP-45A Firewall Flame Test Procedure for ElectricalConnectors Requirements for Soldered Electrical and ElectronicAssemblies Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 8Ni(SAE 30301) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength UNSS30100 Installation Procedures and Torques for FluidConnections

Steel, Corrosion and Heat Resistant, Bars, Wire, andForgings 12.5Cr - 0.75Ni - 1.0Mo - 1.0W - 0.24V (0.200.25C) Hardened andTempered UNS S42200 Steel, Corrosion and Heat Resistant, Wire 18Cr -10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated UNS S32100 Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.38- 0.43C) (SAE 4140) Annealed UNS G41400 Steel, Corrosion and Heat-Resistant, Bars, Wire,Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B 0.30VConsumable Electrode Melted 1650 Degrees F (899 D Steel, Corrosion Resistant, Sheet, Strip, and Plate16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation HardenableUNS S17400 Method-Pressure Drop Tests for Fuel System Components Steel, Corrosion and Heat Resistant, Bars, Wire,Forgings, Tubing, and Rings 12.5Cr (SAE 51410) Annealed UNS S41000 (R) Nut, Plain, Hexagon - Drilled, Silver Plated - UNSS66286, 130 ksi min FSC 5310; UNS S66286 Manufacturing and Inspection Standards for PreformedPackings (O-Rings) Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30ZnHalf Hard (H02) UNS C26000 Steel, Corrosion and Heat Resistant, Sheet, Strip, andPlate, 12.5Cr (SAE 51410) Annealed UNS S41000 Steel, Maraging, Investment Castings 17Ni - 10Co -4.6Mo - 0.30Ti - 0.06Al Vacuum Melted, Homogenized, Overaged, and SolutionHeat Treated UNS J93010 Plating, Cadmium Low Hydrogen Content Deposit Steel, Corrosion and Heat-Resistant, Bars, Wire, andForgings 18Cr - 13Ni - 2.1Mo Free Machining Solution Heat Treated UNS J92200 (Noncurrent) Nut, Plain Hex - UNS G87400, CadmiumPlate, MJ Thread, Metric Reaffirmed Noncurrent November 2001; UNS G87400; FSC5310 Steel, Corrosion and Heat-Resistant, Welding Wire 27Cr- 21.5Ni UNS S31080 Steel, Corrosion and Heat Resistant, Welding Wire 15Cr- 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted,Environment Controlled Packaging UNS S66286 Steel, Corrosion and Heat Resistant, Sheet, Strip, andPlate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed UNS S42000 Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe UNS N06002 Steel, Corrosion Resistant, Wire 19Cr - 9.5Ni (SAE30304) Solution Heat Treated UNS S30400 Steel, Corrosion Resistant, Seamless Tubing 19Cr -10Ni (SAE 30304) Solution Heat Treated UNS S30400 Steel, Welded Tubing 0.95Cr - 0.20Mo (0.28 - 0.33C)(SAE 4130) UNS G41300

Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5SnAnnealed, 110 ksi (758 MPa) Yield Strength UNS R54520 Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr(7049-T73) Solution and Precipitation Heat Treated UNS A97049 Steel, Corrosion and Heat-Resistant, Bars, Wire,Forgings, Tubing, and Rings 15Cr - 25.5Ni - 1.2Mo - 2.1Ti 0.006B - 0.30VConsumable Electrode Melted, 1800 Degrees Steel, Corrosion and Heat Resistant, Sheet, Strip, andPlate 12Cr (SAE 51410 Modified) Ferrite Controlled, Annealed UNS S41000 Nickel Alloy, Corrosion and Heat-Resistant, WeldingWire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al UNS N06231 Nickel, Sheet and Strip Low (0.02 Max) Carbon AnnealedUNS N02201 (Noncurrent) Nut, Plain Hex - Thin, UNS G87400,Cadmium Plate, MJ Thread, Metric FSC 5310; UNS G87400 Steel, Corrosion and Heat Resistant, Bars, Wire, andForgings 12Cr - 0.50Mo Annealed UNS S41025 (Noncurrent) Bolt-Machine, Hex Head, Drilled, PDShank, MJ Thread, AMS 6322, Cadmium Plate, Metric Reaffirmed NoncurrentNovember 2001; FSC 5306 Nickel Alloy, Corrosion and Heat-Resistant, WeldingWire 72Ni - 3.0Mn - 20Cr - 2.5Cb UNS N06082 Aluminum Alloy Forgings and Rolled or Forged Rings6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T6) Solution and PrecipitationHeat Treated UNS A92219 Steel, Corrosion and Heat Resistant, Wire 18Cr -11.5Ni - 0.70Cb (SAE 30347) Solution Heat Treated UNS S34700 Steel Bars, Forgings, and Tubing 1.6Si - 0.82Cr -1.8Ni - 0.40Mo - 0.08V (0.40 - 0.44C) Consumable Electrode Vacuum RemeltedNormalized and Tempered Steel, Corrosion and Heat-Resistant, Bars, Wire,Forgings, and Tubing 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B 0.30VConsumable Electrode Melted, 1650 Degrees F (899 Nickel-Iron Alloy, Corrosion and Heat Resistant,Welding Wire 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 35Fe Steel, Sheet, Strip, and Plate 1.05Cr - 0.55Ni - 1.0Mo- 0.12V (0.45 - 0.50C) Consumable Electrode Vacuum Melted UNS K24728 Steel Tubing, Welded (0.22 - 0.28C) (SAE 1025)Normalized or Stress Relieved UNS G10250 Nut, Self Locking - Spline Drive, Extended Washer, UNSG87400, Cadmium Plate, MJ Thread, Metric FSC 5310; UNS G87400 R(2001) Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 72Ni - 15.5Cr - 1.0Cb - 2.4Ti - 0.70Al - 7.0Fe UNS N07069 Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe- 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05Zr - 0.05La -0.20N UNS R30556 Cobalt Alloy, Corrosion and Heat Resistant, HardfacingRod and Wire 62Co - 27Cr - 2.9Ni - 5.5Mo UNS R30021 (R) Fitting, Tee, Standard and Reducer, Bulkhead onRun, Internal Port on Side, Flareless FSC 4730

Coatings, Polyurethane, Rain Erosion Resistant forExterior Aircraft and Missile Plastic Parts FSC 8010 (R) Conversion Coating of Titanium Alloys Fluoride-Phosphate Type Bolt, Tee Head, Interface Surface, Dimensions for Nickel Alloy, Corrosion and Heat-Resistant, Bars,Wire, Forgings, and Rings 61Ni - 20.5Cr - 8.5Mo - 3.4Cb 1.3Ti - 5.0FeConsumable Electrode or Vacuum Induction Mel Hole Sizes, Recommended for Metric Fasteners onPropulsion Equipment Steel Bars 1.0Cr - 0.20Mo - 0.045Se (0.39 - 0.48C)(4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free MachiningUNS K11542 Steel, Bars, Forgings, and Rings 0.95Cr - 0.20Mo (0.28- 0.33C) (SAE 4130) UNS G41300 Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al 0.006B Vacuum InductionMelted, Solution Heat Treated Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 70Ni - 2.4Mn - 15.5Cr - 3.0Ti - 7.0Fe UNS N07092 Titanium Alloy Forgings 10V - 2Fe - 3Al ConsumableElectrode Melted, Solution Heat Treated and Aged 173 ksi (1193 MPa) TensileStrength Steel, Corrosion and Heat Resistant, Welding Wire11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V UNS S41780 Nickel Alloy, Corrosion and Heat Resistant, Sheet,Strip, and Foil 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti 0.50Al - 18FeConsumable Electrode or Vacuum Induction Mel Plating, Chromium Hard Deposit Steel, Bars, Forgings, and Tubing 0.80Cr - 0.85Ni -0.20Mo - 0.003B - 0.04V (0.38 - 0.43C) (Modified 98BV40) UNS K11940 (R) Nut, Plain, Castellated, Hexagon - UNS S66286, 130ksi min FSC 5310; UNS S66286 (R) Gasket - Metal O-Ring, .094 Tube X .006 Wall,Silver Plated, Cres - UNS S32100 FSC 5330 (Noncurrent) Bolt, Machine-Spline Extended Washer, PDShank, Long Thread, AMS6322, Cadmium Plated, Metric Reaffirmed NoncurrentNovember 2001; FSC 5306 Nickel Alloy, Corrosion and Heat Resistant, WeldingWire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb - 0.90Ti - 0.50Al 18Fe ConsumableElectrode or Vacuum Induction Melted UNS N0 Nickel-Iron Alloy, Magnetic, Bars, Rods, Tubing, andForgings 50Ni - 50Fe UNS K95000 Balls, Steel, Corrosion-Resistant 17Cr Annealed UNSS44002, S44003, S44004 Steel, Corrosion-Resistant, Bars, Wire, and Forgings18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated UNS S30360 Steel, Bars, Forgings, and Tubing 4.1Cr - 3.4Ni -4.2Mo - 1.2V (0.11 - 0.15C) Premium Aircraft-Quality for Bearing ApplicationsDouble Vacuum Melted UNS K91231

Steel, Maraging, Investment Castings 18.5Ni - 9.0Co -5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and SolutionHeat Treated UNS J93150 Piloted Ring Seal Tube Swivel Connection Assembly (R) Nut, Hexagon, Drilled, Boss Connection, Aluminum -UNS A92014 FSC 5310; UNS A92014 12/7/2001 (16p) Guide to Formwork for Concrete Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride)(PVC) Plastic Drain, Waste, and Vent Pipe and Fittings Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing Standard Specification for Rubber Surgical Gloves Standard Specification for Rubber Examination Gloves Standard Test Method for Thickness of Pressure- Sensitive Tapes

View more...

Comments

Copyright ©2017 KUPDF Inc.
SUPPORT KUPDF