Download ASME B 36.10 M Pipe standred.pdf...
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
The American Society of Mechanical Enlineen
A N A M E R I C A N N A T I O N A L S T A N D A R D
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.1OM-2000 COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
Date of Issuance: March 15, 2001
This Standard will be revised when the Society approves the issuance of a new edition. There will be no addenda or written interpretations of the requirements of this Standard issued to this edition.
ASME is the registered trademark of the American Society of Mechanical Engineers.
This code or standard was developed under procedures accredited as meeting thecriteria for American National Standards. The Consensus Committee that approved the code or standard was balanced to assure that individuals from competent andconcerned interests have had an opportunity toparticipate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not "approve," "rate," or "endorse" any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard againstliability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that the determination of the validity of any such patent rights, andthe risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals.
No part of this document may bereproduced in any form, in an electronic retrieval system or otherwise, without the prior written permissionof the publisher.
The Am.erican Society of Mechanical Engineers Three Park Avenue, New York, NY 10016-5990
Copyright O 2001 by THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS All Rights Reserved Printed in U.S.A.
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
S T D - A S M E B 3 b - L O M - E N G L 2000 m 0757b70 Ob21734 785 M
In March 1927, theAmerican Standards Association authorized the organization of a Sectional Committee on Standardization of Dimensions and Material of Wrought Steel and Wrought Iron Pipe and Tubing for the purpose of unifying the standards of these commodities in force in this country. The American Society for Testing and Materials and The American Society of Mechanical Engineers were designated as sponsors, and the first meeting of the Sectional Committee washeld in Pittsburgh, Pennsylvania, onMay 18, 1928. The dimensions of commercialpipe in generaluse in theUnited States at thetime conformed rather generallytothoserecommended by the ASME Committee onStandard PipeandPipe Threads published in 1886 (ASME Transactions, Vol.VIII,p. 29). On these standards an enormous industryhas beenbuiltandthe satisfactory useof thisproduct provesthe soundness ofthe original designand specification. Increasingly severe service demands at thetimeofthe Committee’s organization had beenmetby using the nearest available pipe or tubing for heavier sections such as casing, mechanicaltubing, etc., with resultinguneconomicalmultiplicity ofwallthicknesses. Subsequently, the Committee, withthecooperation of the industry, made a survey of existing practice as the logical starting point for the development of an American Standard. Fromthis survey, a table was designed to provide a selectionofwall thicknesses ofpipe to cover the power piping requirements of industry where strength to resist internal pressure governsselection andwas later expandedtoincludepipe diameters and thicknesses used in other industries. The original intent of the Committee was to establish a system of Schedule Numbers forpipesize/wallthicknesscombinationswhichwouldhaveanapproximatelyuniform loo0 timesthe P/S expression contained in themodifiedBarlow relationship equalto formula for pipewallthickness as defined in theAppendixtothis standard. The resulting Numbersdeparted so far from existing wall thicknesses in commonusethattheoriginal intent could not beaccomplished. The Schedule Numberswerethen adopted strictly as a convenient designationsystemfor use in ordering. Inall cases, the designer mustbasehisselection on the rules and allowable stresses set by the code which governs his particular construction. The table is dimensionally complete for all sizes andwallthicknesseswithinits scope, but some ofthe larger, heavier wall sections arebeyond the capability of seamlessmillproductionandmustbeobtainedfrom or othersources. forged andboredbillets The firstissueofthis standard was givenwiththe designation AmericanStandard “tentative” by theAmerican Standards Association in November 1935. Subsequent slight the revisionsto Table 1 andthe footnotes of thedimensional tables wereapprovedand ASA changedthedesignation toAmerican Standard; the date ofASA approval wasApril 28, 1939. Further revisions weremade by theSectional Committee. The list of specifications in Table 1 was revisedwherenecessary and slightrevisions in wall thicknesses of some of P/S valueswereout of line. thelarge sizes of theheavyschedulesweremadewhere It wasthehope in 1939 thatthedesignation of pipeused commercially by all industry as Standard weight, Extra-Strong, and Double Extra-Strong would gradually be replaced by Schedule Numberdesignation.However,owingto customs of over 50 years’ standing,
...
111
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
demand and production of pipe to these traditional dimensionsis undiminished. Consequently, in responseto a demandfromusers,acceptedpractice for dimensionsandweightsof commercialwroughtsteelandweldedwroughtironpipewereadded.Thesechangeswere designated an AmericanStandardonFebruary23,1950. SubcommitteeNo. 1 was reorganized in 1957. In additiontonecessaryeditorialchanges, a simplifiedformat was selected for thetables of weightsand dimensions so astoinclude andidentifythe sizes andweights ofAPI Standards 5L and 5LX. These changestothe standard were approved and it was designated an American Standard on December 21, 1959. The standardwasrevised in 1969. A uniformmethodto calculate theplainendweight in the tabulatedweights of ofsteel pipe wasincluded,andminoradjustmentsweremade steelpipeinTable 2 toconformtothis newmethod.Additional sizes andthicknesses of use were also addedto Table 2. InasmuchasAPI steelpipethathadcomeintocommon Standard 5L nolongerincludedwroughtironpipe,referencetothisAPIStandardwas deletedfrom Table 3. These changesto the standardwereapprovedanditwasdesignated 3, 1970. an AmericanNationalStandardonFebruary Furtherrevisionsweremadetothestandard in 1975.Additional sizes andthicknesses ofsteelpipethathadbeenaddedtoAPIspecificationswereaddedto Table 2. Table3, DimensionsandWeightsofWeldedWroughtIronPipe, was deleted in its entirety, since wroughtironpipeisnolongerproduced.Thesechanges in thestandardwereapproved 5 , 1975. anditwasdesignated an AmericanNationalStandardonJune The standardwasrevised in 1978toinclude SI metric dimensions. The outside diameter by andwallthicknesseswereconvertedtomillimeters by multiplyingtheinchdimensions 25.4.Outsidediameterslargerthan 16 in. wereroundedtothenearestmillimeter,and 0.1 mm.Wallthicknesses outside diameters 16 in. andsmallerwereroundedtothenearest wereroundedtothenearest0.01mm.Theseconvertedandrounded SI metricdimensions wereaddedtoTable2. A formulatocalculatethe SI metricplainendmass, in kilograms per meter, using SI metric diameters and thicknesses was added to section 5. The SI metric plain end masswascalculatedand wasaddedto Table 2. These changes in thestandard wereapprovedanditwasdesignatedanAmericanNationalStandardonJuly18,1979. in 1984. The ANSIdesignations,whicharenolonger in Furtherrevisionsweremade use,weredeletedfrom Table 1, andthelist of specificationswasrevisedto agree with currentASTMandAPIspecifications.Additionalsizesandthicknesseswhichhadbeen addedtoAPIspecificationswereaddedto Table 2. Thateditionwasapproved as an AmericanNationalStandardonAugust19,1985. The next edition included additional wall thicknesses and was approved by the American NationalStandardsInstitute onAugust24,1995. The 1996 edition contained revisions to Table 2, adding pipe sizes, changing some plain endweightsandmasses,identifyingmetricpipe by the dimensionless designator DN,and eliminatingtheAPISpecificationcolumn.The 1996 editionwasapprovedas an American 23, 1996. NationalStandardonSeptember The current edition contains revisions to Table 2 toincludethereviseddensityforsteel incorporatedintoSection 5 previously. Table 1 was deleted and other editorial changesto Sections 1, 2, 3, 5, 8, and 9 were made. This edition was approved as an American National I, 2000. StandardonDecember
iv
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
ASME STANDARDS COMMITTEE B32 Metal and Metal Alloy Wrought Mill Product Nominal Sizes (The following is the roster of the Committea at the time of approval of this Standard.)
OFFICERS J. A. Gruber, Ph.D., Chair S. D. Weinman, Secretary
COMMITTEE PERSONNEL F. M. Christensen, F. M. Christensen Metallurgical Consultant, Inc. A. Cohen, Arthur Cohen & Associates J. A. Gruber, Ph.D., Wheatland Tube Co.
W.N. Hotliday, L W Steel Co. L. T. Ingels, American Gas Association, Inc. K. O. Kverneland, Kok Metric Co. A. R. Machell, Jr. P. Pollak, Aluminum Association, Inc. S. D. Weinman, The American Society of Mechanical Engineers
V
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
CONTENTS
Foreword ................................................................................. Standards Committee Roster ................................................................
iii v
scope ................................................................................ Size ..................................................................................
1
Materials ............................................................................. Wall Thickness ....................................................................... Weights .............................................................................. Permissible Variations ................................................................. Pipe Threads .......................................................................... Wall Thickness Designations ........................................................... Wall Thickness Selection ..............................................................
1 1 1 1 1 1 2 2
Table
1
Dimensions and Weights of Welded and Seamless Wrought Steel Pipe
vii
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
...................
3
WELDED AND SEAMLESS WROUGHT STEEL PIPE
in poundsper foot, Thenominalplainendweight, is calculated usingthefollowingformula:
1 SCOPE
ThisStandardcoversthe standardization of dimensions ofweldedandseamlesswroughtsteelpipe for high or lowtemperaturesand pressures. Theword pipe isused as distinguished from rube toapplyto tubular products of dimensions commonly used for pipeline andpiping systems. PipeNPS12 (DN 300) andsmallerhave outside diametersnumerically larger than their corresponding sizes. In contrast, the outside diameters of tubes are numerically identical tothe size number for all sizes.
W $ = 10.69(0- t)t
where = nominalplainendweightroundedtothe nearest 0.01 lb/ft D = outside diameter to the nearest 0.001 in. (the for ODonly in symbol D is to beused mathematicalequations or formulas) t = specified wall thickness rounded to thenearest 0.001 in. The nominal plain end mass, in kilograms per meter, is calculated using the following formula: Wpe
2 SIZE
The size ofallpipeisidentifiedbythenominal pipe size. The manufacture of pipe NPS (DN 6) to NPS 12 (DN 300) inclusive is basedon a standardized outside diameter (OD). This OD was originally selected so thatpipewith a standardODandhaving a wall thicknessthatwastypicalof the periodwouldhave an insidediameter (ID) approximatelyequal to the nominal size. Although there is no such relation between the existing standard thickness - ODandnominal size - these nominal sizes and standard ODs continue in use as "standard." 350) and Themanufacture ofpipeNPS14(DN largerproceedsonthebasis ofanODcorresponding tothenominal size.
Wpr = 0.0246615(0 - t ) t
where Wpe = nominalplainendweightroundedto the nearest 0.01 kg/ m D = outside diametertothe nearest 0.1mm for outside diameters that are 16 in. (406.4 mm) andsmallerand to the nearest 1.0 mm for outside diameters larger than16 in. (406.4 mm) (the symbol D istobeused for OD only in mathematical equations or formulas) t = specified wall thickness roundedtothenearest 0.01 mm 6 PERMISSIBLE VARIATIONS
3 MATERIALS
in dimensions differ depending upon the methodofmanufactureemployed in making the pipe to the various specifications available. Permissible variations for dimensions are indicated in each specification.
The dimensional standards for pipe described here Variations are for productscovered in ASTM specifications. 4 WALLTHICKNESS
Thenominalwall
7 PIPE T I - " X
thicknesses are given in Table1.
Unlessotherwise specified, thethreadsofthreaded pipe shall conform to ANSI/ASME B 1.20.1, Pipe Threads,GeneralPurpose (Inch). permit Schedules 5 and 10 wall thicknesses do not threading in accordance with ANSVASME B1.20.1.
5 WEIGHTS
The nominal weights of steel pipe values and are tabulated in Table 1.
are calculated
1
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
S T D - A S M E B3b.LO"ENGL
2000
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.1OM-2000
8 WALLTHICKNESSDESIGNATIONS
The wall thickness designations Standard, ExtraStrong, andDoubleExtra-Stronghavebeencommercially used designations for many years. As explained in the Foreword, the Schedule Numbers were subsequently added as a convenient designation for useinordering pipe. Standard and Schedule 40 are identical for upto NPS 10 (DN 250) inclusive. All larger sizes of Standard in. (9.53 mm) wall thicknesses. Extra-Strong have 8 (DN andSchedule 80 are identical for uptoNPS 200) inclusive. All larger sizes of Extra-Stronghave '/2 in. (12.70 mm)wall thicknesses. Pipe of sizes andwall thicknesses other thanthose of Standard, Extra-Strong, andDouble Extra-Strong, and Schedule Number were adopted from API Specifi-
2
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
0757b70 Ob21737 2b7 W
cation 5L. It wasnotconsideredpractical to establish ScheduleNumbers or new designations for them. 9 WALLTHICKNESSSELECTION
When the selection of wall thickness depends primarily upon capacity to resist internal pressure under given
conditions, thedesignershallcomputethe exact value ofwall thickness suitable for conditions for which the pipeis required, asprescribed in detail in the ASME BoilerandPressureVesselCode, ASME B31 Code for Pressure Piping, or other similar codes, whichever governs the construction. A thickness shallbe selected fromTable 1 to suit the valuecomputed to fulfill the conditions for which the pipe is desired.
WELDED AND WROUGHT SEAMLESS
PIPE
STEEL
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE Customary Units Extra-Strong End Plain Wall Outside NPS Diameter, Thickness,Weight, in. lblft [Note (I)]in.
Identification [Standard ISTD), [XS), or Double Extra Strong (XXS)]
... ...
0.405 0.405 0.405 0.405
0.049 0.057 0.068 0.095
0.1 9 0.21 0.24 0.31
0.540 0.540 0.540 0.540
0.065 0.073 0.088 0.1 19
0.33 0.36 0.43 0.54
0.675 0.675 0.675 0.675
0.065 0.073 0.091 0.1 26
0.42 0.47 0.57 0.74
0.840 0.840 0.840 0.840
0.065 0.083 0.095 0.109
0.54 0.67 0.76 0.85
0.840 0.840 0.840
0.147 0.1 88 0.294
1 .o9 1.31 1.72
1.O50 1.O50 1.O50 1.O50
0.065 0.083 0.095 0.1 13
0.69 0.86 0.97 1.13
1.O50 1.O50 1.O50
0.1 54 0.219 0.308
1.48 1.95 2.44
1.315 1.315 1.31 5 1.315
0.065 0.109 0.114 0.133
0.87 1.41 1.46 1.68
STD
1.315 1.31 5 1.31 5
0.179 0.250 0.358
2.17 2.85 3.66
1.660 1.660 1.660 1.660
0.065 0.109 0.117 0.140
1.11 1.81 1.93 2.27
1.660 1.660 1.660
0.191 0.250 0.382
3.00 3.77 5.22
10 30 40 80
STD
xs
... ...
10 30 40 80
STD
xs
... ...
... ...
... ...
... ...
...
...
Mass, kglm
10.3 10.3 10.3 10.3
1.24 1.45 1.73 2.41
0.28 0.32 0.37 0.47
13.7 13.7 13.7 13.7
1.65 1.85 2.24 3.02
0.49 0.54 0.63 0.80
10 30 40 80
10 10 10 10
17.1 17.1 17.1 17.1
1.65 1.85 2.31 3.20
0.63 0.70 0.84 1.10
5 10 30 40
15 15 15 15
21.3 21.3 21.3 21.3
1.65 2.1 1 2.41 2.77
0.80 1.o0 1.12 1.27
80 160
...
15 15 15
21.3 21.3 21.3
3.73 4.78 7.47
1.62 1.95 2.55
5 10 30 40
20 20 20 20
26.7 26.7 26.7 26.7
1.65 2.1 1 2.41 2.87
1.O3 1.28 1.44 1.69
80 160
...
20 20 20
26.7 26.7 26.7
3.91 5.56 7.82
2.20 2.90 3.64
5 10 30 40
25 25 25 25
33.4 33.4 33.4 33.4
1.65 2.77 2.90 3.38
1.29 2.09 2.18 2.50
xs ... xxs
80 160
...
25 25 25
33.4 33.4 33.4
4.55 6.35 9.09
3.24 4.24 5.45
...
5 10 30 40
32 32 32 32
42.2 42.2 42.2 42.2
1.65 2.77 2.97 3.56
1.65 2.69 2.87 3.39
80 160
32 32 32
42.2 42.2 42.2
4.85 6.35 9.70
4.47 5.61 7.77
STD
xs
... ...
*.. STD
xs
...
xxs
... ... ... STD
xs ...
xxs ... ... ...
... ...
STD
xs
...
xxs
...
3
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
SI Units End Plain WallOutside Schedule DN Diameter, Thickness, mm mm No. [Note (211
WELDED B36.10M-2000 ASME
AND WROUGHT SEAMLESS
PIPE
STEEL
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT’D) Identification [Standard (STD), (XS),
Customary Units Extra-Strong End Plain WallOutside Diameter, NPS Thickness, Double Weight, Schedule Extra or In. in. [Note 1111 1.goo
lbit
Strona 1XXS)I
...
1 .goo 1.900 1 .goo
0.065 0.109 0.125 0.145
1.28 2.09 2.37 2.72
1.goo 1 .goo 1 .goo
0.200 0.281 0.400
3.63 4.86 6.41
2.375 2.375 2.375 2.375
0.065 0.083 0.109 0.1 25
1.61 2.03 2.64 3.01
2.375 2.375 2.375 2.375
0.141 0.1 54 0.172 0.188
3.37 3.66 4.05 4.40
2.375 2.375 2.375 2.375 2.375
0.218 0.250 0.281 0.344 0.436
5.03 5.68 6.29 7.47 9.04
2.875 2.875 2.875 2.875
0.083 0.109 0.120 O. 125
2.48 3.22 3.53 3.67
2.875 2.875 2.875 2.875
O. 141 0.156 0.172 0.188
4.1 2 4.53 4.97 5.40
2.875 2.875 2.875 2.875
0.203 0.216 0.250 0.276
5.80 6.14 7.02 7.67
STD
2.875 2.875
0.375 0.552
10.02 13.71
... xxs
3.500 3.500 3.500 3.500
0.083 0.1 o9 0.1 20 0.1 25
3.03 3.95 4.34 4.51
3.500 3.500 3.500 3.500 3.500
0.141 0.1 56 0.172 0.1 88 0.216
5.06 5.58 6.1 2 6.66 7.58
...
...
STD
xs
...
End Plain WallOutside DN Diameter, Thickness, Mass, No. [Note kglm (2)lmm mm
5 10 30 40
40 40 40 40
48.3 48.3 48.3 48.3
1.65 2.77 3.18 3.68
1.90 3.1 1 3.53 4.05
80 160
40 40 40
48.3 48.3
48.3
5.08 7.14 10.15
5.41 7.25 9.55
50 50 50 50
60.3 60.3 60.3 60.3
1.65 2.1 1 2.77 3.18
2.39 3.03 3.93 4.48
50 50 50 50
60.3 60.3 60.3 60.3
3.58 3.91 4.37 4.78
5.01 5.44 6.03 6.54
50 50 50 50 50
60.3 60.3 60.3 60.3 60.3
5.54 6.35 7.14 8.74 11.O7
7.48 8.45 9.36 11.1 1 13.44
65 65 65 65
73.0 73.0 73.0 73.0
2.1 1 2.77 3.05 3.18
3.69 4.80 5.26 5.48
65 65 65 65
73.0 73.0 73.0 73.0
3.58 3.96 4.37 4.78
6.1 3 6.74 7.40 8.04
65 65 65 65
73.0 73.0 73.0 73.0
5.16 5.49 6.35 7.01
8.63 9.14 10.44 11.41
160
65 65
73.0 73.0
9.53 14.02
14.92 20.39
5
80 80 80
88.9 88.9 88.9 88.9
2.11 2.77 3.05 3.18
4.52 5.88 6.46 6.72
88.9 88.9 88.9 88.9 88.9
3.58 3.96 4.37 4.78 5.49
7.53 8.30 9.1 1 9.92 11.29
...
xxs
... ...
...
...
10 30
5
...
...
...
STD
40
...
...
...
...
xs
80
...
...
...
160
...
...
xxs
...
...
5
... ... ... ...
...
...
...
... 10
...
...
...
...
30 40
...
...
...
...
xs
80
...
... ... ... ... ...
... 10
... ... ...
...
ao
...
80 80 80
...
... 30 40
STD
4
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
SI Units
ao 80
PIPE
WELDED STEEL AND WROUGHT SEAMLESS
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customary Units Outside Wall End Plain NPS Diameter, Thickness,Weight, In. lblft [Note (1 II in.
Identification [Standard (STDL Extra-Strong (XS), or Double Extra Strong [XXSll
SI Units End Plain WallOutside Schedule DN Diameter, Thickness, mm mm No. [Note (211
...
...
3.500 3.500 3.500 3.500 3.500
0.250 0.281 0.300 0.438 0.600
8.69 9.67 10.26 14.34 18.60
4.000 4.000 4.000 4.000
0.083
... ... ...
...
0.125
3.48 4.53 4.98 5.18
...
o.1 o9 o.120
4.000 4.000 4.000 4.000
0.141 0.156 0.172 O.188
5.82 6.41 7.04 7.66
...
...
...
...
4.000 4.000 4.000 4.000
0.226 0.250 0.281 0.318
9.12 10.02 11.17 12.52
STD
4.500 4.500 4.500 4.500
0.083 0.109 0.120 0.125
3.92 5.1 2 5.62 5.85
...
4.500 4.500 4.500 4.500
0.141 0.156 O.172 O.188
6.57 7.24 7.96 8.67
4.500 4.500 4.500 4.500
0.203 0.219 0.237 0.250
9.32 10.02 10.80 11.36
4.500 4.500 4.500 4.500
0.281 0.312 0.337 0.438
12.67 13.97 15.00 19.02
4.500 4.500
0.531 0.674
22.53 27.57
5.563 5.563 5.563 5.563
0.083 0.109 O.125 0.134
5.563 5.563 5.563 5.563
0.1 56 0.1 88 0.219 0.258
... xs ...
... 80 160
...
xxs
5
10
...
...
...
...
30 40
... ...
...
...
xs
80
5
...
...
... ...
...
...
10
...
... ... ...
... ... 30
...
... ...
... STD
40
...
...
... ... xs
... ...
Mass, kglm
80 80 80 80 80
88.9 88.9 88.9 88.9 88.9
6.35 7.14 7.62 11.13 15.24
12.93 14.40 15.27 21.35 27.68
90 90 90 90
101.6 101.6 101.6 101.6
2.1 1 2.77 3.05 3.18
5.18 6.75 7.41 7.72
90 90 90 90
101.6 101.6 101.6 101.6
3.58 3.96 4.37 4.78
8.65 9.54 10.48 11.41
90 90 90 90
101.6 101.6 101.6 101.6
5.74 6.35 7.14 8.08
13.57 14.92 16.63 18.64
1 O0 1 O0 1 O0 1 O0
114.3 114.3 1 14.3 1 14.3
2.1 1 2.77 3.05 3.18
5.84 7.62 8.37 8.71
1 O0 1 O0 1 O0 1 O0
1 14.3 1 14.3
114.3 114.3
3.58 3.96 4.37 4.78
9.78 10.78 11.85 12.91
1 O0 1 O0 1O0 1 O0
114.3 114.3 114.3 114.3
5.16 5.56 6.02 6.35
13.89 14.91 16.08 16.91
1 O0 1 O0 1 O0 1 O0
114.3 114.3 114.3 114.3
7.14 7.92 8.56 11.13
18.87 20.78 22.32 28.32
...
80 120
...
160
1 O0 1 O0
114.3 114.3
13.49 17.12
33.54 41 .O3
4.86 6.36 7.27 7.78
...
...
125 125 125 125
141.3 141.3 141.3 141.3
2.11 2.77 3.18 3.40
7.24 9.46 10.83 1 1.56
9.02 10.80 12.51 14.63
... ... ...
... ...
STD
40
125 125 125 125
141.3 141.3 141.3 141.3
3.96 4.78 5.56 6.55
13.41 16.09 18.61 21.77
xxs
...
...
5
*..
...
...
10
...
5
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
B36.10M-2000 ASME
WELDED AND WROUGHT SEAMLESS
PIPE
STEEL
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Identification [Standard (STD), (XS), or Double Extra Strong (XXSH
Customary Units Outside Extra-Strong End Plain Wall Diameter, NPS Thickness,Weight, in. lblft [Note (111 in.
17.51 20.80 27.06 32.99 38.59
5 0.312 5 19.19 5 0.344 0.375 5 0.500 5 0.625 5 0.750 5
25.05 28.60
6.625 6.625 6.625 6.625
0.083 0.109 0.125 0.134
5.80 7.59 8.69 9.30
6 6 6 6
6.625 6.625 6.625 6.625
0.141 0.156 0.172 0.188
9.77 10.79 11.87 12.94
60.312 6 0.375 6 0.432 6 6 6 6
45.39 47.10 53.21 53.78
11.36 14.12
12.70 15.88
6 6 6 6
13.94 60.203 15.00 0.219 6 17.04 60.250 18.99 60.280 21
... ... xs
40.28 49.12
5.563 5.563 5.563
0.719 6 0.750 6 0.864 6 0.875 6
6.625 6.625 6.625 6.625 28.26 6.625 6.625 6.625 6.625 6.625 6.625 6.625
9.92 8 0.109 8.625 25 8 0.1 8.625 8 8.625 56 8 0.1 8.625 8 8 8 8
24.72 0.277 8 27.73 0.312 8 28.58 80.322 , 8
8.625 8.625 8.625 8.625 8.625 8.625 8.625 8.625
1
67.57
0.188 0.203 0.219 0.250
... 5 ...
150 150 150
168.3 168.3 168.3 168.3
2.1 1 2.77 3.1 8 3.40
8.65 11.31 12.95 13.83
... ... ..* ...
150 150 150 150
168.3 168.3 168.3 168.3
3.58 3.96 4.37 4.78
14.54 16.05 17.67 19.28
.168.3 .. 168.3 ... .168.3 .. 40
150 150 150
5.1 6 5.56
20.76
22.31
.168.3 .. 168.3 ... 37.31 ... 42.56 80
150 150 150 9.53 150 10.97
168.3 168.3 168.3
12.70 14.27 15.88
48.73 54.21 59.69
2.77 3.18 3.76 3.96
14.78 16.93 19.97 21.01
4.78 5.16 5.56 6.35
25.26 27.22 29.28 33.32
150
...
... ...
...
.25.36 .. 168.3 STD ... xs
... ... ...
18.26
168.3. . . 70.12 ... 79.22 xxs 80.08
... ... ... ...
13.41
150 19.05 21.95 22.23
150
160 168.3 ... 168.3 ... 168.3 ...
150 150 150
...
200
...
200 200 200 200
219.1 219.1 219.1 219.1
10
...
...
20 7.04 7.92 200 8.74
6
200 200
168.3 168.3
219.1 219.1 219.1 219.1
...
...
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
...
5
200
150
120
...
... ...
36.82... 41.25 8.18 219.1 STD 45.34. . .
10
... 150
...
16.96 18.28 19.68 22:38
42.55 30.45
6.35 150
.31.33 .. 7.92 34.39... 8.74
...
0.344
125
...
32.74 36.43 40.09
23.62 26.05 28.57 30.97
120 160 141.3 ...
...
.O6 23.10
7.14 7.92 8.74 9.53
125 125 19.05
... ...
7.1
141.3 141.3 141.3 141.3
80
...
0.500 0.562 0.625
0.148
...
125 125 125
Mass, kglm
125
...
0.344
6.625 6.625 6.625 6.625
141.3... 141.3. . . 57.43 xxs
Outside End Plain Wall Schedule DN Diameter, Thlickness, mm mm No. [Note (211
... ...
...
5.563 15.87 0.281 5.563 5.563 5.563
SI Units
219.1 30 219.1 ... 40 219.1 ...
200 200 200
WELDED AND WROUGHT SEAMLESS
PIPE
STEEL
ASME B36.1OM-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customary Units Extra-Strong End Plain WallOutside NPS Diameter, Thickness,Weight, [Note (111 in. in. lblft
Identification [Standard (STD), (XS), or Double Extra Strong (XXS)]
8.625 8.625 8.625 8.625
0.375 0.406 0.438 0.500
33.07 35.67 38.33 43.43
8 8 8 8
8.625 8.625 8.625 8.625
0.562 0.594 0.625 0.719
48.44 51.O0 53.45 60.77
...
8 8 8 8 8
8.625 8.625 8.625 8.625 8.625
0.750 0.812 0.875 0.906 1.o00
63.14 67.82 72.49 74.76 81.51
...
10 10 10 10
10.750 10.750 10.750 10.750
0.134 0.156 0.165 0.188
15.21 17.67 18.67 21.23
...
10 10 10 10
10.750 10.750 10.750 10.750
0.203 0.219 0.250 0.279
22.89 24.65 28.06 31.23
*..
10 10 10 10
10.750 10.750 10.750 10.750
0.307 0.344 0.365 0.438
34.27 38.27 40.52 48.28
...
10 10 10 10
10.750 10.750 10.750 10.750
0.500 0.562 0.594 0.625
10 10 10 10
10.750 10.750 10.750 10.750
10 10 10 10 12 12 12 12
Schedule No. [Note
...
... ...
8 8 8 8
SI Units
60
...
...
xs
80
...
... ...
1O0
...
...
120
...
... xxs ...
140
...
160
...
... 5
...
...
... ...
10
...
...
... ... ...
... 20
... 30
...
...
STD
40
...
...
54.79 61.21 64.49 67.65
xs ...
...
...
...
0.719 0.812 0.844 0.875
77.10 86.26 89.38 92.37
...
1O0
10.750 10.750 10.750 10.750
0.938 1.o00 1.125 1.250
98.39 104.23 115.75 126.94
12.750 12.750 12.750 12.750
0.1 56 0.1 72 0.180 0.188
2 1 .o0 23.13 24.1 9 25.25
60
...
80
...
...
...
120
...
...
...
...
...
140 160
xxs
...
...
...
5
...
... ...
10
*..
... 7
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
Wall End Plain Outside DN Diameter, Thickness, Mass, mm mm (211 kglm
200 200 200 200
219.1 219.1 219.1 219.1
9.53 10.31 11.13 12.70
49.25 53.09 57.08 64.64
200 200 200 200
219.1 219.1 219.1 219.1
14.27 15.09 15.88 18.26
72.08 75.92 79.59 90.44
200 200 200 200 200
219.1 219.1 219.1 219.1 219.1
19.05 20.62 22.23 23.01 25.40
93.98 100.93 107.93 111.27 121.33
250 250 250 250
273.0 273.0 273.0 273.0
3.40 3.96 4.19 4.78
22.61 26.27 27.78 31.62
250 250 250 250
273.0 273.0 273.0 273.0
5.16 5.56 6.35 7.09
34.08 36.67 41.76 46.49
250 250 250 250
273.0 273.0 273.0 273.0
7.80 8.74 9.27 11.13
51.01 56.96 60.29 71.88
250 250 250 250
273.0 273.0 273.0 273.0
12.70 14.27 15.09 15.88
81.53 91.O5 95.98 100.69
250 250 250 250
273.0 273.0 273.0 273.0
18.26 20.62 21-44 22.23
114.71 128.34 133.01 137.48
250 250 250 250
273.0 273.0 273.0 273.0
23.83 25.40 28.58 31.75
146.43 155.1O 172.27 188.90
300 300 300 300
323.8 323.8 323.8 323.8
3.96 4.37 4.57 4.78
31.24 34.43 35.98 37.61
S T D * A S M E B3b.LOM-ENGL
2000
m
0757b70 Ob21745
5b0
AND SEAMLESS STEEL WROUGHT
WELDED 636.10M-2000 ASME
PIPE
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customary Units Wall Plain End Outside NPS Diameter, Thickness,Weight, [Note (111 in. in. lblft
Identification [Standard (STD). Extra-Strong (XS). or Double Extra Strong (XXS)I
Schedule No. [Note
...
...
12 12 12 12
12.750 12.750 12.750 12.750
0.203 0.219 0.250 0.281
27.23 29.34 33.41 37.46
12 12 12 12
12.750 12.750 12.750 12.750
0.312 0.330 0.344 0.375
41.48 43.81 45.62 49.61
12 12 12 12
12.750 12.750 12.750 12.750
0.406 0.438 0.500 0.562
53.57 57.65 65.48 73.22
12 12 12 12
12.750 12.750 12.750 12.750
0.625 0.688 0.750 0.812
81.O1 88.71 96.21 103.63
12 12 12 12
12.750 12.750 12.750 12.750
0.844 0.875 0.938 1.o00
107.42 111.08 118.44 125.61
12 12 12 12
12.750 12.750 12.750 12.750
1.O62 1.125 1.250 1.312
132.69 139.81 153.67 160.42
... ... ...
14 14 14 14
14.000 14.000 14.000 14.000
0.156
...
0.203 0.210
23.09 27.76 29.94 30.96
14 14 14 14
14.000 14.000 14.000 14.000
0.219 0.250 0.281 0.312
32.26 36.75 41.21 45.65
...
14 14 14 14
14.000 14.000 14.000 14.000
0.344 0.375 0.406 0.438
50.22 54.62 59.00 63.50
14 14 14 14
14.000 14.000 14.000 14.000
0.469 0.500 0.562 O. 594
67.84 72.16 80.73 85.13
14 14 14 14
14.000 14.000 14.000 14.000
0.625 0.688 0.750 0.812
89.36 97.91 106.23 114.48
O. 188
... 300
...
300
... ...
300
... xs
300
...
300
30
...
300
...
... ...
... xxs
350
120.59 132.05 143.17 154.17
355.6 355.6 355.6 355.6
3.96 4.78 5.16 5.33
34.34 41.36 44.59 46.04
355.6 355.6 355.6 355.6
5.56 6.35 7.14 7.92
48.00 54.69 61.36 67.91
355.6 355.6 355.6 355.6
8.74 9.53 10.31 11.13
74.76 81.33 87.79 94.55
350 350 350 350
355.6 355.6 355.6 355.6
11.91 12.70 14.27 15.09
100.95 107.40 120.12 126.72
350 350
355.6 355.6 355.6 355.6
15.88 17.48 19.05 20.62
133.04 145.76 158.11 170.34
300
5
... ... ...
350 350 350
...
350
10 350
20 350
30
...
350
40
...
...
...
... ...
...
...
60
... 350
15.88 17.48 19.05 20.62
197.43 208.08 228.68 238.69
xs ... ...
...
323.8 323.8 323.8 323.8
26.97 28.58 31.75 33.32
...
...
79.71 85.82 97.44 108.93
323.8 323.8 323.8 323.8
...
...
10.31 11.13 12.70 14.27
300
* , .
350
323.8 323.8 323.8 323.8
159.87 165.33 176.29 186.92
160
STD
61.70 65.19 67.91 73.86
21.44 22.23 23.83 25.40
300
350
7.92 8.38 8.74 9.53
323.8 323.8 323.8 323.8
...
...
323.8 323.8 323.8 323.8
300 300 300
140
...
40.55 43.64 49.71 55.76
1O0 ...
300
350
5.16 5.56 6.35 7.14
300 300
...
...
323.8 323.8 323.8 323.8
... ...
120
...
300
80
300
350
300 300
60
...
...
300 300
40
...
...
300 300
20
... 300
Wall Plain End Outside DN Diameter, Thickness, Mass, mm kglm mm (211
...
...
STD
8
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
SI Units
80
...
350
PIPE
WELDED STEEL AND WROUGHT SEAMLESS
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI Customary Units Outside Wall Plain End NPS Diameter, Thickness,Weight, [Note ( l b 1 in. in. Iblft
16.000 16.000
16.000 16.000
16.000 16.000
Identification [Standard (STDI, Extra-Strong (XS), or Double Extra Strong (XXS)]
14.000 14.000 14.000 14.000
0.875 0.938 1.000 1.062
122.77 130.98 138.97 146.88
14 14 14 14
14.000 14.000 14.000 14.000
1.094 1.125 1.250 1.406
150.93 154.84 170.37 189.29
14 14 14 14
14.000 14.000 14.000 14.000
2.000 2.125 2.200 2.500
256.56 269.76 277.51 307.34
...
16 16 16 16
16.000
27.93 31.78 34.28 36.95
... ...
16.000
0.1 65 O. 188 0.203 0.219
16 16 16 16
16.000 16.000 16.000 16.000
0.250 0.281 0.312 0.344
350 350 350 350
355.6 355.6 355.6 355.6
22.23 23.83 25.40 26.97
182.76 194.98 206.84 218.58
355.6 355.6 355.6 355.6
27.79 28.58 31.75 35.71
224.66 230.49 253.58 281.72
350 350 350 350
355.6 355.6 355.6 355.6
50.80 53.98 55.88 63.50
381.85 401.52 413.04 457.43
...
... ...
400 400 400
406.4 406.4 406.4 406.4
4.19 4.78 5.16 5.56
41.56 47.34 51.O6 54.96
42.09 47.22 52.32 57.57
... ... ...
...
10
400 400 400 400
406.4 406.4 406.4 406.4
6.35 7.14 7.92 8.74
62.65 70.30 77.83 85.71
62.64 67.68 72.86 77.87
STD
400 400 400
406.4 406.4 406.4 406.4
9.53 10.31 11.13 11.91
93.27 100.71 108.49 115.87
xs
406.4 406.4 406.4 406.4
12.70 14.27 15.88 16.66
123.31 138.00 152.94 160.13
400 400 400
406.4 406.4 406.4 406.4
17.48 19.05 20.62 21.44
167.66 181.98 196.18 203.54
400 400 400 400
406.4 406.4 406.4 406.4
22.23 23.83 25.40 26.19
210.61 224.83 238.66 245.57
400 400 400
406.4 406.4 406.4 406.4
26.97 28.58 30.18 30.96
252.37 266.30 280.01 286.66
400
406.4 406.4 406.4
31.75 36.53 40.49
293.35 333.21 365.38
16 16 16 16
16.000
0.375 0.406 0.438 0.469
16 16 16 16
16.000 16.000 16.000 16.000
0.500 0.562 0.625 0.656
82.85 92.75 102.72 107.60
16 16 16 16
16.000 16.000 16.000
0.688 0.750 0.812 0.844
112.62 122.27 131.84 136.74
16.000
Outside Wall Plain End Schedule DN Mass, Diameter, Thickness, mm kglm mm No. [Note (211
...
... ...
14 14 14 14
SI Units
16 16 16 16
16.000 16.000 16.000
0.875 0.938 1.000 1.031
141.48 151.03 160.35 164.98
16 16 16 16
16.000 16.000 16.000 16.000
1.062 1.125 1.188 1.219
169.59 178.89 188.11 192.61
16 16 16
16.000 16.000 16.000
1.250 1.438 1.594
197.10 223.85 245.48
1O0
... ... ...
... ...
350
... ... ...
350 350
...
... ...
... 400
5
...
...
20
... 400
... ...
30
...
... ...
... 400
...
... ... ...
40
... ...
400
400
80
... ...
...
...
...
1O0
...
...
...
... ...
... 400
120
400 400
140 160
... ...
400 400
60
... ... ...
... ...
350
140 160
... ...
...
9
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
120
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI Customary Units Outside Diameter, NPS in. [Note (111
in.
Wall Plain End Thickness, Weight, lblft
Identification [Standard (STDI, Extra-Strong (XSI, Schedule Double Extra or Strong (XXS1I
SI Units
[Note No.
18 18 18 18
18.000 18.000 18.000 18.000
0.1 65 0.1 88 0.219 0.250
457 31.46 35.80 41.63 47.44
. .450 . ... ...
457 457 457
18 18 18 18
18.000 18.000 18.000 18.000
0.281 0.312 0.344 0.375
53.23 58.99 457 64.93 70.65
...
457
18 18 18 18
18.000 18.000 18.000 18.000
0.406 0.438 0.469 0.500
76.36 82.23 457 87.89 93.54
18 18 18 18
18.000 18.000 18.000 18.000
0.562 0.625 0.688 0.750
104.76 457 11 6.09 127.32 138.30 457
18 18 18 18
18.000 18.000 18.000 18.000
0.812 0.875 0.938 1.000
149.20 160.18 171.08 181.73
18 18 18 18
18.000 18.000 18.000 18.000
1.O62 1.125 1.156 1.188
192.29 202.94 208.1 5 213.51
18 18 18 18
18.000 18.000 18.000 18.000
1.250 1.375 1.562 1.781
223.82 244.37 457 274.48 457 308.79 457
20 20 20 20
20.000 20.000 20.000 20.000
0.188 0.219 0.250 0.281
39.82 46.31 52.78 59.23
... ... ... ...
20 20 20 20
20.000 20.000 20.000 20.000
0.312 0.344 0.375 0.406
65.66 72.28 78.67 508 85.04
... ...
20 20 20 20
20.000 20.000 20.000 20.000
0.438 0.469 0.500 0.562
91.59 97.92 104.23 116.78
... ... xs ...
20 20 20 20
20.000 20.000 20.000 20.000
0.594 0.625 0.688 0.750
123.23 508 129.45 142.03 154.34. . .
. . .500 ...
5
...
. . .450 ...
... ... 10
450 450 450
...
450
20
STD
... . . .450 ...
xs
457 . . . 457 . . .
450 450
457 . . . 30 457 . . . 457 . . .
450
. . .450
450 450
40
... ...
457 457
...450
... ...
450 450
60
... ... ... ...
80
...
457 457 457 457
450 450 450 450
.457 .. .457 ..
450 450 1O0 457 450 .457 .. 450
... ... ...
457 . . . 120 140 160
. . . 450 ... 450
. . . 450 500
STD500
...
450
5
...
500
500
10
...
500
508 ... 508 . . . 20 508 . . .
500 500
...
500 500 500 500
... 30
...
... ...
... ...
.
508 508 508 508
500
40
508 508 508
10
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
Wall Plain End Outside Mass, DN Diameter, Thickness, mm kglm (211 mm -
500 500 500
508 508 508 508
4.1 9 4.78 5.56 6.35
46.79 53.31 61.90 70.57
7.14 7.92 8.74 9.53
79.21 87.71 96.62 105.17
10.31 11.13 11.91 12.70
113.58 122.38 130.73 139.1 6
14.27 15.88 17.48 19.05
155.81 172.75 189.47 205.75
20.62 22.23 23.83 25.40
221.91 238.35 254.57 270.36
26.97 28.58 29.36 30.18
286.02 301.96 309.64 317.68
31.75 34.93 39.67 45.24
332.97 363.58 408.28 459.39
4.78 5.56 6.35 7.14
59.32 68.89 78.56 88.19
7.92 8.74 9.53 10.31
97.68 107.61 117.15 126.54
11.13 11.91 12.70 14.27
136.38 145.71 155.13 173.75
15.09 15.88 17.48 19.05
183.43 192.73 211.45 229.71
STD-ASME B3b-LOM-ENGL
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME 836.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Identification [Standard Extra-Strong (XS). or Double Extra Strong (XXSII
Customary Units (STD). Outside Wall End Plain NPS Diameter. Thickness.Weight. in lblft in [Note (1 I1
.
12
.
20.000 20 20 178.89 0.875 20.000 191.14 20 0.938 20.000 20 1.000 20.000 203.1 20.000 20.000 20.000 20.000
20 20 20 20
... ... ... ...
1
1.031 1 .062 1.125 1.188
... ...
500
... ...
20.000 20 20 341.41 1.750 379.53 20 1.969
84 0.18822.000
22 22 22 22
...
500
... 50.99 0.219 22.000 58.13 0.250 22.000 65.24 0.281 22.000
559
79.64
0.500
114.92
5
...
...
...
10
...
0.875 0.938 1.000 1.062 1.125
197.60 211.19 224.49 237.70 251.05
22.000 22 22.000 22 22.000 22 22.000 22 22.000 22
1.188 1.250 1.312 1.375 1.438
264.31 277.27 290.15 303.16 316.08
... 97.17 ... 7.14
559
311.19 319.94 337.91 355.63
...
20
... ...
...
... ...
... 30 ...
xs
...
...
... ... ...
... ... ...
559 559 ... 559 ... 273.78 20.62 559
212.70 15.88 233.44 17.48 253.67 19.05
... ...
...
... ...
... ...
...
80
...
...
... ... ... ...
1 O0
...
...
150.38 11.13 160.69 11.91 171.10 12.70 191.70 14.27
60
... ...
...
559 559 559 559
... ...
...
...
107.64 7.92 118.60 8.74
...
... ...
... ...
75.895.56 86.55 6.35
559
...
11
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
...
...
...
...
22.000 22 22.000 22 22.000 22 22.000 22 22.000 22
26.19 26.97 28.58 30.18
...65.334.78 559
559 559 ... 129.14 9.53 559 139.51 ... 10.31 559
...
... ... ...
22.000 156.74 0.688 170.37 22.000 0.750 183.92 22.000 0.812
508 508 508 508
120 441.52 38.10508 500 140 508.15 44.45508 500 160 564.85 50.01508
... ... ... STD
93.72
500 500 500
.31.75 . . 508 500 372.91 1 O0 500 381.55 32.54 508 ... 390.05 33.32508 500 . . . 508 500 407.51 34.93
...
20.000 20.000
00.960.43822.000 22 22 0.469 22.000 107.95 22 22.000 22 0.56222.000 128.79 22 22 22 22
...
Mass. kglm
500 500 500 500
80
...
...
...
2 22.000 22 22.000 22 86.69 0.375 22.000 22 0.406 22.000 22
2.810.62522.000
500
... ...
0.551.25020.000 20 20 1.28120.000 256.34 20 262.10 1.312 20.000 20 273.76 1.375 20.000
.
60 508 247.84 20.62 ... 508 266.31 22.23 ... 284.54 23.83508 ... 302.30 25.40508
... ...
209.06 215.00 227.00 238.91
SI Units End Plain WallOutside Schedule DN Diameter. Thickness. mm mm No [Note (211
...
559 559 559 559 559
22.23 23.83 25.40 26.97 28.58
294.27 314.51 334.25 353.86 373.85
559 559 559 559 559
30.18 31.75 33.32 34.93 36.53
393.59 41 2.84 431.96 451.45 470.69
AND SEAMLESS WROUGHT STEEL PIPE
WELDED B36.10M-2000 ASME
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'O) Customarv Units Outside Diameter, NPS rNote IlIl
22.000 22.000 22.000 22.000
63.47 0.281 24.000 0.31 24.000 0.344
.406
24.000 94.71 24.000 110.32 24.000 24.000 24.000
in.
1.500 1.625 1.875 2.125
22 22 22 22 55.42 24 0.21824.000 24 0.250 24.000 24 24 24 24 0.375 24 24 0.438 24 24 24 24
Wall Plain End Thickness, Weight, in. lblft
Identification [Standard (STD), Extra-Strong (XS), Double Schedule Extra or Strong (XXS)I
328.72 353.94 403.38 451.49
...
... ... 600 600
... ... 610 STD
24.000
...
24.000
...
117.98 125.61 140.81 156.17
... xs ...
... ...
600 600
.61 ..
600
20 152.48 ... 610 ...
...
... ...
10.31 600 600 600 600
23.83 24.61 25.40 26.97
344.48 355.28 366.19 387.79
61O 610 610 610
28.58 30.18 30.96
409.80 431.55 442.1 1 452.77
33.32 34.93 36.53 38.1O
473.87 495.38 51 6.63 537.36
610 610 610 610 61O
59.54
547.74 557.97 640.07 720.1 9 808.27
660 660 660 660
102.366.35 114.96 7.14 127.367.92 140.378.74
...
600 600
...
...
...
600 31.75
24.000 24.000 24.000 24.000
24 24 24 24
1.312 1.375 1.438 1.500
318.21 332.56 346.83 360.79
... ... ...
610 ... 610 ... 610 ... 610 ...
600 600 600 600
1.531 1.562 1.812 2.062 2.344
367.74 374.66 429.79 483.57 542.64
...
1O0
24.000 24.000
24 24 24 24 24
600 38.89 39.67 600 46.02 52.37
26 26 26 26
94.35
60
... 80
...
120 140 160
0.281
...
... ...
0.344
...
...
...
77.26
...
10
12
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
175.67 187.07 209.65 232.67
61O 61O 61O 61O
275.10 289.71 296.86 304.00
...
11.91 12.70 14.27 15.88
600
1.125 1.188 1.219 1.250
600 600 600
11.13
...
24 24 24 24
... ...
8.74 9.53
255.43 277.63 299.71 322.23
600 600
...
129.60 O 141.12 610 164.38
17.48 19.05 20.62 22.23
24.000 24.000 24.000 24.000
24,000 24.000 24.000
82.58 94.53 106.15 117.60
61O 61O 61O 61O
... ...
...
5.54 6.35 7.14 7.92
600 600 600 600
...
600
61O 61O 610 610
40
24.000 24.000
...
489.44
... ... ...
...
...
O
600
30
231.25 238.57 245.87 260.41
600
559 559 559 559
...
0.938 0.969 1.000 1.062
... ...
kglm
610 610 610 61O
... 600
. . . 38.1 41.28 ... 47.63 ... 53.98 ...
5 10
...
...
Wall Outside DN Diameter, Thickness, Mass. [Note (211 mm mm
24 24 24 24
68.82 0.25026.000 26.000 0.312 26.000 26.000
24.000 24.000
600
..,
171.45 240.688 24.000 24 186.41 0.750 24.000 201.28 240.812 24.000 216.31 240.875 24.000
No. 527.05 120 600.67 140 672.30 160
24.000
0.469 0.500 0.562 0.625
Plain
...
... 79.01
End
...
... ... 2
SI Units
...
... ... ...
S T D - A S M E B 3 b - L O M - E N G L 2000 D 0759b70 Ob21950 928 m
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customary Units Wall Plain End Outside NPS Diameter, Thickness,Weight, [Note (111 in. in. lblft 26.000 26.000 26.000
26.000 26.000 26.000
26 26 26 26 26 26 26 26
Identification [Standard (STDI, Extra-Strong (XS], or Double Extra Strong (XXSII
102.72 111.08 119.69 128.00
STO
26.000
0.375 0.406 0.438 0.469
26.000 26.000 26.000 26.000
0.500 0.562 0.625 0.688
136.30 152.83 169.54 186.16
xs
0.750 0.812 0.875 0.938 1.000
202.44 218.64 235.01 251.30 267.25
...
SI Units Outside Wall Plain End Schedule DN Mass, Diameter, Thickness, No. [Note (211 kglm mm mm
...
...
...
...
... ...
20
...
...
... ... ...
...
...
...
26.000
26 26 26 26 26
28.000 28.000 28.000 28.000
28 28 28 28
0.250 0.281 0.312 0.344
74.16 83.26 92.35 101.70
... ...
...
...
28.000 28.000 28.000 28.000
28 28 28 28
0.375 0.406 0.438 0.469
110.74 119.76 129.05 138.03
STD
...
28 28 28 28
28.000
0.500 0.562 0.625 0.688
146.99 164.84 182.90 200.87
xs
28.000 28.000
28 28 28 28 28
28.000
0.750 0.812 0.875 0.938 1.000
218.48 236.00 253.72 271.36 288.63
...
0.250 0.281 0.312 0.344
79.51 89.27 99.02 109.06
28.000 28.000 28.000 28.000 30.000
26.000
28.000
30.000 30.000
30 30 30 30
30.000 30.000 30.000 30.000
30 30 30 30
0.375 0.406 0.438 0.469
30.000 30.000 30.000 30.000
30 30 30 30
0.500 0.562 0.625 0.688
30.000
... ... ... ... ...
... ... ... ...
...
...
10
... ...
10
... ... 7.14 ...
...
118.76 128.44 138.42 148.06
STD
... ... ... ...
...
157.68 176.86 196.26 215.58
xs
20
... 30
...
13
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
19.05 20.62 22.23 23.83 25.40
301.12 325.14 349.64 373.87 397.51
71 71 71 71
7.14
110.35 123.94 137.32 151.37
325.08 351.O7 377.60 403.84 429.46
...
...
660 660 660 660 660
700 19.051 71 700 20.62 711 700 22.23 711 700 71 1 700 71 1
5
...
202.74 227.25 252.25 276.98
... ... ... ... ... ...
... ... ...
1 1 1 1
12.70 14.27 15.88 17.48
...
30
... ... ...
700 6.35 700 700 7.92 700 8.74
660 660 660 660
218.71 245.19 272.23 298.96
20
...
... ...
... ... ... ... ... ...
152.88 165.19 178.10 190.36
12.701 71 700 700 14.271 71 700 15.88 711 700 17.48 711
...
... ...
...
9.53 10.31 11.13 11.91
164.86 178.16 192.10 205.34
...
...
...
660 660 660 660
700 9.5371 1 10.311 71 700 700 11.13 71 1 700 11.911 71
...
...
...
... 8.74
762 762 762 762
23.83 25.40 6.35 7.92
... ...
762 762 762 762
11.13 11.S1
176.85 191.12 206.10 220.32
... ... ... ...
762 762 762 762
12.70 14.27 15.88 17.48
234.68 263.14 292.20 320.95
. .10.31 .
9.53
118.34 132.92 147.29 162.36
STDOASME B 3 b - L O H - E N G L 2000 W 0 7 5 7 b 7 0 Ob21752 Bblf
ASME B36.10M-2000
m
WELDED AND SEAMLESS WROUGHT STEEL PIPE
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI Customary Units Outside Diameter. NPS [Note (1)I
30.000 30.000 30.000 30.000
30 30 30 30
30.000
30 30 30 30 30
30.000 30.000 30.000 32.000 32.000
126.78
0.375 32 32 32 32.000 32
0.750 0.812 0.875 0.938 310.01 328.53 30.000 347.26 365.90 384.17
32.000 32.000 32.000 32.000 32.000
.
234.51 253.36 272.43 291.41
1.000 1.062 1.125 1.188 1.250
. .
0.406 0.438 0.469
137.12 147.78 158.08
No.
... ...
... ...
... ... ... ...
...26.97 . . 28.58 .
461.41 488.88 516.93 544.68 571.79
... ...
...
800 800 800 800
813 813 813 813
6.35 7.14 7.92 8.74
126.32 141.90 157.25 173.35
800 800 800 800
813 813 813 813
188.839.53 10.31 11.13 11.91
204.09 220.10 235.29
800 800 800 800
81 3 813 813 813
12.70 14.27 15.88 17.48
250.65 281.09 312.17 342.94
813
373.00 402.94
493.35 522.80 552.88 582.64 61 1.72
10
STD
...
... ...
...
...
...
...
...
32.000 32.000 32.000 32.000
32 32 32 32
0.750 0.812
250.55 270.72
...
...
0.938
311.47
32.000 32.000 32.000 32.000 32.000
32 32 32 32 32
1.000 1.062 1.125 1.188 1.250
331.39 351.23 371.31 391.30 410.90
... ...
34.000
34 34 34 34
0.250 0.281 0.312
90.20 101.29 112.36
... ... ... ...
20
... ... ...
... ... ...
... ...
...
... ...
...
...
... ...
... 10
...
433.52 813 3 81
19.05 20.62 22.23 23.83
800 800 800 800 800
813 813 813 813 813
25.40 26.97 28.58 30.18 31.75
...
864 864 864 864
134.31 6.35 7.14 7.92 8.74
864 864 234.10864 864
9.53 10.31 11.13 250.27 11.91
200.82 217.06
864 864 864 864
12.70 14.27 15.88 17.48
266.63 299.04 332.14 364.92
...
... ...
... ... ... ...
...
xs ...
20
...
...
30 40
... ... ...
...
14
30.1 8
800 3 81800 800 800
... ... ...
STD
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
25.40
... ...
30 40
179.06 200.89 222.99 245.00
349.04
... ...
...
0.500 0.562 0.625 0.688
19.05 377.01 20.62 405.56 22.23 433.81 23.83
...31.75
...
34.000 34.000 34.000 34.000
762 762 762 762
...
...
xs ...
34 34 34 34
...
.
Mass
...
168.37 188.87 209.62 230.29
0.438
...
.
762 762 762 762 762
0.500 0.562 0.625 0.688
0.375 34 34.000 0.406 34 34.000 34 157.14 34.000 0.469 34 34.000
...
... ... ...
32 32 32 32
34.000 34.000 34.000
Plain Wall Outside DN Diameter. Thickness [Note (211 mm kg/m mm
...
... 84.85 95.28 105.69 116.41
End
... ... ... ...
...
0.250 0.281 0.312 0.344
SI Units
32.000 32.000 32.000 32.000
0.344
34.79
32 32 32 32
in.
Wall Plain End Thickness. Weight in. lblft
Identification [Standard (STDI Extra-Strong (XSI or Double Extra Schedule Strong (XXS)I
... ... ...
...
463.78
150.88 167.21 184.34
S T D - A S M E B3b.LOM-ENGL
2000
m 0759b70 Ob2L952
PIPE
WELDEDSTEEL AND WROUGHT SEAMLESS
7T0
m
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customarv Units Outside Wall Plain End NPS Diameter, Thickness,Weight, [Note (1 11 in. in. lblft
Identification [Standard (STD), Extra-Strong (XS), or Double Extra Strong [XXS)]
34 34 34 34
34.000 34.000 34.000 34.000
0.750 0.812 0.875 0.938
266.58 288.08 309.84 331.52
...
34 34 34 34 34
34.000 34.000 34.000 34.000 34.000
1 .o00 1 .O62
1.125 1.188 1.250
352.77 373.94 395.36 416.70 437.62
... ... ...
36 36 36 36
36.000 36.000 36.000 36.000
0.250 0.281 0.312 0.344
95.54 107.30 119.03 131.12
...
36 36 36 36
36.000 36.000 36.000 36.000
0.375 0.406 0.438 0.469
142.81 154.48 166.51 178.14
STD
36 36 36 36
36.000 36.000 36.000 36.000
0.500 0.562 0.625 0.688
189.75 212.90 236.35 259.71
xs ... ... ...
36 36 36 36
36.000 36.000 36.000 36.000
0.750 0.812 0.875 0.938
282.62 305.44 328.55 351.57
... ... ... ...
36 36 36 36 36
36.000 36.000 36.000 36.000 36.000
1 .o00 1 .O62 1.125 1.188 1.250
374.15 396.64 419.42 442.10 464.35
38 38 38 38
38.000 38.000 38.000 38.000
0.312 0.344 0.375 0.406
125.70 138.47 150.83 163.16
38 38 38 38
38.000 38.000 38.000 38.000
0.438 0.469 0.500 0.562
175.87 188.17 200.44 224.92
38 38 38 38
38.000 38.000 38.000 38.000
0.625 0.688 0.750 0.812
249.71 274.42 298.65 322.80
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
SI Units Schedule No. [Note
...
...
...
... ... ... ...
...
... ...
900
... ... ...
900 900 900
...
...
...
... STD
... xs
...
... ...
... ... ... ... ... ... ...
...
Outside End Plain Wall DN Diameter, Thickness, mm mm (211
... ...
...
864 864 864 86.4
... ...
... ...
... 900 900
Mass, kglm
19.05 20.62 22.23 23.83
396.96 428.88 461.48 493.75
25.40 26.97 28.58 30.18 31.75
525.30 556.73 588.83 620.60 651.65
6.35 7.14 7.92 8.74
142.14 159.68 176.97 195.12
...
900
914 914 914 914
... ... ... ...
900 900 900 900
914 914 914 914
9.53 10.31 11.13 11.91
212.57 229.77 247.82 264.96
900
914 914 914 914
12.70 14.27 15.88 17.48
282.29 316.63 351.73 386.47
... ... ...
900 900 900
914 914 914 914
19.05 20.62 22.23 23.83
420.45 454.30 488.89 523.14
...
900 900 900 900 900
914 914 914 914 914
25.40 26.97 28.58 30.18 31.75
556.62 589.98 624.07 657.81 690.80
...
7.92 0.74 9.53 10.31
186.94 206.11 224.56 242.74
10
20
...
900
30
...
40
... ... ... ... ... ... ...
...
965 965 965 965
... ... ... ...
... ... ... ...
965 965 965 965
11.13 11.91 12.70 14.27
261.82 279.94 298.26 334.58
...
...
...
...
965 965 965 965
15.88 17.48 19.05 20.62
371.70 408.46 444.41 480.24
...
...
...
...
...
...
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME 836.1OM-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'DI Customary Units Extra-Strong End Plain WallOutside NPS Diameter. Thickness.Weight. in. lblft [Note (1)l in.
347.26 371.63 395.53 419.35
...
...
... ... ...
... ...
38.000 38.000
38 38 38
443.47 467.50 491.07 38.000
32.37 0.312 40.000 45.83 0.344 40.000 5 0.375 40.000 4 0.406 40.000
40 40 40 40
40.000 40.000 40.000 40.000
40 40 40 40
0.438 0.469 0.500 0.562
185.24 198.19 211.13 236.93
40.000 40.000 40.000 40.000
40 40 40 40
0.625 0.688 0.750 0.812
263.07 289.13 314.69 340.16
... ... ... ...
40.000 40.000 40.000
40 40 40 40
0.875 0.938 1.000 1.062
365.97 391.68 416.91 442.05
... ... ... ...
... ... ... ...
... ...
... ... ...
... ...
40.000 40.000 40.000
40 40 40
1.125 1.188 1.250
467.52 492.90 517.80
42.000 42.000 42.000 42.000
42 42 42 42
0.344 0.375 0.406 0.438
153.18 166.86 180.52 194.60
42.000 42.000 42.000 42.000
42 42 42 42
0.469 0.500 0.562 0.625
208.22 221.82 248.95 276.44
42.000 42.000 42.000 42.000
42 42 42 42
0.688 0.750 0.812 0.875
303.84 330.72 357.52 384.67
42.000 42.000 42.000 42.000
42 42 42 42
0.938 1.000 1.062 1.125
... 411.74 438.29 ... 464.76 491.57
... ...
...
1 O00 1 O00 1 O00 1 O00
1016 1016 1016 1016
15.88 17.48 19.05 20.62
391.67 430.45 468.37 506.17
1 O00 1 O00 1 O00 1 O00
1 016 1 016 1 016 1 016
22.23 23.83 25.40 26.97
544.81 583.08 620.51 657.82
...
1 016
...
1 O00 1 O00 1 O00
1 016 1 016
28.58 30.18 31.75
695.96 733.73 770.67
... ...
... ...
1 067 1 067 1 067 1 067
8.74 9.53 10.31 1 1.1 3
228.10 248.53 268.67 289.82
...
1 067
1 1 1
11.91 12.70 14.27 15.88
309.90 330.21 370.48 41 1.64
1 1 1 O67 1
17.48 19.05 20.62 22.23
452.43 492.33 532.1 1 572.77
1 067 1 067 1 067 1 067
23.83 25.40 26.97 28.58
613.05 652.46 691.75 731.91
... ... ... ...
...
...
... ... ...
...
...
...
...
...
...
...
... ...
... ...
...
... ...
...
... ...
...
...
067. . . 067. . . 067
. . 067 .
. . .067
...
...067
... ... ...
16
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
275.82 294.92 314.23 352.53
...
xs ...
660.01 695.77 730.74
965 965 965
...30.18 ...31.75
11.13 11.91 12.70 14.27
... ...
...
. . .28.58
1 016 1 016 1 016 1 016
...
...
...
516.85 553.1 1 588.57 623.90
1 O00 1 O00 1 O00 1 O00
...
...
...
22.23 23.83 25.40 26.97
... ...
xs
STD
965 965 965 965
1 196.90 7.92 1 217.11 8.74 1016236.54 9.53 1016255.71 10.31
...
...
... ...
Mass. kglm
1016 O00 1016 O00 1 O00 1 O00
...
STD
40.000
End Plain WallOutside Schedule DN Diameter. Thickness. mm mm No. [Note (2)I
... ... ...
38.000
1.125 1.188 1.250
SI Units
...
38 38 38 38
38.000 38.000 38.000
0.875 0.938 1.000 1.062
Identification [Standard (STD). (XS). or Double Extra Strong lXXSll
...
S T D * A S M E B3b.LOM-ENGL 2000
WELDED AND WROUGHT SEAMLESS
PIPE
0757b70 Ob21754 573 D
ASME B36.10M-2000
STEEL
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE ICONT'D)
42 42
42O . oo
42O . oo
1.188 1.250
518.30 544.52
44 44 44 44
44O . oO
0.344
44.Ooo
44.m
0.406 0.438
160.54 174.80 189.20 203.97
44
44.Ooo
0.469
44.Ooo 44.Ooo
0.500 0.562 0.625
44.Ooo
44 44 44
44.Ooo
44 44
44.Ooo
44
44.000
44 44
44.Ooo
44 44 44 44 44
44.Ooo
46 46 46 46
46O . Oo 46O . oo 46.Ooo 46 O . oo 46O . oo 46O . oo
46 46 46 46
44.m 44.000
44.Ooo
44.Ooo 44O . oo 44.Ooo
46.Ooo
46O . oo
46 46 46 46 46
46 O . oo
0.375
0.688 0.750 0.812 0.875 0.938
318.55 346.76 374.88 403.38 431.79
1.o00 1.o62 1.125 1.188 1.250
459.67 487.47 515.63 543.70 57 1.25
0.344
167.89 182.90 197.88 213.33
0.375
0.406
0.438 0.469 0.625
228.27 243.20 272.98 303.16
0.688 0.750 0.812 0.875 0.938
333.26 362.79 392.24 422.09 451.85 481.O5 510.17 539.68 569.10 597.97 175.25 190.92 206.56 222.70
0.500 0.562
46 46 46 46 46
46O . oo 46O . oo 46O . oo
46O . oo
1.o00 1.o62 1.125 1.188 1.250
48
48.Ooo
0.344
48 48 48
48O . oo 48.Ooo
48.Ooo
218.25 232.51 260.97 289.80
0.375
0.406 0.438
Schodulo No. [Noto
ON
... ...
...
... ...
...
... ...
...
STO
...
... ... ... xs ...
...
... ... ...
...
...
... ... ... ...
... ... ... ... ... ... ... ... ...
... ... ... ... ... ... ...
.
.
...
... ... ...
STD
...
... ... xs ... ...
... ...
... ... ... ... ... ... ... ... ... STD ... ...
...
... ... ... ... ... ... ... ... ,.. ... ... ... ... .
f
.
... ... ... ...
17
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
I
(2I1
Outrido W d PhinEnd Diamotor, Thlcknou. Mur. mm mm kdm 1067 1067
30.18 31.75
771.69 810.80
100 1 100 1 100 1 1 100
1118 1118 1118 1118
9.53
260.52
10.31 11.13
281.64 303.82
100 1 1 100 100 1 1 100
1118 1 118 1 118 1 118
11.91 12.70 14.27 15.88
324.88 348.18 388.42 431.62
1 100 1 100 1 100 100 1 1 100
1 118 1 118 1 118 1 118 1 118
17.48 19.05 20.62 22.23 23.03
474.42 516.29 558.04 600.73 643.03
1 100 1 100 1 100 100 1 1 100
1 118 1 118 1 118 1 118 1 118
25.40 26.97 28.58 30.18 31.75
684.41 725.67 767.85 809.65 850.54
1168 1 168 1 168 1168
8.74 9.53 10.31 11.13
249.87 272.27 294.35 317.54
1 168 1 168 1 168 1168
11.91 12.70 14.27 15.88
339.56 361.84 406.02 451.20
1168 1 168 1 168 1168 1168
17.48 19.05 20.62 22.23 23.03
495.97 539.78 583.47 628.14 672.41
1168 1 168 1168 1 168 1168
25.40 26.97 28.58 30.18 31.75
715.73 758.92 803.09
1219 1219 1219 1 219
8.74 9.53 10.31 11.13
260.86 284.25 307.32 331.54
... ...
... ... ...
...
... ... ... ... ... ... ... ... ... ... ... 200 1 200 1 200 1 200 1
8.74
239.09
846.86
889.69
WELDED AND SEAMLESS WROUGHT PIPE STEEL
ASME B36.10~-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customaw Units Outside Diameter, NPS [Note (111
48.000 48.000 48.000
48.000
48 48 48 48
in.
48.000
Wall Plain End Thickness,Weight, in. lblft
0.469 0.500 0.562 0.625
Identification [Standard (STD), Extra-Strong (XSt, .or Double Extra Strong (XXSII
Schedule [Note No.
... xs
... ... ... ...
...378.83
... ...
...
409.61 440.80 471.90
... ...
238.30 253.89 285.00 316.52
48 48 48 48 48
48.000 48.000 48.000 48.000
0.688 0.750 0.812 0.875 0.938
48 48
48.000
48 48 48
48.000 48.000 48.000
1.o00 1.O62 1.125 1.188 1.250
502.43 532.88 563.73 594.50 624.70
52 52 52 52
52.000 52.000 52.000 52.000
0.375 0.406 0.438 0.469
206.95 223.93 241.42 258.36
52 52 52 52
52.000 52.000 52.000 52.000
0.500 0.562 0.625 0.688
275.27 309.03 343.25 377.39
...
52 52 52 52
52.000 52.000 52.000 52.000
0.750 0.81 2 0.875 0.938
41 0.90 444.33 478.21 512.01
... ... ... ...
52 52 52 52 52
52.000 52.000 52.000 52.000 52.000
1.o00 1.O62 1.125 1.188 1.250
545.19 578.29 61 1.84 645.30 678.1 5
...
56 56 56 56
56.000 56.000 56.000 56.000
0.375 0.406 0.438 0.469
222.99 241.29 260.15 278.41
56 56 56 56
56.000 56.000 56.000 56.000
0.500 0.562 0.625 0.688
296.65 333.06 369.97 406.80
56 56 56 56
56.000 56.000 56.000 56.000
0.750 0.812 0.875 0.938
442.97 479.05 51 5.63 552.12
48.000
SI Units
347.97
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
...
... ... ...
...
'
... ...
... ... ...
...
...
... ...
...
... ...
...
... ... ...
...
...
1219 1219 1 219 1219
11.91 12.70 14.27 15.88
354.54 377.81 423.97 471.17
1200 1200 1200 1200 1200
1219 1219 1219 1219 1219
17.48 19.05 20.62 22.23 23.83
517.95 563.74 609.40 656.10 702.38
1 200 1200 1 200 1 200 1 200
1219 1219 1219 1 219 1 219
25.40 26.97 28.58 30.18 31.75
747.67 792.84 839.04 884.82 929.62
..
1 321 1 321 1 321 1 321
9.53 10.31 11.13 11.91
308.23 333.26 359.54 384.50
... ...
...
...
1 321 1 321 1 321 1 321
12.70 14.27 15.88 17.48
409.76 459.86 511.12 561.93
...
1 321 1 321 1 321 1 321
19.05 20.62 22.23 23.83
61 1.66 661.27 712.02 762.33
...
1 321 1 321 1 321 1 321 1 321
25.40 26.97 28.58 30.18 31.75
811.57 860.69 910.93 960.74 1 009.49
1 400 1 400 1 400 1 400
1 422 1 422 1 422 1 422
9.53 10.31 11.13 11.91
331.96 358.94 387.26 414.17
1 400
1 422 1 422 1 422 1 422
12.70 14.27 15.88 17.48
441.39 495.41 550.67 605.46
1 422 1 422 1 422 1 422
19.05 20.62 22.23 23.83
659.1 1 71 2.63 767.39 821.68
...
... ... ... ... ... ... ... ...
...
... ...
...
... ...
...
1200 200 1 200 1 1200
...
...
...
Wall Plain End Outside DN Diameter, Thickness, Mass, mm kglm (211 mm
... ...
...
... ... ... ... ...
1 400 1 400 1 400
...
1 400
...
1 400 1 400
...
... ...
1 400
S T D *ASME
SEAMLESS WELDED AND
WROUGHT PIPE STEEL
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customary Units Outside Extra-Strong Wall End Plain NPS Diameter, Thickness,Weight, Iblft in. [Note (111 in.
587.95 1.000 56.000 062 56.000 659.94 1.125 56.000 696.10 .250 56.000
56 56 56 561.188 56
.375 60.000
60 60258.65 0.406 60.000 60.000 278.88 60 60
.469 60.000
.500 60.000 60 357.09 0.562 60.000 60 60 60.000 60
.750 60.000 0.812 60.000 875 60.000 ,938 60.000
Identification [Standard (STD), (XS), or Double Extra Strong (XXS)]
630.71 1.000 60.000 60 669.11 601.062 60.000 60708.05 1.125 60.000 746.90 601.188 60.000 60 60.000 785.05
1400 1400 1400 1400 1400
1422 1422 1422 1422 1422
25.40 26.97 28.58 30.18 31.75
874.83 927.86 982.12 1035.91 1 088.57
...
... ...
1 500 1 500 1 500 1 500
1 524 1 524 1 524 1 524
9.53 10.31 11.13 11.91
355.94 384.87 415.26 444.13
...
...
436.22
...
...
1 500 1 500 500 1 1 500
1 524 1 524 1 524 1 524
12.70 14.27 15.88 17.48
473.34 531.30 590.62 649.44
513.77
... ... ... ...
...
1 500 1 500 1 500 1 500
1 524 1 524 1 524 1 524
19.05 20.62 22.23 23.83
707.03 764.50 823.31 881.63
...
... ...
1500 1 500 1500 1 500 500 1
1524 1 524 1524 1 524 1 524
25.40 26.97 28.58 30.18 31.75
938.73 995.71 1 054.01 1111.83 1 168.44
1 600 1 600 1 600 1 600
1 626 1 626 1 626 1 626
9.53 10.31 11.13 11.91
379.91 410.81 443.25 474.09
1 600 1 600 1 600 1 600
1 626 1 626 1 626 1 626
12.70 14.27 15.88 17.48
505.29 567.20 630.56 693.41
... ...
1 600 1 600 1 600 1 600
1 626 1 626 1 626 1 626
19.05 20.62 22.23 23.83
754.95 816.37 879.23 941.57
...
1 600 1 600 1 600 1 600 1 600
1 626 1 626 1 626 1 626 1 626
25.40 26.97 28.58 30.18 31.75
1 002.62 1 063.55 1 125.90 1187.74 1 248.30
.. ... .. . ..
1 727 1 727 1 727 1 727
11.91 12.70 14.27 15.88
503.75 536.92 602.74 670.12
298.47
... ... ...
... ...
... ...
... ...
... ...
...
...
... ...
64.000 64.000 64.000
0.438 0.469
255.06 276.01 297.61 318.52
64 64 64 64
64.000 64.000 64.000 64.000
0.500 0.562 0.625 0.688
339.41 381.12 423.42 465.64
64 64 64 64
64.000 64.000 64.000 64.000
0.750 0.812 0.875 0.938
507.1 1
64 64 64 64 64
64.000 64.000 64.000 64.000 64.000
1.o00 1.O62 1.125 1.188 1.250
673.47 714.52 756.15 797.69 838.50
68 68 68 68
68.000 68.000 68.000 68.000
0.469 0.500 0.562 0.625
338.57 360.79 405.15 450.15
0.375 0.406
...
...
... ... ... ... ...
...
1.250
64 64 64 64
64.000
kglm
... ... ... ... ...
0.438
60 60 60 60
Mass,
... ... ... ...
731.60
0.625 0.688
End Plain WallOutside Schedule DN Diameter, Thickness, mm mm No. [Note (211
... 56.000
60.000 396.70
SI Units
548.49 590.46 632.34
... ...
... ...
. ..
*
... ...
... ...
... ... ...
... ...
...
... ... ... ...
...
... ...
...
...
...
...
...
...
...
19
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
WELDED AND SEAMLESS WROUGHT STEEL PIPE
ASME B36.10M-2000
TABLE 1 DIMENSIONS AND WEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customarv Units Wall Plain End Outside NPS Diameter. Thickness.Weight. lblft in in. [Note (111
.
68.000 68.000 68.000 68.000 68.000
68 68 68 68 68
0.688 0.750 0.812 0.875 0.938
495.06 539.18 583.21 627.87 672.45
68.000 68.000 68.000 68.000 68.000
68 68 68 68 68
1.000 1.062 1.125 1 188 1.250
716.23 759.93 804.26 848.49 891.95
382.17 0.500 72.000 72.000 72.000 72.000
72 72 72 72
0.562 0.625 0.688
429.18 476.87 524.48
750 12
72.000 72.000 72.000 72.000
72 72 72 72
72.000 72.000 72.000 1.188 72.000 72.000
72 72 72 72 72
3.55 .21
0.500 76 0.562 76 503.60 0.625 76 0.688 76 76.000 76.000
900.47
80.000 80.000 80.000
...
...
...
...
...
...
...
...
568.87 12.70
.
... ...
... ... ...
...
... 850.32 ... 800919.60
...
338.83
76.000 76.000 76.000 76.000
76.000 76.000
76 76 1.125 76 76 76
76.000 76.000 76.000 76.000 76.000
80 80 80
80 80 80 80
...
80.000
...
1. . . 758.99 829 852.36 30.18
600.50
...
800
...
800
...
...
...
1 ... 829
... ... ...
... ...
...
1
12.70
...
674.18
800 ... ... 800
0.750 0.812 0.875 0.938
603.32 652.65 702.70 752.66
... ... ... ...
... ...
1.000 1.062
801.75 850.75
...
...
1.188 1.250
950.09 998.85
0.562 0.625 0.688... 0.750
477.25 530.32 583.32 635.39
...
687.37 740.12 792.77
... ... ... ...
...
... ... ... ...
19.05 20.62 1
1 829 1 829 1 829
1
...
...
...31.75 930
...
... ...
... ... ...
...
...
... ...
...
... ...
...
1 060.87
1 829
31.75 407.25 1
19.05 1 930 20.62 1 930 22.23 1 930 23.83 1 930
...
990.52 22.23 23.83
1 829
... ... ... ... . . 25.40 . 930 ...26.97 930 ...
638.64 710.06 780.92
1129.78 25.40 26.97 198.57 1 1 268.98 28.58
1 1 930 1 930
...
824.45 17.48 897.77 970.96 1 045.89 1 120.22
1 1
1 193.05 1 265.74
. . 30.18 . 930 1
1414.01 1 486.33
1
2 O00 2000 2000 2000
2 032 2 032 2 032 2 032
14.27 15.88 17.48 19.05
710.08 789.56 868.43 945.69
2000 2000 2000 2000 25.40
2 032 2 032 2 032 2 032
20.62 22.23 23.83
1 022.83
20 c
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
736.95 802.40 867.73 934.60 1 000.92
14.27 15.88 17.48
1 829
... ... ... ...
... ... ... ...
... ...
829
.
Mass kglm
1 065.89 1130.73 1 197.09 1 262.92 1 327.39
25.40 1 727 26.97 1 727 28.58 1 727 30.18 1 727 31.75 1 727 1 1 829 1 829 1 829
1 800 1 1 800 1 1
17.48 19.05 20.62 22.23 23.83
1 727 1 727 1 727 1 727 1 727
1829 800 1 800 1 800 1 800
... 930 14.27 749.62 ... 15.88
...
...
0.812 0.875 0.938
...
... ...
... ...
.
.
...
...
0.938 1.000 1.062 1.125 1
. ... ...
...
805.34
Outside End Plain Wall Schedule DN Diameter. Thickness mm mm No [Note (211
... ... ...
... 712.55
SI Units
...
f
76 76 76 76
80
80.000 80.000 80.000 1 1.000 80.000
.
Identification [Standard (STDL Extra-Strong (XS). or Double Extra Strong (XXSH
1 101.81 1 180.17 1 256.94
STEEL PIPE
WELDED AND WROUGHT SEAMLESS
836.10M-2000 ASME
TABLE 1 DIMENSIONSANDWEIGHTS OF WELDED AND SEAMLESS WROUGHT STEEL PIPE (CONT'D) Customary Units Outride Wall Plain End NPS Diameter, Thickness,Weight, [Note (111 in. in. lblft 80.000
80 80
80
52.30 1.25080.000
80
80.000 80.000
1.062 1.125 1.188
896.17 948.57 1,000.89
Identification [Standard (STD), Extra-Strong (XS), or Double Extra Strong (XXS)]
SI Units Outside Wall End Plain DN Schedule Dlameter, Thickness, Mass, mm mm No. [Note lZ)l kglm
...
... ... ... ... ...
... ...
2000 2000 2000 2000
2 032 2 032 2 032 2 032
26.97 28.58 30.18 31.75
1 333.59 1 412.06 1 489.92 1 566.20
NOTES: (1) NPS (Nominal Pipe Size) is a dimensionless designator that has been substituted in the customary units section for the
previous term Inch Nominal Size. (2) DN (Nominal Diameter) is a dimensionless designator used in the SI (metric) system to describe pipe size.
21
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
AMERICAN NATIONAL STANDARDS FOR PRODUCT SIZES
Preferred Thicknesses for Uncoated Thin Flat Metals (Under 0.250 ln.). . B32.1-1952(R1994) Preferred Diameters for Round Wire - 0.500 Inches and Under ........ B32.2-1969(R1994) Preferred Metric Sizes for Flat Metal Products.. ...................... 832.3M-l984(R1994) Preferred Metric Sizes for Round, Square, Rectangle and Hexagon Metal Products .................................................... B32.4M-l980(R1994) Preferred Metric Sizes for Tubular Metal Products Other Than Pipe.. ... B32.5-1977(R1994) Preferred Metric Equivalents of Inch Sizes for Tubular Metal Products Other Than Pipe., ................................................. B32.6M-l984(R1994) .B36.10M-2000 Welded and Seamless Wrought Steel Pipe.. ............................... Stainless Steel Pipe.. ............................................... B36.19M-l985(R1994) The ASME Publications Catalog shows a complete list of all the Standards published by the Society. For a complimentary catalog, or the latest information about our publications, call 1-800-THE-ASME (1-800-843-2763).
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
ASME Services ASME is committed to developing and delivering technical information. At ASME's Information Central. we make every effort to answer your questions and expedite your orders. Our representatives are ready to assist youinthe following areas:
ASME Press Codes & Standards Credit Card Orders IMechE Publications Meetings & Conferences Member Dues Status
Member Services & Benefits Other ASME Programs Payment Inquiries Professional Development Short Courses Publications
Public Information Self-study Courses Shipping Information Subscriptions/Journals/Magazines Symposia Volumes Technical Papers
How can you reach us? It's easier than ever!
There are four options for making inquiries* or placing orders. Simply mail, phone,fax, or E-mail us and an Information Central representative will handle your request.
Mail Free Call Toll ASME US & Canada: 800-THE-ASME 22 Law Drive, (800-843-2763) Box 2900 Fairfield, New Jersey Mexico: 95-800-THE-ASME 800-843-2763) 07007-2900 Universal: 973-882- 1167
*
FU-24 hours E-Mail973-882-1717 hours 24 973-882-5155
[email protected]
Information Central staff are not permitted to answer inquiries about the technical content of this code or standard. Infomation as to whether or not technical inquiries are issued to this code or standard is shown on the copyright page. All technical inquiries must be submitted in writing to the staff secretary. Additional procedures for inquiries may be listed within.
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
COPYRIGHT American Society of Mechanical Engineers Licensed by Information Handling Services
